Screening of seaweeds for sustainable biofuel recovery through sequential biodiesel and bioethanol production

Maximizing lipid accumulation in Tetradesmus obliquus under heavy metal stress for sustainable biodiesel innovation

This study investigates the potential of Tetradesmus obliquus for lipid accumulation under heavy metal stress and evaluates it's aviability for biodiesel production. We surveyed how different concentrations of heavy metals, including manganese (Mn), cobalt (Co), and zinc (Zn), influence the carbohydrate & protein, lipid yield, and fatty acid profiles of T. obliquus cultures. Our results demonstrated that while lipid content increased under heavy metal stress, the extent of accumulation was highly dependent on metal type and concentration. Notably, the algal culture treated with 0.04 mM Co²⁺ showed the highest lipid accumulation. Treatment with 0.3 mM Zn²⁺ resulted in the highest proportion of saturated fatty acids (SFA). The Relative Enrichment Efficiency Coefficient (REEC) analysis demonstrated that 0.04 mM and 0.07 mM Co²⁺ led to the highest lipid and carbohydrate content stimulation. Additionally, GC-MS analysis revealed increased monounsaturated fatty acids (MUFA) under several metal stress conditions. The study demonstrated that exposure to specific concentrations of heavy metals can significantly enhance lipid accumulation and alter the fatty acid profiles of T. obliquus, which are crucial for improving biodiesel quality. The implications of these findings suggest that heavy metal-induced stress could be a feasible approach to enhancing lipid accumulation for sustainable biodiesel production, and T.obliquus is a promising candidate for future biodiesel production.

Effects of dietary supplementation with benthic diatom Amphora coffeaeformis on blood biochemistry, steroid hormone levels and seed production efficiency of Nile tilapia Oreochromis niloticus broodstock

Aquafeed additive quality and quantity remain pivotal factors that constrain the sustainability and progress of aquaculture feed development. This study investigates the impact of incorporating the benthic diatom Amphora coffeaeformis into the diet of Nile tilapia (Oreochromis niloticus) broodstock, on the blood biochemistry, steroid hormone (SH) levels and seed production efficiency. Broodstock females displaying mature ovary indications were initially combined with males at a ratio of three females to one male. A total of 384 adult Nile tilapia (288 females and 96 males) were used, with 32 fish (24 females and eight males) assigned to each of 12 concrete tanks (8 m³; 2 m × 4 m × 1 m), with three replicate tanks for each dietary treatment, throughout a 14-day spawning cycle until egg harvest. Fish were fed one of four different dietary treatments: AM0% (control diet), and AM2%, AM4% and AM6% enriched with the diatom A. coffeaeformis at levels of 20, 40 and 60 g/kg of diet respectively. At the trial's conclusion, total protein, albumin, triglyceride and creatinine), SHs (follicle-stimulating hormone, luteinizing hormone, free testosterone, total testosterone, progesterone and prolactin) and seeds production efficiency of Nile tilapia improved significantly (p < 0.05) in alignment with the increment of A. coffeaeformis supplementation. The findings propose that including A. coffeaeformis at levels ranging from 4% to 6% could be effectively employed as a feed additive during the Nile tilapia broodstock's spawning season.

Invasive Seaweed Rugulopteryx okamurae: A Potential Source of Bioactive Compounds with Antioxidant Activity

Rugulopteryx okamurae (RO) is a species of brown seaweed that has invaded several shorelines worldwide, including the Spanish Mediterranean and the Strait of Gibraltar coasts, causing serious environmental and economic problems. This work aimed to characterize the bioactive composition of RO. A high content of carbohydrates (58.7 ± 2.6 wt%), fats (17.1 ± 0.4 wt%), and ashes (14.3 ± 0.2 wt%) were found, together with lower protein content (5.5 ± 1.8 wt%). Holocellulose was the most abundant polysaccharide fraction (49.2 ± 1.3 wt%), showing 43.4 ± 2.0 wt% of cellulose and 5.8 ± 0.7 wt% of hemicellulose, followed by lignin (18.9 ± 2.5 wt%). The monosaccharides composition showed a high level of glucose (13.2 ± 1 wt%) and glucuronic acid (9.3 ± 0.5 wt%). RO contained high levels of essential nutrients (Ca, K, Na, S, Mg), trace minerals (Mn, Mo, Se, and Cu), and some toxic heavy metals (Ni, Cd, As). The main fatty acid present in RO was palmitic acid (C16:0, 30.8 ± 3.0 mg/100 g), followed by myristic acid (C14:0, 19.3 ± 2.4 mg/100 g) and eicosatetraenoic acid (C20:4, 19.2 ± 1.3 mg/100 g). The extract obtained by microwave-assisted extraction (MAE) presented significant contents of polyphenols (2.7 ± 0.2 mg GAE/g) and antioxidant activity (3.0 ± 0.4 mg TE/g DPPH, 4.5 ± 0.3 mg TE/g ABTS, 4.7 ± 0.3 mg TE/g FRAP). Six main polyphenols were identified by HPLC-MS/MS, showing higher contents of gallic acid (20.7 ± 1.5 mg/g) and chlorogenic acid (9.7 ± 0.5 mg/g). These results highlight the possibilities offered in the valorization of RO to obtain bioactive compounds with antioxidant performance in several applications.

Harmony in detoxification: Microalgae unleashing the potential of lignocellulosic pretreatment wastewater for resource utilization

Lignocellulosic biomass is a pivotal renewable resource in biorefinery process, requiring pretreatment, primarily chemical pretreatment, for effective depolymerization and subsequent transformation. This process yields solid residue for saccharification and lignocellulosic pretreatment wastewater (LPW), which comprises sugars and inhibitors such as phenols and furans. This study explored the microalgal capacity to treat LPW, focusing on two key hydrolysate inhibitors: furfural and vanillin, which impact the growth of six green microalgae. Chlorella sorokiniana exhibited higher tolerance to furfural and vanillin. However, both inhibitors hindered the growth of C. sorokiniana and disrupted algal photosynthetic system, with vanillin displaying superior inhibition. A synergistic inhibitory effect (Q < 0.85) was observed with furfural and vanillin on algal growth. Furfural transformation to low-toxic furfuryl alcohol was rapid, yet the addition of vanillin hindered this process. Vanillin stimulated carbohydrate accumulation, with 50.48 % observed in the 0.1 g/L furfural + 0.1 g/L vanillin group. Additionally, vanillin enhanced the accumulation of C16: 0 and C18: 2, reaching 21.71 % and 40.36 %, respectively, with 0.1 g/L vanillin. This study proposed a microalgae-based detoxification and resource utilization approach for LPW, enhancing the comprehensive utilization of lignocellulosic components. The observed biomass modifications also suggested potential applications for biofuel production, contributing to the evolving landscape of sustainable biorefinery processes.

Enhancing the biodiesel production in the green alga Chlorella vulgaris by heavy metal stress and prediction of fuel properties from fatty acid profiles

The green microalga Chlorella vulgaris was used as a test organism during this study for evaluation of the impact of different heavy metal stress, Mn2+, Co2+, and Zn2+, on enhancing the biodiesel production. The algal cultures were grown for 13 days under heavy metal stress after which were subjected to estimation of growth, some primary metabolites, lipid, and fatty acid profiles. The maximum lipid accumulation (283.30 mg/g CDW) was recorded in the algal culture treated with 3 µM cobalt nitrate. Application of 2 mM manganese chloride; 1, 2, and 3 μM cobalt nitrate; and 0.2, 0.4, and 0.6 mM zinc sulfate caused highly significant increases in the lipid contents amounting to 183.8, 191.4, 230.6, 283.3, 176.3, 226.0, and 212.1 mg/g CDW, respectively, in comparison to control (153.4 mg/g CDW). The maximum proportion of saturated fatty acids (SFA) (64.44%) was noted in the culture treated with 6 mM MnCl2 due to the existence of palmitic acid (C16:0), stearic acid (C18:0), and pentadecylic acid (C15:0) which are represented by 53.59%, 5.96%, and 1.37%, respectively, of the total FAs. Relative increase in energy compound (REEC) showed that 1, 2, and 3 µM Co2+ lead to the highest stimulation in lipid and carbohydrate contents to 0.207, 0.352, and 0.329 × 103%, respectively. Empirical formulas were used for the assessment of biodiesel fuel properties based on FAME composition. The estimated properties met the prescribed international standard criteria.

Macroalgae Bioplastics: A Sustainable Shift to Mitigate the Ecological Impact of Petroleum-Based Plastics

The surge in global utilization of petroleum-based plastics, which notably heightened during the COVID-19 pandemic, has substantially increased its harm to ecosystems. Considering the escalating environmental impact, a pivotal shift towards bioplastics usage is imperative. Exploring and implementing bioplastics as a viable alternative could mitigate the ecological burden posed by traditional plastics. Macroalgae is a potential feedstock for the production of bioplastics due to its abundance, fast growth, and high cellulose and sugar content. Researchers have recently explored various methods for extracting and converting macroalgae into bioplastic. Some of the key challenges in the production of macroalgae bioplastics are the high costs of large-scale production and the need to optimize the extraction and conversion processes to obtain high-quality bioplastics. However, the potential benefits of using macroalgae for bioplastic production include reducing plastic waste and greenhouse gas emissions, using healthier materials in various life practices, and developing a promising area for future research and development. Also, bioplastic provides job opportunities in free enterprise and contributes to various applications such as packaging, medical devices, electronics, textiles, and cosmetics. The presented review aims to discuss the problem of petroleum-based plastic, bioplastic extraction from macroalgae, bioplastic properties, biodegradability, its various applications, and its production challenges.

Tropical Seaweeds as a Sustainable Resource Towards Circular Bioeconomy: Insights and Way Forward

Seaweeds are photosynthetic marine macroalgae known for their rapid biomass growth and their significant contributions to global food and feed production. Seaweeds play a crucial role in mitigating various environmental issues, including greenhouse gases, ocean acidification, hypoxia, and eutrophication. Tropical seaweeds are typically found in tropical and subtropical coastal zones with warmer water temperatures and abundant sunlight. These tropical seaweeds are rich sources of proteins, vitamins, minerals, fibers, polysaccharides, and bioactive compounds, contributing to their health-promoting properties and their diverse applications across a range of industries. The productivity, cultivability, nutritional quality, and edibility of tropical seaweeds have been well-documented. This review article begins with an introduction to the growth conditions of selected tropical seaweeds. Subsequently, the multifunctional properties of tropical seaweeds including antioxidant and anti-inflammatory, anti-coagulant, anti-carcinogenic and anti-proliferative, anti-viral, therapeutic and preventive properties were comprehensively evaluated. The potential application of tropical seaweeds as functional foods and feeds, as well as their contributions to sustainable cosmetics, bioenergy, and biofertilizer production were also highlighted. This review serves as a valuable resource for researchers involved in seaweed farming as it provides current knowledge and insights into the cultivation and utilization of seaweeds.

Unlocking the potential of microalgae cultivated on wastewater combined with salinity stress to improve biodiesel production

Microalgae have the potential as a source of biofuels due to their high biomass productivity and ability to grow in a wide range of conditions, including wastewater. This study investigated cultivating two microalgae species, Oocystis pusilla and Chlorococcus infusionum, in wastewater for biodiesel production. Compared to Kühl medium, KC medium resulted in a significant fold increase in cellular dry weight production for both O. pusilla and C. infusionum, with an increase of 1.66 and 1.39, respectively. A concentration of 100% wastewater resulted in the highest growth for O. pusilla, with an increase in biomass and lipid content compared to the KC medium. C. infusionum could not survive in these conditions. For further increase in biomass and lipid yield of O. pusilla, different total dissolved solids (TDS) levels were used. Maximum biomass and lipid productivities were achieved at 3000 ppm TDS, resulting in a 28% increase in biomass (2.50 g/L) and a 158% increase in lipid yield (536.88 mg/g) compared to KC medium. The fatty acid profile of O. pusilla cultivated on aerated wastewater at 3000 ppm TDS showed a high proportion of desirable saturated fatty acids (SFA) and monounsaturated fatty acids (MUFA) for biodiesel production. Cultivating microalgae in wastewater for biodiesel production can be cost-effective, especially for microalgae adapted to harsh conditions. It could be concluded that O. pusilla is a promising candidate for biodiesel production using wastewater as a growth medium, as it has high biomass productivity and lipid yield, and its fatty acid profile meets the standard values of American and European biodiesel standards. This approach offers a sustainable and environmentally friendly solution for producing biofuels while reducing the environmental impact of wastewater disposal.

Exploring the Prospects of Fermenting/Co-Fermenting Marine Biomass for Enhanced Bioethanol Production

With the rising demands for renewable fuels, there is growing interest in utilizing abundant and sustainable non-edible biomass as a feedstock for bioethanol production. Macroalgal biomass contains a high content of carbohydrates in the form of special polysaccharides like alginate, agar, and carrageenan that can be converted to fermentable sugars. In addition, using seagrass as a feedstock for bioethanol production can provide a sustainable and renewable energy source while addressing environmental concerns. It is a resource-rich plant that offers several advantages for bioethanol production, including its high cellulose content, rapid growth rates, and abundance in coastal regions. To reduce sugar content and support efficient microbial fermentation, co-fermentation of macroalgae with seagrass (marine biomass) can provide complementary sugars and nutrients to improve process yields and economics. This review comprehensively covers the current status and future potential of fermenting macroalgal biomass and seagrass, as well as possible combinations for maximizing bioethanol production from non-edible energy crops. An overview is provided on the biochemical composition of macroalgae and seagrass, pretreatment methods, hydrolysis, and fermentation processes. Key technical challenges and strategies to achieve balanced co-substrate fermentation are discussed. The feasibility of consolidated bioprocessing to directly convert mixed feedstocks to ethanol is also evaluated. Based on current research, macroalgae-seagrass co-fermentation shows good potential to improve the bioethanol yields, lower the cost, and enable more optimal utilization of diverse marine biomass resources compared to individual substrates.

Unveiling the Potential of Algal Extracts as Promising Antibacterial and Antibiofilm Agents against Multidrug-Resistant Pseudomonas aeruginosa: In Vitro and In Silico Studies including Molecular Docking

Multidrug-resistant Pseudomonas aeruginosa poses a global challenge due to its virulence and biofilm-forming ability, leading to persistent infections. This study had a dual focus: first, it aimed to investigate the biofilm activity and antibiotic resistance profiles of Pseudomonas aeruginosa isolates obtained from a fish-rearing farm. Second, it explored the potential of algal extracts as effective antibacterial and antibiofilm agents. The study analyzed 23 isolates of P. aeruginosa from the farm, assessing antibiotic resistance and biofilm formation. The antimicrobial and antibiofilm activities of two algal extracts, Arthrospira platensis (cyanobacteria) acetone extract (AAE) and Polysiphonia scopulorum (Rhodophyta) methanol extract (PME), were tested individually and combined (COE). The effects on biofilm-related gene expression were examined. AAE, PME, and COE were evaluated for antimicrobial and antibiofilm properties. Biofilm-related gene expression was measured and the extracts were analyzed for physicochemical properties and toxicity. Most P. aeruginosa isolates (86.9%) were antibiotic-resistant and formed biofilms. AAE, PME, and COE displayed promising antibacterial and antibiofilm effects, with COE being particularly effective. COE reduced a key biofilm-related gene expression. The fatty acid content (56% in AAE and 34% in PME) correlated with the effects. Specific compounds, such as phytol, bromophenol, and dihydroxy benzaldehyde, contributed to the activities. The extracts showed favorable characteristics and interactions with FabZ protein amino acids. This study suggests the potential of algal extracts as antibacterial and antibiofilm agents against drug-resistant infections. Further exploration in clinical applications is warranted.

A biotechnological roadmap for decarbonization systems combined into bioenergy production: Prelude of environmental life-cycle assessment

Decarbonization has become a critical issue in recent years due to rising energy demands and diminishing oil resources. Decarbonization systems based on biotechnology have proven to be a cost-effective and environmentally benign technique of lowering carbon emissions. Bioenergy generation is an environmentally friendly technique for mitigating climate change in the energy industry, and it is predicted to play an important role in lowering global carbon emissions. This review essentially provides a new perspective on the unique biotechnological approaches and strategies based decarbonization pathways. Furthermore, the application of genetically engineered microbes in CO₂ biomitigation and energy generation is particularly emphasized. The production of biohydrogen and biomethane via anaerobic digestion techniques has been highlighted in the perspective. In this review, role of microorganisms in bioconversion of CO₂ into different types of bioproducts such as biochemical, biopolymers, biosolvents and biosurfactant was summarized. The current analysis, which includes an in-depth discussion of a biotechnology-based roadmap for the bioeconomy, provides a clear picture of sustainability, forthcoming challenges, and perspectives.

Morpho-anatomical, and chemical characterization of some calcareous Mediterranean red algae species

Climatic changes are anticipated to have a detrimental effect on calcifying marine species. Calcareous red algae may be especially vulnerable to seasonal variations since they are common and essential biologically, but there is little research on the morpho-anatomical, and chemical characterization of such species. This study conducted the seasonal investigation of the three dominant Mediterranean calcified red algae. Morphological and 18S rRNA analysis confirmed the identification of collected species as Corallina officinalis, Jania rubens, and Amphiroa rigida. In general, C. officinalis was represented in the four seasons and flourishing maximum in autumn (70% of total species individuals). While J. rubens species was represented in winter, autumn, and spring and completely absent in summer. A. rigida was abundant only in the summer season by 40%. A full morphological and anatomical description of these species were examined, and their chemical compositions (carbohydrate, protein, lipid, pigments, and elements content) were assessed in different seasons, where carbohydrates were the dominant accumulates followed by proteins and lipids. Pearson correlation analysis confirmed a positive correlation between salinity level and nitrogenous nutrients of the seawater with the pigment contents (phycobiliproteins, carotenoids, and chlorophyll a) of the studied seaweeds. The results proved that calcified red algae were able to deposit a mixture of calcium carbonates such as calcite, vaterite, calcium oxalate, calcite-III I calcium carbonate, and aragonite in variable forms depending on the species.

Seasonal Changes in the Biochemical Composition of Dominant Macroalgal Species along the Egyptian Red Sea Shore

Macroalgae are significant biological resources in coastal marine ecosystems. Seasonality influences macroalgae biochemical characteristics, which consequentially affect their ecological and economic values. Here, macroalgae were surveyed from summer 2017 to spring 2018 at three sites at 7 km (south) from El Qusier, 52 km (north) from Marsa Alam and 70 km (south) from Safaga along the Red Sea coast, Egypt. Across all the macroalgae collected, Caulerpa prolifera (green macroalgae), Acanthophora spicifera (red macroalgae) and Cystoseira myrica, Cystoseira trinodis and Turbinaria ornata (brown macroalgae) were the most dominant macroalgal species. These macroalgae were identified at morphological and molecular (18s rRNA) levels. Then, the seasonal variations in macroalgal minerals and biochemical composition were quantified to determine the apt period for harvesting based on the nutritional requirements for commercial utilizations. The chemical composition of macroalgae proved the species and seasonal variation. For instance, minerals were more accumulated in macroalgae C. prolifera, A. spicifera and T. ornata in the winter season, but they were accumulated in both C. myrica and C. trinodis in the summer season. Total sugars, amino acids, fatty acids and phenolic contents were higher in the summer season. Accordingly, macroalgae collected during the summer can be used as food and animal feed. Overall, we suggest the harvesting of macroalgae for different nutrients and metabolites in the respective seasons.

A review on current advances in the energy and cost effective pretreatments of algal biomass: Enhancement in liquefaction and biofuel recovery

The main downside of utilizing algal biomass for biofuel production is the rigid cell wall which confines the availability of soluble organics to hydrolytic microbes during biofuel conversion. This constraint reduces the biofuel production efficiency of algal biomass. On the other hand, presenting various pretreatment methods before biofuel production affords cell wall disintegration and enhancement in biofuel generation. The potential of pretreatment methods chiefly relies on the extent of biomass liquefaction, energy, and cost demand. In this review, different pretreatments employed to disintegrate algal biomass were conferred in depth with detailed information on their efficiency in enhancing liquefaction and biofuel yield for pilot-scale implementation. Based on this review, it has been concluded that combinative and phase-separated pretreatments provide virtual input in enhancing the biofuel generation based on liquefaction potential, energy, and cost. Future studies should focus on decrement in cost and energy requirement of pretreatment in depth.

Impact of Dietary Administration of Seaweed Polysaccharide on Growth, Microbial Abundance, and Growth and Immune-Related Genes Expression of The Pacific Whiteleg Shrimp (Litopenaeus vannamei)

This work aims to determine the impact of dietary supplementation of polysaccharide, extracted from brown seaweeds Sargassum dentifolium on growth indices, feed utilization, biochemical compositions, microbial abundance, expressions of growth and immunity-related genes, and stress genes of the Pacific Whiteleg shrimp Litopenaeus vannamei. A total of 360 post-larvae of L. vannamei were randomly distributed into a 12-glass aquarium (40 L of each) at a stocking density of 30 shrimp with an initial weight of (0.0017 ± 0.001 g). During the 90-day experiment trial, all shrimp larvae were fed their respective diets at 10% of total body weight, three times a day. Three experimental diets were prepared with different seaweed polysaccharide (SWP) levels. The basal control diet had no polysaccharide level (SWP₀), while SWP₁, SWP₂, and SWP₃ contained polysaccharides at concentrations of 1, 2, and 3 g kg^-1 diet, respectively. Diets supplemented with polysaccharide levels showed significant improvements in weight gain and survival rate, compared to the control diet. Whole-body biochemical composition and the microbial abundance (the total count of heterotrophic bacteria and Vibrio spp.) of L. vannamei showed significant differences among polysaccharide-treated diets compared to the control. At the end of the feeding experiment, the dietary supplementation of polysaccharide levels enhanced the expression of growth-related genes (Insulin-like growth factors (IGF-I, IGF-II), immune-related genes (β -Glucan-binding protein (β-Bgp), Prophenoloxidase (ProPO), Lysozyme (Lys), and Crustin), and stress genes (Superoxide dismutase (SOD) and Glutathione peroxidase (GPx) in the muscle tissue of L. vannamei. However, the current study concluded that the inclusion rate of 2 g kg^-1 of polysaccharide as a dietary additive administration enhanced both weight gain and survival rate of L. vannamei, while the incorporation level of 3 g kg^-1 reduces the abundance of pathogenic microbes and enhances the growth-, immunity- and stress-related gene expressions of L. vannamei.

Commercial Seaweed Liquid Extract as Strawberry Biostimulants and Bioethanol Production

Seaweeds are increasingly intriguing as a sustainable source of bioactive compounds. They have applications in agriculture, fuels, feed, and food products. To become a cost-competitive product with zero waste, a biorefinery approach is applied, where several products are valorized at the same time. True-Algae-Max (TAM®) has been investigated for its ability to improve the yield and nutritional facts of a strawberry plant. Three concentrations of TAM (0, 50, and 100%) were examined by foliar spray in 2017 with 50% NPK chemical fertilizer. Results indicated that growth, yield, chlorophyll, and potassium content were significantly improved by TAM treatments. TAM50 % resulted in maximum root length, leaf area, plant fresh weight, fruit weight, and yield with an increase ranging from 10 to 110% compared to control. Compared to the NPK control, strawberries grown with TAM50% improved total soluble solids (TSS) from 7.58 to 10.12% and anthocyanin from 23.08 to 29.42 mg CGE 100 g-1. Noteworthily, this reduced total sugar, and total phenolics were boosted by TAM applications, while non-reducing sugar was reduced compared to control. On the other hand, whole seaweed biomass and TAM residuals were used for bioethanol production by acid scarification. The maximum bioethanol yield was observed in residual biomass (0.34 g g-1 dw), while the whole seaweed biomass showed only 0.20 g g-1 dw. These results proved the biorefinery concept of using seaweed extract as a biostimulator and bioethanol production.

Enhancing biomass and lipid productivity of a green microalga Parachlorella kessleri for biodiesel production using rapid mutation of atmospheric and room temperature plasma

BACKGROUND

Microalgae, with their high adaptability to various stress conditions and rapid growth, are considered excellent biomass resources for lipid production and biodiesel feedstocks. However, lipid yield and productivity of the natural strains are common bottlenecks in their large-scale use for lipid production, which can be overcome by evolving new strains using conventional and advanced mutagenic techniques. It is challenging to generate microalgae strains capable of high lipid synthesis through natural selection. As a result, random mutagenesis is currently considered a viable option in many scenarios. The objective of this study was to explore atmospheric and room temperature plasma (ARTP) as a random mutagenesis technique to obtain high lipid-accumulating mutants of a green microalga for improved biodiesel production.

RESULTS

A green microalgal species was isolated from the Chinese Yellow Sea and identified as Parachlorella kessleri (OM758328). The isolated microalga was subsequently mutated by ARTP to obtain high lipid-accumulating mutants. Based on the growth rate and lipid content, 5 mutants (named M1, M2, M4, M5, and M8) were selected from 15 pre-selected mutants. These five mutants varied in their growth rate from 0.33 to 0.68 day-1, with the lipid content varying between 0.25 g/L in M2 to 0.30 g/L in M8 at 10th day of cultivation. Among the mutants, M8 showed the maximum biomass productivity (0.046 g/L/day) and lipid productivity (20.19 mg/L/day), which were 75% and 44% higher than the wild strain, respectively. The triglyceride (TAG) content of M8 was found to be 0.56 g/L at 16th day of cultivation, which was 1.77-fold higher than that of the wild strain. Furthermore, M8 had the highest saturated fatty acids (C16-18) with the lowermost polyunsaturated fatty acid content, which are favorable properties of a biodiesel feedstock according to international standards.

CONCLUSION

The mutant strain of P. kessleri developed by the ARTP technique exhibited significant improvements in biomass productivity, lipid content, and biodiesel quality. Therefore, the biomass of this mutant microalga could be a potential feedstock for biodiesel production.

Recent developments in biorefining of macroalgae metabolites and their industrial applications - A circular economy approach

The macroalgal industry is expanding, and the quest for novel ingredients to improve and develop innovative products is crucial. Consumers are increasingly looking for natural-derived ingredients in cosmetic products that have been proven to be effective and safe. Macroalgae-derived compounds have growing popularity in skincare products as they are natural, abundant, biocompatible, and renewable. Due to their high biomass yields, rapid growth rates, and cultivation process, they are gaining widespread recognition as potentially sustainable resources better suited for biorefinery processes. This review demonstrates macroalgae metabolites and their industrial applications in moisturizers, anti-aging, skin whitening, hair, and oral care products. These chemicals can be obtained in combination with energy products to increase the value of macroalgae from an industrial perspective with a zero-waste approach by linking multiple refineries. The key challenges, bottlenecks, and future perspectives in the operation and outlook of macroalgal biorefineries were also discussed.

Do Red Seaweed Nanoparticles Enhance Bioremediation Capacity of Toxic Dyes from Aqueous Solution?

Based on their functional groups, the use of various seaweed forms in phytoremediation has recently gained significant eco-friendly importance. The objective of this study was to determine whether a novel, sustainable, and ecologically acceptable adsorbent could be employed to remove toxic textile dye (Ismate Violet 2R (IV2R)) from an aqueous solution. The low-cost adsorbent was prepared from the nanoparticles form of the native red seaweed species, Pterocladia capillacea. Before and after the adsorption procedure, comprehensive characterization experiments on the bio-adsorbent were carried out, including BET, SEM, FTIR, UV, and dynamic light scattering (DLS) examination. The adsorption performance of the prepared nano-Pterocladia capillacea was optimized by adjusting operating parameters such as the initial dye concentration of 60 mg L⁻¹, pH of 2, and contact time of 15 min, all of which were obtained by batch experiments in the lab. At the optimum conditions, the prepared adsorbent had maximum removal effectiveness of 87.2%. Most typical kinetics and isotherm models were used to test the experimental results. The equilibrium data fit well with the Langmuir isotherm model, with comparatively higher R² values and fewer standard errors, while the pseudo-second-order kinetic model fits better with a decent correlation coefficient. Thermodynamic parameters revealed that the sorption process on nano-alga was exothermic and spontaneous.

Implementation of graphitic carbon nitride nanomaterials and laser irradiation for increasing bioethanol production from potato processing wastes

Agricultural and agro-industrial wastes (e.g., potato peel waste) are causing severe environmental problems. The processes of pretreatment, saccharification, and fermentation are the major obstacles in bioethanol production from wastes and must be overcome by efficient novel techniques. The effect of exposing the fungi (yeast) Saccharomyces cerevisiae to laser source with the addition of graphitic carbon nitride nanosheets (g-C₃N₄) with different concentrations on bioethanol production was investigated through the implementation of a batch anaerobic system and using potato peel waste (PPW). Dichromate test was implemented as quantitative analysis for quantification of the bioethanol yield. The benefits of this test were the appearance of green color indicating the identification of ethanol (C₂H₅OH) by bare eye and the ease to calculate the bioethanol yield through UV-visible spectrophotometry. The control sample (0.0 ppm of g-C₃N₄) showed only a 4% yield of bioethanol; however, by adding 150 ppm to PPW medium, 22.61% of ethanol was produced. Besides, laser irradiations (blue and red) as influencing parameters were studied with and without the addition of g-C₃N₄ nanomaterials aiming to increase the bioethanol. It was determined that the laser irradiation can trigger the bioethanol production (in case of red: 13.13% and in case of blue: 16.14% yields, respectively) compared to the control sample (in absence of g-C₃N₄). However, by adding different concentrations of g-C₃N₄ nanomaterials from 5 to 150 ppm, the bioethanol yield was increased as follows: in case of red: 56.11% and, in case of blue: 56.77%, respectively. It was found that using fungi and exposing it to the blue laser diode source having a wavelength of 450 nm and a power of 250 mW for a duration of 30 min with the addition of 150 mg L^-1 of g-C₃N₄ nanomaterials delivered the highest bioethanol yield from PPW.

Influence of catalysts on bio-oil yield and quality: a review

The catalytic production of bio-oil can potentially solve the impending fossil fuel depletion crisis. Two practical problems related to bio-oil are the yield and quality, which are determined by the catalyst. Until recently, little work has focused on the relationship between biomass, catalyst, yield, and quality. To cover this deficiency, this work reviews the influence of metal oxides and zeolites on the yields and qualities of bio-oil derived from woody, herbaceous, agricultural, and algae biomasses. Generally, both catalysts decreased the yield and increased the quality at the same time, and more acidic catalysts decreased the yield further. Thus, zeolites usually decreased the yield more than metal oxides. Although the quality was increased, the oxygen content and calorific value were both increased, which favored further applications. Wood biomass had a lower ash content and nitrogen content than herbaceous, agricultural, and algae biomasses, simultaneously resulting in better yield and quality. This review helps understand the current status of bio-oil investigations and can help find new research directions in the future.

Bioethanol production from defatted biomass of Nannochloropsis oculata microalgae grown under mixotrophic conditions

In order to improve the economic feasibility and environmental sustainability of microalgal bioethanol production, a nontoxic, copious agricultural waste, sugarcane bagasse aqueous extract (SBAE) was used for cultivating Nannochloropsis oculata microalga (NNO-1 UTEX Culture LB 2164) as potential sources of substitutes for traditional nutrition to reduce the costs in cultivation through acid digestion and enzymatic treatment before being fermented by Saccharomyces cerevisiae (NRRLY-2034). The primary target of this research was to find out the ethanol from hydrolysate of the defatted biomass of N. oculata grown mixotrophically on SBAE and CO₂ as carbon sources. For acid hydrolysis (AH), the highest carbohydrate yield 252.84 mg/g DW has been obtained with 5.0% (v/v) H₂SO₄ at 121 °C for 15 min for defatted biomass cultivated mixotrophically on sugarcane bagasse aqueous extract (SBAE) regarding 207.41 mg/g DW for defatted biomass cultivated autotrophically (control treatment). Whereas, the highest levels of reducing sugars has been obtained with 4.0% (v/v) H₂SO₄ 157.47±1.60 mg/g DW for defatted biomass cultivated mixotrophically compared with 135.30 mg/g DW for the defatted control treatment. The combination of acid hydrolysis 2.0% (v/v) H₂SO₄ followed by enzymatic treatment (AEH) increased the carbohydrate yields to 268.53 mg/g DW for defatted biomass cultivated mixotrophically on SBAE regarding 177.73 mg/g DW for the defatted control treatment. However, the highest levels of reducing sugars have been obtained with 3.0% (v/v) H₂SO₄ followed by enzyme treatment that gave 232.39±1.77 for defatted biomass cultivated mixotrophically on SBAE and 150.75 mg/g DW for the defatted control treatment. The sugar composition of the polysaccharides showed that glucose was the principal polysaccharide sugar (60.7-62.49%) of N. oculata defatted biomass. Fermentation of the hydrolysates by Saccharomyces cerevisiae for the acid pretreated defatted biomass samples gave ethanol yield of 0.86 g/L (0.062 g/g sugar consumed) for control and 1.17 g/L (0.069 g/g sugar consumed) for SBAE mixotrophic. Whereas, the maximum ethanol yield of 6.17±0.47 g/L (0.26±0.11 g/g sugar consumed) has been obtained with samples from defatted biomass grown mixotrophically (SBAE mixotrophic) pretreated with acid coupled enzyme hydrolysis.

Biofuel production from Macroalgae: present scenario and future scope

The current fossil fuel reserves are not sufficient to meet the increasing demand and very soon will become exhausted. Pollution, global warming, and inflated oil prices have led the quest for renewable energy sources. Macroalgae (green, brown, and red marine seaweed) is gaining popularity as a viable and promising renewable source for biofuels production. Numerous researches have been conducted to access the potential of macroalgae for generating diverse bioproducts such as biofuels. The existence of components such as carbohydrates and lipids, and the lack or deficiency of lignin, create macroalgae an enviable feedstock for biofuels generation. This review briefly covers the potential macroalgal species promoting the production of biofuels and their cultivation methods. It also illustrates the biofuel generation pathway and its efficiency along with the recent techniques to accelerate the product yield. In addition, the current analysis focuses on a cost-effective sustainable generation of biofuel along with commercialization and scaleup.

Introducing a Marine Biorefinery System for the Integrated Production of Biofuels, High-Value-Chemicals, and Co-Products: A Path Forward to a Sustainable Future

Biofuels have many environmental and practical benefits as a transportation fuel. They are among the best alternatives to fossil fuels- thanks to their capacity for negative carbon emissions, which is vital for archiving the global ambition of a net-zero economy. However, conventional biofuel production takes place on inland sites and relies on freshwater and edible crops (or land suitable for edible crop production), which has led to the food versus fuel debate. It also suffers technical and economical barriers owing to the energy balance and the cost of production compared with fossil fuels. Establishing a coastal integrated marine biorefinery (CIMB) system for the simultaneous production of biofuels, high-value chemicals, and other co-products could be the ultimate solution. The proposed system is based on coastal sites and relies entirely on marine resources including seawater, marine biomass (seaweed), and marine microorganisms (marine yeasts and marine microalgae). The system does not require the use of arable land and freshwater in any part of the production chain and should be linked to offshore renewable energy sources to increase its economic feasibility and environmental value. This article aims to introduce the CIMB system as a potential vehicle for addressing the global warming issue and speeding the global effort on climate change mitigation as well as supporting the world’s water, food and energy security. I hope these perspectives serve to draw attention into research funding for this approach.

Chondracanthus teedei var. lusitanicus: The Nutraceutical Potential of an Unexploited Marine Resource

Presently, there is a high demand for nutritionally enhanced foods, so it is a current challenge to look at new raw food sources that can supplement beneficially the human diet. The nutritional profile and key secondary metabolites of red seaweeds (Rhodophyta) are gaining interest because of this challenge. In this context, the possible use of the red seaweed Chondracanthus teedei var. lusitanicus (Gigartinales) as a novel nutraceutical source was investigated. As a result, we highlight the high mineral content of this seaweed, representing 29.35 g 100 g⁻¹ of its dry weight (DW). Despite the low levels of calcium and phosphorus (0.26 and 0.20 g 100 g⁻¹ DW, respectively), this seaweed is an interesting source of nitrogen and potassium (2.13 and 2.29 g⁻¹ DW, accordingly). Furthermore, the high content of carbohydrates (56.03 g 100 g⁻¹ DW), which acts as dietary fibers, confers a low caloric content of this raw food source. Thus, this study demonstrates that C. teedei var. lusitanicus is in fact an unexploited potential resource with the capability to provide key minerals to the human diet with promising nutraceutical properties.

Effects of ocean acidification on the growth and biochemical composition of a green alga (Ulva fasciata) and its associated microbiota

In marine ecosystems, fluctuations in surface-seawater carbon dioxide (CO2), significantly influence the whole metabolism of marine algae, especially during the early stages of macroalgal development. In this study, the response of the green alga Ulva fasciata for elevating ocean acidification was investigated using four levels of pCO2 ~ 280, 550, 750 and 1050 µatm. Maximum growth rate (6.6% day-1), protein (32.43 %DW) and pigment (2.9 mg/g) accumulation were observed at pCO2-550 with an increase of ~2-fold compared to control. On the other hand, lipid and carbohydrate contents recorded their maximum production (4.23 and 46.96 %DW, respectively) at pCO2-750 while control showed 3.70 and 42.37 %DW, respectively. SDS-PAGE showed the presence of unique bands in response to pCO2, especially at 550 µatm. Dominant associated bacteria was shifted from Halomonas hydrothermalis of control to Vibrio toranzoniae at pCO2-1050. These findings suggest that ocean acidification at 550 µatm might impose noticeable effects on growth, protein, pigments, and protein profile of U. fasciata, which could be a good source for fish farming. While, pCO2-750 was recommended for energetic purpose, due to its high lipid and carbohydrate contents.

Influence of Nutrient Manipulation on Growth and Biochemical Constituent in Anabaena variabilis and Nostoc muscorum to Enhance Biodiesel Production

The present study aims to improve biomass and biochemical constituents, especially lipid production of Anabaena variabilis and Nostoc muscorum by formulating an optimal growth condition using various concentrations of nutrients (NO3−, PO43− and CO32−) for biodiesel production. The supplementation of the three nutrients by +50% showed the maximum dry weight and biomass productivity, while the macromolecule contents were varied. The depletion of N-NO3− by 50% N-NO3− showed the maximum lipid yield (146.67 mg L−1) in A. variabilis and the maximum carbohydrate contents (285.33 mg L−1) in N. muscorum with an increase of 35% and 30% over control of the synthetic medium, respectively. However, variation in P-PO43− and C-CO32− showed insignificant improving results for all biochemical compositions in both cyanobacteria. A. variabilis was the superior species for lipid and protein accumulation; however, N. muscorum showed the maximum carbohydrate content. Accordingly, A. variabilis was selected for biodiesel production. In A. variabilis, −50% N-NO3− resulted in 35% higher lipid productivity compared to the control. Furthermore, the fatty acid profile and biodiesel quality-related parameters have improved under this condition. This study has revealed the strategies to improve A. variabilis lipid productivity for biodiesel production for small-scale in vitro application in terms of fuel quality under low nitrate levels.

Impact of Commercial Seaweed Liquid Extract (TAM®) Biostimulant and Its Bioactive Molecules on Growth and Antioxidant Activities of Hot Pepper (Capsicum annuum)

Bioactive molecules derived from seaweed extracts are revolutionary bio-stimulants used to enhance plant growth and increase yield production. This study evaluated the effectiveness of a commercially available seaweed liquid extract, namely, True-Algae-Max (TAM®), as a plant growth stimulant on nutritional, and antioxidant activity of Capsicum annuum. Three concentrations of TAM® (0.25, 0.5, and 1%) of various NPK: TAM® ratios were investigated via foliar spray, over 2017 and 2018 cultivation seasons, under greenhouse conditions. TAM® is rich in phytochemical compounds, such as ascorbic acid (1.66 mg g-1), phenolics (101.67 mg g-1), and flavonoids (2.60 mg g-1) that showed good antioxidant activity (54.52 mg g-1) and DPPH inhibition of 70.33%. Promoting measured parameter results stated the extensive potentiality of TAM® application, in comparison with conventional NPK treatment. Yield and composition of C. annuum were significantly improved in all TAM® treated groups, especially the TAM0.5% concentration, which resulted in maximum yield (4.23 Kg m-2) and significant amounts of profuse biological molecules like chlorophyll, ascorbic, phenolic compounds, flavonoids, and total nutrients. Compared to the NPK control treatments, C. annuum treated with TAM0.5% improved the total antioxidant activity of hot Pepper from 162.16 to 190.95 mg g-1. These findings indicate that the extract of seaweed can be used as an environmentally friendly, multi-functional biostimulant in the agricultural field for more sustainable production, in addition to reducing the use of hazardous synthetic fertilizers.

The Potential of a New Commercial Seaweed Extract in Stimulating Morpho-Agronomic and Bioactive Properties of Eruca vesicaria (L.) Cav

This study aimed to understand the effect of commercial seaweed extract as a biofertilizer, named True-Algae-Max (TAM®), on the yield, nutritional, antioxidant, and cytotoxic activity of Eruca vesicaria. Three concentrations of TAM® (5, 10, and 15%) were studied by foliar spray over the two cultivation years (2016 and 2017) without any chemical fertilizer, along with a control consisting of synthetic nitrogen, phosphorus and potassium (NPK) fertilizers. The yield and composition of E. vesicaria were significantly improved in all treatments, particularly at 10% concentration of TAM®, which resulted in maximum yield (1.99 kg m−2) and significant amounts of chlorophyll, carotenoids, phenolic compounds, flavonoids and total nutrients. Compared to the NPK control, E. vesicaria grown with 10% of TAM® improved total antioxidant activity from 41.80 to 49.36 mg g−1 and cytotoxicity from 25.30 to 60.40% with an IC50 value 85.7 µg mL−1 against the hepatocellular carcinoma cell line (HepG2). These findings indicate that seaweed extract can generally be used as a safe potential multifunctional biofertilizer in the agricultural field. The use of seaweed as a biofertilizer could potentially help mitigate the adverse effects of main nutrient deficiencies, diminishing the use of chemical fertilizers.

Sequential biofuel production from seaweeds enhances the energy recovery: A case study for biodiesel and bioethanol production

In the present study, eight seaweeds (five red, two brown and one green) were collected and evaluated for dual biodiesel and/or bioethanol production. The highest significant lipid and carbohydrate contents were recorded in the brown seaweed Dilophus fasciola (4.92 and 37.97%dw, respectively). Three routes were investigated, namely R1 and R2 for direct production of biodiesel and bioethanol, respectively, from the whole biomass, in addition to R3 representing the sequential biodiesel and bioethanol production. D. fasciola showed a biodiesel yield of 35.04 mg g−1 dw, composed mainly of C16‐C18 fatty acids with a high saturation degree. All biodiesel characteristics complied with the recommended values of international standards. The maximum reducing sugar content (37.2 g L−1) and bioethanol productivity at 72 hours (0.165 g L−1 h−1) were recorded in the lipid‐free biomass (R3), which were 16.3% and 27.9%, respectively, higher than that of R2. Therefore, a maximum estimated total energy output of 9.96 MJ kg−1 was recorded in R3, which represented 6‐times and 28.3% higher than R1 and R2, respectively.