Pretreatment of lignocellulosic biomass with renewable cholinium ionic liquids: Biomass fractionation, enzymatic digestion and ionic liquid reuse

Lignocellulose-Derived Energy Materials and Chemicals: A Review on Synthesis Pathways and Machine Learning Applications

Lignocellulose biomass, Earth's most abundant renewable resource, is crucial for sustainable production of high-value chemicals and bioengineered materials, especially for energy storage. Efficient pretreatment is vital to boost lignocellulose conversion to bioenergy and biomaterials, cut costs, and broaden its energy-sector applications. Machine learning (ML) has become a key tool in this field, optimizing pretreatment processes, improving decision-making, and driving innovation in lignocellulose valorization for energy storage. This review explores main pretreatment strategies - physical, chemical, physicochemical, biological, and integrated methods - evaluating their pros and cons for energy storage. It also stresses ML's role in refining these processes, supported by case studies showing its effectiveness. The review examines challenges and opportunities of integrating ML into lignocellulose pretreatment for energy storage, underlining pretreatment's importance in unlocking lignocellulose's full potential. By blending process knowledge with advanced computational techniques, this work aims to spur progress toward a sustainable, circular bioeconomy, particularly in energy storage solutions.

Challenging DESs and ILs in the valorization of food waste: a case study

In this study, the efficacy of two of the best performing green solvents for the fractionation of lignocellulosic biomass, cholinium arginate (ChArg) as biobased ionic liquid (Bio-IL) and ChCl:lactic acid (ChCl:LA, 1:10) as natural deep eutectic solvent (NADES), was investigated and compared in the pretreatment of an agri-food industry waste, apple fibers (90°C for 1 h). For the sake of comparison, 1-butyl-3-methylimidazolium acetate (BMIM OAc) as one of the best IL able to dissolve cellulose was also used. After the pretreatment, two fractions were obtained in each case. The results gathered through FTIR and TG analyses of the two materials and the subsequent DNS assay performed after enzymatic treatment led to identify ChArg as the best medium to delignify and remove waxes, present on the starting apple fibers, thus producing a material substantially enriched in cellulose (CRM). Conversely, ChCl:LA did not provide satisfactorily results using these mild conditions, while BMIM OAc showed intermediate performance probably on account of the reduced crystallinity of cellulose after the dissolution-regeneration process. To corroborate the obtained data, FTIR and TG analyses were also performed on the residues collected after the enzymatic hydrolysis. At the end of the pretreatment, ChArg was also quantitatively recovered without significant alterations.

Biodegradation of Choline NTF2 by Pantoea agglomerans in Different Osmolarity. Characterization and Environmental Implications of the Produced Exopolysaccharide

A specific microorganism, Pantoea agglomerans uam8, was isolated from the ionic liquid (IL) Choline NTF2 and identified by molecular biology. A biodegradation study was performed at osmolarity conditions (0.2, 0.6, 1.0 M). These had an important influence on the growth of the strain, exopolysaccharide (EPS) production, and biodegradation (1303 mg/L max production and 80% biodegradation at 0.6 M). These conditions also had an important influence on the morphology of the strain and its EPSs, but not in the chemical composition. The EPS (glucose, mannose and galactose (6:0.5:2)) produced at 0.6 M was further characterized using different techniques. The obtained EPSs presented important differences in the behavior of the emulsifying activity for vegetable oils (olive (86%), sunflower (56%) and coconut (90%)) and hydrocarbons (diesel (62%), hexane (60%)), and were compared with commercial emulsifiers. The EPS produced at 0.6 M had the highest emulsifying activity overall. This EPS did not show cytotoxicity against the tested cell line (<20%) and presented great advantages as an antioxidant (1,1-diphenyl-2-picryl-hydrazyl radical (DPPH) (85%), hydroxyl radical (OH) (99%), superoxide anion (O2-) (94%), chelator (54%), and antimicrobial product (15 mm). The osmolarity conditions directly affected the capacity of the strain to biodegrade IL and the subsequently produced EPS. Furthermore, the EPS produced at 0.6 M has potential for environmental applications, such as the removal of hazardous materials by emulsification, whilst resulting in positive health effects such as antioxidant activity and non-toxicity.

Microstructures of Choline Amino Acid based Biocompatible Ionic Liquids

Bio-compatible ionic liquids (Bio-ILs) represent a class of solvents with peculiar properties and exhibit huge potential for their applications in different fields of chemistry. Ever since they were discovered, researchers have used bio-ILs in diverse fields such as biomass dissolution, CO2 sequestration, and biodegradation of pesticides. This review highlights the ongoing research studies focused on elucidating the microscopic structure of bio-ILs based on cholinium cation ([Ch]+ ) and amino acid ([AA]- ) anions using the state-of-the-arta b i n i t i o ${ab\hskip0.25eminitio}$ and classical molecular dynamics (MD) simulations. The microscopic structure associated with these green ILs guides their suitability for specific applications. ILs of this class differ in the side chain of the amino acid anions, and varying the side chain significantly affects the structure of these ILs and thus helps in tuning the efficiency of biomass dissolution. This review demonstrates the central role of the side chain on the morphology of choline amino acid ([Ch][AA]) bio-ILs. The seemingly matured field of bio-ILs and their employment in various applications still holds significant potential, and the insights on their microscopic structure would steer the field of target specific application of these green ILs.

The pretreatment of the sustainable biomass feedstock of Pennisetum giganteum for biorefinery using deep eutectic solvents

In this study, Pennisetum giganteum (PG) was investigated as lignocellulosic feedstock to be pretreated by the acidic and basic deep eutectic solvents (DESs) to generate monomeric sugars. The basic DESs showed excellent efficiency of delignification and saccharification. ChCl/MEA can remove 79.8 % lignin and reserve 89.5 % cellulose. As a result, 95.6 % glucose and 88.0 % xylose yield were obtained, significantly enhanced 9.4 and 15.5 times in contrast with those of the unpretreated PG. The 3D microstructures of raw and pretreated PG were constructed for the first time to better investigate the pretreatment effect on its structure. The increasing porosity (20.5 %) and the reducing CrI (42.2 %) contributed in enhancing enzymatic digestion. Moreover, the recyclability of DES indicated that at least 90 % DES was recovered and 59.5 % lignin still can removed with 79.8 % glucose were obtained after five recycling cycles. Meanwhile, 51.6 % lignin was recovered throughout the recycling process.

Challenges in Using Ionic Liquids for Cellulosic Ethanol Production

The growing need to expand the use of renewable energy sources in a sustainable manner, providing greater energy supply security and reducing the environmental impacts associated with fossil fuels, finds in the agricultural by-product bioethanol an economically viable alternative with significant expansion potential. In this regard, a dramatic boost in the efficiency of processes already in place is required, reducing costs, industrial waste, and our carbon footprint. Biofuels are one of the most promising alternatives to massively produce energy sustainably in a short-term period. Lignocellulosic biomass (LCB) is highly recalcitrant, and an effective pretreatment strategy should also minimize carbohydrate degradation by diminishing enzyme inhibitors and other products that are toxic to fermenting microorganisms. Ionic liquids (ILs) have been playing an important role in achieving cleaner processes as a result of their excellent physicochemical properties and outstanding performance in the dissolution and fractionation of lignocellulose. This review provides an analysis of recent advances in the production process of biofuels from LCB using ILs as pretreatment and highlighting techniques for optimizing and reducing process costs that should help to develop robust LCB conversion processes.

Closing the Nutrient Loop-The New Approaches to Recovering Biomass Minerals during the Biorefinery Processes

The recovery of plant mineral nutrients from the bio-based value chains is essential for a sustainable, circular bioeconomy, wherein resources are (re)used sustainably. The widest used approach is to recover plant nutrients on the last stage of biomass utilization processes-e.g., from ash, wastewater, or anaerobic digestate. The best approach is to recover mineral nutrients from the initial stages of biomass biorefinery, especially during biomass pre-treatments. Our paper aims to evaluate the nutrient recovery solutions from a trans-sectorial perspective, including biomass processing and the agricultural use of recovered nutrients. Several solutions integrated with the biomass pre-treatment stage, such as leaching/bioleaching, recovery from pre-treatment neoteric solvents, ionic liquids (ILs), and deep eutectic solvents (DESs) or integrated with hydrothermal treatments are discussed. Reducing mineral contents on silicon, phosphorus, and nitrogen biomass before the core biorefinery processes improves processability and yield and reduces corrosion and fouling effects. The recovered minerals are used as bio-based fertilizers or as silica-based plant biostimulants, with economic and environmental benefits.

Highly Efficient Fractionation of Cornstalk into Noncondensed Lignin, Xylose, and Cellulose in Formic Acid

Traditional pretreatment of lignocellulose is usually conducted under higher acidic and high temperature conditions, which leads to both the degradation of sugar and the condensation of lignin, hindering the subsequent conversion. An effective approach to fractionate lignocellulose into 93.9% of noncondensed lignin, 99.4% of cellulose, 17.8% of xylose, and 66.7% of xylooligosaccharides under mild conditions was developed using the formic acid solution at 80 °C for 100 min. The β-O-4 bond content of lignin fractionated with formic acid (54.6 per 100 C9 units) was higher than dioxasolv lignin (48.4 per 100 C9 units), indicating that formic acid pretreatment well protected the ether bonds in lignin. Therefore, the hydrogenolysis of fractionated lignin contributed to 28.0% of aromatic monomer yield, which was comparable to dioxasolv lignin. As cellulose possesses a large amount of porosity because lignin was separated from lignocellulose, the hydrolysis of fractionated cellulose by molten salt hydrates gave a 96.4% of glucose yield.

Biorefinery of Brewery Spent Grain by Solid-State Fermentation and Ionic Liquids

Novel environmentally friendly pretreatments have been developed in recent years to improve biomass fractionation. Solid-state fermentation (SSF) and treatment with ionic liquids show low environmental impact and can be used in biorefinery of biomass. In this work, these processes were assessed with brewery spent grain (BSG). First, BSG was used as a substrate to produce cellulases and xylanases by SSF with the fungi Aspergillus brasiliensis CECT 2700 and Trichoderma reesei CECT 2414. Then, BSG was pretreated with the ionic liquid [N₁₁₁₂OH][Gly] and hydrolyzed with the crude enzymatic extracts. Results showed that SSF of BSG with A. brasiliensis achieved the highest enzyme production; meanwhile, the pretreatment with ionic liquids allowed glucan and xylan fractions to increase and reduce the lignin content. In addition, a mixture of the extracts from both fungi in a ratio of 2.5:0.5 Aspergillus/Trichoderma (v/v) efficiently hydrolyzed the BSG previously treated with the ionic liquid [N₁₁₁₂OH][Gly], reaching saccharification percentages of 80.68%, 54.29%, and 19.58% for glucan, xylan, and arabinan, respectively. In conclusion, the results demonstrated that the BSG biorefinery process developed in this work is an effective way to obtain fermentable sugar-containing solutions, which can be used to produce value-added products.

A Combination of Lactic Acid Bacteria and Molasses Improves Fermentation Quality, Chemical Composition, Physicochemical Structure, in vitro Degradability and Rumen Microbiota Colonization of Rice Straw

Aims

This study aims to evaluate the effect of lactic acid bacteria (LAB) and LAB-molasses (LAB + M) combination on the fermentation quality, chemical composition, physicochemical properties, in vitro degradability of rice straw and the characteristics of rumen microbial colonization on rice straw surface.

Methods and Results

There were three pretreatments, including control (not treated, Con), treated with LAB, or LAB + M. The results showed that both LAB and LAB + M treatments altered the physical and chemical structures of rice straw and were revealed by scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD) spectroscopy, respectively. Moreover, both LAB and LAB + M pretreated rice straw increased the crude protein (CP) content, dry matter (DM) recovery, and in vitro digestibility and decreased the pH value, neutral detergent fiber (NDF), and acid detergent fiber (ADF) contents. The LAB + M pretreated rice straw increased the gas production (GP72) and rumen microbial colonization on the rice straw surface.

Conclusions

It is observed that LAB + M treatment could increase digestibility and the rumen microbial colonization on the rice straw surface. Therefore, LAB + M treatment can provide an alternative strategy to improve the quality of rice straw. Significance and impact of the study: This study provides an optimal pretreatment to improve the rice straw digestibility and rumen microbial colonization.

Green route for recycling of low-cost waste resources for the biosynthesis of nanoparticles (NPs) and nanomaterials (NMs)-A review

Nowadays, nanoparticles (NPs) and nanomaterials (NMs) are used extensively in various streams such as medical science, solar energy, drug delivery, water treatment, and detection of persistent pollutants. Intensive synthesis of NPs/NMs carried out via physico-chemical technologies is deteriorating the environment globally. Therefore, an urgent need to adopt cost-effective and green technologies to synthesize NPs/NMs by recycling of secondary waste resources is highly required. Environmental wastes such as metallurgical slag, electronics (e-waste), and acid mine drainage (AMD) are rich sources of metals to produce NPs. This concept can remediate the environment on the one hand and the other hand, it can provide a future roadmap for economic benefits at industrial scale operations. The waste-derived NPs will reduce the industrial consumption of limited primary resources. In this review article, green emerging technologies involving lignocellulosic waste to synthesize the NPs from the waste streams and the role of potential microorganisms such as microalgae, fungi, yeast, bacteria for the synthesis of NPs have been discussed. A critical insight is also given on use of recycling technologies and the incorporation of NMs in the membrane bioreactors (MBRs) to improve membrane functioning and process performance. Finally, this study aims to mitigate various persisting scientific and technological challenges for the safe disposal and recycling of organic and inorganic waste for future use in the circular economy.

A paradigm shift towards production of sustainable bioenergy and advanced products from Cannabis/hemp biomass in Canada

The global cannabis (Cannabis sativa) market was 17.7 billion in 2019 and is expected to reach up to 40.6 billion by 2024. Canada is the 2nd nation to legalize cannabis with a massive sale of $246.9 million in the year 2021. Waste cannabis biomass is managed using disposal strategies (i.e., incineration, aerobic/anaerobic digestion, composting, and shredding) that are not good enough for long-term environmental sustainability. On the other hand, greenhouse gas emissions and the rising demand for petroleum-based fuels pose a severe threat to the environment and the circular economy. Cannabis biomass can be used as a feedstock to produce various biofuels and biochemicals. Various research groups have reported production of ethanol 9.2-20.2 g/L, hydrogen 13.5 mmol/L, lipids 53.3%, biogas 12%, and biochar 34.6% from cannabis biomass. This review summarizes its legal and market status (production and consumption), the recent advancements in the lignocellulosic biomass (LCB) pre-treatment (deep eutectic solvents (DES), and ionic liquids (ILs) known as "green solvents") followed by enzymatic hydrolysis using glycosyl hydrolases (GHs) for the efficient conversion efficiency of pre-treated biomass. Recent advances in the bioconversion of hemp into oleochemicals, their challenges, and future perspectives are outlined. A comprehensive insight is provided on the trends and developments of metabolic engineering strategies to improve product yield. The thermochemical processing of disposed-off hemp lignin into bio-oil, bio-char, synthesis gas, and phenol is also discussed. Despite some progress, barricades still need to be met to commercialize advanced biofuels and compete with traditional fuels.

Synthesis of 5-hydroxymethylfurfural from glucose, fructose, cellulose and agricultural wastes over sulfur-doped peanut shell catalysts in ionic liquid

In this study, waste peanut shells were sulfur-impregnated and used as acid catalysts in the presence of an ionic liquid for the conversion of fructose, glucose, and cellulose into 5-hydroxymethylfurfural, a useful chemical intermediate for biofuel production. Effects of sulfur-doping duration (1 h and 5 h), solvent type and proportion, reaction temperature (130 °C, 140 °C, and 150 °C), time (30-240 min), catalyst-to-substrate ratio (1-2.5 m/m), and agricultural residue (peanut shell, Canada wheat straw, water hyacinth, stalk, and reed) on HMF yields were investigated. Monophasic and biphasic ionic liquids such as [amim]Cl, [bmim]HSO₄, and [emim]Cl were employed in combination with choline chloride and dimethyl sulfoxide to improve HMF yields. Results show that peanut shells subjected to prolonged sulfur impregnation produced higher HMF yields. At 130 °C and 2 h, HMF yields from fructose and glucose reached 94.6% and 55.1%, respectively. Higher reaction temperatures improved HMF yields and accelerated conversion rates for the sugar substrates. Moreover, HMF production from waste biomass namely, peanut shells, peanut stalk, Canadian wheat straw, reed, and water hyacinth were examined in separate one-pot catalytic reactions. Overall, the study showed the effectiveness of sulfur-doped peanut shells as solid acid catalysts for the synthesis of HMF from various sources and the results may be used in designing large-scale production of furanic biofuel precursors from agricultural wastes.

Evaluation of miscanthus pretreatment effect by Choline chloride based Deep Eutectic solvents on bioethanol production

This work evaluates the efficiency of three deep eutectic solvents constituted of choline chloride and urea or glycerol or ethylene glycol in the pretreatment of the miscanthus in view of extracting cellulose. Analysis of experiments shows that basicity and polarity of the hydrogen bond donor of these DESs are directly related to the miscanthus solubility. The best efficient process was found using {Choline chloride/glycerol} mixture for the pretreatment at a temperature of 373 K and a duration of about 6 h. This may be explained by the fact that {Choline chloride/glycerol} pretreatment allows to obtain an amorphous cellulose. {Choline chloride/glycerol} was as efficiently as IL pretreatments with an ethanol production of about 72%. This study shows that Choline chloride based DESs pretreatment for biomass could be a key point to enhance the efficiency of biorefinery.

Synthesis of functional dicationic ionic liquids for the treatment of lignocellulosic biomass

Mono-cationic ionic liquids (MILs) have been widely utilized for the treatment of lignocelluloses. However, the hydrophilic property of MILs increases the difficulty of isolating sugars and their reuse, which limits their industrial application. In the present study, a series of dicationic ionic liquids (DILs) were synthesized with totally different di-cations and di-anions. An alternating miscibility of DILs with water was observed depending on the dealing temperature. The functional DILs exhibiting hydrophobic and acidic properties were investigated for the treatment of corn stalk. High yields of sugars were achieved as 27.8% and 31.6% with DIL3 and DIL4, respectively. Cellulosic materials were obtained as 74.3% and 77.8% with DIL1 and DIL2 and 61.2% and 65.7% with DIL3 and DIL4, respectively. Enzymatic reaction was successfully performed with cellulosic materials after the DIL treatment. DILs were recycled and reused with no significant reduction in sugar yields. Hydrophobic DILs are a potentially effective approach to enable the successful decomposition and degradation of lignocellulosic biomass.

Integrated strategies for enzyme assisted extraction of bioactive molecules: A review

Conventional methods of extracting bioactive molecules are gradually losing pace due to their numerous disadvantages, such as product degradation, lower efficiency, and toxicity. Thus, in light of the rising demand for these bioactive, enzymes have garnered much attention for their efficiency in extraction. However, enzyme-assisted extraction is also plagued with a high capital cost that cannot justify the extraction yields obtained. In order to mitigate these problems, enzyme-assisted extraction can be consorted with non-conventional methods. This review includes current progress concerning the combined approaches while converging the recent advancements in the field that outperformed conventional extraction processes. It also highlights the design of biocatalyst and key parameters involved in the effective extraction of bioactive molecules. An integrated approach for efficiently extracting polyphenols, essential oils, pigments, and vitamins has been comprehensively reviewed. Furthermore, the different immobilization strategies have been discussed for large-scale implementation of enzymes for extraction. The integration of advanced non-conventional methods with enzyme-assisted extraction will open new avenues to enhance the overall extraction efficiency.

Improved one-pot synthesis of furfural from corn stalk with heterogeneous catalysis using corn stalk as biobased carrier in deep eutectic solvent-water system

Using acid-treated corn stalk (CS) as biobased carrier, heterogeous SO₄^2-/SnO₂-CS catalyst was firstly prepared to catalyze CS into fufural in deep eutectic solvent-water system. The physical properties of SO₄^2-/SnO₂-CS were captured by FT-IR, NH₃-TPD, XRD, XPS, and BET. SO₄^2-/SnO₂-CS (1.2 wt%) could be used to catalyze CS (75.0 g/L) with MgCl₂ (15.0 g/L) to produce furfural (102.3 mM) in the yield of 68.2% for 0.5 h at 170 °C in ChCl:EG-water (20:80, v:v). Moreover, enhanced synthesis of furfural was explored based on the structure changes of CS, furfural yields and formation of byproducts. Finally, the potential catalytic mechanism for catalyzing CS into furfural and byproducts was proposed using SO₄^2-/SnO₂-CS as catalyst in ChCl:EG-water containing MgCl₂. In summary, this established ChCl:EG-water system and optimized catalytic condition facillitated to synthesize furfural from biomass with biobased solid acid catalyst.

Ionic liquid pretreatment of stinging nettle stems and giant miscanthus for bioethanol production

Production of ethanol from lignocellulosic biomass is considered the most promising proposition for developing a sustainable and carbon-neutral energy system. The use of renewable raw materials and variability of lignocellulosic feedstock generating hexose and pentose sugars also brings advantages of the most abundant, sustainable and non-food competitive biomass. Great attention is now paid to agricultural wastes and overgrowing plants as an alternative to fast-growing energetic crops. The presented study explores the use of stinging nettle stems, which have not been treated as a source of bioethanol. Apart from being considered a weed, stinging nettle is used in pharmacy or cosmetics, yet its stems are always a non-edible waste. Therefore, the aim was to evaluate the effectiveness of pretreatment using imidazolium- and ammonium-based ionic liquids, enzymatic hydrolysis, fermentation of stinging nettle stems, and comparison of such a process with giant miscanthus. Raw and ionic liquid-pretreated feedstocks of stinging nettle and miscanthus were subjected to compositional analysis and scanning electron microscopy to determine the pretreatment effect. Next, the same conditions of enzymatic hydrolysis and fermentation were applied to both crops to explore the stinging nettle stems potential in the area of bioethanol production. The study showed that the pretreatment of both stinging nettle and miscanthus with imidazolium acetates allowed for increased availability of the critical lignocellulosic fraction. The use of 1-butyl-3-methylimidazolium acetate in the pretreatment of stinging nettle allowed to obtain very high ethanol concentrations of 7.3 g L^-1, with 7.0 g L^-1 achieved for miscanthus. Results similar for both plants were obtained for 1-ethyl-3-buthylimidazolium acetate. Moreover, in the case of ammonium ionic liquids, even though they have comparable potential to dissolve cellulose, it was impossible to depolymerize lignocellulose and extract lignin. Furthermore, they did not improve the efficiency of the hydrolysis process, which in turn led to low alcohol concentration. Overall, from the presented results, it can be assumed that the stinging nettle stems are a very promising bioenergy crop.

Recent Advances in the Biosynthesis of Polyhydroxyalkanoates from Lignocellulosic Feedstocks

Polyhydroxyalkanoates (PHA) are biodegradable polymers that are considered able to replace synthetic plastic because their biochemical characteristics are in some cases the same as other biodegradable polymers. However, due to the disadvantages of costly and non-renewable carbon sources, the production of PHA has been lower in the industrial sector against conventional plastics. At the same time, first-generation sugar-based cultivated feedstocks as substrates for PHA production threatens food security and considerably require other resources such as land and energy. Therefore, attempts have been made in pursuit of suitable sustainable and affordable sources of carbon to reduce production costs. Thus, in this review, we highlight utilising waste lignocellulosic feedstocks (LF) as a renewable and inexpensive carbon source to produce PHA. These waste feedstocks, second-generation plant lignocellulosic biomass, such as maize stoves, dedicated energy crops, rice straws, wood chips, are commonly available renewable biomass sources with a steady supply of about 150 billion tonnes per year of global yield. The generation of PHA from lignocellulose is still in its infancy, hence more screening of lignocellulosic materials and improvements in downstream processing and substrate pre-treatment are needed in the future to further advance the biopolymer sector.

The application of amino acid ionic liquids as additives in the ultrasound-assisted extraction of plant material

The aim of the present study was to determine the antioxidant activity of the aqueous extracts from Lycopodium clavatum, Cetraria islandica and Dipsacus fullonum obtained using aqueous solutions of ionic liquids by the ultrasound-assisted extraction (IL-UAE) method. Triethanolammonium salts [TEAH]⁺[AA]⁻ of four amino acids of different hydrophobicity – isoleucine – Ile, methionine – Met, threonine – Thr and arginine – Arg, were chosen as ionic liquids, because they are based on natural, bio-renewable raw materials, such as amino acids and contain a pharmaceutically and cosmetically acceptable counterion of triethanolamine. Triethanolammonium salts were synthesized, identified by spectroscopic methods (NMR and FT-IR) and characterized by thermal methods (DSC and TGA). The 2.5% w/v aqueous solutions of triethanolammonium amino acid salts were used as the solvents in combination with ultrasound assisted extraction (UAE). The estimation of antioxidant properties was carried out using the DPPH, FRAP and CUPRAC assays. Total polyphenol content was measured using the reagent Folin–Ciocalteu. The results showed that the use of [TEAH]⁺[Thr]⁻ or [TEAH]⁺[Met]⁻ aqueous solutions increased the antioxidant activity of extracts in comparison to that achieved for extracts with pure water. The use of [TEAH]⁺[Thr]⁻ as an additive for ultrasound-assisted extraction was characterized by obtaining plant extracts with the highest antioxidant potential, even 2.4-fold. The use of the AAIL-UAE method allowed obtaining higher amounts of polyphenols compared to pure water extracts, even 5.5-fold. The used method allowed the extraction of thermosensitive natural compounds, shortened the extraction time and lowered energy consumption.

The antioxidant activity of the aqueous extracts from Lycopodium clavatum, Cetraria islandica and Dipsacus fullonum obtained by ionic liquids and ultrasound-assisted extraction (IL-UAE) method was determined.

Fabrication of Magnetic Catalyst Fe3O4-SiO2-V3 and Its Application on Lignin Extraction from Corncob in Deep Eutectic Solvent

Fe3O4-SiO2-V3 was prepared by deposited H6PMo9V3O40 on Fe3O4-SiO2 and employed as a catalyst to extract lignin from corncob in deep eutectic solvent (choline chloride/lactic acid = 1/10). Batch experiments were conducted in an autoclave under the conditions of 500 kPa, 90-130 °C and 15 h, while the dosage of the catalyst was set as a variable. Results indicated that the catalyst could effectively improve the qualities of the lignin, while the characteristics of the lignin showed prominent changes with the participation of the catalyst: the extraction rate increased from 71.65% to 98.13%, the purity was improved from 85.62% to 97.09%, and both the number average molecular weight and the weight average molecular weight also decreased significantly. Besides, the molecular distribution of the lignin achieved from the CC-LA-Fe-Si-V3 reaction system was found to be more highly concentrated (Polydispersity index = 1.746). Results from 2D NMR HSQC analysis indicated that lignin fractions achieved from the CC-LA-Fe-Si-V3 system showed distinct destruction involving C2-H2 in guaiacyl units (G), C5-H5 in guaiacyl units (G), and the Cγ-Hγ in γ-hydroxylated β-O-4' substructures, but little changes in the Cγ-Hγ in phenylcoumaran substructures.

2G waste lignin to fuel and high value-added chemicals: Approaches, challenges and future outlook for sustainable development

Lignin is produced as a byproduct in cellulosic biorefinery as well in pulp and paper industries and has the potential for the synthesis of a variety of phenolics chemicals, biodegradable polymers, and high value-added chemicals surrogate to conventional petro-based fuels. Therefore, in this critical review, we emphasize the possible scenario for lignin isolation, transformation into value addition chemicals/materials for the economic viability of current biorefineries. Additionally, this review covers the chemical structure of lignocellulosic biomass/lignin, worldwide availability of lignin and describe various thermochemical (homogeneous/heterogeneous base/acid-catalyzed depolymerization, oxidative, hydrogenolysis etc.) and biotechnological developments for the production of bio-based low molecular weight phenolics, i.e. polyhydroxyalkanoates, vanillin, adipic acid, lipids etc. Besides, some functional chemicals applications, lignin-formaldehyde ion exchange resin, electrochemical and production of few targeted chemicals are also elaborated. Finally, we examine the challenges, opportunities and prospects way forward related to lignin valorization.

Staged organosolv pretreatment to increase net energy and reactive lignin yield in whole oil palm tree biorefinery

Pretreatment is the most crucial and energy-intensive unit process affecting the feasibility of biorefinery, especially when lignin valorization is of concern. This study investigated and quantified the potential benefits of an innovative staged organosolv (OS)-dilute acid (DA) pretreatment process for whole oil palm tree residues conversion. The staged OS-DA pretreatment resulted in approximately five times higher net energy (1.50 GJ/tonne) over the single-step OSDA process (0.30GJ/tonne) due to potential energy saving on solvent recovery and less water consumption. For sugar, OS-DA pretreated substrate achieved more than 90% of cellulose digestibility which was more than 40% higher than DA-OS substrate. For mono-lignin, significant reduction in crude lignin condensation (21.7%) was confirmed by two-dimensional NMR analysis. The overall mass balance showed that approximately 142.45 tonnes of bioethanol, or a net energy yield of 969.5 GJ, can be produced by OS-DA process from palm tree residues per hectare of oil palm farm.

Ionic liquids for regulating biocatalytic process: Achievements and perspectives

Biocatalysis has found enormous applications in sorts of fields as an alternative to chemical catalysis. In the pursue of green and sustainable chemistry, ionic liquids (ILs) have been considered as promising reaction media for biocatalysis, owing to their unique characteristics, such as nonvolatility, inflammability and tunable properties as regards polarity and water miscibility behavior, compared to organic solvents. In recent years, great developments have been achieved in respects to biocatalysis in ILs, especially for preparing various chemicals. This review tends to give illustrative examples with a focus on representative chemicals production by biocatalyst in ILs and elucidate the possible mechanism in such systems. It also discusses how to regulate the catalytic efficiency from several aspects and finally provides an outlook on the opportunities to broaden biocatalysis in ILs.

A review of sustainable lignocellulose biorefining applying (natural) deep eutectic solvents (DESs) for separations, catalysis and enzymatic biotransformation processes

Conventional biorefinery processes are complex, engineered and energy-intensive, where biomass fractionation, a key functional step for the production of biomass-derived chemical substances, demands industrial organic solvents and harsh, environmentally harmful reaction conditions. There is a timely, clear and unmet economic need for a systematic, robust and affordable conversion method technology to become greener, sustainable and cost-effective. In this perspective, deep eutectic solvents (DESs) have been envisaged as the most advanced novel polar liquids that are entirely made of natural, molecular compounds that are capable of an association via hydrogen bonding interactions. DES has quickly emerged in various application functions thanks to a formulations’ simple preparation. These molecules themselves are biobased, renewable, biodegradable and eco-friendly. The present experimental review is providing the state of the art topical overview of trends regarding the employment of DESs in investigated biorefinery-related techniques. This review covers DESs for lignocellulosic component isolation, applications as (co)catalysts and their functionality range in biocatalysis. Furthermore, a special section of the DESs recyclability is included. For DESs to unlock numerous new (reactive) possibilities in future biorefineries, the critical estimation of its complexity in the reaction, separation, or fractionation medium should be addressed more in future studies.

Technologies for Eucalyptus wood processing in the scope of biorefineries: A comprehensive review

Eucalyptus is the most widely planted type of hardwoods, and represents an important biomass source for the production of fuels, chemicals, and materials. Its industrial benefit can be achieved by processes following the biorefinery concept, which is based on the selective separation ("fractionation") of the major components (hemicelluloses, cellulose and lignin), and on the generation of added-value from the resulting fractions. This article provides a in-depth assessment on the composition of Eucalyptus wood and a critical evaluation of selected technologies allowing its overall exploitation. These latter include treatments with organosolvents and with emerging fractionation agents (ionic liquids and deep eutectic solvents). The comparative evaluation of the diverse processing technologies is carried out in terms of degree of fractionation, yields and selectivities. The weak and strong points, challenges, and opportunities of the diverse fractionation methods are identified, focusing on the integral utilization of the feedstocks.

Elgharbawy A, Khezri R, Wilfred CD. Prediction of Potential Ionic Liquids (ILs) for the Solid-Liquid Extraction of Docosahexaenoic Acid (DHA) from Microalgae Using COSMO-RS Screening Model

This study performs a screening of potential Ionic Liquids (ILs) for the extraction of Docosahexaenoic Acid (DHA) compounds by the calculation of capacity values. For this purpose, a Conductor-Like Screening Model for Real Solvents (COSMO-RS) was employed to study the molecular structures of the ILs, and therefore, predict their extraction potential. The capacity values of 22 anions combined with 16 cations based ILs, were investigated to evaluate the effectiveness of ILs in the extraction of DHA. It was found that among the investigated ILs, a combination of tetramethyl ammonium with SO₄ or Cl was the best fit for DHA extraction, followed by pyrrolidinium, imidazolium, pyridinium and piperidinium. Furthermore, it was observed that the extraction capacity and the selectivity of ILs decreased with an increase in alkyl chain length; therefore, ethyl chain-ILs, with the shortest chain lengths, were found to be most suitable for DHA extraction. The predicted results were validated through the experimentally calculated extraction yield of a DHA compound from Nannochloropsis sp. Microalgae. Five selected ILs, namely [EMIM][Cl], [BMIM][Cl], [TMAm][Cl], [EMPyr][Br] and [EMPyrro][Br], were selected from COSMO-RS for empirical extraction purposes, and the validation results pinpointed the good prediction capabilities of COSMO-RS. The findings in this study can simplify the process of selecting suitable ILs for DHA extraction and reduce the number of required empirical evaluations.

Enhancement of Lignin Extraction of Poplar by Treatment of Deep Eutectic Solvent with Low Halogen Content

A novel choline-based deep eutectic solvent (DES) with low halogen content—namely choline lactate-lactic acid (CLL)—was synthesized by replacing the chloride anion with lactate anion in choline chloride-lactic acid (CCL). CLL and CCL treatments were conducted at 140 °C for 12 h with hydrogen bond acceptor/hydrogen bond donor =1/10, thereafter composition analysis and characterizations of the lignin extracted by DES treatment (DES lignin) and the solid residue were carried out. The proposed low halogen content DES presented an improved lignin extraction efficiency. The CLL treatment extracted 90.13% of initial lignin from poplar, while CCL extracted 86.02%. In addition, the CLL treatment also provided DES lignin with an improved purity (91.17%), lower molecular weight (Mw/Mn=1805/971 g/mol) and more concentrated distribution (polydispersity index=1.86). The efficient lignin extraction was mainly ascribed to the cleavage of β-O-4 bonds in lignin macromolecule, especially in the guaiacyl units, thereby breaking them into smaller molecules, facilitating the lignin extraction. The replacement of chloride anion allowed CLL acting as a more efficient DES to interact with lignin macromolecules, thus providing lignin with higher uniformity and suitable molecular weight. The low halogen content DES system proposed in present work could benefit the fractionation of biomass, improve the valorization of lignin compounds and facilitate industrial process in the downstream.

Cation and anion effect on the biodegradability and toxicity of imidazolium- and choline-based ionic liquids

This work studies the effect of the cation and anion on the biodegradability and inhibition of imidazolium- and choline-based ionic liquids (ILs) using activated sludge. Six commercial ILs, formed by combination of 1-Butyl-3-methylimidazolium (Bmim⁺) and N,N,N-trimethylethanolammonium (Choline⁺) cations and chloride (Cl^-), acetate (Ac^-) and bis(trifluoromethanesulfonyl)imide (NTf₂^-) anions were evaluated, all representative counter-ions with markedly different toxicity and biodegradability. Inherent and fast biodegradability tests were used to evaluate both the microorganism inhibition and the IL biodegradability. In addition, the ecotoxicological response (EC₅₀) of the ILs was studied using activated sludge and Vibrio fischeri (Microtox® test). Bmim⁺ and NTf₂^- can be considered as non-biodegradable, whereas aerobic microorganisms easily degraded Choline⁺ and Ac^-. The biodegradation pattern of each cation/anion is nearly unaffected by counter-ion nature. Moreover, concentrations of CholineNTf₂ higher than 50 mg/L caused a partial inhibition on microbial activity, in good concordance with its low EC₅₀ (54 mg/L) measured by respiration inhibition test, which alerts on the negative environmental impact of NTf₂-containing ILs on the performance of sewage treatment plants.

Pretreatment of mulberry stem by cholinium-based amino acid ionic liquids for succinic acid fermentation and its application in poly(butylene) succinate production

Cholinium-glycinate ([Ch][Gly]) and cholinium-alanate ([Ch][Ala]) were investigated on the pretreatment of mulberry stem (MS). It resulted in an increase of glucose from 14% to more than 74% compared to the untreated sample. Pretreatment by reused [Ch][Gly] showed good performance for delignification of >60%, and improved structural polysaccharide digestion. Each fractional component has high potential for lignin purification, and succinic acid fermentation. The extracted lignin with [Ch][Gly] showed >90% purity with good qualities of aromatic unit as confirmed by FT-IR and ¹H NMR spectra. The carbohydrate rich material was employed for succinic acid fermentation with the highest yield of succinic acid more than 0.89 g_{succinic acid}/g_glucose. After purification, poly(butylene) succinate (PBS) was synthesized, and was characterized in comparison to commercial PBS.

Methyl Ketones from Municipal Solid Waste Blends by One-Pot Ionic-Liquid Pretreatment, Saccharification, and Fermentation

The conversion of municipal solid waste (MSW) and lignocellulosic biomass blends to methyl ketones (MKs) was investigated by using bioderived ionic liquid (bionic liquid)-based hydrolysates followed by fermentation with an engineered Escherichia coli strain. The hydrolysates were produced by a one-pot process using six types of MSW-biomass blends, choline-based bionic liquids, and commercial enzymes. Based on the sugar yields, one blend (corn stover/MSW=95:5, w/w) and two bionic liquids {cholinium lysinate ([Ch][Lys]) and cholinium aspartate ([Ch]₂ [Asp])} were selected for scale-up studies. Maximum yields of 82.3 % glucose and 54.4 % xylose were obtained from the selected blend in the scale-up studies (6 L), which was comparable with 83.6 % glucose and 52.8 % xylose obtained at a smaller scale (0.2 L). Comparable or higher yields of medium-chain (C₁₁ -C₁₇ ) MKs were achieved by using the MSW-biomass blend-derived hydrolysates, relative to the sugar controls (glucose and xylose) with similar sugar feeding concentrations. Up to 1145 mg L^-1 of MKs was produced by using MSW-biomass-derived hydrolysates, and the MK titer decreased to 300 mg L^-1 when the bionic-liquid concentration in the hydrolysate increased from 1 to 2 %, indicative of bionic-liquid inhibition. Technoeconomic analysis was conducted to investigate the economic potential of using the selected MSW-biomass blend as a feedstock to produce MKs.

Synthesis of novel functional ionic liquids and their application in biomass

A series of dicationic ionic liquids (ILs) including [PF6][(PYR)C4(MIM)][Cl], [PF6][(PYR)C4(PYR)][Cl], [PF6][(PYR)C5(MIM)][Cl], and [PF6][(PYR)C5(PYR)][Cl], and monocationic ILs including [(PYR)C4Cl][PF6], [(PYR)C5Cl][PF6], [(MIM)C2COOH][PF6] and [(PYR)C2COOH][PF6] were synthesized. Their thermal stability and melting points were determined. Their solubility with organic solvents and the miscibility with water were investigated. These functional ILs are hydrophilic at high temperatures and they are hydrophobic at low temperatures, which enable the effective isolation of the resulting reducing sugar. High yields of reducing sugar were obtained for corn stalk after 8 h (20.73%) and potato starch after 6 h (72.50%) by the treatment with the mixture of [PF6][(PYR)C4(PYR)][Cl] and [(PYR)C2COOH][PF6]. The reuse of dicationic and monocationic ILs was successfully performed and no significant reduction in yields of reducing sugar was observed. These functional ILs have important implications in the design of homogeneous and heterogeneous systems with water and organic solvents, which could be used to satisfy some specific applications.

Recycling solvent system in phosphoric acid plus hydrogen peroxide pretreatment towards a more sustainable lignocellulose biorefinery for bioethanol

Pretreating lignocellulosic biomass by phosphoric acid plus hydrogen peroxide (PHP) was integrated with recovering concentrated phosphoric acid (CPA), lignin, and treating phosphorus (P) wastewater. Results indicated no significant effects on cellulose recovery was observed by promoting ethanol addition, but CPA and lignin recovery were improved to 80.0% and 23.3%, respectively. Increasing water addition did not greatly affect CPA recovery (80.0-80.4%), and lignin recovery (22.8-23.6%). Consequently, the ratio of 11:1 (ethanol/PHP solution) and 4:1 (water/de-ethanol liquor) were suggested for solid/liquid separation and lignin precipitation. Average 86.0% CPA was recycled for pretreatment (≥11 runs) with average 96.3% cellulose-glucose conversion. A specially-developed biochar from crab shell was efficient on P removal with maximal adsorption capacity of 261.6 mg/g. Pretreating 1.0 kg wheat straw by 1.1 kg CPA harvested 155.0 g ethanol, 45.0 g high purity lignin and 4.9 kg P-rich biochar fertilizer. Recovering CPA, biochar-fertilizer and lignin, and P wastewater treatment made PHP pretreatment towards more sustainable and cleaner.

Effect of Electron Beam Irradiation and Ionic Liquid Combined Pretreatment Method on Various Lignocellulosic Biomass

The objective of this study was to characterize the performance of lignocellulosic biomass (LCB) to assess its use as a potential bioethanol or biofuels through pretreatment process. The pretreatment process was performed to remove crystalline structural of biomasses in order to improve enzymatic hydrolysis process. In this work, combined electron beam irradiation and ionic liquid method was used as the pretreatment process for various LCBs such as Gigantochloa albociliata (GA), Leucaena leucocephala (LL), oil palm frond (OPF), acacia and microcrystalline cellulose (MCC) as reference. Irradiation dose was measured through electron beam accelerator over a range of 100-1000 kGy. Ionic liquid (IL) is known as green solvent that can dissolve cellulose. 50% v/v 1-ethyl-3-methylimidazolium acetate (EMIMAc) IL was employed to enhance the effect of irradiation in pretreatment process. The LCBs was analyzed by using two method; Fourier transform infrared (FTIR) and X-ray diffraction (XRD). FTIR result shows different pattern of spectra and peak for each condition. Lateral order index (LOI) based on Beer’s Law was also calculated to determine the changes in structure order after pretretament. For XRD results, the crystallinity index (CrI) of pretreated LCBs was calculated by using Segal’s Equation in order to determine the pattern based on different conditions. The highest percentage of effectiveness showed by pretreated Acacia as the values of LOI and CrI is the lowest compared to other LCBs which is 41.77% and 25.21%, respectively.

Determination of antioxidant ingredients in Mori Fructus employing ionic liquid-assisted miniaturized matrix solid-phase dispersion extraction via ultra-performance liquid chromatography

A simple miniaturized matrix solid-phase dispersion extraction was developed to analyze multiple antioxidant ingredients (neochlorogenic acid, chlorogenic acid, cryptochlorogenic acid, rutin, isoquercitrin, and astragalin) in Mori Fructus by ultra performance liquid chromatography coupled with an ultraviolet detector. 1-ethyl-3-methylimidazolium bromide was employed in the elution process as eco-friendly elution solvent. The effects of some factors on the extraction efficiency of antioxidants in Mori Fructus were optimized in detail, such as the type of adsorbent, the type of elution solvent, the concentration and volume of elution solvent, sample to adsorbent ratio, and the grinding time. The intra-day and inter-day precisions (RSD) were both below 5.0% and the recoveries of all analytes ranged from 93.5% to 98.3%. Compared with the traditional method, it was efficient, simple and environment-friendly for extracting the analytes by ionic liquid assisted trace β-CD matrix solid-phase dispersion extraction method, due to shorter extraction time, less reagent and less sample consumption. The developed method was successfully used for extracting and determining the active compounds in Mori Fructus sample. PRACTICAL APPLICATIONS: The antioxidant ingredients play important roles in Mori Fructus because of their main pharmacological activities. Nowadays, a few analytical methods could be applied for extracting and analyzing these target compounds. But these methods not only required much extracting and analyzing time, but also need a great deal of organic reagent, which were not environmentally friendly. Thus, a green and simple miniaturized matrix solid phase dispersion extraction method was proposed for the analysis of these antioxidants in Mori Fructus, which was efficient to be employed for evaluating the quality of Traditional Chinese Medicine.

Biocompatible ionic liquids: fundamental behaviours and applications

The bio- and eco-friendly nature of biocompatible ionic liquids contributes to their widespread use in a wide range of fields.

Obtaining fermentable sugars and bioproducts from rice husks by subcritical water hydrolysis in a semi-continuous mode

This work aimed at producing fermentable sugars and bioproducts from rice husks by subcritical water hydrolysis at 25 MPa in a semi-continuous mode. The influences of temperature (180 °C; 220 °C; 260 °C) and liquid/solid ratio (7.5 g water/g husks; 15 g water/g husks) on reducing sugar yield (Y_RS), efficiency (E), kinetic profiles (0-15 min), composition of sugars, inhibitors and organic acids, and physicochemical characteristics of the remaining solid material were evaluated and discussed in the work. The highest Y_RS (18.0 ± 2.9 g/100 g husks) and E (39.5 ± 1.7 g sugars/100 g carbohydrates) were obtained at 220 °C and 7.5 gwater/g husks. In such condition, the hydrolyzed solutions presented cellobiose (18.0 g/L), xylose 17.7 g/L), arabinose (3.6 g/L), glucose (1.5 g/L), and levulinic acid (0.7 g/L). The fermentable sugars and bioproducts can be applied in several industrial fields, especially for the production of bioethanol and other higher value-added chemical compounds.

Pretreatment of wheat straw using basic ethanolamine-based deep eutectic solvents for improving enzymatic hydrolysis

A series of ethanolamine based deep eutectic solvents (DESs), which have strong basicity, were firstly applied in wheat straw pretreatment. Typically, choline chloride: monoethanolamine (C:M) as the best solvent among these DESs can remove 71.4% lignin and reserve 93.7% cellulose (70 °C, L/S mass ratio of 20:1, 9 h), and improve the enzymatic hydrolysis of residue, i.e., 89.8% cellulose and 62.0% xylan conversion. The pretreatment capacity of C:M is comparable to other solvents while C:M has several advantages, e.g., lower cost with cheap materials and simpler preparation process, mild conditions and lower polysaccharide loss. The XRD, SEM and FT-IR results verified that the polysaccharide conversion and sugars yield were enhanced by the removal of lignin in the pretreatment process. The basic ethanolamine based DESs are promising solvents for industrial application of wheat straw pretreatment.

COSMO-RS-Based Screening of Antisolvents for the Separation of Sugars from Ionic Liquids: Experimental and Molecular Dynamic Simulations

The use of ionic liquids (ILs) in the biorefinery process has been increasing for the past few decades. In biorefinery, the separation process with respect to sugars needs to be evaluated for an efficient process design. Therefore, the present work aims to investigate the separation of sugars and ILs by means of a precipitation process using an antisolvent method. For this purpose, both theoretical and experimental studies were conducted. Initially, the conductor-like screening model for real solvents model was employed to screen the suitable antisolvents for the separation of sugars from the ILs. From the screening study, dichloromethane (DCM) and 1,2-dichloroethane were found to be the better antisolvents for the separation process. With the selected antisolvents, precipitation experiments were conducted for the mixtures involving four different sugars and three ILs at different experimental conditions. The process variables such as different antisolvents, sugars, ILs, antisolvent-IL molar ratios, and temperatures were examined in terms of their effect on sugar removal and IL recovery. DCM was found to be the most suitable antisolvent in this study with 90-99% of sugar removal and 80-98% of IL recovery. Further, molecular dynamics simulations were adopted to understand the structural properties of carbohydrates with ILs and antisolvents via interaction energies, hydrogen bonding, and coordination numbers. It was observed that the interaction energy between the sugars and IL plays a critical role in the removal of sugar. Higher the interaction energy between the sugars and IL, lower is the sugar removal.

Development of Acidic Imidazolium Ionic Liquids for Activation of Kraft Lignin by Controlled Oxidation: Comprehensive Evaluation and Practical Utility

A novel, eco-friendly method for the activation of lignin by controlled oxidation was studied. The results obtained for six acidic imidazolium ionic liquids containing the hydrogen sulfate anion were compared. The key goal of this research was to increase the content of carbonyl groups in the lignin structure because these may play the main role in the transport of protons and electrons in active materials for electrochemical applications. By means of a variety of analytical techniques (FTIR, ¹³ C CP/MAS NMR, and X-ray photoelectron spectroscopy; selected reactions to determine the presence of carbonyl groups; SEM; zeta-potential analysis; thermogravimetric analysis/differential thermogravimetric analysis; and porous structure analysis), it was determined that the product obtained after treatment with 3-cyclohexyloxymethy-1-methylimidazolium hydrogen sulfate had favorable properties, in terms of the target application. Electrochemical tests proved that the obtained materials could be used as anodes in lithium batteries. The results show that the activation of lignin with ionic liquids can increase its capacity and maintain stability.

Cholinium amino acids-glycerol mixtures: New class of solvents for pretreating wheat straw to facilitate enzymatic hydrolysis

New solvents for pretreating wheat straw, mixtures of cholinium amino acids ionic liquids ([Ch][AA] ILs) and glycerol, were developed. As a typical result, 50% cholinium alanine-glycerol is capable of removing 67.6% lignin while reserving 95.1% cellulose (90°C, L/S mass ratio of 20:1, 6h) and the conversions of cellulose and xylan are 89.7% and 70.9%, respectively, which is comparable to the pretreatment capability of other solvents, while [Ch][AA]-glycerol mixtures have desirable advantages, e.g., biocompatibility, lower cost with adding glycerol than pure IL, much lower pretreatment temperature (typically <100°C) than that by glycerol (typically >200°C). Lignin removal and polysaccharide conversion are dependent on [Ch][AA] content and pH of pretreatment solvents. [Ch][AA] not only remove lignin in wheat straw effectively but also swell cellulose while not remarkably dissolve cellulose with high cellulose reservation, favoring the enzymatic hydrolysis. Such mixtures of ILs and co-solvents are potential solvents for pretreating biomass.