Microplastic properties and their interaction with hydrophobic organic contaminants: a review

Effects of combined exposure to polyethylene and oxidized polycyclic aromatic hydrocarbons on growth, development, and neurobehavior in Zebrafish

Oxygenated polycyclic aromatic hydrocarbons (OPAHs) are a class of anthropogenic, persistent, and highly toxic PAH contaminants associated with developmental toxicity, 9-fluorenone (9-FLO) is a typical member of the OPAH family. Due to its ketone group, it has higher polarity, which results in increased solubility in water and greater potential for transport via atmospheric particles or water bodies. Polyethylene (PE), an amorphous polymer, is characterized by high diffusivity, high permeability, and a large internal molecular free volume, which confers a strong absorption capacity for organic pollutants. The effects of individual and combined exposures to these two common environmental pollutants on aquatic life remain unclear. In this study, we evaluated the effects of PE and 9-FLO exposure on growth, development, metabolism, and behavior using zebrafish as a model organism. We employed methods and techniques such as acridine orange staining, enzyme-linked immunosorbent assay (ELISA), video tracking, automated behavior analysis, microscopy imaging, and real-time fluorescence quantification. Zebrafish embryos at 2 h post-fertilization (hpf) were exposed to PE and 9-FLO, both individually and in combination. Our studies showed that exposure to PE or 9-FLO alone increases embryonic mortality and decreases hatchability compared to the control group. The 9-FLO group exhibited delayed hatching and inhibited larval length growth. The exposed groups showed a loose arrangement of telencephalic neurons, partial apoptosis, decreased dopamine (DA) content, increased serotonin (5-HT) content, decreased exercise capacity, reduced rhythmic amplitude, and increased rest time. The combined exposure group showed a slight alleviation of these effects compared to the single exposure groups but still exhibited significant differences from the control group. In summary, early exposure to PE and 9-FLO in zebrafish embryos, whether alone or in combination, affects growth, development, apoptosis, neurotransmitter release, and motor behavior of zebrafish neurons.

Effects of co-treatment with nano/microplastics and hydroxychloroquine on early development stages of Salmo trutta

As a potential remedy for COVID-19 treatment, hydroxychloroquine (HCQ) attracted considerable scholarly attention early in the pandemic. However, the ecological consequences of HCQ are not well understood, especially regarding their interactions with plastic waste such as nano-and microplastics (PS). This study aimed to investigate colloidal stability, bioaccumulation, and acute toxicity of carboxylate-modified polystyrene-based PS and HCQ, both alone and in combination, to Salmo trutta embryos and larvae. Spectroscopic properties of PS were found to change over time and to be affected by the presence of HCQ in the incubation water of organisms. Confocal microscopy showed that PS and HCQ, both alone and in combination, caused damage to the chorion of the exposed fish embryos. Particles of PS were detected in external tissues of larvae. The impact of the tested substances on fish was found to be dependent on the PS particle size, exposure duration, and the life stage of fish.

Atmospheric microplastics deposition in a central Indian city: Distribution, characteristics and seasonal variations

Atmospheric microplastics (AMPs) transport and deposition in urban areas contribute to microplastics pollution. The present study investigates AMPs deposition, characteristics, potential sources, and the influence of meteorological factors in a central Indian city. AMPs were collected over three land-use types, viz. institutional, commercial, and industrial areas, during four seasons: summer, monsoon, autumn, and winter. The deposition flux of microplastics ranged from 212.53 ± 52.32 to 543.25 ± 71.23 particles/m2/day. The AMPs were predominantly fibres (87.84 %), followed by films (5.43 %), with particle size <1000 μm contributed 43.67 %. The predominant polymer types identified were polyethylene terephthalate (PET, 37.39 %), nylon (20.49 %), and polypropylene (PP, 10.27 %). Higher deposition fluxes were recorded in summer, with 491.06 ± 73.37 particles/m2/day. Correlation analysis revealed a negative correlation between rainfall and AMPs deposition, suggesting a potential cleaning role of rainfall. The estimated annual deposition flux of AMPs in Nagpur city was 3.22 × 1013 particles. Higher AMPs deposition was attributed to plastic waste littering, industrial emissions, and textiles. The estimated mean annual inhalation exposures of AMPs of size 50-250 μm for children and adults were 7375.84 ± 1312.89 and 3738.17 ± 665.39 MPs/kg-bw/year, respectively. The findings of this study contribute to understanding the fate of AMPs and its implications for human exposure. The findings underscore the importance of reducing and managing plastic waste.

Current research status on the distribution and transport of micro(nano)plastics in hyporheic zones and groundwater

Micro(nano)plastics, as an emerging environmental pollutant, are gradually discovered in hyporheic zones and groundwater worldwide. Recent studies have focused on the origin and spatial/temporal distribution of micro(nano)plastics in regional groundwater, together with the influence of their properties and effects of environmental factors on their transport. However, the transport of micro(nano)plastics in the whole hyporheic zone-groundwater system and the behavior of co-existing substances still lack a complete theoretical interpretation. To provide systematic theoretical support for that, this review summarizes the current pollution status of micro(nano)plastics in the hyporheic zone-groundwater system, provides a comprehensive introduction of their sources and fate, and classifies the transport mechanisms into mechanical transport, physicochemical transport and biological processes assisted transport from the perspectives of mechanical stress, physicochemical reactions, and bioturbation, respectively. Ultimately, this review proposes to advance the understanding of the multi-dimensional hydrosphere transport of micro(nano)plastics centered on groundwater, the microorganisms-mediated synergistic transformation and co-transport involving the intertidal circulation. Overall, this review systematically dissects the presence and transport cycles of micro(nano)plastics within the hyporheic zone-groundwater system and proposes prospects for future studies based on the limitations of current studies.

Toxic interactions between fluoxetine and microplastics in zebrafish embryonic development

The increasing use of antidepressants, especially fluoxetine (FLX), has resulted in their presence in aquatic environments due to wastewater discharges from municipal, industrial, and hospital sources. Simultaneously, microplastics (MPs) have been extensively studied in short-term (acute) exposures, showing adverse effects such as oxidative stress, behavioral alterations and neurotoxicity. However, the embryotoxic and teratogenic effects of these compounds, as well as their impacts on the survival, development, morphology, behavior, and reproduction of fish embryos in aquatic ecosystems, remain limited. This study evaluated the toxic effects of FLX (5, 40 ng/L), MPs (25, 100 particles/L) and their mixtures (FLX-MPs) at environmentally relevant concentrations. Microscopic characterization of fluorescent MPs was performed, and their presence was evaluated in Danio rerio embryos at 24 and 96 hpf, observing their localization in the chorion. In embryotoxicity and teratogenesis tests, FLX (100 ng/L) increased the rate of malformations, including deformations of the spine (CD), tail (TM) and hypopigmentation (H); MPs induced scoliosis (S), tail deformation (TM), incomplete hatching (IE) and a dose-dependent increase in malformations. FLX-MPs mixtures caused pericardial edema (PE), tail and spine deformation, delayed hatching (HR) and increased mortality. Oxidative damage analysis showed that FLX (40 ng/L) dose-dependently increased SOD and CAT activities, with an increase in cellular oxidation biomarkers (LPX, POX, HPX). Besides, MPs (100 particles/L) showed similar effects, with increased SOD, CAT, POX and HPX activities. The FLX-MPs mixture showed the most pronounced response. In gene expression, FLX (5, 40 ng/L) modulated genes such as bax, blc2 and casp3. MPs (25, 100 particles/L) induced the expression of bax, blc2, p53 and casp3. FLX-MPs mixtures (25 particles/L-40 ng/L, 100 particles/L-40 ng/L) expressed nfr1, p53, nfe2l2a and casp3. Histological damage revealed abnormal muscle fibers (AMF) and yolk sac edema (YSE) at 40 ng/L FLX, and lamellar fusion (LF) and scoliosis (S) in MPs (100 particles/L). Brain swelling (IBT) and neuromast loss (NL) were detected in FLX-MPs mixtures. In conclusion, both FLX and MPs and their combinations affect the embryonic development and physiological state of Danio rerio.

Organ-Specific Effects of Polystyrene Nanoplastics on Deltamethrin-Induced Toxicity in Mice: Mitigated Hepatorenal Oxidative Damage But Increased Enteric Toxicity

This study investigates the combined effects of polystyrene nanoplastics (PS-NPs) and deltamethrin (DEL) on mice, focusing on their different impacts among organs. Mice were exposed to PS-NPs and/or DEL for 30 days. Results showed that PS-NPs alleviated DEL-induced oxidative damage in the liver and kidney by reducing its accumulation due to decreased bioaccessibility. Conversely, PS-NPs increased DEL accumulation in the intestine, leading to enhanced susceptibility to enteric infections caused by bacteria, viruses, and parasites, as indicated by transcriptomic analysis. PS-NPs delayed DEL excretion by reducing gastrointestinal motility, as evidenced by altered neurotransmitter levels, thereby contributing to greater intestinal accumulation of DEL. Moreover, 16S rDNA sequencing revealed that PS-NPs tended to decrease beneficial bacteria and increase pathogenic bacteria in the gut microbiota, further heightening susceptibility to enteric infections upon coexposure. The findings of this study shed new light on the complex health risks associated with coexposure to nanoplastics and pesticides.

Evaluating Toxic Interactions of Polystyrene Microplastics with Hazardous and Noxious Substances Using the Early Life Stages of the Marine Bivalve Crassostrea gigas

Plastics pose a significant threat to marine ecosystems, owing to their slow biodegradability. Microplastics (MPs), in particular, affect marine life and maricultural organisms and can enter the food chain via ingestion by marine organisms, leading to bioaccumulation in predators, including humans. This study assessed the toxic interactions between polystyrene microplastic particles (PSMPs) and cadmium (Cd) and phenanthrene (Phe) using marine bivalves. While PSMPs were non-toxic to Pacific oysters (Crassostrea gigas), the toxicity of Cd and Phe was concentration-dependent. In most conditions, PSMPs reduced the toxicity of Cd and Phe, but in simultaneous exposure, they acted as Cd messengers, altering the toxicity during the adult stage. This study confirms that PSMPs can interact with coastal environmental pollutants, thereby accelerating biotoxicity and posing a significant threat to marine wildlife, mariculture, and human health. It also highlights the need to assess MP toxicity in coastal environments and their interactions with pollutants.

Effect of polyethylene microplastic biodegradation by algae on their sorption properties and toxicity

Microplastics (MPs) in aquatic environments constitute an ideal surface for biofilm formation, facilitating or hindering the transport of contaminants. This study aims to provide knowledge on the sorption behavior of high-density polyethylene (μ-HDPE) after algal degradation toward UV filters. Up to now, the oxidation of μ-HDPE using the microalga Acutodesmus obliquus has not been studied. The results obtained by infrared spectroscopy (IR), scanning electron microscopy (SEM), and porosimetry analysis revealed a biofilm formation on the surface of μ-HDPE and the presence of carbonyl and double bond functional groups. Also, this is the first time that the simultaneous sorption of benzophenone (BPh), 4-methylbenzylidene camphor (4MBC), benzophenone 3 (BPh3), and benzophenone 2 (BPh2) onto biofilm-covered HDPE (biofilm-HDPE) in water have been studied. Filters' sorption on biofilm-HDPE particles follows pseudo-second-order kinetics, and film diffusion was the stage that limited the sorption rate. The Langmuir isothermal model describes the adsorption process for 4MBC, BPh, and BPh2 well, and the linear model is fit for the sorption of BPh3. Hydrophobic interactions, van der Waals forces, electrostatic, and π-π bon are the main mechanisms responsible for the sorption. Biological analysis indicated that HDPE at concentrations of 500 mg L-1 inhibits A. obliquus growth and reduces the levels of proteins, sugars, and chlorophylls. In contrast, the activity of antioxidant enzymes and the contents of small molecular weight antioxidants significantly increased in algal cells treated with microplastic. These findings confirm the toxicity of μ-HDPE and demonstrate the induction of defense mechanisms in A. obliquus as a response to environmental pollutants.

Sorption behavior of oxytetracycline on microplastics and the influence of environmental factors in groundwater: Experimental investigation and molecular dynamics simulation

Microplastics (MPs) and antibiotics can enter groundwater through the interaction of soil and surface water, and MPs as carriers of antibiotics can promote the migration of antibiotics and thus generate more serious ecological risks. Therefore, this paper used experimental and molecular dynamics (MD) simulation methods to investigate the sorption between four common types of MPs in groundwater, namely polyamide (PA), polystyrene (PS), polyvinyl chloride (PVC), and polyethylene (PE), and oxytetracycline (OTC) with high detection rate in groundwater. Additionally, the impact of environmental factors on sorption was examined. The sorption kinetics of the four types of MPs followed the pseudo-second-order kinetics model, and the sorption isotherms of OTC on PA, PE, and PVC were highly linear, suggesting that the electrostatic interaction was the main sorption mechanism. Both experimental and simulation results indicated that PA had the highest affinity for OTC, due to the effect of the formation of hydrogen bonding between the amide groups of PA and OTC. The primary way pH affected sorption was by altering the form in which OTC exists. The effects of the representative substances of protein-like component (bovine serum albumin) and humus-like component (humic acid) in dissolved organic matter varied but were generally inhibitory. Ions could influence the sorption process by competitive sorption or forming complexes with the OTC.

The Combined Toxic Effects of Polystyrene Microplastics and Arsenate on Lettuce Under Hydroponic Conditions

The combined pollution of microplastics (MPs) and arsenic (As) has gradually been recognized as a global environmental problem, which calls for detailed investigation of the synergistic toxic effects of MPs and As on plants and their mechanisms. Therefore, the interaction between polystyrene microplastics (PS-MPs) and arsenate (AsO43-) (in the following text, it is abbreviated as As(V)) and its toxic effects on lettuce were investigated in this study. Firstly, chemisorption was identified as the main mechanism between PS-MPs and As(V) by the analysis of adsorption kinetics, adsorption thermodynamics, and Fourier transform infrared spectroscopy (FTIR). At the same time, the addition of As(V) promoted the penetration of PS-MPs through the continuous endodermal region of the Casparis strip. Furthermore, compared with the CK group, it was found that the co-addition of As(V) exacerbated the lowering effect of PS-MPs on the pH value of the rhizosphere environment and the inhibitory effect on root growth. In the P20V10 group, the pH decreased by 33.0%. Compared to the CK group, P20, P20V1, and P20V10 decreased the chlorophyll content by 68.45% (16 SPAD units), 71.37% (17.73 SPAD units), and 61.74% (15.36 SPAD units) and the root length by 19.31% (4.18 cm), 50.72% (10.98 cm), and 47.90% (10.37 cm) in lettuce. P5V10 and P20V10 increased CAT content by 153.54% (33.22 U·(mgprol)-1) and 182.68% ((38.2 U·(mgprol)-1)), Ca by 31.27% and 37.68%, and Zn by 41.85% and 41.85%, but the presence of As(V) reduced Na by 22.85% (P5V1) and 49.95% (P5V10). The co-exposure significantly affected the physiological and biochemical indicators as well as the nutritional quality of the lettuce. Finally, the metabolomic analysis of the lettuce leaves showed that combined pollution with PS-MPs and As(V) affected the metabolic pathways of the tricarboxylic acid cycle (TCA cycle), sulfur metabolism, and pyruvate metabolism. This study provides data for pollution management measures for co-exposure to PS-MPs and As(V).

Factors Influencing the Vertical Migration of Microplastics up and down the Soil Profile

Soil ecosystems are under serious threat from microplastics (MPs), and this is causing worldwide concern. The relationship between soil and MPs has become a popular research topic, and the vertical migration of soil MPs is of increasing interest. This Review summarizes the current status of research into the factors affecting the vertical migration of soil MPs. Published research shows that the characteristics of MPs and the physicochemical properties of the soil affect the infiltration process. Soil organisms play a key role in the vertical migration by acting as vectors or as a result of adsorption. Dissolved organic matter and metal oxides transfer MPs by adsorption-desorption. In addition, rainfall and dry-wet cycles alter the mobility of soil MPs, leading to changes in migration processes. Agricultural activities such as tillage and irrigation may distribute MPs throughout the topsoil. Vertical migration of soil MPs is a process influenced by a combination of factors, and the role of these factors in MP deposition needs to be explored further.

Microplastics in freshwater food chains: Priority list based on identification of oxidative stress response characteristic

Exogenous exposure to high concentrations of microplastics (MPs) cause oxidative damage to freshwater food chains (FFCs). Thus, the patterns and mechanisms of oxidative stress responses (OSRs) induced by MPs in FFC organisms were investigated using theoretical simulation methods. Results showed an increasing (reduced) OSR was found in lower trophic levels (higher trophic levels). Besides, polycarbonate (polyvinyl chloride) causes the most (least) significant OSRs in FFC organisms, respectively. The impacts of MP additives were also analyzed using the full factorial experimental design, revealing flame retardants significantly influence oxidative stress variability. A constructive solution of "restriction-control-focus" is proposed for different types of MPs by the coefficient of variation-corrected CRITIC and the nested mean classification method. The mechanism analysis revealed a positive correlation between protein secondary structure orderliness and OSRs. Proteins in organisms that contain a high proportion of hydrophobic non-polar amino acids are more likely to bind to MP and enhance OSRs. This is the first study assessing the OSR patterns and ecological risks of MPs and their additives in FFCs with a proposed priority list, providing theoretical support for risk assessments and management strategies in freshwater environments.

Polystyrene nanoplastics: optimized removal using magnetic nano-adsorbent and toxicity assessment in zebrafish embryos

Purpose

The presence of microplastics (MPs) and nanoplastics (NPs) in aquatic ecosystems has raised serious environmental and health concerns. Polystyrene is one of the most abundant plastic polymers found in the environment. Polystyrene MPs/NPs have harmful implications for human health and their removal from the environment has become a serious challenge.

Methods

In this study, we investigated the adsorptive uptake of polystyrene nanoplastics (PS NPs) from aqueous solutions using fly ash-loaded magnetic nanoparticles (FAMNPs) as the magnetic nano-adsorbent. During the factor screening study, the adsorption process was studied as a function of four variables namely pH (5-10), adsorption time (30-120 min), amount of FAMNPs (0.01-0.04 g), and stirring speed (50-200 rpm). Central composite design (CCD) and response surface methodology (RSM) were employed to establish the relationship between the variables. Furthermore, toxicity assessments of PS NPs were checked on a zebrafish model, shedding light on its potential ecological effects.

Results

Two variables namely the pH and amount of FAMNPs significantly influenced the adsorption capacity of FAMNPs and were further optimized for subsequent analysis. The optimum operational readings proposed by the model were pH (8.5), and the amount of FAMNPs (0.03 g), resulting in a good adsorption capacity of 29.12 mg/g for PS NPs. The adequacy of the proposed model was evaluated by analysis of variance (ANOVA). Zebrafish embryos exposed to PS NPs revealed physical deformations such as pericardial edema and malformed notochord.

Conclusion

The study demonstrates the effectiveness of FAMNPs in the adsorption of PS NPs from aqueous solutions, with optimal conditions identified at pH 8.5 and 0.03 g of FAMNPs using RSM. The adequacy of the model was confirmed through ANOVA analysis. Toxicity assessments on zebrafish embryos exposed to PS NPs revealed significant mortality and physical deformations, highlighting the importance of PS NPs removal for environmental health.

Graphical Abstract

Local and systemic effects of microplastic particles through cell damage, release of chemicals and drugs, dysbiosis, and interference with the absorption of nutrients

Microplastic particles (MPs) have been detected in a variety of environmental samples, including soil, water, food, and air. Cellular studies and animal exposures reported that exposure to MPs composed of different polymers might result in adverse effects at the portal of entry (local) or throughout the body (systemic). The most relevant routes of particle uptake into the body are oral and respiratory exposure. This review describes the various processes that may contribute to the adverse effects of MPs. Only MPs up to 5 µm were found to cross epithelial barriers to a significant extent. However, MPs may also exert a detrimental impact on human health by acting at the epithelial barrier and within the lumen of the orogastrointestinal and respiratory tract. The potential for adverse effects on human health resulting from the leaching, sorption, and desorption of chemicals, as well as the impact of MPs on nutritional status and dysbiosis, are reviewed. In vitro models are suggested as a means of (1) assessing permeation, (2) determining adverse effects on cells of the epithelial barrier, (3) examining influence of digestive fluids on leaching, desorption, and particle properties, and (4) role of microbiota-epithelial cell interactions. The contribution of these mechanisms to human health depends upon exposure levels, which unfortunately have been estimated very differently.

Microplastic atmospheric pollution in an urban Southern Brazil region: What can spider webs tell us?

The World Health Organization categorizes air pollution as the presence of one or more contaminants in the atmosphere such as smoke, dust, and particulate matter like microplastics, which are considered a priority pollutant. However, only a few studies have been developed on atmospheric pollution, and knowledge about MPs in the atmosphere is still limited. Spider webs have been tested and used as a passive sampling approach to study anthropogenic pollution. Despite this, studies on microplastic contamination using spiderwebs as samplers are scarce. Thus, this study uses spider webs as passive indicators to investigate air quality regarding microplastic contamination in an urbanized area. Therefore, 30 sampling points were selected, and webs of Nephilingis cruentata were collected. The spider webs were dipped in KOH 10 %. After digestion, the solution was washed and sieved through a 90 µm geological sieve. The remaining material was transferred to a Petri dish with filter paper, quantified, and identified by type and color. The chemical composition of the polymers was determined using Raman spectroscopy. 3138 microplastics were identified (2973 filaments and 165 fragments). The most frequent colors were blue and black. Raman spectroscopy revealed five types of polymers: Isotactic Polypropylene, Polyethylene Terephthalate, Polyurethane, Polyamide, and Direct Polyethylene.

Interaction of Micro- and Nanoplastics with Enzymes: The Case of Carbonic Anhydrase

Microplastics (MPs) and nanoplastics (NPs) have emerged as significant environmental pollutants with potential detrimental effects on ecosystems and human health. Several studies indicate their interaction with enzymes; this topic represents a multifaceted research field encompassing several areas of interest from the toxicological and ecotoxicological impact of MPs and NPs on humans and wildlife to the biodegradation of plastics by microbial enzymes. This review aims to provide a critical analysis of the state-of-the-art knowledge of the interaction of MPs and NPs on the enzyme carbonic anhydrase (CA), providing recent insights, analyzing the knowledge gaps in the field, and drawing future perspectives of the research and its application. CA is a widespread and crucial enzyme in various organisms; it is critical for various physiological processes in animals, plants, and bacteria. It catalyzes the reversible hydration of CO2, which is essential for respiration, acid-base balance, pH homeostasis, ion transport, calcification, and photosynthesis. Studies demonstrate that MPs and NPs can inhibit CA activity with mechanisms including adsorption to the enzyme surface and subsequent conformational changes. In vitro and in silico studies highlight the role of electrostatic and hydrophobic interactions in these processes. In vivo studies present mixed results, which are influenced by factors like particle type, size, concentration, and organism type. Moreover, the potentiality of the esterase activity of CA for plastic degradation is discussed. The complexity of the interaction between CA and MPs/NPs underscores the need for further research to fully understand the ecological and health impacts of MPs and NPs on CA activity and expression and glimpses of the potentiality and perspectives in this field.

Polyamide 6 microplastics as carriers led to changes in the fate of bisphenol A and dibutyl phthalate in drinking water distribution systems: The role of adsorption and interfacial partitioning

Microplastics (MPs) co-exist with plastic additives and other emerging pollutants in the drinking water distribution systems (DWDSs). Due to their strong adsorption capacity, MPs may influence the occurrence of additives in DWDSs. The article investigated the occurrence of typical additives bisphenol A (BPA) and dibutyl phthalate (DBP) in DWDSs under the influence of polyamide 6 (PA6) MPs and further discussed the partitioning of BPA/DBP on PA6s, filling a research gap regarding the impact of adsorption between contaminants on their occurrence within DWDSs. In this study, adsorption experiments of BPA/DBP with PA6s and pipe scales were conducted and their interaction mechanisms were investigated. Competitive adsorption experiments of BPA/DBP were also carried out with site energy distribution theory (SEDT) calculations. The results demonstrated that PA6s might contribute to the accumulation of BPA/DBP on pipe scales. The adsorption efficiencies of BPA/DBP with both PA6s and pipe scales were 26.47 and 2.61 times higher than those with only pipe scales. It was noteworthy that BPA had a synergistic effect on the adsorption of DBP on PA6s, resulting in a 26.47 % increase in DBP adsorption. The article provides valuable insights for the compounding effect of different types of additives in water quality monitoring and evaluation.

Polycyclic aromatic hydrocarbon derivatives onto polar microplastics of polyurethane: equilibrium, thermodynamics, and kinetics of monolayer-multilayer adsorption

The study of the adsorption of polycyclic aromatic hydrocarbons on microplastics (MPs) has attracted much attention as to how microplastics can act as carriers of these pollutants. Polyurethane (PU) is one of the MPs found in aquatic environments, containing different functional groups it can interact with polar and nonpolar molecules. PAH derivatives (dPAHs) present different properties and thus can be adsorbed by different interactions; thus, this study investigated the adsorption of fluorene (FLN), dibenzothiophene (DBT), dibenzofuran (DBF), and carbazole (CBZ) onto PU MP. The Langmuir, Freundlich, and BET isotherm models were examined, and the BET model best fitted. The adsorption was a nonspontaneous process, exothermic for mono- and multilayer formation for FLN, DBT, and CBZ, and endothermic for DBF monolayer formation. The adsorption monolayer was formed by van der Waals forces, H─bonding, and π─π interactions, while the formation of the multilayer can be explained by π─π and hydrophobic interactions. The pseudo-second-order model proved to be more consistent for the adsorption of dPAHs. The adsorption in artificial seawater shows no significant differences for the monolayer but favored the adsorption multilayer due to the salting-out effect. Due to the existence of several adsorption mechanisms, PU MP interacts with dPAHs in greater quantities when compared to a MP with a simpler structure.

Microbial Succession on Microplastics in Wastewater Treatment Plants: Exploring the Complexities of Microplastic-Microbiome Interactions

Despite some effectiveness of wastewater treatment processes, microplastics accumulate in sewage sludge and their further use may contribute to the release of plastic microplastics into the environment. There is an urgent need to reduce the amount of microplastics in sewage sludge. Plastic particles serve as solid substrates for various microorganisms, promoting the formation of microbial biofilms with different metabolic activities. The biofilm environment associated with microplastics will determine the efficiency of treatment processes, especially biological methods, and the mechanisms of organic compound conversion. A significant source of microplastics is the land application of sewage sludge from wastewater treatment plants. The detrimental impact of microplastics affects soil enzymatic activity, soil microorganisms, flora, fauna, and plant production. This review article summarizes the development of research related to microplastics and discusses the issue of microplastic introduction from sewage sludge. Given that microplastics can contain complex composite polymers and form a plastisphere, further research is needed to understand their potential environmental impact, pathogenicity, and the characteristics of biofilms in wastewater treatment systems. The article also discusses the physicochemical properties of microplastics in wastewater treatment plants and their role in biofilm formation. Then, the article explained the impact of these properties on the possibility of the formation of biofilms on their surface due to the peculiar structure of microorganisms and also characterized what factors enable the formation of specific plastisphere in wastewater treatment plants. It highlights the urgent need to understand the basic information about microplastics to assess environmental toxicity more rationally, enabling better pollution control and the development of regulatory standards to manage microplastics entering the environment.

Microplastics and Co-pollutants in soil and marine environments: Sorption and desorption dynamics in unveiling invisible danger and key to ecotoxicological risk assessment

Microplastics (MPs) and their co-pollutants pose significant threats to soil and marine environments, necessitating understanding of their colonization processes to combat the plastic pandemic and protect ecosystems. MPs can act as invisible carriers, concentrating and transporting pollutants, leading to a more widespread and potentially toxic impact than the presence of either MPs or the pollutants alone. Analyzing the sorption and desorption dynamics of MPs is crucial for understanding pollutants amplification and predicting the fate and transport of pollutants in soil and marine environments. This review provides an in-depth analysis of the sorption and desorption dynamics of MPs, highlighting the importance of considering these dynamics in ecotoxicological risk assessment of MPs pollution. The review identifies limitations of current frameworks that neglect these interactions and proposes incorporating sorption and desorption data into robust frameworks to improve the ability to predict ecological risks posed by MPs and co-pollutants in soil and marine environments. However, failure to address the interplay between sorption and desorption can result in underestimation of the true impact of MPs and co-pollutants, affecting livelihoods and agro-employments, and exacerbate poverty and community disputes (SDGs 1, 2, 3, 8, 9, and 16). It can also affect food production and security (SDG 2), life below water and life on land (DSGs 14 and 15), cultural practices, and natural heritage (SDG 11.4). Hence, it is necessary to develop new approaches to ecotoxicological risk assessment that consider sorption and desorption processes in the interactions between the components in the framework to address the identified limitations.

Impact on sulfadiazine bio-accessibility in soils through organic diffusive gradients in thin films (o-DGT): Differentiation based on microplastic polymers, aging, and soil properties

Due to the similar sources of swage irrigation, organic fertilizer, and sludge application, microplastics (MPs) and antibiotics coexist inevitably in the agriculture soils. However, the impacts of MPs with different polymer types and aging status on the bio-accessibility of co-existing antibiotics in soils remained unclear. Therefore, we using the diffusive gradients films for organic compounds devices (o-DGT) to evaluated the distribution of sulfadiazine (SDZ) in both paddy soil and saline soil amended with 0.5 % (w/w) MPs. Four polymer types (polyethylene: PE, polypropylene: PP, polyamide: PA, and polyethylene terephthalate: PET) and two aging statuses (aged PE and aged PP) of MPs were used in this study. Results showed that soil properties significantly influence the partition of SDZ in soil and soil solution, and SDZ gained a lower degradation rate but higher mobility in saline soil. MPs pose different impacts on partition of SDZ between paddy soil and saline soil. Notably, PP reduced the labile solid phase-solution phase partition coefficient (Kdl) by 17.7 % in paddy soil, while PE, PP, and aPE increased the Kdl value by 2.00, 1.62, and 2.81 times in saline soil. Besides, in saline soil, all the MPs reduced the SDZ concentration in the soil solution, while significantly increased the SDZ in o-DGT phase. Conversely, MPs did not impact the SDZ's o-DGT concentration in paddy soil. Additionally, MPs increased the R value of SDZ in two soils, especially in saline soil. It suggested that MPs could potentially enhance the resupply of SDZ from soil to plants, particularly under saline conditions. Furthermore, aged MPs had a more pronounced effect on these indicators compared to virgin MPs in saline soil. Therefore, MPs in soil poses a potential risk for biota's uptake of SDZ, particularly in fragile environment. Moreover, the risk intensifies with aged MPs.

Adsorption behaviors of perfluorooctanoic acid on aged microplastics

The presence of perfluoroalkyl substances (PFAS) in the environment poses a significant threat to ecological safety and environmental health. Widespread microplastics (MPs) have been recognized as vectors for emerging contaminants due to human activities. However, the adsorption behaviors of PFAS on MPs, especially on aged MPs, have not been extensively investigated. This study aimed to investigate the adsorption behaviors of perfluorooctanoic acid (PFOA) on aged MPs (polystyrene, polyethylene, and polyethylene terephthalate) treated with UV irradiation and persulfate oxidation under salinity and dissolve organic matter (DOM) condition. Carbonyl index values of MPs increased after the aged treatment, indicating the production of oxygen-containing groups. The PFOA adsorption on aged MPs was impacted by the co-existence of Na+ ions and DOM. As PFOA adsorption onto aged MPs was mainly controlled by hydrophobic interaction, the electrostatic interaction also made a contribution, but there was no significant change in PFOA adsorption behavior between the pristine and aged MPs. While these findings provide insight into PFAS adsorption on aged MPs, further research is necessary to account for the complexity of the real environment. PRACTITIONER POINTS: Adsorption behaviors of perfluorooctanoic acid (PFOA) on aged microplastics were investigated. Hydrophobic interaction mainly controlled PFOA adsorption on aged microplastics (MPs). Co-existence dissolve organic matter and salinity influenced PFOA adsorption behaviors on aged MPs.

Influence of ongoing discharge from multiple wastewater treatment plants on microplastic patterns in small-scale receiving rivers

As widely acknowledged, wastewater treatment plants (WWTPs) stand as significant contributors to the presence of microplastics in surface water. Nonetheless, there exists a notable research gap regarding the extent of potential pollution resulting from the concurrent and uninterrupted discharges originating from multiple WWTPs into small-scale receiving water bodies. This study endeavors to address this knowledge deficit by conducting a thorough investigation into the prevalence of microplastics in surface water. The research encompasses seven distinct locations within the Changzhou section of the Beijing-Hangzhou Grand Canal and the effluent of three WWTPs situated along the tributary. The results indicate differences in the distribution of microplastics in surface waters of mainstream and tributaries. While the microplastic abundance and composition showed little variation along the main stream, the tributaries displayed an overall increasing trend in microplastic abundance from upstream to downstream. Notably, the major contributors to this increase were fragments, fiber particles, and microplastics with particle sizes ranging from 100 to 300 μm. Considering that the primary distinction between the tributaries and the mainstream is the presence of the three WWTPs along the tributaries, the study conducted a correlation analysis between river surface water and effluents from these plants. The results indicated a stronger correlation between the tributaries and the effluents, suggesting that WWTPs are one of the primary factors contributing to the elevated levels of microplastics in the tributaries. Finally, a comparative analysis of microplastic abundance in the Beijing-Hangzhou Grand Canal's Changzhou section and other regions was conducted. The findings revealed that the microplastic pollution level in the Beijing-Hangzhou Grand Canal's Changzhou section is higher than that in most other rivers. Therefore, the issue of microplastic pollution in the Beijing-Hangzhou Grand Canal's Changzhou section warrants our attention, particularly with regard to the effectiveness of microplastic removal by the WWTPs along its course.

Effects of polystyrene nanoplastics and PCB-44 exposure on growth and physiological biochemistry of Chlorella vulgaris

Both NPs and PCBs are emerging contaminants widely distributed in the environment, and it is worth exploring whether the combination of the two contaminants causes serious pollution and harm. Therefore, we studied the effects of PS-NPs and PCB-44 alone and together after 96 h and 21 d of exposure to C. pyrenoidosa. The results showed that PS-NPs and PCB-44 affected the cell cycle of C. pyrenoidosa and inhibited its normal growth. Under PS-NPs and PCB-44 stress, the relative conductivity of the algal solution increased, the hydrophobicity of the algal cell surface decreased, and the synthesis of chlorophyll a and chlorophyll b was reduced. In addition to physiological, there are biochemical effects on C. pyrenoidosa. PS-NPs and PCB-44 exposure induced oxidative stress with significant changes in the enzymatic activities of SOD and CAT together with MDA content. Moreover, the relative expression of photosynthesis-related genes (psbA, rbcL, rbcS) all responded, negatively affecting photosynthesis. In particular, significant toxic effects were observed with single exposure to PCB-44 and co-exposure to PS-NPs and PCB-44, with similar trends of effects in acute and chronic experiments. Taken together, exposure to PS-NPs and PCB-44 caused negative effects on the growth and physiological biochemistry of C. pyrenoidosa. These results provide scientific information to further explore the effects of NPs and PCBs on aquatic organisms and ecosystems.

Aging microplastics enhances the adsorption of pharmaceuticals in freshwater

Plastic pollution is an increasing environmental concern. Pollutants such as microplastics (< 5 mm) and pharmaceuticals often co-exist in the aquatic environment. The current study aimed to elucidate the interaction of pharmaceuticals with microplastics and ascertain how the process of photo-oxidation of microplastics affected the adsorption of the pharmaceuticals. To this end, a mixture containing ibuprofen, carbamazepine, fluoxetine, venlafaxine and ofloxacin (16 μmol L-1 each) was placed in contact with one of six either virgin or aged microplastic types. The virgin microplastics were acquired commercially and artificially aged in the laboratory. Polypropylene, polyethylene, polyethylene terephthalate, polyamide, polystyrene, and polyvinyl chloride microparticles at two sizes described as small (D50 < 35 μm) and large (D50 95-157 μm) were evaluated. Results demonstrated that the study of virgin particles may underestimate the adsorption of micropollutants onto microplastics. For virgin particles, only small microparticles of polypropylene, polyethylene, polyvinyl chloride, and both sizes of polyamide adsorbed pharmaceuticals. Aging the microplastics increased significantly the adsorption of pharmaceuticals by microplastics. Fluoxetine adsorbed onto all aged microplastics, from 18 % (large polyethylene terephthalate) to 99 % (small polypropylene). The current investigation highlights the potential of microplastics to act as a vector for pharmaceuticals in freshwater, especially after aging.

Quantification and characterization of airborne microplastics in the coastal area of Terengganu, Malaysia

Microplastics (MPs) pose a threat to ecosystems due to their capacity to bind with toxic chemicals. While the occurrence of MPs in aquatic environmental matrices like water, sediments, and biota is well studied, their presence in the atmosphere remains less understood. This study aimed to determine the presence of airborne MPs and their characteristics through ground-based sampling in the coastal city of Kuala Nerus, Terengganu, Malaysia. Airborne MP samples were collected using passive sampling technique in December 2019. MPs were manually counted and identified using a stereomicroscope based on their colour and shape. The average deposition rate of airborne MPs during the sampling period was 5476 ± 3796 particles/m2/day, ranging from 576 to 15,562 particles/m2/day. Various colours such as transparent (38%), blue (25%), black (20%), red (13%), and others (4%) were observed. The predominant shape of airborne MPs was fibres (> 99%). The morphology structure of MPs observed using a scanning electron microscope (SEM) showed a cracked surface on MPs, suggesting weathering and irregular fragmentation. Further elemental analysis using energy dispersive X-ray spectroscopy (EDS) showed the presence of heavy metals such as aluminium (Al) and cadmium (Cd) on the surface of MPs, attributed to the adsorption capacities of MPs. Polymer types of airborne MPs were analysed using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), which revealed particles composed of polyester (PES), polyethylene (PE), and polypropylene (PP). The preliminary findings could provide additional information for further investigations of MPs, especially in the atmosphere, to better understand their sources and potential human exposure.

Mechanistic insight into the role of typical microplastics in chlorination disinfection: Precursors and adsorbents of both MP-DOM and DBPs

Microplastics (MPs) in drinking water are predominantly < 10 µm. The leaching of MPs derived dissolved organic matters (MP-DOM) from 5 µm polypropylene MPs (PP-MPs) and polystyrene MPs (PS-MPs) and the formation of MP-DOM derived disinfection byproducts during chlorination disinfection were first investigated. Comparably, PS-MPs are more vulnerable to chlorination and the primary attacks are on para C in aromatic side-chains via electrophilic Cl-substitution and oxidation by two-electron transfer. The O/C and Cl/C ratio of polystyrene MPs was linear and exponential versus initial available Cl2 concentrations, respectively. The significant PS-DOM leaching was observed with initial available Cl2 of 4.0 mg/L (USEPA recommended upper dose). As the initial available Cl2 concentration increased to 8.0 mg/L, the adsorption of chloro-phenolic-components of 200 Daltons in PS-DOM by 5 µm PS-MPs was observed for the first time. Trichloromethane (TCM) was identified as the dominant disinfection byproduct with a formation potential of 60.3 ± 7.8 and 73.7 ± 9.8 μg/mg for PS-DOM and PP-DOM, respectively. The derived TCM could adsorb onto PS-MPs followed the pseudo-second-order kinetic and Langmuir isotherm models. Extreme chlorination could reduce the maximal adsorption capacity of TCM on 5 µm PS-MPs from 196.68 ± 48.66 to 146.02 ± 32.98 μg/g. Thus, PS-MPs act as precursors and carriers of TCM in chlorination.

Deposition behaviors of carboxyl-modified polystyrene nanoplastics with goethite in aquatic environment: Effects of solution chemistry and organic macromolecules

The ubiquitous nanoplastics (NPs) in the environment are emerging contaminants due to their risks to human health and ecosystems. The interaction between NPs and minerals determines the environmental and ecological risks of NPs. In this study, the deposition behaviors of carboxyl modified polystyrene nanoplastics (COOH-PSNPs) with goethite (α-FeOOH) were systematically investigated under various solution chemistry and organic macromolecules (OMs) conditions (i.e., pH, ionic type, humic acid (HA), sodium alginate (SA), and bovine serum albumin (BSA)). The study found that electrostatic interactions dominated the interaction between COOH-PSNPs and goethite. The deposition rates of COOH-PSNPs decreased with an increase in solution pH, due to the enhanced electrostatic repulsion by higher pH. Introducing cations or anions could compress the electrostatic double layers and compete for interaction sites on COOH-PSNPs and goethite, thereby reducing the deposition rates of COOH-PSNPs. The stabilization effects, which were positive with ions valence, followed the orders of NaCl ≈ KCl < CaCl2, NaNO3 ≈ NaCl < Na2SO4 < Na3PO4. Specific adsorption of SO42- or H2PO4- caused a potential reversal of goethite from positive to negative, leading to the electrostatic forces between COOH-PSNPs and goethite changed from attraction to repulsion, and thus significantly decreasing deposition of COOH-PSNPs. Organic macromolecules could markedly inhibit the deposition of COOH-PSNPs with goethite because of enhanced electrostatic repulsion, steric hindrance, and competition of surface binding sites. The ability for inhibiting the deposition of COOH-PSNPs followed the sequence of SA > HA > BSA, which was related to their structure (SA: linear, semi-flexible, HA: globular, semi-rigid, BSA: globular, with protein tertiary structure) and surface charge density (SA > HA > BSA). The results of this study highlight the complexity of the interactions between NPs and minerals under different environments and provide valuable insights in understanding transport mechanisms and environmental fate of nanoplastics in aquatic environments.

Surface functional groups and biofilm formation on microplastics: Environmental implications

Microplastics (MPs) contamination is becoming a significant environmental issue, as the widespread omnipresence of MPs can cause many adverse consequences for both ecological systems and humans. Contrary to what is commonly thought, the toxicity-inducing MPs are not the original pristine plastics; rather, they are completely transformed through various surface functional groups and aggressive biofilm formation on MPs via aging or weathering processes. Therefore, understanding the impacts of MPs' surface functional groups and biofilm formation on biogeochemical processes, such as environmental fate, transport, and toxicity, is crucial. In this review, we present a comprehensive summary of the distinctive impact that surface functional groups and biofilm formation of MPs have on their significant biogeochemical behavior in various environmental media, as well as their toxicity and biological effects. We place emphasis on the role of surface functional groups and biofilm formation as a means of influencing the biogeochemical processes of MPs. This includes their effects on pollutant fate and element cycling, which in turn impacts the aggregation, transport, and toxicity of MPs. Ultimately, future research studies and tactics are needed to improve our understanding of the biogeochemical processes that are influenced by the surface functional groups and biofilm formation of MPs.

Interaction of fluorene and its analogs with high-density polyethylene microplastics: An assessment of the adsorption mechanism to establish the effects of heteroatoms in the molecule

The threat of microplastics (MP) pollution in aquatic ecosystems can be even more severe for they are able to interact with organic pollutants that can migrate to adjacent environments. The presence of heteroatoms in organic pollutants can directly influence adsorption onto MP. This research evaluated the adsorption of fluorene (FLN) and its heteroatom analogs dibenzothiophene (DBT), dibenzofuran (DBF) and carbazole (CBZ) onto high-density polyethylene (HDPE) MP from residual (HDPEres) and commercial (HDPEcom) sources. The Langmuir isotherm showed a better fit, while DBT showed higher maximum adsorption capacity (19.2 and 15.8 μmol g-1) followed by FLN (13.4 and 11.7 μmol g-1), and DBF (13.5 and 10.3 μmol g-1) to the HDPEcom and HDPEres, respectively, which indicates a direct correlation with the hydrophobicity of the molecules determined by Log Kow. In contrast, CBZ showed no significant interaction with MP, due to their polar characteristic, thus, no kinetic and thermodynamic parameters could be determined. The adsorption process of all PAH was determined to be exothermic and spontaneous, with low temperatures favoring the process. The pseudo-second-order kinetic models have fitted to the adsorption onto both HDPE; intraparticle diffusion was also observed. Computational studies, physical characterization techniques and batch adsorption experiments demonstrated that the mechanism is governed by hydrophobic interactions, with van der Waals forces as a secondary effect in the adsorption of FLN, DBT and DBF onto HDPEres and HDPEcom. Thus, allowing a deeper understanding of the interactions between HDPE MP and FLN as well with its derivatives.

How natural and anthropogenic factors should drive microplastic behavior and fate: The scenario of Brazilian urban freshwater

Brazil maintains its position at the top of the global ranking of plastic producers, yet recycling efforts have been incipient. Recent data reveals an annual production of approximately 14 million tons of plastic waste, not accounting for the surge in the usage of plastic masks and related materials due to the COVID-19 pandemic. However, what remains largely unreported is that over half of post-consumer plastic packaging in Brazil is managed without any monitoring, and it remains unclear how this will contribute to the occurrence of plastic waste and microplastics in Brazilian freshwaters. This scenario requires the consideration of several other crucial factors. Studies have been carried out mainly in marine and estuarine waters, while data on freshwaters are lacking. Brazil has continental dimensions and the highest water availability on the planet, yet the demand for water is greatest in regions with medium to low supply. Many densely populated Brazilian urban areas face chronic flood problems, possess inadequate levels of wastewater treatment, and display inadequate solid waste management practices. Consequently, urban freshwater with tropical characteristics in Brazil presents an intriguing scenario and is complementary to the most commonly studied marine environments. In this study, we explore the nuances of pollution in Brazilian urban freshwater and discuss how various parameters, such as organic matter, suspended solids, temperature, and pH, among others, influence the behavior of microplastics and their interactions with organic and inorganic contaminants. Furthermore, we address how microplastic conditions, such as biofouling, the type of plastic, or degradation level, may impact their behavior. By analyzing how these conditions change, we propose priority themes for investigating the occurrence of microplastics in Brazilian urban freshwater systems under different degrees of human impact. Ultimately, this study aims to establish a network dedicated to standardized monitoring of microplastic pollution in Brazilian urban freshwaters.

Plants forage for soil patches free of plastic pollution but cannot bag the profits

Microplastics can affect their surroundings physically and chemically, resulting in diverse effects on plant-soil systems. Similar to other substances (e.g. nutrients and water), microplastics in the environment occur in patches. Such heterogeneous distributions could affect plant responses to plastic pollution. Yet, this has remained untested. We conducted a multispecies experiment including 29 herbaceous plant species and three different microplastic treatments (a control without microplastics, a homogeneous and a heterogeneous microplastic distribution). Based on biomass and root-morphological traits, we assessed how different plastic distributions affect the performance and root-foraging behavior of plants, and whether stronger root foraging is beneficial when microplastics are distributed patchily. Next to general effects on plant productivity and root morphology, we found very strong evidence for root-foraging responses to patchy plastic distributions, with a clear preference for plastic-free patches, resulting in 25% longer roots and 20% more root biomass in the plastic-free patches. Interestingly, however, these foraging responses were correlated with a reduced plant performance, indicating that the benefits of plastic avoidance did not compensate for the associated investments. Our results provide new insights in plant-microplastic interactions and suggest that plants might not just be passively affected by but could also actively respond to environmental plastic pollution.

Microplastics in cultivated soil environment: Construction of toxicity grading evaluation system, development of priority control checklist, and toxicity mechanism analysis

The present study aimed to comprehensively evaluate the toxicological effects of microplastics (MPs) on cultivated soil quality. Based on improved G1 evaluation method, we first constructed a grading evaluation system comprising of the indicators of toxicological effects of cultivated soil quality under MPs exposure, while focusing on types of MPs that had significant/non-significant toxicity effects. Furthermore, we verified reliability of screening results of significance-links at each level, using several data processing methods. Then, using natural breakpoint classification method, a priority control checklist of toxicological effects of 18 types of MPs on cultivated soil was developed to determine the types of MPs having significant toxicity risks and cultivated soil quality links significantly affected by the toxicity of MPs exposure. Finally, quantum-mechanics/molecular-mechanics (QM/MM) methods were used to carry out the differential toxicity mechanism analysis. The results showed that MPs with higher non-polar surface area may lead to stronger toxicity effect to the cultivated soil quality. Notably, the MPs that have abundant binding sites enhance the binding affinity, and less polar MPs bind more strongly to the non-polar amino acids of target receptors. Our study provides a new theoretical perspective for multi-dimensional analysis toxicological effects of different MPs exposure on cultivated soil quality.

Application of Pattern Recognition and Computer Vision Tools to Improve the Morphological Analysis of Microplastic Items in Biological Samples

Since, in many routine analytical laboratories, a stereomicroscope coupled with a digital camera is not equipped with advanced software enabling automatic detection of features of observed objects, in the present study, a procedure of feature detection using open-source software was proposed and validated. Within the framework of applying microscopic expertise coupled with image analysis, a set of digital images of microplastic (MP) items identified in organs of fish was used to determine shape descriptors (such as length, width, item area, etc.). The edge points required to compute shape characteristics were set manually in digital images acquired by the camera coupled with a binocular, and respective values were computed via the use of built-in MotiConnect software. As an alternative, a new approach consisting of digital image thresholding, binarization, the use of connected-component labeling, and the computation of shape descriptors on a pixel level via using the functions available in an OpenCV library or self-written in C++ was proposed. Overall, 74.4% of the images were suitable for thresholding without any additional pretreatment. A significant correlation was obtained between the shape descriptors computed by the software and computed using the proposed approach. The range of correlation coefficients at a very high level of significance, according to the pair of correlated measures, was higher than 0.69. The length of fibers can be satisfactorily approximated using a value of half the length of the outer perimeter (r higher than 0.75). Compactness and circularity significantly differ for particles and fibers.

Sorption of levonorgestrel on polyethylene, polystyrene and polypropylene microplastics

Sorption studies involving microplastics (MPs) are essential to understand the mechanisms implicated in contaminant retention. In this research, a complete study of the sorption behaviour of a hormonal contraceptive -levonorgestrel- in MPs of different composition in two distinct matrices was performed, using high-performance liquid chromatography coupled to a UV detector for the determination of levonorgestrel. Characterization of the studied MPs was achieved by X-ray diffraction and differential scanning calorimetry, and Fourier-transformed infrared spectroscopy. Kinetic and isotherm studies were performed using a batch design under controlled conditions: 500 mg of MPs pellets of 3-5 mm diameter, agitation at 125 rpm, and 30 °C. The comparison of results in ultrapure water and artificial seawater, revealed changes in sorption capacity, and the predominant sorption mechanisms involved. Overall, all studied MPs showed sorption affinity towards levonorgestrel, being low-density polyethylene the one with the highest sorption capacity in ultrapure water and polystyrene in seawater.

Aging of biodegradable-mulch-derived microplastics reduces their sorption capacity of atrazine

Degradable plastics are gradually regarded as alternatives of conventional, synthetic organic polymers to reduce the plastics or microplastics (MPs) pollution; however, the reports upon environmental risk of degradable plastics are still limited. In order to evaluate the potential vector effect of biodegradable MPs on coexisting contaminants, sorption of atrazine onto pristine and ultraviolet-aged (UV) polybutylene adipate co-terephthalate (PBAT) MPs and polybutylene succinate co-terephthalate (PBST) MPs were investigated. The results showed that, UV aging led to more wrinkles and cracks on the surface, increased homogeneous chains proportion, enhanced hydrophobicity, and enlarged crystallinity of both MPs. The sorption kinetics of atrazine to MPs fitted well into pseudo-first-order (R² = 0.809-0.996) and pseudo-second-order (R² = 0.889-0.994) models. In the concentration range of 0.5-25 mg L^-1, the sorption isotherm fitted into linear (R² = 0.967-0.996) and Freundlich model (R² = 0.972-0.997), indicating that the absorption partitioning was the dominant sorption mechanism. The partition coefficient (K_d) of atrazine to PBAT- MPs (40.11-66.01 L kg^-1) was higher than that of PBST- MPs (34.34-57.96 L kg^-1), and the K_d values of both MPs declined for aged MPs. The specific surface area, hydrophobicity, polarity and crystallinity of MPs jointly interpreted the changing sorption capacity of the MPs. In the present study, both aged PBAT- and aged PBST- MPs exhibited lower vector potential to atrazine than pristine MPs, suggesting reduced risk of being a pollutant carrier, which is of great significance for the development of biodegradable plastics.

Reduced adsorption of norfloxacin on UV aging microplastics in anoxic environment

Over recent years, much attention has been paid to aging problem of microplastics and adsorption behavior of antibiotic on microplastics. In this study, four microplastics, including polystyrene (PS), polypropylene (PP), polyamide (PA) and polyethylene (PE), were photoaged by UV light in anoxic environment. The surface characteristics of microplastics and adsorption behavior of norfloxacin (NOR) on microplastics were investigated. Results indicated that the specific surface area and crystallinity increased, and hydrophobicity weakened of microplastics after UV aging. The content of C element decreased and the content of O barely changed in the aged microplastics. In addition, the adsorption of NOR on microplastics yielded a better fitness for the pseudo-second-order kinetics, Langmuir and Freundlich models. The adsorption capacities of NOR on PS, PA, PP, and PE at 288 K were 16.01, 15.12, 14.03, and 13.26 mg·g^-1, respectively, while the adsorption capacities of NOR on aged microplastics were reduced to 14.20, 14.19, 11.50, and 10.36 mg·g^-1, respectively, due to decrease of hydrophobicity and increase of crystallinity of microplastics after UV aging. The adsorption of NOR on microplastics decreased with the increase of temperature, implying the adsorption process was exothermic. Adsorption mechanism analysis showed that Van der Waals force was the main influential mechanism of the adsorption of NOR on PP and PE, and hydrogen bond was the main factor affecting the adsorption of NOR on PA, while the π-π interaction was the main mechanism impacting the adsorption of NOR on PS. Aging time and salinity significantly affect the adsorption of NOR on microplastics. With the increase of humic acid concentration and pH, the adsorption of NOR on microplastics first reduced and then rose. This study provides a basis for further clarifying the mechanism of UV aging microplastics and a reference for the study of combined pollution behavior of microplastics and antibiotics.

Toxicity interaction of polystyrene nanoplastics with sulfamethoxazole on the microalgae Chlamydomonas reinhardtii: A closer look at effect of light availability

The coexistence of nanoplastics and antibiotics in the aquatic environment has raised a complicated risk for ecosystems and human health. How the environmental factors e.g., light, regulate the interaction between nanoplastics and antibiotics and the resulting combined toxicity is poorly understood. Here, we investigated the individual and combined toxicity of polystyrene nanoplastics (nPS, 100 mg L¹) and sulfamethoxazole (SMX, 2.5 and 10 mg L^-1) toward the microalgae Chlamydomonas reinhardtii under low (LL, 16 μmol m^-2·s^-1), normal (NL, 40 μmol m^-2·s^-1), and high light (HL, 150 μmol m^-2·s^-1) in terms of cellular responses. Results indicated that the joint toxicity of nPS and SMX commonly exhibited a strong antagonistic/mitigative effect under LL/NL at 24 h, and under NL at 72 h. nPS could adsorb more SMX under LL/NL at 24 h (1.90/1.33 mg g^-1) and under NL at 72 h (1.01 mg g^-1), thereby alleviating SMX toxicity to C. reinhardtii. However, the self-toxicity of nPS had a negative influence on the degree of antagonism between nPS and SMX. The experimental results coupled with computational chemistry further revealed that the adsorption capacity of SMX on nPS was stimulated by low pH under LL/NL at 24 h (∼7.5), while by less co-existing saline ions (0.83 ppt) and algae-derived dissolved organic matter (9.04 mg L^-1) under NL at 72 h. nPS toxicity that was responsible for the toxic action modes was mainly attributed to the shading effect induced by hetero-aggregation and hindrance of light transmittance (>60%), as well as being regulated by additives leaching (0.49-1.07 mg L^-1) and oxidative stress. Overall, these findings provided a critical basis for the risk assessment and management of multiple pollutants in the complex natural environment.

Adsorption abilities and mechanisms of Lactobacillus on various nanoplastics

As a new type of pollutants, nanoplastics (NPs), which are easily ingested by humans from food wraps, salt, drinking water, have been widely detected in various water environments, and are a threat to human health. It is therefore urgent to develop an efficient method to remove NPs from the diet or relief its harm. In the present study, the possibility of a well-known human probiotic, lactic acid bacteria (LAB), was evaluated to remove NPs from food as an absorbent. The results indicated that LAB from infant feces could efficiently absorb three types NPs, i.e. polypropylene (PP), polyethylene (PE), and polyvinyl chloride (PVC) with the adsorption rates of PP > PE > PVC (PP 78.57%, PE 71.59%, PVC 66.57%) and the Nile red-stained NPs being aggregated on the surfaces of Lactobacillus cells. The smaller the particle size, the stronger the ability of NP adsorption on the cell surface. The hydrophobicity of NPs and bacterial cells affected the adsorption process. The measurement of adsorption rates of different cell components indicated that the overall adsorption effect of cell was better than that of individual cell component. The results of molecular dynamics analysis revealed that adsorption was mainly caused by electrostatic interactions, van der Waals forces, and hydrogen bonds. The hydrophobic interaction was also involved in adsorption process. Overall, this research may provide new information for developing new strategies for NPs removal in intestinal environment.

Adsorption of naphthalene and its derivatives onto high-density polyethylene microplastic: Computational, isotherm, thermodynamic, and kinetic study

Microplastics (MP) have received great attention due to the mass-produced residues discharged into the environment. MP are ideal for adhering to organic pollutants that can be easily dispersed, thus posing risks to human health. Furthermore, little has been reported on how different functional groups in polycyclic aromatic hydrocarbons (PAH) derivatives influence the adsorption behavior on MP. To better understand this process, groups methyl (-CH₃) and hydroxyl (-OH) were selected and commercial and waste high-density polyethylene (HDPE, ≤ 1 mm) were used as adsorbents, and Naphthalene (Nap), 1-Methyl-Naphthalene (Me-Nap) and α-Naphthol as adsorbates. The results showed different behaviors for nonpolar and polar adsorbates. Dispersion forces were the main type of interaction between HDPE and Nap/Me-Nap, while dipole-induced dipole forces and H-bonding were the chief interactions involving MP and polar compounds. Regardless the HDPE source, Nap and Me-Nap have a Type III isotherm, and α-Naphthol presents a Type II isotherm. Nap and Me-Nap fitted to Freundlich isotherm of an unfavorable process (n = 2.12 and 1.11; 1.87 and 1.31, respectively), with positive values of ΔH° (50 and 77.17; 66 and 64.63 kJ mol^-1) and ΔS° (0.070 and 0.0145; 0.122 and 0.103 kJ mol^-1) for commercial and waste MP, respectively. Besides, the adsorption isotherm of α-Naphthol on commercial and waste HDPE fitted to the Langmuir model (Q_max = 42.5 and 27.2 μmol g^-1, respectively), presenting negative values of ΔH° (-43.71 and -44.10 kJ mol^-1) and ΔS° (-0.037 and -0.025 kJ mol^-1). The adsorption kinetic study presents a nonlinear pseudo-second-order model for all cases. The K₂ values follow the order Me-Nap > Nap > α-Naphthol in both MP. Therefore, this experimental study provides new insights into the affinity of PAH derivatives for a specific class of MP, helping to understand the environmental fate of residual MP and organic pollutants.

Accumulation of Plastics and Trace Elements in the Mangrove Forests of Bima City Bay, Indonesia

Pollution with microplastics (MPs), nanoplastics (NPs) and trace elements (TEs) remains a considerable threat for mangrove biomes due to their capability to capture pollutants suspended in the water. This study investigated the abundance and composition of plastics and TEs contained in the soil and pneumatophores of Avicennia alba sampled in experimental areas (hotel, market, river mouth, port, and rural areas) differentiated in anthropopressure, located in Bima Bay, Indonesia. Polymers were extracted and analyzed with the use of a modified sediment isolation method and Fourier transform infrared spectroscopy. Trace elements were detected by inductively coupled plasma optical emission spectrometry. The lowest and highest quantities of MPs in soil were recorded in rural and hotel areas, respectively. The rural site was characterized by distinct MP composition. The amounts of sediment-trapped MPs in the tested localities should be considered as high, and the recognized polymers partly corresponded with local human activity. Concentrations of seven plastic types found in plant tissues did not entirely reflect sediment pollution with nine types, suggesting a selective accumulation (particularly of polyamides and vinylidene chloride) and substance migration from other areas. Very low concentrations of non-biogenic TEs were observed, both in sediments and pneumatophores. The results highlight the relevance of environmental contamination with plastics.

Transport of functional group modified polystyrene nanoplastics in binary metal oxide saturated porous media

Metal oxides exist in porous media in the form of composite metal oxides, which can significantly affect the transport and transformation of pollutants in the soil environment. In this study, binary metal oxide porous media were prepared to explore the effects of solution chemistry, and the presence of binary metal oxides on the transport of functional group modified polystyrene nanoplastics (PSNPs) in saturated porous media. The results show that the existence of binary metal oxides significantly affects the migration ability of PSNPs in saturated porous media. The increase of ionic strength and the presence of multivalent cations affect the transport capacity of PSNPs in porous media. The types of binary metal oxides affect the migration of PSNPs in saturated porous media. The surface roughness and electrostatic interaction are important factors affecting the retention of PSNPs on the surface of binary metal oxide saturated porous media. The surface morphology has a more far-reaching impact. In addition, DLVO theory cannot fully explain the interaction between PSNPs and saturated porous media in the presence of Al3+. This study's results help provide some theoretical support for the migration of microplastics in the soil environment.

Interactions of microplastics and soil pollutants in soil-plant systems

In recent years, increasing studies have been reported on characterization and detection of microplastics (MPs), and their interactions with organic pollutants (OPs) and heavy metals (HMs) in soils. However, a comprehensive review on the characteristics and factors that influence MPs distribution in soils, the sorption characteristics and mechanisms of soil contaminants by MPs, especially the interactions of MPs and their complexes with pollutants in the soil-plant systems remains rarely available at present. This review focuses on the sorption features and mechanisms of pollutants by MPs in soil and discussed the effects of MPs and their complexing with pollutants on soil properties, microbe and plants. The polarity of MPs significantly influenced the sorption of OPs, and different sorption mechanisms are involved for the hydrophobic and hydrophilic OPs. The sorption of OPs on MPs in soils is different from that in water. Aging of MPs can promote the sorption and migration of contaminants. The enhanced effects of biofilm in microplastisphere on the sorption of pollutants by MPs are critical, and interactions of soil environment-MPs-microbe-HMs-antibiotics increase the potential pathogens and larger release of resistance genes. The coexistence of HMs and MPs affected the growth of plants and the uptake of HMs and MPs by the plants. Moreover, the type, dose, shape and particle size of MPs have important influences on their interactions with pollutants and subsequent effects on soil properties, microbial activities and plant growth. This review also pointed out some knowledge gaps and constructive countermeasures to promote future research in this field.