Three-dimensional spheroid culture promotes odonto/osteoblastic differentiation of dental pulp cells

Creating 3D constructs with cranial neural crest-derived cell lines using a bio-3D printer

OBJECTIVES

The development of bio-three-dimensional (bio-3D) printers has led to significant advances in regenerative medicine. Three-dimensional constructs, including spheroids, are maintained by extracellular matrix proteins secreted by cells so that the cells can be cultured in conditions closer to the physiological environment. This study aimed to create a useful 3D construct as a model of the dentin-pulp complex.

METHODS

We examined the expression patterns of extracellular matrix proteins and cell proliferation areas in a 3D construct created using O9-1 cells derived from cranial neural crest cells of mice. The 3D construct was created by sticking the spheroid cultures onto a needle array using a bio-3D printer.

RESULTS

Cell proliferation areas along with characteristic expression of tenascin C and DMP1 were evaluated. The expression of tenascin C and DMP1 was significantly enhanced in the spheroids compared to that in two-dimensional cultures. Moreover, cell proliferation regions and tenascin C expression were confirmed in the outer layer of spheroids in the embryonic stem cell medium, with insignificant DMP1 expression being observed. Interestingly, in a 3D construct cultured in calcification-induction medium, DMP1 expression was promoted, and DMP1-positive cells existed in the outermost layer without overlapping with tenascin C expression.

CONCLUSIONS

The extracellular matrix proteins, tenascin C and DMP1, were expressed in a polarized manner in spheroids and 3D constructs, similar to the findings in the dental papilla. Therefore, these 3D constructs show potential as artificial models for studying odontogenesis.

"Biological responses of two calcium-silicate-based cements on a tissue-engineered 3D organotypic deciduous pulp analogue"

OBJECTIVES

The biological responses of MTA and Biodentine™ has been assessed on a three-dimensional, tissue-engineered organotypic deciduous pulp analogue.

METHODS

Human endothelial (HUVEC) and dental mesenchymal stem cells (SHED) at a ratio of 3:1, were incorporated into a collagen I/fibrin hydrogel; succeeding Biodentine™ and MTA cylindrical specimens were placed in direct contact with the pulp analogue 48 h later. Cell viability/proliferation and morphology were evaluated through live/dead staining, MTT assay and Scanning Electron Microscopy (SEM), and expression of angiogenic, odontogenic markers through real time PCR.

RESULTS

Viable cells dominated at day 3 after treatment presenting typical morphology, firmly attached within the hydrogel structures, as shown by live/dead staining and SEM images. MTT assay at day 1 presented a significant increase of cell proliferation in Biodentine™ group. Real-time PCR showed significant upregulation of odontogenic markers DSPP, BMP-2 (day 3,6), RUNX2, ALP (day 3) in contact with Biodentine™ compared to MTA and the control, whereas MTA promoted significant upregulation of DSPP, BMP-2, RUNX2, Osterix (day 3) and ALP (day 6) compared to the control. MSX1 presented downregulation in both experimental groups. Expression of angiogenic markers VEGFa and ANGPT-1 at day 3 was significantly upregulated in contact with Biodentine™ and MTA respectively, while the receptors VEGFR1, VEGFR2 and Tie-2, as well as PECAM-1 were downregulated.

SIGNIFICANCE

Both calcium silicate-based materials are biocompatible and exert positive angiogenic and odontogenic effects, although Biodentine™ during the first days of culture, seems to induce higher cell proliferation and provoke a more profound odontogenic and angiogenic response from SHED.

An in vitro model system based on calcium- and phosphate ion-induced hMSC spheroid mineralization

A challenge in regenerative medicine is creating the three-dimensional organic and inorganic in vitro microenvironment of bone, which would allow the study of musculoskeletal disorders and the generation of building blocks for bone regeneration. This study presents a microwell-based platform for creating spheroids of human mesenchymal stromal cells, which are then mineralized using ionic calcium and phosphate supplementation. The resulting mineralized spheroids promote an osteogenic gene expression profile through the influence of the spheroids' biophysical environment and inorganic signaling and require less calcium or phosphate to achieve mineralization compared to a monolayer culture. We found that mineralized spheroids represent an in vitro model for studying small molecule perturbations and extracellular mediated calcification. Furthermore, we demonstrate that understanding pathway signaling elicited by the spheroid environment allows mimicking these pathways in traditional monolayer culture, enabling similar rapid mineralization events. In sum, this study demonstrates the rapid generation and employment of a mineralized cell model system for regenerative medicine applications.

Fluid flow-induced modulation of viability and osteodifferentiation of periodontal ligament stem cell spheroids-on-chip

Developing physiologically relevant in vitro models for studying periodontitis is crucial for understanding its pathogenesis and developing effective therapeutic strategies. In this study, we aimed to integrate the spheroid culture of periodontal ligament stem cells (PDLSCs) within a spheroid-on-chip microfluidic perfusion platform and to investigate the influence of interstitial fluid flow on morphogenesis, cellular viability, and osteogenic differentiation of PDLSC spheroids. PDLSC spheroids were seeded onto the spheroid-on-chip microfluidic device and cultured under static and flow conditions. Computational analysis demonstrated the translation of fluid flow rates of 1.2 μl min-1 (low-flow) and 7.2 μl min-1 (high-flow) to maximum fluid shear stress of 59 μPa and 360 μPa for low and high-flow conditions, respectively. The spheroid-on-chip microfluidic perfusion platform allowed for modulation of flow conditions leading to larger PDLSC spheroids with improved cellular viability under flow compared to static conditions. Modulation of fluid flow enhanced the osteodifferentiation potential of PDLSC spheroids, demonstrated by significantly enhanced alizarin red staining and alkaline phosphatase expression. Additionally, flow conditions, especially high-flow conditions, exhibited extensive calcium staining across both peripheral and central regions of the spheroids, in contrast to the predominantly peripheral staining observed under static conditions. These findings highlight the importance of fluid flow in shaping the morphological and functional properties of PDLSC spheroids. This work paves the way for future investigations exploring the interactions between PDLSC spheroids, microbial pathogens, and biomaterials within a controlled fluidic environment, offering insights for the development of innovative periodontal therapies, tissue engineering strategies, and regenerative approaches.

3D Organoids for Regenerative Endodontics

Apical periodontitis is the inflammation and destruction of periradicular tissues, mediated by microbial factors originating from the infected pulp space. This bacteria-mediated inflammatory disease is known to interfere with root development in immature permanent teeth. Current research on interventions in immature teeth has been dedicated to facilitating the continuation of root development as well as regenerating the dentin-pulp complex, but the fundamental knowledge on the cellular interactions and the role of periapical mediators in apical periodontitis in immature roots that govern the disease process and post-treatment healing is limited. The limitations in 2D monolayer cell culture have a substantial role in the existing limitations of understanding cell-to-cell interactions in the pulpal and periapical tissues. Three-dimensional (3D) tissue constructs with two or more different cell populations are a better physiological representation of in vivo environment. These systems allow the high-throughput testing of multi-cell interactions and can be applied to study the interactions between stem cells and immune cells, including the role of mediators/cytokines in simulated environments. Well-designed 3D models are critical for understanding cellular functions and interactions in disease and healing processes for future therapeutic optimization in regenerative endodontics. This narrative review covers the fundamentals of (1) the disease process of apical periodontitis; (2) the influence and challenges of regeneration in immature roots; (3) the introduction of and crosstalk between mesenchymal stem cells and macrophages; (4) 3D cell culture techniques and their applications for studying cellular interactions in the pulpal and periapical tissues; (5) current investigations on cellular interactions in regenerative endodontics; and, lastly, (6) the dental-pulp organoid developed for regenerative endodontics.

A Compilation of Study Models for Dental Pulp Regeneration

Efforts to heal damaged pulp tissue through tissue engineering have produced positive results in pilot trials. However, the differentiation between real regeneration and mere repair is not possible through clinical measures. Therefore, preclinical study models are still of great importance, both to gain insights into treatment outcomes on tissue and cell levels and to develop further concepts for dental pulp regeneration. This review aims at compiling information about different in vitro and in vivo ectopic, semiorthotopic, and orthotopic models. In this context, the differences between monolayer and three-dimensional cell cultures are discussed, a semiorthotopic transplantation model is introduced as an in vivo model for dental pulp regeneration, and finally, different animal models used for in vivo orthotopic investigations are presented.

Ultrastructural Characterization of Human Gingival Fibroblasts in 3D Culture

Cell spheroids are applied in various fields of research, such as the fabrication of three-dimensional artificial tissues in vitro, disease modeling, stem cell research, regenerative therapy, and biotechnology. A preclinical 3D culture model of primary human gingival fibroblasts free of external factors and/or chemical inducers is presented herein. The ultrastructure of the spheroids was characterized to establish a cellular model for the study of periodontal tissue regeneration. The liquid overlay technique was used with agarose to generate spheroids. Fibroblasts in 2D culture and cell spheroids were characterized by immunofluorescence, and cell spheroids were characterized by optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, backscattered electrons, and Fourier transform infrared spectroscopy. Ostegenic related genes were analyzed by RT-qPCR. Gingival fibroblasts formed spheroids spontaneously and showed amorphous calcium phosphate nanoparticle deposits on their surface. The results suggest that human gingival fibroblasts have an intrinsic potential to generate a mineralized niche in 3D culture.

Therapeutic potential of dental pulp stem cells and their derivatives: Insights from basic research toward clinical applications

For more than 20 years, researchers have isolated and identified postnatal dental pulp stem cells (DPSCs) from different teeth, including natal teeth, exfoliated deciduous teeth, healthy teeth, and diseased teeth. Their mesenchymal stem cell (MSC)-like immunophenotypic characteristics, high proliferation rate, potential for multidirectional differentiation and biological features were demonstrated to be superior to those of bone marrow MSCs. In addition, several main application forms of DPSCs and their derivatives have been investigated, including stem cell injections, modified stem cells, stem cell sheets and stem cell spheroids. In vitro and in vivo administration of DPSCs and their derivatives exhibited beneficial effects in various disease models of different tissues and organs. Therefore, DPSCs and their derivatives are regarded as excellent candidates for stem cell-based tissue regeneration. In this review, we aim to provide an overview of the potential application of DPSCs and their derivatives in the field of regenerative medicine. We describe the similarities and differences of DPSCs isolated from donors of different ages and health conditions. The methodologies for therapeutic administration of DPSCs and their derivatives are introduced, including single injections and the transplantation of the cells with a support, as cell sheets, or as cell spheroids. We also summarize the underlying mechanisms of the regenerative potential of DPSCs.

Scaffold-free 3D culturing enhance pluripotency, immunomodulatory factors, and differentiation potential of Wharton's jelly-mesenchymal stem cells

Mesenchymal stem cells (MSCs) show a decline in pluripotency and differentiation with increased cell culture passages in 2D cultures. The 2D monolayer culture fails to correctly imitate the architecture and microenvironments of in-vivo cell models. Alternatively, 3D culture may improve the simulations of in-vivo cell microenvironments with wide applications in cell culture and drug discovery. In the present study, we compared various 3D culturing techniques such as 3D micro-well (3D-S), hanging drop (HD), and ultra-low attachment (ULA) plate-based spheroid culture to study their effect on morphology, viability, pluripotency, cell surface markers, immunomodulatory factors, and differentiation capabilities of Wharton's jelly-mesenchymal stem cells (WJ-MSCs). The cell morphology, viability, and senescence of 3D cultured WJ-MSCs were comparable to cells in 2D culture. The expression of pluripotency markers (OCT4, SOX2, and NANOG) was enhanced upto 2-8 fold in 3D cultured WJ-MSCs when compared to 2D culture. Moreover, the immunomodulatory factors (IDO, IL-10, LIF, ANG1, and VEGF) were significantly elevated in ULA based 3D cultured WJ-MSCs. Furthermore, significant enhancement in the differentiation potential of WJ-MSCs towards adipocyte (ADP and C/EBP-α), osteocyte (OPN and RUNX2), and definitive endodermal (SOX17, FOXA2, and CXCR4) lineages in 3D culture conditions were observed. Additionally, the osteogenic and adipogenic differentiation potential of WJ-MSCs over the time points 7 days, 14 days, and 28 days was also significantly increased in 3D culture groups. Our study demonstrates that stemness properties of WJ-MSCs were significantly enhanced in 3D cultures and ULA-based culture outperformed other methods with high pluripotency gene expression and enhanced differentiation potential. This study indicates the efficacy of 3D cultures to bridge the gap between 2D cell culture and animal models in regenerative medicine.

Priming strategies for controlling stem cell fate: Applications and challenges in dental tissue regeneration

Mesenchymal stromal cells (MSCs) have attracted intense interest in the field of dental tissue regeneration. Dental tissue is a popular source of MSCs because MSCs can be obtained with minimally invasive procedures. MSCs possess distinct inherent properties of self-renewal, immunomodulation, proangiogenic potential, and multilineage potency, as well as being readily available and easy to culture. However, major issues, including poor engraftment and low survival rates in vivo, remain to be resolved before large-scale application is feasible in clinical treatments. Thus, some recent investigations have sought ways to optimize MSC functions in vitro and in vivo. Currently, priming culture conditions, pretreatment with mechanical and physical stimuli, preconditioning with cytokines and growth factors, and genetic modification of MSCs are considered to be the main strategies; all of which could contribute to improving MSC efficacy in dental regenerative medicine. Research in this field has made tremendous progress and continues to gather interest and stimulate innovation. In this review, we summarize the priming approaches for enhancing the intrinsic biological properties of MSCs such as migration, antiapoptotic effect, proangiogenic potential, and regenerative properties. Challenges in current approaches associated with MSC modification and possible future solutions are also indicated. We aim to outline the present understanding of priming approaches to improve the therapeutic effects of MSCs on dental tissue regeneration.

Fabrication of Vascularized DPSC Constructs for Efficient Pulp Regeneration

Dental pulp regeneration is a promising approach to restore the vitality of necrotic teeth. We have previously reported the fabrication of scaffold-free cell constructs containing only dental pulp stem cells (DPSCs) and their ability to form pulp-like tissue in the pulpless tooth. However, the DPSC construct could not build pulp-like tissue with a full root length because it is difficult to induce blood vessels from a small root canal foramen. Therefore, we hypothesized that vascular structure could be preformed in the DPSC construct by employing endothelial differentiation capability of DPSCs, and vascularized constructs might facilitate dental pulp regeneration in the pulpless tooth. In this study, vascularized DPSC constructs were fabricated by inducing endothelial differentiation, and then we investigated the behavior of differentiated DPSCs, the internal structure of cell constructs, and their pulp regenerative ability in vivo. We observed that DPSCs positive for CD31 and von Willebrand factor were localized at the outer layer of constructs and formed a reticulated lumen structure. The cells constituting the outer layer of the construct expressed endothelial differentiation markers at higher levels than cells in the inner part. These results indicated that DPSCs in the outer layer differentiated into endothelial cells and formed vascular-like structures in the cell construct. Next, a vascularized DPSC construct was transplanted into the human pulpless tooth that was implanted into immunodeficient mice in the subcutaneous space. After 6 wk of implantation, the vascularized construct formed pulp-like tissues with higher density of human CD31-positive blood vessels when compared with specimens implanted with a DPSC construct without prevascularization. These results suggest that the vascular structure formed in the DPSC construct facilitated the blood supply and enhanced pulp regeneration. This study demonstrates that a vascularized DPSC construct is a prospective biomaterial as an implant for novel dental pulp regeneration.

Comparison of Osteogenic Potentials of Dental Pulp and Bone Marrow Mesenchymal Stem Cells Using the New Cell Transplantation Platform, CellSaic, in a Rat Congenital Cleft-Jaw Model

Scaffolds stimulate cell proliferation and differentiation and play major roles in providing growth and nutrition factors in the repair of bone defects. We used the recombinant peptide Cellnest™ to prepare the three-dimensional stem cell complex, CellSaic, and evaluated whether CellSaic containing rat dental pulp stem cells (rDPSCs) was better than that containing rat bone marrow stem cells (rBMSCs). rDPSC-CellSaic or rBMSC-CellSaic, cultured with or without osteogenic induction medium, formed the experimental and control groups, respectively. Osteoblast differentiation was evaluated in vitro and transplanted into a rat model with a congenital jaw fracture. Specimens were collected and evaluated by microradiology and histological analysis. In the experimental group, the amount of calcium deposits, expression levels of bone-related genes (RUNX2, ALP, BSP, and COL1), and volume of mineralized tissue, were significantly higher than those in the control group (p < 0.05). Both differentiated and undifferentiated rDPSC-CellSaic and only the differentiated rBMSC-CellSaic could induce the formation of new bone tissue. Overall, rBMSC-CellSaic and rDPSC-CellSaic made with Cellnest™ as a scaffold, provide excellent support for promoting bone regeneration in rat mandibular congenital defects. Additionally, rDPSC-CellSaic seems a better source for craniofacial bone defect repair than rBMSC-CellSaic, suggesting the possibility of using DPSCs in bone tissue regenerative therapy.

3D Spheroid Formation Using BMP-Loaded Microparticles Enhances Odontoblastic Differentiation of Human Dental Pulp Stem Cells

Human dental pulp stem cells (hDPSCs) are the primary cells responsible for dentin regeneration. Typically, in order to allow for odontoblastic differentiation, hDPSCs are cultured over weeks with differentiation-inducing factors in a typical monolayered culture. However, monolayered cultures have significant drawbacks including inconsistent differentiation efficiency, require a higher BMP concentration than should be necessary, and require periodic treatment with BMPs for weeks to see results. To solve these problems, we developed a 3D-cell spheroid culture system for odontoblastic differentiation using microparticles with leaf-stacked structure (LSS), which allow for the sustained release of BMPs and adequate supply of oxygen in cell spheroids. BMPs were continuously released and maintained an effective concentration over 37 days. hDPSCs in the spheroid maintained their viability for 5 weeks, and the odontoblastic differentiation efficiency was increased significantly compared to monolayered cells. Finally, dentin-related features were detected in the spheroids containing BMPs-loaded microparticles after 5 weeks, suggesting that these hDPSC-LSS spheroids might be useful for dentin tissue regeneration.

Intravascular Application of Labelled Cell Spheroids: An Approach for Ischemic Peripheral Artery Disease

Mesenchymal stem cells (MSC) are known for their vascular regeneration capacity by neoangiogenesis. Even though, several delivery approaches exist, particularly in the case of intravascular delivery, only limited number of cells reach the targeted tissue and are not able to remain on site. Applicated cells exhibit poor survival accompanied with a loss of functionality. Moreover, cell application techniques lead to cell death and impede the overall MSC function and survival. 3D cell spheroids mimic the physiological microenvironment, thus, overcoming these limitations. Therefore, in this study we aimed to evaluate and assess the feasibility of 3D MSCs spheroids for endovascular application, for treatment of ischemic peripheral vascular pathologies. Multicellular 3D MSC spheroids were generated at different cell seeding densities, labelled with ultra-small particles of iron oxide (USPIO) and investigated in vitro in terms of morphology, size distribution, mechanical stability as well as ex vivo with magnetic resonance imaging (MRI) to assess their trackability and distribution. Generated 3D spheroids were stable, viable, maintained stem cell phenotype and were easily trackable and visualized via MRI. MSC 3D spheroids are suitable candidates for endovascular delivery approaches in the context of ischemic peripheral vascular pathologies.

Sinking Our Teeth in Getting Dental Stem Cells to Clinics for Bone Regeneration

Dental stem cells have been isolated from the medical waste of various dental tissues. They have been characterized by numerous markers, which are evaluated herein and differentiated into multiple cell types. They can also be used to generate cell lines and iPSCs for long-term in vitro research. Methods for utilizing these stem cells including cellular systems such as organoids or cell sheets, cell-free systems such as exosomes, and scaffold-based approaches with and without drug release concepts are reported in this review and presented with new pictures for clarification. These in vitro applications can be deployed in disease modeling and subsequent pharmaceutical research and also pave the way for tissue regeneration. The main focus herein is on the potential of dental stem cells for hard tissue regeneration, especially bone, by evaluating their potential for osteogenesis and angiogenesis, and the regulation of these two processes by growth factors and environmental stimulators. Current in vitro and in vivo publications show numerous benefits of using dental stem cells for research purposes and hard tissue regeneration. However, only a few clinical trials currently exist. The goal of this review is to pinpoint this imbalance and encourage scientists to pick up this research and proceed one step further to translation.

Three-dimensional Spheroid Culture Enhances Multipotent Differentiation and Stemness Capacities of Human Dental Pulp-derived Mesenchymal Stem Cells by Modulating MAPK and NF-kB Signaling Pathways

BACKGROUND

Three-dimensional (3D) culture of mesenchymal stem cells has become an important research and development topic. However, comprehensive analysis of human dental pulp-derived mesenchymal stem cells (DPSCs) in 3D-spheroid culture remains unexplored. Thus, we evaluated the cellular characteristics, multipotent differentiation, gene expression, and related-signal transduction pathways of DPSCs in 3D-spheroid culture via magnetic levitation (3DM), compared with 2D-monolayer (2D) and 3D-aggregate (3D) cultures.

METHODS

The gross morphology and cellular ultrastructure were observed in the 2D, 3D, and 3DM experimental groups using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Surface markers and trilineage differentiation were evaluated using flow cytometry and staining analysis. Quantitative reverse transcription-polymerase chain reaction and immunofluorescence staining (IF) were performed to investigate the expression of differentiation and stemness markers. Signaling transduction pathways were evaluated using western blot analysis.

RESULTS

The morphology of cell aggregates and spheroids was largely influenced by the types of cell culture plates and initial cell seeding density. SEM and TEM experiments confirmed that the solid and firm structure of spheroids was quickly formed in the 3DM-medium without damaging cells. In addition, these three groups all expressed multilineage differentiation capabilities and surface marker expression. The trilineage differentiation capacities of the 3DM-group were significantly superior to the 2D and 3D-groups. The osteogenesis, angiogenesis, adipogenesis, and stemness-related genes were significantly enhanced in the 3D and 3DM-groups. The IF analysis showed that the extracellular matrix expression, osteogenesis, and angiogenesis proteins of the 3DM-group were significantly higher than those in the 2D and 3D-groups. Finally, 3DM-culture significantly activated the MAPK and NF-kB signaling transduction pathways and ameliorated the apoptosis effects of 3D-culture.

CONCLUSIONS

This study confirmed that 3DM-spheroids efficiently enhanced the therapeutic efficiency of DPSCs.

Comparison of 2- and 3-Dimensional Cultured Periodontal Ligament Stem Cells; a Pilot Study

This study compared the characteristics of periodontal ligament stem cells (PDLSCs) cultured using 3-dimensional (3D) versus conventional 2-dimensional (2D) methods. PDLSCs were cultured in either a 3D culture with a non-adhesive culture plate (Stemfit 3D®) or a conventional 2D culture using a 6-well plate. Morphology, viability, proliferation ability, and osteogenic differentiation were analyzed to characterize the differences induced in identical PDLSCs by 3D and 2D culture environments. In addition, gene expression was analyzed using RNA sequencing to further characterize the functional differences. The diameter and the viability of the 3D-cultured PDLSCs decreased over time, but the shape of the spheroid was maintained for 20 days. Although osteogenic differentiation occurred in both the 2D- and 3D-cultured PDLSCs, compared to the control group it was 20.8 and 1.6 higher in the 3D- and 2D-cultured cells, respectively. RNA sequencing revealed that PDLSCs cultured using 2D and 3D methods have different gene expression profiles. The viability of the 3D-cultured cells was decreased, but they showed superior osteogenic differentiation compared to 2D-cultured cells. Within the limitations of this study, the results demonstrate that the structure and function of PDLSCs are influenced by the cell culture method.

Gingiva-derived Mesenchymal Stem Cells and Their Potential Applications in Oral and Maxillofacial Diseases

BACKGROUND

Stem cells are undifferentiated cells with multilineage differentiation potential. They can be collected from bone marrow, fat, amniotic fluid, and teeth. Stem cell-based therapies have been widely used to treat multiple diseases, such as cardiac disease, and hematological disorders. The cells may also be beneficial for controlling the disease course and promoting tissue regeneration in oral and maxillofacial diseases. Oral-derived gingival mesenchymal stem cells are easy to access and the donor sites heal rapidly without a scar. Such characteristics demonstrate the beneficial role of GMSCs in oral and maxillofacial diseases.

OBJECTIVE

We summarize the features of GMSCs, including their self-renewal, multipotent differentiation, immunomodulation, and anti-inflammation properties. We also discuss their applications in oral and maxillofacial disease treatment and tissue regeneration.

CONCLUSION

GMSCs are easily harvestable adult stem cells with outstanding proliferation, differentiation, and immunomodulation characteristics. A growing body of evidence indicates that GMSCs have strong potential use in accelerating wound healing and promoting the regeneration of bone defects, periodontium, oral neoplasms, salivary glands, peri-implantitis, and nerves. Moreover, alginate, polylactic acid and polycaprolactone can be used as biodegradable scaffolds for GMSC encapsulation. Various growth factors can be applied to the corresponding scaffolds to obtain the desired GMSC differentiation and phenotypes. Three-dimensional spheroid culture systems could optimize GMSC properties and improve the performance of the cells in tissue engineering. The immunomodulatory property of GMSCs in controlling oral and maxillofacial inflammation needs further research.

A review of manufacturing capabilities of cell spheroid generation technologies and future development

Spheroid culture provides cells with a three-dimensional environment that can better mimic physiological conditions compared to monolayer culture. Technologies involved in the generation of cell spheroids are continuously being innovated to produce spheroids with enhanced properties. In this paper, we review the manufacturing capabilities of current cell spheroid generation technologies. We propose that spheroid generation technologies should enable tight and robust process controls to produce spheroids of consistent and repeatable quality. Future technology development for the generation of cell spheroids should look into improvement in process control, standardization, scalability and monitoring, in addition to advanced methods of spheroid transfer and characterization.

SCF/C-Kit Signaling Induces Self-Renewal of Dental Pulp Stem Cells

INTRODUCTION

The maintenance of a stem cell pool is imperative to enable healing processes in the dental pulp tissue throughout life. As such, knowing mechanisms underlying stem cell self-renewal is critical to understand pulp pathophysiology and pulp regeneration. The purpose of this study was to evaluate the impact of stem cell factor (SCF) signaling through its receptor tyrosine kinase (c-Kit) on the self-renewal of human dental pulp stem cells (hDPSCs).

METHODS

The hDPSCs were stably transduced with lentiviral vectors expressing shRNA-c-Kit or vector control. The impact of the SCF/c-Kit axis on hDPSC self-renewal was evaluated by using a pulpsphere assay in low attachment conditions and by evaluating the expression of polycomb complex protein Bmi-1 (master regulator of self-renewal) by Western blot and flow cytometry.

RESULTS

The c-Kit-silenced hDPSCs formed fewer pulpspheres when compared with hDPSCs transduced with control vector (P < .05). Evaluation of pulpsphere morphology revealed the presence of 3 distinct sphere types, ie, holospheres, merospheres, and paraspheres. Although c-Kit silencing decreased the number of holospheres compared with control cells (P < .05), it had no effect on the number of merospheres and paraspheres. Recombinant human stem cell factor (rhSCF) increased the number of holospheres (P < .05) and induced dose-dependent Bmi-1 expression in hDPSCs. As expected, the inductive capacity of rhSCF on Bmi-1 expression and fraction of Bmi-1-positive cells was inhibited when we silenced c-Kit in hDPSCs.

CONCLUSIONS

These results unveiled the role of SCF/c-Kit signaling on the self-renewal of hDPSCs and suggested that this pathway enables long-term maintenance of stem cell pools in human dental pulps.

Establishment of in vitro three-dimensional cementocyte differentiation scaffolds to study orthodontic root resorption

Orthodontic-induced root resorption is a severe side effect that can lead to tooth root shortening and loss. Compressive force induces tissue stress in the cementum that covers the tooth root, which is associated with activation of bone metabolism and cementum resorption. To investigate the role of cementocytes in mechanotransduction and osteoclast differentiation, the present study established an in vitro three-dimensional (3D) model replicating cellular cementum and observed the effects of static compression on the cellular behavior of the cementocytes. Cell Counting Kit-8 assay, alkaline phosphatase staining and dentin matrix protein 1 quantification were used to evaluate the cementocyte differentiation in the 3D scaffolds. Cellular viability under static compression was evaluated using live/dead staining, and expression of mineral metabolism-related genes were analyzed via reverse transcription-quantitative PCR. The results suggested that the cementocytes maintained their phenotype and increased the expression of osteoprotegerin (OPG), receptor activator of NF-κB ligand (RANKL) and sclerostin (SOST) in the 3D model compared with cells cultured in two dimensions. Compression force increased cell death and induced osteoclastic differentiation via the upregulation of SOST and RANKL/OPG ratio, and the downregulation of osteocalcin. The effect of compression showed a force magnitude-dependent pattern. The present study established an in vitro model of cellular cementum to study the biology of cementocytes. The results indicated that cementocytes are sensitive to mechanical loading and may serve potential roles in the metabolic regulation of minerals during orthodontic root resorption. These findings provide a novel tool to study biological processes in the field of orthodontics and expand knowledge of the biological function of cementocytes.

In Vitro Characterization of Dental Pulp Stem Cells Cultured in Two Microsphere-Forming Culture Plates

Various three-dimensional (3D) culture methods have been introduced to overcome the limitations of in vitro culture and mimic in vivo conditions. This study aimed to evaluate two microsphere-forming culture methods and a monolayer culture method. We evaluated cell morphology, viability, osteo-, adipo-, and chondrogenic differentiation potential of dental pulp stem cells (DPSCs) cultured in 3D culture plates: ultra-low attachment (ULA) and U-bottomed StemFit 3D (SF) plates, and a two-dimensional (2D) monolayer plate. RNA sequencing (RNA-seq) revealed differentially expressed gene (DEG) profiles of the DPSCs. In contrast to an increasing pattern in the 2D group, cell viability in 3D groups (ULA and SF) showed a decreasing pattern; however, high multilineage differentiation was observed in both the 3D groups. RNA-seq showed significantly overexpressed gene ontology categories including angiogenesis, cell migration, differentiation, and proliferation in the 3D groups. Hierarchical clustering analysis revealed a similar DEG regulation pattern between the 3D groups; however, a comparatively different DEG was observed between the 2D and 3D groups. Taken together, this study shows that DPSCs cultured in microsphere-forming plates present superior multilineage differentiation capacities and demonstrate higher DEG expression in regeneration-related gene categories compared to that in DPSCs cultured in a conventional monolayer plate.

Co-cultured spheroids of human periodontal ligament mesenchymal stem cells and vascular endothelial cells enhance periodontal tissue regeneration

Introduction

Human periodontal ligament mesenchymal stem cells (hPDLMSCs) have been known that they play important roles in homeostasis and regeneration of periodontal tissues. Additionally, spheroids are superior to monolayer-cultured cells. We investigated the characteristics and potential of periodontal tissue regeneration in co-cultured spheroids of hPDLMSCs and human umbilical vein endothelial cells (HUVECs) in vitro and in vivo.

Methods

Co-cultured spheroids were prepared with cell ratios of hPDLMSCs: HUVECs = 1:1, 1:2, and 2:1, using microwell chips. Real-time polymerase chain reaction (PCR) analysis, Enzyme-Linked Immuno Sorbent Assay (ELISA), and nodule formation assay were performed to examine the properties of co-cultured spheroids. Periodontal tissue defects were prepared in the maxillary first molars of rats and subjected to transplantation assay.

Results

The expression levels of stemness markers, vascular endothelial growth factor (VEGF), osteogenesis-related genes were up-regulated in co-cultured spheroids, compared with monolayer and spheroid-cultured hPDLMSCs. The nodule formation was also increased in co-cultured spheroids, compared with monolayer and spheroid cultures of hPDLMSCs. Treatment with co-cultured spheroids enhanced new cementum formation after 4 or 8 weeks of transplantation, although there was no significant difference in the new bone formation between co-cultured spheroids and hPDLMSC spheroids.

Conclusions

We found that co-cultured spheroids enhance the periodontal tissue regeneration. Co-cultured spheroids of hPDLMSCs and HUVECs may be a useful therapy that can induce periodontal tissue regeneration.

Three-Dimensional Spheroid Formation of Cryopreserved Human Dental Follicle-Derived Stem Cells Enhances Pluripotency and Osteogenic Induction Properties

Background

Enhancement and maintenance of the stemness of mesenchymal stem cells (MSCs) is one of the most important factors contributing to the successful in vivo therapeutic application of these cells. In this regard, three-dimensional (3D) spheroid formation has been developed as reliable method for increasing the pluripotency of MSCs. Moreover, using a new protocol, we have previously shown that dental tissues of extracted wisdom teeth can be effectively cryopreserved for subsequent use as a source of autologous stem cells. The main purpose of this study is to analyze the stemness and in vitro osteogenic differentiation potential of 3D spheroid dental MSCs compared with conventional mono-layer cultured MSCs.

Methods

In this study, MSC-characterized stem cells were isolated and cultured from long-term cryopreserved dental follicles (hDFSCs), and then 2D hDFSCs were cultured under 3D spheroid-forming conditions using a newly designed microchip dish. The spheroids (3D hDFSCs) thus produced were investigated and characterized with respect to stemness, MSC marker expression, apoptosis, cell cycle analysis, extracellular matrix (ECM) production, and osteogenic and adipogenic differentiation properties.

Results

In terms of MSC and senescence markers, spheroid cells showed no difference when compared with 2D hDFSCs; however, 3D hDFSCs were observed to have a higher proportion of cell cycle arrest and a larger number of apoptotic cells. Moreover, spheroids showed substantially increased levels of pluripotency marker (early transcription factors) and ECM protein expression. Compared with 2D hDFSCs, there was also a notable enhancement in the osteogenic induction potential of spheroids, although no differences were observed with respect to in vitro adipogenesis.

Conclusion

To the best of our knowledge, this is the first study to demonstrate the application of a spheroid culture system for dental follicle-derived stem cells using a microchip dish. Although further studies are needed, including in vivo transplantation, the results obtained in this study indicate that spheroid hDFSCs derived from cryopreserved dental follicle tissues could be used as a valuable source of autologous stem cells for bone tissue regeneration.

Effect of cell culture density on dental pulp-derived mesenchymal stem cells with reference to osteogenic differentiation

Dental pulp stem cells (DPSCs) are a good source for tissue regeneration, however, the number of DPSCs in the pulp tissue is limited. Cell propagation is essential for tissue engineering using DPSCs and the cell culture conditions may affect the properties of DPSCs. The purpose of this study was to analyze the effect of cell culture condition, especially dense culture condition, on the property and differentiation pathway of DPSCs. We cultured DPSCs under sparse (sDPSCs; 5 × 10³ cells/cm²) or dense (dDPSCs; 1 × 10⁵ cells/cm²) conditions for 4 days and compared their properties. The populations of CD73⁺ and CD105⁺ cells were significantly decreased in dDPSCs. Both groups showed multi-differentiation potential, but mineralized nodule formation was enhanced in dDPSCs. The phosphorylation of focal adhesion kinase (FAK) and phosphoinositide 3-kinase (PI3K) proteins was promoted in dDPSCs, and alkaline phosphatase (ALP) mRNA expression in dDPSCs was abolished in the presence of pan-PI3K and FAK inhibitors. dDPSCs implanted into mouse bone cavities induced more mineralized tissue formation than sDPSCs and control. These findings indicate that dense culture conditions modified the properties of DPSCs and gave rise to osteogenic-lineage commitment via integrin signaling and suggest that dense culture conditions favor the propagation of DPSCs to be used for mineralized tissue regeneration.

A Scaffold-Free Allogeneic Construct From Adipose-Derived Stem Cells Regenerates an Osteochondral Defect in a Rabbit Model

PURPOSE

To determine whether an osteochondral defect could be healed histologically by implanting allogeneic 3-dimensionally formed adipose-derived stem cells (ADSCs) in a rabbit model.

METHODS

Thirty Japanese white rabbits (aged 15-17 weeks) were assigned to 1 of 2 groups. An osteochondral defect (diameter, 4.8 mm; depth, 3 mm) was created in the trochlear groove of the knee using a drill. The defects were left empty in the control group and were filled with cylindrical plugs of allogeneic ADSCs extracted from adipose tissue in the experimental group. Macroscopic scoring, histologic scoring, and immunohistologic stainability of type II collagen were evaluated at 4, 8, and 12 weeks postoperatively.

RESULTS

The macroscopic scores of the healing tissue in the experimental group were significantly greater than those in the control group at 12 weeks (P = .031). Histologically, safranin O staining was noted at 4 weeks and increased gradually over time in the experimental group. The modified International Cartilage Repair Society histologic score in the experimental group was significantly higher than that in the controls at 8 and 12 weeks (14 vs 9 at 8 weeks [P = .008], 18 vs 10 at 12 weeks [P = .007]). The implanted tissue was positive for type II collagen, and stainability increased gradually over time.

CONCLUSIONS

The 3-dimensional scaffold-free allogeneic ADSCs implanted into the osteochondral defect survived, adhered to the defect, increased the stainability of type II collagen gradually over time, and promoted histologic healing in a rabbit model.

CLINICAL RELEVANCE

ADSC implantation designed to promote osteochondral healing may play an important role in osteochondral healing.

Suppression of AKT-mTOR signal pathway enhances osteogenic/dentinogenic capacity of stem cells from apical papilla

BACKGROUND

Stem cells from apical papilla (SCAP) are a subpopulation of mesenchymal stem cells (MSCs) isolated from the apical papilla of the developing tooth root apex of human teeth. Because of their osteogenic/dentinogenic capacity, SCAP are considered as a source for bone and dentin regeneration. However, little is understood about the molecular mechanism of osteogenic/dentinogenic differentiation of SCAP. Phosphoinositide 3 kinase (PI3K)-AKT-mammalian target of rapamycin (mTOR) signal pathway participates in regulating the differentiation of various cell types, such as MSCs. In this study, we examined the role of the PI3K-AKT-mTOR signal pathway in the osteogenic/dentinogenic differentiation of SCAP. Moreover, we challenge to fabricate scaffold-free SCAP-based spheroidal calcified constructs.

METHODS

SCAP were pretreated with or without small interfering RNA for AKT (AKT siRNA), PI3K inhibitor LY294402, and mTOR inhibitor rapamycin and were cultured under osteogenic/dentinogenic differentiation to examine in vitro and in vivo calcified tissue formation. Moreover, SCAP-based cell aggregates were pretreated with or without LY294402 and rapamycin. The cell aggregates were cultured under osteogenic/dentinogenic condition and were analyzed the calcification of the aggregates.

RESULTS

Pretreatment with AKT siRNA, LY294402, and rapamycin enhances the in vitro and in vivo calcified tissue-forming capacity of SCAP. SCAP were fabricated as scaffold-free spheroids and were induced into forming calcified 3D constructs. The calcified density of the spheroidal constructs was enhanced when the spheroids were pretreated with LY294402 and rapamycin.

CONCLUSIONS

Our findings indicate that the suppression of PI3K-AKT-mTOR signal pathway plays a role in not only enhancing the in vivo and in vitro osteogenic/dentinogenic differentiation of SCAP, but also promoting the calcification of scaffold-free SCAP-based calcified constructs. These findings suggest that a suppressive regulation of PI3K-AKT-mTOR signal pathway is a novel approach for SCAP-based bone and dentin regeneration.

Dental Pulp Stem Cell-Derived, Scaffold-Free Constructs for Bone Regeneration

In the present study, a scaffold-free tissue construct was developed as an approach for the regeneration of tissue defects, which produced good outcomes. We fabricated a scaffold-free tissue construct from human dental pulp stem cells (hDPSCs construct), and examined the characteristics of the construct. For its fabrication, basal sheets prepared by 4-week hDPSCs culturing were subjected to 1-week three-dimensional culture, with or without osteogenic induction, whereas hDPSC sheets (control) were fabricated by 1-week culturing of basal sheets on monolayer culture. The hDPSC constructs formed a spherical structure and calcified matrix that are absent in the control. The expression levels for bone-related genes in the hDPSC constructs were significantly upregulated compared with those in the control. Moreover, the hDPSC constructs with osteogenic induction had a higher degree of calcified matrix formation, and higher expression levels for bone-related genes, than those for the hDPSC constructs without osteogenic induction. These results suggest that the hDPSC constructs with osteogenic induction are composed of cells and extracellular and calcified matrices, and that they can be a possible scaffold-free material for bone regeneration.

Strontium ranelate promotes odonto-/osteogenic differentiation/mineralization of dental papillae cells in vitro and mineralized tissue formation of the dental pulp in vivo

This study examined the effects and mechanisms of strontium ranelate (SrRn)-a drug used to treat osteoporosis-on the proliferation and differentiation/mineralization of cloned dental pulp-like cells (mouse dental papillae cells; MDPs). It also determined whether topical application of SrRn to exposed dental pulp tissue promotes the formation of mineralized tissue in vivo. The MDPs were cultured with or without SrRn, and cell proliferation, odonto-/osteoblastic gene expression, mineralized nodule formation, and Akt phosphorylation were evaluated. The formation of mineralized tissue in SrRn-treated pulp tissue in rat upper first molars was evaluated histologically. The SrRn up-regulated cell proliferation and expression of Alp (alkaline phosphatase), Bsp (bone sialoprotein), Dmp (dentin matrix acidic phosphoprotein)-1, Dspp (dentin sialophosphoprotein), and Oc (osteocalcin) in a dose-dependent manner. Mineralized nodule formation was also enhanced by SrRn. NPS-2143, a calcium-sensing receptor (CaSR) antagonist, and siRNA against the CaSR gene blocked SrRn-induced proliferation, odonto-/osteoblastic gene expression, and mineralized nodule formation. SrRn induced Akt phosphorylation, and this was blocked by NPS-2143. Topical application of SrRn to exposed rat molar pulps induced the formation of osteodentin-like mineralized tissue. Our study revealed for the first time that SrRn promotes proliferation and odonto-/osteogenic differentiation/mineralization of MDPs via PI3K/Akt signaling activated by CaSR in vitro; mineralized tissue forms from the dental pulp in vivo.

Spheroid culture enhances osteogenic potential of periodontal ligament mesenchymal stem cells

OBJECTIVE AND BACKGROUND

Human periodontal ligament mesenchymal stem cells (hPDLMSCs) are reported to be responsible for homeostasis and regeneration of periodontal tissue. Although hPDLMSCs are commonly cultured in monolayers, monolayer cultures have been reported as inferior to 3-dimensional cultures such as spheroids, which are spherical clusters of cells formed by self-assembly. The aim of this study was to examine the osteogenic phenotype of spheroids of hPDLMSCs, compared with monolayer cultures of hPDLMSC, in vitro and in vivo.

MATERIAL AND METHODS

Spheroids were formed using microwell chips that were tagged with polyethylene glycol. Mesenchymal stem cell (MSC) markers in hPDLMSC spheroids were examined by flow cytometer. Real-time polymerase chain reaction analysis was examined to measure the expressions of stemness markers and osteogenesis-related genes in monolayer and spheroid-cultured hPDLMSCs. Immunofluorescence analysis was performed to confirm protein expressions of stemness markers in PDLMSC spheroids. Nodule formation assay, alkaline phosphatase (ALP) activity assay and transplantation assay in a mouse calvarial defect model were performed to confirm the osteogenic potential of hPDLMSC spheroids. To elucidate the mechanism of spheroid culture enhanced osteogenesis in hPDLMSCs with osteoinductive medium (OIM), a small interfering RNA (siRNA) assay targeted with secreted frizzled-related protein 3 (SFRP3) was examined. The levels of SFRP3 expression in monolayer and spheroid-cultured hPDLMSCs with OIM were measured by real-time polymerase chain reaction and western blotting analysis. ALP gene expression and ALP activity were examined in SFRP3-deficient hPDLMSC spheroids.

RESULTS

The hPDLMSC spheroids expressed MSC markers, which were similar to hPDLMSCs grown in monolayer cultures. Intriguingly, the protein and mRNA expressions of transcription factors that regulate "stemness" were significantly increased in hPDLMSC spheroids, compared with hPDLMSCs in monolayer cultures. Nodule formation by hPDLMSCs was significantly increased in spheroid cultures grown with OIM, compared with monolayer-cultured hPDLMSCs. ALP activity and expression of osteogenesis-related genes were also significantly enhanced in hPDLMSC spheroids, compared with monolayer cultures. Treatment with hPDLMSC spheroids significantly enhanced new bone formation in a murine calvarial defect model, compared with hPDLMSCs in monolayer culture. Finally, to elucidate mechanisms by which spheroid culture enhances ALP activation in hPDLMSCs grown with OIM, an siRNA assay was used to manipulate expression of SFRP3, a Wnt signaling antagonist. Knockdown of SFRP3 suppressed ALP gene expression in hPDLMSCs grown in OIM; further, it suppressed ALP activity in spheroid culture. These data suggest that the enhancement of osteogenic potential in hPDLMSC spheroids is regulated through SFRP3-mediated ALP activation.

CONCLUSION

Spheroid cultures of hPDLMSCs may be a novel and useful tool in regenerative medicine.

Pulp Regeneration by 3-dimensional Dental Pulp Stem Cell Constructs

Dental pulp regeneration therapy for the pulpless tooth has attracted recent attention, and clinical trial studies are underway with the tissue engineering approach. However, there remain many concerns, including the extended period for regenerating the dental pulp. In addition, the use of scaffolds increases the risk of inflammation and infection. To establish a basic technology for novel dental pulp regenerative therapy that allows transplant of pulp-like tissue, we attempted to fabricate scaffold-free 3-dimensional (3D) cell constructs composed of dental pulp stem cells (DPSCs). Furthermore, we assessed viability of these 3D DPSC constructs for dental pulp regeneration through in vitro and in vivo studies. For the in vitro study, we obtained 3D DPSC constructs by shaping sheet-like aggregates of DPSCs with a thermoresponsive hydrogel. DPSCs within constructs remained viable even after prolonged culture; furthermore, 3D DPSC constructs possessed a self-organization ability necessary to serve as a transplant tissue. For the in vivo study, we filled the human tooth root canal with DPSC constructs and implanted it subcutaneously into immunodeficient mice. We found that pulp-like tissues with rich blood vessels were formed within the human root canal 6 wk after implantation. Histologic analyses revealed that transplanted DPSCs differentiated into odontoblast-like mineralizing cells at sites in contact with dentin; furthermore, human CD31-positive endothelial cells were found at the center of regenerated tissue. Thus, the self-organizing ability of 3D DPSC constructs was active within the pulpless root canal in vivo. In addition, blood vessel-rich pulp-like tissues can be formed with DPSCs without requiring scaffolds or growth factors. The technology established in this study allows us to prepare DPSC constructs with variable sizes and shapes; therefore, transplantation of DPSC constructs shows promise for regeneration of pulpal tissue in the pulpless tooth.

Low oxygen tension modulates the osteogenic differentiation of mouse embryonic stem cells

This study examined the effects of low oxygen tension on the osteogenic differentiation of embryonic stem cells (ESCs) in a three-dimensional culture system. The high expression levels of hypoxia-related proteins hypoxia-inducible factor-1α and vascular endothelial growth factor were first validated in ESCs subjected to hypoxic conditions compared with normoxic controls. The osteogenic differentiation of hypoxic ESCs with either osteogenic or osteogenic factor-free media was subsequently evaluated by measuring alkaline phosphatase activity, intracellular calcium levels, matrix mineralization, and the protein levels of osteogenic markers Runt-related transcription factor 2 and osterix. We confirmed that hypoxia significantly stimulated ESC osteogenic activity; the strongest stimulation of ESC osteogenesis was exerted when cells were grown in osteogenic media. To identify differentially expressed genes associated with hypoxia-induced ESC differentiation, we performed microarray analysis of ESCs cultured in osteogenic media under normoxic and hypoxic conditions. This study demonstrated that differences in oxygen tension induced the differential expression of genes known to play roles in such processes as skeletal system development and signaling pathways for bone morphogenetic protein, Wnt, Notch, mitogen-activated protein kinase, and integrin. These findings reveal the effects of low oxygen tension on osteogenic progression in ESCs and provide insight into the molecular pathways that regulate ESC differentiation following exposure to hypoxia.

A comprehensive analysis of human dental pulp cell spheroids in a three-dimensional pellet culture system

OBJECTIVE

Three-dimensional (3D) cell culture methods are of high importance to studies of biological processes. This is particularly the case with spheroid cultures, which create 3D cell aggregates without the use of exogenous materials. Compared to conventional monolayer cultures, cellular spheroid cultures have been demonstrated to improve multilineage potential and extracellular matrix production. To address this issue in depth, we present a more comprehensive analysis of 3D human dental pulp cell (hDPC) spheroids.

DESIGN

hDPC spheroids were fabricated by the pellet culture method and were cultured without adding any reagent to induce differentiation. The gene-expression profiles of the 3D and two-dimensional (2D) cultured hDPCs were compared by complementary DNA microarray analysis. Odontoblastic and osteoblastic differentiation marker gene expression was evaluated by quantitative real-time PCR (RT-qPCR). Hematoxylin-eosin (HE) staining and transmission electron microscopy (TEM) were applied to examine the morphology of hDPC spheroids and extracellular matrix components.

RESULTS

Compared with 2D monolayer culture, microarray analysis identified 405 genes and 279 genes with twofold or greater differential expression after 3 days and 28 days of 3D culture, respectively. In 3D hDPC spheroids, gene ontology analysis revealed upregulation of extracellular matrix-related genes and downregulation of cell growth-related genes. RT-qPCR analysis showed higher expression levels of osteocalcin, dentin sialophosphoprotein, and alkaline phosphatase. TEM revealed the morphological characteristics of the fibrillar collagen-rich matrix and cell-cell interactions.

CONCLUSIONS

The present findings provide clues to understanding the mechanisms of pellet-cultured hDPCs and contribute to future research in the comparative studies of different 3D culture methods.

EDTA Treatment for Sodium Hypochlorite-treated Dentin Recovers Disturbed Attachment and Induces Differentiation of Mouse Dental Papilla Cells

INTRODUCTION

The disturbance of cellular attachment to dentin by sodium hypochlorite (NaOCl) may hamper pulp tissue regeneration. The aims of this study were to examine the recovering effect of EDTA on the attachment/differentiation of stemlike cells and to address the mechanisms of EDTA-induced recovery under the hypothesis that attachment to the exposed dentin matrix and the subsequent activation of integrin/phosphatidylinositol 3-kinase (PI3K) signaling play a crucial role.

METHODS

Mouse dental papilla (MDP) cells were cultured on bovine dentin disks treated with NaOCl (0%, 1.5%, or 6%) followed by EDTA (0%, 3%, or 17%). Cell attachment was evaluated by cell density, viability, and scanning and transmission electron microscopy. Odonto-/osteoblastic gene expression in attached MDP cells was analyzed with or without a pan-PI3K inhibitor (LY294002) using real-time polymerase chain reaction.

RESULTS

NaOCl treatment (1.5%, 10 minutes) significantly diminished attached MDP cells (P < .00001), but EDTA treatment (3% and 17%, ≥10 minutes) of NaOCl-pretreated dentin induced a significant increase in attached cells (P < .05). Ultrastructurally, MDP cells on EDTA-treated dentin showed attachment to exposed collagen fibers. MDP cells cultured on EDTA-treated disks (with or without 1.5% NaOCl pretreatment) showed significant up-regulation of alkaline phosphatase, dentin matrix protein 1, and dentin sialophosphoprotein messenger RNAs (P < .05). Alkaline phosphatase expression was down-regulated by LY294002 (P < .05).

CONCLUSIONS

Under the present experimental conditions, 10 minutes of EDTA treatment was sufficient to recover attachment/differentiation of MDP cells on 1.5% NaOCl-pretreated dentin. EDTA-induced exposure of collagen fibers and subsequent activation of integrin/PI3K signaling may contribute, at least partly, to the recovery.

Odontoblast-like differentiation and mineral formation of pulpsphere derived cells on human root canal dentin in vitro

BACKGROUND

The revitalization or regeneration of the dental pulp is a preferable goal in current endodontic research. In this study, human dental pulp cell (DPC) spheres were applied to human root canal samples to evaluate their potential adoption for physiological tissue-like regeneration of the dental root canal by odontoblastic differentiation as well as cell-induced mineral formation.

METHODS

DPC were cultivated into three-dimensional cell spheres and seeded on human root canal specimens. The evaluation of sphere formation, tissue-like behavior and differentiation as well as mineral formation of the cells was carried out with the aid of optical light microscopy, immunohistochemical staining and scanning electron microscopy (SEM).

RESULTS

Spheres and cells migrated out of the spheres showed an intense cell-cell- and cell-dentin-contact with the formation of extra cellular matrix. In addition, the ingrowth of cell processes into dentinal tubules and the interaction of cell processes with the tubule walls were detected by SEM-imaging. Immunohistochemical staining of the odontoblast specific matrix proteins, dentin matrix protein-1, and dentin sialoprotein revealed an odontoblast-like cell differentiation in contact with the dentin surface. This differentiation was confirmed by SEM-imaging of cells with an odontoblast specific phenotype and cell induced mineral formation.

CONCLUSIONS

The results of the present study reveal the high potential of pulp cells organized in spheres for dental tissue engineering. The odontoblast-like differentiation and the cell induced mineral formation display the possibility of a complete or partial "dentinal filling" of the root canal and the opportunity to combine this method with other current strategies.

Formation of spheroids by dental pulp cells in the presence of hypoxia and hypoxia mimetic agents

AIM

To evaluate the impact of hypoxia and hypoxia mimetic agents (HMA) on the formation and activity of spheroids by dental pulp cells (DPC).

METHODOLOGY

DPC on agarose-coated plates were treated with hypoxia and the HMA dimethyloxallyl glycine (DMOG), desferrioxamine (DFO) and L-mimosine (L-MIM). Images of spheroids were taken directly after seeding and at 6 h and 24 h. Spheroid sizes were quantified by area measurement with ImageJ software. Viability was assessed with Live-Dead staining, MTT and resazurin-based toxicity assay. Production of VEGF, IL-8 and SDF-1 was evaluated using immunoassays. Data were analysed using Kruskal-Wallis test and post hoc Mann-Whitney U-test.

RESULTS

DPC formed spheroids in the presence of hypoxia, HMA and combined treatment with hypoxia and HMA. No pronounced difference in spheroid size was found in the groups treated with hypoxia, DMOG, DFO, L-MIM and the combination of hypoxia and the HMA relative to their normoxic controls (P > 0.05). Spheroids appeared vital in Live-Dead and MTT staining and the resazurin-based toxicity assay. Evaluation of protein production with immunoassays revealed significantly enhanced levels of VEGF and IL-8 (P < 0.05), but there was no significant effect on SDF-1 production (P > 0.05). Treatment with a combination of hypoxia and HMA did not further boost VEGF and IL-8 production (P > 0.05).

CONCLUSIONS

Pre-conditioning with hypoxia and HMA increased the pro-angiogenic capacity of spheroids whilst not interfering with their formation. Pre-clinical studies will reveal whether pre-conditioning of spheroids with hypoxia and HMA can effectively improve the efficiency of cell transplantation approaches for regenerative endodontics.

Properties of Dental Pulp-derived Mesenchymal Stem Cells and the Effects of Culture Conditions

Dental pulp mesenchymal stem cells (DPMSCs) highly express mesenchymal stem cell markers and possess the potential to differentiate into neural cells, osteoblasts, adipocytes, and chondrocytes. Thus, DPMSCs are considered suitable for tissue regeneration. The colony isolation method has commonly been used to collect relatively large amounts of heterogeneous DPMSCs. Homogenous DPMSCs can be isolated by fluorescence-activated cell sorting using antibodies against mesenchymal stem cell markers, although this method yields a limited number of cells. Both quality and quantity of DPMSCs are critical to regenerative therapy, and cell culture methods need to be improved. We thus investigated the properties of DPMSCs cultured with different methods. DPMSCs in a three-dimensional spheroid culture system, which is similar to the hanging drop culture for differentiation of embryonic stem cells, showed upregulation of odonto-/osteoblastic markers and mineralized nodule formation. This suggests that this three-dimensional spheroid culturing system for DPMSCs may be suitable for inducing hard tissues. We further examined the effect of cell culture density on the properties of DPMSCs because the properties of stem cells can be altered depending on the cell density. DPMSCs cultured under the confluent cell density condition showed slight downregulation of some mesenchymal stem cell markers compared with those under the sparse condition. The ability of DPMSCs to differentiate into hard tissue-forming cells was found to be enhanced in the confluent condition, suggesting that the confluent culture condition may not be suitable for maintaining the stemness of DPMSCs. When DPMSCs are to be used for hard tissue regeneration, dense followed by sparse cell culture conditions may be a better alternative strategy.

Three-dimensional Sphere-forming Cells Are Unique Multipotent Cell Population in Dental Pulp Cells

INTRODUCTION

Mesenchymal stem cells (MSCs) are typically cultured as adherent monolayer using a conventional tissue culture technique. However, this technique incompletely reproduces an in vivo microenvironment of stem cells and results in the loss of stemness properties. Three-dimensional (3D) sphere culture is one of the most widely used 3D culture techniques that have been developed to recapitulate the in vivo microenvironment. However, the stemness and multilineage differentiation capacity of spheres derived from dental pulp stem cells (DPSCs) have not been well investigated.

METHODS

DPSCs were cultured and examined for the sphere-forming ability in serum-free, nonadherent conditions. The expression of pluripotency transcription factors was assayed by reverse transcription quantitative polymerase chain reaction and Western blot analysis. The expression of MSC-associated markers was determined by flow cytometry. Multilineage differentiation capacity was examined by alkaline phosphatase, alizarin red S, and oil red O assays. Subcutaneous transplantation in nude mice was used to examine the in vivo mineralized tissue-forming ability of sphere and adherent monolayer cells derived from DPSCs.

RESULTS

We showed that DPSCs form spheres. DPSC spheres exhibited a distinct stem cell phenotype characterized by robust expression of pluripotency transcription factors and decreased expression of MSC-associated markers compared with their corresponding adherent monolayer cells. Functionally, DPSC spheres exhibited enhanced in vitro multilineage differentiation capacity. The expression of multilineage differentiation-related genes was also highly increased in DPSC spheres. Furthermore, DPSC sphere cells possessed higher in vivo mineralized tissue-forming ability than adherent monolayer cells.

CONCLUSIONS

Our findings indicate that sphere-forming cells are unique multipotent cell populations in DPSCs. Our study further suggests that DPSC spheres may provide a unique opportunity for pulp tissue regeneration.

Unique Regenerative Mechanism to Replace Bone Lost During Dietary Bone Depletion in Weanling Mice

The present study was undertaken to determine the mechanism whereby calcitropic hormones and mesenchymal stem cell progeny changes are involved in bone repletion, a regenerative bone process that restores the bone lost to calcium deficiency. To initiate depletion, weanling mice with a mixed C57BL/6 (75%) and CD1 (25%) genetic background were fed a calcium-deficient diet (0.01%) for 14 days. For repletion, the mice were fed a control diet containing 1.2% calcium for 14 days. Depletion decreased plasma calcium and increased plasma parathyroid hormone, 1,25(OH)2D (calcitriol), and C-terminal telopeptide of type I collagen. These plasma parameters quickly returned toward normal on repletion. The trabecular bone volume and connectivity decreased drastically during depletion but were completely restored by the end of repletion. This bone repletion process largely resulted from the development of new bone formation. When bromodeoxyuridine (BrdU) was administered in the middle of depletion for 3 days and examined by fluorescence-activated cell sorting at 7 days into repletion, substantial increases in BrdU incorporation were seen in several CD105 subsets of cells of osteoblastic lineage. When BrdU was administered on days 1 to 3 of repletion and examined 11 days later, no increases in BrdU were seen in these subsets. Additionally, osteocytes that stained positively for BrdU were increased during depletion. In conclusion, the results of the present study have established a unique regenerative mechanism to initiate bone repair during the bone insult. Calcium homeostatic mechanisms and the bone repletion mechanism are opposing functions but are simultaneously orchestrated such that both endpoints are optimized. These results have potential clinical relevance for disease entities such as type 2 osteoporosis.

Scaffold-Free Tissue-Engineered Allogenic Adipose-Derived Stem Cells Promote Meniscus Healing

PURPOSE

To determine whether meniscal tissue could be healed histologically by the implantation of allogenic three-dimensional formed adipose-derived stem cells (ADSCs) in a rabbit model of partial meniscectomy.

METHODS

Forty Japanese white rabbits (aged 15-17 weeks) were assigned to 2 groups. Defects 1.5 mm in diameter were created in the anterior horn of the medial menisci. The defects were left empty in the control group and were filled with cylindrical plugs of allogenic ADSCs extracted from adipose tissue in the experimental group. Macroscopic scoring (range, 0-3), histological scoring (range, 0-12), and immunohistological stainability of type I collagen were evaluated at 2, 4, 8, and 12 weeks postoperatively (n = 5 rabbits for each week).

RESULTS

Macroscopically, the height of the healing tissue in the experimental group was significantly greater than that of the control group at 2 weeks (3 vs 0, P = .01), 4 weeks (3 vs 1, P = .01), and 8 weeks (3 vs 2, P = .02). Histologically, safranin-O staining was noted at 2 weeks and increased gradually over time in the experimental group. In contrast, the intensity of staining was lower in controls at all weeks. Tissue quality scores were significantly higher in the experimental group than in the controls at all weeks (3 vs 0 at 2 weeks [P = .00009], 4.5 vs 2 at 4 weeks [P = .00023], 9 vs 5 at 8 weeks [P = .0047], 10.5 vs 6 at 12 weeks [P = .00026]). The implanted tissue was positive for type I collagen, and stainability was increased gradually over time.

CONCLUSIONS

Three-dimensional scaffold-free allogenic ADSCs implanted into a 1.5-mm avascular meniscal defect survived, adhered to the defect, and promoted histological meniscus healing in a rabbit model.

CLINICAL RELEVANCE

ADSC implantation designed to promote meniscal healing may play an important role as a tool for meniscus healing.

3D Cell Culturing and Possibilities for Myometrial Tissue Engineering

Research insights into uterine function and the mechanisms of labour have been hindered by the lack of suitable animal and cellular models. The use of traditional culturing methods limits the exploration of complex uterine functions, such as cell interactions, connectivity and contractile behaviour, as it fails to mimic the three-dimensional (3D) nature of uterine cell interactions in vivo. Animal models are an option, however, use of these models is constrained by ethical considerations as well as translational limitations to humans. Evidence indicates that these limitations can be overcome by using 3D culture systems, or 3D Bioprinters, to model the in vivo cytological architecture of the tissue in an in vitro environment. 3D cultured or 3D printed cells can be used to form an artificial tissue. This artificial tissue can not only be used as an appropriate model in which to study cellular function and organisation, but could also be used for regenerative medicine purposes including organ or tissue transplantation, organ donation and obstetric care. The current review describes recent developments in cell culture that can facilitate the development of myometrial 3D structures and tissue engineering applications.

Odontoblasts: Specialized hard-tissue-forming cells in the dentin-pulp complex

Odontoblasts are specialized cells that produce dentin and exhibit unique morphological characteristics; i.e., they extend cytoplasmic processes into dentinal tubules. While osteoblasts, which are typical hard-tissue-forming cells, are generated from mesenchymal stem cells during normal and pathological bone metabolism, the induction of odontoblasts only occurs once during tooth development, and odontoblasts survive throughout the lives of healthy teeth. During the differentiation of odontoblasts, signaling molecules from the inner enamel epithelium are considered necessary for the differentiation of odontoblast precursors, i.e., peripheral dental papilla cells. If odontoblasts are destroyed by severe external stimuli, such as deep caries, the differentiation of dental pulp stem cells into odontoblast-like cells is induced. Various bioactive molecules, such as non-collagenous proteins, might be involved in this process, although the precise mechanisms responsible for odontoblast differentiation have not been fully elucidated. Recently, our knowledge about the other functional activities of odontoblasts (apart from dentin formation) has increased. For example, it has been suggested that odontoblasts might act as nociceptive receptors, and surveillance cells that detect the invasion of exogenous pathogens. The regeneration of the dentin-pulp complex has recently gained much attention as a promising future treatment modality that could increase the longevity of pulpless teeth. Finally, congenital dentin anomalies, which are concerned with the disturbance of odontoblast functions, are summarized.

Mesenchymal stem cell spheroids exhibit enhanced in-vitro and in-vivo osteoregenerative potential

Background

Mesenchymal stem cells (MSCs) are a favored cell source for regenerative medicine because of their multilinage potential. However, the conventional monolayer technique used to culture MSCs, inadequately overcomes their low differentiation capacity. Culture of MSCs in multicellular spheroids, more accurately mimics the in-vivo microenvironment; thus, resolving this problem. In this study, we assessed whether the osteoregenerative potential of MSC spheroids is greater than that of monolayer MSCs.

Results

MSC spheroids were generated from rat MSCs (rMSCs) using low-binding plates. Real-time reverse transcription-polymerase chain reaction and immunocytochemical analysis indicated that osteogenic properties were accelerated in MSC spheroids compared with monolayer rMSCs when treated with an osteoblast-inducer reagent for 7 days. Moreover, increased calcium deposition was visualized in MSC spheroids using Alizarin red staining. In a rat calvarial defect model, micro-computed tomography and histological assays showed that MSC spheroid-engrafted defects experienced enhanced bone regeneration.

Conclusions

Our in-vitro and in-vivo results reveal that MSCs in the spheroid culture exhibit enhanced osteoregenerative efficiency compared with monolayer MSCs.

Stromal-cell-derived extracellular matrix promotes the proliferation and retains the osteogenic differentiation capacity of mesenchymal stem cells on three-dimensional scaffolds

To date, expansion of bone-marrow-derived mesenchymal stem cells (MSCs) is typically carried out on two-dimensional (2D) tissue culture plastic. Since this 2D substratum is very different from the physiological situation, MSCs gradually lose their unique multipotent properties during expansion. Recently, the role of the extracellular matrix (ECM) microenvironment ("niche") in facilitating and regulating stem cell behavior in vivo has been elucidated. As a result, investigators have shifted their efforts toward developing three-dimensional (3D) scaffolds capable of functioning like the native tissue ECM. In this study, we demonstrated that stromal-cell-derived ECM, formed within a collagen/hydroxyapatite (Col/HA) scaffold to mimic the bone marrow "niche," promoted MSC proliferation and preserved their differentiation capacity. The ECM was synthesized by MSCs to reconstitute the tissue-specific 3D microenvironment in vitro. Following deposition of the ECM inside Col/HA scaffold, the construct was decellularized and reseeded with MSCs to study their behavior. The data showed that MSCs cultured on the ECM-Col/HA scaffolds grew significantly faster than the cells from the same batch cultured on the regular Col/HA scaffolds. In addition, MSCs cultured on the ECM-Col/HA scaffolds retained their "stemness" and osteogenic differentiation capacity better than MSCs cultured on regular Col/HA scaffolds. When ECM-Col/HA scaffolds were implanted into immunocompromised mice, with or without loading MSCs, it was found that those scaffolds formed less bone as compared with regular Col/HA scaffolds (i.e., without ECM), in both cases of with or without loading MSCs. The in vivo study further confirmed that the ECM-Col/HA scaffold was a suitable mimic of the bone marrow "niche." This novel 3D stromal-cell-derived ECM system has the potential to be developed into a biomedical platform for regenerative medicine applications.