Synthesis of optically pure ethyl (S)-4-chloro-3-hydroxybutanoate by Escherichia coli transformant cells coexpressing the carbonyl reductase and glucose dehydrogenase genes

Recent Advances in the Synthesis and Analysis of Atorvastatin and its Intermediates

Atorvastatin, a lipid-lowering drug that is widely used in the treatment of cardiovascular diseases, has significant clinical significance. This article focuses on the synthetic procedures of atorvastatin, including Paal-Knorr synthesis and several new synthetic strategies. It also outlines chemical and chemo-enzymatic methods for synthesizing optically active side chain of atorvastatin. In addition, a comprehensive overview of the analytical monitoring techniques for atorvastatin and its metabolites and impurities is reported, alongside a discussion of their strengths and limitations.

Coevolving stability and activity of LsCR by a single point mutation and constructing neat substrate bioreaction system

Carbonyl reductase (CR)-catalyzed bioreduction in the organic phase and the neat substrate reaction system is a lasting challenge, placing higher requirements on the performance of enzymes. Protein engineering is an effective method to enhance the properties of enzymes for industrial applications. In the present work, a single point mutation E145A on our previously constructed CR mutant LsCR_M3 , coevolved thermostability, and activity. Compared with LsCR_M3 , the catalytic efficiency k_cat /K_M of LsCR_M3 -E145A (LsCR_M4 ) was increased from 6.6 to 21.9 s^-1  mM^-1 . Moreover, E145A prolonged the half-life t_1/2 at 40°C from 4.1 to 117 h, T m ${T}_{m}$ was increased by 5°C, T 50 30 ${T}_{50}^{30}$ was increased by 14.6°C, and T_opt was increased by 15°C. Only 1 g/L of lyophilized Escherichia coli cells expressing LsCR_M4 completely reduced up to 600 g/L 2-chloro-1-(3,4-difluorophenyl)ethanone (CFPO) within 13 h at 45°C, yielding the corresponding (1S)-2-chloro-1-(3,4-difluorophenyl)ethanol ((S)-CFPL) in 99.5% ee_P , with a space-time yield of 1.0 kg/L d, the substrate to catalyst ratios (S/C) of 600 g/g. Compared with LsCR_M3 , the substrate loading was increased by 50%, with the S/C increased by 14 times. Compared with LsCR_WT , the substrate loading was increased by 6.5 times. In contrast, LsCR_M4 completely converted 600 g/L CFPO within 12 h in the neat substrate bioreaction system.

Efficient production of an ezetimibe intermediate using carbonyl reductase coupled with glucose dehydrogenase

Ezetimibe is a top-selling hypolipidemic drug for the treatment of cardiovascular diseases. Biosynthesis of (4S)-3-[(5S)-5-(4-fluorophenyl)-5-hydroxypentanoyl]-4-phenyl-1,3-oxazolidin-2-one ((S)-ET-5) using carbonyl reductase has shown advantages including high catalytic efficiency, excellent stereoselectivity, mild reaction conditions, and environmental friendness, and was considered as the key step for ezetimibe production. The regeneration efficiency of the cofactor, nicotinamide adenine dinucleotide (phosphate) (NAD(P)H) is one of the main restricted factor. Recombinant Escherichia coli strain (smCR125) coexpressing carbonyl reductase (CR125) and glucose dehydrogenase were successfully constructed and applied for the production of (S)-ET-5 for the first time. Without extra addition of the coenzyme NADPH, the yield of 99.8% and the enantiomeric excess (e.e.) of 99.9% were achieved under ET-4 concentration of 200 g/L. Using a substrate fed-batch strategy, under the optimal conditions, the substrate ET-4 concentration was increased to 250 g/L with the yield of 98.9% and the e.e. of 99.9% after 12 hr reaction. The space-time yield of 494.5 g L^-1 d^-1 and the space-time yield per gram biocatalyst of 24.7 g L^-1 d^-1 g^-1 DCW were achieved, which were higher than ever reported for the biosynthesis of the ezetimibe intermediate.

Impact and relevance of alcohol dehydrogenase enantioselectivities on biotechnological applications

Alcohol dehydrogenases (ADHs) catalyze the reversible reduction of a carbonyl group to its corresponding alcohol. ADHs are widely employed for organic synthesis due to their lack of harm to the environment, broad substrate acceptance, and high enantioselectivity. This review focuses on the impact and relevance of ADH enantioselectivities on their biotechnological application. Stereoselective ADHs are beneficial to reduce challenging ketones such as ketones owning two bulky substituents or similar-sized substituents to the carbonyl carbon. Meanwhile, in cascade reactions, non-stereoselective ADHs can be utilized for the quantitative oxidation of racemic alcohol to ketone and dynamic kinetic resolution.

Biocatalytic dynamic kinetic reductive resolution with ketoreductase from Klebsiella pneumoniae: the asymmetric synthesis of functionalized tetrahydropyrans

Ketoreductase from growing cells of Klebsiella pneumoniae (NBRC 3319) acts as an efficient reagent for converting racemic α-benzyl/cinnamyl substituted-β-ketoesters to the corresponding β-hydroxy esters with excellent yields and stereoselectivities (ee and de >99 %). The reactions described herein followed a biocatalytic dynamic kinetic reductive resolution (DKRR) pathway, which is reported for the first time with such substrates. It was found that the enzyme system can accept substituted mono-aryl rings with different electronic natures. In addition, it also accepts a substituted naphthyl ring and heteroaryl ring in the α-position of the parent β-ketoester. The synthesized enantiopure β-hydroxy esters were then synthetically manipulated to valuable tetrahydropyran building blocks.

Broadening the Scope of Biocatalysis in Sustainable Organic Synthesis

This Review is aimed at synthetic organic chemists who may be familiar with organometallic catalysis but have no experience with biocatalysis, and seeks to provide an answer to the perennial question: if it is so attractive, why wasn't it extensively used in the past? The development of biocatalysis in industrial organic synthesis is traced from the middle of the last century. Advances in molecular biology in the last two decades, in particular genome sequencing, gene synthesis and directed evolution of proteins, have enabled remarkable improvements in scope and substantially reduced biocatalyst development times and cost contributions. Additionally, improvements in biocatalyst recovery and reuse have been facilitated by developments in enzyme immobilization technologies. Biocatalysis has become eminently competitive with chemocatalysis and the biocatalytic production of important pharmaceutical intermediates, such as enantiopure alcohols and amines, has become mainstream organic synthesis. The synthetic space of biocatalysis has significantly expanded and is currently being extended even further to include new-to-nature biocatalytic reactions.

Full-time dynamics of batch-wise enzymatic cycling system composed of two kinds of dehydrogenase mediated by NAD(P)H for mass production of chiral hydroxyl compounds

Enzymatic cycling system (coupled dehydrogenase-catalyzed biosystem being composed of two elementary enzymatic reactions mediated by NAD(P)H + NAD(P)⁺) is industrially attractive for reducing prochiral carbonyl compounds to the corresponding chiral hydroxyl compounds. The reaction rate equation of the batch-wise biosystem was generally derived by ordered Bi Bi mechanism of two-substrate enzyme reaction on several reasonable assumptions. The rate equations of the batch-wise biosystem was generalized by transforming them into the dimensionless forms. The dimensionless forms were solved numerically. It was revealed that the batch-wise biosystem was generally made up of unique 3 phases, i.e., phases I, II and III. Phase I was very short transient so that the biosystem entered rapidly phase II. In phase II the consumption rate dynamically balanced with its formation rate so that the concentration of NAD(P)H was invariable with time (and hence NAD(P)⁺ concentration was, too). Phase III was substrate-exhausting phase, and the coenzyme concentration became finally only [NAD(P)⁺] or only [NAD(P)H] depending on the initial molar ratio of the prochiral carbonyl compound to the substrate of the coenzyme regeneration reaction ( [Formula: see text] ) > or <1.0. In phases I and II the numerically calculated values of state variables were very close to the analytical but approximate ones. Preferable initial conditions of the batch-wise enzymatic cycling system, i.e., the initial coenzyme species = NAD(P)⁺ and [Formula: see text] , were proposed. As the main assumption irreversibility of the two elemental enzymatic reactions was discussed. Validity of the proposed rate equations was mentioned.

The limits to biocatalysis: pushing the envelope

In the period 1985 to 1995 applications of biocatalysis, driven by the need for more sustainable manufacture of chemicals and catalytic, (enantio)selective methods for the synthesis of pharmaceutical intermediates, largely involved the available hydrolases. This was followed, in the next two decades, by revolutionary developments in protein engineering and directed evolution for the optimisation of enzyme function and performance that totally changed the biocatalysis landscape. In the same period, metabolic engineering and synthetic biology revolutionised the use of whole cell biocatalysis in the synthesis of commodity chemicals by fermentation. In particular, developments in the enzymatic enantioselective synthesis of chiral alcohols and amines are highlighted. Progress in enzyme immobilisation facilitated applications under harsh industrial conditions, such as in organic solvents. The emergence of biocatalytic or chemoenzymatic cascade processes, often with co-immobilised enzymes, has enabled telescoping of multi-step processes. Discovering and inventing new biocatalytic processes, based on (meta)genomic sequencing, evolving enzyme promiscuity, chemomimetic biocatalysis, artificial metalloenzymes, and the introduction of non-canonical amino acids into proteins, are pushing back the limits of biocatalysis function. Finally, the integral role of biocatalysis in developing a biobased carbon-neutral economy is discussed.

Magnetic combined cross-linked enzyme aggregates (Combi-CLEAs) for cofactor regeneration in the synthesis of chiral alcohol

Magnetic Fe₃O₄ nanoparticles were prepared and embedded into the Combi-CLEAs to produce the magnetic Combi-CLEAs in this work. The process for magnetic Combi-CLEAs preparation was optimized, and its properties were investigated. The optimum temperature, thermal stability and optimum pH of magnetic Combi-CLEAs were similar to those of Combi-CLEAs. The catalytic performance of magnetic Combi-CLEAs was tested with the biosynthesis of (S)-ethyl 4-chloro-3-hydroxybutyrate ((S)-CHBE). Magnetic Combi-CLEAs could tolerate higher substrate concentration in the biphasic system. The catalytic efficiency and long-term operational stability of magnetic Combi-CLEAs were obviously superior to those of Combi-CLEAs in both aqueous and biphasic systems. Embedding of magnetic Fe₃O₄ nanoparticles endowing rigidity contributed to these improvements. Furthermore, the preparation of magnetic Combi-CLEAs was easy, and its recovery during multiple batches of reactions could be fulfilled by magnetic field. Aforementioned advantages make the magnetic Combi-CLEAs hold obvious potential for industrial application.

Advances in biotechnological synthetic applications of carbon nanostructured systems

In the last few years carbon nanostructures have been applied for the immobilization of enzymes and biomimetic organo-metallic species useful for biotechnological applications. The nature of the support and the method of immobilization are responsible for the stability, reactivity and selectivity of the system. In this review, we focus on the recent advances in the use of carbon nanostructures, carbon nanotubes, carbon nanorods, fullerene and graphene for the preparation of biocatalytic and biomimetic systems and for their application in the development of green chemical processes.

Engineering Streptomyces coelicolor Carbonyl Reductase for Efficient Atorvastatin Precursor Synthesis

Streptomyces coelicolor CR1 (ScCR1) has been shown to be a promising biocatalyst for the synthesis of an atorvastatin precursor, ethyl-(S)-4-chloro-3-hydroxybutyrate [(S)-CHBE]. However, limitations of ScCR1 observed for practical application include low activity and poor stability. In this work, protein engineering was employed to improve the catalytic efficiency and stability of ScCR1. First, the crystal structure of ScCR1 complexed with NADH and cosubstrate 2-propanol was solved, and the specific activity of ScCR1 was increased from 38.8 U/mg to 168 U/mg (ScCR1_I158V/P168S) by structure-guided engineering. Second, directed evolution was performed to improve the stability using ScCR1_I158V/P168S as a template, affording a triple mutant, ScCR1_{A60T/I158V/P168S}, whose thermostability (T₅₀¹⁵, defined as the temperature at which 50% of initial enzyme activity is lost following a heat treatment for 15 min) and substrate tolerance (C₅₀¹⁵, defined as the concentration at which 50% of initial enzyme activity is lost following incubation for 15 min) were 6.2°C and 4.7-fold higher than those of the wild-type enzyme. Interestingly, the specific activity of the triple mutant was further increased to 260 U/mg. Protein modeling and docking analysis shed light on the origin of the improved activity and stability. In the asymmetric reduction of ethyl-4-chloro-3-oxobutyrate (COBE) on a 300-ml scale, 100 g/liter COBE could be completely converted by only 2 g/liter of lyophilized ScCR1_{A60T/I158V/P168S} within 9 h, affording an excellent enantiomeric excess (ee) of >99% and a space-time yield of 255 g liter^-1 day^-1 These results suggest high efficiency of the protein engineering strategy and good potential of the resulting variant for efficient synthesis of the atorvastatin precursor.IMPORTANCE Application of the carbonyl reductase ScCR1 in asymmetrically synthesizing (S)-CHBE, a key precursor for the blockbuster drug Lipitor, from COBE has been hindered by its low catalytic activity and poor thermostability and substrate tolerance. In this work, protein engineering was employed to improve the catalytic efficiency and stability of ScCR1. The catalytic efficiency, thermostability, and substrate tolerance of ScCR1 were significantly improved by structure-guided engineering and directed evolution. The engineered ScCR1 may serve as a promising biocatalyst for the biosynthesis of (S)-CHBE, and the protein engineering strategy adopted in this work would serve as a useful approach for future engineering of other reductases toward potential application in organic synthesis.

Asymmetric Chemoenzymatic Reductive Acylation of Ketones by a Combined Iron-Catalyzed Hydrogenation-Racemization and Enzymatic Resolution Cascade

A general and practical process for the conversion of prochiral ketones into the corresponding chiral acetates has been realized. An iron carbonyl complex is reported to catalyze the hydrogenation-dehydrogenation-hydrogenation of prochiral ketones. By merging the iron-catalyzed redox reactions with enantioselective enzymatic acylations a wide range of benzylic, aliphatic and (hetero)aromatic ketones, as well as diketones, were reductively acylated. The corresponding products were isolated with high yields and enantioselectivities. The use of an iron catalyst together with molecular hydrogen as the hydrogen donor and readily available ethyl acetate as acyl donor make this cascade process highly interesting in terms of both economic value and environmental credentials.

Addition of a polyhistidine tag alters the regioselectivity of carbonyl reductase S1 from Candida magnoliae

A recombinant carbonyl reductase shows different regioselectivity with a C-terminal His-tag compared to the N-tagged enzyme toward the same triketide substrate. Highly selective synthesis of reference triketides allowed solving this conundrum.

A carbonyl reductase from Candida parapsilosis ATCC 7330: substrate selectivity and enantiospecificity

A purified carbonyl reductase (SRED) asymmetrically reduces ketones and α-ketoesters to (S)-alcohols with a potential application in the synthesis of industrially important chiral molecules.

An experimental modeling of trinomial bioengineering- crp, rDNA, and transporter engineering within single cell factory for maximizing two-phase bioreduction

A carbonyl reductase (cr) gene from Candida glabrata CBS138 has been heterologously expressed in cofactor regenerating E. coli host to convert Ethyl-4-chloro-3-oxobutanoate (COBE) into Ethyl-4-chloro-3-hydroxybutanoate (CHBE). The CR enzyme exhibited marked velocity at substrate concentration as high as 363mM with highest turnover number (112.77±3.95s^-1). Solitary recombineering of such catalytic cell reproduced CHBE 161.04g/L per g of dry cell weight (DCW). Introduction of combinatorially engineered crp (crp*, F136I) into this heterologous E. coli host yielded CHBE 477.54g/L/gDCW. Furthermore, using nerolidol as exogenous cell transporter, the CHBE productivity has been towered to 710.88g/L/gDCW. The CHBE production has thus been upscaled to 8-12 times than those reported so far. qRT-PCR studies revealed that both membrane efflux channels such as acrAB as well as ROS scavenger genes such as ahpCF have been activated by engineering crp. Moreover, membrane protecting genes such as manXYZ together with solvent extrusion associated genes such as glpC have been upregulated inside mutant host. Although numerous proteins have been investigated to convert COBE to CHBE; this is the first approach to use engineering triad involving crp engineering, recombinant DNA engineering and transporter engineering together for improving cell performance during two-phase biocatalysis.

Rapid enzyme regeneration results in the striking catalytic longevity of an engineered, single species, biocatalytic biofilm

BACKGROUND

Engineering of single-species biofilms for enzymatic generation of fine chemicals is attractive. We have recently demonstrated the utility of an engineered Escherichia coli biofilm as a platform for synthesis of 5-halotryptophan. E. coli PHL644, expressing a recombinant tryptophan synthase, was employed to generate a biofilm. Its rapid deposition, and instigation of biofilm formation, was enforced by employing a spin-down method. The biofilm presents a large three-dimensional surface area, excellent for biocatalysis. The catalytic longevity of the engineered biofilm is striking, and we had postulated that this was likely to largely result from protection conferred to recombinant enzymes by biofilm's extracellular matrix. SILAC (stable isotopic labelled amino acids in cell cultures), and in particular dynamic SILAC, in which pulses of different isotopically labelled amino acids are administered to cells over a time course, has been used to follow the fate of proteins. To explore within our spin coated biofilm, whether the recombinant enzyme's longevity might be in part due to its regeneration, we introduced pulses of isotopically labelled lysine and phenylalanine into medium overlaying the biofilm and followed their incorporation over the course of biofilm development.

RESULTS

Through SILAC analysis, we reveal that constant and complete regeneration of recombinant enzymes occurs within spin coated biofilms. The striking catalytic longevity within the biofilm results from more than just simple protection of active enzyme by the biofilm and its associated extracellular matrix. The replenishment of recombinant enzyme is likely to contribute significantly to the catalytic longevity observed for the engineered biofilm system.

CONCLUSIONS

Here we provide the first evidence of a recombinant enzyme's regeneration in an engineered biofilm. The recombinant enzyme was constantly replenished over time as evidenced by dynamic SILAC, which suggests that the engineered E. coli biofilms are highly metabolically active, having a not inconsiderable energetic demand. The constant renewal of recombinant enzyme highlights the attractive possibility of utilising this biofilm system as a dynamic platform into which enzymes of interest can be introduced in a "plug-and-play" fashion and potentially be controlled through promoter switching for production of a series of desired fine chemicals.

Highly enantioselective bioreduction of 1-(3,4-difluorophenyl)-3-nitropropan-1-one: key intermediate of ticagrelor

A simple, highly effective and economical whole-cell mediated process was developed for the biocatalytic reduction of a ketone, intermediate in the synthesis of platelet inhibiting drug ticagrelor.

Rules for biocatalyst and reaction engineering to implement effective, NAD(P)H-dependent, whole cell bioreductions

Access to chiral alcohols of high optical purity is today frequently provided by the enzymatic reduction of precursor ketones. However, bioreductions are complicated by the need for reducing equivalents in the form of NAD(P)H. The high price and molecular weight of NAD(P)H necessitate in situ recycling of catalytic quantities, which is mostly accomplished by enzymatic oxidation of a cheap co-substrate. The coupled oxidoreduction can be either performed by free enzymes in solution or by whole cells. Reductase selection, the decision between cell-free and whole cell reduction system, coenzyme recycling mode and reaction conditions represent design options that strongly affect bioreduction efficiency. In this paper, each option was critically scrutinized and decision rules formulated based on well-described literature examples. The development chain was visualized as a decision-tree that can be used to identify the most promising route towards the production of a specific chiral alcohol. General methods, applications and bottlenecks in the set-up are presented and key experiments required to "test" for decision-making attributes are defined. The reduction of o-chloroacetophenone to (S)-1-(2-chlorophenyl)ethanol was used as one example to demonstrate all the development steps. Detailed analysis of reported large scale bioreductions identified product isolation as a major bottleneck in process design.

NADPH-generating systems in bacteria and archaea

Reduced nicotinamide adenine dinucleotide phosphate (NADPH) is an essential electron donor in all organisms. It provides the reducing power that drives numerous anabolic reactions, including those responsible for the biosynthesis of all major cell components and many products in biotechnology. The efficient synthesis of many of these products, however, is limited by the rate of NADPH regeneration. Hence, a thorough understanding of the reactions involved in the generation of NADPH is required to increase its turnover through rational strain improvement. Traditionally, the main engineering targets for increasing NADPH availability have included the dehydrogenase reactions of the oxidative pentose phosphate pathway and the isocitrate dehydrogenase step of the tricarboxylic acid (TCA) cycle. However, the importance of alternative NADPH-generating reactions has recently become evident. In the current review, the major canonical and non-canonical reactions involved in the production and regeneration of NADPH in prokaryotes are described, and their key enzymes are discussed. In addition, an overview of how different enzymes have been applied to increase NADPH availability and thereby enhance productivity is provided.

Asymmetric synthesis of (S)-4-chloro-3-hydroxybutanoate by sorbose reductase from Candida albicans with two co-existing recombinant Escherichia coli strains

An NADPH-dependent sorbose reductase from Candida albicans was identified to catalyze the asymmetric reduction of ethyl 4-chloro-3-oxobutanoate (COBE). The activity of the recombinant enzyme toward COBE was 6.2 U/mg. The asymmetric reduction of COBE was performed with two coexisting recombinant Escherichia coli strains, in which the recombinant E. coli expressing glucose dehydrogenase was used as an NADPH regenerator. An optical purity of 99% (e.e.) and a maximum yield of 1240 mM (S)-4-chloro-3-hydroxybutanoate were obtained under an optimal biomass ratio of 1:2. A highest turnover number of 53,900 was achieved without adding extra NADP(+)/NADPH compared with those known COBE-catalytic systems.

Construction of allitol synthesis pathway by multi-enzyme coexpression in Escherichia coli and its application in allitol production

An engineered strain for the conversion of D-fructose to allitol was developed by constructing a multi-enzyme coupling pathway and cofactor recycling system in Escherichia coli. D-Psicose-3-epimerase from Ruminococcus sp. and ribitol dehydrogenase from Klebsiella oxytoca were coexpressed to form the multi-enzyme coupling pathway for allitol production. The cofactor recycling system was constructed using the formate dehydrogenase gene from Candida methylica for continuous NADH supply. The recombinant strain produced 10.62 g/l allitol from 100 mM D-fructose. To increase the intracellular concentration of the substrate, the glucose/fructose facilitator gene from Zymomonas mobilis was incorporated into the engineered strain. The results showed that the allitol yield was enhanced significantly to 16.53 g/l with a conversion rate of 92 %. Through optimizing conversion conditions, allitol was produced effectively on a large scale by the whole-cell biotransformation system; the yield reached 48.62 g/l when 500 mM D-fructose was used as the substrate.

A highly efficient designer cell for enantioselective reduction of ketones

A highly efficient designer cell, surf-crs-gdh, which coexpresses carbonyl reductase (crs) and glucose dehydrogenase (gdh) on the cell surface, has been constructed and its enzyme activities were compared with those of the corresponding cell, cyto-crs-gdh, which coexpresses crs and gdh in cytoplasm.

Enantioselective bioreductive preparation of chiral halohydrins employing two newly identified stereocomplementary reductases

Two robust stereocomplementary carbonyl reductases (DhCR andCgCR) for preparation of hylohydrins were identified through rescreening the carbonyl reductase toolbox.

Discovery of a reductase-producing strain recombinant E. coli CCZU-A13 using colorimetric screening and its whole cell-catalyzed biosynthesis of ethyl (R)-4-chloro-3-hydroxybutanoate

An NADH-dependent reductase (SsCR) was discovered by genome data mining. After SsCR was overexpressed in E. coli BL21, recombinant E. coli CCZU-A13 with high reductase activity and excellent stereoselectivity for the reduction of ethyl 4-chloro-3-oxobutanoate (COBE) into ethyl (R)-4-chloro-3-hydroxybutanoate ((R)-CHBE) was screened using one high-throughput colorimetric screening strategy. After the reaction optimization, a highly stereoselective bioreduction of COBE into (R)-CHBE (>99% ee) with the resting cells of E. coli CCZU-A13 was successfully demonstrated in n-butyl acetate-water (10:90, v/v) biphasic system. Biotransformation of 600mM COBE for 8h in the biphasic system, (R)-CHBE (>99% ee) could be obtained in the high yield of 100%. Moreover, the broad substrate specificity in the reduction of aliphatic and aromatic carbonyl compounds was also found. Significantly, E. coli CCZU-A13 shows high potential in the industrial production of (R)-CHBE (>99% ee) and its derivatives.

Strategies for regeneration of nicotinamide coenzymes emphasizing self-sufficient closed-loop recycling systems

Biocatalytic reduction reactions depending on nicotinamide coenzymes require an additional reaction to regenerate the consumed cofactor. For preparative application the preferred method is the simultaneous coupling of an in situ regeneration reaction. There are different strategically advantageous routes to achieve this goal. The standard method uses a second enzyme and a second co-substrate, for example formate and formate dehydrogenase or glucose and glucose dehydrogenase. Alternatively, a second substrate is employed which is converted by the same enzyme used for the primary reaction. For example, alcohol dehydrogenase catalyzed reactions are often coupled with excess 2-propanol which is oxidized to acetone during the regeneration of NAD(P)H. A third method utilizes a reaction-internal sequence by the direct coupling of an oxidizing and a reducing enzyme reaction. Neither an additional substrate nor a further regenerating enzyme are required for the recycling reaction. This kind of "closed-loop" or "self-sufficient" redox process for cofactor regeneration has been used rarely so far. Its most intriguing advantage is that even redox reactions with unstable precursors can be realized provided that this compound is produced in situ by an opposite redox reaction. This elegant method is applicable in special cases only but increasing numbers of examples have been published during the last years.