Electrochemical immunosensor development based on core-shell high-crystalline graphitic carbon nitride@carbon dots and Cd0.5Zn0.5S/d-Ti3C2Tx MXene composite for heart-type fatty acid-binding protein detection

Carbon dots: An emerging food analysis nanoprobes for detection of contaminants

Carbon dots are the new class of nanomaterials with a size range of 10 nm or less. These are associate with the important material properties such as good biocompatibility, fluorescent nature, small size and easy to synthesize with low toxicity which make them the first choice over the fluorescent inorganic materials and dyes, to be used as biocompatible nanoprobes for the detection of food adulterations. Herein, we have focused on the methods of synthesis of these tiny zero dimensions, fluorescent nanomaterials (CDs), their properties, mechanism of fluorescence, and lastly their wide applications in food analysis which include the detection of additives, heavy metal ions, organic pollutants, foodborne microbes, antibiotic and pesticides. Further, these nanomaterials open the scope to be used as nanoprobes in the food safety concern. Additionally, we discussed the challenges and future scope of CDs as an auspicious and emerging nanomaterial to be used in the food industries.

3D-bioprinting of MXenes: Developments, medical applications, challenges, and future roadmap

MXenes is a member of 2D transition metals carbides and nitrides with promising application prospects in energy storage, sensing, nanomedicine, tissue engineering, catalysis, and electronics. In the current era, MXenes have been widely applied in biomedical applications due to their unique rheological and electrochemical attributes. They have a larger surface area with more active sites, higher conductivity, lower cytotoxicity, and greater biocompatibility, making them highly suitable candidates for in-vivo biomedical applications. Due to recent advancemnets in MXenes 3D bioprinting, they are widely applied in regenerative medicine to combat challenges in suitable transplantation of tissues and organs. However, 3D bioprinting of MXenes has several complexities based on cell type, cytotoxicity, cell viability, and differentiation. To address these intricacies, surface modifications of MXene materials are done, which makes them highly fascinating for the 3D printing of tissues and organs. In the current review, we summarized recent progress in 3D bioprinting of MXene materials to construct scaffolds with desired rheological and biological properties, focusing on their potential applications in cancer phototherapy, tissue engineering, bone regeneration, and biosensing. We also discussed parameters affecting their biomedical applications and possible solutions by applying surface modifications. In addition, we addressed current challenges and future roadmaps for 3D bioprinting of MXene materials, such as generating high throughput 3D printed tissue constructs, drug delivery, drug discovery, and toxicology.

Cadmium telluride quantum dot-MXene composite-based electrochemical sensing platform for simultaneous determination of rutin and quercetin in foods

A simple and rapid electrochemical method based on a composite of cadmium telluride quantum dots (CdTe QDs) and MXene is developed for the simultaneous determination of rutin and quercetin in food samples. The CdTe QD-MXene composite is synthesized via the in situ growth of CdTe QDs on MXene, which serves as a carrier and enhances electrical conductivity. Incorporating CdTe QDs into MXene interlayers effectively prevents agglomeration in MXene and provides more active sites for electrochemical determination. The developed electrochemical method can successfully determine rutin and quercetin, both individually and simultaneously, in aqueous solutions while achieving high stability and selectivity. Notably, the prepared sensor exhibits limits of detection of 3.300 × 10-8 and 3.268 × 10-7 M for the simultaneous determination of rutin and quercetin, respectively. Moreover, the sensing platform is used for the determination of rutin in buckwheat, locust rice, and apples, with results well comparable to those obtained using ultraviolet spectroscopy. Finally, the proposed sensor is employed to monitor the hydrolysis of rutin into quercetin in buckwheat using an electrochemical method for the first time. This study provides new ideas for the application of electrochemical sensors in food and drug science.

Antibody-modified 2D MXene nanosheet probes for selective, picolevel detection of cancer biomarkers

Cancer biomarkers are crucial indicators found in clinical samples, playing a key role in early detection, diagnosis, and treatment of cancer. Detecting these biomarkers with high sensitivity is essential for early diagnosis, especially in aggressive cancers like lung cancer, which is the leading cause of cancer-related deaths. Carcinoembryonic antigen (CEA) is a critical biomarker for lung cancer, and its detection aids in identifying the disease at an early stage. Electrochemical sensing, known for its high sensitivity and rapid response, has shown great promise in cancer biomarker detection. MXenes, two-dimensional materials composed of carbides and nitrides, offer excellent electrochemical performance due to their high surface area and conductivity. In this study, MXenes were modified via hydrothermal treatment to produce MXene nanosheets (MNS) with increased interlayer spacing, enhancing their electron transfer capabilities. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) revealed the superior electrochemical properties of MNS compared to pristine MXene. These MNS were functionalized with CEA-specific antibodies using EDC-NHS chemistry, creating a highly specific electrochemical biosensor for CEA detection. The sensor exhibited a remarkable limit of detection at the picogram level and was validated through real-time blood analysis, achieving a 95% recovery rate. This MNS-based biosensor demonstrates significant potential for clinical diagnostics, particularly for the early detection of cancer biomarkers, paving the way for improved cancer treatment outcomes.

MXene-rGO nanocomposite based electrochemical immunosensor for detection of endosulfan - An organochlorine pesticide

Endosulfan (Ed), a widely used organochlorine pesticide, is classified as a persistent organic pollutant (POP). Its long half-life, resistance to degradation, and bioaccumulation in the food chain contaminates soil, water, and air. Such widespread environmental damage triggers monitoring its levels for ensuring compliance with safety regulations and protecting public health. In the current work, Ed was chemically altered and coupled with a carrier protein to elicit an immunological response. The purified in-house generated antibodies against Ed (Ed-Ab) were characterized by sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE). MXene, a class of 2D inorganic compounds, is known to depict significant optoelectrical potential. Herein, we have synthesized a novel nanocomposite of MXene and reduced graphene oxide (rGO). For designing the MXene-rGO biosensor, Ed-Ab were combined with the nanocomposite post characterization by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray photoelectron spectroscopy (XPS) and Fourier Transform infrared spectroscopy (FTIR). Using the differential pulse voltammetry (DPV), electrochemical parameters such as pH, temperature, scan rate and response time of the electrode were evaluated. The fabricated electro-immunosensor was employed for the detection of endosulfan wherein the limit of detection (LOD) for Ed was determined to be 0.497 ppt with a linear range of 0.1 ppt-1 ppm. The composed electrode's working efficacy and sensitivity against similar cross-reactive pesticides was also determined. The MXene-rGO based nanocomposite depicted potential for determination of Ed traces in environmental samples.

An electrochemiluminescence biosensor based on silver-cysteine nanorod as an emitter and AgNP-decorated FeMoOν as a signal amplifier for sensitive detection of heart-type fatty acid binding protein

An electrochemiluminescence (ECL) immunosensor was developed for the highly sensitive and specific detection of heart-type fatty acid binding protein (H-FABP) and the rapid diagnosis of acute myocardial infarction (AMI). H-FABP is a biomarker that is highly specific to cardiac tissue and is associated with a range of cardiac diseases. Following myocardial injury, the rate of increase in H-FABP levels is greater than that observed for myoglobin and troponin. Therefore, the measurement of H-FABP is crucial for the early exclusion of AMI. Silver-cysteine nanorod (AgCysNR), which served as the ECL emitter, was produced with a one-step, green, simple, template-free aqueous phase method. The surfaces of AgCysNR displayed many amino and carboxyl groups that were connected to a large number of a secondary H-FABP-specific antibody. Ferrum-doped molybdenum oxide (FeMoOν), with a large specific surface area, was richly decorated with silver nanoparticle (AgNP), which increased the interfacial electron transfer rate of FeMoOν. The AgNP was used as a co-reaction accelerator to promote persulfate to produce more sulfate anion radical and then enhance the ECL intensity of AgCysNR. The linear range of the ECL immunosensor was 10 fg/mL to 100 ng/mL, and the detection limit was 2.3 fg/mL (signal/noise = 3). The sensor was determined to be stable, repeatable, and reproducible, and the method achieved recoveries of 101.0 to 102.6% with relative standard deviations of 1.4 to 2.0%. This immunosensor represents a promising tool for the early diagnosis of AMI.

A fluorescence-enhanced method specific for furfural determination in Chinese Baijiu based on luminescent carbon dots and direct surface reaction

Detecting the furfural concentration in Baijiu can be used to assess the quality of Baijiu, allowing for the optimization of processing techniques and the enhancement of overall quality. In this paper, a fluorescence-enhanced method based on carbon dots (o-CDs) is developed for the furfural determination in Chinese Baijiu. In an environment full-filled with ·SO4- and ·OH, furfural undergone a direct surface reaction with the ortho-diamino groups at o-CDs. The created furan-based imidazole increased the surface electron density, leading an emission enhancement and color changes from orange to green. Thereby, a linear fluorescence response of o-CDs-TA to furfural is established in water with a detection limit of 30.5 nM. Finally, after ethanol correction it is used to determine furfural in Chinese Baijiu with high precision and reproducibility, providing a new strategy with low-cost and high sensitivity. In particular, the idea of covalently connecting target molecule to the CDs surface via the assistance of free radical opens a new avenue to merge the nanoscale and molecular realms through implementing chemical role into carbon nanostructures.

Biosynthesis, characterization and study of the application of silver nanoparticle for 4-nitrophenol reduction, and antimicrobial activities

Silver nanoparticles (AgNPs) were synthesized from Vigna unguiculata (L) Walp extracted leaves, and characterized. The UV-Visible spectrum showed a peak between 411 and 415 nm at the Plasmon absorbance of the AgNPs. TEM showed that the size of AgNPs ranged from 5 to 13 nm. It was spherical with an average size of 11.08 nm. The size of AgNPs was 7 ± 6 nm and disperse in water. The AgNPs effectively reduced 4-Nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of NaBH4. The AgNPs exhibited a strong antioxidant and antibacterial activity against Gram-negative bacteria: Escherichia coli (E. coli) and Klebsiella pneumonia and Gram-positive: Bacillus pumilus and Staphylococcus aureus. The average zones of inhibition of AgNPs were: 29 mm for Staphylococcus aureus, 23 mm for Bacillus pumilus, 17 mm for Klebsiella pneumonia and 15 mm for Escherichia coli (E. coli). Thus, AgNPs has exhibted good antibacterial activity compared to antibiotics drug and 4-NP reduction.

Combating infections from drug-resistant bacteria: Unleashing synergistic broad-spectrum antibacterial power with high-entropy MXene/CDs

The growing resistance of bacteria to antibiotics has posed challenges in treating associated bacterial infections, while the development of multi-model antibacterial strategies could efficient sterilization to prevent drug resistance. High-entropy MXene has emerged as a promising candidate for antibacterial synergy with inherent photothermal and photodynamic properties. Herein, a high-entropy nanomaterial of MXene/CDs was synthesized to amplify oxidative stress under near-infrared laser irradiation. Well-exfoliated MXene nanosheets have proven to show an excellent photothermal effect for sterilization. The incorporation of CDs could provide photo-generated electrons for MXene nanosheets to generate ROS, meanwhile reducing the recombination of electron-hole pairs to further accelerate the generation of photo-generated electrons. The MXene/CDs material demonstrates outstanding synergistic photothermal and photodynamic effects, possesses excellent biocompatibility and successfully eliminates drug-resistant bacteria as well as inhibits biofilm formation. While attaining a remarkable killing efficiency of up to 99.99% against drug-resistant Escherichia coli and Staphylococcus aureus, it also demonstrates outstanding antibacterial effects against four additional bacterial strains. This work not only establishes a synthesis precedent for preparing high-entropy MXene materials with CDs but also provides a potential approach for addressing the issue of drug-resistant bacterial infections.

Progress and Perspective in harnessing MXene-carbon-based composites (0-3D): Synthesis, performance, and applications

MXene is recognized as a promising catalyst for versatile applications due to its abundant metal sites, physicochemical properties, and structural formation. This comprehensive review offers an in-depth analysis of the incorporation of carbon into MXene, resulting in the formation of MXene-carbon-based composites (MCCs). Pristine MXene exhibits numerous outstanding characteristics, such as its atomically thin 2D structure, hydrophilic surface nature, metallic electrical conductivity, and substantial specific surface area. The introduction of carbon guides the assembly of MCCs through electrostatic self-assembly, pairing positively charged carbon with negatively charged MXene. These interactions result in increased interlayer spacing, reduced ion/electron transport distances, and enhanced surface hydrophilicity. Subsequent sections delve into the synthesis methods for MCCs, focusing on MXene integrated with various carbon structures, including 0D, 1D, 2D, and 3D carbon. Comprehensive discussions explore the distinctive properties of MCCs and the unique advantages they offer in each application domain, emphasizing the contributions and advancements they bring to specific fields. Furthermore, this comprehensive review addresses the challenges encountered by MCCs across different applications. Through these analyses, the review promotes a deeper understanding of exceptional characteristics and potential applications of MCCs. Insights derived from this review can serve as guidance for future research and development efforts, promoting the widespread utilization of MCCs across a broad spectrum of disciplines and spurring future innovations.

Multimetal-Based Metal-Organic Framework System for the Sensitive Detection of Heart-Type Fatty Acid Binding Protein in Electrochemiluminescence Immunoassay

In this work, an electrochemiluminescence (ECL) quenching system using multimetal-organic frameworks (MMOFs) was proposed for the sensitive and specific detection of heart-type fatty acid-binding protein (H-FABP), a marker of acute myocardial infarction (AMI). Bimetallic MOFs containing Ru and Mn as metal centers were synthesized via a one-step hydrothermal method, yielding RuMn MOFs as the ECL emitter. The RuMn MOFs not only possessed the strong ECL performance of Ru(bpy)32+ but also maintained high porosity and original metal active sites characteristic of MOFs. Moreover, under the synergistic effect of MOFs and Ru(bpy)32+, RuMn MOFs have more efficient and stable ECL emission. The trimetal-based MOF (FePtRh MOF) was used as the ECL quencher because of the electron transfer between FePtRh MOFs and RuMn MOFs. In addition, active intramolecular electron transfer from Pt to Fe or Rh atoms also occurred in FePtRh MOFs, which could promote intermolecular electron transfer and improve electron transfer efficiency to enhance the quenching efficiency. The proposed ECL immunosensor demonstrated a wide dynamic range and a low detection limit of 0.01-100 ng mL-1 and 6.8 pg mL-1, respectively, under optimal conditions. The ECL quenching system also presented good specificity, stability, and reproducibility. Therefore, an alternative method for H-FABP detection in clinical diagnosis was provided by this study, highlighting the potential of MMOFs in advancing ECL technology.

Development and Fabrication of a Molecularly Imprinted Polymer-Based Electroanalytical Sensor for the Determination of Acyclovir

Acyclovir (ACV), a synthetic nucleoside derivative of purine, is one of the most potent antiviral medications recommended in the specific management of varicella-zoster and herpes simplex viruses. The molecularly imprinted polymer (MIP) was utilized to create an effective and specific electrochemical sensor using a straightforward photopolymerization process to determine ACV. The polymeric thin coating was developed using the template molecule ACV, a functional monomer acrylamide, a basic monomer 2-hydroxyethyl methacrylate, a cross-linker ethylene glycol dimethacrylate, and a photoinitiator 2-hydroxy-2-methyl propiophenone on the exterior of the glassy carbon electrode (GCE). Scanning electron microscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, electrochemical impedance spectroscopy, and cyclic voltammetry were employed for the purpose of characterizing the constructed sensor (AM-ACV@MIP/GCE). Differential pulse voltammetry and a 5 mM ferrocyanide/ferricyanide ([Fe(CN)6]3-/4-) redox reagent were used to detect the ACV binding to the specific cavities on MIP. The study involves density functional theory (DFT) calculations, which were conducted to investigate template-functional monomer interactions thoroughly, calculate template-functional monomer interaction energies, and determine the optimal template/functional monomer ratio. DFT calculations were performed using Becke's three-parameter hybrid functional with the Lee-Yang-Parr correlation functional (B3LYP) method and 6-31G(d,p) basis set. The sensor exhibits linear performance throughout the concentration region 1 × 10-11 to 1 × 10-10 M, and the limit of detection and limit of quantification were 7.15 × 10-13 M and 2.38 × 10-12 M, respectively. For the electrochemical study of ACV, the sensor demonstrated high accuracy, precision, robustness, and a short detection time. Furthermore, the developed electrochemical sensor exhibited exceptional recovery in tablet dosage form and commercial human blood samples, with recoveries of 99.40 and 100.44%, respectively. The findings showed that the AM-ACV@MIP/GCE sensor would effectively be used to directly assess pharmaceuticals from actual specimens and would particularly detect ACV compared to structurally similar pharmaceutical compounds.

Aminosilanized Interface Promotes Electrochemically Stable Carbon Nitride Films with Fewer Trap States on FTO for (Photo)electrochemical Systems

We have demonstrated the direct growth of a CNx layer on a plasma-cleaned and aminosilanized F-doped SnO2 (FTO) electrode to study the CNx|FTO interface that is critical for (photo)electrocatalytic systems. The (3-aminopropyl)triethoxysilane (APTES) was chosen as a bifunctional organosilane, with the amino end incorporating into CNx and the silane end connecting to the hydroxylated FTO surface. Plasma cleaning and aminosilanization resulted in a highly hydrophilic surface, which leads to better contact of melted thiourea to the aminosilanized FTO (p-FTONH2) during CNx polymer condensation, thus generating a thinner and more compact CNx layer. The modification at the interface was shown to influence the CNx growth on length scales of tens of micrometers. We grew CNx thin films on p-FTONH2 (CNx/p-FTONH2) and nonaminosilanized p-FTO (CNx/p-FTO). CNx/p-FTONH2 had a smaller density of trap states and passed 2.4 times the charges before failure compared to CNx/p-FTO. Additionally, a 40% decrease in interfacial charge transfer resistance at the CNx|electrolyte interface was measured for CNx/p-FTONH2 compared to CNx/p-FTO under -0.5 V vs RHE in 0.1 M Na2SO4. Furthermore, with the CNx surface coated with a Pt cocatalyst, Pt/CNx/p-FTONH2 exhibited faster hydrogen evolution rates and larger current densities than Pt/CNx/p-FTO. The highest Faraday efficiency toward electrochemical hydrogen evolution (FEH2) in 0.1 M Na2SO4 (pH = 7) was 46.1%, 37.3%, 57.7%, and 70.5% for Pt/CNx/p-FTONH2, Pt/CNx/p-FTO, CNx/p-FTONH2, and CNx/p-FTO, respectively. The increase in hydrogen evolution rate did not follow the magnitude of the current density change, indicating electrochemical processes other than proton reduction. Overall, we have carefully investigated the CNx|FTO interface and suggested potential solutions to make CNx films better (photo)electrodes for (photo)electrochemical systems.

A Methylene Blue-Enhanced Nanostructured Electrochemical Immunosensor for H-FABP Myocardial Injury Biomarker

A sensitive electrochemical immunosensor for the detection of the heart-type fatty acid binding protein (HFABP), an earlier biomarker for acute myocardial infarction than Troponins, is described. The sensing platform was enhanced with methylene blue (MB) redox coupled to carbon nanotubes (CNT) assembled on a polymer film of polythionine (PTh). For this strategy, monomers of thionine rich in amine groups were electrosynthesized by cyclic voltammetry on the immunosensor's gold surface, forming an electroactive film with excellent electron transfer capacity. Stepwise sensor surface preparation was electrochemically characterized at each step and scanning electronic microscopy was carried out showing all the preparation steps. The assembled sensor platform combines MB and PTh in a synergism, allowing sensitive detection of the H-FABP in a linear response from 3.0 to 25.0 ng∙mL-1 with a limit of detection of 1.47 ng∙mL-1 HFABP that is similar to the clinical level range for diagnostics. H-FABP is a newer powerful biomarker for distinguishing between unstable angina and acute myocardial infarction.

MXene-sensitized electrochemiluminescence sensor for thrombin activity detection and inhibitor screening

Thrombin, a crucial enzyme involved in blood coagulation and associated diseases, requires accurate detection of its activity and screening of inhibitors for clinical diagnosis and drug discovery. To address this, an electrochemiluminescence (ECL) method was developed to detect thrombin activity based on the sensitization of Ti₃C₂T_x MXene, which could sensitize the Ru(bpy)₃²⁺ ECL system greatly. The thrombin-cleavable substrate bio-S-G-R-P-V-L-G-C was used as recognizer to evaluate the activity of thrombin. Under the optimal conditions, the limit of detection for thrombin in serum was 83 pU/mL (S/N = 3) with a linear range from 0.1 nU/mL to 1 µU/mL. Moreover, the developed ECL biosensor was employed to screen for thrombin inhibitors from Artemisiae argyi Folium. Four potential thrombin inhibitors (isoquercitrin, nepetin, L-camphor, L-borneol) were screened out with inhibition rates beyond 50%, among which isoquercitrin had the best inhibition rate of 90.26%. Isoquercitrin and nepetin were found to be competitive inhibitors of thrombin, with [Formula: see text] values of 0.91 μM and 2.18 μM, respectively. Molecular docking results showed that these compounds could interact with the active sites of thrombin through hydrogen bonds including ASP189, SER195, GLY216, and GLY219. The electrochemical biosensor constructed provides a new idea for the detection of thrombin activity and screening of its inhibitors.

Dual-mode immunosensor based on Cu-doped Mo2C nanosheets as signal labels

A method for detecting of Carcinoembryonic antigen(CEA) with improved accuracy is urgently needed. In this work, a dual-mode immunosensor for accurate detection of CEA was fabricated, which used a Cu-doped Mo₂C co-catalyst as an enhancer. Especially, Cu-doped Mo₂C presents a strong different pulse voltammetry (DPV) signal for the electron transfer between Cu²⁺ and Cu⁺, without the addition of K₃[Fe(CN₆)] and other electron transfer mediators, but also shows high electrocatalytic activity towards H₂O₂ redox reactions. So that detection sensitivity of the chronoamperometry (CA) was enhanced. Furthermore, characterized by excellent conductivity, highly ordered pore distribution and great surface area, Ti₃C₂ Mxenes can be effective in promoting electron transfer and loading a large number of AuNPs. In the meantime, AuNPs can also immobilize CEA-Ab₁ through Au-N bonds. Based on a Cu-Mo₂C-Au dual-signal indicator, Ti₃C₂ Mxene-Au as the matrix, the immunsosensor was developed to achieve dual-signal detection of CEA. Satisfactory detection ranges (1 fg.mL^-1 to 40 ng.mL^-1) were obtained with limits of detection of 0.33 fg.ml^-1 (DPV) and 1.67 fg.ml^-1 (CA), respectively. Therefore, the prepared electrochemical immunosensor has good application prospects for the detection of CEA.

Highly sensitive electro-oxidative voltammetric determination of anthelmintic drug albendazole using porous graphitic carbon nitride sensor infused with cationic micellar solution

A sensitive and novel electrochemical senser, acetyl trimethylammonium bromide (CTAB)-immobilized nitrogen rich g-C₃N₄ nanosheet modified carbon paste electrode was developed, for the electrochemical investigation of the anthelmintic drug Albendazole (ABZ) using voltammetric tools like cyclic and square wave voltammetry. The results showed that the modified carbon paste electrode exhibited remarkable electro-catalytic action towards the electrochemical oxidation of ABZ in a phosphate buffer solution at pH 3 compared to bare carbon paste electrode. The electrode material was characterized by CV, scanning electron microscopy (SEM), atomic force microscope (AFM), and electrochemical impedance spectroscopy (EIS). A highly sensitive square wave voltammetric technique was developed for the determination of ABZ, at a trace level with great precision and accuracy, good limit of detection (LOD) 0.01 µM and limit of quantification (LOQ) of 0.036 µM, in the concentration range of 0.2-10 µM. This approach can be used in pharmaceutical formulations for clinical diagnosis, quality assurance, and drug screening. In addition, this technique is also implemented for the assessment of ABZ in water samples and biological samples like urine and blood plasma.

Carbendazim imprinted electrochemical sensor based on CdMoO4/g-C3N4 nanocomposite: Application to fruit juice samples

Carbendazim (CAR) as a fungicide is utilized for fruits and vegetables to provide diseases' control and the degradation of carbendazim having benzimidazole ring is slow. Herein, a molecularly imprinted electrochemical sensor based on CdMoO₄/g-C₃N₄ nanocomposite was prepared for CAR determination in fruit juice samples. Firstly, CdMoO₄/g-C₃N₄ nanocomposite with high yield was fabricated via one-pot in-situ hydrothermal approach including environmentally friendly method. Formation of CAR imprinted polymers was performed on CdMoO₄/g-C₃N₄ nanocomposite modified glassy carbon electrode (GCE) in presence of CAR as template and pyrrole (Py) as a monomer by cyclic voltammetry (CV) technique. Following the morphological, structural, and optical characterization of as-synthesized nanocomposite, the electrochemical techniques were also implemented to evaluate the electrochemical features of fabricated electrodes. The limit of quantification (LOQ) and limit of detection (LOD) values were calculated as 0.1 × 10^-10 M, and 2.5 × 10^-12 M, respectively in addition to satisfactory selectivity, stability, reproducibility and reusability. The findings revealed that the proposed CAR imprinted electrochemical sensor can be successfully employed in food safety.

A novel platform based on CoMn2O4-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode for voltammetric detection of pethidine in the presence morphine and olanzapine

The present work focuses on the development of a new electrochemical platform based on CoMn₂O₄-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode (CoMn₂O₄-rGO/IL/CPE) for electrochemical determination of pethidine in the presence of biological species. For the first time, the electrooxidation mechanism of pethidine in presences of morphine and olanzapine is investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) technologies. The as-synthesized CoMn₂O₄-rGO nanocomposites are characterized by physicochemical measurements such as X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), Field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared (FT-IR). The obtained results illustrated synergistic interactions between rGO and CoMn₂O₄ structures. Also, to investigate the electrode charge-transfer resistances, electrochemical features of the resulting nanocomposites are studied via electrochemical impedance spectroscopy (EIS) analysis. Based on the result, three segmented linear ranges are observed over the range 0.08-900 μM and detection limit of 0.024 μM. Over the 10.0-40.0 μM ranges of pethidine in phosphate buffer solution (PBS-pH 7.0), suitable diffusion coefficient of 5.67 × 10^-7 cm² s^-1 is evaluated by chronoamperometry technique (CHA). Finally, the CoMn₂O₄-rGO/IL/CPE with high sensitivity, selectivity and repeatability is successfully used for determination of pethidine in real sample and drug formulation.

Electrochemical biosensor based on topological insulator Bi2Se3 tape electrode for HIV-1 DNA detection

A large-size Bi₂Se₃ tape electrode (BTE) was prepared by peeling off a 2 × 1 × 0.5 cm high-quality single crystal. The feasibility of using the flexible BTE as an efficient bioplatform to load Au nanoparticles and probe DNA for HIV-1 DNA electrochemical sensing was explored. Differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) show that the resultant biosensor has a wide linear range from 0.1 fM to 1 pM, a low detection limit of 50 aM, excellent selectivity, reproducibility and stability, and is superior to the pM DNA detection level of Pt-Au, graphene-AuNPs hybrid biosensors. This outstanding performance is attributed to the intrinsic surface state of Bi₂Se₃ topological insulator in facilitating electron transfer. Therefore, BTE electrochemical biosensor platform has great potential in the application for sensitive detection of DNA biomarkers.

Graphene-Based Electrochemical Sensors for Psychoactive Drugs

Sensors developed from nanomaterials are increasingly used in a variety of fields, from simple wearable or medical sensors to be used at home to monitor health, to more complicated sensors being used by border customs or aviation industries. In recent times, nanoparticle-based sensors have begun to revolutionize drug-detection techniques, mainly due to their affordability, ease of use and portability, compared to conventional chromatography techniques. Thin graphene layers provide a significantly high surface to weight ratio compared to other nanomaterials, a characteristic that has led to the design of more sensitive and reliable sensors. The exceptional properties of graphene coupled with its potential to be tuned to target specific molecules have made graphene-based sensors one of the most popular and well-researched sensing materials of the past two decades with applications in environmental monitoring, medical diagnostics, and industries. Here, we present a review of developments in the applications of graphene-based sensors in sensing drugs such as cocaine, morphine, methamphetamine, ketamine, tramadol and so forth in the past decade. We compare graphene sensors with other sensors developed from ultrathin two-dimensional materials, such as transition-metal dichalcogenides, hexagonal boron nitrate, and MXenes, to measure drugs directly and indirectly, in various samples.

Recent Advances of MXene-Based Electrochemical Immunosensors

Electrochemical immunosensors are the largest class of affinity biosensing devices with strong practicability. In recent years, MXenes have become hotspot materials of electrochemical biosensors for their excellent properties, including large specific surface area, good electrical conductivity, high hydrophilicity and rich functional groups. In this review, we firstly introduce the composition and structure of MXenes, as well as their properties relevant to the construction of biosensors. Then, we summarize the recent advances of MXenes-based electrochemical immunosensors, focusing on the roles of MXenes in various electrochemical immunosensors. Finally, we analyze current problems of MXenes-based electrochemical immunosensors and propose an outlook for this research field.

Low-temperature synthesis of hetero-structures of magnetically separable iron oxide@Au-rGO nanocomposite for efficient degradation of organic dye under visible light irradiation

In the present study, Fe₃O₄@Au core-shell nanoparticles decorated on reduce graphene oxide (Fe₃O₄@Au/rGO) nanocomposite were synthesized using the reduction method by sodium citrate, Hummer's method, and hydrothermal method, respectively. The as-prepared nanostructures were characterized by X-ray diffraction (XRD), Energy Dispersive X-ray (EDX), transmission electron microscopy (TEM), scanning electron microscopy (SEM)to assess the surface features, crystallinity and morphological characteristics. These nanostructures were employed for photocatalytic degradation of crystal violet (CV), and amongst them, Fe₃O₄@Au/rGO nanocomposite offered the best results under the visible light irradiation and optimal conditions. The effect of the amount of nano-photocatalyst, initial CV concentration, the initial pH, temperature, stirring speed, and degradation time was evaluated individually. A 100% degradation was obtained after 1 min in the presence of 0.008 g nano-photocatalyst, and also 100% of degradation was achieved after 5 min in the presence of 0.005 g of the prepared nano-photocatalyst. After a few tests, its photocatalytic performance was retained, implying the superior stability of Fe₃O₄@Au/rGO nanocomposite. The kinetic study of photocatalytic degradation also indicated that the fit model for the kinetic reaction was the pseudo-second-order kinetic model. Finally, the photocatalytic degradation of real samples with synthesized nanocomposite showed promising results.

Electroanalytical point-of-care detection of gold standard and emerging cardiac biomarkers for stratification and monitoring in intensive care medicine - a review

Determination of specific cardiac biomarkers (CBs) during the diagnosis and management of adverse cardiovascular events such as acute myocardial infarction (AMI) has become commonplace in emergency department (ED), cardiology and many other ward settings. Cardiac troponins (cTnT and cTnI) and natriuretic peptides (BNP and NT-pro-BNP) are the preferred biomarkers in clinical practice for the diagnostic workup of AMI, acute coronary syndrome (ACS) and other types of myocardial ischaemia and heart failure (HF), while the roles and possible clinical applications of several other potential biomarkers continue to be evaluated and are the subject of several comprehensive reviews. The requirement for rapid, repeated testing of a small number of CBs in ED and cardiology patients has led to the development of point-of-care (PoC) technology to circumvent the need for remote and lengthy testing procedures in the hospital pathology laboratories. Electroanalytical sensing platforms have the potential to meet these requirements. This review aims firstly to reflect on the potential benefits of rapid CB testing in critically ill patients, a very distinct cohort of patients with deranged baseline levels of CBs. We summarise their source and clinical relevance and are the first to report the required analytical ranges for such technology to be of value in this patient cohort. Secondly, we review the current electrochemical approaches, including its sub-variants such as photoelectrochemical and electrochemiluminescence, for the determination  of important CBs highlighting the various strategies used, namely the use of micro- and nanomaterials, to maximise the sensitivities and selectivities of such approaches. Finally, we consider the challenges that must be overcome to allow for the commercialisation of this technology and transition into intensive care medicine.

Simultaneous and selective electrochemical sensing of methotrexate and folic acid in biological fluids and pharmaceutical samples using Fe3O4/ppy/Pd nanocomposite modified screen printed graphite electrode

The purpose of this study was to fabricate an electrochemical sensor for the detection of methotrexate and folic acid based on a screen-printed graphite electrode (SPGE) modified with prepared iron oxide (Fe₃O₄)/polypyrrole (ppy)/Palladium (Pd) nanocomposite. Transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FT-IR) techniques were employed to characterize the Fe₃O₄/ppy/Pd nanocomposite. The produced modifier was used to induce a remarkable electrocatalytic impact relative to the oxidation of methotrexate, which caused the potential peak shift to a less positive amount (from 800 mV to about 500 mV) and improved the peak current (from 5.3 μA to about 16 μA). Methotrexate peak current was linearly dependent on its concentration from 0.03100.0 μM and the limit of detection (LOD) was estimated at 7.0 nM. The methotrexate and folic acid were co-detected by the proposed sensor. The experimental results indicated that the oxidation peaks of methotrexate and folic acid were separated about 200 mV in phosphate buffer solution (PBS) at pH 7.0. Fe₃O₄/ppy/Pd/SPGE was successfully able to detect methotrexate and folic acid in pharmaceutical and biological samples with excellent recovery.

A green and sensitive guanine-based DNA biosensor for idarubicin anticancer monitoring in biological samples: A simple and fast strategy for control of health quality in chemotherapy procedure confirmed by docking investigation

Drug efficiency can be considerably boosted while adverse effects can be reduced by precisely monitoring the concentration of anti-cancer drugs. Thus, one of the most important parameters for human health is the monitoring and detection of anticancer drugs during chemotherapy treatment. Herein, a glassy carbon electrode (GCE) was modified by Pt- and Pd-incorporated ZnO nanoparticles-decorated single-wall carbon nanotubes (Pt-Pd-ZnO/SWCNTs) nanocomposites, and ds-DNA (Calf Thymus) that was a biological recognition element, and it was aimed to be utilized as an ultrasensitive and effective electroanalytical biosensor for idarubicin (IDR) monitoring. Various physicochemical characterization techniques including transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM) with energy-dispersive X-ray spectroscopy (EDS) were used to investigate the morphology and structure of the Pt-Pd-ZnO/SWCNTs nanocomposite, which was produced via straightforward chemical precipitation combined with the one-pot method. The layer-by-layer modification technique was implemented to fabricate the ds-DNA/Pt-Pd-ZnO/SWCNTs/GCE to be further utilized as a voltammetric sensor for sensitive monitoring of idarubicin in biological fluids and pharmaceutical substances. The electroanalytical method implemented to detect idarubicin was based to detect the ds-DNA's guanine base signal on the surface of the modified electrode in the absence and presence of the anticancer drug. The results explicated that the developed biosensor performed well in determining idarubicin in concentrations ranging from 1.0 nM to 65 μM, with a detection limit of 0.8 nM. The idarubicin detection ability of the modified electrode in real samples was evaluated, and the recovery data was acquired in the range of 98.0% and 104.75%. In the final step, the preferential intercalative binding mode of idarubicin drug with ds-DNA was approved by molecular docking study. This study paves the way for engineering highly sensitive DNA biosensors to be employed in the monitoring of anticancer drugs by combining the benefits of nanocomposites and valuable information of a molecular docking study.

2D metal carbides and nitrides (MXenes) for sensors and biosensors

MXenes are layered two-dimensional (2D) materials discovered in 2011 (Ti₃C₂X) and are otherwise called 2D transition metal carbides, carbonitrides, and nitrides. These 2D layered materials have been in the limelight for a decade due to their interesting properties such as large surface area, high ion transport, biocompatibility, and low diffusion barrier. Therefore, MXenes are widely preferred by researchers for applications in electronics, sensing, biosensing, electrocatalysis, super-capacitors and fuel cells. There are a number of methods available for the bulk synthesis of MXene-based nanomaterials. In addition, the possibility of structural modification as required and its outstanding surface chemistry offer a fascinating interface for the development of novel biosensors. In this review, we specifically discuss important MXene synthesis routes. Moreover, critical parameters such as surface functionalization that can dictate the mechanical, electronic, magnetic, and optical properties of MXenes are also discussed. Following this, methods available for the surface functionalization and modification strategies of MXenes are also discussed. Furthermore, the emergence of gas, electrochemical, and optical biosensors based on MXenes since its first report is discussed in detail. Finally, future directions of MXenes biosensors for critical applications are discussed.

Hybridized 1D-2D MnMoO4-MXene nanocomposites as high-performing electrochemical sensing platform for the sensitive detection of dihydroxybenzene isomers in wastewater samples

Hydroquinone (HQ) and catechol (CC) are the two major dihydroxybenzene isomers, are considered one of the toxic pollutants in wastewater, which often coexisted and impede each other during sample identification. For practical analysis and simultaneous detection of HQ and CC in wastewater, we fabricate a hybrid electrochemical sensor with electrospun one-dimensional (1D) MnMoO₄ nanofibers coupled with a few-layered exfoliated two-dimensional (2D) MXene. The facilitated abundant defective edges of 1D MnMoO₄ and 2D MXene nanoarchitecture accelerated the effect of synergistic signal amplification and exhibited high electrocatalytic activity towards the oxidation of hydroquinone and catechol. MnMoO₄-MXene-GCE showed oxidation potentials of 0.102 V and 0.203 V for hydroquinone and catechol, respectively. It revealed the distinguished and simultaneous detection range of 0.101 V with a strong anodic peak current. Noteworthily, the proposed 1D-2D hybridized MnMoO₄-MXene-GCE sensor exhibited a wide linear response from 5 nM to 65 nM for hydroquinone and catechol. Moreover, it showed a low detection limit of 0.26 nM and 0.30 nM for HQ and CC with high stability, respectively. The feasible 1D-2D MnMoO₄-MXene nanocomposite-based biosensor effectively detected hydroquinone and catechol in hazardous water pollutants using the differential pulse voltammetric technique with recovery values.

In situ electrochemical synthesis of graphene-poly(arginine) composite for p-nitrophenol monitoring

Para-Nitrophenol (p-nitrophenol) is a common industrial pollutant occurring widely in water bodies, yet actual monitoring methods are limited. Herein we proposed a fully electrochemically in situ synthesized graphene-polyarginine composite functionalized screen printed electrode, as a novel p-nitrophenol sensing platform. The electrode was characterized by morphologic, spectrometric and electrochemical techniques. p-nitrophenol in both pure aqueous solution and real water samples was tested. Results show a detection limit as low as the nanomolar level, and display a linear response and high selectivity in the range of 0.5-1250 μM. Molecular simulation reveals a detailed synergy between graphene and poly-arginine. The preferable orientation of nitrophenol molecules on the graphene interface in the presence of poly-arginine induces H- and ionic binding. This sensor is an ideal prototype for p-nitrophenol quantification in real waters.

Removal of metal ions using a new magnetic chitosan nano-bio-adsorbent; A powerful approach in water treatment

In this study, a magnetic chitosan/Al₂O₃/Fe₃O₄ (M-Cs) nanocomposite was developed by ethylenediaminetetraacetic acid (EDTA) functionalization to enhance its adsorption behavior for the removal of Cd(II), Cu(II) and Zn(II) metal ions from aqueous solution. The results revealed that the EDTA functionalization of M-Cs increased its adsorption capacity ~9.1, ~5.6 and ~14.3 times toward Cu, Cd and Zn ions. The maximum adsorption capacity followed the order of Cd(II) > Cu(II) > Zn(II) and the maximum adsorption efficiency was achieved at pH of 5.3 with the removal percentage of 99.98, 93.69 and 83.81 %, respectively, for the removal of Cu, Cd and Zn ions. The metal ions adsorption kinetic obeyed pseudo-second-order equation and the Langmuir isothermal was found the most fitted model for their adsorption isothermal experimental data. In addition, the thermodynamic study illustrated that the adsorption process was exothermic and spontaneous in nature.

Zn0.94Mn0.06O for adsorption and photo-degradation of methyl orange dye under visible irradiation: Kinetics and isotherms study

Three photocatalyst-adsorbents consist of Zn_0.97Mn_0.03O, Zn_0.94Mn_0.06O, and Zn_0.92Mn_0.08O were synthesized by hydrothermal method and calcined at 800 °C. The structural and optical properties of the sample Zn_0.94Mn_0.06O were characterized by using XRD; TEM; SEM; EDS; DLS; and DRS. The surface of the sample Zn_0.94Mn_0.06O consists of nano-particles (<100 nm) and nano-holes (18.4 nm), also the band-gap of it was obtained 2.89 eV. Adsorption and photo-degradation of methyl orange (MO) dye was investigated in darkness and under visible light irradiation (200 W tungsten). The sample Zn_0.94Mn_0.06O showed the most decolorization efficiency in the shortest time, so that 0.15 g of it adsorbed and destroyed the MO dye molecules (99 ± 1 %) in 40 s under irradiation. The most adsorption capacity of Zn_0.94Mn_0.06O was obtained 30.06 mg/g and the mechanism of the dye adsorption was investigated by using BET analysis and zeta potential. Also the adsorption isotherm and kinetics were calculated for describing the adsorption of MO onto the Zn_0.94Mn_0.06O.

Efficient and fast degradation of 4-nitrophenol and detection of Fe(III) ions by Poria cocos extract stabilized silver nanoparticles

In this study, a simple and environment-friendly method has been successfully applied for the production of silver nanoparticles (AgNPs) using Poria cocos extract. The reaction time of 60 min, the temperature of 90 °C, and silver ion concentration of 2.0 mM were identified as the best condition for the PC-AgNPs fabrication. The XRD analysis confirmed a highly crystalline face-centered cubic structure of the biosynthesized material. The PC-AgNPs were presented separately in a spherical shape with an average crystal size of 20 nm, as endorsed by the TEM and FE-SEM measurements. The presence and crucial role of biomolecules in stabilizing the nanoparticles were elucidated by FTIR, EDX, and DLS techniques. The prepared biogenic nanoparticles were further applied for the reduction of 4-nitrophenol (4-NP) and colorimetric detection of Fe³⁺ ions. The study results proved that PC-AgNPs exhibited superior catalytic activity and reusability in the conversion of 4-NP by NaBH₄. The complete reduction of 4-NP could be achieved in 10 min with the pseudo-first-order rate constant of 0.466 min^-1, and no significant performance loss was found when the material was reused five times. The colorimetric probe based on PC-AgNPs displayed outstanding sensitivity and selectivity towards Fe³⁺ ions with a detection limit of 1.5 μM in a linear range of 0-250 μM. Additionally, the applicability of the developed assay was explored for testing Fe³⁺ ions in tap water. PC-AgNPs have a great potential for further applications as a promising catalyst for reducing nitrophenols and biosensors for the routine monitoring of Fe³⁺ in water.

Voltammetric sensor based on bimetallic nanocomposite for determination of favipiravir as an antiviral drug

A novel and sensitive voltammetric nanosensor was developed for the first time for trace level monitoring of favipiravir based on gold/silver core–shell nanoparticles (Au@Ag CSNPs) with conductive polymer poly (3,4-ethylene dioxythiophene) polystyrene sulfonate (PEDOT:PSS) and functionalized multi carbon nanotubes (F-MWCNTs) on a glassy carbon electrode (GCE). The formation of Au@Ag CSNPs/PEDOT:PSS/F-MWCNT composite was confirmed by various analytical techniques, including X-ray diffraction (XRD), ultraviolet–visible spectroscopy (UV–Vis), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and field-emission scanning electron microscopy (SEM). Under the optimized conditions and at a typical working potential of + 1.23 V (vs. Ag/AgCl), the Au@Ag CSNPs/PEDOT:PSS/F-MWCNT/GCE revealed linear quantitative ranges from 0.005 to 0.009 and 0.009 to 1.95 µM with a limit of detection 0.46 nM (S/N = 3) with acceptable relative standard deviations (1.1-4.9 %) for pharmaceutical formulations, urine, and human plasma samples without applying any sample pretreatment (1.12–4.93%). The interference effect of antiviral drugs, biological compounds, and amino acids was negligible, and the sensing system demonstrated outstanding reproducibility, repeatability, stability, and reusability. The findings revealed that this assay strategy has promising applications in diagnosing FAV in clinical samples, which could be attributed to the large surface area on active sites and high conductivity of bimetallic nanocomposite.

Sensitive sandwich-type electrochemical SARS-CoV‑2 nucleocapsid protein immunosensor

A sensitive and fast sandwich-type electrochemical SARS-CoV‑2 (COVID-19) nucleocapsid protein immunosensor was prepared based on bismuth tungstate/bismuth sulfide composite (Bi2WO6/Bi2S3) as electrode platform and graphitic carbon nitride sheet decorated with gold nanoparticles (Au NPs) and tungsten trioxide sphere composite (g-C3N4/Au/WO3) as signal amplification. The electrostatic interactions between capture antibody and Bi2WO6/Bi2S3 led to immobilization of the capture nucleocapsid antibody. The detection antibody was then conjugated to g-C3N4/Au/WO3 via the affinity of amino-gold. After physicochemically characterization via transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS) analysis were implemented to evaluate the electrochemical performance of the prepared immunosensor. The detection of SARS-CoV-2 nucleocapsid protein (SARS-CoV-2 NP) in a small saliva sample (100.0 µL) took just 30 min and yielded a detection limit (LOD) of 3.00 fg mL-1, making it an effective tool for point-of-care COVID-19 testing.

An electrochemical immunosensor for the detection of carcinoembryonic antigen based on Au/g-C3N4 NSs-modified electrode and CuCo/CNC as signal tag

Carcinoembryonic antigen levels in the human body reflect the conditions associated with a variety of tumors and can be used for the identification, development, monitoring, and prognosis of lung cancer, colorectal cancer, and breast cancer. In this study, an amperometric immunosensor with CuCo/carbon nanocubes (CuCo/CNC) as the signal label is constructed. The bimetal-doped carbon skeleton structure has a high specific surface area and exhibits good electrocatalytic activity. In addition, Au/g-C₃N₄ nanosheets (Au/g-C₃N₄ NSs) are used to modify the substrate platform, facilitating the loading of more capture antibodies. The reaction mechanism was explored through electrochemical methods, X-ray powder diffraction, X-ray photoelectron spectroscopy, and other methods. Kinetic studies have shown that CuCo/CNC have good peroxidase-like activity. In addition, the electrocatalytic reduction ability of CuCo/CNC on hydrogen peroxide can be monitored using amperometric i-t curve (- 0.2 V, vs. SCE), and the response current value is positively correlated with the CEA antigen concentration. The prepared electrochemical immunosensor has good selectivity, precision, and stability. The dynamic range of the sensor was 0.0001-80 ng/mL, and the detection limit was 0.031 pg/mL. In addition, the recovery and relative standard deviation in real serum samples were 97.7-103 % and 3.25-4.13 %, respectively. The results show that the sensor has good analytical capabilities and can provide a new method for the clinical monitoring of CEA.

Carbon Dots: Classification, Properties, Synthesis, Characterization, and Applications in Health Care-An Updated Review (2018-2021)

Carbon dots (CDs) are usually smaller than 10 nm in size, and are meticulously formulated and recently introduced nanomaterials, among the other types of carbon-based nanomaterials. They have gained significant attention and an incredible interest in the field of nanotechnology and biomedical science, which is merely due to their considerable and exclusive attributes; including their enhanced electron transferability, photobleaching and photo-blinking effects, high photoluminescent quantum yield, fluorescence property, resistance to photo-decomposition, increased electrocatalytic activity, good aqueous solubility, excellent biocompatibility, long-term chemical stability, cost-effectiveness, negligible toxicity, and acquaintance of large effective surface area-to-volume ratio. CDs can be readily functionalized owing to the abundant functional groups on their surfaces, and they also exhibit remarkable sensing features such as specific, selective, and multiplex detectability. In addition, the physico-chemical characteristics of CDs can be easily tunable based on their intended usage or application. In this comprehensive review article, we mainly discuss the classification of CDs, their ideal properties, their general synthesis approaches, and primary characterization techniques. More importantly, we update the readers about the recent trends of CDs in health care applications (viz., their substantial and prominent role in the area of electrochemical and optical biosensing, bioimaging, drug/gene delivery, as well as in photodynamic/photothermal therapy).

Carbon Material Based Electrochemical Immunosensor for Gastric Cancer Markers Detection

Gastric cancer is one of the most common malignant tumors, and early diagnosis will be of great significance to improve the survival quality and overall treatment outcome evaluation of patients. Nanoelectrochemical immunosensor is an emerging biosensor combining nanotechnology, electrochemical analysis method and immunological technology, which has simple operation, fast analysis speed, high sensitivity, and good selectivity. This mini-review summarized immunoassay techniques, nanotechnology and electrochemical sensing for the early detection of gastric cancer. In particular, we focus on the tension of carbon nanomaterials in this field, including the functionalized preparation of materials, signal enhancement and the construction of novel sensing interfaces. Currently, various tumor markers are being developed, but the more recognized gastric cancer tumor markers are carcinoembryonic antigen (CEA), carbohydrate antigen (CA), CD44V9, miRNAs, and programmed death ligand 1. Among them, the electrochemical immunosensor allows the detection of CEA, CA, and miRNAs. The mini-review focused on the development of using carbon based materials, especially carbon nanotubes and graphene for immunosensor fabrication and gastric cancer markers detection.

Tin derived antimony/nitrogen-doped porous carbon (Sb/NPC) composite for electrochemical sensing of albumin from hepatocellular carcinoma patients

An electrochemical sensor based on an antimony/nitrogen-doped porous carbon (Sb/NPC) composite has been developed for the quantitative detection of albumin from hepatocellular carcinoma (HCC) patients. Sb/NPC is hydrothermally synthesized from Sn/NPC precursors. The synthesized precursor (Sn/NPC) and the product (Sb/NPC) are characterized by XRD, FTIR, TGA, UV/Vis, SEM, and AFM. Cyclic voltammetry, chronoamperometry, and electrochemical impedance studies are used to investigate the electrochemical performance of Sb/NPC-GCE. Sb/NPC-GCE detects albumin at physiological pH of 7.4 in the potential range 0.92 V and 0.09 V for oxidation and reduction, respectively. LOD and recovery of Sb/NPC-GCE for the determination of albumin are 0.13 ng.mL^-1 and 66.6 ± 0.97-100 ± 2.73%, respectively. Chronoamperometry of the modified working electrode demonstrates its stability for 14 h, indicating its reusability and reproducibility. Sb/NPC-GCE is a selective sensor for albumin detection in the presence of interfering species. The electrode has been applied for albumin detection in human serum samples of HCC patients. A negative correlation of albumin with alpha-fetoprotein levels in HCC patients is observed by statistical analysis.

Developing a simple box-behnken experimental design on the removal of doxorubicin anticancer drug using Fe3O4/graphene nanoribbons adsorbent

This paper aims to develop a Box-Behnken experimental design system to optimize the removal process of doxorubicin anticancer drugs. For this goal, Fe₃O₄/graphene nanoribbons was selected as adsorbent and removal of doxorubicin anticancer drug optimized using Box-Behnken experimental design with a selection of four effective factors. A three-level, four-factor Box-Behnken experimental design was used to assess the relationship between removal percentage as a dependent variable with adsorption weight (0.0015-0.01 mg), pH (3-9), temperature (15-45 °C) and time (1-15 min) as independent variables. Optimized condition by Behnken experimental design (pH = 7.36; time = 15 min; adsorbent weight = 0.01 mg and temperature = 29.26 °C) improved removal of doxorubicin anticancer drug about 99.2% in aqueous solution. The dynamic behavior, adsorption properties and mechanism of doxorubicin molecule on Fe₃O₄/graphene nanoribbon were investigated based on ab initio molecular dynamics (AIMD) simulations and density functional theory calculations with dispersion corrections. A closer inspection of the adsorption configurations and binding energies revealed that π-π interactions were the driving force when the doxorubicin molecule adsorbed on Fe₃O₄/graphene nanoribbon. The observed negative adsorption energy signifies a favourable and exothermic adsorption process of the various adsorbate-substrate systems. Besides, AIMD and phonon dispersion calculations confirm the dynamic stability of Fe₃O₄/graphene nanoribbon.