Flocculation protein structure and cell–cell adhesion mechanism in Saccharomyces cerevisiae

Flocculation Mechanisms in Brettanomyces bruxellensis: Influence of ethanol and sulfur dioxide on FLO gene expression

The mechanisms underlying flocculation in Brettanomyces bruxellensis, unlike the well-characterized FLO-family gene regulation in Saccharomyces cerevisiae, remain largely unexplored. This study investigates the flocculant phenotypes of 99 B. bruxellensis strains, revealing that only a minority exhibits this clumping behavior and confirms its strain-dependent attitude. Focusing on two strains, CBS2499 (flocculant) and UMY321 (non-flocculant), genetic analysis uncovered polymorphisms and distinct allelic heterozygosity in the FLO1 and FLO11 genes, potentially linked to the phenotypic differences. To further examine these traits, Response Surface Methodology (RSM) was used to simulate oenological conditions, testing the impact of pH, ethanol, and sulfur dioxide (SO₂) levels on flocculation and gene expression. The findings revealed that environmental stressors, especially ethanol and SO₂, significantly increase the expression of FLO1 and FLO11 in CBS2499, indicating a regulatory role in flocculation under stress. These insights broaden our understanding of stress adaptation in B. bruxellensis, especially its survival strategies in wine environments. By elucidating factors influencing flocculation, this study contributes valuable knowledge for managing B. bruxellensis spoilage, potentially aiding in the development of targeted approaches to reduce its impact on wine quality.

Biofilm-based immobilized fermentation of engineered Komagataella phaffii for xylanase production

This study presented an immobilized fermentation process of engineered Komagataella phaffii with improved biofilm-forming abilities for continuous xylanase production and provided the first insights into the molecular basis of biofilm-based immobilized fermentation of K. phaffii. Overexpression of PAS_chr2-2_0178 and PAS_FragB_0067 in K. phaffii facilitated biofilm formation with 31.6% and 113.8% increasement, respectively. Subsequently, a biofilm-based immobilized fermentation process was developed for the PAS_FragB_0067-overexpressing strain. Xylanase production over five batches by GS115-0067* was better than that of GS115-xyn, with an overall average of 35.4 % higher enzyme activity. PAS_FragB_0067 overexpression resulted in better adhesion of K. phaffii cells on the carrier, and enhanced biofilms could provide more active cells in the immobilized fermentation process. Transcriptome analysis revealed that overexpression of the biofilm-related gene promoted central carbon metabolism. These findings offer a valuable reference strategy to improve production efficiency of K. phaffii cells in continuous fermentation processes.

Yeast surface display technology: Mechanisms, applications, and perspectives

Microbial cell surface display technology, which relies on genetically fusing heterologous target proteins to the cell wall through fusion with cell wall anchor proteins, has emerged as a promising and powerful method with diverse applications in biotechnology and biomedicine. Compared to classical intracellular or extracellular expression (secretion) systems, the cell surface display strategy stands out by eliminating the necessity for enzyme purification, overcoming substrate transport limitations, and demonstrating enhanced activity, stability, and selectivity. Unlike phage or bacterial surface display, the yeast surface display (YSD) system offers distinct advantages, including its large cell size, ease of culture and genetic manipulation, the use of generally regarded as safe (GRAS) host cell, the ability to ensure correct folding of complex eukaryotic proteins, and the potential for post-translational modifications. To date, YSD systems have found widespread applications in protein engineering, waste biorefineries, bioremediation, and the production of biocatalysts and biosensors. This review focuses on detailing various strategies and mechanisms for constructing YSD systems, providing a comprehensive overview of both fundamental principles and practical applications. Finally, the review outlines future perspectives for developing novel forms of YSD systems and explores potential applications in diverse fields.

Unconventional Yeasts Isolated from Chilean Honey: A Probiotic and Phenotypic Characterization

This study explores the potential probiotic properties of yeasts isolated from various Chilean honeys, focusing on Ulmo, Quillay, and Mountain honeys. Six yeast strains were identified, including Zygosaccharomyces rouxii, Candida sp., Schizosaccharomyces pombe, Rhodosporidiobolus ruineniae, Clavispora lusitaniae, and Metschnikowia chrysoperlae. Phenotypic characterization involved assessing their fermentative performance, ethanol and hops resistance, and cross-resistance. Ethanol concentration emerged as a limiting factor in their fermentative performance. The probiotic potential of these yeasts was evaluated based on resistance to high temperatures, low pH, auto-aggregation capacity, survival in simulated in vitro digestion (INFOGEST method), and antimicrobial activity against pathogens like Escherichia coli, Staphylococcus aureus, and Salmonella enteritidis. Three yeasts, Zygosaccharomyces rouxii, Schizosaccharomyces pombe, and Metschnikowia chrysoperlae, exhibited potential probiotic characteristics by maintaining cell concentrations exceeding 106 CFU/mL after in vitro digestion. They demonstrated fermentative abilities and resistance to ethanol and hops, suggesting their potential as starter cultures in beer production. Despite revealing promising probiotic and technological aspects, further research is necessary to ascertain their viability in producing fermented foods. This study underscores the innovative potential of honey as a source for new probiotic microorganisms and highlights the need for comprehensive investigations into their practical applications in the food industry.

The influence of flocculation upon global gene transcription in a yeast CYC8 mutant

The transcriptome from a Saccharomyces cerevisiae tup1 deletion mutant was one of the first comprehensive yeast transcriptomes published. Subsequent transcriptomes from tup1 and cyc8 mutants firmly established the Tup1-Cyc8 complex as predominantly acting as a repressor of gene transcription. However, transcriptomes from tup1/cyc8 gene deletion or conditional mutants would all have been influenced by the striking flocculation phenotypes that these mutants display. In this study, we have separated the impact of flocculation from the transcriptome in a cyc8 conditional mutant to reveal those genes (i) subject solely to Cyc8p-dependent regulation, (ii) regulated by flocculation only and (iii) regulated by Cyc8p and further influenced by flocculation. We reveal a more accurate list of Cyc8p-regulated genes that includes newly identified Cyc8p-regulated genes that were masked by the flocculation phenotype and excludes genes which were indirectly influenced by flocculation and not regulated by Cyc8p. Furthermore, we show evidence that flocculation exerts a complex and potentially dynamic influence upon global gene transcription. These data should be of interest to future studies into the mechanism of action of the Tup1-Cyc8 complex and to studies involved in understanding the development of flocculation and its impact upon cell function.

Selected cachaça yeast strains share a genomic profile related to traits relevant to industrial fermentation processes

The isolation and selection of yeast strains to improve the quality of the cachaça-Brazilian Spirit-have been studied in our research group. Our strategy considers Saccharomyces cerevisiae as the predominant species involved in sugarcane juice fermentation and the presence of different stressors (osmolarity, temperature, ethanol content, and competition with other microorganisms). It also considers producing balanced concentrations of volatile compounds (higher alcohols and acetate and/or ethyl esters), flocculation capacity, and ethanol production. Since the genetic bases behind these traits of interest are not fully established, the whole genome sequencing of 11 different Saccharomyces cerevisiae strains isolated and selected from different places was analyzed to identify the presence of a specific genetic variation common to cachaça yeast strains. We have identified 20,128 single-nucleotide variants shared by all genomes. Of these shared variants, 37 were new variants (being six missenses), and 4,451 were identified as missenses. We performed a detailed functional annotation (using enrichment analysis, protein-protein interaction network analysis, and database and in-depth literature searches) of these new and missense variants. Many genes carrying these variations were involved in the phenotypes of flocculation, tolerance to fermentative stresses, and production of volatile compounds and ethanol. These results demonstrate the existence of a genetic profile shared by the 11 strains under study that could be associated with the applied selective strategy. Thus, this study points out genes and variants that may be used as molecular markers for selecting strains well suited to the fermentation process, including genetic improvement by genome editing, ultimately producing high-quality beverages and adding value.IMPORTANCEThis work demonstrates the existence of new genetic markers related to different phenotypes used to select yeast strains and mutations in genes directly involved in producing flavoring compounds and ethanol, and others related to flocculation and stress resistance.

The origins of the Guinness stout yeast

Beer is made via the fermentation of an aqueous extract predominantly composed of malted barley flavoured with hops. The transforming microorganism is typically a single strain of Saccharomyces cerevisiae, and for the majority of major beer brands the yeast strain is a unique component. The present yeast used to make Guinness stout brewed in Dublin, Ireland, can be traced back to 1903, but its origins are unknown. To that end, we used Illumina and Nanopore sequencing to generate whole-genome sequencing data for a total of 22 S. cerevisiae yeast strains: 16 from the Guinness collection and 6 other historical Irish brewing. The origins of the Guinness yeast were determined with a SNP-based analysis, demonstrating that the Guinness strains occupy a distinct group separate from other historical Irish brewing yeasts. Assessment of chromosome number, copy number variation and phenotypic evaluation of key brewing attributes established Guinness yeast-specific SNPs but no specific chromosomal amplifications. Our analysis also demonstrated the effects of yeast storage on phylogeny. Altogether, our results suggest that the Guinness yeast used today is related to the first deposited Guinness yeast; the 1903 Watling Laboratory Guinness yeast.

Systematic analysis of tup1 and cyc8 mutants reveals distinct roles for TUP1 and CYC8 and offers new insight into the regulation of gene transcription by the yeast Tup1-Cyc8 complex

The Tup1-Cyc8 complex in Saccharomyces cerevisiae was one of the first global co-repressors of gene transcription discovered. However, despite years of study, a full understanding of the contribution of Tup1p and Cyc8p to complex function is lacking. We examined TUP1 and CYC8 single and double deletion mutants and show that CYC8 represses more genes than TUP1, and that there are genes subject to (i) unique repression by TUP1 or CYC8, (ii) redundant repression by TUP1 and CYC8, and (iii) there are genes at which de-repression in a cyc8 mutant is dependent upon TUP1, and vice-versa. We also reveal that Tup1p and Cyc8p can make distinct contributions to commonly repressed genes most likely via specific interactions with different histone deacetylases. Furthermore, we show that Tup1p and Cyc8p can be found independently of each other to negatively regulate gene transcription and can persist at active genes to negatively regulate on-going transcription. Together, these data suggest that Tup1p and Cyc8p can associate with active and inactive genes to mediate distinct negative and positive regulatory roles when functioning within, and possibly out with the complex.

Whole-Genome Analysis of Starmerella bacillaris CC-PT4 against MRSA, a Non-Saccharomyces Yeast Isolated from Grape

Starmerella bacillaris is often isolated from environments associated with grape and winemaking. S. bacillaris has many beneficial properties, including the ability to improve the flavor of wine, the production of beneficial metabolites, and the ability to biocontrol. S. bacillaris CC-PT4 (CGMCC No. 23573) was isolated from grape and can inhibit methicillin-resistant Staphylococcus aureus and adaptability to harsh environments. In this paper, the whole genome of S. bacillaris CC-PT4 was sequenced and bioinformatics analyses were performed. The S. bacillaris CC-PT4 genome was finally assembled into five scaffolds with a genome size of 9.45 Mb and a GC content of 39.5%. It was predicted that the strain contained 4150 protein-coding genes, of which two genes encoded killer toxin and one gene encoded lysostaphin. It also contains genes encoding F1F0-ATPases, Na(+)/H(+) antiporter, cation/H(+) antiporter, ATP-dependent bile acid permease, major facilitator superfamily (MFS) antiporters, and stress response protein, which help S. bacillaris CC-PT4 adapt to bile, acid, and other stressful environments. Proteins related to flocculation and adhesion have also been identified in the S. bacillaris CC-PT4 genome. Predicted by antiSMASH, two secondary metabolite biosynthesis gene clusters were found, and the synthesized metabolites may have antimicrobial effects. Furthermore, S. bacillaris CC-PT4 carried genes associated with pathogenicity and drug resistance. Overall, the whole genome sequencing and analysis of S. bacillaris CC-PT4 in this study provide valuable information for understanding the biological characteristics and further development of this strain.

Permissive aggregative group formation favors coexistence between cooperators and defectors in yeast

In Saccharomyces cerevisiae, the FLO1 gene encodes flocculins that lead to formation of multicellular flocs, that offer protection to the constituent cells. Flo1p was found to preferentially bind to fellow cooperators compared to defectors lacking FLO1 expression, enriching cooperators within the flocs. Given this dual function in cooperation and kin recognition, FLO1 has been termed a "green beard gene". Because of the heterophilic nature of the Flo1p bond however, we hypothesize that kin recognition is permissive and depends on the relative stability of the FLO1+/flo1- versus FLO1+/FLO1+ detachment force F. We combine single-cell measurements of adhesion, individual cell-based simulations of cluster formation, and in vitro flocculation to study the impact of relative bond stability on the evolutionary stability of cooperation. We identify a trade-off between both aspects of the green beard mechanism, with reduced relative bond stability leading to increased kin recognition at the expense of cooperative benefits. We show that the fitness of FLO1 cooperators decreases as their frequency in the population increases, arising from the observed permissive character (F+- = 0.5 F++) of the Flo1p bond. Considering the costs associated with FLO1 expression, this asymmetric selection often results in a stable coexistence between cooperators and defectors.

Barley Husk Degraded by Fusarium graminearum MH1 Induced Premature Yeast Flocculation

Premature yeast flocculation (PYF) is one of the pivotal problems affecting beer flavor and production. PYF is induced by certain non-starch polysaccharides produced by the degradation of malted barley husks upon the growth of contaminated microorganisms, such as Fusarium graminearum. In this research, the formation mechanism of PYF was uncovered by investigating the secretome of F. graminearum MH1 inoculated to the barley husk. The polysaccharide extract of degraded husk was ultrafiltrated into four fractions and characterized by the minimum PYF concentration, molecular mass distribution, monosaccharide composition, and zeta potential. Among the four fractions, the high-molecular-weight polysaccharide fraction had the highest content of uronic acid and the most negative zeta potential, which contributed to the most severe PYF phenomenon. In addition, the PYF yeast showed a more negative zeta potential than the control yeast during the small-scale brewing process. This is aligned to the negatively charged polysaccharides potentially bonded to the surface of yeast cells through the calcium cation in the same fermentation system, which results in rapid flocculation and precipitation. Approximately 12% of the 214 proteins identified in the Fusarium graminearum MH1 secretome were hemicellulases, which substantially interpreted the mechanism of polysaccharides inducing PYF yeast during beer brewing.

An overview on display systems (phage, bacterial, and yeast display) for production of anticancer antibodies; advantages and disadvantages

Antibodies as ideal therapeutic and diagnostic molecules are among the top-selling drugs providing considerable efficacy in disease treatment, especially in cancer therapy. Limitations of the hybridoma technology as routine antibody generation method in conjunction with numerous developments in molecular biology led to the development of alternative approaches for the streamlined identification of most effective antibodies. In this regard, display selection technologies such as phage display, bacterial display, and yeast display have been widely promoted over the past three decades as ideal alternatives to traditional methods. The display of antibodies on phages is probably the most widespread of these methods, although surface display on bacteria or yeast have been employed successfully, as well. These methods using various sizes of combinatorial antibody libraries and different selection strategies possessing benefits in screening potency, generating, and isolation of high affinity antibodies with low risk of immunogenicity. Knowing the basics of each method assists in the design and retrieval process of antibodies suitable for different diseases, including cancer. In this review, we aim to outline the basics of each library construction and its display method, screening and selection steps. The advantages and disadvantages in comparison to alternative methods, and their applications in antibody engineering will be explained. Finally, we will review approved or non-approved therapeutic antibodies developed by employing these methods, which may serve as therapeutic antibodies in cancer therapy.

The Flo Adhesin Family

The first step in the infection of fungal pathogens in humans is the adhesion of the pathogen to host tissue cells or abiotic surfaces such as catheters and implants. One of the main players involved in this are the expressed cell wall adhesins. Here, we review the Flo adhesin family and their involvement in the adhesion of these yeasts during human infections. Firstly, we redefined the Flo adhesin family based on the domain architectures that are present in the Flo adhesins and their functions, and set up a new classification of Flo adhesins. Next, the structure, function, and adhesion mechanisms of the Flo adhesins whose structure has been solved are discussed in detail. Finally, we identified from Pfam database datamining yeasts that could express Flo adhesins and are encountered in human infections and their adhesin architectures. These yeasts are discussed in relation to their adhesion characteristics and involvement in infections.

Study of potential probiotic and biotechnological properties of non-Saccharomyces yeasts from fruit Brazilian ecosystems

Yeast isolates from flowers and fruits from a Brazilian forest were studied. The yeasts were identified at species and strain level by PCR-RFLP and PCR-RAPD, respectively. The 46 isolated yeasts were classified into 11 different species belonging to the genera Candida, Diutina, Hanseniaspora, Meyerozyma, Pichia, Rhodotorula, and Torulaspora. A total of 20 different strains were found. In order to ascertain the probiotic potential, the resistance to gastrointestinal conditions, autoaggregation, and hydrophobicity assays were studied, along with the capacity to form biofilm. The results indicate that, although most of the strains presented better results than Saccharomyces boulardii (the only strain recognized as a probiotic yeast), four strains were the most promising, namely, Rhodotorula mucilaginosa 32, Meyerozyma caribbica 35, and Diutina rugosa 12 and 45, according to the Duncan test. Several biotechnological properties were evaluated. D. rugosa inhibited Dekkera bruxellensis. The assimilation or fermentation of seven sugars was tested, and only five of the yeasts did not show a capacity to assimilate any of the sugars under aerobic conditions. However, all strains were able to ferment at least one of the sugars under anaerobic conditions. As far as enzyme production is concerned, positive results were only found for the enzymes' amylase, pectinase, and protease. D. rugosa 42 and Hanseniaspora opuntiae 18, followed of Pichia kluyveri 26, showed high values for the production of melatonin. In conclusion, the results of this study show that several non-Saccharomyces present probiotic characteristics, and these have good potential for industrial applications in the food or biotechnology industries.

A Comprehensive Phylogenetic and Bioinformatics Survey of Lectins in the Fungal Kingdom

Fungal lectins are a large family of carbohydrate-binding proteins with no enzymatic activity. They play fundamental biological roles in the interactions of fungi with their environment and are found in many different species across the fungal kingdom. In particular, their contribution to defense against feeders has been emphasized, and when secreted, lectins may be involved in the recognition of bacteria, fungal competitors and specific host plants. Carbohydrate specificities and quaternary structures vary widely, but evidence for an evolutionary relationship within the different classes of fungal lectins is supported by a high degree of amino acid sequence identity. The UniLectin3D database contains 194 fungal lectin 3D structures, of which 129 are characterized with a carbohydrate ligand. Using the UniLectin3D lectin classification system, 109 lectin sequence motifs were defined to screen 1223 species deposited in the genomic portal MycoCosm of the Joint Genome Institute. The resulting 33,485 putative lectin sequences are organized in MycoLec, a publicly available and searchable database. These results shed light on the evolution of the lectin gene families in fungi.

Adhesion Properties, Biofilm Forming Potential, and Susceptibility to Disinfectants of Contaminant Wine Yeasts

In this study, yeasts isolated from filter membranes used for the quality control of bottled wines were identified and tested for their resistance to some cleaning agents and potassium metabisulphite, adhesion to polystyrene and stainless-steel surfaces, and formation of a thin round biofilm, referred to as a MAT. A total of 40 strains were identified by rRNA internal transcribed spacer (ITS) restriction analysis and sequence analysis of D1/D2 domain of 26S rRNA gene. Strains belong to Pichia manshurica (12), Pichia kudriavzevii (9), Pichia membranifaciens (1), Candida sojae (6), Candida parapsilosis (3), Candida sonorensis (1), Lodderomyces elongisporus (2), Sporopachydermia lactativora (3), and Clavispora lusitaniae (3) species. Regarding the adhesion properties, differences were observed among species. Yeasts preferred planktonic state when tested on polystyrene plates. On stainless-steel supports, adhered cells reached values of about 6 log CFU/mL. MAT structures were formed only by yeasts belonging to the Pichia genus. Yeast species showed different resistance to sanitizers, with peracetic acid being the most effective and active at low concentrations, with minimum inhibitory concentration (MIC) values ranging from 0.08% (v/v) to 1% (v/v). C. parapsilosis was the most sensible species. Data could be exploited to develop sustainable strategies to reduce wine contamination and establish tailored sanitizing procedures.

The microbial challenge of winemaking: yeast-bacteria compatibility

The diversity and complexity of wine environments present challenges for predicting success of fermentation. In particular, compatibility between yeast and lactic acid bacteria is affected by chemical and physical parameters that are strain and cultivar specific. This review focuses on the impact of compound production by microbes and physical interactions between microbes that ultimately influence how yeast and bacteria may work together during fermentation. This review also highlights the importance of understanding microbial interactions for yeast-bacteria compatibility in the wine context.

Identification of flocculant wine yeast strains with improved filtration-related phenotypes through application of high-throughput sedimentation rate assays

In most yeast-driven biotechnological applications, biomass is separated from the aqueous phase after fermentation or production has finished. During winemaking, yeasts are removed after fermentation by racking, filtration, or centrifugation, which add costs to the overall process and may reduce product yield. Theoretically, clarification and filtration can be aided through use of yeast strains that form flocs due to cell-cell binding, a process known as flocculation. However, because early flocculation can cause stuck/sluggish fermentations, this phenotype is not common amongst commercially available wine yeasts. In this study we sought to identify wine strains that exhibit late-fermentation flocculant behaviour using two complementary approaches; a high-throughput sedimentation rate assay of individual strains and a competitive sedimentation assay using a barcoded yeast collection. Amongst 103 wine strains, several exhibited strong sedimentation at the end of the wine fermentation process under various environmental conditions. Two of these strains, AWRI1688 and AWRI1759, were further characterised during red winemaking trials. Shiraz wines produced with both strains displayed improved filtration-related properties. AWRI1759 produced wines with greater filterability, whereas AWRI1688 enabled the recovery of larger wine volumes after racking. Thus, this study demonstrates the effective use of sedimentation screening assays to identify wine yeasts with practical winemaking applications.

Adaptive Evolution of Industrial Brewer’s Yeast Strains towards a Snowflake Phenotype

Flocculation or cell aggregation is a well-appreciated characteristic of industrial brewer’s strains, since it allows removal of the cells from the beer in a cost-efficient and environmentally-friendly manner. However, many industrial strains are non-flocculent and genetic interference to increase the flocculation characteristics are not appreciated by the consumers. We applied adaptive laboratory evolution (ALE) to three non-flocculent, industrial Saccharomyces cerevisiae brewer’s strains using small continuous bioreactors (ministats) to obtain an aggregative phenotype, i.e., the “snowflake” phenotype. These aggregates could increase yeast sedimentation considerably. We evaluated the performance of these evolved strains and their produced flavor during lab scale beer fermentations. The small aggregates did not result in a premature sedimentation during the fermentation and did not result in major flavor changes of the produced beer. These results show that ALE could be used to increase the sedimentation behavior of non-flocculent brewer’s strains.

Disruption of ppr3, ppr4, ppr6 or ppr10 induces flocculation and filamentous growth in Schizosaccharomyces pombe

Pentatricopeptide repeat (PPR) proteins are major players in mitochondrial and chloroplast RNA metabolism, which is essential for normal organellar function. The fission yeast Schizosaccharomyces pombe has 10 PPR proteins. We have previously reported that loss of ppr3, ppr4, ppr6 or ppr10 perturbs iron homeostasis leading to accumulation of reactive oxygen species and apoptotic cell death. In the present study, we show that loss of ppr3, ppr4, ppr6 or ppr10 can cause non-sexual flocculation and filamentous growth of cells. Furthermore, expression of a number of genes encoding cell-surface flocculins and cell wall-remodeling enzymes are induced in these ppr-deletion mutants. We also show that Δppr10 cells, and, to a lesser extent, Δppr4 and Δppr6 cells, exhibited increased tolerance to H2O2 toxicity compared with the wild-type strain. Finally, we found that overexpression of genes involved in iron uptake and/or iron homeostasis could cause the flocculation of wild-type cells. Our findings suggest that an elevated level of intracellular iron in the mutant caused by loss of ppr3, ppr4, ppr6 or ppr10 may result in flocculation and filamentous growth in S. pombe.

Diverse conditions support near-zero growth in yeast: Implications for the study of cell lifespan

Baker's yeast has a finite lifespan and ages in two ways: a mother cell can only divide so many times (its replicative lifespan), and a non-dividing cell can only live so long (its chronological lifespan). Wild and laboratory yeast strains exhibit natural variation for each type of lifespan, and the genetic basis for this variation has been generalized to other eukaryotes, including metazoans. To date, yeast chronological lifespan has chiefly been studied in relation to the rate and mode of functional decline among non-dividing cells in nutrient-depleted batch culture. However, this culture method does not accurately capture two major classes of long-lived metazoan cells: cells that are terminally differentiated and metabolically active for periods that approximate animal lifespan (e.g. cardiac myocytes), and cells that are pluripotent and metabolically quiescent (e.g. stem cells). Here, we consider alternative ways of cultivating Saccharomyces cerevisiae so that these different metabolic states can be explored in non-dividing cells: (i) yeast cultured as giant colonies on semi-solid agar, (ii) yeast cultured in retentostats and provided sufficient nutrients to meet minimal energy requirements, and (iii) yeast encapsulated in a semisolid matrix and fed ad libitum in bioreactors. We review the physiology of yeast cultured under each of these conditions, and explore their potential to provide unique insights into determinants of chronological lifespan in the cells of higher eukaryotes.

Distinctive ligand-binding specificities of tandem PA14 biomass-sensory elements from Clostridium thermocellum and Clostridium clariflavum

Cellulolytic clostridia use a highly efficient cellulosome system to degrade polysaccharides. To regulate genes encoding enzymes of the multi‐enzyme cellulosome complex, certain clostridia contain alternative sigma I (σ^I) factors that have cognate membrane‐associated anti‐σ^I factors (RsgIs) which act as polysaccharide sensors. In this work, we analyzed the structure‐function relationship of the extracellular sensory elements of Clostridium (Ruminiclostridium) thermocellum and Clostridium clariflavum (RsgI3 and RsgI4, respectively). These elements were selected for comparison, as each comprised two tandem PA14‐superfamily motifs. The X‐ray structures of the PA14 modular dyads from the two bacterial species were determined, both of which showed a high degree of structural and sequence similarity, although their binding preferences differed. Bioinformatic approaches indicated that the DNA sequence of promoter of sigI/rsgI operons represents a strong signature, which helps to differentiate binding specificity of the structurally similar modules. The σ^I4‐dependent C. clariflavum promoter sequence correlates with binding of RsgI4_PA14 to xylan and was identified in genes encoding xylanases, whereas the σ^I3‐dependent C. thermocellum promoter sequence correlates with RsgI3_PA14 binding to pectin and regulates pectin degradation‐related genes. Structural similarity between clostridial PA14 dyads to PA14‐containing proteins in yeast helped identify another crucial signature element: the calcium‐binding loop 2 (CBL2), which governs binding specificity. Variations in the five amino acids that constitute this loop distinguish the pectin vs xylan specificities. We propose that the first module (PA14^A) is dominant in directing the binding to the ligand in both bacteria. The two X‐ray structures of the different PA14 dyads represent the first reported structures of tandem PA14 modules.

Cell Wall Surface Properties of Kluyveromyces marxianus Strains From Dairy-Products

Thirty-three Kluyveromyces marxianus strains were tested for the ability to form biofilm and mat structures in YPD and whey and for cell surface hydrophobicity. To identify genes potentially involved in adhesion properties, a RT-qPCR analysis was performed. Eight strains were able to adhere on polystyrene plates in both media and formed a mature mat structure. These strains showed a different level of hydrophobicity ranging from 55 to 66% in YPD and from 69 to 81% in whey. Four K. marxianus orthologs genes (FLO11, STE12, TPK3, and WSC4), known from studies in other yeast to be involved in biofilm formation, have been studied. FLO11 and STE12 showed the highest fold changes in all conditions tested and especially in whey: 15.05 and 11.21, respectively. TPK3 was upregulated only in a strain, and WSC4 in 3 strains. In YPD, fold changes were lower than in whey with STE12 and FLO11 genes showing the highest fold changes. In mat structures FLO11 and STE12 fold changes ranged from 3.6-1.3 to 2-1.17, respectively. Further studies are necessary to better understand the role of these genes in K. marxianus adhesion ability.

Expansion of a Telomeric FLO/ALS-Like Sequence Gene Family in Saccharomycopsis fermentans

Non-Saccharomyces species have been recognized for their beneficial contribution to fermented food and beverages based on their volatile compound formation and their ability to ferment glucose into ethanol. At the end of fermentation brewer's yeast flocculate which provides an easy means of separation of yeasts from green beer. Flocculation in Saccharomyces cerevisiae requires a set of flocculation genes. These FLO-genes, FLO1, FLO5, FLO9, FLO10, and FLO11, are located at telomeres and transcription of these adhesins is regulated by Flo8 and Mss11. Here, we show that Saccharomycopsis fermentans, an ascomycete yeast distantly related to S. cerevisiae, possesses a very large FLO/ALS-like Sequence (FAS) family encompassing 34 genes. Fas proteins are variable in size and divergent in sequence and show similarity to the Flo1/5/9 family. Fas proteins show the general build with a signal peptide, an N-terminal carbohydrate binding PA14 domain, a central region differing by the number of repeats and a C-terminus with a consensus sequence for GPI-anchor attachment. Like FLO genes in S. cerevisiae, FAS genes are mostly telomeric with several paralogs at each telomere. We term such genes that share evolutionary conserved telomere localization "telologs" and provide several other examples. Adhesin expression in S. cerevisiae and filamentation in Candida albicans is regulated by Flo8 and Mss11. In Saccharomycopsis we identified only a single protein with similarity to Flo8 based on sequence similarity and the presence of a LisH domain.

Adhesins of Yeasts: Protein Structure and Interactions

The ability of yeast cells to adhere to other cells or substrates is crucial for many yeasts. The budding yeast Saccharomyces cerevisiae can switch from a unicellular lifestyle to a multicellular one. A crucial step in multicellular lifestyle adaptation is self-recognition, self-interaction, and adhesion to abiotic surfaces. Infectious yeast diseases such as candidiasis are initiated by the adhesion of the yeast cells to host cells. Adhesion is accomplished by adhesin proteins that are attached to the cell wall and stick out to interact with other cells or substrates. Protein structures give detailed insights into the molecular mechanism of adhesin-ligand interaction. Currently, only the structures of a very limited number of N-terminal adhesion domains of adhesins have been solved. Therefore, this review focuses on these adhesin protein families. The protein architectures, protein structures, and ligand interactions of the flocculation protein family of S. cerevisiae; the epithelial adhesion family of C. glabrata; and the agglutinin-like sequence protein family of C. albicans are reviewed and discussed.

Modifying Saccharomyces cerevisiae Adhesion Properties Regulates Yeast Ecosystem Dynamics

Physical contact between yeast species, in addition to better-understood and reported metabolic interactions, has recently been proposed to significantly impact the relative fitness of these species in cocultures. Such data have been generated by using membrane bioreactors, which physically separate two yeast species. However, doubts persist about the degree that the various membrane systems allow for continuous and complete metabolic contact, including the exchange of proteins. Here, we provide independent evidence for the importance of physical contact by using a genetic system to modify the degree of physical contact and, therefore, the degree of asexual intraspecies and interspecies adhesion in yeast. Such adhesion is controlled by a family of structurally related cell wall proteins encoded by the FLO gene family. As previously shown, the expression of specific members of the FLO gene family in Saccharomyces cerevisiae dramatically changes the coadhesion patterns between this yeast and other yeast species. Here, we use this differential aggregation mediated by FLO genes as a model to assess the impact of physical contact between different yeast species on the relative fitness of these species in simplified ecosystems. The identity of the FLO gene has a marked effect on the persistence of specific non-Saccharomyces yeasts over the course of extended growth periods in batch cultures. Remarkably, FLO1 and FLO5 expression often result in opposite outcomes. The data provide clear evidence for the role of physical contact in multispecies yeast ecosystems and suggest that FLO gene expression may be a major factor in such interactions.IMPORTANCE The impact of direct (physical) versus indirect (metabolic) interactions between different yeast species has attracted significant research interest in recent years. This is due to the growing interest in the use of multispecies consortia in bioprocesses of industrial relevance and the relevance of interspecies interactions in establishing stable synthetic ecosystems. Compartment bioreactors have traditionally been used in this regard but suffer from numerous limitations. Here, we provide independent evidence for the importance of physical contact by using a genetic system, based on the FLO gene family, to modify the degree of physical contact and, therefore, the degree of asexual intraspecies and interspecies adhesion in yeast. Our results show that interspecies contact significantly impacts population dynamics and the survival of individual species. Remarkably, different members of the FLO gene family often lead to very different population outcomes, further suggesting that FLO gene expression may be a major factor in such interactions.

Kin discrimination and outer membrane exchange in Myxococcus xanthus: A comparative analysis among natural isolates

Genetically similar cells of the soil bacterium Myxococcus xanthus cooperate at multiple social behaviours, including motility and multicellular development. Another social interaction in this species is outer membrane exchange (OME), a behaviour of unknown primary benefit in which cells displaying closely related variants of the outer membrane protein TraA transiently fuse and exchange membrane contents. Functionally incompatible TraA variants do not mediate OME, which led to the proposal that TraA incompatibilities determine patterns of intercellular cooperation in nature, but how this might occur remains unclear. Using natural isolates from a centimetre-scale patch of soil, we analyse patterns of TraA diversity and ask whether relatedness at TraA is causally related to patterns of kin discrimination in the form of both colony-merger incompatibilities (CMIs) and interstrain antagonisms. A large proportion of TraA functional diversity documented among global isolates is predicted to be contained within this cm-scale population. We find evidence of balancing selection on the highly variable PA14-portion of TraA and extensive transfer of traA alleles across genomic backgrounds. CMIs are shown to be common among strains identical at TraA, suggesting that CMIs are not generally caused by TraA dissimilarity. Finally, it has been proposed that interstrain antagonisms might be caused by OME-mediated toxin transfer. However, we predict that most strain pairs previously shown to exhibit strong antagonisms are incapable of OME due to TraA dissimilarity. Overall, our results suggest that most documented patterns of kin discrimination in a natural population of M. xanthus are not causally related to the TraA sequences of interactants.

A novel chimaeric flocculation protein enhances flocculation in Saccharomyces cerevisiae

Yeast flocculation is the reversible formation of multicellular complexes mediated by lectin-like cell wall proteins binding to neighbouring cells. Strong flocculation can improve the inhibitor tolerance and fermentation performance of yeast cells in second generation bioethanol production. The strength of flocculation increases with the size of the flocculation protein and is strain dependent. However, the large number of internal repeats in the sequence of FLO1 from Saccharomyces cerevisiae S288c makes it difficult to recombinantly express the gene to its full length. In the search for novel flocculation genes resulting in strong flocculation, we discovered a DNA sequence, FLONF, that gives NewFlo phenotype flocculation in S. cerevisiae CEN.PK 113-7D. The nucleotide sequence of the internal repeats of FLONF differed from those of FLO1. We hypothesized that a chimaeric flocculation gene made up of a FLO1 variant derived from S. cerevisiae S288c and additional repeats from FLONF from S. cerevisiae CCUG 53310 would be more stable and easier to amplify by PCR. The constructed gene, FLOw, had 22 internal repeats compared to 18 in FLO1. Expression of FLOw in otherwise non-flocculating strains led to strong flocculation. Despite the length of the gene, the cassette containing FLOw could be easily amplified and transformed into yeast strains of different genetic background, leading to strong flocculation in all cases tested. The developed gene can be used as a self-immobilization technique or to obtain rapidly sedimenting cells for application in e.g. sequential batches without need for centrifugation.

•

A novel gene sequence conferring NewFlo phenotype flocculation was isolated.

•

The chimaeric gene FLOw was constructed from parts of FLO1 and FLONF.

•

Overexpression of FLOw gave strong flocculation in several S. cerevisiae strains.

FLO5 gene controls flocculation phenotype and adhesive properties in a Saccharomyces cerevisiae sparkling wine strain

Flocculation is an important feature for yeast survival in adverse conditions. The natural diversity of flocculating genes in Saccharomyces cerevisiae can also be exploited in several biotechnological applications. Flocculation is mainly regulated by the expression of genes belonging to the FLO family. These genes have a similar function, but their specific contribution to flocculation ability is still unclear. In this study, the distribution of FLO1, FLO5 and FLO8 genes in four S. cerevisiae wine strains was investigated. Subsequently, both FLO1 and FLO5 genes were separately deleted in a flocculent S. cerevisiae wine strain. After gene disruption, flocculation ability and agar adhesion were evaluated. FLO1 and FLO5 genes inheritance was also monitored. All strains presented different lengths for FLO1 and FLO5 genes. Results confirm that in S. cerevisiae strain F6789, the FLO5 gene drives flocculation and influences adhesive properties. Flocculation ability monitoring after a cross with a non-flocculent strain revealed that FLO5 is the gene responsible for flocculation development.

Complete genome sequence and comparative genomics of the probiotic yeast Saccharomyces boulardii

The probiotic yeast, Saccharomyces boulardii (Sb) is known to be effective against many gastrointestinal disorders and antibiotic-associated diarrhea. To understand molecular basis of probiotic-properties ascribed to Sb we determined the complete genomes of two strains of Sb i.e. Biocodex and unique28 and the draft genomes for three other Sb strains that are marketed as probiotics in India. We compared these genomes with 145 strains of S. cerevisiae (Sc) to understand genome-level similarities and differences between these yeasts. A distinctive feature of Sb from other Sc is absence of Ty elements Ty1, Ty3, Ty4 and associated LTR. However, we could identify complete Ty2 and Ty5 elements in Sb. The genes for hexose transporters HXT11 and HXT9, and asparagine-utilization are absent in all Sb strains. We find differences in repeat periods and copy numbers of repeats in flocculin genes that are likely related to the differential adhesion of Sb as compared to Sc. Core-proteome based taxonomy places Sb strains along with wine strains of Sc. We find the introgression of five genes from Z. bailii into the chromosome IV of Sb and wine strains of Sc. Intriguingly, genes involved in conferring known probiotic properties to Sb are conserved in most Sc strains.

Proteomic analysis of the venom and venom sac of the woodwasp, Sirex noctilio - Towards understanding its biological impact

The European horntail woodwasp, Sirex noctilio, is an invasive insect that attacks conifer hosts, particularly Pinus species. Venom injected by female S. noctilio, together with its symbiotic fungus, damages the normal physiology of Pinus, leading to death of the tree. To identify the proteinaceous components in the venom and uncover the interplay between venom proteins and tree proteins, clarification of the overall profile of proteins produced in the venom gland apparatus was carried out in this work. The venom sac proteome utilised in-solution digested in either a natural or deglycosylated state, prior to nanoHPLC LTQ-Orbitrap under CID/ETD mode. Here, we report the identification of 1454 and 1225 proteins in venom and sac, respectively, with 410 mutual proteins. Approximately 90 proteins were predicted to be secretory, of which 8 have features characteristic of toxins. Chemosensory binding proteins were also identified. Gene ontology and KEGG pathway analysis were employed to predict the protein functions and biological pathways in venom and sac. Protein-protein interaction (PPI) analysis suggested that one-step responses represent the majority of the Sirex-Pinus PPIs, and the proteins representing network hub nodes could be of importance for the development of pest management strategies.

SIGNIFICANCE

The woodwasp Sirex noctilio is an invasive species in many parts of the world, including Australia and North America, where it is considered within the top 10 most serious forest insects. Where they have been introduced, the female woodwasps attack living pine trees, causing significant economic losses. Central to this destruction is the woodwasp's life cycle requirement to bore a hole to deposit eggs and a toxic mucus that disables the tree's network for transporting water and nutrients, yet aids in larval survival. Here we specifically examine the mucus gland apparatus and its contents, revealing the protein components that together with 'noctilisin' facilitate this complex association. The identification of chemosensory binding proteins further supports a role for the woodwasp ovipositor as an instrument for early stages of host tree selection. These findings could provide important clues towards the development of novel control tools against this pest.

Expression of AtMed15 of Arabidopsis in yeast causes flocculation and increases ethanol production in yeast culture

Mediator, a multiprotein complex involved in transcription of class II genes, was first discovered in yeast and then characterized in many metazoans revealing a striking structural conservation of the complex. However, sequences of Mediator subunits are not well conserved raising a question on the functional conservation of these individual subunits. In this study, expression of Med15 of Arabidopsis (AtMed15) in gal11∆ yeast could not complement the function of ScGal11 in galactose metabolism and resistance against cycloheximide. Surprisingly, AtMed15 changed the morphology of the yeast cells. The cells adhered strongly on the surface of the agar media, and showed robust flocculation in the liquid media without affecting the growth. The AtMed15-induced adhesion and flocculation were observed in different carbon sources. Calcium-assisted cell wall-bound mannan-binding proteins were found to be involved in this flocculation, which was unaffected by wide fluctuation of pH or temperatures revealing its constitutive robust nature. Expression of few flocculation related Flo genes was up-regulated in these cells. Interestingly, there was significant increase in ethanol production by the yeast expressing AtMed15. Robust and constitutive flocculation and increased ethanol production by yeast cells harbouring AtMed15 indicate an opportunity of its important usage in biotechnology industries.

Involvement of flocculin in negative potential-applied ITO electrode adhesion of yeast cells

The purpose of this study was to develop novel methods for attachment and cultivation of specifically positioned single yeast cells on a microelectrode surface with the application of a weak electrical potential. Saccharomyces cerevisiae diploid strains attached to an indium tin oxide/glass (ITO) electrode to which a negative potential between −0.2 and −0.4 V vs. Ag/AgCl was applied, while they did not adhere to a gallium-doped zinc oxide/glass electrode surface. The yeast cells attached to the negative potential-applied ITO electrodes showed normal cell proliferation. We found that the flocculin FLO10 gene-disrupted diploid BY4743 mutant strain (flo10Δ /flo10Δ) almost completely lost the ability to adhere to the negative potential-applied ITO electrode. Our results indicate that the mechanisms of diploid BY4743 S. cerevisiae adhesion involve interaction between the negative potential-applied ITO electrode and the Flo10 protein on the cell wall surface. A combination of micropatterning techniques of living single yeast cell on the ITO electrode and omics technologies holds potential of novel, highly parallelized, microchip-based single-cell analysis that will contribute to new screening concepts and applications.

Yeast Saccharomyces cerevisiae were selectively attached on the negative potential-applied indium tin oxide/glass electrode. Mechanisms of the yeast cell attachment involve Flocculin Flo10 proteins.

Involvement of glycolysis/gluconeogenesis and signaling regulatory pathways in Saccharomyces cerevisiae biofilms during fermentation

Compared to free (free-living) cells, biofilm cells show increased resistance and stability to high-pressure fermentation conditions, although the reasons underlying these phenomena remain unclear. Here, we investigated biofilm formation with immobilized Saccharomyces cerevisiae cells grown on fiber surfaces during the process of ethanol fermentation. The development of biofilm colonies was visualized by fluorescent labeling and confocal microscopy. RNA from yeast cells at three different biofilm development periods was extracted and sequenced by high-throughput sequencing. We quantitated gene expression differences between biofilm cells and free cells and found that 2098, 1556, and 927 genes were significantly differentially expressed, respectively. We also validated the expression of previously reported genes and identified novel genes and pathways under the control of this system. Statistical analysis revealed that biofilm genes show significant gene expression changes principally in the initial period of biofilm formation compared to later periods. Carbohydrate metabolism, amino acid metabolism, signal transduction, and oxidoreductase activity were needed for biofilm formation. In contrast to previous findings, we observed some differential expression performances of FLO family genes, indicating that cell aggregation in our immobilized fermentation system was possibly independent of flocculation. Cyclic AMP-protein kinase A and mitogen-activated protein kinase pathways regulated signal transduction pathways during yeast biofilm formation. We found that carbohydrate metabolism, especially glycolysis/gluconeogenesis, played a key role in the development of S. cerevisiae biofilms. This work provides an important dataset for future studies aimed at gaining insight into the regulatory mechanisms of immobilized cells in biofilms, as well as for optimizing bioprocessing applications with S. cerevisiae.

Variable flocculation profiles of yeast strains isolated from cachaça distilleries

In cachaça production, the use of yeast cells as starters with predictable flocculation behavior facilitates the cell recovery at the end of each fermentation cycle. Therefore, the aim of this work was to explain the behavior of cachaça yeast strains in fermentation vats containing sugarcane through the determination of biochemical and molecular parameters associated with flocculation phenotypes. By analyzing thirteen cachaça yeast strains isolated from different distilleries, our results demonstrated that neither classic biochemical measurements (e.g., percentage of flocculation, EDTA sensitivity, cell surface hydrophobicity, and sugar residues on the cell wall) nor modern molecular approaches, such as polymerase chain reaction (PCR) and real-time PCR (q-PCR), were sufficient to distinctly classify the cachaça yeast strains according to their flocculation behavior. It seems that flocculation is indeed a strain-specific phenomenon that is difficult to explain and/or categorize by the available methodologies.

Flocculation causes inhibitor tolerance in Saccharomyces cerevisiae for second-generation bioethanol production

Yeast has long been considered the microorganism of choice for second-generation bioethanol production due to its fermentative capacity and ethanol tolerance. However, tolerance toward inhibitors derived from lignocellulosic materials is still an issue. Flocculating yeast strains often perform relatively well in inhibitory media, but inhibitor tolerance has never been clearly linked to the actual flocculation ability per se. In this study, variants of the flocculation gene FLO1 were transformed into the genome of the nonflocculating laboratory yeast strain Saccharomyces cerevisiae CEN.PK 113-7D. Three mutants with distinct differences in flocculation properties were isolated and characterized. The degree of flocculation and hydrophobicity of the cells were correlated to the length of the gene variant. The effect of different strength of flocculation on the fermentation performance of the strains was studied in defined medium with or without fermentation inhibitors, as well as in media based on dilute acid spruce hydrolysate. Strong flocculation aided against the readily convertible inhibitor furfural but not against less convertible inhibitors such as carboxylic acids. During fermentation of dilute acid spruce hydrolysate, the most strongly flocculating mutant with dense cell flocs showed significantly faster sugar consumption. The modified strain with the weakest flocculation showed a hexose consumption profile similar to the untransformed strain. These findings may explain why flocculation has evolved as a stress response and can find application in fermentation-based biorefinery processes on lignocellulosic raw materials.

Molecular recognition in myxobacterial outer membrane exchange: functional, social and evolutionary implications

Through cooperative interactions, bacteria can build multicellular communities. To ensure that productive interactions occur, bacteria must recognize their neighbours and respond accordingly. Molecular recognition between cells is thus a fundamental behaviour, and in bacteria important discoveries have been made. This MicroReview focuses on a recently described recognition system in myxobacteria that is governed by a polymorphic cell surface receptor called TraA. TraA regulates outer membrane exchange (OME), whereby myxobacterial cells transiently fuse their OMs to efficiently transfer proteins and lipids between cells. Unlike other transport systems, OME is rather indiscriminate in what OM goods are transferred. In contrast, the recognition of partnering cells is discriminatory and only occurs between cells that bear identical or closely related TraA proteins. Therefore TraA functions in kin recognition and, in turn, OME helps regulate social interactions between myxobacteria. Here, I discuss and speculate on the social and evolutionary implications of OME and suggest it helps to guide their transition from free-living cells into coherent and functional populations.

Molecular recognition by a polymorphic cell surface receptor governs cooperative behaviors in bacteria

Cell-cell recognition is a fundamental process that allows cells to coordinate multicellular behaviors. Some microbes, such as myxobacteria, build multicellular fruiting bodies from free-living cells. However, how bacterial cells recognize each other by contact is poorly understood. Here we show that myxobacteria engage in recognition through interactions between TraA cell surface receptors, which leads to the fusion and exchange of outer membrane (OM) components. OM exchange is shown to be selective among 17 environmental isolates, as exchange partners parsed into five major recognition groups. TraA is the determinant of molecular specificity because: (i) exchange partners correlated with sequence conservation within its polymorphic PA14-like domain and (ii) traA allele replacements predictably changed partner specificity. Swapping traA alleles also reprogrammed social interactions among strains, including the regulation of motility and conferred immunity from inter-strain killing. We suggest that TraA helps guide the transition of single cells into a coherent bacterial community, by a proposed mechanism that is analogous to mitochondrial fusion and fission cycling that mixes contents to establish a homogenous population. In evolutionary terms, traA functions as a rare greenbeard gene that recognizes others that bear the same allele to confer beneficial treatment.

The mannose-specific lectin domains of Flo1p from Saccharomyces cerevisiae and Lg-Flo1p from S. pastorianus: crystallization and preliminary X-ray diffraction analysis of the adhesin-carbohydrate complexes

Flo1p and Lg-Flo1p are two cell-wall adhesins belonging to the Flo (flocculation) protein family from the yeasts Saccharomyces cerevisiae and S. pastorianus. The main function of these modular proteins endowed with calcium-dependent lectin activity is to mediate cell-cell adhesion events during yeast flocculation, a process which is well known at the cellular level but still not fully characterized from a molecular perspective. Recently, structural features of the N-terminal Flo lectin domains, including the N-terminal domain of Lg-Flo1p (N-Lg-Flo1p), and their interactions with carbohydrate molecules have been investigated. However, structural data concerning the N-terminal domain of Flo1p (N-Flo1p), which is the most specific among the Flo proteins, are missing and information about the N-Lg-Flo1p-carbohydrate interaction still lacks detailed structural insight. Here, the crystallization and preliminary X-ray characterization of the apo form and the mannose complex of N-Flo1p and X-ray analysis of N-Lg-Flo1p crystals soaked in α-1,2-mannobiose are reported. The N-Flo1p crystals diffracted to a resolution of 1.43 Å in the case of the apo form and to 2.12 Å resolution for the mannose complex. Both crystals were orthorhombic and belonged to space group P212121, with one molecule in the asymmetric unit. The N-Lg-Flo1p-α-1,2-mannobiose complex crystal diffracted to 1.73 Å resolution and belonged to the monoclinic space group P1211 with two molecules in the asymmetric unit.

Aft2, a novel transcription regulator, is required for iron metabolism, oxidative stress, surface adhesion and hyphal development in Candida albicans

Morphological transition and iron metabolism are closely relevant to Candida albicans pathogenicity and virulence. In our previous study, we demonstrated that C. albicans Aft2 plays an important role in ferric reductase activity and virulence. Here, we further explored the roles of C. albicans Aft2 in numerous cellular processes. We found that C. albicans Aft2 exhibited an important role in iron metabolism through bi-directional regulation effects on iron-regulon expression. Deletion of AFT2 reduced cellular iron accumulation under iron-deficient conditions. Furthermore, both reactive oxygen species (ROS) generation and superoxide dismutase (SOD) activity were remarkably increased in the aft2Δ/Δ mutant, which were thought to be responsible for the defective responses to oxidative stress. However, we found that over-expression of C. albicans AFT2 under the regulation of the strong PGK1 promoter could not effectively rescue Saccharomyces cerevisiae aft1Δ mutant defects in some cellular processes, such as cell-wall assembly, ion homeostasis and alkaline resistance, suggesting a possibility that C. albicans Aft2 weakened its functional role of regulating some cellular metabolism during the evolutionary process. Interestingly, deletion of AFT2 in C. albicans increased cell surface hydrophobicity, cell flocculation and the ability of adhesion to polystyrene surfaces. In addition, our results also revealed that C. albicans Aft2 played a dual role in regulating hypha-specific genes under solid and liquid hyphal inducing conditions. Deletion of AFT2 caused an impaired invasive growth in solid medium, but an increased filamentous aggregation and growth in liquid conditions. Moreover, iron deficiency and environmental cues induced nuclear import of Aft2, providing additional evidence for the roles of Aft2 in transcriptional regulation.

Cell aggregations in yeasts and their applications

Yeasts can display four types of cellular aggregation: sexual, flocculation, biofilm formation, and filamentous growth. These cell aggregations arise, in some yeast strains, as a response to environmental or physiological changes. Sexual aggregation is part of the yeast mating process, representing the first step of meiotic recombination. The flocculation phenomenon is a calcium-dependent asexual reversible cellular aggregation that allows the yeast to withstand adverse conditions. Biofilm formation consists of multicellular aggregates that adhere to solid surfaces and are embedded in a protein matrix; this gives the yeast strain either the ability to colonize new environments or to survive harsh environmental conditions. Finally, the filamentous growth is the ability of some yeast strains to grow in filament forms. Filamentous growth can be attained by two different means, with the formation of either hyphae or pseudohyphae. Both hyphae and pseudohyphae arise when the yeast strain is under nutrient starvation conditions and they represent a means for the microbial strain to spread over a wide area to survey for food sources, without increasing its biomass. Additionally, this filamentous growth is also responsible for the invasive growth of some yeast.