Impact of pH-adjusted fluoride and stannous solutions on the protective properties on the pellicle layer in vitro and in situ

This study evaluates the ideal pH for anti-erosion and anti-adherent efficacy of fluoride and stannous solutions (sodium fluoride (SF), amine fluoride (AF), sodium monofluorophosphate (SMFP), stannous fluoride (SnF2) with 500 ppm fluoride concentration each and stannous chloride (SnCl2, 1563 ppm stannous)). In vitro, solutions were tested at pH 4.5 and 5.5. The main in situ experiments were carried out at the pH of 4.5: For pellicle formation 6 volunteers wore bovine enamel slabs intraorally for 1 min, rinsed with 8 ml solution for 1 min and continued for up to 30 min/8 h. Physiological pellicle samples served as controls. After incubation in HCl (2.0, 2.3) for 2 min mineral release was determined photometrically. Bacterial counts on 8 h biofilms were determined by fluorescence microscopy (BacLight™ and DAPI with Concanavalin A). Modification of the pellicle ultrastructure was examined by TEM. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney-U tests with Bonferroni-correction (p < 0.05). SnF2 showed a significant erosion protection. AF, SnF2, and SnCl2 were most anti-adherent. SnF2 and SnCl2 caused a pronounced basal pellicle with stannous precipitates. Compared to other fluoride monosubstances, stannous ions offer greater protection against erosive acidic attacks. Stannous ions act as crucial co-factor in this process.

Polarization-Sensitive Optical Coherence Tomography for Monitoring De- and Remineralization of Bovine Enamel In Vitro

Early caries diagnosis still challenges dentistry. Polarization-sensitive optical coherence tomography (PS-OCT) is promising to detect initial lesions non-invasively in depth-resolved cross-sectional visualization. PS-OCT with determined degree of polarization (DOP) imaging provides an intuitive demineralization contrast. The aim of this study is to evaluate the suitability of DOP-based PS-OCT imaging to monitor controlled de- and remineralization progression for the first time and to introduce it as a valid, non-destructive in vitro detection method. Twelve standardized bovine enamel specimens were divided in different groups and demineralized with hydrochloric acid (HCl) as well as partly remineralized with fluoride over a 14-day pH-cycling experiment. The specimens were stored in artificial saliva and sodium chloride (NaCl), respectively. Progress measurements with PS-OCT were made with polarization-sensitive en faceand B-scan mode for qualitative evaluation. The specimens demineralized in HCl showed the most pronounced surface change (lowest DOP) and the most significant increase in depolarization. Additional fluoride treatment and the storage in artificial saliva resulted in the opposite (highest DOP). Therefore, DOP-based PS-OCT imaging appears to be a valuable technique for visualization and monitoring of enamel demineralization and remineralization processes in vitro. However, these findings need to be confirmed in human teeth ex vivo or in situ.

Tooth-composite bond failure with a universal and an etch-and-rinse adhesive depending on mode and frequency of application

OBJECTIVES

To evaluate the effect of an additional layer of universal adhesive on the interfacial enamel/dentin-composite gap formation in relation to application mode and aging, via spectral domain optical coherence tomography (SD-OCT) and scanning electron microscopy (SEM).

METHODS

In vitro class V cavities in 114 caries-free premolars were restored by applying one or two layers of a universal adhesive (Scotchbond Universal, SBU) in self-etch (se) and etch-and-rinse (er) mode or the reference adhesive OptiBond FL (OFL-er). The restorations were imaged by SD-OCT (six groups, n = 8) and SEM (n = 3) directly after filling (t1), water storage (t2, 24 h), embedding (t3), and thermo-mechanical loading (t4, TCML). The interfacial gaps were quantified using 26 parameters and analyzed using principal component analysis and linear mixed effect models.

RESULTS

Gap formation at enamel and dentin was significantly influenced by the adhesive, the application mode and number of layers (p < 0.001). This was due to the influence of the SBU-er mode (p < 1e-05), which showed significantly more gap formation and a greater range of variation with double application when compared to SBU-se and OFL. The fewest interfacial gaps occurred with one or two applications of OFL-er and one layer of SBU-er.

SIGNIFICANCE

Adhesive application mode and the number of adhesive layers are relevant factors in the tooth-composite bond failure. Double application worsened the adaptation of SBU to freshly prepared dentin conditioned with phosphoric acid.

Dental findings in wild great apes from macerated skull analysis

Oral health is a crucial aspect of overall well-being in both humans and nonhuman primates. Understanding the oral pathologies and dental conditions in apes can provide valuable insights into their evolutionary history, dietary habits, and overall health. The present study evaluates dental findings in wild great apes from museum specimens to gain insights into the influence of natural nutrition on dental health. Complete macerated skulls of wild, adult great apes from the collection of the Museum of Natural History, Berlin, Germany, were examined. We analyzed skulls of 53 gorillas (Gorilla gorilla), 63 chimpanzees (Pan troglodytes), and 41 orangutans (Pongo spp.). For each skull, we recorded wear of dental hard tissues (Lussi and Ganss index), carious lesions, and periodontal bone loss. Incisal and occlusal dental hard tissue defects were found in all skulls, as well as considerable external staining. In all species, incisors and canines showed the greatest loss of tissue, followed by molars. The wear of molars decreased from the first to the third molars, premolars showed the least pronounced defects. Some individuals had apical osteolytic defects along with severe dental hard tissue loss with pulp involvement or after dental trauma, respectively (n = 5). Our study did not observe any carious lesions among the examined great ape skulls. However, we did find evidence for localized or generalized periodontal bone loss in a subset of the specimens (n = 3 chimpanzees, n = 7 orangutans). The natural diet and foraging behavior of great apes induces abrasion and attrition of dental hard tissue but does not yield carious lesions. The occurrence of periodontitis in individual apes indicates that the natural circumstances can induce periodontal bone loss even in the wild, despite physiological nutrition.

Erosion behaviour of human, bovine and equine dental hard tissues

Dental hard tissues from different species are used in dental research, but little is known about their comparability. The aim of this study was to compare the erosive behaviour of dental hard tissues (enamel, dentin) obtained from human, bovine and equine teeth. In addition, the protective effect of the pellicle on each hard tissue under erosive conditions was determined. In situ pellicle formation was performed for 30 min on enamel and dentin samples from all species in four subjects. Calcium and phosphate release was assessed during 120 s of HCl incubation on both native and pellicle-covered enamel and dentin samples. SEM and TEM were used to examine surface changes in native enamel and dentin samples after acid incubation and the ultrastructure of the pellicle before and after erosive exposure. In general, bovine enamel and dentin showed the highest degree of erosion after acid exposure compared to human and equine samples. Erosion of human primary enamel tended to be higher than that of permanent teeth, whereas dentin showed the opposite behaviour. SEM showed that eroded equine dentin appeared more irregular than human or bovine dentin. TEM studies showed that primary enamel appeared to be most susceptible to erosion.

Sensors for in situ monitoring of oral and dental health parameters in saliva

OBJECTIVES

The oral cavity is an easily accessible unique environment and open system which is influenced by the oral fluids, microbiota, and nutrition. Little is known about the kinetics and dynamics of metabolic processes at the intraoral surfaces. Real-time monitoring of salivary biomarkers, e.g., glucose, lactate, fluoride, calcium, phosphate, and pH with intraoral sensors is therefore of major interest. The aim of this review is to overview the existing literature for intraoral saliva sensors.

MATERIALS AND METHODS

A comprehensive literature search was performed to review the most relevant studies on intraoral saliva sensor technology.

RESULTS

There is limited literature about the in situ saliva monitoring of salivary biomarkers. Bioadhesion and biofouling processes at the intraoral surfaces limit the performances of the sensors. Real-time, long-term, and continuous intraoral measurement of salivary metabolites remains challenging and needs further investigation as only few well-functioning sensors have been developed until today. Until now, there is no sensor that measures reliably beyond hours for any analyte other than glucose.

CONCLUSIONS

Saliva's complex and dynamic structure as well as bioadhesion are key challenges and should be addressed in the future developments. Consequently, more studies that focus particularly on biofouling processes and interferential effects of the salivary matrix components on sensor surfaces are required.

CLINICAL RELEVANCE

By monitoring fluids in the oral cavity, as the entrance to the digestive system, extensive information can be obtained regarding the effects of foods and preventive agents on the oral microbiota and the tooth surfaces. This may lead to a better understanding of strategies to modulate oral and general health.

Influence of Consumption of Nitrate-rich Beetroot Juice on Lactate Production in Saliva and Oral Biofilm - A Clinical Trial

PURPOSE

Diets rich in nitrates have the potential to prevent oral diseases such as caries or periodontitis. The reduced forms nitrite and nitric oxide have an antibacterial effect against cariogenic bacteria. The effect on bacterial acid production in saliva and oral biofilm is yet unknown. This study investigated the influence of consuming naturally nitrate-rich beetroot juice on bacterial lactate production in saliva and on the pH value of saliva and oral biofilm.

MATERIALS AND METHODS

In addition to their usual diet, a study group of eight subjects consumed 50 ml of beetroot juice daily for a fortnight. After a two-week break, they rinsed with 0.2% chlorhexidine (CHX) for 14 days as a positive control. Bacterial lactate production was induced by rinsing with 50 ml apple juice and measured at different time points during the study.

RESULTS

After two weeks of daily beetroot-juice consumption, an accumulation of nitrate and nitrite was measured in the saliva. No influence on the bacterial lactate production in saliva or the saliva and plaque pH was found.

CONCLUSION

Commercially available beetroot juice showed no modulating effects on intraoral bacterial acid production, suggesting no caries-preventive properties under the tested conditions.

Prevention of Dental Biofilm Formation with Polyphenols: A Systematic Review

Polyphenols are plant secondary products with health-promoting properties against various degenerative or infectious diseases, and thus may help in the prevention of oral diseases. The aim of the present systematic review was to investigate polyphenols as a possible adjuvant in inhibiting dental biofilm formation, which is an important precondition for the most prevalent oral disease - caries and periodontitis. A literature search was conducted using the databases PubMed, CENTRAL and Scopus. Only studies with oral healthy participants and plaque level as outcome were included. Data search and extraction was conducted by two authors independently. Of the 211 initially identified studies, only six met all inclusion criteria. Meta-analysis was performed with five studies using the random effect model. Treatment with polyphenols reduced the plaque level in comparison to a negative control, but not significantly. Strong evidence of heterogeneity was observed. The diversity and complexity of polyphenols and their preparation need to be considered. There is no clear evidence that clinical use of polyphenols can prevent dental biofilm formation. Additional research with more and larger randomized controlled trials are required.

Software-supported periodontal diagnostics with three-dimensional cone-beam computed tomography compared to conventional two-dimensional panoramic imaging and clinical diagnostics (a prospective study)

AIM

Aim of this study comprised the software-supported evaluation of measurement accuracy between cone-beam computed tomography (CBCT) and panoramic radiographs in the assessment of the periodontal bone level in patients with periodontitis and comparison with clinical periodontal parameters.

MATERIAL AND METHODS

Twenty patients with severe periodontitis (stage III-IV) were evaluated clinically and radiographically (panoramic and CBCT). Diagnostic interpretation comprised three blinded investigators with different levels of experience. Specific software-basing measurement procedure evaluated radiological distances for the mesial, central, and distal bone levels on the oral and vestibular sides of the teeth investigated and furcation upper and lower boundary. Jaw localization, anatomical region-of-interest, the number of roots and experience of the observers were evaluated. All measurements were carried out twice by the same observers within a 6-week interval.

RESULTS

Slightly higher measurement deviations (SD) in the range of 0.47 (0.40) mm were found for CBCT evaluation compared to panoramic imaging. Pearson correlation analysis showed statistically strong positive correlation for the mesial and distal aspects, moderate positive correlation was found for the investigated furcations between both radiographic modalities. Compared to the clinical reference, the mean total error of measurement (SD) was larger for panoramic imaging (0.66 (0.48) mm) than CBCT (0.27 (0.08) mm) for all three observers.

CONCLUSIONS

Software-supported CBCT analysis delivers better diagnostic information about the bony periodontal conditions of the patient compared to two-dimensional radiographs. However, it remains unclear if these additional information lead to better periodontal outcomes.

Determination of a Representative and 3D-Printable Root Canal Geometry for Endodontic Investigations and Pre-Clinical Endodontic Training-An Ex Vivo Study

Models of artificial root canals are used in several fields of endodontic investigations and pre-clinical endodontic training. They allow the physical testing of dental treatments, the operating of instruments used and the interaction between these instruments and the tissues. Currently, a large number of different artificial root canal models exist whose geometry is created either on the basis of selected natural root canal systems or to represent individual geometrical properties. Currently, only a few geometric properties such as the root canal curvature or the endodontic working width are taken into consideration when generating these models. To improve the representational capability of the artificial root canal models, the aim of the current study is therefore to generate an artificial root canal based on the statistical evaluation of selected natural root canals. Here, the approach introduced by Kucher for determining the geometry of a root canal model is used, which is based on the measurement and statistical evaluation of the root canal center line's curvatures and their cross-sectional dimensions. Using the example of unbranched distal root canals of mandibular molars (n = 29), an artificial root canal model representing the mean length, curvature, torsion and cross-sectional dimensions of these teeth could be derived.

Olive Oil as a Transport Medium for Bioactive Molecules of Plants?-An In Situ Study

(1) Caries and erosions still remain a challenge for preventive dentistry. Certain plant extracts have shown beneficial effects in preventive dentistry. The aim of this study was to evaluate the antibacterial, anti-adherent and erosion-protective properties of ellagic acid (EA) as a polyphenolic agent. The combination with olive oil was investigated additionally to verify a possible improved bioactive effect of EA. (2) An in situ study was carried out with six subjects. Individual splints were prepared with bovine enamel specimens. The splints were worn for 1 min (pellicle formation time). Thereafter, 10 min rinses were performed with EA in water/in oil. Bacterial adherence was evaluated by fluorescence microscopy (DAPI, ConA, BacLight) after an 8 h oral exposition time. Additionally, the splints were worn for 30 min to quantify demineralization processes. The ultrastructure of the pellicle was investigated after an oral exposure time of 2 h under a transmission electron microscope. Statistical analysis was performed by Kruskal-Wallis tests, Mann-Whitney U tests and Bonferroni-Holm correction. (3) Rinsing with EA led to a significant reduction of adherent vital and dead bacteria. The combination with olive oil did not improve these outcomes. The assessment of glucan structures after rinsing with EA in water showed significant effects. Significant differences were observed for both rinses in calcium release at pH 3.0. After rinsing with EA in oil, significantly less calcium was released compared to rinsing with EA in water (pH = 3.0). (4) Olive oil is not suitable as a transport medium for lipophilic polyphenols. EA has anti-adherent and antibacterial properties in situ. EA also shows erosion-protective effects, which can be enhanced in combination with olive oil depending on the pH value. Ellagic acid has a neutral pH and could be an opportunity in the treatment of specific patient groups (xerostomia or mucositis).

Efficacy of Endodontic Disinfection Protocols in an E. faecalis Biofilm Model-Using DAPI Staining and SEM

The aim of this study was to investigate the antimicrobial efficacy of different disinfection protocols in a novel Enterococcus faecalis biofilm model based on a visualization method and to evaluate the potential alteration of dentinal surface. A total of 120 extracted human premolars were allocated to 6 groups with different irrigation protocols. The assessment of the effectiveness of each protocol and the alteration of dentinal surface were visualized by using SEM and fluorescence microscopy (DAPI). A dense E. faecalis biofilm with a penetration depth of 289 μm (medial part of the root canal) and 93 μm (apical part) validated that the biofilm model had been successfully implemented. A significant difference between the 3% NaOCl groups and all the other groups in both observed parts of the root canal (p < 0.05) was detected. However, the SEM analysis revealed that the dentinal surface in the 3% NaOCl groups was severely altered. The established biofilm model and the visualization method based on DAPI are appropriate for bacterial quantification and evaluation of the depth effect of different disinfection protocols in the root canal system. The combination of 3% NaOCl with 20% EDTA or MTAD with PUI allows the decontamination of deeper dentine zones within the root canal but simultaneously alters the dentinal surface.

The abundance of lysozyme, lactoferrin and cystatin S in the enamel pellicle of children - Potential biomarkers for caries?

OBJECTIVE

In this study, the abundance of the protective salivary proteins lysozyme, lactoferrin, and cystatin S was quantified in the in situ formed pellicle of caries-free and caries-active children to determine whether they may be possible biomarkers for caries.

DESIGN

Pellicle formation was performed in situ for 10 min on ceramic specimens from the oral cavity of children (5-8 years) with caries (n = 17) and without evidence of caries (n = 17). Additionally, unstimulated saliva was collected. Levels of lysozyme, lactoferrin, and cystatin S were measured in desorbed pellicle eluates and saliva using ELISA.

RESULTS

No statistically significant differences were found in the occurrence of cystatin S and lysozyme in saliva and pellicle between caries-active and caries-free children. However, significantly higher amounts of lactoferrin were detected in the pellicle of caries-active children.

CONCLUSION

The protective salivary protein lactoferrin may be a biomarker for caries susceptibility in children.

Direct and indirect effects of different dentifrices on the initial bacterial colonization of enamel in situ overnight

OBJECTIVE

The aim of this study was to investigate the direct and indirect influence of fluoridated toothpastes and fluoride-free toothpaste with hydroxyapatite (HAP) as active ingredient on initial bacterial colonization on enamel in situ.

METHODS

For this clinical-experimental pilot study, eight subjects were instructed to brush their teeth with three different toothpastes (Elmex^® : 1400 ppm AmF, Meridol^® : 1400 ppm AmF +SnF2, Karex^® : HAP), using each for two consecutive days. As a control, brushing without toothpaste was performed. To evaluate bacterial colonization, subject wore splints with buccally placed bovine enamel platelets overnight. Two modes were tested. In a first pass (regimen A), the splints were inserted after toothbrushing to examine the indirect effects of the dentifrices. In order to investigate the direct effects, the specimens were brushed in situ in a second pass (regimen B). Biofilm formation was visualized and quantified using fluorescence microscopy (DAPI and BacLight) and transmission electron microscopy (TEM).

RESULTS

For brushing regimen A (indirect effect of dentifrices), no statistical differences were detected between any of the tested dentifrices or the control. Likewise, no statistically significant differences were recorded for brushing regimen B (direct effect of dentifrices). Furthermore, no differences between the different brushing techniques were determined with regard to the ultrastructure of the overnight biofilm.

CONCLUSION

Within the limitations of the present pilot study, it can be concluded that in patients with good oral hygiene, dentifrices and their chemical composition have no statistically significant effect on the initial bacterial colonization of enamel platelets in situ, irrespectively of the mode of application.

Caries Management-The Role of Surface Interactions in De- and Remineralization-Processes

BACKGROUND

Bioadhesion and surface interactions on enamel are of essential relevance for initiation, progression and prevention of caries and erosions. Salivary proteins on and within initial carious and erosive lesions can facilitate or aggravate de- and remineralization. This applies for the pellicle layer, the subsurface pellicle and for proteins within initial carious lesions. Little is known about these proteinaceous structures related to initial caries and erosion. Accordingly, there is a considerable demand for an understanding of the underlying processes occurring at the interface between the tooth surface and the oral cavity in order to develop novel agents that limit and modulate caries and erosion. Objectives and findings: The present paper depicts the current knowledge of the processes occurring at the interface of the tooth surface and the oral fluids. Proteinaceous layers on dental hard tissues can prevent or aggravate demineralization processes, whereas proteins within initial erosive or carious lesions might hinder remineralization considerably and restrict the entry of ions into lesions.

CONCLUSIONS

Despite the fact that organic-inorganic surface interactions are of essential relevance for de- and remineralization processes at the tooth surface, there is limited knowledge on these clinically relevant phenomena. Accordingly, intensive research is necessary to develop new approaches in preventive dentistry.

Quantification of Bacterial DNA from Infected Human Root Canals Using qPCR and DAPI after Disinfection with Established and Novel Irrigation Protocols

The removal of bacterial infections within the root canal system is still a challenge. Therefore, the cleansing effect of established and new irrigation-protocols (IP) containing silver diamine fluoride (SDF) 3.8% on the whole root canal system was analyzed using quantitative PCR (qPCR) and 4′,6-diamidino-phenylindole-(DAPI)-staining. Extracted human premolars were instrumented up to F2 (ProTaper Gold) under NaCl 0.9% irrigation and incubated with Enterococcus faecalis for 42 days. Subsequently, different ultrasonically agitated IP were applied to the roots: control (no irrigation), 1. NaOCl 3%, EDTA 20%, CHX 2%, 2. NaOCl 3%, EDTA 20%, 3. NaOCl 3%, EDTA 20%, SDF 3.8%, 4. SDF 3.8%, and 5. NaCl 0.9%. One half of the root was investigated fluorescent-microscopically with DAPI. The other half was grinded in a cryogenic mill and the bacterial DNA was quantified with qPCR. The qPCR results showed a statistically significant reduction of bacteria after the application of IP 1, 2, and 3 compared to the control group. While IP 4 lead to a bacterial reduction which was not significant, IP 5 showed no reduction. These data corresponded with DAPI staining. With qPCR a new molecular-biological method for the investigation of the complete root canal system was implemented. The novel IP 3 had an equally good cleansing effect as the already established IP.

Bioadhesion on Textured Interfaces in the Human Oral Cavity-An In Situ Study

Extensive biofilm formation on materials used in restorative dentistry is a common reason for their failure and the development of oral diseases like peri-implantitis or secondary caries. Therefore, novel materials and strategies that result in reduced biofouling capacities are urgently sought. Previous research suggests that surface structures in the range of bacterial cell sizes seem to be a promising approach to modulate bacterial adhesion and biofilm formation. Here we investigated bioadhesion within the oral cavity on a low surface energy material (perfluorpolyether) with different texture types (line-, hole-, pillar-like), feature sizes in a range from 0.7–4.5 µm and graded distances (0.7–130.5 µm). As a model system, the materials were fixed on splints and exposed to the oral cavity. We analyzed the enzymatic activity of amylase and lysozyme, pellicle formation, and bacterial colonization after 8 h intraoral exposure. In opposite to in vitro experiments, these in situ experiments revealed no clear signs of altered bacterial surface colonization regarding structure dimensions and texture types compared to unstructured substrates or natural enamel. In part, there seemed to be a decreasing trend of adherent cells with increasing periodicities and structure sizes, but this pattern was weak and irregular. Pellicle formation took place on all substrates in an unaltered manner. However, pellicle formation was most pronounced within recessed areas thereby partially masking the three-dimensional character of the surfaces. As the natural pellicle layer is obviously the most dominant prerequisite for bacterial adhesion, colonization in the oral environment cannot be easily controlled by structural means.

Mucins 5b and 7 and secretory IgA in the oral acquired pellicle of children with caries and caries-free children

OBJECTIVE

The objective of this study was to determine whether differences in the abundance of mucins 5b and 7 as well as secretory IgA exist in the oral acquired pellicle between children with active caries and caries-free children.

DESIGN

Pellicle formation was performed for 10 min in-situ on ceramic slabs in the oral cavity of children (5-7 years of age) with caries (n = 15) and without signs of caries (n = 13). Furthermore, unstimulated saliva was collected. Concentrations of Muc5b, Muc7 and sIgA were measured in desorbed pellicle eluates and in saliva.

RESULTS

Significantly larger concentrations of Muc5b, Muc7 and sIgA were detected in the pellicle obtained from children with caries compared to caries-free children. However, in the salivary samples concentrations of mucins Muc5b and Muc7 as well as sIgA did not differ significantly between the two groups.

CONCLUSIONS

All three pellicle components Muc5b, Muc7 as well as sIgA could be identified as potential biomarkers for early childhood caries with high sensitivity and specificity. This could contribute to a better understanding of the different caries susceptibility in children.

An Automated Measurement Method for the Endodontic Working Width of Lower Molars by Means of Parametric Models Using Cone-beam Computed Tomographcy and Micro-Computed Tomography

INTRODUCTION

A new method for the approximation of the root canal's cross-sectional shape and its working width using cone-beam computed tomographic (CBCT) or micro-computed tomographic (micro-CT) imaging was introduced.

METHODS

Scanned data from 29 extracted human mandibular first and second molar distal root canals without instrumentation were reconstructed and analyzed with a self-developed measurement algorithm. The 3-dimensional volume models were sliced perpendicular to the vertical axis. Using different 2-dimensional parametric models, the contour of each root canal slice was approximated and used to determine the canal's cross-sectional dimensions. The measurements of minor width, major width, and the root canal's conicity were statistically analyzed using analysis of variance.

RESULTS

The measured minor and major widths of the investigated root canals were significantly higher (probability value P < .05) when evaluated by CBCT images than the results obtained from micro-CT data. Both dimensions increased starting from the apical foramen (P < .01). The narrowest measured canal widths were 0.19-0.24 mm for CBCT imaging and 0.09-0.21 mm for micro-CT imaging in the apical part. The maximum values for conicity were between 13% and 17% in the cervical third.

CONCLUSIONS

The 3-dimensional imaging data from CBCT and micro-CT imaging enabled a valuable anatomic assessment of the root canal's cross-sectional working width along the canal up to the physiological foramen in order to determine an adequate apical diameter as well as the correct measured taper in the cervical and medial part.

Preventive Applications of Polyphenols in Dentistry-A Review

Polyphenols are natural substances that have been shown to provide various health benefits. Antioxidant, anti-inflammatory, and anti-carcinogenic effects have been described. At the same time, they inhibit the actions of bacteria, viruses, and fungi. Thus, studies have also examined their effects within the oral cavity. This review provides an overview on the different polyphenols, and their structure and interactions with the tooth surface and the pellicle. In particular, the effects of various tea polyphenols on bioadhesion and erosion have been reviewed. The current research confirms that polyphenols can reduce the growth of cariogenic bacteria. Furthermore, they can decrease the adherence of bacteria to the tooth surface and improve the erosion-protective properties of the acquired enamel pellicle. Tea polyphenols, especially, have the potential to contribute to an oral health-related diet. However, in vitro studies have mainly been conducted. In situ studies and clinical studies need to be extended and supplemented in order to significantly contribute to additive prevention measures in caries prophylaxis.

Mapping of the Micro-Mechanical Properties of Human Root Dentin by Means of Microindentation

The extensive knowledge of root dentin's mechanical properties is necessary for the prediction of microstructural alterations and the teeth's deformations as well as their fracture behavior. Standardized microindentation tests were applied to apical, medial, and cervical root sections of a mandibular human first molar to determine the spatial distribution of the hard tissue's properties (indentation modulus, indentation hardness, Martens hardness, indentation creep). Using an indentation mapping approach, the inhomogeneity of mechanical properties in longitudinal as well as in transversal directions were measured. As a result, the tooth showed strongly inhomogeneous material properties, which depended on the longitudinal and transversal positions. In the transversal cutting planes of the cervical, medial, apical sections, the properties showed a comparable distribution. A statistical evaluation revealed an indentation modulus between 12.2 GPa and 17.8 GPa, indentation hardness between 0.4 GPa and 0.64 GPa and an indentation creep between 8.6% and 10.7%. The established standardized method is a starting point for further investigations concerning the intensive description of the inhomogeneous mechanical properties of human dentin and other types of dentin.

Quantification of Bacterial Colonization in Dental Hard Tissues Using Optimized Molecular Biological Methods

Bacterial infections of root canals and the surrounding dental hard tissue are still a challenge due to biofilm formation as well as the complex root canal anatomy. However, current methods for analyzing biofilm formation, bacterial colonization of root canals and dental hard tissue [e.g., scanning electron microscopy, confocal laser scanning microscopy (CLSM) or determination of colony forming units (CFU)] are time-consuming and only offer a selective qualitative or semi-quantitative analysis. The aim of the present study is the establishment of optimized molecular biological methods for DNA-isolation and quantification of bacterial colonization via quantitative PCR (qPCR) from dental hard tissue. Root canals of human premolars were colonized with Enterococcus faecalis. For isolation of DNA, teeth were then grinded with a cryo mill. Since the hard tissues dentin and especially enamel belong to the hardest materials in the human organism, the isolation of bacterial DNA from root dentin is very challenging. Therefore, treatment steps for the isolation of DNA from grinded teeth were systematically analyzed to allow improved recovery of bacterial DNA from dental hard tissues. Starting with the disintegration of the peptidoglycan-layer of bacterial cells, different lysozyme solutions were tested for efficacy. Furthermore, incubation times and concentrations of chelating agents such as EDTA were optimized. These solutions are crucial for the disintegration of teeth and hence improve the accessibility of bacterial DNA. The final step was the determination of prior bacterial colonization of each root canal as determined by qPCR and comparing the results to alternative methods such as CFU. As a result of this study, optimized procedures for bacterial DNA-isolation from teeth were established, which result in an increased recovery rate of bacterial DNA. This method allows a non-selective and straightforward procedure to quantify bacterial colonization from dental hard tissue. It can be easily adapted for other study types such as microbiome studies and for comparable tissues like bones.

Bioadhesion in the oral cavity and approaches for biofilm management by surface modifications

BACKGROUND

All soft and solid surface structures in the oral cavity are covered by the acquired pellicle followed by bacterial colonization. This applies for natural structures as well as for restorative or prosthetic materials; the adherent bacterial biofilm is associated among others with the development of caries, periodontal diseases, peri-implantitis, or denture-associated stomatitis. Accordingly, there is a considerable demand for novel materials and coatings that limit and modulate bacterial attachment and/or propagation of microorganisms.

OBJECTIVES AND FINDINGS

The present paper depicts the current knowledge on the impact of different physicochemical surface characteristics on bioadsorption in the oral cavity. Furthermore, it was carved out which strategies were developed in dental research and general surface science to inhibit bacterial colonization and to delay biofilm formation by low-fouling or "easy-to-clean" surfaces. These include the modulation of physicochemical properties such as periodic topographies, roughness, surface free energy, or hardness. In recent years, a large emphasis was laid on micro- and nanostructured surfaces and on liquid repellent superhydrophic as well as superhydrophilic interfaces. Materials incorporating mobile or bound nanoparticles promoting bacteriostatic or bacteriotoxic properties were also used. Recently, chemically textured interfaces gained increasing interest and could represent promising solutions for innovative antibioadhesion interfaces. Due to the unique conditions in the oral cavity, mainly in vivo or in situ studies were considered in the review.

CONCLUSION

Despite many promising approaches for modulation of biofilm formation in the oral cavity, the ubiquitous phenomenon of bioadsorption and adhesion pellicle formation in the challenging oral milieu masks surface properties and therewith hampers low-fouling strategies.

CLINICAL RELEVANCE

Improved dental materials and surface coatings with easy-to-clean properties have the potential to improve oral health, but extensive and systematic research is required in this field to develop biocompatible and effective substances.

Results of a randomized controlled phase III trial: efficacy of polyphenol-containing cystus® tea mouthwash solution for the reduction of mucositis in head and neck cancer patients undergoing external beam radiotherapy

PURPOSE

To determine the effect of Cystus® tea (Naturprodukte Dr. Pandalis GmbH & Co. KG) as mouthwash compared to sage tea on oral mucositis in patients undergoing radio(chemo)therapy for head and neck cancer.

METHODS

In this randomized, prospective phase III study, 60 head and neck cancer patients with primary or postoperative radio(chemo)therapy were included between 04/2012 and 06/2014. They received either sage or Cystus® tea for daily mouthwash under therapy. Mucositis was scored twice a week following the Radiation Therapy Oncology Group and the European Organization for Research and Treatment Cancer (RTOG/EORTC) scoring system. Dental parameters were also recorded. Statistical evaluation of the primary endpoint was performed using t‑test and log rank test.

RESULTS

Data from 57 patients could be evaluated. Patient characteristics showed no significant difference between the two groups (n = 27 sage; n = 30 Cystus®). A total of 55 patients received the prescribed dose (60-66 Gy postoperative; 70-76.8 Gy primary). Mucositis grade 3 was observed in 23 patients (n = 11 sage; n = 12 Cystus®) and occurred between day 16 and 50 after start of therapy. There was no significant difference between the two groups in latency (p = 0.75) and frequency (p = 0.85) of the occurrence of mucositis grade 3. The self-assessment of the oral mucosa and the tolerability of the tea also showed no significant differences. Occurrence of dental pathologies appeared to increase over time after radiotherapy.

CONCLUSION

Cystus® and sage tea have a similar effect on the occurrence of radiation-induced mucositis regarding latency and incidence. Cystus® tea mouthwash solution is tolerated well and can be applied in addition to intensive oral care and hygiene along with the application of fluorides.

Towards quantitative demineralization imaging for the assessment of carious lesions based on PS-OCT

Assessing the stage and progression of enamel demineralization non-invasively is of high interest in conservative dentistry. By examining tooth samples with suspected occlusal lesions, we show the potential of depolarization imaging based on polarization-sensitive optical coherence tomography for the assessment of carious lesions and validate the results by co-registered X-ray micro-computed tomography volumes.

Effect of fragaria vesca, hamamelis and tormentil on the initial bacterial colonization in situ

OBJECTIVE

The presentin situ study aims to examine the influence of the polyphenolic tea drugs fragaria vesca, hamamelis and tormentil on the initial oral bioadhesion.

DESIGN

Initial biofilm formation was performed on bovine enamel slabs which were carried intraorally by 12 subjects. After 1 min of intraoral pellicle formation, the subjects rinsed with fragaria vesca, tormentil (0.8 mg/8 mL) and hamamelis (0.2 mg/8 mL) for 10 min. Tap water served as negative control, 0.2 % CHX as positive control. The investigations took place on different days (wash-out: 2 days). Afterwards, fluorescence microscopy has been performed per test solution (n = 5) and per subject (n = 12) to visualize bacterial adhesion and glucan formation (8 h oral exposition) with DAPI, ConA and BacLight. Additionally, TEM was used to visualize the pellicle ultrastructure and expectorate samples. Statistical evaluation was carried out using the Kruskal-Wallis- (p < 0.5), Mann-Whitney U test (p < 0.5) and Bonferroni-Holm-correction (p < 0.1).

RESULTS

Rinsing with the polyphenolic tea extracts reduced significantly initial bacterial colonization (DAPI) compared to the negative control. There was no significant difference betweenfragaria vesca, hamamelis and tormentil. All solutions showed a reducing effect on the glucan formation. No significant difference was observed between fragaria vesca and CHX. Considerable alterations of the pellicle's ultrastructure manifested by an increase in thickness and electron density resulted from rinsing with the three polyphenolic aqueous extracts.

CONCLUSIONS

Fragaria vesca, hamamelis and tormentil significantly reduce initial bioadhesion and glucan formation in situ and are therefore recommended as adjuvant antibacterial oral therapeutics.

Targeted metabolomics of pellicle and saliva in children with different caries activity

Pellicle is the initial proteinaceous layer that is formed almost instantaneously on all solid surfaces in the oral cavity. It is of essential relevance for any interactions and metabolism on the tooth surface. Up to now, there is no information on the metabolome of this structure. Accordingly, the present study aims to characterise the metabolomic profile of in-situ pellicle in children with different caries activity for the first time in comparison to saliva. Small molecules such as carbohydrates, amino acids, organic acids, and fatty acids, putatively involved in the formation of caries were quantified using mass spectrometry (MS)-based techniques, such as (stable isotope dilution analysis)-ultra-performance liquid chromatography-tandem MS and gas chromatography/electron ionisation-MS. Pellicle and corresponding saliva samples were collected from caries-active, caries-free and caries-rehabilitated 4- to 6-year-old children. The most abundant analytes in pellicle were acetic acid (1.2-10.5 nmol/cm2), propionic acid (0.1-8.5 nmol/cm2), glycine (0.7-3.5 nmol/cm2), serine (0.08-2.3 nmol/cm2), galactose (galactose + mannose; 0.035-0.078 nmol/cm2), lactose (0.002-0.086 nmol/cm2), glucose (0.018-0.953 nmol/cm2), palmitic acid (0.26-2.03 nmol/cm2), and stearic acid (0.34-1.81 nmol/cm2). Significant differences depending on caries activity were detected neither in saliva nor in the corresponding pellicle samples.

Caries and periodontitis associated bacteria are more abundant in human saliva compared to other great apes

OBJECTIVE

Caries and periodontitis are uncommon in free ranging great apes but a major oral disease in humans. The aim was to analyze abundance and diversity of oral bacteria of western humans and their closest relatives, to examine if zoo apes feeding on diet other than in their natural habitat show caries and periodontitis associated salivary bacteria and comparable susceptibility for oral civilization diseases as humans.

DESIGN

Bacterial composition of human and great ape saliva samples were compared by analyzing the V3 region of the bacteria 16S rRNA gene by Next Generation Sequencing with Ion Torrent.

RESULTS

Results show species-specific differences in the salivary bacteria phyla and genera composition among all apes. Moreover, salivary bacterial composition within non-human apes showed higher intra-individual differences than within humans. Human saliva exhibited lowest bacteria diversity. Different behavioral patterns including (oral) hygiene standards of humans and non-human apes might cause differences. All species differed in diversity and abundance of caries associated bacteria genera. Human saliva revealed higher abundance of caries and periodontitis relevant bacteria in contrast to other great apes, which might be supported by higher consume of refined cariogenic food items, possibly raising their risk for oral disease susceptibility.

CONCLUSIONS

The study offers first clues on caries and periodontitis relevant bacteria of captive great ape species in comparison to humans. Higher susceptibility to oral diseases for humans than for their closest relatives, leads to the question, if the oral microbiome changed during evolution and how it is influenced by the human life style.

Influence of pure fluorides and stannous ions on the initial bacterial colonization in situ

The present clinical-experimental study aims to examine the effect of pure experimental fluoride solutions and stannous chloride on the initial oral bioadhesion under in situ conditions. After 1 min of pellicle formation on bovine enamel slabs, 12 subjects rinsed with 8 ml of the fluoride test solutions (NaF, Na2PO3F, AmF, SnF2,) with 500 ppm fluoride concentration each for 1 min. Additionally, rinsing without a solution (control) and rinsing with 1563 ppm SnCl2 solution took place for 1 min. Afterwards, fluorescence microscopy took place to visualize bacterial adhesion and glucan formation (8 h oral exposition) with DAPI and ConA and the BacLight method. TEM was performed to visualize the pellicle ultrastructure together with EDX to detect stannous ions. The rinsing solutions with pure SnF2 and SnCl2 reduced significantly the initial bacterial colonization (DAPI). While, NaF and Na2PO3F showed no significant effect compared to the control. There was no significant difference between AmF, SnF2 and SnCl2. All tested experimental solutions showed no reducing effect on the glucan formation. Considerable alterations of the pellicle ultrastructure resulted from rinsing with the Sn-containing solutions. SnF2 appears to be the most effective type of fluoride to reduce initial bacterial colonization in situ. The observed effects primarily have to be attributed to the stannous ions' content.

The association between socioeconomic status, psychopathological symptom burden in mothers, and early childhood caries of their children

Objectives

Various maternal mental disorders and socioeconomic status [SES] are discussed as risk factors for early childhood caries [ECC]. In our study, we examined a wide range of symptoms of mental disorders with the aim to identify those maternal psychopathological symptom burdens [PSBs] which show relevant associations with ECC. Our second objective was to investigate how SES affects the associations between PSB and ECC.

Methods

In this study, sixty children with ECC (caries group [CG]) and sixty caries-free children [NON-CG] with their mothers were recruited at two sites in Germany. Children aged three or four years were included in the study. Children’s dental status [dmf-t] and plaque index were recorded, and mothers answered a multidimensional SES index (including education, profession and income) as well as screening questionnaires capturing dental anxiety, depressive disorders, generalized anxiety, somatic symptom burden, eating disorders, traumatic childhood experiences, nicotine dependency and alcohol dependency.

Results

Mothers of the CG reported significantly higher dental anxiety (d_Cohen = 0.66), childhood trauma (d_Cohen = 0.53) and nicotine dependency (d_Cohen = 0.64) than the NON-CG. However, mediator analyses showed that these effects were partly mediated by the SES. Mothers of the CG had a significantly lower SES (d_Cohen = 0.93); with education as strongest predictor of dental status. The groups did not differ significantly in symptoms of depressiveness, subjective somatic symptom burden, alcohol dependency, eating disorders, and generalized anxiety.

Conclusions

Several PSBs are associated with ECC, however the SES as the strongest influencing factor mediates this association. Difficult socioeconomic conditions might predispose for both, ECC and mental illness. Targeted strategies are needed to facilitate the use of preventive measures and dental health services especially in families of lower status. For this purpose, psychosocial risk constellations must be identified. More integrative, multifactorial oriented research is necessary to gain a bio-psycho-social understanding of ECC.

Characterization of the in situ pellicle ultrastructure formed under the influence of bovine milk and milk protein isolates

OBJECTIVES

The present study aimed to investigate if bovine milk or milk protein isolates, respectively, alter the ultrastructure of thein situ pellicle and might therefore have an influence on oral health.

METHODS

In situ pellicle samples were formed on bovine enamel slabs exposed in the oral cavity of three subjects for 6, 30, 60 or 120 min. After 3 min of pellicle formation, mouthrinses were performed for 3 min with (non-)homogenized UHT- or fresh milk (0.3% or 3.8% fat), 30% UHT-treated cream or different types of casein- or milk protein isolates containing preparations. The specimens were removed after the exposure times and transmission electron microscopy (TEM) was performed. Native pellicle samples served as controls.

RESULTS

Topical ultrastructural pellicle modifications were detected after mouthrinses with all types of homogenized UHT- or fresh milk and after the application of a 3% native casein micelles containing experimental solution. Atypical globular protein structures, identified as casein micelles, were temporarily adsorbed onto the pellicle. They were closely associated with lipid droplets. Furthermore, the mouthrinses occasionally affected the morphology of salivary bacteria. However, no notable ultrastructural alterations remained after 120 min of pellicle formation.

CONCLUSION

For the first time, bovine milk- and micellar casein-induced pellicle modifications were revealed by TEM. The adsorption of micellar casein is possibly due to its molecular interactions.

CLINICAL SIGNIFICANCE

Bovine milk or micellar caseins provide some potential for the development of preventive strategies against bacterial biofilm formation or erosive processes at the tooth surface.

Activity and distribution pattern of enzymes in the in-situ pellicle of children

OBJECTIVE

This study investigated, for the first time, pellicle enzymes with respect to their activity, distribution and fluorescence pattern in children with different caries experience.

DESIGN

In-situ pellicles were collected from 41 children (aged 4-6 years) with different caries status; 17 of them were caries-free (dmf = 0), 12 had dental restorations but no current caries (dmf ≥ 2) and 12 had at least two carious lesions (dmf ≥ 2). Bovine enamel samples were fixed on individual upper jaw braces for pellicle formation. After 30 min of intraoral exposure, the pellicle and saliva samples were analysed for the activities of amylase, lysozyme, peroxidase and glucosyltransferase (GTF). The distribution of these enzymes, including GTF-isoforms B, C and D, and the pellicle ultrastructure were examined by gold-immunolabelling and transmission electron microscopy (TEM). Furthermore, interactions between pellicle enzymes and adherent bacteria were visualised using combined fluorescence and immunofluorescence labelling.

RESULTS

There were no significant differences in the pellicle enzyme activities between the study groups. TEM analysis revealed the absence of GTF C and D in the pellicle of caries-active children. Amylase, peroxidase and GTF-isoforms showed a random distribution within the pellicle layer; lysozyme was found in the form of clusters. A similar ultrastructural pattern was observed for all subjects. Fluorescence labelling technique enabled visualisation of all enzymes, except for GTF B.

CONCLUSION

Pellicle enzyme activities and ultrastructure are not associated with children's caries status. Further investigation is needed to assess the influence of individual GTF-isoforms on caries susceptibility in children.

Effect of fluoride mouthrinses and stannous ions on the erosion protective properties of the in situ pellicle

The particular feature of this study is the investigation of effects of pure fluoride- or stannous ions based mouthrinses on the erosion protective properties and the ultrastructure of the in situ pellicle (12 volunteers). Experimental solutions were prepared either from 500 ppm NaF, SMFP, AmF or SnF₂ or 1563 ppm SnCl₂, respectively. After 1 min of in situ pellicle formation on bovine enamel slabs, rinses with one of the preparations were performed for 1 min and intraoral specimens’ exposure was continued for 28 min. Native enamel slabs and rinses with bidestilled water served as controls. After oral exposure, slabs were incubated in HCl (pH 2; 2.3; 3) for 120 s and kinetics of calcium- and phosphate release were measured photometrically; representative samples were analysed by TEM and EDX. All mouthrinses reduced mineral loss compared to the native 30-min pellicle. The effect was pH-dependent and significant at all pH values only for the tin-containing mouthrinses. No significant differences were observed between the SnF₂- and the SnCl₂-containing solutions. TEM/EDX confirmed ultrastructural pellicle modifications. SnF₂ appears to be the most effective type of fluoride to prevent erosive enamel demineralisation. The observed effects primarily have to be attributed to the stannous ions’ content.

Effects of Endodontic Irrigants on Material and Surface Properties of Biocompatible Thermoplastics

Passive irrigation is an efficient method for a successful endodontic treatment. During sonic activation biocompatible polymer tips are used to activate irrigants. Compared to ultrasonic activation with metallic tips, polymer tips have the advantage of a reduced risk of fracture and minimise dentine damage. Hence, two polymers, polyether ether ketones (PEEK) and polyamide (PA6), were identified for the manufacturing of novel irrigation tips. The chemical resistance against the irrigants ethylenediaminetetraacetic acid (EDTA) 20%, chlorhexidine gluconate (CHX) 2% and sodium hypochlorite (NaOCl) 5.25% was analysed. Using microindentation, the change of hardness, elasticity, surface roughness and appearance of the polymers was determined. PA6 had a high absorption of irrigant compared to PEEK. PEEK was resistant to the investigated irrigants and showed no significant alteration of surface and mechanical properties, whereas PA6 slightly increased its hardness, elastic modulus and surface roughness during long-term exposure at 37 °C. However, PA6 tips seem to be a promising disposable product due to the material’s high deformability and low manufacturing costs. Particularly with regard to structural-dynamic properties and high chemical resistance, PEEK can be considered as a material for reusable irrigation tips.

Psychological distress and anxiety compared amongst dental patients- results of a cross-sectional study in 1549 adults

Background

This study aimed to identify anxiety in dental patients visiting a dental clinic using the Dental Anxiety Scale, their level of psychological distress using the Brief Symptom Inventory-18 and therefore identifying a correlation between these groups as well as their gender and age.

Methods

An adult sample of N = 1549 patients (865 females, 779 males) was examined over the course of three years using the Brief Symptom Inventory-18 to evaluate psychological distress and the Dental Anxiety Scale to determine anxiety before dental treatment. Evaluations were conducted according to age and gender.

Results

There was no correlation between different age groups of the sample the Dental Anxiety Scale. Anxiety, depression and GSI were more frequent in patients below the age of 46 than above. Women were more susceptible to signs of Anxiety and Somatization and scored higher on the Dental Anxiety Scale and the Global Severity Index than male patients. There was a significant positive correlation between scores of the BSI-18 categories: Somatization, Anxiety and Depression and the DAS for dental patients.

Conclusions

This study showed that a relationship between dental anxiety and psychological distress exists. It would be an improvement to use a short questionnaire like the Dental Anxiety Scale to evaluate a patient before his first treatment so that more appropriate treatments can be pursued.

Impact of a non-fluoridated microcrystalline hydroxyapatite dentifrice on enamel caries progression in highly caries-susceptible orthodontic patients: A randomized, controlled 6-month trial

Aim

The aim of the present randomized, controlled trial was to compare the impact of the regular use of a fluoride‐free microcrystalline hydroxyapatite (HAP) dentifrice and a 1400 ppm fluoride control dentifrice on caries progression in 150 highly caries‐active orthodontic patients.

Methods

The primary outcome was the occurrence of lesions with International Caries Detection and Assessment System (ICDAS) ≥code 1 on the vestibular surfaces of teeth 15‐25 within 168 days after fixation of orthodontic brackets. Secondary outcomes were lesion development ICDAS ≥code 2, the plaque index, and the gingival index.

Results

In total, 147 patients were included in the intent‐to‐treat (ITT) analysis; 133 finished the study per protocol (PP). An increase in enamel caries ICDAS ≥code 1 was observed in 56.8% (ITT) and 54.7% (PP) of the HAP group participants compared with 60.9% (ITT) and 61.6% (PP) of the fluoride control group. Non‐inferiority testing (ITT and PP) demonstrated the absence of a significant difference between the groups. No significant differences in secondary outcomes were observed between the groups.

Conclusion

In highly caries‐active patients, the impact of the regular use of a microcrystalline HAP dentifrice on caries progression is not significantly different from the use of a 1400 ppm fluoride toothpaste (ClinicalTrials.gov: NCT02705456).

Proteomic Analysis of the Initial Oral Pellicle in Caries-Active and Caries-Free Individuals

PURPOSE

To 1) elucidate individual proteomic profiles of the 3-min biofilm of caries-active and caries-free individuals and 2) compare these proteomic profiles against the background of caries.

EXPERIMENTAL DESIGN

The initial oral pellicle of 12 caries-active and 12 caries-free individuals is generated in situ on ceramics specimens. The individual, host-specific proteomic profiles of this basic pellicle layer are analyzed by a chemical elution protocol combined with an elaborate mass spectrometry and evaluated bioinformatically.

RESULTS

A total of 1188 different proteins are identified. Additionally, 68 proteins are present in the profiles of all individuals, suggesting them as ubiquitously occurring base-proteins of the initial human pellicle. Thereof, the single profiles exhibit high inter-individual differences independent of their group affiliation, stating the initial pellicle to represent a rather "individual fingerprint". Quantitative analyses imply slight indication for 23 proteins potentially capable of counting for caries-specific biomarkers.

CONCLUSIONS AND CLINICAL RELEVANCE

The introduced protocol enables the individual analysis of minimal protein amounts and allows for highly precise characterizations and comparisons of individual proteomic profiles. The results contain a considerable higher extent of protein identifications and might serve as a base for future large scale analyzes to identify discrimination factors for the development of caries susceptibility tests.

Comparing oral health in patients with different levels of dental anxiety

Background

Dental Anxiety is still today one of the most common fears and is therefore a great challenge for every dental practitioner. The aim of this study was to identify patients with dental anxiety using the Dental Anxiety Scale and comparing different levels of dental anxiety with oral health using DMF-T and DMF-S index.

Methods

This study questioned 1549 patients over the course of three years (2002–2005). DAS questionnaires were handed out before treatment and the state of oral health was evaluated using DMF-T and DMF-S.

Results

There is no significant relation between high anxiety and the global DMF-T Score (p = 0.237), missing teeth (p = 0.034) and filled teeth (p = 0.237). There is however a significant increase in destroyed teeth, the higher the level of dental anxiety in the patient (p < 0.0001). There is as well a significant relationship between the global DMF-S Score (p = 0.042) and dental anxiety. No relationship was found comparing missing surfaces (p = 0.107) and filled surfaces (p = 0.516) with dental anxiety. Destroyed 16 surfaces are, however, significantly higher in patients with more dental anxiety (p < 0.0001). A higher dental anxiety therefore often causes minimalistic dentistry to fail due to more teeth being destroyed.

Conclusions

Patients with dental anxiety still have a worse oral hygiene than patients without dental anxiety. It is still necessary, in this time of caries prevention rather than over-treatment, to be educated so that patients suffering dental fear receive the right treatment.

Impact of oral astringent stimuli on surface charge and morphology of the protein-rich pellicle at the tooth-saliva interphase

The proteinaceous pellicle layer, which develops upon contact with saliva on the surface of teeth, is important for the formation of oral biofilms and for the protection of teeth from abrasion and chemically induced erosion. Astringent food ingredients comprising polyphenols, cationic macromolecules, and multivalent metal salts are known to interact with the pellicle. However, astringent-induced changes in the physicochemical properties of the tooth-saliva interphase are not yet completely understood. Here we provide comprehensive insights into interfacial charging, ultrastructure, thickness, and surface roughness of the pellicles formed on the model substrates silicon oxide (SiO₂), Teflon^® AF, and hydroxyapatite, as well as on bovine enamel before and after incubation with the astringents epigallocatechin gallate, tannic acid, iron(III) salt, lysozyme, and chitosan. Quartz crystal microbalance with dissipation monitoring demonstrated viscous behavior of untreated pellicles formed in vitro on the different materials. Electrokinetic (streaming current) measurements revealed that cationic astringents reverse the charge of native pellicles, whereas polyphenols did not change the charge under physiological pH condition. In addition, transmission electron microscopy and atomic force microscopy showed a concentration-dependent increase in average film thickness and pellicle surface roughness as induced by astringents. These multifaceted alterations of the salivary pellicle may come along with an increase in roughness perceived on the teeth, which is part of the complex sensations of oral astringency.

Accuracy and Usefulness of CBCT in Periodontology: A Systematic Review of the Literature

A systematic literature review was performed regarding the accuracy and usefulness of cone beam computed tomography (CBCT) in the field of periodontology. A total of 580 articles were identified, of which 13 met the inclusion criteria. Results showed a high accuracy of CBCT in visualizing periodontal structures and the demonstrated the usefulness of CBCT in regenerative periodontal surgery of maxillary molars. It remains questionable whether this gain of additional information actually leads to a better clinical outcome in periodontal treatment. Currently, the use of CBCT in periodontology should be restricted to complex periodontal cases, particularly those involving maxillary molars.

Comparison of initial oral microbiomes of young adults with and without cavitated dentin caries lesions using an in situ biofilm model

Dental caries is caused by acids released from bacterial biofilms. However, the in vivo formation of initial biofilms in relation to caries remains largely unexplored. The aim of this study was to compare the oral microbiome during the initial phase of bacterial colonization for individuals with (CC) and without (NC) cavitated dentin caries lesions. Bovine enamel slabs on acrylic splints were worn by the volunteers (CC: 14, NC: 13) for in situ biofilm formation (2 h, 4 h, 8 h, 1 ml saliva as reference). Sequencing of the V1/V2 regions of the 16S rRNA gene was performed (MiSeq). The relative abundances of individual operational taxonomic units (OTUs) were compared between samples from the CC group and the NC group. Random forests models were furthermore trained to separate the groups. While the overall heterogeneity did not differ substantially between CC and NC individuals, several individual OTUs were found to have significantly different relative abundances. For the 8 h samples, most of the significant OTUs showed higher relative abundances in the CC group, while the majority of significant OTUs in the saliva samples were more abundant in the NC group. Furthermore, using OTU signatures enabled a separation between both groups, with area-under-the-curve (AUC) values of ~0.8. In summary, the results suggest that initial oral biofilms provide the potential to differentiate between CC and NC individuals.

Cross-sectional and en-face depolarization imaging for the assessment of dental lesions

Dental caries is one of the most widespread diseases and the early and non-invasive detection of carious lesions remains an ongoing topic in biomedical research. In contrast, optical coherence tomography (OCT) is an emerging, non-invasive imaging technique for near-surface structures, that has already proved its capability for manifold biomedical applications and can be extended by several modalities such as polarization sensitivity. We have recently shown that polarization sensitive OCT combined with an algorithm for depolarization imaging, visualizing the degree of polarization uniformity (DOPU), is a promising tool for the detection and assessment of carious lesions. In this paper, we evaluate different visualization approaches based on both the intensity and DOPU data with cross-sectional and en-face representations and discuss limitations and the potential of the proposed method for the assessment of dental lesions on the example of a molar tooth with a brown spot.

Visualization of interfacial adhesive defects at dental restorations with spectral domain and polarization sensitive optical coherence tomography

Restoration loss based on interfacial adhesive defects and associated caries at the restoration margin are the main causes for invasive replacement of dental restorations. Assessment of the interfacial quality based on clinical inspection and radiographic examination is often difficult and not reliable. In this work, we present spectral domain optical coherence tomography (SDOCT) and polarization sensitive optical coherence tomography (PSOCT) for the evaluation of tooth-composite bond failure. Imaging of two composite restorations at the occlusal surface are presented using intensity-based images obtained by SDOCT and PSOCT based degree of polarization uniformity (DOPU). Both modalities revealed several defects beneath the surface such as inhomogeneous adhesive layers, marginal gaps and bubbles. In addition, DOPU representation showed an inhomogeneous structure within the composite material. OCT based imaging of dental restorations could add a valuable diagnostic tool for the evaluation of structural defects in clinical practice. The representation of polarization characteristics with the DOPU algorithm provides further information on the homogeneity of the restoration.

Application of optical and spectroscopic technologies for the characterization of carious lesions in vitro

The detection of the beginning demineralization process of dental hard tissue remains a challenging task in dentistry. As an alternative to bitewing radiographs, optical and spectroscopic technologies showed promising results for caries diagnosis. The aim of the present work is to give an overview of optical and spectroscopic properties of healthy and carious human teeth in vitro by means of Raman spectroscopy (RS), optical coherence tomography (OCT) and hyperspectral imaging (HSI). OCT was able to represent microstructural changes below the enamel surface and revealed increased scattering for white spot lesions and a white scattering trail for deeper lesions. HSI showed similar absorbance characteristics for healthy and demineralized enamel over the entire spectrum and a characteristic absorbance peak at 550 nm for discolored lesions. Already at early carious stages (white spot), we found a distinct loss of hydroxylapatite-related intensity at 959 cm−1 in demineralized regions with RS. Healthy and demineralized tooth surfaces can be distinguished at different signal levels by means of RS, OCT and HSI. The presented modalities provide additional information to the current clinical diagnosis of caries such as microstructural changes, quantification of the demineralization and imaging of caries-related chemical changes.

Impact of the springtail's cuticle nanotopography on bioadhesion and biofilm formation in vitro and in the oral cavity

Springtails (Collembola) have a nanostructured cuticle. To evaluate and to understand anti-biofouling properties of springtail cuticles' morphology under different conditions, springtails, shed cuticles and cuticle replicates were studied after incubation with protein solutions and bacterial cultures using common in vitro models. In a second step, they were exposed to human oral environment in situ in order to explore potential application in dentistry. In vitro, the cuticular structures were found to resist wetting by albumin solutions for up to 3 h and colonization by Staphylococcus epidermidis was inhibited. When exposed in the oral cavity, initial pellicle formation was of high heterogeneity: parts of the surface were coated by adsorbed proteins, others remained uncoated but exhibited locally attached, 'bridging', proteinaceous membranes spanning across cavities of the cuticle surface; this unique phenomenon was observed for the first time. Also the degree of bacterial colonization varied considerably. In conclusion, the springtail cuticle partially modulates bioadhesion in the oral cavity in a unique and specific manner, but it has no universal effect. Especially after longer exposure, the nanotextured surface of springtails is masked by the pellicle, resulting in subsequent bacterial colonization, and, thus, cannot effectively avoid bioadhesion in the oral cavity comprehensively. Nevertheless, the observed phenomena offer valuable information and new perspectives for the development of antifouling surfaces applicable in the oral cavity.