Flexible, transparent, conducting films of randomly stacked graphene from surfactant-stabilized, oxide-free graphene dispersions

Molecular Chain Interpenetration-Enabled High Interfacial Compatibility of Ionic and Electronic Conductors for Stretchable Ionic Devices

Ionic devices find applications such as flexible electronics and biomedicines and function by exploiting hybrid circuits of mobile ions and electrons. However, the poor interfacial compatibility of hard electronic conductors with soft ionic conductors in ionic devices leads to low deformability, sensitivity, electromechanical responses, and stability. Herein, an interpenetrating interface between silicone-modified polyurethane/carbon nanotube electronic conductors and ionoelastomers in an ionic device using in situ polymerization is fabricated. A robust interpenetrating electronic/ionic conductor interface is realized through molecular chain entanglement and molecular forces (such as ion-dipole interactions and H-bonds), effectively enhancing the bonding strength and contact area between the components and resulting in an excellent flexibility, stability, and device performance. The electroadhesive prepared based on this strategy exhibits a superrobust shear strength of 317 kPa under a reduced voltage input of -4 V, and the diode and the transistor can undergo arbitrary deformation while maintaining the semiconductor device characteristics, including rectification and switching. In addition, electromechanical transducers exhibit sensitive electrical responses to various deformation signals. This solution to the interfacial compatibility problems of electronic and ionic conductors holds promise for the development of multifunctional ionic devices.

Sensing with Thermally Reduced Graphene Oxide under Repeated Large Multi-Directional Strain

This paper presents a recent investigation into the electromechanical behavior of thermally reduced graphene oxide (rGO) as a strain sensor undergoing repeated large mechanical strains up to 20.72%, with electrical signal output measurement in multiple directions relative to the applied strain. Strain is one the most basic and most common stimuli sensed. rGO can be synthesized from abundant materials, can survive exposure to large strains (up to 20.72%), can be synthesized directly on structures with relative ease, and provides high sensitivity, with gauge factors up to 200 regularly reported. In this investigation, a suspension of graphene oxide flakes was deposited onto Polydimethylsiloxane (PDMS) substrates and thermally reduced to create macroscopic rGO-strain sensors. Electrical resistance parallel to the direction of applied tension (x^) demonstrated linear behavior (similar to the piezoresistive behavior of solid materials under strain) up to strains around 7.5%, beyond which nonlinear resistive behavior (similar to percolative electrical behavior) was observed. Cyclic tensile testing results suggested that some residual micro-cracks remained in place after relaxation from the first cycle of tensile loading. A linear fit across the range of strains investigated produced a gauge factor of 91.50(Ω/Ω)/(m/m), though it was observed that the behavior at high strains was clearly nonlinear. Hysteresis testing showed high consistency in the electromechanical response of the sensor between loading and unloading within cycles as well as increased consistency in the pattern of the response between different cycles starting from cycle 2.

Investigating the optical and electrical performance of rod coated silver nanowire-based transparent conducting films

Silver nanowires (Ag NWs) are highly promising building blocks for developing transparent conducting films (TCFs) due to their high electrical conductivity and good optical transparency. The large-scale production of Ag NW-based high-quality TCFs using low-cost processing methods can replace the traditional oxide based TCFs. Therefore, developing a reliable technique for large-scale fabrication of Ag NW-based TCFs is vital. This work involves the synthesis of Ag NWs, the fabrication of large-area Ag NW-based TCFs using a simple rod coating process, its optimization, and the performance analysis of the fabricated TCFs, including their demonstration as transparent heaters. The polyol synthesis method produces Ag NWs of lengths ranging from 25-110µm and diameters from 80-180 nm. The effect of Ag NW length, the number of coating passes, and the volume of the NW dispersion used per coating pass on the electrical and optical properties of the TCFs are studied by quantifying sheet resistance(Rs)and transmittance (T) of the film. The performance of the fabricated film is evaluated by estimating the figure of merit (FoM) in both percolative and bulk regimes. The TCF made with NWs of length 25.7µm and diameter 85.1 nm had the largest value of bulk FoM (101.3), percolative FoM (43.9), and, conductivity exponent (0.6). This elucidated the superior performance of the fabricated TCFs over those fabricated by other techniques. The critical thickness of the film (tmin), at the crossover between the percolation and bulk, scales with the shortest dimension of the NW, namely its diameter. The percolative FoM showed an increase, with a decrease in both sheet resistance and diameter of the NWs, with lowern. The fabricated TCF is tested as a transparent heater and the demonstration proves that rod coated Ag NW-based TCFs can be used for transparent electrode applications.

Exploring cyclic olefin copolymer (COC) for flexible silver nanowire electrode

The development of flexible electronic devices has been a primary focus in various fields, and silver nanowire (Ag NW) networks show significant promise due to their unique electrical and mechanical properties. However, achieving well-defined and stable nanowire coatings on polymer substrates remains challenging. This work presents a novel and simple approach for directly coating Ag NWs on cyclic olefin copolymer (COC) substrates utilizing ultraviolet/ozone (UVO) treatment, a method not previously demonstrated for this specific material system up to our knowledge. The compatibility of this approach with COC eliminates the need for complex pre- and post-treatment processes, making it a more straightforward and environmentally friendly way to improve adhesion between Ag NWs and COC. The Ag NWs/COC electrodes exhibited excellent optoelectrical performance, with a high optical transmittance of 84% and a low sheet resistance of 13 Ω/sq-metrics that compare favorably to industry standards for transparent conductive films. Additionally, the Ag NWs/COC electrodes displayed excellent mechanical stability, showing no changes in sheet resistance after both tape adhesion and film bending tests. The novelty of the presented Ag NW-COC system, combined with the simplicity and environmental benefits of the UVO coating approach, as well as the demonstrated performance and stability of the resulting electrodes, make this work a significant advancement towards realizing the commercial potential of flexible electronics for biocompatible and wearable device applications.

Unveiling Liquid-Phase Exfoliation of Graphite and Boron Nitride Using Fluorescent Dyes Through Combined Experiments and Simulations

Liquid-phase exfoliation (LPE) in aqueous solutions provides a simple, scalable, and green approach to produce 2D materials. By combining atomistic simulations with exfoliation experiments, the interaction between a surfactant and a 2D layer at the molecular scale can be better understood. In this work, two different dyes, corresponding to rhodamine B base (Rbb) and to a phenylboronic acid BODIPY (PBA-BODIPY) derivative, are employed as dispersants to exfoliate graphene and hexagonal boron nitride (hBN) through sonication-assisted LPE. The exfoliated 2D sheets, mostly as few-layers, exhibit good quality and high loading of dyes. Using molecular dynamics (MD) simulations, the binding free energies are calculated and the arrangement of both dyes on the layers are predicted. It has been found that the dyes show a higher affinity toward hBN than graphene, which is consistent with the higher yields of exfoliated hBN. Furthermore, it is demonstrated that the adsorption behavior of Rbb molecules on graphene and hBN is quite different compared to PBA-BODIPY.

Performance analysis of solution-processed nanosheet strain sensors-a systematic review of graphene and MXene wearable devices

Nanotechnology has led to the realisation of many potentialInternet of Thingsdevices that can be transformative with regards to future healthcare development. However, there is an over saturation of wearable sensor review articles that essentially quote paper abstracts without critically assessing the works. Reported metrics in many cases cannot be taken at face value, with researchers overly fixated on large gauge factors. These facts hurt the usefulness of such articles and the very nature of the research area, unintentionally misleading those hoping to progress the field. Graphene and MXenes are arguably the most exciting organic and inorganic nanomaterials for polymer nanocomposite strain sensing applications respectively. Due to their combination of cost-efficient, scalable production and device performances, their potential commercial usage is very promising. Here, we explain the methods for colloidal nanosheets suspension creation and the mechanisms, metrics and models which govern the electromechanical properties of the polymer-based nanocomposites they form. Furthermore, the many fabrication procedures applied to make these nanosheet-based sensing devices are discussed. With the performances of 70 different nanocomposite systems from recent (post 2020) publications critically assessed. From the evaluation of these works using universal modelling, the prospects of the field are considered. Finally, we argue that the realisation of commercial nanocomposite devices may in fact have a negative effect on the global climate crisis if current research trends do not change.

Highly Flexible and Acid-Alkali Resistant TiN Nanomesh Transparent Electrodes for Next-Generation Optoelectronic Devices

Transparent electrodes are vital for optoelectronic devices, but their development has been constrained by the limitations of existing materials such as indium tin oxide (ITO) and newer alternatives. All face issues of robustness, flexibility, conductivity, and stability in harsh environments. Addressing this challenge, we developed a flexible, low-cost titanium nitride (TiN) nanomesh transparent electrode showcasing exceptional acid-alkali resistance. The TiN nanomesh electrode, created by depositing a TiN coating on a naturally cracked gel film substrate via a sputtering method, maintains a stable electrical performance through thousands of bending cycles. It exhibits outstanding chemical stability, resisting strong acid and alkali corrosion, which is a key hurdle for current electrodes when in contact with acidic/alkaline materials and solvents during device fabrication. This, coupled with superior light transmission and conductivity (88% at 550 nm with a sheet resistance of ∼200 Ω/sq), challenges the reliance on conventional materials. Our TiN nanomesh electrode, successfully applied in electric heaters and electrically controlled thermochromic devices, offers broad potential beyond harsh environment applications. It enables alternative possibilities for the design and fabrication of future optoelectronics for advancements in this pivotal field.

Graphene-like emerging 2D materials: recent progress, challenges and future outlook

Owing to the unique physical and chemical properties of 2D materials and the great success of graphene in various applications, the scientific community has been influenced to explore a new class of graphene-like 2D materials for next-generation technological applications. Consequently, many alternative layered and non-layered 2D materials, including h-BN, TMDs, and MXenes, have been synthesized recently for applications related to the 4th industrial revolution. In this review, recent progress in state-of-the-art research on 2D materials, including their synthesis routes, characterization and application-oriented properties, has been highlighted. The evolving applications of 2D materials in the areas of electronics, optoelectronics, spintronic devices, sensors, high-performance and transparent electrodes, energy conversion and storage, electromagnetic interference shielding, hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and nanocomposites are discussed. In particular, the state-of-the-art applications, challenges, and outlook of every class of 2D material are also presented as concluding remarks to guide this fast-progressing class of 2D materials beyond graphene for scientific research into next-generation materials.

Transparent Electronics for Wearable Electronics Application

Recent advancements in wearable electronics offer seamless integration with the human body for extracting various biophysical and biochemical information for real-time health monitoring, clinical diagnostics, and augmented reality. Enormous efforts have been dedicated to imparting stretchability/flexibility and softness to electronic devices through materials science and structural modifications that enable stable and comfortable integration of these devices with the curvilinear and soft human body. However, the optical properties of these devices are still in the early stages of consideration. By incorporating transparency, visual information from interfacing biological systems can be preserved and utilized for comprehensive clinical diagnosis with image analysis techniques. Additionally, transparency provides optical imperceptibility, alleviating reluctance to wear the device on exposed skin. This review discusses the recent advancement of transparent wearable electronics in a comprehensive way that includes materials, processing, devices, and applications. Materials for transparent wearable electronics are discussed regarding their characteristics, synthesis, and engineering strategies for property enhancements. We also examine bridging techniques for stable integration with the soft human body. Building blocks for wearable electronic systems, including sensors, energy devices, actuators, and displays, are discussed with their mechanisms and performances. Lastly, we summarize the potential applications and conclude with the remaining challenges and prospects.

Engineered kirigami design of PVDF-Pt core-shell nanofiber network for flexible transparent electrode

Nanofiber networks comprising polymer-metal core-shell structures exhibit several advantages, such as high uniformities and considerable flexibilities. Additionally, the flexibility of the nanofiber network may be further enhanced by engineering the network topology. Therefore, in this study, the topologies of polyvinylidene fluoride (PVDF)-Pt core-shell nanofiber (CS NF) networks were engineered, and their performances as flexible transparent electrodes were comprehensively evaluated. Three distinct topologies of nanofiber networks were induced using circular, square, and rectangular electrode collectors. A highly uniform nanofiber network was obtained using the square electrode collector, which generated a high density of nanofiber junctions (nodes). Consequently, this nanofiber network exhibited the smallest sheet resistance [Formula: see text] and lowest optical transmittance [Formula: see text] among the three CS NF networks. In contrast, nanofiber bundles were frequently formed in the randomly aligned CS NF network prepared using the circular electrode collector, reducing the node density. As a result, it simultaneously exhibited a very small [Formula: see text] and high [Formula: see text], generating the largest percolation figure of merit [Formula: see text]. Under certain strain directions, the CS NF network with the engineered topology exhibited a significantly enhanced mechanical durability. Finally, a flexible piezoelectric pressure sensor with CS NF network electrodes was fabricated and its sensing performance was excellent.

Soft and Stretchable Liquid Metal-Elastomer Composite for Wearable Electronics

Soft devices, especially capacitive stress (or strain) sensors, are important for applications, including wearable medical monitoring, electronic skin, and soft robotics. The incorporation of liquid metal particles (LMPs) into highly deformable elastomers as inclusions ameliorates the mechanical compliance caused by a rigid filler. The high dielectric constant and liquid feature of LMPs are suitable for soft sensors with high sensitivity and a large real-time dynamic detection range. Here, a class of LM-elastomer composites are introduced with elastic and high dielectric properties, making them uniquely suitable for the application of soft stress sensors. The prepared stretchable soft stress sensor can detect the bending degree of the finger, monitor physiological signals in real time, and distinguish the vibration from the pronunciation of different letters. The nanoscale X-ray computational tomography (nano-CT) measurements indeed detect the changes of LMPs under stress, i.e., LMPs in the matrix distribute from uneven to relatively uniform, agglomerate, and even connect each other to have a conduction path in the composition with high LMP contents, which cause the changes in the physical properties of devices under operation. The cognition of LMP changes in composites under stress is instructive for promoting their further applications in the field of soft devices.

Two-dimensional Ti3C2 MXene-based nanostructures for emerging optoelectronic applications

Since the first discovery of Ti₃C₂ in 2011, two-dimensional (2D) transition-metal carbides, carbonitrides and nitrides, known as MXenes, have attracted significant attention. Due to their outstanding electronic, optical, mechanical, and thermal properties, versatile structures and surface chemistries, Ti₃C₂ MXenes have emerged as new candidates with great potential for applications in optoelectronic devices, such as photovoltaics, photodetectors and photoelectrochemical devices. The excellent metallic conductivity, high anisotropic carrier mobility, good structural and chemical stabilities, high optical transmittance, excellent mechanical strength, tunable work functions, and wide range of optical absorption properties of Ti₃C₂ MXene nanostructures are the key to their success in a number of electronic and photonic device applications. Herein, we summarize the fundamental properties and preparation of pure Ti₃C₂ MXenes, functionalized Ti₃C₂ MXenes and their hybrid nanocomposites, as well as their optoelectronic applications. In the end, the perspective and current challenges of Ti₃C₂ MXenes toward the development of advanced MXene-based nanostructures are briefly discussed for future optoelectronic applications.

Copper Nanowires for Transparent Electrodes: Properties, Challenges and Applications

Transparent electrodes are essential elements of devices bearing a screen or display, as well as solar cells, LEDs etc. To overcome the drawbacks presented by indium tin oxide, nanomaterials have been proposed for a long time as alternatives. Metal nanowires are particularly interesting for their high intrinsic electrical conductivity. Copper nanowires have attracted wide interest due to the low cost and high abundancy of the starting material. However, they are easily oxidized thus suitable strategies must be devised to prevent it. This review discusses the fundamental properties and challenges of copper nanowires, focusing on the efforts made to make them longer and thinner then the strategies to prevent oxidation and to join them in the network are presented. After that, mechanical properties are summarized and applications are presented, before conclusions and perspectives are finally given.

Defect-Free Single-Layer Graphene by 10 s Microwave Solid Exfoliation and Its Application for Catalytic Water Splitting

Mass production of defect-free single-layer graphene flakes (SLGFs) by a cost-effective approach is still very challenging. Here, we report such single-layer graphene flakes (SLGFs) (>90%) prepared by a nondestructive, energy-efficient, and easy up-scalable physical approach. These high-quality graphene flakes are attributed to a novel 10 s microwave-modulated solid-state approach, which not only fast exfoliates graphite in air but also self-heals the surface of graphite to remove the impurities. The fabricated high-quality graphene films (∼200 nm) exhibit a sheet resistance of ∼280 Ω/sq without any chemical or physical post-treatment. Furthermore, graphene-incorporated Ni-Fe electrodes represent a remarkable ∼140 mA/cm² current for the catalytic water oxidation reaction compared with the pristine Ni-Fe electrode (∼10 mA/cm²) and a 120 mV cathodic shift in onset potential under identical experimental conditions, together with a faradic efficiency of >90% for an ideal ratio of H₂ and O₂ production from water. All these excellent performances are attributed to extremely high conductivity of the defect-free graphene flakes.

Preparation of graphene/PMMA composites with assistance of ultrasonic wave under supercritical CO2 conditions

The two-dimensional material graphene has many excellent physicochemical properties such as large specific surface area, high electron migration rate, good chemical properties, good thermal conductivity, high elastic modulus and mechanical strength that make it very valuable for theoretical research and application in the preparation of graphene/polymer composites. In this paper, the effects of ultrasonic intensity and reaction time on the molecular weight and yield of PMMA under supercritical CO₂ conditions were investigated. It was found that there are threshold and optimal values of ultrasonic intensity for initiating the reaction in supercritical CO₂ system. The threshold value is 150 W/cm² and the optimal ultrasonic intensity value is 225 W/cm². There is also an optimal value of ultrasonic initiation time for ultrasonic initiation polymerization. Combining the reaction yield and the molecular weight of the product, 2 h of ultrasonic initiation is a suitable initiation reaction time. Based on the synthesis of PMMA by ultrasonic excitation, the preparation of Graphene/PMMA composites by ultrasound assistance was also investigated. The TG and DTG characterization of PMMA and complex materials prepared by ultrasonic excitation showed that the radicals generated by ultrasonic excitation were uniformly distributed and did not generate unsaturated double bonded polymers. The electrical conductivity of the Graphene/PMMA composites prepared by ultrasonic excitation at a graphene content of 1 wt% increased to 1.13 × 10^-1 S/cm, which is better than that of the Graphene/PMMA prepared by in situ polymerization. This may be attributed to the ultrasound-assisted supercritical CO₂ fluid action that resulted in a more uniform distribution of Graphene mixed with PMMA in the prepared composites. Therefore, it is of important practical significance for the preparation of Graphene/PMMA composites by ultrasound-induced polymerization.

Controllable Liquid Exfoliation of Fibrous Phosphorus and Its Live-Cell Imaging

One-dimensional materials have been intensively studied because of their diverse properties, which are revealed when exfoliated from their bulk precursor. Liquid exfoliation is not only possibly the most suitable method for large-scale applications but also affords an opportunity to develop new deposition techniques. Fibrous phosphorus is a relatively new, one-dimensional material with high carrier mobility and a fast response velocity for future application in nanodevices. Because controllable liquid exfoliation processing of fibrous phosphorus (FP) remains challenging, we considered two factors: the exfoliated result and the removable solvents. We proposed a method for determining suitable solvents for efficient exfoliation and controllable size of fibrous phosphorus using Hansen solubility parameters. By controlling the water/acetone mixture ratios, the exfoliation effect could be controlled. Our work showed that 40% of the FP nanofibers were less than 10 nm in thickness and 70% of them were less than 20 nm. Furthermore, fibrous phosphorus produced a red fluorescence in bioimaging.

All-Solution-Processed Quantum Dot Electrical Double-Layer Transistors Enhanced by Surface Charges of Ti3C2Tx MXene Contacts

Fully solution-processed, large-area, electrical double-layer transistors (EDLTs) are presented by employing lead sulfide (PbS) colloidal quantum dots (CQDs) as active channels and Ti₃C₂T_x MXene as electrical contacts (including gate, source, and drain). The MXene contacts are successfully patterned by standard photolithography and plasma-etch techniques and integrated with CQD films. The large surface area of CQD film channels is effectively gated by ionic gel, resulting in high performance EDLT devices. A large electron saturation mobility of 3.32 cm² V^-1 s^-1 and current modulation of 1.87 × 10⁴ operating at low driving gate voltage range of 1.25 V with negligible hysteresis are achieved. The relatively low work function of Ti₃C₂T_x MXene (4.42 eV) compared to vacuum-evaporated noble metals such as Au and Pt makes them a suitable contact material for n-type transport in iodide-capped PbS CQD films with a LUMO level of ∼4.14 eV. Moreover, we demonstrate that the negative surface charges of MXene enhance the accumulation of cations at lower gate bias, achieving a threshold voltage as low as 0.36 V. The current results suggest a promising potential of MXene electrical contacts by exploiting their negative surface charges.

Dispersant-assisted liquid-phase exfoliation of 2D materials beyond graphene

The extensive research on liquid-phase exfoliation (LPE) performed in the last 10 years has enabled a low cost and mass scalable approach to the successful production of a range of solution-processed 2-dimensional (2D) materials suitable for many applications, from composites to energy storage and printed electronics. However, direct LPE requires the use of specific solvents, which are typically toxic and expensive. Dispersant-assisted LPE allows us to overcome this problem by enabling production of solution processed 2D materials in a wider range of solvents, including water. This approach is based on the inclusion of an additive, typically an amphiphilic molecule, designed to interact with both the nanosheet and the solvent, enabling exfoliation and stabilization at the same time. This method has been extensively used for the LPE of graphene and has been discussed in many reviews, whilst little attention has been given to dispersant-assisted LPE of 2D materials beyond graphene. Considering the increasing number of 2D materials and their potential in many applications, from nanomedicine to energy storage and catalysis, this review focuses on the dispersant-assisted LPE of transition metal dichalcogenides (TMDs), hexagonal boron nitride (h-BN) and less studied 2D materials. We first provide an introduction to the fundamentals of LPE and the type of dispersants that have been used for the production of graphene, we then discuss each class of 2D material, providing an overview on the concentration and properties of the nanosheets obtained. Finally, a perspective is given on some of the challenges that need to be addressed in this field of research.

Transparent and flexible high-power supercapacitors based on carbon nanotube fibre aerogels

In this work, we report the fabrication of continuous transparent and flexible supercapacitors by depositing a CNT network onto a polymer electrolyte membrane directly from an aerogel of ultra-long CNTs produced floating in the gas phase. The supercapacitors show a combination of a power density of 1370 kW kg-1 at high transmittance (ca. 70%), and high electrochemical stability during extended cycling (>94% capacitance retention over 20 000 cycles) and against repeated 180° flexural deformation. They represent a significant enhancement of 1-3 orders of magnitude compared to prior state-of-the-art transparent supercapacitors based on graphene, CNTs, and rGO. These features mainly arise from the exceptionally long length of CNTs, which makes the material behave as a bulk conductor instead of an aspect ratio-limited percolating network, even for electrodes with >90% transparency. The electrical and capacitive figures-of-merit for the transparent conductor are FoMe = 2.7, and FoMc = 0.46 F S-1 cm-2 respectively.

Advanced Nanomaterials, Printing Processes, and Applications for Flexible Hybrid Electronics

Recent advances in nanomaterial preparation and printing technologies provide unique opportunities to develop flexible hybrid electronics (FHE) for various healthcare applications. Unlike the costly, multi-step, and error-prone cleanroom-based nano-microfabrication, the printing of nanomaterials offers advantages, including cost-effectiveness, high-throughput, reliability, and scalability. Here, this review summarizes the most up-to-date nanomaterials, methods of nanomaterial printing, and system integrations to fabricate advanced FHE in wearable and implantable applications. Detailed strategies to enhance the resolution, uniformity, flexibility, and durability of nanomaterial printing are summarized. We discuss the sensitivity, functionality, and performance of recently reported printed electronics with application areas in wearable sensors, prosthetics, and health monitoring implantable systems. Collectively, the main contribution of this paper is in the summary of the essential requirements of material properties, mechanisms for printed sensors, and electronics.

Solution-processed two-dimensional materials for ultrafast fiber lasers (invited)

Since graphene was first reported as a saturable absorber to achieve ultrafast pulses in fiber lasers, many other two-dimensional (2D) materials, such as topological insulators, transition metal dichalcogenides, black phosphorus, and MXenes, have been widely investigated in fiber lasers due to their broadband operation, ultrafast recovery time, and controllable modulation depth. Recently, solution-processing methods for the fabrication of 2D materials have attracted considerable interest due to their advantages of low cost, easy fabrication, and scalability. Here, we review the various solution-processed methods for the preparation of different 2D materials. Then, the applications and performance of solution-processing-based 2D materials in fiber lasers are discussed. Finally, a perspective of the solution-processed methods and 2D material-based saturable absorbers are presented.

Modelling electrical conduction in nanostructure assemblies through complex networks

Carrier transport processes in assemblies of nanostructures rely on morphology-dependent and hierarchical conduction mechanisms, whose complexity cannot be captured by current modelling approaches. Here we apply the concept of complex networks to modelling carrier conduction in such systems. The approach permits assignment of arbitrary connectivity and connection strength between assembly constituents and is thus ideal for nanostructured films, composites and other geometries. Modelling of simplified rod-like nanostructures is consistent with analytical solutions, whereas results for more realistic nanostructure assemblies agree with experimental data and reveal conduction behaviour not captured by previous models. Fitting of ensemble measurements also allows the conduction properties of individual constituents to be extracted, which are subsequently used to guide the realization of transparent electrodes with improved performance. A global optimization process was employed to identify geometries and properties with high potential for transparent conductors. Our intuitive discretization approach, combined with a simple solver tool, allows researchers with little computational experience to carry out realistic simulations.

Review of fabrication methods of large-area transparent graphene electrodes for industry

Graphene is a two-dimensional material showing excellent properties for utilization in transparent electrodes; it has low sheet resistance, high optical transmission and is flexible. Whereas the most common transparent electrode material, tin-doped indium-oxide (ITO) is brittle, less transparent and expensive, which limit its compatibility in flexible electronics as well as in low-cost devices. Here we review two large-area fabrication methods for graphene based transparent electrodes for industry: liquid exfoliation and low-pressure chemical vapor deposition (CVD). We discuss the basic methodologies behind the technologies with an emphasis on optical and electrical properties of recent results. State-of-the-art methods for liquid exfoliation have as a figure of merit an electrical and optical conductivity ratio of 43.5, slightly over the minimum required for industry of 35, while CVD reaches as high as 419.

Exfoliation of 2D Materials for Energy and Environmental Applications

The fascinating properties of single-layer graphene isolated by mechanical exfoliation have inspired extensive research efforts toward two-dimensional (2D) materials. Layered compounds serve as precursors for atomically thin 2D materials (briefly, 2D nanomaterials) owing to their strong intraplane chemical bonding but weak interplane van der Waals interactions. There are newly emerging 2D materials beyond graphene, and it is becoming increasingly important to develop cost-effective, scalable methods for producing 2D nanomaterials with controlled microstructures and properties. The variety of developed synthetic techniques can be categorized into two classes: bottom-up and top-down approaches. Of top-down approaches, the exfoliation of bulk 2D materials into single or few layers is the most common. This review highlights chemical and physical exfoliation methods that allow for the production of 2D nanomaterials in large quantities. In addition, remarkable examples of utilizing exfoliated 2D nanomaterials in energy and environmental applications are introduced.

Multiscale Soft-Hard Interface Design for Flexible Hybrid Electronics

Emerging next-generation soft electronics will require versatile properties functioning under mechanical compliance, which will involve the use of different types of materials. As a result, control over material interfaces (particularly soft/hard interfaces) has become crucial and is now attracting intensive worldwide research efforts. A series of material and structural interface designs has been devised to improve interfacial adhesion, preventing failure of electromechanical properties under mechanical deformation. Herein, different soft/hard interface design strategies at multiple length scales in the context of flexible hybrid electronics are reviewed. The crucial role of soft ligands and/or polymers in controlling the morphologies of active nanomaterials and stabilizing them is discussed, with a focus on understanding the soft/hard interface at the atomic/molecular scale. Larger nanoscopic and microscopic levels are also discussed, to scrutinize viable intrinsic and extrinsic interfacial designs with the purpose of promoting adhesion, stretchability, and durability. Furthermore, the macroscopic device/human interface as it relates to real-world applications is analyzed. Finally, a perspective on the current challenges and future opportunities in the development of truly seamlessly integrated soft wearable electronic systems is presented.

Molecular insights into the dispersion stability of graphene oxide in mixed solvents: Theoretical simulations and experimental verification

HYPOTHESIS

Improving the dispersion stability of graphene oxide (GO) suspensions is of great importance in many potential applications of GO, such as GO-based laminated membranes used for separation, printable electronics, and aqueous liquid crystals.

EXPERIMENTS

Molecular dynamics (MD) simulations and quantum chemistry (QC) calculations along with complementary experiments were performed to study the dispersion stability of GO in the mixtures of water and polar organic solvents (dimethyl sulfoxide (DMSO), ethanol, and acetone).

FINDINGS

GO exhibits better dispersion stability in a solvent mixture than in pure water. The MD simulations uncover the underlying mechanism that mixed solvent layers are formed steadily on the surface of GO sheets and screen the interactions between them. QC calculations reveal that both DMSO and water form hydrogen bonds with the oxidized regions of GO. X-ray diffraction experiments confirm that the GO sheets are intercalated by DMSO and water molecules. Furthermore, the optimal ratio of the organic solvent to water is determined to achieve the best dispersion stability of GO through MD simulations. And such ratio is also verified by ultraviolet absorption spectral experiments. Thus, our findings provide a facile method to prepare GO suspensions with high dispersion stability.

Solution-based, flexible, and transparent patterned reduced graphene oxide electrodes for lab-on-chip applications

The fabrication of patterned reduced graphene oxide (rGO) thin films by dispersion of graphene oxide (GO) solution on different substrates is demonstrated. The GO films are deposited on substrates and patterned using plasma-enhanced liftoff techniques. The substrate is initially treated with oxygen plasma to increase surface energy and enhance wettability thus increasing the bond between the GO flakes and the substrate. The GO film is then deposited on the substrate from a GO aqueous solution via a spin coating approach. Photolithography is then used to pattern the GO film. Finally, the GO film is chemically reduced to rGO using hydroiodic acid. The fabrication method is found to be very compatible with polymer substrates. In addition, the developed patterned rGO electrodes are employed in manipulating living cells in a microfluidic device using dielectrophoresis.

Macrophage inflammatory and metabolic responses to graphene-based nanomaterials differing in size and functionalization

The preparation of graphene-based nanomaterials (GBNs) with appropriate stability and biocompatibility is crucial for their use in biomedical applications. In this work, three GBNs differing in size and/or functionalization have been synthetized and characterized, and their in vitro biological effects were compared. Pegylated graphene oxide (GO-PEG, 200-500 nm) and flavin mononucleotide-stabilized pristine graphene with two different sizes (PG-FMN, 200-400 nm and 100-200 nm) were administered to macrophages, chosen as cellular model due to their key role in the processing of foreign materials and the regulation of inflammatory responses. The results showed that cellular uptake of GBNs was mainly influenced by their lateral size, while the inflammatory potential depended also on the type of functionalization. PG-FMN nanomaterials (both sizes) triggered significantly higher nitric oxide (NO) release, together with some intracellular metabolic changes, similar to those induced by the prototypical inflammatory stimulus LPS. NMR metabolomics revealed that macrophages incubated with smaller PG-FMN displayed increased levels of succinate, itaconate, phosphocholine and phosphocreatine, together with decreased creatine content. The latter two variations were also detected in cells incubated with larger PG-FMN nanosheets. On the other hand, GO-PEG induced a decrease in the inflammatory metabolite succinate and a few other changes distinct from those seen in LPS-stimulated macrophages. Assessment of TNF-α secretion and macrophage surface markers (CD80 and CD206) further corroborated the low inflammatory potential of GO-PEG. Overall, these findings revealed distinct phenotypic and metabolic responses of macrophages to different GBNs, which inform on their immunomodulatory activity and may contribute to guide their therapeutic applications.

The effects of graphene and mesenchymal stem cells in cutaneous wound healing and their putative action mechanism

This study provides a review of the therapeutic potential of graphene dressing scaffolds and mesenchymal stem cells (MSCs) and their synergistic effects with respect to cutaneous wound healing. This study also considers their putative action mechanism based on the antibacterial, immunomodulating, angiogenic, matrix remodeling effects of materials belonging to the graphene family and MSCs during the wound healing process. In addition, this study discusses the cytocompatibility of graphene, its uses as a platform for skin substitutes, the properties it possesses with respect to providing protection against microbial invasion as well as strategies aimed at minimizing the chance of the occurrence of sepsis. MSCs are capable of secreting several factors that exert a therapeutic impact on reparative processes and tissue regeneration. In light of experiments conducted to date, graphene combined with MSCs appears to have the potential to enhance both the wound healing process and infection control at the injury site.

Conductive nanomaterials for 2D and 3D printed flexible electronics

This review describes recent developments in the field of conductive nanomaterials and their application in 2D and 3D printed flexible electronics, with particular emphasis on inks based on metal nanoparticles and nanowires, carbon nanotubes, and graphene sheets. We present the basic properties of these nanomaterials, their stabilization in dispersions, formulation of conductive inks and formation of conductive patterns on flexible substrates (polymers, paper, textile) by using various printing technologies and post-printing processes. Applications of conductive nanomaterials for fabrication of various 2D and 3D electronic devices are also briefly discussed.

A Protein-Based, Water-Insoluble, and Bendable Polymer with Ionic Conductivity: A Roadmap for Flexible and Green Electronics

Proteins present an ecofriendly alternative to many of the synthetic components currently used in electronics. They can therefore in combination with flexibility and electroactivity uncover a range of new opportunities in the field of flexible and green electronics. In this study, silk-based ionic conductors are turned into stable thin films by embedding them with 2D nanoclay platelets. More specifically, this material is utilized to develop a flexible and ecofriendly motion-sensitive touchscreen device. The display-like sensor can readily transmit light, is easy to recycle and can monitor the motion of almost any part of the human body. It also displays a significantly lower sheet resistance during bending and stretching regimes than the values typically reported for conventional metallic-based conductors, and remains fully operational after mechanical endurance testing. Moreover, it can operate at high frequencies in the kilohertz (kHz) range under both normal and bending modes. Notably, our new technology is available through a simple one-step manufacturing technique and can therefore easily be extended to large-scale fabrication of electronic devices.

Characterizing percolative materials by straining

Carrier transport in a wide range of nanomaterial assemblies proceeds by percolation through discontinuous networks of constituents. Improving percolative nanomaterials could enhance transparent conductors, sensors, and electronic devices. A significant obstacle in optimizing percolative materials is the challenge in their characterization. The critical connection pathways which determine a percolative material's conductivity are not easily accessible with existing metrology tools and traditional investigation approaches rely on indirect methods based on many samples and on simplifying assumptions. We here demonstrate the direct extraction of characteristic parameters from a single sample by analyzing the strain-dependent resistance of percolative materials. An analytical model is derived that can explain experimental data for various percolative materials, morphologies, and straining conditions. The relationship of the extracted parameters with previously introduced figures of merit allows us to compare nanostructures of diverse dimensionalities and compositions for applications such as strain gauges and transparent conductors.

Stretchable Ionics - A Promising Candidate for Upcoming Wearable Devices

As many devices for human utility aim for fast and convenient communication with users, superb electronic devices are demonstrated to serve as hardware for human-machine interfaces in wearable forms. Wearable devices for daily healthcare and self-diagnosis offer more human-like properties unconstrained by deformation. In this sense, stretchable ionics based on flexible and stretchable hydrogels are on the rise as another means to develop wearable devices for bioapplications for two main reasons: i) ionic currents and choosing the same signal carriers for biological areas, and ii) the adoption of hydrogel ionic conductors, which are intrinsically stretchable materials with biocompatibility. Here, the current status of stretchable ionics and future applications are introduced, whose positive effects can be magnified by stretchable ionics.

Salt and water co-assisted exfoliation of graphite in organic solvent for efficient and large scale production of high-quality graphene

Graphene has attracted enormous attention due to its unique physical properties and attractive applications in many fields. However, it is an ongoing challenge to develop a facile and low-cost method for the large scale preparation of high-quality graphene (HQGr). In this work, we have developed an improved liquid-phase exfoliation method to mass produce HQGr. This method is quite simple but efficient by exfoliation of graphite in organic solvent with the co-assistance of sodium citrate and water. Remarkably, the concentration of as-exfoliated HQGr was as high as 0.71 mg/mL under optimal conditions, while the oxygen content in HQGr was only 2.39%. After annealing at 500 °C for 2 h in argon atmosphere, the mean conductivity of annealed HQGr was as high as 1.4 × 10⁴ S m^-1. Therefore, this facile method for liquid-phase exfoliation of graphite has excellent potential in the industrial-scale production of HQGr for numerous applications in energy storage, optical and electronic fields.

Continuous Fabrication of Meter-Scale Single-Wall Carbon Nanotube Films and their Use in Flexible and Transparent Integrated Circuits

Single-wall carbon nanotubes (SWCNTs), especially in the form of large-area and high-quality thin films, are a promising material for use in flexible and transparent electronics. Here, a continuous synthesis, deposition, and transfer technique is reported for the fabrication of meter-scale SWCNT thin films, which have an excellent optoelectrical performance including a low sheet resistance of 65 Ω/◽ with a transmittance of 90% at a wavelength of 550 nm. Using these SWCNT thin films, high-performance all-CNT thin-film transistors and integrated circuits are demonstrated, including 101-stage ring oscillators. The results pave the way for the future development of large-scale, flexible, and transparent electronics based on CNT thin films.

Assisted Tip Sonication Approach for Graphene Synthesis in Aqueous Dispersion

Graphene (G) is a newcomer material that holds promising properties for many applications. The production of high quality G with a good yield is a long-standing goal for many researchers. This work emphasizes synthesis of dispersed graphene nanoplatelets (DGP) through aqueous dispersion technique in surfactant/water solution with the aid of tip sonication. A chemical method was also used to prepare graphene oxide (GO) and reduced graphene oxide (RGO) for comparison. Elemental analysis revealed the C:O ratio to be 12:1 for DGP but much lower for other graphene structures. Optical characterization of DGP, GO and RGO with UV and Raman spectroscopy confirmed the ideal structure of DGP. Moreover, X-ray diffraction (XRD) revealed the amorphous structure of DGP. Transmission electron microscope (TEM) imaging showed that DGP was composed of a few flat layers, unlike the wrinkled and partially bent multilayered G. Topological study of the DGP surface with scanning electron microscope (SEM) depicted its rough surface with (ra) value of 35 nm, as revealed using an atomic force microscope (AFM). Electrochemical measurements confirmed the higher conductivity of DGP over graphene prepared by chemical method due to lack of structural defects. Its perfect structure facilitates the mobility of charge carriers that makes it preferable in optoelectronic applications.

2D transition metal dichalcogenide nanosheets for photo/thermo-based tumor imaging and therapy

Two-dimensional (2D) graphene-like nanomaterials show wide applications in the fields of nanodevices, sensors, energy materials, catalysis, drug delivery, bioimaging, and tissue engineering. Recently, many studies have been focused on the synthesis and application of 2D transition metal dichalcogenide (TMD) nanosheets for various biomedical applications. In particular, 2D TMD nanosheets exhibit great advantages for tumor imaging and therapy compared to some traditional nanomaterials due to their high specific surface area, good biocompatibility, easy modification, and ultrahigh light and heat conversion efficiency. In this review, we summarize the recent advances in the synthesis, modification, and photo/thermo-based tumor imaging and therapy of 2D TMD nanosheets. The important studies on tumor bioimaging with TMD nanosheets, such as X-ray computed tomography, magnetic resonance imaging, and photoacoustic imaging, are demonstrated and discussed. In another section, the physical photothermal and photodynamic therapies as well as the pharmacological therapy of tumors with TMD nanosheet-based nanohybrids are introduced. It is expected that this work will be valuable for readers to understand the synthesis and modification of TMD nanosheets to design novel 2D functional nanomaterials for photo/thermo-based tumor imaging and therapy in one aspect, and in another aspect will extend the applications of TMD-based nanomaterials in materials science, analytical science, electrocatalysis, tissue engineering, and others.

Self-Assembled Graphene-Based Architectures and Their Applications

Due to unique planar structures and remarkable thermal, electronic, and mechanical properties, chemically modified graphenes (CMGs) such as graphene oxides, reduced graphene oxides, and the related derivatives are recognized as the attractive building blocks for "bottom-up" nanotechnology, while self-assembly of CMGs has emerged as one of the most promising approaches to construct advanced functional materials/systems based on graphene. By virtue of a variety of noncovalent forces like hydrogen bonding, van der Waals interaction, metal-to-ligand bonds, electrostatic attraction, hydrophobic-hydrophilic interactions, and π-π interactions, the CMGs bearing various functional groups are highly desirable for the assemblies with themselves and a variety of organic and/or inorganic species which can yield various hierarchical nanostructures and macroscopic composites endowed with unique structures, properties, and functions for widespread technological applications such as electronics, optoelectronics, electrocatalysis/photocatalysis, environment, and energy storage and conversion. In this review, significant recent advances concerning the self-assembly of CMGs are summarized, and the broad applications of self-assembled graphene-based materials as well as some future opportunities and challenges in this vibrant area are elucidated.

Highly Conductive and Transparent Reduced Graphene Oxide Nanoscale Films via Thermal Conversion of Polymer-Encapsulated Graphene Oxide Sheets

Despite noteworthy progress in the fabrication of large-area graphene sheetlike nanomaterials, the vapor-based processing still requires sophisticated equipment and a multistage handling of the material. An alternative approach to manufacturing functional graphene-based films includes the employment of graphene oxide (GO) micrometer-scale sheets as precursors. However, search for a scalable manufacturing technique for the production of high-quality GO nanoscale films with high uniformity and high electrical conductivity is still continuing. Here we show that conventional dip-coating technique can offer fabrication of high quality mono- and bilayered films made of GO sheets. The method is based on our recent discovery that encapsulating individual GO sheets in a nanometer thick molecular brush copolymer layer allows for the nearly perfect formation of the GO layers via dip coating from water. By thermal reduction the bilayers (cemented by a carbon-forming polymer linker) are converted into highly conductive and transparent reduced GO films with a high conductivity up to 10⁴ S/cm and optical transparency on the level of 90%. The value is the highest electrical conductivity reported for thermally reduced nanoscale GO films and is close to the conductivity of indium tin oxide currently in use for transparent electronic devices, thus making these layers intriguing candidates for replacement of ITO films.

Transparent, Flexible, and Conductive 2D Titanium Carbide (MXene) Films with High Volumetric Capacitance

2D transition-metal carbides and nitrides, known as MXenes, have displayed promising properties in numerous applications, such as energy storage, electromagnetic interference shielding, and catalysis. Titanium carbide MXene (Ti₃ C₂ T_x ), in particular, has shown significant energy-storage capability. However, previously, only micrometer-thick, nontransparent films were studied. Here, highly transparent and conductive Ti₃ C₂ T_x films and their application as transparent, solid-state supercapacitors are reported. Transparent films are fabricated via spin-casting of Ti₃ C₂ T_x nanosheet colloidal solutions, followed by vacuum annealing at 200 °C. Films with transmittance of 93% (≈4 nm) and 29% (≈88 nm) demonstrate DC conductivity of ≈5736 and ≈9880 S cm^-1 , respectively. Such highly transparent, conductive Ti₃ C₂ T_x films display impressive volumetric capacitance (676 F cm^-3 ) combined with fast response. Transparent solid-state, asymmetric supercapacitors (72% transmittance) based on Ti₃ C₂ T_x and single-walled carbon nanotube (SWCNT) films are also fabricated. These electrodes exhibit high capacitance (1.6 mF cm^-2 ) and energy density (0.05 µW h cm^-2 ), and long lifetime (no capacitance decay over 20 000 cycles), exceeding that of graphene or SWCNT-based transparent supercapacitor devices. Collectively, the Ti₃ C₂ T_x films are among the state-of-the-art for future transparent, conductive, capacitive electrodes, and translate into technologically viable devices for next-generation wearable, portable electronics.

Electrochemical Exfoliation of Graphite in Aqueous Sodium Halide Electrolytes toward Low Oxygen Content Graphene for Energy and Environmental Applications

Graphene and graphene-based materials have shown great promise in many technological applications, but their large-scale production and processing by simple and cost-effective means still constitute significant issues in the path of their widespread implementation. Here, we investigate a straightforward method for the preparation of a ready-to-use and low oxygen content graphene material that is based on electrochemical (anodic) delamination of graphite in aqueous medium with sodium halides as the electrolyte. Contrary to previous conflicting reports on the ability of halide anions to act as efficient exfoliating electrolytes in electrochemical graphene exfoliation, we show that proper choice of both graphite electrode (e.g., graphite foil) and sodium halide concentration readily leads to the generation of large quantities of single-/few-layer graphene nanosheets possessing a degree of oxidation (O/C ratio down to ∼0.06) lower than that typical of anodically exfoliated graphenes obtained with commonly used electrolytes. The halide anions are thought to play a role in mitigating the oxidation of the graphene lattice during exfoliation, which is also discussed and rationalized. The as-exfoliated graphene materials exhibited a three-dimensional morphology that was suitable for their practical use without the need to resort to any kind of postproduction processing. When tested as dye adsorbents, they outperformed many previously reported graphene-based materials (e.g., they adsorbed ∼920 mg g^-1 for methyl orange) and were useful sorbents for oils and nonpolar organic solvents. Supercapacitor cells assembled directly from the as-exfoliated products delivered energy and power density values (up to 15.3 Wh kg^-1 and 3220 W kg^-1, respectively) competitive with those of many other graphene-based devices but with the additional advantage of extreme simplicity of preparation.

Large-Scale Suspended Graphene Used as a Transparent Substrate for Infrared Spectroscopy

Due to weak interactions between micrometer-wavelength infrared (IR) light and nanosized samples, a high signal to noise ratio is a prerequisite in order to precisely characterize nanosized samples using IR spectroscopy. Traditional micrometer-thick window substrates, however, have considerable IR absorption which may introduce unavoidable deformations and interruptions to IR spectra of nanoscale samples. A promising alternative is the use of a suspended graphene substrate which has ultrahigh IR transmittance (>97.5%) as well as unique mechanical properties. Here, an effective method is presented for fabrication of suspended graphene over circular holes up to 150 µm in diameter to be utilized as a transparent substrate for IR spectroscopy. It is demonstrated that the suspended graphene has little impact on the measured IR spectra, an advantage which has led to the discovery of several missing vibrational modes of a 20 nm thick PEO film measured on a traditional CaF₂ substrate. This can provide a better understanding of molecules' fine structures and status of hanging bands. The unique optical properties of suspended graphene are determined to be superior to those of conventional IR window materials, giving this new substrate great potential as part of a new generation of IR transparent substrates, especially for use in examining nanoscale samples.

Flexibility and non-destructive conductivity measurements of Ag nanowire based transparent conductive films via terahertz time domain spectroscopy

Highly stable and flexible transparent electrodes are fabricated based on silver nanowires (AgNWs) on both polyethylene-terephthalate (PET) and polyimide (PI) substrates. Terahertz time domain spectroscopy (THz-TDS) was utilized to probe AgNW films while bended with a radius 5 mm to discover conductivity of bended films which was further analyzed through Drude-Smith model. AgNW films experience little degradation in conductivity (<3%) before, after, and during 1000 bending cycles. Highly stable AgNW flexible electrodes have broad applications in flexible optoelectronic and electronic devices. THz-TDS is an effective technique to investigate the electrical properties of the bended and flattened conducting films in a nondestructive manner.