Contact mechanics of a thin-walled capsule adhered onto a rigid planar substrate

Investigating Protein Structure Change in the Zona Pellucida with a Microrobotic System

In this paper we present a microrobotic system that integrates microscope vision and microforce feedback for characterizing biomembrane mechanical properties. We describe robust visual tracking of deformable biomembrane contours using physics-based models. A multi-axis microelectromechanical systems based force sensor is used to determine applied forces on biomembranes and to develop a novel biomembrane mechanical model. By visually extracting biomembrane deformations during loading, geometry changes can be used to estimate applied forces using a biomembrane mechanical model and the determined elastic modulus. Forces on a biomembrane can be visually observed and controlled, thus creating a framework for vision and force assimilated cell manipulation. The experimental results quantitatively describe a stiffness increase seen in the mouse zona pellucida (ZP) after fertilization. Understanding this stiffness increase, referred to as “zona hardening”, helps provide an understanding of ZP protein structure development, i.e., an increase in the number of cross links of protein ZP1 between ZP2 and ZP3 units that is conjectured to be responsible for zona hardening. Furthermore, the system, technique, and model presented in this paper can be applied to investigating mechanical properties of other biomembranes and other cell types, which has the potential to facilitate many biological studies, such as cell injury and recovery where biomembrane mechanical property changes need to be monitored.

Effects of neutral polymers on the mechanics of red blood cell adhesion onto coated glass surfaces

BACKGROUND

Cell-cell and cell-surface adhesion modulated by water-soluble polymers continues to be of current interest, especially since prior reports have indicated a role for depletion-mediated attractive forces.

OBJECTIVE

To determine the effects of concentration and molecular mass of the neutral polymer dextran (40 kDa to 28 MDa) on the adhesion of human red blood cells (RBC) to coated glass coverslips.

METHODS

Confocal-reflection interference contrast microscopy (C-IRM), in conjunction with phase contrast imaging, was utilized to measure the adhesion dynamics and contact mechanics of RBC during the initial stages of cell contact with several types of substrates.

RESULTS

Adhesion is markedly increased in the presence of dextran with a molecular mass ⩾ 70 kDa. This increased adhesiveness is attributed to reduced surface concentration of the large polymers and hence increased attractive forces due to depletion interaction. The equilibrium deformation of adhering RBC was modeled as a truncated sphere and the calculated adhesion energies were in close agreement with theoretical results.

CONCLUSIONS

These results clearly demonstrate that polymer depletion can promote RBC adhesion to artificial surfaces and suggest that this phenomenon may play a role in other specific and non-specific cell-cell interactions, such as rouleau formation and RBC-endothelial cell adhesion.

Cell membrane wrapping of a spherical thin elastic shell

Nanocapsules that can be tailored intelligently and specifically have drawn considerable attention in the fields of drug delivery and bioimaging. Here we conduct a theoretical study on cell uptake of a spherical nanocapsule which is modeled as a linear elastic solid thin shell in three dimensions. It is found that there exist five wrapping phases based on the stability of three wrapping states: no wrapping, partial wrapping and full wrapping. The wrapping phase diagrams are strongly dependent on the capsule size, adhesion energy, cell membrane tension, and bending rigidity ratio between the capsule and membrane. Discussion is made on similarities and differences between the cell uptake of solid nanocapsules and fluid vesicles. The reported results may have important implications for biomedical applications of nanotechnology.

Free and constrained inflation of a pre-stretched cylindrical membrane

This paper presents the free and constrained inflation of a pre-stretched hyperelastic cylindrical membrane and a subsequent constrained deflation. The membrane material is assumed as a homogeneous and isotropic Mooney–Rivlin solid. The constraining soft cylindrical substrate is assumed to be a distributed linear stiffness normal to the undeformed surface. Both frictionless and adhesive contact are modelled during the inflation as an interaction between the dry surfaces of the membrane and the substrate. An adhesive contact is modelled during deflation. The free and constrained inflation yields governing equations and boundary conditions, which are solved by a finite difference method in combination with a fictitious time integration method. Continuity in the principal stretches and stresses at the contact boundary is dependent on the contact conditions and inflation–deflation phase. The pre-stretch has a counterintuitive softening effect on free and constrained inflation. The variation of limit point pressures with pre-stretch and the occurrence of a cusp point is shown. Interesting trends are observed in the stretch and stress distributions after the interaction of the membrane with soft substrate, which underlines the effect of material parameters, pre-stretch and constraining properties.

Microcapsule mechanics: from stability to function

Microcapsules are reviewed with special emphasis on the relevance of controlled mechanical properties for functional aspects. At first, assembly strategies are presented that allow control over the decisive geometrical parameters, diameter and wall thickness, which both influence the capsule's mechanical performance. As one of the most powerful approaches the layer-by-layer technique is identified. Subsequently, ensemble and, in particular, single-capsule deformation techniques are discussed. The latter generally provide more in-depth information and cover the complete range of applicable forces from smaller than pN to N. In a theory chapter, we illustrate the physics of capsule deformation. The main focus is on thin shell theory, which provides a useful approximation for many deformation scenarios. Finally, we give an overview of applications and future perspectives where the specific design of mechanical properties turns microcapsules into (multi-)functional devices, enriching especially life sciences and material sciences.

Universal quantifier derived from AFM analysis links cellular mechanical properties and cell-surface integration forces with microbial deposition and transport behavior

In this study, we employed AFM analysis combined with mathematical modeling for quantifying cell-surface contact mechanics and magnitude and range of cell-surface interaction forces for seven bacterial strains with a wide range of cell morphology, dimension, and surface characteristics. Comprehensive cell-surface characterization including surface charge, extracellular polymeric substance content, hydrophobicity, and cell-cell aggregation analyses were performed. Flow-through column tests were employed to determine the attachment efficiency and deposition-transport behavior of these bacterial strains. No statistically significant correlation between attachment efficiency and any single-cell surface property was identified. Single-cell characterization by atomic force microscopy (AFM) yielded the mechanical deformation and elastic modulus, penetration resistance to AFM probe penetration by cellular surface substances (CSS), range and magnitude of the repulsive-attractive intersurface forces, and geometry of each strain. We proposed and derived a universal dimensionless modified Tabor's parameter to integrate all these properties that account for their collective behavior. Results showed that the Tabor parameter derived from AFM analysis correlated well with experimentally determined attachment efficiency (α), which therefore is able to link microscale cell-surface properties with macroscale bacterial transport behavior. Results suggested that the AFM tests performed between a single cell and a surface captured the key quantities of the interactions between the cell and the surface that dictate overall cell attachment behavior. Tabor's parameter therefore can be potentially incorporated into the microbial transport model.

A nanometre-scale resolution interference-based probe of interfacial phenomena between microscopic objects and surfaces

Interferometric techniques have proven useful to infer proximity and local surface profiles of microscopic objects near surfaces. But a critical trade-off emerges between accuracy and mathematical complexity when these methods are applied outside the vicinity of closest approach. Here we introduce a significant advancement that enables reflection interference contrast microscopy to provide nearly instantaneous reconstruction of an arbitrary convex object’s contour next to a bounding surface with nanometre resolution, making it possible to interrogate microparticle/surface interaction phenomena at radii of curvature 1,000 times smaller than those accessible by the conventional surface force apparatus. The unique view-from-below perspective of reflection interference contrast microscopy also reveals previously unseen deformations and allows the first direct observation of femtolitre-scale capillary condensation dynamics underneath micron-sized particles. Our implementation of reflection interference contrast microscopy provides a generally applicable nanometre-scale resolution tool that can be potentially exploited to dynamically probe ensembles of objects near surfaces so that statistical/probabilistic behaviour can be realistically captured.

Interferometric techniques can provide valuable contact and profile information of microscopic objects on surfaces. This work uses reflection interference contrast microscopy to directly observe contact phenomena and presents novel analytical methods offering high-accuracy nanoscale resolution.

Cellular pressure and volume regulation and implications for cell mechanics

In eukaryotic cells, small changes in cell volume can serve as important signals for cell proliferation, death, and migration. Volume and shape regulation also directly impacts the mechanics of cells and tissues. Here, we develop a mathematical model of cellular volume and pressure regulation, incorporating essential elements such as water permeation, mechanosensitive channels, active ion pumps, and active stresses in the cortex. The model can fully explain recent experimental data, and it predicts cellular volume and pressure for several models of cell cortical mechanics. Moreover, we show that when cells are subjected to an externally applied load, such as in an atomic force microscopy indentation experiment, active regulation of volume and pressure leads to a complex cellular response. Instead of the passive mechanics of the cortex, the observed cell stiffness depends on several factors working together. This provides a mathematical explanation of rate-dependent response of cells under force.

Large deformation and adhesive contact studies of axisymmetric membranes

A model membrane contact system consisting of an acrylic copolymer membrane and a PDMS substrate was utilized to evaluate a recently developed nonlinear large-deformation adhesive contact analysis. Direct measurements of the local membrane apex strain during noncontact inflation indicated that the neo-Hookean model provides an accurate measure of membrane strain and supports its use as the strain energy function for the analysis. Two membrane contact geometries, exhibiting significantly different strain distributions during withdrawal, were investigated. The first examines the wet contact of an air pressurized membrane. The second looks at the dry contact of a fluid deformed membrane in which a stepper motor controls membrane-substrate separation. A time-dependent modulus emerges from the analysis, with principal tensions obtained from a comparison of predicted and experimental membrane profiles. The applicability of this numerical analysis for determining membrane tension, however, is limited by wrinkling instabilities and viscoelasticity. For this reason, a conceptually simpler method, based on the direct measurement of the membrane tension and contact angle, was also utilized. The traditional peel energy defined with this direct measurement accurately described the membrane/substrate adhesive interactions, giving well-defined peel energies that were independent of the detailed strain state of the membrane.

Epigallocatechin-3-gallate induced modulation of cell deadhesion and migration on thermosensitive poly(N-isopropylacrylamide)

Epigallocatechin-3-gallate (EGCG), which is the main polyphenolic constituent of green tea, has emerged as a promising candidate for potential applications in selected anticancer therapeutics. Generally, tumor metastasis is known to be correlated with the alterations in cell adhesion and migration of normal cells. Nevertheless, the effect of EGCG on the biophysical responses of tumor cell adhering on extracellular matrix remains obscure. In this study, a thermosenstive poly(N-isopropylacrylamide) (PIPAAm) system was developed to elucidate the potential anti-tumor effect of EGCG on the deadhesion and migration of HepG2 cells. First, both XPS and ELISA validated the coating of laminin (LA) on PIPAAm. Second, a change of nanotopology of LA layer on PIPAAm across the lower solution critical temperature (LCST) was detected with AFM. HepG2 cells seeded on LA-coated PIPAAm surface was shown to go through deadhesion by lowering the temperature below the LCST. Interestingly, EGCG was shown to decelerate the thermally triggered deadhesion of HepG2 cell on LA coated PIPAAm. Moreover, the inhibition of cell deadhesion in EGCG treated cells was shown to be driven by actin remodeling. Interestingly, the modulation of cell deadhesion on LA coated PIPAAm by EGCG leads to the reduction of cell motility as shown by real-time cell migration assay. Overall, the use of PIPAAm system demonstrated the promise of EGCG as anticancer therapy through the suppression of cell deadhesion and migration.

Modulating cell adhesion dynamics on carbon nanotube monolayer engineered with extracellular matrix proteins

Although it has been demonstrated that carbon nanotubes (CNTs) may have potentials for tissue engineering applications because of their unparalleled physical properties, little has been known on the cell adhesion mechanisms on model CNT monolayer pertaining to the design of novel cell therapeutics device. In this study, the adhesion dynamics of primary porcine esophageal fibroblasts (PEFs) on CNT monolayer were elucidated with confocal reflectance interference contrast microscopy (C-RICM) integrating with phase contrast microscopy. Moreover, CNT monolayer (CNT-ML) was functionalized with two typical extracellular matrix (ECM) proteins including collagen type I (COL) and fibronectin (FN) in order to promote its biocompatibility. First, it is shown by atomic force microscopy that the topographical features of CNT-ML were dependent on the types of immobilized ECM protein. Second, significant time lag in adhesion contact evolution (around 10 min) for PEFs was found on both CNT-ML and CNT-COL compared to the negligible time lag on CNT-FN. It was found that adhesion energy of PEFs on the CNT-COL and CNT-FN surfaces reached steady state at 60 and 30 min after cell seeding compared to 70 min on CNT-ML surface. At steady state, the adhesion energy of PEFs on the CNT-COL and CNT-FN surfaces was about twice as much than that on the CNT-ML surface. Moreover, immobilization of collagen or fibronectin on CNT monolayer led to an increase in seeding efficiency and proliferation rate of PEFs. Scanning electron microscopy and immunostaining together demonstrated that PEFs displayed an elongated morphology and highly polarized actin network on both CNT-COL and CNT-FN surfaces, whereas PEFs displayed nonuniform cell morphology and actin organization on the CNT-ML surface. Overall, our results demonstrated that the biophysical responses and biological behavior of PEFs on unmodified or functionalized CNT monolayer were different. Functionalization of CNT through extracellular matrix protein immobilization effectively promotes cell adhesion and proliferation, which may provide information for designing CNT-based biomaterials or novel cell therapeutics devices in biomedical engineering.

Hepatitis B virus induced coupling of deadhesion and migration of HepG2 cells on thermo-responsive polymer

The unique physical property of thermo-responsive polymer (TRP) has recently prompted its increasing applications in tissue engineering. On the other hand, TRP has not been exploited for potential applications in quantitative cell screening against external stimulations. In this study, TRP is applied as a model system for elucidating the effect of HBV replication on the biophysical responses of HepG2 cells transfected by wild type HBV genome. Moreover, mutant HBV genome is designed to assess the specific activity of the SH3-binding domain of HBx during HBV replication. The adhesion contact recession and geometry transformation of HepG2 cells transfected with empty vector (pcDNA3.1 cells), wild type HBV (wtHBV cells) and mutant HBV genome (mHBV cells) are probed during the thermal transformation across lower solution critical temperature of TRP. In comparison with pcDNA3.1 cells and mHBV cells, the initial rate of reduction in degree of deformation and average adhesion energy for wtHBV cells is significantly increased. Interestingly, migration speed and persistence time of cells are found to be correlated with the cell deadhesion kinetics. Immuno-fluorescence microscopy demonstrates that HBV replication reduces the actin concentration and focal adhesions at cell periphery during the initial 30 min cell deadhesion. The results strongly suggested that HBV infection triggers the dynamic responses of HepG2 cells through the cytoskeleton remodeling and subsequent mechanochemical transduction. Overall, it is shown that TRP provides a convenient platform for quantifying biological stimulations on adherent cells.

Effect of cytoskeleton inhibitors on deadhesion kinetics of HepG2 cells on biomimetic surface

Cytochalasin-D (Cyto-D) and latrunculin-A (Lat-A) are known inhibitors of actin microfilaments and adversely affect the physiological functions of anchorage-dependent cells. Alternatively, doxorubicin (Dox), a chemotherapeutic drug is known to induce apoptosis and cell detachment of tumor cells. However, the intricate interplay between drug administration, cytoskeletal rearrangement and biophysical responses of live cells on immobilized layer of extracellular matrix (ECM) protein remains unknown. In this study, the deadhesion kinetics and actin remodeling of live HepG2 cells following the addition of the three drugs are probed with confocal reflectance interference contrast microscopy (C-RICM) and fluorescence confocal microscopy. First, it is shown that the reduction in two-dimensional spread area of HepG2 cells is 10.5%, 15.4% and 21.9% under the influence of 5 microM of Lat-A, Cyto-D and Dox, respectively. Secondly, C-RICM demonstrates the recession of strong adhesion contact against time of cell seeding upon the addition of the three drugs. Thirdly, the initial cell detachment rate and extent of reduction in the degree of cell deformation (a/R) are dependent on both the drug types and concentration. Lastly, oscillation-like responses of a/R and adhesion energy are uniquely found in Lat-A induced cell detachment. Overall, our biophysical approaches have been proven as a highly quantitative platform for elucidating the interfacial properties of adherent cells on biomimetic surfaces under cytoskeleton disruption.

Quantification of nano-scale intermembrane contact areas by using fluorescence resonance energy transfer

Nanometer-scale intermembrane contact areas (CAs) formed between single small unilamellar lipid vesicles (SUVs) and planar supported lipid bilayers are quantified by measuring fluorescence resonance energy transfer (FRET) between a homogenous layer of donor fluorophores labeling the supported bilayer and acceptor fluorophores labeling the SUVs. The smallest CAs detected in our setup between biotinylated SUVs and dense monolayers of streptavidin were approximately 20 nm in radius. Deformation of SUVs is revealed by comparing the quenching of the donors to calculations of FRET between a perfectly spherical shell and a flat surface containing complementary fluorophores. These results confirmed the theoretical prediction that the degree of deformation scales with the SUV diameter. The size of the CA can be controlled experimentally by conjugating polyethylene glycol polymers to the SUV or the surface and thereby modulating the interfacial energy of adhesion. In this manner, we could achieve secure immobilization of SUVs under conditions of minimal deformation. Finally, we demonstrate that kinetic measurements of CA, at constant adhesion, can be used to record in real-time quantitative changes in the bilayer tension of a nano-scale lipid membrane system.

A simplified formulation of adhesion problems with elastic plates

The solution of adhesion problems with elastic plates generally involves solving a boundary-value problem with an assumed contact area. The contact region is then found by minimizing the total potential energy with respect to the contact area (i.e. the contact radius for the axisymmetric case). Such a procedure can be extremely long and tedious. Here, we show that the inclusion of adhesion is equivalent to specifying a discontinuous internal bending moment at the contact region boundary. The magnitude of this moment discontinuity is related to the work of adhesion and flexural rigidity of the plate. Such a formulation can greatly reduce the algebraic complexity of solving these problems. It is noted that the related plate contact problems without adhesion can also be solved by minimizing the total potential energy. However, it has long been recognized that it is mathematically more efficient to find the contact area by specifying a continuous internal bending moment at the boundary of the contact region. Thus, our moment discontinuity method can be considered to be a generalization of that procedure which is applicable for problems with adhesion.

Engineering cell de-adhesion dynamics on thermoresponsive poly(N-isopropylacrylamide)

Poly(N-isopropylacrylamide) (PIPAAm) has been demonstrated as an effective thermoresponsive polymer for non-invasive cell regeneration/recovery. However, little is known about the intricate relationship between the biophysical response of cells and physiochemical properties of PIPAAm during cell recovery. In this study, the de-adhesion kinetics of smooth muscle cell (SMC) on PIPAAm surfaces is probed with unique biophysical techniques. Water-immersion atomic force microscope (AFM) first showed that the nanotopology of PIPAAm surfaces is dependent on the polymerization time and collagen coating. It is found that the initial rate of cell de-adhesion increases with the increase in polymerization time. Moreover, the degree of cell deformation (a/R) and average adhesion energy are reduced with the increase of grafted PIPAAm density during 40min of cell de-adhesion. It has been shown that collagen coating regulates cell adhesion on biomaterial surface. Interestingly, lower collagen density on PIPAAm leads to higher adhesion energy per cell during the initial 20min compared with as-prepared PIPAAm, while the initial rate of cell de-adhesion remains unchanged. In contrast, higher collagen density leads to 50% reduction in the initial rate of cell de-adhesion and higher adhesion energy per cell during the entire 90min. Furthermore, immunostaining of actin provides supporting evidence that the de-adhesion kinetics is correlated with the cytoskeleton transformation during cell de-adhesion below the lower solution critical temperature (LCST).

Dual requirements of extracellular matrix protein and chitosan for inducing adhesion contact evolution of esophageal epithelia

It has been recently shown that chitosan (CHI)/collagen prostheses induced epithelization at the esophagus site of animal model. However, little is known on the biophysical mechanisms of cell adhesion on CHI-based material pertaining to esophagus tissue engineering. In this study, the adhesion contact dynamics of porcine esophageal epithelial cells seeded on CHI surface is probed using confocal-reflectance interference contrast microscopy in conjunction with phase-contrast microscopy. First of all, cells fail to form any adhesion contact on either CHI or elastin (ES)-coated surface. On CHI coated with fibronectin (CHI-FN) or elastin (CHI-ES), strong adhesion contact of cells evolved over time until they reached a steady-state level. The initial cell deformation rates of cells on CHI-FN and CHI-ES are 0.0138 and 0.0151 min(-1), respectively. Interestingly, cells on fibronectin (FN) coated substrate transiently form strong adhesion contact and eventually undergo deadhesion. Moreover, the steady-state adhesion energy of epithelial cells on CHI-FN is 1.73 and 148 times larger than that on CHI-ES and FN, respectively. The actin of cells on CHI-FN transforms from microfilament meshes at cell periphery to stress fibers throughout the cytoplasm during cell seeding. At the same time, vinculin staining demonstrated the evolution of focal adhesion complexes in cells on CHI-FN after 130 min of seeding. Interestingly, CHI-ES induces the formation of focal adhesion complexes in a lesser extent in cell but fails to lead to stress fiber formation. Overall, our study reveals that long-term adhesion contact evolution of esophageal epithelia is only triggered by both extracellular matrix protein and chitosan.

Dynamics of smooth muscle cell deadhesion from thermosensitive hydroxybutyl chitosan

Thermoresponsive polymer (TRP) enables the enzyme-free harvesting of cells through an acute increase in surface hydrophilicity of TRP across its lower critical solution temperature (LCST), rendering feasible the generation of polymer-free cell sheets for regenerative medicine applications. To date, the intricate mechanisms of cell deadhesion/detachment on TRP surface remain obscure. Elucidation of such biophysical responses would be valuable for the cell sheet technology. In this study, integrative biophysical techniques are applied to probe the thermal-induced deadhesion kinetics of smooth muscle cell (SMC) on thermoresponsive hydroxybutyl chitosan (HBC29) against different periods of pre-culture time at 37 degrees C. Atomic force microscopy demonstrates that both the surface topography and mechanical property of HBC29 film in water are acutely modulated across its LCST. Firstly, cells show negligible changes in adhesion contact area during low-temperature incubation on unmodified tissue culture polystyrene (TCPS). Secondly, the recession of adhesion contact and retraction of cell body for cells with different pre-culture times are triggered by HBC29 coating on TCPS. Interestingly, the initial rate of reduction in the normalized adhesion contact area of SMC is negatively correlated with the pre-culture time. Thirdly, the degree of cell deformation and average adhesion energy are reducing functions of time only for SMCs with the lowest pre-culture time. In contrast, adhesion energy per cell is a reducing function of time irrespective of the change of pre-culture time. Lastly, the temporal dynamics of cytoskeleton organization and beta-actin/smoothelin-B mRNA expression for SMCs is strongly dependent on the pre-culture time. Overall, this study demonstrates that the thermal-induced deadhesion of SMC on TRP is characterized by the evolution of its contractile phenotypes.

Novel biophysical techniques for investigating long-term cell adhesion dynamics on biomaterial surfaces

Cell adhesion on biomaterial surface is crucial for the regeneration and function of clinically viable cell and tissues. In turn, the cellular phenotypes, following the mechanochemical transduction of adherent cells on biomaterials, are directly correlated to the biophysical responses of cells. However, the lack of an integrated bio-analytical system for probing the cell-substrate interface poses significant obstacles to understanding the behavior of cells on biomaterial surface. We have developed a novel method, based on the principle of confocal reflectance interference contrast microscopy (C-RICM) that has enabled us to study the biomechanical deformation of cells on biomaterial surfaces. In this article, we would like to describe our recent development of the C-RICM system that integrates a confocal fluorescence microscope, phase contrast microscope and GFP expression system. We shall demonstrate the system by determining the adhesion contact kinetics, initial deformation rate, cytoskeleton structures of adherent cells on extracellular matrices (e.g., collagen and fibronectin) and biodegradable polymer (e.g., poly(lactic acid)) during long-term culture. We shall demonstrate that this unique approach could provide valuable biophysical information necessary for designing optimized biomaterial surfaces for cell/tissue regeneration applications.

Adhesion contact kinetics of HepG2 cells during Hepatitis B virus replication: Involvement of SH3-binding motif in HBX

It has been shown that Hepatitis B virus (HBV) replication directly alters the expression of key cytoskeleton-associated proteins which play key roles in mechanochemical signal transduction. Nevertheless, little is known on the correlation between HBV replication and the subsequent adhesion mechanism of HBV-replicating cells. In this study, it is demonstrated that the lag time of adhesion contact evolution of HepG2 cells with HBV replication is significantly increased by two times compared to that of normal HepG2 cell on collagen coated substrate. During the initial 20 min of cell seeding, only diffuse forms of vinculin was detected in HBV replicating cells while vinculin-associated focal complexes were found in normal and control cells. Similar delay in cell adhesion in HBV-replicating cells was observed in cells transfected with HBX, the smallest HBV protein, suggesting its involvement in this cellular process. In addition, a proline rich region found in many SH3 binding proteins was identified in HBX. HBX was found to interact with the focal adhesion protein, vinexin-beta, through the SH3 binding. Furthermore, HepG2 cells with HBV replication showed evidence of cell rounding up, possibly resulting from cytoskeletal reorganizations associated with interaction between HBX and vinexin-beta. Taken together, our results suggest that HBX is involved in the cytoskeletal reorganization in response to HBV replication.

Adhesion contact dynamics of 3T3 fibroblasts on poly (lactide-co-glycolide acid) surface modified by photochemical immobilization of biomacromolecules

A simple and effective method of biomacromolecule immobilization on biomaterial surface for direct tuning of biophysical parameters such as the initial cell deformation rate, degree of cell spreading and adhesion kinetics is important for tissue engineering. The photochemical immobilization of azide-chitosan (Az-CS) on poly (lactide-co-glycolide) acid (PLGA) is applied here. Chitosan immobilization on PLGA through the photoactive azide group further facilitates subsequent grafting of other biocompatible biomacromolecules like gelatin (Gel) through the active amine groups on CS. This study quantitatively compares the 3T3 fibroblast adhesion dynamics on three PLGA surfaces (Gel-CS-PLGA, CS-PLGA and unmodified PLGA surfaces) using Confocal-Reflectance Interference Contrast Microscopy (C-RICM) together with phase contrast imaging. CS-PLGA and Gel-CS-PLGA surfaces developed were confirmed by X-ray photoelectron spectroscopy, atomic force microscopy and water contact angle and cell adhesion contact dynamics measurements. The cell adhesion was strongest on the Gel-CS-PLGA surface and lowest on unmodified PLGA. The steady state adhesion energy attained by the cells on gelatin modified PLGA surface is determined as 4.0 x 10(-8) J/m(2), which is about 400 times higher than that on PLGA surface (1.1 x 10(-10) J/m(2)). Significantly increased cell adhesion with Gel-CS-PLGA is postulated to result in increased cell spreading. Our integrated biophysical method can quantify the transient contact dynamics and is sufficiently accurate to discriminate even between Gel and CS modified surfaces.

Adhesion Contact Dynamics of Fibroblasts on Biomacromolecular Surfaces

Biomacromolecules like gelatin and chitosan have emerged as highly versatile biomimetic coatings for applications in tissue engineering. The elucidation of the interfacial kinetics of cell adhesion on biomacromolecular surfaces will pave the way for the rational design of chitosan/gelatin-based systems for cell regeneration. Biomacromolecular ultra-thin films, chemically immobilized on fused silica are ideal experimental models for determining the effect of surface properties on the biophysical cascades following cell seeding. In this study, confocal reflectance interference contrast microscopy (C-RICM), in conjunction with phase contrast microscopy and fluorescence confocal microscopy, was applied to detect the adhesion contact dynamics of 3T3 fibroblasts on chitosan and gelatin ultrathin films. X-ray photoelectron spectroscopy (XPS) confirmed the immobilization of chitosan or gelatin on the silanized glass surface. Both the initial cell deformation rate and the change of two-dimensional spread area of the 3T3 fibroblasts are higher on gelatin-modified surfaces than on chitosan surfaces. The steady-state adhesion energy of 3T3 fibroblasts on gelatin film is three times higher than that on chitosan film. Immuno-staining of actin further demonstrates the different organization of cytoskeleton, likely induced by the change in cell signaling mechanism on the two biomacromolecular surfaces. The better attachment of 3T3 fibroblast to gelatin is postulated to be caused by the presence of adhesive domains on gelatin.

pH responsive adhesion of phospholipid vesicle on poly(acrylic acid) cushion grafted to poly(ethylene terephthalate) surface

Polymer-supported lipid bilayer is a key enabling technology for the design and fabrication of novel biomimetic devices. To date, the physical driving force underlying the formation of polymer-supported lipid bilayer remains to be determined. In this study, the interaction between dipalmitoylphosphocholine (DPPC) vesicle and poly(ethylene terephthalate) [PET] surface with or without grafted poly(acrylic acid) [PAA] layer is examined with several biophysical techniques. First, vesicle deformation analysis shows that the geometry of adherent vesicle on either plain PET or PAA-grafted PET surface is best described by a truncated sphere model. At neutral pH, the degree of deformation and adhesion energy are unaltered by the grafted polymerization of acrylic acid on PET surface. Interestingly, the average magnitude of adhesion energy is increased by 185% and -43% on PAA-grated PET and plain PET surface, respectively, towards an increase of pH at room temperature. Our results demonstrate the possibility of tuning the adhesive interaction between vesicle and polymer cushion through the control of polyelectrolyte ionization on the solid support.

Adhesion contact dynamics of primary hepatocytes on poly(ethylene terephthalate) surface

The design of bioartificial liver assist device requires an effective attachment of primary hepatocytes on polymeric biomaterials. A better understanding of this cell-surface interaction would aid the optimal choice of biomaterials. In this study, the adhesion contact dynamics of primary hepatocytes on poly(ethylene terephthalate) (PET) surface with grafted poly(acrylic acid) (PAA) and coated collagen is probed with confocal reflectance interference contrast microscopy (C-RICM) in conjunction with phase contrast microscopy. An increase of acrylic acid density from 0 to 12 nmole/cm2 raises both the root-mean-square surface roughness and amount of adsorbed collagen of PET surface. C-RICM demonstrates that hepatocytes form tight adhesion contacts upon seeding on both plain PET and PAA-grafted PET (both with collagen coating) despite the insignificant two-dimensional cell spreading. At two hours after cell seeding, the normalized contact area and adhesion energy of hepatocytes on 12 nmole/cm2 PAA-grafted-PET (with collagen coating) is 27% and 114% higher, respectively, than that on collagen coated plain PET. Interestingly, the growth kinetics of adhesion patch for hepatocyte on PAA-grafted PET with collagen coating is best fitted by R proportional to t0.5 and is significantly different from that on collagen coated plain PET, which is best fitted by R proportional to t0.25. Overall, this study demonstrates the modulation of biophysical response of adherent hepatocytes through the control of the biomaterial surface properties.

Mechanical property characterization of mouse zona pellucida

Previous intracytoplasmic sperm injection (ICSI) studies have indicated significant variation in ICSI success rates among different species. In mouse ICSI, the zona pellucida (ZP) undergoes a "hardening" process at fertilization in order to prevent subsequent sperm from penetrating. There have been few studies investigating changes in the mechanical properties of mouse ZP post fertilization. To characterize mouse ZP mechanical properties and quantitate the mechanical property differences of the ZP before and after fertilization, a microelectromechanical systems-based multiaxis cellular force sensor has been developed. A microrobotic cell manipulation system employing the multiaxis cellular force sensor is used to conduct mouse ZP force sensing, establishing a quantitative relationship between applied forces and biomembrane structural deformations on both mouse oocytes and embryos. An analytical biomembrane elastic model is constructed to describe biomembrane mechanical properties. The characterized elastic modulus of embryos is 2.3 times that of oocytes, and the measured forces for puncturing embryo ZP are 1.7 times those for oocyte ZP. The technique and model presented in this paper can be applied to investigations into the mechanical properties of other biomembranes, such as the plasma membrane of oocytes or other cell types.

Effect of acyl chain mismatch on the contact mechanics of two-component phospholipid vesicle during main phase transition

It has been recently demonstrated that acyl chain mismatch of phospholipid bilayer composed of a binary lipid mixture induces component formation on the lateral plane of the bilayer [Biophys. J. 83 (2002) 1820-1883]. In this report, the contact mechanics of unilamellar vesicles composed of binary dimyristoyl-phosphatidylcholine (DMPC)/dipalmitoyl-phosphocholine (DPPC) mixtures on fused silica and amino-modified substrates is simultaneously probed by confocal-reflectance interference contrast microscopy (C-RICM) and cross-polarized light microscopy during gel to liquid crystalline transition of the lipid bilayer. C-RICM results indicate that the average degree of vesicle deformation for DMPC-rich and DPPC-rich vesicles adhering on fused silica substrate is increased by 30% and 14%, respectively, in comparison with that in pure DMPC and DPPC vesicles. Also, lateral heterogeneity induced by acyl chain mismatch increases the average magnitude of adhesion energy in DMPC-rich and DPPC-rich vesicles of all sizes by 6.4 times and 2.3 times, respectively. Similar modulation of adhesion mechanics induced by carbon chain difference is obtained on amino-modified substrate. Most importantly, the thermotropic transition of the mixed bilayer from gel (below T(m)) to fluid phase (above T(m)) further exemplifies the effect of acyl chain mismatch on the increases of degree of vesicle deformation and adhesion energy.

Thermal induced modification of the contact mechanics of adhering liposomes on cationic substrate

The correlation between the mechanical property and the thermotropic transition of the phospholipid bilayer has been recently demonstrated (Chem. Phys. Lipids 110 (2001) 27). However, the role of thermal induced mechanical responses of phospholipid bilayer on the contact mechanics of liposome adhering on a cationic substrate has not been determined. In this study, confocal-reflectance interference contrast microscopy, phase contrast microscopy and contact mechanics modeling are applied to probe the adhesion mechanisms of liposomes in the presence of electrostatic interactions during the thermotropic transition of the lipid bilayer. When temperature increases from 23 to 49 degrees C at pH 7.4, the degree of liposome deformation (a/R) and adhesion energy of dipalmitoyl-sn-glycero-3-phosphocholine liposome increases by 10% and remains constant, respectively, on 3-amino-propyl-triethoxy-silane (APTES) modified substrate. The extents of increase in these two parameters are highly dependent on the physicochemical properties of the rigid substrate. At pH 4, the adhesion energies above and below the phase transition temperature (T(m)) are increased by one order of magnitude due to the formation of the free silanol groups on APTES substrate. In hypotonic condition, the degree of vesicle deformation remains constant and the adhesion energy reduces by 20% during sample heating. Under all conditions, the adhesion energy of the adhering liposome spans a few orders of magnitude against the increase of liposome size as the surface area to volume ratio is maximized in smallest vesicle.

Substrate-induced deformation and adhesion of phospholipid vesicles at the main phase transition

The physiochemical properties of phospholipid vesicle, e.g. permeability, elasticity, etc., are directly modulated by the chain-melting transition of the lipid bilayer. Currently, there is a lack of understanding in the relationship between thermotropic transition, mechanical deformation and adhesion strength for an adherent vesicle at temperature close to main phase transition temperature T(m). In this study, the contact mechanics of dimyristoyl-phosphatidylcholine (DMPC) vesicle at the main phase transition are probed by confocal reflectance interference contrast microscopy in combination with phase contrast microscopy. It is shown that DMPC vesicles strongly adhere on pure fused silica substrate at T(m) and the degree of deformation as well as the adhesion energy is a decreasing function against the mid-plane diameter of the vesicles. Furthermore, an increase of osmotic pressure at the gel/liquid crystalline phase co-existence imposes insignificant changes in both the degree of deformation and adhesion energy of adherent vesicles when the lipid bilayer permeability is maximized. With the reverse of substrate charge, the mechanical deformation and adhesion strength for larger vesicles (mid-plane diameter >18 microm) are significantly reduced. By monitoring the parametric response of substrate-induced vesicle adhesion during main phase transition, it is shown that the degree of deformation and adhesion energy of adhering vesicle is increased and unchanged, respectively, against the increase of temperature.

Capsule-substrate contact deformation: determination of adhesion energy

A study is reported of a cellular entity (liquid-filled microcapsule) adhered on a flat glass substrate in response to changes in osmotic pressure and temperature. High-resolution reflection interference contrast microscopy (HR-RICM) and phase-contrast microscopy were developed for probing the adhesion contact area, capsule-substrate separation profile and adhesion energy of the adhering microcapsule. The new technique increased the detection limit of the measured capsule wall-substrate separation in the cohesive zone from 1 to 4.5 microm and improved the spatial resolution of the heterogeneous contact zones. A theoretical model was applied to correlate quantitatively the adhesion energy to the area of the contact zone. The work demonstrated the possibility of ascertaining the quantitative interfacial adhesion energy of a liquid-filled microcapsule using the present technique and represents the first step in extending this novel approach to study more complicated systems, such as cell-substrate interactions, in the future.