Constructing xylose-assimilating pathways in Pediococcus acidilactici for high titer d-lactic acid fermentation from corn stover feedstock

Advances and new horizons in metabolic engineering of heterotrophic bacteria and cyanobacteria for enhanced lactic acid production

Bacteria species such as E.Coli, Lactobacilli, and pediococci play an important role as starter strains in fermentation food or polysaccharides into lactic acid. These bacteria were metabolically engineered using multiple proven genome editing methods to enhance relevant phenotypes. The efficacy of these procedures varies depending on the editing tool used and researchers' ability to pick suitable recombinants, which significantly increased genome engineering throughput. Cyanobacteria produce oxygenic photosynthesis and play an important role in carbon dioxide fixing. The fixed carbon dioxide is then retained as polysaccharides in cells and metabolised into various low carbon molecules such as lactate, succinate, and ethanol. Lactate is used as a building ingredient in various bioplastics, food additives, and medicines. This review covers the recent advances in lactic acid production through metabolic and genetic engineering in bacteria and cyanobacteria.

Carbon catabolite repression during the simultaneous utilization of lignocellulose-derived sugars in lactic acid production: Influencing factors and mitigation strategies

Lignocellulose is the most abundant, sustainable, and comparatively economical renewable biomass containing ample fermentable sugars for bio-based chemical production, such as lactic acid (LA). LA is a versatile chemical with substantial global demand. However, the concurrent utilization of mixed sugars derived from lignocellulose, including glucose, xylose, and arabinose, remains a formidable challenge because of the metabolic regulation of carbon catabolite repression (CCR), in which glucose is preferentially utilized over non-glucose sugars, resulting in the loss of carbon resources and a decrease in biorefinery efficacy. Most current studies on CCR have concentrated on elucidating the principles and their impact on specific bacterial species using mixed carbon sources. However, there remains a notable dearth of comprehensive reviews summarizing the underlying principles and corresponding mitigation strategies across other bacterial strains encountering similar challenges. In light of this, this article delineates the possible factors that lead to CCR, including signal transduction and metabolic pathways. Additionally, the fermentation conditions and nutrients are described. Finally, this study proposes appropriate mitigation strategies to overcome the aforementioned obstacles and presents new insights into the rapid and simultaneous consumption of mixed sugars to bolster the production yields of biofuels and chemicals in the future.

From agricultural biomass to D form lactic acid in ton scale via strain engineering of Lactiplantibacillus pentosus

Worsening environmental conditions make lactic acid a sustainable alternative to petroleum-based plastics. This study created a genetically-engineered strain Lactiplantibacillus pentosus PeL containing a disrupted L-lactate dehydrogenase gene to produce high yield and optically pure D-lactic acid. Cellobiose was identified as the optimal sugar in the single carbon source test, yielding the highest lactic acid. In 5-L fermentation tests, pretreated wood chips hydrolysate was the best lignocellulosic substrate for PeL, resulting in a D-lactic acid yield of 900.7 ± 141.4 mg/g of consumed sugars with an optical purity of 99.8 ± 0.0 %. Gradually scaled-up fermentations using this substrate were achieved in 100-, and 9,000-L fermenters; PeL produced remarkably high D-lactic acid yields of 836.3 ± 11.9 and 915.9 ± 4.4 mg/g of consumed sugars, with optical purities of 95.0 ± 0.0 % and 93.8 ± 0.2 %, respectively. This study is the pioneer in demonstrating economical and sustainable ton-scale production of D-lactic acid.

Development and evaluation of immunological effects of a DNA vaccine encoding phosphoketolase family protein against Nocardia seriolae in hybrid snakehead

Fish nocardiosis is a chronic disease mainly caused by Nocardia seriolae, which occurs in a variety of economically cultured freshwater and marine fish. Studies have shown that DNA vaccine is an effective treatment to protect fish from bacterial infection. In our previous experiment, an in vivo-induced gene of N. seriolae, encoding phosphoketolase (PK) family protein, was identified by in vivo-induced antigen technology. In the present study, the antigenic gene encoding PK family protein was analyzed by bioinformatics and further inserted into the eukaryotic expression vector pcDNA3.1-myc-his-A for DNA vaccine development. The immunological effects of pcDNA-PK DNA vaccine were assessed in hybrid snakehead (Channa maculata ♀ × Channa argus ♂), showing induction in several serum enzyme activity parameters (including LZM, SOD, ACP and AKP), increasing in specific-antibody IgM levels, as well as up-regulation in six immune-related genes (CD4, CD8α, TNFα, IL-1β, MHCIα and MHCIIα). Moreover, an immune-protection with a relative survival rate was provided at 53.82 % following artificial challenge with N. seriolae in vaccinated fish in comparison to the control group. In summary, these results indicate that pcDNA-PK DNA vaccine could boost strong immune responses in hybrid snakehead and show preferably protective efficacy against N. seriolae, which may be applied in aquaculture to control fish nocardiosis.

Third-generation D-lactic acid production using red macroalgae Gelidium amansii by co-fermentation of galactose, glucose and xylose

Macroalgae biomass has been considered as a promising renewable feedstock for lactic acid production owing to its lignin-free, high carbohydrate content and high productivity. Herein, the D-lactic acid production from red macroalgae Gelidium amansii by Pediococcus acidilactici was investigated. The fermentable sugars in G. amansii acid-prehydrolysate were mainly galactose and glucose with a small amounts of xylose. P. acidilactici could simultaneously ferment the mixed sugars of galactose, glucose and xylose into D-lactic acid at high yield (0.90 g/g), without carbon catabolite repression (CCR). The assimilating pathways of these sugars in P. acidilactici were proposed based on the whole genome sequences. Simultaneous saccharification and co-fermentation (SSCF) of the pretreated and biodetoxified G. amansii was also conducted, a record high of D-lactic acid (41.4 g/L) from macroalgae biomass with the yield of 0.34 g/g dry feedstock was achieved. This study provided an important biorefinery strain for D-lactic acid production from macroalgae biomass.

Screening and Constructing a Library of Promoter-5'-UTR Complexes with Gradient Strength in Pediococcus acidilactici

The GRAS (generally recognized as safe) strain Pediococcus acidilactici is well known for its antibacterial and probiotic functions. Furthermore, as P. acidilactici has excellent high temperature and salt resistance, it is an ideal host for the production of food enzymes, food additives, and pharmaceuticals. In this regard, it is desirable and feasible to enhance the production of these products through the metabolic engineering of P. acidilactici. However, the rare gene expression elements greatly obstruct the development of engineering P. acidilactici. In this study, we screened and constructed a library of promoter-5'-UTR (PUTR) complexes in P. acidilactici DY15 for regulating gene expression at the transcription and translation levels. In the post-log phase, the mRNA and protein expression level ranges of the 90 screened native PUTRs were 0.059-2010% and 0.77-245%, respectively, of the P32 promoter. Besides, several PUTRs exhibited great expression stability under high temperature, salt, and ethanol stress. We analyzed the structure of PUTRs and obtained the conserved regions of the promoter and 5'-UTR. Based on the identified core regions of PUTRs, we constructed a panel of combinatorial PUTRs with higher and stable protein expression levels. The strongest combinatorial PUTR was 853% of the P32 promoter in the protein expression level. Finally, the obtained PUTRs were applied to optimize the expression level of aminotransferase and improve the phenyllactic acid (PLA) production in P. acidilactici DY15. The achieved yield was 950.6 mg/L, which was 79.2% higher than the wild-type strain. These results indicated that the obtained PUTRs with gradient strength had great potential for precisely regulating gene expression to achieve various goals in P. acidilactici.

Simultaneous and rate-coordinated conversion of lignocellulose derived glucose, xylose, arabinose, mannose, and galactose into D-lactic acid production facilitates D-lactide synthesis

D-lactide is the precursor of poly(D-lactide) (PDLA) or stereo-complex with poly(L-lactide) (PLLA). Lignocellulosic biomass provides the essential feedstock option to synthesize D-lactic acid and D-lactide. The residual sugars in D-lactic acid fermentation broth significantly blocks the D-lactide synthesis. This study showed a simultaneous and rate-coordinated conversion of lignocellulose derived glucose, xylose, arabinose, mannose, and galactose into D-lactic acid by adaptively evolved Pediococcus acidilactici ZY271 by simultaneous saccharification and co-fermentation (SSCF) of wheat straw. The produced D-lactic acid achieved minimum residual sugars (∼1.7 g/L), high chirality (∼99.1%) and high titer (∼128 g/L). A dry acid pretreatment eliminated the wastewater stream generation and the biodetoxification by fungus Amorphotheca resinae ZN1 removed the inhibitors from the pretreatment. The removal of the sugar residues and inhibitor impurities in D-lactic acid production from lignocellulose strongly facilitated the D-lactide synthesis. This study filled the gap in cellulosic D-lactide production from lignocellulose-derived D-lactic acid.

Co-expression of Xylose Transporter and Fructose-Bisphosphate Aldolase Enhances the Utilization of Xylose by Lactococcus lactis IO-1

The raw material cost of lactic acid fermentation accounts for the main part of the production cost, and this necessitates the exploration of the efficient use of cheap raw materials in lactic acid production. We compared the outcomes of the homologous expressions of xylose transporters (xylFGH, xylE, araE, and xylT), 6-phosphofructokinase (pfkA), fructose-bisphosphate aldolase (fbaA), and their co-expression in Lactococcus lactis IO-1 on lactic acid production using xylose as the raw material. We found that the production rate of lactic acid on xylose fermentation by L. lactis IO-1 overexpressing fbaA was the highest (14.42%). Among the xylose transporters investigated, XylT had the strongest xylose transport capacity in L. lactis IO-1, with an increase in the lactic acid production rate by 10.38%. The genes near the overexpression of fbaA or xylT in the metabolic pathway were more upregulated than the distant genes. The co-expression of fbaA and xylT increased the production rate of lactic acid by 27.84% on xylose fermentation by L. lactis IO-1. This work presents a novel strategy for the simultaneous enhancement of the expression of important genes at the beginning and midway of the xylose metabolic pathway of L. lactis IO-1, which could greatly improve the target production.

Enhanced cellulosic d-lactic acid production from sugarcane bagasse by pre-fermentation of water-soluble carbohydrates before acid pretreatment

After several rounds of milling process for sugars extraction from sugarcane, certain amounts of water-soluble carbohydrates (WSC) still remain in sugarcane bagasse. It is a bottleneck to utilize WSC in sugarcane bagasse biorefinery, since these sugars are easily degraded into inhibitors during pretreatment. Herein, a simple pre-fermentation step before pretreatment was conducted, and 98 % of WSC in bagasse was fermented into d-lactic acid. The obtained d-lactic acid was stably preserved in bagasse and 5-hydroxymethylfurfural (HMF) generation was sharply reduced from 46.0 mg/g to 6.2 mg/g of dry bagasse, after dilute acid pretreatment. Consequently, a higher d-lactic acid titer (57.0 g/L vs 33.2 g/L) was achieved from the whole slurry of the undetoxified and pretreated sugarcane bagasse by one-pot simultaneous saccharification and co-fermentation (SSCF), with the overall yield of 0.58 g/g dry bagasse. This study gave an efficient strategy for enhancing lactic acid production using the lignocellulosic waste from sugar industry.

One-pot d-lactic acid production using undetoxified acid-pretreated corncob slurry by an adapted Pediococcus acidilactici

Inhibitor tolerance is still a bottleneck for lactic acid bacteria in lignocellulose biorefinery, while it is hard to obtain one engineered strain with strong tolerance to all inhibitors. Herein, a robust adapted d-lactic acid producing strain Pediococcus acidilactici XH11 was obtained by 111 days' long-term adaptive evolution in undetoxified corncob prehydrolysates. The adapted strain had higher inhibitors tolerance compared to the parental strain, primarily due to its increased conversion capacities of four typical aldehyde inhibitors (furfural, HMF, vanillin, and 4-hydroxybenzaldehyde). One-pot simultaneous saccharification and co-fermentation was successfully achieved using the whole slurry of acid-pretreated corncob without solid-liquid separation and detoxification, by applying the adapted P. acidilactici XH11. Finally, 61.9 g/L of d-lactic acid was generated after 96 h' fermentation (xylose conversion of 89.9 %) with the overall yield of 0.48 g/g dry corncob. This study gave an important option for screening of industrial strains in cellulosic lactic acid production processes.

Metabolic Engineering for the Comprehensive Utilization of N,N-Dimethylformamide-Containing Wastewater

N, N-dimethylformamide is frequently present in industrial wastewater and is environmentally detrimental. The current study aims to assess the utilization and biodegradation of N, N-dimethylformamide-containing wastewater to lessen the associated environmental load. Results show that addition of wastewater containing N, N-dimethylformamide to Trichoderma reesei fermentation media enhances cellulase production and facilitates cellulose hydrolysis. However, N, N-dimethylformamide is a cellulase enhancer that is not degraded during cellulase production in T. reesei fermentation and is retained in the N, N-dimethylformamide-enhanced cellulase solution. Indeed, the cellulosic sugar solution generated via lignocellulose hydrolysis with N, N-dimethylformamide-enhanced cellulase retains N, N-dimethylformamide. We further identified three core enzyme modules─N, N-dimethylformamidase, dimethylamine dehydrogenase, and methylamine dehydrogenase enzyme─which were inserted into Escherichia coli to develop metabolically engineered strains. These strains degraded N, N-dimethylformamide and produced succinate using N, N-dimethylformamide-enhanced cellulosic sugar as the substrate. The platform described here can be applied to effectively convert waste into valuable bioproducts.

Bioconversion of Corn Crop Residues: Lactic Acid Production through Simultaneous Saccharification and Fermentation

Lactic acid (LA) is a chemical building block with wide applications in the food, cosmetics, and chemical industries. Its polymer polylactic acid further increases this range of applications as a green and biocompatible alternative to petrol-based plastics. Corn is the fourth largest crop in the world, and its residues represent a potentially renewable feedstock for industrial lactic acid production through simultaneous saccharification and fermentation (SSF). The main goal of this work is to summarize and compare the pretreatment methods, enzymatic formulations and microbial strains that have been combined in a SSF setup for bioconversion of corn crop residues into LA. Additionally, the main concerns of scaling-up and the innovation readiness level towards commercial implementation of this technology are also discussed. The analysis on commercial implementation renders the current state of SSF technology unsustainable, mainly due to high wastewater generation and saccharification costs. Nonetheless, there are promising strategies that are being tested and are focused on addressing these issues. The present work proves that the study and optimization of SSF as a biorefinery framework represents a step towards the adoption of potentially sustainable waste management practices.

Cyclic L-lactide synthesis from lignocellulose biomass by biorefining with complete inhibitor removal and highly simultaneous sugars assimilation

Cyclic chiral lactide is the monomer chemical for polymerization of high molecular weight polylactic acid (PLA). The synthesis of cyclic L-lactide starts from poly-condensation of L-lactic acid to a low molecular weight pre-polymer and then depolymerized to cyclic L-lactide. Lignocellulose biomass is the most promising carbohydrate feedstock for lactic acid production, but the synthesis of cyclic L-lactide from L-lactic acid produced from lignocellulose has so far not been successful. The major barriers are the impurities of residual sugars and inhibitors in the crude cellulosic L-lactic acid product. Here we show a successful cyclic L-lactide synthesis from cellulosic L-lactic acid by lignocellulose biorefining with complete inhibitor removal and coordinated sugars assimilation. The removal of inhibitors from lignocellulose pretreatment was accomplished by biodetoxification using a unique fungus Amorphotheca resinae ZN1. The non-glucose sugars were completely and simultaneously assimilated at the same rate with glucose by the engineered L-lactic acid bacterium Pediococcus acidilactici. The L-lactic acid production from wheat straw was comparable to that from corn starch with high optical pure (99.6%), high L-lactic acid titer (129.4 g/L), minor residual total sugars (~2.2 g/L), and inhibitors free. The cyclic L-lactide was successfully synthesized from the regularly purified L-lactic acid and verified by detailed characterizations. This study paves the technical foundation of carbon neutral production of biodegradable PLA from lignocellulose biomass. This article is protected by copyright. All rights reserved.

D-Lactic acid production from agricultural residues by membrane integrated continuous fermentation coupled with B vitamin supplementation

Background

d-Lactic acid played an important role in the establishment of PLA as a substitute for petrochemical plastics. But, so far, the d-lactic acid production was limited in only pilot scale, which was definitely unable to meet the fast growing market demand. To achieve industrial scale d-lactic acid production, the cost-associated problems such as high-cost feedstock, expensive nutrient sources and fermentation technology need to be resolved to establish an economical fermentation process.

Results

In the present study, the combined effect of B vitamin supplementation and membrane integrated continuous fermentation on d-lactic acid production from agricultural lignocellulosic biomass by Lactobacillus delbrueckii was investigated. The results indicated the specific addition of vitamins B₁, B₂, B₃ and B₅ (VB₁, VB₂, VB₃ and VB₅) could reduce the yeast extract (YE) addition from 10 to 3 g/l without obvious influence on fermentation efficiency. By employing cell recycling system in 350 h continuous fermentation with B vitamin supplementation, YE addition was further reduced to 0.5 g/l, which resulted in nutrient source cost reduction of 86%. A maximum d-lactate productivity of 18.56 g/l/h and optical purity of 99.5% were achieved and higher than most recent reports.

Conclusion

These findings suggested the novel fermentation strategy proposed could effectively reduce the production cost and improve fermentation efficiency, thus exhibiting great potential in promoting industrial scale d-lactic acid production from lignocellulosic biomass.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02124-y.

High d-lactic acid productivity is achieved by L. delbrueckii from rice straw.

B vitamins are satisfied substitute of yeast extract for d-lactic acid fermentation.

A process of membrane-integrated continuous fermentation with B vitamin is developed.

High fermentation efficiency is achieved by the novel fermentation process.

L-Lactate oxidase-mediated removal of L-lactic acid derived from fermentation medium for the production of optically pure D-lactic acid

BACKGROUND

There has been an increasing demand for optically pure D-lactic and L-lactic acid for the production of stereocomplex-type polylactic acid. The D-lactic acid production from lignocellulosic biomass is important owing to its great abundance in nature. Corn steep liquor (CSL) is a cheap nitrogen source used for industrial fermentation, though it contains a significant amount of L-lactic acid, which decreases the optical purity of D-lactic acid produced.

METHOD AND RESULTS

To remove L-lactic acid derived from the CSL-based medium, L-lactate oxidase (LoxL) from Enterococcus sp. NBRC 3427 was expressed in an engineered Lactiplantibacillus plantarum (formally called Lactobacillus plantarum) strain KOLP7, which exclusively produces D-lactic acid from both hexose and pentose sugars. When the resulting strain was applied for D-lactic acid fermentation from the mixed sugars consisting of the major constituent sugars of lignocellulose (35 g/L glucose, 10 g/L xylose, and 5 g/L arabinose) using the medium containing 10 g/L CSL, it completely removed L-lactic acid derived from CSL (0.52 g/L) and produced 41.7 g/L of D-lactic acid. The L-lactic acid concentration was below the detection limit, and improvement in the optical purity of D-lactic acid was observed (from 98.2% to > 99.99%) by the overexpression of LoxL.

CONCLUSION AND IMPLICATIONS

The LoxL-mediated consumption of L-lactic acid would enable the production of optically pure D-lactic acid in any medium contaminated by L-lactic acid. This article is protected by copyright. All rights reserved.

Contribution of Fermentation Technology to Building Blocks for Renewable Plastics

Large-scale worldwide production of plastics requires the use of large quantities of fossil fuels, leading to a negative impact on the environment. If the production of plastic continues to increase at the current rate, the industry will account for one fifth of global oil use by 2050. Bioplastics currently represent less than one percent of total plastic produced, but they are expected to increase in the coming years, due to rising demand. The usage of bioplastics would allow the dependence on fossil fuels to be reduced and could represent an opportunity to add some interesting functionalities to the materials. Moreover, the plastics derived from bio-based resources are more carbon-neutral and their manufacture generates a lower amount of greenhouse gasses. The substitution of conventional plastic with renewable plastic will therefore promote a more sustainable economy, society, and environment. Consequently, more and more studies have been focusing on the production of interesting bio-based building blocks for bioplastics. However, a coherent review of the contribution of fermentation technology to a more sustainable plastic production is yet to be carried out. Here, we present the recent advancement in bioplastic production and describe the possible integration of bio-based monomers as renewable precursors. Representative examples of both published and commercial fermentation processes are discussed.

Valorisation of xylose to renewable fuels and chemicals, an essential step in augmenting the commercial viability of lignocellulosic biorefineries

Biologists and engineers are making tremendous efforts in contributing to a sustainable and green society. To that end, there is growing interest in waste management and valorisation. Lignocellulosic biomass (LCB) is the most abundant material on the earth and an inevitable waste predominantly originating from agricultural residues, forest biomass and municipal solid waste streams. LCB serves as the renewable feedstock for clean and sustainable processes and products with low carbon emission. Cellulose and hemicellulose constitute the polymeric structure of LCB, which on depolymerisation liberates oligomeric or monomeric glucose and xylose, respectively. The preferential utilization of glucose and/or absence of the xylose metabolic pathway in microbial systems cause xylose valorization to be alienated and abandoned, a major bottleneck in the commercial viability of LCB-based biorefineries. Xylose is the second most abundant sugar in LCB, but a non-conventional industrial substrate unlike glucose. The current review seeks to summarize the recent developments in the biological conversion of xylose into a myriad of sustainable products and associated challenges. The review discusses the microbiology, genetics, and biochemistry of xylose metabolism with hurdles requiring debottlenecking for efficient xylose assimilation. It further describes the product formation by microbial cell factories which can assimilate xylose naturally and rewiring of metabolic networks to ameliorate xylose-based bioproduction in native as well as non-native strains. The review also includes a case study that provides an argument on a suitable pathway for optimal cell growth and succinic acid (SA) production from xylose through elementary flux mode analysis. Finally, a product portfolio from xylose bioconversion has been evaluated along with significant developments made through enzyme, metabolic and process engineering approaches, to maximize the product titers and yield, eventually empowering LCB-based biorefineries. Towards the end, the review is wrapped up with current challenges, concluding remarks, and prospects with an argument for intense future research into xylose-based biorefineries.

The advanced performance of microbial consortium for simultaneous utilization of glucose and xylose to produce lactic acid directly from dilute sulfuric acid pretreated corn stover

BACKGROUND

Lignocellulosic feedstocks have attracted much attention as a potential carbon source for lactic acid (LA) production because of their ready availability, sustainability, and renewability. However, there are at least two major technical challenges to producing LA from lignocellulose. Inhibitors derived from lignocellulose pretreatment have a negative impact on the growth of cells producing LA. Furthermore, pentose sugars produced from the pretreatment are difficultly utilized by most LA producers, which is known as the carbon catabolite repression (CCR) effect. This complex feedstock can be utilized by a robust microbial consortium with high bioconversion efficiency.

RESULTS

In this study, a thermophilic consortium DUT50 producing LA was enriched and employed to improve corn stover (CS) utilization. Enterococcus was the dominant family in the consortium DUT50, accounting for 93.66% of the total abundance, with Lactobacillus, Bacillus, Lactococcus, and Trichococcus accounted for the remaining 2.68%. This consortium could be resistant to inhibitors concentration up to 9.74 g/L (2.88 g/L acetic acid, 2.46 g/L furfural, 2.20 g/L 5-HMF, and 2.20 g/L vanillin derived from pretreatment of CS), and simultaneously metabolizes hexose and pentose without CCR effect. Based on the promising consortium features, an efficient process of simultaneous saccharification and co-fermentation (SSCF) was developed to produce LA from acid pretreated corn stover, in which solid-liquid separation and detoxification were avoided. The key influencing factors were investigated and optimized, including dry biomass and cellulase loading, corn steep liquor powder concentration, and the pre-hydrolysis time. The highest LA titer of 71.04 g/L with a yield of 0.49 g/g-CS was achieved at a dry biomass loading of 20% (w/v), which is the highest LA production from non-detoxified acid pretreated corn stover via the SSCF process without wastewater generation reported to date. The simultaneous metabolism of hexose and pentose revealed collaboration between Enterococcus in the consortium, whereas xylose may be efficiently metabolized by Lactobacillus and Bacillus with low abundance via the pentose phosphate pathway.

CONCLUSIONS

The experimental results demonstrated the potential advantage of symbiosis in microbial consortia used for LA production from lignocellulosic biomass.

Paradigm shift in xylose isomerase usage: a novel scenario with distinct applications

Isomerases are enzymes that induce physical changes in a molecule without affecting the original molecular formula. Among this class of enzymes, xylose isomerases (XIs) are the most studied to date, partly due to their extensive application in industrial processes to produce high-fructose corn sirups. In recent years, the need for sustainable initiatives has triggered efforts to improve the biobased economy through the use of renewable raw materials. In this context, D-xylose usage is crucial as it is the second-most abundant sugar in nature. The application of XIs in biotransforming xylose, enabling downstream metabolism in several microorganisms, is a smart strategy for ensuring a low-carbon footprint and producing several value-added biochemicals with broad industrial applications such as in the food, cosmetics, pharmaceutical, and polymer industries. Considering recent advancements that have expanded the range of applications of XIs, this review provides a comprehensive and concise overview of XIs, from their primary sources to the biochemical and structural features that influence their mechanisms of action. This comprehensive review may help address the challenges involved in XI applications in different industries and facilitate the exploitation of xylose bioprocesses.

Recent Advances in Lactic Acid Production by Lactic Acid Bacteria

Lactic acid can synthesize high value-added chemicals such as poly lactic acid. In order to further minimize the cost of lactic acid production, some effective strategies (e.g., effective mutagenesis and metabolic engineering) have been applied to increase productive capacity of lactic acid bacteria. In addition, low-cost cheap raw materials (e.g., cheap carbon source and cheap nitrogen source) are also used to reduce the cost of lactic acid production. In this review, we summarized the recent developments in lactic acid production, including efficient strain modification technology (high-efficiency mutagenesis means, adaptive laboratory evolution, and metabolic engineering), the use of low-cost cheap raw materials, and also discussed the future prospects of this field, which could promote the development of lactic acid industry.

Optically pure lactic acid production from softwood-derived mannose by Pediococcus acidilactici

Softwood is of interest as a renewable carbon source for production of lactic acid. Softwood hydrolysate contains a high content of mannose. Lactic acid production from mannose by two modified strains, _L-lactic acid producing Pediococcus acidilactici TY112 and _D-lactic acid producing ZP26, was investigated in the current work. The two strains efficiently converted mannose to _L- and _D-lactate isomers with an optical purity exceeding 99 %, although the mannose utilization rates were lower than the glucose utilization rates. The mannose conversion to _L- and _D-lactic acids by P. acidilactici was also confirmed in dilute spruce hemicellulose hydrolysate. The present study provides important knowledge on utilization of the spectrum of fermentable sugars in softwood for future production of chiral lactic acid from lignocellulose feedstocks.

Ethylene glycol based acid pretreatment of corn stover for cellulose enzymatic hydrolysis

A highly efficient pretreatment strategy using ethylene glycol with dilute sulfuric acid was developed for the fractionation of lignocellulose. The pretreatment behaviors were related to the composition analysis and structure of the samples analyzed by SEM, XRD, FTIR and 2D HSQC NMR, resulting in 80.3% delignification and 84.7% retention of cellulose under the selected conditions (120 °C, 60 min, and 0.6 wt% H2SO4 (w/w)). The enzymatic hydrolysis sugar yield significantly increased from 24.1 to 70.6% (3 FPU g-1), which displayed immense improvement compared with untreated corn stover (24.1%), nearly 3-fold higher than its untreated counterparts. Besides, the regenerated lignin could be fitted to valorize renewable aromatic chemicals and alkane fuels. The present study shows that the pretreatment is a simple, efficient and promising process for corn stover biorefinery.

Increasing sodium lactate production by enhancement of Na+ transmembrane transportation in Pediococcus acidilactici

Fermentative production of sodium lactate generally is a low efficient process because of the high Na⁺ osmatic stress on lactic acid bacterium cells. In this study, the homogeneous genes encoding Na⁺/H⁺ antiporters were screened and overexpressed in Pediococcus acidilactici for the enhancement of Na⁺ transmembrane transportation. The function of the gene RS02775 was identified and its overexpressing in P. acidilactici resulted in the significantly improved sodium lactate production. The recombinant not only accelerated the sugar consumption, but also achieved the record high titer of sodium lactate by 121.1 g/L using pure sugars and 132.4 g/L using wheat straw. The transcription analysis shows that the overexpression of Na⁺/H⁺ antiporter significantly upregulated the transcription of the sugar phosphorylation genes of P. acidilactici under high Na⁺ stress. This study provides an effective method for high titer production of sodium lactate using both pure sugars and lignocellulose feedstocks.

Lactic acid production - producing microorganisms and substrates sources-state of art

Lactic acid is an organic compound produced via fermentation by different microorganisms that are able to use different carbohydrate sources. Lactic acid bacteria are the main bacteria used to produce lactic acid and among these, Lactobacillus spp. have been showing interesting fermentation capacities. The use of Bacillus spp. revealed good possibilities to reduce the fermentative costs. Interestingly, lactic acid high productivity was achieved by Corynebacterium glutamicum and E. coli, mainly after engineering genetic modification. Fungi, like Rhizopus spp. can metabolize different renewable carbon resources, with advantageously amylolytic properties to produce lactic acid. Additionally, yeasts can tolerate environmental restrictions (for example acidic conditions), being the wild-type low lactic acid producers that have been improved by genetic manipulation. Microalgae and cyanobacteria, as photosynthetic microorganisms can be an alternative lactic acid producer without carbohydrate feed costs. For lactic acid production, it is necessary to have substrates in the fermentation medium. Different carbohydrate sources can be used, from plant waste as molasses, starchy, lignocellulosic materials as agricultural and forestry residues. Dairy waste also can be used by the addition of supplementary components with a nitrogen source.

High-Titer Lactic Acid Production by Pediococcus acidilactici PA204 from Corn Stover through Fed-Batch Simultaneous Saccharification and Fermentation

Lignocellulose comprised of cellulose and hemicellulose is one of the most abundant renewable feedstocks. Lactic acid bacteria have the ability to ferment sugar derived from lignocellulose. In this study, Pediococcus acidilactici PA204 is a lactic acid bacterium with a high tolerance of temperature and high-efficiency utilization of xylose. We developed a fed-batch simultaneous saccharification and fermentation (SSF) process at 37 °C (pH 6.0) using the 30 FPU (filter paper units)/g cellulase and 20 g/L corn steep powder in a 5 L bioreactor to produce lactic acid (LA). The titer, yield, and productivity of LA produced from 12% (w/w) NaOH-pretreated and washed stover were 92.01 g/L, 0.77 g/g stover, and 1.28 g/L/h, respectively, and those from 15% NaOH-pretreated and washed stover were 104.11 g/L, 0.69 g/g stover, and 1.24 g/L/h, respectively. This study develops a feasible fed-batch SSF process for LA production from corn stover and provides a promising candidate strain for high-titer and -yield lignocellulose-derived LA production.

An oxidoreductase gene ZMO1116 enhances the p-benzoquinone biodegradation and chiral lactic acid fermentability of Pediococcus acidilactici

p-Benzoquinone (BQ) is a lignin-derived inhibitor to microbial strains. Unlike the furan inhibitors, p-benzoquinone is recalcitrant to traditional detoxification methods. This study shows a biological degradation of p-benzoquinone and a simultaneous D-lactic acid fermentation by an engineered Pediococcus acidilactici strain. The overexpression of an oxidoreductase gene ZMO1116 from Zymomonas mobilis encoding oxidoreductase was identified to improve the D-lactic acid fermentability of P. acidilactici against p-benzoquinone. The gene ZMO1116 was integrated into the genome of P. acidilactici and enabled the engineered P. acidilactici to convert p-benzoquinone into less toxic hydroquinone (HQ), resulting in the improved p-benzoquinone tolerance. Simultaneous saccharification and co-fermentation (SSCF) was conducted using the pretreated and biodetoxified corn stover containing p-benzoquinone, the D-lactic acid production of the engineered strain (123.8 g/L) was 21.4 % higher than the parental strain (102.0 g/L). This study provides a practical method on robust p-benzoquinone tolerance and efficient cellulosic chiral lactic acid fermentation from lignocellulose feedstock.

A short-chain dehydrogenase plays a key role in cellulosic D-lactic acid fermentability of Pediococcus acidilactici

Phenolic aldehydes from lignocellulose pretreatment are strong inhibitors of cell growth and metabolism of cellulosic lactic acid bacteria. Their low solubility and recalcitrance highly reduce the removal efficiency of various detoxification methods. This study shows a simultaneous conversion of phenolic aldehydes and fermentation of D-lactic acid by Pediococcus acidilactici using corn stover feedstock. Vanillin was found to be the strongest phenolic aldehyde inhibitor to P. acidilactici. The overexpression of a short-chain dehydrogenase encoded by the gene CGS9114_RS09725 from Corynebacterium glutamicum was identified to play a key role in D-lactic acid fermentability of P. acidilactici. The engineered P. acidilactici with the genome integration of CGS9114_RS09725 showed the accelerated vanillin reduction and improved cellulosic D-lactic acid production. This study reveals that vanillin conversion is crucial for D-lactic acid fermentation, and the direct expression of a specific vanillin reduction gene in lactic acid bacterium efficiently improves cellulosic D-lactic acid production.

Engineering of Trichoderma reesei for enhanced degradation of lignocellulosic biomass by truncation of the cellulase activator ACE3

BACKGROUND

The filamentous fungus Trichoderma reesei is a major workhorse employed to produce cellulase, which hydrolyzes lignocellulosic biomass for the production of cellulosic ethanol and bio-based products. However, the economic efficiency of biorefineries is still low.

RESULTS

In this study, the truncation of cellulase activator ACE3 was identified and characterized in T. reesei classical mutant NG14 and its direct descendants for the first time. We demonstrated that the truncated ACE3 is the crucial cause of cellulase hyper-production in T. reesei NG14 branch. Replacing the native ACE3 with truncated ACE3 in other T. reesei strains remarkably improves cellulase production. By truncating ACE3, we engineered a T. reesei mutant, PC-3-7-A723, capable of producing more cellulase than other strains. In a 30-L fermenter, fed-batch fermentation with PC-3-7-A723 drastically increased the maximum cellulase titer (FPase) to 102.63 IU/mL at 240 h, which constitutes a 20-30% improvement to that of the parental strain PC-3-7.

CONCLUSIONS

This work characterized the function of truncated ACE3 and demonstrated that analysis of classical mutants allows rational engineering of mutant strains with improved cellulase production necessary to process lignocellulosic biomass. Our rational engineering strategy might be useful for enhancing the production of other bio-based products.

Adaptive evolution of Gluconobacter oxydans accelerates the conversion rate of non-glucose sugars derived from lignocellulose biomass

Gluconobacter oxydans is capable of oxidizing various lignocellulose derived sugars into the corresponding sugar acids including glucose, xylose, arabinose, galactose and mannose, but simultaneous utilization of these sugars is difficult. This study attempted an adaptive evolution of G. oxydans by alternate transfer in inhibitors containing hydrolysate and inhibitors free hydrolysate for intensifying sugars simultaneous utilization. After 420 days' continuous culture, the conversion rate of all non-glucose sugars significantly improved by several folds and achieved complete conversion of lignocellulose-derived sugars to the corresponding sugar acids. The significant up-regulation of mGDH gene in the adapted G. oxydans strain (more than 40-fold greater than the parental) was considered as the decisive factor for the improvement of strain performance. This evolution adaptation strategy also could be used to accelerate robust sugars utilization for other fermented strains in lignocellulose biorefinery.

Co-culture of Lactobacillus delbrueckii and engineered Lactococcus lactis enhances stoichiometric yield of D-lactic acid from whey permeate

D-Lactic acid (D-LA) is an enantiomer of lactic acid, which has a niche application in synthesis of poly-lactic acid based (PLA) polymer owing to its contribution to the thermo-stability of stereo-complex PLA polymer. Utilization of renewable substrates such as whey permeate is pivotal to economically viable production of D-LA. In present work, we have demonstrated D-LA production from whey permeate by Lactobacillus delbrueckii and engineered Lactococcus lactis. We observed that lactose fermentation by a monoculture of L. delbrueckii yields D-LA and galactose as major products. The highest yield of D-LA obtained was 0.48 g g^-1 when initial lactose concentration was 30 g L^-1. Initial lactose concentration beyond 20 g L^-1 resulted in accumulation of glucose and galactose, and hence, reduced the stoichiometric yield of D-LA. L. lactis naturally produces L-lactic acid (L-LA), so a mutant strain of L. lactis (L. lactis Δldh ΔldhB ΔldhX) was used to prevent L-LA production and engineer it for D-LA production. Heterologous over-expression of D-lactate dehydrogenase (ldhA) in the recombinant strain L. lactis TSG1 resulted in 0.67 g g^-1 and 0.44 g g^-1 of D-LA yield from lactose and galactose, respectively. Co-expression of galactose permease (galP) and α-phosphoglucomutase (pgmA) with ldhA in the recombinant strain L. lactis TSG3 achieved a D-LA yield of 0.92 g g^-1 from galactose. A co-culture batch process of L. delbrueckii and L. lactis TSG3 achieved an enhanced stoichiometric yield of 0.90 g g^-1 and ~45 g L^-1D-LA from whey permeate (lactose). This is the highest reported yield of D-LA from lactose substrate, and the titres can be improved further by a suitably designed fed-batch co-culture process.

Heterozygous diploid structure of Amorphotheca resinae ZN1 contributes efficient biodetoxification on solid pretreated corn stover

BACKGROUND

Fast, complete, and ultimate removal of inhibitory compounds derived from lignocellulose pretreatment is the prerequisite for efficient production of cellulosic ethanol and biochemicals. Biodetoxification is the most promising method for inhibitor removal by its unique advantages. The biodetoxification mechanisms of a unique diploid fungus responsible for highly efficient biodetoxification in solid-state culture was extensively investigated in the aspects of cellular structure, genome sequencing, transcriptome analysis, and practical biodetoxification.

RESULTS

The inborn heterozygous diploid structure of A. resinae ZN1 uniquely contributed to the enhancement of inhibitor tolerance and conversion. The co-expression of gene pairs contributed to the enhancement of the degradation of lignocellulose-derived model inhibitors. The ultimate inhibitors degradation pathways and sugar conservation were elucidated by microbial degradation experimentation as well as the genomic and transcriptomic sequencing analysis.

CONCLUSIONS

The finding of the heterozygous diploid structure in A. resinae ZN1 on biodetoxification took the first insight into the global overview of biodetoxification mechanism of lignocellulose-derived inhibitors. This study provided a unique and practical biodetoxification biocatalyst of inhibitor compounds for lignocellulose biorefinery processing, as well as the synthetic biology tools on biodetoxification of biorefinery fermenting strains.

Enhancement of cellulase production in Trichoderma reesei RUT-C30 by comparative genomic screening

BACKGROUND

Cellulolytic enzymes produced by the filamentous fungus Trichoderma reesei are commonly used in biomass conversion. The high cost of cellulase is still a significant challenge to commercial biofuel production. Improving cellulase production in T. reesei for application in the cellulosic biorefinery setting is an urgent priority.

RESULTS

Trichoderma reesei hyper-cellulolytic mutant SS-II derived from the T. reesei NG14 strain exhibited faster growth rate and more efficient lignocellulosic biomass degradation than those of RUT-C30, another hyper-cellulolytic strain derived from NG14. To identify any genetic changes that occurred in SS-II, we sequenced its genome using Illumina MiSeq. In total, 184 single nucleotide polymorphisms and 40 insertions and deletions were identified. SS-II sequencing revealed 107 novel mutations and a full-length wild-type carbon catabolite repressor 1 gene (cre1). To combine the mutations of RUT-C30 and SS-II, the sequence of one confirmed beneficial mutation in RUT-C30, cre196, was introduced in SS-II to replace full-length cre1, forming the mutant SS-II-cre196. The total cellulase production of SS-II-cre196 was decreased owing to the limited growth of SS-II-cre196. In contrast, 57 genes mutated only in SS-II were selected and knocked out in RUT-C30. Of these, 31 were involved in T. reesei growth or cellulase production. Cellulase activity was significantly increased in five deletion strains compared with that in two starter strains, RUT-C30 and SS-II. Cellulase production of T. reesei Δ108642 and Δ56839 was significantly increased by 83.7% and 70.1%, respectively, compared with that of RUT-C30. The amount of glucose released from pretreated corn stover hydrolyzed by the crude enzyme from Δ108642 increased by 11.9%.

CONCLUSIONS

The positive attribute confirmed in one cellulase hyper-producing strain does not always work efficiently in another cellulase hyper-producing strain, owing to the differences in genetic background. Genome re-sequencing revealed novel mutations that might affect cellulase production and other pathways indirectly related to cellulase formation. Our strategy of combining the mutations of two strains successfully identified a number of interesting phenotypes associated with cellulase production. These findings will contribute to the creation of a gene library that can be used to investigate the involvement of various genes in the regulation of cellulase production.

Steps Toward High-Performance PLA: Economical Production of d-Lactate Enabled by a Newly Isolated Sporolactobacillus terrae Strain

Optically pure d-lactate production has received much attention for its critical role in high-performance polylactic acid production. However, the current technology can hardly meet the comprehensive demand of industrialization on final titer, productivity, optical purity, and raw material costs. Here, an efficient d-lactate producer strain, Sporolactobacillus terrae (S. terrae) HKM-1, is isolated for d-lactate production. The strain HKM-1 shows extremely high d-lactate fermentative capability by using peanut meal, soybean meal, or corn steep liquor powder as a sole nitrogen source; the final titers (205.7 g L-1 , 218.9 g L-1 , and 193.9 g L-1 , respectively) and productivities (5.56 g L-1  h-1 , 5.34 g L-1  h-1 , and 3.73 g L-1  h-1 , respectively) of d-lactate reached the highest level ever reported. A comparative genomic analysis between S. terrae HKM-1 and previously reported d-lactate high-producing Sporolactobacillus inulinus (S. inulinus) CASD is conducted. The results show that many unrelated genetic features may contribute to the superior performance in d-lactate production of S. terrae HKM-1. This d-lactate producer HKM-1, along with its fermentation process, is promising for sustainable d-lactate production by using agro-industrial wastes.

Model-based temperature control for improving lactic acid production from glycerol

To maximize the final lactic acid productivity and concentration, temperature control was optimized using a mathematical modelling approach. A kinetic model, including cell growth, product formation and substrate consumption equations, was proposed to describe the lactic acid production process by Escherichia coli AC-521 with glycerol as the substrate. By constructing four functions, the temperature effect was introduced on the fermentation process, where four parameters (X_max, μ_max, Y_ps and β) were observed to be significantly affected by the temperature. For the convenience of application, the temperature control strategies were simplified by dividing the whole fermentation process into several units. In each unit, the temperature was controlled constantly. Based on the model, the optimal temperature for each unit was determined to maximize the final lactate productivity. This temperature control strategy can be effectively applied in batch and fed-batch cultures, and the verified experimental evaluation showed a good correlation with the model data. Under improved temperature control conditions, a maximal lactic acid concentration of 90.4 g L⁻¹ was obtained after 80 h of fed-batch fermentation, giving a productivity of 1.13 g L⁻¹ h⁻¹, which is 1.2 times more than that in the conventional constant temperature during the cultivation course.

With model-based temperature control, yield of lactic acid obtained was higher than that obtained in the conventional process with a constant temperature.

A Process Study of Lactic Acid Production from Phragmites australis Straw by a Thermophilic Bacillus coagulans Strain under Non-Sterilized Conditions

Phragmites australis straw (PAS) is an abundant and renewable wetland lignocellulose. Bacillus coagulans IPE22 is a robust thermophilic strain with pentose-utilizing capability and excellent resistance to growth inhibitors. This work is focused on the process study of lactic acid (LA) production from P. australis lignocellulose which has not been attempted previously. By virtue of thermophilic feature of strain IPE22, two fermentation processes (i.e., separated process and integrated process), were developed and compared under non-sterilized conditions. The integrated process combined dilute-acid pretreatment, hemicellulosic hydrolysates fermentation, and cellulose utilization. Sugars derived from hemicellulosic hydrolysates and cellulose enzymatic hydrolysis were efficiently fermented to LA in a single vessel. Using the integrated process, 41.06 g LA was produced from 100 g dry PAS. The established integrated process results in great savings in terms of time and labor, and the fermentation process under non-sterilized conditions is easy to scale up for economical production of lactic acid from PAS.

Construction of enhanced transcriptional activators for improving cellulase production in Trichoderma reesei RUT C30

Enhancing cellulase production in Trichoderma reesei is of great interest for an economical biorefinery. Artificial transcription factors are a potentially powerful molecular strategy for improving cellulase production in T. reesei. In this study, enhanced transcriptional activators XYR1VP, ACE2VP, and ACE1VP were constructed by linking the C terminus of XYR1, ACE2, or ACE1 with an activation domain of herpes simplex virus protein VP16. T. reesei transformants T_XYR1VP, T_ACE2VP, and T_ACE1VP showed improved cellulase and/or xylanase production. T_XYR1VP has a cellulase-free phenotype but with significantly elevated xylanase production. Xylanase I and xylanase II activities [U/(mg biomass)] increased by 51% and 80%, respectively, in T_XYR1VP in comparison with parental strain RUT C30. The filter paper activity of T_ACE2VP in the Avicel-based medium increased by 52% compared to that of RUT C30. In the Avicel-based medium, T_ACE1VP manifested an 80% increase in FPase activity and a 50% increase in xylanase activity as compared to those of RUT C30. Additionally, when pretreated corn stover was hydrolyzed, crude enzymes produced from T_ACE1VP yielded a greater glucose release than did the enzymes produced by parental strain RUT C30.

Enhanced cellulase production in Trichoderma reesei RUT C30 via constitution of minimal transcriptional activators

Background

Cellulase can convert lignocellulosic feedstocks into fermentable sugars, which can be used for the industrial production of biofuels and chemicals. The high cost of cellulase production remains a challenge for lignocellulose breakdown. Trichoderma reesei RUT C30 serves as a well-known industrial workhorse for cellulase production. Therefore, the enhancement of cellulase production by T. reesei RUT C30 is of great importance.

Results

Two sets of novel minimal transcriptional activators (DBD_ace2-VP16 and DBD_cre1-VP16) were designed and expressed in T. reesei RUT C30. Expression of DBD_ace2-VP16 and DBD_cre1-VP16 improved cellulase production under induction (avicel or lactose) and repression (glucose) conditions, respectively. The strain T_MTA66 under avicel and T_MTA139 under glucose with the highest cellulase activities outperformed other transformants and the parental strain under the corresponding conditions. For T_MTA66 strains, the highest FPase activity was approximately 1.3-fold greater than that of the parental strain RUT C30 at 120 h of cultivation in a shake flask using avicel as the sole carbon source. The FPase activity (U/mg biomass) in T_MTA139 strains was approximately 26.5-fold higher than that of the parental strain RUT C30 at 72 h of cultivation in a shake flask using glucose as the sole carbon source. Furthermore, the crude enzymes produced in the 7-L fermenter from T_MTA66 and T_MTA139 supplemented with commercial β-glucosidase hydrolyzed pretreated corn stover effectively.

Conclusions

These results show that replacing natural transcription factors with minimal transcriptional activators is a powerful strategy to enhance cellulase production in T. reesei. Our current study also offers an alternative genetic engineering strategy for the enhanced production of industrial products by other fungi.

Electronic supplementary material

The online version of this article (10.1186/s12934-018-0926-7) contains supplementary material, which is available to authorized users.

Simultaneous saccharification and aerobic fermentation of high titer cellulosic citric acid by filamentous fungus Aspergillus niger

Simultaneous saccharification and fermentation (SSF) is the most efficient operation in biorefining conversion, but aerobic SSF under high solids loading significantly faces the serious oxygen transfer limitation. This study took the first insight into an aerobic SSF by high oxygen demanding filamentous fungi in highly viscous lignocellulose hydrolysate. The results show that oxygen requirement in the aerobic SSF by Aspergillus niger was well satisfied for production of cellulosic citric acid. The record high citric acid titer of 136.3 g/L and the overall conversion yield of 74.9% of cellulose were obtained by the aerobic SSF. The advantage of SSF to the separate hydrolysis and fermentation (SHF) on citric acid fermentation was compared based on the rigorous Aspen Plus modeling. The techno-economic analysis indicates that the minimum citric acid selling price (MCSP) of $0.603 per kilogram by SSF was highly competitive with the commercial citric acid from starch feedstock.

Engineering Pediococcus acidilactici with xylose assimilation pathway for high titer cellulosic l-lactic acid fermentation

Xylose-assimilating pathways were constructed in the parental Pediococcus acidilactici strain and evolutionarily adapted to yield a highly stable co-fermentation strain for l-lactic acid production. The phosphoketolase pathway (PK) was blocked for reduction of acetic acid generation by disrupting phosphoketolase (pkt) gene. The pentose phosphate pathway (PPP) was reconstructed for xylose assimilation by integrating four heterologous genes encoding transketolase (tkt), transaldolase (tal), xylose isomerase (xylA) and xylulokinase (xylB) into the P. acidilactici chromosome. The xylose-assimilating ability of the constructed strain was significantly improved by long term adaptive evolution. The engineered strain was applied to the simultaneous saccharification and co-fermentation (SSCF) under high solids loading of wheat straw. The l-lactic acid titer, productivity and xylose conversion reached the record high at 130.8±1.6g/L, 1.82±0.0g/L/h, and 94.9±0.0%, respectively. This study provided an important strain and process prototype for production of high titer cellulosic l-lactic acid.

Non-sterilized fermentation of high optically pure D-lactic acid by a genetically modified thermophilic Bacillus coagulans strain

Background

Optically pure d-lactic acid (≥ 99%) is an important precursor of polylactic acid. However, there are relatively few studies on d-lactic acid fermentation compared with the extensive investigation of l-lactic acid production. Most lactic acid producers are mesophilic organisms. Optically pure d-lactic acid produced at high temperature not only could reduce the costs of sterilization but also could inhibit the growth of other bacteria, such as l-lactic acid producers.

Results

Thermophilic Bacillus coagulans is an excellent producer of l-lactic acid with capable of growing at 50 °C. In our previous study, the roles of two l-lactic acid dehydrogenases have been demonstrated in B. coagulans DSM1. In this study, the function of another annotated possible l-lactate dehydrogenase gene (ldhL3) was verified to be leucine dehydrogenase with an activity of 0.16 units (μmol/min) per mg protein. Furthermore, the activity of native d-lactate dehydrogenase was too low to support efficient d-lactic acid production, even under the control of strong promoter. Finally, an engineered B. coagulans D-DSM1 strain with the capacity for efficient production of d-lactic acid was constructed by deletion of two l-lactate dehydrogenases genes (ldhL1 and ldhL2) and insertion of the d-lactate dehydrogenase gene (LdldhD) from Lactobacillus delbrueckii subsp. bulgaricus DSM 20081 at the position of ldhL1.

Conclusions

This genetically engineered strain produced only d-lactic acid under non-sterilized condition, and finally 145 g/L of d-lactic acid was produced with an optical purity of 99.9% and a high yield of 0.98 g/g. This is the highest optically pure d-lactic acid titer produced by a thermophilic strain.

Electronic supplementary material

The online version of this article (10.1186/s12934-017-0827-1) contains supplementary material, which is available to authorized users.