Hydrophobic Deep Eutectic Solvents in Developing Microextraction Methods Based on Solidification of Floating Drop: Application to the Trace HPLC/FLD Determination of PAHs

Application of hydrophobic eutectic solvent in efficient biotransformation of total flavonoids of Herba Epimedii

Icaritin, a hydrolysate from total flavonoids of Epimedii (TFE), which has better anti-hepatoma activity than its glycosylated form. In this work, immobilized enzymes 4LP-Tpebgl3@Na-Y and DtRha@ES-107 were used to hydrolyze TFE to prepare icaritin. Five different hydrophobic deep eutectic solvents (HDES) were prepared and the most ideal HDES was successfully selected, which was composed of dodecyl alcohol and thymol with the molar ratio of 2:1. The relative enzyme activity of 4LP-Tpebgl3@Na-Y and DtRha@ES-107 was about 102.4 % and 112.5 %, respectively. In addition, the thermal and binding stability of 4LP-Tpebgl3@Na-Y and DtRha@ES-107 in HDES was not affected negatively. In the biphasic system composed of 50 % (v/v) HDES and Na2HPO4-citric acid buffer (50 mM, pH 5.5), 4LP-Tpebgl3@Na-Y (1.0 U/mL) and TFE (1 g/L) were reacted at 80 °C for 1 h, and then reacted with DtRha@ES-107 (20 U/mL) at 80 °C for 2 h. Finally, TFE was completely converted to 301.8 mg/L icaritin (0.82 mM). After 10 cycles, 4LP-Tpebgl3@Na-Y/DtRha@ES-107 still maintained 84.1 % original activity. In this study, we developed an efficient methodology for icaritin preparation through the integration of enzymatic catalysis and adsorption separation, presenting a viable approach for large-scale, cost-effective production of icaritin.

Recyclable water-modified deep eutectic solvents for removal of multiple heavy metals from soil

Removing heavy metals from soil has always been a challenge in terms of safety and effectiveness. Deep eutectic solvents (DESs) are recognized as environmentally friendly reagents with great potential in the removal of heavy metals from soil. In this study, water was introduced as a third component to form new ternary deep eutectic water solvents (DEWSs) to improve their performance. The removal capacity, applicable conditions and mechanisms of sixteen DEWSs for heavy metals were systematically investigated. Experimental results showed that the presence of water significantly enhanced the removal efficiency of three DESs (Choline chloride plus Urea, DEU; Choline chloride plus l-lactic acid, DELA; and Choline chloride plus Ethylene glycol, DEEG) for heavy metals. However, as the molar ratio of water increased, the eutectic systems in the DEWSs weakened and eventually disappeared. Under optimum conditions, DEWLA7 (DELA : H2O = 2 : 8) showed the highest removal rate for cadmium, lead, copper and zinc, which were 43.42%, 94.73%, 90.72% and 96.44%, respectively. Hydrogen bonding, adsorption of oxygen functional groups, exchangeable hydrogen substitution, changes in viscosity properties and co-precipitation all contributed to the removal of heavy metals by DEWLA7. Notably, DEWLA7 had no significant effect on the content of major minerals and nutrients in the soil. Furthermore, DEWLA7 proved to be reusable for soil washing, and still retains a high removal rate of 37.32%-83.66% after multi-stage filtration treatment. Therefore, DEWLA7 was an unexplored and excellent soil washing agent with great potential in economic and social benefits.

Evaluating the status quo of deep eutectic solvent in food chemistry. Potentials and limitations

Conventional organic solvents (e.g., methanol, ethanol, ethyl acetate) are widely used for extraction, reaction, and separation of valuable compounds. Although these solvents are effective, they have disadvantages, including flammability, toxicity, and persistence in the environment. Deep eutectic solvents (DESs) are valued for their biodegradability/low impact on the environment, low cost, and ease of manufacture. The objective of this review was to provide an overview of applications of DES in food chemistry, specifically in regard of extraction of polyphenols (e.g., anthocyanin, rutin, kaempferol, quercetin, resveratrol), protein, carbohydrates (e.g., chitin, pectins), lipids and lipid-soluble compounds (e.g., free fatty acids, astaxanthin, β-carotene, terpenoids), biosensor development, and use in food safety (pyrethroids, Sudan I, bisphenol A, Pb²⁺, Cd²⁺, etc.) over the past five years. A comprehensive analysis and discussion of DES types, preparation, structures, and influencing factors is provided. Furthermore, the potential and disadvantages of using DESs to extract biomolecules were assessed. We concluded that DES is a viable alternative for extracting polyphenols, carbohydrates, and lipids as well as use in food safety monitoring and biosensor development. However, more work is needed to address shortcomings, and determine whether using compounds extracted with DES can be consumed safely.

Hydrophobic Deep Eutectic Solvents as Greener Substitutes for Conventional Extraction Media: Examples and Techniques

Deep eutectic solvents (DESs) are multicomponent designer solvents that exist as stable liquids over a wide range of temperatures. Over the last two decades, research has been dedicated to developing noncytotoxic, biodegradable, and biocompatible DESs to replace commercially available toxic organic solvents. However, most of the DESs formulated until now are hydrophilic and disintegrate via dissolution on coming in contact with the aqueous phase. To expand the repertoire of DESs as green solvents, hydrophobic DESs (HDESs) were prepared as an alternative. The hydrophobicity is a consequence of the constituents and can be modified according to the nature of the application. Due to their immiscibility, HDESs induce phase segregation in an aqueous solution and thus can be utilized as an extracting medium for a multitude of compounds. Here, we review literature reporting the usage of HDESs for the extraction of various organic compounds and metal ions from aqueous solutions and absorption of gases like CO₂. We also discuss the techniques currently employed in the extraction processes. We have delineated the limitations that might reduce the applicability of these solvents and also discussed examples of how DESs behave as reaction media. Our review presents the possibility of HDESs being used as substitutes for conventional organic solvents.

Simultaneous Dispersive Liquid-Liquid Microextraction and Determination of Different Polycyclic Aromatic Hydrocarbons in Surface Water

Polycyclic aromatic hydrocarbons (PAHs) are a class of persistent organic pollutants of water, and their determination at trace levels in the aquatic ecosystems is essential. In this work, an ultrasound-assisted dispersive liquid-liquid microextraction (DLLME) procedure was suggested utilizing a binary dispersive agent for recovery of different molecular weight polycyclic aromatic hydrocarbons (PAHs) from waters. The detection was carried out by gas chromatography-mass spectrometry (GC-MS) as well as high-performance liquid chromatography with fluorescence and diode-array detection (HPLC-FD/PDA). The method was optimized for the extraction of analytes with respect to the mixture composition, ratios of components, ultrasonication time and centrifugation parameters. The analytical schemes for PAHs extraction from water samples using different ratios of extraction and dispersive solvents are reported. The mixture consisting of chloroform and methanol was applied for the extraction of PAHs containing two or three fused aromatic rings; the mixture of chloroform and acetonitrile is suitable for PAHs containing more than four aromatic rings. The mixture of chloroform:acetone + acetonitrile was applied in the universal scheme and allowed for the simultaneous extraction of 20 PAHs with different structures. The developed sample preparation schemes were combined with GC-MS and HPLC-FD/PDA, which allowed us to determine the analytes at low concentrations (from 0.0002 µg/L) with the recoveries exceeding 80% and relative standard deviations of about 8%. The developed methods for the determination of 20 PAHs were applied to the analysis of water samples from the Karasun Lake (Krasnodar), Azov Sea (Temryuk) and Black Sea (Sochi).

Natural Deep Eutectic Solvent-Based Dispersive Liquid-Liquid Microextraction Coupled with Direct Analysis in Real Time Mass Spectrometry: A Green Temperature-Mediated Analytical Strategy

Green analytical chemistry (GAC) represents a rapidly growing research field that aims at developing novel analytical approaches with minimal consumption of hazardous reagents and solvents. The current study reports on a GAC methodology exploiting the unique physicochemical properties of natural deep eutectic solvents (NADESs), a supposedly environmentally friendly class of solvents. Based on a temperature-mediated strategy, the NADESs were manipulated to undergo multiple phase transitions for favorable functionality and performance. As proof-of-concept demonstrations, both hydrophobic and hydrophilic NADESs were prepared for the extraction and analysis of eight phthalate esters in aqueous samples (food simulants) and three aflatoxins in oily samples (edible oils), respectively. NADES-based dispersive liquid-liquid microextraction (DLLME) was employed to achieve high-efficiency sample pretreatment. Afterward, the NADESs were transformed from liquids into solids by tuning the peripheral temperature for a convenient phase separation from the sample matrices. The solidified NADES extracts were melted and vaporized at elevated temperatures by transmission-mode direct analysis in real time (DART) for further quadrupole-Orbitrap high-resolution mass spectrometry (Q-Orbitrap HRMS) analysis. The developed protocol was validated, achieving good repeatability with relative standard deviations (RSDs) of less than 9% and satisfactory sensitivity with limits of detection (LODs) and quantitation (LOQs) ranging from 0.1 to 0.8 and 0.2 to 2.0 μg/kg, respectively. The greenness of the analytical methodology was assessed with the calculated scores of 0.66 and 0.57 for the hydrophobic and hydrophilic NADES-based protocols, respectively. The method was applied to marketed samples, highlighting the great potential for green chemical analysis.

Enhancing the electrochemical sensitivity of hydroquinone using a hydrophobic deep eutectic solvent-based carbon paste electrode

The present study reports the synthesis and characterization of hydrophobic deep eutectic solvents (HDES) based on fatty acids and tetrabutylammonium bromide (TBAB) or 1-octanol using Fourier transform infrared spectroscopy, and the analysis of the physicochemical properties (viscosity, density, electrical conductivity, and water content) of these solvents. A carbon paste electrode modified with 6.0% (m/m) decanoic acid and TBAB-based HDES was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The oxidation peak currents of the proposed electrode were enhanced by its high electrochemical activity, fast electron transfer rate, and high surface area, while a remarkable decrease was observed in the peak potential separation. The electrochemical determination of hydroquinone (H₂Q) was carried out using square-wave adsorptive anodic stripping voltammetry (SWAdASV). The electrode response was found to be linear in the H₂Q concentration range of 2.5 × 10^-6-3.0 × 10^-3 mol L^-1, with the limit of detection (LOD) of 7.7 × 10^-7 mol L^-1. The method was successfully applied for H₂Q determination in dermatological creams.

Facile liquid colorimetric sensor using high-density deep eutectic solvent for trace detection and speciation of iron in milk

An efficient colorimetric sensor was developed using a high-density deep eutectic solvent (HD-DES) for the trace detection and speciation of iron in various milk samples. A liquid colorimetric probe was fabricated by dissolving ferrozine (FZ) in HD-DES prepared from TBABr and PBA. The prederivatization of Fe²⁺ via complexation with FZ on the HD-DES/FZ probe provided the [Fe(FZ)₃]^4- complex, which led to a color change from pale yellow to purple before it was simultaneously extracted by HD-DES. The Fe³⁺ content was calculated by subtracting the amount of Fe²⁺ from the total Fe content following the reduction of Fe³⁺ to Fe²⁺ by L-ascorbic acid in an acid buffer. Under the optimized conditions, the proposed colorimetric sensor exhibited appreciable linearity in the concentration range of 0.003-0.04 mg L^-1, a low limit of detection (0.95 µg L^-1), high enrichment factor (50), and outstanding repeatability. The liquid colorimetric probe was successfully applied for the determination and speciation of iron in milk samples, and the results were compared with those obtained using the standard atomic absorption spectrometry method. Moreover, quantitative analysis was performed on a smartphone using the Image J application to estimate the color intensity change, which eliminated the requirement of sophisticated scientific instruments.

Application of Extraction and Determination Based on Deep Eutectic Solvents in Different Types of Environmental Samples

Water sources are an indispensable resource for human survival. Monitoring the pollution status of the surrounding environment is necessary to protect water sources. Research on the environmental matrix of deep eutectic solvents (DESs) has expanded rapidly because of their high extraction efficiency for various target analytes, controllable synthesis, and versatile structure. Following the synthesis of hydrophobic deep eutectic solvents (HDESs), their application in aqueous matrices broadened greatly. The present review conducted a survey on the pollutant extraction methods based DESs in environmental matrices from two aspects, application methods and matrix types; discussed the potential risk of DESs to the environment and future development trends; and provided some references for researchers to choose DES-based extraction methods for environmental research.

Deep Eutectic Solvents as Promising Green Solvents in Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplet: Recent Applications, Challenges and Future Perspectives

Deep eutectic solvents (DESs) have recently attracted attention as a promising green alternative to conventional hazardous solvents by virtue of their simple preparation, low cost, and biodegradability. Even though the application of DESs in analytical chemistry is still in its early stages, the number of publications on this topic is growing. Analytical procedures applying dispersive liquid-liquid microextraction based on the solidification of floating organic droplets (DLLME-SFOD) are among the more appealing approaches where DESs have been found to be applicable. Herein, we provide a summary of the articles that are concerned with the application of DESs in the DLLME-SFOD of target analytes from diverse samples to provide up-to-date knowledge in this area. In addition, the major variables influencing enrichment efficiency and the microextraction mechanism are fully investigated and explained. Finally, the challenges and future perspectives of applying DESs in DLLME-SFOD are thoroughly discussed and are critically analyzed.

Comparing the extraction performance of cyclodextrin-containing supramolecular deep eutectic solvents versus conventional deep eutectic solvents by headspace single drop microextraction

A headspace single drop microextraction (HS-SDME) method coupled with high performance liquid chromatography was developed to compare the extraction of eighteen aromatic organic pollutants from aqueous solutions using cyclodextrin-based supramolecular deep eutectic solvents (SUPRADESs) and alkylammonium halide-based conventional deep eutectic solvents (DESs). Different derivatives of beta-cyclodextrin (β-CD) were employed as hydrogen bond acceptors (HBA) in SUPRADESs and the extraction performance investigated. SUPRADES comprised of the 20 wt% native β-CD HBA provided the highest enrichment factors of analytes compared to SUPRADESs comprised of other derivatives of β-CD (random methylated β-cyclodextrin, heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin, and 2-hydroxypropyl β-cyclodextrin). In addition, native β-CD and its derivatives were dissolved in the neat DESs and their effect on the extraction of analytes examined. Dissolution of 20 wt% native β-CD in the choline chloride ([Ch⁺][Cl^-]):2Urea DES resulted in a significant increase in the extraction efficiencies of target analytes compared to the neat [Ch⁺][Cl^-]:2Urea DES. Under optimum conditions, the extraction method required a solvent microdroplet of 6.5 μL, 1000 rpm stir rate, 30% (w/v) salt concentration, and a temperature of 40 °C. The tetrabutylammonium chloride: 2 lactic acid DES resulted in the highest enrichment factors while the [Ch⁺][Cl^-]:2Urea DES had the lowest for most of the analytes among the evaluated solvents. The method provided limits of detection (LODs) down to 35 μg L^-1. Furthermore, the developed method was applied for the analysis of spiked tap and lake water, where relative recoveries ranging from 83.7% ̶ 119.7% and relative standard deviations lower than 19.2% were achieved.

A novel liquid colorimetric probe for highly selective and sensitive detection of lead (II)

A novel liquid colorimetric sensor based on deep eutectic solvent (DES) was developed for the preconcentration and detection of Pb²⁺ in fruit juice, milk and cereal samples. The colorimetric probe was simply fabricated by adding dithizone (DZ) into DES, prepared from choline chloride and phenol. Pb²⁺ was formed complex with DZ in the probe, providing hydrophobic complex of [Pb-DZ] which was simultaneously extracted into DES and the color was changed from light orange to carmine red. The enriched [Pb-DZ] in DES was detected using spectrophotometer at 520 nm and naked-eyes. In addition, a smartphone in combination with an Image J program was used as an alternative detection device. Under optimal conditions, the enrichment factor was 92 with LOD of 2.1 µg L^-1 and the linear range was 0.007-0.075 mg L^-1. The proposed liquid colorimetric sensor was successfully applied for Pb²⁺ detection in various food samples and the results were in good agreement with those obtained by FAAS. The advantages of this method are simple, rapid, environmental friendly and low cost.

Recent Applications of Deep Eutectic Solvents in Environmental Analysis

The incessant generation of toxic waste and the growing concern over the environment have led the scientific community to delve into the search for more sustainable systems. In this regard, the application of deep eutectic solvents (DESs) has become one of the main strategies in green chemistry. These solvents have emerged as a promising alternative to conventional toxic solvents and even to the well-known ionic liquids. Their unique properties, components availability, and easy preparation, among others, have led to a new trend within the scientific community and industry, based on the use of these up-and-coming solvents not only in science but also in quotidian life. Among the areas that have benefited from the advantages of DESs is analytical chemistry, in which they have been largely used for sample preparation, including the extraction and determination of organic and inorganic compounds from environmental samples. The considerable number of applications developed in the last year in this field and the increasing generation of new data necessitate the continuous updating of the literature. This review pretends to compile the most relevant applications of DESs in environmental analysis and critically discuss them to provide a global vision about the advantages and drawbacks/limitations of these neoteric solvents in the area of environmental analysis.

A density-tunable liquid-phase microextraction system based on deep eutectic solvents for the determination of polycyclic aromatic hydrocarbons in tea, medicinal herbs and liquid foods

A novel density-tunable liquid-phase microextraction (DT-LPME) system was developed with high-density deep eutectic solvents (DESs) as extractant and low-density organic solvents as emulsifier and density regulator. DES-rich phase was induced to form in the bottom or in the top by adjusting the emulsifier amount. This system was used to directly extract polycyclic aromatic hydrocarbons (PAHs) from liquid and solid foods, and the obtained DES-rich phase was easy to be collected for quantification. The method (LPME with HPLC-fluorescence detector) has linearity (R² > 0.9974), detection limits of 0.6-4.2 ng L^-1 for liquid foods and 0.05-0.35 ng g^-1 for solid foods, recoveries of 86.2-114.9%, and intra-day/inter-day RSDs below 6.6%. The method was applied to detect PAHs in real samples, and the PAHs residue was found in honey and five solid foods. The DT-LPME method is simple, fast, green and suitable for direct extraction of analytes from both liquid and solid samples.

A rapid and simple method for the removal of dyes and organophosphorus pesticides from water and soil samples using deep eutectic solvent embedded sponge

A new treatment method using a deep eutectic solvent embedded melamine sponge (DES-MS) was studied for the removal of organic pollutants from water and soil samples. Five organophosphorus pesticides (OPPs) consisting of azinphos-methyl (AZP), parathion-methyl (PRT), fenitrothion (FNT), diazinon (DIZ) and chlorpyrifos (CPF), and two dyes including acid blue 29 (AB29) and malachite green (MG) were used as the model pollutants. DESs were easily prepared from tetrabutylammonium bromide (TBABr) and various fatty acids. The synthesised DESs were loaded into the sponge before being utilized for the removal of the studied pollutants. After the removal, the residual OPPs or dyes in the supernatant was quantified by high performance liquid chromatography or derivative spectrophotometry, respectively. The proposed method was simple, rapid, environmentally friendly and effective with the removal efficiency higher than 70% for various samples. Moreover, the removal of various dyes was successfully achieved with the efficiency greater than 65% under the optimum condition.

A novel dispersive liquid-liquid microextraction using a low density deep eutectic solvent-gas chromatography tandem mass spectrometry for the determination of polycyclic aromatic hydrocarbons in soft drinks

Ready-to-drink teas can provide, if properly packaged, the taste and wellness character of traditional teas. Nevertheless, in tea processing, there may be several contaminations, among which polycyclic aromatic hydrocarbons (PAHs), anthropogenic contaminants that can present carcinogenic and mutagenic properties. In this work, a novel low-density deep eutectic solvent-based dispersive liquid-liquid microextraction (LDDES-DLLME) procedure followed by gas chromatography tandem mass spectrometry (GC-MS/MS) was optimized for analysis of 15 polycyclic aromatic hydrocarbons (PAHs) in ready-to-drink herbal-based beverages. The new deep eutectic solvent (DES) was synthesized with natural compounds (camphor and hexanoic acid). Several parameters of the extraction procedure such as type and volume of extraction solvent, type, volume of dispersive solvent, and time of extraction were evaluated to achieve the highest yield and to attain the lowest detection limits. The validated method showed very low limits of detection (0.01 μg L^-1) and quantification (0.2 μg L^-1), good inter- and intra-day precisions (RSD<16.87%), and recoveries higher than 69%. The method was applied to 16 type of samples and it was found total PAHs levels ranging from 0.20 to 1.82 μg L^-1. The developed LDDES-DLLME showed a reliable and innovative alternative for the extraction of PAHs from beverages, cost-effective and environmentally friendly, and providing a satisfactory throughput.

Deep Eutectic Solvent-Based Microextraction of Lead(II) Traces from Water and Aqueous Extracts before FAAS Measurements

Microextraction procedures for the separation of Pb(II) from water and food samples extracts were developed. A deep eutectic solvent composed of α-benzoin oxime and iron(III) chloride dissolved in phenol was applied as a phase separator support. In addition, this deep eutectic mixture worked as an efficient extractor of Pb(II). The developed microextraction process showed a high ability to tolerate the common coexisting ions in the real samples. The optimum conditions for quantitative recoveries of Pb(II) from aqueous extracts were at pH 2.0, conducted by adding 150 µL from the deep eutectic solvent. The quantitative recoveries were obtained with various initial sample volumes up to 30 mL. Limits of detection and limits of quantification of 0.008 and 0.025 µg L^-1 were achieved with a relative standard deviation (RSD%) of 2.9, which indicates the accuracy and sensitivity of the developed procedure. Recoveries from the reference materials, including TMDA 64.2, TMDA 53.3, and NCSDC-73349, were 100%, 97%, and 102%, respectively. Real samples, such as tap, lake, and river water, as well as food samples, including salted peanuts, chickpeas, roasted yellow corn, pistachios, and almonds, were successfully applied for Pb(II) analysis by atomic absorption spectroscopy (AAS) after applying the developed deep eutectic solvent-based microextraction procedures.

Recent Application of Deep Eutectic Solvents as Green Solvent in Dispersive Liquid-Liquid Microextraction of Trace Level Chemical Contaminants in Food and Water

As growing concerns on green, cost-effective, and time-saving chemistry analysis methods, deep eutectic solvents (DESs) are considered to be promising green alternatives to conventional solvents in dispersive liquid-liquid microextraction (DLLME) of trace level chemical contaminants in food and water, due to their biodegradability, low cost, and simple preparation. In the past few years, numerous innovative researches have focused on preconcentration of trace level chemical contaminants using DESs as extractant. In this context, this review aims to summarize the updated state-of-the-art effort dedicated to preconcentration of trace level chemical contaminants in food and water sample using DESs as extractants in DLLME. Furthermore, the major impact factors affecting the preconcentration efficiency and process mechanisms are thoroughly analyzed and discussed. Finally, prospects and challenges in application of DESs as solvents in DLLME to enrich trace level chemical contaminants are extensively elucidated and critically reviewed.

Recent Advances in the Extraction of Polycyclic Aromatic Hydrocarbons from Environmental Samples

Polycyclic aromatic hydrocarbons (PAHs) comprise a group of chemical compounds consisting of two or more fused benzene rings. PAHs exhibit hydrophobicity and low water solubility, while some of their members are toxic substances resistant to degradation. Due to their low levels in environmental matrices, a preconcentration step is usually required for their determination. Nowadays, there is a wide variety of sample preparation techniques, including micro-extraction techniques (e.g., solid-phase microextraction and liquid phase microextraction) and miniaturized extraction techniques (e.g., dispersive solid-phase extraction, magnetic solid-phase extraction, stir bar sorptive extraction, fabric phase sorptive extraction etc.). Compared to the conventional sample preparation techniques, these novel techniques show some benefits, including reduced organic solvent consumption, while they are time and cost efficient. A plethora of adsorbents, such as metal-organic frameworks, carbon-based materials and molecularly imprinted polymers, have been successfully coupled with a wide variety of extraction techniques. This review focuses on the recent advances in the extraction techniques of PAHs from environmental matrices, utilizing novel sample preparation approaches and adsorbents.

Critical review of micro-extraction techniques used in the determination of polycyclic aromatic hydrocarbons in biological, environmental and food samples

Polycyclic Aromatic Hydrocarbons (PAHs) are ubiquitous environmental contaminants and their accurate determination is very important to human health and environment safety. In this review, sorptive-based micro-extraction techniques [such as Solid-Phase Micro-extraction (SPME), Stir Bar Sorptive Extraction (SBSE), Micro-extraction in Packed Sorbent (MEPS)] and solvent-based micro-extraction [Membrane-Mediated Liquid-Phase Micro-extraction (MM-LPME), Dispersive Liquid-Liquid Micro-extraction (DLLME), and Single Drop Micro-extraction (SDME)] developed for quantification of PAHs in environmental, biological and food samples are reviewed. Moreover, recent micro-extraction techniques that have been coupled with other sample extraction strategies are also briefly discussed. The main objectives of these micro-extraction techniques are to perform extraction, pre-concentration and clean up together as one step, and the reduction of the analysis time, cost and solvent following the green chemistry guidelines.

Quest for Green-Solvent Design: From Hydrophilic to Hydrophobic (Deep) Eutectic Solvents

Deep eutectic solvents (DESs) consist of a mixture of two or more solid components, which gives rise to a lower melting point compared to the starting materials. Until recently only hydrophilic DESs were available, and despite their revolutionary role in the alternative-solvents field, important issues in chemistry, and chemical engineering (such as water-related problems and the replacement of toxic volatile organic compounds) could not be tackled. Hydrophobic (deep)-here in parenthesis due to the different depths of the eutectic melting points-eutectic solvents are a subclass of DESs where both components are hydrophobic. The low toxicity, high biodegradability, and straightforward preparation without further purification steps of naturally occurring low-cost compounds are among the key advantages. Although research on hydrophobic DESs is scarce (the first report was only published in 2015), some interesting features and applications have been reported and deserve to be evaluated and comparisons established. This Minireview is divided into two parts: The first part provides a brief general introduction to DESs and the second part discusses the nomenclature using solid-liquid phase diagram analysis, chemical stability, thermophysical properties comparison, and finally the most important emerging fields of application.

Organic Analysis of Environmental Samples Using Liquid Chromatography with Diode Array and Fluorescence Detectors: An Overview

This overview is focused to provide an useful guide of the families of organic pollutants that can be determined by liquid chromatography operating in reverse phase and ultraviolet/fluorescence detection. Eight families have been classified as the main groups to be considered: carbonyls, carboxyls, aromatics, phenols, phthalates, isocyanates, pesticides and emerging. The references have been selected based on analytical methods used in the environmental field, including both the well-established procedures and those more recently developed.