Pyrosequencing reveals microbial community profile in anaerobic bio-entrapped membrane reactor for pharmaceutical wastewater treatment

Temperature drives microbial communities in anaerobic digestion during biogas production from food waste

Resource depletion and climate changes due to human activities and excessive burning of fossil fuels are the driving forces to explore alternatives clean energy resources. The objective of this study was to investigate the potential of potato peel waste (PPW) at various temperatures T15 (15 °C), T25 (25 °C), and T35 (35 °C) in anaerobic digestion (AD) for biogas generation. The highest biogas and CH4 production (117 mL VS-g and 74 mL VS-g) was observed by applying 35 °C (T35) as compared with T25 (65 mL VS-g and 22 mL VS-g) on day 6. Changes in microbial diversity associated with different temperatures were also explored. The Shannon index of bacterial community was not significantly affected, while there was a positive correlation of archaeal community with the applied temperatures. The bacterial phyla Firmicutes were strongly affected by T35 (39%), whereas Lactobacillus was the dominant genera at T15 (27%). Methanobacterium and Methanosarcina, as archaeal genera, dominated in T35 temperature reactors. In brief, at T35, Proteiniphilum and Methanosarcina were positively correlated with volatile fatty acids (VFAs) concentration. Spearman correlation revealed dynamic interspecies interactions among bacterial and archaeal genera; facilitating the AD system. This study revealed that temperature variations can enhance the microbial community of the AD system, leading to increased biogas production. It is recommended for optimizing the AD of food wastes.

Propidium monoazide - polymerase chain reaction reveals viable microbial community shifts in anaerobic membrane bioreactors treating domestic sewage at low temperature

An anaerobic membrane bioreactor (AnMBR) treated domestic sewage at 15 °C under different hydraulic retention time (HRT) conditions (6, 12, 16, and 24 h). Propidium monoazide (PMA)-PCR excluded microorganisms without intact cell membranes, focusing on the viable microbial community in anaerobic digestion. The results showed that the 6-hour HRT had poor treatment performance: low chemical oxygen demand removal efficiency (below 80%) and high mean trans-membrane pressure and flux (15 kPa and 9.4 L/(m2 h)). Comparatively, PMA-PCR combined with next-generation sequencing improved the identification of microbial changes compared to conventional 16S rRNA gene sequencing. HRT influenced microorganisms in the hydrolysis and acid-production stages, including carbohydrate-degrading bacteria such as Bifidobacterium and Prevotella 1. Remarkably, a comparison with an AnMBR at 25 °C showed Proteobacteria to be the main cause of membrane fouling in the low-temperature AnMBR, with most operational taxonomic units negatively correlated with HRT and solids retention time.

Performance and microbial community analysis of combined bioreactors in treating high-salinity hydraulic fracturing flowback and produced water

The anoxic/oxic systems are a widely used biological strategy for wastewater treatment. However, little is known about the performance and microbial community correlation of different combined bioreactors in the treatment of high-COD and high-salinity hydraulic fracturing flowback and produced water (HF-FPW). In this study, the performance of Up-flow anaerobic sludge bed-bio-contact oxidation reactor (UASB-BCOR) and Fixed-bed baffled reactor (FBR-BCOR) in treating HF-FPW was investigated and compared. The results suggested the FBR-BCOR could efficiently remove COD, SS, NH4+-N, and oil pollutants, and it exhibited better resistance to the negative interference of hydraulic shock load on it. Besides, the correlation analysis first disclosed the key functional genera during the degradation process, including Ignavibacterium, Ellin6067, and Zixibacteria. Moreover, network analysis revealed that the difference of microbial co-occurrence network structure is the main driving factor for the difference of bioreactor processing capacity. This work demonstrates the feasibility and potential of FBR-BCOR in treating HF-FPW.

Influence of nano-Fe3O4 biochar on the methanation pathway during anaerobic digestion of chicken manure

Volatile fatty acids and ammonia nitrogen (AN) accumulate during anaerobic digestion (AD) of high N substrates, such as chicken manure (CM), causing decreases in methane yield. Previous research found that the addition of nano-Fe₃O₄ biochar can alleviate the inhibition caused by acids and ammonia and increase methane production. The mechanism of enhanced methane production in nano-Fe₃O₄ biochar-mediated AD of CM was explored in depth in this study. The results showed the lowest AN concentration in the control and nano-Fe₃O₄ biochar addition groups were 8,229.0 mg/L and 7,701.5 mg/L, respectively. Methane yield of volatile solids increased from 92.0 mL/g to 219.9 mL/g in the nano-Fe₃O₄ biochar treatment, which was attributed to the enrichment of unclassified Clostridiales and Methanosarcina. The mechanism of nano-Fe₃O₄ biochar in AD of CM under high AN level was to improve methane production by promoting syntrophic acetate oxidation and facilitating direct electron transfer between microorganisms.

Effect of Temperature on Anaerobic Fermentation of Poplar Ethanol Wastewater: Performance and Microbial Communities

Temperature plays an important role in anaerobic digestion (AD), and different substrates have different optimum temperatures in AD. However, the effect of temperature on the performance of AD when cellulosic ethanol wastewater was used as a substrate was rarely reported. Therefore, the digestion characteristics of cellulosic ethanol wastewater at 25, 35, 45, and 55 °C were investigated, and the microbial communities of the sludge sample were analyzed after fermentation. The results showed that the cumulative methane production was the highest at 55 °C, 906.40 ± 50.67 mL/g VS, which was 81.06, 72.42, and 13.33% higher than that at 25, 35, and 45 °C, respectively. The content of methane was 68.13, 49.26, 70.46, and 85.84% at the terminal period of fermentation at temperatures of 25, 35, 45, and 55 °C, respectively. The testing of volatile fatty acids (VFAs) indicated that the accumulation of VFAs did not occur when the fermentation was carried out at 25, 35, and 45 °C; however, the VFA content at 55 °C was much larger than that in the three groups (25, 35, and 45 °C), and the ratio of propionic acid to acetic acid was larger than 1.4 at the late stage of fermentation, so it inhibited the fermentation. The diversity of the microbial community indicated that the floral structure and metabolic pathway of fermentation were alike at 25 and 35 °C. Firmicutes and Proteobacteria were the main flora covering the 25-55 °C-based phylum or below it. The relative abundance of Methanosaeta was the highest when fermentation temperatures were 25 and 35 °C; however, its relative abundance decreased sharply and the relative abundance of Methanosarcina increased substantially when the temperature increased from 35 to 45 °C, which indicated that Methanosarcina can exist in higher temperatures. At the same time, hydrogenotrophic methanogens such as Methanoculleus and Methanothermobacter were dominant when fermentation temperatures were 45 and 55 °C, which indicated that the metabolic pathway changed from acetoclastic methanogenesis to hydrogenotrophic methanogenesis.

Anaerobic membrane bioreactors for pharmaceutical-laden wastewater treatment: A critical review

Pharmaceuticalsare a diverse group of chemical compounds widely used for prevention and treatment of infectious diseases in both humans and animals. Pharmaceuticals, either in their original or metabolite form, find way into the wastewater treatment plants (WWTPs) from different sources. Recently, anaerobic membrane bioreactors (AnMBR) has received significant research attention for the treatment of pharmaceuticals in various wastewater streams. This review critically examines the behaviour and removal of a wide array of pharmaceuticals in AnMBR with primary focus on their removal efficiencies and mechanisms, critical influencing factors, and the microbial community structures. Subsequently, the inhibitory effects of pharmaceuticals on the performance of AnMBR and membrane fouling are critically discussed. Furthermore, the imperative role of membrane biofouling layer and its components in pharmaceuticals removal is highlighted. Finally, recent advancements in AnMBR configurations for membrane fouling control and enhanced pharmaceuticals removal are systemically discussed.

Antibiotics in anaerobic digestion: Investigative studies on digester performance and microbial diversity

The ever-increasing consumption of antibiotics in both humans and animals has increased their load in municipal and pharmaceutical industry waste and may cause serious damage to the environment. Impact of antibiotics on the performance of commercially used anaerobic digesters in terms of bioenergy output, antibiotics' removal and COD removal have been compared critically with a few studies indicating >90% removal of antibiotics. AnMBR performed the best in terms of antibiotic removal, COD removal and methane yield. Most of the antibiotics investigated have adverse effects on microbiome associated with different stages and methane generation pathways of AD which has been assessed using high throughput technologies like metatranscriptomics, metaproteomics and flow cytometry. Perspectives have been given for understanding the fate and elimination of antibiotics from AD. The challenge of optimization and process improvement needs to be addressed to increase efficiency of the anaerobic digesters.

Antibiotics and antibiotic resistant bacteria/genes in urban wastewater: A comparison of their fate in conventional treatment systems and constructed wetlands

There is a growing concern that the use and misuse of antibiotics can increase the detection of antibiotic resistant genes (ARGs) in wastewater. Conventional wastewater treatment plants provide a pathway for ARGs and antibiotic resistant bacteria (ARB) to be released into natural water bodies. Research has indicated that conventional primary and secondary treatment systems can reduce ARGs/ARB to varying degrees. However, in developing/low-income countries, only 8-28% of wastewater is treated via conventional treatment processes, resulting in the environment being exposed to high levels of ARGs, ARB and pharmaceuticals in raw sewage. The use of constructed wetlands (CWs) has the potential to provide a low-cost solution for wastewater treatment, with respect to removal of nutrients, pathogens, ARB/ARGs either as a standalone treatment process or when integrated with conventional treatment systems. Recently, CWs have also been employed for the reduction of antibiotic residues, pharmaceuticals, and emerging contaminants. Given the benefits of ARG removal, low cost of construction, maintenance, energy requirement, and performance efficiencies, CWs offer a promising solution for developing/low-income countries. This review promotes a better understanding of the performance efficiency of treatment technologies (both conventional systems and CWs) for the reduction of antibiotics and ARGs/ARB from wastewater and explores workable alternatives.

Augmentation characteristics and microbial community dynamics of low temperature resistant composite strains LTF-27

Biogas production in the cold regions of China is hindered by low temperatures, which led to slow lignocellulose biotransformation. Cold-adapted lignocellulose degrading microbial complex community LTF-27 was used to investigate the influence of hydrolysis on biogas production. After 5 days of hydrolysis at 15 ± 1 °C, the hydrolysis conversion rate of the corn straw went up to 22.64%, and the concentration of acetic acid increased to 2596.56 mg/L. The methane production rates of total solids (TS) inoculated by LTF-27 reached 204.72 mL/g, which was higher than the biogas (161.34 mL/g), and the control group (CK) inoculated with cultural solution (121.19 mL/g), the methane production rate of volatile solids (VS) increased by 26.88% and 68.92%, respectively. Parabacteroides, Lysinibacillus, and Citrobacter were the main organisms that were responsible for hydrolysis. While numerous other bacteria genera in the gas-producing phase, Macellibacteroides were the most commonly occurring one. Methanosarcina and Methanobacteriaceae contributed 86.25% and 11.80% of the total Archaea abundance during this phase. This study proves the psychrotrophic LTF-27's applicability in hydrolysis and biomass gas production in low temperatures.

Polymer Nanocomposite Membrane for Wastewater Treatment: A Critical Review

With regard to global concerns, such as water scarcity and aquatic pollution from industries and domestic activities, membrane-based filtration for wastewater treatment has shown promising results in terms of water purification. Filtration by polymeric membranes is highly efficient in separating contaminants; however, such membranes have limited applications. Nanocomposite membranes, which are formed by adding nanofillers to polymeric membrane matrices, can enhance the filtration process. Considerable attention has been given to nanofillers, which include carbon-based nanoparticles and metal/metal oxide nanoparticles. In this review, we first examined the current status of membrane technologies for water filtration, polymeric nanocomposite membranes, and their applications. Additionally, we highlight the challenges faced in water treatment in developing countries.

Unveiling the characterization and development of prokaryotic community during the start-up and long-term operation of a pilot-scale anaerobic membrane bioreactor for the treatment of real municipal wastewater

The anaerobic membrane bioreactor (AnMBR) is a promising sustainable process and technology for the treatment of municipal wastewater from the perspective of carbon neutrality. In this study, a large pilot-scale AnMBR was constructed and the microbial community development of the anaerobic digested sludge in the AnMBR was determined during the treatment of municipal wastewater. The AnMBR system was conducted for 217 days during a long-term operation with the feed of real municipal wastewater. The characterization and dynamics of the microorganisms revealed that a stable prokaryotic community was gradually achieved. In the community of methane-producing archaea (or methanogens), the acetotrophic methanogen Methanosaeta was significantly enriched at an ambient temperature of 25 °C with an overwhelming relative abundance in the entire community. The abundance of Methanosaeta was even higher than the most abundant bacterial phyla Chloroflexi, Firmicutes, Proteobacteria and Bacteroidetes. This phenomenon is quite different from that found in other typical anaerobic systems. The massive enrichment of methanogens is the key to maintaining stable methane production in the treatment of municipal wastewater by the AnMBR. The interspecies cooperation of major functional bacterial groups including protein/carbohydrate/cellulose-degrading (genera Anaerovorax, Aminomonas, Levilinea, Flexilinea and Ruminococcus etc.), sulfate-reducing (Desulfovibrio and Desulfomicrobium etc.) and syntrophic (Syntrophorhabdus and Syntrophus etc.) bacteria with acetotrophic and hydrogenotrophic archaea enhances the stability of reactor operation and help to acclimate the entire prokaryotic community to the characteristics of real municipal wastewater.

Anaerobic digestion characteristics and key microorganisms associated with low-temperature rapeseed cake and sheep manure fermentation

In this study, gas production from mixed anaerobic fermentation of rapeseed cake and sheep manure at low temperature (15.2-17.8 °C) was investigated in Qinghai rural household biogas digesters to understand the temporal dynamics of key microbial populations involved in fermentations. Different raw material ratios resulted in significantly different effects on biogas yields and microbial community compositions over 40 days. When the dry weight ratio of sheep manure to rapeseed cake was 1:2, the highest level of cumulative gas production was observed (122.92 m³·t^-1). Firmicutes, Proteobacteria, Bacteroidetes, and Actinobacteria were the dominant bacterial phyla among the 29 digester samples (total relative abundances > 79.23%), followed by Synergistetes (4.09-10.7%). Lactobacillus was the most abundant genus in the biogas digesters with high rapeseed cake contents (average relative abundances: 14.68%), while Peptoniphilus exhibited higher abundances (12.69%) in the mixed treatments. In addition, unclassified Synergistaceae abundances (6.64%) were positively associated with biogas production variation among treatments. Bacteroides (5.74%) and Pseudomonas (5.24%) both accounted for larger proportions of communities in the digesters that used more sheep manure. Methanomicrobiales (66.55%) was the most dominant archaeal group among digesters, with Methanogenium (41.82%) and Methanoculleus (16.55%) representing the main gas-producing archaeal genera; they were more abundant in biogas digesters with higher sheep manure contents and higher rapeseed cake contents, respectively. VFAs and pH were the main factors associated with differences in microbial communities among the 29 samples. Specifically, VFA concentrations were positively correlated with Lactobacillus, Methanoculleus and Methanothrix abundances, while pH was positively correlated with Bacteroides, Pseudomonas, and Methanobacterium abundances.

Study on the performance of HNO3-modified biochar for enhanced medium temperature anaerobic digestion of food waste

Biochar can help promote direct interspecies electron transfer (DIET) and increase methane production; the surface redox groups play a constructive role in these processes. This study attempted to improve the anaerobic digestion (AD) performance by modifying biochar with HNO₃ to increase its redox activity. A comparative experimental study, raw biochar (BC0) and biochar treated with HNO₃ for 6 h (BC6), were conducted to investigate the effect of HNO₃ treatment on the medium temperature AD performance of food waste. Both BC0 and BC6 can enhance CH₄ yield and facilitate the degradation of volatile fatty acids. The enhanced yield of CH₄ was 36% for BC0 and 90% for BC6, respectively. Biochar can also enhance methanogenesis, presumably owing to direct interspecific electron transfer (DIET). Compared with BC0, BC6 had a higher redox activity and a smaller conductivity. It was supposed that BC0 mediated DIET through its conductivity, whereas BC6 accelerated DIET by surface redox groups.

Long-term effectiveness of bioaugmentation with rumen culture in continuous anaerobic digestion of food and vegetable wastes under feed composition fluctuations

Biogas plants treating food waste (FW) often experience feed load and composition fluctuations. In Korea, vegetable waste from the preparation of kimchi comprises over 20% of the total FW production during the Kimjang season. The large production of Kimjang waste (KW) can cause mechanical and operational problems in FW digesters. This study investigated the long-term effectiveness of bioaugmentation with rumen culture (38 months) in an anaerobic reactor co-digesting FW with varying amounts of KW. The bioaugmented reactor maintained better and stabler performance under recurrent fluctuations in feed characteristics than a non-bioaugmented control reactor, particularly under high ammonia conditions. Bioaugmentation increased microbial diversity, thereby improving the resilience of the microbial community. Some augmented microorganisms, especially Methanosarcina, likely played an important role in it. The results suggest that the proposed bioaugmentation strategy may provide a means to effectively treat and valorize KW-and potentially other seasonal lignocellulosic wastes-by co-digestion with FW.

Microbial mechanism of enhancing methane production from anaerobic digestion of food waste via phase separation and pH control

Phase separation and pH control are commonly used to improve methane production during anaerobic digestion (AD) of food waste, but their influencing mechanisms have not been fully discovered through microbial analysis. In this study, single-phase AD (SPAD), two-phase AD without pH control (TPAD-pHUC), and TPAD with fermentation pH controlled at 6.0 and 4.5 were conducted. The results showed that phase separation decreased the ratio of total bacteria to total archaea in the methanogenic phase. At the organic loading rate (OLR) of 1.9 g/(L·d), methanogenesis was dominated by acetoclastic Methanosaeta in both SPAD and TPAD-pHUC, while elevated Methanoculleus and active hydrogen production initiated a shift from the acetoclastic to hydrogenotrophic pathway in SPAD as OLR increased, eventually resulting in excessive acidification at OLR 3.2 g/(L·d). TPAD-pHUC was dominated by Methanosaeta with scarce hydrogen production genes, and thus maintained a delicate balance between fewer acidogens and methanogens at OLR 3.2-3.7 g/(L·d). TPAD with pH control exhibited higher methane yield (460-482 ml/g) at OLR 1.9 g/(L·d) due to the enhancement of protein degradation and the conversion from methylated compounds to methane by Methanosarcina. High Na⁺ concentration facilitated the proliferation of hydrogen production bacteria, but inhibited acetoclastic methanogenesis at OLR 2.4 g/(L·d). In comparison with SPAD and pH control, TPAD without pH control, integrating 4 d acidogenesis and 22 d methanogenesis, exhibited the best and steady performance at OLR 3.7 g/(L·d) with methane production exceeding 370 ml/g.

Specific microbial diversity and functional gene (AOB amoA) analysis of a sponge-based aerobic nitrifying moving bed biofilm reactor exposed to typical pharmaceuticals

Four bench-scale sponge-based aerobic nitrifying moving bed biofilm reactors (MBBRs) were used to treat municipal wastewater containing typical pharmaceuticals (1 mg/L, 2 mg/L and 5 mg/L). This preliminary research aims to investigate the effects of sulfadiazine (SDZ), ibuprofen (IBU) and carbamazepine (CBZ) on nitrification performance and explore specific microbial diversity and functional gene (Ammonia-oxidizing bacteria (AOB), amoA) of MBBRs. After 90 days of operation, the MBBR without pharmaceuticals could remove up to 97.4 ± 1.5% of NH₄⁺-N while the removals of NH₄⁺-N by the MBBRs with SDZ, IBU and CBZ were all suppressed to varying degrees. Based on the Shannon and Chao 1 index, the specific microbial diversity and richness in biofilm samples increased at a range of 1 mg/L to 2 mg/L pharmaceuticals (SDZ, IBU or CBZ) and started decreasing after the pharmaceutical concentration was higher than 2 mg/L. The determination of functional gene (AOB amoA) showed that Proteobacteria was the most dominant bacteria within all biofilms with the relative abundance ranging from 24.81% to 55.32%. Furthermore, Nitrosomonas was the most numerous genus in AOB, followed by Campylobacter and Thauera, whose relative abundance shifted under the pressure of different pharmaceuticals.

A comprehensive review on contaminants removal from pharmaceutical wastewater by electrocoagulation process

The pharmaceuticals are emergent contaminants, which can create potential threats for human health and the environment. All the pharmaceutical contaminants are becoming enormous in the environment as conventional wastewater treatment cannot be effectively implemented due to toxic and intractable action of pharmaceuticals. For this reason, the existence of pharmaceutical contaminants has brought great awareness, causing significant concern on their transformation, occurrence, risk, and fate in the environments. Electrocoagulation (EC) treatment process is effectively applied for the removal of contaminants, radionuclides, pesticides, and also harmful microorganisms. During the EC process, an electric current is employed directly, and both electrodes are dissoluted partially in the reactor under the special conditions. This electrode dissolution produces the increased concentration of cation, which is finally precipitated as hydroxides and oxides. Different anode materials usage like aluminum, stainless steel, iron, etc. are found more effective in EC operation for efficient removal of pharmaceutical contaminants. Due to the simple procedure and less costly material, EC method is extensively recognized for pharmaceutical wastewater treatment over further conventional treatment methods. The EC process has more usefulness to destabilize the pharmaceutical contaminants with the neutralization of charge and after that coagulating those contaminants to produce flocs. Thus, the review places particular emphasis on the application of EC process to remove pharmaceutical contaminants. First, the operational parameters influencing EC efficiency with the electroanalysis techniques are described. Second, in this review emerging challenges, current developments and techno-economic concerns of EC are highlighted. Finally, future recommendations and prospective on EC are envisioned.

Use of a low-cost and energy-efficient device for treating low-strength wastewater at low temperatures focusing on nitrogen removal and microbial community

Treating wastewater at low temperatures has always been challenging. In this study, an anoxic filter (ANF)/multi-stage waterwheel driving rotating biological contactors (ms-wdRBCs) device was investigated as a potential solution for treatment of low-strength domestic wastewater at low temperatures (6-18 °C). Parameters, including the recirculation ratio (RR) and hydraulic retention time (HRT), were regulated to identify the optimum operating conditions. Using the optimum parameters of 200% RR, 10.67 h HRT_ANF, and 1.33 h HRT_wdRBC, 75.37% ± 4.43% COD, 44.81% ± 3.67% TN, 75.05% ±1.86% NH₄⁺-N, and 35.46% ± 4.87% TP were removed. The microbial communities in eight different sections of the device were investigated through the 16s rRNA analysis. The microbial results helped to explain the device performance. Denitrification-related bacteria were present in great abundance in both the ANF and the ms-wdRBCs. Anammox-related bacteria were also in significant abundance in ANF and some parts of ms-wdRBCs, which suggested a potential solution for improving the device performance by expanding the role of these anammox bacteria. Considering both the pollutant removal efficiency and investment costs, this device is acceptable as part of a low-strength domestic wastewater treatment solution at low temperatures.

A Tripartite Microbial-Environment Network Indicates How Crucial Microbes Influence the Microbial Community Ecology

Current technologies could identify the abundance and functions of specific microbes, and evaluate their individual effects on microbial ecology. However, these microbes interact with each other, as well as environmental factors, in the form of complex network. Determination of their combined ecological influences remains a challenge. In this study, we developed a tripartite microbial-environment network (TMEN) analysis method that integrates microbial abundance, metabolic function, and environmental data as a tripartite network to investigate the combined ecological effects of microbes. Applying TMEN to analyzing the microbial-environment community structure in the sediments of Hangzhou Bay, one of the most seriously polluted coastal areas in China, we found that microbes were well-organized into 4 bacterial communities and 9 archaeal communities. The total organic carbon, sulfate, chemical oxygen demand, salinity, and nitrogen-related indexes were detected as crucial environmental factors in the microbial-environmental network. With close interactions with these environmental factors, Nitrospirales and Methanimicrococcu were identified as hub microbes with connection advantage. Our TMEN method could close the gap between lack of efficient statistical and computational approaches and the booming of large-scale microbial genomic and environmental data. Based on TMEN, we discovered a potential microbial ecological mechanism that crucial species with significant influence on the microbial community ecology would possess one or two of the community advantages for enhancing their ecological status and essentiality, including abundance advantage and connection advantage.

Biodegradation of pharmaceuticals and personal care products in the sequential combination of activated sludge treatment and soil aquifer treatment

Soil aquifer treatment (SAT), applied after activated sludge treatment (AST), has been widely used for wastewater reclamation. AST and SAT show potential for removing micropollutants, including pharmaceuticals and personal care products (PPCPs). However, the role of sequential combination of AST and SAT on the biodegradation of PPCPs was not clear in previous studies. In this study, the removal characteristics of PPCPs in AST and SAT were evaluated to assess the legitimacy of sequential combination of AST and SAT. SAT showed effective removals of antibiotics (> 80%), including fluoroquinolones and macrolides by sorption, but poor removals of amide pharmaceuticals (i.e. carbamazepine and crotamiton) were observed in both AST and SAT. Additionally, biodegradation contributed to the effective removal of carboxylic PPCPs (i.e. ketoprofen and gemfibrozil) in both ASTs and SAT, but effective biodegradation of halogenated acid and polycyclic aromatic compounds (i.e. clofibric acid and naproxen) was observed only in SAT (82.1% and 81.8%, respectively). Furthermore, the microbial substrate metabolic patterns showed that amino acids, amines, and polymers were biodegradable in SAT, which was fit for the biodegradation characteristics of PPCPs in SAT. For microbial communities, Proteobacteria were dominant in AST and SAT, but Acidobacteria and Actinobacteria were more abundant in SAT than AST, which could contribute to the effective removals of halogenated acid in SAT. Considering PPCP biodegradation and substrate metabolism, SAT displays a wider range on the biodegradation than AST. Therefore, we conclude that these two processes can complement each other when used for controlling PPCPs.

Impacts of typical pharmaceuticals and personal care products on the performance and microbial community of a sponge-based moving bed biofilm reactor

Four lab-scale moving bed biofilm reactors (MBBRs) were built to treat simulated wastewater containing typical pharmaceuticals and personal care products (PPCPs). The efficiency in removing different PPCPs at different concentrations (1, 2 and 5 mg/L) and their effects on the performance of MBBRs were investigated. Results showed that the average removal efficiencies of sulfadiazine, ibuprofen and carbamazepine were 61.1 ± 8.8%, 74.9 ± 8.8% and 28.3 ± 7.4%, respectively. Compared to the reactor without PPCPs, the total nitrogen (TN) removal efficiency of the reactors containing sulfadiazine, ibuprofen and carbamazepine declined by 21%, 30% and 42%, respectively. Based on the microbial community analysis, increasing the PPCPs concentration within a certain range (<2 mg/L) could stimulate microbial growth and increase microbial diversity yet the diversity reduced when the concentration (5 mg/L) exceeded the tolerance of microorganisms. Furthermore the presence and degradation of different PPCPs resulted in a different kind of microbial community structure in the MBBRs.

Direct current triggering enhanced anaerobic treatment of acetyl pyrimidine-containing wastewater in up-flow anaerobic sludge blanket coupled with bioelectrocatalytic system

In this study, the novel up-flow anaerobic sludge blanket coupled with bioelectrocatalytic system (UASB-BEC) was developed with the attempt to enhance treatment of acetyl pyrimidine-containing wastewater. The results revealed that higher current applied had a positive effect on acetyl pyrimidine (AP) degradation but a negative impact could be followed by the overhigh current (>1.26 A m^-3). Removal efficiencies of AP and total organic carbon (TOC) were as high as 96.3 ± 2.6% and 92.9 ± 3.2% while methane production reached up to 0.70 ± 0.03 NL-CH₄ L^-1-reactor d^-1 at applied current of 1.26 A m^-3, which were significantly higher those in control system. Moreover, high-throughput 16S rRNA gene pyrosequencing further indicated that Desulfovibrio and Methanimicrococcus species were specially enriched in suspended sludge and cathodic biofilm with current involvement. It could be reasonably speculated that enrichment of Desulfovibrio and Methanimicrococcus species could promote biotransformation of AP and final H₂-depended methylotrophic methanogenesis. This study could shed light on better understanding of AP transformation in bioelectrocatalytic system and provide a valuable reference to practical application of anaerobic AP-containing wastewater treatment.

Is there a Function for a Sex Pheromone Precursor?

Functional coupling and comparative genomics analysis have been applied to study functional associations of orthologs of enterococcal cAD1 sex pheromone (P13268) known to be responsible for biofilm formation, conjugative plasmid transfer and spreading of bacterial antibiotics resistance. cAD1 peptide pheromone is released from the membrane lipoprotein with the peptide precursor encoded by a gene cad (tr|C2JQE7). Our analysis of genomic neighbourhood of cad and motifs of the encoded polypeptide and its orthologs suggests a close functional association between cAD1 and ApbE protein (Q82Z24), a FMN insertion and trafficking facilitator. The cad and apbE orthologs were coupled in the genomes and ApbE-specific motifs for FMN covalent attachment were identified in cad-encoded protein sequence and its orthologs. These findings suggest a potential role of FMN-based reductase function of the cAD1 lipoprotein precursor in its processing and release of the active sex pheromone peptide. They may lead to a new approach in prevention of antibiotic resistance spread via targeting sex pheromone processing chaperones or by suppression of the FMN availability and covalent binding. This methods can be also applied to a controlled evolution of bacterial pathogenicity in microbial fuel cells, as the findings suggest the crosstalk between bacterial pathogenicity and bacterial electro-activity.

Bacterial community shift and antibiotics resistant genes analysis in response to biodegradation of oxytetracycline in dual graphene modified bioelectrode microbial fuel cell

This study explored the biodegradation mechanisms of oxytetracycline (OTC/O) and electrochemical characteristics from the perspective of bacterial community shift and OTC resistance genes in dual graphene modified bioelectrode microbial fuel cell (O-D-GM-BE MFC). In phylum level, Proteobacteria was accounted to 95.04% in O-GM-BA, Proteobacteria and Bacteroidetes were accounted to 59.13% and 20.52% in O-GM-BC, which were beneficial for extracellular electron transport (EET) process and OTC biodegradation. In genus level, the most dominant bacteria in O-GM-BA were Salmonella and Trabulsiella, accounting up to 83.04%, moreover, representative exoelectrogens (Geobacter) were enriched, which contributed to OTC biodegradation and electrochemical performances; abundant degrading bacteria (Moheibacter, Comamonas, Pseudomonas, Dechloromonas, Nitrospira, Methylomicrobium, Pseudorhodoferax, Thiobacillus, Mycobacterium) were enriched in O-GM-BC, which contributed to the maximum removal efficiency of OTC; coding resistance genes of efflux pump, ribosome protective protein and modifying or passivating were all found in O-GM-BE, and this explained the OTC removal mechanisms from gene level.

Comprehensive insights into the key components of bacterial assemblages in pharmaceutical wastewater treatment plants

Due to complexity and variety of pharmaceutical wastewater composition, little is known as for functionally important microflora of pharmaceutical wastewater treatment plants (pWWTPs). We compared bacterial composition and diversity of pWWTPs (27 sludge samples collected from 12 full-scale pWWTPs) with those of other industrial (iWWTPs) (27 samples) and municipal wastewater treatment plants (mWWTPs) (27 samples) through meta-analysis based on 16S rRNA gene amplicon sequencing, and identified putatively important organisms and their ecological correlations. Non-metric multidimensional scaling indicated that the pWWTPs, iWWTPs and mWWTPs showed distinctive differences in bacterial community composition (P < 1e-04), and the pWWTPs had significantly lower bacterial diversity than the mWWTPs (P < 1e-06). Thermotogae and Synergistetes phyla only strictly dominated in the pWWTPs, and 26, 30 and 6 specific genera were identified in the pWWTPs, mWWTPs and iWWTPs, respectively. Totally, 15 and 1300 OTUs were identified as core and occasional groups, representing 23.2% and 66.2% of the total read abundance of the pWWTPs, respectively. Permutational multivariate analysis of variance revealed that the bacterial components were clearly clustered corresponding to the types of pharmaceutical wastewater, and a total of 129 local specific OTUs were identified in the pWWTPs, among which anticancer antibiotics pWWTPs had the highest number of specific OTUs (40 ones). Co-occurrence network revealed that the species dominating in the same type of pWWTPs tended to co-occur much more frequently than theoretical random expectation. The results may extend our knowledge regarding the ecological status and correlation of the key microflora in pWWTPs.

Performance and kinetic model of degradation on treating pharmaceutical solvent wastewater at psychrophilic condition by a pilot-scale anaerobic membrane bioreactor

A pilot-scale anaerobic membrane bioreactor (AnMBR) was operated for 435 days in this study, aiming to treat pharmaceutical solvent wastewater containing m-Cresol (MC), isopropanol (IPA) and N,N-Dimethylformamide (DMF) pollutants at different temperatures of 35 ± 3 °C, 25 ± 3 °C, 15 ± 3 °C and 25 ± 3 °C, respectively. The reactor reached average total removal efficiencies of about 96%, 97.2% and 98% of MC, IPA and DMF at psychrophilic condition (15 ± 3 °C). Higher physical removal rate was obtained at 15 ± 3 °C due to the important contribution of membrane filtration. At this stage, the biogas production, methane content and specific methanogenic activity and extracellular polymeric substances of suspended sludge were observed with the lowest level. Moreover, the kinetic models for solvent degradation were established at different temperatures, results showed the smaller maximum specific substrate degradation rate of MC and IPA, besides, the lowest degradation rate of three solvents were obtained at 15 ± 3 °C.

Entrapped biomass for removal of organics and total nitrogen from anaerobic reactor effluents

Anaerobic processes have been applied to treat low-strength domestic wastewaters with significant energy saving. However, anaerobic process effluents must be further removed of residual organics and total nitrogen before discharge. Reported here are an aerobic entrapped bio-technology (EBT) system and an EBT coupled with activated sludge (EBT + AS) system being tested as a post-anaerobic treatment. Both systems have been operated under aerobic condition to provide organics and total nitrogen removal, achieving COD removal by 74-88% and TN removal by 58-65% at hydraulic retention times of 8-24 h. ΔCOD/ΔNO₃ ratios that represent the carbon usage efficiency as electron donors for denitrification were 1.82-1.93 in the EBT and 2.01-2.02 in the EBT + AS systems, with both ratios being lower (i.e. more efficient) than 6 typically required in traditional activated sludge bioreactors. Both systems demonstrate promise for polishing removal of COD and TN.

Polytetrafluoroethylene (PTFE) hollow fiber AnMBR performance in the treatment of organic wastewater with varying salinity and membrane cleaning behavior

PTFE hollow fiber anaerobic membrane bio-reactor (AnMBR) performance was investigated in the treatment of organic wastewater, with varying salinity and PTFE membrane cleaning behavior. The AnMBR was operated for 226 days, with a total and biological COD removal efficiency of 97.2% and 89.9% respectively, at a NaCl concentration of 35 g L^-1. A high number of Proteobacteria (38.2%) and Bacteroidetes (25.9%) were present in the system, with an increase in membrane fouling rate from 1.88 × 10¹¹ to 2.63 × 10¹¹ m^-1 d^-1 with higher salinity. The effects of soluble microbial products (SMP), extracellular polymeric substances (EPS), low molecular-weight (LMW) carbohydrates, sludge particle size and inorganic element accumulation, were evaluated on membrane fouling. Flux recovery of fouled PTFE membranes reached 91.6% with offline cleaning. Overall, results indicate that PTFE hollow fiber AnMBR provides a promising method for the treatment of saline organic wastewater.

Intensified nutrients removal in constructed wetlands by integrated Tubifex tubifex and mussels: Performance and mechanisms

The synergy of Tubifex tubifex (T. tubifex) and mussels on SFCWs (named SFCW-MT) performance was well studied in laboratory throughout a year. The SFCW-MT were steady operated with high TN and TP treatment, with the removal efficiencies of 37.85 ± 5.22% and 39.26 ± 5.20% even in winter. The mussels had excellent NH₄-N removal efficiency, and avoid the shortage of NH₄-N removal with T. tubifex in winter. Simultaneously, the SFCW-MT improved the NO₃-N treatment by 51% than that in control group. The plant growth was improved in SFCW-MT, which reflected in the improvement of total chlorophyll contents and plant heights. The N and P absorbed by wetland plants and adsorbed by substrate were both increased with mussels. Microbial analysis results revealed that, the mussels could keep the abundance of nitrifiers despite the negative effect of T. tubifex. On that basis, the improved proportions of denitrifiers (Firmicutes) have a significantly recognized role in NO₃-N transformation in SFCW-MT. The gut and membrane sections of mussels, as well as T. tubifex, also has proportions of denitrifiers and part of nitrifiers, and thus changed the microbial community in substrate. This evidence indicated that the co-existence of T. tubifex and mussels have potential application for simultaneous removal of NH₄-N and NO₃-N in CWs.

Biogas production and microbial community properties during anaerobic digestion of corn stover at different temperatures

Temperature has different effects on anaerobic digestion (AD) of various biomasses, which could bring out changes in microbial communities. The relationship between microbial community and methane production at 35 °C (R35), 38 °C (R38), 41 °C (R41), and 44 °C (R44) was analyzed during AD of corn stover (CS). The results showed that the daily biogas and methane production from R44 were 16.6%-42.4% and 16.2%-40.6% higher than yields from R35, R38 and R41, respectively. The abundance of Bacteroidetes in R35, R38 and R41 was relatively close (30.70%-39.36%), which was low in R44 (16.00%). The abundance of Firmicutes in R35 was 32.30%, however, Firmicutes was the most dominant phylum at R44 (66.58%). The abundance of Miscellaneous_Crenarchaeotic_Group and Euryarchaeota were 54.63 ± 6.47% and 44.43 ± 6.73% across all digesters. This research demonstrated that among all temperatures studied, 44 °C could enhance the conversion efficiency of the substrates to methane and be recommended for better conversion of CS in AD process.

Evaluation of phase separation in a single-stage vertical anaerobic reactor: Performance and microbial composition analysis

In order to explore whether the acidogenic phase and methanogenic phase could be separated vertically into a single-stage anaerobic reactor, a controlled double circulation (CDC) anaerobic reactor was proposed for treating traditional Chinese medicine (TCM) wastewater in this study. The results showed that most of the organic pollutants and refractory were removed in the first reaction area where most of the amount of sludge existed. The organic acids were accumulated in the first reaction area, and larger specific methanogenic activity (SMA) and coenzyme F₄₂₀ values were found in the second reaction area. Bacterial and archaeal community structures in the two reaction areas of the CDC reactor were analyzed by Illumina MiSeq Sequencing, which revealed that the archaeal community showed larger difference compared with the bacterial community. Differences in the performance and microbial composition of the two reaction areas confirmed that phase separation was implemented in the CDC reactor.

Enhanced nitrogen removal from electroplating tail wastewater through two-staged anoxic-oxic (A/O) process

Consisted of anaerobic (ANA), anoxic-1 (AN1), aerobic-1 (AE1), anoxic-2 (AN2), aerobic-2 (AE2) reactors and sediment tank, the two-staged A/O process was applied for depth treatment of electroplating tail wastewater with high electrical conductivity and large amounts of ammonia nitrogen. It was found that the NH₄⁺-N and COD removal efficiencies reached 97.11% and 83.00%, respectively. Besides, the short-term salinity shock of the control, AE1 and AE2 indicated that AE1 and AE2 have better resistance to high salinity when the concentration of NaCl ranged from 1 to 10g/L. Meanwhile, it was found through high-throughput sequencing that bacteria genus Nitrosomonas, Nitrospira and Thauera, which are capable of nitrogen removal, were enriched in the two-staged A/O process. Moreover, both salt-tolerant bacteria and halophili bacteria were also found in the combined process. Therefore, microbial community within the two-staged A/O process could be acclimated to high electrical conductivity, and adapted for electroplating tail wastewater treatment.

Anaerobic treatment of pharmaceutical wastewater: A critical review

Pharmaceutical wastewaters are usually produced by chemical-synthetic process, and thus contain high levels of organic pollutants, biotoxicity and salinity. Anaerobic technology is a viable option for treating pharmaceutical wastewater owing to its advantages of withstanding high organic-loading, less sludge production and lower operating cost as compared with conventional activated sludge process. In this paper, several types of modern anaerobic or hybrid systems were reviewed on their pollutant reduction performance and operating conditions for treating pharmaceutical wastewater. Meanwhile, the typical predominant microbial populations found in anaerobic process treating pharmaceutical wastewater were summarized. Moreover, the environmental impact of antibiotic residues and health risk of spreading of antibiotic resistant genes (ARGs) were also assessed to offer an in-depth understanding of the growing concern on the discharge of treated pharmaceutical effluent.

Microbial community composition and function in a pilot-scale anaerobic-anoxic-aerobic combined process for the treatment of traditional Chinese medicine wastewater

Biodegradation of traditional Chinese medicine (TCM) wastewater was investigated in a pilot-scale anaerobic-anoxic-aerobic combined process, which was composed of an expanded granular sludge blanket (EGSB) reactor, a hydrolysis acidification (HA) reactor and a biological contact oxidation (BCO) reactor. In stable stage, the average values of COD and color in the combined process effluent were 45.7mgL^-1 and 13 times, respectively. Excellent linear relations (R²>0.915) were achieved between color and UV₂₅₄ at three color levels. Comprehensive community structures of the combined process were analysed by Illumina MiSeq Sequencing, which revealed that microbial community in the aerobic reactor had the greatest diversity and richness. Bacteroidetes, Firmicutes and Proteobacteria were dominant phyla in the three reactors, and Bacteroidales, Geobacter, ZB2 were the predominant functional microorganisms in the anaerobic, anoxic and aerobic reactors, respectively. Good removal efficiencies and presence of core microorganisms confirmed that the combined process was feasible for treating TCM wastewater.

Microbial community analysis of bulk sludge/cake layers and biofouling-causing microbial consortia in a full-scale aerobic membrane bioreactor

Pyrosequencing was used to investigate biofouling-causing microbial consortia at the community level in bulk sludge and cake layers within a full-scale membrane bioreactor (MBR). The analysis revealed Chao's estimates of total operational taxonomic units (OTUs) of 1726, 1806, and 1362 for bulk sludge, cake outer layer, and cake inner layer, respectively. The bulk sludge and cake outer layer OTUs clustered together, whereas the cake inner layer OTUs formed a separate group, indicating that environmental conditions affected the microbial community composition within the MBR. Bacteroidetes, Proteobacteria, and Chloroflexi were the dominant phyla in both the bulk sludge and the cake layers. Comparison at the genus level showed twelve distinct genera in the cake layers that were absent in bulk sludge. Twenty distinct genera were recorded in the inner cake layer. Those genera are likely the microbial colonization pioneers in full-scale membrane bioreactors.

Review on fate and mechanism of removal of pharmaceutical pollutants from wastewater using biological approach

Due to research advancement and discoveries in the field of medical science, maintains and provides better human health and safer life, which lead to high demand for production of pharmaceutical compounds with a concomitant increase in population. These pharmaceutical (biologically active) compounds were not fully metabolized by the body and excreted out in wastewater. This micro-pollutant remains unchanged during wastewater treatment plant operation and enters into the receiving environment via the discharge of treated water. Persistence of pharmaceutical compounds in both surface and ground waters becomes a major concern due to their potential eco-toxicity. Pharmaceuticals (emerging micro-pollutants) deteriorate the water quality and impart a toxic effect on living organisms. Therefore, from last two decades, plenty of studies were conducted on the occurrence, impact, and removal of pharmaceutical residues from the environment. This review provides an overview on the fate and removal of pharmaceutical compounds via biological treatment process.