Acidithiobacillus ferrooxidans and its potential application

Iron at the helm: Steering arsenic speciation through redox processes in soils

The toxicity and bioavailability of arsenic (As) in soils are largely determined by its speciation. Iron (Fe) is widely present in soils with a strong affinity for As, and therefore the environmental behaviors of As and Fe oxides (including oxides, hydrates and hydrated oxides) are closely correlated with each other. The redox fluctuations of Fe driven by changes in the environment can significantly affect As speciation and its fate in soils. The interaction between Fe and As has garnered widespread attention, and the adsorption mechanisms of As by Fe oxides have also been well-documented. However, there is still a lack of systematic understanding of how Fe redox dynamics affects As speciation depending on the soil environmental conditions. In this review, we summarize the mechanisms for As speciation transformation and redistribution, as well as the role of environmental factors in the main Fe redox processes in soils. These processes include the biotic Fe oxidation mediated by Fe-oxidizing bacteria, abiotic Fe oxidation by oxygen or manganese oxides, dissimilatory Fe reduction mediated by Fe-reducing bacteria, and Fe(II)-catalyzed transformation of Fe oxides. This review contributes to a deeper understanding of the environmental behaviors of Fe and As in soils, and provides theoretical guidance for the development of remediation strategies for As-contaminated soils.

Bioleaching as an Eco-Friendly Nano-Factory for Sustainable Inorganic Waste Management: Current Advancements, Challenges, and Opportunities

Inorganic waste management and metal recovery technology pose significant challenges to the global research community and policymakers. Bioleaching is an economical, eco-friendly, and sustainable technology used for extracting metals and nanoparticles from inorganic waste streams, including e-waste, fly ash, ore, spent batteries, and petroleum catalysts. Valuable metals are recovered from these waste materials by microbial action. Bioleaching occurs by redoxolysis, acidolysis, and complexolysis processes. The present review provides insights into global trends and hazards of e-waste while also discussing the bioleaching of metals and nanoparticles from various inorganic wastes. In addition, the review focuses on the mechanistic pathway of the bioleaching process and computational aspects, such as the response surface method employed for enhanced recovery of metals from solid waste materials. Various physicochemical and biological parameters influencing metal bioleaching, as well as economic impacts and challenges affecting the bioleaching of metals from solid wastes, are discussed.

Magnetic field-assisted bioleaching of cathode materials from spent Li-ion batteries using Acidithiobacillus ferrooxidans

A relatively weak static magnetic field with field strength is externally applied during the growth of using Acidithiobacillus ferrooxidans and subsequent bioleaching of spent Li-ion batteries (LIBs) to recover Li, Ni, Co, and Mn. 5 mT is the optimal field strength which allows 100 % Li to be recovered from a commercial black mass containing Li[Ni0.6Co0.2Mn0.2]O2 after 3 days of leaching. 85 % Ni, 95 % Co, and 100 % Mn are also recovered as dissolved in biogenic H2SO4 after 3 days. Without the external magnetic field, the leaching efficiency is limited to 20-40 % after the same leaching period. It is shown that the magnetic state of the substrate largely influences bioleaching efficiency since the magnetic enhancement is observed only from paramagnetic and ferromagnetic materials through improved cell attachment and not from antiferromagnetic materials. The proposed magnetic field-assisted bioleaching of spent LIBs using A. ferrooxidans can help the recycling of raw materials back into the circular economy for LIBs.

Site Directed Mutagenesis of the Cyc2 Outer Membrane Protein from Acidithiobacillus ferrooxidans Reveals a Critical Role for Bound Iron Atoms in Extracellular Electron Transfer

Extracellular electron transfer (EET) processes by metal respiratory bacteria rely on outer membrane proteins (OMPs) to exchange electrons across the insulating cell membrane. The most studied OMPs from metal reducing bacteria contain multiple sequential heme groups. However, many iron-oxidizing bacteria, including the industrial bioleaching microbe Acidithiobacillus ferrooxidans, contain monoheme OMPs and the mechanism of electron transfer through these smaller structures has not been elucidated. Computational modeling was previously used to predict two iron ion binding sites in the Cyc2 protein structure from A. ferrooxidans. To determine if these binding sites are critical for protein function, the monoheme Cyc2 OMP from A. ferrooxidans is recombinantly expressed in E. coli outer membrane vesicles (OMVs) which are then incorporated into biomimetic cell-membrane supported lipid bilayers (SLB) on electrodes to measure electron transfer. Site-directed mutagenesis is used to disrupt the putative ion binding sites predicted from modeling to elucidate the mechanism. It is confirmed that the Cyc2 protein is capable of EET without the need for soluble iron or other accessory proteins. These results confirm the critical role of bound metal ions in the A. ferrooxidans EET mechanism, and it is expected that homologous monoheme OMPs will have similar conduction pathways.

Comparative genomics analysis of the reason for 12C6+ heavy-ion irradiation in improving Fe3O4 nanoparticle yield of Acidithiobacillus ferrooxidans

The Fe3O4 nanoparticle synthesized by Acidithiobacillus ferrooxidans have a broad practical value, while the low yield limits their commercial application. Herein, we employed a 12C6+ heavy-ion beam to induce mutagenesis of A. ferrooxidans BYM and successfully screened a mutant BYMT-200 with a 1.36 mg/L Fe3O4 nanoparticle yield, which could stably inherit over many generations based on assessing cell magnetism and Fe3O4 nanoparticle synthesis. Comparative genome analysis detected 14 mutation sites, causing six synonymous mutations, one missense mutation, and one nonsense mutation. We further annotated the genes involved in the mutation, such as hcp, hsdM, yghU, K7B00_11365, and K7B00_11355, which are responsible for the substantial changes in the Fe3O4 nanoparticle yield of A. ferrooxidans. Additionally, we performed a pan-genome analysis to understand how these genes regulate Fe3O4 nanoparticle synthesis. The core genome of 2376 orthologous clusters was identified and visualized by progressive Mauve alignment and OrthoVenn. A total of 109 regulatory genes related to iron metabolism were identified, mainly involved in electron transport, iron acquisition, iron storage, and oxidative stress. The mutant genes are closely related to iron-sulfur clusters and oxidative stress. Accordingly, we proposed a hypothetical mechanism for increasing Fe3O4 nanoparticle production in A. ferrooxidans BYMT-200 to withstand high oxidative stress caused by heavy ion radiation. Our study offers significant theoretical guidance for further acquiring the high-yield Fe3O4 nanoparticle-producing bacteria and studying the mechanism of its synthesis.

Biogeochemical cycles of iron: Processes, mechanisms, and environmental implications

The iron (Fe) biogeochemical cycle is critical for abiotic and biological environmental processes that overlap spatially and may compete with each other. The development of modern molecular biology technologies promoted the understanding of the electron transport mechanisms of Fe-cycling-related microorganisms. Recent studies have revealed a novel pathway for microaerophilic ferrous iron (Fe(II))-oxidizers in extracellular Fe(II) oxidation. In addition, OmcS, OmcZ, and OmcE nanowires on the cell surface have been shown to promote electron transfer between microorganisms and their environment. These processes affect the fate of pollutants in directly or indirectly ways, such as greenhouse gas emissions. In this review, these advances and the environmental implications of the Fe cycle process were discussed, with a particular focus on the mechanisms of intracellular or extracellular electron transport in microorganisms.

Arthropods in soil reclamation and bioremediation: Functional roles, mechanisms and future perspective

Soil arthropods are a diverse group of invertebrates that play pivotal roles in nutrient cycling, decomposition, soil structure formation, and regulation of soil biodiversity. Understanding the ecological significance of soil arthropods and their interactions with other soil organisms is crucial. This review paper examines the potential of arthropods in improving soil health and quality, with a specific focus on their relevance in acidic, saline/alkaline, and contaminated soils. The paper investigates the interactions between arthropods and their associated microbiomes, their contributions to soil physical and chemical properties, their influence on nutrient cycling and organic matter mineralization, as well as their role as indicators of soil health due to their sensitivity to environmental changes. Furthermore, the review explores how arthropods enhance the activities of microorganisms, such as bacteria, fungi, and yeast, which employ molecular mechanisms to remediate heavy metal contamination in soils. Lastly, the paper addresses key challenges and future directions for utilizing soil arthropods in the restoration of environmentally friendly soils.

Metagenomic analysis reveals enhanced sludge dewaterability through acidified sludge inoculation: Regulation of Fe (II) oxidation electron transport pathway

The bioleaching utilizing indigenous microbial inoculation can continuously improve the dewaterability of sludge. In this study, metagenomic analysis was innovative employed to identify the key microorganisms and functional genes that affect the dewatering performance of sludge in the bioleaching conditioning process. The results demonstrated that long-term repeated inoculation of acidified sludge resulted in increased abundance of many functional genes associated with the transport of carbohydrate and amino acid. Additionally, genes encoding key iron transport proteins (such as afuA, fhuC, and fhuD) and genes related to electron transfer carriers in ferrous iron oxidation process (such as rus and cyc2) were significantly enriched, thereby promoting the improvement of sludge dewatering performance through enhanced iron oxidation. Notably, Acidithiobacillus, Betaproteobacteria, and Hyphomicrobium were the major sources of functional genes. This study reveals the microscopic mechanisms underlying the improvement of sludge dewaterability through bioleaching based on mixed culture from a novel perspective of gene metabolism.

Kinetic, electrochemical and spectral characterization of bacterial and archaeal rusticyanins; unexpected stability issues and consequences for applications in biotechnology

Motivated by the ambition to establish an enzyme-driven bioleaching pathway for copper extraction, properties of the Type-1 copper protein rusticyanin from Acidithiobacillus ferrooxidans (AfR) were compared with those from an ancestral form of this enzyme (N0) and an archaeal enzyme identified in Ferroplasma acidiphilum (FaR). While both N0 and FaR show redox potentials similar to that of AfR their electron transport rates were significantly slower. The lack of a correlation between the redox potentials and electron transfer rates indicates that AfR and its associated electron transfer chain evolved to specifically facilitate the efficient conversion of the energy of iron oxidation to ATP formation. In F. acidiphilum this pathway is not as efficient unless it is up-regulated by an as of yet unknown mechanism. In addition, while the electrochemical properties of AfR were consistent with previous data, previously unreported behavior was found leading to a form that is associated with a partially unfolded form of the protein. The cyclic voltammetry (CV) response of AfR immobilized onto an electrode showed limited stability, which may be connected to the presence of the partially unfolded state of this protein. Insights gained in this study may thus inform the engineering of optimized rusticyanin variants for bioleaching processes as well as enzyme-catalyzed solubilization of copper-containing ores such as chalcopyrite.

Metabolic engineering strategies to enable microbial electrosynthesis utilization of CO2: recent progress and challenges

Microbial electrosynthesis (MES) is a promising technology that mainly utilizes microbial cells to convert CO2 into value-added chemicals using electrons provided by the cathode. However, the low electron transfer rate is a solid bottleneck hindering the further application of MES. Thus, as an effective strategy, genetic tools play a key role in MES for enhancing the electron transfer rate and diversity of production. We describe a set of genetic strategies based on fundamental characteristics and current successes and discuss their functional mechanisms in driving microbial electrocatalytic reactions to fully comprehend the roles and uses of genetic tools in MES. This paper also analyzes the process of nanomaterial application in extracellular electron transfer (EET). It provides a technique that combines nanomaterials and genetic tools to increase MES efficiency, because nanoparticles have a role in the production of functional genes in EET although genetic tools can subvert MES, it still has issues with difficult transformation and low expression levels. Genetic tools remain one of the most promising future strategies for advancing the MES process despite these challenges.

Taxonomic Diversity and Functional Traits of Soil Bacterial Communities under Radioactive Contamination: A Review

Studies investigating the taxonomic diversity and structure of soil bacteria in areas with enhanced radioactive backgrounds have been ongoing for three decades. An analysis of data published from 1996 to 2024 reveals changes in the taxonomic structure of radioactively contaminated soils compared to the reference, showing that these changes are not exclusively dependent on contamination rates or pollutant compositions. High levels of radioactive exposure from external irradiation and a high radionuclide content lead to a decrease in the alpha diversity of soil bacterial communities, both in laboratory settings and environmental conditions. The effects of low or moderate exposure are not consistently pronounced or unidirectional. Functional differences among taxonomic groups that dominate in contaminated soil indicate a variety of adaptation strategies. Bacteria identified as multiple-stress tolerant; exhibiting tolerance to metals and antibiotics; producing antioxidant enzymes, low-molecular antioxidants, and radioprotectors; participating in redox reactions; and possessing thermophilic characteristics play a significant role. Changes in the taxonomic and functional structure, resulting from increased soil radionuclide content, are influenced by the combined effects of ionizing radiation, the chemical toxicity of radionuclides and co-contaminants, as well as the physical and chemical properties of the soil and the initial bacterial community composition. Currently, the quantification of the differential contributions of these factors based on the existing published studies presents a challenge.

Characterize the Growth and Metabolism of Acidithiobacillus ferrooxidans under Electroautotrophic and Chemoautotrophic Conditions

Acidophiles are capable of surviving in extreme environments with low pH. Acidithiobacillus ferrooxidans is a typical acidophilic bacterium that has been extensively studied when grown chemoautotrophically, i.e., when it derives energy from oxidation of Fe2+ or reduced inorganic sulfur compounds (RISCs). Although it is also known to grow with electrons supplied by solid electrodes serving as the sole source of energy, the understanding of its electroautotrophic growth is still limited. This study aimed to compare the growth characteristics of A. ferrooxidans under electroautotrophic (ea) and chemoautotrophic (ca) conditions, with an attempt to elucidate the possible mechanism(s) of extracellular electron flow into the cells. Jarosite was identified by Raman spectroscopy, and it accumulated when A. ferrooxidans used Fe2+ as the electron donor, but negligible mineral deposition occurred during electroautotrophic growth. Scanning electron microscopy (SEM) showed that A. ferrooxidans possesses more pili and extracellular polymeric substances (EPSs) under electroautotrophic conditions. A total of 493 differentially expressed genes (DEGs) were identified, with 297 genes being down-regulated and 196 genes being up-regulated in ea versus ca conditions. The genes known to be essential for chemoautotrophic growth showed a decreased expression in the electroautotrophic condition; meanwhile, there was an increased expression of genes related to direct electron transfer across the cell's outer/inner membranes and transmembrane proteins such as pilin and porin. Joint analysis of DEGs and differentially expressed metabolites (DEMs) showed that galactose metabolism is enhanced during electroautotrophic growth, inducing A. ferrooxidans to produce more EPSs, which aids the cells in adhering to the solid electrode during their growth. These results suggested that electroautotrophy and chemoautotrophy of A. ferrooxidans have different extracellular electron uptake (EEU) pathways, and a model of EEU during electroautotrophic growth is proposed. The use of extracellular electrons as the sole energy source triggers A. ferrooxidans to adopt metabolic and subsequently phenotypic modifications.

Comparison of bioleaching of a sulfidic copper ore (chalcopyrite) in column percolators and in stirred-tank bioreactors including microbial community analysis

Chalcopyrite is the most abundant Cu-sulfide and economically the most important copper mineral in the world. It is known to be recalcitrant in hydrometallurgical processing and therefore chalcopyrite bioleaching has been thoroughly studied for improvement of processing. In this study, the microbial diversity in 22 samples from the Sarcheshmeh copper mine in Iran was investigated via 16S rRNA gene sequencing. In total, 1063 species were recognized after metagenomic analysis including the ferrous iron- and sulfur-oxidizing acidophilic genera Acidithiobacillus, Leptospirillum, Sulfobacillus and Ferroplasma. Mesophilic as well as moderately thermophilic acidophilic ferrous iron- and sulfur-oxidizing microorganisms were enriched from these samples and bioleaching was studied in shake flask experiments using a chalcopyrite-containing ore sample from the same mine. These enrichment cultures were further used as inoculum for bioleaching experiments in percolation columns for simulating heap bioleaching. Addition of 100 mM NaCl to the bioleaching medium was assessed to improve the dissolution rate of chalcopyrite. For comparison, bioleaching in stirred tank reactors with a defined microbial consortium was carried out as well. While just maximal 32% copper could be extracted in the flask bioleaching experiments, 73% and 76% of copper recovery was recorded after 30 and 10 days bioleaching in columns and bioreactors, respectively. Based on the results, both, the application of moderately thermophilic acidophilic bacteria in stirred tank bioreactors, and natural enrichment cultures of mesoacidophiles, with addition of 100 mM NaCl in column percolators with agglomerated ore allowed for a robust chalcopyrite dissolution and copper recovery from Sarcheshmeh copper ore via bioleaching.

Phenomic and transcriptomic analyses reveal the sequential synthesis of Fe3O4 nanoparticles in Acidithiobacillus ferrooxidans BYM

IMPORTANCE

As the most important non-magnetotactic magnetosome-producing bacteria, Acidithiobacillus ferrooxidans only requires very mild conditions to produce Fe3O4 nanoparticles, thus conferring greater flexibility and potential application in biomagnetic nanoparticle production. However, the available information cannot explain the mechanism of Fe3O4 nanoparticle formation in A. ferrooxidans. In this study, we applied phenomic and transcriptomic analyses to reveal this mechanism. We found that different treatment condition factors notably affect the phenomic data of Fe3O4 nanoparticle in A. ferrooxidans. Using transcriptomic analyses, the gene network controlling/regulating Fe3O4 nanoparticle biogenesis in A. ferrooxidans was proposed, excavating the candidate hub genes for Fe3O4 nanoparticle formation in A. ferrooxidans. Based on this information, a sequential model for Fe3O4 nanoparticle synthesis in A. ferrooxidans was hypothesized. It lays the groundwork for further clarifying the feature of Fe3O4 nanoparticle synthesis.

From Genes to Bioleaching: Unraveling Sulfur Metabolism in Acidithiobacillus Genus

Sulfur oxidation stands as a pivotal process within the Earth's sulfur cycle, in which Acidithiobacillus species emerge as skillful sulfur-oxidizing bacteria. They are able to efficiently oxidize several reduced inorganic sulfur compounds (RISCs) under extreme conditions for their autotrophic growth. This unique characteristic has made these bacteria a useful tool in bioleaching and biological desulfurization applications. Extensive research has unraveled diverse sulfur metabolism pathways and their corresponding regulatory systems. The metabolic arsenal of the Acidithiobacillus genus includes oxidative enzymes such as: (i) elemental sulfur oxidation enzymes, like sulfur dioxygenase (SDO), sulfur oxygenase reductase (SOR), and heterodisulfide reductase (HDR-like system); (ii) enzymes involved in thiosulfate oxidation pathways, including the sulfur oxidation (Sox) system, tetrathionate hydrolase (TetH), and thiosulfate quinone oxidoreductase (TQO); (iii) sulfide oxidation enzymes, like sulfide:quinone oxidoreductase (SQR); and (iv) sulfite oxidation pathways, such as sulfite oxidase (SOX). This review summarizes the current state of the art of sulfur metabolic processes in Acidithiobacillus species, which are key players of industrial biomining processes. Furthermore, this manuscript highlights the existing challenges and barriers to further exploring the sulfur metabolism of this peculiar extremophilic genus.

AI-driven pan-proteome analyses reveal insights into the biohydrometallurgical properties of Acidithiobacillia

Microorganism-mediated biohydrometallurgy, a sustainable approach for metal recovery from ores, relies on the metabolic activity of acidophilic bacteria. Acidithiobacillia with sulfur/iron-oxidizing capacities are extensively studied and applied in biohydrometallurgy-related processes. However, only 14 distinct proteins from Acidithiobacillia have experimentally determined structures currently available. This significantly hampers in-depth investigations of Acidithiobacillia's structure-based biological mechanisms pertaining to its relevant biohydrometallurgical processes. To address this issue, we employed a state-of-the-art artificial intelligence (AI)-driven approach, with a median model confidence of 0.80, to perform high-quality full-chain structure predictions on the pan-proteome (10,458 proteins) of the type strain Acidithiobacillia. Additionally, we conducted various case studies on de novo protein structural prediction, including sulfate transporter and iron oxidase, to demonstrate how accurate structure predictions and gene co-occurrence networks can contribute to the development of mechanistic insights and hypotheses regarding sulfur and iron utilization proteins. Furthermore, for the unannotated proteins that constitute 35.8% of the Acidithiobacillia proteome, we employed the deep-learning algorithm DeepFRI to make structure-based functional predictions. As a result, we successfully obtained gene ontology (GO) terms for 93.6% of these previously unknown proteins. This study has a significant impact on improving protein structure and function predictions, as well as developing state-of-the-art techniques for high-throughput analysis of large proteomic data.

Molecular Identification and Acid Stress Response of an Acidithiobacillus thiooxidans Strain Isolated from Rio Tinto (Spain)

Acidithiobacillus thiooxidans is of paramount importance in the development of biomining technologies. Being widely recognized as an extreme acidophile, extensive research has been dedicated to understanding its significant role in the extraction of several ores in recent years. However, there still exist significant molecular uncertainties surrounding this species. This study focuses on developing a taxonomic assignment method based on the sequencing of the 16S-5S rRNA cluster, along with a qPCR-based technology enabling precise growth determination. Additionally, an approach to understanding its response to acid stress is explored through RT-PCR and MALDI-TOF analysis. Our findings indicate that when subjected to pH levels below 1, the cell inhibits central (carbon fixation and metabolism) and energy (sulfur metabolism) metabolism, as well as chaperone synthesis, suggesting a potential cellular collapse. Nevertheless, the secretion of ammonia is enhanced to raise the environmental pH, while fatty acid synthesis is upregulated to reinforce the cell membrane.

Removal of antimonite and antimonate in aqueous solution by mugwort biochar modified by Acidithiobacillus ferrooxidans after pyrolysis

In the research, iron oxides-biochar composites (ALBC) were prepared from pristine biochar modified by Acidithiobacillus ferrooxidans (A. ferrooxidans) and pyrolyzed at 500 °C and 700 °C in order to remove antimonite (Sb(III)) and antimonate (Sb(V)) from water. The results indicated that biochar prepared at 500 °C and 700 °C (ALBC500 and ALBC700) were loaded with Fe₂O₃ and Fe₃O₄, respectively. In bacterial modification systems, ferrous iron and total iron concentrations decreased continuously. The pH values of bacterial modification systems including ALBC500 increased first and then decreased to a stable state, while the pH values of bacterial modification systems with ALBC700 continued to decrease. The bacterial modification systems can facilitate the formation of more jarosites by A. ferrooxidans. ALBC500 had optimal adsorbing capacities for Sb(III) (18.81 mg·g^-1) and Sb(V) (14.64 mg·g^-1). The main mechanisms of Sb(III) and Sb(V) adsorption by ALBC were electrostatic interaction and pore filling.

Multi-Objective Optimization of Copper Bioleaching: Comparative Study of Pure and Co-Cultured Cultivation

Background

Bioleaching is a practical method to recover metals from low-grade mineral sulfides. The most frequent bacteria involved in the bioleaching of metals from ores are Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Experimental design is a method through which the optimum activity condition will be obtained, avoiding numerous trials and errors.

Objectives

This study aimed to optimize the bioleaching condition of two indigenous iron- and sulfur-oxidizing bacteria from the Meydouk mine, Iran, and evaluate their function in a semi-pilot operation in pure and mixed cultures.

Material and Methods

After treatment with sulfuric acid, the bacterial DNA was extracted, and further 16S rRNA was sequenced to characterize the bacterial species. The cultivation condition of these bacteria was optimized using Design-expert (6.1.1 version) software. The copper recovery rate and the differentiation in the ORP rate in the percolation columns were also investigated. These strains were isolated from the Meydouk mine for the first time.

Results

16S rRNA analysis revealed that both bacteria belong to the Acidithiobacillus genus. The factors with the most significant impact on Acidithiobacillus ferrooxidans with their optimum level were temperature=35 °C, pH=2.5, and initial FeSO₄ concentration=25 g.L^-1. Also, initial sulfur concentration had the most significant impact on Acidithiobacillus thiooxidans with the optimum level of 35 g.L^-1. Moreover, the mixed culture determined higher bioleaching efficiency compared with the case of employing the pure cultures.

Conclusions

Utilizing a mixture of both bacteria, Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans elevated the Cu recovery rate due to the synergetic function of the strains. Also, introducing an initial dosage of sulfur and pre-acidification could elevate metal recovery efficiency.

Eurypsychrophilic acidophiles: From (meta)genomes to low-temperature biotechnologies

Low temperature and acidic environments encompass natural milieus such as acid rock drainage in Antarctica and anthropogenic sites including drained sulfidic sediments in Scandinavia. The microorganisms inhabiting these environments include polyextremophiles that are both extreme acidophiles (defined as having an optimum growth pH < 3), and eurypsychrophiles that grow at low temperatures down to approximately 4°C but have an optimum temperature for growth above 15°C. Eurypsychrophilic acidophiles have important roles in natural biogeochemical cycling on earth and potentially on other planetary bodies and moons along with biotechnological applications in, for instance, low-temperature metal dissolution from metal sulfides. Five low-temperature acidophiles are characterized, namely, Acidithiobacillus ferriphilus, Acidithiobacillus ferrivorans, Acidithiobacillus ferrooxidans, “Ferrovum myxofaciens,” and Alicyclobacillus disulfidooxidans, and their characteristics are reviewed. Our understanding of characterized and environmental eurypsychrophilic acidophiles has been accelerated by the application of “omics” techniques that have aided in revealing adaptations to low pH and temperature that can be synergistic, while other adaptations are potentially antagonistic. The lack of known acidophiles that exclusively grow below 15°C may be due to the antagonistic nature of adaptations in this polyextremophile. In conclusion, this review summarizes the knowledge of eurypsychrophilic acidophiles and places the information in evolutionary, environmental, biotechnological, and exobiology perspectives.

Impact of Fulvic Acid and Acidithiobacillus ferrooxidan Inoculum Amount on the Formation of Secondary Iron Minerals

The catalytic oxidation of Fe²⁺ by Acidithiobacillus ferrooxidan (A. ferrooxidans) and the synthesis of iron sulfate-based secondary minerals is considered to be of great significance to the treatment of acid mine drainage (AMD). Along these lines, in this work, the shaker experiment was carried out to study the underlying mechanism of the inoculation amount of fulvic acid (FA) and A. ferrooxidans on the synthesis process of secondary minerals. From the acquired results, it was demonstrated that the oxidation rate of Fe²⁺ increased with the increase in the concentration of fulvic acid in the range of 0.1-0.2 g/L. On top of that, the concentration of fulvic acid in the range of 0.3-0.5 g/L inhibited the activity of A. ferrooxidans. However, A. ferrooxidans retained its activity, and the complete oxidation time of Fe²⁺ was delayed. When the concentration of fulvic acid was 0.3 g/L, the TFe (total iron) precipitation efficiency was 30.2%. Interestingly, when 0.2 g/L fulvic acid was added to different inoculum systems, the incorporation of a higher inoculum amount of A. ferrooxidans led to an increased oxidation rate. On the contrary, the lower inoculum amount yielded a more obvious effect of the fulvic acid. From the mineralogical characteristics, it was also revealed that a fulvic acid concentration of 0.2 g/L and different inoculation amounts of A. ferrooxidans did not change the mineral facies, whereas pure schwertmannite was obtained.

Effects of Initial pH and Carbonate Rock Dosage on Bio-Oxidation and Secondary Iron Mineral Synthesis

The effect of pH is a key factor in biomineralization mediated by Acidithiobacillus ferrooxidans to promote the transformation of Fe into secondary iron minerals. This study aimed to investigate the effects of initial pH and carbonate rock dosage on bio-oxidation and secondary iron mineral synthesis. Variations in pH and the concentrations of Ca²⁺, Fe²⁺, and total Fe (TFe) in the growth medium of A. ferrooxidans were examined in the laboratory to determine how they affect the bio-oxidation process and secondary iron mineral synthesis. The results showed that in systems with an initial pH of 1.8, 2.3, and 2.8, the optimum dosages of carbonate rock were 30, 10, and 10 g, respectively, which significantly improved the removal rate of TFe and the amount of sediments. At an initial pH of 1.8 and a carbonate rock dosage of 30 g, the final removal rate of TFe reached 67.37%, which was 28.03% higher than that of the system without the addition of carbonate rock, and 36.9 g·L^-1 of sediments were generated, which was higher than that of the system without the addition of carbonate rock (6.6 g·L^-1). Meanwhile, the number of sediments generated by adding carbonate rock were significantly higher than those without the addition of carbonate rock. The secondary minerals were characterized by a progressive transition from low crystalline assemblages composed of calcium sulfate and subordinated jarosite, to well crystal-line assemblages composed of jarosite, calcium sulfate, and goethite. These results have important implications for comprehensively understanding the dosage of carbonate rock in mineral formation under different pH conditions. The findings help reveal the growth of secondary minerals during the treatment of AMD using carbonate rocks under low-pH conditions, which offers valuable information for combining the carbonate rocks with secondary minerals to treat AMD.

Magnetosome yield characteristics modeling of acidithiobacillus ferrooxidans in airlift bioreactor using response surface methodology

Bacterial magnetosomes had been proved to have great application potential in medicine and biotechnology. The objective of the present study was to obtain high yield of magnetosomes from Acidithiobacillus ferrooxidans (A. ferrooxidans) BYM in an airlift bioreactor using response surface methodology (RSM). The magnetosomes from A. ferrooxidans BYM were characterized using a transmission electron microscope and scanning electron microscopy. The maximum magnetosome yield of 0.4267 mg/L was achieved at ventilation capacity of 3.6 L/min and gluconic acid concentration of 10 mmol/L at 25^oC. The correlation coefficient (R²) value of 0.8676 of the obtained model suggested a good correlation between the actual and predicted magnetosome yield. The confirmation experiment confirmed that the actual magnetosome yield of 0.391 mg/L obtained were in agreement with the predicted value of 0.398 mg/L. These results suggested that RSM can be employed to find out the optimum conditions for magnetosome formation in airlift bioreactor.

A review on the bioleaching of toxic metal(loid)s from contaminated soil: Insight into the mechanism of action and the role of influencing factors

The anthropogenic activities in agriculture, industrialization, mining, and metallurgy combined with the natural weathering of rocks, have led to severe contamination of soils by toxic metal(loid)s. In an attempt to remediate these polluted sites, a plethora of conventional approaches such as Solidification/Stabilization (S/S), soil washing, electrokinetic remediation, and chemical oxidation/reduction have been used for the immobilization and removal of toxic metal(loid)s in the soil. However, these conventional methods are associated with certain limitations. These limitations include high operational costs, high energy demands, post-waste disposal difficulties, and secondary pollution. Bioleaching has proven to be a promising alternative to these conventional approaches in removing toxic metal(loid)s from contaminated soil as it is cost-effective, environmentally friendly, and esthetically pleasing. The bioleaching process is influenced by factors including pH, temperature, oxygen, and carbon dioxide supply, as well as nutrients in the medium. It is crucial to monitor these parameters before and throughout the reaction since a change in any, for instance, pH during the reaction, can alter the microbial activity and, therefore, the rate of metal leaching. However, research on these influencing factors and recent innovations has brought significant progress in bioleaching over the years. This critical review, therefore, presents the current approaches to bioleaching and the mechanisms involved in removing toxic metal(loid)s from contaminated soil. We further examined and discussed the fundamental principles of various influencing factors that necessitate optimization in the bioleaching process. Additionally, the future perspectives on adding omics for bioleaching as an emerging technology are discussed.

Acidithiobacillus sp. applied to sewage sludge bioleaching: perspectives for process optimization through the establishment of optimal operational parameters

Using Acidithiobacillus sp. during bioleaching assays is a well-known biological approach to solubilizing metals within sewage sludge. However, sludge dewatering has also been reported as a secondary treatment benefit. Based on a literature review, the present work provides perspectives regarding the enhancement of bioleaching outcomes on a laboratory scale by establishing optimal operational parameters. Data from different studies suggest that greater bioleaching efficiency may be achieved using a 10% (v/v) mixed inoculum of Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans in a ratio of 4:1, supplemented with ferrous sulfate (FeSO4) and elemental sulfur (S0), and an initial system pH near 6.0. However, operational parameters must be established according to the type of sludge being treated due to differences in their compositions. Bioleaching duration is also an aspect that must be considered since treatments conducted for longer than 48 h increased the concentration of Extracellular Polymeric Substances (EPS), a characteristic associated with reducing dewaterability performance.

Genetic engineering of extremely acidophilic Acidithiobacillus species for biomining: Progress and perspectives

With global demands for mineral resources increasing and ore grades decreasing, microorganisms have been increasingly deployed in biomining applications to recover valuable metals particularly from normally considered waste, such as low-grade ores and used consumer electronics. Acidithiobacillus are a genus of chemolithoautotrophic extreme acidophiles that are commonly found in mining process waters and acid mine drainage, which have been reported in several studies to aid in metal recovery from bioremediation of metal-contaminated sites. Compared to conventional mineral processing technologies, biomining is often cited as a more sustainable and environmentally friendly process, but long leaching cycles and low extraction efficiency are main disadvantages that have hampered its industrial applications. Genetic engineering is a powerful technology that can be used to enhance the performance of microorganisms, such as Acidithiobacillus species. In this review, we compile existing data on Acidithiobacillus species' physiological traits and genomic characteristics, progresses in developing genetic tools to engineer them: plasmids, shutter vectors, transformation methods, selection markers, promoters and reporter systems developed, and genome editing techniques. We further propose genetic engineering strategies for enhancing biomining efficiency of Acidithiobacillus species and provide our perspectives on their future applications.

A newly-constructed bifunctional bacterial consortium for removing butyl xanthate and cadmium simultaneously from mineral processing wastewater: Experimental evaluation, degradation and biomineralization

Due to the technological limitations associated with beneficiation technology, large amounts of flotation reagents and heavy metals remain in mineral processing wastewater. Unfortunately, however, no treatment methods are available to mitigate the resulting pollution by them. In this study, a bacterial consortium SDMC (simultaneously degrade butyl xanthate and biomineralize cadmium) was constructed in an effort to simultaneously degrade butyl xanthate (BX) and biomineralize cadmium (Cd) by screening and domesticating two different bacterial species including Hypomicrobium and Sporosarcina. SDMC is efficient in removing the combined pollution due to BX and Cd with a 100% degradation rate for BX and 99% biomineralization rate for Cd within 4 h. Besides, SDMC can tolerate high concentrations of Fe(III) (0-40 mg/L). It has an excellent ability to utilize Fe(III) for enhanced removal of the combined pollutants. SDMC can effectively remove pollutants with a pH range of 6-9. Further, we discussed pathways for potential degradation and biomineralization: Cd(BX)₂-Cd²⁺, BX^-; BX^--CS₂, butyl perxanthate (BPX); Cd²⁺-(Ca0.67,Cd0.33)CO₃. The removal of the combined pollutants primarily entails decomposition, degradation, and biomineralization, C-O bond cleavage, and microbially induced carbonate precipitation (MICP). SDMC is a simple, efficient, and eco-friendly bifunctional bacterial consortium for effective treatment of BX-Cd combined pollution in mineral processing wastewater.

Green Recycling Methods to Treat Lithium-Ion Batteries E-Waste: A Circular Approach to Sustainability

E-waste generated from end-of-life spent lithium-ion batteries (LIBs) is increasing at a rapid rate owing to the increasing consumption of these batteries in portable electronics, electric vehicles, and renewable energy storage worldwide. On the one hand, landfilling and incinerating LIBs e-waste poses environmental and safety concerns owing to their constituent materials. On the other hand, scarcity of metal resources used in manufacturing LIBs and potential value creation through the recovery of these metal resources from spent LIBs has triggered increased interest in recycling spent LIBs from e-waste. State of the art recycling of spent LIBs involving pyrometallurgy and hydrometallurgy processes generates considerable unwanted environmental concerns. Hence, alternative innovative approaches toward the green recycling process of spent LIBs are essential to tackle large volumes of spent LIBs in an environmentally friendly way. Such evolving techniques for spent LIBs recycling based on green approaches, including bioleaching, waste for waste approach, and electrodeposition, are discussed here. Furthermore, the ways to regenerate strategic metals post leaching, efficiently reprocess extracted high-value materials, and reuse them in applications including electrode materials for new LIBs. The concept of "circular economy" is highlighted through closed-loop recycling of spent LIBs achieved through green-sustainable approaches.

Bacterial Biosorbents, an Efficient Heavy Metals Green Clean-Up Strategy: Prospects, Challenges, and Opportunities

Rapid industrialization has led to the pollution of soil and water by various types of contaminants. Heavy metals (HMs) are considered the most reactive toxic contaminants, even at low concentrations, which cause health problems through accumulation in the food chain and water. Remediation using conventional methods, including physical and chemical techniques, is a costly treatment process and generates toxic by-products, which may negatively affect the surrounding environment. Therefore, biosorption has attracted significant research interest in the recent decades. In contrast to existing methods, bacterial biomass offers a potential alternative for recovering toxic/persistent HMs from the environment through different mechanisms for metal ion uptake. This review provides an outlook of the advantages and disadvantages of the current bioremediation technologies and describes bacterial groups, especially extremophiles with biosorbent potential for heavy metal removal with relevant examples and perspectives.

In situ bio/chemical characterization of Venus cloud particles using Life-signature Detection Microscope for Venus (Venus LDM)

Much of the information about the size and shape of aerosols forming haze and the cloud layer of Venus is obtained from indirect inferences from nephelometers on probes and from analysis of the variation of polarization with the phase angle and the glory feature from images of Venus. Microscopic imaging of Venus' aerosols has been advocated recently. Direct measurements from a fluorescence microscope can provide information on the morphology, density, and biochemical characteristics of the particles; thus, the fluorescence microscope is attractive for the in situ particle characterization of Venus' cloud layer. Fluorescence imaging of Venus' cloud particles presents several challenges due to the sulfuric acid composition and the corrosive effects. In this article, we identify the challenges and describe our approach to overcoming them for a fluorescence microscope based on an in situ bio/chemical and physical characterization instrument for use in the clouds of Venus from a suitable aerial platform. We report that a pH adjustment using alkali was effective for obtaining fluorescence images, and that fluorescence attenuation was observed after the adjustment, even when the acidophile suspension in the concentrated sulfuric acid was used as a sample.

Harnessing electrical-to-biochemical conversion for microbial synthesis

Electrical-to-biochemical conversion (E2BC) drives cell metabolism for biosynthesis and has become a promising way to realize green biomanufacturing. This review discusses the following aspects: 1. the natural E2BC processes and their underlying E2BC mechanism; 2. development of artificial E2BC for tunable microbial electrosynthesis; 3. design of electrobiochemical systems using self-powered, light-assisted, and nano-biohybrid approaches; 4. synthetic biology methods for efficient microbial electrosynthesis. This review also compares E2BC with electrocatalysis-biochemical conversion (EC2BC), as both strategies may lead to future carbon negative green biomanufacturing.

Preparation, characterization, and in vitro release kinetics of doxorubicin-loaded magnetosomes

The doxorubicin (DOX) was successfully coupled to the magnetosomes from Acidithiobacillus ferrooxidans (At. ferrooxidans) by genipin bridging. The parameters (magnetosome concentration, DOX concentration, genipin concentration-, and cross-link time) expected for temperature significantly influenced the coupling rate. Bacterial magnetosome-doxorubicin complexes (BMDCs) were characterized by transmission electron microscope (TEM), particle size analyzer and Fourier transform infrared spectroscopy. Results indicated that BMDCs exhibited a mean particle size of 83.98 mm and displayed a negative charge. The chemical reaction occurring between CO and NH group and the physical adsorption predominated by electrostatic interaction were found to involve in coupling. BMDCs can release 40% of DOX in simulated gastrointestinal conditions within 38 h. Kinetic models including Higuchi, Korsmeyer-Peppas, Zero order, First order, Hixon-Crowell, Baker-Lonsdale, and Weibull and Gompertz were utilized to explore the release mechanism of DOX from BMDCs. All models were found to fit well (r² ≥ 0.8144) with the release data and the Gompertz was the best fit model (r² = 0.9742), implying that the complex mechanisms involving Fickian and Gompertz diffusion contributed to the release. These findings suggested that magnetosomes from At. ferrooxidans have great potential applications in biomedical and clinical fields as the carrier of target drug delivery systems in the future.

A review on the recycling of spent lithium-ion batteries (LIBs) by the bioleaching approach

This review discusses the latest trend in recovering valuable metals from spent lithium-ion batteries (LIBs) to meet the technological world's critical metal demands. Spent LIBs are a secondary source of valuable metals such as Li (5%-7%), Ni (5%-10%), Co (5%-25%), Mn (5-11%), and non-metal graphite. Recycling is essential for the battery industry to extract valuable critical metals from secondary sources to develop new and novel high-tech LIBs for various applications such as eco-friendly technologies, renewable energy, emission-free electric vehicles, and energy-saving lightings. LIB waste is currently undergoing high-temperature pyrometallurgical or hydrometallurgical processes to recover valuable metals, and these processes have proven to be successful and feasible. These methods, however, are not preferable due to the difficulties in controlling the process, secondary waste produced, high operational cost, and high risk of scaling up. Biotechnological approaches can be promising alternatives to pyrometallurgical and hydrometallurgical technologies in metal recovery from LIB waste. Microbiological metal dissolution or bioleaching has gained popularity for metal extraction from ores, concentrates, and recycled or residual materials in recent years. This technology is eco-friendly, safe to handle, and reduces operating costs and energy demands. The pre-treatment process (material preparation), microorganisms used in the bioleaching of LIBs, factors influencing the bioleaching process, methods of enhancing the leaching efficiency, regeneration of electrode materials, and future aspects have been discussed in detail.

Effect of ferrous iron loading on dewaterability, heavy metal removal and bacterial community of digested sludge by Acidithiobacillus ferrooxidans

Acidithiobacillus ferrooxidans ILS-2 was adapted in digested sludge and used to treat sludge for dewaterability improvement. Results showed that increasing ferrous iron loading increased sludge dewaterability, but the inoculation of the bioleaching strain had little effect on sludge dewaterability compared to controls without the strain. The total extracellular polymeric substances (EPS) contents of sludges with and without bioleaching treatment were similar except for bioleaching treatment at 10% ferrous iron loading (on sludge total solids) where total EPS was higher with bioleaching treatment. However, bioleaching treatment for 48 h had a notable effect on removal of heavy metals, such as Mn, Ni and Zn, especially at the high loadings of ferrous iron. In the presence of A. ferrooxidans, the removal of Ni, Mn and Zn reached 93%, 88% and 80%, respectively, at a ferrous iron loading of 21%. The sequencing of 16S rRNA genes indicated that increasing ferrous iron loadings to 15% and 21% increased the relative abundance of Acidithiobacillus, Acidocella (with A. ferrooxidans) and Carboxylicivirga (without A. ferrooxidans) but decreased the abundance of Pseudomonas and Acinetobacter after 48 h treatment. This study enhanced the understanding of the correlations between bioleaching treatment of digested sludge, sludge dewaterability, heavy metal removal and bacterial communities.

Recent progress in the application of omics technologies in the study of bio-mining microorganisms from extreme environments

Bio-mining microorganisms are a key factor affecting the metal recovery rate of bio-leaching, which inevitably produces an extremely acidic environment. As a powerful tool for exploring the adaptive mechanisms of microorganisms in extreme environments, omics technologies can greatly aid our understanding of bio-mining microorganisms and their communities on the gene, mRNA, and protein levels. These omics technologies have their own advantages in exploring microbial diversity, adaptive evolution, changes in metabolic characteristics, and resistance mechanisms of single strains or their communities to extreme environments. These technologies can also be used to discover potential new genes, enzymes, metabolites, metabolic pathways, and species. In addition, integrated multi-omics analysis can link information at different biomolecular levels, thereby obtaining more accurate and complete global adaptation mechanisms of bio-mining microorganisms. This review introduces the current status and future trends in the application of omics technologies in the study of bio-mining microorganisms and their communities in extreme environments.

Bioleaching of iron from laterite soil using an isolated Acidithiobacillus ferrooxidans strain and application of leached laterite iron as Fenton's catalyst in selective herbicide degradation

A novel isolated strain Acidithiobacillus ferrooxidans BMSNITK17 has been investigated for its bioleaching potential from lateritic soil and the results are presented. System conditions like pH, feed mineral particle size, pulp density, temperature, rotor speed influences bioleaching potential of Acidithiobcillus ferrooxidans BMSNITK17 in leaching out iron from laterite soil. Effect of sulfate addition on bioleaching efficiency is studied. The bioleached laterite iron (BLFe's) on evaluation for its catalytic role in Fenton's oxidation for the degradation of ametryn and dicamba exhibits 94.24% of ametryn degradation and 92.45% of dicamba degradation efficiency. Fenton's oxidation performed well with the acidic pH 3. The study confirms the role of Acidithiobacillus ferrooxidans in leaching iron from lateritic ore and the usage of bioleached lateritic iron as catalyst in the Fenton's Oxidation.

Exploration of intrinsic peroxidase-like activity of Acidithiobacillus ferrooxidans spent medium and its application for glutathione detection

Acidithiobacillus ferrooxidans (At. ferrooxidans) is a bacterium that has the ability to metabolize iron. It converts Fe²⁺ into Fe³⁺ during its metabolic cycle. Hence, the At. ferrooxidans spent medium is rich in Fe³⁺. The presence of Fe³⁺ contributes to a peroxidase-like activity. Therefore, in this study, an attempt has been made to explore the peroxidase-like activity of the At. ferrooxidans spent medium. It has been observed that the At. ferrooxidans spent medium oxidized 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H₂O₂). The effect of various process parameters on the peroxidase-like activity has been studied. Optimum peroxidase-like activity is achieved using 5 µl of the spent medium, 0.3 mM TMB concentration, 4 mM H₂O₂ concentration, 4.2 pH, and 40 °C temperature. The peroxidase-like activity of the At. ferrooxidans spent medium has been used to develop a colorimetric assay for detection of glutathione (GSH). GSH inhibits the peroxidase-like activity of the At. ferrooxidans spent medium in a concentration range of 0-1 mM. The limit of detection (LOD) of GSH, obtained using the calibration plot is 0.69 mM. The developed assay is selective toward GSH, as the presence of amino acids, metals, and sugars have shown a negligible effect on the GSH sensing ability.

Complete Genome Sequence Analysis of Acidithiobacillus ferrivorans XJFY6S-08 Reveals Environmental Adaptation to Alpine Acid Mine Drainage

The present work reported the complete genome sequence analysis of Acidithiobacillus ferrivorans strain XJFY6S-08 isolated from acid mine drainage in Fuyun copper mine in Xinjiang, China, revealing the potential for extreme environmental adaptation. The strain XJFY6S-08 possesses 3,161,380 bp in length and 56.55% GC content. Genomic analysis revealed that this strain harbors metal-tolerant genes coding for the mer operon, arsRBC operon and a variety of metal assimilation and efflux proteins. Genes coding for K⁺/H⁺ transporting ATPase and the Na⁺/H⁺ antiporter gene nhaA for pH adaptation were identified. The presence of genes associated with various DNA repair enzymes and the synthesis of mycosporine-like amino acids precursor support the UVR resistance mechanisms. The genes related to membrane modifications (ppiBCD, slyD, surA, cfa and fabF) and resistance-nodulation-division (RND) family can play a crucial role in organic solvents tolerance. The strain XJFY6S-08 resists low-temperature conditions by a set of mechanisms such as changes of RNA metabolism, transmembrane transport, compatible solutes and transport, biofilm and EPS formation, chemotaxis and motility and ROS scavenging. These findings can provide important information for further studying the comparative genome and environmental adaptation mechanism of A. ferrivorans.

RNA transcript response by an Acidithiobacillus spp. mixed culture reveals adaptations to growth on arsenopyrite

Biooxidation of gold-bearing refractory mineral ores such as arsenopyrite (FeAsS) in stirred tanks produces solutions containing highly toxic arsenic concentrations. In this study, ferrous iron and inorganic sulfur-oxidizing Acidithiobacillus strain IBUN Ppt12 most similar to Acidithiobacillus ferrianus and inorganic sulfur compound oxidizing Acidithiobacillus sp. IBUNS3 were grown in co-culture during biooxidation of refractory FeAsS. Total RNA was extracted and sequenced from the planktonic cells to reveal genes with different transcript counts involved in the response to FeAsS containing medium. The co-culture's response to arsenic release during biooxidation included the ars operon genes that were independently regulated according to the arsenopyrite concentration. Additionally, increased mRNA transcript counts were identified for transmembrane ion transport proteins, stress response mechanisms, accumulation of inorganic polyphosphates, urea catabolic processes, and tryptophan biosynthesis. Acidithiobacillus spp. RNA transcripts also included those encoding the Rus and PetI proteins involved in ferrous iron oxidation and gene clusters annotated as encoding inorganic sulfur compound metabolism enzymes. Finally, mRNA counts of genes related to DNA methylation, management of oxidative stress, chemotaxis, and motility during biooxidation were decreased compared to cells growing without mineral. The results provide insights into the adaptation of Acidithiobacillus spp. to growth during biooxidation of arsenic-bearing sulfides.

Hydroxyl, Fe2+, and Acidithiobacillus ferrooxidans Jointly Determined the Crystal Growth and Morphology of Schwertmannite in a Sulfate-Rich Acidic Environment

Schwertmannite, ubiquitously found in iron and sulfate-rich acid mine drainage, is generated via biological oxidation of ferrous ions by Acidithiobacillus ferrooxidans (A. ferrooxidans). However, little information on the mechanisms of biogenic schwertmannite formation and crystal growth is available. This study deliberately investigated the relationships among mineral morphology, solution chemistry, and phase transformation of schwertmannite in A. ferrooxidans-containing ferrous sulfate solutions. The formation of schwertmannite could be divided into three stages. In the first nucleation stage, crystallites are presented as nonaggregative or aggregative forms via a successive polymerization process. In the second stage, ellipsoidal aggregates, which are identified as ferrihydrite and/or schwertmannite, are formed. In the third stage, needles appear on the surface of ellipsoidal aggregates, which is caused by the phase transformation of ferrihydrite or schwertmannite to lepidocrocite and goethite through a Fe2+ (aq) catalysis-driven pathway. After three stages, a typical characteristic "hedgehog" morphology finally appears. In addition, A. ferrooxidans could significantly speed up the mineral transformation. Solution pH affects the morphology of schwertmannite by acid leaching. The experimental results also reveal that the formation of schwertmannite depend on the content of hydroxyl complexes or the transformation of the monomers to polymers, which are greatly affected by the solution pH.

Genomic Analysis of a Newly Isolated Acidithiobacillus ferridurans JAGS Strain Reveals Its Adaptation to Acid Mine Drainage

Acidithiobacillus ferridurans JAGS is a newly isolated acidophile from an acid mine drainage (AMD). The genome of isolate JAGS was sequenced and compared with eight other published genomes of Acidithiobacillus. The pairwise mutation distance (Mash) and average nucleotide identity (ANI) revealed that isolate JAGS had a close evolutionary relationship with A. ferridurans JCM18981, but whole-genome alignment showed that it had higher similarity in genomic structure with A. ferrooxidans species. Pan-genome analysis revealed that nine genomes were comprised of 4601 protein coding sequences, of which 43% were core genes (1982) and 23% were unique genes (1064). A. ferridurans species had more unique genes (205–246) than A. ferrooxidans species (21–234). Functional gene categorizations showed that A. ferridurans strains had a higher portion of genes involved in energy production and conversion while A. ferrooxidans had more for inorganic ion transport and metabolism. A high abundance of kdp, mer and ars genes, as well as mobile genetic elements, was found in isolate JAGS, which might contribute to its resistance to harsh environments. These findings expand our understanding of the evolutionary adaptation of Acidithiobacillus and indicate that A. ferridurans JAGS is a promising candidate for biomining and AMD biotreatment applications.

Bioleaching of Iron, Copper, Lead, and Zinc from the Sludge Mining Sediment at Different Particle Sizes, pH, and Pulp Density Using Acidithiobacillus ferrooxidans

Globally, the amounts of metal ore deposits have been declining, so the research directions investigating the extraction of metals from materials that are classified as waste are gaining more importance every year. High concentrations of Cu, Pb, Zn, and Fe were analyzed in the sludge sediment (Zlaté Hory, Czech Republic), which is a waste product of the mining industry. In the bioleaching process, bacterial cells have been established as being able to convert metals from solid to liquid phase. However, the most important parameters of bioleaching are particle size, pH, and pulp density, thus our research focused on their optimization. The acidophilic and mesophilic bacteria Acidithiobacillus ferrooxidans were applied due to the high Fe content in the sample. The recovery of metals in the leachate was determined by F-AAS and the residual metal concentrations in the waste fraction were analyzed by XRF. The grain size fractions <40 µm –200 µm were investigated. The atomic absorption spectrometry (AAS) results show that the highest Fe (76.48%), Cu (82.01%), and Pb (88.90%) recoveries were obtained at particle size of 71–100 μm. Zn was dissolved for all fractions above 90%. Experiments with different pH values were performed at a pH of 1.6–2.0. The highest dissolution rates of Zn, Fe, and Cu were achieved with a suspension pH of 1.8, where 98.73% of Zn, 85.42% of Fe, and 96.44% of Cu were recovered. Due to the high percentage dissolution of metals, experiments were performed under pilot conditions in a bioreactor at a pulp density of 2.5% and 4.2% (w/v). From an economic point of view, the leaching time of 28 days was evaluated as sufficient.

Biological materials formed by Acidithiobacillus ferrooxidans and their potential applications

A variety of biological materials including schwertmannite, jarosite, iron-sulfur cluster (ISC) and magnetosomes can be produced by Acidithiobacillus ferrooxidans (A. ferrooxidans). Their possible formation mechanisms involved in iron transformation, iron transport, and electron transfer were proposed. The schwertmannite formation usually occurs under the pH of 2.0-3.51, and a lower or higher pH will promote jarosite to be produced. Available Fe2+ in the environment and the carrier proteins that can transport Fe2+ to the intracellular membranes of A. ferrooxidans play a critical role in the synthesis of magnetosomes and ISC. The potential applications of these biological materials were reviewed, including removal of heavy metal by schwertmannite, detoxification of toxic species by jarosite, the transference of electron and ripening the iron sulfur protein by ISC, and biomedical application of magnetosomes. Additionally, some perspectives for the molecular mechanisms of synthesis and regulation of these biomaterials were briefly described.

Extremophilic Microorganisms for the Treatment of Toxic Pollutants in the Environment

As concerns about the substantial effect of various hazardous toxic pollutants on the environment and public health are increasing, the development of effective and sustainable treatment methods is urgently needed. In particular, the remediation of toxic components such as radioactive waste, toxic heavy metals, and other harmful substances under extreme conditions is quite difficult due to their restricted accessibility. Thus, novel treatment methods for the removal of toxic pollutants using extremophilic microorganisms that can thrive under extreme conditions have been investigated during the past several decades. In this review, recent trends in bioremediation using extremophilic microorganisms and related approaches to develop them are reviewed, with relevant examples and perspectives.

An overview on heavy metal resistant microorganisms for simultaneous treatment of multiple chemical pollutants at co-contaminated sites, and their multipurpose application

Anthropogenic imbalance of chemical pollutants in environment raises serious threat to all life forms. Contaminated sites often possess multiple heavy metals and other types of pollutants. Elimination of chemical pollutants at co-contaminated sites is imperative for the safe ecosystem functions, and simultaneous removal approach is an attractive scheme for their remediation. Different conventional techniques have been applied as concomitant treatment solution but fall short at various parameters. In parallel, use of microorganisms offers an innovative, cost effective and ecofriendly approach for simultaneous treatment of various chemical pollutants. However, microbiostasis due to harmful effects of heavy metals or other contaminants is a serious bottleneck facing remediation practices in co-contaminated sites. But certain microorganisms have unique mechanisms to resist heavy metals, and can act on different noxious wastes. Considering this significant, my review provides information on different heavy metal resistant microorganisms for bioremediation of different chemical pollutants, and other assistance. In this favour, the integrated approach of simultaneous treatment of multiple heavy metals and other environmental contaminants using different heavy metal resistant microorganisms is summarized. Further, the discussion also intends toward the use of heavy metal resistant microorganisms associated with industrial and environmental applications, and healthcare. PREFACE: Simultaneous treatment of multiple chemical pollutants using microorganisms is relatively a new approach. Therefore, this subject was not well received for review before. Also, multipurpose application of heavy metal microorganisms has certainly not considered for review. In this regard, this review attempts to gather information on recent progress on studies on different heavy metal resistant microorganisms for their potential of treatment of co-contaminated sites, and multipurpose application.

Microbe-Mediated Extracellular and Intracellular Mineralization: Environmental, Industrial, and Biotechnological Applications

Microbe-mediated mineralization is ubiquitous in nature, involving bacteria, fungi, viruses, and algae. These mineralization processes comprise calcification, silicification, and iron mineralization. The mechanisms for mineral formation include extracellular and intracellular biomineralization. The mineral precipitating capability of microbes is often harnessed for green synthesis of metal nanoparticles, which are relatively less toxic compared with those synthesized through physical or chemical methods. Microbe-mediated mineralization has important applications ranging from pollutant removal and nonreactive carriers, to other industrial and biomedical applications. Herein, the different types of microbe-mediated biomineralization that occur in nature, their mechanisms, as well as their applications are elucidated to create a backdrop for future research.