Construction of photoelectrochemical thrombin aptasensor via assembling multilayer of graphene-CdS nanocomposites

An electrochemical biosensor for the amplification of thrombin activity by perylene-mediated photoinitiated polymerization

BACKGROUND

Thrombin, a coagulation system protease, is a key enzyme involved in the coagulation cascade and has been developed as a marker for coagulation disorders. However, the methods developed in recent years have the disadvantages of complex operation, long reaction time, low specificity and sensitivity. Meanwhile, thrombin is at a lower level in the pre-disease period. Therefore, to accurately diagnose the disease, it is necessary to develop a fast, simple, highly sensitive and specific method using signal amplification technology.

RESULTS

We designed an electrochemical biosensor based on photocatalytic atom transfer radical polymerization (photo-ATRP) signal amplification for the detection of thrombin. Sulfhydryl substrate peptides (without carboxyl groups) are self-assembled to the gold electrode surface via Au-S bond and serve as thrombin recognition probes. The substrate peptide is cleaved in the presence of thrombin to generate -COOH, which can form a carboxylate-Zr(IV)-carboxylate complex via Zr(IV) and initiator (α-bromophenylacetic acid, BPAA). Subsequently, an electrochemical biosensor was prepared by introducing polymer chains with electrochemical signaling molecules (ferrocene, Fc) onto the electrode surface by photocatalytic (perylene, Py) mediated ATRP using ferrocenylmethyl methacrylate (FMMA) as a monomer. The concentration of thrombin was evaluated by the voltammetric signal generated by square wave voltammetry (SWV), and the result showed that the biosensor was linear between 1.0 ng/mL ∼ 10 fg/mL, with a lower detection limit of 4.0 fg/mL (∼0.1 fM). Moreover, it was shown to be highly selective for thrombin activity in complex serum samples and for thrombin inhibition screening.

SIGNIFICANCE

The biosensor is an environmentally friendly and economically efficient strategy while maintaining the advantages of high sensitivity, anti-interference, good stability and simplicity of operation, which has great potential for application in the analysis of complex samples.

Target-Synergized Biologically Mediated RAFT Polymerization for Electrochemical Aptasensing of Femtomolar Thrombin

The assay of thrombin levels is integral to the assessment of coagulation function and clinical screening of coagulation disorder-related diseases. In this work, we illustrate the ingenious use of the target-synergized biologically mediated reversible addition-fragmentation chain transfer (RAFT) polymerization (tsBMRP) as a novel amplification strategy for the electrochemical aptamer-based biosensing of thrombin at the femtomolar levels. Briefly, the tsBMRP-based strategy relies on the boronate affinity-mediated decoration of the glycan chain(s) of the target itself with RAFT agents and the subsequent recruitment of signal labels via BMRP, mediated by the direct reduction of RAFT agents by NADH into initiating/propagating radicals. Obviously, the tsBMRP-based strategy is biologically friendly, low-cost, and simple in operation. As thrombin is a glycoconjugate, its electrochemical aptasensing involves the use of the thrombin-binding aptamer (TBA) as the recognition receptor, the site-specific decoration of RAFT agents to the glycan chain of thrombin via boronate affinity, and further the recruitment of ferrocene signal labels via the BMRP of ferrocenylmethyl methacrylate (FcMMA). As boronate affinity results in the decoration of each glycan chain with tens of RAFT agents while BMRP recruits hundreds of signal labels to each RAFT agent-decorated site, the tsBMRP-based strategy allows us to detect thrombin at a concentration of 35.3 fM. This electrochemical aptasensor is highly selective, and its applicability to thrombin detection in serum samples has been further demonstrated. The merits of high sensitivity and selectivity, low cost, good anti-interference capability, and simple operation make the tsBMRP-based electrochemical thrombin aptasensor great promise in biomedical and clinical applications.

Dual-response electrochemical electrode for sensitive monitoring of topotecan and mitomycin as anticancer drugs in real samples

This research paper employed an innovative electrochemical electrode to simultaneously determine topotecan (TPT) and mitomycin (MMC) as anticancer agents. For this purpose, a novel nanocomposite was synthesized using a hydrothermal procedure. The nanocomposites were characterized using FTIR, STEM, FESEM, mapping analysis, EDX, and XRD methods. The novelty of this work is the successful synthesis of Fe₃O₄ decorated on the surface of CuCo₂S₄ (Fe₃O₄@CuCo₂S₄) nanocomposites showed two separate anodic peaks at 0.8 V for TPT and 1.0 V for MMC with potential separation of 0.2 V. This was enough for the simultaneous electrochemical determination of topotecan and mitomycin on a glassy carbon electrode (GCE), simultaneously. At optimized conditions, the developed electrode exhibited linear responses with TPT and MMC concentration in the ranges of 0.01-0.89 and 0.89-8.95 μM for topotecan and 0.1-19.53 μM for mitomycin. The detection limits were observed as 6.94 nM and 80.00 nM for topotecan and mitomycin, respectively. The fabricated Fe₃O₄@CuCo₂S₄/GCE showed high sensitivity, long-term stability, and repeatability towards the sensing of TPT and MMC simultaneously and can be utilized in real samples. The obtained results confirmed that the fabricated Fe₃O₄@CuCo₂S₄/GCE nanocomposites can be utilize in the simultaneous electrochemical determination of topotecan and mitomycin in real samples.

A visible light inducing photoelectrochemical biosensor with high-performance based on a porphyrin-sensitized carbon nitride composite

An outstanding photosensitive material plays a crucial role in building a high-performance and practical photoelectrochemical (PEC) biosensor.

Proximity hybridization triggered hybridization chain reaction for label-free electrochemical homogeneous aptasensors

A label-free homogeneous electrochemical aptasensor was developed for detection of thrombin based on proximity hybridization triggered hybridization chain reaction induced G-quadruplex formation. Thrombin promoted the formation of a complex via the proximity hybridization of the aptamer DNA strands, which unfolded the molecular beacon, the stem part of molecular beacon as a primer to initiate the hybridization chain reaction process. Thus, with the electrochemical indicator hemin selectively intercalated into the multiple G-quadruplexes, a significant electrochemical signal drop is observed, which is dependent on the concentration of the target thrombin. Thus, using this"signal-off" mode, label-free homogeneous electrochemical strategy for sensitive thrombin assay with a detection limit of 44 fM is realized. Furthermore, this method also exhibits additional advantages of simplicity and low cost, since both expensive labeling and sophisticated probe immobilization processes are avoided. Its high sensitivity, acceptable accuracy, and satisfactory versatility of analytes led to various applications in bioanalysis.

Synthesis of a CdS-decorated Eu-MOF nanocomposite for the construction of a self-powered photoelectrochemical aptasensor

A composite of CdS nanoparticles and a europium metal organic framework (Eu-MOF) (CdS/Eu-MOF) was synthesized. The unique properties of MOFs help to improve the photoelectrochemical (PEC) properties of CdS by reducing charge carrier recombination and utilizing a broader spectrum for light harvesting. Under visible light illumination, the photocurrent of the CdS/Eu-MOF composite modified electrode was about 2.5-fold higher than that of the CdS modified electrode. When an ampicillin (AMP)-binding aptamer was immobilized on the CdS/Eu-MOF modified electrode as a recognition element, a self-powered PEC aptasensor exhibiting a specific photocurrent response to AMP was constructed. Several experimental conditions such as the ratio of CdS to MOF, the coating amount of the CdS/Eu-MOF suspension and the concentration of the aptamer were studied. Under optimum conditions, the photocurrent of the developed sensor was linearly related to the logarithm AMP concentration in the range of 1 × 10-10 to 2 × 10-7 M, with a detection limit (3S/N) of 9.3 × 10-11 M. Moreover, this sensor exhibited excellent selectivity, good repeatability and desirable stability. It was successfully applied to the detection of AMP in lake water and milk samples.

Characterization of quantum dots in cancer cytosol using ICP-MS-based combined techniques

Knowledge of the intracellular behavior of quantum dots (QDs), which encompasses the antiproliferative effect on living cells, is still limited. For this reason, the transformations of CdSeS/ZnS-based QDs in cancer cytosol were examined using capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) hyphenated with inductively coupled plasma MS (ICP-MS). CE-ICP-MS method revealed the dose- and time-dependent speciation changes of QDs in the cytosol, while HPLC-ICP-MS (in the size-exclusion chromatography mode) allowed further characterization of the resulting Cd species. In such an appraisal, the decent CE advantage of high resolution is well complemented by higher sensitivity of HPLC (LOD 4.0 × 10^-10 and 5.4 × 10^-12 mol/L Cd, respectively). Additionally, the influence of serum protein corona on the surface of QDs on their uptake by Hep G2 cancer cells was investigated by direct ICP-MS analysis that revealed that the conjugated proteins greatly reduce the particle internalization.

G-Quadruplex-Forming Aptamers-Characteristics, Applications, and Perspectives

G-quadruplexes constitute a unique class of nucleic acid structures formed by G-rich oligonucleotides of DNA- or RNA-type. Depending on their chemical nature, loops length, and localization in the sequence or structure molecularity, G-quadruplexes are highly polymorphic structures showing various folding topologies. They may be formed in the human genome where they are believed to play a pivotal role in the regulation of multiple biological processes such as replication, transcription, and translation. Thus, natural G-quadruplex structures became prospective targets for disease treatment. The fast development of systematic evolution of ligands by exponential enrichment (SELEX) technologies provided a number of G-rich aptamers revealing the potential of G-quadruplex structures as a promising molecular tool targeted toward various biologically important ligands. Because of their high stability, increased cellular uptake, ease of chemical modification, minor production costs, and convenient storage, G-rich aptamers became interesting therapeutic and diagnostic alternatives to antibodies. In this review, we describe the recent advances in the development of G-quadruplex based aptamers by focusing on the therapeutic and diagnostic potential of this exceptional class of nucleic acid structures.

Electrochemical Polymerization of PEDOT-Graphene Oxide-Heparin Composite Coating for Anti-fouling and Anti-clotting of Cardiovascular Stents

In this study, a novel hemocompatible coating on stainless steel substrates was prepared by electrochemically copolymerizing 3,4-ethylenedioxythiophene (EDOT) with graphene oxide (GO), polystyrene sulfonate (PSS), or heparin (HEP) on SUS316L stainless steel, producing an anti-fouling (anti-protein adsorption and anti-platelet adhesion) surface to avoid the restenosis of blood vessels. The negative charges of GO, PSS, and HEP repel negatively charged proteins and platelets to achieve anti-fouling and anti-clotting. The results show that the anti-fouling capability of the poly(3,4-ethylenedioxythiophene) (PEDOT)/PSS coating is similar to that of the PEDOT/HEP coating. The anti-fouling capability of PEDOT/GO is higher than those of PEDOT/HEP and PEDOT/PSS. The reason for this is that GO exhibits negatively charged functional groups (COO⁻). The highest anti-fouling capability was found with the PEDOT/GO/HEP coating, indicating that electrochemical copolymerization of PEDOT with GO and HEP enhances the anti-fouling capability. Furthermore, the biocompatibility of the PEDOT coatings was tested with 3T3 cells for 1–5 days. The results show that all PEDOT composite coatings exhibited biocompatibility. The blood clotting time (APTT) of PEDOT/GO/HEP was prolonged to 225 s, much longer than the 40 s of pristine SUS316L stainless steel (the control), thus greatly improving the anti-blood-clotting capability of cardiovascular stents.

C60@C3N4 nanocomposites as quencher for signal-off photoelectrochemical aptasensor with Au nanoparticle decorated perylene tetracarboxylic acid as platform

Herein, a novel signal-off photoelectrochemical (PEC) aptasensor was proposed for sensitive detection of thrombin on the basis of C₆₀@C₃N₄ nanocomposites as quencher and Au nanoparticles (depAu) decorated perylene tetracarboxylic acid (PTCA) as sensing platform. Owing to the excellent membrane-forming of PTCA and superior conductivity of depAu, the PTCA between two depAu layers can simply and effectively produce an extremely high initial photocurrent to afford a precondition for sensitive biodetection. Thereafter, the assembly of C₆₀@C₃N₄ nanocomposites on electrode via typical sandwich reaction enabled the generation of a significantly decreased photocurrent. Here, the C₃N₄ with high surface area not only provided massive binding sites for C₆₀ immobilization, but also partly competed with PTCA in light absorption for producing a significantly smaller photocurrent in the presence of electron donor ascorbic acid (AA). Additionally, both the C₃N₄ and C₆₀ have the poor conductivity, which could inhibit the electron transfer to achieve a further decreased photocurrent, effectively improving the sensitivity of proposed biosensor. As a result, the PEC biosensor in a "signal-off" mode showed an extremely low detection limit down to 1.5 fM, providing a sensitive and universal strategy for protein detection.

Graphene-based aptasensors: from molecule-interface interactions to sensor design and biomedical diagnostics

Graphene-based nanomaterials have been widely utilized to fabricate various biosensors for environmental monitoring, food safety, and biomedical diagnostics. The combination of aptamers with graphene for creating biofunctional nanocomposites improved the sensitivity and selectivity of fabricated biosensors due to the unique molecular recognition and biocompatibility of aptamers. In this review, we highlight recent advances in the design, fabrication, and biomedical sensing application of graphene-based aptasensors within the last five years (2013-current). The typical studies on the biomedical fluorescence, colorimetric, electrochemical, electrochemiluminescence, photoelectrochemical, electronic, and force-based sensing of DNA, proteins, enzymes, small molecules, ions, and others are demonstrated and discussed in detail. More attention is paid to a few key points such as the conjugation of aptamers with graphene materials, the fabrication strategies of sensor architectures, and the importance of aptamers on improving the sensing performances. It is expected that this work will provide preliminary and useful guidance for readers to understand the fabrication of graphene-based biosensors and the corresponding sensing mechanisms in one way, and in another way will be helpful to develop novel high performance aptasensors for biological analysis and detection.

A review on visible-light induced photoelectrochemical sensors based on CdS nanoparticles

Discovering the distinctive photophysical properties of semiconductor nanoparticles (NPs) has made these a popular subject in recent advances in nanotechnology-related analytical methods.

Gold Nanoparticles Decorated Hematite Photoelectrode for Sensitive and Selective Photoelectrochemical Aptasensing of Lysozyme

Photoelectrochemical aptasensor (PECAS) is a new and promising detection platform with both high sensitivity and good selectivity. Exploration of new photoelectrode materials and establishment of effective charge transfer channel between photoelectrode and aptamer are the main challenges in this field. In this work, an efficient PECAS based on Au nanoparticles (NPs) decorated Fe₂O₃ nanorod photoelectrode is rationally designed, fabricated, and exhibited excellent sensitivity and selectivity for detection of lysozyme (Lys) with an ultralow detection limit of 3 pM and wide detection range from 10 pM to 100 nM. The Au NPs not only act as anchor to establish an efficient charge transfer channel between the photoelectrode and the aptamer, but also help to enhance the PEC performance through adjusting the carrier density of Fe₂O₃. The rationally designed photoelectrode opens up a distinctive avenue for promoting the PECAS to be a versatile analysis method.

Multiple signal-amplification via Ag and TiO2 decorated 3D nitrogen doped graphene hydrogel for fabricating sensitive label-free photoelectrochemical thrombin aptasensor

In this study, Ag/TiO₂/3D nitrogen doped graphene hydrogel (3DNGH) was prepared for the first time and the photocurrent intensity of this material was greatly enhanced, which was attributed to the multiple enhancements accomplished in one step. The porous structure of 3DNGH could provide an exceptionally large accessible surface area, which was beneficial for the anchoring of Ag and TiO₂ nanoparticles. The introduction of nitrogen doped graphene and metal nanoparticles was capable to facilitate the charge separation efficiency and accelerate the transfer rate of the photogenerated electron-hole pairs. Then the photoelectrochemical performance was further amplified by the localized surface plasmon resonance of Ag nanoparticles. On the basis of excellent PEC properties of Ag/TiO₂/3DNGH, a sensitive label-free PEC sensor has been established for the determination of thrombin successfully. This proposed PEC biosensor exhibited good PEC performances with a wide linear in the range from 0.01p.M. to 10p.M. as well as a relative low detection limit of 3 fM (S/N = 3), indicating that Ag/TiO₂/3DNGH would serve as a promising photoactive material in the applications of PEC biosensors.

A high sensitive visible light-driven photoelectrochemical aptasensor for shrimp allergen tropomyosin detection using graphitic carbon nitride-TiO2 nanocomposite

Herein, for the first time a visible-light-driven photoelectrochemical (PEC) aptasensor for shrimp tropomyosin determination was fabricated by using graphitic carbon nitride (g-C₃N₄) and titanium dioxide (TiO₂) as photoactive nanomaterials, ascorbic acid (AA) as electron donor and ruthenium (III) hexaammine (Ru(NH₃)₆³⁺) as signal enhancer. The surface of an ITO electrode was first modified with g-C₃N₄, TiO₂, and polyethyleneimine (PEI) and then the amine terminal aptamer_TROP probe was attached to PEI by the use of glutaraldehyde (GA) as cross-linker. After that, Ru(NH₃)₆³⁺ was adsorbed on aptamer to enhance the photocurrent signal. The principle of proposed PEC aptasensor is based on the formation of a selective complex between tropomyosin and immobilized aptamer_TROP probe on the surface of ITO/g-C₃N₄-TiO₂/PEI/aptamer_TROP-Ru(NH3)₆⁺³. After the incubation of tropomyosin with TROP aptamer probe, the photocurrent signal decreased due to releasing adsorbed Ru(NH₃)₆³⁺ on aptamer and preventing AA from scavenging photogenerated holes to the photoactive modified electrode. Under the optimized conditions, the fabricated PEC aptasensor was used for the determination of shrimp tropomyosin in the concentration range of 1-400ngmL^-1 with a limit of detection of 0.23ngmL^-1. The proposed PEC aptasensor exhibited high selectivity, sensitivity, and good stability.

When biomolecules meet graphene: from molecular level interactions to material design and applications

Graphene-based materials have attracted increasing attention due to their atomically-thick two-dimensional structures, high conductivity, excellent mechanical properties, and large specific surface areas. The combination of biomolecules with graphene-based materials offers a promising method to fabricate novel graphene-biomolecule hybrid nanomaterials with unique functions in biology, medicine, nanotechnology, and materials science. In this review, we focus on a summarization of the recent studies in functionalizing graphene-based materials using different biomolecules, such as DNA, peptides, proteins, enzymes, carbohydrates, and viruses. The different interactions between graphene and biomolecules at the molecular level are demonstrated and discussed in detail. In addition, the potential applications of the created graphene-biomolecule nanohybrids in drug delivery, cancer treatment, tissue engineering, biosensors, bioimaging, energy materials, and other nanotechnological applications are presented. This review will be helpful to know the modification of graphene with biomolecules, understand the interactions between graphene and biomolecules at the molecular level, and design functional graphene-based nanomaterials with unique properties for various applications.

An ultrasensitive energy-transfer based photoelectrochemical protein biosensor

Using single stranded DNA (ssDNA) as a distance controller and Au nanoparticles (NPs) functionalized with ssDNA as novel energy-transfer nanoprobes, an ultrasensitive energy-transfer based photoelectrochemical protein biosensor was realized.

Electrochemical, Electrochemiluminescence, and Photoelectrochemical Aptamer-Based Nanostructured Sensors for Biomarker Analysis

Aptamer-based sensors have been intensively investigated as potential analytical tools in clinical analysis providing the desired portability, fast response, sensitivity, and specificity, in addition to lower cost and simplicity versus conventional methods. The aim of this review, without pretending to be exhaustive, is to give the readers an overview of recent important achievements about electrochemical, electrochemiluminescence, and photoelectrochemical aptasensors for the protein biomarker determination, mainly cancer related biomarkers, by selected recent publications. Special emphasis is placed on nanostructured-based aptasensors, which show a substantial improvement of the analytical performances.

Graphene-doped Bi2S3 nanorods as visible-light photoelectrochemical aptasensing platform for sulfadimethoxine detection

Bismuth sulphide (Bi2S3) nanorods doped with graphene (G) were synthesized and explored as photoactive materials for constructing a photoelectrochemical (PEC) aptasensor for sulfadimethoxine (SDM) detection. The formation of Bi2S3 nanorods and G nanosheets was observed by scanning electron microscopy (SEM) and further characterized by X-ray diffraction (XRD) spectroscopy. The PEC measurements indicated that the photocurrent response of Bi2S3 was obviously improved by doping suitable amount of G. The G-Bi2S3 composite coated electrode was utilized for fabricating a PEC aptasensor by covalently immobilizing a 5'-amino-terminated SDM aptamer on the electrode surface. Based on the specific interaction between SDM and the aptamer, a PEC sensor responsive to SDM was obtained. Under optimal conditions, the proposed sensor showed a linear photocurrent response to SDM in the concentration range of 1.0-100nM, with a low detection limit (3S/N) of 0.55nM. Moreover, the sensor showed high sensitivity, stability and reproducibility. The potential applicability of the PEC aptasensor was confirmed by detecting SDM in veterinary drug formulation and milk.

Visible light photoelectrochemical aptasensor for adenosine detection based on CdS/PPy/g-C3N4 nanocomposites

In this work, a label-free photoelectrochemical (PEC) aptasensor was developed for adenosine detection based on CdS/PPy/g-C3N4 nanocomposites. The CdS/g-C3N4 heterojunction effectively prevented the photogenerated charges recombination of g-C3N4 and self-photocorrosion processes of CdS, improving photo-to-current conversion efficiency. The introduced polypyrrole (PPy) nanoparticles could lead to a more effective separation of photogenerated charges, thus resulting in a further increasing of photocurrent. The CdS/PPy/g-C3N4 was firstly employed as the photoactive materials for fabrication of aptasensor, and SH-aptamer was then adsorbed on the CdS/PPy/g-C3N4 modified electrodes through S-Cd bond. With increasing of adenosine concentration, the photocurrent decreased as the formation of SH-aptamer-adenosine bioaffinity complexes. Under optimal conditions, the PEC aptasensor had a sensitive response to adenosine in a linear range of 0.3nmolL(-1) to 200nmolL(-1) with a detection limit of 0.1nmolL(-1). Besides, the as-proposed aptasensor has also been applied in human serum samples analysis. The aptasensor exhibits high sensitivity and good stability, thus opening up a new promising PEC platform for some other small molecules analysis.

Sensitive Electrochemical Immunosensor for Detection of Nuclear Matrix Protein-22 based on NH2-SAPO-34 Supported Pd/Co Nanoparticles

A novel sandwich-type electrochemical immunosensor using the new amino group functionalized silicoaluminophosphates molecular sieves (NH₂-SAPO-34) supported Pd/Co nanoparticles (NH₂-SAPO-34-Pd/Co NPs) as labels for the detection of bladder cancer biomarker nuclear matrix protein-22 (NMP-22) was developed in this work. The reduced graphene oxide-NH (rGO-NH) with good conductivity and large surface area was used to immobilize primary antibody (Ab₁). Due to the excellent catalytic activity toward hydrogen peroxide, NH₂-SAPO-34-Pd/Co NPs were used as labels and immobilized secondary antibody (Ab₂) through adsorption capacity of Pd/Co NPs to protein. The immunosensor displayed a wide linear range (0.001–20 ng/mL) and low detection limit (0.33 pg/mL). Good reproducibility and stability have showed satisfying results in the analysis of clinical urine samples. This novel and ultrasensitive immunosensor may have the potential application in the detection of different tumor markers.

Aptamers in analytics

Nucleic acid aptamers are promising alternatives to antibodies in analytics. They are generally obtained through an iterative SELEX protocol that enriches a population of synthetic oligonucleotides to a subset that can recognize the chosen target molecule specifically and avidly. A wide range of targets is recognized by aptamers. Once identified and optimized for performance, aptamers can be reproducibly synthesized and offer other key features, like small size, low cost, sensitivity, specificity, rapid response, stability, and reusability. This makes them excellent options for sensory units in a variety of analytical platforms including those with electrochemical, optical, and mass sensitive transduction detection. Many novel sensing strategies have been developed by rational design to take advantage of the tendency of aptamers to undergo conformational changes upon target/analyte binding and employing the principles of base complementarity that can drive the nucleic acid structure. Despite their many advantages over antibodies, surprisingly few aptamers have yet been integrated into commercially available analytical devices. In this review, we discuss how to select and engineer aptamers for their identified application(s), some of the challenges faced in developing aptamers for analytics and many examples of their reported successful performance as sensors in a variety of analytical platforms.

Nitrogen-doped graphene-chitosan matrix based efficient chemiluminescent immunosensor for detection of chicken interleukin-4

Chicken interleukin-4 (ChIL-4), which is released by activated type 2 helper (Th2) cells following their stimulation in vitro, is an important indicator for the study of cell-mediated immunity in chickens after infection or vaccination. In this work, the first ChIL-4 chemiluminescent (CL) immunosensor was developed via the immobilization of monoclonal ChIL-4 antibodies on a nitrogen-doped graphene (NG)-chitosan nanocomposite matrix. NG nanosheets were used for the first time in the CL immunoassay to provide a biocompatible microenvironment for the immobilized capture antibody. The ChIL-4 immunosensor was characterized systematically. The proposed immunosensor displayed a wide linear range from 0.05 to 70ngmL^-1 and a low detection limit of 0.02ngmL^-1 at a signal-to-noise ratio of 3. Compared to traditional assay methods, this system was more flexible, simple, rapid, and sensitive. Moreover, this CL immunoassay system had an excellent detection and fabrication reproducibility, a high specificity, an acceptable accuracy, and a high stability. This work enables the specific detection of ChIL-4 and the further study of its role in the immune responses of poultry.

A Cathodic "Signal-off" Photoelectrochemical Aptasensor for Ultrasensitive and Selective Detection of Oxytetracycline

A novel cathodic "signal-off" strategy was proposed for photoelectrochemical (PEC) aptasensing of oxytetracycline (OTC). The PEC sensor was constructed by employing a p-type semiconductor BiOI doped with graphene (G) as photoactive species and OTC-binding aptamer as a recognition element. The morphological structure and crystalline phases of obtained BiOI-G nanocomposites were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The UV-visible absorption spectroscopic analysis indicated that doping of BiOI with graphene improved the absorption of materials in the visible light region. Moreover, graphene could facilitate the electron transfer of BiOI modified electrode. As a result, the cathodic photocurrent response of BiOI under visible light irradiation was significantly promoted when a suitable amount of graphene was doped. When amine-functionalized OTC-binding aptamer was immobilized on the BiOI-G modified electrode, a cathodic PEC aptasensor was fabricated, which exhibited a declined photocurrent response to OTC. Under the optimized conditions, the photocurrent response of aptamer/BiOI-G/FTO was linearly proportional to the concentration of OTC ranging from 4.0 to 150 nM, with a detection limit (3S/N) of 0.9 nM. This novel PEC sensing strategy demonstrated an ultrasensitive method for OTC detection with high selectivity and good stability.

A label-free photoelectrochemical aptasensor based on nitrogen-doped graphene quantum dots for chloramphenicol determination

A photoelectrochemical (PEC) sensing platform for chloramphenicol (CAP) detection was constructed using nitrogen-doped graphene quantum dots (N-GQDs) as transducer species and label-free aptamer as biological recognition element. N-GQDs, synthesized via a facile one-step hydrothermal method, were explored to achieve highly efficient photon-to-electricity conversion under visible light irradiation. The obtained N-GQDs were characterized by transmission electron microscopy (TEM), which displayed a narrow size distribution with a mean diameter of 2.14 nm. The X-ray photoelectron spectroscopic (XPS) and Fourier transform infrared spectroscopic (FT-IR) analysis confirmed that nitrogen was successfully doped in GQDs. The UV-visible absorption spectra indicated that nitrogen doping obviously enhanced the absorption of GQDs in visible light region. As a result, the PEC activity of GQDs was promoted by nitrogen doping. Additionally, the π-conjugated structure of N-GQDs provided an excellent platform for aptamer immobilization via π-π stacking interaction. Such an aptamer/N-GQDs based sensor showed a linear PEC response to CAP concentration in the range of 10-250 nM with a detection limit (3 S/N) of 3.1 nM. The developed PEC aptasensor exhibited high sensitivity and selectivity, good reproducibility and high stability.