pH-triggered charge-reversible of glycol chitosan conjugated carboxyl graphene for enhancing photothermal ablation of focal infection

Photochemical Strategies toward Precision Targeting against Multidrug-Resistant Bacterial Infections

Infectious diseases pose a serious threat and a substantial economic burden on global human and public health security, especially with the frequent emergence of multidrug-resistant (MDR) bacteria in clinical settings. In response to this urgent need, various photobased anti-infectious therapies have been reported lately. This Review explores and discusses several photochemical targeted antibacterial therapeutic strategies for addressing bacterial infections regardless of their antibiotic susceptibility. In contrast to conventional photobased therapies, these approaches facilitate precise targeting of pathogenic bacteria and/or infectious microenvironments, effectively minimizing toxicity to mammalian cells and surrounding healthy tissues. The highlighted therapies include photodynamic therapy, photocatalytic therapy, photothermal therapy, endogenous pigments-based photobleaching therapy, and polyphenols-based photo-oxidation therapy. This comprehensive exploration aims to offer updated information to facilitate the development of effective, convenient, safe, and alternative strategies to counter the growing threat of MDR bacteria in the future.

Healing with precision: A multi-functional hydrogel-bioactive glass dressing boosts infected wound recovery and enhances neurogenesis in the wound bed

Chronic skin wounds, especially infected ones, pose a significant clinical challenge due to their increasing incidence and poor outcomes. The deteriorative microenvironment in such wounds, characterized by reduced extracellular matrix, impaired angiogenesis, insufficient neurogenesis, and persistent bacterial infection, has prompted the exploration of novel therapeutic strategies. In this study, we developed an injectable multifunctional hydrogel (GEL/BG@Cu + Mg) incorporating Gelatin-Tannic acid/ N-hydroxysuccinimide functionalized polyethylene glycol and Bioactive glass doped with copper and magnesium ions to accelerate the healing of infected wounds. The GEL/BG@Cu + Mg hydrogel composite demonstrates good biocompatibility, degradability, and rapid formation of a protective barrier to stop bleeding. Synergistic bactericidal effects are achieved through the photothermal properties of BG@Cu + Mg and sustained copper ions release, with the latter further promoting angiogenesis. Furthermore, the hydrogel enhances neurogenesis by stimulating axons and Schwann cells in the wound bed through the beneficial effects of magnesium ions. Our results demonstrate that the designed novel multifunctional hydrogel holds tremendous promise for treating infected wounds and allowing regenerative neurogenesis at the wound site, which provides a viable alternative for further improving clinical outcomes.

Recent progress on bismuth-based light-triggered antibacterial nanocomposites: Synthesis, characterization, optical properties and bactericidal applications

Bacterial infections pose a seriously threat to the safety of the environment and human health. In particular, the emergence of drug-resistant pathogens as a result of antibiotic abuse and high trauma risk has rendered conventional therapeutic techniques insufficient for treating infections by these so-called "superbugs". Therefore, there is an urgent need to develop highly efficient and environmentally-friendly antimicrobial agents. Bismuth-based nanomaterials with unique structures and physicochemical characteristics have attracted considerable attention as promising antimicrobial candidates, with many demonstratingoutstanding antibacterial effects upon being triggered by broad-spectrum light. These nanomaterials have also exhibited satisfactory energy band gaps and electronic density distribution with improved photonic properties for extensive and comprehensive applications after being modified through various engineering methods. This review summarizes the latest research progress made on bismuth-based nanomaterials with different morphologies, structures and compositions as well as the different methods used for their synthesis to meet their rapidly increasing demand, especially for antibacterial applications. Moreover, the future prospects and challenges regarding the application of these nanomaterials are discussed. The aim of this review is to stimulate interest in the development and experimental transformation of novel bismuth-based nanomaterials to expand the arsenal of effective antimicrobials.

Photothermal and Photocatalytic Glycol Chitosan and Polydopamine-Grafted Oxygen Vacancy Bismuth Oxyiodide (BiO1-x I) Nanoparticles for the Diagnosis and Targeted Therapy of Diabetic Wounds

Treatment of diabetic wounds is a significant clinical challenge due to the massive infections caused by bacteria. In this study, multifunctional glycol chitosan and polydopamine-coated BiO1-x I (GPBO) nanoparticles (NPs) with near-infrared (NIR) photothermal and photocatalytic abilities are prepared. When infection occurs, the local microenvironment becomes acidic, and the pH-switchable GPBO can target the bacteria of the wound site. The NIR-assisted GPBO treatment exhibits anti-bacterial effects with fast response, high efficiency, and long duration to Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. GPBO achieves excellent photothermal imaging and CT imaging of the mouse subcutaneous abscess model. With the assistance of NIR irradiation, the GPBO promotes the healing of the diabetic wound model with the effects of anti-bacteria, anti-inflammation, the M2 polarization promotion of macrophages, and angiogenesis. This is the first-time report of nano-sized BiO1-x I. The synthesis and selected application for the imaging and targeted therapy of diabetic wounds are presented. This study offers an example of the NP-assisted precise diagnosis and therapy of bacterial infection diseases.

Recent advances of hydrogels as smart dressings for diabetic wounds

Chronic diabetic wounds have been an urgent clinical problem, and wound dressings play an important role in their management. Due to the design of traditional dressings, it is difficult to achieve adaptive adhesion and on-demand removal of complex diabetic wounds, real-time monitoring of wound status, and dynamic adjustment of drug release behavior according to the wound microenvironment. Smart hydrogels, as smart dressings, can respond to environmental stimuli and achieve more precise local treatment. Here, we review the latest progress of smart hydrogels in wound bandaging, dynamic monitoring, and drug delivery for treatment of diabetic wounds. It is worth noting that we have summarized the most important properties of smart hydrogels for diabetic wound healing. In addition, we discuss the unresolved challenges and future prospects in this field. We hope that this review will contribute to furthering progress on smart hydrogels as improved dressing for diabetic wound healing and practical clinical application.

Roxithromycin and rhEGF Co-loaded Reactive Oxygen Species Responsive Nanoparticles for Accelerating Wound Healing

BACKGROUND

Bacterial infection can delay wound healing and is therefore a major threat to public health. Although various strategies have been developed to treat bacterial infections, antibiotics remain the best option to combat infections. The inclusion of growth factors in the treatment approach can also accelerate wound healing. The co-delivery of antibiotics and growth factors for the combined treatment of wounds needs further investigation.

OBJECTIVE

Here we aimed to develop antibiotic and growth factor co-loaded nanoparticles (NPs) to treat Staphylococcus aureus-infected wounds.

METHODS

By using our previously prepared reactive oxygen species-responsive material (Oxi-αCD), roxithromycin (ROX)-loaded NPs (ROX/Oxi-αCD NPs) and recombinant human epidermal growth factor (rhEGF)/ROX co-loaded NPs (rhEGF/ROX/Oxi-αCD NPs) were successfully fabricated. The in vivo efficacy of this prepared nanomedicine was evaluated in mice with S. aureus-infected wounds.

RESULTS

ROX/Oxi-αCD NPs and rhEGF/ROX/Oxi-αCD NPs had a spherical structure and their particle sizes were 164 ± 5 nm and 190 ± 8 nm, respectively. The in vitro antibacterial experiments showed that ROX/Oxi-αCD NPs had a lower minimum inhibitory concentration than ROX. The in vivo animal experiments demonstrated that rhEGF/ROX/Oxi-αCD NPs could significantly accelerate the healing of S. aureus-infected wounds as compared to the free ROX drug and ROX/Oxi-αCD NPs (P < 0.05).

CONCLUSION

ROX and rhEGF co-loaded NPs can effectively eliminate bacteria in wounds and accelerate wound healing. Our present work could provide a new strategy to combat bacteria-infected wounds.

A responsive hydrogel modulates innate immune cascade fibrosis to promote ocular surface reconstruction after chemical injury

Following an ocular chemical injury, the release of neutrophil extracellular traps (NETs) triggers an innate immune cascade fibrotic effect involving macrophages (Mø), which limits corneal repair. However, the interplay and mechanisms between NETs and macrophages, as well as the coordination between the innate immunity and corneal repair, remain challenging issues. Using a co-culture system, we report that chemical stimulation exacerbates the accumulation of reactive oxygen species (ROS) within the polymorphonuclear neutrophils, leading to NET formation and the activation of M2 macrophages, ultimately inducing pathological fibrosis of the ocular surface through the IL-10/STAT3/TGF-β1/Smad2 axis. Inspired by the locally formed acidic microenvironment mediated by innate acute inflammatory stimulation, we further integrate sericin with oxidized chitosan nanoparticles loaded with black phosphorus quantum dots (BPQDs) using Schiff base chemistry to construct a functional pH-responsive hydrogel. Following corneal injury, the hydrogel selectively releases BPQDs in response to the acidic environment, inhibiting the innate immune cascade fibrosis triggered by the PMN-ROS-NETs. Thus, corneal pathological fibrosis is alleviated and reshaping of the ocular surface takes place. These results represent a refinement of the mechanism of inherent immune effector cell interactions, and provide new research ideas for the construction of nano biomaterials that regulate pathological fibrosis.

Croconaine conjugated cationic polymeric nanoparticles for NIR enhanced bacterial killing

Light-triggered treatment approach has been regarded as an effective option for sterilization due to noninvasiveness, limited drug resistance, and minimized adverse effects. Herein, we designed and synthesized a functionalized cationic polymer, CR-PQAC, with croconaine bridging agent and quaternary ammonium groups for photothermal enhanced antimicrobial therapy under near-infrared irradiation. The quaternary ammonium group on the pendent chain endowing CR-PQAC the ability to effectively bind to bacteria. The CR-PQAC could self-assembles into micellar nanoparticles in aqueous solution, which exhibited strong absorption in the near-infrared (NIR) region, excellent photostability, and photothermal conversion efficiency of up to 43.8 %. Notably, the CR-PQAC nanoparticles presented remarkable antibacterial activity against both methicillin-resistant Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacteria with 808 nm laser irradiation. Moreover, the developed CR-PQAC has negligible dark cytotoxicity and good hemolytic compatibility against mammalian cells. Both in vitro and in vivo studies have demonstrated that the desirable antibacterial efficacy of CR-PQAC was obtained. Therefore, the proposed CR-PQAC may be a promising antimicrobial agent for NIR-enhanced killing bacterial.

2D Nanomaterials and Their Drug Conjugates for Phototherapy and Magnetic Hyperthermia Therapy of Cancer and Infections

Photothermal therapy (PTT) and magnetic hyperthermia therapy (MHT) using 2D nanomaterials (2DnMat) have recently emerged as promising alternative treatments for cancer and bacterial infections, both important global health challenges. The present review intends to provide not only a comprehensive overview, but also an integrative approach of the state-of-the-art knowledge on 2DnMat for PTT and MHT of cancer and infections. High surface area, high extinction coefficient in near-infra-red (NIR) region, responsiveness to external stimuli like magnetic fields, and the endless possibilities of surface functionalization, make 2DnMat ideal platforms for PTT and MHT. Most of these materials are biocompatible with mammalian cells, presenting some cytotoxicity against bacteria. However, each material must be comprehensively characterized physiochemically and biologically, since small variations can have significant biological impact. Highly efficient and selective in vitro and in vivo PTTs for the treatment of cancer and infections are reported, using a wide range of 2DnMat concentrations and incubation times. MHT is described to be more effective against bacterial infections than against cancer therapy. Despite the promising results attained, some challenges remain, such as improving 2DnMat conjugation with drugs, understanding their in vivo biodegradation, and refining the evaluation criteria to measure PTT or MHT effects.

Recent advances in nanomaterial-mediated bacterial molecular action and their applications in wound therapy

Because of the multi-pathway antibacterial mechanisms of nanomaterials, they have received widespread attention in wound therapy. However, owing to the complexities of bacterial responses toward nanomaterials, antibacterial molecular mechanisms remain unclear, making it difficult to rationally design highly efficient antibacterial nanomaterials. Fortunately, molecular dynamics simulations and omics techniques have been used as effective methods to further investigate the action targets of nanomaterials. Therefore, the review comprehensively analyzes the antibacterial mechanisms of nanomaterials from the morphology-dependent antibacterial activity and physicochemical/optical properties-dependent antibacterial activity, which provided guidance for constructing excellently efficient and broad-spectrum antibacterial nanomaterials for wound therapy. More importantly, the main molecular action targets of nanomaterials from the membranes, DNA, energy metabolism pathways, oxidative stress defense systems, ribosomes, and biofilms are elaborated in detail. Furthermore, nanomaterials used in wound therapy are reviewed and discussed. Finally, future directions of nanomaterials from mechanisms to nanomedicine are further proposed.

Research progress of nanoparticle targeting delivery systems in bacterial infections

Bacterial infection is a huge threat to the health of human beings and animals. The abuse of antibiotics have led to the occurrence of bacterial multidrug resistance, which have become a difficult problem in the treatment of clinical infections. Given the outstanding advantages of nanodrug delivery systems in cancer treatment, many scholars have begun to pay attention to their application in bacterial infections. However, due to the similarity of the microenvironment between bacterial infection lesions and cancer sites, the targeting and accuracy of traditional microenvironment-responsive nanocarriers are questionable. Therefore, finding new specific targets has become a new development direction of nanocarriers in bacterial prevention and treatment. This article reviews the infectious microenvironment induced by bacteria and a series of virulence factors of common pathogenic bacteria and their physiological functions, which may be used as potential targets to improve the targeting accuracy of nanocarriers in lesions.

Biocompatible Gallium Nanodots against Drug-Resistant Bacterial Pneumonia and Liver Abscess

Resistant bacterial infection remains a severe public health threat, and conventional antibiotic drugs work poorly in effectively treating infectious diseases. Here, we developed gallium-based nanodots (Ga NDs), consisting of specific disruption of bacterial iron ability, to treat multidrug-resistant (MDR) Gram-negative bacteria-infected diseases. The Ga NDs significantly suppress the proliferation of two typical MDR bacteria strains (P. aeruginosa and ESBL E. coli) compared with clinically used antibacterial drugs, including penicillin and levofloxacin. Ga NDs could also disrupt the biofilms of these two bacterial strains. In P. aeruginosa infected pneumonia and ESBL E. coli infected acute liver abscess models, the Ga NDs enable substantial inhibition of bacterial growth and reduce the organs' inflammation that resulted in significant improvement of survival. Further, the Ga NDs demonstrated excellent biocompatibility and biosafety characteristics. Together, we believe that our gallium containing nanotherapeutics are expected to be developed into promising alternative therapies to combat drug-resistant bacterial infection.

Multifunctional chondroitin sulfate based hydrogels for promoting infected diabetic wounds healing by chemo-photothermal antibacterial and cytokine modulation

Diabetic foot (DF) is difficult to heal due to the formation of drug-resistant bacterial biofilms and dysregulation of the wound microenvironment. To solve this problem, multifunctional hydrogels were prepared by in situ or spraying with 3-aminophenylboronic acid modified oxidized chondroitin sulfate (APBA-g-OCS), polyvinyl alcohol (PVA) and black phosphorus/bismuth oxide/ε-polylysine (BP/Bi₂O₃/ε-PL) as precursors for promoting infected diabetic wounds healing. The hydrogels display multiple stimulus responsiveness, strong adhesion and rapid self-healing ability owing to the dynamic borate ester bonds, hydrogen bonds and π-π conjugation cross-link points, remain synergistic chemo-photothermal antibacterial effect and anti-biofilm formation ability due to the doping of BP/ Bi₂O₃/ε-PL into the hydrogel by dynamic imine bonds crosslinking and possess anti-oxidation and inflammatory chemokine adsorption ability attributing to the presence of APBA-g-OCS. Most importantly, as a result of the above functions, the hydrogels can not only respond to the wound microenvironment to conduct combined PTT and chemotherapy for efficient anti-inflammation, but also improve the wound microenvironment by scavenging ROS and regulating the expression of cytokines, thus further accelerating collagen deposition, promoting granulation tissue formation and angiogenesis, finally promoting the healing of infected wounds in diabetic rats.

Biocompatible Glycol Chitosan Microgels as Effective Drug Carriers

Glycol chitosan (GC) is a chitosan (CH) derivative with improved water solubility with regards to CH which affords significant solubility advantages. In this study, microgels of GC as p(GC) were synthesized by a microemulsion technique at various crosslinking ratios e.g., 5%, 10%, 50%, 75%, and 150% based on the repeating unit of GC using divinyl sulfone (DVS) as a crosslinker. The prepared p(GC) microgels were tested for blood compatibility and it was found that p(GC) microgels at 1.0 mg/mL concentration possessed a 1.15 ± 0.1% hemolysis ratio and 89 ± 5% blood clotting index value confirming their hemocompatibility. In addition, p(GC) microgels were found biocompatible with 75.5 ± 5% cell viability against L929 fibroblasts even at a 2.0 mg/mL concentration. By loading and releasing tannic acid (TA) (a polyphenolic compound with high antioxidant activity) as an active agent, p(GC) microgels' possible drug delivery device application was examined. The TA loading amount of p(GC) microgels was determined as 323.89 mg/g, and TA releases from TA loaded microgels (TA@p(GC)) were found to be linear within 9 h and a total amount of TA released was determined as 42.56 ± 2 mg/g within 57 h. According to the Trolox equivalent antioxidant capacity (TEAC) test, 400 µL of the sample added to the ABTS+ solution inhibited 68.5 ± 1.7% of the radicals. On the other hand, the total phenol content (FC) test revealed that 2000 μg/mL of TA@p(GC) microgels resulted in 27.5 ± 9.5 mg/mL GA eq antioxidant properties.

Biomaterials releasing drug responsively to promote wound healing via regulation of pathological microenvironment

Wound healing is characterized by complex, orchestrated, spatiotemporal dynamic processes. Recent findings demonstrated suitable local microenvironments were necessities for wound healing. Wound microenvironments include various biological, biochemical and physical factors, which are produced and regulated by endogenous biomediators, exogenous drugs, and external environment. Successful drug delivery to wound is complicated, and need to overcome the destroyed blood supply, persistent inflammation and enzymes, spatiotemporal requirements of special supplements, and easy deactivation of drugs. Triggered by various factors from wound microenvironment itself or external elements, stimuli-responsive biomaterials have tremendous advantages of precise drug delivery and release. Here, we discuss recent advances of stimuli-responsive biomaterials to regulate local microenvironments during wound healing, emphasizing on the design and application of different biomaterials which respond to wound biological/biochemical microenvironments (ROS, pH, enzymes, glucose and glutathione), physical microenvironments (mechanical force, temperature, light, ultrasound, magnetic and electric field), and the combination modes. Moreover, several novel promising drug carriers (microbiota, metal-organic frameworks and microneedles) are also discussed.

Photo-Antibacterial Activity of Two-Dimensional (2D)-Based Hybrid Materials: Effective Treatment Strategy for Controlling Bacterial Infection

Bacterial contamination in water bodies is a severe scourge that affects human health and causes mortality and morbidity. Researchers continue to develop next-generation materials for controlling bacterial infections from water. Photo-antibacterial activity continues to gain the interest of researchers due to its adequate, rapid, and antibiotic-free process. Photo-antibacterial materials do not have any side effects and have a minimal chance of developing bacterial resistance due to their rapid efficacy. Photocatalytic two-dimensional nanomaterials (2D-NMs) have great potential for the control of bacterial infection due to their exceptional properties, such as high surface area, tunable band gap, specific structure, and tunable surface functional groups. Moreover, the optical and electric properties of 2D-NMs might be tuned by creating heterojunctions or by the doping of metals/carbon/polymers, subsequently enhancing their photo-antibacterial ability. This review article focuses on the synthesis of 2D-NM-based hybrid materials, the effect of dopants in 2D-NMs, and their photo-antibacterial application. We also discuss how we could improve photo-antibacterials by using different strategies and the role of artificial intelligence (AI) in the photocatalyst and in the degradation of pollutants. Finally, we discuss was of improving the photo-antibacterial activity of 2D-NMs, the toxicity mechanism, and their challenges.

Different Dimensional Copper-Based Metal-Organic Frameworks with Enzyme-Mimetic Activity for Antibacterial Therapy

Fighting against bacterial infection and accelerating wound healing remain important and challenging in infected wound care. Metal-organic frameworks (MOFs) have received much attention for their optimized and enhanced catalytic performance in different dimensions of these challenges. The size and morphology of nanomaterials are important in their physiochemical properties and thereby their biological functions. Enzyme-mimicking catalysts, based on MOFs of different dimensions, display varying degrees of peroxidase (POD)-like activity toward hydrogen peroxide (H₂O₂) decomposition into toxic hydroxyl radicals (•OH) for bacterial inhibition and accelerating wound healing. In this study, we investigated the two most studied representatives of copper-based MOFs (Cu-MOFs), three-dimensional (3D) HKUST-1 and two-dimensional (2D) Cu-TCPP, for antibacterial therapy. HKUST-1, with a uniform and octahedral 3D structure, showed higher POD-like activity, resulting in H₂O₂ decomposition for •OH generation rather than Cu-TCPP. Because of the efficient generation of toxic •OH, both Gram-negative Escherichia coli and Gram-positive methicillin-resistant Staphylococcus aureus could be eliminated under a lower concentration of H₂O₂. Animal experiments indicated that the as-prepared HKUST-1 effectively accelerated wound healing with good biocompatibility. These results reveal the multivariate dimensions of Cu-MOFs with high POD-like activity, providing good potential for further stimulation of specific bacterial binding therapies in the future.

Nanomaterials and nanomaterials-based drug delivery to promote cutaneous wound healing

Various factors could damage the structure and integrity of skin to cause wounds. Nonhealing or chronic wounds seriously affect the well-being of patients and bring heavy burdens to the society. The past few decades have witnessed application of numerous nanomaterials to promote wound healing. Owing to the unique physicochemical characteristics at nanoscale, nanomaterials-based therapy has been regarded as a potential approach to promote wound healing. In this review, we first overview the wound categories, wound healing process and critical influencing factors. Then applications of nanomaterials with intrinsic therapeutic effect and nanomaterials-based drug delivery systems to promote wound healing are addressed in detail. Finally, current limitations and future perspectives of nanomaterials in wound healing are discussed.

Mild-temperature photothermal assisted CuSi nanowires for promoting infected wound healing

In clinical practice, the utilization of antibiotics is still the main approach for the treatment of wound contamination, which lacks the ability to accelerate wound healing and arises the global concern of antimicrobial resistance. Plenty of alternative methods have been explored in recent years due to the fast development of material science. Here, CuO/SiO₂ nanowires (CuSi NWs) with good near-infrared (NIR) photothermal conversion ability are synthesized by a one-step hydrothermal method. The as-prepared CuSi NWs possess excellent antibacterial ability against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which could be enhanced by the assistance of mild photothermal therapy (PTT). Moreover, CuSi NWs at suitable concentrations can promote proliferation, migration, and angiogenic gene expression of human umbilical vein endothelial cells (HUVECs), exhibiting a remarkable pro-vascularization ability. The in vivo mouse infect model further proves that the CuSi NWs might be a good candidate for the treatment of infected wounds as the high antibacterial efficiency and accelerated wound healing is obtained.

Photothermal Hydrogel Encapsulating Intelligently Bacteria-Capturing Bio-MOF for Infectious Wound Healing

Chronic wounds are characterized by long-term inflammation and persistent infection, which make them difficult to heal. Therefore, an urgent desire is to develop a multifunctional wound dressing that can prevent wound infection and promote wound healing by creating a favorable microenvironment. In this study, a curcumin-based metal-organic framework (QCSMOF-Van), loaded with vancomycin and coated with quaternary ammonium salt chitosan (QCS), was prepared. Multifunctional composite hydrogels were conveniently synthesized by combining methacrylic anhydride modified gelatin and methacrylic anhydride modified oxidized sodium alginate with QCSMOF-Van through radical polymerization and Schiff base reaction. It is important to note that the QCSMOF-Van could capture bacteria through the positive charges on the surface of QCS. In this process, due to the synergistic effect of broad-spectrum antibacterial Zn²⁺ and vancomycin, the metabolism of bacteria was well inhibited, and the efficient capturing and rapid killing of bacteria were achieved. The QCSMOF-Van hydrogels could precisely regulate the balance of M1/M2 phenotypes of macrophages, thereby promoting the regeneration of nerves and blood vessels, which promotes the rapid healing of chronic wounds. This advanced cascade management strategy for tissue regeneration highlights the potential of multifunctional composite hydrogels in chronic wound dressings.

Photothermally responsive chitosan-coated iron oxide nanoparticles for enhanced eradication of bacterial biofilms

This work developed a pH/NIR responsive antibacterial agent (CS-FeNPs) composed of chitosan (CS) and Fe₃O₄ nanoparticles (FeNPs). CS triggers bacterial attraction through surface charge, while Fe acts as a photothermal agent (PTA). The CS-Fe NPs exhibited antibacterial and antibiofilm activity against both bacteria (G+/G-). However, higher activity was observed against bacteria (G-) due to electrostatic interactions. The CS-FeNPs bind with the bacterial membrane through electrostatic interactions and disturb bacterial cells. Later, in an acidic environment, CS-FeNPs bind with bacterial membrane, and NIR irradiation leads the antibacterial activity. CS-FeNPs exhibited a potential photothermal conversion efficiency (η) of 21.53 %. Thus, it converts NIR irradiation into heat to kill the bacterial pathogen. The CS-FeNPs were found to be less cytotoxic with great antibacterial efficiency on planktonic bacteria and their biofilm, which indicates that they deserve to develop potential and safe treatment strategies for the treatment of bacterial infections.

Multimodal Imaging and Phototherapy of Cancer and Bacterial Infection by Graphene and Related Nanocomposites

The advancements in nanotechnology and nanomedicine are projected to solve many glitches in medicine, especially in the fields of cancer and infectious diseases, which are ranked in the top five most dangerous deadly diseases worldwide by the WHO. There is great concern to eradicate these problems with accurate diagnosis and therapies. Among many developed therapeutic models, near infra-red mediated phototherapy is a non-invasive technique used to invade many persistent tumors and bacterial infections with less inflammation compared with traditional therapeutic models such as radiation therapy, chemotherapy, and surgeries. Herein, we firstly summarize the up-to-date research on graphene phototheranostics for a better understanding of this field of research. We discuss the preparation and functionalization of graphene nanomaterials with various biocompatible components, such as metals, metal oxides, polymers, photosensitizers, and drugs, through covalent and noncovalent approaches. The multifunctional nanographene is used to diagnose the disease with confocal laser scanning microscopy, magnetic resonance imaging computed tomography, positron emission tomography, photoacoustic imaging, Raman, and ToF-SMIS to visualize inside the biological system for imaging-guided therapy are discussed. Further, treatment of disease by photothermal and photodynamic therapies against different cancers and bacterial infections are carefully conferred herein along with challenges and future perspectives.

Oxygen-supplied mesoporous carbon nanoparticles for enhanced photothermal/photodynamic synergetic therapy against antibiotic-resistant bacterial infections

Pandemic and epidemic spread of antibiotic-resistant bacterial infections would result in a huge number of fatalities globally. To combat antibiotic-resistant pathogens, new antimicrobial strategies should be explored and developed to confront bacteria without acquiring or increasing drug-resistance. Here, oxygen saturated perfluorohexane (PFH)-loaded mesoporous carbon nanoparticles (CIL@ICG/PFH@O2) with photothermal therapy (PTT) and enhanced photodynamic therapy (PDT) utility are developed for antibacterial applications. Ionic liquid groups are grafted onto the surface of mesoporous carbon nanoparticles, followed by anion-exchange with the anionic photosensitizer indocyanine green (ICG) and loading oxygen saturated PFH to prepare CIL@ICG/PFH@O2. These CIL@ICG/PFH@O2 nanoparticles exhibit effective PTT and enhanced PDT properties simultaneously upon 808 nm light irradiation. In vitro assays demonstrate that CIL@ICG/PFH@O2 shows a synergistic antibacterial action against antibiotic-resistant pathogens (methicillin-resistant Staphylococcus aureus and kanamycin-resistant Escherichia coli). Moreover, CIL@ICG/PFH@O2 could effectively kill drug-resistant bacteria in vivo to relieve inflammation and eliminate methicillin-resistant Staphylococcus aureus-wound infection under NIR irradiation, and the released oxygen can increase collagen deposition, epithelial tissue formation and blood vessel formation to promote wound healing while enhancing the PDT effect. This study proposes a platform with enhanced PTT/PDT effects for effective, controlled, and precise treatment of topical drug-resistant bacterial infections.

Recent advances in carbon-based nanomaterials for combating bacterial biofilm-associated infections

The prevalence of bacterial pathogens among humans has increased rapidly and poses a great threat to health. Two-thirds of bacterial infections are associated with biofilms. Recently, nanomaterials have emerged as anti-biofilm agents due to their enormous potential for combating biofilm-associated infections and infectious disease management. Among these, relatively high biocompatibility and unique physicochemical properties of carbon-based nanomaterials (CBNs) have attracted wide attention. This review presented the current advances in anti-biofilm CBNs. Different kinds of CBNs and their physicochemical characteristics were introduced first. Then, the various potential mechanisms underlying the action of anti-biofilm CBNs during different stages were discussed, including anti-biofouling activity, inhibition of quorum sensing, photothermal/photocatalytic inactivation, oxidative stress, and electrostatic and hydrophobic interactions. In particular, the review focused on the pivotal role played by CBNs as anti-biofilm agents and delivery vehicles. Finally, it described the challenges and outlook for the development of more efficient and bio-safer anti-biofilm CBNs.

Recent development in antibacterial activity and application of nanozymes in food preservation

Nanozymes with excellent broad-spectrum antibacterial properties offers an alternative strategy for food preservation. This review comprehensively summarized the antibacterial mechanisms of nanozymes, including the generation of reactive oxygen species (ROS) and the destruction of biofilms. Besides, the primary factors (size, morphology, hybridization, light, etc.) regulating the antibacterial activity of different types of nanozymes were highlighted in detail, which provided effective guidance on how to design highly efficient antibacterial nanozymes. Moreover, this review presented elaborated viewpoints on the unique applications of nanozymes in food preservation, including the selection of nanozymes loading matrix, fabrication techniques of nanozymes-based antibacterial films/coatings, and the recent advances in the application of nanozymes-based antibacterial films/coatings in food preservation. In the end, the safety issues of nanozymes have also been mentioned. Overall, this review provided new avenues in the field of food preservation and displayed great prospects.

An outstanding role of novel virus-like heterojunction nanosphere BOCO@Ag as high performance antibacterial activity agent

The development of highly efficient photonic nanomaterials with synergistic biological effects is critical and challenging task for public hygiene health well-being and has attracted extensive interest. In this study, a type of near-infrared (NIR) driven, virus-like heterojunction was first developed for synergistic biological application. The Ag-coated Bi₂CO₅ nanomaterial (BOCO@Ag) demonstrated good biocompatibility, low cytotoxicity, high antibacterial activity and excellent light utilization stability. The synthesized BOCO@Ag performed a potential high photothermal conversion (efficiency~46.81%) to generate high temperatures when irradiated with near-infrared light illumination. As expected, compared to single Ag+ disinfection, BOCO@Ag can exhibit better antibacterial performance when combined with photothermal energy and released Ag+ . These results suggest that BOCO@Ag can be a promising photo-activate antimicrobial candidate and provide security for humans health and the environment treatment.

Dynamic nano-assemblies based on two-dimensional inorganic nanoparticles: Construction and preclinical demonstration

Dynamic drug delivery systems (DDSs) have the ability of transforming their morphology and functionality in response to the biological microenvironments at the disease site and/or external stimuli, show spatio-temporally controllable drug delivery, and enhance the treatment efficacy. Due to the large surface area and modification flexibility, two-dimensional (2D) inorganic nanomaterials are being increasingly exploited for developing intelligent DDSs for biomedical applications. In this review, we summarize the engineering methodologies used to construct transformable 2D DDSs, including changing compositions, creating defects, and surface dot-coating with polymers, biomolecules, or nanodots. Then we present and discuss dynamic inorganic 2D DDSs whose transformation is driven by the diseased characteristics, such as pH gradient, redox, hypoxia, and enzyme in the tumor microenvironment as well as the external stimuli including light, magnetism, and ultrasound. Finally, the limitations and challenges of current transformable inorganic DDSs for clinical translation and their in vivo safety assessment are discussed.

Integrated endotoxin-adsorption and antibacterial properties of platelet-membrane-coated copper silicate hollow microspheres for wound healing

Serious infection caused by drug-resistant gram-negative bacteria and their secreted toxins (e.g., lipopolysaccharide) is a serious threat to human health. Thus, treatment strategies that efficiently kill bacteria and reducing the impact of their toxins simultaneously are urgently required. Herein, a novel antibacterial platform composed of a mesoporous copper silicate microsphere (CSO) core and a platelet membrane (PM) shell was prepared (CSO@PM). CSO@PM specifically targets bacteria owing to formyl peptide receptors on the PM and, combined with photothermal therapy (PTT), exhibits highly effective bacter icidal activity. Importantly, CSO@PM can adsorb lipopolysaccharide secreted by gram-negative bacteria, resulting in inflammation reduction. Thus, CSO@PM stimulates re-epithelialization and granulation-tissue formation, promoting wound healing. Moreover, this antibacterial platform exhibits no obvious toxicity at all the test concentrations in vitro and in vivo. Thus, CSO@PM exhibits a robust antibacterial effect and a strong toxin-adsorption capacity, facilitating the clinical treatment of many bacterial infections and the development of next-generation antibacterial nanoagents.

Infection microenvironment-related antibacterial nanotherapeutic strategies

The emergence and spread of antibiotic resistance is one of the biggest challenges in public health. There is an urgent need to discover novel agents against the occurrence of multidrug-resistant bacteria, such as methicillin-resistant Staphylococcus aureus and vancomycin-resistant enterococci. The drug-resistant pathogens are able to grow and persist in infected sites, including biofilms, phagosomes, or phagolysosomes, which are more difficult to eradicate than planktonic ones and also foster the development of drug resistance. For years, various nano-antibacterial agents have been developed in the forms of antibiotic nanocarriers. Inorganic nanoparticles with intrinsic antibacterial activity and inert nanoparticles assisted by external stimuli, including heat, photon, magnetism, or sound, have also been discovered. Many of these strategies are designed to target the unique microenvironment of bacterial infections, which have shown potent antibacterial effects in vitro and in vivo. This review summarizes ongoing efforts on antibacterial nanotherapeutic strategies related to bacterial infection microenvironments, including targeted antibacterial therapy and responsive antibiotic delivery systems. Several grand challenges and future directions for the development and translation of effective nano-antibacterial agents are also discussed. The development of innovative nano-antibacterial agents could provide powerful weapons against drug-resistant bacteria in systemic or local bacterial infections in the foreseeable future.

Surface-modified polylactic acid nanospheres with chitosan for antibacterial activity of 1, 2-benzisothiazolin-3-one

The primary purpose of this study was to develop an innovative chitosan (CS) modified polylactic acid (PLA) nanospheres for enhancing the bioavailability of 1, 2-benzisothiazolin-3-one (BIT). The cellular uptake efficiency was corresponded positively to the quantity of CS coated on BIT-PLA nanospheres against E. coli and S. aureus. The membrane potentials of E.coli and S. aureus treated with BIT-PLA, BIT-PLA-0.1%CS and BIT-PLA-0.5%CS were reduced with the extension of incubation time and the ratio of coated CS. The enhancement of CS modified on BIT-PLA nanospheres was reduced antioxidase activities and generated excessive reactive oxygen species. The lowest EC₅₀ value of the modified BIT-PLA-0.5%CS suggested that its toxicity index was around 2.95-fold and 2.11-fold that of non-modified BIT-PLA against E. coli and S. aureus, respectively. These results revealed that the CS modified BIT-PLA nanospheres had a bright prospect in antibacterial formulation delivery system and improving the bioavailability.

A multimodal antimicrobial platform based on MXene for treatment of wound infection

Featured with a three-dimensional network structure, electrostatic spinning nanofibrous membranes can maintain the hygroscopic balance in the wound place and promote the wound healing, thus have been extensively studied as a promising wound healing dressing. In this study, amoxicillin (AMX), MXene, and polyvinyl alcohol (PVA) were mixed and electrospun into an antibacterial nanofibrous membrane (MXene-AMX-PVA nanofibrous membrane). In the composite nanofibrous membrane, the PVA matrix could control the release of AMX to combat bacterial infection, while the MXene could transform the near-infrared laser into heat, leading to local hyperthermia to promote the AMX release. Meanwhile, the local hyperthermia could also destroy the noncellular components of bacteria and synergistically cause the bacterial inactivation. The bacteriostatic activity and wound healing ability of the composite nanofibrous membrane were systematically verified on the S. aureus in vitro and the S. aureus-infected mouse skin defect model in vivo. This membrane not only functioned as a physical barrier to co-load the AMX and MXene, but also exhibited the high antibacterial and accelerated wound healing capacity, which will advance the design of novel wound healing dressings and antibacterial strategies.

A novel Vancomycin-Functionalized-Magnetic Graphene Composite for Use as a Near-Infrared-Induced Synergistic Chemo-Photothermal Antibacterial

Antibiotic-resistant bacterial strains are a major cause of disease. They continue to remain a challenge in the clinic particularly in the vision system. For example, infectious endophthalmitis is a major blind-causing disease caused by bacteria. A highly efficient synergistic antibacterial treatment that uses a photothermal antibacterial therapeutic with a chemo-antibacterial therapeutic in a multifunctional nanocomposite is reported. It is prepared by immobilizing vancomycin onto the surface of a magnetic chitosan-graphene (VCM-MCG) composite. An antibacterial effect is achieved when VCM-MCG is applied. This effect is enhanced when the nanocomposites are irradiated with a near-infrared laser. Growth of gram-positive methicillin-resistant Staphylococcus aureus and gram-negative Escherichia coli bacteria are suppressed efficiently. Such a composite can help manage the control of pathogenic bacteria growth in the clinic.

Reversible antibiotic loading and pH-responsive release from polymer brushes on contact lenses for therapy and prevention of corneal infections

Corneal infection is an important cause of corneal damage and vision loss. In this work, polyhydroxy antibiotics were grafted onto polymer brush-modified contact lenses through dynamic chemical bonds between polyphenolic hydroxyls and phenylboronic acid. Both in vitro and in vivo antibacterial tests demonstrated great promise in the prevention of bacterial keratitis, which could be attributed to the enhanced retention time and drug bioavailability.

Synthesis and characterization of photothermal antibacterial hydrogel with enhanced mechanical properties

Based on Fe3O4 nanoparticles, a hydrogel with controllable crosslinking density, good mechanical properties, photothermal and antibacterial abilities was constructed.

Emerging photothermal-derived multimodal synergistic therapy in combating bacterial infections

Due to the emerging bacterial resistance and the protection of tenacious biofilms, it is hard for the single antibacterial modality to achieve satisfactory therapeutic effects nowadays. In recent years, photothermal therapy (PTT)-derived multimodal synergistic treatments have received wide attention and exhibited cooperatively enhanced bactericidal activity. PTT features spatiotemporally controllable generation of hyperthermia that could eradicate bacteria without inducing resistance. The synergy of it with other treatments, such as chemotherapy, photo-dynamic/catalytic therapy (PDT/PCT), immunotherapy, and sonodynamic therapy (SDT), could lower the introduced laser density in PTT and avoid undesired overheating injury of normal tissues. Simultaneously, by heat-induced improvement of the bacterial membrane permeability, PTT is conducive for accelerated intracellular permeation of chemotherapeutic drugs as well as reactive oxygen species (ROS) generated by photosensitizers/sonosensitizers, and could promote infiltration of immune cells. Thereby, it could solve the currently existing sterilization deficiencies of other combined therapeutic modes, for example, bacterial resistance for chemotherapy, low drug permeability for PDT/PCT/SDT, adverse immunoreactions for immunotherapy, etc. Admittedly, PTT-derived synergistic treatments are becoming essential in fighting bacterial infection, especially those caused by antibiotic-resistant strains. This review firstly presents the classical and newly reported photothermal agents (PTAs) in brief. Profoundly, through the introduction of delicately designed nanocomposite platforms, we systematically discuss the versatile photothermal-derived multimodal synergistic therapy with the purpose of sterilization application. At the end, challenges to PTT-derived combinational therapy are presented and promising synergistic bactericidal prospects are anticipated.

Pseudomonas aeruginosa Biofilms

Pseudomonas aeruginosa is an opportunistic human pathogen causing devastating acute and chronic infections in individuals with compromised immune systems. Its highly notorious persistence in clinical settings is attributed to its ability to form antibiotic-resistant biofilms. Biofilm is an architecture built mostly by autogenic extracellular polymeric substances which function as a scaffold to encase the bacteria together on surfaces, and to protect them from environmental stresses, impedes phagocytosis and thereby conferring the capacity for colonization and long-term persistence. Here we review the current knowledge on P. aeruginosa biofilms, its development stages, and molecular mechanisms of invasion and persistence conferred by biofilms. Explosive cell lysis within bacterial biofilm to produce essential communal materials, and interspecies biofilms of P. aeruginosa and commensal Streptococcus which impedes P. aeruginosa virulence and possibly improves disease conditions will also be discussed. Recent research on diagnostics of P. aeruginosa infections will be investigated. Finally, therapeutic strategies for the treatment of P. aeruginosa biofilms along with their advantages and limitations will be compiled.

Phototherapy-based combination strategies for bacterial infection treatment

The development of nanomedicine is expected to provide an innovative direction for addressing challenges associated with multidrug-resistant (MDR) bacteria. In the past decades, although nanotechnology-based phototherapy has been developed for antimicrobial treatment since it rarely causes bacterial resistance, the clinical application of single-mode phototherapy has been limited due to poor tissue penetration of light sources. Therefore, combinatorial strategies are being developed. In this review, we first summarized the current phototherapy agents, which were classified into two functional categories: organic phototherapy agents (e.g., small molecule photosensitizers, small molecule photosensitizer-loaded nanoparticles and polymer-based photosensitizers) and inorganic phototherapy agents (e.g., carbo-based nanomaterials, metal-based nanomaterials, composite nanomaterials and quantum dots). Then the development of emerging phototherapy-based combinatorial strategies, including combination with chemotherapy, combination with chemodynamic therapy, combination with gas therapy, and multiple combination therapy, are presented and future directions are further discussed. The purpose of this review is to highlight the potential of phototherapy to deal with bacterial infections and to propose that the combination therapy strategy is an effective way to solve the challenges of single-mode phototherapy.

Graphene Oxide/Copper Nanoderivatives-Modified Chitosan/Hyaluronic Acid Dressings for Facilitating Wound Healing in Infected Full-Thickness Skin Defects

PURPOSE

Wound healing, especially of infected wounds, remains a clinical challenge in plastic surgery. This study aimed to manufacture a novel and multifunctional wound dressing by combining graphene oxide/copper nanocomposites (GO/Cu) with chitosan/hyaluronic acid, providing significant opportunities for the therapy of wound repair in wounds with a high risk of bacterial infection.

METHODS

In this study, GO/Cu-decorated chitosan/hyaluronic acid dressings (C/H/GO/Cu) were prepared using sodium trimetaphosphate (STMP) crosslinking and the vacuum freeze-drying method, and chitosan/hyaluronic acid dressings (C/H) and GO-incorporated chitosan/hyaluronic acid dressings (C/H/GO) served as controls. The surface characterization, in vitro degradation under various pH values, antimicrobial potential, cytocompatibility and in vivo therapeutic efficacy in a bacteria-infected full-thickness skin defect model were systematically evaluated.

RESULTS

Our experimental results indicated that the acidic environment facilitated the release of copper (CuNPs and Cu2+) from the dressings, and prepared C/H/GO/Cu dressings exhibited significant in vitro antimicrobial activities against the two tested bacterial strains (ATCC35984 and ATCC25923). All three dressings showed satisfactory cytocompatibility with mouse fibroblasts (NIH/3T3-L1). Moreover, remarkably accelerated wound healing was found in the C/H/GO/Cu group, with controlled inflammatory infiltration and improved angiogenesis in granulation tissues. In addition, no pathological damage was noted in the tissue structures of the tested organs (heart, lung, liver and kidney) in any of the four groups.

CONCLUSION

Collectively, GO/Cu-incorporated chitosan/hyaluronic acid dressings suggested a synergistic antimicrobial efficacy and acceptable biocompatibility both in vitro and in vivo, as well as a significantly accelerated healing process of bacteria-infected wounds. Thus, the multifunctional C/H/GO/Cu composite is expected to be a potential alternative for wound dressings, especially for the management of intractable wounds caused by bacterial infection.

Low-intensity near-infrared light-triggered spatiotemporal antibiotics release and hyperthermia by natural polysaccharide-based hybrid hydrogel for synergistic wound disinfection

Photothermal sterilization is a promising and effective treatment method in treating bacterial infection. Generally, a widely employed light source in photothermal sterilization inevitably damages the skin tissue due to the high-intensity irradiation dose. How to provide useful antibacterial outcomes without light-triggered skin damage is a challenge for photothermal sterilization. In this work, a novel antibacterial hydrogel (VAT hydrogel, the abbreviation for vancomycin-agarose-ferric tannate hydrogel) has been successfully constructed by the natural polysaccharide hydrogel (AG) encapsulating ferric tannate (TA-Fe) nanoparticles and vancomycin. The VAT hydrogel exhibited the outstanding photothermal properties and controllable antibiotics release. With the results of antibacterial assays, the VAT hydrogel revealed the superior effectiveness of synergistic wound disinfection by the low-intensity near-infrared light-triggered spatiotemporal antibiotics release and hyperthermia. More importantly, the VAT hydrogels possessed the good biocompatibility. With the outstanding synergistic sterilizing effect and excellent biocompatibility, the VAT hydrogel would be a promising candidate for bacteria-associated wound infections.

Biomimetic biodegradable Ag@Au nanoparticle-embedded ureteral stent with a constantly renewable contact-killing antimicrobial surface and antibiofilm and extraction-free properties

Urinary tract infections (UTIs) caused by the contamination of the ureteral stent and the pain associated with secondary stent extractions are worldwide problems in the treatment of urinary tract disorders. Here, we reported a biodegradable, long-term antibacterial, and extraction-free ureteral stent with a constantly renewable contact-killing surface and an antibiofilm function achieved by constructing a hyperbranched poly(amide-amine)-capped Ag shell and Au core nanoparticle (Ag@Au NP)-embedded fiber membrane-structured poly(glycolic acid)/poly(lactic-co-glycolic acid) (PGA/PGLA) ureteral stent. The ureteral stent showed fast contact-killing properties, i.e., 5 min for Escherichia coli and 10 min for Staphylococcus aureus, with an inhibition rate higher than 99%. In addition, gradient degradation of PGA/PGLA endowed the stent with a self-cleaning property and long-term antibacterial function by continuous exfoliation of the stent surface, thereby exposing the inner Ag@Au NPs and eliminating adherent bacteria and proteins. Subsequently, in the 16-day in vitro degradation test, the stent showed durable bactericidal activity, less total release of Ag and Au elements (6.7%, ~8 μg), and low cytotoxicity (with a relative growth rate of >80% of L929 cells). In vivo experiments on a farm pig model showed that the stent exhibited a remarkable antibiofilm property and reduced the level of inflammatory and necrotic cells. After seven days of implantation, the stent showed a gradient degradation behavior and maintained structural integrity without the presence of any large fragments in the urinary system according to the B-ultrasonic examination. The as-developed biodegradable and renewable contact-killing antibacterial strategy was efficient in preparing the ureteral stent with antibiofilm and extraction-free properties to treat stent-induced UTI. Statement of significance This study presents a customized antibiofilm solution for biodegradable implants. Two particularly important aspects of this work are as follows.

Bacteria-induced aggregation of bioorthogonal gold nanoparticles for SERS imaging and enhanced photothermal ablation of Gram-positive bacteria

The challenge in antimicrobial photothermal therapy (PTT) is to develop strategies for decreasing the damage to cells and increasing the antibacterial efficiency. Herein, we report a novel theranostic strategy based on bacteria-induced gold nanoparticle (GNP) aggregation, in which GNPs in situ aggregated on the bacterial surface via specific targeting of vancomycin and bioorthogonal cycloaddition. Plasmonic coupling between adjacent GNPs exhibited a strong "hot spot" effect, enabling effective surface enhanced Raman scattering (SERS) imaging of bacterial pathogens. More importantly, in situ aggregation of GNPs showed strong NIR adsorption and high photothermal conversion, allowing enhanced photokilling activity against Gram-positive bacteria. In the absence of bacterial strains, GNPs were dispersed and showed a very low photothermal effect, minimizing the side effects towards surrounding healthy tissues. Given the above advantages, the bioorthogonal theranostic strategy developed in this study may find potential applications in treating bacterial infection and even multidrug-resistant bacteria.

A review on advances in graphene-derivative/polysaccharide bionanocomposites: Therapeutics, pharmacogenomics and toxicity

Graphene-based bionanocomposites are employed in several ailments, such as cancers and infectious diseases, due to their large surface area (to carry drugs), photothermal properties, and ease of their functionalization (owing to their active groups). Modification of graphene-derivatives with polysaccharides is a promising strategy to decrease their toxicity and improve target ability, which consequently enhances their biotherapeutic efficacy. Herein, functionalization of graphene-based materials with carbohydrate polymers (e.g., chitosan, starch, alginate, hyaluronic acid, and cellulose) are presented. Subsequently, recent advances in graphene nanomaterial/polysaccharide-based bionanocomposites in infection treatment and cancer therapy are comprehensively discussed. Pharmacogenomic and toxicity assessments for these bionanocomposites are also highlighted to provide insight for future optimized and smart investigations and researches.

Enhancing ZnO-NP Antibacterial and Osteogenesis Properties in Orthopedic Applications: A Review

Prosthesis-associated infections and aseptic loosening are major causes of implant failure. There is an urgent need to improve the antibacterial ability and osseointegration of orthopedic implants. Zinc oxide nanoparticles (ZnO-NPs) are a common type of zinc-containing metal oxide nanoparticles that have been widely studied in many fields, such as food packaging, pollution treatment, and biomedicine. The ZnO-NPs have low toxicity and good biological functions, as well as antibacterial, anticancer, and osteogenic capabilities. Furthermore, ZnO-NPs can be easily obtained through various methods. Among them, green preparation methods can improve the bioactivity of ZnO-NPs and strengthen their potential application in the biological field. This review discusses the antibacterial abilities of ZnO-NPs, including mechanisms and influencing factors. The toxicity and shortcomings of anticancer applications are summarized. Furthermore, osteogenic mechanisms and synergy with other materials are introduced. Green preparation methods are also briefly reviewed.

Nanomaterials for the Photothermal Killing of Bacteria

An upsurge in the multidrug-resistant (MDR) bacterial pestilence is a global cause for concern in terms of human health. Lately, nanomaterials with photothermal effects have assisted in the efficient killing of MDR bacteria, attributable to their uncommon plasmonic, photocatalytic, and structural properties. Examinations of substantial amounts of photothermally enabled nanomaterials have shown bactericidal effects in an optimized time under near-infrared (NIR) light irradiation. In this review, we have compiled recent advances in photothermally enabled nanomaterials for antibacterial activities and their mechanisms. Photothermally enabled nanomaterials are classified into three groups, including metal-, carbon-, and polymer-based nanomaterials. Based on substantial accomplishments with photothermally enabled nanomaterials, we have inferred current trends and their prospective clinical applications.