Sandwich electrochemical immunoassay for the detection of Staphylococcal enterotoxin B based on immobilized thiolated antibodies

An electrochemical/SERS dual-mode immunosensor using TMB/Au nanotag and Au@2D-MoS2 modified screen-printed electrode for sensitive detection of prostate cancer biomarker

This study describes a novel dual-mode immunosensor that combines electrochemical (EC) and surface-enhanced Raman scattering (SERS) techniques for the detection of prostate-specific antigen (PSA), a biomarker associated with prostate cancer. The sensor consists of a nanocomposite of gold nanoparticles (AuNPs) deposited on two-dimensional (2D) molybdenum disulfide (Au@MoS2) modified on a working carbon electrode of a screen-printed electrode (SPE). Subsequently, the primary antibody (Ab1) is immobilized on the modified electrode, creating Ab1/Au@MoS2/SPE for specific recognition of the target PSA. In parallel, AuNPs are conjugated with a secondary antibody (Ab2) and a probe molecule, 3,3',5,5'-tetramethylbenzidine (TMB), leading nanotags (TMB/Ab2/AuNPs) formation exhibiting strong SERS and EC responses. Upon the presence of the target, sandwich immunocomplexes can be formed through antigen-antibody interactions (Ab1-PSA-Ab2). The differential pulse voltammetry (DPV) technique is employed for EC detection mode, while a handheld Raman spectrometer with a 785 nm excitation laser is utilized to collect SERS signals. The developed system demonstrates excellent selectivity and sensitivity, with low limits of detection (LODs) of 3.58 pg mL-1 and 4.83 pg mL-1 for EC and SERS sensing, respectively. Importantly, the dual-mode immunosensor proves effective quantifying PSA protein in human serum samples with good recovery. Given its high sensitivity and proficiency in analyzing biological samples, this proposed immunosensor holds promise as an alternative tool for the early diagnosis of cancers.

Electrochemical aptasensor for sensitive detection of staphylococcal enterotoxin type A in milk and fruit juice

An aptamer-based electrochemical sensor for the sensitive detection of staphylococcal enterotoxin type A (SEA) is presented. The truncated aptamer AptSEA1.4 used in this work was screened using computational techniques, which reduced the cost of the SELEX screening process. The aptamer-SEA interactions were confirmed by employing circular dichroism (CD) and fluorescence spectroscopy. Afterwards, for developing an electrochemical aptasensor, a fabricated GNR/FTO aptasensor was prepared and characterized using scanning electron microscopy-energy-dispersive X-ray analysis (SEM-EDX), atomic force microscopy (AFM), cyclic voltammetry (CV), and square wave voltammetry (SWV). A detailed investigation of aptamer and SEA interaction in the presence of various experimental conditions was also conducted through SWV and electrochemical impedance spectroscopy (EIS). The aptamer exhibits a strong affinity for SEA, with a dissociation constant (Kd) of 19.93 nM. The aptasensor is sensitive, with a lower limit of detection of 12.44 pg mL-1. It has good stability, repeatability, and specificity and has displayed highly specific and sensitive detection SEA in spiked packaged mixed fruit juice and milk, with a recovery of 95-110%. The aptasensor has high promise for detecting SEA in other food items.

A comprehensive review on the detection of Staphylococcus aureus enterotoxins in food samples

Staphylococcal enterotoxins (SEs), the major virulence factors of Staphylococcus aureus, cause a wide range of food poisoning and seriously threaten human health by infiltrating the food supply chain at different phases of manufacture, processes, distribution, and market. The significant prevalence of Staphylococcus aureus calls for efficient, fast, and sensitive methods for the early detection of SEs. Here, we provide a comprehensive review of the hazards of SEs in contaminated food, the characteristic and worldwide regulations of SEs, and various detection methods for SEs with extensive comparison and discussion of benefits and drawbacks, mainly including biological detection, genetic detection, and mass spectrometry detection and biosensors. We highlight the biosensors for the screening purpose of SEs, which are classified according to different recognition elements such as antibodies, aptamers, molecularly imprinted polymers, T-cell receptors, and transducers such as optical, electrochemical, and piezoelectric biosensors. We analyzed challenges of biosensors for the monitoring of SEs and conclude the trends for the development of novel biosensors should pay attention to improve samples pretreatment efficiency, employ innovative nanomaterials, and develop portable instruments. This review provides new information and insightful commentary, important to the development and innovation of further detection methods for SEs in food samples.

Gelatin-assisted fabrication of reduced nanographene oxide for dual-modal imaging of melanoma cells

In this work we report a gelatin-based, simple two-steps approach for fabrication of reduced graphene oxide (rGO-GEL) possessing high stability and biocompatibility, as novel label-free intracellular contrast agents. Gelatin, a biopolymer that is known for its versatility, was employed not only to biocompatibilize the rGO, but also to prevent the aggregation of the GO nanosheets during the reduction process. To confirm the successful reduction process and the attachment of the gelatin to the rGO nanosheets, we employed multiple spectroscopic analyses such as FT-IR, Raman, UV-VIS and photoluminescence, while the morphology and the lateral dimensions of the resulting hybrid rGO-GEL were investigated by Scanning-Transmission Electron Microscopy (STEM). Cellular toxicity test proved that the rGO-GEL nanoflakes are nontoxic for melanoma B16-F10 cells, even at high concentrations. Finally, the intracellular tracking after 24 h of treatment was performed by non-invasive Super-resolution re-scan confocal microscopy as well as Confocal Raman imaging, thus implementing our nanoflakes as a suitable contrast agent candidate for cellular imaging of interest.

The critical experimental aspects for developing pathogen electrochemical biosensors: A lesson during the COVID-19 pandemic

Though the bitter global pandemic posed a severe public health threat, it set an unprecedented stage for different research teams to present various technologies for detecting SARS-CoV-2, providing a rare and hard-won lesson for one to comprehensively survey the core experimental aspects in developing pathogens electrochemical biosensors. Apart from collecting all the published biosensor studies, we focused on the effects and consequences of using different receptors, such as antibodies, aptamers, ACE 2, and MIPs, which are one of the core topics of developing a pathogen biosensor. In addition, we tried to find an appropriate and distinctive application scenario (e.g., wastewater-based epidemiology) to maximize the advantages of using electrochemical biosensors to detect pathogens. Based on the enormous amount of information from those published studies, features that fit and favor wastewater pathogen detection can be picked up and integrated into a specific strategy to perform quantitative measurements in wastewater samples.

Advances in Electrochemical Nano-Biosensors for Biomedical and Environmental Applications: From Current Work to Future Perspectives

Modern life quality is strongly supported by the advances made in biosensors, which has been attributed to their crucial and viable contribution in point-of-care (POC) technology developments. POC devices are exploited for the fast tracing of disease progression, rapid analysis of water, and food quality assessment. Blood glucose meters, home pregnancy strips, and COVID-19 rapid tests all represent common examples of successful biosensors. Biosensors can provide great specificity due to the incorporation of selective bio-recognition elements and portability at significantly reduced costs. Electrochemical biosensor platforms are one of the most advantageous of these platforms because they offer many merits, such as being cheap, selective, specific, rapid, and portable. Furthermore, they can be incorporated into smartphones and various analytical approaches in order to increase their sensitivity and many other properties. As a very broad and interdisciplinary area of research and development, biosensors include all disciplines and backgrounds from materials science, chemistry, physics, medicine, microbiology/biology, and engineering. Accordingly, in this state-of-the-art article, historical background alongside the long journey of biosensing construction and development, starting from the Clark oxygen electrode until reaching highly advanced wearable stretchable biosensing devices, are discussed. Consequently, selected examples among the miscellaneous applications of nanobiosensors (such as microbial detection, cancer diagnosis, toxicity analysis, food quality-control assurance, point of care, and health prognosis) are described. Eventually, future perspectives for intelligent biosensor commercialization and exploitation in real-life that is going to be supported by machine learning and artificial intelligence (AI) are stated.

Rapid electrochemical immunodetection of SARS-CoV-2 using a pseudo-typed vesicular stomatitis virus model

The COVID-19 pandemic has highlighted the need for reliable and accurate diagnostic tools that provide quantitative results at the point of care. Real-time RT-PCR requires large laboratories, a skilled workforce, complex and costly equipment, and labor-intensive sample processing. Despite tremendous efforts, scaling up RT-PCR tests is seemingly unattainable. To date, hundreds of millions of COVID-19 tests have been performed globally, but the demand for timely, accurate testing continues to outstrip supply. Antigen-based rapid diagnostic testing is emerging as an alternative to RT-PCR. However, the performance of these tests, namely their sensitivity, is still inadequate. To overcome the limitations of currently employed diagnostic tests, new tools that are both sensitive and scalable are urgently needed. We have developed a miniaturized electrochemical biosensor based on the integration of specific monoclonal antibodies with a biochip and a measurement platform, and applied it in the detection of Spike S1 protein, the binding protein of SARS-CoV-2. Using electrochemical impedance spectroscopy, quantitative detection of sub-nanomolar concentrations of Spike S1 was demonstrated, exhibiting a broad detection range. To demonstrate the applicability of the biosensor, we have further developed a SARS-CoV-2 pseudovirus based on Spike protein-pseudo-typed VSV platform. Specific detection of different concentrations of pseudovirus particles was feasible in <30 min. This new tool may largely contribute to the fight against COVID-19 by enabling intensive testing to be performed and alleviating most of the hurdles that plague current diagnostics.

Fabrication of polyethyleneimine-functionalized reduced graphene oxide-hemin-bovine serum albumin (PEI-rGO-hemin-BSA) nanocomposites as peroxidase mimetics for the detection of multiple metabolites

The ultrasensitive bioassays are increasingly demanded for disease diagnosis and environmental monitoring. The combined unique natures of the components in nanocomposites have led to their wide applications in bioanalysis. In the current study, a simple strategy for preparing polyethyleneimine-functionalized reduced graphene oxide-hemin-bovine serum albumin (PEI-rGO-Hemin-BSA) nanocomposites as peroxidase mimetics was demonstrated. The developed nanocomposites of PEI-rGO-Hemin-BSA showed an excellent peroxidase-like activity. Importantly, through the glutaradelhyde crosslinking, PEI-rGO-Hemin-BSA could be further simply combined with various oxidases such as glucose oxidase, cholesterol oxidase, lactate oxidase and choline oxidase for the detection and quantitative measurement of multiple metabolites including glucose, cholesterol, l-lactate, and choline. The developed detection strategy, which is sensitive, convenient, low-costed, and in tiny sample consumption, could be expected wide applications in the disease diagnosis and management of metabolite disorders.

An electrochemical aptasensor for staphylococcal enterotoxin B detection based on reduced graphene oxide and gold nano-urchins

Detection of staphylococcal enterotoxin B (SEB) as a bacterial toxin causing severe food poisoning is of great importance. Herein, we developed an electrochemical aptasensor for SEB detection using a screen printed electrode modified with reduced graphene oxide (rGO) and gold nano-urchins (AuNUs). Afterward, the single-stranded DNA probe was attached to the surface of AuNUs on the modified electrode and then the specific aptamer was attached to the probe. In the presence of SEB molecules, the aptamer detached from the electrode surface and after applying the electrochemical signal generator, hematoxylin and the peak current of differential pulse voltammetry (DPV) were recorded. Due to the intercalation mechanism of hematoxylin-DNA interaction, the detachment of aptamer from electrode surface decreased the DPV peak current and the calibration graph (peak current vs SEB concentration) can be used for quantification of SEB. The cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) and also field emission scanning electron microscope imaging were used for electrode characterization. Selectivity experiments of the developed aptasensor showed a very distinct difference between SEB and other nonspecific molecules. A wide linear range from 5.0 to 500.0 fM was achieved and the detection limit was calculated as 0.21 fM. The performance of the aptasensor was checked in spiked food samples as simulated real samples and the results showed no significant difference compared to the synthetic samples. Results of selectivity and repeatability of the aptasensor were satisfactory. In addition, better recovery percentages and also lower standard deviation of aptasensor compared to a commercial ELISA kit of SEB detection proved the superior performance of the proposed aptasensor.

Detecting Biothreat Agents: From Current Diagnostics to Developing Sensor Technologies

Although a fundamental understanding of the pathogenicity of most biothreat agents has been elucidated and available treatments have increased substantially over the past decades, they still represent a significant public health threat in this age of (bio)terrorism, indiscriminate warfare, pollution, climate change, unchecked population growth, and globalization. The key step to almost all prevention, protection, prophylaxis, post-exposure treatment, and mitigation of any bioagent is early detection. Here, we review available methods for detecting bioagents including pathogenic bacteria and viruses along with their toxins. An introduction placing this subject in the historical context of previous naturally occurring outbreaks and efforts to weaponize selected agents is first provided along with definitions and relevant considerations. An overview of the detection technologies that find use in this endeavor along with how they provide data or transduce signal within a sensing configuration follows. Current "gold" standards for biothreat detection/diagnostics along with a listing of relevant FDA approved in vitro diagnostic devices is then discussed to provide an overview of the current state of the art. Given the 2014 outbreak of Ebola virus in Western Africa and the recent 2016 spread of Zika virus in the Americas, discussion of what constitutes a public health emergency and how new in vitro diagnostic devices are authorized for emergency use in the U.S. are also included. The majority of the Review is then subdivided around the sensing of bacterial, viral, and toxin biothreats with each including an overview of the major agents in that class, a detailed cross-section of different sensing methods in development based on assay format or analytical technique, and some discussion of related microfluidic lab-on-a-chip/point-of-care devices. Finally, an outlook is given on how this field will develop from the perspective of the biosensing technology itself and the new emerging threats they may face.

Colorimetric DNAzyme Biosensor for Convenience Detection of Enterotoxin B Harboring Staphylococcus aureus from Food Samples

In the present study, a colorimetric DNAzymes biosensor strategy was devised in combination with immunomagnetic separation for rapid and easy detection of enterotoxin B harboring Staphylococcus aureus from food and clinical samples. The method employs immunocapture of S. aureus and amplification of seb gene by DNAzyme complementary sequence integrated forward primer and with specific reverse primer. The DNAzyme sequence integrated dsDNA PCR products when treated with hemin and TMB (3,3',5,5'-tetramethylbenzidine) in the presence of H₂O₂ produce colorimetric signal. A linear relationship of optical signal with the initial template of seb was obtained which could be monitored by visually or spectrophotrometrically for qualitative and quantitative detection. The limit of detection for the assay was approximately 10² CFU/mL of seb gene harboring target. This method is convenient compared to gel based and ELISA systems. Further, spiking studies and analysis on natural samples emphasized the robustness and applicability of developed method. Altogether, the established assay could be a reliable alternative, low-cost, viable detection tool for the routine investigation of seb from food and clinical sources.

Highly Sensitive Colorimetric Biosensor for Staphylococcal Enterotoxin B by a Label-Free Aptamer and Gold Nanoparticles

A simple, sensitive and selective colorimetric biosensor for the detection of Staphylococcal enterotoxin B (SEB) was developed using SEB-binding aptamer (SEB2) as recognition element and unmodified gold nanoparticles (AuNPs) as colorimetric probes. The assay is based on color change from red to purple due to conformational change of aptamer in the presence of SEB, and the phenomenon of salt-induced AuNPs aggregation which could be monitored by naked eye or UV–vis spectrometer. Results showed that the AuNPs can effectively differentiate the SEB induced conformational change of the aptamer in the presence of a given high salt concentration. A linear response in the range of 50 μg/mL to 0.5 ng/mL of SEB concentration was obtained. The assay was highly specific to SEB as compared to other related toxins. The limit of detection (LOD) of SEB achieved within few minutes was 50 ng/mL visually and spectrometric method improved it to 0.5 ng/mL. Robustness of the assay was tested in artificially spiked milk samples and cross-checked using in house developed sandwich ELISA (IgY as capturing and SEB specific monoclonal as revealing antibody) and PCR. This colorimetric assay could be a suitable alternative over existing methods during biological emergencies due to its simplicity, sensitive and cost effectiveness.

Rapid detection of staphylococcal enterotoxin B in milk samples based on fluorescence hybridization chain reaction amplification

A rapid, simple, and sensitive method has been developed to detect staphylococcal enterotoxin B (SEB). To establish the hybridization chain reaction-based aptasensor, we described the new probes of two hairpins (H1 and H2), which were first designed based on the partial complementary sequence of the SEB aptamer (cDNA). The H1 labeled with a fluorophore and a quencher can act as a molecular fluorescence “switch”. Hence, in the presence of SEB, the aptamer binds SEB, while the unbound cDNA triggers HCR to carry out the cyclic hybridization of H1 and H2 so as to turn “ON” the fluorescence through forming long nicked DNA. By using this new strategy, SEB can be sensitively detected within the range of 3.13 ng mL⁻¹ to 100 ng mL⁻¹ with a detection limit of 0.33 ng mL⁻¹ (S/N = 3). Furthermore, the developed method could facilitate the detection of SEB effectively in milk samples.

A new competitive aptasensor combined with HCR was developed for SEB detection.

Immunoaffinity Chromatography: Concepts and Applications

Antibody-based separation methods, such as immunoaffinity chromatography (IAC), are powerful purification and isolation techniques. Antibodies isolated using these techniques have proven highly efficient in applications ranging from clinical diagnostics to environmental monitoring. Immunoaffinity chromatography is an efficient antibody separation method which exploits the binding efficiency of a ligand to an antibody. Essential to the successful design of any IAC platform is the optimization of critical experimental parameters such as (a) the biological affinity pair, (b) the matrix support, (c) the immobilization coupling chemistry, and (d) the effective elution conditions. These elements and the practicalities of their use are discussed in detail in this review. At the core of all IAC platforms is the high affinity interactions between antibodies and their related ligands; hence, this review entails a brief introduction to the generation of antibodies for use in immunoaffinity chromatography and also provides specific examples of their potential applications.

A Review of the Methods for Detection of Staphylococcus aureus Enterotoxins

Food safety has attracted extensive attention around the world, and food-borne diseases have become one of the major threats to health. Staphylococcus aureus is a major food-borne pathogen worldwide and a frequent contaminant of foodstuffs. Staphylococcal enterotoxins (SEs) produced by some S. aureus strains will lead to staphylococcal food poisoning (SFP) outbreaks. The most common symptoms caused by ingestion of SEs within food are nausea, vomiting, diarrhea and cramps. Children will suffer SFP by ingesting as little as 100 ng of SEs, and only a few micrograms of SEs are enough to cause SPF in vulnerable populations. Therefore, it is a great challenge and of urgent need to detect and identify SEs rapidly and accurately for governmental and non-governmental agencies, including the military, public health departments, and health care facilities. Herein, an overview of SE detection has been provided through a comprehensive literature survey.

Ultrafast immunoassays by coupling dielectrophoretic biomarker enrichment in nanoslit channel with electrochemical detection on graphene

Heterogeneous immunoassays usually require long incubation times to promote specific target binding and several wash steps to eliminate non-specific binding. Hence, signal saturation is rarely achieved at detection limit levels of analyte, leading to significant errors in analyte quantification due to extreme sensitivity of the signals to incubation time and methodology. The poor binding kinetics of immunoassays at detection limit levels can be alleviated through creating an enriched analyte plug in the vicinity of immobilized capture probes to enable signal saturation at higher levels and at earlier times, due to higher analyte association and its faster replenishment at the binding surface. Herein, we achieve this by coupling frequency-selective dielectrophoretic molecular dam enrichment of the target biomarker in physiological media to capture probes immobilized on graphene-modified surfaces in a nanoslit to enable ultrafast immunoassays with near-instantaneous (<2 minutes) signal saturation at dilute biomarker levels (picomolar) within ultra-low sample volumes (picoliters). This methodology is applied to the detection of Prostate Specific Antigen (PSA) diluted in serum samples, followed by validation against a standard two-step immunoassay using three de-identified patient samples. Based on the ability of dielectrophoretic molecular dam analyte enrichment methods to enable the detection of PSA at 1-5 pg mL(-1) levels within a minute, and the relative insensitivity of the signals to incubation time after the first two minutes, we envision its application for improving the sensitivity of immunoassays and their accuracy at detection limit levels.

Universal mobile electrochemical detector designed for use in resource-limited applications

This paper describes an inexpensive, handheld device that couples the most common forms of electrochemical analysis directly to "the cloud" using any mobile phone, for use in resource-limited settings. The device is designed to operate with a wide range of electrode formats, performs on-board mixing of samples by vibration, and transmits data over voice using audio--an approach that guarantees broad compatibility with any available mobile phone (from low-end phones to smartphones) or cellular network (second, third, and fourth generation). The electrochemical methods that we demonstrate enable quantitative, broadly applicable, and inexpensive sensing with flexibility based on a wide variety of important electroanalytical techniques (chronoamperometry, cyclic voltammetry, differential pulse voltammetry, square wave voltammetry, and potentiometry), each with different uses. Four applications demonstrate the analytical performance of the device: these involve the detection of (i) glucose in the blood for personal health, (ii) trace heavy metals (lead, cadmium, and zinc) in water for in-field environmental monitoring, (iii) sodium in urine for clinical analysis, and (iv) a malarial antigen (Plasmodium falciparum histidine-rich protein 2) for clinical research. The combination of these electrochemical capabilities in an affordable, handheld format that is compatible with any mobile phone or network worldwide guarantees that sophisticated diagnostic testing can be performed by users with a broad spectrum of needs, resources, and levels of technical expertise.

Multiwall carbon nanotube-ionic liquid electrode modified with gold nanoparticles as a base for preparation of a novel impedimetric immunosensor for low level detection of human serum albumin in biological fluids

A highly sensitive ionic liquid-multiwall carbon nanotube based impedimetric immunosensor modified with gold nanoparticles (GNPs) was developed for the determination of human serum albumin (HSA). The antigen and antibody models used were HSA and activated anti-HSA, respectively. GNPs were electrodeposited on the multiwall based carbon ionic liquid electrode (MW-CILE) surface and then colloidal GNPs were coated through the thiol groups of 1,6-hexanedithiol (HDT) monolayer as a cross linker. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were employed for characterization of the various layers coated onto the electrode. The electron transfer resistance (Ret) of the antibody-modified electrode changed linearly with the concentration of HSA. The linear range and limit of detection were 0.1-100μgmL(-1) and 15.4ngmL(-1), respectively. The sensitivity and specificity of the immunosensor were validated using human urine and human serum samples. The results showed that the prepared immunosensor is a useful tool for screening trace amounts of HSA in the biological fluids of proteinuria and diabetics patients, in clinical laboratories.

A highly sensitive fluorescence resonance energy transfer aptasensor for staphylococcal enterotoxin B detection based on exonuclease-catalyzed target recycling strategy

An ultrasensitive fluorescence resonance energy transfer (FRET) bioassay was developed to detect staphylococcal enterotoxin B (SEB), a low molecular exotoxin, using an aptamer-affinity method coupled with upconversion nanoparticles (UCNPs)-sensing, and the fluorescence intensity was prominently enhanced using an exonuclease-catalyzed target recycling strategy. To construct this aptasensor, both fluorescence donor probes (complementary DNA1-UCNPs) and fluorescence quencher probes (complementary DNA2-Black Hole Quencher3 (BHQ3)) were hybridized to an SEB aptamer, and double-strand oligonucleotides were fabricated, which quenched the fluorescence of the UCNPs via FRET. The formation of an aptamer-SEB complex in the presence of the SEB analyte resulted in not only the dissociation of aptamer from the double-strand DNA but also both the disruption of the FRET system and the restoration of the UCNPs fluorescence. In addition, the SEB was liberated from the aptamer-SEB complex using exonuclease I, an exonuclease specific to single-stranded DNA, for analyte recycling by selectively digesting a particular DNA (SEB aptamer). Based on this exonuclease-catalyzed target recycling strategy, an amplified fluorescence intensity could be produced using different SEB concentrations. Using optimized experimental conditions produced an ultrasensitive aptasensor for the detection of SEB, with a wide linear range of 0.001-1 ng mL(-1) and a lower detection limit (LOD) of 0.3 pg mL(-1) SEB (at 3σ). The fabricated aptasensor was used to measure SEB in a real milk samples and validated using the ELISA method. Furthermore, a novel aptasensor FRET assay was established for the first time using 30 mol% Mn(2+) ions doped NaYF4:Yb/Er (20/2 mol%) UCNPs as the donor probes, which suggests that UCNPs are superior fluorescence labeling materials for food safety analysis.

Gold Nanoparticles and Nanocomposites in Clinical Diagnostics Using Electrochemical Methods

Progress and development in clinical diagnostics certainly focus upon the advances in the nanomaterials, particularly gold nanoparticles (AuNPs) that offer promise to solve the biocompatible and sensitive detection systems. This paper focuses on the recent application of AuNPs in clinical diagnosis. Various important methods of AuNPs synthesis and their application in clinical detection of various biomolecules using electrochemical detection methods have been described. AuNPs alone and in various composites are also described based on the various biosensors design recently published for the detection of cancer biomarkers, proteins, bacteria, and cancer cells. The effect of AuNPs type and size in clinical detection has also been briefly illustrated.

A novel electrochemical immunosensor based on magnetosomes for detection of staphylococcal enterotoxin B in milk

In this paper, a novel electrochemical immunosensor to detect staphylococcal enterotoxin B based on bio-magnetosomes, polyaniline nano-gold composite and 1,2-dimethyl-3-butylimidazolium hexafluorophosphate ionic liquid, was developed, and found to exhibit high sensitivity and stability. The specific antibody to staphylococcal enterotoxin B conjugated with the magnetosomes showed rapid immunoreactions and good dispersion, which contributed to the formation of a nanostructurally smooth and dense film on the surface of a gold electrode. Polyaniline nano-gold composite and 1,2-dimethyl-3-butylimidazolium hexafluorophosphate ionic liquid were used to modify the electrode as mediators to improve the electron transfer and offer an excellent biocompatible microenvironment for the antibody to retain its activity to enhance the response of the electrochemical sensor. Under optimal conditions, the developed immunosensor showed a good linear response in the range from 0.05 to 5 ng/mL (R(2)=0.9957) with a detection limit as low as 0.017 ng/mL, compared with the one without magnetosomes (0.05-5 ng/mL, 0.033 ng/mL), this developed immunosensor showed a wider response range and a reduced detection limit. And a good specificity with little adsorption to staphylococcal enterotoxin A, C and Na(+), K(+), Ca(2+) was obtained. Moreover, the immunosensor exhibited a good long-time stability at 4 °C reaching up to 60 days, which showed a relatively long working life. Meanwhile the immunosensor could be regenerated four times using NaOH elution. The sensor also displayed a good repeatability with a relative standard deviation of 5.02% for staphylococcal enterotoxin B detection (1 ng/mL, n=9). Furthermore, high recoveries in milk samples from 81% to 118% were achieved and successfully applied to milk sample detection. The obtained results demonstrate that the developed electrochemical immunosensor is a promising tool for the detection of staphylococcal enterotoxin B in food.

Highly sensitive electrochemical detection of proteins using aptamer-coated gold nanoparticles and surface enzyme reactions

A novel electrochemical detection methodology is described for the femtomolar detection of proteins which utilizes both DNA aptamer-functionalized nanoparticles and a surface enzymatic reaction. Immunoglobulin E (IgE) was used as a model protein biomarker, which possesses two distinct epitopes for antibody (anti-IgE) and DNA aptamer binding. A surface sandwich assay format was utilized involving the specific adsorption of IgE onto a gold electrode surface that was pre-modified with a monolayer of aptamer-nanoparticle conjugates followed by the specific interaction of alkaline phosphatase (ALP) conjugated anti-IgE. To clearly demonstrate the signal enhancement associated with nanoparticle use, anodic current measurements of the ALP catalyzed oxidation of the enzyme substrate 4-aminophenylphosphate (APP) were also compared with electrode surfaces upon which the aptamer was directly attached. The detection of an unlabelled protein at concentrations as low as 5 fM is a significant improvement compared to conventional electrochemical-based immunoassay approaches and provides a foundation for the practical use and incorporation of nanoparticle-enhanced detection into electrochemical biosensing technologies.

Immunoaffinity chromatography

Antibody-based separation methods, such as immunoaffinity chromatography (IAC), are powerful purification and isolation techniques. Antibodies isolated using these techniques have proven highly efficient in applications ranging from clinical diagnostics to environmental monitoring. IAC is an efficient antibody separation method which exploits the binding efficiency of a ligand to an antibody. Essential to the successful design of any IAC platform is the optimisation of critical experimental parameters such as: (a) the biological affinity pair, (b) the matrix support, (c) the immobilisation coupling chemistry, and (d) the effective elution conditions. These elements and the practicalities of their use are discussed in detail in this review. At the core of all IAC platforms is the high-affinity interactions between antibodies and their related ligands; hence, this review entails a brief introduction to the generation of antibodies for use in IAC and also provides specific examples of their potential applications.

Effect of diffusion on impedance measurements in a hydrodynamic flow focusing sensor

This paper investigated the effects of diffusion between non-conductive sheath and conductive sample fluids in an impedance-based biosensor. Impedance measurements were made with 2- and 4-electrode configurations. The 4-electrode design offers the advantage of impedance measurements at low frequencies (<1 kHz) without the deleterious effects of double layer impedance which are present in the 2-electrode design. Hydrodynamic flow focusing was achieved with a modified T-junction design with a smaller cross-section for the sample channel than for the focusing channel, which resulted in 2D focusing of the sample stream with just one sheath stream. By choosing a non-conductive sheath fluid and a conductive sample fluid, the electric field was confined to the focused stream. In order to utilize this system for biosensing applications, we characterized it for electrical and flow parameters. In particular, we investigated the effects of varying flow velocities and flow-rate ratios on the focused stream. Increasing flow-rate ratios reduced the cross-sectional area of the focused streams as was verified by finite element modeling and confocal microscopy. Antibody mediated binding of Escherichia coli to the electrode surface caused an increase in solution resistance at low frequencies. The results also showed that the diffusion mass transport at the interface of the two streams limited the benefits of increased flow focusing. Increasing flow velocities could be used to offset the diffusion effect. To optimize detection sensitivity, flow parameters and mass transport must be considered in conjunction, with the goal of reducing diffusion of conducting species out of the focused stream while simultaneously minimizing its cross-sectional area.

Gold screen-printed-based impedimetric immunobiosensors for direct and sensitive Escherichia coli quantisation

Label-free electrochemical impedance immunosensors for the detection and quantification of Escherichia coli (E. coli) using self-assembled monolayers (SAMs)-modified gold screen-printed electrodes (AuSPEs) were developed. Two different immunosensor configurations were tested and compared. In the first one, the immunosensing design was based on the covalent immobilization of anti-E. coli at AuSPEs using the homobifunctional cross-linker 3,3'-dithiobis[sulfosuccinimidylpropionate] (DTSSP). The other one was based on the immobilization of the thiolated antibody onto the electrode surface. In both cases, the evaluation of the developed immunosensors performance was accomplished through the monitoring of the electron-transfer resistance detected by electrochemical impedance spectroscopy (EIS) in the presence of [Fe(CN)(6)(3-)]/[Fe(CN)(6)(4-)] as redox probe. The configuration using the thiolated antibodies gave rise to a better analytical performance, exhibiting a linear relationship between the increment in the electron-transfer resistance (DeltaR(et)) and the logarithmic value of the E. coli concentration in the 5-1.0 x 10(8) cfu mL(-1) range. The limit of detection achieved, with no need for preconcentration or pre-enrichment steps was 3.3 cfu mL(-1). The developed immunosensors showed a high selectivity against Staphylococcus aureus (S. aureus) and Salmonella choleraesuis (S. choleraesuis). The usefulness of the thiolated antibodies-based design for the rapid analysis (1h) of 10 cfu mL(-1)E. coli inoculated river and tap water samples was demonstrated.

Carbon nanotubes with enhanced chemiluminescence immunoassay for CCD-based detection of Staphylococcal enterotoxin B in food

Enhanced chemiluminescence (ECL) detection can significantly enhance the sensitivity of immunoassays but often requires expensive and complex detectors. The need for these detectors limits broader use of ECL in immunoassay applications. To make ECL more practical for immunoassays, we utilize a simple cooled charge-coupled device (CCD) detector combined with carbon nanotubes (CNTs) for primary antibody immobilization to develop a simple and portable point-of-care immunosensor. This combination of ECL, CNT, and CCD detector technologies is used to improve the detection of Staphylococcal enterotoxin B (SEB) in food. Anti-SEB primary antibodies were immobilized onto the CNT surface, and the antibody-nanotube mixture was immobilized onto a polycarbonate surface. SEB was then detected by an ELISA assay on the CNT-polycarbonate surface with an ECL assay. SEB in buffer, soy milk, apple juice, and meat baby food was assayed with a LOD of 0.01 ng/mL using our CCD detector, a level similar to the detection limit obtained with a fluorometric detector when using the CNTs. This level is far more sensitive than the conventional ELISA, which has a LOD of approximately 1 ng/mL. Our simple, versatile, and inexpensive point-of-care immunosensor combined with the CNT-ECL immunoassay method described in this work can also be used to simplify and increase sensitivity for many other types of diagnostics and detection assays.

Toward single molecule detection of staphylococcal enterotoxin B: mobile sandwich immunoassay on gliding microtubules

An immunoassay based on gliding microtubules (MTs) is described for the detection of staphylococcal enterotoxin B. Detection is performed in a sandwich immunoassay format. Gliding microtubules carry the antigen-specific "capture" antibody, and bound analyte is detected using a fluorescent viral scaffold as the tracer. A detailed modification scheme for the MTs postpolymerization is described along with corresponding quantification by fluorescence spectroscopy. The resultant antibody-MTs maintain their morphology and gliding capabilities. We report a limit of detection down to 0.5 ng/mL during active transport in a 30 min assay time and down to 1 ng/mL on static surfaces. This study demonstrates the kinesin/MT-mediated capture, transport, and detection of the biowarfare agent SEB in a microfluidic format.

Ultra-sensitive detection of bacterial toxin with silicon nanowire transistor

Nanowire field effect transistors (nano-FET) were lithographically fabricated using 50 nm doped polysilicon nanowires attached to two small gold terminals separated from each other by a approximately 150 nm gap to serve as the basis for electronic detection of bacteria toxins. The device characterizations, semiconducting properties and use in a robust and sensitive bio-molecular detection sensor of bacterial toxins were reported in this work. The device characteristics were demonstrated with varying gate and drain voltages. The bio-molecular detection was demonstrated using electrochemical impedance spectroscopy (EIS), using Staphylococcus aureus Enterotoxin B (SEB) as the target molecule. The detection limit of SEB was observed in the range of 10-35 fM.

Assembling Amperometric Biosensors for Clinical Diagnostics

Clinical diagnosis and disease prevention routinely require the assessment ofspecies determined by chemical analysis. Biosensor technology offers several benefits overconventional diagnostic analysis. They include simplicity of use, specificity for the targetanalyte, speed to arise to a result, capability for continuous monitoring and multiplexing,together with the potentiality of coupling to low-cost, portable instrumentation. This workfocuses on the basic lines of decisions when designing electron-transfer-based biosensorsfor clinical analysis, with emphasis on the strategies currently used to improve the deviceperformance, the present status of amperometric electrodes for biomedicine, and the trendsand challenges envisaged for the near future.