Advances in the separation, sensitive detection, and characterization of heparin and heparan sulfate

Characterization of maltose-binding protein-fused heparinases with enhanced thermostability by application of rigid and flexible linkers

Heparinases, including heparinases I-III (HepI, HepII, and HepIII, respectively), are important tools for producing low-molecular-weight heparin, an improved anticoagulant. The poor thermostability of heparinases significantly hinders their industrial and laboratory applications. To improve the thermostability of heparinases, we applied a rigid linker (EAAAK)5 (R) and a flexible linker (GGGGS)5 (F) to fuse maltose-binding protein (MBP) and HepI, HepII, and HepIII from Pedobacter heparinus, replacing the original linker from the plasmid pMAL-c2X. Compared with their parental fusion protein, MBP-fused HepIs, HepIIs, and HepIIIs with linkers (EAAAK)5 or (GGGGS)5 all displayed enhanced thermostability (half-lives at 30°C: 242%-464%). MBP-fused HepIs and HepIIs exhibited higher specific activity (127%-324%), whereas MBP-fused HepIIIs displayed activity similar to that of their parental fusion protein. Kinetics analysis revealed that MBP-fused HepIIs showed a significantly decreased affinity toward heparin with increased Km values (397%-480%) after the linker replacement, whereas the substrate affinity did not change significantly for MBP-fused HepIs and HepIIIs. Furthermore, it preliminarily appeared that the depolymerization mechanism of these fusion proteins may not change after linker replacement. These findings suggest the superior enzymatic properties of MBP-fused heparinases with suitable linker designs and their potential for the bioproduction of low-molecular-weight heparin.

Nanosensor based approaches for quantitative detection of heparin

Heparin, being a widely employed anticoagulant in numerus clinical complications, requires strict quantification and qualitative screening to ensure the safety of patients from potential threat of thrombocytopenia. However, the intricacy of heparin's chemical structures and low abundance hinders the precise monitoring of its level and quality in clinical settings. Conventional laboratory assays have limitations in sensitivity and specificity, necessitating the development of innovative approaches. In this context, nanosensors emerged as a promising solution due to enhanced sensitivity, selectivity, and ability to detect heparin even at low concentrations. This review delves into a range of sensing approaches including colorimetric, fluorometric, surface-enhanced Raman spectroscopy, and electrochemical techniques using different types of nanomaterials, thus providing insights of its principles, capabilities, and limitations. Moreover, integration of smart-phone with nanosensors for point of care diagnostics has also been explored. Additionally, recent advances in nanopore technologies, artificial intelligence (AI) and machine learning (ML) have been discussed offering specificity against contaminants present in heparin to ensure its quality. By consolidating current knowledge and highlighting the potential of nanosensors, this review aims to contribute to the advancement of efficient, reliable, and economical heparin detection methods providing improved patient care.

Biomedical applications of engineered heparin-based materials

Heparin is a negatively charged polysaccharide with various chain lengths and a hydrophilic backbone. Due to its fascinating chemical and physical properties, nontoxicity, biocompatibility, and biodegradability, heparin has been extensively used in different fields of medicine, such as cardiovascular and hematology. This review highlights recent and future advancements in designing materials based on heparin for various biomedical applications. The physicochemical and mechanical properties, biocompatibility, toxicity, and biodegradability of heparin are discussed. In addition, the applications of heparin-based materials in various biomedical fields, such as drug/gene delivery, tissue engineering, cancer therapy, and biosensors, are reviewed. Finally, challenges, opportunities, and future perspectives in preparing heparin-based materials are summarized.

Combination of engineering the substrate and Ca2+ binding domains of heparinase I to improve the catalytic activity

Heparinase I (EC 4.2.2.7), is an enzyme that cleaves heparin, showing great potential for eco-friendly production of low molecular weight heparin (LMWH). However, owing to its poor catalytic activity and thermal stability, the industrial application of heparinase I has been severely hindered. To improve the catalytic activity, we proposed to engineer both the substrate and Ca2+ binding domains of heparinase I. Several heparinases I from different organisms were selected for multiple sequence alignment and molecular docking to screen the key residues in the binding domain. Nine single-point mutations were selected to enhance the catalytic activity of heparinase I. Among them, T250D was the most highly active one, whereas mutations around Ca2+ binding domain yielded two active mutants. Mutant D152S/R244K/T250D with significantly increased catalytic activity was obtained by combined mutation. The catalytic efficiency of the mutant was 118,875.8 min-1·µM-1, which was improved 5.26 times. Molecular modeling revealed that the improved activity and stability of the mutants were probably attributed to the formation of new hydrogen bonds. The highly active mutant had great potential applications in industry and the strategy could be used to improve the performance of other enzymes.

Cloning, Expression, and Characterization of a Highly Stable Heparinase I from Bacteroides xylanisolvens

Heparinase I (Hep I), which specifically degrades heparin to oligosaccharide or unsaturated disaccharide, has an important role in the production of low molecular weight heparin (LMWH). However, low productivity and stability of heparinase I hinders its applications. Here, a novel heparinase I (BxHep-I) was cloned from Bacteroides xylanisolvens and overexpressed in soluble form in Escherichia coli. The expression conditions of BxHep-I were optimized for an activity of 7144 U/L. BxHep-I had a specific activity of 57.6 U/mg at the optimal temperature and pH of 30 °C and pH 7.5, with the Km and Vmax of 0.79 mg/mL and 124.58 U/mg, respectively. BxHep-I catalytic activity could be enhanced by Ca2+ and Mg2+, while strongly inhibited by Zn2+ and Co2+. Purified BxHep-I displayed an outstanding thermostability with half-lives of 597 and 158 min at 30 and 37 °C, respectively, which are the highest half-lives ever reported for heparinases I. After storage at 4 °C for one week, BxHep-I retained 73% of its initial activity. Molecular docking revealed that the amino acids Asn25, Gln27, Arg88, Lys116, His156, Arg161, Gln228, Tyr356, Lys358, and Tyr362 form 13 hydrogen bonds with the substrate heparin disaccharides in the substrate binding domain and are mainly involved in the substrate binding of BxHep-I. These results suggest that the BxHep-I with high stability could be a candidate catalyst for the industrial production of LMWH.

Analysis of the Glycosaminoglycan Chains of Proteoglycans

Glycosaminoglycans (GAGs) are heterogeneous, negatively charged, macromolecules that are found in animal tissues. Based on the form of component sugar, GAGs have been categorized into four different families: heparin/heparan sulfate, chondroitin/dermatan sulfate, keratan sulfate, and hyaluronan. GAGs engage in biological pathway regulation through their interaction with protein ligands. Detailed structural information on GAG chains is required to further understanding of GAG-ligand interactions. However, polysaccharide sequencing has lagged behind protein and DNA sequencing due to the non-template-driven biosynthesis of glycans. In this review, we summarize recent progress in the analysis of GAG chains, specifically focusing on techniques related to mass spectroscopy (MS), including separation techniques coupled to MS, tandem MS, and bioinformatics software for MS spectrum interpretation. Progress in the use of other structural analysis tools, such as nuclear magnetic resonance (NMR) and hyphenated techniques, is included to provide a comprehensive perspective.

A highly active heparinase I from Bacteroides cellulosilyticus: Cloning, high level expression, and molecular characterization

As one of the most extensively studied glycosaminoglycan lyases, heparinase I has been used in producing low or ultra-low molecular weight heparin. Its' important applications are to neutralize the heparin in human blood and analyze heparin structure in the clinic. However, the low productivity and activity of the enzyme have greatly hindered its applications. In this study, a novel Hep-I from Bacteroides cellulosilyticus (BcHep-I) was successfully cloned and heterologously expressed in E. coli BL21 (DE3) as a soluble protein. The molecular mass and isoelectric point (pI) of the enzyme are 44.42 kDa and 9.02, respectively. And the characterization of BcHep-I after purified with Ni-NTA affinity chromatography suggested that it is a mesophilic enzyme. BcHep-I can be activated by 1 mM Ca2+, Mg2+, and Mn2+, while severely inhibited by Zn2+, Co2+, and EDTA. The specific activity of the enzyme was 738.3 U·mg-1 which is the highest activity ever reported. The Km and Vmax were calculated as 0.17 mg·mL-1 and 740.58 U·mg-1, respectively. Besides, the half-life of 300 min at 30°C showed BcHep-I has practical applications. Homology modeling and substrate docking revealed that Gln15, Lys74, Arg76, Lys104, Arg149, Gln208, Tyr336, Tyr342, and Lys338 were mainly involved in the substrate binding of Hep-I, and 11 hydrogen bonds were formed between heparin and the enzyme. These results indicated that BcHep-I with high activity has great potential applications in the industrial production of heparin, especially in the clinic to neutralize heparin.

Chemically tailoring nanopores for single-molecule sensing and glycomics

A nanopore can be fairly-but uncharitably-described as simply a nanofluidic channel through a thin membrane. Even this simple structural description holds utility and underpins a range of applications. Yet significant excitement for nanopore science is more readily ignited by the role of nanopores as enabling tools for biomedical science. Nanopore techniques offer single-molecule sensing without the need for chemical labelling, since in most nanopore implementations, matter is its own label through its size, charge, and chemical functionality. Nanopores have achieved considerable prominence for single-molecule DNA sequencing. The predominance of this application, though, can overshadow their established use for nanoparticle characterization and burgeoning use for protein analysis, among other application areas. Analyte scope continues to be expanded, and with increasing analyte complexity, success will increasingly hinge on control over nanopore surface chemistry to tune the nanopore, itself, and to moderate analyte transport. Carbohydrates are emerging as the latest high-profile target of nanopore science. Their tremendous chemical and structural complexity means that they challenge conventional chemical analysis methods and thus present a compelling target for unique nanopore characterization capabilities. Furthermore, they offer molecular diversity for probing nanopore operation and sensing mechanisms. This article thus focuses on two roles of chemistry in nanopore science: its use to provide exquisite control over nanopore performance, and how analyte properties can place stringent demands on nanopore chemistry. Expanding the horizons of nanopore science requires increasing consideration of the role of chemistry and increasing sophistication in the realm of chemical control over this nanoscale milieu.

Surveying silicon nitride nanopores for glycomics and heparin quality assurance

Polysaccharides have key biological functions and can be harnessed for therapeutic roles, such as the anticoagulant heparin. Their complexity—e.g., >100 monosaccharides with variety in linkage and branching structure—significantly complicates analysis compared to other biopolymers such as DNA and proteins. More, and improved, analysis tools have been called for, and here we demonstrate that solid-state silicon nitride nanopore sensors and tuned sensing conditions can be used to reliably detect native polysaccharides and enzymatic digestion products, differentiate between different polysaccharides in straightforward assays, provide new experimental insights into nanopore electrokinetics, and uncover polysaccharide properties. We show that nanopore sensing allows us to easily differentiate between a clinical heparin sample and one spiked with the contaminant that caused deaths in 2008 when its presence went undetected by conventional assays. The work reported here lays a foundation to further explore polysaccharide characterization and develop assays using thin-film solid-state nanopore sensors.

The complexity of polysaccharides significantly complicates their analysis in comparison to other biopolymers. Here, the authors demonstrate that solid-state silicon nitride nanopore sensors can be used to reliably detect native polysaccharides and to perform a simple quality assurance assay on a polysaccharide therapeutic, heparin.

Lasers and ion mobility: new additions to the glycosaminoglycanomics toolkit

Glycosaminoglycans are biopolymers present in mammalian cells or in the extracellular matrix. To address their structure, the nature of the hexuronic acids and the position of sulfate groups must be determined. Tandem mass spectrometry using collision induced dissociation or electron-based fragmentation techniques, is a well-established approach for the identification of glycans but suffers from the frequent lack of diagnostic fragments in the case of glycosaminoglycans. This review presents alternative fragmentation techniques, namely photofragmentation in the IR and the UV ranges. Alternative approaches based on the direct analysis of the molecular structure, including ion mobility spectrometry and ion spectroscopies are reviewed. The potential of future multidimensional workflows for glycosaminoglycanomics is discussed.

Quantitative analysis of antithrombin III binding site in low molecular weight heparins by exhausetive heparinases digestion and capillary electrophoresis

The antithrombin III (ATIII)-binding site, which contains a special 3-O-sulfated, N-sulfated glucosamine residue with or without 6-O-sulfation, is mainly responsible for the anticoagulant activity of heparin. Undergoing the chemical depolymerization process, the preservation of the ATIII-binding site in low molecular weight heparins (LMWHs) are varied leading to the fluctuation of the anticoagulant activity. Herein we report a capillary electrophoresis (CE) method in combination with heparinase digestion and affinity chromatography for the measurement of molar percentage of ATIII-binding site of LMWHs. After exhaustively digesting LMWHs with the mixture of heparinase I, II and III, almost all the resulting oligosaccharide building blocks, including the three 3-O-sulfated tetrasaccharides derived from the ATIII-binding site, were resolved by CE separation. The peak area of each building block permits quantification of the molar percentage of the ATIII-binding site. The peaks corresponding to the 3-O-sulfated tetrasaccharides were assigned based on the linear relationship between the electrophoretic mobilities of the oligosaccharides and their charge to mass ratios. The peak assignment was further confirmed by analysis of the high ATIII affinity fractions, which contains much high 3-O-sulfated tetrasaccharides. With the method, the molar percentage of the ATIII-binding site of enoxaparin from different batches and different manufactures were measured and compared. It was demonstrated that the CE method provides more precise data for assessing the anti-FXa activity than that of the biochemical assay method.

Structural Characterization of the Low-Molecular-Weight Heparin Dalteparin by Combining Different Analytical Strategies

A number of low molecular weight heparin (LMWH) products are available for clinical use and although all share a similar mechanism of action, they are classified as distinct drugs because of the different depolymerisation processes of the native heparin resulting in substantial pharmacokinetic and pharmacodynamics differences. While enoxaparin has been extensively investigated, little information is available regarding the LMWH dalteparin. The present study is focused on the detailed structural characterization of Fragmin^® by LC-MS and NMR applied both to the whole drug and to its enzymatic products. For a more in-depth approach, size homogeneous octasaccharide and decasaccharide components together with their fractions endowed with high or no affinity toward antithrombin were also isolated and their structural profiles characterized. The combination of different analytical strategies here described represents a useful tool for the assessment of batch-to-batch structural variability and for comparative evaluation of structural features of biosimilar products.

Determining the extent of heparan sulfate depolymerisation following heparin lyase treatment

The depolymerisation of porcine mucosal heparan sulfate under the action of heparin lyases and analysis by size-exclusion chromatography (SEC) is described. Heparan sulfate treated to enzymic bond scission producing a Δ4,5 double-bond and quantified by SEC with ultraviolet-visible (UV) spectroscopic detection (230nm) indicated that the majority of the biopolymer (>85%) was reduced to disaccharides (degree of polymerisation (DP)=2). However, analysis of the SEC eluant using refractive index (RI), which reflects the mass contribution of the oligosaccharides rather than the molar response of a UV chromophore, indicated that a considerable proportion of the digested HS, up to 43%, was present with DP >2. This was supported by a mass balance analysis. These results contradict the accepted literature where "complete digestion" is routinely reported. Herein we report on the composition and methodology utilised to ascertain the extent of depolymerization and disaccharide composition of this important biopolymer.

Analysis of heparin oligosaccharides by capillary electrophoresis-negative-ion electrospray ionization mass spectrometry

Most hyphenated analytical approaches that rely on liquid chromatography-MS require relatively long separation times, produce incomplete resolution of oligosaccharide mixtures, use eluents that are incompatible with electrospray ionization, or require oligosaccharide derivatization. Here we demonstrate the analysis of heparin oligosaccharides, including disaccharides, ultralow molecular weight heparin, and a low molecular weight heparin, using a novel electrokinetic pump-based CE-MS coupling eletrospray ion source. Reverse polarity CE separation and negative-mode electrospray ionization were optimized using a volatile methanolic ammonium acetate electrolyte and sheath fluid. The online CE hyphenated negative-ion electrospray ionization MS on an LTQ Orbitrap mass spectrometer was useful in disaccharide compositional analysis and bottom-up and top-down analysis of low molecular weight heparin. The application of this CE-MS method to ultralow molecular heparin suggests that a charge state distribution and the low level of sulfate group loss that is achieved make this method useful for online tandem MS analysis of heparins. Graphical abstract Most hyphenated analytical approaches that rely on liquid chromatography-MS require relatively long separation times, produce incomplete resolution of oligosaccharide mixtures, use eluents that are incompatible with electrospray ionization, or require oligosaccharide derivatization. Here we demonstrate the analysis of heparin oligosaccharides, including disaccharides, ultralow molecular weight heparin, and a low molecular weight heparin, using a novel electrokinetic pump-based CE-MS coupling eletrospray ion source. Reverse polarity CE separation and negative-mode electrospray ionization were optimized using a volatile methanolic ammonium acetate electrolyte and sheath fluid. The online CE hyphenated negative-ion electrospray ionization MS on an LTQ Orbitrap mass spectrometer was useful in disaccharide compositional analysis and bottom-up and top-down analysis of low molecular weight heparin. The application of this CE-MS method to ultralow molecular heparin suggests that a charge state distribution and the low level of sulfate group loss that is achieved make this method useful for online tandem MS analysis of heparins.

De Novo Sequencing of Complex Mixtures of Heparan Sulfate Oligosaccharides

Here, we describe the first sequencing method of a complex mixture of heparan sulfate tetrasaccharides by LC-MS/MS. Heparin and heparan sulfate (HS) are linear polysaccharides that are modified in a complex manner by N- and O-sulfation, N-acetylation, and epimerization of the uronic acid. Heparin and HS are involved in various essential cellular communication processes. The structural analysis of these glycosaminoglycans is challenging due to the lability of their sulfate groups, the high heterogeneity of modifications, and the epimerization of the uronic acids. While advances in liquid chromatography (LC) and mass spectrometry (MS) have enabled compositional profiling of HS oligosaccharide mixtures, online separation and detailed structural analysis of isomeric and epimeric HS mixtures has not been achieved. Here, we report the development and evaluation of a chemical derivatization and tandem mass spectrometry method that can separate and identify isomeric and epimeric structures from complex mixtures. A series of well-defined synthetic HS tetrasaccharides varying in sulfation patterns and uronic acid epimerization were analyzed by chemical derivatization and LC-MS/MS. These synthetic compounds made it possible to establish relationships between HS structure, chromatographic behavior and MS/MS fragmentation characteristics. Using the analytical characteristics determined through the analysis of the synthetic HS tetrasaccharide standards, an HS tetrasacharide mixture derived from natural sources was successfully sequenced. This method represents the first sequencing of complex mixtures of HS oligosaccharides, an essential milestone in the analysis of structure-function relationships of these carbohydrates.

Applications of capillary electrophoresis electrospray ionization mass spectrometry in glycosaminoglycan analysis

Proteoglycans (PGs) represent a class of heavily glycosylated proteins distributed in the extracellular matrix, connective tissues, and on the surface of many cell types where, as functional molecules, regulate important biological processes. Structurally, PGs consist of a core protein linked to glycosaminoglycan (GAG) chains, which basically determine the properties and activities of PGs. In view of the structural complexity of GAGs and the existing correlation between this structure and PG functions, systematic efforts are invested into development of analytical methods for GAG characterization. Although less popular and of higher technical difficulty than liquid-based chromatographic methods, CE coupled with ESI MS contributed lately an important progress to glycosaminoglycomics field. In this review article, the most significant CE ESI MS and MS/MS applications in GAG research are highlighted and critically assessed. The advantages and the limitations of each concept as well as the possible further methodological refinements are also concisely discussed. Finally, the review presents the perspectives of CE ESI MS in GAG analysis along with the objectives, which still need to be reached in the near future.

Spectral study of interaction between chondroitin sulfate and nanoparticles and its application in quantitative analysis

In this work, the interaction between chondroitin sulfate (CS) and gold nanoparticles (GNPs) and silver nanoparticles (SNPs) was characterized for the first time. Plasma resonance scattering (PRS) and plasma resonance absorption (PRA) were used to investigate the characteristics of their spectrum. The results suggested that the CS with negative charge could interact with metal nanoparticles with negative charge and the adsorption of CS on the surface of SNPs was more regular than that of GNPs. The resonance scattering spectra also further confirmed the interaction between CS and SNPs. A new method for detection of CS based on the interaction was developed. CS concentrations in the range of 0.02-3.5 μg/mL were proportional to the decreases of absorbance of SNPs. Compared with other reported methods, the proposed method is simple and workable without complex process, high consumption and expensive equipments. The developed method was applied to the determination of the CS contents from different biological origins and the results were compared with those obtained by the method of Chinese Pharmacopeia. The effects of matrix in plasma and other glycosaminoglycans on the determination of CS were also investigated. The results showed that a small quantity of blood plasma had no effect on the determination of CS and when the concentration ratio of CS to heparin was more than 10:1, the influence of heparin on the detection of CS could be ignored. This work gave a specific research direction for the detection of CS in the presence of metal nanoparticles.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: an update for 2009-2010

This review is the sixth update of the original article published in 1999 on the application of MALDI mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2010. General aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, arrays and fragmentation are covered in the first part of the review and applications to various structural typed constitutes the remainder. The main groups of compound that are discussed in this section are oligo and polysaccharides, glycoproteins, glycolipids, glycosides and biopharmaceuticals. Many of these applications are presented in tabular form. Also discussed are medical and industrial applications of the technique, studies of enzyme reactions and applications to chemical synthesis.

Re-visiting the structure of heparin

The sulfated polysaccharide heparin has been used as a life-saving anticoagulant in clinics well before its detailed structure was known. This mini-review is a survey of the evolution in the discovery of the primary and secondary structure of heparin. Highlights in this history include elucidation and synthesis of the specific sequence that binds to antithrombin, the development of low-molecular-weight heparins currently used as antithrombotic drugs, and the most promising start of chemo-enzymatic synthesis. Special emphasis is given to peculiar conformational properties contributing to interaction with proteins that modulate different biological properties.

Ultrasonic-assisted preparation of a low molecular weight heparin (LMWH) with anticoagulant activity

Low molecular weight heparin (LMWH) is currently used as an anticoagulant agent and constitutes an alternative to unfractionated heparin, which is the cause of serious adverse drug reaction such as heparin-induced thrombocytopenia (HIT). Commercially available LMWH is produced by enzymatic depolymerization that is costly or by chemical methods that are generally carried out under conditions that could imply side reactions that reduce final product efficiency and yields. In this work, we present the use of a physicochemical method for the production of LMWH. This method consists in the use of hydrogen peroxide-catalyzed radical hydrolysis assisted by ultrasonic waves. LMWH that are produced using this physicochemical method have an average molecular weight and anticoagulant properties (Anti-Xa and Anti-IIa) that are comparable to some of commercial LMWH that are currently used. Ultrasonic-assisted radical depolymerization of heparin leads to products with a remarkably low polydispersity index. Moreover, in comparison to other LMWH such as those produced by enzymatic β-elimination, this physicochemical depolymerization of heparin induces fewer oligosaccharides with less than five monosaccharide units. This contributes to the better preservation of the ATIII pentasaccharide binding sequence, which results in a high Anti-Xa/Anti-IIa ratio (1.86). However, LMWH obtained using this physicochemical method have a lower degree of sulfation than other LMWH, which seems to be the cause of a lower Anti-Xa and Anti-IIa activity (143.62±5.42 and 77.07±4.4, respectively).

Near infrared fluorescent trypsin stabilized gold nanoclusters as surface plasmon enhanced energy transfer biosensor and in vivo cancer imaging bioprobe

The simplicity of the green-synthesized routine and the availability of surface modification of diverse bioactive molecules make noble metal nanostructures highly suitable as multifunctional biomaterials for biological and biomedical application. Here, we report the preparation of trypsin stabilized gold nanoclusters (try-AuNCs) with near-infrared fluorescence for biosensing heparin based on surface plasmon enhanced energy transfer (SPEET) and folic acid (FA) modified try-AuNCs for in vivo cancer bioimaging. The SPEET/try-AuNCs fluorescence biosensor was designed via heparin mediated energy transfer between try-AuNCs and cysteamine modified gold nanoparticles (cyst-AuNPs). The developed SPEET/try-AuNCs fluorescence biosensor allowed sensitive and selective detection of heparin with a linear range of 0.1-4.0 μg mL(-1) and a detection limit (3s) of 0.05 μg mL(-1). The relative standard deviation for eleven replicate detections of 2.5 μg mL(-1) heparin was 1.1%, and the recoveries of the spiked heparin in human serum samples ranged from 97% to 100%. In addition, folic acid was immobilized on the surface of try-AuNCs to ameliorate the specific affinity of AuNCs for tumors, and the near-infrared fluorescent FA-try-AuNCs were applied for in vivo cancer imaging of high folate receptor (FR) expressing Hela tumor. In vivo study of the dynamic behavior and targeting ability of FA-try-AuNCs probe to Hela tumor bearing mice and normal nude mice validated the high specific affinity of FA-try-AuNCs probe to FR positive tumors. The results show that the prepared try-AuNCs have great potential as multifunctional biomaterials for biosensing biomolecules with SPEET mode and in vivo cancer imaging with high targeting ability.

Rational design of a tripartite fusion protein of heparinase I enables one-step affinity purification and real-time activity detection

Enzymatic degradation of heparin has great potential as an ecological and specific way to produce low molecular weight heparin. However, the commercial use of heparinase I (HepA), one of the most important heparin lyases, has been hampered by low productivity and poor thermostability. Fusion with green fluorescent protein (GFP) or maltose-binding protein (MBP) has shown potential in facilitating the industrial use of HepA. Thus, tripartite fusion of GFP, MBP and HepA would be a promising approach. Therefore, in the present study, the tripartite fusion strategy was systematically studied, mainly focusing on the fusion order and the linker sequence, to obtain a fusion protein offering one-step purification and real-time detection of HepA activity by fluorescence as well as high HepA activity and thermostability. Our results show that fusion order is important for MBP binding affinity and HepA activity, while the linker sequences at domain junctions have significant effects on protein expression level, HepA activity and thermostability as well as GFP fluorescence. The best tripartite fusion was identified as MBP-(EAAAK)(3)-GFP-(GGGGS)(3)-HepA, which shows potential to facilitate the production of HepA and its application in industrial preparation of low molecular weight heparin.

Capillary electrophoresis of heparin and other glycosaminoglycans using a polyamine running electrolyte

This study involves the use of polyamines as potential resolving agents for the capillary electrophoresis (CE) of glycosaminoglycans (GAGs), specifically heparin, dermatan sulfate, chondroitin sulfate, over-sulfated chondroitin sulfate (OSCS), and hyaluronan. All of the compounds can be separated from each other with the exception of chondroitin sulfate and hyaluronan. Using optimization software, the final run conditions are found to be 200 mM ethylenediamine and 45.5 mM phosphate as the electrolyte with -14 V applied across a 50 μm ID×24.5 cm fused silica capillary at 15°C. The ion migration order, with OSCS as the last instead of the first peak, is in contrast to previous reports using either a high molarity TRIS or lithium phosphate run buffer with narrower bore capillaries. Total analysis time is 12. 5 min and the relative standard deviation of the heparin migration time is about 2.5% (n=5). The interaction mechanism between selected polyamines and heparin is explored using conductivity measurements in addition to CE experiments to show that an ion-pairing mechanism is likely.

Application of 2,3-naphthalenediamine in labeling natural carbohydrates for capillary electrophoresis

Neutral and acidic monosaccharide components in Ganoderma lucidum polysaccharide are readily labeled with 2,3-naphthalenediamine, and the resulting saccharide-naphthimidazole (NAIM) derivatives are quantified by capillary electrophoresis (CE) in borate buffer. Using sulfated-α-cyclodextrin as the chiral selector, enantiomers of monosaccharide-NAIMs are resolved on CE in phosphate buffer, allowing a simultaneous determination of the absolute configuration and sugar composition in the mucilage polysaccharide of a medicinal herb Dendrobiumhuoshanense. Together with the specific enzymatic reactions of various glycoside hydrolases on the NAIM derivatives of glycans, the structures of natural glycans can be deduced from the digestion products identified by CE analysis. Though heparin dissachrides could be successfully derived with the NAIM-labeling method, the heparin derivatives with the same degree of sulfation could not be separated by CE.

Combination of site-directed mutagenesis and calcium ion addition for enhanced production of thermostable MBP-fused heparinase I in recombinant Escherichia coli

Heparinase I (HepI), which specifically cleaves heparin and heparan sulfate, is one of the most extensively studied glycosaminoglycan lyases. Low productivity of HepI has largely hindered its industrial and pharmaceutical applications. Loss of bacterial HepI enzyme activity through poor thermostability during its expression and purification process in production can be an important issue. In this study, using a thermostabilization strategy combining site-directed mutagenesis and calcium ion addition during its production markedly improved the yield of maltose-binding protein-fused HepI (MBP-HepI) from recombinant Escherichia coli. Substitution of Cys297 to serine in MBP-HepI offered a 30.6% increase in the recovered total enzyme activity due to a mutation-induced thermostabilizing effect. Furthermore, upon addition of Ca2+ as a stabilizer at optimized concentrations throughout its expression, extraction, and purification process, purified mutant MBP-HepI showed a specific activity of 56.3 IU/mg, 206% higher than that of the wild type obtained without Ca2+ addition, along with a 177% increase in the recovered total enzyme activity. The enzyme obtained through this novel approach also exhibited significantly enhanced thermostability, as indicated by both experimental data and the kinetic modeling. High-yield production of thermostable MBP-HepI using the present system will facilitate its applications in laboratory-scale heparin analysis as well as industrial-scale production of low molecular weight heparin as an improved anticoagulant substitute.

Low-molecular-weight heparins: differential characterization/physical characterization

Low-molecular-weight heparins (LMWHs), derived from unfractionated heparin (UFH) through different depolymerization processes, have advantages with respect to the parent heparin in terms of pharmacokinetics, convenience of administration, and reduced side effects. Each LMWH can be considered as an independent drug with its own activity profile, placing significance on their biophysical characterization, which will also enable a better understanding of their structure-function relationship. Several chemical and physical methods, some involving sample modification, are now available and are reviewed.

Linear polyalkylamines as fingerprinting agents in capillary electrophoresis of low-molecular-weight heparins and glycosaminoglycans

Glycosaminoglycan (GAG) analysis represents a challenging frontier despite the advent of many high-resolution technologies because of their unparalleled structural complexity. We previously developed a resolving agent-aided capillary electrophoretic approach for fingerprinting low-molecular-weight heparins (LMWHs) to profile their microscopic differences and assess batch-to-batch variability. In this report, we study the application of this approach for fingerprinting other GAGs and analyze the basis for the fingerprints observed in CE. Although the resolving agents, linear polyalkylamines, could resolve the broad featureless electropherogram of LMWH into a large number of distinct, highly reproducible peaks, longer GAGs such as chondroitin sulfate, dermatan sulfate, and heparin responded in a highly individualistic manner. Full-length heparin interacted with linear polyalkylamines very strongly followed by dermatan sulfate, whereas chondroitin sulfate remained essentially unaffected. Oversulfated chondroitin sulfate could be easily identified from full-length heparin. Scatchard analysis of the binding profile of enoxaparin with three linear polyalkylamines displayed a biphasic binding profile suggesting two distinctly different types of interactions. Some LMWH chains were found to interact with linear polyalkylamines with affinities as high as 10 nM, whereas others displayed nearly 5000-fold weaker affinities. These observations provide fundamental insight into the basis for fingerprinting of LMWHs by linear polyalkylamine-based resolving agents, which could be utilized in the design of advanced resolving agents for compositional profiling, direct sequencing, and chemoinformatics studies.

Turn-on room temperature phosphorescence assay of heparin with tunable sensitivity and detection window based on target-induced self-assembly of polyethyleneimine capped Mn-doped ZnS quantum dots

Room-temperature phosphorescence (RTP) turn-on assay of heparin with tunable sensitivity and detection window was demonstrated on the basis of the target induced self-assembly of polyethyleneimine capped Mn-doped ZnS (PEI-Mn-ZnS) QDs. The proposed method can cover the whole therapeutic dosing concentration range in postoperation and long-term therapy (0.2-1.2 U/mL, 1.7-10 μM) and cardiovascular surgery (2-8 U/mL, 17-67 μM) in 10 mM Tris-HCl (pH 7.4) buffer and can be applied for heparin determination in 100-fold diluted human serum samples. The tunable sensitivity and detection window was ascribed to the tunable particle size and ligand loading amount of PEI-Mn-ZnS QD arising from the chain length (or molecule weight) and feed amount of PEI. The chain length of PEI exhibited significant effect on the particle size and ligand loading amount and ultimately had important influence on both the sensitivity and detection window. The feeding amount of PEI, however, greatly affected the ligand loading amount alone and, in turn, affected only the detection window.

From single to multiple microcoil flow probe NMR and related capillary techniques: a review

Nuclear magnetic resonance (NMR) spectroscopy is one of the most important and powerful instrumental analytical techniques for structural elucidation of unknown small and large (complex) isolated and synthesized compounds in organic and inorganic chemistry. X-ray crystallography, neutron scattering (neutron diffraction), and NMR spectroscopy are the only suitable methods for three-dimensional structure determination at atomic resolution. Moreover, these methods are complementary. However, by means of NMR spectroscopy, reaction dynamics and interaction processes can also be investigated. Unfortunately, this technique is very insensitive in comparison with other spectrometric (e.g., mass spectrometry) and spectroscopic (e.g., infrared spectroscopy) methods. Mainly through the development of stronger magnets and more sensitive solenoidal microcoil flow probes, this drawback has been successfully counteracted. Capillary NMR spectroscopy increases the mass-based sensitivity of the NMR spectroscopic analysis up to 100-fold compared with conventional 5-mm NMR probes, and thus can be coupled online and off-line with other microseparation and detection techniques. It offers not only higher sensitivity, but in many cases provides better quality spectra than traditional methods. Owing to the immense number of compounds (e.g., of natural product extracts and compound libraries) to be examined, single microcoil flow probe NMR spectroscopy will soon be far from being sufficiently effective as a screening method. For this reason, an inevitable trend towards coupled microseparation-multiple microcoil flow probe NMR techniques, which allow simultaneous online and off-line detection of several compounds, will occur. In this review we describe the current status and possible future developments of single and multiple microcoil capillary flow probe NMR spectroscopy and its application as a high-throughput tool for the analysis of a large number of mass-limited samples. The advantages and drawbacks of different coupled microseparation-capillary NMR spectroscopy techniques, such as capillary high-performance liquid chromatography-NMR spectroscopy, capillary electrophoresis-NMR spectroscopy, and capillary gas chromatography-NMR spectroscopy, are discussed and demonstrated by specific applications. Another subject of discussion is the progress in parallel NMR detection techniques. Furthermore, the applicability and mixing capability of tiny reactor systems, termed "microreactors" or "micromixers," implemented in NMR probes is demonstrated by carbamate- and imine-forming reactions.

Synthesis, separation, and characterization of amphiphilic sulfated oligosaccharides enabled by reversed-phase ion pairing LC and LC-MS methods

Synthesis of amphiphilic oligosaccharides is problematic because traditional methods for separating and purifying oligosaccharides, including sulfated oligosaccharides, are generally not applicable to working with amphiphilic sugars. We report here RPIP-LC and LC-MS methods that enable the synthesis, separation, and characterization of amphiphilic N-arylacyl O-sulfonated aminoglycosides, which are being pursued as small-molecule glycosaminoglycan mimics. The methods described in this work for separating and characterizing these amphiphilic saccharides are further applied to a number of uses: monitoring the progression of sulfonation reactions with analytical RP-HPLC, characterizing sulfate content for individual molecules with ESI-MS, determining the degree of sulfation for products having mixed degrees of sulfation with HPLC and LC-MS, and purifying products with benchtop C18 column chromatography. We believe that the methods described here will be broadly applicable to enabling the synthesis, separation, and characterization of amphiphilic, sulfated, and phosphorylated oligosaccharides and other types of molecules substituted to varying degrees with both anionic and hydrophobic groups.

Fluorescent liposomes for differential interactions with glycosaminoglycans

We have successfully synthesized a lipid containing the pyranine dye as the hydrophilic headgroup. This lipid was incorporated into liposomes with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine as the major component. The resultant liposomes displayed differential modulations in fluorescence emission intensity in the presence of nanomolar concentrations of different glycosaminoglycans. Linear discriminant analysis of the fluorescence response data demonstrate that the liposomes are able to distinguish between different GAGs. In addition, we also demonstrate that the liposomes incorporating the pyranine lipid are able to distinguish between dilute serum from healthy individuals and serum containing elevated chondroitin sulfate (simulated serum from an Alzheimer's disease patient).

Heparin characterization: challenges and solutions

Although heparin is an important and widely prescribed pharmaceutical anticoagulant, its high degree of sequence microheterogeneity and size polydispersity make molecular-level characterization challenging. Unlike nucleic acids and proteins that are biosynthesized through template-driven assembly processes, heparin and the related glycosaminoglycan heparan sulfate are actively remodeled during biosynthesis through a series of enzymatic reactions that lead to variable levels of O- and N-sulfonation and uronic acid epimers. As summarized in this review, heparin sequence information is determined through a bottom-up approach that relies on depolymerization reactions, size- and charge-based separations, and sensitive mass spectrometric and nuclear magnetic resonance experiments to determine the structural identity of component oligosaccharides. The structure-elucidation process, along with its challenges and opportunities for future analytical improvements, is reviewed and illustrated for a heparin-derived hexasaccharide.