Methods of Chemical Synthesis in the Synthesis of Nanomaterial and Nanoparticles by the Chemical Deposition Method: A Review

Molecular docking insights: interaction mechanisms of green-synthesized iron oxide nanoparticles with bacterial proteins

PURPOSE

This work investigates the environmentally friendly manufacture of iron oxide Nanoparticles (Fe2O3 NPs) by employing leaf extract from Morinda citrifolia (noni) as a stabilizing and reducing agent. A range of characterization methods were used to examine the chemical, structural, and morphological characteristics of the produced Nanoparticles.

METHODS

Gas chromatography-mass spectrometry (GC-MS), scanning electron microscopy (SEM), UV-Vis spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Several bioactive components that contribute to the antibacterial properties of Morinda citrifolia leaf extract were discovered by GC-MS analysis. Evaluations were conducted on the antibacterial, antioxidant, and protein-denaturing properties of the synthesized Fe2O3 NPs. Antioxidant tests, such as phosphomolybdenum and DPPH, demonstrated strong free radical scavenging activity that varied with concentration. With the use of zone of inhibition (ZOI) and minimum inhibitory concentration (MIC) experiments, antibacterial efficiency was shown against both Gram-positive and Gram-negative bacteria.

RESULTS

Fe2O3 NPs were shown to have strong binding affinities with TasA exopolysaccharide (5OF1), outer membrane lipoprotein (1EQ7), and penicillin-binding protein (4WEJ) in a molecular docking analysis that examined their interactions with bacterial proteins. According to the docking data, Fe2O3 NPs may have an antibacterial mechanism that involves interfering with bacterial adhesion, biofilm development, and cell wall production. Their promise for biological and environmental uses was supported by toxicity assessments that showed little harm, including phytotoxicity (seed germination assay) and cytotoxicity (Allium parvum root tip mitotic division research). Overall, this work demonstrates the promise of Fe2O3 NPs as sustainable nanomaterials for medicinal and environmental applications by highlighting their antibacterial, antioxidant, and low-toxicity qualities.

Role of Endophytic Fungi in the Biosynthesis of Metal Nanoparticles and Their Potential as Nanomedicines

Metal nanoparticles (MNPs) produced through biosynthesis approaches have shown favourable physical, chemical, and antimicrobial characteristics. The significance of biological agents in the synthesis of MNPs has been acknowledged as a promising alternative to conventional approaches such as physical and chemical methods, which are confronted with certain challenges. To meet these challenges, the use of endophytic fungi as nano-factories for the synthesis of MNPs has become increasingly popular worldwide in recent times. This review provides an overview of the synthesis of MNPs using endophytic fungi, the mechanisms involved, and their important biomedical applications. A special focus on different biomedical applications of MNPs mediated endophytic fungi involved their antibacterial, antifungal, antiviral, and anticancer applications and their potential as drug delivery agents. Furthermore, this review highlights the significance of the use of endophytic fungi for the green synthesis of MNPs and discusses the benefits, challenges, and prospects in this field.

Carbon Texture Formation on the Surface of Titanium Alloy Grade 5 (Ti-6Al-4V) During Finishing with Abrasive Films

This research explored the formation and effects of carbon layers on Grade 5 titanium alloy (Ti-6Al-4V) surfaces during a microfinishing process using both traditional abrasive films and graphite-coated abrasive films. The study tried to appraise the effect of using graphite-coated films in the microfinishing process concerning surface roughness. Microfinishing with an abrasive film impregnated with diamond particles and an additional coating of graphite was performed to minimize surface roughness and enhance the overall performance of the surface. As a result, it was shown that after processing, the uniform carbon texture formed by the graphite-coated film significantly improved the lubricating and thermal properties. Energy dispersive spectroscopy (EDS) analysis confirmed the homogeneity of carbon distribution over the whole treated surface. Moreover, the graphite-coated films enabled us to obtain smoother surfaces with improved tribological properties. The study therefore concluded that the inclusion of graphite in the abrasive films is necessary for effecting surface modification in light of considerable improvements in surface quality and performance, especially where the wear needs to be reduced and the integrity of the surface maximized.

Progress of Nanomaterials Based on Manganese Dioxide in the Field of Tumor Diagnosis and Therapy

As a pivotal transition metal oxide, manganese dioxide (MnO2) has garnered significant attention owing to its abundant reserves, diverse crystal structures and exceptional performance. Nanosizing MnO2 results in smaller particle sizes, larger specific surface areas, optimized material characteristics, and expanded application possibilities. With the burgeoning research efforts in this field, MnO2 has emerged as a promising nanomaterial for tumor diagnosis and therapy. The distinctive properties of MnO2 in regulating the tumor microenvironment (TME) have attracted considerable interest, leading to a rapid growth in research on MnO2-based nanomaterials for tumor diagnosis and treatment. Additionally, MnO2 nanomaterials are also gradually showing up in the regulation of chronic inflammatory diseases. In this review, we mainly summarized the recent advancements in various MnO2 nanomaterials for tumor diagnosis and therapy. Furthermore, we discuss the current challenges and future directions in the development of MnO2 nanomaterials, while also envisaging their potential for clinical translation.

ZnO Nanoparticles Enhance the Antimicrobial Properties of Two-Sided-Coated Cotton Textile

Cotton textiles improved with metal oxide nanoparticles acquire additional features that may enhance their action against antimicrobial-resistant pathogens due to the unique properties and characteristics of the nanoparticles. The main objective of this work is to evaluate the antimicrobial features of two-sided-coated cotton textiles with ZnO nanoparticles. Nanoparticles were deposited using green chemistry technology with low-temperature oxygen plasma. ZnO particles formed stable structures on textile fibers. The optimal deposition parameters (150 W plasma power, 120 min immersion time) achieved the best effects against Gram-negative and Gram-positive bacteria and microscopic fungi. Two-sided-coated cotton with ZnO nanoparticles showed high antibacterial action on Gram-negative and Gram-positive bacteria. Modification with zinc oxide inhibited the growth of Candida albicans by more than half.

Ultrathin Carbon Textures Produced on Machined Surfaces in an Integrated Finishing Process Using Microabrasive Films

This study presents research into the unique method of depositing carbon layers onto processed surfaces, during finishing with abrasive films, on a global basis. The authors of this article are holders of the patent for this method. What makes this technology outstanding is that it integrates processes, whereby micro-finishing and the deposition of a carbon layer onto freshly exposed surface fragments is achieved simultaneously, in a single process. Among the main advantages accruable from this process is the reduction of surface irregularities, while the deposition of a carbon layer is achieved simultaneously. Ultrathin graphite layers can be widely used in conditions where other methods of reducing the coefficient of friction are not possible, such as in regard to micromechanisms. This article illustrates the application of carbon coating, end on, on a surface processed with abrasive film, containing intergranular spaces, saturated with graphite. Thin carbon layers were obtained on two substrates that did not contain carbon in their initial composition: soda-lime glass and a tin-bronze alloy. It was performed through microscopic examinations of the produced surface, roughness analyses of these surfaces, and analysis of the chemical compositions determined by two methods, namely EDS and GDOES, proving the existence of the coatings. The aim of this paper is to prove the possibility and efficiency of using graphite-impregnated lapping films in the deposition process of carbon films, with improved surface smoothness, durability, and wear resistance. The produced coatings will be tested in regard to their operational properties in further research. The authors underline the potential of this method to revolutionize surface treatment processes, due to the significant advantages it offers across various industries.

Removal of contaminants present in water and wastewater by cyclodextrin-based adsorbents: A bibliometric review from 1993 to 2022

Cyclodextrin (CD), a cyclic oligosaccharide from enzymatic starch breakdown, plays a crucial role in pharmaceuticals, food, agriculture, textiles, biotechnology, chemicals, and environmental applications, including water and wastewater treatment. In this study, a statistical analysis was performed using VOSviewer and Citespace to scrutinize 2038 articles published from 1993 to 2022. The investigation unveiled a notable upsurge in pertinent articles and citation counts, with China and USA contributing the highest publication volumes. The prevailing research focus predominantly revolves around the application of CD-based materials used as adsorbents to remove conventional contaminants such as dyes and metals. The CD chemistry allows the construction of materials with various architectures, including cross-linked, grafted, hybrid or supported systems. The main adsorbents are cross-linked CD polymers, including nanosponges, fibres and hybrid composites. Additionally, research efforts are actually concentrated on the synthesis of CD-based membranes, CD@graphene oxide, and CD@TiO2. These materials are proposed as adsorbents to remove emerging pollutants. By employing bibliometric analysis, this study delivers a comprehensive retrospective review and synthesis of research concerning CD-based adsorbents for the removal of contaminants from wastewater, thereby offering valuable insights for future large-scale application of CD-based adsorption materials.

Structural, morphological, mechanical, and electronic properties of nickel substituted manganese oxide (NixMn1-xO, x= 0.0, 0.2, 0.4) for electronic applications

The structural, morphological, mechanical, and electronic properties of nickel-substituted manganese oxide (NixMn1-xO, where x = 0.0, 0.2, and 0.4) were studied using experimental techniques. The compounds were synthesized using a hydrothermal method. The face-centered cubic structures of the examined compounds were confirmed by XRD. Scanning electron microscopy (SEM) images revealed that the particles were well-shaped, while elemental mapping with energy dispersive spectroscopy (EDS) confirmed that the examined compounds had the appropriate proportions of Ni, Mn, and O. The FT-IR spectroscopy results indicated the respective functional groups. Raman spectroscopy results disclosed the vibration modes of the respective materials. The Tauc plot reveals the semiconducting nature of the compounds. The UV-Vis bandgap study revealed the semiconductor natures of compounds. This demonstrates that these nanoparticles can be used in atom lasers, photovoltaics, and other electronic applications.

Magnetic Hydroxyapatite Nanoparticles in Regenerative Medicine and Nanomedicine

This review focuses on the latest advancements in magnetic hydroxyapatite (mHA) nanoparticles and their potential applications in nanomedicine and regenerative medicine. mHA nanoparticles have gained significant interest over the last few years for their great potential, offering advanced multi-therapeutic strategies because of their biocompatibility, bioactivity, and unique physicochemical features, enabling on-demand activation and control. The most relevant synthetic methods to obtain magnetic apatite-based materials, either in the form of iron-doped HA nanoparticles showing intrinsic magnetic properties or composite/hybrid compounds between HA and superparamagnetic metal oxide nanoparticles, are described as highlighting structure-property correlations. Following this, this review discusses the application of various magnetic hydroxyapatite nanomaterials in bone regeneration and nanomedicine. Finally, novel perspectives are investigated with respect to the ability of mHA nanoparticles to improve nanocarriers with homogeneous structures to promote multifunctional biological applications, such as cell stimulation and instruction, antimicrobial activity, and drug release with on-demand triggering.

Green biosynthesis of bimetallic selenium-gold nanoparticles using Pluchea indica leaves and their biological applications

Increasing bacterial resistance and the negative impact of currently used antibacterial agents have produced the need for novel antibacterial agents and anticancer drugs. In this regard, nanotechnology could provide safer and more efficient therapeutic agents. The main methods for nanoparticle production are chemical and physical approaches that are often costly and environmentally unsafe. In the current study, Pluchea indica leaf extract was used for the biosynthesis of bimetallic selenium-gold nanoparticles (Se-Au BNPs) for the first time. Phytochemical examinations revealed that P. indica leaf extract includes 90.25 mg/g dry weight (DW) phenolics, 275.53 mg/g DW flavonoids, and 26.45 mg/g DW tannins. X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) techniques were employed to characterize Se-Au BNPs. Based on UV-vis spectra, the absorbance of Se-Au BNPs peaked at 238 and 374 nm. In SEM imaging, Se-Au BNPs emerged as bright particles, and both Au and Se were uniformly distributed throughout the P. indica leaf extract. XRD analysis revealed that the average size of Se-Au BNPs was 45.97 nm. The Se-Au BNPs showed antibacterial properties against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis, with minimum inhibitory concentrations (MICs) of 31.25, 15.62, 31.25, and 3.9 μg/mL, respectively. Surprisingly, a cytotoxicity assay revealed that the IC50 value toward the Wi 38 normal cell line was 116.8 μg/mL, implying that all of the MICs described above could be used safely. More importantly, Se-Au BNPs have shown higher anticancer efficacy against human breast cancer cells (MCF7), with an IC50 value of 13.77 μg/mL. In conclusion, this paper is the first to provide data on the effective utilization of P. indica leaf extract in the biosynthesis of biologically active Se-Au BNPs.

Synthesis of Pectin and Eggshell Biowaste-Mediated Nano-hydroxyapatite (nHAp), Their Physicochemical Characterizations, and Use as Antibacterial Material

The current study reports the synthesis of sustainable nano-hydroxyapatite (nHAp) using a wet chemical precipitation approach. The materials used in the green synthesis of nHAp were obtained from environmental biowastes such as HAp from eggshells and pectin from banana peels. The physicochemical characterization of obtained nHAp was carried out using different techniques. For instance, X-ray diffractometer (XRD) and FTIR spectroscopy were used to study the crystallinity and synthesis of nHAp respectively. In addition, the morphology and elemental composition of nHAP were studied using FESEM equipped with EDX. HRTEM showed the internal structure of nHAP and calculated its grain size which was 64 nm. Furthermore, the prepared nHAp was explored for its antibacterial and antibiofilm activity which has received less attention previously. The obtained results showed the potential of pectin-bound nHAp as an antibacterial agent for various biomedical and healthcare applications.

A graphene oxide/polyaniline nanocomposite biosensor: synthesis, characterization, and electrochemical detection of bilirubin

The level of free bilirubin is a considerable index for the characterization of jaundice-related diseases. Herein, a biosensor was fabricated via the immobilization of bilirubin oxidase (BOx) on graphene oxide (GO) and polyaniline (PANI) that were electrochemically co-precipitated on indium tin oxide (ITO) conductive glass. The structural enzyme electrode was characterized by FTIR, XRD, and Raman spectroscopy, while the spectral and thermal properties were investigated by UV-vis and thermogravimetric analysis (TGA). Owing to the activity of the fabricated BOx/GO@PANI/ITO biosensor, it could detect free bilirubin with good selectivity and sensitivity in a low response time. The electrochemical response was studied using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). At polarization potential 0.2 V vs. Ag/AgCl, the fabricated sensor illustrated a response in only 2 s at 30 °C and pH 7.5. The LOD and LOQ for the BOx/GO@PANI/ITO biosensor were calculated and found to be 0.15 nM and 2.8 nM, respectively. The electrochemical signal showed a linear response in the concentration range 0.01-250 μM. At 5 °C, the biosensor demonstrated a half-time of 120 days, through which it could be utilized 100 times at this temperature conditions. By using a common colorimetric method, the data on bilirubin levels in serum showed a determination coefficient (R2) of 0.97.

Severe plastic deformation: Nanostructured materials, metal-based and polymer-based nanocomposites: A review

Significant deformation of the metal structure can be achieved without breaking or cracking the metal. There are several methods for deformation of metal plastics. The most important of these methods are angular channel pressing process, high-pressure torsion, multidirectional forging process, extrusion-cyclic compression process, cumulative climbing connection process, consecutive concreting and smoothing method, high-pressure pipe torsion. The nanocomposite is a multiphase material which the size of one of its phases is less than 100 nm in at least one dimension. Due to some unique properties, metal-based nanocomposites are widely used in engineering applications such as the automotive and aerospace industries. Polymer-based nanocomposites are two-phase systems with polymer-based and reinforcing phases (usually ceramic). These materials have a simpler synthesis process than metal-based nanocomposites and are used in a variety of applications such as the aerospace industry, gas pipelines, and sensors. Severe plastic deformation (SPD) is known to be the best method for producing bulk ultrafine grained and nanostructured materials with excellent properties. Different Severe plastic deformation methods were developed that are suitable for sheet and bulk solid materials. During the past decade, efforts have been made to create effective Severe plastic deformation processes suitable for producing cylindrical tubes. In this paper, we review Severe plastic deformation processes intended to nanostructured tubes, and their effects on material properties and severe plastic deformation is briefly introduced and its common methods for bulk materials, sheets, and pipes, as well as metal background nanocomposites, are concisely introduced and their microstructural and mechanical properties are discussed. The paper will focus on introduction of the tube Severe plastic deformation processes, and then comparison of them based on their advantages and disadvantages from the viewpoints of processing and properties.

A review of physical, chemical and biological synthesis methods of bimetallic nanoparticles and applications in sensing, water treatment, biomedicine, catalysis and hydrogen storage

This article provides an in-depth analysis of various fabrication methods of bimetallic nanoparticles (BNP), including chemical, biological, and physical techniques. The review explores BNP's diverse uses, from well-known applications such as sensing water treatment and biomedical uses to less-studied areas like breath sensing for diabetes monitoring and hydrogen storage. It cites results from over 1000 researchers worldwide and >300 peer-reviewed articles. Additionally, the article discusses current trends, actionable recommendations, and the importance of synthetic analysis for industry players looking to optimize manufacturing techniques for specific applications. The article also evaluates the pros and cons of various fabrication methods, highlighting the potential of plant extract synthesis for mass production of capped BNPs. However, it warns that this method may not be suitable for certain applications requiring ligand-free surfaces. In contrast, physical methods like laser ablation offer better control and reactivity, especially for applications where ligand-free surfaces are critical. The report underscores the environmental benefits of plant extract synthesis compared to chemical methods that use hazardous chemicals and pose risks to extraction, production, and disposal. The article emphasizes the need for life cycle assessment (LCA) articles in the literature, given the growing volume of research on nanotechnology materials. This article caters to researchers at all stages and applies to various fields applying nanomaterials.

Photodynamic therapy in cancer treatment: properties and applications in nanoparticles

Most of the treatment strategies for tumors and other disorders is photodynamic therapy (PDT). For several years, increasing the efficiency of nanostructured treatment devices, including light therapy, has been considered in different treatment methods. Light Dynamics The use of nanomaterial in this method's production and progress. The use of nanoparticles as carriers is a promising accomplishment, since all the criteria for an ideal photodynamic therapy agent can be given with these nanomaterials. The kinds of nanoparticles that have recently been used in photodynamic therapy are mentioned in this article. Latest advancements are being explored in the use of inorganic nanoparticles and biodegradable polymer-based nanomaterial as carriers of photosynthetic agents. Photosynthetic nanoparticles, self-propagating nanoparticles, and conversion nanoparticles are among the successful photodynamic therapy nanoparticles addressed in this report.

Biosorption performance of the multi-metal tolerant fungus Aspergillus sp. for removal of some metallic nanoparticles from aqueous solutions

The wide spread of nanotechnology applications currently carries with it the possibility of polluting the environment with the residues of these nanomaterials, especially those in the metallic form. Therefore, it is necessary to study the possibility of treating and removing various nanoscale metal pollutants in environmentally friendly ways. The present study focused on the isolation of multi-metal tolerant fungi to be applied in the bioremoval of Zn, Fe, Se, and Ag nanoparticles as potential nanoscale metal pollutants. Aspergillus sp. has been isolated as multi-metal tolerant fingus and investigated in the bioremoval of targeted nanometals from their aquoues solutions. The effect of biomass age, pH, and contact time was studied to determine the optimal biosorption conditions for fungal pellets towards metal NPs. The results showed a high percentage of fungal biosorption on the of two-day-old cells, which amounted to 39.3, 52.2, 91.7, and 76.8% of zinc, iron, selenium, and silver, respectively. The pH 7 was recorded the highest percentage of NPs removal for the four studied metals i.e. 38.8, 68.1, 80.4, and 82.0% of Zn-, Fe-, Se- and Ag-NPs, respectively. The contact time required between Aspergillus sp. and the metal nanoparticles to obtain the best adsorption was only 10 min in the case of Zn and Ag, but it was 40 min for both Fe and Se NPs. The efficiency of living fungal pellets in removing the four metallic NPs exceeded that of dead biomass by 1.8, 5.7, 2.5, and 2.5 folds for Zn, Fe, Se and Ag, respectively. However, utilization of dead fungal biomass for metallic NPs removal could be considered more applicable to the actual environmental applications.

Synthesis Methods and Optical Sensing Applications of Plasmonic Metal Nanoparticles Made from Rhodium, Platinum, Gold, or Silver

The purpose of this paper is to provide an in-depth review of plasmonic metal nanoparticles made from rhodium, platinum, gold, or silver. We describe fundamental concepts, synthesis methods, and optical sensing applications of these nanoparticles. Plasmonic metal nanoparticles have received a lot of interest due to various applications, such as optical sensors, single-molecule detection, single-cell detection, pathogen detection, environmental contaminant monitoring, cancer diagnostics, biomedicine, and food and health safety monitoring. They provide a promising platform for highly sensitive detection of various analytes. Due to strongly localized optical fields in the hot-spot region near metal nanoparticles, they have the potential for plasmon-enhanced optical sensing applications, including metal-enhanced fluorescence (MEF), surface-enhanced Raman scattering (SERS), and biomedical imaging. We explain the plasmonic enhancement through electromagnetic theory and confirm it with finite-difference time-domain numerical simulations. Moreover, we examine how the localized surface plasmon resonance effects of gold and silver nanoparticles have been utilized for the detection and biosensing of various analytes. Specifically, we discuss the syntheses and applications of rhodium and platinum nanoparticles for the UV plasmonics such as UV-MEF and UV-SERS. Finally, we provide an overview of chemical, physical, and green methods for synthesizing these nanoparticles. We hope that this paper will promote further interest in the optical sensing applications of plasmonic metal nanoparticles in the UV and visible ranges.

Application of nano-antibiotics in the diagnosis and treatment of infectious diseases

Infectious diseases are the leading cause of death worldwide. Thus, nanotechnology provides an excellent opportunity to treat drug-resistant microbial infections. Numerous antibiotics have been used to inhibit the growth and kill of microbes, but the development of resistance and the emergence of side effects have severely limited the use of these agents. Due to the development of the nanotechnology, nanoparticles are widely used as antimicrobials. Silver and chitosan nanoparticles have antifungal, antiviral and antibacterial properties, and many studies confirm the antifungal properties of silver nanoparticles. Nowadays, the use of nanoparticles in the diagnosis and treatment of infectious diseases has developed due to less side effects and also the help of these particles in effective drug delivery to the target tissue. Liposomes are also used as carriers of drug delivery, genes, and modeling of cell membranes in both animals and humans. The ability of these liposomes to encapsulate large amounts of drugs, minimize unwanted side effects, high effectiveness and low toxicity has attracted the interest of researchers. This review article examines recent efforts by researchers to identify and treat infectious diseases using antimicrobial nanoparticles and drug nano-carriers.

SERS Assays Based on Electrospun Nanofibers: Preparation and Analytical Applications

Surface-enhanced Raman spectroscopy (SERS) is a powerful tool and an up-to-date method of analytical chemistry due to its high sensitivity and fingerprint recognition capabilities. Nowadays SERS due to its label-free detection capabilities is being actively developed in medical fields, for example in the analysis of biologically important substances in different matrixes, for potential on-site detection of toxic substances, food safety, and so on. To get the SERS signal, it is necessary the presence of plasmonic nanostructures in the SERS substrates. Electrospun nanofibers have been an attractive alternative to SERS-platforms due to the diversity of advantages, including ease of preparation, structure flexibility, and others. In this review, we summarized the methods of plasmonic nanostructures incorporating substrate based on electrospun nanofibers. Also, the analytical application of SERS-active electrospun nanofibers with embedded nanostructures focused on biologically significant molecules is observed in detail. Finally, the future outlook in the application of these substrates in bioanalysis as the most promising area in analytical chemistry is presented.

Organic chemical Nano sensors: synthesis, properties, and applications

Nanosensors work on the "Nano" scale. "Nano" is a unit of measurement around 10- 9 m. A nanosensor is a device capable of carrying data and information about the behavior and characteristics of particles at the nanoscale level to the macroscopic level. Nanosensors can be used to detect chemical or mechanical information such as the presence of chemical species and nanoparticles or monitor physical parameters such as temperature on the nanoscale. Nanosensors are emerging as promising tools for applications in agriculture. They offer an enormous upgrade in selectivity, speed, and sensitivity compared to traditional chemical and biological methods. Nanosensors can be used for the determination of microbe and contaminants. With the advancement of science in the world and the advent of electronic equipment and the great changes that have taken place in recent decades, the need to build more accurate, smaller and more capable sensors was felt. Today, high-sensitivity sensors are used that are sensitive to small amounts of gas, heat, or radiation. Increasing the sensitivity, efficiency and accuracy of these sensors requires the discovery of new materials and tools. Nano sensors are nanometer-sized sensors that, due to their small size and nanometer size, have such high accuracy and responsiveness that they react even to the presence of several atoms of a gas. Nano sensors are inherently smaller and more sensitive than other sensors.

The Physicochemical and Antimicrobial Properties of Silver/Gold Nanoparticles Obtained by "Green Synthesis" from Willow Bark and Their Formulations as Potential Innovative Pharmaceutical Substances

Green chemistry is a pharmaceutical industry tool, which, when implemented correctly, can lead to a minimization in resource consumption and waste. An aqueous extract of Salix alba L. was employed for the efficient and rapid synthesis of silver/gold particle nanostructures via an inexpensive, nontoxic and eco-friendly procedure. The nanoparticles were physicochemically characterized using ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), X-ray diffraction (XRD) and scanning electron microscopy (SEM), with the best stability of up to one year in the solution obtained for silver nanoparticles without any chemical additives. A comparison of the antimicrobial effect of silver/gold nanoparticles and their formulations (hydrogels, ointments, aqueous solutions) showed that both metallic nanoparticles have antibacterial and antibiofilm effects, with silver-based hydrogels having particularly high antibiofilm efficiency. The highest antibacterial and antibiofilm efficacies were obtained against Pseudomonas aeruginosa when using silver nanoparticle hydrogels, with antibiofilm efficacies of over 75% registered. The hydrogels incorporating green nanoparticles displayed a 200% increased bacterial efficiency when compared to the controls and their components. All silver nanoparticle formulations were ecologically obtained by "green synthesis" and were shown to have an antimicrobial effect or potential as keratinocyte-acting pharmaceutical substances for ameliorating infectious psoriasis wounds.