Natural and Eco-Friendly Materials for Triboelectric Energy Harvesting

Wearable Standalone Sensing Systems for Smart Agriculture

Monitoring crops' biotic and abiotic responses through sensors is crucial for conserving resources and maintaining crop production. Existing sensors often have technical limitations, measuring only specific parameters with limited reliability and spatial or temporal resolution. Wearable sensing systems are emerging as viable alternatives for plant health monitoring. These systems employ flexible materials attached to the plant body to detect nonchemical (mechanical and optical) and chemical parameters, including transpiration, plant growth, and volatile organic compounds, alongside microclimate factors like surface temperature and humidity. In smart farming, data from real-time monitoring using these sensors, integrated with Internet of Things technologies, can enhance crop production efficiency by supporting growth environment optimization and pest and disease management. This study examines the core components of wearable standalone systems, such as sensors, circuits, and power sources, and reviews their specific sensing targets and operational principles. It further discusses wearable sensors for plant physiology and metabolite monitoring, affordability, and machine learning techniques for analyzing multimodal sensor data. By summarizing these aspects, this study aims to advance the understanding and development of wearable sensing systems for sustainable agriculture.

Micro-Electro Nanofibrous Dressings Based on PVDF-AgNPs as Wound Healing Materials to Promote Healing in Active Areas

Purpose

The purpose of this study is to develop an innovative solution for chronic wounds in high-mobility areas, such as joints, where conventional treatments are hindered by passive healing mechanisms and the need for immobilization. By designing a micro-electro-Nanofiber dressing composed of piezoelectric polyvinylidene fluoride (PVDF) integrated with antimicrobial silver nanoparticles (AgNPs), this research aims to address the dual challenges of promoting effective wound healing and maintaining joint mobility.

Methods

Herein, we developed a novel micro-electro-Nanofiber dressing using electrospinning technology, incorporating polyvinylidene fluoride (PVDF) with silver nanoparticles (AgNPs). The optimized PVDF-AgNPs Nanofiber dressings exhibited strong piezoelectric effects suitable for joint wounds.

Results

In vitro experiments demonstrated that the dressing effectively promoted fibroblast migration and collagen synthesis. In vivo, the dressing exhibited a trend of rapid healing in infected wounds within 12 days while modulating macrophage differentiation toward the anti-inflammatory M2 phenotype. Additionally, the incorporation of antimicrobial nanosilver effectively controlled local infections, further facilitating the healing process.

Conclusion

To sum up, by harnessing the piezoelectric effect to stimulate endogenous healing mechanisms without restricting joint mobility, the developed PVDF-AgNPs Nanofiber dressings represent a transformative approach for the treatment of wounds in highly mobile body areas.

Characterization of the Phononic Landscape of Natural Nacre from Abalone Shells

Natural design and fabrication strategies have long served as a source of inspiration for novel materials with enhanced properties. Less investigated is the prospect of leveraging the complexity of readily available, naturally occurring micro-/nanostructures as platforms for investigating functional materials. In the field of phononics, exploiting structural biocomposites is gaining traction; but finding natural phononic structures that interact with ultra- and hypersonic acoustic waves remains an open quest. In this context, the phononic behavior of natural Nacre, a biocomposite often looked at for inspiration due to its superlattice-like architecture of alternating organic and inorganic phases, is here characterized. To such end, a combination of non-contact pump-probe laser ultrasonics techniques and Brillouin spectroscopy are employed to interrogate Nacre's hierarchical structure at the micro- and nanoscale and measure its phononic dispersion behavior in the MHz and GHz range. It is found that for wavelengths longer than the brick-and-mortar characteristic length, Nacre behaves as a dispersionless medium with effective transversely isotropic properties; but as the wavelengths become comparable to its structural periodicity an involved phononic spectrum arises which challenges the notion of a perfectly periodic, high mechanical-contrast biocomposite.

Biowaste-Derived Triboelectric Nanogenerators for Emerging Bioelectronics

Triboelectric nanogenerators (TENGs) combine contact electrification and electrostatic induction effects to convert waste mechanical energy into electrical energy. As conventional devices contribute to electronic waste, TENGs based on ecofriendly and biocompatible materials have been developed for various energy applications. Owing to the abundance, accessibility, low cost, and biodegradability of biowaste (BW), recycling these materials has gained considerable attention as a green approach for fabricating TENGs. This review provides a detailed overview of BW materials, processing techniques for BW-based TENGs (BW-TENGs), and potential applications of BW-TENGs in emerging bioelectronics. In particular, recent progress in material design, fabrication methods, and biomechanical and environmental energy-harvesting performance is discussed. This review is aimed at promoting the continued development of BW-TENGs and their adoption for sustainable energy-harvesting applications in the field of bioelectronics.

Enhanced Hybrid Nanogenerator Based on PVDF-HFP and PAN/BTO Coaxially Structured Electrospun Nanofiber

Nanogenerators have garnered significant interest as environmentally friendly and potential energy-harvesting systems. Nanogenerators can be broadly classified into piezo-, tribo-, and hybrid nanogenerators. The hybrid nanogenerator used in this experiment is a nanogenerator that uses both piezo and tribo effects. These hybrid nanogenerators have the potential to be used in wearable electronics, health monitoring, IoT devices, and more. In addition, the versatility of the material application in electrospinning makes it an ideal complement to hybrid nanogenerators. However, despite their potential, several experimental variables, biocompatibility, and harvesting efficiency require improvement in the research field. In particular, maximizing the output voltage of the fibers is a significant challenge. Based on this premise, this study aims to characterize hybrid nanogenerators (HNGs) with varied structures and material combinations, with a focus on identifying HNGs that exhibit superior piezoelectric- and triboelectric-induced voltage. In this study, several HNGs based on coaxial structures were fabricated via electrospinning. PVDF-HFP and PAN, known for their remarkable electrospinning properties, were used as the primary materials. Six combinations of these two materials were fabricated and categorized into homo and hetero groups based on their composition. The output voltage of the hetero group surpassed that of the homo group, primarily because of the triboelectric-induced voltage. Specifically, the overall output voltage of the hetero group was higher. In addition, the combination group with the most favorable voltage characteristics combined PVDF-HFP@PAN(BTO) and PAN hollow, boasting an output voltage of approximately 3.5 V.

Unraveling the Role of 2D Ti3C2Tx MXene Nanosheets in Cu-Based Double Perovskite Active Layer for Enhanced Photovoltaic Performance

Although the atmospheric stability of lead-free inorganic double perovskite (DP) solar cells (PSCs) looks promising, their further development is hampered by inadequate film quality and non-radiative carrier recombination at the interfaces. Herein, the incorporation of a newly developed intriguing class of 2D material Ti3C2Tx MXene nanosheets with the photo-absorbing Cu2AgBiI6 (CABI) active layer of a fully inorganic solar cell is reported. The highly conductive Ti3C2Tx nanosheets work as a multi-functional additive by tuning the band gap, reducing the non-radiative carrier recombination, and inhibiting carrier accumulation. In addition, the presence of Ti3C2Tx MXene increases the surface free energy of the perovskite film, which elevates the energy barrier for nucleation and realizes a highly crystalline CABI perovskite film. Primarily, the MXene modification accelerates the charge extraction and transport at the interfaces of the active layer, utilizing energy level alignment with the charge transport layers. Consequently, the photo-conversion efficiency (PCE) of the device with MXene is substantially enhanced to 1.50%. Moreover, the 2D Ti3C2Tx nanosheets increased the long-term stability of the devices by retaining 70% of the initial PCE after 1680 h. With regard to relieving the severe carrier recombination at the interfaces, this work sets a new paradigm toward imminent solar energy conversion.

Promoted Overall Water Splitting Catalytic Activity and Durability of Ni3Fe Alloy by Designing N-Doped Carbon Encapsulation

Combining an electrochemically stable material onto the surface of a catalyst can improve the durability of a transition metal catalyst, and enable the catalyst to operate stably at high current density. Herein, the contribution of the N-doped carbon shell (NCS) to the electrochemical properties is evaluated by comparing the characteristics of the Ni3Fe@NCS catalyst with the N-doped carbon shell, and the Ni3Fe catalyst. The synthesized Ni3Fe@NCS catalyst has a distinct overpotential difference from the Ni3Fe catalyst (ηOER = 468.8 mV, ηHER = 462.2 mV) at (200 and -200) mA cm-2 in 1 m KOH. In stability test at (10 and -10) mA cm-2, the Ni3Fe@NCS catalyst showed a stability of (95.47 and 99.6)%, while the Ni3Fe catalyst showed a stability of (72.4 and 95.9)%, respectively. In addition, the in situ X-ray Absorption Near Edge Spectroscopy (XANES) results show that redox reaction appeared in the Ni3Fe catalyst by applying voltages of (1.7 and -0.48) V. The decomposition of nickel and iron due to the redox reaction is detected as a high ppm concentration in the Ni3Fe catalyst through Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) analysis. This work presents the strategy and design of a next-generation electrochemical catalyst to improve the electrocatalytic properties and stability.

An Anthocyanin-Based Eco-Friendly Triboelectric Nanogenerator for pH Monitoring and Energy Harvesting

In recent years, renewable and sustainable triboelectric nanogenerators have attracted attention due to their high energy conversion rate, and enhancing their functionality further contributes to their applicability across various fields. A pH-sensitive triboelectric nanogenerator (pH-TENG) has been prepared by electrostatic spinning technology, with anthocyanin as the pH indicator and environmentally friendly polyvinyl alcohol (PVA) as the substrate. Among many friction-negative materials, the pH-TENG exhibits the best combination with fluorinated ethylene propylene (FEP) and yields an open-circuit voltage of 62 V, a short-circuit current of 370 nA, and a transferred charge of 21.8 nC. At a frequency of 3 Hz, it can charge a 4.7 μF capacitor to 2 V within 45 s, effectively powering a thermometer. Furthermore, the presence of anthocyanin does not affect the pH-TENG's power generation performance and enables the monitoring of a wide range of environmental pH changes, with an ΔE change of 28.8 ± 7.6. Therefore, pH-TENG prepared with environmentally friendly materials can bring new available materials to the biological and medical fields.

Naturally Crosslinked Biocompatible Carbonaceous Liquid Metal Aqueous Ink Printing Wearable Electronics for Multi-Sensing and Energy Harvesting

Achieving flexible electronics with comfort and durability comparable to traditional textiles is one of the ultimate pursuits of smart wearables. Ink printing is desirable for e-textile development using a simple and inexpensive process. However, fabricating high-performance atop textiles with good dispersity, stability, biocompatibility, and wearability for high-resolution, large-scale manufacturing, and practical applications has remained challenging. Here, water-based multi-walled carbon nanotubes (MWCNTs)-decorated liquid metal (LM) inks are proposed with carbonaceous gallium-indium micro-nanostructure. With the assistance of biopolymers, the sodium alginate-encapsulated LM droplets contain high carboxyl groups which non-covalently crosslink with silk sericin-mediated MWCNTs. E-textile can be prepared subsequently via printing technique and natural waterproof triboelectric coating, enabling good flexibility, hydrophilicity, breathability, wearability, biocompatibility, conductivity, stability, and excellent versatility, without any artificial chemicals. The obtained e-textile can be used in various applications with designable patterns and circuits. Multi-sensing applications of recognizing complex human motions, breathing, phonation, and pressure distribution are demonstrated with repeatable and reliable signals. Self-powered and energy-harvesting capabilities are also presented by driving electronic devices and lighting LEDs. As proof of concept, this work provides new opportunities in a scalable and sustainable way to develop novel wearable electronics and smart clothing for future commercial applications.

Soft multi-layer actuators integrated with the functions of electrical energy harvest and storage

Soft multi-layer actuators are smart, lightweight, and flexible, which can be used in a wide range of fields such as artificial muscles, advanced medical devices, and wearable devices. The research on the actuation property of the soft actuators has made significant progress, paving the way for the controllable motions of the actuators. However, compared with the intelligence and adaptability of life in nature, these actuators still have the problem of insufficient intelligence. The phenomenon is reflected in a lack of continuous supply of energy. Therefore, it has become a development trend to combine functions such as energy harvesting, storage, and conversion with actuators to build intelligent actuators. This concept presents a synopsis of the advancements made in soft actuators that have been coupled with the capabilities of electrical energy harvesting and storage. The design concepts and typical applications of this soft smart actuators are introduced in detail. Finally, the future research directions and applications of smart actuators are prospected from our perspective.

Smart Printed Triboelectric Wearable Sensor with High Performance for Glove-Based Motion Detection

In a world increasingly driven by data, wearable triboelectric nanogenerators (TENGs) offer a convenient way to monitor and collect information about human body motions. To meet the demands of the large-scale production of wearable TENGs, material selection to realize a high conversion efficiency and simplify the fabrication process remains a challenge. To address these issues, we present a simple-structured wearable printed arc-shaped triboelectric sensor (PATS) for finger motion detection by leveraging inkjet printing technology. In this regard, pressure sensors composed of diverse materials based on dielectric-dielectric and metal-dielectric structures in contact-separation mode were fabricated and compared. Thanks to the unique characteristics of the silver nanoparticle (Ag-NP)-printed layer and silicon rubber (SR), the SR-Ag PATS shows a high peak-to-peak voltage of 14.15 V and a short-circuit current of 0.78 μA. The proposed sensor with the capability of accurately identifying finger motions at various bending angles suggests promising application potential in glove-based human-machine interface (HMI) systems.

Crystalline Porous Material-Based Nanogenerators: Recent Progress, Applications, Challenges, and Opportunities

Nanogenerator (NG) is a potential technology that allows to build self-powered systems, sensors, flexible and portable electronics in the current Internet of Things (IoT) generation. Nanogenerators include piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs), convert different forms of mechanical motion into useful electrical signals. They have evolved and expanded their applications in various fields since their discovery in 2006 and 2012. Material selection is crucial for designing efficient NGs, with high conversion efficiencies. In the recent past, crystalline porous mat erials (metal-organic frameworks (MOFs) and covalent organic frameworks (COFs)) have been widely reported as potential candidates for nanogenerators, owing to their special properties of large surface area, porosity tailoring, ease of surface, post-synthesis modification, and chemical stability. The present organized review provides a complete overview of all the crystalline porous materials (CPMs)-based nanogenerator devices reported in the literature, including synthesis, characterization, device fabrication, and potential applications. Additionally, this review article discusses current challenges, future directions, and perspectives in the field of CPMs-NGs.

Advances in Bioresorbable Triboelectric Nanogenerators

With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.

DNA-Nanocrystal Assemblies for Environmentally Responsive and Highly Efficient Energy Harvesting and Storage

Natural polymer-based and self-powered bioelectronic devices are attracting attention owing to an increased interest in human health monitoring and human-machine interfaces. However, obtaining both high efficiency and multifunctionality from a single natural polymer-based bioelectronics platform is still challenging. Here, molybdenum disulfide (MoS2 ) nanoparticle- and carbon quantum dot (CQDs)-incorporated deoxyribonucleic acid (DNA) nanocomposites are reported for energy harvesting, motion sensing, and charge storing. With nanomaterial-based electrodes, the MoS2 -CQD-DNA nanocomposite exhibits a high triboelectric open-circuit voltage of 1.6 kV (average) and an output power density of 275 mW cm-2 , which is sufficient for turning on hundred light-emitting diodes and for a highly sensitive motion sensing. Notably, the triboelectric performance can be tuned by external stimuli (light and thermal energy). Thermal and photon energy absorptions by the nanocomposite generate additional charges, resulting in an enhanced triboelectric performance. The MoS2 -CQD-DNA nanocomposite can also be applied as a capacitor material. Based on the obtained electronic properties, such as capacitances, dielectric constants, work functions, and bandgaps, it is possible that the charges generated by the MoS2 -CQD-DNA triboelectric nanogenerator can be stored in the MoS2 -CQD-DNA capacitor. A new way is presented here to expand the application area of self-powered devices in wearable and implantable electronics.

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors

Biomechanical and nanomechanical energy harvesting systems have gained a wealth of interest, resulting in a plethora of research into the development of biopolymeric-based devices as sustainable alternatives. Piezoelectric, triboelectric, and hybrid nanogenerator devices for electrical applications are engineered and fabricated using innovative, sustainable, facile-approach flexible composite films with high performance based on bacterial cellulose and BaTiO₃ , intrinsically and structurally enhanced by Pluronic F127, a micellar cross-linker. The voltage and current outputs of the modified versions with multiwalled carbon nanotube as a conductivity enhancer and post-poling effect are 38 V and 2.8 µA cm^-2 , respectively. The multiconnective devices' power density can approach 10 µW cm^-2 . The rectified output power is capable of charging capacitors, driving light-emitting diode lights, powering a digital watch and interfacing with a commercial microcontroller board to operate as a piezoresistive force sensor switch as a proof of concept. Magnetoelectric studies show that the composites have the potential to be incorporated into magnetoelectric systems. The biopolymeric composites prove to be desirable candidates for multifunctional energy harvesters and electronic devices.

Human Machine Interface with Wearable Electronics Using Biodegradable Triboelectric Films for Calligraphy Practice and Correction

Letter handwriting, especially stroke correction, is of great importance for recording languages and expressing and exchanging ideas for individual behavior and the public. In this study, a biodegradable and conductive carboxymethyl chitosan-silk fibroin (CSF) film is prepared to design wearable triboelectric nanogenerator (denoted as CSF-TENG), which outputs of Voc ≈ 165 V, Isc ≈ 1.4 μA, and Qsc ≈ 72 mW cm-2. Further, in vitro biodegradation of CSF film is performed through trypsin and lysozyme. The results show that trypsin and lysozyme have stable and favorable biodegradation properties, removing 63.1% of CSF film after degrading for 11 days. Further, the CSF-TENG-based human-machine interface (HMI) is designed to promptly track writing steps and access the accuracy of letters, resulting in a straightforward communication media of human and machine. The CSF-TENG-based HMI can automatically recognize and correct three representative letters (F, H, and K), which is benefited by HMI system for data processing and analysis. The CSF-TENG-based HMI can make decisions for the next stroke, highlighting the stroke in advance by replacing it with red, which can be a candidate for calligraphy practice and correction. Finally, various demonstrations are done in real-time to achieve virtual and real-world controls including writing, vehicle movements, and healthcare.

Triboelectric Generator Based on Oriented Self-Assembled Peptide Microbelts

Along with piezoelectric nanogenerators, triboelectric nanogenerators (TENGs) collecting energy from mechanical vibrations proved to be simple, low-cost, and efficient sources of electricity for various applications. In view of possible biomedical applications, the search for TENGs made of biomolecular and biocompatible materials is demanding. Diphenylalanine (FF) microstructures are promising for these applications due to their unique characteristics and ability to form various morphologies (microribbons, spherical vesicles, fibrils, micro- and nanotubes, nanorods, etc.). In this work, we developed a contact-separate mode TENG based on arrays of oriented FF microbelts deposited by dip-coating technique and studied their performance under various temperature treatments. We show that these TENGs outperform piezoelectric nanogenerators based on FF microbelts in terms of short-circuit current (ISC), open-circuit voltage (VOC), and output power. It was found that bound water captured in FF nanochannels mainly affects VOC, whereas mobile water increases ISC. We also found that the cyclization of FF molecules increases the performance of TENG likely due to an increase in surface energy and surface flattening.

Power Output Enhancement of Natural Rubber Based Triboelectric Nanogenerator with Cellulose Nanofibers and Activated Carbon

The growing demand for energy and environmental concern are crucial driving forces for the development of green and sustainable energy. The triboelectric nanogenerator (TENG) has emerged as a promising solution for harvesting mechanical energy from the environment. In this research, a natural rubber (NR)-based TENG has been developed with an enhanced power output from the incorporation of cellulose nanofibers (CNF) and activated carbon (AC) nanoparticles. The highest voltage output of 137 V, a current of 12.1 µA, and power density of 2.74 W/m2 were achieved from the fabricated NR-CNF-AC TENG. This is attributed to the synergistic effect of the electron-donating properties of cellulose material and the large specific surface area of AC materials. The enhancement of TENG performance paves the way for the application of natural-based materials to convert mechanical energy into electricity, as a clean and sustainable energy source.

Hierarchical Porous Cellulosic Triboelectric Materials for Extreme Environmental Conditions

Synthetic polymer materials such as paraformaldehyde and polyamides are widely used in the field of energy engineering. However, they pose a challenge to environmental sustainability because they are derived from petrochemicals that are non-renewable and difficult to degrade in the natural environment. The development of high-performance natural alternatives is clearly emerging as a promising mitigation option. Inspired by natural bamboo, this research reports a "three-step" strategy for the large-scale production of triboelectric materials with special nanostructures from natural bamboo. Benefiting from the special hierarchical porous structure of the material, Bamboo/polyaniline triboelectric materials can reach short-circuit current of 2.9 µA and output power of 1.1 W m^-2 at a working area of only 1 cm² , which exceeds most wood fiber-based triboelectric materials. More importantly, it maintains 85% energy harvesting after an extreme environment of high temperature (200 °C), low temperature (-196 °C), combustion environment, and multiple thermal shocks (ΔT = 396 °C). This is unmatched by current synthetic polymer materials. This work provides new research ideas for the construction and application of biomass structural materials under extreme environmental conditions.

Triboelectric nanogenerators as wearable power sources and self-powered sensors

Smart wearable technologies are augmenting human bodies beyond our biological capabilities in communication, healthcare and recreation. Energy supply and information acquisition are essential for wearable electronics, whereas the increasing demands in multifunction are raising the requirements for energy and sensor devices. The triboelectric nanogenerator (TENG), proven to be able to convert various mechanical energies into electricity, can fulfill either of these two functions and therefore has drawn extensive attention and research efforts worldwide. The everyday life of a human body produces considerable mechanical energies and, in the meantime, the human body communicates mainly through mechanical signals, such as sound, body gestures and muscle movements. Therefore, the TENG has been intensively studied to serve as either wearable sources or wearable self-powered sensors. Herein, the recent finding on the fundamental understanding of TENGs is revisited briefly, followed by a summary of recent advancements in TENG-based wearable power sources and self-powered sensors. The challenges and prospects of this area are given as well.

Recent Progress of Triboelectric Nanogenerators for Biomedical Sensors: From Design to Application

Triboelectric nanogenerators (TENG) have gained prominence in recent years, and their structural design is crucial for improvement of energy harvesting performance and sensing. Wearable biosensors can receive information about human health without the need for external charging, with energy instead provided by collection and storage modules that can be integrated into the biosensors. However, the failure to design suitable components for sensing remains a significant challenge associated with biomedical sensors. Therefore, design of TENG structures based on the human body is a considerable challenge, as biomedical sensors, such as implantable and wearable self-powered sensors, have recently advanced. Following a brief introduction of the fundamentals of triboelectric nanogenerators, we describe implantable and wearable self-powered sensors powered by triboelectric nanogenerators. Moreover, we examine the constraints limiting the practical uses of self-powered devices.

Self-Powered, Long-Durable, and Highly Selective Oil-Solid Triboelectric Nanogenerator for Energy Harvesting and Intelligent Monitoring

Triboelectric nanogenerators (TENGs) have potential to achieve energy harvesting and condition monitoring of oils, the "lifeblood" of industry. However, oil absorption on the solid surfaces is a great challenge for oil-solid TENG (O-TENG). Here, oleophobic/superamphiphobic O-TENGs are achieved via engineering of solid surface wetting properties. The designed O-TENG can generate an excellent electricity (with a charge density of 9.1 µC m^-2 and a power density of 1.23 mW m^-2), which is an order of magnitude higher than other O-TENGs made from polytetrafluoroethylene and polyimide. It also has a significant durability (30,000 cycles) and can power a digital thermometer for self-powered sensor applications. Further, a superhigh-sensitivity O-TENG monitoring system is successfully developed for real-time detecting particle/water contaminants in oils. The O-TENG can detect particle contaminants at least down to 0.01 wt% and water contaminants down to 100 ppm, which are much better than previous online monitoring methods (particle > 0.1 wt%; water > 1000 ppm). More interesting, the developed O-TENG can also distinguish water from other contaminants, which means the developed O-TENG has a highly water-selective performance. This work provides an ideal strategy for enhancing the output and durability of TENGs for oil-solid contact and opens new intelligent pathways for oil-solid energy harvesting and oil condition monitoring.

Advanced Implantable Biomedical Devices Enabled by Triboelectric Nanogenerators

Implantable biomedical devices (IMDs) play essential roles in healthcare. Subject to the limited battery life, IMDs cannot achieve long-term in situ monitoring, diagnosis, and treatment. The proposal and rapid development of triboelectric nanogenerators free IMDs from the shackles of batteries and spawn a self-powered healthcare system. This review aims to overview the development of IMDs based on triboelectric nanogenerators, divided into self-powered biosensors, in vivo energy harvesting devices, and direct electrical stimulation therapy devices. Meanwhile, future challenges and opportunities are discussed according to the development requirements of current-level self-powered IMDs to enhance output performance, develop advanced triboelectric nanogenerators with multifunctional materials, and self-driven close-looped diagnosis and treatment systems.

Whey Protein Isolate Film and Laser-Ablated Textured PDMS-Based Single-Electrode Triboelectric Nanogenerator for Pressure-Sensor Application

The use of biopolymers for realizing economical and eco-friendly triboelectric nanogenerators (TENGs) widens the application prospects of TENGs. Herein, an animal-sourced whey protein isolate (WPI) film, processed and prepared by a simple aqueous solution preparation and drop-casting technique, is applied to demonstrate its potential use in bio-TENGs. With the addition of formaldehyde in WPI, the films result in a free-standing and flexible film, whereas the pure WPI films are difficult to handle and lack flexibility. A TENG device based on the WPI and the laser-ablated textured polydimethylsiloxane (PDMS) for pressure-sensor application were developed. The output voltage of the TENG comprising WPI increased nearly two-fold compared to the TENG without WPI. A simple single-electrode TENG device configuration was adopted so that it could be easily integrated into a wearable electronic device. Moreover, WPI film exhibited tribo-negative-like material characteristics. This study provides new insights into the development of biocompatible and eco-friendly biopolymers for various electronic devices and sensors.

Electron-Ion Coupling Mechanism to Construct Stable Output Performance Nanogenerator

Recently, triboelectric nanogenerators (TENGs) have been promoted as an effective technique for ambient energy harvesting, given their large power density and high energy conversion efficiency. However, traditional TENGs based on the combination of triboelectrification effect and electrostatic induction have proven susceptible to environmental influence, which intensively restricts their application range. Herein, a new coupling mechanism based on electrostatic induction and ion conduction is proposed to construct flexible stable output performance TENGs (SOP-TENGs). The calcium chloride doped-cellulose nanofibril (CaCl₂-CNF) film made of natural carrots was successfully introduced to realize this coupling, resulting from its intrinsic properties as natural nanofibril hydrogel serving as both triboelectric layer and electrode. The coupling of two conductive mechanisms of SOP-TENG was comprehensively investigated through electrical measurements, including the effects of moisture content, relative humidity, and electrode size. In contrast to the conventional hydrogel ionotronic TENGs that require moisture as the carrier for ion transfer and use a hydrogel layer as the electrode, the use of a CaCl₂-CNF film (i.e., ion-doped natural hydrogel layer) as a friction layer in the proposed SOP-TENG effectively realizes a superstable electrical output under varying moisture contents and relative humidity due to the compound transfer mechanism of ions and electrons. This new working principle based on the coupling of electrostatic induction and ion conduction opens a wider range of applications for the hydrogel ionotronic TENGs, as the superstable electrical output enables them to be more widely applied in various complex environments to supply energy for low-power electronic devices.

Flexible Ag Microparticle/MXene-Based Film for Energy Harvesting

Ultra-thin flexible films have attracted wide attention because of their excellent ductility and potential versatility. In particular, the energy-harvesting films (EHFs) have become a research hotspot because of the indispensability of power source in various devices. However, the design and fabrication of such films that can capture or transform different types of energy from environments for multiple usages remains a challenge. Herein, the multifunctional flexible EHFs with effective electro-/photo-thermal abilities are proposed by successive spraying Ag microparticles and MXene suspension between on waterborne polyurethane films, supplemented by a hot-pressing. The optimal coherent film exhibits a high electrical conductivity (1.17×104 S m-1), excellent Joule heating performance (121.3 °C) at 2 V, and outstanding photo-thermal performance (66.2 °C within 70 s under 100 mW cm-1). In addition, the EHFs-based single-electrode triboelectric nanogenerators (TENG) give short-circuit transferred charge of 38.9 nC, open circuit voltage of 114.7 V, and short circuit current of 0.82 μA. More interestingly, the output voltage of TENG can be further increased via constructing the double triboelectrification layers. The comprehensive ability for harvesting various energies of the EHFs promises their potential to satisfy the corresponding requirements.

Recent Progress in Development of Wearable Pressure Sensors Derived from Biological Materials

This review summarizes recent progress in the use of biological materials (biomaterials) in wearable pressure sensors. Biomaterials are abundant, sustainable, biocompatible, and biodegradable. Especially, many have sophisticated hierarchical structure and biological characteristics, which are attractive candidates for facile and ecologically-benign fabrication of wearable pressure sensors that are biocompatible, biodegradable, and highly sensitivity. The biomaterials and structures that use them in wearable pressure sensors that exploit sensing mechanisms such as piezoelectric, triboelectric, piezoresistive and capacitive effects are present. Finally, remaining impediments are discussed to use of biomaterials in wearable pressure sensors.

Boosted output performance of nanocellulose-based triboelectric nanogenerators via device engineering and surface functionalization

Triboelectric nanogenerators (TENGs) provide promising potential to sustainably power modern portable electronic devices through harvesting mechanical energy from the environment. There is a need to further improve the sustainability credentials of TENGs by reducing the usage of non-renewable materials. Nanocellulose possessing outstanding properties, can partially replace non-renewable materials used in TENGs. Here, main sources and types of nanocellulose and methods of forming nanocellulose-based 2D/3D configurations used as triboelectric layers of TENGs are introduced. Cellulose has relatively weak tribopositivity and this review describes effective strategies of amplifying the output performance of TENGs possessing a nanocellulose-based tribopositive layer. Furthermore, efforts made to change the polarity of nanocellulose structures in order to use them as both positive and negative triboelectric layers are reviewed and their output performance is compared to that of all-synthetic polymer-based TENGs. Finally, requirements expected to be met in near future for development of commercial green nanocellulose-based TENGs are highlighted.

Piezoresponse in Ferroelectric Materials under Uniform Electric Field of Electrodes

The analytical solution for the displacements of an anisotropic piezoelectric material in the uniform electric field is presented for practical use in the "global excitation mode" of piezoresponse force microscopy. The solution is given in the Wolfram Mathematica interactive program code, allowing the derivation of the expression of the piezoresponse both in cases of the anisotropic and isotropic elastic properties. The piezoresponse's angular dependencies are analyzed using model lithium niobate and barium titanate single crystals as examples. The validity of the isotropic approximation is verified in comparison to the fully anisotropic solution. The approach developed in the paper is important for the quantitative measurements of the piezoelectric response in nanomaterials as well as for the development of novel piezoelectric materials for the sensors/actuators applications.

Hierarchical Honeycomb-Structured Electret/Triboelectric Nanogenerator for Biomechanical and Morphing Wing Energy Harvesting

Flexible, compact, lightweight and sustainable power sources are indispensable for modern wearable and personal electronics and small-unmanned aerial vehicles (UAVs). Hierarchical honeycomb has the unique merits of compact mesostructures, excellent energy absorption properties and considerable weight to strength ratios. Herein, a honeycomb-inspired triboelectric nanogenerator (h-TENG) is proposed for biomechanical and UAV morphing wing energy harvesting based on contact triboelectrification wavy surface of cellular honeycomb structure. The wavy surface comprises a multilayered thin film structure (combining polyethylene terephthalate, silver nanowires and fluorinated ethylene propylene) fabricated through high-temperature thermoplastic molding and wafer-level bonding process. With superior synchronization of large amounts of energy generation units with honeycomb cells, the manufactured h-TENG prototype produces the maximum instantaneous open-circuit voltage, short-circuit current and output power of 1207 V, 68.5 μA and 12.4 mW, respectively, corresponding to a remarkable peak power density of 0.275 mW cm-3 (or 2.48 mW g-1) under hand pressing excitations. Attributed to the excellent elastic property of self-rebounding honeycomb structure, the flexible and transparent h-TENG can be easily pressed, bent and integrated into shoes for real-time insole plantar pressure mapping. The lightweight and compact h-TENG is further installed into a morphing wing of small UAVs for efficiently converting the flapping energy of ailerons into electricity for the first time. This research demonstrates this new conceptualizing single h-TENG device's versatility and viability for broad-range real-world application scenarios.

Recent progress in silk fibroin-based flexible electronics

With the rapid development of the Internet of Things (IoT) and the emergence of 5G, traditional silicon-based electronics no longer fully meet market demands such as nonplanar application scenarios due to mechanical mismatch. This provides unprecedented opportunities for flexible electronics that bypass the physical rigidity through the introduction of flexible materials. In recent decades, biological materials with outstanding biocompatibility and biodegradability, which are considered some of the most promising candidates for next-generation flexible electronics, have received increasing attention, e.g., silk fibroin, cellulose, pectin, chitosan, and melanin. Among them, silk fibroin presents greater superiorities in biocompatibility and biodegradability, and moreover, it also possesses a variety of attractive properties, such as adjustable water solubility, remarkable optical transmittance, high mechanical robustness, light weight, and ease of processing, which are partially or even completely lacking in other biological materials. Therefore, silk fibroin has been widely used as fundamental components for the construction of biocompatible flexible electronics, particularly for wearable and implantable devices. Furthermore, in recent years, more attention has been paid to the investigation of the functional characteristics of silk fibroin, such as the dielectric properties, piezoelectric properties, strong ability to lose electrons, and sensitivity to environmental variables. Here, this paper not only reviews the preparation technologies for various forms of silk fibroin and the recent progress in the use of silk fibroin as a fundamental material but also focuses on the recent advanced works in which silk fibroin serves as functional components. Additionally, the challenges and future development of silk fibroin-based flexible electronics are summarized. (1) This review focuses on silk fibroin serving as active functional components to construct flexible electronics. (2) Recent representative reports on flexible electronic devices that applied silk fibroin as fundamental supporting components are summarized. (3) This review summarizes the current typical silk fibroin-based materials and the corresponding advanced preparation technologies. (4) The current challenges and future development of silk fibroin-based flexible electronic devices are analyzed.

Fully Fabric-Based Triboelectric Nanogenerators as Self-Powered Human-Machine Interactive Keyboards

Combination flexible and stretchable textiles with self-powered sensors bring a novel insight into wearable functional electronics and cyber security in the era of Internet of Things. This work presents a highly flexible and self-powered fully fabric-based triboelectric nanogenerator (F-TENG) with sandwiched structure for biomechanical energy harvesting and real-time biometric authentication. The prepared F-TENG can power a digital watch by low-frequency motion and respond to the pressure change by the fall of leaves. A self-powered wearable keyboard (SPWK) is also fabricated by integrating large-area F-TENG sensor arrays, which not only can trace and record electrophysiological signals, but also can identify individuals' typing characteristics by means of the Haar wavelet. Based on these merits, the SPWK has promising applications in the realm of wearable electronics, self-powered sensors, cyber security, and artificial intelligences.

Comparison of the Dielectric Properties of Ecoflex® with L,D-Poly(Lactic Acid) or Polycaprolactone in the Presence of SWCN or 5CB

The main goal of this paper was to study the dielectric properties of hybrid binary and ternary composites based on biodegradable polymer Ecoflex®, single walled carbon nanotubes (SWCN), and liquid crystalline 4'-pentyl-4-biphenylcarbonitrile (5CB) compound. The obtained results were compared with other created analogically to Ecoflex®, hybrid layers based on biodegradable polymers such as L,D-polylactide (L,D-PLA) and polycaprolactone (PCL). Frequency domain dielectric spectroscopy (FDDS) results were analyzed taking into consideration the amount of SWCN, frequency, and temperature. For pure Ecoflex®, two relaxation processes (α and β) were identified. It was shown that the SWCN admixture (in the weight ratio 10:0.01) did not change the properties of the Ecoflex® layer, while in the case of PCL and L,D-PLA, the layers became conductive. The dielectric constant increased with an increase in the content of SWCN in the Ecoflex® matrix and the conductive behavior was not visible, even for the greatest concentration (10:0.06 weight ratio). In the case of the Ecoflex® polymer matrix, the conduction relaxation process at a frequency ca. several kilohertz appeared and became stronger with an increase in the SWCN admixture in the matrix. Addition of oleic acid to the polymer matrix had a smaller effect on the increase in the dielectric response than the addition of liquid crystal 5CB. Fourier transform infrared (FTIR) results revealed that the molecular structure and chemical character of the Ecoflex® and PCL matrixes remained unchanged upon the addition of SWCN or 5CB in a weight ratio of 10:0.01 and 10:1, respectively, while molecular interactions appeared between L,D-PLA and 5CB. Moreover, adding oleic acid to pure Ecoflex® as well as the binary and ternary hybrid layers with SWCN and/or 5CB in a weight ratio of Ecoflex®:oleic acid equal to 10:0.3 did not have an influence on the chemical bonding of these materials.

Biopolymer Nanofibers for Nanogenerator Development

The development of nanogenerators (NGs) with optimal performances and functionalities requires more novel materials. Over the past decade, biopolymer nanofibers (BPNFs) have become critical sustainable building blocks in energy-related fields because they have distinctive nanostructures and properties and can be obtained from abundant and renewable resources. This review summarizes recent advances in the use of BPNFs for NG development. We will begin by introducing various strategies for fabricating BPNFs with diverse structures and performances. Then, we will systematically present the utilization of polysaccharide and protein nanofibers for NGs. We will mainly focus on the use of BPNFs to generate bulk materials with tailored structures and properties for assembling of triboelectric and piezoelectric NGs. The use of BPNFs to construct NGs for the generation of electricity from moisture and osmosis is also discussed. Finally, we illustrate our personal perspectives on several issues that require special attention with regard to future developments in this active field.

Expecting the unexpected: high pressure crystallization significantly boosts up triboelectric outputs of microbial polyesters

Polyhydroxybutyrate (PHB) with special wrinkled spherulites enables significant improvement in triboelectric outputs of the microbial polyester.

Research of Binary and Ternary Composites Based on Selected Aliphatic or Aliphatic-Aromatic Polymers, 5CB or SWCN Toward Biodegradable Electrodes

The main goal of this paper was to study the optical, electrical, and thermal properties of hybrid composites based on biodegradable polymers (L,D-poly(lactic acid), polycaprolactone or Ecoflex®), single walled carbon nanotubes (SWCN), and 4'-pentyl-4-biphenylcarbonitrile (5CB). The biodegradable polymers' binary and ternary compositions were analyzed in detail by ultraviolet and visible (UV-Vis) spectroscopy taking into consideration their chemical structure and interactions with 5CB and SWCN. Differential scanning calorimetry (DSC) studies of the created hybrid layers showed thermal stability and changes in glass transition temperature and melting point in comparison to neat polymers, depending on the chemical structure of the polymer used and the type of composition. Morphology of the created layers were investigated by atomic force and polarizing microscopy. The static contact angle measurements of a water drop showed that all of the neat polymer layers were hydrophobic with angle values ranging from 108° to 115°. In addition, in the case of the Ecoflex layers, both with and without additives, a rapid sorption of the deposited water drop was observed. Finally, a simple device with poly(ethylene terephthalate) (PET)/indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/poly [[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl ]] (PTB7) : [6,6]-phenyl-C71-butyric acid methyl ester (PC70BM)/Ag/biodegradable polymer:SWCN architecture was constructed and tested using an infrared (IR) thermographic camera to investigate the surface defects on the created hybrid layers. Increasing the SWCN admixture from 0.01 to 0.5% significantly improved the conductivity only in the case of L,D-poly(lactic acid):SWCN (10:0.5), for which above 5 V, a current with a resistance of 3030.7 Ω could be measured. In order to use the created layers as flexible electrodes, the first experiments were carried out with an admixture of SWCN and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) as conductive compounds.

Theoretical and Experimental Investigations of a Pseudo-Magnetic Levitation System for Energy Harvesting

The paper presents an analytical, numerical and experimental analysis of the special designed system for energy harvesting. The harvester system consists of two identical magnets rigidly mounted to the tube's end. Between them, a third magnet is free to magnetically levitate (pseudo-levitate) due to the proper magnet polarity. The behaviour of the harvester is significantly complicated by a electromechanical coupling. It causes resonance curves to have a distorted shape and a new solution from which the recovered energy is higher is observed. The Harmonic Balance Method (HBM) is used to approximately describe the response and stability of the mechanical and electrical systems. The analytical results are verified by a numerical path following (continuation) method and experiment test with use of a shaker. The influence of harvester parameters on the system response and energy recovery near a main resonance is studied in detail.