Effect of filamentous algae in a microalgal-bacterial granular sludge system treating saline wastewater: Assessing stability, lipid production and nutrients removal

Optimizing algal-bacterial systems for efficient sugar cane wastewater treatment: Pollutant removal and biomass resource recovery

Sugarcane wastewater is highly biodegradable; however, conventional single-treatment processes are constrained by its excessive organic load. Here, we integrated anaerobic acidification with microalgal bioaugmentation to establish an algal-bacterial symbiotic system, leveraging metabolic synergies within functional microbial consortia. The results demonstrate that this system enables the synergistic integration of anaerobic and aerobic bacteria with microalgae, forming a highly efficient metabolic network that enhances water purification. By systematically investigating environmental determinants of water purification and biomass dynamics in conjunction with response surface methodology (RSM), we optimized environmental parameters. The optimized parameters included an aeration rate of 267 mL/min, a light intensity of 6985 lx, and a 12:12 h light-dark photoperiod. Under optimized conditions, the system achieved a COD removal efficiency of 98.56 % and a biomass yield of 3.43 g/L, underscoring dual efficacy in organic load reduction, aeration demand minimization, and resource recovery. This work provides a sustainable approach for treating high-strength sugarcane wastewater through integrated algal-bacterial processes.

Algal-bacterial granules for circular bioeconomy: Formation mechanisms and biotechnological applications

Cyanobacteria and microalgae are sustainable and renewable biocatalysts for solar energy harvesting, recovering nutrients from wastewater, reducing greenhouse gas emissions from wastewater treatment plants (WWTPs) and enable creation of a sustainable circular bioeconomy. Pure and axenic cultures of photosynthetic microorganisms have been widely studied for synthesizing bio-based products through improving the metabolic pathways via genetic engineering. However, pure cultures suffer from contamination and separation challenges when considered for environmental applications. Mixed microbial communities comprising of photosynthetic organisms and bacteria in the form of either flocs or granules have recently received a lot of attention due to their potential contribution to wastewater treatment, environmental sustainability and circular bioeconomy. The advantages of algal-bacterial granules (ABG) in WWTPs include effective elimination of contaminants and nutrients, reduction in aeration requirement, and production of biomass feedstock for downstream processing. Although ABG are an attractive option for energy positive wastewater treatment, it is not yet matured as technological option for deployment in full-scale WWTPs. Moreover, several aspects of ABG including synergistic metabolism, granulation mechanisms, granular stability, bioreactor operating conditions, cell-cell interactions, extracellular polymeric substances and bio-based products deserve more intense research. This article provides a detailed overview of algal-bacterial communities, their occurrence in natural environments, ABG cultivation in engineered settings, potential biotechnological applications and the recent progress made towards sustainable biological wastewater treatment and circular bioeconomy.

Peroxisomal biogenesis factor 11 as a novel target to trigger lipid biosynthesis and salt stress resistance in oleaginous Tetradesmus obliquus

To overcome economic challenges in microalgal biofuel production, this study investigates the overexpression of peroxisome-localized peroxisomal biogenesis factor 11 (PEX11) to enhance lipid biosynthesis and improve salt stress resistance in Tetradesmus obliquus, aiming to advance microalgal biofuel production. Transgenic strains PEX11-2-1 and PEX11-2-2 exhibited a 2.13- and 2.51-fold increase in neutral lipid content and more cellular lipid droplets compared to WT, along with lipid yield and biomass escalating to 255.45 and 815.15 mg/L, respectively. This enhancement resulted from the redistribution of carbon precursors, increased intracellular reactive oxygen species, enhanced NADPH synthesis, and upregulation of lipid synthesis genes. Additionally, PEX11 improved salt stress tolerance by upregulating the expression of stress-responsive genes, including SnRK2 and PYRC. Fatty acid profile alterations, with increases in saturated fatty acids C16:0 and monounsaturated fatty acids C18:1, and decreases in polyunsaturated fatty acids, facilitated high-quality biofuel production. These findings highlight novel insights for advancing microalgae-based biorefinery.

Salinity stress and recovery of the algal-bacterial granular sludge (ABGS) system under the influence of different N-acyl-homoserine lactones (AHLs)

The algal-bacterial granular sludge (ABGS) system was established to explore the effect of 1% salinity condition, determine the recovery process following salinity disturbance, and probe the impacts of two N-acyl-homoserine lactones (AHLs) on the system. Exposure to 1% salinity led to the reduction of filaments and an increase in TB-EPS contents within the ABGS system. The phosphorus removal performance of the ABGS system severely decreased at 1% salinity and did not restore fully during the subsequent recovery stage, demonstrating that salinity stress induced long-term inhibition. Oligotrophic bacteria were found to be enriched at 1% salinity, indicating the self-adaptation of the ABGS system against salinity stress. The addition of AHLs helped mitigate the inhibitory effect of salinity stress. Specifically, C6-HSL slowed down the decline in microbial diversity, while 3-oxo-C12-HSL weakened the inhibition on microalgae growth. This study provided novel insights into the effects of salinity stress and AHLs on ABGS systems.

Two-way role of boron in microalgal-bacterial granular sludge: Enhanced signal communication for efficient metabolism

Based on the crucial role of boron in the metabolism of algae and bacteria, this study aimed to investigate the effects of boron on microalgae-bacterial granular sludge (MBGS) system. The addition of boron stimulated the secretion of autoinducer-2 to promote bacterial quorum sensing, which increased the extracellular polymeric substances production by more than 12.5 %. Meanwhile, boron significantly impacted the indole-3-acetic acid levels in microalgae to improve photosynthetic efficiency and increased the abundance of target algae (Chlorophyta and Cyanobacteria) by more than 0.23 times and 0.88 times, respectively. However, the influence of boron was not concentration-dependent, with the optimal concentration as 80 µM. Both boron deficiency and excess can heighten oxidative stress and affect the stability of the MBGS system. This study highlights the essentiality of boron in simultaneously influencing signal communication of algae and bacteria to strengthen synergy, and provides a theoretical basis for strengthening the symbiotic relationship within MBGS.

Microalgae - bacteria based wastewater treatment systems: Granulation, influence factors and pollutants removal

Wastewater treatment based on microalgae and bacteria symbiosis is an environmentally friendly, sustainable technology that has attracted attention recently because of its high efficiency in treating pollutants, saving energy, and short-term biomass recovery. Among them, the granular microalgae and bacteria combination emerges with the advantages of rapid gravity settling, good resistance to adverse environmental conditions, outstanding wastewater treatment performance, and easy biomass recovery. This review aims to clarify the microalgal-bacterial granule (MBG) - based process for wastewater treatment. In particular, MBG characteristics, granulation mechanism, and influence factors on the process are also discussed. The review contributes to the knowledge system related to MBG research in recent years, thereby pointing out research gaps that need to be filled in the future.

Development and challenges of emerging biological technologies for algal-bacterial symbiosis systems: A review

The algal-bacterial symbiosis system (ABSS) is considered as a sustainable wastewater treatment process. This review provides a comprehensive overview of the mechanisms of ABSS for the removal of common pollutant, heavy metals, and especially for emerging pollutants. For the macroscopical level, this review not only describes in detail the reactor types, influencing factors, and the development of the algal-bacterial process, but also innovatively proposes an emerging process that combines an ABSS with other processes, which enhances the efficiency of removing difficult-to-biodegrade pollutants. Further for the microscopic level, interactions between algae and bacteria, including nutrient exchange, signaling transmission and gene transfer, have been deeply discussed the symbiotic relationship with nutrient removal and biomass production. Finally, recommendations are given for the future development of the ABSS. This review comprehensively examines ABSS principles, development, algal-bacterial interactions, and application in wastewater treatment, aiming to deepen theoretical and practical understanding and advance ABSS technology.

Novel insights into the biological state in algal-bacterial granular sludge granulation: Armor-like protection provided by the algal barrier

Algal-bacterial granular sludge (ABGS) composed of microalgae and aerobic granular sludge, is a sustainable and promising technology for wastewater treatment. However, the formation mechanism of ABGS has not been clearly defined, and the direct formation of ABGS in saline wastewater has rarely been investigated. This study proposed novel insights into the granulation process of ABGS by assembling the algal barrier, which was successfully cultivated directly in saline wastewater. The results concluded that ABGS with the algal barrier maintained a higher biomass (MLSS of 7046 ± 61 mg/L), larger particle sizes (1.21 ± 0.06 mm), and better settleability (SVI30 of 46 ± 1 mL/g), enabling efficient pollutants removal. Soluble microbial products (SMP) were found to be closely related to the emergence of the algal barrier. In addition, under salinity stress, the high production of extracellular polymeric substances (EPS, 133.70 ± 1.40 mg/g VSS), specifically TB-EPS (90.29 ± 1.12 mg/g VSS), maintained a crucial role in the formation of ABGS. Further analysis indicated that biofilm producing bacteria Pseudofulvimonas and filamentous eukaryote Streptophyta were the key players in ABGS formation with the algal barrier. Furthermore, the enhancement of key genes and enzymes involved in nitrogen metabolism, TCA cycle, and polysaccharide metabolism suggested a more robust protective effect provided by the algal barrier. This study is expected to advance the application of simultaneous ABGS formation and pollutant removal in wastewater.

Characteristics and performance of algal-bacterial granular sludge in photo-sequencing batch reactors under various substrate loading rates

The algae-bacterial granular sludge (ABGS) technology has garnered significant attention due to its remarkable attributes of low carbon emissions. To investigate the performance of the ABGS system under various substrate loading rates, the parallel photo-sequencing batch reactors (P1 and P2) were set up. The results indicated that chlorophyll-a content and extracellular polymeric substance content were measured at 10.7 ± 0.3 mg/L and 61.4 ± 0.7 mg/g SS in P1 under relatively low substrate loading rate (0.9 kg COD/m3/d and 0.09 kg N/m3/d). Moreover, kinetic study revealed that the maximal specific P uptake rate for P1 reached 0.21 mg P/g SS/h under light conditions, and it achieved 0.078 mg P/g SS/h under dark conditions, highlighting the significant role on phosphorus removal played by algae in the ABGS system. The microbial analysis and scanning electron microscopy confirmed that filamentous algae predominantly colonize the surface in P1, whereas spherical bacteria dominate the surface of granular sludge in P2. Additionally, a diverse array of microorganisms including bacteria, algae, and metazoa such as Rotifers and Nematodes were observed in both systems, providing evidence for the establishment of a symbiotic system. This study not only confirmed the ability of ABGS for efficient N and P removal under different substrate loading conditions but also highlighted its potential to enhance the ecological diversity of the reaction system.

Design, construction and application of algae-bacteria synergistic system for treating wastewater

The wastewater treatment technology of algae-bacteria synergistic system (ABSS) is a promising technology which has the advantages of low energy consumption, good treatment effect and recyclable high-value products. In this treatment technology, the construction of an ABSS is a very important factor. At the same time, the emergence of some new technologies (such as microbial fuel cells and bio-carriers, etc.) has further enriched constructing the novel ABSS, which could improve the efficiency of wastewater treatment and the biomass harvesting rate. Thus, this review focuses on the construction of a novel ABSS in wastewater treatment in order to provide useful suggestions for the technology of wastewater treatment.

Enhanced biological phosphorus removal sustained by aeration-free filamentous microalgal-bacterial granular sludge

The microalgal-bacterial granular sludge (MBGS) based enhanced biological phosphorus removal (EBPR) (MBGS-EBPR) was recently proposed as a sustainable wastewater treatment process. Previous work showed the possibility of obtaining an MBGS-EBPR process starting from mature MBGS and phosphate-accumulating organisms (PAOs) enriched aerobic granular sludge (AGS) and validated the effectiveness of removing carbon/nitrogen/phosphorus with mechanical aeration. The present work evaluated whether the same could be achieved starting from conventional activated sludge and operating under aeration-free conditions in an alternating dark/light photo-sequencing batch reactor (PSBR). We successfully cultivated filamentous MBGS with a high settling rate (34.5 m/h) and fast solid-liquid separation performance, which could be attributed to the proliferation of filamentous cyanobacteria and stimulation of extracellular polymeric substances (EPS) production. The process achieved near-complete steady-state removal of carbon (97.2 ± 1.9 %), nitrogen (93.9 ± 0.7 %), and phosphorus (97.7 ± 1.7 %). Moreover, improved phosphorus release/uptake driven by photosynthetic oxygenation under dark/light cycles suggests the enrichment of PAOs and the establishment of MBGS-EBPR. Batch tests showed similar phosphorus release rates in the dark but significantly lower phosphorus uptake rates in the presence of light when the filamentous granules were disrupted. This indicates that the filamentous structure of MBGS has minor limitations on substrate mass transfer while exerting protective effects on PAOs, thus playing an important role in sustaining the function of aeration-free EBPR. Microbial assays further indicated that the enrichment of filamentous cyanobacteria (Synechocystis, Leptoolybya, and Nodosilinea), putative PAOs and EPS producers (Hydrogenophaga, Thauera, Flavobacterium, and Bdellovibrio) promoted the development of filamentous MBGS and enabled the high-efficient pollutant removal. This work provides a feasible and cost-effective strategy for the startup and operation of this innovative process.

Phycoremediation and valorization of hypersaline pickled mustard wastewater via Chaetoceros muelleri and indigenous bacteria

Hypersaline pickled mustard wastewater (PMW), a typical food wastewater with high nutrient content, was successfully bioremediated via the co-treatment of Chaetoceros muelleri and indigenous bacteria in this study. Chemical oxygen demand, ammonia nitrogen, total nitrogen and total phosphorus in 10 % PMW could be effectively reduced by 82 %, 90 %, 94 % and 96 %, respectively, after 12 days treatment. Oxygen species activities, malondialdehyde content, microalgal biomass, photosynthesis and extracellular polymeric substances were characterized during the treatment to determine the responses of the consortium when exposed to different concentration of PMW. Microbial community analysis demonstrated a significant increase in the relative abundance of Halomonas and Marinobacter in the 10 % PMW after 12 days treatment, which was beneficial for nutrients recycling by the diatoms. Meanwhile, C. muelleri was effective in reducing the relative abundance of potentially pathogenic bacteria Malaciobacter. In conclusion, the work here offers a promising and environmentally friendly approach for hypersaline wastewater treatment.

Treatment of industrial wastewaters by algae-bacterial consortium with Bio-H2 production: Recent updates, challenges and future prospects

Currently, scarcity/security of clean water and energy resources are the most serious problems worldwide. Industries use large volume of ground water and a variety of chemicals to manufacture the products and discharge large volume of wastewater into environment, which causes severe impacts on environment and public health. Fossil fuels are considered as major energy resources for electricity and transportation sectors, which release large amount of CO2 and micro/macro pollutants, leading to cause the global warming and public health hazards. Therefore, algae-bacterial consortium (A-BC) may be eco-friendly, cost-effective and sustainable alternative way to treat the industrial wastewaters (IWWs) with Bio-H2 production. A-BC has potential to reduce the global warming and eutrophication. It also protects environment and public health as it converts toxic IWWs into non or less toxic (biomass). It also reduces 94%, 90% and 50% input costs of nutrients, freshwater and energy, respectively during IWWs treatment and Bio-H2 production. Most importantly, it produce sustainable alternative (Bio-H2) to replace use of fossil fuels and fill the world's energy demand in eco-friendly manner. Thus, this review paper provides a detailed knowledge on industrial wastewaters, their pollutants and toxic effects on water/soil/plant/humans and animals. It also provides an overview on A-BC, IWWs treatment, Bio-H2 production, fermentation process and its enhancement methods. Further, various molecular and analytical techniques are also discussed to characterize the A-BC structure, interactions, metabolites and Bio-H2 yield. The significance of A-BC, recent update, challenges and future prospects are also discussed.

Microalgal-bacterial biofilms for wastewater treatment: Operations, performances, mechanisms, and uncertainties

Microalgal-bacterial biofilms have been increasingly considered of great potential in wastewater treatment due to the advantages of microalgal-bacterial synergistic pollutants removal/recovery, CO2 sequestration, and cost-effective biomass-water separation. However, such advantages may vary widely among different types of microalgal-bacterial biofilms, as the biofilms could be formed on different shapes and structures of attachment substratum, generating "false hope" for certain systems in large-scale wastewater treatment if the operating conditions and pollutants removal properties are evaluated based on the general term "microalgal-bacterial biofilm". This study, therefore, classified microalgal-bacterial biofilms into biofilms formed on 2D substratum, biofilms formed on 3D substratum, and biofilms formed without substratum (i.e. microalgal-bacterial granular sludge, MBGS). Biofilms formed on 2D substratum display higher microalgae fractions and nutrients removal efficiencies, while the adopted long hydraulic retention times were unacceptable for large-scale wastewater treatment. MBGS are featured with much lower microalgae fractions, most efficient pollutants removal, and acceptable retention times for realistic application, yet the feasibility of using natural sunlight should be further explored. 3D substratum systems display wide variations in operating conditions and pollutants removal properties because of diversified substratum shapes and structures. 2D and 3D substratum biofilms share more common in eukaryotic and prokaryotic microbial community structures, while MGBS biofilms are more enriched with microorganisms favoring EPS production, biofilm formation, and denitrification. The specific roles of stratified extracellular polymeric substances (EPS) in nutrients adsorption and condensation still require in-depth exploration. Nutrients removal uncertainties caused by microalgal-bacterial synergy decoupling under insufficient illumination, limited microbial community control, and possible greenhouse gas emission exacerbation arising from microalgal N2O generation were also indicated. This review is helpful for revealing the true potential of applying various microalgal-bacterial biofilms in large-scale wastewater treatment, and will provoke some insights on the challenges to the ideal state of synergistic pollutants reclamation and carbon neutrality via microalgal-bacterial interactions.

Effect of different inocula on the granulation process, reactor performance and biodiesel production of algal-bacterial granular sludge (ABGS) under low aeration conditions

The algal-bacterial granular sludge (ABGS) system is a prospective wastewater treatment technology, but few studies focused on the effects of different inoculum types on the establishment of the ABGS system under low aeration conditions (step-decrease superficial gas velocity from 1.4 to 0.5 cm/s). Results from this study indicated that compared with other inocula, the ABGS formed by co-inoculating aerobic granular sludge (AGS) and targeted algae (Chlorella) exhibited a shorter granulation period (shortened by 15 days), higher total nitrogen (89.4%) and PO43--P (95.0%) removal efficiencies, and a greater yield of fatty acid methyl esters (FAMEs) (9.04 mg/g MLSS). This was possibly attributed to that the functional bacteria (e.g. Thauera, Gemmobacter and Rhodobacter) in the inoculated AGS facilitated the ABGS granulation. The inoculated algae promoted their effective enrichment under illumination conditions and enhanced the production of extracellular polymeric substances, thus improving the stability of ABGS. The enriched algae were attached to the outer layer of the granules, which could provide sufficient oxygen for bacterial metabolism, revealing the inherent mechanisms for the good stability of ABGS under low aeration intensity. Overall, the rapid granulation of ABGS can be achieved by inoculating optimal inocula under low aeration conditions, which is convenient and economically feasible, and motivates the application of algal-bacterial consortia.

Advances, challenges, and prospects in microalgal-bacterial symbiosis system treating heavy metal wastewater

Heavy metal (HM) pollution, particularly in its ionic form in water bodies, is a chronic issue threatening environmental security and human health. The microalgal-bacterial symbiosis (MABS) system, as the basis of water ecosystems, has the potential to treat HM wastewater in a sustainable manner, with the advantages of environmental friendliness and carbon sequestration. However, the differences between laboratory studies and engineering practices, including the complexity of pollutant compositions and extreme environmental conditions, limit the applications of the MABS system. Additionally, the biomass from the MABS system containing HMs requires further disposal or recycling. This review summarized the recent advances of the MABS system treating HM wastewater, including key mechanisms, influence factors related to HM removal, and the tolerance threshold values of the MABS system to HM toxicity. Furthermore, the challenges and prospects of the MABS system in treating actual HM wastewater are analyzed and discussed, and suggestions for biochar preparation from the MABS biomass containing HMs are provided. This review provides a reference point for the MABS system treating HM wastewater and the corresponding challenges faced by future engineering practices.

Filamentous cyanobacteria and hydrophobic protein in extracellular polymeric substances facilitate algae-bacteria aggregation during partial nitrification

In algae-bacteria symbiotic wastewater treatment, the excellent settling performance of algae-bacteria aggregates is critical for biomass separation and recovery. Here, the composition of extracellular polymeric substances (EPS), microbial profiles, and functional genes of algae-bacteria aggregates were investigated at different solid retention times (SRTs) (10, 20, and 40 d) during partial nitrification in photo sequencing bioreactors (PSBRs). Results showed that SRTs greatly influenced the nitrogen transformation and the formation and morphological structure of algae-bacteria aggregates. The highest nitrite accumulation, the largest particle size (~1.54 mm) and the best settling performance were observed for the algae-bacteria aggregates in the PSBR with an SRT of 10 d, where the abundant occurrence of filamentous cyanobacteria with the highest ratio of chlorophyll a/b and the lowest EPS amount with the highest protein-to-polysaccharide ratio were observed. In particular, the EPS at 10 d of SRT contained a higher amount of protein-related hydrophobic groups and a lower ratio of α-helix/(β-sheet + random coil), indicating a looser protein structure, which might facilitate the formation and stabilization of algae-bacteria aggregates. Moreover, algal-bacterial aggregation greatly depended on the composition and evolution of filamentous cyanobacteria (unclassified _o__Oscillatoriales and Phormidium accounted for 56.29 % of the identified algae at SRT 10 d). The metagenomic analysis further revealed that functional genes related to amino acid metabolism (e.g., genes of phenylalanine, tyrosine, and tryptophan biosynthesis) were expressed at high levels within 10 d of SRT. Overall, this study demonstrates the influence of EPS structures and filamentous cyanobacteria on algae-bacteria aggregation and reveals the biological mechanisms driving photogranule structure and function.

Enhancing biolipid production and self-flocculation of Chlorella vulgaris by extracellular polymeric substances from granular sludge with CO2 addition: Microscopic mechanism of microalgae-bacteria symbiosis

Microalgae-bacteria symbiotic systems were known to have great potential for simultaneous water purification and resource recovery, among them, microalgae-bacteria biofilm/granules have attracted much attention due to its excellent effluent quality and convenient biomass recovery. However, the effect of bacteria with attached-growth mode on microalgae, which has more significance for bioresource utilization, has been historically ignored. Thus, this study attempted to explore the responses of C. vulgaris to extracellular polymeric substances (EPS) extracted from aerobic granular sludge (AGS), for enhancing the understanding of microscopic mechanism of attached microalgae-bacteria symbiosis. Results showed that the performance of C. vulgaris was effectively boosted with AGS-EPS treatment at 12-16 mg TOC/L, highest biomass production (0.32±0.01 g/L), lipid accumulation (44.33±5.69%) and flocculation ability (20.83±0.21%) were achieved. These phenotypes were promoted associated with bioactive microbial metabolites in AGS-EPS (N-acyl-homoserine lactones, humic acid and tryptophan). Furthermore, the addition of CO2 triggered carbon flow into the storage of lipids in C. vulgaris, and the synergistic effect of AGS-EPS and CO2 for improving microalgal flocculation ability was disclosed. Transcriptomic analysis further revealed up-regulation of synthesis pathways for fatty acid and triacylglycerol that was triggered by AGS-EPS. And within the context of CO2 addition, AGS-EPS substantially upregulated the expression of aromatic protein encoding genes, which further enhanced the self-flocculation of C. vulgaris. These findings provide novel insights into the microscopic mechanism of microalgae-bacteria symbiosis, and bring new enlightenment to wastewater valorization and carbon-neutral operation of wastewater treatment plants based on the symbiotic biofilm/biogranules system.

Enhanced alginate-like exopolymers recovery from algal-bacterial aerobic granular sludge: Optimal cultivation condition and contribution of bacteria and microalgae during the transport/storage period

Extracting alginate-like exopolymers (ALE) is a promising approach for valuable resources recovery from excess algal-bacterial aerobic granular sludge (AGS) to achieve circular bioeconomy and environmental sustainability in wastewater treatment plants (WWTPs). In this study, six batch cultivation tests were conducted to investigate the optimal cultivation duration or transport/storage period, light intensity, and temperature for algal-bacterial AGS after sampling and before further processing or ALE extraction. At a light intensity of 5 klux, the highest ALE content (36.33 mg/g-VSS) was detected at a low temperature of 10°C, which increased by 300% from its original level after 6-h cultivation. Results from levofloxacin (LVX) exposure and dark condition imply that microalgae contributed more to ALE synthesis in the algal-bacterial granules. This work not only provides a better understanding of the mechanisms involved in ALE biosynthesis but also offers useful guidance for maintaining or improving ALE recovery after algal-bacterial biomass sampling.

From waste-activated sludge to algae: a self-reliant cultivation process in photoreactors using saline conditions

In this study, microalgae-bacteria (MB) systems using saline conditions (3 and 5% salinity) were built in order to use waste-activated sludge (AS) as raw material for cultivating lipid-rich microalgae. Algae were observed to be flourishing in 60 days of operation, which totally used the N and P released from the sludge biomass. A prominent improvement of lipid content in MB consortia was obtained under algae growth and salinity stimulation, which occupied 119-136 mg/g-SS rather than a low content of 12.1 mg/g-SS in AS. Lipid enrichment also brought a 3.1-3.3 times total heat release (THR) in the MB biomass. The marine spherical algae Porphyridium, as well as filamentous Geitlerinema, Nodularia, Leptolyngbya were found to be the main lipid producers and self-flocculated to 23.0% (R1) and 33.5% (R2) volume under the effect of residue EPS. This study had a big meaning in not only waste sludge reduction but also in manufacturing useful bioenergy products.

Evaluating the role of algae in algal-bacterial granular sludge: Nutrient removal, microbial community and granular characteristics

Algal-bacterial granular sludge (ABGS) and bacterial granular sludge (BGS, control group) were operated over 240 days to investigate the role of algae in treating synthetic municipal wastewater. The results showed that algae significantly improved the removal efficiency of total nitrogen (TN). The nitrogen removal load of ABGS was 2.6 mg-N/g-VSS/day (22.8 %, light) and 1.1 mg-N/g-VSS/day (9.6 %, dark) higher than that of BGS, respectively, which was attributed to algae enhanced NH₃-N removal capacity in the anaerobic stage and increased the utilization efficiency of organics in denitrification. Algae increased the relative abundance of denitrifying bacteria, and ABGS (28.83 %) was higher than BGS (14.28 %). Moreover, the dominant phylum of algae was Chlorophyta (98.39 %), the chlorophyll-a was sustained at 1.28 ± 0.26 mg/g-VSS. Algae significantly increased the content of extracellular polymeric substances (EPS), and the increased polysaccharide came from the tightly bound EPS. This study expands the understanding of the role of algae in ABGS.