Analytical methods for the determination of mixtures of bisphenols and derivatives in human and environmental exposure sources and biological fluids. A review

Exploring the relationships between exposure levels of bisphenols and phthalates and prostate cancer occurrence

We established an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for simultaneously analyzing the metabolites of bisphenols and phthalates in urine to identify the associations between these exposure levels and prostate cancer (PCa) based on a case-control study. After purifying urine samples with SPE, 18 metabolites were separated on a C18 column, and MS detection was performed. The UPLC-MS/MS method has been proven effective at evaluating bisphenol and phthalate exposure (0.020-0.20 μg/L of the limits of detection, 71.8 %∼119.4 % of recoveries, 0.4 %∼8.2 % of precision). Logistic regression explored the association between exposure level and PCa in 187 PCa cases and 151 controls. The detection rates of bisphenol A (BPA) and most phthalate metabolites were 100 % ranging from 0.06-46.74 and 0.12-899.92 μg/g creatinine, respectively, while the detection rates of other bisphenols and mono-benzyl phthalate (MBzP) are low, ranging from 0 % to 21.85 %. Correlation analysis of the metabolite levels indicated that the exposure sources of BPA, di-ethyl phthalate (DEP), and di(2-ethylhexyl) phthalate (DEHP) were different, and that the exposure sources of di-n-butyl phthalate (DnBP) and di-isobutyl phthalate (DiBP) may differ between two groups. Logistic regression analysis revealed that BPA (OR<0.45 vs ≥1.43 =10.02) and DEHP exposure (OR<21.75 vs ≥45.42 =48.26) increased the risk of PCa.

Influence of UV light, ultrasound, and heat treatment on the migration of bisphenol A from polyethylene terephthalate bottle into the food simulant

This research examined the impacts of ultrasound, UV light, storage time, and temperature on the leaching of bisphenol A (BPA) from polyethylene terephthalate (PET) drinking water bottles in Turkey. The initial phase of the investigation encompassed the quantification of BPA in two distinct brands of bottled water. Samples were extracted by solid- phase extraction (SPE) and analyzed by high performance liquid chromatography with fluorescence detection (HPLC-FLD). According to the results in the first part, the highest BPA levels were found in bottled water. In the second part of the study, 10 to 30 min of ultrasound treatment increased the BPA migration with increased time in simulants. In the first and second weeks of storage at 25 °C, the effect of storage on BPA migration was below the detection limit ( Collapse

Key Words

• Bisphenol A
• Food Simulants
• HPLC-FLD
• PET bottles
• UV light
• Ultrasound

Collapse

MESH Headings

• Polyethylene Terephthalates/chemistry
• Hot Temperature
• Drinking Water/analysis
• Ultraviolet Rays
• Food Contamination/analysis
• Benzhydryl Compounds/analysis
• Food Packaging

Collapse

Grants Collapse

Affiliation(s)

Zana M Abdulazeez Department of Food Science and Quality Control, Faculty of Agricultural Engineering Sciences, University of Sulaimani, Iraq.
Fehmi Yazici Department of Food Engineering, Faculty of Engineering, Ondokuz Mayis University, Samsun, Turkey
Abdurrahman Aksoy Department of Pharmacology and Toxicology, Faculty of Veterinary Medicine, Ondokuz Mayis University, Samsun, Turkey

Collapse

A miniaturized stir bar sorptive dispersive microextraction method for the determination of bisphenols in follicular fluid using a magnetic covalent organic framework

BACKGROUND

Bisphenols, particularly bisphenol A (BPA), are the primary monomers used as additives in the manufacturing of many consumer products. The exposure to these compounds is related to endocrine-disrupting and reproductive effects, among others. For this reason, the development of analytical methods for their determination in biological matrixes is needed to monitor the population exposure to these compounds. Their quantification at ovarian level (i.e., follicular fluid) is interesting for the assessment of the bisphenol content to draw conclusions about infertility problems. However, the background does not meet all requirements by focusing mainly on BPA.

RESULTS

In this work, a miniaturized stir bar sorptive dispersive microextraction (mSBSDME) approach has been developed for the determination of BPA and eight analogues in follicular fluid. In the proposed method, the sample is previously cleaned-up using a zirconia-based solid-phase extraction cartridge, removing proteins and phospholipids, and then subjected to the mSBSDME for the preconcentration of the analytes. For this purpose, a magnetic covalent organic framework was used as sorbent. A Plackett-Burman design was applied to select the significant variables affecting the mSBSDME. Afterwards, the only significant variable (i.e., sorbent amount) was optimized. Under the optimized conditions, the proposed method was properly validated, and satisfactory analytical parameters in terms of linearity (up to 50 ng mL-1), enrichment factors (8.5-14.3), limits of detection in the low ng mL-1 range, and precision (relative standard deviations below 11.5 %) were obtained. Finally, the method was successfully applied to five samples, detecting BPA and other two analogues.

SIGNIFICANCE

This method expands the potential applicability of the mSBSDME to other low-availability complex matrixes, which would otherwise be difficult to analyze. Moreover, it offers a valuable tool for monitoring the female population's exposure to bisphenols with the final aim of evaluating if infertility problems of women might be associated to the exposure to these highly endocrine disrupting compounds.

Enhanced removal of bisphenol S in ozone/peroxymonosulfate system: Kinetics, intermediates and reaction mechanism

The degradation process of bisphenol S (BPS) in ozone/peroxymonosulfate (O3/PMS) system was systematically explored. The results showed that the removal efficiency of BPS by O3 could be significantly improved with addition of PMS. Compared with ozonation alone, the pseudo-first-order constant (kobs) was increased by 2-5 times after adding 400 μM PMS. In O3/PMS system, accelerated removal of BPS was observed under neutral and alkaline conditions. The removal efficiency of BPS reached 100% after 40 s of reaction at pH 7.0, with the kobs of 0.098 s-1. Moreover, Cu2+ had a catalytic effect on the O3/PMS system, because it could catalyze the decomposition of ozone and PMS to produce •OH and SO4•-, respectively. Electron paramagnetic resonance illustrated that •OH and SO4•- were the reactive species in O3/PMS system. Twelve intermediates were identified by mass spectrometry, and the degradation reactions in O3/PMS system mainly included hydroxylation, sulfate addition, polymerization and β-scission. Finally, the toxicity of the products was evaluated by the EOCSAR program. Our results introduce an efficient method for BPS removal and would provide some guidance for the development of O3-based advanced oxidation technology.

Towards the assessment of exposure to bisphenols in everyday items with increased accuracy by the use of integrated calibration method (ICM)-based methodology

The most crucial purpose of the measurement is to obtain a reliable result that reflects the actual qualitative and/or quantitative features of the tested material. The overriding goal of analytical chemistry is to obtain accurate results after compensating of various interference effects as well as non-linear calibration dependence. A new approach based on an integrated calibration method (ICM) supported by H-point standard addition method (HPSAM) has been used to improve the quality of analytical results. The proposed methodological approach was extended using the step-by-step dilution procedure, and five measurement conditions were used to eliminate multiplicative, additive, and non-linear interferences. On this basis, a set of estimations is obtained to improve the quality of the analytical results. The analytical usefulness of the proposed approach was tested on the example of the determination of three compounds from the group of bisphenols (BPs) using the chromatographic technique - HPLC-DAD (high-performance liquid chromatography with diode array detection). Compared to the reference method - fluorescence spectroscopy - the obtained results were characterized by excellent accuracy (RE=3 % in most cases). The developed methodology allowed to carry out a risk assessment on BPA, BPF, and BPS present in samples of shop receipts and canned food. Store clerks have been shown to be particularly vulnerable to PBF and BPS in receipts due to skin permeation (exposure factors were equal to 308.97 µg/g for BPF and 181.89 µg/g for BPS). Consumers should also pay close attention to the BPA found in canned food samples (the average concentration was equal to 20.61 µg/mL, and the tolerable daily intake was exceeded over 165.000 times). The analytical method and the methodological approach were evaluated using the RGB model and the AGREE approach - it was shown that the method can be successfully used for other analytical purposes (the method is White) and is environmentally friendly (Significance=0.63).

Synthesis and characterization of pH-responsive deep eutectic solvent followed by HPLC for trace determination of bisphenol A in water samples

A microextraction based on pH-responsive deep eutectic solvent combined with high-performance liquid chromatography was developed for the separation, preconcentration, and determination of bisphenol A in water samples. Five deep eutectic solvents were prepared using thymol (hydrogen bond acceptor) and 6-, 8-, 9-, 10-, and 12-carbon carboxylic acids (hydrogen bond donor), and were used as extraction solvent. Herein, by alkalinizing the environment, phase transition takes place, and by adding acid, phase separation and extraction of analytes occur simultaneously. Some important parameters on the extraction such as deep eutectic solvent type, molar ratio of deep eutectic solvent components, deep eutectic solvent volume, potassium hydroxide concentration, hydrochloric acid volume, extraction time, and salt addition were optimized. Under the optimum conditions, intra- and interday precisions of the method based on seven replicate measurements of 10 μg L-1 of bisphenol A in water samples were 2.2% and 4.3%, respectively. The analytical performance of the method showed linearity over the concentration of 0.05-50 μg L-1 with the detection limit of 0.02 μg L-1 . The accuracy of the method was confirmed by spiking different concentrations of bisphenol A in real water samples and obtaining relative recoveries in the range of 92.5%-105.2%.

Large-scale biomonitoring of bisphenol analogues and their metabolites in human urine from Guangzhou, China: Implications for health risk assessment

Bisphenol analogues (BPs) are ubiquitous in the environment and have gained significant attention regarding their associated health risks. However, there is a lack of comprehensive biomonitoring data on BPs and their metabolites in human urine. To address this, we conducted a study evaluate the exposure to BPs in the general population of Guangzhou, China. A total of 1440 urine samples were collected from volunteers and analyzed for the presence of BPs and their metabolites after being pooled into 36 groups based on age and gender. The findings revealed the common detection of ten free-form BPs, as well as the urinary metabolites of BPA and BPS, in the pooled urine samples. BPA was the predominant free-form compound, constituting 50% of the total BPs. The primary urinary metabolites of BPA and BPS are BPA-G and BPS-G, respectively, indicating glucuronidation as their primary metabolic pathway. The composition of urinary metabolites of BPA and BPS varied by age and sex, while the concentration of total BPs in urine was not significantly associated with age and sex. Enzymatic hydrolysis yielded a mean amplification of individual BPs concentrations in urine samples ranging from 1.8 times (BPA) to 4.6 times (BPS). Based on the outcomes, it was estimated that conjugated forms accounted for 96.9%, 96.2%, 94.7%, 94.1%, 92.6%, 89.1%, 87.3%, 87.2%, 87.1% and 85.8% of BPP, BPAF, BPZ, BPE, BPAP, BPF, BPA, BPC, BPS and BPF, respectively, in the pooled urine samples. Preliminary risk assessments indicated that the estimated daily intake of BPA was much higher than the latest proposed tolerable daily intake. Due to the unavailability of health-based guideline values for alternative BPs, some of them exhibit daily intakes comparable to BPA, implying that greater attention should be paid to health risks associated with exposure to BPs.

Determination of Parabens and Phenolic Compounds in Dairy Products through the Use of a Two-Step Continuous SPE System Including an Enhanced Matrix Removal Sorbent in Combination with UHPLC-MS/MS

Dairy products can be contaminated by parabens and phenolic compounds from a vast variety of sources, such as packaging and manufacturing processes, or livestock through feed and environmental water. A two-step continuous solid-phase extraction (SPE) and purification methodology was developed here for the determination of both types of compounds. In the first step, a sample extract is passed in sequence through an EMR-lipid sorbent and an Oasis PRiME HBL sorbent to remove fat and preconcentrate the analytes for subsequent detection and quantification by UHPLC-MS/MS. This method enabled the determination of 28 parabens and phenolic contaminant with excellent recovery (91-105%) thanks to the SPE sorbent combination used. The proposed method was validated through the determination of the target compounds, and was found to provide low detection limits (1-20 ng/kg) with only slight matrix effects (0-10%). It was used to analyse 32 different samples of dairy products with different packaging materials. Bisphenol A and bisphenol Z were the two phenolic compounds quantified in the largest number of samples, at concentrations over the range of 24-580 ng/kg, which did not exceed the limit set by European regulations. On the other hand, ethylparaben was the paraben found at the highest levels (33-470 ng/kg).

Toxicity of bisphenol A (BPA) and its derivatives in divers biological models with the assessment of molecular mechanisms of toxicity

The aim of the study was to determine totoxicity of bisphenol A (BPA) and its derivatives (bisphenol S (BPS), bisphenol F (BPF), and tetrabromobisphenol A (TBBPA)) due to its high accumulation in environment. The performed analysis revealed the toxicity of the BPA, BPF, and BPS against Kurthia gibsoni, Microbacterium sp., and Brevundimonas diminuta as the most sensitive, reaching microbial toxic concentrations in the range of 0.018-0.031 mg ∙ L^-1. Moreover, the genotoxicity assay shows the ability of all tested compounds to increase in the β-galactosidase level at the concentration range 7.81-500 µM (in Escherichia coli, PQ37). In turn, the matbolic activation of tested bishpenols has caused the enhacement of the genotoxicity and cytotoxicity effect. Interestingely, the highest phytotoxicity effect was pointed for BPA and TBBPA at the concentrations of 10 mg ∙ L^-1 and 50 mg ∙ L^-1, which cause the inhibition of root growth by 58% and 45%, respectively (especially for S. alba and S. saccharatum). Furthermore, the cytotoxicity analyses show the ability of BPA, BPS, and TBBPA to significantly decrease the metabolic activity of human keratynoctes in vitro after 24 h of treatment at the micromolar concentrations. Simialry, the impact of the certain bisphenols on proliferation-, apoptosis-, and inflammation-related mRNA expression was shown in tested cell line. Summarizing, the presented results have proved that BPA and its derrivatives are able to show high negative effect on certain living orgnisms such as bacteria, plants, and human cells, which is strict related to pro-apoptotic and genotoxic mechanism of action.

Gas chromatography-mass spectrometric determination of bisphenol residues by dispersive solid phase extraction followed by activated carbon spheres cleanup from fish feed samples

Bisphenols are known endocrine disruptors commonly utilized in food packaging and storage materials, which frequently come into touch with multiple food products packed in them. The bisphenols in fish feed and other feed materials for aquatic organisms are harmful. The consumption of such marine foods is hazardous. Hence, the feed of aquatic products needs to be verified for the presence of bisphenols. The present study was focused on developing and validating a rapid, selective, and sensitive method to quantify 11 bisphenols from the fish feed with dispersive solid-phase extraction, which was cleaned by an optimized amount of activated carbon spheres and silylated by N,O-bis(trimethylsilyl)trifluoro acetamide and analyzed by gas chromatography-mass spectrometry. The new method was rigorously tested and verified after carefully tuning various parameters affecting analyte recovery. Limit of detection (LOD) were set at 0.5-5 ng/g and limit of quantification (LOQ) at 1-10 ng/g, respectively, resulting in 95-114% recoveries. Interday and intraday precisions in terms of relative standard deviation were found to be less than 11%. The proposed approach was effectively applied in floating and sinking fish feeds. The obtained results showed that higher concentration of bisphenol A, followed by bisphenol TMC, and bisphenol M at a concentration of 256.10, 159.01, and 168.82 ng/g in floating feed and 88.04, 200.79, and 98.03 ng/g in sinking feed samples, respectively.

Solvent-assisted dispersive micro-solid phase extraction of bisphenols using iron(III) thenoyltrifluoroacetonate complex (Fe(TTA)3) as a new nanostructured sorbent: a proof of concept

In this work, we describe for the first time the use of iron(III) thenoyltrifluoroacetonate complex (Fe(TTA)₃) as a novel sorbent for solvent-assisted dispersive micro-solid phase extraction (SA-dμSPE) of bisphenols from water samples. The extraction procedure is based on the formation of nanoparticles in situ following the rapid injection of a methanolic solution of Fe(TTA)₃ into the stirred aqueous sample. Herein, the synthesis of Fe(TTA)₃ and study of the essential parameters of the preparative procedure are described. The optimized procedure allowed for efficient enrichment of bisphenols from various water samples, chosen as model contaminants and matrix, within 2.5 min. The sorbent was collected by centrifugation, dissolved in methanol, and injected to perform HPLC with spectrophotometric detection. The limits of detection and quantification obtained ranged from 1.0-3.1 and 3.1-7.5 μg L^-1, respectively. Intraday and interday precisions of <7% relative standard deviation (RSD) and <8% RSD with analyte recoveries ranging between 70-117% (103.8% on average) were obtained for the analysis of river water, wastewater treatment plant effluent, and bottled water.

Bisphenol P exposure in C57BL/6 mice caused gut microbiota dysbiosis and induced intestinal barrier disruption via LPS/TLR4/NF-κB signaling pathway

Despite being one of the most world's widely used and mass-produced compounds, bisphenol A (BPA) has a wide range of toxic effects. Bisphenol P (BPP), an alternative to BPA, has been detected in many foods. The effects of BPP dietary exposure on gut microbiota and the intestinal barrier were unclear. We designed three batches of animal experiments: The first studied mice were exposed to BPP (30 µg/kg BW/day) for nine weeks and found that they gained weight and developed dysbiosis of the gut microbiota. The second, using typical human exposure levels (L, 0.3 µg/kg BW/day BPP) and higher concentrations (M, 30 µg/kg BW/day BPP; H, 3000 µg/kg BW/day BPP), caused gut microbiota dysbiosis in mice, activated the Lipopolysaccharide (LPS) /TLR4/NF-κB signaling pathway, triggered an inflammatory response, increased intestinal permeability, and promoted bacterial translocation leading to intestinal barrier disruption. The third treatment used a combination of antibiotics and alleviated intestinal inflammation and injury. This study demonstrated the mechanism of injury and concentration effects of intestinal damage caused by BPP exposure, providing reference data for BPP use and control and yielding new insights for human disease prevention.

Combined Toxic Effects of BPA and Its Two Analogues BPAP and BPC in a 3D HepG2 Cell Model

Bisphenol A (BPA) is one of the most commonly used substances in the manufacture of various everyday products. Growing concerns about its hazardous properties, including endocrine disruption and genotoxicity, have led to its gradual replacement by presumably safer analogues in manufacturing plastics. The widespread use of BPA and, more recently, its analogues has increased their residues in the environment. However, our knowledge of their toxicological profiles is limited and their combined effects are unknown. In the present study, we investigated the toxic effects caused by single bisphenols and by the combined exposure of BPA and its two analogues, BPAP and BPC, after short (24-h) and prolonged (96-h) exposure in HepG2 spheroids. The results showed that BPA did not reduce cell viability in HepG2 spheroids after 24-h exposure. In contrast, BPAP and BPC affected cell viability in HepG2 spheroids. Both binary mixtures (BPA/BPAP and BPA/BPC) decreased cell viability in a dose-dependent manner, but the significant difference was only observed for the combination of BPA/BPC (both at 40 µM). After 96-h exposure, none of the BPs studied affected cell viability in HepG2 spheroids. Only the combination of BPA/BPAP decreased cell viability in a dose-dependent manner that was significant for the combination of 4 µM BPA and 4 µM BPAP. None of the BPs and their binary mixtures studied affected the surface area and growth of spheroids as measured by planimetry. In addition, all BPs and their binary mixtures studied triggered oxidative stress, as measured by the production of reactive oxygen species and malondialdehyde, at both exposure times. Overall, the results suggest that it is important to study the effects of BPs as single compounds. It is even more important to study the effects of combined exposures, as the combined effects may differ from those induced by single compounds.

β-cyclodextrin-functionalized magnetic graphene oxide for the efficient enrichment of bisphenols in milk and milk packaging

In this work, β-cyclodextrin-functionalized magnetic graphene oxide (NiFe₂O₄@GO@β-CD) was synthesized and employed as magnetic solid-phase extraction adsorbent for the extraction of bisphenols before high performance liquid chromatography analysis. The modification of β-cyclodextrin could enhance the adsorption performance of NiFe₂O₄@GO@β-CD towards bisphenols through the host-guest interaction and hydrogen-bond interaction. Under the optimal conditions, good linearities between peak area and concentration of bisphenols (1 - 300 μg L^-1, r ≥ 0.9989) were obtained with the limits of detection (S/N = 3) in the range of 0.050 - 0.10 μg L^-1. The recoveries of bisphenols in milk and milk packaging ranged from 78.0% to 101.6%. Moreover, NiFe₂O₄@GO@β-CD showed stable chemical properties and good reusability with the recoveries of bisphenols remained above 80.0% after 12 MSPE cycles. The adsorption characteristics of NiFe₂O₄@GO@β-CD towards bisphenols fitted well with the pseudo-second-order kinetic model and Langmuir model. The hydrogen-bond interaction, π-π interaction, host-guest interaction and electrostatic interaction between sorbent and bisphenols played important role during the adsorption process. The developed method showed potential applications for the analysis of trace bisphenols in milk and milk packaging.

Contribution of Reliable Chromatographic Data in QSAR for Modelling Bisphenol Transport across the Human Placenta Barrier

Regulatory measures and public concerns regarding bisphenol A (BPA) have led to its replacement by structural analogues, such as BPAF, BPAP, BPB, BPF, BPP, BPS, and BPZ. However, these alternatives are under surveillance for potential endocrine disruption, particularly during the critical period of fetal development. Despite their structural analogies, these BPs differ greatly in their placental transport efficiency. For predicting the fetal exposure of this important class of emerging contaminants, quantitative structure-activity relationship (QSAR) studies were developed to model and predict the placental clearance indices (CI). The most usual input parameters were molecular descriptors obtained by modelling, but for bisphenols (BPs) with structural similarities or heteroatoms such as sulfur, these descriptors do not contrast greatly. This study evaluated and compared the capacity of QSAR models based either on molecular or chromatographic descriptors or a combination of both to predict the placental passage of BPs. These chromatographic descriptors include both the retention mechanism and the peak shape on columns that reflect specific molecular interactions between solute and stationary and mobile phases and are characteristic of the molecular structure of BPs. The chromatographic peak shape such as the asymmetry and tailing factors had more influence on predicting the placental passage than the usual retention parameters. Furthermore, the QSAR model, having the best prediction capacity, was obtained with the chromatographic descriptors alone and met the criteria of internal and cross validation. These QSAR models are crucial for predicting the fetal exposure of this important class of emerging contaminants.

Adverse (geno)toxic effects of bisphenol A and its analogues in hepatic 3D cell model

Bisphenol A (BPA) is one of the most widely used and versatile chemical compounds in polymer additives and epoxy resins for manufacturing a range of products for human applications. It is known as endocrine disruptor, however, there is growing evidence that it is genotoxic. Because of its adverse effects, the European Union has restricted its use to protect human health and the environment. As a result, the industry has begun developing BPA analogues, but there are not yet sufficient toxicity data to claim that they are safe. We investigated the adverse toxic effects of BPA and its analogues (BPS, BPAP, BPAF, BPFL, and BPC) with emphasis on their cytotoxic and genotoxic activities after short (24-h) and prolonged (96-h) exposure in in vitro hepatic three-dimensional cell model developed from HepG2 cells. The results showed that BPFL and BPC (formed by an additional ring system) were the most cytotoxic analogues that affected cell viability, spheroid surface area and morphology, cell proliferation, and apoptotic cell death. BPA, BPAP, and BPAF induced DNA double-strand break formation (γH2AX assay), whereas BPAF and BPC increased the percentage of p-H3-positive cells, indicating their aneugenic activity. All BPs induced DNA single-strand break formation (comet assay), with BPAP (≥0.1 μM) being the most effective and BPA and BPC the least effective (≥1 μM) under conditions applied. The results indicate that not all of the analogues studied are safer alternatives to BPA and thus more in-depth research is urgently needed to adequately evaluate the risks of BPA analogues and assess their safety for humans.

Comparison of toxicokinetic properties of eleven analogues of Bisphenol A in pig after intravenous and oral administrations

Due to the restrictions of its use, Bisphenol A (BPA) has been replaced by many structurally related bisphenols (BPs) in consumer products. The endocrine disrupting potential similar to that of BPA has been described for several bisphenols, there is therefore an urgent need of toxicokinetic (TK) data for these emerging BPs in order to evaluate if their internal exposure could increase the risk of endocrine disruption. We investigated TK behaviors of eleven BPA substitutes (BPS, BPAF, BPB, BPF, BPM, BPZ, 3-3BPA, BP4-4, BPAP, BPP, and BPFL) by intravenous and oral administrations of mixtures of them to piglets and serial collection of blood over 72 h and urine over 24 h, to evaluate their disposition. Data were analyzed using nonlinear mixed-effects modeling and a comparison was made with TK predicted by the generic model HTTK package. The low urinary excretion of some BPs, in particular BPM, BPP and BPFL, is an important aspect to consider in predicting human exposure based on urine biomonitoring. Despite their structural similarities, for the same oral dose, all BPA analogues investigated showed a higher systemic exposure (area under the plasma concentration-time curve (AUC) of the unconjugated Bisphenol) than BPA (2 to 4 fold for 3-3BPA, BPAF, BPB and BPZ, 7-20 fold for BP4-4, BPAP, BPP, BPFL, BPF and BPM and 150 fold for BPS) due mainly to a considerable variation of oral bioavailability (proportion of BP administered by oral route that attains the systemic circulation unchanged). Given similarities in the digestive tract between pigs and humans, our TK data suggest that replacing BPA with some of its alternatives, particularly BPS, will likely lead to higher internal exposure to potential endocrine disruptive compounds. These findings are crucial for evaluating the risk of human exposure to these emerging BPs.

Smart Portable Device Based on the Utilization of a 2D Disposable Paper Stochastic Sensor for Fast Ultrasensitive Screening of Food Samples for Bisphenols

Since the determination of the high toxicity of bisphenol A, alternative structures for bisphenols have been synthesized, resulting in bisphenols C, E, F, S, and Z. These bisphenols have replaced bisphenol A in plastic bottles, toys, and cans used for preserving food. Later, the toxicity and negative effects of all of these bisphenols on people's health were proven. Therefore, there is a need for a fast ultrasensitive screening method that is able to detect the presence of these bisphenols in any condition directly from food samples. This paper presented a disposable device based on the utilization of a 2D disposable paper stochastic sensor for the fast ultrasensitive screening of food samples for bisphenols A, C, E, F, S, and Z. The 2D disposable sensor was obtained by the deposition of graphene and silver nanolayers on paper using cold plasma. Furthermore, the active side of the sensor was modified using 2,3,7,8,12,13,17,18-octaethyl-21H,23H Mn porphyrin. The limits of quantification of these bisphenols were 1 fmol L^-1 for bisphenols C and E, 10 fmol L^-1 for bisphenols A and F, 10 pmol L^-1 for bisphenol S, and 1 pmol L^-1 for bisphenol Z. The recoveries of these bisphenols in milk, canned fruits, vegetables, and fish were higher than 99.00% with RSD (%) values lower than 1.50%.

Human dietary exposure to bisphenol-diglycidyl ethers in China: Comprehensive assessment through a total diet study

Despite the widespread use of bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE) in various consumer products as protective plasticizer, studies on human dietary exposure to these compounds are scare. In this study, nine bisphenol diglycidyl ethers (BDGEs) including BADGE, BFDGE, and seven of their derivatives were determined in the Chinese adult population based on composite dietary samples collected from the sixth (2016-2019) China total diet study (TDS). Contamination level of nine BDGEs was determined in 288 composite dietary samples from 24 provinces in China. BADGE·2H₂O and BADGE are the most frequently detected and BADGE·2H₂O presented the highest mean concentration (2.402 μg/kg). The most contaminated food composite is meats, with a mean ∑₉BDGEs of 8.203 μg/kg, followed by aquatic products (4.255 μg/kg), eggs (4.045 μg/kg), and dairy products (3.256 μg/kg). The estimated daily intake (EDI) of ∑₉BDGEs based on the mean and 95th percentile concentrations are 121.27 ng/kg bw/day and 249.71 ng/kg bw/day. Meats, eggs, and aquatic products are the main source of dietary exposure. Notably, beverages and water, alcohols were the main contributors of dietary exposure to BADGE and BADGE·2H₂O, followed by animal-derived foods. Dietary exposure assessment demonstrated that human dietary BDGEs do not pose risks to general population based on the mean and 95th percentile hazard index with < 1. This is the first comprehensive national dietary exposure assessment of BDGEs in Chinese general population.

Application of a modified MWCNT-based d-µSPE procedure for determination of bisphenols in soft drinks

Herein, a facile dispersive micro-solid phase extraction (d-µSPE) procedure using carboxylated multi-walled carbon nanotubes modified with silver nanoparticles (Ag/MWCNTs-COOH) was successfully developed for the adsorption and subsequent determination of low levels of two well-known contaminants, namely bisphenol A and S (BPA and BPS) in water and soft drink samples. The detection and measurement of the above-mentioned compounds were performed by HPLC-UV instrument. The applied d-µSPE procedure has several advantages such as rapidity, high degree of sensitivity, precision and efficiency. A combination of polar/non-polar interactions seems to play a key role in the adsorption process. Under the optimized conditions, the calibration curves were linear over the concentration range of 1-500 µg/L for the both targets. The practical limit of quantifications (LOQ) for the both analytes were determined to be 1.0 µg/L. The average relative recoveries obtained from the fortified samples varied between 92 and 110% with the relative standard deviations (RSD%) of 2.9-9.5%.

Metabolic profiling of bisphenol A diglycidyl ether in vitro and in vivo

Bisphenol A diglycidyl ethers (BADGE) is one class of human-made chemicals, and it is one of the most widely used raw materials for epoxy resins. As an active compound, BADGE undergoes biotransformation in vitro and in vivo. However, there is a limited understanding of the biotransformation of BADGE and toxicity studies on transformation products. We conducted comprehensive research on the metabolic transformation of BADGE in vitro and in vivo. The results showed that 12 metabolites and 7 metabolites were identified in vitro and in vivo, respectively. Four biotransformation products, including M1 (hydrolysis), M3 (dehydroxylation), M10 (carboxylation), and M11 (glucose conjugation), can be found in both in vitro and in vivo samples. The main metabolic pathways were hydroxylation, carboxylation, cysteine (Cys) conjugation, and glucose conjugation. Besides, our results suggested the existence of metabolic differences in BADGE between species and gender. Further, we investigated toxicities of BADGE metabolites in-silico. Importantly, some hydrolysis (M1, M2), hydroxylation (M7), and oxidation (M8) products showed similar or even higher potential toxicity than BADGE depending on the endpoint. These results enrich the biotransformation profiles of BADGE and provide useful information for understanding its biotransformation in humans and a reference for the comprehensive assessment for human health risk.

Acute and Chronic Toxicity of Binary Mixtures of Bisphenol A and Heavy Metals

Bisphenol A (BPA) and heavy metals are widespread contaminants in the environment. However, the combined toxicities of these contaminants are still unknown. In this study, the bioluminescent bacteria Vibrio qinghaiensis Q67 was used to detect the single and combined toxicities of BPA and heavy metals, then the joint effects of these contaminants were evaluated. The results show that chronic toxicities of chromium (Cr), cadmium (Cd), lead (Pb), arsenic (As), mercury (Hg), nickel (Ni), and BPA were time−dependent; in fact, the acute toxicities of these contaminants were stronger than the chronic toxicities. Furthermore, the combined toxicities of BPA and heavy metals displayed BPA + Hg > BPA + Cr > BPA + As > BPA + Ni > BPA + Pb > BPA + Cd in the acute test and BPA + Hg > BPA + Cd > BPA + As > BPA + Cd in the chronic test, which suggested that the combined toxicity of BPA and Hg was stronger than that of other mixtures in acute as well as chronic tests. Additionally, both CA and IA models underestimated the toxicities of mixtures at low concentrations but overestimated them at high concentrations, which indicates that CA and IA models were not suitable to predict the toxicities of mixtures of BPA and heavy metals. Moreover, the joint effects of BPA and heavy metals mainly showed antagonism and additive in the context of acute exposure but synergism and additive in the context of chronic exposure. Indeed, the difference in the joint effects on acute and chronic exposure can be explained by the possibility that mixtures inhibited cell growth and luminescence in chronic cultivation. The chronic toxicity of the mixture should be considered if the mixture results in the inhibition of the growth of cells.

Exposure of preschool-aged children to highly-concerned bisphenol analogues in Nanjing, East China

Bisphenol analogues (BPs) have already attracted wide concern owing to the environmental and health risks they pose. The exposure pathways and health risk of preschool-aged children to BPs, however, are still poorly understood. In this study, we choose population survey with 184 preschool-age children from a suburb of Nanjing, eastern China, further reveal the internal and external exposures concentrations, distribution profiles, potential sources and eventually assess health risk of preschool-age children to eight kinds of BPs. The results verify that the 95th percentile (P95) concentrations of Ʃ8BPs ranged from 0.27 to 41.6 ng/mL, with a median concentration of 7.83 ng/mL in the urine samples. BPA, and BPF were the predominant BPs in urine, accounting for 67.3%, and 18.0% of Ʃ8BPs. The urine-based estimated daily intake (EDI) of Ʃ8BPs was 187 ng/kg body weight/day. Similarly, BPA, and BPF were the main BPs in the environmental exposure sources, accounting for 80.8%, and 11.7% of the total BPs. Moreover, the total external exposure dose of Ʃ8BPs via the environmental sources was 68.1 ng/kg body weight/day, including BPA (56 ng/kg body weight/day), BPF (7.68 ng/kg body weight/day) and BPB (2.62 ng/kg body weight/day). The oral intake of drinking water and food (vegetables and rice) was the main exposure pathways of BPs in preschool-age children. Furthermore, the hazard quotient (HQ) of BPs have been evaluated and the results show no occurrence of high risk. Additionally, the urine-based EDI was significantly higher than the total external exposure dose, suggesting the existence of other pathways of BP exposure to be further explored. To the best of our knowledge, this is the first study to conduct both an internal and external exposure assessment of BPs.

Bisphenol A replacement chemicals, BPF and BPS, induce protumorigenic changes in human mammary gland organoid morphology and proteome

SignificanceBisphenol A (BPA), found in many plastic products, has weak estrogenic effects that can be harmful to human health. Thus, structurally related replacements-bisphenol S (BPS) and bisphenol F (BPF)-are coming into wider use with very few data about their biological activities. Here, we compared the effects of BPA, BPS, and BPF on human mammary organoids established from normal breast tissue. BPS disrupted organoid architecture and induced supernumerary branching. At a proteomic level, the bisphenols altered the abundance of common targets and those that were unique to each compound. The latter included proteins linked to tumor-promoting processes. These data highlighted the importance of testing the human health effects of replacements that are structurally related to chemicals of concern.

Capillary electrophoresis-mass spectrometry analysis of bisphenol A and its analogues in bottled tea beverages with dynamic pH focusing

A simple and sensitive method for the determination of bisphenol A and its analogues at the ng/mL level in bottled tea beverages is presented. This method utilized a dynamic pH junction to focus the analyte into a more concentrated zone, based on the electrophoretic mobility difference of analytes in the sample matrix and background electrolytes in capillary electrophoresis coupled to mass spectrometry (CE-MS). The optimised analyte focusing led to enhanced signal detection with average peak heights for five bisphenols of 53-170 folds higher than conventional injections. Under optimised conditions, the method showed good linearity in the range of 0.1-100 ng/mL, excellent limits of detection (0.03-0.04 ng/mL), good analyte recovery (80.3-118.1%) with acceptable relative standard deviations (<12%). The limits of quantifications were below the maximum permissible content of bisphenol A set by the European Commission for this product. This method was used to quantitatively analyse bisphenols in six different kinds of bottled tea beverages, making it a promising tool for practical applications.

Identification of bisphenols and derivatives in greenhouse dust as a potential source for human occupational exposure

Bisphenol A (BPA) and alternative bisphenols are widely used in the industrial production of polycarbonates and resin polymers. Adverse effects on human health have been described for BPA and owing to the structural similarity of alternative bisphenols and derivatives, a similar toxicity profile is expectable. Dust can act as a sink for bisphenols owing to the large surface area to mass ratio. Human risk exposure to bisphenols via indoor dust has been widely assessed in the last decade. The environmental conditions inside greenhouses, among other factors, facilitate that chemicals are released from greenhouse building materials to dust. This study aims to explore for the first time the potential of greenhouse dust as a new source of bisphenols for human exposure. For this purpose, a supramolecular solvent-based method was applied to the extraction of twenty-one bisphenols from greenhouse dust, prior to their determination by liquid chromatography–tandem mass spectrometry. Nineteen bisphenols were found in the five greenhouse dust samples analysed, with concentrations ranging from 5275 ng g⁻¹ (BPA) to 0.25 ng g⁻¹ (trichlorobisphenol A). The average daily dose (ADD) via dust ingestion for bisphenol compounds was calculated, in order to estimate the occupational exposure for inadvertent dust ingestion. Despite the calculated ADD value for BPA (47.81 ng kg⁻¹ day⁻¹) being below the tolerable daily intake proposed by EFSA (4·10³ ng kg⁻¹ day⁻¹), this value was considerably higher than those previously reported for indoor dust, which brings to light the importance of considering greenhouse dust as bisphenols source of exposure for greenhouse workers.

Application of Microgel as a Sorbent for Bisphenol Analysis in Liquid Food Samples

Bisphenols are well-known endocrine disruptors that can easily migrate from plastic and can containers to food. Due to the complicated matrix and ultra-low concentrations of bisphenols in food, samples require extensive preparation before instrumental analysis. In this paper, an environmental sensitive microgel was employed as a sorbent for the preconcentration of four bisphenols, bisphenol A (BPA), bisphenol B (BPB), bisphenol E (BPE) and bisphenol F (BPF), from liquid food samples. Liquid chromatography with fluorescence detection (LC-FLD) was used for the quantification of bisphenols. By applying microgel solid-phase extraction procedure, the limits of detections achieved in liquid food samples can be lowered to 0.9 µg·L−1 for BPF and BPA, 2.3 µg·L−1 for BPE and 2.9 µg·L−1 for BPB. Only 5 mg of microgel was sufficient to achieve good recoveries (70.5–109%) with precision (RSD 0.21–5.01%, n = 3) for different analyzed liquid food samples spiked at concentration levels of 50 µg·L−1. In five out of twelve of the analyzed samples (pineapple, mandarin, peach, mushroom and pickles), they were contaminated with BPA, and the determined concentration was in the range of 6.2–22 µg·L−1; however, these results are below the specific migration limit (SML) set for BPA (50 µg·kg−1).

Binding and activity of bisphenol analogues to human peroxisome proliferator-activated receptor β/δ

Several studies have indicated metabolic function disruption effects of bisphenol analogues through peroxisome proliferator-activated receptor (PPAR) alpha and gamma pathways. In the present study, we found for the first time that PPARβ/δ might be a novel cellular target of bisphenol analogues. By using the fluorescence competitive binding assay, we found seven bisphenol analogues could bind to PPARβ/δ directly, among which tetrabromobisphenol A (TBBPA, 18.38-fold) and tetrachlorobisphenol A (TCBPA, 12.06-fold) exhibited stronger binding affinity than bisphenol A (BPA). In PPARβ/δ-mediated luciferase reporter gene assay, the seven bisphenol analogues showed transcriptional activity toward PPARβ/δ. Bisphenol AF (BPAF), bisphenol F (BPF) and bisphenol B (BPB) even showed higher transcriptional activity than BPA, while TBBPA and TCBPA showed comparable activity with BPA. Moreover, in human liver HL-7702 cells, the bisphenol analogues promoted the expression of two PPARβ/δ target genes PDK4 and ANGPTL4. Molecular docking simulation indicated the binding potency of bisphenol analogues to PPARβ/δ might depend on halogenation and hydrophobicity and the transcriptional activity might depend on their binding affinity and hydrogen bond interactions. Overall, the PPARβ/δ pathway may provide a new mechanism for the metabolic function disruption of bisphenol analogues, and TBBPA and TCBPA might exert higher metabolic disruption effects than BPA via PPARβ/δ pathway.

New low viscous hydrophobic deep eutectic solvents for the ultrasound-assisted dispersive liquid-liquid microextraction of endocrine-disrupting phenols in water, milk and beverage

In the present work, several new hydrophobic deep eutectic solvents (HDESs) were prepared with quaternary ammonium salts as hydrogen bond acceptors (HBAs) and salicylate esters as hydrogen bond donors (HBDs). Then, the obtained HDESs were used as extraction solvents to establish an ultrasound-assisted dispersive liquid-liquid microextraction method combined with high-performance liquid chromatography-ultraviolet detection technique for the determination of four endocrine-disrupting phenols (EDPs) compounds. One of the obtained HDESs composed of tetrabutylammonium chloride (N₄₄₄₄Cl) and methyl salicylate possessed a viscosity of 89.28 mPa•s lower than most reported ionic HDESs (>200 mPa•s), and the low viscous HDES was selected as the optimal extraction solvent. Several key parameters affecting the extraction efficiency were investigated, including the type and volume of HDES, ultrasound time, sample solution pH and salt addition. Under the optimized experimental conditions, the proposed method had good coefficients of determination (R² > 0.9976) in the linear range of 0.5-400 µg•L^-1, the limits of quantification and limits of detection respectively were 0.5-2.5 µg•L^-1 and 0.25-1 µg•L^-1, and the recoveries were in the range of 81.79-109.82%. Finally, the method was used for the preconcentration and determination of EDPs in different samples, including bottled water, tea beverage and milk.

Accumulation and passive sampling of bisphenol analogues using triolein-embedded cellulose acetate membrane in waters

Bisphenol analogues (BPs) are emerging contaminants that have been widely detected in water environments. The presence of substituted hydrophilic and hydrophobic groups in the molecule may lead to unclear performance in passive sampling. This study tested the accumulation capacity and passive sampling of fifteen BPs in a triolein-embedded cellulose acetate membrane (TECAM) passive sampler. In a dynamic accumulation experiment, twelve hydrophobic BPs accumulated in the TECAM with concentrations ranging from 251 ng g^-1 to 6283 ng g^-1, and three hydrophilic BPs did not accumulate during the 72 h exposure duration. BPs accumulations were determined by the hydrophilic and hydrophobic substituent groups in molecule structures. The estimated passive sampling parameters showed correlations to both the log K_ow values and chemical structures, and compared to other contaminants, such as organophosphorus flame retardants. Environmental factors, including flow rate, temperature, salinity, and pH, that affect the accumulation of BPs in the TECAM were tested, and the flow rate was found to be an important factor affecting the uptake rate. The isotropic exchange kinetics for BPs in the TECAM were verified, and the results indicated that BPs can be calibrated with performance reference compounds (PRCs) in field applications. Finally, a field deployment of TECAM in river waters successfully estimated the time-weighted concentrations of two hydrophobic BPs. To address the inherent weaknesses of TECAM in sampling hydrophilic and moderately hydrophobic BPs, future studies should explore alternative passive samplers, such as hydrophilic-lipophilic balance sorbent-embedded cellulose acetate membranes, to sample BPs in surface waters.

Development of a high-performance liquid chromatography method to assess bisphenol F levels in milk

Bisphenol F (BPF) is a bisphenol A (BPA) analogue. As an endocrine disruptor, BPF shows a similar BPA hormonal activity and greater endocrine effects. To assess BPF levels in milk a selective method based on solvent extraction with acetonitrile, solid-phase extraction (SPE), high-performance liquid chromatography with fluorescence detection (HPLC-FD) system, was developed. The method showed high recovery values (from 97.60 to 107.16%), and good detection and quantification limits (LOD=0.03 μg/L; LOQ=0.1 μg/L). To validate the analytical method, quantitative analyses of n.20 milk samples of whole milk were preliminarily carried out applying a monitoring system based on the control of different stages of pasteurized whole milk processing at a dairy company. The proposed method is simple, sensitive, and might be suitable to detect BPF residues in milk processing. At the dairy company, the occurrence of BPF levels ranging from Collapse

Key Words

• Bisphenol F
• High-performance liquid chromatography method
• Milk

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Serena Santonicola Department of Medicine and Health Sciences, University of Molise, Campobasso
Maria Carmela Ferrante Department of Veterinary Medicine and Animal Production, University of Naples, Italy
Giampaolo Colavita Department of Medicine and Health Sciences, University of Molise, Campobasso
Raffaelina Mercogliano Department of Veterinary Medicine and Animal Production, University of Naples, Italy

Collapse

Recent advances in analysis of bisphenols and their derivatives in biological matrices

Biomonitoring is a very useful tool to evaluate human exposure to endocrine-disrupting compounds (EDCs), like bisphenols (BPs), which are widely used in the manufacture of plastics. The development of reliable analytical methods is key in the field of public health surveillance to obtain biomonitoring data to determine what BPs are reaching people's bodies. This review discusses recent methods for the quantitative measurement of bisphenols and their derivatives in biological samples like urine, blood, breast milk, saliva, and hair, among others. We also discuss the different procedures commonly used for sample treatment, which includes extraction and clean-up, and instrumental techniques currently used to determine these compounds. Sample preparation techniques continue to play an important role in the analysis of complex matrices, for liquid matrices the most commonly employed is solid-phase extraction, although microextraction techniques are gaining importance in this field, and for solid samples ultrasound-assisted extraction. The main instrumental techniques used are liquid and gas chromatography coupled with mass spectrometry. Finally, we present data on the main parameters obtained in the validation of the revised methods. This review focuses on various methods developed and applied for trace analysis of bisphenols, their conjugates, halogenated derivatives, and diglycidyl ethers in biological samples to enable the required selectivity and sensitivity. For this purpose, a review is carried out of the most recent relevant publications from 2016 up to present.

Identification of chemicals of emerging concern in urine of Flemish adolescents using a new suspect screening workflow for LC-QTOF-MS

An essential step in human biomonitoring or molecular epidemiology programs is to estimate human exposure to environmental chemicals. Despite significant progress in the capabilities of analytical methods, the number of pollutants and their metabolites keeps increasing continuously. Some of these relatively unknown chemicals of emerging concern (CECs) may pose significant health risks to humans and biota, but remain virtually undetected in traditional HBM-studies. Non-target and suspect screening techniques based on high-resolution mass spectrometry (HRMS) perform the detection and identification of compounds without any a priori compound selection or chemical information and provide a more holistic overview of human exposure. In this study, 50 urine samples (25 female and 25 male) from a larger cohort of the Flemish Environment and Health Study (FLEHS IV, 2016-2020) have been submitted to suspect screening analysis, with the aim of detecting and identifying new CECs. For this purpose, an analytical method has been developed, optimised and evaluated in terms of analytical performance. Satisfactory results were obtained in terms of reproducibility, sensitivity and quality control. Data-mining was performed through the combination of two different workflows. The use of two complementary workflows enhanced the number of identified compounds. As a result, 45 CECs have been identified with a level of confidence ranged between 3 and 1. Most of the identified compounds were metabolisation products, many of which were currently not included in the targeted measurements of FLEHS IV. The identified chemicals and metabolites could be used as candidate biomarkers of exposure in future studies. Overall, the newly developed suspect screening workflow of this pilot study provided complementary and promising results for future HBM-programs.

Chemical contaminants in canned food and can-packaged food: a review

Canning, as a preservation technique, is widely used to extend the shelf life as well as to maintain the quality of perishable foods. During the canning process, most of the microorganisms are killed, reducing their impact on food quality and safety. However, the presence of a range of undesirable chemical contaminants has been reported in canned foods and in relation to the canning process. The present review provides an overview of these chemical contaminants, including metals, polymeric contaminants and biogenic amine contaminants. They have various origins, including migration from the can materials, formation during the canning process, or contamination during steps required prior to canning (e.g. the disinfection step). Some other can-packaged foods (e.g. beverages or milk powder), which are not canned foods by definition, were also discussed in this review, as they have been frequently studied simultaneously with canned foods in terms of contamination. The occurrence of these contaminants, the analytical techniques involved, and the factors influencing the presence of these contaminants in canned food and can-packaged food are summarized and discussed.

Magnet integrated fabric phase sorptive extraction of selected endocrine disrupting chemicals from human urine followed by high-performance liquid chromatography - photodiode array analysis

In current paper, a new advanced modification of fabric phase sorptive extraction is introduced for the first time. This advantageous configuration that integrates the stirring and extraction mechanism into a single sample preparation device was originated by equally considering the beneficial role of the increase of extraction kinetics and more specifically of diffusion on the extraction efficiency of the equilibrium based microextraction techniques and the need for integrating and unite processes for better promotion and implementation of the principles of Green Analytical Chemistry. The resulted magnet integrated fabric phase sorptive extraction (MI-FPSE) device was the spearhead to develop a new analytical methodology for the determination of selected very common endocrine disrupting chemicals as model analytes in human urine by high-performance liquid chromatography-photodiode array analysis. More specifically, the sol-gel Carbowax 20 M coated on hydrophilic cellulose fabric substrate, MI-FPSE device was efficiently employed for the establishment of a new extraction protocol before the chromatographic determination. The sample preparation workflow was methodically optimized in terms of the elution solvent mixture, the volume of the sample, the extraction and the elution time, the stirring speed during the extraction, the ionic strength, and the pH of the sample matrix. The chromatographic separation was performed on a Spherisorb C18 column and a gradient elution program within 14 minutes. Mobile phase consisted of 0.05 ammonium acetate aqueous solution and acetonitrile. The method was validated towards linearity, sensitivity, selectivity, precision, accuracy, and stability. LOD and LOQ ranged between 1.05-1.80 and 3.5-6.0 ng/mL, while %RSD values were found lower than 9.0% in all cases. The method was efficiently applied to the bioanalysis of real samples. All the chosen EDCs were measured at high detection levels. The new MI-FPSE device has demonstrated its performance superiority as a magnet integrated stand-alone extraction device and could be considered as a significant improvement in the field of analytical/bioanalytical sample preparation.

Bisphenols' occurrence in bivalves as sentinel of environmental contamination

Bisphenols are massively used in several manufacture processes such that bisphenol A (BPA) is ubiquitous in environment worldwide. After the implementation of regulations about BPA use, manufacturers have moved their production toward alternative substances structurally similar to it. Unfortunately, BPA analogues, given their structural similarity, exert also similar adverse effects. This review aims to investigate the occurrence of bisphenols (BPs) in bivalve molluscs. In this way, valuable information on the amount of BPs released into the environment in different areas are given. The current research indicates that BPA presence in bivalve molluscs has been investigated in Asia (Indian Ocean and Pacific Ocean), Europe (Mediterranean Sea, Baltic Sea and Atlantic Ocean) and America (Lake Mead, Nevada) with the highest amount of studies reported in bivalves harvested in Asian Coasts. BPA analogues are frequently detected in several matrices and their levels will continuously increase in the environment. Nevertheless, there is a current lack of studies analysing BPs other than BPA in bivalves. Further investigations should be conducted in this direction, in order to assess environmental distribution and the hazard for animals and human health given that seafood consumption could be an important pathway of bisphenols intake.

Comparison of the materno-fetal transfer of fifteen structurally related bisphenol analogues using an ex vivo human placental perfusion model

Regulatory measures and public concerns regarding bisphenol A (BPA) have led to its replacement by a variety of alternatives in consumer products. Due to their structural similarity to BPA, these alternatives are under surveillance, however, for potential endocrine disruption. Understanding the materno-fetal transfer of these BPA-related alternatives across the placenta is therefore crucial to assess prenatal exposure risks. The objective of the study was to assess and compare the placental transfer of a set of 15 selected bisphenols (BPs) (BP 4-4, BPA, BPAF, BPAP, 3-3 BPA, BPB, BPBP, BPC, BPE, BPF, BPFL, BPM, BPP, BPS and BPZ) using the ex vivo human placental perfusion model. The UHPLC-MS/MS method for simultaneous quantification of these BPs in perfusion media, within a concentration range of 0.003-5 μM, was able to measure placenta transfer rates as low as 0.6%-4%. Despite their structural similarities, these BPs differed greatly in placental transport efficiency. The placental transfer rates of BP4-4, BPAP, BPE, BPF, 3-3BPA, BPB, BPA were similar to that of antipyrine, indicating that their main transport mechanism was passive diffusion. By contrast, the placental transfer rates of BPFL and BPS were very limited, and intermediate for BPBP, BPZ, BPC, BPM, BPP and BPAF, suggesting weak diffusional permeability and/or that their passage might involve efflux transport. These placental transfer data will be particularly useful for predicting the fetal exposure of this important class of emerging contaminants.

Development and validation of an ultra performance liquid chromatography-tandem mass spectrometry method for twelve bisphenol compounds in animal feed

Bisphenol compounds (BPs) are a group of environmental contaminants with endocrine-disrupting effects both for humans and animals. The present work developed a sensitive analytical method for the detection of multiple BPs in the animal feed based on ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) with post-column ammonium hydroxide (NH₄OH) infusion. A modified QuEChERS method was incorporated into the extraction and purification processes. The limit of detection (LODs) and quantification (LOQs) for the target BPs were in the ranges of 0.02-0.75 μg kg^-1 and 0.04-0.95 μg kg^-1, respectively. Average recoveries were ranged between 82.6% and 112%. The proposed method was successfully applied to determine the concentrations of BPs in 20 actual feed samples, and the preliminary profiles of BPs in products from local feed factories were obtained. Each sample was simultaneously contaminated with at least 2 to 4 BPs, and bisphenol A (BPA) was the dominant analog of BPs found in animal feed.

Rapid exposure monitoring of six bisphenols and diethylstilbestrol in human urine using fabric phase sorptive extraction followed by high performance liquid chromatography - photodiode array analysis

A novel fabric phase sorptive extraction protocol is developed for rapid exposure monitoring of six bisphenol analogues, including bisphenol A, bisphenol S, bisphenol F, bisphenol E, bisphenol B, bisphenol C, and diethylstilbestrol (DES) from human urine prior to high-performance liquid chromatography-photodiode array analysis. FPSE sample pretreatment protocol ensures the harmonization of the proposed method with the principles of Green Analytical Chemistry (GAC). Among eighteen evaluated FPSE membranes, sol-gel poly (ethylene glycol) (PEG) coated cellulose FPSE membrane resulted in the most efficient extraction. This polar FPSE membrane effectively exploits a number of advantageous features inherent to FPSE including sponge-like porous architecture of the sol-gel sorbent coating, favorable surface chemistry, flexibility and built-in permeability of cellulose fabric substrate, high primary contact surface area for rapid sorbent-analyte interaction, expanded pH, solvent and thermal stability as well as reusability of the FPSE membrane. Optimization was centered on the evaluation of critical parameters, namely the size of the FPSE membrane, the elution solvent mixture, the volume of the sample, the extraction time, the elution time, the kind of the external agitation mechanical stimulus, the ionic strength and the pH of the sample. The chromatographic separation was achieved on a Spherisorb C18 column and a gradient elution program with mobile phase consisted of 0.05 ammonium acetate solution and acetonitrile. The total analysis time was 17.4 min. The developed method was validated in terms of linearity, sensitivity, selectivity, precision, accuracy, stability, and ruggedness. The limits of detection and quantification varied from 0.26-0.62 ng/mL and 0.8-1.9 ng/mL, respectively. The relative recoveries were calculated between 90.6 and 108.8%, while the RSD values were <10% in all cases. The effectiveness of the proposed method was confirmed by its successful implementation in the bioanalysis of real urine samples.

Occurrence, Profiles and Ecological Risk of Bisphenol Analogues in a Municipal Sewage Treatment Plant

Due to the strict control on bisphenol A (BPA) in many countries, bisphenol analogues (BPs) are being widely used as alternative materials to manufacture epoxy resins and polycarbonate plastics, resulting in their occurrence in sewage treatment plants (STPs). In this study, the occurrence and distribution of 7 BPs in a large-scale STP in Beijing China was investigated. Wastewater samples were collected from the influents and effluents of each processing unit, and extracted by solid-phase extraction. Target compounds were quantified by ultra-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS). The total concentrations of seven BPs (ΣBPs) were 400.42 ± 48.12 ng/L in the raw sewage, 438.60 ± 46.50 ng/L in the primary effluent, 17.21 ± 13.12 ng/L in the secondary effluent, and 11.33 ± 4.84 ng/L in the tertiary effluent, respectively. Bisphenol S (BPS) and BPA were the predominant congener in raw sewage with an overall contribution of 29.32% and 70.22% to the ΣBPs, indicating that there was a large amount of BPS and BPA consumption in the study area. During a one-week sampling period, ΣBPs changed slightly at the same sampling site. It was found that high removal efficiencies were achieved for BPs in anoxic and oxic secondary clarifier treatment units, suggesting that biodegradation and sorption played major roles in BPs elimination in the STP. After tertiary treatment, all BPs except BPA were completely removed, suggesting the necessity to investigate the fate and toxicity of BPA in the aquatic environment.

An in vitro investigation of endocrine disrupting potentials of ten bisphenol analogues

The endocrine disruption potency of BPA was reported elsewhere, but the mechanisms of its analogues have not been fully resolved. In this study, endocrine disruption potentials of nine alternative bisphenol analogues, namely 2,2-bis(4-hydroxyphenyl)butane (BPB), 2,2-Bis(4-hydroxy-3-methylphenyl)propane (BPC), 4,4'-dihydroxydiphenylmethane (BPF), 4,4'-(1,3-Phenylene diisopropylidene)bisphenol (BPM), 4,4'-(1,4-phenylenediisopropylidene)bisphenol (BPP), 4,4'- sulfonyldiphenol (BPS), 4,4' cyclohexylidenebisphenol (BPZ), 4,4' (hexafluoroisopropylidene)-diphenol (BPAF) and 4,4'-(1-phenylethylidene)bisphenol (BPAP), plus 2,2-bis(4-hydroxyphenyl)propane (BPA) were investigated by H295R cell and MVLN cell bioassays. In the H295R cell assay, the endpoints included hormone production and key genes for steroidogenesis (CYP11A, CYP17, CYP19 and 3βHSD2) or metabolism sulfotransferase (SULT1A1, SULT2A1 and SULT2B1) at the molecular level. The results indicated that except for BPP or BPAF, the eight other bisphenols significantly increased the E2/T ratio. In addition, BPB, BPF and BPS significantly up-regulate CYP19 gene expression, and only BPB significantly reduced sulfotransferase gene expression. In the MVLN luciferase gene reporter assay, seven bisphenols induced luciferase activity alone, and are 10⁴ to 10⁸-fold less potent than E2. Their nuclear ERα binding activity is in the order of BPAF > BPZ > BPP > BPB > BPA > BPF > BPS. In summary, all nine tested bisphenols showed endocrine toxicity through different mechanisms. Some had similar potency as BPA, but some had even higher potency. Further research is necessary to evaluate the toxicity of these potential BPA substitutes.

Bisphenols and the Development of Type 2 Diabetes: The Role of the Skeletal Muscle and Adipose Tissue

Bisphenol A (BPA) and bisphenol S (BPS) are environmental contaminants that have been associated with the development of insulin resistance and type 2 diabetes (T2D). Two organs that are often implicated in the development of insulin resistance are the skeletal muscle and the adipose tissue, however, seldom studies have investigated the effects of bisphenols on their metabolism. In this review we discuss metabolic perturbations that occur in both the skeletal muscle and adipose tissue affected with insulin resistance, and how exposure to BPA or BPS has been linked to these changes. Furthermore, we highlight the possible effects of BPA on the cross-talk between the skeletal muscle and adipose tissue.

Evaluation of the effects of low nanomolar bisphenol A-like compounds' levels on early human embryonic development and lipid metabolism with human embryonic stem cell in vitro differentiation models

The widely used chemical bisphenol A (BPA) has been associated with several health effects. In recent years, many derivatives were developed to replace BPA although without thorough toxicological evaluation. Here, we employed a human embryoid body (EB)-based in vitro global differentiation and hepatic specification models, followed by RNA-seq analyses, to comprehensively study the potential developmental toxicity of six BPA replacements (BPS, BPF, BPZ, BPB, BPE, and BPAF), as compared to BPA. We found that those bisphenols may disrupt lineage commitment and lipid metabolism during early embryonic development. These effects mostly manifested via the dysregulation of HOX and APO family genes. Moreover, among the seven bisphenols analyzed, BPE seemed to have the mildest effects.

Kinetics and biotransformation products of bisphenol F and S during aerobic degradation with activated sludge

Bisphenol F (BPF) and bisphenol S (BPS) are becoming widespread in the environment despite the lack of information regarding their fate during wastewater treatment and in the environment. This study assessed the biodegradation kinetics of BPF and BPS during biological wastewater treatment with activated sludge using GC-MS/MS, and the identification of biotransformation products (BTPs) using LC-QTOF-MS. The results showed that BPF and BPS degrade readily and unlikely accumulate in biosolids or wastewater effluent (c_i = 0.1 mg L^-1, half-lives <4.3 days). The first-order kinetic model revealed that BPF (k_t = 0.20-0.38) degraded faster than BPS (k_t = 0.04-0.16) and that degradation rate decreases with an increasing initial concentration of BPS (half-lives 17.3 days). The absence of any additional organic carbon source significantly slowed down degradation, in particular, that of BPS (lag phase on day 18 instead of day 7). The machine-learning algorithm adopted as part of the non-targeted workflow identified three known BTPs and one novel BTP of BPF, and one known and ten new BTPs of BPS. The data from this study support possible new biodegradation pathways, namely sulphation, methylation, cleavage and the coupling of smaller bisphenol moieties.