Controlled intracellular release of peptides from microcapsules enhances antigen presentation on MHC class I molecules

Genetic Diversity and Sequence Conservation of Peptide-Binding Regions of MHC Class I Genes in Pig, Cattle, Chimpanzee, and Human

Comparative analyses of MHC gene diversity and evolution across different species could offer valuable insights into the evolution of MHC genes. Intra- and inter-species sequence diversity and conservation of 12 classical major histocompatibility complex (MHC) class I genes from cattle, chimpanzees, pigs, and humans was analyzed using 20 representative allelic groups for each gene. The combined analysis of paralogous loci for each species revealed that intra-locus amino-acid sequence variations in the peptide-binding region (PBR) of MHC I genes did not differ significantly between species, ranging from 8.44% for SLA to 10.75% for BoLA class I genes. In contrast, intraspecies differences in the non-PBRs of these paralogous genes were more pronounced, varying from 4.59% for SLA to 16.89% for HLA. Interestingly, the Shannon diversity index and rate of nonsynonymous substitutions for PBR were significantly higher in SLA and BoLA than those in Patr and HLA. Analysis of peptide-binding pockets across all analyzed MHC class I genes of the four species indicated that pockets A and E showed the lowest and highest diversity, respectively. The estimated divergence times suggest that primate and artiodactyl MHC class I genes diverged 60.41 Mya, and BoLA and SLA genes diverged 35.34 Mya. These results offer new insights into the conservation and diversity of MHC class I genes in various mammalian species.

Light-Activated siRNA Endosomal Release (LASER) by Porphyrin Lipid Nanoparticles

Lipid nanoparticles (LNPs) have achieved clinical success in delivering small interfering RNAs (siRNAs) for targeted gene therapy. However, endosomal escape of siRNA into the cytosol remains a fundamental challenge for LNPs. Herein, we report a strategy termed light-activated siRNA endosomal release (LASER) to address this challenge. We established a porphyrin-LNP by incorporating porphyrin-lipids into the clinically approved Onpattro formulation. The porphyrin-LNP maintained the physical properties of an LNP and generated reactive oxygen species (ROS) when irradiated with near-infrared (NIR) light. Using confocal microscopy, we revealed that porphyrin-lipids within the LNP translocate to endosomal membranes during endocytosis. The translocated porphyrin-lipids generated ROS under light irradiation and enabled LASER through endosomal membranes disruption as observed through GAL-9 recruitment and transmission electron microscopy (TEM). By establishing a quantitative confocal imaging method, we confirmed that porphyrin-LNPs can increase siRNA endosomal escape efficiency by up to 2-fold via LASER and further enhance luciferase target knockdown by 4-fold more in luciferase-transfected prostate cancer cells. Finally, we formulated porphyrin-LNPs encapsulated with gold nanoparticles (GNP) and visualized the LASER effect within prostate tumors via TEM, confirming the light-activated endosomal membrane disruption and subsequent GNP release into cytosols in vivo. Overall, porphyrin-LNPs and the LASER approach enhanced siRNA endosomal escape and significantly improved knockdown efficacy. We believe the versatility of this technology could be applied to various LNP-based RNA therapeutics.

Cell Behavior Changes and Enzymatic Biodegradation of Hybrid Electrospun Poly(3-hydroxybutyrate)-Based Scaffolds with an Enhanced Piezoresponse after the Addition of Reduced Graphene Oxide

This is the first comprehensive study of the impact of biodegradation on the structure, surface potential, mechanical and piezoelectric properties of poly(3-hydroxybutyrate) (PHB) scaffolds supplemented with reduced graphene oxide (rGO) as well as cell behavior under static and dynamic mechanical conditions. There is no effect of the rGO addition up to 1.0 wt% on the rate of enzymatic biodegradation of PHB scaffolds for 30 d. The biodegradation of scaffolds leads to the depolymerization of the amorphous phase, resulting in an increase in the degree of crystallinity. Because of more regular dipole order in the crystalline phase, surface potential of all fibers increases after the biodegradation, with a maximum (361 ± 5 mV) after the addition of 1 wt% rGO into PHB as compared to pristine PHB fibers. By contrast, PHB-0.7rGO fibers manifest the strongest effective vertical (0.59 ± 0.03 pm V^-1 ) and lateral (1.06 ± 0.02 pm V^-1 ) piezoresponse owing to a greater presence of electroactive β-phase. In vitro assays involving primary human fibroblasts reveal equal biocompatibility and faster cell proliferation on PHB-0.7rGO scaffolds compared to pure PHB and nonpiezoelectric polycaprolactone scaffolds. Thus, the developed biodegradable PHB-rGO scaffolds with enhanced piezoresponse are promising for tissue-engineering applications.

Development of an Immortalized Porcine Fibroblast Cell Panel With Different Swine Leukocyte Antigen Genotypes

Immortalized cell lines are valuable resources to expand the molecular characterization of major histocompatibility complex genes and their presented antigens. We generated a panel of immortalized cell lines by transfecting human telomerase reverse transcriptase (hTERT) into primary fibroblast cells prepared from ear, fetal, and lung tissues of 10 pigs from five breeds and successfully cultured them for 30-45 passages. The cell growth characteristic of the immortalized fibroblasts was similar to that of primary fibroblast, which was unable to form colonies on soft agar. The genotypes of major swine leukocyte antigen (SLA) genes, including three classical class I (SLA-1, -2, and -3) and three class II genes (DQB1, DRB1, and DQA), were determined using high-resolution typing. A total of 58 alleles, including a novel allele for SLA-2, were identified. Each cell line was unique. A cell line derived from a National Institutes of Health miniature pig was homozygous across the six major SLA genes. The expression levels of SLA classical class I genes varied among the cell lines and were slightly upregulated in the immortalized compared to the primary cells based on semiquantitative reverse transcription polymerase chain reaction. The immortalized porcine fibroblast cell lines with diverse SLA haplotypes that were developed in this study have potential to be applied in studies regarding the molecular characteristics and genetic structure of SLA genes and epitope-major histocompatibility complex interactions in pigs.

Quantitative Assessment of Endosomal Escape of Various Endocytosed Polymer-Encapsulated Molecular Cargos upon Photothermal Heating

Encapsulated molecular cargos are efficiently endocytosed by cells. For cytosolic delivery, understanding the dynamic process of cargos release from the carrier vehicles used for encapsulation and the lysosomes where the carrier vehicles are trapped (which in general is the bottleneck), followed by diffusion in the cytosol is important for improving drug/gene delivery strategies. A methodology is reported to image this process on a millisecond scale and to quantitatively analyze the data. Polyelectrolyte capsules with embedded gold nanostars to encapsulate 43 fluorescent molecular cargos with diverse properties, ranging from small fluorophores to fluorescently labeled proteins, siRNA, etc., are used. By short laser irradiation intracellular release of the molecular cargos from endocytosed capsules into the cytosol is triggered, and their intracellular spreading is imaged. Most of the released molecular cargos evenly distribute inside the entire cell, while others are enriched in certain cell compartments. The time the different molecular cargos take to distribute within cells, i.e., the spreading time, is used as a quantifier. Quantitative analysis reveals that intracellular spread cannot be described by free diffusion, but is determined by interaction of the molecular cargo with intracellular components.

Hybrids of Polymeric Capsules, Lipids, and Nanoparticles: Thermodynamics and Temperature Rise at the Nanoscale and Emerging Applications

The importance of thermodynamics does not need to be emphasized. Indeed, elevated temperature processes govern not only industrial scale production but also self-assembly, chemical reaction, interaction between molecules, etc. Not surprisingly, biological processes typically take place at a specific temperature. Here, we look at possibilities to raise the localized temperature by a laser around noble-metal nanoparticles incorporated into shells of layer-by-layer polyelectrolyte microcapsules-freely suspended delivery vehicles in an aqueous solution, developed in the Department of Interfaces, Max Planck Institute of Colloids and Interfaces, headed by Helmuth Möhwald. Understanding the mechanisms of localized temperature rise is essential, that is why we analyze the influence of incident intensity, nanoparticle size, their distribution and aggregation state, as well as thermodynamics at the nanoscale. This leads us to scrutinize "global" (used for thermal encapsulation) versus "local" (used for release of encapsulated materials) temperature rise. Similar analysis is extended to planar polymeric coatings, the lipid membrane system of vesicles and cells, on which nanoparticles are adsorbed. Insights are provided into the mechanisms of physicochemical and biological effects, the nature of which has always been profoundly, interactively, and engagingly discussed in the Department of Interfaces. This analysis is combined with recent developments providing outlook and highlighting a broad range of emerging applications.

Hierarchy of Hybrid Materials-The Place of Inorganics-in-Organics in it, Their Composition and Applications

Hybrid materials, or hybrids incorporating both organic and inorganic constituents, are emerging as a very potent and promising class of materials due to the diverse, but complementary nature of the properties inherent of these different classes of materials. The complementarity leads to a perfect synergy of properties of desired material and eventually an end-product. The diversity of resultant properties and materials used in the construction of hybrids, leads to a very broad range of application areas generated by engaging very different research communities. We provide here a general classification of hybrid materials, wherein organics-in-inorganics (inorganic materials modified by organic moieties) are distinguished from inorganics-in-organics (organic materials or matrices modified by inorganic constituents). In the former area, the surface functionalization of colloids is distinguished as a stand-alone sub-area. The latter area-functionalization of organic materials by inorganic additives-is the focus of the current review. Inorganic constituents, often in the form of small particles or structures, are made of minerals, clays, semiconductors, metals, carbons, and ceramics. They are shown to be incorporated into organic matrices, which can be distinguished as two classes: chemical and biological. Chemical organic matrices include coatings, vehicles and capsules assembled into: hydrogels, layer-by-layer assembly, polymer brushes, block co-polymers and other assemblies. Biological organic matrices encompass bio-molecules (lipids, polysaccharides, proteins and enzymes, and nucleic acids) as well as higher level organisms: cells, bacteria, and microorganisms. In addition to providing details of the above classification and analysis of the composition of hybrids, we also highlight some antagonistic yin-&-yang properties of organic and inorganic materials, review applications and provide an outlook to emerging trends.

Multilayer Capsules Inside Biological Systems: State-of-the-Art and Open Challenges

There are many reports about the interaction of multilayer capsules with biological systems in the literature. A majority of them are devoted to the in vitro study with two-dimensional cell cultures. Multilayer capsule fabrication had been under intensive investigation from 1990s and 2000s by Prof. Helmuth Möhwald, and many of his followers further developed their own research directions, focusing on capsule implementation in various fields of biology and medicine. The aim of this future article is to consistently consider the most recent advances in cell-capsule interactions for different biomedical applications, including functionalization of clinically relevant cells, nonviral gene delivery, magnetization of cells to control their movement, and in vivo drug delivery. Finally, the description and discussion of the new trends and perspectives for improved functionalities of capsules in design and functionalization of cell-assisted drug vehicles are the major topics of this work.

Remotely controlled opening of delivery vehicles and release of cargo by external triggers

Tremendous efforts have been devoted to the development of future nanomedicines that can be specifically designed to incorporate responsive elements that undergo modification in structural properties upon external triggers. One potential use of such stimuli-responsive materials is to release encapsulated cargo upon excitation by an external trigger. Today, such stimuli-response materials allow for spatial and temporal tunability, which enables the controlled delivery of compounds in a specific and dose-dependent manner. This potentially is of great interest for medicine (e.g. allowing for remotely controlled drug delivery to cells, etc.). Among the different external exogenous and endogenous stimuli used to control the desired release, light and magnetic fields offer interesting possibilities, allowing defined, real time control of intracellular releases. In this review we highlight the use of stimuli-responsive controlled release systems that are able to respond to light and magnetic field triggers for controlling the release of encapsulated cargo inside cells. We discuss established approaches and technologies and describe prominent examples. Special attention is devoted towards polymer capsules and polymer vesicles as containers for encapsulated cargo molecules. The advantages and disadvantages of this methodology in both, in vitro and in vivo models are discussed. An overview of challenges associate with the successful translation of those stimuli-responsive materials towards future applications in the direction of potential clinical use is given.

Laser-induced remote release in vivo in C. elegans from novel silver nanoparticles-alginate hydrogel shells

Non-destructive, controllable, remote light-induced release inside cells enables studying time- and space-specific processes in biology. In this work we demonstrate the remote release of tagged proteins in Caenorhabditis elegans (C. elegans) worms using a near-infrared laser light as a trigger from novel hydrogel shells functionalized with silver nanoparticles responsive to laser light. A new type of hydrogel shells was developed capable of withstanding prolonged storage in the lyophilized state to enable the uptake of the shell by worms, which takes place on an agar plate under standard culture conditions. Uptake of the shells by C. elegans was confirmed using confocal laser scanning microscopy, while release from alginate shells in C. elegans and the laser effect on the shells on a substrate in air was followed using fluorescence microscopy. In addition, Raman microscopy was used to track the localization of particles to avoid the influence of autofluorescence. Hierarchical cluster spectral analysis is used to extract information about the biochemical composition of an area of a nematode containing the hydrogel shells, whose Raman signal is enhanced by the SERS (Surface Enhanced Raman Scattering) effect due to hot spots formed by silver nanoparticles present in the shells. The in vivo release demonstrated here can be used to study intestinal microbiota and probiotic compounds as well as a possible future strategy for gene delivery in the worms, other insects and other organisms.

Design and Synthesis of a Biocompatible 1D Coordination Polymer as Anti-Breast Cancer Drug Carrier, 5-Fu: In Vitro and in Vivo Studies

Designable coordination polymers with suitable chemical diversities and biocompatible structures have been proposed as a promising class of vehicles for drug delivery systems. Here, we hydrothermally synthesized a novel one-dimensional (1D) coordination polymer, [Zn(H₂O)₆K₂(H₂BTC)₂(H₂O)₄](H₂BTC)₂·2H₂O, where H₃BTC = benzene-1,3,5-tricarboxylic acid (trimesic acid), cp.1. As the hydrogen bonds stabilized 1D chains in three dimensions, the cp.1 could be a good candidate for delivering small-molecule chemotherapeutics such as 5-fluorouracil (5-Fu). The synthesized cp.1 showed a remarkable 5-Fu loading of 66% with encapsulation efficiency of 98% and almost complete release process. The 5-Fu-loaded cp.1 displayed a time-dependent cytotoxicity effect against breast cancer cell lines MCF-7 and 4T1. The cellular uptake of cp.1 particles was investigated via confocal laser scanning microscopy using fluorescein isothiocyanate and LysoTracker Red staining. Furthermore, the in vivo antitumor impact of 5-Fu-loaded cp.1 was studied on 4T1 breast cancer BALB/c mice model. The intratumor treatment of 5-Fu-loaded cp.1 demonstrated beneficial antitumor efficacy by postponing tumor growth. These results suggest that the 5-Fu-loaded cp.1 microparticles with a great locoregional delivery can be efficient anticancer drug carriers for further clinical treatments.

Protein A Functionalized Polyelectrolyte Microcapsules as a Universal Platform for Enhanced Targeting of Cell Surface Receptors

Targeted delivery systems recognizing specific receptors are a key element in personalized medicine. Such systems allow the delivery of therapeutics to desired sites of the body, increasing their local concentration and thus reducing the side effects. In this study, we fabricate chemically cross-linked (PAH/PAA)₂ microcapsules coated with specific cell-targeting antibodies in random (via direct covalent coupling to the surface) or optimized (via supporting layer of protein A) orientation. We use these antibody-functionalized capsules to target major histocompatibility complex (MHC) class I receptors in living cells and quantify the efficiency of targeting by flow cytometry. We show for the first time the selective binding of polyelectrolyte microcapsules to MHC class I receptors, and confirm that targeting is allotype-specific. Remarkably, protein A assisted immobilization of antibodies enhances targeting efficiency by 40-50% over capsules with randomly attached antibodies. Moreover, biofunctionalized capsules reveal low levels of cytotoxicity and nonspecific binding, excluding the need of additional modification with poly(ethylene glycol). Thus, protein A coated (PAH/PAA)₂ microcapsules represent a unique example of universal targeting tools providing high potential for selective binding to a broad range of cell surface receptors.

Ultrafast Near-Infrared Light-triggered Intracellular Uncaging to Probe Cell Signaling

The possibility of regulating cell signaling with high spatial and temporal resolution within individual cells and complex cellular networks has important implications in biomedicine. In this report, we demonstrate a general strategy that uses near-infrared tissue-penetrating laser pulses to uncage biomolecules from plasmonic gold-coated liposomes, i.e. plasmonic liposomes, to activate cell signaling in a non-thermal, ultrafast and highly controllable fashion. Near-infrared picosecond laser pulse induces transient nanobubbles around plasmonic liposomes. The mechanical force generated from the collapse of nanobubbles rapidly ejects encapsulated compound within 0.1 ms. We showed that single pulse irradiation triggers the rapid intracellular uncaging of calcein from plasmonic liposomes inside endo-lysosomes. The uncaged calcein then evenly distributes over the entire cytosol and nucleus. Furthermore, we demonstrated the ability to trigger calcium signaling in both an immortalized cell line and primary dorsal root ganglion (DRG) neurons by intracellular uncaging of inositol triphosphate (IP3), an endogenous cell calcium signaling second messenger. Compared with other uncaging techniques, this ultrafast near-infrared light-driven molecular uncaging method is easily adaptable to deliver a wide range of bioactive molecules with an ultrafast optical switch, enabling new possibilities to investigate signaling pathways within individual cells and cellular networks.

Multifunctional polyelectrolyte microcapsules as a contrast agent for photoacoustic imaging in blood

The polyelectrolyte microcapsules that can be accurate either visualized in biological media or in tissue would enhance their further in vivo application both as a carrier of active payloads and as a specific sensor. The immobilization of active species, for instance fluorescent dyes, quantum dots, metal nanoparticles, in polymeric shell enables visualization of capsules by optical imaging techniques in aqueous solution. However, for visualization of capsules in complex media an instrument with high contrast modality requires. Herein, we show for the first time photoacoustic imaging (PAI) of multifunctional microcapsules in water and in blood. The microcapsules exhibit greater photoacoustic intensity compare to microparticles with the same composition of polymeric shell presumably their higher thermal expansion. Photoacoustic intensity form microcapsules dispersed in blood displays an enhancement (2-fold) of signal compare to blood. Photoacoustic imaging of microcapsules might contribute to non-invasive carrier visualization and further their in vivo distribution.

Surface modification of microparticles causes differential uptake responses in normal and tumoral human breast epithelial cells

The use of micro- and nanodevices as multifunctional systems for biomedical applications has experienced an exponential growth during the past decades. Although a large number of studies have focused on the design and fabrication of new micro- and nanosystems capable of developing multiple functions, a deeper understanding of their interaction with cells is required. In the present study, we evaluated the effect of different microparticle surfaces on their interaction with normal and tumoral human breast epithelial cell lines. For this, AlexaFluor488 IgG functionalized polystyrene microparticles (3 μm) were coated with Polyethyleneimine (PEI) at two different molecular weights, 25 and 750 kDa. The effect of microparticle surface properties on cytotoxicity, cellular uptake and endocytic pathways were assessed for both normal and tumoral cell lines. Results showed a differential response between the two cell lines regarding uptake efficiency and mechanisms of endocytosis, highlighting the potential role of microparticle surface tunning for specific cell targeting.

Microfluidic Single-Cell Analysis with Affinity Beads

A micrometer-sized affinity bead (red) is (i) taken up into a cell by phagocytosis, (ii) photochemically released from phagosomes, (iii) optically trapped by the cell, and (iv) isolated by cell lysis for subsequent analysis of captured intracellular analyte (green).

Spatio-Temporal Control of LbL Films for Biomedical Applications: From 2D to 3D

Introduced in the '90s by Prof. Moehwald, Lvov, and Decher, the layer-by-layer (LbL) assembly of polyelectrolytes has become a popular technique to engineer various types of objects such as films, capsules and free standing membranes, with an unprecedented control at the nanometer and micrometer scales. The LbL technique allows to engineer biofunctional surface coatings, which may be dedicated to biomedical applications in vivo but also to fundamental studies and diagnosis in vitro. Initially mostly developed as 2D coatings and hollow capsules, the range of complex objects created by the LbL technique has greatly expanded in the past 10 years. In this Review, the aim is to highlight the recent progress in the field of LbL films for biomedical applications and to discuss the various ways to spatially and temporally control the biochemical and mechanical properties of multilayers. In particular, three major developments of LbL films are discussed: 1) the new methods and templates to engineer LbL films and control cellular processes from adhesion to differentiation, 2) the major ways to achieve temporal control by chemical, biological and physical triggers and, 3) the combinations of LbL technique, cells and scaffolds for repairing 3D tissues, including cardio-vascular devices, bone implants and neuro-prosthetic devices.

Multifunctional gold nanorods for selective plasmonic photothermal therapy in pancreatic cancer cells using ultra-short pulse near-infrared laser irradiation

Gold nanorods (AuNRs) have attracted considerable attention in plasmonic photothermal therapy for cancer treatment by exploiting their selective and localized heating effect due to their unique photophysical properties. Here we describe a strategy to design a novel multifunctional platform based on AuNRs to: (i) specifically target the adenocarcinoma MUC-1 marker through the use of the EPPT-1 peptide, (ii) enhance cellular uptake through a myristoylated polyarginine peptide (MPAP) and (iii) selectively induce cell death by ultra-short near infrared laser pulses. We used a biotin-avidin based approach to conjugate EPPT-1 and MPAP to AuNRs. Dual-peptide (EPPT-1+MPAP) labelled AuNRs showed a significantly higher uptake by pancreatic ductal adenocarcinoma cells when compared to their single peptide or avidin conjugated counterparts. In addition, we selectively induced cell death by ultra-short near infrared laser pulses in small target volumes (∼1 μm3), through the creation of plasmonic nanobubbles that lead to the destruction of a local cell environment. Our approach opens new avenues for conjugation of multiple ligands on AuNRs targeting cancer cells and tumors and it is relevant for plasmonic photothermal therapy.

Silk macromolecules with amino acid-poly(ethylene glycol) grafts for controlling layer-by-layer encapsulation and aggregation of recombinant bacterial cells

This study introduces double-brush designs of functionalized silk polyelectrolytes based upon regenerated silk fibroin (SF), which is modified with poly-L-lysine (SF-PLL), poly-L-glutamic acid (SF-PGA), and poly(ethylene glycol) (PEG) side chains with different grafting architecture and variable amino acid-PEG graft composition for cell encapsulation. The molecular weight of poly amino acids (length of side chains), molecular weight and degree of PEG grafting (D) were varied in order to assess the formation of cytocompatible and robust layer-by-layer (LbL) shells on two types of bacterial cells (Gram-negative and Gram-positive bacteria). We observed that shells assembled with charged polycationic amino acids adversely effected the properties of microbial cells while promoting the formation of large cell aggregates. In contrast, hydrogen-bonded shells with high PEG grafting density were the most cytocompatible, while promoting formation of stable colloidal suspensions of individual cell encapsulates. The stability to degradation of silk shells (under standard cell incubation procedure) was related to the intrinsic properties of thermodynamic bonding forces, with shells based on electrostatic interactions having stronger resistance to deterioration compared to pure hydrogen-bonded silk shells. By optimizing the charge density of silk polyelectrolytes brushes, as well as the length and the degree of PEG side grafts, robust and cytocompatible cell coatings were engineered that can control aggregation of cells for biosensor devices and other potential biomedical applications.

Gold nanodome-patterned microchips for intracellular surface-enhanced Raman spectroscopy

Top-down patterned gold nanodome microchips are taken up by living cells and serve as a uniform and reproducible sensor for intracellular surface-enhanced Raman scattering.

Preparation of elastic polyurethane microcapsules using CaCO3 microparticles as templates for hydrophobic substances loading

Elastic polyurethane (PU) microcapsules were fabricated via a simple and well controllable adsorption and crosslinking method on porous CaCO₃ templates in organic solvent.

Nanoplasmonically-induced defects in lipid membrane monitored by ion current: transient nanopores versus membrane rupture

We have developed a nanoplasmonic-based approach to induce nanometer-sized local defects in the phospholipid membranes. Here, gold nanorods and nanoparticles having plasmon resonances in the near-infrared (NIR) spectral range are used as optical absorption centers in the lipid membrane. Defects optically induced by NIR-laser irradiation of gold nanoparticles are continuously monitored by high-precision ion conductance measurement. Localized laser-mediated heating of nanorods and nanoparticle aggregates cause either (a) transient nanopores in lipid membranes or (b) irreversible rupture of the membrane. To monitor transient opening and closing, an electrophysiological setup is assembled wherein a giant liposome is spread over a micrometer hole in a glass slide forming a single bilayer of high Ohmic resistance (so-called gigaseal), while laser light is coupled in and focused on the membrane. The energy associated with the localized heating is discussed and compared with typical elastic parameters in the lipid membranes. The method presented here provides a novel methodology for better understanding of transport across artificial or natural biological membranes.

Lipid membranes in external electric fields: kinetics of large pore formation causing rupture

About 40 years ago, Helfrich introduced an elastic model to explain shapes and shape transitions of cells (Z Naturforsch C, 1973; 28:693). This seminal article stimulated numerous theoretical as well as experimental investigations and created new research fields. In particular, the predictive power of his approach was demonstrated in a large variety of lipid model system. Here in this review, we focus on the development with respect to planar lipid membranes in external electric fields. Stimulated by the early work of Helfrich on electric field forces acting on liposomes, we extended his early approach to understand the kinetics of lipid membrane rupture. First, we revisit the main forces determining the kinetics of membrane rupture followed by an overview on various experiments. Knowledge on the kinetics of defect formation may help to design stable membranes or serve for novel mechanism for controlled release.

Injection of ligand-free gold and silver nanoparticles into murine embryos does not impact pre-implantation development

Intended exposure to gold and silver nanoparticles has increased exponentially over the last decade and will continue to rise due to their use in biomedical applications. In particular, reprotoxicological aspects of these particles still need to be addressed so that the potential impacts of this development on human health can be reliably estimated. Therefore, in this study the toxicity of gold and silver nanoparticles on mammalian preimplantation development was assessed by injecting nanoparticles into one blastomere of murine 2 cell-embryos, while the sister blastomere served as an internal control. After treatment, embryos were cultured and embryo development up to the blastocyst stage was assessed. Development rates did not differ between microinjected and control groups (gold nanoparticles: 67.3%, silver nanoparticles: 61.5%, sham: 66.2%, handling control: 79.4%). Real-time PCR analysis of six developmentally important genes (BAX, BCL2L2, TP53, OCT4, NANOG, DNMT3A) did not reveal an influence on gene expression in blastocysts. Contrary to silver nanoparticles, exposure to comparable Ag(+)-ion concentrations resulted in an immediate arrest of embryo development. In conclusion, the results do not indicate any detrimental effect of colloidal gold or silver nanoparticles on the development of murine embryos.

UV light stimulated encapsulation and release by polyelectrolyte microcapsules

Layer-by-layer assembled polyelectrolyte capsules with well-controlled architectures and great versatility have been the subject of great interest, due to their unique advantages and tremendous potentials of being excellent candidates in multidisciplinary fields. UV light responsive microcapsules, as one class of the stimuli responsive capsules, possess the abilities to active their functionalities by responding to the UV stimulus remotely without requirement of direct contact or interaction. Therefore, any advances in this field will be of great value for the establishment of approaches to fabricate UV responsive polyelectrolyte capsules for desired uses. This review presents current development of UV responsive capsules, with emphasis on the underlying design strategies and their potential applications as delivery vesicles. In particular, UV-stimulated capsule functionalities, such as cargo encapsulation, release and combined multifunctionalities by the multilayers, have been addressed.

Fabrication of triple-labeled polyelectrolyte microcapsules for localized ratiometric pH sensing

Encapsulation of pH sensitive fluorophores as reporting molecules provides a powerful approach to visualize the transportation of multilayer capsules. In this study, two pH sensitive dyes (fluorescein and oregon green) and one pH insensitive dye (rhodamine B) were simultaneously labeled on the microcapsules to fabricate ratiometric pH sensors. The fluorescence of the triple-labeled microcapsule sensors was robust and nearly independent of other intracellular species. With a dynamic pH measurement range of 3.3-6.5, the microcapsules can report their localized pH at a real time. Cell culture experiments showed that the microcapsules could be internalized by RAW 246.7 cells naturally and finally accumulated in acidic organelles with a pH value of 5.08 ± 0.59 (mean ± s.d.; n=162).

Fabrication of red-blood-cell-like polyelectrolyte microcapsules and their deformation and recovery behavior through a microcapillary

Multilayer microcapsules with a biconcave discoidal shape mimicking red blood cells (RBCs) are fabricated. The structure of the RBC-like microcapsules is verified by scanning electron and confocal laser scanning microscopies. The capsules show elastic deformation after being forced through a microcapillary with a smaller diameter, exhibiting a high recovery ratio of ≈90%. When the capsules are coated with hemoglobin (Hb),they are able to reversibly bind and release oxygen.

25th anniversary article: Dynamic interfaces for responsive encapsulation systems

Encapsulation systems are urgently needed both as micrometer and sub-micrometer capsules for active chemicals' delivery, to encapsulate biological objects and capsules immobilized on surfaces for a wide variety of advanced applications. Methods for encapsulation, prolonged storage and controllable release are discussed in this review. Formation of stimuli responsive systems via layer-by-layer (LbL) assembly, as well as via mobile chemical bonding (hydrogen bonds, chemisorptions) and formation of special dynamic stoppers are presented. The most essential advances of the systems presented are multifunctionality and responsiveness to a multitude of stimuli - the possibility of formation of multi-modal systems. Specific examples of advanced applications - drug delivery, diagnostics, tissue engineering, lab-on-chip and organ-on-chip, bio-sensors, membranes, templates for synthesis, optical systems, and antifouling, self-healing materials and coatings - are provided. Finally, we try to outline emerging developments.

Microgel-based etalon coated quartz crystal microbalances for detecting solution pH: The effect of Au overlayer thickness

Poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgels were "painted" on the Au electrode of a quartz crystal microbalance (QCM). Another Au layer (overlayer) was subsequently deposited on the microgel layer. This structure is known as a microgel-based etalon. These devices have been shown to exhibit optical properties (i.e., color) that depend on solution pH and temperature, among other things. Previously, we measured QCM frequency shifts that are a result of solution pH changes; the frequency shifts are a direct result of the pH dependent solvation state of the microgels that make up the etalon. In fact, the shifts observed for the etalons were much greater in magnitude than just a microgel layer immobilized on the QCM crystal without the Au overlayer. We reasoned that the Au overlayer lead to an enhancement of the observed frequency change due to its mass. In this submission we investigate how the Au overlayer thickness (mass) affects the observed sensitivity to solution pH. We found that the change in QCM resonant frequency depended dramatically on the mass of the Au overlayer.

Label-free detection of low protein concentration in solution using a novel colorimetric assay

Dual pH and temperature sensitive microgel-based etalons were fabricated by sandwiching a "monolithic" microgel layer between two semitransparent, Au layers. The devices exhibit visual color and multipeak reflectance spectra, both of which primarily depend on the distance between the Au surfaces mediated by the microgel diameter. We found that a polycationic polyelectrolyte can penetrate through the Au overlayer to interact with negatively charged microgel confined between Au overlayers. In this submission we report that biotinylated polycationic polymer can penetrate through the Au overlayer of a poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel-based etalon and cause the microgel layer to collapse. The collapse results in a shift in the spectral peaks of the reflectance spectra. We found that the extent of peak shift depends on the amount of biotinylated polycation added to the etalon, which can subsequently be used to determine the concentration of streptavidin in solution at pM concentrations.

Silver nanoscale antisense drug delivery system for photoactivated gene silencing

The unique photophysical properties of noble metal nanoparticles contribute to their potential as photoactivated drug delivery vectors. Here we demonstrate the synthesis and characterization of 60-80 nm silver nanoparticles (SNPs) decorated with thiol-terminated photolabile DNA oligonucleotides. In vitro assays and fluorescent confocal microscopy of treated cell cultures show efficient UV-wavelength photoactivation of surface-tethered caged ISIS2302 antisense oligonucleotides possessing internal photocleavable linkers. As a demonstration of the advantages of these novel nanocarriers, we investigate properties including: enhanced stability to nucleases, increased hybridization activity upon photorelease, and efficient cellular uptake as compared to commercial transfection vectors. Their potential as multicomponent delivery agents for oligonucleotide therapeutics is shown through regulation of ICAM-1 (Intracellular Adhesion Molecule-1) silencing. Our results suggest a means to achieve light-triggered, spatiotemporally controlled gene silencing via nontoxic silver nanocarriers, which hold promise as tailorable platforms for nanomedicine, gene expression studies, and genetic therapies.

Smart Layer-by-Layer Assemblies for Drug Delivery

Layer-by-layer (LbL) assembly is an effective tool for development of surface coatings and capsules for localized, controlled delivery of bioactive molecules. Because of the unprecedented versatility of the technique, a broad range of nanoobjects, including molecules, particles, micelles, vesicles and others with diverse chemistry and architecture can be used as building blocks for LbL assemblies, opening various routes for inclusion and delivery of functional molecules to/from LbL films. Moreover, the LbL technique continues to show its power in constructing three-dimensional (3D) delivery containers, in which LbL walls can additionally control delivery of functional molecules incorporated in the capsule interior. In this chapter, we discuss recent progress in the use of LbL assemblies to control release of therapeutic compounds via diffusion, hydrolytic degradation, pH, ionic strength or temperature variations, application of light, ultrasound, electric and magnetic field stimuli, redox activation or biological stimuli.

Towards theranostic multicompartment microcapsules: in-situ diagnostics and laser-induced treatment

Paving the way towards the application of polyelectrolyte multilayer capsules in theranostics, we describe diagnostic multi-functionality and drug delivery using multicompartment polymeric capsules which represent the next generation of drug delivery carriers. Their versatility is particularly important for potential applications in the area of theranostics wherein the carriers are endowed with the functionality for both diagnostics and therapy. Responsiveness towards external stimuli is attractive for providing controlled and on-demand release of encapsulated materials. An overview of external stimuli is presented with an emphasis on light as a physical stimulus which has been widely used for activation of microcapsules and release of their contents. In this article we also describe existing and new approaches to build multicompartment microcapsules as well as means available to achieve controlled and triggered release from their subcompartments, with a focus on applications in theranostics. Outlook for future directions in the area are highlighted.

Nanoengineered colloidal probes for Raman-based detection of biomolecules inside living cells

Gold nanoparticle aggregate carbon nanotube functionalized colloidal particles serve as an efficient platform for probing the intracellular environment. The probes provide the means of effective localization of signal and detection of molecular fingerprints of biomolecules in living cells. The approach demonstrated in this work opens significant opportunities in molecular imaging as well as intracellular sensing and trafficking.

Advanced materials and processing for drug delivery: the past and the future

Design and synthesis of efficient drug delivery systems are of vital importance for medicine and healthcare. Materials innovation and nanotechnology have synergistically fueled the advancement of drug delivery. Innovation in material chemistry allows the generation of biodegradable, biocompatible, environment-responsive, and targeted delivery systems. Nanotechnology enables control over size, shape and multi-functionality of particulate drug delivery systems. In this review, we focus on the materials innovation and processing of drug delivery systems and how these advances have shaped the past and may influence the future of drug delivery.

NIR-activated content release from plasmon resonant liposomes for probing single-cell responses

Technological limitations have prevented the interrogation and manipulation of cellular activity in response to bioactive molecules within model and living systems that is required for the development of diagnostic and treatment modalities for diseases, such as cancer. In this work, we demonstrate that gold-coated liposomes are capable of encapsulation and on-demand release of signaling molecules with a spatial and temporal resolution leading to activation of individual cells. As a model system, we used cells modified to overexpress a certain G-protein coupled receptor, the CCK2 receptor, and achieved its activation in a single cell via the localized release of its agonist. This content release was triggered by illumination of the liposomes at wavelengths corresponding to the plasmon resonance of the gold coating. The use of plasmon resonant liposomes may enable on-demand release of a broad range of molecules using biologically safe near-infrared light and without molecule chemical modification. In combination with the spectral tunability of plasmon resonant coating, this technology may allow for multiplexed interrogation of complex and diverse signaling pathways in model or living tissues with unprecedented spatial and temporal control.

Red blood cells and polyelectrolyte multilayer capsules: natural carriers versus polymer-based drug delivery vehicles

INTRODUCTION

Red blood cells (RBCs) and lipid-based carriers on the one hand and polymeric capsules on the other hand represent two of the most widely used carriers in drug delivery. Each class of these carriers has its own set of properties, specificity and advantages. Thorough comparative studies of such systems are reported here for the first time.

AREAS COVERED

In this review, RBCs are described in comparison with synthetic polymeric drug delivery vehicles using polyelectrolyte multilayer capsules as an example. Lipid-based composition of the shell in the former case is particularly attractive due to their inherent biocompatibility and flexibility of the carriers. On the other hand, synthetic approaches to fabrication of polyelectrolyte multilayer capsules permit manipulation of the permeability of their shell as well as tuning their composition, mechanical properties, release methods and targeting.

EXPERT OPINION

In conclusion, properties of RBCs and polyelectrolyte multilayer capsules are reported here highlighting similarities and differences in their preparation and applications. In addition, their advantages and disadvantages are discussed.

Precision intracellular delivery based on optofluidic polymersome rupture

We present an optical approach for intracellular delivery of molecules contained within oxidation-sensitive polymersomes. The photosensitizer ethyl eosin is associated with the polymersome membrane to oxidatively increase the hydrophilicity of the hydrophobic block under optical excitation. This optofluidic interaction induces rapid polymersome rupture and payload release via the reorganization of the aggregate structure into smaller diameter vesicles and micelles. When the particles are endocytosed by phagocytes, such as RAW macrophages and dendritic cells, the polymersomes' payload escapes the endosome and is released in the cell cytosol within a few seconds of illumination. The released payload is rapidly distributed throughout the cytosol within milliseconds. The presented optofluidic method enables fast delivery and distribution throughout the cytosol of individual cells, comparable to photochemical internalization, but a factor of 100 faster than similar carrier mediated delivery methods (e.g., liposomes, polymersomes, or nanoparticles). Due to the ability to simultaneously induce payload delivery and endosomal escape, this approach can find applications in detailed characterizations of intra- and intercellular processes. As an example in quantitative cell biology, a peptide antigen was delivered in dendritic cells and MHC I presentation kinetics were measured at the single cell and single complex level.