1,5-Diaminopentane production from xylooligosaccharides using metabolically engineered Corynebacterium glutamicum displaying beta-xylosidase on the cell surface

Biodegradable Biobased Polymers: A Review of the State of the Art, Challenges, and Future Directions

Biodegradable biobased polymers derived from biomass (such as plant, animal, marine, or forestry material) show promise in replacing conventional petrochemical polymers. Research and development have been conducted for decades on potential biodegradable biobased polymers such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs), and succinate polymers. These materials have been evaluated for practicality, cost, and production capabilities as limiting factors in commercialization; however, challenges, such as the environmental limitations on the biodegradation rates for biodegradable biobased polymer, need to be addressed. This review provides a history and overview of the current development in the synthesis process and properties of biodegradable biobased polymers, along with a techno-commercial analysis and discussion on the environmental impacts of biodegradable biobased polymers. Specifically, the techno-commercial analysis focuses on the commercial potential, financial assessment, and life-cycle assessment of these materials, as well as government initiatives to facilitate the transition towards biodegradable biobased polymers. Lastly, the environmental assessment focuses on the current challenges with biodegradation and methods of improving the recycling process and reusability of biodegradable biobased polymers.

Engineering Microorganisms to Produce Bio-Based Monomers: Progress and Challenges

Bioplastics are polymers made from sustainable bio-based feedstocks. While the potential of producing bio-based monomers in microbes has been investigated for decades, their economic feasibility is still unsatisfactory compared with petroleum-derived methods. To improve the overall synthetic efficiency of microbial cell factories, three main strategies were summarized in this review: firstly, implementing approaches to improve the microbial utilization ability of cheap and abundant substrates; secondly, developing methods at enzymes, pathway, and cellular levels to enhance microbial production performance; thirdly, building technologies to enhance microbial pH, osmotic, and metabolites stress tolerance. Moreover, the challenges of, and some perspectives on, exploiting microorganisms as efficient cell factories for producing bio-based monomers are also discussed.

Recent advances in microbial production of diamines, aminocarboxylic acids, and diacids as potential platform chemicals and bio-based polyamides monomers

Recently, bio-based manufacturing processes of value-added platform chemicals and polymers in biorefineries using renewable resources have extensively been developed for sustainable and carbon dioxide (CO₂) neutral-based industry. Among them, bio-based diamines, aminocarboxylic acids, and diacids have been used as monomers for the synthesis of polyamides having different carbon numbers and ubiquitous and versatile industrial polymers and also as precursors for further chemical and biological processes to afford valuable chemicals. Until now, these platform bio-chemicals have successfully been produced by biorefinery processes employing enzymes and/or microbial host strains as main catalysts. In this review, we discuss recent advances in bio-based production of diamines, aminocarboxylic acids, and diacids, which has been developed and improved by systems metabolic engineering strategies of microbial consortia and optimization of microbial conversion processes including whole cell bioconversion and direct fermentative production.

Metabolic Engineering for Valorization of Agri- and Aqua-Culture Sidestreams for Production of Nitrogenous Compounds by Corynebacterium glutamicum

Corynebacterium glutamicum is used for the million-ton-scale production of amino acids. Valorization of sidestreams from agri- and aqua-culture has focused on the production of biofuels and carboxylic acids. Nitrogen present in various amounts in sidestreams may be valuable for the production of amines, amino acids and other nitrogenous compounds. Metabolic engineering of C. glutamicum for valorization of agri- and aqua-culture sidestreams addresses to bridge this gap. The product portfolio accessible via C. glutamicum fermentation primarily features amino acids and diamines for large-volume markets in addition to various specialty amines. On the one hand, this review covers metabolic engineering of C. glutamicum to efficiently utilize components of various sidestreams. On the other hand, examples of the design and implementation of synthetic pathways not present in native metabolism to produce sought after nitrogenous compounds will be provided. Perspectives and challenges of this concept will be discussed.

Production of Cadaverine in Recombinant Corynebacterium glutamicum Overexpressing Lysine Decarboxylase (ldcC) and Response Regulator dr1558

In this study, the response regulator DR1558 from Deinococcus radiodurans was overexpressed in recombinant Corynebacterium glutamicum with lysine decarboxylase (ldcC). The recombinant C. glutamicum strain overexpressing dr1558 and ldcC produced 5.9 g/L of cadaverine by flask cultivation, whereas the control strain overexpressing only ldcC produced 4.5 g/L of cadaverine. To investigate the mechanism underlying the effect of DR1558, the expression levels of genes related to central metabolism and lysine-biosynthesis were analyzed by quantitative-real time polymerase chain reaction. The results showed that phosphoenolpyruvate carboxykinase (pck) was downregulated, and pyruvate kinase (pyk) and other lysine biosynthesis genes were upregulated. Furthermore, in fed-batch fermentation, C. glutamicum coexpressing dr1558 produced 25.14 g/L of cadaverine, a 1.25-fold increase in concentration relative to the control. These results suggested that the heterologous expression of dr1558 may improve the production of biorefinery products by recombinant C. glutamicum.

Application of Corynebacterium glutamicum engineering display system in three generations of biorefinery

The fermentation production of platform chemicals in biorefineries is a sustainable alternative to the current petroleum refining process. The natural advantages of Corynebacterium glutamicum in carbon metabolism have led to C. glutamicum being used as a microbial cell factory that can use various biomass to produce value-added platform chemicals and polymers. In this review, we discussed the use of C. glutamicum surface display engineering bacteria in the three generations of biorefinery resources, and analyzed the C. glutamicum engineering display system in degradation, transport, and metabolic network reconstruction models. These engineering modifications show that the C. glutamicum engineering display system has great potential to become a cell refining factory based on sustainable biomass, and further optimizes the inherent properties of C. glutamicum as a whole-cell biocatalyst. This review will also provide a reference for the direction of future engineering transformation.

Ameliorating end-product inhibition to improve cadaverine production in engineered Escherichia coli and its application in the synthesis of bio-based diisocyanates

Cadaverine is an important C5 platform chemical with a wide range of industrial applications. However, the cadaverine inhibition on the fermenting strain limited its industrial efficiency of the strain. In this study, we report an engineered Escherichia coli strain with high cadaverine productivity that was generated by developing a robust host coupled with metabolic engineering to mitigate cadaverine inhibition. First, a lysine producing E. coli was treated with a combination of radiation (ultraviolet and visible spectrum) and ARTP (atmospheric and room temperature plasma) mutagenesis to obtain a robust host with high cadaverine tolerance. Three mutant targets including HokD, PhnI and PuuR are identified for improved cadaverine tolerance. Further transcriptome analysis suggested that cadaverine suppressed the synthesis of ATP and lysine precursor. Accordingly, the related genes involved in glycolysis and lysine precursor, as well as cadaverine exporter was engineered to release the cadaverine inhibition. The final engineered strain was fed-batch cultured and a titer of 58.7 g/L cadaverine was achieved with a yield of 0.396 g/g, both of which were the highest level reported to date in E. coli. The bio-based cadaverine was purified to >99.6% purity, and successfully used for the synthesis of polyurethane precursor 1,5-pentamethylene diisocyanate (PDI) through the approach of carbamate decomposition.

Synthetic biology as driver for the biologization of materials sciences

Materials in nature have fascinating properties that serve as a continuous source of inspiration for materials scientists. Accordingly, bio-mimetic and bio-inspired approaches have yielded remarkable structural and functional materials for a plethora of applications. Despite these advances, many properties of natural materials remain challenging or yet impossible to incorporate into synthetic materials. Natural materials are produced by living cells, which sense and process environmental cues and conditions by means of signaling and genetic programs, thereby controlling the biosynthesis, remodeling, functionalization, or degradation of the natural material. In this context, synthetic biology offers unique opportunities in materials sciences by providing direct access to the rational engineering of how a cell senses and processes environmental information and translates them into the properties and functions of materials. Here, we identify and review two main directions by which synthetic biology can be harnessed to provide new impulses for the biologization of the materials sciences: first, the engineering of cells to produce precursors for the subsequent synthesis of materials. This includes materials that are otherwise produced from petrochemical resources, but also materials where the bio-produced substances contribute unique properties and functions not existing in traditional materials. Second, engineered living materials that are formed or assembled by cells or in which cells contribute specific functions while remaining an integral part of the living composite material. We finally provide a perspective of future scientific directions of this promising area of research and discuss science policy that would be required to support research and development in this field.

Lysine Production by Dry Biorefining of Wheat Straw and Cofermentation of Corynebacterium glutamicum

A preliminary study shows that lysine production from lignocellulose feedstock is feasible, but the conversion of xylose in lignocellulose to lysine remains unsolved. Two technical barriers are responsible for the remaining xylose conversion: one is the xylose loss into the wastewater stream of the biorefinery processing chain, and the other is the lack of efficient lysine-producing strain with xylose utilization. Here, we conducted a new biorefinery approach of consequent dry acid pretreatment and biodetoxification, resulting in zero wastewater generation and then well-preserved xylose. To provide the lysine-producing strain with xylose utilization, we modified the Corynebacterium glutamicum by establishing the xylose assimilation pathway and improving the NADPH cofactor regeneration. The combinational modification of biorefinery processing and strain development led to 31.3 g/L of lysine production with a yield of 0.23 g lysine per gram of wheat straw derived sugars. This study provides a practical method for upgraded lysine production from lignocellulose for future industrial applications.

Recent progress in production of amino acid-derived chemicals using Corynebacterium glutamicum

Green chemical production by microbial processes is critical for the development of a sustainable society in the twenty-first century. Among the important industrial microorganisms, the gram-positive bacterium Corynebacterium glutamicum has been utilized for amino acid fermentation, which is one of the largest microbial-based industries. To date, several amino acids, including L-glutamic acid, L-lysine, and L-threonine, have been produced by C. glutamicum. The capability to produce substantial amounts of amino acids has gained immense attention because the amino acids can be used as a precursor to produce other high-value-added chemicals. Recent developments in metabolic engineering and synthetic biology technologies have enabled the extension of metabolic pathways from amino acids. The present review provides an overview of the recent progress in the microbial production of amino acid-derived bio-based monomers such as 1,4-diaminobutane, 1,5-diaminopentane, glutaric acid, 5-aminolevulinic acid, L-pipecolic acid, 4-amino-1-butanol, and 5-aminolevulinic acid, as well as building blocks for healthcare products and pharmaceuticals such as ectoine, L-theanine, and gamma-aminobutyric acid by metabolically engineered C. glutamicum.

Fermentative Production of l-2-Hydroxyglutarate by Engineered Corynebacterium glutamicum via Pathway Extension of l-Lysine Biosynthesis

l-2-hydroxyglutarate (l-2HG) is a trifunctional building block and highly attractive for the chemical and pharmaceutical industries. The natural l-lysine biosynthesis pathway of the amino acid producer Corynebacterium glutamicum was extended for the fermentative production of l-2HG. Since l-2HG is not native to the metabolism of C. glutamicum metabolic engineering of a genome-streamlined l-lysine overproducing strain was required to enable the conversion of l-lysine to l-2HG in a six-step synthetic pathway. To this end, l-lysine decarboxylase was cascaded with two transamination reactions, two NAD(P)-dependent oxidation reactions and the terminal 2-oxoglutarate-dependent glutarate hydroxylase. Of three sources for glutarate hydroxylase the metalloenzyme CsiD from Pseudomonas putida supported l-2HG production to the highest titers. Genetic experiments suggested a role of succinate exporter SucE for export of l-2HG and improving expression of its gene by chromosomal exchange of its native promoter improved l-2HG production. The availability of Fe²⁺ as cofactor of CsiD was identified as a major bottleneck in the conversion of glutarate to l-2HG. As consequence of strain engineering and media adaptation product titers of 34 ± 0 mM were obtained in a microcultivation system. The glucose-based process was stable in 2 L bioreactor cultivations and a l-2HG titer of 3.5 g L⁻¹ was obtained at the higher of two tested aeration levels. Production of l-2HG from a sidestream of the starch industry as renewable substrate was demonstrated. To the best of our knowledge, this study is the first description of fermentative production of l-2HG, a monomeric precursor used in electrochromic polyamides, to cross-link polyamides or to increase their biodegradability.

High-efficiency and low-cost production of cadaverine from a permeabilized-cell bioconversion by a Lysine-induced engineered Escherichia coli

Cadaverine is the monomer of bio-based nylons polyamide 5.4, 5.6 and 5.10. In this study, a litre-scale integrated strategy was developed for high-efficiency and low-cost production of cadaverine using an engineered Escherichia coli. Firstly, the engineered strain BL21-P_cad-CadA induced by cheap l-lysine-HCl instead of IPTG was constructed. Then the permeabilized cells were served as the biocatalyst for the production of cadaverine, because the enhanced permeability facilitated the mass transfer of the substrate and the release of products. After the replacement of industrial materials and the solution of the scale-up permeabilization process, cadaverine concentration reached 205 g/L with the yield of 92.1% after 20 h in a 2 L bioconversion system, achieving the level of industrial production. Furthermore, the costs of industrial materials for 2 L integrated strategy ($2.78) was only 1/11 of the lab reagents ($30.88). Therefore, the proposed strategy is a promising candidate for the industrial process of cadaverine.

Microbial Engineering for Production of N-Functionalized Amino Acids and Amines

N-functionalized amines play important roles in nature and occur, for example, in the antibiotic vancomycin, the immunosuppressant cyclosporine, the cytostatic actinomycin, the siderophore aerobactin, the cyanogenic glucoside linamarin, and the polyamine spermidine. In the pharmaceutical and fine-chemical industries N-functionalized amines are used as building blocks for the preparation of bioactive molecules. Processes based on fermentation and on enzyme catalysis have been developed to provide sustainable manufacturing routes to N-alkylated, N-hydroxylated, N-acylated, or other N-functionalized amines including polyamines. Metabolic engineering for provision of precursor metabolites is combined with heterologous N-functionalizing enzymes such as imine or ketimine reductases, opine or amino acid dehydrogenases, N-hydroxylases, N-acyltransferase, or polyamine synthetases. Recent progress and applications of fermentative processes using metabolically engineered bacteria and yeasts along with the employed enzymes are reviewed and the perspectives on developing new fermentative processes based on insight from enzyme catalysis are discussed.

Protein-Rich Biomass Waste as a Resource for Future Biorefineries: State of the Art, Challenges, and Opportunities

Protein-rich biomass provides a valuable feedstock for the chemical industry. This Review describes every process step in the value chain from protein waste to chemicals. The first part deals with the physicochemical extraction of proteins from biomass, hydrolytic degradation to peptides and amino acids, and separation of amino acid mixtures. The second part provides an overview of physical and (bio)chemical technologies for the production of polymers, commodity chemicals, pharmaceuticals, and other fine chemicals. This can be achieved by incorporation of oligopeptides into polymers, or by modification and defunctionalization of amino acids, for example, their reduction to amino alcohols, decarboxylation to amines, (cyclic) amides and nitriles, deamination to (di)carboxylic acids, and synthesis of fine chemicals and ionic liquids. Bio- and chemocatalytic approaches are compared in terms of scope, efficiency, and sustainability.

Metabolic engineering advances and prospects for amino acid production

Amino acid fermentation is one of the major pillars of industrial biotechnology. The multi-billion USD amino acid market is rising steadily and is diversifying. Metabolic engineering is no longer focused solely on strain development for the bulk amino acids L-glutamate and L-lysine that are produced at the million-ton scale, but targets specialty amino acids. These demands are met by the development and application of new metabolic engineering tools including CRISPR and biosensor technologies as well as production processes by enabling a flexible feedstock concept, co-production and co-cultivation schemes. Metabolic engineering advances are exemplified for specialty proteinogenic amino acids, cyclic amino acids, omega-amino acids, and amino acids functionalized by hydroxylation, halogenation and N-methylation.

Recombinant Protein Expression System in Corynebacterium glutamicum and Its Application

Corynebacterium glutamicum, a soil-derived gram-positive actinobacterium, has been widely used for the production of biochemical molecules such as amino acids (i.e., L-glutamate and L-lysine), nucleic acids, alcohols, and organic acids. The metabolism of the bacterium has been engineered to increase the production of the target biochemical molecule, which requires a cytosolic enzyme expression. As recent demand for new proteinaceous biologics (such as antibodies, growth factors, and hormones) increase, C. glutamicum is attracting industrial interest as a recombinant protein expression host for therapeutic protein production due to the advantages such as low protease activity without endotoxin activity. In this review, we have summarized the recent studies on the heterologous expression of the recombinant protein in C. glutamicum for metabolic engineering, expansion of substrate availability, and recombinant protein secretion. We have also outlined the advances in genetic components such as promoters, surface anchoring systems, and secretory signal sequences in C. glutamicum for effective recombinant protein expression.

Expanding lysine industry: industrial biomanufacturing of lysine and its derivatives

l-Lysine is widely used as a nutrition supplement in feed, food, and beverage industries as well as a chemical intermediate. At present, great efforts are made to further decrease the cost of lysine to make it more competitive in the markets. Furthermore, lysine also shows potential as a feedstock to produce other high-value chemicals for active pharmaceutical ingredients, drugs, or materials. In this review, the current biomanufacturing of lysine is first presented. Second, the production of novel derivatives from lysine is discussed. Some chemicals like l-pipecolic acid, cadaverine, and 5-aminovalerate already have been obtained at a lab scale. Others like 6-aminocaproic acid, valerolactam, and caprolactam could be produced through a biological and chemical coupling pathway or be synthesized by a hypothetical pathway. This review demonstrates an active and expansive lysine industry, and these green biomanufacturing strategies could also be applied to enhance the competitiveness of other amino acid industry.

Development of a Potential Protein Display Platform in Corynebacterium glutamicum Using Mycolic Acid Layer Protein, NCgl1337, as an Anchoring Motif

In the cell surface display, the choice of host cell and anchoring motif are the most crucial for the efficient display of passenger proteins. Corynebacterium glutamicum has mycolic acid layer in outer membrane and the use of protein in the mycolic acid layer as an anchoring motif can provide a potential platform for surface display in C. glutamicum. All 19 mycolic acid layer proteins of C. glutamicum are analyzed, and two proteins, NCgl0535 and NCgl1337, which have a signal peptide and predicted O-mycoloylation site, are selected as anchoring motifs candidates. Among them, NCgl1337, which shows better expression with higher display efficiency, is chosen as a potential anchoring motif. Two forms of the NCgl1337 anchoring motif, a full-length (1-324 amino acids) and a short-length (1-50 amino acids) containing only signal peptide and O-mycoloylation site, are constructed and their abilities for surface display are examined using two protein models, endoxylanase from Streptomyces coelicolor and α-amylase from Streptococcus bovis. For both model proteins, the short-length NCgl1337 anchoring motif exhibits higher yield of protein display on the surface of C. glutamicum than the full-length NCgl1337. Finally, with C. glutamicum displaying α-amylase, a batch fermentation is performed for the production of l-lysine from starch degradation, and a production of l-lysine as high as 10.8 ± 0.92 g L^-1 was achieved after 18 h of culture.