Effect of fixation and embedding on Raman spectroscopic analysis of bone tissue

Physicochemical understanding of biomineralization by molecular vibrational spectroscopy: From mechanism to nature

The process and mechanism of biomineralization and relevant physicochemical properties of mineral crystals are remarkably sophisticated multidisciplinary fields that include biology, chemistry, physics, and materials science. The components of the organic matter, structural construction of minerals, and related mechanical interaction, etc., could help to reveal the unique nature of the special mineralization process. Herein, the paper provides an overview of the biomineralization process from the perspective of molecular vibrational spectroscopy, including the physicochemical properties of biomineralized tissues, from physiological to applied mineralization. These physicochemical characteristics closely to the hierarchical mineralization process include biological crystal defects, chemical bonding, atomic doping, structural changes, and content changes in organic matter, along with the interface between biocrystals and organic matter as well as the specific mechanical effects for hardness and toughness. Based on those observations, the special physiological properties of mineralization for enamel and bone, as well as the possible mechanism of pathological mineralization and calcification such as atherosclerosis, tumor micro mineralization, and urolithiasis are also reviewed and discussed. Indeed, the clearly defined physicochemical properties of mineral crystals could pave the way for studies on the mechanisms and applications.

Composition and micromechanical properties of the femoral neck compact bone in relation to patient age, sex and hip fracture occurrence

Current clinical methods of bone health assessment depend to a great extent on bone mineral density (BMD) measurements. However, these methods only act as a proxy for bone strength and are often only carried out after the fracture occurs. Besides BMD, composition and tissue-level mechanical properties are expected to affect the whole bone's strength and toughness. While the elastic properties of the bone extracellular matrix (ECM) have been extensively investigated over the past two decades, there is still limited knowledge of the yield properties and their relationship to composition and architecture. In the present study, morphological, compositional and micropillar compression bone data was collected from patients who underwent hip arthroplasty. Femoral neck samples from 42 patients were collected together with anonymous clinical information about age, sex and primary diagnosis (coxarthrosis or hip fracture). The femoral neck cortex from the inferomedial region was analyzed in a site-matched manner using a combination of micromechanical testing (nanoindentation, micropillar compression) together with micro-CT and quantitative polarized Raman spectroscopy for both morphological and compositional characterization. Mechanical properties, as well as the sample-level mineral density, were constant over age. Only compositional properties demonstrate weak dependence on patient age: decreasing mineral to matrix ratio (p = 0.02, R2 = 0.13, 2.6 % per decade) and increasing amide I sub-peak ratio I∼1660/I∼1683 (p = 0.04, R2 = 0.11, 1.5 % per decade). The patient's sex and diagnosis did not seem to influence investigated bone properties. A clear zonal dependence between interstitial and osteonal cortical zones was observed for compositional and elastic bone properties (p < 0.0001). Site-matched microscale analysis confirmed that all investigated mechanical properties except yield strain demonstrate a positive correlation with the mineral fraction of bone. The output database is the first to integrate the experimentally assessed microscale yield properties, local tissue composition and morphology with the available patient clinical information. The final dataset was used for bone fracture risk prediction in-silico through the principal component analysis and the Naïve Bayes classification algorithm. The analysis showed that the mineral to matrix ratio, indentation hardness and micropillar yield stress are the most relevant parameters for bone fracture risk prediction at 70 % model accuracy (0.71 AUC). Due to the low number of samples, further studies to build a universal fracture prediction algorithm are anticipated with the higher number of patients (N > 200). The proposed classification algorithm together with the output dataset of bone tissue properties can be used for the future comparison of existing methods to evaluate bone quality as well as to form a better understanding of the mechanisms through which bone tissue is affected by aging or disease.

Techniques for advanced glycation end product measurements for diabetic bone disease: pitfalls and future directions

PURPOSE OF REVIEW

Multiple biochemical and biophysical approaches have been broadly used for detection and quantitation of posttranslational protein modifications associated with diabetic bone, yet these techniques present a variety of challenges. In this review, we discuss recent advancements and complementary roles of analytical (UPLC/UPLC-MS/MS and ELISA) and biophysical (Raman and FTIR) techniques used for characterization of glycation products, measured from bone matrix and serum, and provide recommendations regarding the selection of a technique for specific study of diabetic bone.

RECENT FINDINGS

Hyperglycemia and oxidative stress in diabetes contribute to the formation of a large subgroup of advanced glycation end products (AGEs) known as glycoxidation end products (AGOEs). AGEs/AGOEs have various adverse effects on bone health. Commonly, accumulation of AGEs/AGOEs leads to increased bone fragility. For example, recent studies show that carboxymethyllysine (CML) and pentosidine (PEN) are formed in bone at higher levels in certain diseases and metabolic conditions, in particular, in diabetes and aging. Detection and quantitation of AGEs/AGOEs in rare and/or precious samples is feasible because of a number of technological advancements of the past decade.

SUMMARY

Recent technological advancements have led to a significant improvement of several key analytical biochemistry and biophysics techniques used for detection and characterization of AGEs/AGOEs in bone and serum. Their principles and applications to skeletal tissue studies as well as limitations are discussed in this review.

Calcimimetics Alter Periosteal and Perilacunar Bone Matrix Composition and Material Properties in Early Chronic Kidney Disease

Chronic kidney disease (CKD) affects 15% of Americans and greatly increases fracture risk due to elevated parathyroid hormone, cortical porosity, and reduced bone material quality. Calcimimetic drugs are used to lower parathyroid hormone (PTH) in CKD patients, but their impact on bone matrix properties remains unknown. We hypothesized that tissue-level bone quality is altered in early CKD and that calcimimetic treatment will prevent these alterations. To test this hypothesis, we treated Cy/+ rats, a model of spontaneous and progressive CKD-mineral and bone disorder (CKD-MBD), with KP-2326, a preclinical analogue of etelcalcetide, early in the CKD disease course. To measure tissue-level bone matrix composition and material properties, we performed colocalized Raman spectroscopy and nanoindentation on new periosteal bone and perilacunar bone using hydrated femur sections. We found that CKD and KP treatment lowered mineral type B carbonate substitution whereas KP treatment increased mineral crystallinity in new periosteal bone. Reduced elastic modulus was lower in CKD but was not different in KP-treated rats versus CTRL. In perilacunar bone, KP treatment lowered type B carbonate substitution, increased crystallinity, and increased mineral-to-matrix ratio in a spatially dependent manner. KP treatment also increased reduced elastic modulus and hardness in a spatially dependent manner. Taken together, these data suggest that KP treatment improves material properties on the tissue level through a combination of lowering carbonate substitution, increasing mineral crystallinity, and increasing relative mineralization of the bone early in CKD. As a result, the mechanical properties were improved, and in some regions, were the same as control animals. Therefore, calcimimetics may help prevent CKD-induced bone deterioration by improving bone quality in new periosteal bone and in bone tissue near osteocyte lacunae. © 2022 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Critical aspects of Raman spectroscopy as a tool for postmortem interval estimation

The estimation of the postmortem interval (PMI) from skeletal remains represents a challenging task in forensic science. PMI is often influenced by extrinsic factors (humidity, dryness, scavengers, etc.) and intrinsic factors (age, sex, pathology, way of life, medical treatments, etc.). Raman spectroscopy combined with multivariate data analysis represents a promising tool for forensic anthropologists. Despite all the advantages of the technique, Raman spectra of skeletal remains are influenced by these extrinsic and intrinsic factors, which impairs precision and reproducibility. Both parameters have to reach a high level of confidence when such spectroscopy is used as a way to predict PMI. As a consequence, advanced multivariate data analysis is necessary to quantify the effect of all factors to improve the estimation of the PMI. The objective of this work is to evaluate the effect of intrinsic and extrinsic factors on the Raman spectra of skeletal remains. We designed a protocol close to a real-world scenario. We used ANOVA-simultaneous component analysis (ASCA) to unmix and quantify the effect of 1 intrinsic (source body) and 1 extrinsic (burial time) factors on the Raman spectra. In our model, the burial time was found to generate the highest variability after the source body. ASCA showed that the variability due to the burial time has 2 mixed contributions. Seasonal variations are the first contribution. The second contribution is attributed to diagenesis. A decrease in the mineral bands and an increase in the organic bands are observed. The source body was also found to contribute to the variability in Raman spectra. ASCA showed that the source body induces variability related to the composition of bones. This quantification cannot be assessed by basic chemometrics methods such as PCA. The results of this study highlighted the need to use an advanced chemometric data analysis tool (like ASCA) combined with Raman spectroscopy to estimate the postmortem interval.

PCA-Assisted Raman Analysis of Osteonecrotic Human Femoral Heads

Osteonecrosis of the femoral head (ONFH) occurs frequently in adolescents and young adults and causes progressive deformation and destruction of the hip joint and impairs standing and walking, resulting in a significant decrease in the quality of life of patients. In addition, studies have shown that a history of corticosteroid administration and heavy alcohol consumption are closely related to the occurrence of ONFH. However, the detailed mechanism by which steroid administration and alcohol consumption are associated with the development of the disease is still unknown. With many researches still ongoing and without a clear biological pathway for osteonecrosis, effective preventive measures cannot be taken. Therefore, the current focus of ONFH treatment is to establish an early diagnosis and treatment strategy. We obtained the femoral heads of four patients with steroidal ONFH and three patients with alcoholic ONFH. We then compared the femoral heads of steroidal and alcoholic osteonecrosis by analyzing them at the molecular level by Raman spectroscopy. Crystallographic changes (deformations) in the mineral phase and fraction of organic material respect to the total mass were then plotted as a function. We found that changes in bone composition in ONFH were different in steroidal and alcoholic ONFH. We conclude that this suggests that the developmental mechanisms of steroidal and alcoholic ONFH may follow different paths. We also noticed that while steroid seem to lead to a more marked degradation of the tissue, alcohol seem to affect also the quality of the healthy tissue.

Effects of Raloxifene and tibial loading on bone mass and mechanics in male and female mice

Purpose: Raloxifene (RAL) is a selective estrogen receptor modulator (SERM) that has previously been shown to cause acellular benefits to bone tissue. Due to these improvements, RAL was combined with targeted tibial loading to assess if RAL treatment during periods of active bone formation would allow for further mechanical enhancements.Methods: Structural, mechanical, and microstructural effects were assessed in bone from C57BL/6 mice that were treated with RAL (0.5 mg/kg), tibial loading, or both for 6 weeks, beginning at 10 weeks of age.Results:Ex vivo microcomputed tomography (CT) images indicated RAL and loading work together to improve bone mass and architecture, especially within the cancellous region of males. Increases in cancellous bone volume fraction were heavily driven by increases in trabecular thickness, though there were some effects on trabecular spacing and number. In the cortical regions, RAL and loading both increased cross-sectional area, cortical area, and cortical thickness. Whole-bone mechanical testing primarily indicated the effects of loading. Further characterization through Raman spectroscopy and nanoindentation showed load-based changes in mineralization and micromechanics, while both loading and RAL caused changes in the secondary collagen structure. In contrast to males, in females, there were large load-based effects in the cancellous and cortical regions, resulting in increased whole-bone mechanical properties. RAL had less of an effect on cancellous and cortical architecture, though some effects were still present.Conclusion: RAL and loading work together to impact bone architecture and mechanical integrity, leading to greater improvements than either treatment individually.

Compositional assessment of bone by Raman spectroscopy

Raman spectroscopy (RS) is used to analyze the physiochemical properties of bone because it is non-destructive and requires minimal sample preparation. With over two decades of research involving measurements of mineral-to-matrix ratio, type-B carbonate substitution, crystallinity, and other compositional characteristics of the bone matrix by RS, there are multiple methods to acquire Raman signals from bone, to process those signals, and to determine peak ratios including sub-peak ratios as well as the full-width at half maximum of the most prominent Raman peak, which is nu1 phosphate (ν1PO4). Selecting which methods to use is not always clear. Herein, we describe the components of RS instruments and how they influence the quality of Raman spectra acquired from bone because signal-to-noise of the acquisition and the accompanying background fluorescence dictate the pre-processing of the Raman spectra. We also describe common methods and challenges in preparing acquired spectra for the determination of matrix properties of bone. This article also serves to provide guidance for the analysis of bone by RS with examples of how methods for pre-processing the Raman signals and for determining properties of bone composition affect RS sensitivity to potential differences between experimental groups. Attention is also given to deconvolution methods that are used to ascertain sub-peak ratios of the amide I band as a way to assess characteristics of collagen type I. We provide suggestions and recommendations on the application of RS to bone with the goal of improving reproducibility across studies and solidify RS as a valuable technique in the field of bone research.

Label-free quantification of soft tissue alignment by polarized Raman spectroscopy

The organization of proteins is an important determinant of functionality in soft tissues. However, such organization is difficult to monitor over time in soft tissue with complex compositions. Here, we establish a method to determine the alignment of proteins in soft tissues of varying composition by polarized Raman spectroscopy (PRS). Unlike most conventional microscopy methods, PRS leverages non-destructive, label-free sample preparation. PRS data from highly aligned muscle layers were utilized to derive a weighting function for aligned proteins via principal component analysis (PCA). This trained weighting function was used as a master loading function to calculate a principal component score (PC1 Score) as a function of polarized angle for tendon, dermis, hypodermis, and fabricated collagen gels. Since the PC1 Score calculated at arbitrary angles was insufficient to determine level of alignment, we developed an Amplitude Alignment Metric by fitting a sine function to PC1 Score with respect to polarized angle. We found that our PRS-based Amplitude Alignment Metric can be used as an indicator of level of protein alignment in soft tissues in a non-destructive manner with label-free preparation and has similar discriminatory capacity among isotropic and anisotropic samples compared to microscopy-based image processing method. This PRS method does not require a priori knowledge of sample orientation nor composition and appears insensitive to changes in protein composition among different tissues. The Amplitude Alignment Metric introduced here could enable convenient and adaptable evaluation of protein alignment in soft tissues of varying protein and cell composition. STATEMENT OF SIGNIFICANCE: Polarized Raman spectroscopy (PRS) has been used to characterize the of organization of soft tissues. However, most of the reported applications of PRS have been on collagen-rich tissues and reliant on intensities of collagen-related vibrations. This work describes a PRS method via a multivariate analysis to characterize alignment in soft tissues composed of varying proteins. Of note, the highly aligned muscle layer of mouse skin was used to train a master function then applied to other soft tissue samples, and the degree of anisotropy in the PRS response was evaluated to obtain the level of alignment in tissues. We have demonstrated that this method supports convenient and adaptable evaluation of protein alignment in soft tissues of varying protein and cell composition.

The transverse and longitudinal elastic constants of pulp fibers in paper sheets

Cellulose fibers are a major industrial input, but due to their irregular shape and anisotropic material response, accurate material characterization is difficult. Single fiber tensile testing is the most popular way to estimate the material properties of individual fibers. However, such tests can only be performed along the axis of the fiber and are associated with problems of enforcing restraints. Alternative indirect approaches, such as micro-mechanical modeling, can help but yield results that are not fully decoupled from the model assumptions. Here, we compare these methods with nanoindentation as a method to extract elastic material constants of the individual fibers. We show that both the longitudinal and the transverse elastic modulus can be determined, additionally enabling the measurement of fiber properties in-situ inside a sheet of paper such that the entire industrial process history is captured. The obtained longitudinal modulus is comparable to traditional methods for larger indents but with a strongly increased scatter as the size of the indentation is decreased further.

Altered collagen chemical compositional structure in osteopenic women with past fractures: A case-control Raman spectroscopic study

Incidences of low-trauma fractures among osteopenic women may be related to changes in bone quality. In this blinded, prospective-controlled study, compositional and heterogeneity contributors of bone quality to fracture risk were examined. We hypothesize that Raman spectroscopy can differentiate between osteopenic women with one or more fractures (cases) from women without fractures (controls). This study involved the Raman spectroscopic analysis of cortical and cancellous bone composition using iliac crest biopsies obtained from 59-cases and 59-controls, matched for age (62.0 ± 7.5 and 61.7 ± 7.3 years, respectively, p = 0.38) and hip bone mineral density (BMD, 0.827 ± 0.083 and 0.823 ± 0.072 g/cm3, respectively, p = 0.57). Based on aggregate univariate case-control and odds ratio based logistic regression analyses, we discovered two Raman ratiometric parameters that were predictive of past fracture risk. Specifically, 1244/1268 and 1044/959 cm-1 ratios, were identified as the most differential aspects of bone quality in cortical cases with odds ratios of 0.617 (0.406-0.938 95% CI, p = 0.024) and 1.656 (1.083-2.534 95% CI, p = 0.020), respectively. Both 1244/1268 and 1044/959 cm-1 ratios exhibited moderate sensitivity (59.3-64.4%) but low specificity (49.2-52.5%). These results suggest that the organization of mineralized collagen fibrils were significantly altered in cortical cases compared to controls. In contrast, compositional and heterogeneity parameters related to mineral/matrix ratios, B-type carbonate substitutions, and mineral crystallinity, were not significantly different between cases and controls. In conclusion, a key outcome of this study is the significant odds ratios obtained for two Raman parameters (1244/1268 and 1044/959 cm-1 ratios), which from a diagnostic perspective, may assist in the screening of osteopenic women with suspected low-trauma fractures. One important implication of these findings includes considering the possibility that changes in the organization of collagen compositional structure plays a far greater role in postmenopausal women with osteopenic fractures.

Microbial Identification, High-Resolution Microscopy and Spectrometry of the Rhizosphere in Its Native Spatial Context

During the past decades, several stand-alone and combinatorial methods have been developed to investigate the chemistry (i.e., mapping of elemental, isotopic, and molecular composition) and the role of microbes in soil and rhizosphere. However, none of these approaches are currently applicable to characterize soil-root-microbe interactions simultaneously in their spatial arrangement. Here we present a novel approach that allows for simultaneous microbial identification and chemical analysis of the rhizosphere at micro- to nano-meter spatial resolution. Our approach includes (i) a resin embedding and sectioning method suitable for simultaneous correlative characterization of Zea mays rhizosphere, (ii) an analytical work flow that allows up to six instruments/techniques to be used correlatively, and (iii) data and image correlation. Hydrophilic, immunohistochemistry compatible, low viscosity LR white resin was used to embed the rhizosphere sample. We employed waterjet cutting and avoided polishing the surface to prevent smearing of the sample surface at nanoscale. The quality of embedding was analyzed by Helium Ion Microscopy (HIM). Bacteria in the embedded soil were identified by Catalyzed Reporter Deposition-Fluorescence in situ Hybridization (CARD-FISH) to avoid interferences from high levels of autofluorescence emitted by soil particles and organic matter. Chemical mapping of the rhizosphere was done by Scanning Electron Microscopy (SEM) with Energy-dispersive X-ray analysis (SEM-EDX), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS), nano-focused Secondary Ion mass Spectrometry (nanoSIMS), and confocal Raman spectroscopy (μ-Raman). High-resolution correlative characterization by six different techniques followed by image registration shows that this method can meet the demanding requirements of multiple characterization techniques to identify spatial organization of bacteria and chemically map the rhizosphere. Finally, we presented individual and correlative workflows for imaging and image registration to analyze data. We hope this method will be a platform to combine various 2D analytics for an improved understanding of the rhizosphere processes and their ecological significance.

Combining polarized Raman spectroscopy and micropillar compression to study microscale structure-property relationships in mineralized tissues

Bone is a natural composite possessing outstanding mechanical properties combined with a lightweight design. The key feature contributing to this unusual combination of properties is the bone hierarchical organization ranging from the nano- to the macro-scale. Bone anisotropic mechanical properties from two orthogonal planes (along and perpendicular to the main bone axis) have already been widely studied. In this work, we demonstrate the dependence of the microscale compressive mechanical properties on the angle between loading direction and the mineralized collagen fibril orientation in the range between 0° and 82°. For this, we calibrated polarized Raman spectroscopy for quantitative collagen fibril orientation determination and validated the method using widely used techniques (small angle X-ray scattering, micro-computed tomography). We then performed compression tests on bovine cortical bone micropillars with known mineralized collagen fibril angles. A strong dependence of the compressive micromechanical properties of bone on the fibril orientation was found with a high degree of anisotropy for both the elastic modulus (E_a/E_t=3.80) and the yield stress (σ_a^y/σ_t^y=2.54). Moreover, the post-yield behavior was found to depend on the MCF orientation with a transition between softening to hardening behavior at approximately 50°. The combination of methods described in this work allows to reliably determine structure-property relationships of bone at the microscale, which may be used as a measure of bone quality.

Breaking new ground in mineralized tissue: Assessing tissue quality in clinical and laboratory studies

Mineralized tissues, such as bone and teeth, have extraordinary mechanical properties of both strength and toughness. This mechanical behavior originates from deformation and fracture resistance mechanisms in their multi-scale structure. The term quality describes the matrix composition, multi-scale structure, remodeling dynamics, water content, and micro-damage accumulation in the tissue. Aging and disease result in changes in the tissue quality that may reduce strength and toughness and lead to elevated fracture risk. Therefore, the capability to measure the quality of mineralized tissues provides critical information on disease progression and mechanical integrity. Here, we provide an overview of clinical and laboratory-based techniques to assess the quality of mineralized tissues in health and disease. Current techniques used in clinical settings include radiography-based (radiographs, dual energy x-ray absorptiometry, EOS) and x-ray tomography-based methods (high resolution peripheral quantitative computed tomography, cone beam computed tomography). In the laboratory, tissue quality can be investigated in ex vivo samples with x-ray imaging (micro and nano-computed tomography, x-ray microscopy), electron microscopy (scanning/transmission electron imaging (SEM/STEM), backscattered scanning electron microscopy, Focused Ion Beam-SEM), light microscopy, spectroscopy (Raman spectroscopy and Fourier transform infrared spectroscopy) and assessment of mechanical behavior (mechanical testing, fracture mechanics and reference point indentation). It is important for clinicians and basic science researchers to be aware of the techniques available in different types of research. While x-ray imaging techniques translated to the clinic have provided exceptional advancements in patient care, the future challenge will be to incorporate high-resolution laboratory-based bone quality measurements into clinical settings to broaden the depth of information available to clinicians during diagnostics, treatment and management of mineralized tissue pathologies.

Raman and Fourier transform infrared imaging for characterization of bone material properties

As the application of Raman spectroscopy to study bone has grown over the past decade, making it a peer technology to FTIR spectroscopy, it has become critical to understand their complimentary roles. Recent technological advancements have allowed these techniques to collect grids of spectra in a spatially resolved fashion to generate compositional images. The advantage of imaging with these techniques is that it allows the heterogenous bone tissue composition to be resolved and quantified. In this review we compare, for non-experts in the field of vibrational spectroscopy, the instrumentation and underlying physical principles of FTIR imaging (FTIRI) and Raman imaging. Additionally, we discuss the strengths and limitations of FTIR and Raman spectroscopy, address sample preparation, and discuss outcomes to provide researchers insight into which techniques are best suited for a given research question. We then briefly discuss previous applications of FTIRI and Raman imaging to characterize bone tissue composition and relationships of compositional outcomes with mechanical performance. Finally, we discuss emerging technical developments in FTIRI and Raman imaging which provide new opportunities to identify changes in bone tissue composition with disease, age, and drug treatment.

Raman microspectroscopic analysis of the tissue-specific composition of the human osteochondral junction in osteoarthritis: A pilot study

This study investigates the influence of osteoarthritis (OA) disease severity on the bio-composition of the osteochondral junction at the human tibial plateau using Raman microspectroscopy. We specifically aim to analyze the spatial composition of mineralized osteochondral tissues, i.e., calcified cartilage (CC) and subchondral bone plate (SBP) from unfixed, hydrated specimens. We hypothesize that the mineralization of CC and SBP decreases in advanced OA. Twenty-eight cylindrical osteochondral samples (d = 4 mm) from tibial plateaus of seven cadaveric donors were harvested and sorted into three groups following histopathological grading: healthy (n = 5), early OA (n = 8), and advanced OA (n = 15). Raman spectra were subjected to multivariate cluster analyses to identify different tissues. Finally, the tissue-specific composition was analyzed, and the impact of OA was statistically evaluated with linear mixed models. Cluster analyses of Raman spectra successfully distinguished CC and SBP as well as a tidemark region and uncalcified cartilage. CC was found to be more mineralized and the mineral was more crystalline compared with SBP. Both tissues exhibited similar compositional changes as a function of histopathological OA severity. In early OA, the mineralization tends to increase, and the mineral contains fewer carbonate substitutions. Compared with early OA, mineral crystals are rich in carbonate while the overall mineralization decreases in advanced OA. This Raman spectroscopic study advances the methodology for investigating the complex osteochondral junction from native tissue. The developed methodology can be used to elucidate detailed tissue-specific changes in the chemical composition with advancing OA. STATEMENT OF SIGNIFICANCE: In this study, Raman microspectroscopy was utilized to investigate the influence of osteoarthritic degeneration on the tissue-specific biochemical composition of the human osteochondral junction. Multivariate cluster analyses allowed us to characterize subtle compositional changes in the calcified cartilage and subchondral bone plate as well as in the tidemark region. The compositional differences found between the calcified cartilage and subchondral bone plate in both organic and mineral phases will serve as critical benchmark parameters when designing biomaterials for osteochondral repair. We found tissue-specific changes in the mineralization and carbonate substitution as a function of histopathological OA severity. Our developed methodology can be used to investigate the metabolic changes in the osteochondral junction associated with osteoarthritis.

Measuring the Microscopic Structures of Human Dental Enamel Can Predict Caries Experience

OBJECTIVES

The hierarchical structure of enamel gives insight on the properties of enamel and can influence its strength and ultimately caries experience. Currently, past caries experience is quantified using the decayed, missing, filled teeth/decayed, missing, filled surface (DMFT/DMFS for permanent teeth; dmft/dmfs for primary teeth), or international caries detection and assessment system (ICDAS) scores. By analyzing the structure of enamel, a new measurement can be utilized clinically to predict susceptibility to future caries experience based on a patient's individual's biomarkers. The purpose of this study was to test the hypothesis that number of prisms by square millimeter in enamel and average gap distance between prisms and interprismatic areas, influence caries experience through genetic variation of the genes involved in enamel formation.

MATERIALS AND METHODS

Scanning electron microscopy (SEM) images of enamel from primary teeth were used to measure (i) number of prisms by square millimeter and interprismatic spaces, (ii) prism density, and (iii) gap distances between prisms in the enamel samples. The measurements were tested to explore a genetic association with variants of selected genes and correlations with caries experience based on the individual's DMFT+ dmft score and enamel microhardness at baseline, after an artificial lesion was created and after the artificial lesion was treated with fluoride.

RESULTS

Associations were found between variants of genes including ameloblastin, amelogenin, enamelin, tuftelin, tuftelin interactive protein 11, beta defensin 1, matrix metallopeptidase 20 and enamel structure variables measured (number of prisms by square millimeter in enamel and average gap distance between prisms and interprismatic areas). Significant correlations were found between caries experience and microhardness and enamel structure. Negative correlations were found between number of prisms by square millimeter and high caries experience (r value= -0.71), gap distance between prisms and the enamel microhardness after an artificial lesion was created (r value= -0.70), and gap distance between prisms and the enamel microhardness after an artificial lesion was created and then treated with fluoride (r value= -0.81). There was a positive correlation between number of prisms by square millimeter and prism density of the enamel (r value = 0.82).

CONCLUSIONS

Our data support that genetic variation may impact enamel formation, and therefore influence susceptibility to dental caries and future caries experience.

CLINICAL RELEVANCE

The evaluation of enamel structure that may impact caries experience allows for hypothesizing that the identification of individuals at higher risk for dental caries and implementation of personalized preventative treatments may one day become a reality.

Investigation of changes in bone density and chemical composition associated with bone marrow oedema-type appearances in magnetic resonance images of the equine forelimb

Background

The aetiology of bone marrow oedema-like abnormalities (BMOA) seen on magnetic resonance imaging (MRI) is as yet not fully understood. The current study aimed to investigate the potential of projection radiography and Raman microspectroscopy to provide information regarding the underlying physiological changes associated with BMOA in equine bone samples.

Methods

MRI was used to assess 65 limbs from 43 horses. A subset of 13 limbs provided 25 samples, 8 with BMOA present and 17 as controls; these were examined with projection radiography to assess bone mineral density and Raman spectroscopy to assess bone composition. Statistical analysis was conducted using SPSS, the relationship between BMOA and age was tested using binary logistic regression, other outcome measures via unpaired t-tests.

Results

Overall BMOA was found to be associated with locally increased bone density (p = 0.011), suggesting increased bone formation; however, no measurable changes relating to bone remodelling were found, and there were no detectable changes in the chemical composition of bone.

Conclusions

BMOA is associated with locally increased bone density, without an associated change in the chemical composition of bone, suggesting this is not linked to BMOA. The presence of increased bone density associated with BMOA does appear to suggest that an increased amount of bone formation is occurring in these regions, but as Raman microspectroscopy data do not demonstrate any significant changes in bone chemical composition associated with BMOA, it would appear that the increased bone volume is due to a greater amount of bone being formed rather than an imbalance in relation to bone remodelling.

The study provides a proof of principle for the use of Raman microspectroscopy and projection radiography in in vitro studies of BMOA.

Electronic supplementary material

The online version of this article (10.1186/s12891-019-2693-y) contains supplementary material, which is available to authorized users.

Heterogeneous bioapatite carbonation in western painted turtles is unchanged after anoxia

Adsorbed and structurally incorporated carbonate in bioapatite, the primary mineral phase of bone, is observed across vertebrates, typically at 2-8 wt%, and supports critical physiological and biochemical functions. Several turtle species contain elevated bone-associated carbonate, a property linked to pH buffering and overwintering survival. Prior studies of turtle bone utilized bulk analyses, which do not provide spatial resolution of carbonate. Using Raman spectroscopy, the goals of this study were to: (1) quantify and spatially resolve carbonate heterogeneity within the turtle shell; (2) determine if cortical and trabecular bone contain distinct carbonate concentrations; and (3) assess if simulated overwintering conditions result in decreased bioapatite carbonation. Here, we demonstrate the potential for Raman spectroscopic analysis to spatially resolve bioapatite carbonation, using the western painted turtle as a model species. Carbonate concentration was highly variable within cortical and trabecular bone, based on calibrated Raman spot analyses and mapping, suggesting heterogeneous carbonate distribution among crystallites. Mean carbonate concentration did not significantly differ between cortical and trabecular bone, which indicates random distribution of crystallites with elevated and depleted carbonate. Carbonate concentrations (range: 5-22 wt%) were not significantly different in overwintering and control animals, deviating from previous bulk analyses. In reconciling bulk and Raman analyses, two hypotheses explain how overwintering turtles potentially access carbonate: (1) mobilization of mineral-associated, surface components of bone crystallites; and (2) selective, dispersed crystallite dissolution. Elevated bioapatite carbonate in the western painted turtle, averaging 11.8 wt%, represents the highest carbonation observed in vertebrates, and is one physiological trait that facilitates overwintering survival.

Raman Microscopy and Bone

Raman microscopy is a nondestructive technique requiring minimal sample preparation that can be used to measure the chemical properties of the mineral and collagen parts of bone simultaneously. Modern Raman instruments contain the necessary components and software to acquire the standard information required in most bone studies. The spatial resolution of the technique is about a micron. As it is nondestructive and small samples can be used, it forms a useful part of a bone characterization toolbox.

Unraveling the compromised biomechanical performance of type 2 diabetes- and Roux-en-Y gastric bypass bone by linking mechanical-structural and physico-chemical properties

Type 2 diabetes mellitus (T2DM) is a metabolic disorder associated with obesity and hyperglycemia. Roux-en-Y gastric bypass (RYGB) surgery is a common treatment for severely obese patients and T2DM. Both RYGB and T2DM are linked to increased skeletal fragility, though the exact mechanisms are poorly understood. Our aim was to characterize the structural, mechanical and compositional properties of bones from diet-induced obese and RYGB-treated obese (bypass) mice to elucidate which the exact factors are contributing to the increased skeletal fragility. To achieve this, a combinatory approach including microfocus X-ray computed tomography, 3-point bending, finite element modeling and Raman spectroscopy, was used. Compared to aged-matched lean controls, the obese mice displayed decreased cortical thickness, trabecular bone loss, decreased stiffness and increased Young’s modulus. For the bypass mice, these alterations were even more pronounced, and additionally they showed low mineral-to-matrix ratio in the cortical endosteal area. Accumulation of the advanced glycation end-product (AGE) pentosidine was found in the cortex of obese and bypass groups and this accumulation was correlated with an increased Young’s modulus. In conclusion, we found that the increased fracture risk in T2DM- and post-RYGB bones is mainly driven by accumulation of AGEs and macro-structural alterations, generating biomechanical dysfunctionality.

Quick and easy sample preparation without resin embedding for the bone quality assessment of fresh calcified bone using fourier transform infrared imaging

Fourier transform infrared (FTIR) imaging is a powerful tool for the assessment of bone quality; however, it requires the preparation of thin bone sections. Conventional poly(methyl methacrylate) (PMMA) embedding for the preparation of sections takes more than two weeks and causes denaturation of the bone. Development of a quick and easy sample preparation technique without denaturation is needed for accurate clinical evaluation of fresh calcified bone using FTIR imaging. Frozen sectioning allows the quick and easy preparation of thin sections without denaturation, but it requires a substrate with good chemical resistance and improved heat shock resistance. Polypropylene (PP) film afforded both good chemical resistance and greater heat shock resistance, and the 4-μm-thick PP film coated with glue was thin enough for the IR beam to pass through it, while the optical anisotropy of infrared bands overlapping with PO₄^3- band was negligible. The bone quality of femoral thin sections prepared by the conventional PMMA embedding and sectioning procedure (RESIN-S) or the newly developed frozen sectioning procedure (FROZEN-S) was evaluated by FTIR imaging. The mineral-to-matrix ratio and crystallinity in the RESIN-S sections were higher than those in the FROZEN-S sections, whereas the carbonate-to-phosphate ratio in the RESIN-S sections was lower than that in the FROZEN-S sections. In RESIN-S, the increased mineral-to-matrix ratio could be caused by dehydration, and the increased crystallinity and decreased carbonate-to-phosphate ratio might be consequence of dissolution of bone mineral during PMMA embedding. Therefore, the combined use of PP film coated with glue and the frozen sectioning procedure without denaturation appears well suited to the assessment of the bone quality of fresh calcified bone using FTIR imaging.

Raman and Fourier Transform Infrared (FT-IR) Mineral to Matrix Ratios Correlate with Physical Chemical Properties of Model Compounds and Native Bone Tissue

Raman and Fourier transform infrared (FT-IR) spectroscopic imaging techniques can be used to characterize bone composition. In this study, our objective was to validate the Raman mineral:matrix ratios (ν₁ PO₄:amide III, ν₁ PO₄:amide I, ν₁ PO₄:Proline + hydroxyproline, ν₁ PO₄:Phenylalanine, ν₁ PO₄:δ CH₂ peak area ratios) by correlating them to ash fraction and the IR mineral:matrix ratio (ν₃ PO₄:amide I peak area ratio) in chemical standards and native bone tissue. Chemical standards consisting of varying ratios of synthetic hydroxyapatite (HA) and collagen, as well as bone tissue from humans, sheep, and mice, were characterized with confocal Raman spectroscopy and FT-IR spectroscopy and gravimetric analysis. Raman and IR mineral:matrix ratio values from chemical standards increased reciprocally with ash fraction (Raman ν₁ PO₄/Amide III: P < 0.01, R²= 0.966; Raman ν₁ PO₄/Amide I: P < 0.01, R²= 0.919; Raman ν₁ PO₄/Proline + Hydroxyproline: P < 0.01, R²= 0.976; Raman ν₁ PO₄/Phenylalanine: P < 0.01, R²= 0.911; Raman ν₁ PO₄/δ CH₂: P < 0.01, R²= 0.894; IR P < 0.01, R²= 0.91). Fourier transform infrared mineral:matrix ratio values from native bone tissue were also similar to theoretical mineral:matrix ratio values for a given ash fraction. Raman and IR mineral:matrix ratio values were strongly correlated ( P < 0.01, R²= 0.82). These results were confirmed by calculating the mineral:matrix ratio for theoretical IR spectra, developed by applying the Beer-Lambert law to calculate the relative extinction coefficients of HA and collagen over the same range of wavenumbers (800-1800 cm^-1). The results confirm that the Raman mineral:matrix bone composition parameter correlates strongly to ash fraction and to its IR counterpart. Finally, the mineral:matrix ratio values of the native bone tissue are similar to those of both chemical standards and theoretical values, confirming the biological relevance of the chemical standards and the characterization techniques.

Vibrational spectroscopic techniques to assess bone quality

Although musculoskeletal diseases such as osteoporosis are diagnosed and treatment outcome is evaluated based mainly on routine clinical outcomes of bone mineral density (BMD) by DXA and biochemical markers, it is recognized that these two indicators, as valuable as they have proven to be in the everyday clinical practice, do not fully account for manifested bone strength. Thus, the term bone quality was introduced, to complement considerations based on bone turnover rates and BMD. Bone quality is an "umbrella" term that incorporates the structural and material/compositional characteristics of bone tissue. Vibrational spectroscopic techniques such as Fourier transform infrared microspectroscopy (FTIRM) and imaging (FTIRI), and Raman spectroscopy, are suitable analytical tools for the determination of bone quality as they provide simultaneous, quantitative, and qualitative information on all main bone tissue components (mineral, organic matrix, tissue water), in a spatially resolved manner. Moreover, the results of such analyses may be readily combined with the outcomes of other techniques such as histology/histomorphometry, small angle X-ray scattering, quantitative backscattered electron imaging, and nanoindentation.

Correlation between micro-hardness and mineral content in healthy human enamel

BACKGROUND

Enamel is the hardest and the stiffest tissue in the human body. The enamel undergoes multidirectional stresses, withstands multimillion chewing cycles, all while protecting the internal dentin and pulp from damage due to mechanical overload and exposure to the harsh chemical environment of the mouth. Raman spectroscopy allows to study enamel mineral content in a non-destructive and site-specific way. While Raman spectroscopy has been applied in other studies to assess tooth mineralization, there are no studies that examine the relationship between micro-hardness and mineral content of the untreated enamel. An understanding of this relationship is extremely important in a clinical context. The effect of various agents on enamel hardness was investigated, though the relationship between healthy enamel mineral content and micro-hardness remains obscure.

MATERIAL AND METHODS

Twenty human incisor teeth were obtained in compliance with the NIH guidelines and imaged site-specifically with a Raman microscope and evaluated with a Brinell hardness measurement device. The front portion of each tooth was divided into apical, medium and cervical regions and subsequently imaged with a Raman microscope in these three locations.

RESULTS AND CONCLUSIONS

The results demonstrated that enamel mineral content varies significantly between individuals and is correlated with the hardness of the enamel. Non-invasive, sample preparation free Raman spectroscopy was successfully employed to measure the mineral content of healthy enamel and it correlated the mineralization score to the hardness measurements of the selected cervical location. The overall level of enamel mineral content may serve as a robust predictor of patients' susceptibility to developing caries, and overall enamels wear resistance, thus allowing for the prevention of caries via clinically available methods of remineralization, fluoride treatment and frequent cleaning. Key words:Enamel, raman spectroscopy, micro-hardness, extracted teeth.

Even with rehydration, preservation in ethanol influences the mechanical properties of bone and how bone responds to experimental manipulation

Typically, bones are harvested at the time of animal euthanasia and stored until mechanical testing. However, storage methods are not standardized, and differential effects on mechanical properties are possible between methods. The goal of this study was to investigate the effects that two common preservation methods (freezing wrapped in saline-soaked gauze and refrigerating ethanol fixed samples) have on bone mechanical properties in the context of an in vitro ribosylation treatment designed to modify mechanical integrity. It was hypothesized that there would be an interactive effect between ribose treatment and preservation method. Tibiae from twenty five 11week old female C57BL/6 mice were separated into 2 preservation groups. Micro-CT scans of contralateral pairs assessed differences in geometry prior to storage. After 7weeks of storage, bones in each pair of tibiae were soaked in a solution containing either 0M or 0.6M ribose for 1week prior to 4 point bending tests. There were no differences in any cortical geometric parameters between contralateral tibiae. There was a significant main effect of ethanol fixation on displacement to yield (-16.3%), stiffness (+24.5%), strain to yield (-13.9%), and elastic modulus (+18.5%) relative to frozen specimens. There was a significant main effect of ribose treatment for yield force (+13.9%), ultimate force (+9.2%), work to yield (+22.2%), yield stress (+14.1%), and resilience (+21.9%) relative to control-soaked bones. Postyield displacement, total displacement, postyield work, total work, total strain, and toughness were analyzed separately within each preservation method due to significant interactions. For samples stored frozen, all six properties were lower in the ribose-soaked group (49%-68%) while no significant effects of ribose were observed in ethanol fixed bones. Storage in ethanol likely caused changes to the collagen matrix which prevented or masked the embrittling effects of ribosylation that were seen in samples stored frozen wrapped in saline-soaked gauze. These data illustrate the clear importance of maintaining hydration if the eventual goal is to use bones for mechanical assessments and further show that storage in ethanol can alter potential to detect effects of experimental manipulation (in this case ribosylation).

Evaluation of mineral content in healthy permanent human enamel by Raman spectroscopy

Background

An understanding of tooth enamel mineral content using a clinically viable method is essential since variations in mineralization may serve as an early precursor of a dental health issues, and may predict progression and architecture of decay in addition to assessing the success and effectiveness of the remineralization strategies.

Material and Methods

Twenty two human incisor teeth were obtained in compliance with the NIH guidelines and site specifically imaged with Raman microscope. The front portion of the teeth was divided into apical, medium and cervical regions and subsequently imaged with Raman microscope in these three locations.

Results

Measured mineralization levels have varied substantially depending on the regions. It was also observed that, the cervical enamel is the least mineralization as a populational average.

Conclusions

Enamel mineralization is affected by a many factors such as are poor oral hygiene, alcohol consumption and high intake of dietary carbohydrates, however the net effect manifests as overall mineral content of the enamel. Thus an early identification of the individual with overall low mineral content of the enamel may be a valuable screening tool in determining a group with much higher than average caries risk, allowing intervention before development of caries. Clinically applicable non-invasive techniques that can quantify mineral content, such as Raman analysis, would help answer whether or not mineralization is associated with caries risk.

Key words:Enamel, Raman spectroscopy, mineral content, dental caries.

Bone apatite composition of necrotic trabecular bone in the femoral head of immature piglets

Ischemic osteonecrosis of the femoral head (IOFH) can lead to excessive resorption of the trabecular bone and collapse of the femoral head as a structure. A well-known mineral component to trabecular bone is hydroxyapatite, which can be present in many forms due to ionic substitution, thus altering chemical composition. Unfortunately, very little is known about the chemical changes to bone apatite following IOFH. We hypothesized that the apatite composition changes in necrotic bone possibly contribute to increased osteoclast resorption and structural collapse of the femoral head. The purpose of this study was to assess the macroscopic and local phosphate composition of actively resorbed necrotic trabecular bone to isolate differences between areas of increased osteoclast resorption and normal bone formation. A piglet model of IOFH was used. Scanning electron microscopy (SEM), histology, X-ray absorbance near edge structure (XANES), and Raman spectroscopy were performed on femoral heads to characterize normal and necrotic trabecular bone. Backscattered SEM, micro-computed tomography and histology showed deformity and active resorption of necrotic bone compared to normal. XANES and Raman spectroscopy obtained from actively resorbed necrotic bone and normal bone showed increased carbonate-to-phosphate content in the necrotic bone. The changes in the apatite composition due to carbonate substitution may play a role in the increased resorption of necrotic bone due to its increase in solubility. Indeed, a better understanding of the apatite composition of necrotic bone could shed light on osteoclast activity and potentially improve therapeutic treatments that target excessive resorption of bone.

Chemical fixation methods for Raman spectroscopy-based analysis of bacteria

Preservation of biological samples for downstream analysis is important for analytical methods that measure the biochemical composition of a sample. One such method, Raman microspectroscopy, is commonly used as a rapid phenotypic technique to measure biomolecular composition for the purposes of identification and discrimination of species and strains of bacteria, as well as investigating physiological responses to external stressors and the uptake of stable isotope-labelled substrates in single cells. This study examines the influence of a number of common chemical fixation and inactivation methods on the Raman spectrum of six species of bacteria. Modifications to the Raman-phenotype caused by fixation were compared to unfixed control samples using difference spectra and Principal Components Analysis (PCA). Additionally, the effect of fixation on the ability to accurately classify bacterial species using their Raman phenotype was determined. The results showed that common fixatives such as glutaraldehyde and ethanol cause significant changes to the Raman spectra of bacteria, whereas formaldehyde and sodium azide were better at preserving spectral features.

Effects of tissue fixation on coherent anti-Stokes Raman scattering images of brain

Coherent anti-Stokes Raman scattering (CARS) microscopy is an emerging multiphoton technique for the label-free histopathology of the central nervous system, by imaging the lipid content within the tissue. In order to apply the technique on standard histology sections, it is important to know the effects of tissue fixation on the CARS image. Here, we report the effects of two common fixation methods, namely with formalin and methanol-acetone, on mouse brain and human glioblastoma tissue. The variations induced by fixation on the CARS contrast and intensity were compared and interpreted using Raman microspectroscopy. The results show that, whenever unfixed cryosections cannot be used, fixation with formalin constitutes an alternative which does not deteriorate substantially the contrast generated by the different brain structures in the CARS image. Fixation with methanol-acetone strongly modifies the tissue lipid content and is therefore incompatible with the CARS imaging.

Assessment of lamellar level properties in mouse bone utilizing a novel spherical nanoindentation data analysis method

In this work, we demonstrate the viability of using our recently developed data analysis procedures for spherical nanoindentation in conjunction with Raman spectroscopy for studying lamellar-level correlations between the local composition and local mechanical properties in mouse bone. Our methodologies allow us to convert the raw load-displacement datasets to much more meaningful indentation stress-strain curves that accurately capture the loading and unloading elastic moduli, the indentation yield points, as well as the post-yield characteristics in the tested samples. Using samples of two different inbred mouse strains, A/J and C57BL/6J (B6), we successfully demonstrate the correlations between the mechanical information obtained from spherical nanoindentation measurements to the local composition measured using Raman spectroscopy. In particular, we observe that a higher mineral-to-matrix ratio correlated well with a higher local modulus and yield strength in all samples. Thus, new bone regions exhibited lower moduli and yield strengths compared to more mature bone. The B6 mice were also found to exhibit lower modulus and yield strength values compared to the more mineralized A/J strain.

Raman microscopy of bone

Raman microscopy is a non-destructive technique requiring minimal sample preparation that can be used to measure the chemical properties of the mineral and collagen parts of bone simultaneously. Modern Raman instruments contain the necessary components and software to acquire the standard information required in most bone studies. The spatial resolution of the technique is about a micron. As it is non-destructive and small samples can be used, it forms a useful part of a bone characterisation toolbox.

The ratio 1660/1690 cm(-1) measured by infrared microspectroscopy is not specific of enzymatic collagen cross-links in bone tissue

In postmenopausal osteoporosis, an impairment in enzymatic cross-links (ECL) occurs, leading in part to a decline in bone biomechanical properties. Biochemical methods by high performance liquid chromatography (HPLC) are currently used to measure ECL. Another method has been proposed, by Fourier Transform InfraRed Imaging (FTIRI), to measure a mature PYD/immature DHLNL cross-links ratio, using the 1660/1690 cm⁻¹ area ratio in the amide I band. However, in bone, the amide I band composition is complex (collagens, non-collagenous proteins, water vibrations) and the 1660/1690 cm⁻¹ by FTIRI has never been directly correlated with the PYD/DHLNL by HPLC. A study design using lathyritic rats, characterized by a decrease in the formation of ECL due to the inhibition of lysyl oxidase, was used in order to determine the evolution of 1660/1690 cm⁻¹ by FTIR Microspectroscopy in bone tissue and compare to the ECL quantified by HPLC. The actual amount of ECL was quantified by HPLC on cortical bone from control and lathyritic rats. The lathyritic group exhibited a decrease of 78% of pyridinoline content compared to the control group. The 1660/1690 cm⁻¹ area ratio was increased within center bone compared to inner bone, and this was also correlated with an increase in both mineral maturity and mineralization index. However, no difference in the 1660/1690 cm⁻¹ ratio was found between control and lathyritic rats. Those results were confirmed by principal component analysis performed on multispectral infrared images. In bovine bone, in which PYD was physically destructed by UV-photolysis, the PYD/DHLNL (measured by HPLC) was strongly decreased, whereas the 1660/1690 cm⁻¹ was unmodified. In conclusion, the 1660/1690 cm⁻¹ is not related to the PYD/DHLNL ratio, but increased with age of bone mineral, suggesting that a modification of this ratio could be mainly due to a modification of the collagen secondary structure related to the mineralization process.

Compressive behaviour of child and adult cortical bone

In this study, cortical bone tissue from children was investigated. It is extremely difficult to obtain human child tissue. Therefore, the only possibility was to use bone tissue, free from any lesion, collected from young bone cancer patients. The compressive mechanical behaviour of child bone tissue was compared to the behaviour of adult tissue. Moreover, two hypotheses were tested: 1) that the mechanical behaviour of both groups is correlated to ash density; 2) that yield strain is an invariant. Small parts of the diaphysis of femora or tibiae from 12 children (4-15 years) and 12 adults (22-61 years) were collected. Cylindrical specimens were extracted from the cortical wall along the longitudinal axis of the diaphysis. A total of 107 specimens underwent compressive testing (strain rate: 0.1 s(-1)). Only the specimens showing a regular load-displacement curve (94) were considered valid and thereafter reduced to ash. It was found that the child bone tissue had significant lower compressive Young's modulus (-34%), yield stress (-38%), ultimate stress (-33%) and ash density (-17%) than the adult tissue. Conversely, higher compressive ultimate strain was found in the child group (+24%). Despite specimens extracted from both children and adults, ash density largely described the variation in tissue strength and stiffness (R(2)=in the range of 0.86-0.91). Furthermore, yield strain seemed to be roughly an invariant to subject age and tissue density. These results confirm that the mechanical properties of child cortical bone tissue are different from that of adult tissue. However, such differences are correlated to differences in tissue ash density. In fact, ash density was found to be a good predictor of strength and stiffness, also for cortical bone collected from children. Finally, the present findings support the hypothesis that compressive yield strain is an invariant.

Measuring differences in compositional properties of bone tissue by confocal Raman spectroscopy

The full range of fracture risk determinants arise from each hierarchical level comprising the organization of bone. Raman spectroscopy is one tool capable of characterizing the collagen and mineral phases at a near submicron-length scale, but the ability of Raman spectra to distinguish compositional differences of bone is not well defined. Therefore, we analyzed multiple Raman peak intensities and peak ratios to characterize their ability to distinguish between the typically less mineralized osteonal tissue and the more mineralized interstitial tissue in intracortical human bone. To further assess origins of variance, we collected Raman spectra from embedded specimens and for two orientations of cut. Per specimen, Raman peak intensities or ratios were averaged among multiple sites within five osteons and five neighboring interstitial tissue. The peak ratios of ν(1) phosphate (PO(4)) to proline or amide III detected the highest increases of 15.4 or 12.5%, respectively, in composition from osteonal to interstitial tissue. The coefficient of variance was less than 5% for each as opposed to a value of ~8% for the traditional ν(1)PO(4)/amide I, a peak ratio that varied the most between transverse and longitudinal cuts for each tissue type. Although embedding affected Raman peaks, it did not obscure differences in most peak ratios related to mineralization between the two tissue types. In studies with limited sample size but sufficient number of Raman spectra per specimen for spatial averaging, ν(1)PO(4)/amide III or ν(1)PO(4)/proline is the Raman property that is most likely to detect a compositional difference between experimental groups.

Raman assessment of bone quality

BACKGROUND

Progress in the diagnosis and prediction of fragility fractures depends on improvements to the understating of the compositional contributors of bone quality to mechanical competence. Raman spectroscopy has been used to evaluate alterations to bone composition associated with aging, disease, or injury.

QUESTIONS/PURPOSES

In this survey we will (1) review the use of Raman-based compositional measures of bone quality, including mineral-to-matrix ratio, carbonate-to-phosphate ratio, collagen quality, and crystallinity; (2) review literature correlating Raman spectra with biomechanical and other physiochemical measurements and with bone health; and (3) discuss prospects for ex vivo and in vivo human subject measurements.

METHODS

ISI Web of Science was searched for references to bone Raman spectroscopy in peer-reviewed journals. Papers from other topics have been excluded from this review, including those on pharmaceutical topics, dental tissue, tissue engineering, stem cells, and implant integration.

RESULTS

Raman spectra have been reported for human and animal bone as a function of age, biomechanical status, pathology, and other quality parameters. Current literature supports the use of mineral-to-matrix ratio, carbonate-to-phosphate ratio, and mineral crystallinity as measures of bone quality. Discrepancies between reports arise from the use of band intensity ratios rather than true composition ratios, primarily as a result of differing collagen band selections.

CONCLUSIONS

Raman spectroscopy shows promise for evaluating the compositional contributors of bone quality in ex vivo specimens, although further validation is still needed. Methodology for noninvasive in vivo assessments is still under development.

Repeated freeze-thawing of bone tissue affects Raman bone quality measurements

The ability to probe fresh tissue is a key feature to biomedical Raman spectroscopy. However, it is unclear how Raman spectra of calcified tissues are affected by freezing. In this study, six transverse sections of femoral cortical bone were subjected to multiple freeze∕thaw cycles and probed using a custom Raman microscope. Significant decreases were observed in the amide I and amide III bands starting after two freeze thaw cycles. Raman band intensities arising from proline residues of frozen tissue appeared consistent with fresh tissue after four cycles. Crystallinity values of bone mineral diminished slightly with freezing and were noticeable after only one freezing. Mineral carbonate levels did not deviate significantly with freezing and thawing. The authors recommend freezing and thawing bone tissue only once to maintain accurate results.

Raman and mechanical properties correlate at whole bone- and tissue-levels in a genetic mouse model

The fracture resistance of bone arises from the composition, orientation, and distribution of the primary constituents at each hierarchical level of organization. Therefore, to establish the relevance of Raman spectroscopy (RS) in identifying differences between strong or tough bone and weak or brittle bone, we investigated whether Raman-derived properties could explain the variance in biomechanical properties at both the whole bone and the tissue-level, and do so independently of traditional measurements of mineralization. We harvested femurs from wild-type mice and mice lacking matrix metalloproteinase 2 because the mutant mice have a known reduction in mineralization. Next, RS quantified compositional properties directly from the intact diaphysis followed by micro-computed tomography to quantify mineralization density (Ct.TMD). Correlations were then tested for significance between these properties and the biomechanical properties as determined by the three-point bending test on the same femurs. Harvested tibia were embedded in plastic, sectioned transversely, and polished in order to acquire average Raman properties per specimen that were then correlated with average nanoindentation properties per specimen. Dividing the ν(1) phosphate by the proline peak intensity provided the strongest correlation between the mineral-to-collagen ratio and the biomechanical properties (whole bone modulus, strength, and post-yield deflection plus nanoindentation modulus). Moreover, the linear combination of ν(1) phosphate/proline and Ct.TMD provided the best explanation of the variance in strength between the genotypes, and it alone was the best explanatory variable for brittleness. Causal relationships between Raman and fracture resistance need to be investigated, but Raman has the potential to assess fracture risk.

The effect of cell fixation on the discrimination of normal and leukemia cells with laser tweezers Raman spectroscopy

Laser tweezers Raman spectroscopy (LTRS) was used to characterize the effect of different chemical fixation procedures on the Raman spectra of normal and leukemia cells. Individual unfixed, paraformaldehyde-fixed, and methanol-fixed normal and transformed lymphocytes from three different cell lines were analyzed with LTRS. When compared to the spectra of unfixed cells, the fixed cell spectra show clear, reproducible changes in the intensity of specific Raman markers commonly assigned to DNA, RNA, protein, and lipid vibrations (e.g. 785, 1230, 1305, 1660 cm(-1)) in mammalian cells, many of which are important markers that have been used to discriminate between normal and cancer lymphocytes. Statistical analyses of the Raman data and classification using principal component analysis and linear discriminant analysis indicate that methanol fixation induces a greater change in the Raman spectra than paraformaldehyde. In addition, we demonstrate that the spectral changes as a result of the fixation process have an adverse effect on the accurate Raman discrimination of the normal and cancer cells. The spectral artifacts created by the use of fixatives indicate that the method of cell preparation is an important parameter to consider when applying Raman spectroscopy to characterize, image, or differentiate between different fixed cell samples to avoid potential misinterpretation of the data.

Transcutaneous fiber optic Raman spectroscopy of bone using annular illumination and a circular array of collection fibers

Transcutaneous bone Raman spectroscopy with an exciting annulus of 785-nm laser light surrounding the field of view of a circular array of collection fibers is demonstrated. The configuration provides distributed laser light. The annulus is located 2 to 3 mm beyond the edge of the field of view of the collection fibers to reject contributions from skin and other overlying tissues. Data are presented for rat and chicken tissue. For rat tibia, the carbonate/phosphate ratio measured at a depth of 1 mm below the skin is in error by 2.3% at an integration time of 120 s and within 10% at a 30-s integration time. For chicken tibia 4 mm below the skin surface, the error is less than 8% with a 120-s integration time.