Biomaterials / bioinks and extrusion bioprinting

3D Printed Human Amnion-Based Bioactive Hybrid Dressings for Effective Management of Complex Infected Wounds

Chronic wounds are often afflicted with persistent infection, excessive exudate accumulation, and delayed healing, leading to prolonged hospitalization. Excess moisture overhydrates the wound, promotes infection, and causes edema. Peri-wound skin may develop rashes, immersion injuries, and epidermal detachment. Nutrient-rich exudates foster microbial growth, increasing the infection risk. High bacterial loads lead to crust formation, continuous leakage, and foul odor, further complicating healing. To address this challenge, we developed a 3D printed amnion-based hybrid dressing comprising a regenerative layer integrated with a laminated silver-embedded polyurethane foam layer for partial and full thickness (thickness 0.12 mm-4 mm) infected wounds and burns. This dressing can suffice the varied clinical requirements of wound management by augmenting tissue regeneration, reducing bacterial load, and managing wound exudate. Human amnion was processed through decellularization and lyopreservation. Key angiogenic growth factors VEGF-A (54.12 ± 2.31 pg/mg) and PDGF-BB (3.760 ± 0.14 pg/mg) were quantified. Long-term in vitro cell viability was assessed for 20 days (as per ISO 10993-5 standards). Bioink was formulated using cryo-milled amnion particles and excipients optimized through rheology. Hybrid dressing was developed using an extrusion-based 3D printer, layering the amnion bioink onto the physical substrate, followed by lyophilization and gamma sterilization. Preclinical efficacy was assessed using a rodent Staphylococcus aureus-infected wound model, comparing the hybrid dressing to an in-house-developed amnion-mupirocin (AM) powder formulation with standard of care dressing. Both treatments demonstrated comparable wound closure rates and a significant bacterial load reduction. However, hybrid dressing offered superior healed tissue quality, increased CD31 expression, and improved neovascularization compared to AM powder treatment with a temporally regulated CD31 expression pattern mirroring the natural healing progression. This can be attributed to the hybrid construct of the dressing that provides effective exudate management, preventing its accumulation that could otherwise hinder angiogenesis, along with replenishment of wound bed with regenerative factors, aiding in mimicking the natural healing cascades.

Genetic and bioactive functionalization of bioinks for 3D bioprinting

3D bioprinting is revolutionizing tissue engineering and regenerative medicine by enabling the precise fabrication of biologically functional constructs. At its core, the success of 3D bioprinting hinges on the development of bioinks, hydrogel-based materials that support cellular viability, proliferation, and differentiation. However, conventional bioinks face limitations in mechanical strength, biological activity, and customization. Recent advancements in genetic engineering have addressed these challenges by enhancing the properties of bioinks through genetic modifications. These innovations allow the integration of stimuli-responsive elements, bioactive molecules, and extracellular matrix (ECM) components, significantly improving the mechanical integrity, biocompatibility, and functional adaptability of bioinks. This review explores the state-of-the-art genetic approaches to bioink development, emphasizing microbial engineering, genetic functionalization, and the encapsulation of growth factors. It highlights the transformative potential of genetically modified bioinks in various applications, including bone and cartilage regeneration, cardiac and liver tissue engineering, neural tissue reconstruction, and vascularization. While these advances hold promise for personalized and adaptive therapeutic solutions, challenges in scalability, reproducibility, and integration with multi-material systems persist. By bridging genetics and bioprinting, this interdisciplinary field paves the way for sophisticated constructs and innovative therapies in tissue engineering and regenerative medicine.

Recent Advances in Three-Dimensional In Vitro Models for Studies of Liver Fibrosis

BACKGROUND

Liver fibrosis is a reversible but complex pathological condition associated with chronic liver diseases, affecting over 1.5 billion people worldwide. It is characterized by excessive extracellular matrix deposition resulting from sustained liver injury, often advancing to cirrhosis and cancer. As its progression involves various cell types and pathogenic factors, understanding the intricate mechanisms is essential for the development of effective therapies. In this context, extensive efforts have been made to establish three-dimensional (3D) in vitro platforms that mimic the progression of liver fibrosis.

METHODS

This review outlines the pathophysiology of liver fibrosis and highlights recent advancements in 3D in vitro liver models, including spheroids, organoids, assembloids, bioprinted constructs, and microfluidic systems. It further assesses their biological relevance, with particular focus on their capacity to reproduce fibrosis-related characteristics.

RESULTS

3D in vitro liver models offer significant advantages over conventional two-dimensional cultures. Although each model exhibits unique strengths, they collectively recapitulate key fibrotic features, such as extracellular matrix remodeling, hepatic stellate cell activation, and collagen deposition, in a physiologically relevant 3D setting. In particular, multilineage liver organoids and assembloids integrate architectural complexity with scalability, enabling deeper mechanistic insights and supporting therapeutic evaluation with improved translational relevance.

CONCLUSION

3D in vitro liver models represent a promising strategy to bridge the gap between in vitro studies and in vivo realities by faithfully replicating liver-specific architecture and microenvironments. With enhanced reproducibility through standardized protocols, these models hold great potential for advancing drug discovery and facilitating the development of personalized therapies for liver fibrosis.

3D Bioprinting Models for Glioblastoma: From Scaffold Design to Therapeutic Application

Conventional in vitro models fail to accurately mimic the tumor in vivo characteristics, being appointed as one of the causes of clinical attrition rate. Recent advances in 3D culture techniques, replicating essential physical and biochemical cues such as cell-cell and cell-extracellular matrix interactions, have led to the development of more realistic tumor models. Bioprinting has emerged to advance the creation of 3D in vitro models, providing enhanced flexibility, scalability, and reproducibility. This is crucial for the development of more effective drug treatments, and glioblastoma (GBM) is no exception. GBM, the most common and deadly brain cancer, remains a major challenge, with a median survival of only 15 months post-diagnosis. This review highlights the key components needed for 3D bioprinted GBM models. It encompasses an analysis of natural and synthetic biomaterials, along with crosslinking methods to improve structural integrity. Also, it critically evaluates current 3D bioprinted GBM models and their integration into GBM-on-a-chip platforms, which hold noteworthy potential for drug screening and personalized therapies. A versatile development framework grounded on Quality-by-Design principles is proposed to guide the design of bioprinting models. Future perspectives, including 4D bioprinting and machine learning approaches, are discussed, along with the current gaps to advance the field further.

Machine Learning-Enhanced Optimization for High-Throughput Precision in Cellular Droplet Bioprinting

Organoids produce through traditional manual pipetting methods face challenges such as labor-intensive procedures and batch-to-batch variability in quality. To ensure consistent organoid production, 3D bioprinting platforms offer a more efficient alternative. However, optimizing multiple printing parameters to achieve the desired organoid size remains a time-consuming and costly endeavor. To address these obstacles, machine learning is employed to optimize five critical printing parameters (i.e., bioink viscosity, nozzle size, printing time, printing pressure, and cell concentration), and develop algorithms capable of immediate cellular droplet size prediction. In this study, a high-throughput cellular droplet bioprinter is designed, capable of printing over 50 cellular droplets simultaneously, producing the large dataset required for effective machine learning training. Among the five algorithms evaluated, the multilayer perceptron model demonstrates the highest prediction accuracy, while the decision tree model offers the fastest computation time. Finally, these top-performing machine learning models are integrated into a user-friendly interface to streamline usability. The bioprinting parameter optimization platform develops in this study is expected to create significant synergy when combined with various bioprinting technologies, advancing the scalable production of organoids for a range of applications.

3D bioprinting: Advancing the future of food production layer by layer

3D bioprinting is an advanced manufacturing technique that involves the precise layer-by-layer deposition of biomaterials, such as cells, growth factors, and biomimetic scaffolds, to create three-dimensional living structures. It essentially combines the complexity of biology with the principles of 3D printing, making it possible to fabricate complex biological structures with extreme control and accuracy. This review discusses how 3D bioprinting is developing as an essential step in the creation of alternative food such as cultured meat and seafood. In light of the growing global issues associated with food sustainability and the ethical challenges raised by conventional animal agriculture, 3D bioprinting is emerging as a key technology that will transform food production in the years to come. This paper also addresses in detail each of the components that make up bioprinting systems, such as the bioinks and scaffolds used, the various types of bioprinter models, and the software systems that control the production process. It offers a thorough examination of the processes involved in printing diverse food items using bioprinting. Beyond the scope of this conversation, 3D bioprinting, which provides superior precision and scalability in tissue engineering, is a crucial node in the broader system of cultured meat and seafood production. But like any emerging technology, 3D bioprinting has its limitations. In light of this, this study emphasizes the necessity of ongoing research and development to advance bioprinting towards widespread use and, ultimately, promote a more resilient, ethical, and sustainable food supply system.

Novel Protein-Rich Bioactive Bioink Stimulates Cellular Proliferation and Response in 3D Bioprinted Volumetric Constructs

3D extrusion bioprinting, a promising and widely adopted technology in the emerging field of biofabrication, has gained considerable attention for its ability to fabricate hierarchically structured, native-mimicking tissue substitutes with precisely defined cell distributions. Despite notable advancements, the limited availability of suitably bioactive bioinks remains a major challenge, hindering the construction of volumetric tissue substitutes effectively mimicking biological functionality. Therefore, this work proposes a protein-rich, low-cost, bioactive bioink: abundantly available eggwhite powder (EWP) is leveraged to functionalize an alginate-methylcellulose (AlgMC) hydrogel matrix and enhance cellular response. The developed EWP-supplemented bioinks not only maintain favorable printability and high shape fidelity but also exhibit remarkable bioactivity. Notably, incorporating EWP into AlgMC-based bioinks enhances shear-thinning features, thereby improving the viability of encapsulated cells within the bioprinted constructs. The versatility and biofunctionality of EWP in bioprinted constructs are demonstrated using three distinct cell types, encompassing sources such as a stem cell line, human soft skin, and stiff bone tissues. Furthermore, the promising and wide applicability of the EWP-supplemented bioink for biofabrication is demonstrated exemplarily in core-shell and multi-channel bioprinting strategies as a proof-of-concept for functional tissue construction. These findings underscore the significant and versatile potential of this novel bioink in biofabrication and biomedical applications.

3D bioprinting technology for modeling vascular diseases and its application

In vitromodeling of vascular diseases provides a useful platform for drug screening and mechanistic studies, by recapitulating the essential structures and physiological characteristics of the native tissue. Bioprinting is an emerging technique that offers high-resolution 3D capabilities, which have recently been employed in the modeling of various tissues and associated diseases. Blood vessels are composed of multiple layers of distinct cell types, and experience different mechanical conditions depending on the vessel type. The intimal layer, in particular, is directly exposed to such hemodynamic conditions inducing shear stress, which in turn influence vascular physiology. 3D bioprinting techniques have addressed the structural limitations of the previous vascular models, by incorporating supporting cells such as smooth muscle cells, geometrical properties such as dilation, curvature, or branching, or mechanical stimulation such as shear stress and pulsatile pressure. This paper presents a review of the physiology of blood vessels along with the pathophysiology of the target diseases including atherosclerosis, thrombosis, aneurysms, and tumor angiogenesis. Additionally, it discusses recent advances in fabricatingin vitro3D vascular disease models utilizing bioprinting techniques, while addressing the current challenges and future perspectives for the potential clinical translation into therapeutic interventions.

Using Three-Dimensional Bioprinting to Generate Realistic Models of Wound Healing

Significance: The skin serves as the primary defense against external stimuli, making it vulnerable to damage. Injuries can cause a dysregulated environment, resulting in chronic inflammation and inhibition of cell proliferation and migration, which delays recovery. Innovative approaches, such as three-dimensional (3D) bioprinting, can foster a controlled healing environment by promoting synergy between the skin microbiome and cells. Recent Advances: Traditional approaches to wound healing have focused on fostering an environment conducive to the interplay between cells, extracellular proteins, and growth factors. 3D bioprinting, a manufacturing technology with applications in tissue engineering, deposits biomaterial-based bioink containing living cells to fabricate custom-designed tissue scaffolds in a layer-by-layer fashion. This process controls the architecture and composition of a construct, producing multilayered and complex structures such as skin. Critical Issues: The selection of biomaterials for scaffolds has been a challenge when 3D skin tissue engineering. While prioritizing mechanical properties, current biomaterials often lack the ability to interact with environmental stimuli such as pH, temperature, or oxygen levels. Employing smart biomaterials that integrate bioactive molecules and adapt to external conditions could overcome these limitations. This innovation would enable scaffolds to create a sustainable wound-healing environment, fostering microbiome balance, reducing inflammation, and facilitating cellular recovery and tissue restoration, addressing critical gaps in existing wound care solutions. Future Directions: Novel bioink formulations for skin injury recovery are focused on improving long-term cell viability, proliferation, vascularization, and immune integration. Efficient recovery of the skin microbiome using bioactive molecules has the potential to create microenriched environments that support the recovery of the skin microbiome and restore immune regulation. This promising direction for future research aims to improve patient outcomes in wound care.

Innovative 3D printing technologies and advanced materials revolutionizing orthopedic surgery: current applications and future directions

Three-dimensional (3D) printing has rapidly become a transformative force in orthopedic surgery, enabling the creation of highly customized and precise medical implants and surgical tools. This review aims to provide a more systematic and comprehensive perspective on emerging 3D printing technologies-ranging from extrusion-based methods and bioink printing to powder bed fusion-and the broadening array of materials, including bioactive agents and cell-laden inks. We highlight how these technologies and materials are employed to fabricate patient-specific implants, surgical guides, prosthetics, and advanced tissue engineering scaffolds, significantly enhancing surgical outcomes and patient recovery. Despite notable progress, the field faces challenges such as optimizing mechanical properties, ensuring structural integrity, addressing regulatory complexities across different regions, and considering environmental impacts and cost barriers, especially in low-resource settings. Looking ahead, innovations in smart materials and functionally graded materials (FGMs), along with advancements in bioprinting, hold promise for overcoming these obstacles and expanding the capabilities of 3D printing in orthopedics. This review underscores the pivotal role of interdisciplinary collaboration and ongoing research in harnessing the full potential of additive manufacturing, ultimately paving the way for more effective, personalized, and durable orthopedic solutions that improve patient quality of life.

Recent advances in 3D bioprinted polysaccharide hydrogels for biomedical applications: A comprehensive review

Polysaccharide hydrogels, which can mimic the natural extracellular matrix and possess appealing physicochemical and biological characteristics, have emerged as significant bioinks for 3D bioprinting. They are highly promising for applications in tissue engineering and regenerative medicine because of their ability to enhance cell adhesion, proliferation, and differentiation in a manner akin to the natural cellular environment. This review comprehensively examines the fabrication methods, characteristics, and applications of polysaccharide hydrogel-driven 3D bioprinting, underscoring its potential in tissue engineering, drug delivery, and regenerative medicine. To contribute pertinent knowledge for future research in this field, this review critically examines key aspects, including the chemistry of carbohydrates, manufacturing techniques, formulation of bioinks, and characterization of polysaccharide-based hydrogels. Furthermore, this review explores the primary advancements and applications of 3D-printed polysaccharide hydrogels, encompassing drug delivery systems with controlled release kinetics and targeted therapy, along with tissue-engineered constructs for bone, cartilage, skin, and vascular regeneration. The use of these 3D bioprinted hydrogels in innovative research fields, including disease modeling and drug screening, is also addressed. Despite notable progress, challenges, including modulating the chemistry and properties of polysaccharides, enhancing bioink printability and mechanical properties, and achieving long-term in vivo stability, have been highlighted.

Insights on the role of cryoprotectants in enhancing the properties of bioinks required for cryobioprinting of biological constructs

Preservation and long-term storage of readily available cell-laden tissue-engineered products are major challenges in expanding their applications in healthcare. In recent years, there has been increasing interest in the development of off-the-shelf tissue-engineered products using the cryobioprinting approach. Here, bioinks are incorporated with cryoprotective agents (CPAs) to allow the fabrication of cryopreservable tissue constructs. Although this method has shown potential in the fabrication of cryopreservable tissue-engineered products, the impact of the CPAs on the viscoelastic behavior and printability of the bioinks at cryo conditions remains unexplored. In this study, we have evaluated the influence of CPAs such as glycerol and dimethyl sulfoxide (DMSO) on the rheological properties of pre-crosslinked alginate bioinks for cryoprinting applications. DMSO-incorporated bioinks showed a reduction in viscosity and yield stress, while the addition of glycerol improved both the properties due to interactions with the calcium chloride used for pre-crosslinking. Further, tube inversion and printability experiments were performed to identify suitable concentrations and cryobioprinting conditions for bioinks containing CPAs & pre-crosslinked with CaCl2. Finally, based on the printability analysis & cell recovery results, 10% glycerol was used for cryobioprinting and preservation of cell-laden constructs at -80 °C and the viability of cells within the printed structures were evaluated after recovery. Cell viability results indicate that the addition of 10% glycerol to the pre-crosslinked bioink significantly improved cell viability compared to bioinks without CPAs, confirming the suitability of the developed bioink combination to fabricate tissue constructs for on-demand applications.

3D Bioprinting a Novel Skin Co-Culture Model Using Human Keratinocytes and Fibroblasts

3D bioprinting can generate the organized structures found in human skin for a variety of biological, medical, and pharmaceutical applications. Challenges in bioprinting skin include printing different types of cells in the same construct while maintaining their viability, which depends on the type of bioprinter and bioinks used. This study evaluated a novel 3D bioprinted skin model containing human keratinocytes (HEKa) and human dermal fibroblasts (HDF) in co-culture (CC) using a high-viscosity fibrin-based bioink produced using the BioX extrusion-based bioprinter. The constructs containing HEKa or HDF cells alone (control groups) and in CC were evaluated at 1, 10, and 20 days after bioprinting for viability, immunocytochemistry for specific markers (K5 and K10 for keratinocytes; vimentin and fibroblast specific protein [FSP] for fibroblasts). The storage, loss modulus, and viscosity properties of the constructs were also assessed to compare the effects of keratinocytes and fibroblasts individually and combined, providing important insights when bioprinting skin. Our findings revealed significantly higher cell viability in the CC group compared to individual keratinocyte and fibroblast groups, suggesting the combined cell presence enhanced survival rates. Additionally, proliferation rates of both cell types remained consistent over time, indicating non-competitive growth within the construct. Interestingly, keratinocytes exhibited a greater impact on the viscoelastic properties of the construct compared to fibroblasts, likely due to their larger size and arrangement. These insights contribute to optimizing bioprinting strategies for skin tissue engineering and emphasize the important role of different cell types in 3D skin models.

Development of a low-dose strategy for propagation-based imaging helical computed tomography (PBI-HCT): high image quality and reduced radiation dose

Background. Propagation-based imaging computed tomography (PBI-CT) has been recently emerging for visualizing low-density materials due to its excellent image contrast and high resolution. Based on this, PBI-CT with a helical acquisition mode (PBI-HCT) offers superior imaging quality (e.g., fewer ring artifacts) and dose uniformity, making it ideal for biomedical imaging applications. However, the excessive radiation dose associated with high-resolution PBI-HCT may potentially harm objects or hosts being imaged, especially in live animal imaging, raising a great need to reduce radiation dose.Methods. In this study, we strategically integrated Sparse2Noise (a deep learning approach) with PBI-HCT imaging to reduce radiation dose without compromising image quality. Sparse2Noise uses paired low-dose noisy images with different photon fluxes and projection numbers for high-quality reconstruction via a convolutional neural network (CNN). Then, we examined the imaging quality and radiation dose of PBI-HCT imaging using Sparse2Noise, as compared to when Sparse2Noise was used in low-dose PBI-CT imaging (circular scanning mode). Furthermore, we conducted a comparison study on the use of Sparse2Noise versus two other state-of-the-art low-dose imaging algorithms (i.e., Noise2Noise and Noise2Inverse) for imaging low-density materials using PBI-HCT at equivalent dose levels.Results. Sparse2Noise allowed for a 90% dose reduction in PBI-HCT imaging while maintaining high image quality. As compared to PBI-CT imaging, the use of Sparse2Noise in PBI-HCT imaging shows more effective by reducing additional radiation dose (30%-36%). Furthermore, helical scanning mode also enhances the performance of existing low-dose algorithms (Noise2Noise and Noise2Inverse); nevertheless, Sparse2Noise shows significantly higher signal-to-noise ratio (SNR) value compared to Noise2Noise and Noise2Inverse at the same radiation dose level.Conclusions and significance. Our proposed low-dose imaging strategy Sparse2Noise can be effectively applied to PBI-HCT imaging technique and requires lower dose for acceptable quality imaging. This would represent a significant advance imaging for low-density materials imaging and for future live animals imaging applications.

The Promise and Challenges of Bioprinting in Tissue Engineering

Organ transplantation, biomimetic organ models, and the restoration of damaged or eviscerated tissues have been key goals in surgical and medical research since their inception [...].

From lab to life: advances inin-situbioprinting and bioink technology

Bioprinting has the potential to revolutionize tissue engineering and regenerative medicine, offering innovative solutions for complex medical challenges and addressing unmet clinical needs. However, traditionalin vitrobioprinting techniques face significant limitations, including difficulties in fabricating and implanting scaffolds with irregular shapes, as well as limited accessibility for rapid clinical application. To overcome these challenges,in-situbioprinting has emerged as a groundbreaking approach that enables the direct deposition of cells, biomaterials, and bioactive factors onto damaged organs or tissues, eliminating the need for pre-fabricated 3D constructs. This method promises a personalized, patient-specific approach to treatment, aligning well with the principles of precision medicine. The success ofin-situbioprinting largely depends on the advancement of bioinks, which are essential for maintaining cell viability and supporting tissue development. Recent innovations in hand-held bioprinting devices and robotic arms have further enhanced the flexibility ofin-situbioprinting, making it applicable to various tissue types, such as skin, hair, muscle, bone, cartilage, and composite tissues. This review examinesin-situbioprinting techniques, the development of smart, multifunctional bioinks, and their essential properties for promoting cell viability and tissue growth. It highlights the versatility and recent advancements inin-situbioprinting methods and their applications in regenerating a wide range of tissues and organs. Furthermore, it addresses the key challenges that must be overcome for broader clinical adoption and propose strategies to advance these technologies toward mainstream medical practice.

Leveraging printability and biocompatibility in materials for printing implantable vessel scaffolds

Vessel scaffolds are crucial for treating cardiovascular diseases (CVDs). It is currently feasible to fabricate vessel scaffolds from a variety of materials using traditional fabrication methods, but the risks of thrombus formation, chronic inflammation, and atherosclerosis associated with these scaffolds have led to significant limitations in the clinical usages. Bioprinting, as an emerging technology, has great potential in constructing implantable vessel scaffolds. During the fabrication of the constructs, the biomaterials used for bioprinting have offered significant contributions for the successful fabrications of the vessel scaffolds. Herein, we review recent advances in biomaterials for bioprinting implantable vessel scaffolds. First, we briefly introduce the requirements for implantable vessel scaffolds and its conventional manufacturing methods. Next, a brief overview of the classic methods for bioprinting vessel scaffolds is presented. Subsequently, we provide an in-depth analysis of the properties of the representative natural, synthetic, composite and hybrid biomaterials that can be used for bioprinting implantable vessel scaffolds. Ultimately, we underscore the necessity of leveraging biocompatibility and printability for biomaterials, and explore the unmet needs and potential applications of these biomaterials in the field of bioprinted implantable vessel scaffolds.

Integration of bioprinting advances and biomechanical strategies forin vitrolung modelling

The recent occurrence of the Covid-19 pandemic and frequent wildfires have worsened pulmonary diseases and raised the urgent need for investigating host-pathogen interactions and advancing drug and vaccine therapies. Historically, research and experimental studies have relied on two-dimensional cell culture dishes and/or animal models, which suffer from physiological differences from the human lung. More recently, there has been investigation into the use of lung-on-a-chip models and organoids, while the use of bioprinting technologies has also emerged to fabricate three-dimensional constructs or lung models with enhanced physiological relevance. Concurrently, achievements have also been made to develop biomimetic strategies for simulating thein vivobiomechanical conditions induced by lung breathing, though challenges remain with incorporating these strategies with bioprinted models. Bioprinted models combined with advanced biomimetic strategies would represent a promising approach to advance disease discovery and therapeutic development. As inspired, this article briefly reviews the recent progress of both bioprintedin vitrolung models and biomechanical strategies, with a focus on native lung tissue microstructure and biomechanical properties, bioprinted constructs, and biomimetic strategies to mimic the native environment. This article also urges that the integration of bioprinting advances and biomimetic strategies would be essential to achieve synergistic effects forin vitrolung modelling. Key issues and challenges are also identified and discussed along with recommendations for future research.

Advancing Cartilage Tissue Engineering: A Review of 3D Bioprinting Approaches and Bioink Properties

Articular cartilage is crucial in human physiology, and its degeneration poses a significant public health challenge. While recent advancements in 3D bioprinting and tissue engineering show promise for cartilage regeneration, there remains a gap between research findings and clinical application. This review critically examines the mechanical and biological properties of hyaline cartilage, along with current 3D manufacturing methods and analysis techniques. Moreover, we provide a quantitative synthesis of bioink properties used in cartilage tissue engineering. After screening 181 initial works, 33 studies using extrusion bioprinting were analyzed and synthesized, presenting results that indicate the main materials, cells, and methods utilized for mechanical and biological evaluation. Altogether, this review motivates the standardization of mechanical analyses and biomaterial assessments of 3D bioprinted constructs to clarify their chondrogenic potential.

Comparative analysis of porcine-uterine decellularization for bioactive-molecule preservation and DNA removal

Introduction

Decellularized uterine extracellular matrix has emerged as a pivotal focus in the realm of biomaterials, offering a promising source in uterine tissue regeneration, research on disease diagnosis and treatments, and ultimately uterine transplantation. In this study, we examined various protocols for decellularizing porcine uterine tissues, aimed to unravel the intricate dynamics of DNA removal, bioactive molecules preservation, and microstructural alterations.

Methods

Porcine uterine tissues were treated with 6 different, yet rigorously selected and designed, protocols with sodium dodecyl sulfate (SDS), Triton® X-100, peracetic acid + ethanol, and DNase I. After decellularization, we examined DNA quantification, histological staining (H&E and DAPI), glycosaminoglycans (GAG) assay, scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and Thermogravimetric Analysis (TGA).

Results

A comparative analysis among all 6 protocols was conducted with the results demonstrating that all protocols achieved decellularization; while 0.1% SDS + 1% Triton® X-100, coupled with agitation, demonstrated the highest efficiency in DNA removal. Also, it was found that DNase I played a key role in enhancing the efficiency of the decellularization process by underscoring its significance in digesting cellular contents and eliminating cell debris by 99.79% (19.63 ± 3.92 ng/mg dry weight).

Conclusions

Our findings enhance the nuanced understanding of DNA removal, GAG preservation, microstructural alteration, and protein decomposition in decellularized uterine extracellular matrix, while highlighting the importance of decellularization protocols designed for intended applications. This study along with our findings represents meaningful progress for advancing the field of uterine transplantation and related tissue engineering/regenerative medicine.

Construction Form and Application of Three-Dimensional Bioprinting Ink Containing Hydroxyapatite

With the increasing prevalence of bone tissue diseases, three-dimensional (3D) bioprinting applied to bone tissue engineering for treatment has received a lot of interests in recent years. The research and popularization of 3D bioprinting in bone tissue engineering require bioinks with good performance, which is closely related to ideal material and appropriate construction form. Hydroxyapatite (HAp) is the inorganic component of natural bone and has been widely used in bone tissue engineering and other fields due to its good biological and physicochemical properties. Previous studies have prepared different bioinks containing HAp and evaluated their properties in various aspects. Most bioinks showed significant improvement in terms of rheology and biocompatibility; however, not all of them had sufficiently favorable mechanical properties and antimicrobial activity. The deficiencies in properties of bioink and 3D bioprinting technology limited the applications of bioinks containing HAp in clinical trials. This review article summarizes the construction forms of bioinks containing HAp and its modifications in previous studies, as well as the 3D bioprinting techniques adopted to print bioink containing HAp. In addition, this article summarizes the advantages and underlying mechanisms of bioink containing HAp, as well as its limitations, and suggests possible improvement to facilitate the development of bone tissue engineering bioinks containing HAp in the future.

Bioprinting of Cells, Organoids and Organs-on-a-Chip Together with Hydrogels Improves Structural and Mechanical Cues

The 3D bioprinting technique has made enormous progress in tissue engineering, regenerative medicine and research into diseases such as cancer. Apart from individual cells, a collection of cells, such as organoids, can be printed in combination with various hydrogels. It can be hypothesized that 3D bioprinting will even become a promising tool for mechanobiological analyses of cells, organoids and their matrix environments in highly defined and precisely structured 3D environments, in which the mechanical properties of the cell environment can be individually adjusted. Mechanical obstacles or bead markers can be integrated into bioprinted samples to analyze mechanical deformations and forces within these bioprinted constructs, such as 3D organoids, and to perform biophysical analysis in complex 3D systems, which are still not standard techniques. The review highlights the advances of 3D and 4D printing technologies in integrating mechanobiological cues so that the next step will be a detailed analysis of key future biophysical research directions in organoid generation for the development of disease model systems, tissue regeneration and drug testing from a biophysical perspective. Finally, the review highlights the combination of bioprinted hydrogels, such as pure natural or synthetic hydrogels and mixtures, with organoids, organoid-cell co-cultures, organ-on-a-chip systems and organoid-organ-on-a chip combinations and introduces the use of assembloids to determine the mutual interactions of different cell types and cell-matrix interferences in specific biological and mechanical environments.

Evaluating cells metabolic activity of bioinks for bioprinting: the role of cell-laden hydrogels and 3D printing on cell survival

Introduction

Tissue engineering has advanced significantly in recent years, owing primarily to additive manufacturing technology and the combination of biomaterials and cells known as 3D cell printing or Bioprinting. Nonetheless, various obstacles remain developing adequate 3D printed structures for biomedical applications, including bioinks optimization to meet biocompatibility and printability standards. Hydrogels are among the most intriguing bioinks because they mimic the natural extracellular matrix found in connective tissues and can create a highly hydrated environment that promotes cell attachment and proliferation; however, their mechanical properties are weak and difficult to control, making it difficult to print a proper 3D structure.

Methods

In this research, hydrogels based on Alginate and Gelatin are tested to evaluate the metabolic activity, going beyond the qualitative evaluation of cell viability. The easy-to-make hydrogel has been chosen due to the osmotic requirements of the cells for their metabolism, and the possibility to combine temperature and chemical crosslinking. Different compositions (%w/v) are tested (8% gel-7% alg, 4% gel-4% alg, 4% gel-2% alg), in order to obtain a 3D structure up to 10.3 ± 1.4 mm.

Results

The goal of this paper is to validate the obtained cell-laden 3D structures in terms of cell metabolic activity up to 7 days, further highlighting the difference between printed and not printed cell-laden hydrogels. To this end, MS5 cells viability is determined by implementing the live/dead staining with the analysis of the cellular metabolic activity through ATP assay, enhancing the evaluation of the actual cells activity over cells number.

Discussion

The results of the two tests are not always comparable, indicating that they are not interchangeable but provide complementary pieces of information.

Biofabrication of engineered tissues by 3D bioprinting of tissue specific high cell-density bioinks

Bioprinting of high cell-density bioinks is a promising technique for cellular condensation-based tissue engineering and regeneration medicine. However, it remains difficult to create precisely controlled complex structures and organization of tissues with high cell-density bioink-based bioprinting for tissue specific condensation. In this study, we present newly biofabricated tissues from directly assembled, tissue specific, high cell-density bioinks which have been three-dimensionally printed into a photocrosslinkable and biodegradable hydrogel microparticle supporting bath. Three types of tissue specific high cell-density bioinks have been prepared with individual stem cells or stem cell aggregates by incorporation of growth factor-loaded gelatin microparticles. The bioprinted tissue specific high cell-density bioinks in the photocrosslinked microgel supporting bath condense together and differentiate down tissue-specific lineages to form multi-phase tissues (e.g., osteochondral tissues). By changing the growth factors and cell types, these tissue specific high cell-density bioinks enable engineering of various functional tissues with controlled architecture and organization of cells.

Cardiac Tissue Engineering: A Journey from Scaffold Fabrication to In Vitro Characterization

Cardiac tissue engineering has been rapidly evolving with diverse applications, ranging from the repair of fibrotic tissue caused by "adverse remodeling," to the replacement of specific segments of heart tissue, and ultimately to the creation of a whole heart. The repair or replacement of cardiac tissue often involves the development of tissue scaffolds or constructs and the subsequent assessment of their performance and functionality. For this, the design and/or selection of biomaterials, and cell types, scaffold fabrication, and in vitro characterizations are the first starting points, yet critical, to ensure success in subsequent implantation in vivo. This highlights the importance of scaffold fabrication and in vitro experiments/characterization with protocols for cardiac tissue engineering. Yet, a comprehensive and critical review of these has not been established and documented. As inspired, herein, the latest development and advances in scaffold fabrication and in vitro characterization for cardiac tissue engineering are critically reviewed, with focus on biomaterials, cell types, additive manufacturing techniques for scaffold fabrication, and common in vitro characterization techniques or methods. This article would be of benefit to the ones who are working on cardiac tissue engineering by providing insights into the scaffold fabrication and in vitro investigations.

Biomaterials for extrusion-based bioprinting and biomedical applications

Amongst the range of bioprinting technologies currently available, bioprinting by material extrusion is gaining increasing popularity due to accessibility, low cost, and the absence of energy sources, such as lasers, which may significantly damage the cells. New applications of extrusion-based bioprinting are systematically emerging in the biomedical field in relation to tissue and organ fabrication. Extrusion-based bioprinting presents a series of specific challenges in relation to achievable resolutions, accuracy and speed. Resolution and accuracy in particular are of paramount importance for the realization of microstructures (for example, vascularization) within tissues and organs. Another major theme of research is cell survival and functional preservation, as extruded bioinks have cells subjected to considerable shear stresses as they travel through the extrusion apparatus. Here, an overview of the main available extrusion-based printing technologies and related families of bioprinting materials (bioinks) is provided. The main challenges related to achieving resolution and accuracy whilst assuring cell viability and function are discussed in relation to specific application contexts in the field of tissue and organ fabrication.

Recent Advances in the Application of 3D-Printing Bioinks Based on Decellularized Extracellular Matrix in Tissue Engineering

In recent years, 3D bioprinting with various types of bioinks has been widely used in tissue engineering to fabricate human tissues and organs with appropriate biological functions. Decellularized extracellular matrix (dECM) is an excellent bioink candidate because it is enriched with a variety of bioactive proteins and bioactive factors and can provide a suitable environment for tissue repair or tissue regeneration while reducing the likelihood of severe immune rejection. In this Review, we systematically review recent advances in 3D bioprinting and decellularization technologies and comprehensively detail the latest research and applications of dECM as a bioink for tissue engineering in various systems, with the aim of providing a reference for researchers in tissue engineering to better understand the properties of dECM bioinks.

Applications of 3D Bioprinting Technology to Brain Cells and Brain Tumor Models: Special Emphasis to Glioblastoma

Primary brain tumor is one of the most fatal diseases. The most malignant type among them, glioblastoma (GBM), has low survival rates. Standard treatments reduce the life quality of patients due to serious side effects. Tumor aggressiveness and the unique structure of the brain render the removal of tumors and the development of new therapies challenging. To elucidate the characteristics of brain tumors and examine their response to drugs, realistic systems that mimic the tumor environment and cellular crosstalk are desperately needed. In the past decade, 3D GBM models have been presented as excellent platforms as they allowed the investigation of the phenotypes of GBM and testing innovative therapeutic strategies. In that scope, 3D bioprinting technology offers utilities such as fabricating realistic 3D bioprinted structures in a layer-by-layer manner and precisely controlled deposition of materials and cells, and they can be integrated with other technologies like the microfluidics approach. This Review covers studies that investigated 3D bioprinted brain tumor models, especially GBM using 3D bioprinting techniques and essential parameters that affect the result and quality of the study like frequently used cells, the type and physical characteristics of hydrogel, bioprinting conditions, cross-linking methods, and characterization techniques.

Characterization of a Chimeric Resilin-Elastin Structural Protein Dedicated to 3D Bioprinting as a Bioink Component

In this study we propose to use for bioprinting a bioink enriched with a recombinant RE15mR protein with a molecular weight of 26 kDa, containing functional sequences derived from resilin and elastin. The resulting protein also contains RGD sequences in its structure, as well as a metalloproteinase cleavage site, allowing positive interaction with the cells seeded on the construct and remodeling the structure of this protein in situ. The described protein is produced in a prokaryotic expression system using an E. coli bacterial strain and purified by a process using a unique combination of known methods not previously used for recombinant elastin-like proteins. The positive effect of RE15mR on the mechanical, physico-chemical, and biological properties of the print is shown in the attached results. The addition of RE15mR to the bioink resulted in improved mechanical and physicochemical properties and promoted the habitation of the prints by cells of the L-929 line.

Creation of Porous, Perfusable Microtubular Networks for Improved Cell Viability in Volumetric Hydrogels

The creation of large, volumetric tissue-engineered constructs has long been hindered due to the lack of effective vascularization strategies. Recently, 3D printing has emerged as a viable approach to creating vascular structures; however, its application is limited. Here, we present a simple and controllable technique to produce porous, free-standing, perfusable tubular networks from sacrificial templates of polyelectrolyte complex and coatings of salt-containing citrate-based elastomer poly(1,8-octanediol-co-citrate) (POC). As demonstrated, fully perfusable and interconnected POC tubular networks with channel diameters ranging from 100 to 400 μm were created. Incorporating NaCl particulates into the POC coating enabled the formation of micropores (∼19 μm in diameter) in the tubular wall upon particulate leaching to increase the cross-wall fluid transport. Casting and cross-linking gelatin methacrylate (GelMA) suspended with human osteoblasts over the free-standing porous POC tubular networks led to the fabrication of 3D cell-encapsulated constructs. Compared to the constructs without POC tubular networks, those with either solid or porous wall tubular networks exhibited a significant increase in cell viability and proliferation along with healthy cell morphology, particularly those with porous networks. Taken together, the sacrificial template-assisted approach is effective to fabricate tubular networks with controllable channel diameter and patency, which can be easily incorporated into cell-encapsulated hydrogels or used as tissue-engineering scaffolds to improve cell viability.

AI energized hydrogel design, optimization and application in biomedicine

Traditional hydrogel design and optimization methods usually rely on repeated experiments, which is time-consuming and expensive, resulting in a slow-moving of advanced hydrogel development. With the rapid development of artificial intelligence (AI) technology and increasing material data, AI-energized design and optimization of hydrogels for biomedical applications has emerged as a revolutionary breakthrough in materials science. This review begins by outlining the history of AI and the potential advantages of using AI in the design and optimization of hydrogels, such as prediction and optimization of properties, multi-attribute optimization, high-throughput screening, automated material discovery, optimizing experimental design, and etc. Then, we focus on the various applications of hydrogels supported by AI technology in biomedicine, including drug delivery, bio-inks for advanced manufacturing, tissue repair, and biosensors, so as to provide a clear and comprehensive understanding of researchers in this field. Finally, we discuss the future directions and prospects, and provide a new perspective for the research and development of novel hydrogel materials for biomedical applications.

Biofabrication paradigms in corneal regeneration: bridging bioprinting techniques, natural bioinks, and stem cell therapeutics

Corneal diseases are a major cause of vision loss worldwide. Traditional methods like corneal transplants from donors are effective but face challenges like limited donor availability and the risk of graft rejection. Therefore, new treatment methods are essential. This review examines the growing field of bioprinting and biofabrication in corneal tissue engineering. We begin by discussing various bioprinting methods such as stereolithography, inkjet, and extrusion printing, highlighting their strengths and weaknesses for eye-related uses. We also explore how biological tissues are made suitable for bioprinting through a process called decellularization, which can be achieved using chemical, physical, or biological methods. The review then looks at natural materials, known as bioinks, used in bioprinting. We focus on materials like gelatin, collagen, fibrin, chitin, chitosan, silk fibroin, and alginate, examining their mechanical and biological properties. The importance of hydrogel scaffolds, particularly those based on collagen and other materials, is also discussed in the context of repairing corneal tissue. Another key area we cover is the use of stem cells in corneal regeneration. We pay special attention to limbal epithelial stem cells and mesenchymal stromal cells, highlighting their roles in this process. The review concludes with an overview of the latest advancements in corneal tissue bioprinting, from early techniques to advanced methods of delivering stem cells using bioengineered materials. In summary, this review presents the current state and future potential of bioprinting and biofabrication in creating functional corneal tissues, highlighting new developments and ongoing challenges with a view towards restoring vision.

Three-Dimensional Bioprinting: The Ultimate Pinnacle of Tissue Engineering

Three-dimensional (3D) bioprinting has emerged as a revolutionary additive manufacturing technology that can potentially enable life-changing medical treatments in regenerative medicine. It applies the principles of tissue engineering for the printing of tissues and organs in a layer-by-layer manner. This review focuses on the various 3D bioprinting technologies currently available, the different biomaterials, cells, and growth factors that can be utilized to develop tissue-specific bioinks, the different venues for applying these technologies, and the challenges this technology faces.

Electrochemical technique to develop surface-controlled polyaniline nano-tulips (PANINTs) on PCL-reinforced chitosan functionalized (CS-f-Fe2O3) scaffolds for stimulating osteoporotic bone regeneration

Bone defects pose significant challenges in orthopedic surgery, often leading to suboptimal outcomes and complications. Addressing these challenges, we employed a three-electrode electrochemical system to fabricate surface-controlled polyaniline nano-tulips (PANINTs) decorated polycaprolactone (PCL) reinforced chitosan functionalized iron oxide nanoparticles (CS-f-Fe2O3) scaffolds. These structures were designed to emulate the natural extracellular matrix (ECM) and promote enhanced osseointegration by establishing a continuous interface between host bone and graft, thereby improving both biological processes and mechanical stability. In vitro experiments demonstrated that PANINTs-PCL/CS-f-Fe2O3 substrates significantly promoted the proliferation, differentiation, and spontaneous outgrowth and extension of MC3T3-E1 cell activity. The nanomaterials exhibited increased cell viability and osteogenic differentiation, as evidenced by elevated expression of bone-related markers such as ALP, ARS, COL-I, RUNX2, and SPP-I, as determined by qRT-PCR. Our findings underscore the regenerative potential of in situ cell culture systems for bone defects, emphasizing the targeted stimulation of essential cell subpopulations to facilitate rapid bone tissue regeneration.

Synthesis of Alginate/Collagen Bioink for Bioprinting Respiratory Tissue Models

Synthesis of bioinks for bioprinting of respiratory tissue requires considerations related to immunogenicity, mechanical properties, printability, and cellular compatibility. Biomaterials can be tailored to provide the appropriate combination of these properties through the synergy of materials with individual pros and cons. Sodium alginate, a water-soluble polymer derived from seaweed, is a cheap yet printable biomaterial with good structural properties; however, it lacks physiological relevance and cell binding sites. Collagen, a common component in the extra cellular matrix of many tissues, is expensive and lacks printability; however, it is highly biocompatible and exhibits sites for cellular binding. This paper presents our study on the synthesis of bioinks from alginate and collagen for use in bioprinting respiratory tissue models. Bioinks were synthesized from 40 mg/mL (4%) alginate and 3 mg/mL (0.3%) collagen in varying ratios (1:0, 4:1, 3:1, 2:1, and 1:1); then examined in terms of rheological properties, printability, compressive, and tensile properties and cellular compatibility. The results illustrate that the ratio of alginate to collagen has a profound impact on bioink performance and that, among the examined ratios, the 3:1 ratio is the most appropriate for use in bioprinting respiratory tissue scaffolds.

3D-bioprinted alginate-based bioink scaffolds with β-tricalcium phosphate for bone regeneration applications

Background/purpose

3D-printed bone tissue engineering is becoming recognized as a key approach in dentistry for creating customized bone regeneration treatments fitting patients bone defects requirements. 3D bioprinting offers an innovative method to fabricate detailed 3D structures, closely emulating the native bone micro-environment and better bone regeneration. This study aimed to develop an 3D-bioprintable scaffold using a combination of alginate and β-tricalcium phosphate (β-TCP) with the Cellink® BioX printer, aiming to advance the field of tissue engineering.

Materials and methods

The physical and biological properties of the resulting 3D-printed scaffolds were evaluated at 10 %, 12 %, and 15 % alginate combined with 10 % β-TCP. The scaffolds were characterized through printability, swelling behavior, degradability, and element analysis. The biological assessment included cell viability, alkaline phosphatase (ALP) activity.

Results

10 % alginate/β-TCP 3D printed at 25 °C scaffold demonstrated the optimal condition for printability, swelling capability, and degradability of cell growth and nutrient diffusion. Addition of β-TCP particles significantly improved the 3D printed material viscosity over only alginate (P < 0.05). 10 % alginate/β-TCP enhanced MG-63 cell's proliferation (P < 0.05) and alkaline phosphatase activity (P < 0.001).

Conclusion

This study demonstrated in vitro that 10 % alginate/β-TCP bioink characteristic for fabricating 3D acellular bioprinted scaffolds was the best approach. 10 % alginate/β-TCP bioink 3D-printed scaffold exhibited superior physical properties and promoted enhanced cell viability and alkaline phosphatase activity, showing great potential for personalized bone regeneration treatments.

GelMA synthesis and sources comparison for 3D multimaterial bioprinting

Gelatin Methacryloyl (GelMA) is one of the most used biomaterials for a wide range of applications, such as drug delivery, disease modeling and tissue regeneration. GelMA is obtained from gelatin, which can be derived from different sources (e.g., bovine skin, and porcine skin), through substitution of reactive amine and hydroxyl groups with methacrylic anhydride (MAA). The degree of functionalization (DoF) can be tuned by varying the MAA amount used; thus, different protocols, with different reaction efficiency, have been developed, using various alkaline buffers (e.g., phosphate-buffered saline, DPBS, or carbonate-bicarbonate solution). Obviously, DoF modulation has an impact on the final GelMA properties, so a deep investigation on the features of the obtained hydrogel must be carried on. The purpose of this study is to investigate how different gelatin sources and synthesis methods affect GelMA properties, as literature lacks direct and systematic comparisons between these parameters, especially between synthesis methods. The final aim is to facilitate the choice of the source or synthesis method according to the needs of the desired application. Hence, chemical and physical properties of GelMA formulations were assessed, determining the DoFs, mechanical and viscoelastic properties by rheological analysis, water absorption by swelling capacity and enzymatic degradation rates. Biological tests with lung adenocarcinoma cells (A549) were performed. Moreover, since 3D bioprinting is a rapidly evolving technology thanks to the possibility of precise deposition of cell-laden biomaterials (bioinks) to mimic the 3D structures of several tissues, the potential of different GelMA formulations as bioinks have been tested with a multi-material approach, revealing its printability and versatility in various applications.

Hydrogel-mediated extracellular vesicles for enhanced wound healing: the latest progress, and their prospects for 3D bioprinting

Extracellular vesicles have shown promising tissue recovery-promoting effects, making them increasingly sought-after for their therapeutic potential in wound treatment. However, traditional extracellular vesicle applications suffer from limitations such as rapid degradation and short maintenance during wound administration. To address these challenges, a growing body of research highlights the role of hydrogels as effective carriers for sustained extracellular vesicle release, thereby facilitating wound healing. The combination of extracellular vesicles with hydrogels and the development of 3D bioprinting create composite hydrogel systems boasting excellent mechanical properties and biological activity, presenting a novel approach to wound healing and skin dressing. This comprehensive review explores the remarkable mechanical properties of hydrogels, specifically suited for loading extracellular vesicles. We delve into the diverse sources of extracellular vesicles and hydrogels, analyzing their integration within composite hydrogel formulations for wound treatment. Different composite methods as well as 3D bioprinting, adapted to varying conditions and construction strategies, are examined for their roles in promoting wound healing. The results highlight the potential of extracellular vesicle-laden hydrogels as advanced therapeutic tools in the field of wound treatment, offering both mechanical support and bioactive functions. By providing an in-depth examination of the various roles that these composite hydrogels can play in wound healing, this review sheds light on the promising directions for further research and development. Finally, we address the challenges associated with the application of composite hydrogels, along with emerging trends of 3D bioprinting in this domain. The discussion covers issues such as scalability, regulatory considerations, and the translation of this technology into practical clinical settings. In conclusion, this review underlines the significant contributions of hydrogel-mediated extracellular vesicle therapy to the field of 3D bioprinting and wound healing and tissue regeneration. It serves as a valuable resource for researchers and practitioners alike, fostering a deeper understanding of the potential benefits, applications, and challenges involved in utilizing composite hydrogels for wound treatment.

Biofabrication methods for reconstructing extracellular matrix mimetics

In the human body, almost all cells interact with extracellular matrices (ECMs), which have tissue and organ-specific compositions and architectures. These ECMs not only function as cellular scaffolds, providing structural support, but also play a crucial role in dynamically regulating various cellular functions. This comprehensive review delves into the examination of biofabrication strategies used to develop bioactive materials that accurately mimic one or more biophysical and biochemical properties of ECMs. We discuss the potential integration of these ECM-mimics into a range of physiological and pathological in vitro models, enhancing our understanding of cellular behavior and tissue organization. Lastly, we propose future research directions for ECM-mimics in the context of tissue engineering and organ-on-a-chip applications, offering potential advancements in therapeutic approaches and improved patient outcomes.

A 3D-Printed Dual Driving Forces Scaffold with Self-Promoted Cell Absorption for Spinal Cord Injury Repair

Stem cells play critical roles in cell therapies and tissue engineering for nerve repair. However, achieving effective delivery of high cell density remains a challenge. Here, a novel cell delivery platform termed the hyper expansion scaffold (HES) is developed to enable high cell loading. HES facilitated self-promoted and efficient cell absorption via a dual driving force model. In vitro tests revealed that the HES rapidly expanded 80-fold in size upon absorbing 2.6 million human amniotic epithelial stem cells (hAESCs) within 2 min, representing over a 400% increase in loading capacity versus controls. This enhanced uptake benefited from macroscopic swelling forces as well as microscale capillary action. In spinal cord injury (SCI) rats, HES-hAESCs promoted functional recovery and axonal projection by reducing neuroinflammation and improving the neurotrophic microenvironment surrounding the lesions. In summary, the dual driving forces model provides a new rationale for engineering hydrogel scaffolds to facilitate self-promoted cell absorption. The HES platform demonstrates great potential as a powerful and efficient vehicle for delivering high densities of hAESCs to promote clinical treatment and repair of SCI.

Sparse2Noise: Low-dose synchrotron X-ray tomography without high-quality reference data

BACKGROUND

Synchrotron radiation computed tomography (SR-CT) holds promise for high-resolution in vivo imaging. Notably, the reconstruction of SR-CT images necessitates a large set of data to be captured with sufficient photons from multiple angles, resulting in high radiation dose received by the object. Reducing the number of projections and/or photon flux is a straightforward means to lessen the radiation dose, however, compromises data completeness, thus introducing noises and artifacts. Deep learning (DL)-based supervised methods effectively denoise and remove artifacts, but they heavily depend on high-quality paired data acquired at high doses. Although algorithms exist for training without high-quality references, they struggle to effectively eliminate persistent artifacts present in real-world data.

METHODS

This work presents a novel low-dose imaging strategy namely Sparse2Noise, which combines the reconstruction data from paired sparse-view CT scan (normal-flux) and full-view CT scan (low-flux) using a convolutional neural network (CNN). Sparse2Noise does not require high-quality reconstructed data as references and allows for fresh training on data with very small size. Sparse2Noise was evaluated by both simulated and experimental data.

RESULTS

Sparse2Noise effectively reduces noise and ring artifacts while maintaining high image quality, outperforming state-of-the-art image denoising methods at same dose levels. Furthermore, Sparse2Noise produces impressive high image quality for ex vivo rat hindlimb imaging with the acceptable low radiation dose (i.e., 0.5 Gy with the isotropic voxel size of 26 μm).

CONCLUSIONS

This work represents a significant advance towards in vivo SR-CT imaging. It is noteworthy that Sparse2Noise can also be used for denoising in conventional CT and/or phase-contrast CT.