Comparison of methods for following alkaline phosphatase catalysis: spectrophotometric versus amperometric detection

Research advances and applications of biosensing technology for the diagnosis of pathogens in sustainable agriculture

Plant diseases significantly impact the global economy, and plant pathogenic microorganisms such as nematodes, viruses, bacteria, fungi, and viroids may be the etiology for most infectious diseases. In agriculture, the development of disease-free plants is an important strategy for the determination of the survival and productivity of plants in the field. This article reviews biosensor methods of disease detection that have been used effectively in other fields, and these methods could possibly transform the production methods of the agricultural industry. The precise identification of plant pathogens assists in the assessment of effective management steps for minimization of production loss. The new plant pathogen detection methods include evaluation of signs of disease, detection of cultured organisms, or direct examination of contaminated tissues through molecular and serological techniques. Laboratory-based approaches are costly and time-consuming and require specialized skills. The conclusions of this review also indicate that there is an urgent need for the establishment of a reliable, fast, accurate, responsive, and cost-effective testing method for the detection of field plants at early stages of growth. We also summarized new emerging biosensor technologies, including isothermal amplification, detection of nanomaterials, paper-based techniques, robotics, and lab-on-a-chip analytical devices. However, these constitute novelty in the research and development of approaches for the early diagnosis of pathogens in sustainable agriculture.

Electrochemical Detection and Capillary Electrophoresis: Comparative Studies for Alkaline Phosphatase (ALP) Release from Living Cells

Alkaline phosphatase (ALP) is one of the main biomarkers that is clinically detected in bone and liver disorders using optical assays. The electrochemical principle is important because point-of-care testing is increasing dramatically and absorbance techniques hardly compete with the medical revolution that is occurring. The detection of ALP using electrochemical detection is contributing to the integration systems field, and hence enhancing the detection of biological targets for pharmaceutical research and design systems. Moreover, in vitro electrochemical measurements use cost effective materials and simple techniques. Graphite screen-printed electrodes and linear sweep voltammetry were used to optimize the electrochemistry of the enzymatic product p-aminophenol using the enzyme kinetic assay. ALP release from embryonic and cancer cells was determined from adhesion cell culture. Additionally, capillary electrophoresis and colorimetric methods were applied for comparison assays. The resulting assays showed a dynamic range of ALP ranging from 1.5 to 1500 U/L, and limit of detection of 0.043 U/L. This was achieved by using 70 μL of the sample and an incubation time of 10 min at an optimal substrate concentration of 9.6 mM of p-aminophenol phosphate. A significant difference (p < 0.05) was measured between the absorbance assays. This paper demonstrates the advantages of the electrochemical assay for ALP release from cells, which is in line with recent trends in gene expression systems using microelectrode array technologies and devices for monitoring electrophysiological activity.

Overview of Optical and Electrochemical Alkaline Phosphatase (ALP) Biosensors: Recent Approaches in Cells Culture Techniques

Alkaline phosphatase (ALP), which catalyzes the dephosphorylation process of proteins, nucleic acids, and small molecules, can be found in a variety of tissues (intestine, liver, bone, kidney, and placenta) of almost all living organisms. This enzyme has been extensively used as a biomarker in enzyme immunoassays and molecular biology. ALP is also one of the most commonly assayed enzymes in routine clinical practice. Due to its close relation to a variety of pathological processes, ALP's abnormal level is an important diagnostic biomarker of many human diseases, such as liver dysfunction, bone diseases, kidney acute injury, and cancer. Therefore, the development of convenient and reliable assay methods for monitoring ALP activity/level is extremely important and valuable, not only for clinical diagnoses but also in the area of biomedical research. This paper comprehensively reviews the strategies of optical and electrochemical detection of ALP and discusses the electrochemical techniques that have been addressed to make them suitable for ALP analysis in cell culture.

Colorimetric sensing of alkaline phosphatase and α-fetoprotein based on the photoinduced oxidase activity of fluorescein

A simple and inexpensive colorimetric assay for alkaline phosphatase (ALP) and α-fetoprotein (AFP) has been established by the hydrolysis of fluorescein diphosphate (FDP).

Biosensors for plant pathogen detection

Infectious plant diseases are caused by pathogenic microorganisms such as fungi, bacteria, viruses, viroids, phytoplasma and nematodes. Worldwide, plant pathogen infections are among main factors limiting crop productivity and increasing economic losses. Plant pathogen detection is important as first step to manage a plant disease in greenhouses, field conditions and at the country boarders. Current immunological techniques used to detect pathogens in plant include enzyme-linked immunosorbent assays (ELISA) and direct tissue blot immunoassays (DTBIA). DNA-based techniques such as polymerase chain reaction (PCR), real time PCR (RT-PCR) and dot blot hybridization have also been proposed for pathogen identification and detection. However these methodologies are time-consuming and require complex instruments, being not suitable for in-situ analysis. Consequently, there is strong interest for developing new biosensing systems for early detection of plant diseases with high sensitivity and specificity at the point-of-care. In this context, we revise here the recent advancement in the development of advantageous biosensing systems for plant pathogen detection based on both antibody and DNA receptors. The use of different nanomaterials such as nanochannels and metallic nanoparticles for the development of innovative and sensitive biosensing systems for the detection of pathogens (i.e. bacteria and viruses) at the point-of-care is also shown. Plastic and paper-based platforms have been used for this purpose, offering cheap and easy-to-use really integrated sensing systems for rapid on-site detection. Beside devices developed at research and development level a brief revision of commercially available kits is also included in this review.

Generic phosphatase activity detection using zinc mediated aggregation modulation of polypeptide-modified gold nanoparticles

A challenge in the design of plasmonic nanoparticle-based colorimetric assays is that the change in colloidal stability, which generates the colorimetric response, is often directly linked to the biomolecular recognition event. New assay strategies are hence required for every type of substrate and enzyme of interest. Here, a generic strategy for monitoring of phosphatase activity is presented where substrate recognition is completely decoupled from the nanoparticle stability modulation mechanism, which enables detection of a wide range of enzymes using different natural substrates with a single simple detection scheme. Phosphatase activity generates inorganic phosphate that forms an insoluble complex with Zn(2+). In a sample containing a preset concentration of Zn(2+), phosphatase activity will markedly reduce the concentration of dissolved Zn(2+) from the original value, which in turn affects the aggregation of gold nanoparticles functionalized with a designed Zn(2+) responsive polypeptide. The change in nanoparticle stability thus provides a rapid and sensitive readout of the phosphatase activity. The assay is not limited to a particular enzyme or enzyme substrate, which is demonstrated using three completely different phosphatases and five different substrates, and thus constitutes a highly interesting system for drug screening and diagnostics.

Square-wave voltammetry assays for glycoproteins on nanoporous gold

Electrochemical enzyme-linked lectinsorbent assays (ELLA) were developed using nanoporous gold (NPG) as a solid support for protein immobilization and as an electrode for the electrochemical determination of the product of the reaction between alkaline phosphatase (ALP) and p-aminophenyl phosphate (p-APP), which is p-aminophenol (p-AP). Glycoproteins or concanavalin A (Con A) and ALP conjugates were covalently immobilized onto lipoic acid self-assembled monolayers on NPG. The binding of Con A - ALP (or soybean agglutinin - ALP) conjugate to glycoproteins covalently immobilized on NPG and subsequent incubation with p-APP substrate was found to result in square-wave voltammograms whose peak difference current varied with the identity of the glycoprotein. NPG presenting covalently bound glycoproteins was used as the basis for a competitive electrochemical assay for glycoproteins in solution (transferrin and IgG). A kinetic ELLA based on steric hindrance of the enzyme-substrate reaction and hence reduced enzymatic reaction rate after glycoprotein binding is demonstrated using immobilized Con A-ALP conjugates. Using the immobilized Con A-ALP conjugate, the binding affinity of immunoglobulin G (IgG) was found to be 105 nM, and that for transferrin was found to be 650 nM. Minimal interference was observed in the presence of 5 mg mL-1 BSA as a model serum protein in both the kinetic and competitive ELLA. Inhibition studies were performed with methyl D-mannoside for the binding of TSF and IgG to Con A-ALP; IC50 values were found to be 90 μM and 286 μM, respectively. Surface coverages of proteins were estimated using solution depletion and the BCA protein concentration assay.

A gold nanoparticles-based colorimetric assay for alkaline phosphatase detection with tunable dynamic range

In this report, a simple and label-free colorimetric assay was developed for detecting alkaline phosphatase (ALP). Based on the conjugated gold nanoparticle/adenosine triphosphate (AuNP/ATP) sensing system, this assay is highly sensitive and selective. In this system, ATP induces the aggregation of cetyltrimethylammonium bromide (CTAB)-capped AuNPs and ALP stimulates the disaggregation of AuNPs by converting ATP into adenosine through an enzymatic dephosphorylation reaction. Hence, the presence of ALP can be visually observed (gray-to-red color change) and monitored by the shift of the surface plasmon resonance (SPR) absorption band of AuNPs. Furthermore, the dynamic range of the method can be varied by addition of different metal ions (e.g. 100-600unit/L to 5.0-100unit/L and 0.2-20unit/L in the presence of Ca(2+) and Pb(2+), respectively). The feasibility of this sensitive and specific assay with a tunable dynamic range was demonstrated to be consistent even in human serum samples.

Nanoporous gold as a solid support for protein immobilization and development of an electrochemical immunoassay for prostate specific antigen and carcinoembryonic antigen

Nanoporous gold (NPG) was utilized as a support for immobilizing alkaline phosphatase (ALP) conjugated to monoclonal antibodies against either prostate specific antigen (PSA) or carcinoembryonic antigen (CEA). The antibody-ALP conjugates were coupled to self-assembled monolayers of lipoic acid and used in direct kinetic assays. Using the enzyme substrate p-aminophenylphosphate, the product p-aminophenol was detected by its oxidation near 0.1 V (vs. Ag|AgCl) using square wave voltammetry. The difference in peak current arising from oxidation of p-aminophenol before and after incubation with biomarker increased with biomarker concentration. The response to these two biomarkers was linear up to 10 ng mL^-1 for CEA and up to 30 ng mL^-1 for PSA. The effect of interference on the PSA assay was studied using bovine serum albumin (BSA) as a model albumin protein. The effect of interference from a serum matrix was examined for the PSA assay using newborn calf serum. A competitive version of the immunoassay using antigen immobilized onto the NPG surface was highly sensitive at lower antigen concentration. Estimates of the surface coverage of the antibody-ALP conjugates on the NPG surface are presented.

Light triggered detection of aminophenyl phosphate with a quantum dot based enzyme electrode

An electrochemical sensor for p-aminophenyl phosphate (pAPP) is reported. It is based on the electrochemical conversion of 4-aminophenol (4AP) at a quantum dot (QD) modified electrode under illumination. Without illumination no electron transfer and thus no oxidation of 4AP can occur. pAPP as substrate is converted by the enzyme alkaline phosphatase (ALP) to generate 4AP as a product. The QDs are coupled via 1,4-benzenedithiol (BDT) linkage to the surface of a gold electrode and thus allow potential-controlled photocurrent generation. The photocurrent is modified by the enzyme reaction providing access to the substrate detection. In order to develop a photobioelectrochemical sensor the enzyme is immobilized on top of the photo-switchable layer of the QDs. Immobilization of ALP is required for the potential possibility of spatially resolved measurements. Geometries with immobilized ALP are compared versus having the ALP in solution. Data indicate that functional immobilization with layer-by-layer assembly is possible. Enzymatic activity of ALP and thus the photocurrent can be described by Michaelis- Menten kinetics. pAPP is detected as proof of principle investigation within the range of 25 μM-1 mM.

An enzyme immobilized microassay in capillary electrophoresis for characterization and inhibition studies of alkaline phosphatases

A simple and fast dynamically coated capillary electrophoretic method was developed for the characterization and inhibition studies of alkaline phosphatases(EC 3.1.3.1). An inside capillary enzymatic reaction was performed, and hydrolysis of the substrate 4-nitrophenylphosphate to 4-nitrophenol was measured. Fused-silica capillary surface was dynamically modified with polycationic polybrene coating. By reversal of the electroosmotic flow (EOF), analysis time was reduced up to 3 min as the anionic analytes were migrated in the same direction as the EOF. Furthermore, the sensitivity of the method was increased using electroinjection through high-field amplified injection. The baseline separation of 4-nitrophenylphosphate and 4-nitrophenol was achieved by employing 50 mM sodium phosphate as the running buffer (pH 8.5), 0.0025% polybrene, and a constant voltage of -15 kV, and the products were detected at 322 nm. Under the optimized conditions, a good separation with high efficiency was achieved. The new method was applied to study enzyme kinetics and inhibitor screening. K(m) and K(i) values obtained with the new CE method were compared well with the standard spectrophotometric method. Dynamic coating of fused-silica capillary gave fast and reproducible separation of substrate and product. The method can be easily optimized for inhibition studies of other isozymes.

Redox cycling amplified electrochemical detection of DNA hybridization: application to pathogen E. coli bacterial RNA

An electrochemical genosensor in which signal amplification is achieved using p-aminophenol (p-AP) redox cycling by nicotinamide adenine dinucleotide (NADH) is presented. An immobilized thiolated capture probe is combined with a sandwich-type hybridization assay, using biotin as a tracer in the detection probe, and streptavidin-alkaline phosphatase as reporter enzyme. The phosphatase liberates the electrochemical mediator p-AP from its electrically inactive phosphate derivative. This generated p-AP is electrooxidized at an Au electrode modified self-assembled monolayer to p-quinone imine (p-QI). In the presence of NADH, p-QI is reduced back to p-AP, which can be re-oxidized on the electrode and produce amplified signal. A detection limit of 1 pM DNA target is offered by this simple one-electrode, one-enzyme format redox cycling strategy. The redox cycling design is applied successfully to the monitoring of the 16S rRNA of E. coli pathogenic bacteria, and provides a detection limit of 250 CFU μL(-1).

A highly sensitive enzyme-amplified immunosensor based on a nanoporous niobium oxide (Nb2O5) electrode

We report on the development of an enzyme-amplified sandwich-type immunosensor based on a thin gold film sputtered on an anodic nanoporous niobium oxide (Au@Nb(2)O(5)) electrode. The electrocatalytic activity of enzymatically amplified electroactive species and a stable electrode consisting of Au@Nb(2)O(5) were used to obtain a powerful signal amplification of the electrochemical immunobiosensor. The method using this electrochemical biosensor based on an Au@Nb(2)O(5) electrode provides a much better performance than those based on conventional bulk gold or niobium oxide electrodes. Our novel approach does not require any time-consuming cleaning steps to yield reproducible electrochemical signals. In addition, the strong adhesion of gold films on the niobium oxide electrodes offers a very stable substrate during electrochemical biosensing. Cyclic voltammetry measurements indicate that non-specific binding of proteins to the modified Au@Nb(2)O(5) surface is sufficiently low to be ignored in the case of our novel system. Finally, we demonstrated the ability of the biosensor based on an Au@Nb(2)O(5) offering the enhanced performance with a high resolution and sensitivity. Therefore, it is expected that the biosensor based on an Au@Nb(2)O(5) has great potential for highly efficient biological devices.

The detection of alkaline phosphatase using an electrochemical biosensor in a single-step approach

A one-step, single use, disposable Alkaline Phosphatase (ALP) biosensor has been developed. It is based on the detection of phenol produced by an ALP enzymatic reaction. It can operate at 25 °C in a pH 10 medium. It measures ALP of 0–300 IU/L. The permissible concentrations of glucose, ascorbic acid and urea without interference are 10 mM/L, 5 mg/L and 400 mg/L, respectively. Experimental results are compared to those obtained by spectrophotometric measurements in bovine serum. Excellent linearity between the biosensor outputs and the ALP concentrations exists. The agreement between the measurements of this biosensor and the spectrophotometer is also outstanding.

Scanning electrochemical microscopy (SECM) as a tool in biosensor research

Scanning electrochemical microscopy (SECM) is discussed as a versatile tool to provide localized (electro)chemical information in the context of biosensor research. Advantages of localized electrochemical measurements will be discussed and a brief introduction to SECM and its operation modes will be given. Experimental challenges of the different detection modes of SECM and its applicability for different fields in biosensor research are discussed. Among these are the evaluation of immobilization techniques by probing the local distribution of biological activity, the visualization of diffusion profiles of reactants, cofactors, mediators, and products, and the elucidation of (local) kinetic parameters. The combination of SECM with other scanning-probe techniques allows to maximize the information on a given biosensing system. The potential of SECM as a tool in micro-fabrication aiming for the fabrication of microstructured biosensors will be shortly discussed.

Amperometric assay for aldolase activity: antibody-catalyzed ferrocenylamine formation

Screening of new catalysts for aldolase activity is a major task in bioorganic chemistry. For this purpose, fast and convenient methods are required for the detection of the catalysts. We have developed the first amperometric assay for aldol or retro-aldol catalytic activity. A new ferrocene-aldol derivative was synthesized with redox activity significantly different from that of ferrocenylamine. It was shown that the reaction between aldolase antibody 38C2 and a ferrocene-aldol substrate generated free ferrocenylamine, which could be detected and quantified by simple electrochemical measurement. The amperometric assay was applied to perform a Michaelis-Menten analysis of catalytic antibody 38C2 in order to determine the enzymatic kinetic parameters.

An electrochemical on-field sensor system for the detection of compost maturity

A maturity sensor system was developed, based on the combination of three electrically measured parameters, pH, NH(4)(+) concentration, and phosphatase activity in the water extracts of compost samples. One of these parameters, the apparent phosphatase activity in crude test solutions was determined using screen-printed carbon strips (SPCSs) coated with alpha-naphthyl phosphate (alpha-NP) in Nafion film. The phosphatase activity was monitored in connection with differential pulse voltammetry (DPV) with an aliquot (30 microL) of the test solution on SPCS. The phosphatase activity sensor was validated using alkaline phosphatase (ALP) in Tris-HCl buffer (pH 8.0) and acid phosphatase (ACP) in citric acid buffer (pH 5.0). The activity of the spiked enzymes in the water extract of the compost sample could be confirmed with the change of corresponding oxidation peak current signal of the product, alpha-naphthol. The water extracts of compost samples (n=24) collected in various composting days were applied to our compost maturity sensor system, and the conventional germination tests. Using multiple regression analysis, the germination index (GI) was expressed by the multi-linear regression equation consisting of pH, NH(4)(+) concentration, and the phosphatase activity. The calculated GI from the regression equation had a good correlation with the measured GI of the corresponding composts (r=0.873). As a result, we have determined an equation for the determination of the compost stability using our portable sensor system rapidly at the composting site.

Quantitative analysis of enzymatic assays using indoxyl-based substrates

Hydrolysis of indoxyl-based substrates by hydrolytic enzymes is a commonly used semiquantitative detection system that generates a water-insoluble indigo dye which is difficult to quantify. This work describes the quantitative analysis and enzyme kinetics for alkaline phosphatase (AP) and 5-bromo-4-chloro-3-indoxyl phosphate (BCIP) in solution obtained by applying known solubilization methodology from the textiles industry to the enzymatic product. This proposal is based on the reduction of the tetrahalo-indigo blue dye in a basic medium with the aim of generating its aqueous-soluble parent compound termed indigo white, which gives a rich yellow color in solution and is fluorescent. A quantitative ELISA (where a soluble end product is required) is accomplished for first time using BCIP as substrate.

A novel estrogen sensor based on recombinant Arxula adeninivorans cells

A novel yeast cell-based assay was developed for the detection of estrogenic activity in wastewater. Recombinant Arxula adeninivorans strains were engineered to co-express the human estrogen receptor alpha (hERalpha) and a Klebsiella-derived phytase (phyK) reporter gene under the control of an A. adeninivorans-derived glucoamylase (GAA) promoter which had been modified by the insertion of estrogen-responsive elements (EREs). In the presence of estrogenic compounds, hERalpha dimerizes and binds to the estrogen. Reporter gene expression is induced by subsequent binding of the hERalpha-dimer/estrogen complex to estrogen responsive elements (ERE) in the promoter. The insertion of different numbers of EREs in three alternative promoter positions and its effect on reporter gene expression were assessed. In one of the constructs, a detection limit of 5 ng l(-1) and a determination limit of 10 ng l(-1) for 17beta-estradiol-like activity was achieved. The photometric assay used enabled estrogen determination in sewage samples within 30 h.

Flow screen-printed amperometric detection of p-nitrophenol in alkaline phosphatase-based assays

p-Nitrophenyl phosphate is one of the most widely used substrates for alkaline phosphatase in ELISAs because its yellow, water-soluble product, p-nitrophenol, absorbs strongly at 405 nm. p-Nitrophenol is also electroactive; an oxidative peak at 0.97 V (vs. an Ag pseudoreference electrode) is obtained when a bare screen-printed carbon electrode is used. When an amperometric detector was coupled to a flow-injection analysis system the detection limit achieved for p-nitrophenol was 2x10(-8) mol L(-1), almost two orders of magnitude lower than that obtained by measuring the absorbance of the compound. By use of this electrochemical detection method, measurement of 7x10(-14) mol L(-1) alkaline phosphatase was achieved after incubation for 20 min. The feasibility of coupling immunoassay to screen-printed carbon electrode amperometric detection has been demonstrated by performing an ELISA for detection of pneumolysin, a toxin produced by Streptococcus pneumoniae, which causes respiratory infections. The method is simple, reproducible, and much more sensitive than traditional spectrophotometry.

Labeling strategies for bioassays

Different labeling strategies for enzymatic assays and immunoassays are reviewed. Techniques which make use of direct detection of a label, e.g. radioimmunoassays, are discussed, as are techniques in which the label is associated with inherent signal amplification. Examples of the latter, e.g. enzyme-linked immunosorbent assays or nanoparticle-label based assays, are presented. Coupling of the bioassays to chromatographic separations adds selectivity but renders the assays more difficult to apply. The advantages and drawbacks of the different analytical principles, including future perspectives, are discussed and compared. Selected applications from clinical, pharmaceutical, and environmental analysis are provided as examples.

Hydroquinone diphosphate: an alkaline phosphatase substrate that does not produce electrode fouling in electrochemical immunoassays

Hydroquinone diphosphate (HQDP) was synthesized and compared to phenyl phosphate (PP) and 1-naphthyl phosphate (NP) as a substrate for alkaline phosphatase (AP) under electrochemical immunoassay (EIA) conditions. Voltammetric and amperometric experiments showed that electrochemical oxidation of hydroquinone (HQ), which is the AP hydrolysis product of HQDP, did not produce electrode passivation, even with repeated biosensor use. In contrast, phenol and 1-naphthol, the hydrolysis products of PP and NP, respectively, were shown to be irreversibly oxidized on the electrode surfaces, and produced rapid electrode passivation, resulting in complete loss of electrode signal. When employed as AP substrate in an iridium oxide based EIA, HQDP produced significantly larger amperometric responses (117 microA/cm2) compared to PP (31 microA/cm2) and NP (27 microA/cm2). The results presented in this paper show that HQDP is an attractive alternative to commonly used AP substrates such as NP and PP. The substrate shows excellent hydrolytic stability, produces larger amperometric responses (than PP or NP), and does not produce sensor passivation.

Immunoassay for B. globigii spores as a model for detecting B. anthracis spores in finished water

The 2001 anthrax alarm in the US raised concerns about the Nation's preparedness to the threat of bioterrorism, and the demand for early warning systems that might be used in the case of a biological attack continues to grow. Here we develop an ultra-sensitive rapid detection method for B. globigii(BG) spores, the simulant of B. anthracis(BA) spores. BG spores were detected by a bead-based sandwich immunoassay with fluorescence detection. Paramagnetic Dynal beads were used as a solid support, primary antibody was attached to the beads by streptavidin-biotin coupling and the secondary antibody had an alkaline phosphatase (AP) enzyme label. Enzymatic conversion of fluorescein diphosphate (FDP) to fluorescein by AP was measured in real time with lambda(ex)= 490 nm and lambda(em)= 520 nm. The assay was linear from 2.6 x 10(3)-5.6 x 10(5) BG spores mL(-1), and the detection limit was 2.6 x 10(3) spores mL(-1) or 78 spores. All reagent concentrations and incubation times were optimized. The assay time from the moment the spores were introduced to the system was 30 min, and real-time fluorescence detection was done in less than 1 min. Formation of the BG spores-capture beads complex was confirmed by environmental scanning electron microscopy (ESEM). BG spores were detected successfully when doped into Cincinnati tap water to demonstrate the applicability of the developed method to detect the spores in non-buffered media.

Bacillus globigii Bugbeads: A Model Simulant of a Bacterial Spore

Nonpathogenic microorganisms are often used as simulants of biological pathogens during the initial phase of detection method development. While these simulants approximate the size, shape, and cellular organization of the microorganism of interest, they do not resemble its surface protein content, a factor particularly important in methods based on immunorecognition. Here, we develop and detect an artificial bacterial spore--B. globigii (BG) Bugbead-a particle mimicking the antigenic surface of BG spores. Two methods of spore protein extraction were compared both quantitatively (by protein concentration assay) and qualitatively (by SDS-PAGE and Western blot): extraction by mechanical disruption and extraction by chemical decoating. The former method was more efficient in producing more protein and a greater number of antigens. BG Bugbeads were made by conjugating the extracted proteins to 0.8-microm carboxyl-coated polystyrene particles via carbodiimide coupling. BG Bugbeads were successfully detected by a bead-based enzyme-labeled immunoassay with fluorescence detection with a detection limit of 6.9 x 10(3) particles/mL. Formation of the Bugbead-capture bead complex was confirmed by ESEM. The concept of a harmless artificial spore can be applied to developing improved simulants for pathogenic spore-forming microorganisms such as B. anthracis, C. botulinum, and B. cereus, which can to be used for method validation, instrument calibration, and troubleshooting.

The measurement of alkaline phosphatase at nanomolar concentration within 70 s using a disposable microelectrochemical transistor

We report a new approach to the measurement of alkaline phosphatase concentration based on the use of a disposable poly(aniline) microelectrochemical transistor. The measurement is carried out in a two cell configuration in which the poly(aniline) microelectrochemical transistor operates in acid solution and is connected to the alkaline buffer solution containing the analyte by a salt bridge. Disposable microelectrochemical transistors were reproducibly fabricated by electrochemical deposition of poly(aniline) onto photolithographically fabricated gold microband arrays. Using these devices alkaline phosphatase was detected by employing p-aminophenyl phosphate as the substrate for the enzyme and using glucose and glucose oxidase to recycle the p-aminophenol generated upon enzyme catalysed hydrolysis of the phosphate. Recycling the p-aminophenol with glucose and glucose oxidase amplified the detection of alkaline phosphatase approximately tenfold. Using this approach we obtain linear calibration curves for alkaline phosphatase up to 5 nM within 70 s on single use devices.

Enzyme-Amplified Electrochemical Detection of DNA Using Electrocatalysis of Ferrocenyl-Tethered Dendrimer

We have developed a sandwich-type enzyme-linked DNA sensor as a new electrochemical method to detect DNA hybridization. A partially ferrocenyl-tethered poly(amidoamine) dendrimer (Fc-D) was used as an electrocatalyst to enhance the electronic signals of DNA detection as well as a building block to immobilize capture probes. Fc-D was immobilized on a carboxylic acid-terminated self-assembled monolayer (SAM) by covalent coupling of unreacted amine in Fc-D to the acid. Thiolated capture probe was attached to the remaining amine groups of Fc-D on the SAM via a bifunctional linker. The target DNA was hybridized with the capture probe, and an extension in the DNA of the target was then hybridized with a biotinylated detection probe. Avidin-conjugated alkaline phosphatase was bound to the detection probe and allowed to generate the electroactive label, p-aminophenol, from p-aminophenyl phosphate enzymatically. p-Aminophenol diffuses into the Fc-D layer and is then electrocatalytically oxidized by the electronic mediation of the immobilized Fc-D, which leads to a great enhancement in signal. Consequently, the amount of hybridized target can be estimated using the intensity of electrocatalytic current. This DNA sensor exhibits a detection limit of 20 fmol. Our method was also successfully applied to the sequence-selective discrimination between perfectly matched and single-base mismatched target oligonucleotides.

Indirect determination of alkaline phosphatase based on the amperometric detection of indigo carmine at a screen-printed electrode in a flow system

Amperometric analysis of indigo carmine at a bare screen-printed electrode placed in an FIA system is reported. This compound is easily detected at a potential of -0.3 V (vs. Ag pseudo-reference electrode) without observing any fouling of the electrode surface, thus allowing the repetitive use of the same electrode in a reproducible manner (coefficients of variation down to 7% for more than 20 consecutive determinations). A linear range of three orders of magnitude and a limit of detection in the sub-micromolar range were attained for this molecule. Based on these studies, indirect amperometric measurements of alkaline phosphatase (ALP) activity in solution were easily carried out using 3-indoxyl phosphate substrate. Its hydrolysis catalyzed by ALP gave rise to indigo product. This product is insoluble in aqueous solutions but it was easily converted into its soluble parent compound, indigo carmine, by addition of fuming sulfuric acid to the reaction media. Using this approach, we achieved a linear range of more than one order of magnitude and a limit of detection of 1 U/l ALP, for an enzymatic reaction time of 60 min.

A significant increase in both basal and maximal calcineurin activity in the rat pilocarpine model of status epilepticus

This study focused on the effects of status epilepticus on the activity of calcineurin, a neuronally enriched, calcium-dependent phosphatase. Calcineurin is an important modulator of many neuronal processes, including learning and memory, induction of apoptosis, receptor function and neuronal excitability. Therefore, a status epilepticus-induced alteration of the activity of this important phosphatase would have significant physiological implications. Status epilepticus was induced by pilocarpine injection and allowed to continue for 60 min. Brain region homogenates were then assayed for calcineurin activity by dephosphorylation of p-nitrophenol phosphate. A significant status epilepticus-dependent increase in both basal and Mn(2+)-dependent calcineurin activity was observed in homogenates isolated from the cortex and hippocampus, but not the cerebellum. This increase was resistant to 150 nM okadaic acid, but sensitive to 50 microM okadaic acid. The increase in basal activity was also resistant to 100 microM sodium orthovanadate. Both maximal dephosphorylation rate and substrate affinity were increased following status epilepticus. However, the increase in calcineurin activity was not found to be due to an increase in calcineurin enzyme levels. Finally, increase in calcineurin activity was found to be NMDA-receptor activation dependent. The data demonstrate that status epilepticus resulted in a significant increase in both basal and maximal calcineurin activity.