Review of air disinfection approaches and proposal for thermal inactivation of airborne viruses as a life-style and an instrument to fight pandemics

Gamma-irradiated fowl cholera vaccines formulated with different adjuvants induced antibody response and cytokine expression in chickens

Fowl cholera is one of the most serious and economically important infectious diseases of poultry caused by Pasteurella multocida. Formalin-inactivated vaccine, administered intramuscularly, is widely used in Ethiopia with a low success rate. Gamma irradiation is an effective approach to inactivate pathogens for vaccine development. In a previous study, we reported the feasibility of developing gamma-irradiated vaccines that induced both systemic and mucosal antibody responses with complete protection against homologous lethal challenge. In the present study, we aimed to broaden our understanding of the immunogenicity of the gamma-irradiated vaccines by including peripheral blood mononuclear cells (PBMC) response analysis. A total of 156 eight-week-old fowl cholera-specific antibody negative Bovans Brown chickens were utilized in this experiment. The performances of gamma-irradiated P. multocida vaccines formulated with different adjuvants, Montanide Gel 01 PR (G-1), Carbigen® (G-2), Emulsigen-D®+aluminum hydroxide gel (G-3), and Emulsigen-p® (G-4) were evaluated in comparison with the formalin-inactivated vaccine (G-5) and unvaccinated control (G-6). Chickens received two doses of the vaccines at days 0 and 21. Sera, tracheal, and crop lavage were collected at days 0, 21, 35, and 56 to assess IgG and IgA levels using indirect and sandwich ELISA, respectively. PBMC proliferation was compared between vaccinated and unvaccinated controls. In addition, vaccination-induced expression of cytokine genes was analyzed in PBMC using qPCR. Chickens were challenged with 2.5x107 CFU/ml of P. multocida biotype A intramuscularly one day after day-56 sampling. Significant serum IgG titers were detected three weeks after primary vaccination in G1, G3, and G5. IgG titer substantially increased in all vaccinated groups two weeks post-booster dose. IgA response was induced by gamma-irradiated vaccines but not formalin-inactivated vaccines. Only PBMC from vaccinated chickens proliferated in response to re-stimulation with P. multocida antigen, indicating vaccine-specific priming. Interestingly, gamma-irradiated vaccines resulted in a higher fold change in mRNA transcripts of IFN-γ (>1000-fold change) IL-6 (>500-fold change), and IL-12p40 (>200-fold change), which are hallmarks of a Th1 dominant response, which is essential to combat intracellular infection. Lastly, the candidate vaccines demonstrated various levels of protection, with Emulsigen-D® containing vaccine rendering complete protection against homologous lethal challenge. In conclusion, gamma-irradiated vaccines can induce broad immune responses, humoral and cellular, and protect against severe outcome of fowl cholera. Therefore, this study has contributed to growing knowledge on the immunogenicity and efficacy of gamma-irradiated vaccines and has shown the potential of such a vaccine platform for field application in extensive as well as intensive farm settings.

Linear Mixed Model of Virus Disinfection by Free Chlorine to Harmonize Data Collected across Broad Environmental Conditions

Despite the critical importance of virus disinfection by chlorine, our fundamental understanding of the relative susceptibility of different viruses to chlorine and robust quantitative relationships between virus disinfection rate constants and environmental parameters remains limited. We conducted a systematic review of virus inactivation by free chlorine and used the resulting data set to develop a linear mixed model that estimates chlorine inactivation rate constants for viruses based on experimental conditions. 570 data points were collected in our systematic review, representing 82 viruses over a broad range of environmental conditions. The harmonized inactivation rate constants under reference conditions (pH = 7.53, T = 20 °C, [Cl-] < 50 mM) spanned 5 orders of magnitude, ranging from 0.0196 to 1150 L mg-1 min-1, and uncovered important trends between viruses. Whereas common surrogate bacteriophage MS2 does not serve as a conservative chlorine disinfection surrogate for many human viruses, CVB5 was one of the most resistant viruses in the data set. The model quantifies the role of pH, temperature, and chloride levels across viruses, and an online tool allows users to estimate rate constants for viruses and conditions of interest. Results from the model identified potential shortcomings in current U.S. EPA drinking water disinfection requirements.

Bubble manipulates the release of viral aerosols in aeration

Bubble bursting is a common phenomenon in many industrial and natural processes, plays an important role in mediating mass transfer across the water-air interface. But the interplay between bubbles and pathogens remains unclear and the mechanisms of virus aerosolization by the bubble properties have not been well studied. The main objective of this study was to evaluate the water-to-air transfer of viruses by bubbles of different sizes. Unlike the dominant view of smaller bubbles less bioaerosols, it was found that the smaller bubbles could generate significantly more viral aerosols regardless of the virus species (Phi6, MS2, PhiX174, and T7), when the Sauter mean bubble diameters were between 0.56 and 1.65 mm under constant aeration flow rate. The mechanism studies denied the possibilities of more aerosols or better dispersion of viruses in the aerosols generated by the smaller bubbles. However, deeper bubbling could transfer more viruses to the air for MS2, PhiX174, and T7. Their concentrations in aerosols were linearly related to the bubbling depth for these non-enveloped viruses, which demonstrates the bubble-scavenging effect as a main mechanism except for the enveloped virus Phi6. Whereas, unlike these three non-enveloped viruses, Phi6 could survive relatively better in the aerosols generated from the smaller bubbles, though the enhancement of aerosolization by the smaller bubbles was much larger than the improvement of survival. Other mechanisms still remain unknown for this enveloped virus. This study suggests that the attempt of decreasing the bubble size in aeration tank of the wastewater treatment plant might significantly increase the solubility of oxygen as well as the risk of viral aerosols.

Development of a non-target strategy for evaluation of potential biological effects of inhalable aerosols generated during purposeful room conditioning using an in vitro inhalation model

OBJECTIVES

An integrated in vitro inhalation approach was outlined to estimate potential adverse acute inhalation effects of aerosols from commercial nebulizer applications used for purposeful room conditioning such as disinfection, scenting or others. Aerosol characterization, exposure estimation and evaluation of acute biological effects by in vitro inhalation were included to generate dose-response data, allowing for determination of in vitro lowest observable adverse effect levels (LOAELs). Correlation of these to estimates of human lung deposition was included for quantitative in vitro to in vivo extrapolation approach (QIVIVE) for acute effects during human exposure.

METHODS

To test the proposed approach, a case study was undertaken using two realistic test materials. An acute in vitro inhalation setup with air-liquid interface A549-cells in an optimized exposure situation (P.R.I.T.® ExpoCube®) was used to expose cells and analysis of relevant biological effects (viability, mitochondrial membrane potential, stress, IL-8 release) was carried out.

RESULTS

The observed dose-responsive effects in a sub-toxic dose-range could be attributed to the main component of one test material and its presence in the aerosol phase of the nebulized material. QIVIVE resulted in a factor of at least 256 between the in vitro LOAEL and the estimated acute human lung exposure for this test material.

CONCLUSIONS

The case-study shows the value of the non-target in vitro inhalation testing approach especially in case of a lack of knowledge on complex product composition. It is expected that approaches like this will be of high value for product safety and environmental health in the future.

A simple and effective aerosol pathogen disinfection test for a flowing air disinfector

Aerosol transmission is an important disease transmission route and has been especially pertinent to hospital and biosafety laboratories during the SARS-CoV-2 pandemic. The thermal resistance of airborne SARS-CoV-2 is lower than that of Bacillus subtilis spores, which are often used to test the effectiveness of SARS-CoV-2 and other pathogen disinfection methods. Herein, we propose a new method to test the disinfection ability of a flowing air disinfector (a digital electromagnetic induction air heater) using B. subtilis spores. The study provides an alternative air disinfection test method. The new test system combined an aerosol generator and a respiratory filter designed in-house and could effectively recover spores on the filter membrane at the air outlet after passing through the flowing air disinfector. The total number of bacterial spores used in the test was within the range of 5 × 10⁵-5 × 10⁶ colony-forming units (CFUs) specified in the technical standard for disinfection. The calculation was based on the calculation method in Air Disinfection Effect Appraisal Test in Technical Standard for Disinfection (2002 Edition). At an air speed of 3.5 m/s, we used a digital electromagnetic induction air heater to disinfect flowing air containing 4.100 × 10⁶ CFUs of B. subtilis spores and determined that the minimum disinfection temperature was 350 °C for a killing rate of 99.99%. At 400 °C, additional experiments using higher spore concentrations (4.700 × 10⁶ ± 1.871 × 10⁵ CFU) and a higher airspeed (4 m/s) showed that the killing rate remained>99.99%. B. subtilis spores, as a biological indicator for testing the efficiency of dry-heat sterilization, were killed by the high temperatures used in this system. The proposed method used to test the flowing air disinfector is simple, stable, and effective. This study provides a reference for the development of test systems that can assess the disinfection ability of flowing air disinfectors.

Stratum Ventilation: Enabling Simultaneous Energy Conservation and Air Purification in Subway Cars

The supply of fresh air for underground rail transit systems is not as simple as opening windows, which is a conventional ventilation (CV) measure adopted in aboveground vehicles. This study aims to improve contaminant dilution and air purification in subway car ventilation systems and the safety of rail transit post-coronavirus disease pandemic era. We designed an air conditioning (AC) terminal system combined with stratum ventilation (SV) to enable energy consumption reduction for subway cars. We experimentally tested the effectiveness of a turbulence model to investigate ventilation in subway cars. Further, we compared the velocity fields of CV and SV in subway cars to understand the differences in their airflow organizations and contaminant removal efficiencies, along with the energy savings of four ventilation scenarios, based on the calculations carried out using computational fluid dynamics. At a ventilation flow rate of 7200 m³/h, the CO₂ concentration and temperature in the breathing areas of seated passengers were better in the SV than in the CV at a rate of 8500 m³/h. Additionally, the energy-saving rate of SV with AC cooling was 14.05%. The study provides new ideas for reducing the energy consumption of rail transit and broadens indoor application scenarios of SV technology.

COVID-19 pandemic lesson learned- critical parameters and research needs for UVC inactivation of viral aerosols

The COVID-19 pandemic highlighted public awareness of airborne disease transmission in indoor settings and emphasized the need for reliable air disinfection technologies. This increased awareness will carry in the post-pandemic era along with the ever-emerging SARS-CoV variants, necessitating effective and well-defined protocols, methods, and devices for air disinfection. Ultraviolet (UV)-based air disinfection demonstrated promising results in inactivating viral bioaerosols. However, the reported data diversity on the required UVC doses has hindered determining the best UVC practices and led to confusion among the public and regulators. This article reviews available information on critical parameters influencing the efficacy of a UVC air disinfection system and, consequently, the required dose including the system's components as well as operational and environmental factors. There is a consensus in the literature that the interrelation of humidity and air temperature has a significant impact on the UVC susceptibility, which translate to changing the UVC efficacy of commercialized devices in indoor settings under varying conditions. Sampling and aerosolization techniques reported to have major influence on the result interpretation and it is recommended to use several sampling methods simultaneously to generate comparable and conclusive data. We also considered the safety concerns and the potential safe alternative of UVC, far-UVC. Finally, the gaps in each critical parameter and the future research needs of the field are represented. This paper is the first step to consolidating literature towards developing a standard validation protocol for UVC air disinfection devices which is determined as the one of the research needs.