Pre-treatment optimization of Scenedesmus obliquus microalga for bioethanol production

Advancements in sustainable production of biofuel by microalgae: Recent insights and future directions

Microalgae is considered as sustainable and viable feedstock for biofuel production due to its significant advantages over terrestrial plants. Algal biofuels have received significant attention among researchers and energy experts owing to an upsurge in global energy issues emanating from depletion in fossil fuel reserves increasing greenhouse gases emission conflict among agricultural crops, traditional biomass feedstock, and potential futuristic energy security. Further, the exploration of value-added microalgae as sustainable and viable feedstock for the production of variety of biofuels such as biogas, bio-hydrogen, bioethanol, and biodiesel are addressed. Moreover, the assessment of life-cycle, energy balance, and environmental impacts of biofuel production from microalgae are briefly discussed. The present study focused on recent advancements in synthetic biology, metabolic engineering tools, algal bio refinery, and the optimization of algae growth conditions. This paper also elucidates the function of microalgae as bio refineries, the conditions of algae-based cultures, and other operational factors that must be adjusted to produce biofuels that are price-competitive with fossil fuels.

Third generation biobutanol production by Clostridium beijerinckii in a medium containing mixotrophically cultivated Dunaliella salina biomass

This study aims the third generation biobutanol production in P2 medium supplemented D. salina biomass mixotrophically cultivated with marble waste (MW). The wastes derived from the marble industry contain approximately 90% of carbon-rich compounds. Microalgal growth in mixotrophic conditions was optimized in the 0.4-2 g/L of MW concentration range. The highest microalgal concentration was obtained as 0.481 g/L in the presence of 1 g/L MW. Furthermore, some important parameters for the production of biobutanol, such as microalgal cultivation conditions, initial mixotrophic microalgal biomass loading (50-300 g/L), and fermentation time (24-96 h) were optimized. The highest biobutanol, total ABE, biobutanol yield and productivity were determined as 11.88 g/L, 13.89 g/L, 0.331 g/g and 0.165 g/L/h at the end of 72 h in P2 medium including 60 g/L glucose and 200 g/L microalgal biomass cultivated in 1 g/L MW, respectively. The results show that D. salina is a suitable raw material for supporting Clostridium beijerinckii DSMZ 6422 cells on biobutanol production. To the best of our knowledge, this is the first study on the use of MW which is a promising feedstock on the mixotrophic cultivation of D. salina for biobutanol production.

Optimization and Characterization of Spirulina and Chlorella Hydrolysates for Industrial Application

Chlorella and Spirulina are the most used microalgae mainly as powder, tablets, or capsules. However, the recent change in lifestyle of modern society encouraged the emergence of liquid food supplements. The current work evaluated the efficiency of several hydrolysis methods (ultrasound-assisted hydrolysis UAH, acid hydrolysis AH, autoclave-assisted hydrolysis AAH, and enzymatic hydrolysis EH) in order to develop liquid dietary supplements from Chlorella and Spirulina biomasses. Results showed that, EH gave the highest proteins content (78% and 31% for Spirulina and Chlorella, respectively) and also increased pigments content (4.5 mg/mL of phycocyanin and 12 µg/mL of carotenoids). Hydrolysates obtained with EH showed the highest scavenging activity (95-91%), allowing us, with the other above features, to propose this method as convenient for liquid food supplements development. Nevertheless, it has been shown that the choice of hydrolysis method depended on the vocation of the product to be prepared.

Reconstruction of a Genome-Scale Metabolic Model of Scenedesmus obliquus and Its Application for Lipid Production under Three Trophic Modes

Green microalgae have emerged as beneficial feedstocks for biofuel production. A systems-level understanding of the biochemical network is needed to harness the microalgal metabolic capacity for bioproduction. Genome-scale metabolic modeling (GEM) showed immense potential in rational metabolic engineering, utilizing biochemical flux distribution analysis. Here, we report the first GEM for the green microalga, Scenedesmus obliquus (iAR632), a promising biodiesel feedstock with high lipid-storing capability. iAR632 comprises 1467 reactions, 734 metabolites, and 632 genes distributed among 7 compartments. The model was optimized under three different trophic modes of microalgal cultivation, i.e., autotrophy, mixotrophy, and heterotrophy. The robustness of the reconstructed network was confirmed by analyzing its sensitivity to the biomass components. Pathway-level flux profiles were analyzed, and significant flux space expansion was noticed majorly in reactions associated with lipid biosynthesis. In agreement with the experimental observation, iAR632 predicted about 3.8-fold increased biomass and almost 4-fold higher lipid under mixotrophy than the other trophic modes. Thus, the assessment of the condition-specific metabolic flux distribution of iAR632 suggested that mixotrophy is the preferred cultivation condition for improved microalgal growth and lipid production. Overall, the reconstructed GEM and subsequent analyses will provide a systematic framework for developing model-driven strategies to improve microalgal bioproduction.

Microalgae to Bioenergy: Optimization of Aurantiochytrium sp. Saccharification

Microalgae are a promising feedstock for bioethanol production, essentially due to their high growth rates and absence of lignin. Hydrolysis-where the monosaccharides are released for further fermentation-is considered a critical step, and its optimization is advised for each raw material. The present study focuses on the thermal acid hydrolysis (with sulfuric acid) of Aurantiochytrium sp. through a response surface methodology (RSM), studying the effect of acid concentration, hydrolysis time and biomass/acid ratio on both sugar concentration of the hydrolysate and biomass conversion yield. Preliminary studies allowed to establish the range of the variables to be optimized. The obtained models predicted a maximum sugar concentration (18.05 g/L; R² = 0.990) after 90 min of hydrolysis, using 15% (w/v) biomass/acid ratio and sulfuric acid at 3.5% (v/v), whereas the maximum conversion yield (12.86 g/100 g; R² = 0.876) was obtained using 9.3% (w/v) biomass/acid ratio, maintaining the other parameters. Model outputs indicate that the biomass/acid ratio and time are the most influential parameters on the sugar concentration and yield models, respectively. The study allowed to obtain a predictive model that is very well adjusted to the experimental data to find the best saccharification conditions for the Aurantiochytrium sp. microalgae.

Lipid Droplets from Plants and Microalgae: Characteristics, Extractions, and Applications

Plant and algal LDs are gaining popularity as a promising non-chemical technology for the production of lipids and oils. In general, these organelles are composed of a neutral lipid core surrounded by a phospholipid monolayer and various surface-associated proteins. Many studies have shown that LDs are involved in numerous biological processes such as lipid trafficking and signaling, membrane remodeling, and intercellular organelle communications. To fully exploit the potential of LDs for scientific research and commercial applications, it is important to develop suitable extraction processes that preserve their properties and functions. However, research on LD extraction strategies is limited. This review first describes recent progress in understanding the characteristics of LDs, and then systematically introduces LD extraction strategies. Finally, the potential functions and applications of LDs in various fields are discussed. Overall, this review provides valuable insights into the properties and functions of LDs, as well as potential approaches for their extraction and utilization. It is hoped that these findings will inspire further research and innovation in the field of LD-based technology.

Glucose Conversion for Biobutanol Production from Fresh Chlorella sorokiniana via Direct Enzymatic Hydrolysis

Microalgae, which accumulate considerable carbohydrates, are a potential source of glucose for biofuel fermentation. In this study, we investigated the enzymatic hydrolysis efficiency of wet microalgal biomass compared with freeze-dried and oven-dried biomasses, both with and without an acidic pretreatment. With the dilute sulfuric acid pretreatment followed by amy (α-amylase and amyloglucosidase) and cellulase hydrolysis, approximately 95.4% of the glucose was recovered; however, 88.5% was released by the pretreatment with 2% (w/v) sulfuric acid, which indicates the potential of the acids for direct saccharification process. There were no considerable differences in the glucose yields among the three kinds of materials. In the direct amy hydrolysis without any pretreatment, a 78.7% glucose yield was obtained, and the addition of cellulase had no significant effect on the hydrolysis to glucose. Compared with the oven-dried biomass, the wet biomass produced a substantially higher glucose yield, which is possibly because the cross-linked cells of the oven-dried biomass prevented the accessibility of the enzymes. According to the results, the fresh microalgal biomass without cell disruption can be directly used for enzymatic hydrolysis to produce glucose. The enzymatic hydrolysate of the wet microalgal biomass was successfully used for acetone–butanol–ethanol (ABE) fermentation, which produced 7.2 g/L of ABE, indicating the application potential of wet microalgae in the bioalcohol fuel fermentation process.

Production and use of Scenedesmus acuminatus biomass in synthetic municipal wastewater for integrated biorefineries

Bioethanol production from algal biomass is a promising alternative for sustainable biofuel production. Algae possess a high photosynthetic capacity and an adaptive ability to thrive under harsh environmental conditions. The potential properties of Scenedesmus acuminatus CCALA 436 were assessed in this research for its bioethanol efficiency, and the effects of growing the algae in wastewater and at different concentrations of mepiquat chloride were studied. Also, pre-treatment efficiencies of different concentrations of calcium oxide were carried out on microalgae biomass. Superoxide dismutase, catalase activity, glutathione, and malondialdehyde contents of microalgae were examined, and the changes in chlorophyll, photoprotective carotenoid contents, and protein concentrations were determined. The results revealed that the maximum sugar and ethanol contents of Scenedesmus acuminatus CCALA 436 were 44.7 ± 1.5% and 20.32 g/L, respectively, for 50% wastewater and mepiquat chloride (2.5 mg/L) after pre-treatment with calcium oxide (0.08%). Additionally, the levels of oxidative enzymes varied depending on the wastewater concentrations. These findings indicate Scenedesmus acuminatus CCALA 436 grown in wastewater and mepiquat chloride can be used for the treatment of wastewater and the production of ethanol and high-value products such as carotenoid.

A semi-continuous algal-bacterial wastewater treatment process coupled with bioethanol production

Harnessing the biomass energy potential through biofuel production offers new outlets for a circular economy. In this study an integrated system which combine brewery wastewater treatment using algal-bacterial aggregates instead of activated sludge was developed. The use of algal-bacterial aggregates can eliminate the aeration requirements and significantly reduce the high biomass harvesting costs associated with algal monocultures. A sequencing batch reactor (SBR) setup operating with and without biomass recirculation was used to investigate pollutant removal rates, aggregation capacity and microbial community characteristics under a range of hydraulic retention times (HRTs) and solid retention times (SRTs). It was observed that biomass recirculation strategy significantly enhanced aggregation and pollutant removal (i.e., 78.7%, 94.2% and 75.2% for d-COD, TKN, and PO₄^3--P, respectively). The microbial community established was highly diverse consisting of 161 Bacterial Operational Taxonomic Units (B-OTUs) and 16 unicellular Eukaryotic OTUs (E-OTUs). Escalation the optimal conditions (i.e., HRT = 4 d, SRT = 10 d) at pilot-scale resulted in nutrient starvation leading to 38-44% w/w carbohydrate accumulation. The harvested biomass was converted to bioethanol after acid hydrolysis followed by fermentation with Saccharomyces cerevisiae achieving a bioethanol production yield of 0.076 g bioethanol/g biomass. These data suggest that bioethanol production coupled with high-performance wastewater treatment using algal-bacterial aggregates is feasible, albeit less productive concerning bioethanol yields than systems exclusively designed for third and fourth-generation biofuel production.

Transformation of Enzymatic Hydrolysates of Chlorella–Fungus Mixed Biomass into Poly(hydroxyalkanoates)

The production of poly(hydroxylalkanoates) (PHA) is limited by the high cost of the feedstock since various biomass wastes look attractive as possible sources for polymer production. The originality of this present study is in the biotransformation of mixed Chlorella-based substrates into PHAs. The synthetic potential of Cupriavidus necator B8619 cells was studied during the bioconversion of algae biomass in mixtures with spent immobilized mycelium of different fungi (genus Rhizopus and Aspergillus) into PHAs. The biomass of both microalgae Chlorella and fungus cells was accumulated due to the use of the microorganisms in the processes of food wastewater treatment. The biosorption of Chlorella cells by fungal mycelium was carried out to obtain mixed biomass samples (the best ratio of “microalgae:fungi” was 2:1) to convert them by C. necator B8619 into the PHA. The influence of conditions used for the pretreatment of microalgae and mixed types of biomass on their conversion to PHA was estimated. It was found that the maximum yield of reducing sugars (39.4 ± 1.8 g/L) can be obtained from the mechanical destruction of cells by using further enzymatic hydrolysis. The effective use of the enzymatic complex was revealed for the hydrolytic disintegration of treated biomass. The rate of the conversion of mixed substrates into the biopolymer (440 ± 13 mg/L/h) appeared significantly higher compared to similar known examples of complex substrates used for C. necator cells.

Revalorization of Microalgae Biomass for Synergistic Interaction and Sustainable Applications: Bioplastic Generation

Microalgae and cyanobacteria are photosynthetic microorganisms' sources of renewable biomass that can be used for bioplastic production. These microorganisms have high growth rates, and contrary to other feedstocks, such as land crops, they do not require arable land. In addition, they can be used as feedstock for bioplastic production while not competing with food sources (e.g., corn, wheat, and soy protein). In this study, we review the macromolecules from microalgae and cyanobacteria that can serve for the production of bioplastics, including starch and glycogen, polyhydroxyalkanoates (PHAs), cellulose, polylactic acid (PLA), and triacylglycerols (TAGs). In addition, we focus on the cultivation of microalgae and cyanobacteria for wastewater treatment. This approach would allow reducing nutrient supply for biomass production while treating wastewater. Thus, the combination of wastewater treatment and the production of biomass that can serve as feedstock for bioplastic production is discussed. The comprehensive information provided in this communication would expand the scope of interdisciplinary and translational research.

Municipal Landfill Leachate Treatment and Sustainable Ethanol Production: A Biogreen Technology Approach

Sustainable material sources are an important agenda to protect the environment and to meet human needs. In this study, Scenedesmus sp. was used to treat municipal landfill leachate via batch and continuous cultivation modes to protect the environment and explore sufficient biomass production for bioethanol production using Saccharomyces cerevisiae. Physicochemical characteristics of leachate were determined for the phases before, during, and after the process. Batch and continuous cultivation were used to treat raw leachate to determine optimum conditions for treatment. Then, the biomass of Scenedesmus sp. with and without sonication was used as a substrate for ethanol production. Sonication was carried out for biomass cell disruption for 20 min at a frequency of 40 kHz. Through batch cultivation mode, it was found that pH 7 was the optimum condition for leachate treatment. Continuous cultivation mode had the highest removal values for COD, phosphorus, and carbohydrate, namely 82.81%, 79.70%, and 84.35%, respectively, among other modes. As for ethanol production, biomass without sonication with 9.026 mg·L⁻¹ ethanol, a biomass concentration of 3.300 µg·L⁻¹, and pH 5 were higher than biomass with sonication with 5.562 mg·L⁻¹ ethanol, a biomass concentration of 0.110 µg·L⁻¹, and pH 5. Therefore, it is evident that the leachate has the potential to be treated by Scenedesmus sp. and converted to bioethanol in line with the concept of sustainable materials.

Bioethanol production from defatted biomass of Nannochloropsis oculata microalgae grown under mixotrophic conditions

In order to improve the economic feasibility and environmental sustainability of microalgal bioethanol production, a nontoxic, copious agricultural waste, sugarcane bagasse aqueous extract (SBAE) was used for cultivating Nannochloropsis oculata microalga (NNO-1 UTEX Culture LB 2164) as potential sources of substitutes for traditional nutrition to reduce the costs in cultivation through acid digestion and enzymatic treatment before being fermented by Saccharomyces cerevisiae (NRRLY-2034). The primary target of this research was to find out the ethanol from hydrolysate of the defatted biomass of N. oculata grown mixotrophically on SBAE and CO₂ as carbon sources. For acid hydrolysis (AH), the highest carbohydrate yield 252.84 mg/g DW has been obtained with 5.0% (v/v) H₂SO₄ at 121 °C for 15 min for defatted biomass cultivated mixotrophically on sugarcane bagasse aqueous extract (SBAE) regarding 207.41 mg/g DW for defatted biomass cultivated autotrophically (control treatment). Whereas, the highest levels of reducing sugars has been obtained with 4.0% (v/v) H₂SO₄ 157.47±1.60 mg/g DW for defatted biomass cultivated mixotrophically compared with 135.30 mg/g DW for the defatted control treatment. The combination of acid hydrolysis 2.0% (v/v) H₂SO₄ followed by enzymatic treatment (AEH) increased the carbohydrate yields to 268.53 mg/g DW for defatted biomass cultivated mixotrophically on SBAE regarding 177.73 mg/g DW for the defatted control treatment. However, the highest levels of reducing sugars have been obtained with 3.0% (v/v) H₂SO₄ followed by enzyme treatment that gave 232.39±1.77 for defatted biomass cultivated mixotrophically on SBAE and 150.75 mg/g DW for the defatted control treatment. The sugar composition of the polysaccharides showed that glucose was the principal polysaccharide sugar (60.7-62.49%) of N. oculata defatted biomass. Fermentation of the hydrolysates by Saccharomyces cerevisiae for the acid pretreated defatted biomass samples gave ethanol yield of 0.86 g/L (0.062 g/g sugar consumed) for control and 1.17 g/L (0.069 g/g sugar consumed) for SBAE mixotrophic. Whereas, the maximum ethanol yield of 6.17±0.47 g/L (0.26±0.11 g/g sugar consumed) has been obtained with samples from defatted biomass grown mixotrophically (SBAE mixotrophic) pretreated with acid coupled enzyme hydrolysis.

Microalgae-based carbohydrates: A green innovative source of bioenergy

Microalgae contribute significantly to the global carbon cycle through photosynthesis. Given their ability to efficiently convert solar energy and atmospheric carbon dioxide into chemical compounds, such as carbohydrates, and generate oxygen during the process, microalgae represent an excellent and feasible carbohydrate bioresource. Microalgae-based biofuels are technically viable and, delineate a green and innovative field of opportunity for bioenergy exploitation. Microalgal polysaccharides are one of the most versatile groups for biotechnological applications and its content can be increased by manipulating cultivation conditions. Microalgal carbohydrates can be used to produce a variety of biofuels, including bioethanol, biobutanol, biomethane, and biohydrogen. This review provides an overview of microalgal carbohydrates, focusing on their use as feedstock for biofuel production, highlighting the carbohydrate metabolism and approaches for their enhancement. Moreover, biofuels produced from microalgal carbohydrate are showed, in addition to a new bibliometric study of current literature on microalgal carbohydrates and their use.

Microalgal Systems for Wastewater Treatment: Technological Trends and Challenges towards Waste Recovery

Wastewater (WW) treatment using microalgae has become a growing trend due the economic and environmental benefits of the process. As microalgae need CO2, nitrogen, and phosphorus to grow, they remove these potential pollutants from wastewaters, making them able to replace energetically expensive treatment steps in conventional WW treatment. Unlike traditional sludge, biomass can be used to produce biofuels, biofertilizers, high value chemicals, and even next-generation growth media for “organically” grown microalgal biomass targeting zero-waste policies and contributing to a more sustainable circular bioeconomy. The main challenge in this technology is the techno-economic feasibility of the system. Alternatives such as the isolation of novel strains, the use of native consortia, and the design of new bioreactors have been studied to overcome this and aid the scale-up of microalgal systems. This review focuses on the treatment of urban, industrial, and agricultural wastewaters by microalgae and their ability to not only remove, but also promote the reuse, of those pollutants. Opportunities and future prospects are discussed, including the upgrading of the produced biomass into valuable compounds, mainly biofuels.

Strategies and advances in the pretreatment of microalgal biomass

Modification of structural components, especially the cell wall, through adequate pretreatment strategies is critical to the bioconversion efficiency of algal biomass to biorefinery products. Over the years, several physical, physicochemical, chemical and green pretreatment methods have been developed to achieve maximum productivity of desirable by-products to sustain a circular bioeconomy. The effectiveness of the pretreatment methods is however, species specific due to diversity in the innate nature of the microalgal cell wall. This review provides a comprehensive overview of the most notable and promising pretreatment strategies for several microalgae species. Methods including the application of stress, ultrasound, electromagnetic fields, pressure, heat as well as chemical solvents (ionic liquids, supercritical fluids, deep eutectic solvents etc.) have been detailed and analyzed. Enzyme and hydrolytic microorganism based green pretreatment methods have also been reviewed. Metabolic engineering of microorganisms for product specificity and lower inhibitors can be a future breakthrough in microalgal pretreatment.

A review on cyanobacteria cultivation for carbohydrate-based biofuels: Cultivation aspects, polysaccharides accumulation strategies, and biofuels production scenarios

Cyanobacterial biomass has constituted a crucial third and fourth-generation biofuel material, with great potential to synthesize a wide range of metabolites, mainly carbohydrates. Lately, carbohydrate-based biofuels from cyanobacteria, such as bioethanol, biohydrogen, and biobutanol, have attracted attention as a sustainable alternative to petroleum-based products. Cyanobacteria can perform a simple process of saccharification, and extracted carbohydrates can be converted into biofuels with two alternatives; the first one consists of a fermentative process based on bacteria or yeasts, while the second alternative consists of an internal metabolic process of their own in intracellular carbohydrate content, either by the natural or genetic engineered process. This study reviewed carbohydrate-enriched cyanobacterial biomass as feedstock for biofuels. Detailed insights on technical strategies and limitations of cultivation, polysaccharide accumulation strategies for further fermentation process were provided. Advances and challenges in bioethanol, biohydrogen, and biobutanol production by cyanobacteria synthesis and an independent fermentative process are presented. Critical outlook on life-cycle assessment and techno-economical aspects for large-scale application of these technologies were discussed.

Insights into diatom microalgal farming for treatment of wastewater and pretreatment of algal cells by ultrasonication for value creation

Wastewater management and its treatment have revolutionized the industry sector into many innovative techniques. However, the cost of recycling via chemical treatment has major issues especially in economically poor sectors. On the offset, one of the most viable and economical techniques to clean wastewater is by growing microalgae in it. Since wastewater is rich in nitrates, phosphates and other trace elements, the environment is suitable for the growth of microalgae. On the other side, the cost of harvesting microalgae for its secondary metabolites is burgeoning. While simultaneously growing of microalgae in photobioreactors requires regular feeding of the nutrients and maintenance which increases the cost of operation and hence cost of its end products. The growth of microalgae in waste waters makes the process not only economical but they also manufacture more amounts of value added products. However, harvesting of these values added products is still a cumbersome task. On the offset, it has been observed that pretreating the microalgal biomass with ultrasonication allows easy oozing of the secondary metabolites like oil, proteins, carbohydrates and methane at much lower cost than that required for their extraction. Among microalgae diatoms are more robust and have immense crude oil and are rich in various value added products. However, due to their thick silica walls they do not ooze the metabolites until the mechanical force on their walls reaches certain threshold energy. In this review recycling of wastewater using microalgae and its pretreatment via ultrasonication with special reference to diatoms is critically discussed. Perspectives on circular bioeconomy and knowledge gaps for employing microalgae to recycle wastewater have been comprehensively narrated.

Optimization of microwave-assisted carbohydrate extraction from indigenous Scenedesmus sp. grown in brewery effluent using response surface methodology

The use of wastewater as a nutrient source for microalgae cultivation is considered as a cost-effective approach for algal biomass and biofuel production. The microalgal biomass contains carbohydrates that can be processed into bioethanol through different extraction methods. The objective of this study is to optimize the microwave-assisted extraction (MAE) of carbohydrates from the indigenous Scenedesmus sp. grown on brewery effluent. Optimization of independent variables, such as acid concentration (0.1–5 N), microwave power (800–1200 W), temperature (80–180 °C) and extraction time (5–30 min) performed by response surface methodology. It was found that all independent variables had a significant and positive effect on microwave-assisted carbohydrate extraction. The quadratic model developed on the basis of carbohydrate yield had F value of 112.05 with P < 0.05, indicating that the model was significant to predict the carbohydrate yield. The model had a high value of R² (0.9899) and adjusted R² (0.9811), indicating that the fitted model displayed a good agreement between the predicted and actual carbohydrate yield. An optimum carbohydrate yield obtained was 260.54 mg g⁻¹ under the optimum conditions of acid concentration (2.8 N), microwave power (1075 W), temperature (151 °C) and extraction time (22 min). The validation test showed that the model has adequately described the microwave-assisted extraction (MAE) of carbohydrates from microalgal biomass. This study demonstrated that the indigenous Scenedesmus sp. grown on brewery effluent provides a promising result in carbohydrate production for bioethanol feedstock.

Aquaculture wastewater treatment through microalgal. Biomass potential applications on animal feed, agriculture, and energy

The use of microalgae to remediate raw effluent from brown crab aquaculture was evaluated by performing batch mode growth tests using separately the microalgae Chlorella vulgaris (Cv), Scenedesmus obliquus (Sc), Isochrysis galbana (Ig), Nannocloropsis salina (Ns), and Spirulina major (Sp). Removal efficiencies in batch growth were 100% for total nitrogen and total phosphorus for all microalgae. Chemical oxygen demand (COD) remediations were all above 72%. Biomass productivity varied from 20.9 mg L^-1 day^-1 (N. salina) to 146.4 mg L^-1 day^-1 (C. vulgaris). The two best performing algae were C. vulgaris and S. obliquus and they were tested in semi-continuous growth, reaching productivities of 879.8 mg L^-1 day^-1 and 811.7 mg L^-1 day^-1, respectively. The bioremediation of the effluent was tested with a transfer system consisting of three independent containers and compared with the use of a single container. The single container had the same capacity and received weekly the same volume of effluent as the three containers together. The remediation capacity of the 3 containers was much higher than the single one. The supplementation with NaNO₃ was tested to improve the nutrient removal microalgae' capacity, with positive results. The removal efficiencies were 100% for total nitrogen and total phosphorus and higher than 96% for COD. The obtained C. vulgaris and S. obliquus biomass were composed of 31 and 35% proteins, 6 and 8% lipids, 39 and 30% carbohydrates, respectively. The composition of these biomass suggest that it can be used as novel and sustainable ingredients in aquaculture feeds. The algal biomass of Cv and Sc were used as biostimulants in the germination of wheat and watercress, and very promising results were attained, with increases in the germination index for Cv and Sc of 175% and 48% in watercress and 84% and 98% in wheat, respectively. The biomasses of Cv and Sc were also subjected to a torrefaction process with 72.5 ± 1.7% char yields. The obtained biochars were tested as biostimulants for germination seeds (wheat and watercress) and as bio-adsorbent of dye solutions.

Bioprospecting of wild type ethanologenic yeast for ethanol fuel production from wastewater-grown microalgae

BACKGROUND

Wild-type yeasts have been successfully used to obtain food products, yet their full potential as fermenting microorganisms for large-scale ethanol fuel production has to be determined. In this study, wild-type ethanologenic yeasts isolated from a secondary effluent were assessed for their capability to ferment saccharified microalgae sugars.

RESULTS

Yeast species in wastewater were identified sequencing the Internal Transcribed Spacers 1 and 2 regions of the ribosomal cluster. Concurrently, microalgae biomass sugars were saccharified via acid hydrolysis, producing 5.0 ± 0.3 g L^-1 of fermentable sugars. Glucose consumption and ethanol production of yeasts in hydrolyzed-microalgae liquor were tested at different initial sugar concentrations and fermentation time. The predominant ethanologenic yeast species was identified as Candida sp., and glucose consumption for this strain and S. cerevisiae achieved 75% and 87% of the initial concentration at optimal conditions, respectively. Relatively similar ethanol yields were determined for both species, achieving 0.45 ± 0.05 (S. cerevisiae) and 0.46 ± 0.05 g ethanol per g glucose (Candida sp.).

CONCLUSION

Overall, the results provide a first insight of the fermentation capacities of specific wild-type Candida species, and their potential role in ethanol industries seeking to improve their cost-efficiency.

Evaluation of pretreatments for solubilisation of components and recovery of fermentable monosaccharides from microalgae biomass grown in piggery wastewater

Microalgae-bacteria biomass cultured in wastewater is an interesting renewable material capable of metabolising nutrients from wastes into carbohydrates, proteins, and lipids through photosynthesis. Despite the interest in the valorisation of this biomass to improve the viability of microalgae-based wastewater treatment processes, very scarce research has been devoted to the fractional recovery of its components. This work evaluates the effect of different pretreatments coupled with enzymatic hydrolysis on the solubilisation of biomass components and on the recovery of fermentable monosaccharides (glucose and xylose) from Scenedesmaceae based biomass grown in a thin layer reactor feed with piggery wastewater. Chemical pretreatments generated high concentrations of byproducts, mainly organic acids. No bacterial DNA was found in these pretreated biomasses. The acid pretreatment provided the highest carbohydrate solubilisation (98%) and monosaccharide recovery (81%). Enzymatic hydrolysis coupled with alkaline NaOH 2 M pretreatment achieved almost complete solubilisation of the biomass components, but high carbohydrate losses. Physical pretreatments remarkably increased the solubilisation of the biomass components during the enzymatic hydrolysis step, especially bead milling, which achieved solubilisation yields of 83% of carbohydrates, 43% of proteins, and 60% of lipids. The presence of viable bacteria in these pretreated biomasses could be related to the high carbohydrate losses and the generation of methanol and ethanol in addition to organic acids as byproducts.

Improvement of ethanol production using green alga Chlorococcum minutum

Incessant depletion of fossil fuels urges the governments and non-governmental organizations to invest more on renewable energy sectors including generation of biofuels such as bioethanol. Production of ethanol from algal feedstock has been an interesting area of research in recent times. In the present investigation, feedstock of a green alga Chlorococcum minutum was selected for ethanol production and compared with feedstock of model alga Chlamydomonas reinhardtii. Both the species were grown under in vitro conditions using universal tris-acetate-phosphate (TAP) medium with various concentrations and combinations of vitamins such as thiamin, biotin and cobalamin (B1, B7 and B12) to enhance the biomass in turn reducing sugars in both the algal cultures. Later, these algal feedstocks were used for the production of ethanol under fermentation conditions using yeast. Reducing sugars were more in both the algal cultures grown in Cr3 or Cm3 media (TAP with 0.8 g/L of B1, 0.004 g/L of B7 & 0.004 g/L of B12) and also in Cr2 or Cm2 media (TAP with 0.4 g/L of B1, 0.002 g/L of B7 & 0.002 g/L of B12). In extent, the enhancement of ethanol production was noticed in C. reinhardtii (33.57 g/L) and C. minutum (46.97 g/L) from the feedstocks grown in Cr3 or Cm3 media when compared with feedstocks grown in other vitamin combinations or without vitamin assistance. Specifically, feedstock of C. minutum generated more output at 48 h when compared with model alga. The present work may be useful for the production of ethanol at a commercial level.

Utilization of Biomass Derived from Cyanobacteria-Based Agro-Industrial Wastewater Treatment and Raisin Residue Extract for Bioethanol Production

Biofuels produced from photosynthetic microorganisms such as microalgae and cyanobacteria could potentially replace fossil fuels as they offer several advantages over fuels produced from lignocellulosic biomass. In this study, energy production potential in the form of bioethanol was examined using different biomasses derived from the growth of a cyanobacteria-based microbial consortium on a chemical medium and on agro-industrial wastewaters (i.e., dairy wastewater, winery wastewater and mixed winery–raisin effluent) supplemented with a raisin residue extract. The possibility of recovering fermentable sugars from a microbial biomass dominated by the filamentous cyanobacterium Leptolynbgya sp. was demonstrated. Of the different acid hydrolysis conditions tested, the best results were obtained with sulfuric acid 2.5 N for 120 min using dried biomass from dairy wastewater and mixed winery–raisin wastewaters. After optimizing sugar release from the microbial biomass by applying acid hydrolysis, alcoholic fermentation was performed using the yeast Saccharomyces cerevisiae. Raisin residue extract was added to the treated biomass broth in all experiments to enhance ethanol production. Results showed that up to 85.9% of the theoretical ethanol yield was achieved, indicating the potential use of cyanobacteria-based biomass in combination with a raisin residue extract as feedstock for bioethanol production.

A comprehensive review on the application of novel disruption techniques for proteins release from microalgae

There is an emergent demand for sustainable and alternative protein sources such as insects and microorganisms that meet the nutritional requirements. Microalgae possess valuable substances that could satisfy the population's dietary requirement, medicinal purpose, and energy, aligned with effective processing techniques. Several disruption techniques were applied to microalgae species for protein recovery and other compounds. The thick microalgae cell wall makes it difficult to recover all the valuable biomolecules through several downstream processes. Thus, forethought key factors need to be considered when choosing a cell lysis method. The most challenging and crucial issue is selecting a technique that requires consideration of their ability to disrupt all cell types, easy to use, purity degree, reproducible, scalable, and energy efficient. This review aims to provide useful information specifically on mechanical and non-mechanical disruption methods, the status and potential in protein extraction capacities, and constraints. Therefore, further attention in the future on potential technologies, namely explosive decompression, microfluidization, pulsed arc technology, is required to supplement the discussed techniques. This article summarizes recent advances in cell disruption methods and demonstrates insights on new directions of the techniques and future developments.

Pilot scale wastewater treatment, CO2 sequestration and lipid production using microalga, Neochloris aquatica RDS02

In present investigation carried out large-scale treatment of tannery effluent by the cultivation of microalgae, Neochloris aquatica RDS02. The tannery effluent treatment revealed that significant reduction heavy metals were chromium-3.59, lead-2.85, nickel-1.9, cadmium-10.68, zinc-4.49, copper-0.95 and cobalt-1.86 mg/L on 15th day of treatment using N. aquatica RDS02. The microalgal biosorption capacity q _max rate was Cr-88.66, Pb-75.87, Ni-87.61, Cd-60.44, Co-52.86, Zn-84.90 and Cu-54.39, and isotherm model emphasized that the higher R ² value 0.99 by Langmuir and Freundlich kinetics model. The microalga utilized highest CO₂ (90%) analyzed by CO₂ biofixation and utilization kinetics, biomass (3.9 mg/mL), lipid (210 mg mL^-1), carbohydrate (102.75 mg mL^-1), biodiesel (4.9 mL g^-1) and bioethanol (4.1 mL g^-1). The microalgal-lipid content was analyzed through Nile red staining. Gas chromatography mass spectrometric (GCMS) analysis confirmed that the presence of a biodiesel and major fatty acid methyl ester (FAME) profiling viz., tridecanoic acid methyl ester, pentadecanoic acid methyl ester, octadecanoic acid methyl ester, myristic acid methyl ester, palmitic acid methyl ester and oleic acid methyl ester. Fourier transform infrared (FTIR) analysis confirmed that the presence of a functional groups viz., phenols, alcohols, alkynes, carboxylic acids, ketones, carbonyl and ester groups. The bioethanol production was confirmed by high-performance liquid chromatography (HPLC) analyze.

Enhanced lipid extraction from the biodiesel-producing microalga Chlorella pyrenoidosa cultivated in municipal wastewater via Daphnia ingestion and digestion

Herein, a novel innovative lipid co-extraction strategy using the biodiesel-producing microalga Chlorella pyrenoidosa and planktonic cladoceran Daphnia was proposed. Co-extraction occurred as Daphnia ingested and digested microalgal cells in a pre-treatment process; thereafter, lipids from these organisms were extracted. Composition of fatty acids from C. pyrenoidosa and Daphnia were appropriate as potential biodiesel feedstocks. Daphnia had different absorption and conversion capacities of various fatty acids from C. pyrenoidosa, which showed potential for improving biodiesel characteristics. Linoleic acid (LA, C18:2n-6) and alpha-linolenic acid (ALA, C18:3n-3) were absorbed significantly into the body of Daphnia. The optimal lipid extraction and fatty acid methyl esters (FAMEs) recovery rates were up to 41.08% and 12.35%, respectively, which were greater than that of the traditional lipid extraction method due to the rich oil content of Daphnia. Overall, this lipid co-extraction process serves a potential Daphnia utilization as an economical, green, low-energy way for microalgae biodiesel production.

Algae as potential feedstock for the production of biofuels and value-added products: Opportunities and challenges

The current review explores the potential application of algal biomass for the production of biofuels and bio-based products. The variety of processes and pathways through which bio-valorization of algal biomass can be performed are described in this review. Various lipid extraction techniques from algal biomass along with transesterification reactions for biodiesel production are briefly discussed. Processes such as the pretreatment and saccharification of algal biomass, fermentation, gasification, pyrolysis, hydrothermal liquefaction, and anaerobic digestion for the production of biohydrogen, bio-oils, biomethane, biochar (BC), and various bio-based products are reviewed in detail. The biorefinery model and its collaborative approach with various processes are highlighted for the production of eco-friendly, sustainable, and cost-effective biofuels and value-added products. The authors also discuss opportunities and challenges related to bio-valorization of algal biomass and use their own perspective regarding the processes involved in production and the feasibility to make algal research a reality for the production of biofuels and bio-based products in a sustainable manner.

Intensified recovery of lipids, proteins, and carbohydrates from wastewater-grown microalgae Desmodesmus sp. by using ultrasound or ozone

This study evaluates the effect of ultrasound and ozone pretreatments for the subsequent recovery of Desmodesmus sp. biocomponents-lipids, proteins, and carbohydrates-using a response surface methodology. Both pretreatments impact on the recovered lipids quality, solvent waste production and extraction time is analysed for process intensification purposes. For ultrasound pretreatment, independent parameters were energy applied (50-200 kWh/kg dry biomass), biomass concentration (25-75 g/L), and ultrasonic intensity (0.32 and 0.53 W/mL). While for ozone pretreatment, independent parameters were ozone concentration (3-9 mg O₃/L), biomass concentration (25-75 g/L), and contact time (5-15 min). In the case of ultrasound pretreatment, recovery yield reached 97 ± 0.4%, 89 ± 3%, and 73 ± 0.6% for proteins, carbohydrates and lipids respectively. Given process required: energy applied of 50 kWh/kg dry biomass, 75 g/L of biomass concentration, 0.32 W/mL of ultrasonic intensity, and 56 min of time process. Ultrasound caused high cell disruption releasing all proteins, thereby obviating downstream processing for its recovery. Ozone pretreatment recovery yield was 85 ± 2%, 48 ± 1.4%, and 25 ± 1.3%, for carbohydrates, lipids and proteins respectively, under the following conditions: 9 mg O₃/L of ozone concentration, 25 g/L of biomass concentration, and 5 min of contact time that depicts an energy consumption of 30.64 kWh/kg dry biomass. It was found that ultrasound and ozone pretreatments intensified the lysis and biocomponents recovery process by reducing solvent consumption by at least 92% and extraction time between 80% and 90% compared with extraction of untreated biomass biocomponents. Both pretreatments improve the composition of the recovered lipids. It was noted that the yield of neutral lipids increased from 28% to 67% for ultrasound pretreatment while for ozone pretreatment from 49% to 63%. The method used for lipid extraction may also have an effect but here it was kept constant.

Structural insights reveal the effective Spirulina platensis cell wall dissociation methods for multi-output recovery

In this work, Spirulina platensis cells harvested in the exponential and equilibrium phases with intact and broken cell walls were treated through a set of alkaline or acidic conditions including alkalis and acids, with solutions of pH 0.0-14.0. The effective Spirulina platensis cell wall dissociation methods for multi-output recovery were obtained. SEM and FTIR were applied to characterize the alkaline and acid treatment details, and Spirulina platensis cell wall dissociation mechanisms, via attacks by OH^- or H⁺, were then proposed. Overall, this study highlights the synthesized multi-output algal product in an integrated strategy with ultracellular structural insight and is valuable for understanding the specific roles of attack ions.

Synergy of biofuel production with waste remediation along with value-added co-products recovery through microalgae cultivation: A review of membrane-integrated green approach

Development of advanced biofuels such as bioethanol and biodiesel from renewable resources is critical for the earth's sustainable management and to slow down the global climate change by partial replacement of gasoline and diesel in the transport sector. Being a diverse group of aquatic micro-organisms, algae are the most prominent resources on the planet, distributed in an aquatic system, a potential source of bioenergy, biomass and secondary metabolites. Microalgae-based biofuel production is widely accepted as non-food fuel sources and better choice for achieving goals of incorporation of a clean fuel source into the transportation sector. The present review article provides a comprehensive literature survey as well as a novel approach on the application of microalgae for their simultaneous cultivation and bioremediation of high nutrient containing wastewater. In addition to that, merits and demerits of different existing conventional techniques for microalgae culture reactors, harvesting of algal biomass, oil recovery, use of different catalysts for transesterification reactions and other by-products recovery have been discussed and compared with the membrane-based system to find out the best optimal conditions for higher biomass as well as lipid yield. This article also deals with the use of a tailor-made membrane in an appropriate module that can be used in upstream and downstream processes during algal-based biofuels production. Such membrane-integrated system has the potential of low-cost and eco-friendly separation, purification and concentration enrichment of biodiesel as well as other valuable algal by-products which can bring the high degree of process intensification for scale-up at the industrial stage.

Algal biorefinery models with self-sustainable closed loop approach: Trends and prospective for blue-bioeconomy

Microalgae due to its metabolic versatility have received a focal attention in the biorefinery and bioeconomy context. Microalgae products have broad and promising application potential in the domain of renewable fuels/energy, nutraceutical, pharmaceuticals and cosmetics. Biorefining of microalgal biomass in a circular loop with an aim to maximize resource recovery is being considered as one of the sustainable option that will have both economical and environmental viability. The expansive scope of microalgae cultivation with self-sustainability approach was discussed in this communication in the framework of blue-bioeconomy. Microalgae based primary products, cultivation strategies, valorization of microalgae biomass for secondary products and integrated biorefinery models for the production of multi-based products were discussed. The need and prospect of self-sustainable models in closed loop format was also elaborated.

Co-production of biodiesel and bioethanol using psychrophilic microalga Chlamydomonas sp. KNM0029C isolated from Arctic sea ice

BACKGROUND

Biofuels, generated using microalgae as sustainable energy, have received a lot of attention. Microalgae can be cultivated at low cost with CO₂ and solar energy without competition from edible crops. Psychrophilic microalgae can be a suitable feedstock to produce biofuels without the environmental constraints of low temperatures, because they can grow below 10 °C. However, there is a lack of efficient strategies using psychrophilic microalgae to produce biodiesel and bioethanol. Therefore, the current study aimed to optimize the production of biodiesel and bioethanol from Arctic Chlamydomonas sp. KNM0029C at low temperatures.

RESULTS

After incubation in a 20-L photobioreactor, fatty acid methyl ester (FAME) was extracted using modified FAME extraction methods, producing a maximum yield of 0.16-g FAME/g KNM0029C. Residual biomass was pretreated for bioethanol production, and the yields from different methods were compared. The highest bioethanol yield (0.22-g/g residual biomass) was obtained by pretreatment with enzyme (amyloglucosidase) after sonication. Approximately 300-mg biofuel was obtained, including 156-mg FAME biodiesel and 144-mg bioethanol per g dried cells, representing the highest recorded yield from psychrophilic microalgae.

CONCLUSIONS

This is the first to attempt at utilizing biomass from psychrophilic Arctic microalga Chlamydomonas sp. KNM0029C for the co-production of bioethanol and biodiesel, and it yielded the highest values among reported studies using psychrophilic organisms. These results can be used as a source for the efficient biofuel production using polar microalgae.

Process optimization for the production of high-concentration ethanol with Scenedesmus raciborskii biomass

Scenedesmus raciborskii WZKMT was subjected to fed-batch enzymatic hydrolysis and fermentation to facilitate the saccharification of high-solid-loading substrate for high-concentration ethanol. In this work, process factors affecting enzymatic hydrolysis, including enzyme loading, temperature, pH, and solid loading, were optimized. Results showed that 58.03 g L^-1 glucose, 12.57 g L^-1 xylose, and 1.45 g L^-1 cellobiose were obtained after the enzymatic hydrolysis of 330 g L^-1 substrates under the optimal conditions of 30 FPU g^-1 enzyme loading, 50 °C, and pH 5.5. Meanwhile, 89.60% yield and 30.43 g L^-1 content of ethanol were obtained after the fermentation of 330 g L^-1 hydrolysate. The maximum ethanol concentration of 79.38 g L^-1 could be achieved through repeated fed-batch process, indicating that S. raciborskii WZKMT is a promising feedstock for ethanol production.

Algae biorefinery: Review on a broad spectrum of downstream processes and products

Algae biomass comprises variety of biochemicals components such as carbohydrates, lipids and protein, which make them a feasible feedstock for biofuel production. However, high production cost mainly due to algae cultivation remains the main challenge in commercializing algae biofuels. Hence, extraction of other high value-added bioproducts from algae biomass is necessary to enhance the economic feasibility of algae biofuel production. This paper is aims to deliberate the recent developments of conventional technologies for algae biofuels production, such as biochemical and chemical conversion pathways, and extraction of a variety of bioproducts from algae biomass for various potential applications. Besides, life cycle evaluation studies on microalgae biorefinery are presented, focusing on case studies for various cultivation techniques, culture medium, harvesting, and dewatering techniques along with biofuel and bioenergy production pathways. Overall, the algae biorefinery provides new opportunities for valorisation of algae biomass for multiple products synthesis.

Exploration of green integrated approach for effluent treatment through mass culture and biofuel production from unicellular alga, Acutodesmus obliquus RDS01

This study deals with the open pond (OP) pilot scale treatment of cassava effluent and enhancement of Ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) enzyme through CO₂ utilization by the microalga, Acutodesmus obliquus RDS01. The cassava effluent treatment (ET) revealed maximum reduction of ammonia (96.8%), calcium (94.6%), chloride (95.2%), chlorine (98.5%), inorganic phosphate (94.6%), magnesium (96.8%), nitrate (96.89%), organic carbon (95.9%), organic phosphorus (96.3%), potassium (97.9%), sodium (97.1%), and sulfate (95.4%) on 15^th day using A. obliquus. The microalga produced highest RuBisCO enzyme activity (90%), CO₂ utilization efficiency (95%), biomass (8.9 gL^-1), lipid (176.65 mg mL^-1), carbohydrate (96.78 mg mL^-1), biodiesel (4.1 mL g^-1), and bioethanol (3.7 mL g^-1) during OP treatment. The isolated RuBisCO gene (rbcL) was used to construct the protein model by homology modeling. The microalgal-lipid content was analyzed through thin layer chromatography, the biodiesel produced was analyzed using Fourier-transform infrared spectroscopy and gas chromatography mass spectrometry (GCMS). The bioethanol production was confirmed by high performance liquid chromatography and GCMS analyses. A. obliquus produced of 98.75% biodiesel and 96.83% bioethanol in the OP pilot scale treatment A. obliquus. Overall, the microalga A. obliquus could act as an effective CO₂ capturing and bioremediation agent in the cassava ET, and also for the biodiesel and bioethanol can be produced.

Improvement of hydrogen production from Chlorella sp. biomass by acid-thermal pretreatment

BACKGROUND

Owing to the high growth rate, high protein and carbohydrate contents, and an ability to grow autotrophically, microalgal biomass is regarded as a promising feedstock for fermentative hydrogen production. However, the rigid cell wall of microalgae impedes efficient hydrolysis of the biomass, resulting in low availability of assimilable nutrients and, consequently, low hydrogen production. Therefore, pretreatment of the biomass is necessary in order to achieve higher hydrogen yield (HY). In the present study, acid-thermal pretreatment of Chlorella sp. biomass was investigated. Conditions for the pretreatment, as well as those for hydrogen production from the pretreated biomass, were optimized. Acid pretreatment was also conducted for comparison.

RESULTS

Under optimum conditions (0.75% (v/v) H2SO4, 160 °C, 30 min, and 40 g-biomass/L), acid-thermal pretreatment yielded 151.8 mg-reducing-sugar/g-biomass. This was around 15 times that obtained from the acid pretreatment under optimum conditions (4% (v/v) H2SO4, 150 min, and 40 g-biomass/L). Fermentation of the acid-thermal pretreated biomass gave 1,079 mL-H2/L, with a HY of 54.0 mL-H2/g-volatile-solids (VS), while only 394 mL/L and 26.3 mL-H2/g-VS were obtained from the acid-pretreated biomass.

CONCLUSIONS

Acid-thermal pretreatment was effective in solubilizing the biomass of Chlorella sp. Heat exerted synergistic effect with acid to release nutrients from the biomass. Satisfactory HY obtained with the acid-thermal pretreated biomass demonstrates that this pretreatment method was effective, and that it should be implemented to achieve high HY.