Highly thermostable xylanase of the thermophilic fungus Talaromyces thermophilus: purification and characterization

Engineering of glycoside hydrolase family 7 cellobiohydrolases directed by natural diversity screening

Protein engineering and screening of processive fungal cellobiohydrolases (CBHs) remain challenging due to limited expression hosts, synergy-dependency, and recalcitrant substrates. In particular, glycoside hydrolase family 7 (GH7) CBHs are critically important for the bioeconomy and typically difficult to engineer. Here, we target the discovery of highly active natural GH7 CBHs and engineering of variants with improved activity. Using experimentally assayed activities of genome mined CBHs, we applied sequence and structural alignments to top performers to identify key point mutations linked to improved activity. From ∼1500 known GH7 sequences, an evolutionarily diverse subset of 57 GH7 CBH genes was expressed in Trichoderma reesei and screened using a multiplexed activity screening assay. Ten catalytically enhanced natural variants were identified, produced, purified, and tested for efficacy using industrially relevant conditions and substrates. Three key amino acids in CBHs with performance comparable or superior to Penicillium funiculosum Cel7A were identified and combinatorially engineered into P. funiculosum cel7a, expressed in T. reesei, and assayed on lignocellulosic biomass. The top performer generated using this combined approach of natural diversity genome mining, experimental assays, and computational modeling produced a 41% increase in conversion extent over native P. funiculosum Cel7A, a 55% increase over the current industrial standard T. reesei Cel7A, and 10% improvement over Aspergillus oryzae Cel7C, the best natural GH7 CBH previously identified in our laboratory.

Xylanase Production by Talaromyces amestolkiae Valuing Agroindustrial Byproducts

In general, agroindustrial byproducts can be easily assimilated by several microorganisms due to their composition, which is rich in carbohydrates. Therefore, they could be appropriate for use as raw materials in a sustainable refinery concept, including the production of hydrolytic enzymes with industrial applicability. In this work, xylanase production by the filamentous fungi Talaromyces amestolkiae in submerged culture was evaluated using five agroindustrial byproducts, namely, wheat bran, citrus pulp, rice bran, peanut skin, and peanut shell. Firstly, the aforementioned byproducts were characterized in terms of cellulose, xylan, lignin, and extractives. Next, production studies were performed, and wheat bran generated the highest enzymatic activity (5.4 U·mL⁻¹), probably because of its large amount of xylan. Subsequently, a factorial design was performed to evaluate the independent variables yeast extract, wheat bran, K₂HPO₄, and pH, aiming to improve the variable response, xylanase activity. The condition that promoted the highest production, 13.02 U·mL⁻¹ (141% higher than the initial condition), was 20 g·L⁻¹ wheat bran, 2.5 g·L⁻¹ yeast extract, 3 g·L⁻¹ K₂HPO₄, and pH 7. Thus, industrial byproducts with a high content of xylan can be used as a culture medium to produce xylanase enzymes with a Talaromyces strain through an economical and sustainable approach.

Identification and phylogenetic characterization based on DNA sequences from RNA ribosomal genes of thermophilic microorganisms in a high elevation Andean tropical geothermal spring

Several microorganisms can survive in harsh acid environments in geothermal springs at high temperatures across the Equatorial Andes Mountains. However, little is known about their physiological features and phylogenetic composition. Here we identify thermophilic microorganisms (bacteria, fungi, and microalgae) hosted in an almost unexplored geothermal spring (known as “Aguas Hediondas”). The phylogeny of the cultures was determined by analyzing physiological features and DNA sequences of PCR products for 16S rRNA, ITS, and 23S rRNA genes. Twenty pure cultures were isolated from the samples, including 17 for bacteria, one for cyanobacterium, one for eukaryotic microalgae, and one for fungus. Most bacterial strains were gram-positive, spore-forming, and bacilli (Bacillus). Cyanobacterium strain belonged to Chroococcidiopsis and the eukaryotic microalgae to Chlorophyta. The unique fungal strain isolated was closely related to T. duponti. Through our study, isolated thermophilic bacteria, microalgae and fungi from the “Aguas Hediondas” geothermal spring were characterized and identified. This study represents one of the first extensive molecular characterizations of extremophile microbes in the Tropical Equatorial Andes. Keywords. microbial diversity; DNA markers; extremophiles; phylogenetics

Extremophilic Prokaryotic Endoxylanases: Diversity, Applicability, and Molecular Insights

Extremophilic endoxylanases grabbed attention in recent years due to their applicability under harsh conditions of several industrial processes. Thermophilic, alkaliphilic, and acidophilic endoxylanases found their employability in bio-bleaching of paper pulp, bioconversion of lignocellulosic biomass into xylooligosaccharides, bioethanol production, and improving the nutritious value of bread and other bakery products. Xylanases obtained from extremophilic bacteria and archaea are considered better than fungal sources for several reasons. For example, enzymatic activity under broad pH and temperature range, low molecular weight, cellulase-free activity, and longer stability under extreme conditions of prokaryotic derived xylanases make them a good choice. In addition, a short life span, easy cultivation/harvesting methods, higher yield, and rapid DNA manipulations of bacterial and archaeal cells further reduces the overall cost of the product. This review focuses on the diversity of prokaryotic endoxylanases, their characteristics, and their functional attributes. Besides, the molecular mechanisms of their extreme behavior have also been presented here.

Purification, characterization and partial amino acid sequences of thermo-alkali-stable and mercury ion-tolerant xylanase from Thermomyces dupontii KKU-CLD-E2-3

We investigated the properties of the low molecular weight thermo-alkali-stable and mercury ion-tolerant xylanase production from Thermomyces dupontii KKU-CLD-E2-3. The xylanase was purified to homogeneity by ammonium sulfate, Sephadex G-100 and DEAE-cellulose column chromatography which resulted 27.92-fold purification specific activity of 56.19 U/mg protein and a recovery yield of 2.01%. The purified xylanase showed a molecular weight of 25 kDa by SDS-PAGE and the partial peptide sequence showed maximum sequence homology to the endo-1,4-β-xylanase. The optimum temperature and pH for its activity were 80 °C and pH 9.0, respectively. Furthermore, the purified xylanase can maintain more than 75% of the original activity in pH range of 7.0-10.0 after incubation at 4 °C for 24 h, and can still maintain more than 70% of original activity after incubating at 70 °C for 90 min. Our purified xylanase was activated by Cu2+ and Hg2+ up to 277% and 235% of initial activity, respectively but inhibited by Co2+, Ag+ and SDS at a concentration of 5 mM. The Km and Vmax values of beechwood xylan were 3.38 mg/mL and 625 µmol/min/mg, respectively. Furthermore, our xylanase had activity specifically to xylan-containing substrates and hydrolyzed beechwood xylan, and the end products mainly were xylotetraose and xylobiose. The results suggested that our purified xylanase has potential to use for pulp bleaching in the pulp and paper industry.

A detailed overview of xylanases: an emerging biomolecule for current and future prospective

Xylan is the second most abundant naturally occurring renewable polysaccharide available on earth. It is a complex heteropolysaccharide consisting of different monosaccharides such as l-arabinose, d-galactose, d-mannoses and organic acids such as acetic acid, ferulic acid, glucuronic acid interwoven together with help of glycosidic and ester bonds. The breakdown of xylan is restricted due to its heterogeneous nature and it can be overcome by xylanases which are capable of cleaving the heterogeneous β-1,4-glycoside linkage. Xylanases are abundantly present in nature (e.g., molluscs, insects and microorganisms) and several microorganisms such as bacteria, fungi, yeast, and algae are used extensively for its production. Microbial xylanases show varying substrate specificities and biochemical properties which makes it suitable for various applications in industrial and biotechnological sectors. The suitability of xylanases for its application in food and feed, paper and pulp, textile, pharmaceuticals, and lignocellulosic biorefinery has led to an increase in demand of xylanases globally. The present review gives an insight of using microbial xylanases as an “Emerging Green Tool” along with its current status and future prospective.

Fast flow rate processes for purification of alkaline xylanase isoforms from Bacillus pumilus AJK and their biochemical characterization for industrial application purposes

This study shows the presence of five isozymic forms of alkaline xylanase from Bacillus pumilus using fast flow rate microfiltration, ultrafiltration, Q-sepharose, and phenyl sepharose chromatographic techniques. Polyacrylamide gel electrophoresis, high-performance liquid chromatography, and zymographic studies also revealed the purity of five isoforms of alkaline xylanases. Isoforms-X-I, X-III, and X-V exhibited optimum activity at pH 8.5, whereas X-II, X-IV showed maximum activity at pH 9. All isoforms were optimally active at temperature 55°C. Isoforms were found to be stable at pH 7-11, showed 92-100% residual activity after 3 hr, treatment time for most industrial applications. The isoforms retained nearly 80-86% residual activity after incubating at 45°C for 3 hr. Molecular weights of xylanase I-V, were 13.1, 15.3, 18.4, 20.1, and 21.0 kDa, respectively. Mg²⁺ ions were found to be potent activator for all isozymic forms. The Km and Vmax values of X-I, X-II, X-III, X-IV, and X-V were 6.71, 6.66, 7.14, 5.88, 6.25 mg/ml and 2,000, 1,695, 1,666.66, 1,428.57, and 1,408.45 IU/mg protein, respectively. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed the monomeric nature of all isoforms. The low-molecular masses, significantly enhanced activity in the presence of industrially suitable-low cost activator, better stability of all isoforms at pH 7-11 and at higher temperature, also presence of multiple forms of alkaline xylanase, makes this enzyme suitable for textile-paper industries. This is also the first report mentioning the purification of five isozymic forms of alkaline xylanase using fast flow rate techniques.

Characterization and improvement of substrate-binding affinity of D-aspartate oxidase of the thermophilic fungus Thermomyces dupontii

D-Aspartate oxidase (DDO) is a valuable enzyme that can be utilized in the determination of acidic D-amino acids and the optical resolution of a racemic mixture of acidic amino acids, which require its higher stability, higher catalytic activity, and higher substrate-binding affinity. In the present study, we identified DDO gene (TdDDO) of a thermophilic fungus, Thermomyces dupontii, and characterized the recombinant enzyme expressed in Escherichia coli. In addition, we generated a variant that has a higher substrate-binding affinity. The recombinant TdDDO expressed in E. coli exhibited oxidase activity toward acidic D-amino acids and a neutral D-amino acid, D-Gln, with the highest activity toward D-Glu. The K_m and k_cat values for D-Glu were 2.16 mM and 217 s^-1, respectively. The enzyme had an optimum pH and temperature 8.0 and 60 °C, respectively, and was stable between pH 5.0 and 10.0, with a T₅₀ of ca. 51 °C, which was much higher than that in DDOs from other origins. Enzyme stability decreased following a decrease in protein concentration, and externally added FAD could not repress the destabilization. The mutation of Phe248, potentially located in the active site of TdDDO, to Tyr residue, conserved in DDOs and D-amino acid oxidases, markedly increased substrate-binding affinity. The results showed the great potential of TdDDO and the variant for practical applications.

Talaromyces borbonicus, sp. nov., a novel fungus from biodegraded Arundo donax with potential abilities in lignocellulose conversion

A novel fungal species able to synthesize enzymes with potential synergistic actions in lignocellulose conversion was isolated from the biomass of Arundo donax during biodegradation under natural conditions in the Gussone Park of the Royal Palace of Portici (Naples, Italy). In this work, this species was subjected to morphological and phylogenetic analyses. Sequencing of its genome was performed, resulting in 28 scaffolds that were assembled into 27.05 Mb containing 9744 predicted genes, among which 396 belong to carbohydrate-active enzyme (CAZyme)-encoding genes. Here we describe and illustrate this previously unknown species, which was named Talaromyces borbonicus, by a polyphasic approach combining phenotypic, physiological, and sequence data.

Optimization of pectinase immobilization on grafted alginate-agar gel beads by 24 full factorial CCD and thermodynamic profiling for evaluating of operational covalent immobilization

Pectinase produced by a honey derived from the fungus Aspergillus awamori KX943614 was covalently immobilized onto gel beads made of alginate and agar. Polyethyleneimine, glutaraldehyde, loading time and enzyme's units were optimized by 2⁴ full factorial central composite design (CCD). The immobilization process increased the optimal working pH for the free pectinase from 5 to a broader range of pH4.5-5.5 and the optimum operational temperature from 55°C to a higher temperature, of 60°C, which is favored to reduce the enzyme's microbial contamination. The thermodynamics studies showed a thermal stability enhancement against high temperature for the immobilized formula. Moreover, an increase in half-lives and D-values was achieved. The thermodynamic studies proved that immobilization of pectinase made a remarkable increase in enthalpy and free energy because of enzyme stability enhancement. The reusability test revealed that 60% of pectinase's original activity was retained after 8 successive cycles. This gel formula may be convenient for immobilization of other industrial enzymes.

Taxonomic identification of the thermotolerant and fast-growing fungus Lichtheimia ramosa H71D and biochemical characterization of the thermophilic xylanase LrXynA

The zygomycete fungus Lichtheimia ramosa H71D, isolated from sugarcane bagasse compost, was identified by applying phylogenetic analysis based on the DNA sequence of the Internal Transcribed Spacer (ITS), and subsequent secondary structure analysis of ITS2. L. ramosa H71D was able to grow over a wide range of temperatures (25–45 °C), manifesting optimal growth at 37 °C. A 64 kDa xylanase (named LrXynA) was purified from the culture supernatant of L. ramosa H71D grown on 2% carboxymethylcellulose (CMC), as the only carbon source. LrXynA displayed optimal activity at pH 6 and temperature of 65 °C. The enzyme retained more than 50% of its maximal activity over a broad range of pH values (4.5–7.5). Enzyme half-life (t_½) times at 55, 65 and 75 °C were 80, 25, and 8 min, respectively. LrXynA showed higher affinity (k_M of 2.87 mg/mL) and catalytic efficiency (k_cat/k_M of 0.651 mg s/mL) towards Beechwood xylan in comparison to other substrates such as Birchwood xylan, Oat-spelt xylan, CMC, Avicel and Solka floc. The predominant final products from LrXynA-mediated hydrolysis of Beechwood xylan were xylobiose and xylotriose, suggesting that the enzyme is an endo-β-1,4 xylanase. Scanning electron microscopy (SEM) imaging of sugar cane bagasse (SCB) treated with LrXynA, alone or in combination with commercial cellulases, showed a positive effect on the hydrolysis of SCB. To our knowledge, this is the first report focusing on the biochemical and functional characterization of an endo-β-1,4 xylanase from the thermotolerant and fast-growing fungus Lichtheimia ramosa.

Biochemical properties of a new thermo- and solvent-stable xylanase recovered using three phase partitioning from the extract of Bacillus oceanisediminis strain SJ3

The present study investigates the production and partial biochemical characterization of an extracellular thermostable xylanase from the Bacillus oceanisediminis strain SJ3 newly recovered from Algerian soil using three phase partitioning (TPP). The maximum xylanase activity recorded after 2 days of incubation at 37 °C was 20.24 U/ml in the presence of oat spelt xylan. The results indicated that the enzyme recovered in the middle phase of TPP system using the optimum parameters were determined as 50% ammonium sulfate saturation with 1.0:1.5 ratio of crude extract: t-butanol at pH and temperature of 8.0 and 10 °C, respectively. The xylanase was recovered with 3.48 purification fold and 107% activity recovery. The enzyme was optimally active at pH 7.0 and was stable over a broad pH range of 5.0–10. The optimum temperature for xylanase activity was 55 °C and the half-life time at this temperature was of 6 h. At this time point the enzyme retained 50% of its activity after incubation for 2 h at 95 °C. The crude enzyme resist to sodium dodecyl sulfate and β-mercaptoethanol, while all the tested ions do not affect the activity of the enzyme. The recovered enzyme is, at least, stable in tested organic solvents except in propanol where a reduction of 46.5% was observed. Further, the stability of the xylanase was higher in hydrophobic solvents where a maximum stability was observed with cyclohexane. These properties make this enzyme to be highly thermostable and may be suggested as a potential candidate for application in some industrial processes. To the best of our knowledge, this is the first report of xylanase activity and recoverey using three phase partitioning from B. oceanisediminis.

The thermophilic biomass-degrading fungus Thielavia terrestris Co3Bag1 produces a hyperthermophilic and thermostable β-1,4-xylanase with exo- and endo-activity

A hyperthermophilic and thermostable xylanase of 82 kDa (TtXynA) was purified from the culture supernatant of T. terrestris Co3Bag1, grown on carboxymethyl cellulose (CMC), and characterized biochemically. TtXynA showed optimal xylanolytic activity at pH 5.5 and at 85 °C, and retained more than 90% of its activity at a broad pH range (4.5-10). The enzyme is highly thermostable with a half-life of 23.1 days at 65 °C, and active in the presence of several metal ions. Circular dichroism spectra strongly suggest the enzyme gains secondary structures when temperature increases. TtXynA displayed higher substrate affinity and higher catalytic efficiency towards beechwood xylan than towards birchwood xylan, oat-spelt xylan, and CMC. According to its final hydrolysis products, TtXynA displays endo-/exo-activity, yielded xylobiose, an unknown oligosaccharide containing about five residues of xylose and a small amount of xylose on beechwood xylan. Finally, this report represents the description of the first fungal hyperthermophilic xylanase which is produced by T. terrestris Co3Bag1. Since TtXynA displays relevant biochemical properties, it may be a suitable candidate for biotechnological applications carried out at high temperatures, like the enzymatic pretreatment of plant biomass for the production of bioethanol.

Characterization of a purified thermostable xylanase from Caldicoprobacter algeriensis sp. nov. strain TH7C1(T)

The present study investigates the purification and biochemical characterization of an extracellular thermostable xylanase (called XYN35) from Caldicoprobacter algeriensis sp. nov., strain TH7C1(T), a thermophilic, anaerobic strain isolated from the hydrothermal hot spring of Guelma (Algeria). The maximum xylanase activity recorded after 24 h of incubation at 70 °C and in an optimized medium containing 10 g/L mix birchwood- and oats spelt-xylan was 250 U/mL. The pure protein was obtained after heat treatment (1 h at 70 °C), followed by sequential column chromatographies on Sephacryl S-200 gel filtration and Mono-S Sepharose anion-exchange. Matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF/MS) analysis indicated that the purified enzyme is a monomer with a molecular mass of 35,075.10 Da. The results from amino-acid sequence analysis revealed high homology between the 21 NH2-terminal residues of XYN35 and those of bacterial xylanases. The enzyme showed optimum activity at pH 11 and 70 °C. While XYN35 was activated by Ca(2+), Mn(2+), and Mg(2+), it was completely inhibited by Hg(2+) and Cd(2+). The xylanase showed higher specific activity on soluble oat-spelt xylan, followed by beechwood xylan. This enzyme was also noted to obey the Michaelis-Menten kinetics, with Km and kcat values on oat-spelt xylan being 1.33 mg/mL and 400 min(-1), respectively. Thin-layer chromatography soluble oat-spelt xylan (TLC) analysis showed that the final hydrolyzed products of the enzyme from birchwood xylan were xylose, xylobiose, and xylotriose. Taken together, the results indicated that the XYN35 enzyme has a number of attractive biochemical properties that make it a potential promising candidate for future application in the pulp bleaching industry.

Modification in the properties of paper by using cellulase-free xylanase produced from alkalophilic Cellulosimicrobium cellulans CKMX1 in biobleaching of wheat straw pulp

Alkalophilic Cellulosimicrobium cellulans CKMX1 isolated from mushroom compost is an actinomycete that produces industrially important and environmentally safer thermostable cellulase-free xylanase, which is used in the pulp and paper industry as an alternative to the use of toxic chlorinated compounds. Strain CKMX1 was previously characterized by metabolic fingerprinting, whole-cell fatty acids methyl ester analysis, and 16S rDNA and was found to be C. cellulans CKMX1. Crude enzyme (1027.65 U/g DBP) produced by C. cellulans CKMX1, having pH and temperature optima of 8.0 and 60 °C, respectively, in solid state fermentation of apple pomace, was used in the production of bleached wheat straw pulp. Pretreatment with xylanase at a dose of 5 U/g after pulping decreased pulp kappa points by 1.4 as compared with the control. Prebleaching with a xylanase dose of 5 U/g pulp reduced the chlorine charge by 12.5%, increased the final brightness points by approximately 1.42% ISO, and improved the pulp strength properties. Xylanase could be substituted for alkali extraction in C–Ep–D sequence and used for treating chemically bleached pulp, resulting in bleached pulp with higher strength properties. Modification of bleached pulp with 5 U of enzyme/g increased pulp whiteness and breaking length by 1.03% and 60 m, respectively; decreased tear factor of pulp by 7.29%; increased bulk weight by 3.99%, as compared with the original pulp. Reducing sugars and UV-absorbing lignin-derived compound values were considerably higher in xylanase-treated samples. Cellulosimicrobium cellulans CKMX1 has a potential application in the pulp and paper industries.

A novel thermostable xylanase GH10 from Malbranchea pulchella expressed in Aspergillus nidulans with potential applications in biotechnology

BACKGROUND

The search for novel thermostable xylanases for industrial use has intensified in recent years, and thermophilic fungi are a promising source of useful enzymes. The present work reports the heterologous expression and biochemical characterization of a novel thermostable xylanase (GH10) from the thermophilic fungus Malbranchea pulchella, the influence of glycosylation on its stability, and a potential application in sugarcane bagasse hydrolysis.

RESULTS

Xylanase MpXyn10A was overexpressed in Aspergillus nidulans and was active against birchwood xylan, presenting an optimum activity at pH 5.8 and 80°C. MpXyn10A was 16% glycosylated and thermostable, preserving 85% activity after 24 hours at 65°C, and deglycosylation did not affect thermostability. Circular dichroism confirmed the high alpha-helical content consistent with the canonical GH10 family (β/α)8 barrel fold observed in molecular modeling. Primary structure analysis revealed the existence of eight cysteine residues which could be involved in four disulfide bonds, and this could explain the high thermostability of this enzyme even in the deglycosylated form. MpXyn10A showed promising results in biomass degradation, increasing the amount of reducing sugars in bagasse in natura and in three pretreated sugarcane bagasses.

CONCLUSIONS

MpXyn10A was successfully secreted in Aspergillus nidulans, and a potential use for sugarcane bagasse biomass degradation was demonstrated.

GH52 xylosidase from Geobacillus stearothermophilus: characterization and introduction of xylanase activity by site‑directed mutagenesis of Tyr509

A xylosidase gene, gsxyn, was cloned from the deep-sea thermophilic Geobacillus stearothermophilus, which consisted of 2,118 bp and encoded a protein of 705 amino acids with a calculated molecular mass of 79.8 kDa. The GSxyn of glycoside hydrolase family 52 (GH52) displayed its maximum activity at 70 °C and pH 5.5. The K m and k cat values of GSxyn for ρNPX were 0.48 mM and 36.64 s−1, respectively. Interestingly, a new exo-xylanase activity was introduced into GSxyn by mutating the tyrosine509 into glutamic acid, whereas the resultant enzyme variant, Y509E, retained the xylosidase activity. The optimum xylanase activity of theY509E mutant displayed at pH 6.5 and 50 °C, and retained approximately 45 % of its maximal activity at 55 °C, pH 6.5 for 60 min. The K m and k cat values of the xylanase activity of Y509E mutant for beechwood xylan were 5.10 mg/ml and 22.53 s−1, respectively. The optimum xylosidase activity of theY509E mutant displayed at pH 5.5 and 60 °C. The K m and k cat values of the xylosidase activity of Y509E mutant for ρNPX were 0.51 mM and 22.53 s−1, respectively. This report demonstrated that GH52 xylosidase has provided a platform for generating bifunctional enzymes for industrially significant and complex substrates, such as plant cell wall.

Production, purification, and characterization of a major Penicillium glabrum xylanase using Brewer's spent grain as substrate

In recent decades, xylanases have been used in many processing industries. This study describes the xylanase production by Penicillium glabrum using brewer's spent grain as substrate. Additionally, this is the first work that reports the purification and characterization of a xylanase using this agroindustrial waste. Optimal production was obtained when P. glabrum was grown in liquid medium in pH 5.5, at 25 °C, under stationary condition for six days. The xylanase from P. glabrum was purified to homogeneity by a rapid and inexpensive procedure, using ammonium sulfate fractionation and molecular exclusion chromatography. SDS-PAGE analysis revealed one band with estimated molecular mass of 18.36 kDa. The optimum activity was observed at 60 °C, in pH 3.0. The enzyme was very stable at 50 °C, and high pH stability was verified from pH 2.5 to 5.0. The ion Mn(2+) and the reducing agents β -mercaptoethanol and DTT enhanced xylanase activity, while the ions Hg(2+), Zn(2+), and Cu(2+) as well as the detergent SDS were strong inhibitors of the enzyme. The use of brewer's spent grain as substrate for xylanase production cannot only add value and decrease the amount of this waste but also reduce the xylanase production cost.

Cloning, expression and characteristics of a novel alkalistable and thermostable xylanase encoding gene (Mxyl) retrieved from compost-soil metagenome

Background

The alkalistable and thermostable xylanases are in high demand for pulp bleaching in paper industry and generating xylooligosaccharides by hydrolyzing xylan component of agro-residues. The compost-soil samples, one of the hot environments, are expected to be a rich source of microbes with thermostable enzymes.

Methodology/Principal Findings

Metagenomic DNA from hot environmental samples could be a rich source of novel biocatalysts. While screening metagenomic library constructed from DNA extracted from the compost-soil in the p18GFP vector, a clone (TSDV-MX1) was detected that exhibited clear zone of xylan hydrolysis on RBB xylan plate. The sequencing of 6.321 kb DNA insert and its BLAST analysis detected the presence of xylanase gene that comprised 1077 bp. The deduced protein sequence (358 amino acids) displayed homology with glycosyl hydrolase (GH) family 11 xylanases. The gene was subcloned into pET28a vector and expressed in E. coli BL21 (DE3). The recombinant xylanase (rMxyl) exhibited activity over a broad range of pH and temperature with optima at pH 9.0 and 80°C. The recombinant xylanase is highly thermostable having T1/2 of 2 h at 80°C and 15 min at 90°C.

Conclusion/Significance

This is the first report on the retrieval of xylanase gene through metagenomic approach that encodes an enzyme with alkalistability and thermostability. The recombinant xylanase has a potential application in paper and pulp industry in pulp bleaching and generating xylooligosaccharides from the abundantly available agro-residues.

Improved lignocellulose conversion to biofuels with thermophilic bacteria and thermostable enzymes

Second-generation feedstock, especially nonfood lignocellulosic biomass is a potential source for biofuel production. Cost-intensive physical, chemical, biological pretreatment operations and slow enzymatic hydrolysis make the overall process of lignocellulosic conversion into biofuels less economical than available fossil fuels. Lignocellulose conversions carried out at ≤ 50 °C have several limitations. Therefore, this review focuses on the importance of thermophilic bacteria and thermostable enzymes to overcome the limitations of existing lignocellulosic biomass conversion processes. The influence of high temperatures on various existing lignocellulose conversion processes and those that are under development, including separate hydrolysis and fermentation, simultaneous saccharification and fermentation, and extremophilic consolidated bioprocess are also discussed.

Efficient plant biomass degradation by thermophilic fungus Myceliophthora heterothallica

Rapid and efficient enzymatic degradation of plant biomass into fermentable sugars is a major challenge for the sustainable production of biochemicals and biofuels. Enzymes that are more thermostable (up to 70°C) use shorter reaction times for the complete saccharification of plant polysaccharides compared to hydrolytic enzymes of mesophilic fungi such as Trichoderma and Aspergillus species. The genus Myceliophthora contains four thermophilic fungi producing industrially relevant thermostable enzymes. Within this genus, isolates belonging to M. heterothallica were recently separated from the well-described species M. thermophila. We evaluate here the potential of M. heterothallica isolates to produce efficient enzyme mixtures for biomass degradation. Compared to the other thermophilic Myceliophthora species, isolates belonging to M. heterothallica and M. thermophila grew faster on pretreated spruce, wheat straw, and giant reed. According to their protein profiles and in vitro assays after growth on wheat straw, (hemi-)cellulolytic activities differed strongly between M. thermophila and M. heterothallica isolates. Compared to M. thermophila, M. heterothallica isolates were better in releasing sugars from mildly pretreated wheat straw (with 5% HCl) with a high content of xylan. The high levels of residual xylobiose revealed that enzyme mixtures of Myceliophthora species lack sufficient β-xylosidase activity. Sexual crossing of two M. heterothallica showed that progenies had a large genetic and physiological diversity. In the future, this will allow further improvement of the plant biomass-degrading enzyme mixtures of M. heterothallica.

Biochemical analysis of a highly specific, pH stable xylanase gene identified from a bovine rumen-derived metagenomic library

A metagenomic library was generated using microbial DNA extracted from the rumen contents of a grass hay-fed dairy cow using a bacterial artificial chromosome-based vector system. Functional screening of the library identified a gene encoding a potent glycoside hydrolase, xyn10N18, localised within a xylanolytic gene cluster consisting of four open-reading frames (ORFs). The ORF, xyn10N18, encodes an endo-β-1,4-xylanase with a glycosyl hydrolase family 10 (GH10) catalytic domain, adopts a canonical α8/ß8-fold and possesses conserved catalytic glutamate residues typical of GH10 xylanases. Xyn10N18 exhibits optimal catalytic activity at 35 °C and pH 6.5 and was highly stable to pH changes retaining at least 85 % relative catalytic activity over a broad pH range (4.0-12.0). It retained 25 % of its relative activity at both low (4 °C) and high (55 °C) temperatures, however the stability of the enzyme rapidly decreased at temperatures of >40 °C. The specific activity of Xyn10N18 is enhanced by the divalent cations Mn(2+) and Co(2+) and is dramatically reduced by Hg(2+) and Cu(2+). Interestingly, EDTA had little effect on specific activity indicating that divalent cations do not function mechanistically. The enzyme was highly specific for xylan containing substrates and showed no catalytic activity against cellulose. Analysis of the hydrolysis products indicated that Xyn10N18 was an endoxylanase. Through a combination of structural modelling and in vitro enzyme characterisation this study provides an understanding of the mechanism and the substrate specificity of this enzyme serving as a starting point for directed evolution of Xyn10N18 and subsequent downstream use in industry.

[Isolation and characterization of an alkaline xylanasefrom a newly isolated Bacillus sp. QH14]

Twenty-fivealkaline xylanase producing strains were isolated from Qinghai Lake side soil samples. Among these strains, QH14 produced 648.79 U/mLxylanase, and the enzymatic specific activity was 1148.56 U/mg after purification. This alkaline xylanase producing strain belongs to genus Bacillus based on16S rDNA sequencing analysis and then was designated as Bacillus sp. QH14. The alkalinexylanaseencoding gene, XynQH14, was cloned from Bacillus sp. QH14 and expressed in Escherichiacoli BL21 (DE3). The specific activity of the recombinant xylanase XynQH14 was 700.47 Umg-1 after purification by Ni-NTA affinity chromatography. The optimal temperature and pH of XynQH14 were 60℃ and pH9.2, respectively. Its activity was 50% of initial activity after incubation at 55 ℃ for 1h, 80% at pH7-11 at 37 ℃ for 24 h, and 31.02% at pH11 at 50℃ after 24 h, indicating that XynQH14 isthermostable and alkali-stable. These properties ofXynQH14 suggest its favorable potential applications in pulp and paper industries.

Purification and biochemical characterization of a highly thermostable xylanase from Actinomadura sp. strain Cpt20 isolated from poultry compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption-ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5-10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis-Menten kinetics, with the K (m) and k (cat) values being 1.55 mg soluble oat-spelt xylan/ml and 388 min(-1), respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn(2+), Ca(2+), and Cu(2+), it was, strongly inhibited by Hg(2+), Zn(2+), and Ba(2+). These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.

Studies on an alkali-thermostable xylanase from Aspergillus fumigatus MA28

An alkalitolerant fungus, Aspergillus fumigatus strain MA28 produced significant amounts of cellulase-free xylanase when grown on a variety of agro-wastes. Wheat bran as the sole carbon source supported higher xylanase production (8,450 U/L) than xylan (7,500 U/L). Soybean meal was observed to be the best nitrogen source for xylanase production (9,000 U/L). Optimum medium pH for xylanase production was 8 (9,800 U/L), though, significant quantities of the enzyme was also produced at pH 7 (8,500 U/L), 9 (8,200 U/L) and 10 (4,600 U/L). The xylanase was purified by ammonium sulphate precipitation and carboxymethyl cellulose chromatography, and was found to have a molecular weight of 14.4 kDa with a V(max) of 980 μmol/min/mg of protein and a K(m) of approximately 4.9 mg/mL. The optimum temperature and pH for enzyme activity was 50 °C and pH 8, respectively. However, the enzyme also showed substantial residual activity at 60-70 °C (53-75%) and at alkaline pH 8-9 (56-88%).

Alkalistable endo-β-1,4-xylanase production from a newly isolated alkalitolerant Penicillium sp. SS1 using agro-residues

Thermostable and alkalitolerant xylanases have got intense research focus due to their vast applications in various industries including pulp and paper, food, feed, textile, biofuel, etc. In the present investigation, a Penicillum sp. SS1 isolated from degrading woody material was found to produce moderately thermoactive and alkalistable endo-β-1,4-xylanase (xylanase). Maximum xylanase production was observed after fourth day of fermentation (43.84 IU/ml). The organism produced substantial quantities of xylanase using agricultural residues like wheat bran (20.6 IU/ml), rice bran (21.8 IU/ml) and sawdust (10.7 IU/ml) as carbon sources. The enzyme preparation was totally free of filter paper activity (FPase) and possessed negligible carboxymethyl cellulase (CMCase) activity; this could be an important feature of enzyme if the intended application of enzyme is in pulp and paper industries. Among nitrogen sources examined, yeast extract supported maximum xylanase production (45.74 IU/ml), and was followed by soybean meal (22.2 IU/ml) and ammonium sulphate (20 IU/ml). Maximum xylanase production was observed at initial medium pH 9 (25.6 IU/ml); however, at pH 8 and 10 also significantly high enzyme titre was observed (24 and 21.2 IU/ml, respectively). Thus, Penicillium sp. SS1 displayed capability of growing and producing xylanase at high alkaline pH (8-10). Maximum xylanase activity was reported at 50 °C, however, significantly high activity was observed at 60 °C (65.4%), however, at 70-80 °C activity was lost considerably. At 50-60 °C the enzyme retained very high activity up to 30-60 min (91-100%), however, prolonged incubation (90 min) caused considerable activity reduction (residual activity 63-68%).

Highly thermostable xylanase purified from Rhizomucor miehei NRL 3169

A thermostable xylanase was purified and characterized from the thermophilic fungus Rhizomucor miehei (Cooney & Emerson) Schipper. The enzyme was purified to homogeneity by ammonium sulfate precipitation, sephadex G-100 gel filtration and diethylaminoethyl cellulose anion exchange chromatography with a 29.1-fold. The enzyme was highly active within a range of pH from 5.0 to 6.5. The optimum temperature of the purified enzyme was 75°C. The enzyme showed high thermal stability at 70°C and 75°C and the half-life of the xylanase at 90°C was 30 min. Km and Vmax values at 50°C of the purified enzyme were 0.055 mg/ml and 113.5 μmol min⁻¹ mg⁻¹ respectively. The enzyme was activated by Ca²+, Cu²+, K+ and Na+. On the other hand, Ag²+, Hg²+, Ba²+, and Zn²+ inhibited the enzyme. The molecular weight of the xylanase was estimated to be 27 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The present study is among the first works to examine and describe a secreted highly thermostable endoxylanase from the Rhizomucor miehei fungus. This enzyme displays a number of biochemical properties that make it a potentially strong candidate for industrial and commercial application in pulp bleaching.

Purification and characterization of two thermostable xylanases from Malbranchea flava active under alkaline conditions

Two xylanases, MFX I and MFX II, from the thermophilic fungus Malbranchea flava MTCC 4889 with molecular masses of 25.2 and 30kDa and pIs of 4.5 and 3.7, respectively were purified to homogeneity. The xylanases were optimally active at pH 9.0 and at 60 degrees C, exhibited a half-life of 4h at 60 degrees C, and showed distinct mode of action and product profiles when applied to birchwood, oat spelt, and larchwood xylan, and to wheat and rye arabinoxylan. The xylanases were most active on larchwood xylan with K(m) values of 1.25 and 3.7mg/ml. K(cat)/K(m) values suggested that the xylanases preferentially hydrolyzed rye arabinoxylan. LC-MS/MS (liquid chromatography/mass spectrometry) analysis of tryptic digests of MFX I and MFX II revealed similarity with known fungal xylanases and suggests that that they belonged to the GH 11 and 10 glycosyl hydrolase super families, respectively. These xylanases can potentially be used in enzyme-assisted bleaching of the pulp derived from agro-residues, as well as production of xylooligosaccharides for pre-biotic functional food applications.

Thermostable enzymes as biocatalysts in the biofuel industry

Lignocellulose is the most abundant carbohydrate source in nature and represents an ideal renewable energy source. Thermostable enzymes that hydrolyze lignocellulose to its component sugars have significant advantages for improving the conversion rate of biomass over their mesophilic counterparts. We review here the recent literature on the development and use of thermostable enzymes for the depolymerization of lignocellulosic feedstocks for biofuel production. Furthermore, we discuss the protein structure, mechanisms of thermostability, and specific strategies that can be used to improve the thermal stability of lignocellulosic biocatalysts.

A thermophilic and acid stable family-10 xylanase from the acidophilic fungus Bispora sp. MEY-1

A complete gene, xyl10C, encoding a thermophilic endo-1,4-beta-xylanase (XYL10C), was cloned from the acidophilic fungus Bispora sp. MEY-1 and expressed in Pichia pastoris. XYL10C shares highest nucleotide and amino acid sequence identities of 57.3 and 49.7%, respectively, with a putative xylanase from Aspergillus fumigatus Af293 of glycoside hydrolase family 10. A high expression level in P. pastoris (73,400 U ml(-1)) was achieved in a 3.7-l fermenter. The purified recombinant XYL10C was thermophilic, exhibiting maximum activity at 85 degrees C, which is higher than that reported from any fungal xylanase. The enzyme was also highly thermostable, exhibiting approximately 100% of the initial activity after incubation at 80 degrees C for 60 min and >87% of activity at 90 degrees C for 10 min. The half lives of XYL10C at 80 and 85 degrees C were approximately 45 and 3 h, respectively. It had two activity peaks at pH 3.0 and 4.5-5.0 (maximum), respectively, and was very acid stable, retaining more than 80% activity after incubation at pH 1.5-6.0 for 1 h. The enzyme was resistant to Co(2+), Mn(2+), Cr(3+) and Ag(+). The specific activity of XYL10C for oat spelt xylan was 18,831 U mg(-1). It also had wide substrate specificity and produced simple products (65.1% xylose, 25.0% xylobiose and 9.9% xylan polymer) from oat spelt xylan.