High-touch surfaces: microbial neighbours at hand

Facile Spray-Coating of Antimicrobial Silica Nanoparticles for High-Touch Surface Protection

The rising threat from infectious pathogens poses an ever-growing challenge. Metal-based nanomaterials have gained a great deal of attention as active components in antimicrobial coatings. Here, we report on the development of readily deployable, sprayable antimicrobial surface coatings for high-touch stainless steel surfaces that are ubiquitous in many healthcare facilities to combat the spread of pathogens. We synthesized mesoporous silica nanoparticles (MSNs) with different surface functional groups, namely, amine (MSN-NH2), carboxy (MSN-COOH), and thiol groups (MSN-SH). These were chosen specifically due to their high affinity to copper and silver ions, which were used as antimicrobial payloads and could be incorporated into the mesoporous structure through favorable host-guest interactions, allowing us to find the most favorable combinations to achieve antimicrobial efficacy against various microbes on dry or semidry high-touch surfaces. The antimicrobial MSNs were firmly immobilized on stainless steel through a simple two-step spray-coating process. First, the stainless steel surfaces are primed with sprayable polyelectrolyte solutions acting as adhesion layers, and then, the loaded nanoparticle dispersions are spray-coated on top. The employed polyelectrolytes were selected and functionalized specifically to adhere well to stainless steel substrates while at the same time being complementary to the MSN surface groups to enhance the adhesion, wettability, homogeneity, and stability of the coatings. The antimicrobial properties of the nanoparticle suspension and the coatings were tested against three commonly found pathogenic bacteria, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, as well as a fungal pathogen, Candida albicans. Especially MSN-SH loaded with silver ions showed excellent antimicrobial efficacy against all tested pathogens under application-relevant, (semi)dry conditions. The findings obtained here facilitate our understanding of the correlation between the surface properties, payloads, and antimicrobial activity and show a new pathway toward simple and easily deployable solutions to combat the spread of pathogens with the help of sprayable antimicrobial surface coatings.

Antiviral Surface Coatings: From Pandemic Lessons to Visible-Light-Activated Films

The increasing need for effective antiviral strategies has led to the development of innovative surface coatings to combat the transmission of viruses via fomites. The aim of this review is to critically assess the efficacy of antiviral coatings in mitigating virus transmission, particularly those activated by visible light. The alarm created by the COVID-19 pandemic, including the initial uncertainty about the mechanisms of its spread, attracted attention to fomites as a possible source of virus transmission. However, later research has shown that surface-dependent infection mechanisms need to be carefully evaluated experimentally. By briefly analyzing virus-surface interactions and their implications, this review highlights the importance of shifting to innovative solutions. In particular, visible-light-activated antiviral coatings that use reactive oxygen species such as singlet oxygen to disrupt viral components have emerged as promising options. These coatings can allow for obtaining safe, continuous, and long-term active biocidal surfaces suitable for various applications, including healthcare environments and public spaces. This review indicates that while the significance of fomite transmission is context-dependent, advances in material science provide actionable pathways for designing multifunctional, visible-light-activated antiviral coatings. These innovations align with the lessons learned from the COVID-19 pandemic and pave the way for sustainable, broad-spectrum antiviral solutions capable of addressing future public health challenges.

Solid-State Precipitation of Silver Nanoparticles Nucleated during Al Anodizing: Mechanism and Antibacterial Properties

This study presents an innovative approach to creating antibacterial aluminum surfaces by combining the antibacterial properties of silver nanoparticles (Ag NPs) with the nanoarchitecture of anodized aluminum oxide in one step. An Al-Ag alloy containing 10 wt % Ag was synthesized and anodized in 0.3 M oxalic acid. Ag NPs precipitated in the solid state during anodization, resulting in a porous nanocomposite structure. Comprehensive characterization using SEM, TEM, and EDS revealed a 43 μm thick oxide layer with uniformly distributed nanopores of approximately 100 nm in diameter. Ag NPs with diameters ranging from 2 to 14 nm precipitated dispersed on the surface, inside pores, and within the Al2O3 matrix. Antibacterial properties were evaluated against Escherichia coli. The anodized Al-Ag surface demonstrated robust antibacterial activity after short incubation times (up to 1 × 108 CFU/ml after 3 h). The enhanced antibacterial properties are attributed to the optimal size and distribution of Ag NPs and the potential physical bactericidal effect of the nanoporous structure. This strategy for the precipitation of Ag NPs in the solid state could be used to fabricate high-touch surfaces in hospitals.

Review of state regulations related to environmental sanitation in long-term care facilities

BACKGROUND

We examined how state regulations for long-term care facilities address environmental sanitation.

METHODS

State regulations for nursing homes and assisted living facilities across all 50 US states and the District of Columbia were sourced from government Web sites. We searched using key terms about environmental sanitation and then quantified our findings to answer 4 questions.

RESULTS

More states required infection preventionists in nursing homes (29 states) than in assisted living facilities (14 states). References for environmental service workers appeared more frequently in nursing home regulations (22 states) than in assisted living regulations (6 states). Infection control training was required more often in nursing homes (32 states) than in assisted living facilities (27 states). Gloves were the most common personal protective equipment cited, addressed in 14 state nursing home regulations and 13 state-level assisted living regulations. Only 7 state nursing home regulations and 2 assisted living regulations addressed carpet, with only 6 addressing high-touch items.

CONCLUSIONS

State regulations inadequately address environmental service workers, staff training, carpets, and high-touch items. These regulatory gaps could pose significant risks to long-term care residents if infection control policies and procedures rely solely on regulatory requirements.

Efficacy of copper-impregnated antimicrobial surfaces against Clostridioides difficile spores

OBJECTIVE

Clostridioides difficile (C. difficile) is one of the most common causes of healthcare-associated infections (HAIs). Elimination of C. difficile spores is difficult as they are resistant to common hospital-grade disinfectants. Copper-impregnated surfaces provide continuous reduction of multiple pathogens, potentially lowering the risk of infections. This manuscript aims to evaluate the efficacy of copper-impregnated surfaces on C. difficile spores.

METHODS

Control (no copper) coupons and copper coupons containing 20% copper-oxide were inoculated with C. difficile spore loads ranging from 105 to 107 spores, with or without 5% fetal bovine serum soil load. After 4 hours of contact time, the C. difficile spores were recovered, plated on C. difficile growth media, and colony forming units were counted. The efficacy of copper (log10 kill) was estimated using a Bayesian latent variables model.

RESULTS

After 4 hours, unsoiled copper bedrail and copper table coupons at mean spore inoculation resulted in a 97.3% and 96.8% reduction in spore count (1.57 and 1.50 log10 kill, respectively). That of soiled bedrail and table coupons showed a 91.8% and 91.7% reduction (1.10 and 1.10 log10 kill, respectively).

CONCLUSIONS

Copper coupons can substantially reduce C. difficile spores after 4 hours, but results vary depending on the initial spore concentration and presence or absence of organic material. Higher initial spore loads or excess organic material may prevent spores from contact with copper surfaces, thus decreasing kill efficacy. Continuous sporicidal effect of copper-impregnated surfaces may decrease spore burden and help prevent transmission of spores.

Enhanced Effect of Patient Room Disinfection Against Carbapenem-Resistant Enterobacter cloacae and Methicillin-Resistant Staphylococcus aureus Using UV-C Irradiation in Conjunction with UV-C Containment Unit

Background/Objectives: In environments with high-frequency contact surfaces, drug-resistant bacteria, such as carbapenem-resistant Enterobacterales and methicillin-resistant Staphylococcus aureus (MRSA), can survive for extended periods, contributing to healthcare-associated infections. Ultraviolet (UV)-C irradiation often fails to adequately disinfect shadowed areas, leading to a persistent contamination risk. We evaluated the effectiveness of using a UV-C containment unit (UVCCU) in conjunction with UV-C irradiation to improve the sterilization effects on both direct and indirect surfaces, including shadowed areas, and to assess the leakage of UV radiation to the surroundings. Methods: In a model patient room, agar media inoculated with carbapenem-resistant Enterobacter cloacae and MRSA were placed at multiple locations on direct and indirect surfaces around the bed. We used the UV-C irradiation system, UVDI-360, to irradiate the bedroom-environment surfaces with and without a UVCCU. The reduction in bacterial colony counts with and without the UVCCU was measured by counting colony-forming units and calculating the log reduction values, and the UV radiation leakage outside the UVCCU was measured. Results: The use of the UVCCU led to a significant reduction in MRSA colony counts, even in shadowed areas that had previously been inadequately disinfected (with the UVCCU: 2.7 [2.7-2.8]; without the UVCCU: 0.6 [0.5-0.7]; p < 0.01). Additionally, the use of the UVCCU kept the UV radiation leakage to the surrounding environment within regulated limits. Conclusions: These findings suggest that a UVCCU can enhance the disinfection efficacy for multidrug-resistant organisms on healthcare environmental surfaces. The portability and ease of use of the UVCCU indicate its promise as an auxiliary device for UV-C disinfection in healthcare settings.

Microorganisms isolated from thermoplastic masks and storage racks in head and neck cancer patients with radiation dermatitis

Healthcare-associated infections (HAIs) remain a critical public health issue, as they contribute to prolonged treatment duration, increased healthcare costs, and heightened risks of morbidity and mortality. In head and neck cancer patients undergoing radiotherapy, thermoplastic masks (TMs), which come into direct contact with the skin, represent a potential vector for infection. Additionally, the storage racks where these masks are kept may also facilitate microorganism transmission. Our study aimed to isolate and identify microorganisms from infective skin lesions secondary to radiation dermatitis in head and neck cancer patients, as well as from the TMs and storage racks, and to evaluate the antibiotic resistance profiles of the isolated microorganisms. The study included 71 locally advanced head and neck cancer patients who underwent radiotherapy between August 2022 and November 2023. Patients were monitored daily, and their skin evaluations were made according to Common Terminology Criteria for Adverse Events (CTCAE) version 4.0. Grade 2 and 3 radiodermatitis was observed in 29 of these 71 patients. Samples were collected using sterile swabs from the skin lesions on the head and neck area, the inner surfaces of the TM, and the storage rack from 29 patients. Samples were inoculated into enrichment and selective media. After the growing microorganisms were identified, antimicrobial susceptibility was evaluated using conventional methods and automated systems according to the European Committee on Antimicrobial Susceptibility Testing (EUCAST) criteria. At least one type of microorganism was isolated from the skin samples of infected patients, and double growth was detected in two patients. Among the samples, 2 were methicillin-resistant coagulase-negative Staphylococcus (MRCNS), 1 was methicillin-resistant Staphylococcus aureus (MRSA), 1 was Candida albicans (C. albicans), 15 were methicillin-sensitive coagulase-negative Staphylococcus (MSCNS), 1 was methicillin-sensitive Staphylococcus aureus (MSSA), 1 was Bacillus subspecies (Bacillus spp.) and 3 were Corynebacterium diphtheriae (C. diphtheriae). Coagulase-negative Staphylococcus strains were isolated from the skin of 14 of 19 patients with grade 2 radiation dermatitis, whereas CNS strains were isolated from only 2 of 10 patients with grade 3 radiation dermatitis. Among the gram-negative bacteria, 3 Pseudomonas aeruginosa (P. aeruginosa), 2 Enterobacter cloacae (E. cloacae), 1 Klebsiella pneumoniae (K. pneumoniae) and 1 Moraxella catarrhalis (M. catarrhalis) strain were isolated. Sixteen (55.1%) of the TMs used in 29 patients and 20 (68.9%) of the storage racks harbored microorganisms, including HAI agents and flora bacteria. Bacteria colonize TMs and storage racks where they are risk factors for secondary skin infections in radiation dermatitis lesions that develop on the skin of head and neck cancer patients. Decontamination procedures should be meticulously applied to surfaces such as TMs and their storage racks during the course of radiotherapy.

Efficacy and Impact of a Cleaning and Disinfection Protocol for Musical Instruments Used in Music Therapy Services in ICUs: A Prospective Cohort Study

BACKGROUND

Health care-associated infections (HAIs) can affect patient safety and recovery. Musical instruments used by music therapy services may carry pathogens, particularly in ICUs. The aim of this study was to determine the efficacy of the cleaning and disinfection protocol by the music therapy service of the University Hospital Fundación Santa Fe de Bogotá.

METHODS

This prospective cohort study included all ICU music therapy patients from July to August 2023. Adenosine triphosphate (ATP) bioluminescence tests and microbiological cultures were taken before and after cleaning the musical instruments for nine patients in the adult and pediatric ICUs. ATPs were taken before starting music therapy, after finishing music therapy, and after cleaning the instruments. Cultures were taken if an ATP test was above the established cutoff of ≤ 200 relative light units (RLUs). If no ATP value was above the cutoff, cultures were taken randomly.

RESULTS

A total of 63 ATPs and 10 random microbiological cultures were taken. After applying the cleaning and disinfection protocol, all ATP values were ≤ 200 RLUs. Of the 10 microbiological cultures, 1 screened positive for Streptococcus sp., yeast, and Micrococcus. One hundred ICU music therapy patients were followed up, and positive associations with HAIs were found for age (p = 0.01), type of unit (p = 0.001), tracheostomy (p < 0.001), arterial line (p = 0.005), hemodialysis catheter (p = 0.05), bladder catheter (p = 0.02), number of invasive devices (p = 0.02), duration use of invasive devices (p = 0.01), and days of hospitalization (p = 0.01). Number of music therapy sessions/patient was not associated with HAIs (p = 0.86).

CONCLUSION

The results indicate that the current cleaning and disinfection protocol can be considered safe and effective. To the authors' knowledge, this is one of the first studies investigating biosafety of musical instruments in a hospital-based music therapy service. Patient safety is of the utmost importance in hospital settings, and awareness about proper cleaning of their work tools among music therapists is paramount.

Environmental contamination with carbapenem resistant Acinetobacter baumannii in healthcare settings in Fiji: a potential source of infection

Introduction

There are multiple ongoing outbreaks of carbapenem resistant Acinetobacter baumannii (CRAb) infection in Fiji's hospitals. CRAb is able to colonize and persist on various hospital surfaces for extended periods. We conducted a study to understand the extent of hospital environmental contamination and phylogenetic links with clinical isolates.

Methods

Swabs were collected from high-touch surfaces at Colonial War Memorial Hospital (CWMH) September 2021 and December 2022; Lautoka Hospital (LTKH) August 2022; and Labasa Hospital (LBSH) November 2022. All bacterial isolates were identified, and antimicrobial susceptibility testing (AST) performed; isolates resistant to carbapenems and producing a carbapenemase underwent whole genome sequencing. Comparison was made to clinical isolates obtained from CWMH in 2016-2017 and 2019-2021 and from LTKH and LBSH from 2020-2021.

Results

From the 180 environmental samples collected, ten (5.6%) CRAb were isolated; no other carbapenem-resistant gram-negative organisms were isolated. Seven (70%) of the CRAb were isolated from CWMH and three (30%) from LTKH; no CRAb were isolated from LBSH. Of the seven CWMH CRAb, two were sequence type 2 (ST2), three ST25, and two ST499. All LTKH isolates were ST499. The two environmental CRAb ST2 isolates were closely genetically linked to isolates obtained from patients in CWMH, LTKH, and LBSH 2020-2021. Similarly, the three environmental CRAb ST25 isolates were closely genetically linked to isolates obtained from patients admitted to CWMH in 2019-2021 and LBSH in 2020. The environmental CRAb ST499 isolates represented two distinct clones, with clone 1 comprising two genetically identical isolates from CWMH and clone 2 the three isolates from LTKH. Although no genetic linkages were observed when comparing environmental ST499 isolates to those from CWMH patients in 2020-2021, both clone 1 isolates were genetically identical to an isolate obtained from a patient admitted during the sampling period.

Conclusion

Our study highlights the contamination of high-touch surfaces within Fiji hospitals with CRAb, suggesting that these may serve as important sources for CRAb. Phylogenetic linkages to CRAb isolated from patients since 2019 underscores the persistence of this resistant pathogen in hospital settings and the ongoing risk for hospital-acquired infections.

Synergistic Polymer Coatings with Antibacterial and Antiviral Properties for Healthcare Applications

The role of frequently touched surfaces in the transmission of infectious diseases is well-documented, and the urgent need for effective surface technologies with antipathogen activity has been highlighted by the recent global pandemic and rise in antimicrobial resistance. Here, we have explored combinations of up to 3 different classes of compounds within a polymeric matrix to enable the fabrication of coatings with broad-spectrum activity. Compounds were either based on metals or metal oxides, namely, copper, silver, and copper oxide, essential oils, namely, cinnamaldehyde, tea tree oil, and carvacrol oil, or cationic polymers, namely, poly(ε-lysine) and poly(hexamethylene biguanide). These compounds were mixed into a polymer matrix, coated, and dried to yield durable coatings. Coatings containing up to 7.5% (w/w) of the compounds were assessed in the zone of inhibition and biofilm assays using Staphylococcus aureus and Pseudomonas aeruginosa, as well as infectivity assays using human coronavirus OC43. Our data demonstrate that a selected combination of additives was able to provide a 5-log reduction in the colony-forming units of both bacteria and a 4-log reduction in viral infectivity. This simple but highly effective technology is expected to find applications in environments such as hospitals, aged care facilities, or public transport.

Nanomaterials for Photothermal Antimicrobial Surfaces

Microbial infection diseases are a major threat to human health and have become one of the main causes of mortality. The search for novel antimicrobial strategies is an important challenge for the scientific community, considering also the constant increase of antimicrobial resistance and the rise of new diseases. Among the new strategies to combat microbial infections, the photothermal effect seems to be one of the most promising. Hyperthermia is an effective and broad spectrum strategy for the removal of microbial infections. Among all of the strategies to reduce the diffusion of microbial infections, the preparation of antimicrobial surfaces seems of primary importance. In many cases, in fact, an infection can be diffused through surfaces just by touching them, or by inoculating microbes through an internalizable device, such as an implant, a prosthesis, or a catheter. In this review, we will summarize the recent advances in the preparation of photothermal antibacterial surfaces.

Abundance and diversity of methicillin-resistant bacteria from bathroom surfaces at workplaces using CHROMagar media, 16S, and dnaJ gene sequence typing

University campus communities consist of dynamic and diverse human populations originated from different regions of the country or the world. Their national/global movement to and from campus may contribute to the spread and buildup of methicillin-resistant (MR) bacteria, including MR Staphylococci (MRS) on high-touch surfaces, sinks, and toilets. However, studies on MR bacteria contamination of surfaces, sinks, and toilets are scarce in workplaces outside of healthcare settings. Hence, little is known whether university communities contaminate campus bathrooms by MR bacteria. This study evaluated the abundance, identity, and phylogenetics of MR bacteria grown on CHROMagar MRSA media from bathrooms at workplaces. We collected 21 sink and 21 toilet swab samples from 10 buildings on campus and cultured them on CHROMagar MRSA media, extracted DNA from MR bacteria colonies, sequenced PCR products of 16S and dnaJ primers, determined the sequence identities by BLAST search, and constructed a phylogenetic tree. Of 42 samples, 57.1% (24/42) harbored MR bacteria. MR bacteria were more prevalent on the sink (61.9%) than in the toilet (52.2%) and in male bathrooms (54.2%) than in female bathrooms (41.7%). The colony count on the bathroom surfaces of 42 samples varied in that 42.9% (18/42), 33.3, 14.3, and 9.5% of samples harbored 0, 100, and > 1000 MR bacteria colonies, respectively. Of MR bacteria sequenced, BLAST search and phylogenetic analysis showed that Staphylococcus accounted for 60% of the MR bacteria and the rest were non-Staphylococci. Of Staphylococcus carrying MR (n = 15), 53.3% were S. hemolyticus followed by S. lugdunensis (26.7%), S. epidermidis (8%), and a newly discovered S. borealis in 2020 (4%). Of non-Staphylococci MR bacteria, 20% accounted for Sphingomonas koreensis. Campus bathrooms serve as a reservoir for diverse bacteria carrying MR, which pose a direct risk of infection and a potential source of horizontal gene transfer. To reduce the health risk posed by MR bacteria in high traffic areas such as bathrooms additional environmental monitoring and improved decontamination practices are needed.

SHEA NICU white paper series: Practical approaches for the prevention of viral respiratory infections

This white paper provides clinicians and hospital leaders with practical guidance on the prevention and control of viral respiratory infections in the neonatal intensive care unit (NICU). This document serves as a companion to Centers for Disease Control and Prevention Healthcare Infection Control Practices Advisory Committee (HICPAC)'s "Prophylaxis and Screening for Prevention of Viral Respiratory Infections in Neonatal Intensive Care Unit Patients: A Systematic Review." It provides practical, expert opinion and/or evidence-based answers to frequently asked questions about viral respiratory detection and prevention in the NICU. It was developed by a writing panel of pediatric and pathogen-specific experts who collaborated with members of the HICPAC systematic review writing panel and the SHEA Pediatric Leadership Council to identify questions that should be addressed. The document has been endorsed by SHEA, the American Hospital Association (AHA), The Joint Commission, the Pediatric Infectious Diseases Society (PIDS), the Association for Professionals in Infection Control and Epidemiology (APIC), the Infectious Diseases Society of America (IDSA), and the National Association of Neonatal Nurses (NANN).

Genomic Surveillance Uncovers a 10-Year Persistence of an OXA-24/40 Acinetobacter baumannii Clone in a Tertiary Hospital in Northern Spain

Infections caused by carbapenem-resistant Acinetobacter baumannii are a global threat causing a high number of fatal infections. This microorganism can also easily acquire antibiotic resistance determinants, making the treatment of infections a big challenge, and has the ability to persist in the hospital environment under a wide range of conditions. The objective of this work was to study the molecular epidemiology and genetic characteristics of two blaOXA24/40Acinetobacter baumannii outbreaks (2009 and 2020-21) at a tertiary hospital in Northern Spain. Thirty-six isolates were investigated and genotypically screened by Whole Genome Sequencing to analyse the resistome and virulome. Isolates were resistant to carbapenems, aminoglycosides and fluoroquinolones. Multi-Locus Sequence Typing analysis identified that Outbreak 1 was mainly produced by isolates belonging to ST3Pas/ST106Oxf (IC3) containing blaOXA24/40, blaOXA71 and blaADC119. Outbreak 2 isolates were exclusively ST2Pas/ST801Oxf (IC2) blaOXA24/40, blaOXA66 and blaADC30, the same genotype seen in two isolates from 2009. Virulome analysis showed that IC2 isolates contained genes for capsular polysaccharide KL32 and lipooligosacharide OCL5. A 8.9 Kb plasmid encoding the blaOXA24/40 gene was common in all isolates. The persistance over time of a virulent IC2 clone highlights the need of active surveillance to control its spread.

Amplifying bactericidal activity: Surfactant-mediated AgBr thin film coating over two-dimensional vertically aligned ZnO nanorods for dark-light dual mode disinfection

Thin film coatings with potent antibacterial properties find critical applications in diverse domains such as medical devices, frequently touched surfaces, and food packaging for combating microbial proliferation across diverse scenarios. Two-dimensional photocatalytic antimicrobial coatings, offering a substantial actual-to-apparent surface ratio, hold immense potential for achieving this objective. However, realizing antibacterial performance not just under light but also in dark conditions remains a challenge. To address this, we present AgBr-coated vertically aligned ZnO nanorods (NRs) thin film architecture, employing a unique surfactant-mediated solution-phase spin-coating approach for achieving uniform deposition of AgBr onto ZnO NRs. The resulting ZnO NRs/AgBr heterojunction architectures have been characterized for their microstructural, morphological, elemental, optical, and wettability attributes. The studies have ascertained the tunability of AgBr content by modulating the concentration of its surfactant-based precursor solution. Further, valence band (VB) analyses revealed an increase in the electron density near to the VB edge. The dual role of AgBr as an antimicrobial agent and a photosensitizer, effectively enhancing the visible-light photodisinfection efficacy of ZnO NRs, has been evident through the dark-light dual mode antibacterial studies. Electron paramagnetic resonance measurements have shown hydroxyl radicals being majorly responsible for the visible-light photodisinfection performance. Encouragingly, reusability assessments showcase significant promise, while artificial sweat-wiping studies on the structures unveil heightened photodisinfection efficacy. This enhancement could be attributed to components like urea and lactic acid, speculated to augment the photocatalytic efficiency by minimizing charge recombination.

High Bacterial Contamination Load of Self-Service Facilities in Sakaka City, Aljouf, Saudi Arabia, with Reduced Sensitivity to Some Antimicrobials

Although self-service facilities (SSFs) have been used on a large scale worldwide, they can be easily contaminated by microorganisms from the hands of their sequential users. This research aimed to study the prevalence and antimicrobial susceptibility/resistance of bacteria contaminating SSFs in Sakaka, Aljouf, Saudi Arabia. We randomly swabbed the surfaces of 200 SSFs, then used the suitable culture media, standard microbiological methods, and the MicroScan WalkAway Microbiology System, including the identification/antimicrobial susceptibility testing-combo panels. A high SSFs' bacterial contamination load was detected (78.00%). Ninety percent of the samples collected in the afternoon, during the maximum workload of the SSFs, yielded bacterial growth (p < 0.001 *). Most of the contaminated SSFs were supermarket payment machines, self-pumping equipment at gas stations (p = 0.004 *), online banking service machines (p = 0.026 *), and barcode scanners in supermarkets. In the antiseptic-deficient areas, 55.1% of the contaminated SSFs were detected (p = 0.008 *). Fifty percent of the contaminated SSFs were not decontaminated. The most common bacterial contaminants were Escherichia coli (70 isolates), Klebsiella pneumoniae (66 isolates), Staphylococcus epidermidis (34 isolates), methicillin-resistant Staphylococcus aureus (18 isolates), and methicillin-sensitive Staphylococcus aureus (14 isolates), representing 31.53%, 29.73%, 15.32%, 8.11%, and 6.31% of the isolates, respectively. Variable degrees of reduced sensitivity to some antimicrobials were detected among the bacterial isolates. The SSFs represent potential risks for the exchange of antimicrobial-resistant bacteria between the out-hospital environment and the hospitals through the hands of the public. As technology and science advance, there is an urgent need to deploy creative and automated techniques for decontaminating SSFs and make use of recent advancements in materials science for producing antibacterial surfaces.

Multidrug-resistant and carbapenemase-producing critical gram-negative bacteria isolated from the intensive care unit environment in Amhara region, Ethiopia

BACKGROUND

Intensive care units are units where healthcare-associated infections (HAIs) are common and antimicrobial resistance rates are increasing. Microbial contamination in hospital environment plays an important role in the development of HAIs. Intervention-based improvements in infection prevention and control at national and facility level are critical for the containment of antimicrobial resistance and prevention of HAIs.

OBJECTIVES

This study aimed to determine the distribution of multidrug-resistant and carbapenemase-producing critical gram negative bacteria (Klebsiella pneumoniae, Escherichia coli, Pseudomonas aeruginosa and Acinetobacter species) and their antibiotic resistance in intensive care unit environmental surfaces at the University of Gondar and Felege Hiwot Comprehensive Specialized Hospitals.

METHODS

This was multicenter hospital-based cross sectional study. Environmental samples were swabbed from all intensive care units using a normal saline moistened-sterile cotton tip stick. Bacteria culturing and antibiotic susceptibility testing were performed following standard microbiological techniques. Selected meropenem-resistant isolates were phenotypically assessed for carbapenemase production using modified and simplified carbapenem inactivation methods.

RESULTS

From a total of 384 environmental samples analyzed, 126 (32.8%) showed growth and 162 isolates were identified. K. pneumoniae (79/162, 48.8%) was the commonest isolate followed by Acinetobacter species (51/162, 31.5%), E. coli (19/162, 11.7%) and P. aeruginosa (13/162, 8.0%). Multidrug-resistant and carbapenemase-producing isolates were detected on most hospital environment surface types, especially from the baby bed sets and incubators. The most common multidrug-resistant and principal carbapenemase producer was K. pneumoniae, with rates of 71(89.9%) and 24(85.7%), respectively.

CONCLUSION

This study revealed the distribution of multidrug-resistant and carbapenemase-producing critical gram negative bacteria in the environment of intensive care unit. Higher detection rate of multidrug-resistant and carbapenemase-producing K. pneumoniae on most environmental surfaces calls for urgent control action and further attention.

Assessment of Soiling on Highly Touched Clinical Surfaces in Intensive Care Units

AIM

The aim of this study is to evaluate highly touched clinical surfaces using visual inspection methods and adenosine triphosphate by bioluminescence to identify soiling in intensive care units.

METHOD

Descriptive, cross-sectional study carried out in three intensive care units located in Belo Horizonte, MG, Brazil. Data collection included 142 assessments of environmental surfaces. For data analysis, the Pareto diagram and descriptive statistics were used through measures of central tendency.

RESULTS

The visual inspection identified dirtiness in the infusion pump, alcohol dispenser, and telephone. The surface that showed a high level of contamination by organic matter identified by the adenosine triphosphate bioluminescence test was the telephone, with a median of 1012 RLU/cm2 (±348.8).

CONCLUSION

The surface evaluation methods used in the intensive care units made it possible to identify dirt on surfaces highly touched by hands, reinforcing the need for investments in training and audits in the process of cleaning and disinfecting surfaces.

Does repeated exposure to hydrogen peroxide induce Candida auris resistance?

BACKGROUND

To minimize environmental colonization by microorganisms that may persist and thrive in healthcare settings, thus reducing healthcare-associated infections (HAIs), new insights over already known biocides are certainly of relevance. Although the efficacy of hydrogen peroxide (H2O2) against the emergent yeast Candida auris is moderately documented, concerns over the potential induction of resistance after repeated exposure do persist. The main objective of the present study was to evaluate the hypothetical induction of Candida auris resistance following 30 days of consecutive exposure to lethal and sublethal concentrations of H2O2. Furthermore, the authors aimed to elucidate about the rank of efficacy of H2O2 against C. auris comparing to other Candida species and whether different strains of C. auris may display different susceptibilities to H2O2.

METHODS

During the induction of resistance assays, both type strains and clinical isolates of Candida auris, Candida albicans and Candida parapsilosis were exposed repeatedly to defined concentrations of H2O2, for 30 days.

RESULTS

After that period, no significant differences were found when comparing the minimal inhibitory concentration values of H2O2 in case of the induced strains versus each respective positive control. Moreover, H2O2 displayed similar effectiveness against all the tested Candida species and no differences were demonstrated among the distinct strains of C. auris.

CONCLUSIONS

The adoption of H2O2 solutions in routine protocols in order to promote disinfection standards against Candida auris, improving patient safety and reducing healthcare costs, is certainly welcomed.

Risky behavior during stair descent for young adults: Differences in men versus women

Injuries commonly occur on stairs, with high injury rates in young adults, especially young women. High injury rates could result from physiological and/or behavioral differences; this study focuses on behaviors. The purposes of this observational study were (1) to quantify young adult behaviors during stair descent and (2) to identify differences in stair descent behavior for young adult men versus women. Young adult pedestrians (N = 2,400, 1,470 men and 930 women) were videotaped during descent of two indoor campus staircases, a short staircase (2 steps) and a long staircase (17 steps). Behaviors during stair descent were coded by experimenters. Risky behaviors observed on the short staircase included: No one used the handrail, 16.1% used an electronic device, and 16.4% had in-person conversations. On the long staircase: 64.8% of pedestrians did not use the handrail, 11.9% used an electronic device, and 14.5% had in-person conversations. Risky behaviors observed more in women included: less likely to use the handrail (long staircase), more likely to carry an item in their hands (both staircases), more likely to engage in conversation (both staircases), and more likely to wear sandals or heels (both staircases) (p≤0.05). Protective behaviors observed more in women included: less likely to skip steps (both staircases), and more likely to look at treads during transition steps (long staircase) (p≤0.05). The number of co-occurring risky behaviors was higher in women: 1.9 vs 2.3, for men vs women, respectively (p<0.001). Five pedestrians lost balance but did not fall; four of these pedestrians lost balance on the top step and all five had their gaze diverted from the steps at the time balance was lost. The observed behaviors may be related to the high injury rate of stair-related falls in young adults, and young women specifically.

A longitudinal environmental surveillance study for SARS-CoV-2 from the emergency department of a teaching hospital in Hong Kong

BACKGROUND

Understanding factors associated with SARS-CoV-2 exposure risk in the hospital setting may help improve infection control measures for prevention.

AIM

To monitor SARS-CoV-2 exposure risk among healthcare workers and to identify risk factors associated with SARS-CoV-2 detection.

METHODS

Surface and air samples were collected longitudinally over 14 months spanning 2020-2022 at the Emergency Department (ED) of a teaching hospital in Hong Kong. SARS-CoV-2 viral RNA was detected by real-time reverse-transcription polymerase chain reaction. Ecological factors associated with SARS-CoV-2 detection were analysed by logistic regression. A sero-epidemiological study was conducted in January to April 2021 to monitor SARS-CoV-2 seroprevalence. A questionnaire was used to collect information on job nature and use of personal protective equipment (PPE) of the participants.

FINDINGS

SARS-CoV-2 RNA was detected at low frequencies from surfaces (0.7%, n=2562) and air samples (1.6%, n=128). Crowding was identified as the main risk factor, as weekly ED attendance (OR=1.002, p=0.04) and sampling after peak-hours of ED attendance (OR=5.216, p=0.03) were associated with the detection of SARS-CoV-2 viral RNA from surfaces. The low exposure risk was corroborated by the zero seropositive rate among 281 participants by April 2021.

CONCLUSION

Crowding may introduce SARS-CoV-2 into ED through increased attendances. Multiple factors may have contributed to the low contamination of SARS-CoV-2 at the ED, including hospital infection control measures for screening ED attendees, high PPE compliance among healthcare workers, and various public health and social measures implemented to reduce community transmission in Hong Kong where a dynamic zero COVID-19 policy was adopted.

Antimicrobial-Resistant Enterobacterales Recovered from the Environment of Two Zoological Institutions Include Enterobacter cloacae Complex ST171 Producing KPC-4 Carbapenemase

Environmental surfaces can serve as reservoirs for pathogens and antimicrobial-resistant (AMR) bacteria in healthcare settings. Although active surveillance programs are used in veterinary and human healthcare, unconventional settings like zoological facilities are often overlooked, even though antimicrobials are used to maintain the health of their animal collections. Here, we used electrostatic cloths to conduct active environmental surveillance over a 2-year period at two zoological institutions to determine contamination prevalence of human-only and mixed animal-human touch environments with AMR bacteria. We recovered Enterobacterales isolates that expressed quinolone resistance, an AmpC-like phenotype, and an extended-spectrum β-lactamase phenotype from 144 (39%), 141 (38.2%), and 72 (19.5%) of the environmental samples, respectively. The zoological institutions, areas and exhibits within the zoological facility, and sampling surface type affected the odds of recovering AMR bacteria from the environment. Three carbapenemase-producing Enterobacter cloacae complex ST171 isolates recovered from one zoological facility harbored an IncH12 plasmid with a Tn4401b-KPC-4 transposon conferring multidrug resistance. One isolate maintained three tandem repeats of a Tn4401b-KPC-4 element on an IncHI2 plasmid, although this isolate was susceptible to the four carbapenem drugs tested. These three isolates and their IncH12 plasmids shared significant genomic similarity with two E. cloacae complex isolates recovered from canine patients at a regional veterinary hospital during year 2 of this study. Our results indicated that surface environments at zoological institutions can serve as reservoirs for AMR bacteria and their genes and have implications for animal and public health. IMPORTANCE Environmental surfaces can be a source of antimicrobial-resistant (AMR) bacteria that pose a risk to human and animal health. Zoological institutions are unique environments where exotic animals, staff, and visitors intermingle and antimicrobials are used to maintain animal health. However, zoological environments are often overlooked as reservoirs of AMR bacteria. Here, we show that zoological environments can serve as reservoirs of fluoroquinolone-resistant and extended-spectrum cephalosporin-resistant bacteria. In addition, we isolated three carbapenemase-producing Enterobacter cloacae complex strains carrying blaKPC-4, including one with a unique, tandem triplicate of the Tn4401b-KPC-4 element. Comparative whole genomics of these isolates with two E. cloacae complex isolates from patients at a regional veterinary hospital highlighted the possibility of local KPC-4 spread between animal environments. Our results suggest that environments at zoological institutions serve as reservoirs for AMR bacteria and pose a hypothetical One Health risk to the public, staff, and the wild animal populations in captivity.

Demonstrating the In Vitro and In Situ Antimicrobial Activity of Oxide Mineral Microspheres: An Innovative Technology to Be Incorporated into Porous and Nonporous Materials

The antimicrobial activity of surfaces treated with zinc and/or magnesium mineral oxide microspheres is a patented technology that has been demonstrated in vitro against bacteria and viruses. This study aims to evaluate the efficiency and sustainability of the technology in vitro, under simulation-of-use conditions, and in situ. The tests were undertaken in vitro according to the ISO 22196:2011, ISO 20473:2013, and NF S90-700:2019 standards with adapted parameters. Simulation-of-use tests evaluated the robustness of the activity under worst-case scenarios. The in situ tests were conducted on high-touch surfaces. The in vitro results show efficient antimicrobial activity against referenced strains with a log reduction of >2. The sustainability of this effect was time-dependent and detected at lower temperatures (20 ± 2.5 °C) and humidity (46%) conditions for variable inoculum concentrations and contact times. The simulation of use proved the microsphere's efficiency under harsh mechanical and chemical tests. The in situ studies showed a higher than 90% reduction in CFU/25 cm² per treated surface versus the untreated surfaces, reaching a targeted value of <50 CFU/cm². Mineral oxide microspheres can be incorporated into unlimited surface types, including medical devices, to efficiently and sustainably prevent microbial contamination.

An Omniphobic Spray Coating Created from Hierarchical Structures Prevents the Contamination of High-Touch Surfaces with Pathogens

Engineered surfaces that repel pathogens are of great interest due to their role in mitigating the spread of infectious diseases. A robust, universal, and scalable omniphobic spray coating with excellent repellency against water, oil, and pathogens is presented. The coating is substrate-independent and relies on hierarchically structured polydimethylsiloxane (PDMS) microparticles, decorated with gold nanoparticles (AuNPs). Wettability studies reveal the relationship between surface texturing of micro- and/or nano-hierarchical structures and the omniphobicity of the coating. Studies of pathogen transfer with bacteria and viruses reveal that an uncoated contaminated glove transfers pathogens to >50 subsequent surfaces, while a coated glove picks up 10⁴ (over 99.99%) less pathogens upon first contact and transfers zero pathogens after the second touch. The developed coating also provides excellent stability under harsh conditions. The remarkable anti-pathogen properties of this surface combined with its ease of implementation, substantiate its use for the prevention of surface-mediated transmission of pathogens.

Electrospun Polyacrylonitrile Silver(I,III) Oxide Nanoparticle Nanocomposites as Alternative Antimicrobial Materials

Infectious microbial diseases can easily be transferred from person to person in the air or via high contact surfaces. As a result, researchers must aspire to create materials that can be implemented in surface contact applications to disrupt pathogen growth and transmission. This study examines the antimicrobial properties of polyacrylonitrile (PAN) nanofibers coated with silver nanoparticles (AgNPs) and silver(I,III) oxide. PAN was homogenized with varied weight concentrations of silver nitrate (AgNO3) in N,N-dimethylformamide solution, a common organic solvent that serves as both an electrospinning solvent and as a reducing agent that forms AgNPs. The subsequent colloids were electrospun into nanofibers, which were then characterized via various analysis techniques, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray analysis, dynamic light scattering, and X-ray photoelectron spectroscopy. A total of 10 microbes, including 7 strains of Gram-positive bacteria, 2 strains of Gram-negative bacteria, and Candida albicans, were incubated with cutouts of various PAN-AgNP nanocomposites using disk diffusion methods to test for the nanocomposites' antimicrobial efficiency. We report that our electrospun PAN-AgNP nanocomposites contain 100% AgO, a rare, mixed oxidation state of silver(I,III) oxide that is a better sterilizing agent than conventional nanosilver. PAN-AgNP nanocomposites also retain a certain degree of antimicrobial longevity; samples stored for approximately 90 days demonstrate a similar antimicrobial activity against Escherichia coli (E. coli) and Lactobacillus crispatus (L. crispatus) when compared to their newly electrospun counterparts. Moreover, our results indicate that PAN-AgNP nanocomposites successfully display antimicrobial activity against various bacteria and fungi strains regardless of their resistance to conventional antibiotics. Our study demonstrates that PAN-AgNP nanocomposites, a novel polymer material with long-term universal antimicrobial stability, can potentially be applied as a universal antimicrobial on surfaces at risk of contracting microbial infections and alleviate issues related to antibiotic overuse and microbial mutability.

Environmental bacterial and fungal contamination in high touch surfaces and indoor air of a paediatric intensive care unit in Maputo Central Hospital, Mozambique in 2018

Background

The hospital environment serves as a reservoir of microorganisms which may be associated with healthcare-associated infections (HCAI). The study of environmental contamination with microorganisms is a method for the assessment of hospital environmental hygiene. We sought to evaluate the environmental colonisation of a national reference hospital unit, using the total aerobic colony count (ACC) and the isolated microorganisms, as assessment tools.

Methods

A cross-sectional study was conducted in the Paediatric Intensive Care Unit (PICU) of the Hospital Central de Maputo during a four-week period in 2018. Surfaces and air were sampled before and after room cleaning, using swabs and passive air method. Those samples were processed at the microbiology laboratory where total ACC levels were evaluated, and microorganisms were isolated, identified and assessed for antibiotic susceptibility.

Discussion

Comparison of the total median ACC of the indoor air (287 cfu/m³ before and 195 cfu/m³ after) and surfaces (0.38 cfu/cm² before and 0.33 cfu/cm² after) before and after room cleaning did not show significant differences (P>0.05). Microorganisms of epidemiological importance, including coagulase negative staphylococci (CoNS), Klebsiella pneumoniae and Serratia odorifera were isolated and all of these three were multi-drug resistant (MDR).

Conclusion

The results showed controlled contamination levels on high touch surfaces in the patient environment and a high level of contamination of the indoor air suggesting deficiencies in the PICU environmental decontamination process. There was evidence of the presence of fungi and MDR species of epidemiological importance in the context of HCAI.

Advances in experimental and computational methodologies for the study of microbial-surface interactions at different omics levels

The study of the biological response of microbial cells interacting with natural and synthetic interfaces has acquired a new dimension with the development and constant progress of advanced omics technologies. New methods allow the isolation and analysis of nucleic acids, proteins and metabolites from complex samples, of interest in diverse research areas, such as materials sciences, biomedical sciences, forensic sciences, biotechnology and archeology, among others. The study of the bacterial recognition and response to surface contact or the diagnosis and evolution of ancient pathogens contained in archeological tissues require, in many cases, the availability of specialized methods and tools. The current review describes advances in in vitro and in silico approaches to tackle existing challenges (e.g., low-quality sample, low amount, presence of inhibitors, chelators, etc.) in the isolation of high-quality samples and in the analysis of microbial cells at genomic, transcriptomic, proteomic and metabolomic levels, when present in complex interfaces. From the experimental point of view, tailored manual and automatized methodologies, commercial and in-house developed protocols, are described. The computational level focuses on the discussion of novel tools and approaches designed to solve associated issues, such as sample contamination, low quality reads, low coverage, etc. Finally, approaches to obtain a systems level understanding of these complex interactions by integrating multi omics datasets are presented.

In Situ Surface-Directed Assembly of 2D Metal Nanoplatelets for Drug-Free Treatment of Antibiotic-Resistant Bacteria

The development of antibiotic resistance among bacterial strains is a major global public health concern. To address this, drug-free antibacterial approaches are needed. Copper surfaces have long been known for their antibacterial properties. In this work, a one-step surface modification technique is used to assemble 2D copper chloride nanoplatelets directly onto copper surfaces such as copper tape, transmission electron microscopy (TEM) grids, electrodes, and granules. The nanoplatelets are formed using copper ions from the copper surfaces, enabling their direct assembly onto these surfaces in a one-step process that does not require separate nanoparticle synthesis. The synthesis of the nanoplatelets is confirmed with TEM, scanning electron microscopy, energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). Antibacterial properties of the Cu nanoplatelets are demonstrated in multidrug-resistant (MDR) Escherichia coli, MDR Acinetobacter baumannii, MDR Staphylococcus aureus, E. coli, and Streptococcus mutans. Nanoplatelets lead to a marked improvement in antibacterial properties compared to the copper surfaces alone, affecting bacterial cell morphology, preventing bacterial cell division, reducing their viability, damaging bacterial DNA, and altering protein expression. This work presents a robust method to directly assemble copper nanoplatelets onto any copper surface to imbue it with improved antibacterial properties.

Weathering and Antimicrobial Properties of Laminate and Powder Coatings Containing Silver Phosphate Glass Used as High-Touch Surfaces

Increasing the use of hygienic high-touch surfaces with antimicrobial properties in health care and public spaces is one way to hinder the spread of bacteria and infections. This study investigates the antimicrobial efficacy and surface reactivity of commercial laminate and powder coated surfaces treated with silver-doped phosphate glass as antimicrobial additive towards two model bacterial strains, Escherichia coli and Bacillus subtilis, in relation to surface weathering and repeated cleaning. High-touch conditions in indoor environments were simulated by different extents of pre-weathering (repeated daily cycles in relative humidity at constant temperature) and simplified fingerprint contact by depositing small droplets of artificial sweat. The results elucidate that the antimicrobial efficacy was highly bacteria dependent (Gram-positive or Gram-negative), not hampered by differences in surface weathering but influenced by the amount of silver-doped additive. No detectable amounts of silver were observed at the top surfaces, though silver was released into artificial sweat in concentrations a thousand times lower than regulatory threshold values stipulated for materials and polymers in food contact. Surface cleaning with an oxidizing chemical agent was more efficient in killing bacteria compared with an agent composed of biologically degradable constituents. Cleaning with the oxidizing agent resulted further in increased wettability and presence of residues on the surfaces, effects that were beneficial from an antimicrobial efficacy perspective.

Acinetobacter baumannii: insights towards a comprehensive approach for the prevention of outbreaks in health-care facilities

Acinetobacter baumannii is known to be an opportunistic pathogen frequently responsible for outbreaks in health-care facilities, particularly in Intensive Care Units (ICU). It can easily survive in the hospital setting for long periods and can be transmitted throughout the hospital in a variety of ways, explored in this review. It can also easily acquire antibiotic resistance determinants rendering several antibiotic drugs useless. In 2019, the US Centre for Disease Control (CDC) considered the organism as an urgent threat. The aim of this review was to raise the awareness of the medical community about the relevance of this pathogen and discuss how it may impact seriously the healthcare institutions particularly in the aftermath of the recent COVID-19 pandemic. PubMed was searched, and articles that met inclusion criteria were reviewed. We conclude by the need to raise awareness to this pathogen's relevance and to encourage the implementation of preventive measures in order to mitigate its consequences namely the triage of specific high-risk patients.

Antimicrobial polymeric composites for high-touch surfaces in healthcare applications

Antimicrobial polymer composites have long been utilized in the healthcare field as part of the first line of defense. These composites are desirable in that they pose a minimal risk of developing contagions with antibiotic resistance. For this reason, the field of antimicrobial composites has seen steady growth over recent years and is becoming increasingly important during the current COVID-19 pandemic. In this article, we first review the need of the antimicrobial polymers in high tough surfaces, the antimicrobial mechanism, and then the recent advances in the development of antimicrobial polymer composite including the utilization of intrinsic antimicrobial polymers, the addition of antimicrobial additives, and new exploration of surface patterning. While there are many established and developing methods of imbuing a material with antimicrobial activity, there currently is no standard quantification method for these properties leading to difficulty comparing the efficacy of these materials within the literature. A discussion of the common antimicrobial characterization methods is provided along with highlights on the need of a standardized quantification of antiviral and antibacterial properties in testing to allow ease of comparison between generated libraries and to facilitate proper screening. We also discuss and comment on the current trends of the development of antimicrobial polymer composites with long-lasting and specific antimicrobial activities, nontoxic properties, and environmental friendliness against a broad-spectrum of microbes.

Efficacy assessment of different time-cycles of nebulized hydrogen peroxide against bacterial and yeast biofilm

BACKGROUND

The prevention of healthcare-associated infections requires a continuous effort. In order to achieve better practical results, the control of environmental microbial biofilms with effective disinfection strategies should be addressed.

AIM

This study aims to test the efficacy of different time-cycles of nebulized H₂O₂ against bacterial and yeast dry biofilm.

METHODS

The efficacy of a standard cycle (SC) and of a fast cycle (FC) of nebulized H₂O₂ was compared. Microbial biofilms were previously grown on different material coupons. The biofilm metabolic activity was determined by XTT assay and the biofilm total biomass by crystal violet assay.

FINDINGS

Regarding the efficacy of nebulized H₂O₂ against biofilms, the mean reduction of metabolic activity of the SC was 55.2% (±19.4%), comparing to a reduction of 50.4% (±17.7%) of the FC. The mean reduction of total biomass of the SC was 45.5% (±22.7%), versus 46.7% (±21.7%) of the FC. No statistical significant differences were found when comparing the tested cycles and distinct materials.

CONCLUSION

H₂O₂ nebulization was found to exhibit a good efficacy against healthcare-associated microbial dry biofilms. Moreover, similar efficacies were found between the tested cycles.

Surveillance and prevalence of antimicrobial resistant bacteria from public settings within urban built environments: Challenges and opportunities for hygiene and infection control

Antimicrobial resistant (AMR) bacteria present one of the biggest threats to public health; this must not be forgotten while global attention is focussed on the COVID-19 pandemic. Resistant bacteria have been demonstrated to be transmittable to humans in many different environments, including public settings in urban built environments where high-density human activity can be found, including public transport, sports arenas and schools. However, in comparison to healthcare settings and agriculture, there is very little surveillance of AMR in the built environment outside of healthcare settings and wastewater. In this review, we analyse the existing literature to aid our understanding of what surveillance has been conducted within different public settings and identify what this tells us about the prevalence of AMR. We highlight the challenges that have been reported; and make recommendations for future studies that will help to fill knowledge gaps present in the literature.

Bacteria Associated with Healthcare-Associated Infections on Environmental Samples Obtained from Two Fire Departments

(1) Background: Firefighters spend about 64% of their time responding to medical emergencies and providing medical care without a patient history, which can render them vulnerable to healthcare-associated infections (HAI). Infection prevention, control, and surveillance systems have been instituted at hospitals. However, the prevalence of firefighters’ exposure to HAI is unknown. The objective of this study was to document evidence of HAI on surfaces in fire stations and engines to inform disinfection procedures and identify which pathogens might contribute to occupational exposures. (2) Methods: High-touch or high-use surfaces of two fire departments were sampled during five separate occasions. One fire station from one fire department was sampled over a 4-week period, whereas four fire stations were sampled from a different fire department only once. Sampled surfaces included: entryway floor, washing machine, medical bag, back seat of engine, keyboard of reporting computer, engine console, and uniform pants. (3) Results: Multiple statistical models determined that bacterial contamination was similar between the two fire departments and their stations. Keyboards were the most contaminated surface for all fire stations and departments, E. coli was the most common bacteria detected, and C. difficile was the least detected bacteria. Adjustments for rates of contamination found that contamination rates varied between fire stations. (4) Conclusions: Comprehensive environmental sampling and clinical studies are needed to better understand occupational exposures of firefighters to HAI.

Thermal Disinfection Validation: The Relationship Between A0 and Microbial Reduction

Validating a thermal disinfection process for the processing of medical devices using moist heat via direct temperature monitoring is a conservative approach and has been established as the A0 method. Traditional use of disinfection challenge microorganisms and testing techniques, although widely used and applicable for chemical disinfection studies, do not provide as robust a challenge for testing the efficacy of a thermal disinfection process. Considerable research has been established in the literature to demonstrate the relationship between the thermal resistance of microorganisms to inactivation and the A0 method formula. The A0 method, therefore, should be used as the preferred method for validating a thermal disinfection process using moist heat.

A Tn-seq Screen of Streptococcus pneumoniae Uncovers DNA Repair as the Major Pathway for Desiccation Tolerance and Transmission

Streptococcus pneumoniae is an opportunistic pathogen that is a common cause of serious invasive diseases such as pneumonia, bacteremia, meningitis, and otitis media. Transmission of this bacterium has classically been thought to occur through inhalation of respiratory droplets and direct contact with nasal secretions. However, the demonstration that S. pneumoniae is desiccation tolerant and, therefore, environmentally stable for extended periods of time opens up the possibility that this pathogen is also transmitted via contaminated surfaces (fomites). To better understand the molecular mechanisms that enable S. pneumoniae to survive periods of desiccation, we performed a high-throughput transposon sequencing (Tn-seq) screen in search of genetic determinants of desiccation tolerance. We identified 42 genes whose disruption reduced desiccation tolerance and 45 genes that enhanced desiccation tolerance. The nucleotide excision repair pathway was the most enriched category in our Tn-seq results, and we found that additional DNA repair pathways are required for desiccation tolerance, demonstrating the importance of maintaining genome integrity after desiccation. Deletion of the nucleotide excision repair gene uvrA resulted in a delay in transmission between infant mice, indicating a correlation between desiccation tolerance and pneumococcal transmssion. Understanding the molecular mechanisms that enable pneumococcal persistence in the environment may enable targeting of these pathways to prevent fomite transmission, thereby preventing the establishment of new colonization and any resulting invasive disease.

Thermal Disinfection Validation: The Relationship Between A0 and Microbial Reduction

Validating a thermal disinfection process for the processing of medical devices using moist heat via direct temperature monitoring is a conservative approach and has been established as the A0 method. Traditional use of disinfection challenge microorganisms and testing techniques, although widely used and applicable for chemical disinfection studies, do not provide as robust a challenge for testing the efficacy of a thermal disinfection process. Considerable research has been established in the literature to demonstrate the relationship between the thermal resistance of microorganisms to inactivation and the A0 method formula. The A0 method, therefore, should be used as the preferred method for validating a thermal disinfection process using moist heat.

Fast-cycle hydrogen peroxide nebulization against frequent healthcare-associated micro-organisms: efficacy assessment

BACKGROUND

Hydrogen peroxide (H₂O₂)-based technology is currently used with the aim of controlling microbial contamination in hospital settings. However, the long cycles required result in prolonged room turnover time, thus precluding a wider implementation of the technology.

AIM

To assess the efficacy of a shorter cycle of nebulized H₂O₂ against healthcare-associated micro-organisms, further comparing among multidrug-resistant and multidrug-susceptible strains.

METHODS

The efficacy of a standard cycle (1 h) and of a faster cycle (15 min) of a 7% H₂O₂ nebulized solution was compared against bacteria and yeasts. MDR and MDS strains were inoculated on polyvinyl chloride, stainless steel, linoleum, napa leather, and formica coupons, and their growth ability was compared.

FINDINGS

Globally, the mean efficacy of the standard cycle ranged between 82.5% (±17.0) and 95.9% (±8.3), while the efficacy of the fast cycle ranged between 84.4% (±17.0) and 95.7% (±10.5). No statistically significant differences were found for the majority of the tested cycles and materials. For all the tested strains, no differences were found regarding the efficacy of cycles.

CONCLUSION

The very high disinfection efficacy of the fast cycle was found to be similar to that of the standard cycle. Moreover, a similar efficacy was also demonstrated when comparing between multidrug-resistant and multidrug-susceptible strains. This study supports a wider implementation of the technology, with the expected advantages of reducing room turnover time, costs, and indirect infection transmission. Further assessment of the efficacy of this faster cycle against other emergent microbial global threats would be highly recommended.

Antibacterial activity testing methods for hydrophobic patterned surfaces

One strategy to decrease the incidence of hospital-acquired infections is to avoid the survival of pathogens in the environment by the development of surfaces with antimicrobial activity. To study the antibacterial behaviour of active surfaces, different approaches have been developed of which ISO 22916 is the standard. To assess the performance of different testing methodologies to analyse the antibacterial activity of hydrophobic surface patterned plastics as part of a Horizon 2020 European research project. Four different testing methods were used to study the antibacterial activity of a patterned film, including the ISO 22916 standard, the immersion method, the touch-transfer inoculation method, and the swab inoculation method, this latter developed specifically for this project. The non-realistic test conditions of the ISO 22916 standard showed this method to be non-appropriate in the study of hydrophobic patterned surfaces. The immersion method also showed no differences between patterned films and smooth controls due to the lack of attachment of testing bacteria on both surfaces. The antibacterial activity of films could be demonstrated by the touch-transfer and the swab inoculation methods, that more precisely mimicked the way of high-touch surfaces contamination, and showed to be the best methodologies to test the antibacterial activity of patterned hydrophobic surfaces. A new ISO standard would be desirable as the reference method to study the antibacterial behaviour of patterned surfaces.

A Pan-Canadian narrative review on the protocols for reopening dental services during the COVID-19 pandemic

The current coronavirus disease 2019 (COVID-19) pandemic is impacting the way in which dental services are provided. The aim of this narrative review was twofold: to summarize key areas from the Canadian protocols available for the reopening and restructuring of dental services across the country and to critically review these protocols based on existing evidence. A narrative review of the existing Canadian protocols, written in English and French, was undertaken between April 15 and July 13, 2020. The protocols were obtained by searching through regulatory bodies and websites from professional organizations, and from personal contacts through academic institutions and policy leaders. The data extraction form focused only on protocols related to dentistry, and the information was compiled by a hired assistant. Content was categorized via group discussions with the research team on eight areas: office management and procedures, patient and staff screening, treatment procedures, office layout, risk reduction, personal protective equipment, supporting information, and length and readability. Thirteen protocols were identified and offered substantial variation in the level of details provided. All but two protocols specified proper donning/doffing of personal protective equipment, while all protocols recommended daily monitoring of COVID-19 related signs and symptoms in staff and patients. They varied in terms of recommended mask types, eye and face shield protection, and head coverings. While all protocols aimed at restructuring emergency dental services, their recommendations were often not based on the published evidence. This narrative review summarized key areas from 13 provincial and territorial protocols in Canada to help oral health care providers plan the reopening of their services. The information conveyed across all documents was clear, but variance highlights the need for a coordinated effort to develop an evidence-based document for dental practitioners.

Quantitative characterization of high-touch surfaces in emergency departments and hemodialysis facilities

An observational study was conducted to characterize high-touch surfaces in emergency departments and hemodialysis facilities. Certain surfaces were touched with much greater frequency than others. A small number of surfaces accounted for the majority of touch episodes. Prioritizing disinfection of these surfaces may reduce pathogen transmission within healthcare environments.

Effect of thermal control of dry fomites on regulating the survival of human pathogenic bacteria responsible for nosocomial infections

We monitored the survival of human pathogenic bacteria [Escherichia coli (ATCC), extended-spectrum β-lactamase-producing E. coli (Clinical isolate), New Delhi metallo-β-lactamase-producing E. coli (clinical isolate), Staphylococcus aureus (ATCC)] on dry materials (vinyl chloride, aluminum, plastic, stainless steel) at distinct temperatures (room temperature or 15°C–37°C). These bacteria favored a lower temperature for their prolonged survival on the dry fomites, regardless of the material type. Interestingly, when mixed with S. aureus, E. coli survived for a longer time at a lower temperature. Cardiolipin, which can promote the survival of S. aureus in harsh environments, had no effect on maintaining the survival of E. coli. Although the trends remained unchanged, adjusting the humidity from 40% to 60% affected the survival of bacteria on dry surfaces. Scanning electron microscopic analysis revealed no morphological differences in these bacteria immediately before or after one day of dry conditions. In addition, ATP assessment, a method used to visualize high-touch surfaces in hospitals, was not effective at monitoring bacterial dynamics. A specialized handrail device fitted with a heater, which was maintained at normal human body core temperature, successfully prohibited the prolonged survival of bacteria [Enterococcus faecalis (ATCC), E. coli (ATCC), Pseudomonas aeruginosa (ATCC), S. aureus (ATCC), Acinetobacter baumannii (clinical isolate), and Serratia marcescens (clinical isolate)], with the exception of spore-forming Bacillus subtilis (from our laboratory collection) and the yeast-like fungus Candida albicans (from our laboratory collection)] on dry surfaces. Taken together, we concluded that the tested bacteria favor lower temperatures for their survival in dry environments. Therefore, the thermal control of dry fomites has the potential to control bacterial survival on high-touch surfaces in hospitals.

Nanomaterials as a new opportunity for protecting workers from biological risk

Healthcare-Associated Infections (HAIs) represent a frequent complication for hospitalized patients and more rarely for workers. In recent years, substantial scientific evidence has been reached regarding the role played by the inanimate surfaces, especially those touched in patient-care areas, in the transmission of nosocomial pathogens. Therefore, it is essential to find new collective protective measures to minimize microbial contamination in healthcare facilities, thereby preventing the spread of multi-drug resistant bacteria. We present an overview of the major nano-enabled AntiMicrobial Coatings (AMCs) which may be used as collective protective measures in healthcare setting, discussing also some aspects related to their effectiveness and safety. AMCs may be classified within three groups on base of their mechanism of action: surfaces releasing active compound, contact-killing surfaces and anti-adhesive surfaces. To date, little information is available on the effectiveness of AMCs to reduce the risk of HAIs since the most of studies do not reach conclusive results on their beneficial effects. Moreover, the lack of standard protocols for assessing antimicrobial efficacy and poor data about the interaction between AMCs and disinfectants prevent their placing on the market. Further studies are needed for assessing risks and benefits of AMCs as collective protective measures in healthcare setting.

Exploring the Hospital Microbiome by High-Resolution 16S rRNA Profiling

The aim of this work was to analyze and compare the bacterial communities of 663 samples from a Brazilian hospital by using high-throughput sequencing of the 16S rRNA gene. To increase taxonomic profiling and specificity of 16S-based identification, a strict sequence quality filtering process was applied for the accurate identification of clinically relevant bacterial taxa. Our results indicate that the hospital environment is predominantly inhabited by closely related species. A massive dominance of a few taxa in all taxonomic levels down to the genera was observed, where the ten most abundant genera in each facility represented 64.4% of all observed taxa, with a major predominance of Acinetobacter and Pseudomonas. The presence of several nosocomial pathogens was revealed. Co-occurrence analysis indicated that the present hospital microbial network had low connectedness, forming a clustered topology, but not structured among groups of nodes (i.e., modules). Furthermore, we were able to detect ecologically relevant relationships between specific microbial taxa, in particular, potential competition between pathogens and non-pathogens. Overall, these results provide new insight into different aspects of a hospital microbiome and indicate that 16S rRNA sequencing may serve as a robust one-step tool for microbiological identification and characterization of a wide range of clinically relevant bacterial taxa in hospital settings with a high resolution.

Blue Light Disinfection in Hospital Infection Control: Advantages, Drawbacks, and Pitfalls

Hospital acquired infections (HAIs) are a serious problem that potentially affects millions of patients whenever in contact with hospital settings. Worsening the panorama is the emergence of antimicrobial resistance by most microorganisms implicated in HAIs. Therefore, the improvement of the actual surveillance methods and the discovery of alternative approaches with novel modes of action is vital to overcome the threats created by the emergence of such resistances. Light therapy modalities represent a viable and effective alternative to the conventional antimicrobial treatment and can be preponderant in the control of HAIs, even against multidrug resistant organisms (MDROs). This review will initially focus on the actual state of HAIs and MDROs and which methods are currently available to fight them, which is followed by the exploration of antimicrobial photodynamic therapy (aPDT) and antimicrobial blue light therapy (aBLT) as alternative approaches to control microorganisms involved in HAIs. The advantages and drawbacks of BLT relatively to aPDT and conventional antimicrobial drugs as well as its potential applications to destroy microorganisms in the healthcare setting will also be discussed.