Up-flow constructed wetland-microbial fuel cell for azo dye, saline, nitrate remediation and bioelectricity generation: From waste to energy approach

Constructed wetland microbial fuel cell as enhancing pollutants treatment technology to produce green energy

The persistent challenge of water pollution, exacerbated by slow progress in ecofriendly technologies and accumulating pollutants, underscores the need for innovative solutions. Constructed Wetland Microbial Fuel Cell (CW-MFC) emerges as an intriguing environmental technology capable of adressing this issue by eliminating contaminants from wastewater while simultaneously producing green energy as an additional bonus. In recent years, CW-MFC technology has gained attention due to its sustainability and promising prospects for a circular waste-free industry. However, due to various technological and biological challenges, it has not yet achieved wide-scale application. This review examines the current state of CW-MFC technology and identifies both biotic and abiotic strategies for optimization through operational and structural improvements affecting biocomponents. Our review highlights several key findings: (1) Plants play an important role in reducing the system's inner resistance through mechanisms such as radial oxygen loss, evapotranspiration, and high photosynthetic flow, which facilitate electroactive bacteria and affect redox potential. (2) Plant characteristics such as root porosity, phloem and aerenchyma development, chlorophyll content, and plant biomass are key indicators of CW-MFC performance and significantly impact both pollutant removal and energy harvesting. (3) We expand the criteria for selecting suitable plants to include mesophytes and C3 pollutant-tolerant species, in addition to traditional aquatic and C4 plants. Additionally, the review presents several technical approaches that enhance CW-MFC efficiency: (1) design optimization, (2) use of novel materials, and (3) application of external electrical fields, aeration, light, and temperature adjustments. CW-MFCs are capable of nearly complete elimination of a wide range of contaminants, including organic matter (84 % ± 10), total nitrogen (80 % ± 7) and phosphorus (79 % ± 18) compounds, metals (86 % ± 10), pharmaceuticals (87 % ± 7), dyes (90 % ± 8), and other complex pollutants, while generating green energy. We hope our findings will be useful in optimizing CW-MFC design and providing insights for researchers aiming to advance the technology and facilitate its future scaling.

Kinetic study on the degradation of Acid Red 88 azo dye in a constructed wetland-microbial fuel cell inoculated with Shewanella oneidensis MR-1

Removal of Acid Red 88 (AR88) as an azo dye from the synthetic type of wastewater was studied in a laboratory-made constructed wetland microbial fuel cell (CW-MFC) inoculated with Shewanella oneidensis MR-1 (SOMR-1). Plant cultivation was implemented using a typical CW plant known as Cyperus alternifolius. The complexity of the SOMR-1 cell membrane having different carriers of electrons and H+ ions gives the microbe special enzymatic ability to participate in the AR88 oxidation link to the O2 reduction. Nernst equation developed based on analyzing the involved redox potential values in these electron exchanges is describable quantitatively in terms of the spontaneity of the catalyzed reaction. Power density (PD) at 100 mg/L of the AR88 under closed-circuit conditions in the presence of the plant was 11.83 mW/m2. Reduction of internal resistance positively affected the PD value. In determining degradation kinetics, two approaches were undertaken: chemically in terms of first- and second-order reactions and biochemically in terms of the mathematical equations for rate determination developed on the basis of substrate inhibitory concept. The first-order rate constant was 0.263 h-1 without plant cultivation and 0.324 h-1 with plant cultivation. The Haldane kinetic model revealed low ks and ki values indicating effective degradation of the AR88. Moreover, the importance of acclimatization in terms of the crucial role of lactate was discussed. These findings suggest that integrating the SOMR-1 electrochemical role with CW-MFC could be a promising approach for the efficient degradation of azo dyes in wastewater treatment.

Constructed wetlands combined with microbial fuel cells (CW-MFCs) as a sustainable technology for leachate treatment and power generation

The physical and chemical treatment processes of leachate are not only costly but can also possibly produce harmful by products. Constructed wetlands (CW) has been considered a promising alternative technology for leachate treatment due to less demand for energy, economic, ecological benefits, and simplicity of operations. Various trends and approaches for the application of CW for leachate treatment have been discussed in this review along with offering an informatics peek of the recent innovative developments in CW technology and its perspectives. In addition, coupling CW with microbial fuel cells (MFCs) has proven to produce renewable energy (electricity) while treating contaminants in leachate wastewaters (CW-MFC). The combination of CW-MFC is a promising bio electrochemical that plays symbiotic among plant microorganisms in the rhizosphere of an aquatic plant that convert sun electricity is transformed into bioelectricity with the aid of using the formation of radical secretions, as endogenous substrates, and microbial activity. Several researchers study and try to find out the application of CW-MFC for leachate treatment, along with this system and performance. Several key elements for the advancement of CW-MFC technology such as bioelectricity, reactor configurations, plant species, and electrode materials, has been comprehensively discussed and future research directions were suggested for further improving the performance. Overall, CW-MFC may offer an eco-friendly approach to protecting the aquatic environment and come with built-in advantages for visual appeal and animal habitats using natural materials such as gravel, soil, electroactive bacteria, and plants under controlled condition.

Salinity-driven nitrogen removal and bacteria community compositions in microbial fuel cell-integrated constructed wetlands

The effects of salinity gradients (500-4000 mg·L-1 NaCl) on electricity generation, nitrogen removal, and microbial community were investigated in a constructed wetland-microbial fuel cell (CW-MFC) system. The result showed that power density significantly increased from 7.77 mW m-2 to a peak of 34.27 mW m-2 as salinity rose, indicating enhanced electron transfer capabilities under saline conditions. At a moderate salinity level of 2000 mg·L-1 NaCl, the removal efficiencies of NH4+-N and TN reached their maximum at 77.34 ± 7.61% and 48.45 ± 8.14%, respectively. This could be attributed to increased microbial activity and the presence of critical nitrogen-removal organisms, such as Nitrospira and unclassified Betaproteobacteria at the anode, as well as Bacillus, unclassified Rhizobiales, Sphingobium, and Simplicispira at the cathode. Additionally, this salinity corresponded with the highest abundance of Exiguobacterium (3.92%), a potential electrogenic bacterium, particularly at the cathode. Other microorganisms, including Geobacter, unclassified Planctomycetaceae, and Thauera, adapted well to elevated salinity, thereby enhancing both electricity generation and nitrogen removal.

Carbide lime as substrates to boost energy recuperation and dyestuff removal in constructed wetland-microbial fuel cell integrated with copper oxide/carbon cloth cathode

Methylene blue (MB) was regarded as a highly toxic and hazardous substance owing to its irreparable hazard and deplorable damage on the ecosystem and the human body. The treatment of this colorant wastewater appeared to be one of the towering challenges in wastewater treatment. In this study, a microbial fuel cell coupled with constructed wetland (CW-MFC) with effective MB elimination and its energy recuperation concurrently based on the incorporation of carbide lime as a substrate in a new copper oxide-loaded on carbon cloth (CuO/CC) cathode system was studied. The crucial influencing parameters were also delved, and the MB degradation and chemical oxygen demand (COD) removal efficiencies were correspondingly incremented by 97.3% and 89.1% with maximum power output up to 74.1 mW m-2 at optimal conditions (0.2 g L-1 carbide lime loading and 500 Ω external resistance). The carbide lime with high calcium ion content was greatly conducive for the enrichment of critical microorganism and metabolic activities. The relative abundances of functional bacteria including Proteobacteria and Actinobacteriota were vividly increased. Moreover, the impressive results obtained in printed ink wastewater treatment with a COD removal efficiency of 81.3% and a maximum power density of 58.2 mW m-2, which showcased the potential application of CW-MFC.

Development of microbial fuel cell integrated constructed wetland (CMFC) for removal of paracetamol and diclofenac in hospital wastewater

Hospital wastewater management has become a significant concern across the globe due to the presence of pharmaceutically active compounds (PhACs) and other toxic substances, which can potentially disrupt ecosystems. The presence of recalcitrant PhACs in hospital wastewater increases the difficulty level for conventional wastewater treatment systems. Furthermore, incorporating advanced oxidation-based treatment systems increase capital and operation costs. To reduce treatment costs, low-cost innovative technology, i.e., composite constructed wetland and microbial fuel cell system (CMFC), has been developed for higher treatment efficiency of PhACs in hospital wastewater along with simultaneous bioelectricity generation as an additional outcome. In this study, influencing operating parameters, such as initial chemical oxygen demand (COD), electrode spacing, and substrate-to-water-depth ratio, were optimized for two plant species: water hyacinth (WH) and duckweed (DW). The optimized systems were run in batch and continuous mode for WH-CMFC and DW-CMFC to treat synthetic hospital wastewater with paracetamol and diclofenac, and the bioelectricity generation was monitored. DW-CMFC system depicted better treatment efficiency and voltage generation as compared to WH-CMFC. In continuous mode, the DW-CMFC system exhibited a removal of 95.3% COD, 97.1% paracetamol, and 87.5% diclofenac. WH-CMFC and DW-CMFC achieved power densities of around 21.26 mW/m2 and 42.93 mW/m2, respectively. The fate of PhACs during and after treatment and toxicity analysis of the transformation products formed were also carried out. Higher bio-electricity generation and efficient wastewater treatment of the DW-CMFC make it a sustainable option for hospital wastewater management.

Transformation from biofiltration unit to hybrid constructed wetland-microbial fuel cell: Improvement of wastewater treatment performance and energy recovery

This study aimed to compare the performance of biofiltration, constructed wetland, and constructed wetland microbial fuel cell (CW-MFC). The transformation from a biofiltration unit to a hybrid CW-MFC was demonstrated with the advantages of improvement of wastewater treatment while generating electricity simultaneously. The introduction of plants to the upper region of the bioreactor enhanced the DO level by 0.8 mg/L, ammonium removal by 5 %, and COD removal by 1 %. The integration of electrodes and external circuits stimulated the degradation rate of organic matter in the anodic region (1 % without aeration and 3 % with aeration) and produced 5.13 mW/m³ of maximum power density. Artificial aeration improved the nitrification efficiency by 38 % and further removed the residual COD to an efficiency of 99 %. The maximum power density was also increased by 3.2 times (16.71 mW/m³) with the aid of aeration. In treating higher organic loading wastewater (3M), the maximum power density showed a significant increment to 78.01 mW/m³ (4.6-fold) and the COD removal efficiency was 98 %. The ohmic overpotential dominated the proportion of total loss (67-91 %), which could be ascribed to the low ionic conductivity. The reduction in activation and concentration loss contributed to the lower internal resistance with the additional aeration and higher organic loading. Overall, the transformation from biofiltration to a hybrid CW-MFC system is worthwhile since the systems quite resemble while CW-MFC could improve the wastewater treatment as well as recover energy from the treated wastewater.

Decomposition of Phosphorus Pollution and Microorganism Analysis Using Novel CW-MFCs under Different Influence Factors

A constructed wetland (CW)-coupled microbial fuel cell (MFC) system was constructed to treat wastewater and generate electricity. The total phosphorus in the simulated domestic sewage was used as the treatment target, and the optimal phosphorus removal effect and electricity generation were determined by comparing the changes in substrates, hydraulic retention times, and microorganisms. The mechanism underlying phosphorus removal was also analyzed. By using magnesia and garnet as substrates, the best removal efficiencies of two CW-MFC systems reached 80.3% and 92.4%. Phosphorus removal by the garnet matrix mainly depends on a complex adsorption process, whereas the magnesia system relies on ion exchange reactions. The maximum output voltage and stabilization voltage of the garnet system were higher than those of the magnesia system. Microorganisms in the wetland sediments and electrode also changed considerably. It indicates that the mechanism of phosphorus removal by the substrate in the CW-MFC system is adsorption and chemical reaction between ions to generate precipitation. The population structure of proteobacteria and other microorganisms has an impact on both power generation and phosphorus removal. Combining the advantages of constructed wetlands and microbial fuel cells also improved phosphorus removal in coupled system. Therefore, when studying a CW-MFC system, the selection of electrode materials, matrix, and system structure should be taken into account to find a method that will improve the power generation capacity of the system and remove phosphorus.

Insights into the decolorization of mono and diazo dyes in single and binary dyes containing wastewater and electricity generation in up-flow constructed wetland coupled microbial fuel cell

The treatment of single and binary azo dyes, as well as the effect of the circuit connection, aeration, and plant on the performance of UFCW-MFC, were explored in this study. The decolorization efficiency of Remazol Yellow FG (RY) (single dye: 98.2 %; binary dye: 92.3 %) was higher than Reactive Black 5 (RB5) (single: 92.3 %; binary: 86.7 %), which could be due to monoazo dye (RY) requiring fewer electrons to break the azo bond compared to the diazo dye (RB5). In contrast, the higher decolorization rate of RB5 in binary dye indicated the removal rate was affected by the electron-withdrawing groups in the dye structure. The closed circuit enhanced about 2% of color and 4% of COD removal. Aeration improved the COD removal by 6%, which could be contributed by the mineralization of intermediates. The toxicity of azo dyes was reduced by 11-26% and the degradation pathways were proposed. The dye removal by the plants was increased with a higher contact time. RB5 was more favorable to be uptook by the plant as RB5 holds a higher partial positive charge. 127.39 (RY), 125.82 (RB5), and 58.66 mW/m³ (binary) of maximum power density were generated. The lower power production in treating the binary dye could be due to more electrons being utilized for the degradation of higher dye concentration. Overall, the UFCW-MFC operated in a closed circuit, aerated, and planted conditions achieved the optimum performance in treating binary azo dyes containing wastewater (dye: 87-92%; COD: 91%) compared to the other conditions (dye: 83-92%; COD: 78-87%).

Prospects and trends in bioelectrochemical systems: Transitioning from CO2 towards a low-carbon circular bioeconomy

Resource scarcity and climate change are the most quested topics in view of environmental sustainability. CO2 sequestration through bioelectrochemical systems is an attractive option for fostering bioeconomy development upon several value-added products generation. This review details the state-of-the-art of bioelectrochemical systems for resource recovery from CO2 along with various biocatalysts capable of utilizing CO2. Two bioprocesses (photo-electrosynthesis and chemolithoelectrosynthesis) were discussed projecting their potential for biobased economy development from CO2. Significance of adopting circular strategies for efficient resource recycling, intensifying product value, integrations/interlinking of multiple process chains for the development of circular bioeconomy were discussed. Existing constrains as well as outlook for near establishment of circular bioeconomy from CO2 is presented by weighing fore-sighted plans with current actions. Need for developing CO2-based circular bioeconomy via innovative business models by analyzing social, technical, environmental and product related aspects are also discussed providing a roadmap of gaps to pursue for attaining practicality.

Microbial electro deionization for waste water treatment - A critical review on methods, applications and mechanism

Electro deionization using microbial communities has been proven as a competent method for desalination and abatement of water pollution by removing ionic chemicals from the target waters. Microbial Desalination Cell (MDC) facilitates microbial deionization which can either support or be a substitute for the conventional desalination methods. Generation of electricity is accomplished by the bio electrochemical oxidation of organic compounds present as contaminants in wastewater which in turn attribute to the migration of ions in MDC system. The present review aims to elucidate the theory, principles and the application of microbial desalination cell and microbial fuel cell (MFC) in treatment of saline and wastewaters. Air cathode MDC and stacked MDC for purification of saline water are found to give promising results. Air pump assisted microbial desalination cell reported 150.39 ppm h^-1 of salt removal with an operational time period of 80 h and showed consistent results. Hence the air cathode assisted MDC showed dominant capacity of salt removal compared to stacked MDC. Also, three major types of microbial fuel cell, namely photosynthetic biofilm MFC, constructive wetland MFC and ceramic membrane supported MFC are reviewed for their potentials in wastewater treatment by deionization method and electricity generation. Complete (100%) removal of chemical oxygen demand was reported by photosynthetic microbial fuel cell operated for 16 days having 435.8 Ω of external resistance. When constructive wetland microbial fuel cell was operated for 10 days with 1000 ohms of external resistance, it exhibited complete (100%) removal of chemical oxygen demand from the wastewater. About 92% of chemical oxygen demand removal was demonstrated by ceramic membrane supported microbial fuel. Compared to ceramic membrane microbial fuel cell, photosynthetic and constructive wetland microbial fuel cell displayed better performance in terms of pollutant removal capacity and economical factor. Ability of the electrogenic species, namely Geobacter, Shewanella, Clostridium and Bacillus and the photosynthetic species, namely Chorella Vulgaris Rhodopsuedomonas, and Scenedesmus abundans in microbial deionization methods and their performance levels reported by several researchers are presented.

Enhanced performance and microbial interactions of shallow wetland bed coupling with functional biocathode microbial electrochemical system (MES)

It is essential to remediate the polluted urban river, which endangers the aquatic creatures and affected human body's senses. The treatment wetland combined with microbial electrochemical system (MES) used for the remediation is becoming a new research focus due to its ideal pollutants removal efficiency and small footprint. Here this paper provided a kind of novel shallow wetland bed coupling with close-circuit microbial electrochemical system (WB-CMES) to remove pollutants in surface water. In contrast to the shallow wetland bed coupling with open-circuit MES (WB-OMES) and the shallow wetland bed without MES (WB), the enhancing effects and pollutants removal pathway were evaluated. After 62-day operation, average TN removal efficiency in WB-CMES was 87.7%, which was 19.7% and 13.8% higher than that of WB-OMES and WB respectively. The rate coefficient k of NO₃^--N degradation in WB-CMES was 1.6 and 1.8 times higher than that in WB-OMES and WB. The results of chlorophyll, protein and superoxide dismutase (SOD) in WB-CMES were 27.3%, 44.3% and 12.9% higher than those in WB. The microbial community structure analysis indicated that electroactive bacteria on anode like Desulfobulbus could oxidize organics and generate electrons to compensate cathode, meanwhile, cathode could enrich more species of functional bacteria like Rhodobacter, Pirellula, Hyphomicrobium, Thauera, which had a synergistic effect on oxygen reduction, nitrogen removal and plant growth. The results indicated that oxygen produced by submerged plants could be utilized by the oxygen-reducing functional biocathode of MES and the proper aerobic and anoxic environment might enhance nitrate removal mainly through simultaneous nitrification and denitrification (SND), aerobic denitrification and anammox. This research provided a novel technology with advantages of simple operation, flexible configuration, easy scale-up and low cost for application in remediation of highly polluted surface water.

Interrelation between macrophytes roots and cathode in constructed wetland-microbial fuel cells: Further evidence

As an essential component in constructed wetland-microbial fuel cells (CW-MFC) system, the macrophytes play multiple roles in bioelectricity generation and decontaminants performance. However, the interrelation between macrophytes roots and cathode has not been fully investigated despite the fact that plant cultivation strategy is a critical issue in practice. For the first time, this study was designed to explore the interaction between macrophytes and cathode in CW-MFC by planting Cyperus altrnlifolius at relatively different positions from the cathode. The results showed that plants exhibited higher bioelectricity generation and dramatically improved pollution removal, as well as the improved richness and diversity of cathode microbes. More significantly, the relative locations between the plant roots and the cathode could lead to different cathode working patterns, while the optimal cathode pattern "plant root-assisted bio- & air-cathode" was formed when the plant roots are directly placed on the air-cathode layer in CW-MFC. The insight into the plant root and cathode relationship lies in whether the "multi-function cathode" can be established. This study contributes to increase the knowledge regarding the presence and behavior of plant roots and cathode throughout a CW-MFC system.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

Towards passive bioremediation of dye-bearing effluents using hydrous ferric oxide wastes: Mechanisms, products and microbiology

A novel, circular economy-inspired approach for the "passive" (non-powered and reagent-free) treatment of dye-bearing effluent is presented. The treatment utilises the biogeochemical interaction of dye-bearing wastewater with hydrous ferric oxide (HFO) bearing sludges. The work presented demonstrates for the first time the reuse of HFO-rich waste sludges from potable water and mine water treatment. The waste was used directly without modification or reagent addition, as media/substrate in simple flow-through reactors for the decolourisation and biodegradation of methyl orange (MO) and mixed dyes textile effluent. Three phases of exploratory proof of concept work were undertaken. Columns containing HFO sludges were challenged with solution of MO, and MO amended with glycerol (Phase I), MO in a synthetic textile effluent recipe (Phase II), and real mixed textile effluent containing a mixture of dyes (Phase III). After an initial lag period extensive decolourisation of dye was observed in all cases at rates comparable with pure strains and engineered bioreactor processes, with evidence of biodegradation beyond simple cleavage of the mono azo chromophore and mineralisation. The microbiology of the initial sludge samples in both cases exhibited a diverse range of iron oxidising and reducing bacteria. However, post experiment the microbiology of sludge evolved from being dominated by Proteobacteria to being dominated by Firmicutes. Distinct changes in the microbial community structure were observed in post-treatment MWTS and WTWS where genera capable of iron and sulphate reduction and/or aromatic amine degradation were identified. Average nitrogen removal rates for the columns ranged from 27.8 to 194 g/m³/day which is higher than engineered sequential anaerobic-aerobic bioreactor. Postulated mechanisms for the fast anaerobic decolourisation, biodegradation, and mineralisation of the dyes (as well nitrogen transformations) include various direct and indirect enzymatic and metabolic reactions, as well as reductive attack by continuously regenerated reductants such as Fe(II), HFO bound Fe(II), FeS, and HS^-. The ability of iron reducers to degrade aromatic rings is also considered important in the further biodegradation and complete mineralisation of organic carbon. The study reveals that abundant and ubiquitous HFO-rich waste sludges, can be used without amendment, as a substrate in simple flow-through bioremediation system for the decolourisation and partial biodegradation of dyes in textile effluent.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.

Novel study on microbial fuel cells via a comprehensive bibliometric and dynamic approach

Microbial fuel cells (MFCs) are eco-friendly and useful bioelectrical devices that harness the natural metabolisms of microbes to produce electrical power directly from organic materials. In this study, a bibliometric analysis is conducted to evaluate MFC research from 2001 to 2018 on the basis of the Science Citation Index Expanded database. Overall, MFC research has experienced a dramatic increase over last 18 years, with an exponential growth in the accumulated number of publications. Most publications are closely related to the industrialization and commoditization of MFCs, along with environmental issues, which are currently the biggest global challenges in MFC studies. A small proportion (4.34%) of the scientific journals published more than half (54.34%) of the total articles in the MFC field. Articles from the top 10 countries/regions accounted for the majority (83.16%) of the total articles, clearly indicating that advanced MFC technologies are currently dominated by these countries/regions. Moreover, an increasing number of MFC researchers are considering two-chamber and three-chamber MFC reactions. In particular, they are focusing on environmental technology instead of merely improving the efficiency of electricity generation. Materials research in the MFC field is still a popular area worldwide, and many researchers have focused on novel and eco-friendly cathode and anode developments. Meanwhile, only a few MFC studies are concerned with biological research.

Constructed wetlands for textile wastewater remediation: A review on concept, pollutant removal mechanisms, and integrated technologies for efficiency enhancement

Textile industries are among the ecologically unsustainable industries that release voluminous wastewater threatening ecosystem health. The constructed wetlands (CWs) are low-cost eco-technological interventions for the management of industrial wastewaters. The CWs are self-sustaining remediation systems that do not require an external source of energy and encompass simple operational mechanisms including biological (bioremediation and phytoremediation), chemical, and physical processes for pollutant removal. This review idiosyncratically scrutinizes the recent advances and developments in CWs, and their types employed for textile wastewater treatment. The major focus is on mechanisms involved during the removal of contaminants from textile wastewater in CWs and factors affecting the performance of the system. The article also discusses the State-of-the-Art integrated technologies e.g., CW-MFCs/algal ponds/sponge iron coupled systems, for the performance and sustainability enhancement of CWs. All the important aspects together with the technology amalgamation are critically synthesized for establishing suitable strategies for CW-based textile wastewater treatment systems.

Innovative constructed wetland coupled with microbial fuel cell for enhancing diazo dye degradation with simultaneous electricity generation

A novel earthen separator-based dual-chambered unplanted core of constructed wetland coupled with microbial fuel cell was developed for studying the microbe-material interaction and their effect on treatment performance and electricity generation. The constructed wetland integrated microbial fuel cell was evaluated for the degradation of high molecular weight diazo Congo red dye as a model pollutant. The system exhibited 89.99 ± 0.04% of dye decolorization and 95.80 ± 0.71% of chemical oxygen demand removal efficiency from an initial concentration of 50 ± 10 mg/L and 750 ± 50 mg/L, respectively. Ultraviolet-Visible spectrophotometric and gas chromatography-mass spectrometric analysis revealed naphthalene and phenol as mineralized products. The developed system achieved high power density and current density generation of 235.94 mW/m³ and 1176.4 mA/m³, respectively. Results manifested that dual-chambered constructed wetland coupled with microbial fuel cell has a high capability of dye decolorization and toxicity abatement with appreciable simultaneous bioelectricity generation owing to the significantly low internal resistance of 100 Ω.

Mapping Research on Microbial Fuel Cells in Wastewater Treatment: A Co-Citation Analysis

Microbial fuel cells (MFCs) are promising technologies, aiming at treating different types of industrial and domestic wastewater. In recent years, more and more publications focusing on wastewater treatment have been published. Based on the retrieval of publications from Web of Science Core Collection database, the new emerging trends of microbial fuel cells in wastewater treatment was evaluated with a scientometric analysis method from 1995 to 2020. All publications downloaded from (WOS) were screened by inclusion criteria, and 2233 publications were obtained for further analysis. Document co-citation and burst detection of MFCs in wastewater treatment were analyzed and visualized by software of CiteSpace. Our study indicated that “Environmental Science” is the most popular discipline, while the journal of Bioresource Technology published the greatest quantity of articles in the field of MFCs applied wastewater treatment. China and the Chinese Academy of Science are the most productive country and institution, respectively. “Azo dye” has become the new research topic, which indicates the application area and the development of MFCs. The performance of MFCs for wastewater treatment has been widely discussed. The findings of this study may ameliorate the researcher in seizing the frontier of MFCs in wastewater treatment.

Current advances in microbial fuel cell technology toward removal of organic contaminants - A review

At present, water pollution and demand for clean energy are most pressing global issues. On a daily basis, huge quantity of organic wastes gets released into the water ecosystems, causing health related problems. The need-of-the-hour is to utilize proficient and cheaper techniques for complete removal of harmful organic contaminants from water. In this regard, microbial fuel cell (MFC) has emerged as a promising technique, which can produce useful electrical energy from organic wastes and decontaminate polluted water. Herein, we have systematically reviewed recently published results, observations and progress made on the applications of MFCs in degradation of organic contaminants, including organic synthetic dyes, agro pollutants, health care contaminants and other organics (such as phenols and their derivatives, polyhydrocarbons and caffeine). MFC-based hybrid technologies, including MFC-constructed wetland, MFC-photocatalysis, MFC-catalysis, MFC-Fenton process, etc., developed to obtain high removal efficiency and bioelectricity production simultaneously have been discussed. Further, this review assessed the influence of factors, such as nature of electrode catalysts, organic pollutants, electrolyte, microbes and operational conditions, on the performance of pristine and hybrid MFC reactors in terms of pollutant removal efficiency and power generation simultaneously. Moreover, the limitations and future research directions of MFCs for wastewater treatment have been discussed. Finally, a conclusive summary of the findings has been outlined.

A taxonomy of design factors in constructed wetland-microbial fuel cell performance: A review

The past decade has seen the rapid development of constructed wetland-microbial fuel cell (CW-MFC) technology in many aspects. The first publication on the combination of constructed wetland (CW) and microbial fuel cell (MFC) appeared in 2012, subsequently, research on the subject has grown exponentially to improve the performance of CW-MFCs in their dual roles of wastewater treatment and power generation. Although significant research has been conducted on this technology worldwide, a comprehensive and critical review of effective controlling parameters is lacking. More broadly, research is needed to draw up-to-date conclusions on recent developments and to identify knowledge gaps for further studies. This review paper systematically enumerates and reviews research studies published in this area to determine the key design factors and their role in CW-MFC performance. Moreover, a taxonomy of all CW-MFC design parameters has been synthesised from the literature. Importantly, this original work provides a comprehensive conceptual framework for future researchers, designers, builders, and users to understand CW-MFC technology. Within the taxonomy, parameters are placed in three main categories (physical/environmental, chemical, and biological/electrochemical) and comprehensive details are given for each parameter. Finally, a comprehensive summary of the parameters has been tabulated showing their impact on CW-MFC operation, design recommendations from literature, and the significant research gaps that this review has identified within the existing literature. It is hoped that this paper will provide a clear and rich picture of this technology at its current stage of development and furthermore, will facilitate a deeper understanding of CW-MFC performance for long-term and large-scale development.

Nano-porous bimetallic CuCo-MOF-74 with coordinatively unsaturated metal sites for peroxymonosulfate activation to eliminate organic pollutants: Performance and mechanism

The importance of clean water resources for maintaining sustainable development of society is self-evident. In this study, bimetallic metal-organic framework (CuCo-MOF-74) was synthesized and characterized by XRD, FT-IR, SEM, TEM, BET, and XPS techniques. The structural analysis results revealed that CuCo-MOF-74 was nano-porous materials with coordinatively unsaturated metal sites. With the addition of PMS, Cu₁Co₁-MOF-74 exhibited high activity for methylene blue (MB) removal (100% degradation) within 30 min under low 50 mg/L catalyst dosage. The effects of catalyst dosage, PMS dosage, MB concentration, initial pH, and common anions were evaluated. Quenching reactions and EPR studies revealed the coexistence of sulfate radical (SO₄^•-), hydroxyl radical (·OH), and singlet oxygen (¹O₂), which was attributed to the potential in-situ recycling of cobalt and copper species (Co(III)→Co(II), Cu(II)→Cu(I))). Fukui index (f⁰) and dual descriptor (Δf) by Density functional theory (DFT) calculations were applied to predict the most reactive sites of MB. Meanwhile, the possible degradation pathway of MB was proposed with the help of oxidative intermediates identified by UPLC-MS.

Organic matter removal and nitrogen transformation by a constructed wetland-microbial fuel cell system with simultaneous bioelectricity generation

Microbial fuel cells integrated into constructed wetlands have been previously studied. Nevertheless, their application as a suitable treatment for wastewater is still in the developmental stage. In this context, the aim of this study was to evaluate organic matter removal and nitrogen transformation by a microbial fuel cell integrated into a constructed wetland (CWMFC). To accomplish this, three experimental systems were operated under batch-mode conditions over 170 days: i) one was planted with Schoenoplectus californicus (P-CWMFC); ii) another was unplanted (NP-CWMFC); and iii) the third system did not have any electrodes (CW) and was used as a control. Chemical oxygen demand (COD) removal efficiency ranged between 74-87%, 69-81% and 62-72% for the P-CWMFC, NP-CWMFC and CW systems, respectively, with organic loading rates (OLR) ranging from 4.8 to 7.9 g COD/m² d. NH₄⁺-N removal efficiency exceeded 98%, 90% and 83% for P-CWMFC, NP-CWMFC and CW, respectively. Wastewater treatment performance was improved due to anaerobic oxidation that occurred on the anodes. Organic matter removal was 18% higher in closed-circuit mode than in open-circuit mode in both integrated systems (P-CWMFC and NP-CWMFC), and these differences were significant (p < 0.05). With respect to the performance of microbial fuel cells, the maximum power density (8.6 mW/m²) was achieved at an organic loading rate of 7.9 g COD/m² d with an internal resistance and coulombic efficiency of 251 Ω and 2.4%, respectively. The results obtained in this work can provide positive impacts on CW development by enhancing anaerobic degradation without forced aeration.

Mapping the field of constructed wetland-microbial fuel cell: A review and bibliometric analysis

The embedding microbial fuel cell (MFC) into constructed wetlands (CW) to form CW-MFC bears the potential to obtain bioelectricity and a clean environment. In this study, a bibliometric analysis using VOSviewer based on Web of Science data was conducted to provide an overview by tracing the development footprint of this technology. The countries, institutions, authors, key terms, and keywords were tracked and corresponding mapping was generated. From 2012 to September 2020, 442 authors from 129 organizations in 26 countries published 135 publications in 42 journals with total citation of 3139 times were found. The key terms analysis showed four clusters: bioelectricity generation performance, mechanism study, refractory pollutants removal, and enhanced conventional contaminants removal. Further research themes include exploring the biochemical properties of electrochemically active bacteria, emerging contaminants removal, effective bioelectricity harvest and the use, and biosensor development as well as scaling-up for real field application. The bibliometric results provide valuable references and information on potential research directions for future studies.

Robust nitrate removal and bioenergy generation with elucidating functional microorganisms under carbon constraint in a novel multianode tidal constructed wetland coupled with microbial fuel cell

This study investigated synthetic wastewater treatment under low inflow C/N ratio and characterized NO₃^--N-transforming and electricity-producing bacteria in a multi-anode tidal constructed wetland-microbial fuel cell (TFCW-MFC). The optimal concurrent average removal rates of NH₄⁺-N and NO₃^--N were 73% and 78%, respectively, under a flood/rest/flood time of 4 h/2h/4h in "tide" mode accompanied by one recirculation. The lowest NO₃^--N concentration among all anodes was observed when the electrode gap was 45 cm. Similarly, the 45 cm anode exhibited selective enrichment of Variovorax and Azoarcus. Correction analysis showed that the high relative abundance of Azoarcus was crucial in enhancing NO₃^--N removal, and the internal resistance significantly decreased as the relative abundance of Acidovorax increased. These results suggest that NO₃^--N removal and bioelectricity generation can be promoted in a TFCW-MFC with limited carbon by improving the culture conditions for specific genera.

A review on the contribution of electron flow in electroactive wetlands: Electricity generation and enhanced wastewater treatment

In less than a decade, bioelectrochemical systems/microbial fuel cell integrated constructed wetlands (electroactive wetlands) have gained a considerable amount of attention due to enhanced wastewater treatment and electricity generation. The enhancement in treatment has majorly emanated from the electron transfer or flow, particularly in anaerobic regions. However, the chemistry associated with electron transfer is complex to understand in electroactive wetlands. The electroactive wetlands accommodate diverse microbial community in which each microbe set their own potential to further participate in electron transfer. The conductive materials/electrodes in electroactive wetlands also contain some potential, due to which, several conflicts occur between microbes and electrode, and results in inadequate electron transfer or involvement of some other reaction mechanisms. Still, there is a considerable research gap in understanding of electron transfer between electrode-anode and cathode in electroactive wetlands. Additionally, the interaction of microbes with the electrodes and understanding of mass transfer is also essential to further understand the electron recovery. This review mainly deals with the electron transfer mechanism and its role in pollutant removal and electricity generation in electroactive wetlands.

Changes in electricity production and microbial community evolution in constructed wetland-microbial fuel cell exposed to wastewater containing Pb(II)

Two constructed wetland microbial fuel cell (CW-MFC) devices, experimental group (EG, with 5 mg/L Pb(II) addition) and control group (CG) were built to explore the changes in power generation, wastewater purification and microbial community structure under Pb(II) stress. The voltage of EG (343.16 ± 12.14 mV) was significantly higher (p < 0.01) than that of CG (295.49 ± 13.91 mV), and the highest power density of the EG and CG were 7.432 mW·m^-2 and 3.873 mW·m^-2, respectively. There was no significant difference in the removal of common pollutants between these groups except for the NH₄⁺-N removal efficiency, which was probably caused by the inhibition of the bioactivity of Comamonas (AOB) in the anode of the experimental group by Pb(II). Pb(II) was effectively removed by CW-MFC (84.86 ± 3%), and the abundant amount of fulvic acid-like matter in the extracellular polymeric substance (EPS) of the EG contributed to its removal. The presence of Pb(II) had a negative effect on both microbial community diversity and species richness. The abundance of a lead resistance gene, pbrT, decreased with long-term Pb(II) pressure. This is evidence of microbial adaptation to Pb(II).

Outlook on the Role of Microbial Fuel Cells in Remediation of Environmental Pollutants with Electricity Generation

A wide variety of pollutants are discharged into water bodies like lakes, rivers, canal, etc. due to the growing world population, industrial development, depletion of water resources, improper disposal of agricultural and native wastes. Water pollution is becoming a severe problem for the whole world from small villages to big cities. The toxic metals and organic dyes pollutants are considered as significant contaminants that cause severe hazards to human beings and aquatic life. The microbial fuel cell (MFC) is the most promising, eco-friendly, and emerging technique. In this technique, microorganisms play an important role in bioremediation of water pollutants simultaneously generating an electric current. In this review, a new approach based on microbial fuel cells for bioremediation of organic dyes and toxic metals has been summarized. This technique offers an alternative with great potential in the field of wastewater treatment. Finally, their applications are discussed to explore the research gaps for future research direction. From a literature survey of more than 170 recent papers, it is evident that MFCs have demonstrated outstanding removal capabilities for various pollutants.

Effects of substrate type on denitrification efficiency and microbial community structure in constructed wetlands

Three constructed wetland systems were established to treat saline sewage via high-porosity ceramsite, activated carbon, and low-porosity sand: A (ceramsite + activated carbon + sand), B (sand + activated carbon + ceramsite), and C (sand). The distribution of dissolved oxygen in these systems varied with different filling methods with the best removal efficiency of ammonium nitrogen and total nitrogen observed in system B (97.4 and 96.2%, respectively). The 16S rDNA amplicon sequencing results showed that all the systems had a high abundance of salt-tolerant denitrifiers, and the filling method significantly impacted denitrifying bacteria (e.g., Vibrio and Planctomyces) in the substrate. System B had more diverse dissolved oxygen conditions than system A and showcased aerobic nitrification-denitrification and anaerobic ammonium oxidation pathways. Therefore, the use of substrates with different porosities can improve the dissolved oxygen supply and enhance nitrogen removal efficiency in constructed wetlands.

Constructed wetland-microbial fuel cell for azo dyes degradation and energy recovery: Influence of molecular structure, kinetics, mechanisms and degradation pathways

Complete degradation of azo dye has always been a challenge due to the refractory nature of azo dye. An innovative hybrid system, constructed wetland-microbial fuel cell (CW-MFC) was developed for simultaneous azo dye remediation and energy recovery. This study investigated the effect of circuit connection and the influence of azo dye molecular structures on the degradation rate of azo dye and bioelectricity generation. The closed circuit system exhibited higher chemical oxygen demand (COD) removal and decolourisation efficiencies compared to the open circuit system. The wastewater treatment performances of different operating systems were ranked in the decreasing order of CW-MFC (R1 planted-closed circuit) > MFC (R2 plant-free-closed circuit) > CW (R1 planted-open circuit) > bioreactor (R2 plant-free-open circuit). The highest decolourisation rate was achieved by Acid Red 18 (AR18), 96%, followed by Acid Orange 7 (AO7), 67% and Congo Red (CR), 60%. The voltage outputs of the three azo dyes were ranked in the decreasing order of AR18 > AO7 > CR. The results disclosed that the decolourisation performance was significantly influenced by the azo dye structure and the moieties at the proximity of azo bond; the naphthol type azo dye with a lower number of azo bond and more electron-withdrawing groups could cause azo bond to be more electrophilic and more reductive for decolourisation. Moreover, the degradation pathway of AR18, AO7 and CR were elucidated based on the respective dye intermediate products identified through UV-Vis spectrophotometry, high-performance liquid chromatography (HPLC), and gas chromatograph-mass spectrometer (GC-MS) analyses. The CW-MFC system demonstrated high capability of decolouring azo dyes at the anaerobic anodic region and further mineralising dye intermediates at the aerobic cathodic region to less harmful or non-toxic products.

Recent Advances in Anodes for Microbial Fuel Cells: An Overview

The recycling and treatment of wastewater using microbial fuel cells (MFCs) has been attracting significant attention as a way to control energy crises and water pollution simultaneously. Despite all efforts, MFCs are unable to produce high energy or efficiently treat pollutants due to several issues, one being the anode's material. The anode is one of the most important parts of an MFC. Recently, different types of anode materials have been developed to improve the removal rate of pollutants and the efficiency of energy production. In MFCs, carbon-based materials have been employed as the most commonly preferred anode material. An extensive range of potentials are presently available for use in the fabrication of anode materials and can considerably minimize the current challenges, such as the need for high quality materials and their costs. The fabrication of an anode using biomass waste is an ideal approach to address the present issues and increase the working efficiency of MFCs. Furthermore, the current challenges and future perspectives of anode materials are briefly discussed.

Effects of nZVI dosing on the improvement in the contaminant removal performance of constructed wetlands under the dye stress

In this study, different dosages of nanoscale zero-valent iron (nZVI) were used to improve the nitrogen removal efficiency in CWs under different C/N ratios and dye stress conditions. The addition of nZVI enhanced the dye and nitrogen removal efficiencies in constructed wetlands (CWs) through chemical reduction and biological denitrification processes. However, total nitrogen (TN) and dye removal efficiencies firstly increased and then decreased with the increases of the nZVI dosage and influent COD/N (C/N) ratio. Under the influent C/N ratio of 5, the higher TN removal efficiencies (80.2%, 55.1%, and 69.14% under 25 mg/L, 50 mg/L, and 75 mg/L dye concentration, respectively) and higher COD removal efficiencies (48.3%, 74.95%, and 30.76% under 25 mg/L, 50 mg/L, and 75 mg/L dye concentration, respectively) were obtained in CWs by adding the optimal nZVI dosage (0.1 g/L). The dye removal efficiencies in CWs with nZVI at C/N = 1 (75%-91%) and at C/N = 5 (81%-97%) were all significantly higher than that in CWs without nZVI (60%-82%). Moreover, the functional bacteria for nitrogen removal in denitrification and the dye degradation (Zoogloea and Acinetobacter) were enriched in CWs with 0.1 g/L nZVI.

Electricity production enhancement in a constructed wetland-microbial fuel cell system for treating saline wastewater

The use of constructed wetlands in combination with microbial fuel cells (CW-MFC) to treat saline wastewater may enhance electricity production by increasing the ionic strength, reducing internal resistance and stimulating microbes to accelerate electron transfer. In this study, salinity did not significantly inhibit the removal of TP and COD, but TN and NH₄⁺-N removal efficiencies during saline wastewater treatment (ST) were significantly lower than during non-saline wastewater treatment (NT). However, salinity significantly increased the power density (16.4 mW m^-2 in ST and 3.9 mW m^-2 in NT, a 4-fold enhancement) by increasing the electron transfer rate and reducing internal resistance (140.29 Ω in ST and 415.21 Ω in NT). The peptides in extracellular polymeric substances (EPS) acted as electron shuttles to promote the migration of electrons and protons in ST. From start-up to stable operation, though the microorganisms in ST were reduced in diversity relative to NT, the proportion of electrochemically active bacteria (EAB), such as Ochrobactrum, significantly increased (p < 0.05) and gradually predominated in the microbial community.

Cu@Co-MOFs as a novel catalyst of peroxymonosulfate for the efficient removal of methylene blue

In this study, for the first time, we describe the single step synthesis of a Cu particle-doped cobalt-based metal-organic framework (Cu@Co-MOF) using a hydrothermal method. The as-prepared materials were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy-energy disperse spectroscopy, thermogravimetry, and X-ray photoelectron spectroscopy, which confirmed the incorporation of zero-valent copper on the surface of the Co-MOFs. The heterogeneous catalytic activity of Cu@Co-MOFs was tested to activate peroxymonosulfate (PMS) for the removal of methylene blue (MB). The ratio of n(Cu)/n(Co) in the Cu@Co-MOFs showed a strong impact on the catalytic activity of the Cu@Co-MOFs, whereas a n(Cu)/n(Co) of 1 : 1 exhibited the best catalytic performance and obtained 100% MB removal within 30 min. The effects of initial pH, reaction temperature, PMS concentration, and catalyst dosages were investigated in this study. The stability and reusability of the Cu@Co-MOFs were also investigated. The results showed a low decline in the MB removal with the increase in cycle numbers, whereas 100% MB was removed by prolonging the reaction time. Heterogeneous reactions taking place in the pores and surface of the Cu@Co-MOFs played an important role in the generation of the sulfate radicals (SO4˙-) and hydroxyl radicals (·OH) that were the primary reactive species responsible for MB degradation.