'Three-To-One' multi-functional nanocomposite-based lateral flow immunoassay for label-free and dual-readout detection of pathogenic bacteria

Multi-model immunochromatographic assay based on "three in one" Fe3O4@PDA@Pt nanocomposite for ultrasensitive detection of zearalenone in cereals

A multifunctional nanocomposite (Fe3O4@PDA@Pt) with good ultraviolet absorption and photothermal conversion ability, as well as peroxidase-like activity is prepared by using coprecipitation method and in situ reduction method. And an immunochromatographic assay with three modes of colorimetric, photothermal and catalytic determination is developed for the sensitive detection of zearalenone (ZEN) in cereals. In the colorimetric test mode, the visual limit of detection (LOD) for assay is 0.1 μg L-1. In the photothermal test mode, the LOD for assay is 0.004 μg L-1, and the detection linear range is 0.009-1.538 μg L-1. In the catalytic test mode, the LOD for assay is 0.013 μg L-1, and the detection linear range is 0.023-3.435 μg L-1. This assay has good specificity and there is no cross-reaction with other mycotoxins. The determination results of ZEN in cereal samples are in good agreement with that results by UPLC-MS/MS, indicating good accuracy of this proposed assay.

Engineered collaborative grown model regulation and LSPR-tunable of Pd@Au core-shell nanoparticles for highly sensitive fluorescence quenching lateral flow immunoassay

Lateral flow immunoassay (LFIA) based on fluorescence quenching is a novel approach to improve the detection sensitivity in recent years. However, inefficient fluorescence quenchers and unclear fluorescence quenching mechanisms have limited the development of fluorescence quenching lateral flow immunoassay (FQ-LFIA). Herein, we synthesized Pd@Au core-shell nanostar (Pd@Au NSs) and Pd@Au core-shell icosahedra nanoparticles (Pd@Au IHNPs) with excellent fluorescence-quenching ability and localized surface plasmon resonance (LSPR) tunable performance by adjusting the injection rate of Au(III) precursors. The absorption peaks of Pd@Au NSs and Pd@Au IHNPs were highly coincident with the emission peaks of the red and green quantum dot nanobeads (QBs), respectively. The fluorescence of green QBs and red QBs was absorbed by the Pd@Au NSs and Pd@Au IHNPs in the inner-filter effect (IFE) approach, which achieved efficient fluorescence quenching (kn(Pd@Au NSs) = 3.41 and kn(Pd@Au IHNPs) = 3.68). Based on Pd@Au NSs and Pd@Au IHNPs as efficient quenchers, the highly sensitive FQ-LFIA was established. The Limits of detection (LODs) of Pd@Au NSs-FQ-LFIA and Pd@Au IHNPs-FQ-LFIA were 0.051 and 0.012 ng mL-1, respectively. Furthermore, the method demonstrated satisfactory recoveries (89.68-117.20 %) for the detection of ABZ in food samples.

Advancements in magnetic nanomaterial-assisted sensitive detection of foodborne bacteria: Dual-recognition strategies, functionalities, and multiplexing applications

Foodborne bacterial diseases are a major cause of human death. Sensitively quantifying those bacteria in foodstuffs is crucial for effective prevention. Yet, the matrix effect from abundant food interferents challenges this goal. Magnetic nanomaterials have been extensively utilized as effective sample pretreatment agents to facilitate the sensitive detection of bacterial pathogens, benefiting from their contribution to mitigating interference in food matrices. The advancement of magnetic scaffold-based biosensors in monitoring foodborne bacteria is reviewed in this work. This review highlights the dual-recognition strategies, which contribute to superior affordability and applicability in bacteria monitoring. The functionalities of magnetic nanoscaffolds in constructing pathogen-targeted biosensors are cataloged into three sections: magnetic separation mediators, signal generation probes, and agents for inactivating bacterial pathogens. Additionally, magnetic nanocomposite-driven multiplexing determination is critically discussed, with different detection approaches are highlighted. Further perspectives regarding superior multifunctional magnetic probes, tunable selection of bioreceptor, portable detection devices, smart identification, and differentiation of bacteria mixtures are introduced.

A dual-mode biosensing platform based on polydopamine-modified FeCoMOF/Co3O4 nanoenzyme for sensitive detection of Escherichia coli O157:H7

The sensitive and specific detection of Escherichia coli O157:H7 (E. coli O157:H7) plays a crucial role for human health in the food field. Here, polydopamine (PDA)-based FeCoMOF/Co3O4 nanoenzymes (FeCoMOF/Co3O4@PDA) were successfully synthesized with three enzyme-like activities of catalase-like, superoxide dismutase-like and peroxidase-like. The PDA layer not only provided an adhesion surface for protein immobilization, but also significantly increased peroxidase-like activity of FeCoMOF/Co3O4@PDA. FeCoMOF/Co3O4@PDA could be directly coupled with antibody as probe for the E. coli O157:H7 detection. Accordingly, the improved Enzyme-Linked Immunosorbent Assay (ELISA) with a dual detection platform of colorimetric-intelligent sensing was developed. Its detection range was as wide as 101-108 CFU mL-1, and the detection limit was as low as 2 CFU mL-1. In addition, FeCoMOF/Co3O4@PDA-ELISA was further used for E. coli O157:H7 detection in actual samples. Thus, this work demonstrated that the proposed FeCoMOF/Co3O4@PDA-ELISA showed excellent potential for analytical testing of E. coli O157:H7.

Multifunctional metal-organic frameworks-mediated colorimetric/photothermal immunosensor for highly sensitivity detection of dibutyl phthalate

Dibutyl phthalate (DBP), a priority pollutant among phthalic acid esters (PAEs) exhibits significant reproductive and respiratory toxicity. In this study, a multifunctional metal-organic frameworks-mediated colorimetric/photothermal immunosensor was established for the quantitative detection of DBP. Firstly, a highly sensitive and specific monoclonal antibody (mAb), designated 3A5, was prepared with a sensitivity IC50 value of 16.29 ng/mL. Secondly, a metal-organic framework material (ZrO₂@C) was synthesized via a two-step pyrolysis process of UiO-66. Subsequently, a multifunctional immunoprobe was prepared for the detection of DBP. Using ZrO₂@C-based colorimetric and photothermal dual-signal immunosensor ensured the accuracy of the detection results, as the multiple of these signals effectively guaranteed the reliability of the results. The limit of detection (LOD) for the dual signal was 0.766 ng/mL (colorimetric signal) and 0.465 ng/mL (photothermal signal). In conclusion, this work presented a novel and feasible approach for the development of multifunctional nanomaterials for the fabrication of immunosensors.

Magnetic graphene-enhanced exonuclease III assisted amplification strategy driven carbon nanozyme for tri-mode detection of Escherichia coli O157:H7

Ultra-precision point-of-care detection of Escherichia coli O157:H7 in foods is an important issue. Here, the detection sensitivity was improved by a signal cascade amplification strategy synergised by exonuclease III assisted isothermal amplification and reverse magnetic strategy. The double-stranded DNA formed by the aptamer and the target DNA as a sensing switch, avoiding the complex process of specific nucleic acid extraction. Further, the signal display element is a green nanozyme synthesized by co-doping Cu and Cl elements with lignin as precursor, which has excellent peroxidase activity and fluorescence properties. The detection limits of fluorescence, colorimetric, and photothermal modes were 6.1, 8.4, and 9.7 cfu/mL, respectively. In order to enhance the precision of cascade signal amplification and the portability of quantitative detection, we built a neural network BP model installed in a smartphone by measuring multi-component data, which provides flexible and selectable application scenarios for the on-site detection of foodborne pathogens.

Nanozyme Cascade Self-Powered H2O2 Strategy for Chemiluminescence Array Sensor to Monitor and Deactivate Multiple Bacteria

Early warning and deactivation of multiple bacteria are highly desirable to prevent pathogen-responsible bacterial infectious illnesses. Here, we developed a nanozyme cascade self-powered H2O2 strategy for a chemiluminescence (CL) array immunosensor to enable high-throughput and simultaneous monitoring of multiple bacteria as well as their deactivation. Specifically, a novel ZIF-67@CoFePBA yolk-shell nanozyme was synthesized through a dissociation and re-coordination mechanism, exhibiting significantly enhanced peroxidase (POD)-like activity due to the confinement and synergistic effects. ZIF-67@CoFePBA nanozyme was utilized to immobilize glucose oxidase (GOx) for constructing the nanozyme cascade self-powered H2O2 system. ZIF-67@CoFePBA nanozyme can catalyze in-situ H2O2 to produce hydroxyl radicals (·OH), resulting in stable glow-type CL to construct array immunosensors without exogenous H2O2. The self-powered CL array sensor was exploited to simultaneously detect numerous bacteria with wide linear ranges of 1.5×10-1.5×107 CFU/mL for Staphylococcus aureus and 1.5×102-1.5×107 CFU/mL for Escherichia coli. Furthermore, the generated ·OH can destroy the internal structure of the bacteria and effectively eliminate them. This study provides a promising insight into the design of self-powered H2O2 sensors for high-throughput and simultaneous detection of multiple bacteria and their subsequent deactivation.

Bacterial surface informatics reliant on multi-mechanism simultaneous detection for Salmonella typhimurium and Staphylococcus aureus

Fully excavating and utilizing the rich information presented on bacterial surfaces can open innovative solutions for the multi-mechanism detection of food-borne pathogens. In this work, a colorimetric-fluorescence dual-signal lateral flow immunoassay was used to establish a simultaneous detection strategy integrating five physical, chemical, and biometric combining mechanisms for Salmonella typhimurium (S. typhimurium) and Staphylococcus aureus (S. aureus). To improve sensitivity, a layer-by-layer design of aggregation-induced emission nanosphere@ polydopamine@ platinum (AIENS@PDA@Pt) nanostructure with excellent colorimetric-fluorescence signal, abundant recognition sites, and rough surface was employed as a signal tag. Under optimal conditions, the colorimetric detection limit of the multi-mechanism reliant simultaneous detection LFIA (multi-MRSD LFIA) for S. typhimurium and S. aureus is 2 × 104 and 5 × 104 cfu·mL-1, respectively, and the fluorescence detection limit is 500 cfu·mL-1 for both target bacteria. This study introduces a novel approach for multi-target, multi-mechanism, and multi-signal output detection of bacteria, providing a significant direction for pathogen research.

Recent advances in metallic and metal oxide nanoparticle-assisted molecular methods for the detection of Escherichia coli

The detection of E. coli is of irreplaceable importance for the maintenance of public health and food safety. In the field of molecular detection, metal and metal oxide nanoparticles have demonstrated significant advantages due to their unique physicochemical properties, and their application in E. coli detection has become a cutting-edge focus of scientific research. This review systematically introduces the innovative applications of these nanoparticles in E. coli detection, including the use of magnetic nanoparticles for efficient enrichment of bacteria and precise purification of nucleic acids, as well as a variety of nanoparticle-assisted immunoassays such as enzyme-linked immunosorbent assays, lateral flow immunoassays, colorimetric methods, and fluorescence strategies. In addition, this paper addresses the application of nanoparticles used in nucleic acid tests, including amplification-free and amplification-based assays. Furthermore, the application of nanoparticles used in electrochemical and optical biosensors in E. coli detection is described, as well as other innovative assays. The advantages and challenges of the aforementioned technologies are subjected to rigorous analysis, and a prospective outlook on the future direction of development is presented. In conclusion, this review not only illustrates the practical utility and extensive potential of metal and metal oxide nanoparticles in E. coli detection, but also serves as a scientific and comprehensive reference for molecular diagnostics in food safety and public health.

Wheat Germ Agglutinin-Modified "Three-in-One" Multifunctional Probe Driven Broad-Spectrum and Flexible Immunochromatographic Diagnosis of viruses With High Sensitivity

The conventional lateral flow assay (LFA) fails to the demands for the accurate screening of viruses as a result of its low sensitivity of colorimetric signal output and poor universality limited by antibody pairs. Here, a magnetically assisted dual-signal output LFA platform is developed for the ultrasensitive, universal, and flexible detection of viruses. A "three-in-one" multifunctional probe (MAuDQD) is prepared using a 180 nm Fe3O4 core to load numerous Au nanoparticles (NPs) and two layers of QDs, which can substantially improve the sensitivity of LFA through coupling with the effects of magnetic enrichment and colorimetric/fluorescent enhancement. Wheat germ agglutinin (WGA)-modified MAuDQD attained the broad-spectrum capture viral membrane proteins and the colorimetric/fluorescent dual-mode detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and monkeypox virus (MPXV) on the LFA strip. In the colorimetric mode, the target viruses detected directly, with the visual sensitivity reaching 0.1-0.5 ng mL-1 and the fluorescent mode supported quantitative analysis of SARS-CoV-2/MPXV with limits of detection decreasing to pg mL-1 level. Practicability of the MAuDQD@WGA-LFA is verified through the detection of 33 real clinical samples, showing the proposed assay has a great potential to become a sensitive, accurate, and universal tool for on-site monitoring of viral infections.

Colored Cellulose Nanoparticles with High Stability and Easily Modified Surface for Accurate and Sensitive Multiplex Lateral Flow Assay

Decentralized testing using multiplex lateral flow assays (mLFAs) to simultaneously detect multiple analytes can significantly enhance detection efficiency, reduce cost and time, and improve analytic accuracy. However, the challenges, including the monochromatic color of probe particles, interference between different test lines, and reduced specificity and sensitivity, severely hinder mLFAs from wide use. In this study, we prepared polydopamine (PDA)-coated dyed cellulose nanoparticles (dCNPs@P) with tunable colors as the probe for mLFAs. Cellulose nanoparticles (CNPs) were synthesized with uniform spheric shapes and tunable sizes. Dye molecules were loaded on CNPs via a mature industrial dyeing method. The PDA shell provided a reactive surface for facile receptor conjugation and protected the dye from leaking. dCNPs@P displayed a higher signal intensity than gold nanoparticles. They also had higher stability to tolerate salt and varied pH. The dCNP@P-based mLFAs were successfully applied to detect multiple mycotoxins in cereals and determine the levels of inflammatory biomarkers to differentiate between viral and bacterial infections. The tests represented high specificity and accuracy and were more sensitive than the tests using gold nanoparticles. The quantified detection was accessible by measuring the intensities of the colorimetric or photothermal signals. Overall, this study provides a practical system solution for mLFAs based on colored dCNPs@P.

Integration of DNA-Decorated Hapten in Emergency Immunoassays for Antibody and Small-Molecule Detection: A Review

DNA-decorated hapten (DDH)-based immunoassays have emerged, demonstrating supreme advantages in sensing applications because of their excellent sensitivity, specificity, and reliability. DDH combines both a recognition element (hapten) and a signal transduction element (DNA portion) with its highly programmable DNA structure enabling the trigger of signal transduction following a recognition event, thereby introducing a novel signal transduction mechanism to immunoassays. In this review, we provide a critical overview of recent research in the DDH-based immunoassays, which are designed to detect specific small molecules and antibodies. On the basis of the following events after binding of antibodies to DDH, the reported studies involved with DDH-based immunoassays can be categorized into three groups: (i) DDH-based immunoassay based on DNA conformational switches induced by antibody binding, (ii) DDH-based immunoassay based on co-localization of nucleic acids induced by antibody binding, and (iii) DDH-based immunoassay based on antibody steric hindrance. We also focus on several fundamental elements of DDH-based immunoassays, including the designed DNA structure, principles of signal transformation, and platform of DDH-based immunoassays. Then, the representative applications of DDH-based immunoassays in areas such as food safety, medical diagnostics, and environmental monitoring as well as the challenges and perspectives of DDH-based immunoassays are also explored.

Full Spectral Overlap to Enhanced Fluorescence Quenching Ability by Using Covalent Organic Frameworks as a Springboard of Quencher for the Turn-on Fluorescence Immunoassay

According to the fluorescence internal filtering effect (IFE), the more the absorption spectrum of the quencher overlaps with the excitation and emission spectra of the fluorescent substance, the better the quenching effect and, correspondingly, the more significant and sensitive the contrast becomes when the fluorescence is turned on. Thus, in the competitive fluorescence-quenching lateral flow immunoassays (FQ-LFIAs), the fluorescence quencher with an outstanding optical property is of great importance. Herein, gold nanoparticles (AuNPs) and polydopamine (PDA) coengineered covalent organic frameworks (COF/Au@PDA) were synthesized as a fluorescence quencher to increase spectral overlap. Thanks to the excellent visible light absorption of COF with donor-acceptor (D-A) structure, the localized surface plasmon resonance (LSPR) capability of AuNPs, and the broad light absorption of the PDA layer, the COF/Au@PDA exhibits intense absorption and a full spectral overlap toward aggregation-induced emission luminous (AIE) dots. Thereafter, COF/Au@PDA, with its immense potential to completely quench the fluorescence of AIE dots through primary IFE and secondary IFE, was applied to a bimodal LFIA platform for verification with a nitrofurazone metabolite as a model analyte. As expected, the detection sensitivity of the COF/Au@PDA-based FQ-LFIA (turn-on) is improved by 6-fold compared with that of the colorimetric (CM)-LFIA (turn-off). Further, ChatGpt was used to improve the assay accuracy and sensitivity, utilizing its high sensitivity to subtle changes in LFIA signals, especially for weak signals that are indeterminate with the naked eye. This work offers a potential approach for building a high-performance fluorescence quencher in the FQ-LFIA and indicates the potential for the application of artificial intelligence in highly sensitive LFIAs.

Unveiling Generally-ignored Co-substrate Effect of Catalase-inherent Peroxidase Mimic for Self-verifiable Detection of High-concentration Hydrogen Peroxide

One nanoparticle possessing both peroxidase (POD) and catalase (CAT) activities is a prevalent co-substrate nanozyme system, distinct from the extensively researched cascade nanozyme system. During the sensing of hydrogen peroxide by POD, the impact of CAT is actually ignored in most studies. In this study, the CAT effect on hydrogen peroxide detection is thoroughly investigated based on POD catalysis by finely tuning the relative activity of POD and CAT. It is discovered that the CAT effect can be changed by delaying the injection of chromogenic substrate after adding hydrogen peroxide and that the linear range grows with the delayed time. Then, a theoretical mechanism showed that the time-delay mediated CAT effect magnification does not change the Vmax, but it causes Km to linearly increase with delayed time, consistent with the experiment results. Furthermore, the detection of high concentrations of hydrogen peroxide is successfully realized in contact lens care solutions by utilizing time-delay-mediated POD/CAT nanozyme. On the other hand, its linear range-tunable characteristic is used to produce multiple standard curves, then enabled self-verifying hydrogen peroxide detection. Overall, this work investigates the role of CAT in CAT-inherent POD nanozymes both theoretically and experimentally, and confirms POD/CAT nanozyme's priority in developing high-performance sensors.

Development of a β-lactamase-based aggregation-induced emission lateral flow strip for the detection of clavulanic acid in Milk

Lack of biorecognition elements significantly hinders the development of rapid detection methods for clavulanic acid (CA). To address this, we expressed Class A β-lactamases PC1 in vitro and demonstrated its high affinity for CA. Then we investigated the recognition mechanisms of PC1 for CA and identified key contact amino acids: Ser70, Lys73, Ser130, Glu166, and Lys234. Furthermore, PC1 was utilized as a novel biorecognition element to establish a "pseudo-immuno" lateral flow strip (LFS) for CA detection. Aggregation-induced emission fluorescence microspheres (AIE@FM) and biotin-streptavidin (Bio-SA) were integrated to improve the detection performance of PC1-based LFS. Results showed that the sensitivity (cut-off value) of PC1-based AIE(Bio-SA)-LFS was enhanced 2-fold and 4-fold compared to basic AIE@FM-LFS and traditional Au-based LFS, respectively. Eventually, the proposed PC1-based AIE(Bio-SA)-LFS was successfully verified in milk samples with a cut-off value of 20 ng mL-1. This study provides a powerful tool for on-site CA monitoring for the first time.

Multifunctional magnetic tags with photocatalytic and enzyme-mimicking properties for constructing a sensitive dual-readout ELISA

ELISA has become the gold standard for detecting harmful substances due to its specific antibody recognition and sensitive enzyme-catalyzed reactions. In this study, multifunctional magnetic Prussian blue nanolabels (MPBNs) were synthesized using a simple gentle two-step method to achieve a dual-readout mode. The MPBNs provide a sensitive colorimetric signal by efficiently catalyzing the oxidation of TMB and exhibit prominent photocatalytic degradation activity towards Rhodamine B (RhB). Supplemented by the quenching effect of oxTMB, the fluorescence was enabled to serve as a sensitive second signal. The magnetic property of the labels facilitates the separation and enrichment of the target, thereby improving sensitivity. Utilizing the versatile MPBNs, the visual limit of detection (vLOD) for Staphylococcus aureus is as low as 100 CFU/mL, with a quantitative analysis range of 102-108 CFU/mL. The introduction of photocatalytic reactions into immunoassay has opened up a new signal response system with strong momentum for development and application.

Coral-like AgNPs hybrided MOFs modulated with biopolymer polydopamine for synergistic antibacterial and biofilm eradication

Bacterial contamination is an intractable challenge in food safety, environments and biomedicine fields, and places a heavy burden on society. Polydopamine (PDA), a high molecular biopolymer, is considered as a promising candidate to participate in the design of novel antibacterial agents with unique contributions in biocompatibility, adherence, photothermal and metal coordination ability. In this study, coral-like ZIFL-PDA@AgNPs with excellent antibacterial properties and biocompatibility were prepared by embedding AgNPs into the biopolymer PDA-modulated ZIFL-PDA nanostructures by green reduction method to solve the problem with poor stability of AgNPs. Based on the plasma resonance effect of AgNPs, coral-like ZIFL-PDA@AgNPs had enhanced photothermal properties compared with ZIFL-PDA. Due to the synergistic effect between antibacterial metal ions mainly Ag+ and the photothermal effect, coral-like ZIFL-PDA@AgNPs showed enhanced anti-mature biofilm and antibacterial properties, which was dependent on its concentration and sterilization time. In addition, regulated by the ZIFL-PDA nanostructure, coral-like ZIFL-PDA@AgNPs demonstrated a unique Ag+ long-time sustained release behavior, giving it an extended antibacterial validity period and good biocompatibility. Antibacterial mechanism experiments indicated that coral-like ZIFL-PDA@AgNPs can significantly damage the integrity of bacterial cell membrane, reduce the content of ATP in bacterial by affecting the activity of succinate dehydrogenase, and induce the accumulation of reactive oxygen species, ultimately leading to bacterial death.

Ultrasensitive Analysis of Escherichia coli O157:H7 Based on Immunomagnetic Separation and Labeled Surface-Enhanced Raman Scattering with Minimized False Positive Identifications

It is a big challenge to monitor pathogens in food with high selectivity. In this study, we reported an ultrasensitive method for Escherichia coli O157:H7 detection based on immunomagnetic separation and labeled surface-enhanced Raman scattering (SERS). The bacterium was identified by heterogeneous recognition elements, monoclonal antibody (mAb), and aptamer. E. coli O157:H7 was separated and enriched by magnetic nanoparticles modified by mAb, and then a plasmonic nanostructure functionalized by aptamers with embedded Raman tags and interior gaps was utilized for further discrimination and detection. The selectivity was enhanced by two binding sites. The higher Raman enhancement was obtained by strong local electromagnetic field oscillation in the gap and the firm embedment of 4-mercaptopyridine (4-Mpy). Optimum experiments created that SERS signals of 4-Mpy at 1010 cm-1 had a good linearity with E. coli O157:H7 at a large range of 10 to 107 CFU/mL with a limit of detection of 2 CFU/mL. This method has great potential for on-site food pathogenic bacterial detection.

Multifunctional nanoenzyme lateral flow immunoassay strip for rapid and ultrasensitive detection of carbofuran in vegetables

A lateral flow immunoassay strip (LFIAS) is one of the most frequently rapid test technologies for carbofuran (CAR). Nevertheless, the LFIAS has a poor quantitative capability and low sensitivity. And, it also requires often complex sample handling steps, making testing time longer. In this study, Fe3O4 nanoparticles were successively modified with MIL-100(Fe)-based metal-organic framework (MOF) and chloroplatinic acid hexahydrate to obtain a core-shell complex of Fe3O4-MOF-Pt. The complex had a peroxidase-mimicking activity catalytic function that enabled signal amplification and sensitivity enhancement. Upon coupling with carbofuran monoclonal antibody (CAR-mAb), the magnetic separation properties of the probe enabled target-specific enrichment. The LFIAS based on Fe3O4-MOF-Pt nanocomposites could detect CAR in the range of 0.25-50 ng mL-1 with a limit of detection (LOD) of 0.15 ng mL-1, enabling colorimetric and catalytic analysis. In addition, the method showed high specificity and stability for detecting CAR in various vegetables, and recovery rates of the spiked samples were 91.40%-102.40%. In conclusion, this study provided one-stop detection of "target enrichment-visual inspection". While lowering the LOD, it reduced the detection time and improved the detection efficiency. The multifunctional Fe3O4-MOF-Pt nanocomposite provides an idea for the construction of novel multifunctional probes to improve the detection performance of conventional LFIAS.

Halochromic Bacterial Cellulose/Anthocyanins Hybrid Polymer Film with Wound-Healing Potential

Polymer-based dressings deriving from natural biomaterials have advantages such as nontoxicity, biocompatibility, and mechanical stability, which are essential for efficient wound healing and microbial infection diagnostics. Here, we designed a prototype of an intelligent hydrogel dressing on the base of bacterial cellulose (BC) for monitoring wound microbial infection due to the uploaded natural pH dye-sensor, anthocyanins (ANC) of elderberry fruit (Sambucus nigra L.). The highest sensor responses to bacterial metabolites for ANC immobilized to BC were observed at pH 5.0 and 6.0. The detection limit of the sensor signals was 3.45 A.U., as it was evaluated with a smartphone-installed application. The FTIR spectral analysis of the hybrid BC/ANC hydrogel films has proved the presence of anthocyanins within the BC matrix. Hybrid films differed from the control ones by thicker microfibrils and larger pores, as detected with scanning electron microscopy. Halochromic BC/ANC films exhibited antimicrobial activities mainly against gram-positive bacteria and yeast. They showed no cytotoxicity for the in vitro human cell lines and mouse fibroblasts within a selected range of anthocyanin concentrations released from the BC/ANC film/dressing prototype. Compared to the control, the in vitro healing test showed overgrowth of primary mouse fibroblasts after applying 0.024-2.4 µg/mL ANC.

"Three-in-One": Ultrasensitive Lateral Flow Immunoassay Driven by Magnetic Enrichment and Photothermal Signal Amplification

Conventional lateral flow immunoassay (LFIA) usually suffers from poor antimatrix interference, unsatisfactory sensitivity, and lack of quantitative ability for target analyte detection in food matrices. In response to these limits, here, multifunctional nanomaterial ZnFe2O4 nanoparticles (ZFOs) were developed and integrated into LFIA for powerful magnetic separation/enrichment and colorimetric/photothermal target sensing. Under optimum conditions, the detection for clenbuterol (CL) with magnetic enrichment achieves 9-fold higher sensitivity compared to that without enrichment and 162-fold higher sensitivity compared to that based on traditional colloidal golds. Attributing the improved performances of ZFOs, CL can be detected at ultralow levels in pork and milk with 10 min of immunoreaction time. The vLODs were 0.01 μg kg-1 for two modes, and the cutoff values of CL were about 5 and 3 μg kg-1, respectively. More importantly, the enrichment ZFO-mediated LFIA (ZE-LFIA) exhibits a similar limit of detection (LOD) in both buffer solution and food matrix, demonstrating a universal resistance to the food matrix. The multitudinous performance merits of this ZE-LFIA with high sensitivity, matrix tolerance, accuracy, and specificity have ensured a broad application potential for target detection of clenbuterol and can serve as an experience for other veterinary drug residues' detection.

A nanoparticle-assisted signal-enhancement technique for lateral flow immunoassays

Lateral flow immunoassay (LFIA), an affordable and rapid paper-based detection technology, is employed extensively in clinical diagnosis, environmental monitoring, and food safety analysis. The COVID-19 pandemic underscored the validity and adoption of LFIA in performing large-scale clinical and public health testing. The unprecedented demand for prompt diagnostic responses and advances in nanotechnology have fueled the rise of next-generation LFIA technologies. The utilization of nanoparticles to amplify signals represents an innovative approach aimed at augmenting LFIA sensitivity. This review probes the nanoparticle-assisted amplification strategies in LFIA applications to secure low detection limits and expedited response rates. Emphasis is placed on comprehending the correlation between the physicochemical properties of nanoparticles and LFIA performance. Lastly, we shed light on the challenges and opportunities in this prolific field.

Review of Detection Limits for Various Techniques for Bacterial Detection in Food Samples

Foodborne illnesses can be infectious and dangerous, and most of them are caused by bacteria. Some common food-related bacteria species exist widely in nature and pose a serious threat to both humans and animals; they can cause poisoning, diseases, disabilities and even death. Rapid, reliable and cost-effective methods for bacterial detection are of paramount importance in food safety and environmental monitoring. Polymerase chain reaction (PCR), lateral flow immunochromatographic assay (LFIA) and electrochemical methods have been widely used in food safety and environmental monitoring. In this paper, the recent developments (2013-2023) covering PCR, LFIA and electrochemical methods for various bacterial species (Salmonella, Listeria, Campylobacter, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli)), considering different food sample types, analytical performances and the reported limit of detection (LOD), are discussed. It was found that the bacteria species and food sample type contributed significantly to the analytical performance and LOD. Detection via LFIA has a higher average LOD (24 CFU/mL) than detection via electrochemical methods (12 CFU/mL) and PCR (6 CFU/mL). Salmonella and E. coli in the Pseudomonadota domain usually have low LODs. LODs are usually lower for detection in fish and eggs. Gold and iron nanoparticles were the most studied in the reported articles for LFIA, and average LODs were 26 CFU/mL and 12 CFU/mL, respectively. The electrochemical method revealed that the average LOD was highest for cyclic voltammetry (CV) at 18 CFU/mL, followed by electrochemical impedance spectroscopy (EIS) at 12 CFU/mL and differential pulse voltammetry (DPV) at 8 CFU/mL. LOD usually decreases when the sample number increases until it remains unchanged. Exponential relations (R2 > 0.95) between LODs of Listeria in milk via LFIA and via the electrochemical method with sample numbers have been obtained. Finally, the review discusses challenges and future perspectives (including the role of nanomaterials/advanced materials) to improve analytical performance for bacterial detection.

Rapid and ultra-sensitive lateral flow assay for pathogens based on multivalent aptamer and magnetic nanozyme

Ultra-sensitive LFA methods for pathogen detection commonly depended on tedious and time-consuming nucleic acid amplification. Here, a high affinity multivalent aptamer (multi-Apt) for S. aureus was obtained through exquisite engineering design. The scaffold and conformation of the multi-Apt were found to be key factors in the detection signal of aptsensors. After optimization, the binding affinity of the multi-Apt to S. aureus was improved by more than 8-fold from 135.9 nM to 16.77 nM. By the joint use of the multi-Apt and a multifunctional nanozyme Fe3O4@MOF@PtPd, a fast and ultra-sensitive LFA for S. aureus was developed (termed MA-MN LFA). In this method, a Fe3O4@MOF@PtPd nanozyme was modified with vancomycin and could efficiently capture and separate S. aureus. Moreover, the multi-Apt worked together with the nanozyme to bind with S. aureus to form a ternary complex at the same time, which simply the fabrication of LFA strip. The developed MA-MN LFA could detect S. aureus as low as 2 CFU/mL within 30 min and a wide linear range of 10-1 × 108 CFU/mL was obtained. The detection is easily operated, fast (can be completed within 30 min) and versatile for Gram-positive pathogens, thus has great potential as a powerful tool in pathogen detection.

Preparation of a capsaicinoids broad spectrum antibody and its application in non-enzyme immunoassay based on DMSNs@PDA@Pt

Capsaicinoids (CPCs) is a special ingredient with pungent smell in condiments, which can also be used as an exogenetic marker for kitchen waste oil. Development of immunoassay for CPCs remains a challenging due to relatively difficult preparation of the broad-spectrum antibody (Ab). In this work, a broad-spectrum polyclonal antibody (pAb) which can simultaneously recognize capsaicin (CPC), dihydrocapsaicin (DCPC), nordihydrocapsaicin (NDCPC), and N-vanillylnonanamide (N-V) is produced, and a non-enzyme immunoassay (NISA) based on this Ab, dendritic mesoporous silica nanomaterials (DMSNs), polydopamine (PDA), and high catalytic efficiency of Pt nanoparticles to prepare signal probe (DMSNs@PDA@Pt) is established. Here, the limit of detection (LOD) of NISA for CPC is as low as 0.04 μg L-1. It is worth mentioning that the LOD of the proposed NISA is at least 23 times lower than that of traditional enzyme-linked immunosorbent assay (ELISA) based on horseradish peroxidase (HRP). Moreover, the proposed NISA is applied to detect CPCs in edible oil samples, the result has good consistency with that of ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The proposed NISA based on DMSN@PDA@Pt and broad-spectrum Ab is an ideal tool for highly effective screening CPCs for kitchen waste oil abuse surveillance.

Applying a sandwich-like strategy for dual 'light up' capture and eradication of Staphylococcus aureus using magnetically functionalized materials

In this study, we proposed an innovative application of porcine immunoglobulin G (IgG)-functionalized Fe3O4 (IgG-Fe3O4) specifically designed to target and capture Staphylococcus aureus (S. aureus). In addition, aminophenylboronic acid-modified tetraphenylethylene nanoparticles (APBA-TPE NPs) were utilized, establishing a sandwich-type dual recognition system via interactions with the bacteria's extracellular glycolipids. This approach enables highly sensitive and precise detection of bacterial presence, with a limit of detection (LOD) reaching down to 5.0 CFU/mL. Specifically, the prepared APBA-TPE NPs achieved 99.99% bacterial inactivation within 60 min at a concentration of 200 µg/mL. The results showed that APBA-TPE NPs possess a remarkable capacity for reactive oxygen species (ROS) production, which could attack the bacterial cell membrane, leading to bacterial lysis and content leakage, and ultimately to bacterial death. Furthermore, the material still showed good recoveries ranging from 88.5% to 93.5% in actual water samples, as well as a favorable sterilizing effect of killing all microorganisms for 60 min. This research provides new strategies and insights into the construction of methods for the specific capture, detection, and inactivation of S. aureus.

A versatile CuCo@PDA nanozyme-based aptamer-mediated lateral flow assay for highly sensitive, on-site and dual-readout detection of Aflatoxin B1

Mycotoxin contaminations in food and environment seriously harms human health. Constructing sensitive and point-of-test early-warning tools for mycotoxin determination is in high demand. In this study, a CuCo@PDA nanozyme-based aptamer-mediated lateral flow assay (Apt-LFA) has been elaborately designed for on-site and sensitive determination of mycotoxin Aflatoxin B1 (AFB1). Benefiting from the rich functional groups and excellent peroxidase-like activity, the CuCo@PDA with original dark color can be conjugated with the specific recognition probe (i.e., aptamer), generating colorimetric signal on the test lines of Apt-LFA via a competitive sensing strategy. The signal can further be amplified in-situ by catalytic chromogenic reaction. Therefore, a visual and dual-readout detection of AFB1 has been realized. The developed Apt-LFA provides a flexible detection mode for qualitative and quantitative analysis of AFB1 by naked-eyes observation or smartphone readout. The smartphone-based LFA platform shows a reliable and ultrasensitive determination of AFB1 with the limit of detection (LOD) of 2.2 pg/mL. The recoveries in the real samples are in the range of 95.11-113.77% with coefficients of variations less than 9.84%. This study provides a new approach to realize point-of-test and sensitive detection of mycotoxins in food and environment using nanozyme-based Apt-LFAs.

Advances in electrochemical-optical dual-mode biosensors for detection of environmental pathogens

Electrochemical techniques are commonly used to analyze and screen various environmental pathogens. When used in conjunction with other optical recognition methods, it can extend the sensing range, lower the detection limit, and offer mutual validation. Nowadays, electrochemical-optical dual-mode biosensors have ensured the accuracy of test results by integrating two signals into one, indicating their potential use in primary food safety quantitative assays and screening tests. Particularly, visible optical signals from electrochemical/colorimetric dual-mode biosensors could meet the demand for real-time screening of microbial pathogens. While electrochemical-optical dual-mode probes have been receiving increasing attention, there is limited emphasis on the design approaches for sensors intended for microbial pathogens. Here, we review the recent progress in the merging of optical and electrochemical techniques, including fluorescence, colorimetry, surface plasmon resonance (SPR), and surface enhanced Raman spectroscopy (SERS). This study particularly emphasizes the reporting of various sensing performances, including sensing principles, types, cutting-edge design approaches, and applications. Finally, some concerns and upcoming advancements in dual-mode probes are briefly outlined.

Dual-Readout Ultrasensitive Lateral Flow Immunosensing of Salmonella typhimurium in Dairy Products by Doping Engineering-Powered Nanoheterostructure with Enhanced Photothermal Performance

The photothermal lateral flow immunoassay (LFIA) is of great significance to suitable for on-site semiquantitative detection, which has the upper hand in further constructing detection methods for low-concentration targets. Herein, we presented a doping engineering-powered nanoheterostructure with an enhanced photothermal performance strategy, employing bimetallic nanocuboid Pt3Sn (PSNCs) as a proof of concept. With the help of finite element simulation analysis, the contrast of direct temperature experiment, and the evaluation of photothermal conversion efficiency (η), the distinguished and enthusiastic photothermal feedback of PSNCs is proved. Based on steady bright black of colorimetric and superior photothermal performance, the PSNCs were employed to construct an ultrasensitive model LIFA for detecting Salmonella typhimurium (S. typhimurium), which achieved the double-signal semiquantitative detection, the detection limit reached 103 cfu mL-1 (colorimetric mode) and 102 cfu mL-1 (photothermal mode), which is 100 times higher than that of the traditional colloidal gold method. In addition, the method was effective for the detection of targets in dairy samples only through a simple dilution treatment, which was completed within 15 min. Meanwhile, this PSNCs dual-signal LFIA demonstrated the sensitive detection of S. typhimurium due to the excellent colorimetric signal and significant photothermal performance, which provides a broad spectrum for the future detection of foodborne pathogens.

Trifunctional Nanocomposites with Colorimetric Magnetic Catalytic Activities Labels in Sandwich Immunochromatographic Detection of Escherichia coli O157:H7

The emergence of nanoenzymes has catalyzed the robust advancement of the lateral flow immunoassay (LFIA) in recent years. Among them, multifunctional nanocomposite enzymes with core-shell architectures are considered preferable for promoting the sensing ability due to their good biocompatibility, precise control over size, and surface properties etc. Herein, we developed a dual-channel ensured lateral flow immunoassay (DFLIA) platform utilizing a magnetic, colorimetric, and catalytic multifunctional nanocomposite enzyme (Fe3O4@TCPP@Pd) [TCPP, Tetrakis (4-carboxyphenyl) porphyrin] for the ultrasensitive and highly accurate rapid detection of Escherichia coli O157:H7 (E. coli O157:H7). Fe3O4@TCPP@Pd-mAb exhibits superior performance compared to traditional AuNPs, including enhanced sensitivity and an extended linear detection range, benefiting from its high brightness signal, strong magnetic separation ability, and high peroxidase activity (Vmax = 2.32 μM S1-). Moreover, the Fe3O4@TCPP@Pd-labeled mAb probe exhibited exceptional stability and high affinity toward E. coli O157:H7 (with an affinity constant of approximately 1.723 × 109 M-1), indicating its potential for the efficient capture of the pathogen. Impressively, the developed Fe3O4@TCPP@Pd-DFLIA achieved ultrasensitive detection for E. coli O157:H7 with pre- and postcatalytic naked-eye detection sensitivities of 255 cfu/mL and 77 cfu/mL, respectively, representing an approximately 41-fold improvement over the conventional AuNP-based LFIA and also possessed good specificity and reproducibility [relative standard deviation (RSD) < 10%]. Additionally, the established DFLIA exhibited satisfactory recoveries in detecting pork and milk samples, further validating the reliability of this platform for immunoassays and demonstrating its potential for utilization in bioassays and clinical diagnostics.

Highly bright and stable CsPbBr3 perovskite nanocrystals with amphiphilic polymer binding based dual-readout lateral flow immunoassay for detection of carcinoembryonic antigen

Rapid and highly sensitive detection of tumor marker (TM) is critical for the early diagnosis and treatment of cancers. Herein, utilizing highly bright and water-stable CsPbBr3 perovskite nanocrystals (NCs) capped with amphiphilic polymer ligand of octylamine-modified polyacrylic acid (OPA) and gold nanoparticles (AuNPs) as reporters, a lateral flow immunoassay (LFIA) strip is developed for fluorescence and colorimetric dual-mode detection of carcinoembryonic antigen (CEA). The prepared CsPbBr3 NCs capped by an amphiphilic polymeric of OPA ligand showed high stability and bright fluorescence. Moreover, the AuNPs immunoprobes were captured with CEA antigen and quench the green fluorescence of CsPbBr3/OPA NCs on the T line due to the inner filter effect (IFE). Therefore, CEA could be quantitative analyzed by the dual-readout of fluorescence and colorimetric signal. The detection limits of CEA can reach as low as 0.023 ng/mL and 0.027 ng/mL for the fluorescence and colorimetric mode, respectively. Good specificity and reproducibility were also demonstrated for this method. Finally, the CsPbBr3/OPA NCs-based LFIA showed good accuracy in detection of CEA level from clinical serum samples. This work firstly enables the application of CsPbBr3 perovskite NCs in a LFIA, displaying great potential in point-of-care clinical diagnosis.

Nanozyme as detector and remediator to environmental pollutants: between current situation and future prospective

The term "nanozyme" refers to a nanomaterial possessing enzymatic capabilities, and in recent years, the field of nanozymes has experienced rapid advancement. Nanozymes offer distinct advantages over natural enzymes, including ease of production, cost-effectiveness, prolonged storage capabilities, and exceptional environmental stability. In this review, we provide a concise overview of various common applications of nanozymes, encompassing the detection and removal of pollutants such as pathogens, toxic ions, pesticides, phenols, organic contaminants, air pollution, and antibiotic residues. Furthermore, our focus is directed towards the potential challenges and future developments within the realm of nanozymes. The burgeoning applications of nanozymes in bioscience and technology have kindled significant interest in research in this domain, and it is anticipated that nanozymes will soon become a topic of explosive discussion.

Dual-signal and one-step monitoring of Staphylococcus aureus in milk using hybridization chain reaction based fluorescent sensor

Food-borne pathogens in dairy products that was contaminated from raw ingredients or improper food handling can cause a major threaten to human health. Here, to construct the pathogens detection, a dual-signal readout fluorescent switching sensor was designed for one-step determination of Staphylococcus aureus (S. aureus), which was a marker of food contamination. Graphene oxide (GO) was used as a fluorescence quencher, while fluorophore-labeled hairpin DNA was used as a donor, resulting in fluorescence resonance energy transfer (FRET) from the fluorophore to GO (signal off). Enzyme-free hybridization chain reaction could generate remarkable signal amplification, which avoided the nonspecific desorption caused by any enzymatic proteins in GO surface. With the strong binding ability of aptamer to S. aureus, a long bifluorescent molecules-labeled double-stranded DNA product was formed, bringing in dual-signal readout responses (signal on). Consequently, a reliable, sensitive and selective sensor was obtained for one-step quantification of S. aureus concentration from 10 to 108 CFU/mL with a detection limit of 1 CFU/mL. Furthermore, satisfactory stability, reproducibility, specificity and good recovery efficiency in milk samples revealed that the proposed sensor could be served as a prospective tool for food safety analysis.

Dual-Function Janus Nanozymes for Performance Evaluation and Application in a Surrogate Virus Neutralization Test with Vaccinated Samples

The need exists for biosensing technologies capable of sensitively and accurately detecting various biomarkers. In response, the development of nanozymes is actively underway; they have advantages in stability, cost, performance, and functionalization over natural enzymes commonly used for signal amplification in sensing technologies. However, the performance of nanozymes is interdependent with factors such as shape, size, and surface functional moiety, making it challenging to perform quantitative performance comparisons based on the nanozyme material. In this study, we propose a physical synthetic approach to fabricate double-layered bimetallic nanozymes with identical shapes, sizes, and surfaces but different material compositions. These Janus nanozymes consist of a nanozymatic layer responsible for catalytic activity and a gold layer responsible for quantification and efficient surface modification. Based on their identical physicochemical properties, the synthesized double-layered bimetallic nanozymes allow, for the first time, a quantitative comparison of nanozymatic activities in terms of various kinetic parameters. We compared several candidates and found that the Ir-Au nanozyme exhibited the best performance. Subsequently, we applied this nanozyme to detect neutralizing antibodies against SARS-CoV-2 based on a surrogate virus neutralization test. The results demonstrated a limit of detection as low as 2 pg/mL and selectivity specifically toward MERS-CoV. The performance of this assay was further validated using vaccinated samples, demonstrating the potential of our approach as a cost-effective, rapid, and sensitive diagnostic tool for neutralizing antibody detection against viruses such as SARS-CoV-2.

High extinction coefficient material combined with multi-line lateral flow immunoassay strip for ultrasensitive detection of bacteria

Lateral flow immunoassay strips (LFIAs) are a reliable and point-of-care detection method for rapid monitoring of bacteria, but their sensitivity was limited by the low extinction coefficient of colloidal gold nanoparticles (Au NPs) and low capture efficiency of test-line. In this study, polydopamine nanoparticles (PDA NPs) were employed to replace Au NPs, due to their high extinction coefficient. And the amount of test-line was increased to 5 for further improving the efficiency of bacteria capture. Thus, under visual observation, the detection limits of PDA-based LFIAs (102 CFU/mL) were about 2 orders of magnitude lower than Au-based LFIAs (104 CFU/mL). Furthermore, the invisible signal could be collected by Image J and the detection limit can reach 10 CFU/mL. The proposed test strips were successfully applied for the quantitative, accurate, and rapid screening of E. coli in food samples. This study provided a universal approach to enhance the sensitivity of bacteria LFIAs.

A simple, sensitive and colorimetric assay for Pseudomonas aeruginosa infection analysis

Skin and soft tissue infections caused by Pseudomonas aeruginosa are common acquired diseases in postpartum care. Many methods have been developed in recent years for detecting P. aeruginosa, but they are criticized for the drawbacks of labor-intensiveness, complicated operation and high cost. Here, a simple, sensitive and colorimetric assay for P. aeruginosa detection is described. The approach displays a green color for positive samples and colorless for target-free samples. The approach exhibits a wide detection range and a low limit of detection of 45 CFU/ml. Thus, the developed ligation-initiated multiple-signal amplification method may be used for on-site testing of pathogenic bacteria and assist in the early diagnosis of postpartum care skin infections.

Engineered Collaborative Size Regulation and Shape Engineering of Tremella-Like Au-MnOx for Highly Sensitive Bimodal-Type Lateral Flow Immunoassays

Engineered collaborative size regulation and shape engineering of multi-functional nanomaterials (NPs) offer extraordinary opportunities for improving the analysis performance. It is anticipated to address the difficulty in distinguishing color changes caused by subtle variations in target concentrations, thereby facilitating the highly sensitive analysis of lateral flow immunoassays (LFIAs). Herein, tremella-like gold-manganese oxide (Au-MnOx ) nanoparticles with precise MnCl2 regulation are synthesized as immuno signal tracers via a facile one-step redox reaction in alkaline condition at ambient temperature. Avail of the tunable elemental composition and anisotropy in morphology, black-colored tremella-like Au-MnOx exhibits superb colorimetric signal brightness, enhanced antibody coupling efficiency, marvelous photothermal performance, and unrestricted immunological recognition affinity, all of which facilitate highly sensitive multi-signal transduction patterns. In conjunction with the handheld thermal reader device, a bimodal-type LFIA that combines size-regulation- and shape-engineering-mediated colorimetric-photothermal dual-response assay (coined as the SSCPD assay) with a limit of detection of 0.012 ng mL-1 for ractopamine (RAC) monitoring is achieved by integrating Au-MnOx with the competitive-type immunoreaction. This work illustrates the effectiveness of this strategy for establishing high-performance sensing, and the SSCPD assay may be extended to a wide spectrum of future point-of-care (POC) diagnostic applications.

New technologies and reagents in lateral flow assay (LFA) designs for enhancing accuracy and sensitivity

Lateral flow assays (LFAs) are a popular method for quick and affordable diagnostic testing because they are easy to use, portable, and user-friendly. However, LFA design has always faced challenges regarding sensitivity, accuracy, and complexity of the operation. By integrating new technologies and reagents, the sensitivity and accuracy of LFAs can be improved while minimizing the complexity and potential for false positives. Surface enhanced Raman spectroscopy (SERS), photoacoustic techniques, fluorescence resonance energy transfer (FRET), and the integration of smartphones and thermal readers can improve LFA accuracy and sensitivity. To ensure reliable and accurate results, careful assay design and validation, appropriate controls, and optimization of assay conditions are necessary. Continued innovation in LFA technology is crucial to improving the reliability and accuracy of rapid diagnostic testing and expanding its applications to various areas, such as food testing, water quality monitoring, and environmental testing.

Urchin-Shaped Au-Ag@Pt Sensor Integrated Lateral Flow Immunoassay for Multimodal Detection and Specific Discrimination of Clinical Multiple Bacterial Infections

A new lateral flow immunoassay strip (LFIA) combining sensitive detection and identification of multiple bacteria remains a huge challenge. In this study, we first developed multifunctional urchin-shaped Au-Ag@Pt nanoparticles (UAA@P NPs) with a unique combination of colorimetric-SERS-photothermal-catalytic (CM/SERS/PT/CL) properties and integrated them with LFIA for multiplexed detection and specific discrimination of pathogenic bacteria in blood samples. Unlike the conventional LFIA that relied on antibody (Ab), this novel LFIA introduced 4-mercaptophenylboronic acid (4-MPBA) as an ideal Ab replacer that was functionalized on UAA@P NPs (UAA@P/M NPs) with outstanding binding and enrichment capacities toward bacteria. Taking Staphylococcus aureus (S. aureus) as model bacteria, the limit of detection (LOD) was 3 CFU/mL for SERS-LFIA, 27 CFU/mL for PT-LFIA, and 18 CFU/mL for CL-LFIA, three of which were over 330-fold, 37-fold, and 55-fold more sensitive than ordinary visual CM-LFIA, respectively. Besides, this SERS-LFIA is capable of identifying three types of bacterial spiked blood samples (E. coli, S. aureus, and P. aeruginosa) effectively according to specific bacterial Raman "fingerprints" by partial least-squares-discriminant analysis (PLS-DA). More importantly, this LFIA was successfully applied to blood samples with satisfactory recoveries from 90.3% to 108.8% and capable of identifying the infected patients (N = 4) from healthy subjects (N = 2) with great accuracy. Overall, the multimodal LFIA incorporates bacteria discrimination and quantitative detection, offering an avenue for early warning and diagnosis of bacterial infection.

Enhanced sensitivity and accuracy via gold nanoparticles based multi-line lateral flow immunoassay strip for Salmonella typhimurium detection in milk and orange juice

Food borne pathogens threaten food safety and affect human health. The lateral flow immunoassays (LFIAs) are widely concerned because of simplicity, low cost and user friendliness, and have broad application prospects in pathogen detection. However, the sensitivity of LFIAs is limited. Herein, multi-line LFIAs are introduced into pathogen detection for the first time. Compared with traditional single-line LFIAs, the overall signal strength of multi-line LFIAs has been significantly improved. It is particularly noteworthy that multi-line LFIAs detection accuracy of 10³ CFU/mL pathogen has been improved by about 55%. The proposed multi-line LFIAs reduce the possibility of judging a positive result as a false negative result. The LFIAs strip was validated in real samples of milk and orange juice. This strategy has great potential for rapid detection of pathogens in real samples, and provides new insights for improving the accuracy and sensitivity of LFIAs strips.

"Lock-and-key" recognizer-encoded lateral flow assays toward foodborne pathogen detection: An overview of their fundamentals and recent advances

In light of severe health risks of foodborne pathogenic bacterial diseases, the potential utility of point-of-care (POC) sensors is recognized for pathogens detection. In this regard, lateral flow assay (LFA) is a promising and user-friendly option for such application among various technological approaches. This article presents a comprehensive review of "lock-and-key" recognizer-encoded LFAs with respect to their working principles and detection performance against foodborne pathogenic bacteria. For this purpose, we describe various strategies for bacteria recognition including the antibody-based antigen-antibody interactions, nucleic acid aptamer-based recognition, and phage-mediated targeting of bacterial cells. In addition, we also outline the technological challenges along with the prospects for the future development of LFA in food analysis. The LFA devices built based upon many recognition strategies are found to have great potential for rapid, convenient, and effective POC detection of pathogens in complex food matrixes. Future developments in this field should emphasize the development of high-quality bio-probes, multiplex sensors, and intelligent portable readers.

NIR II light response-based PDA/AuPt@CuS composites: Simultaneous readout of temperature and pressure sensing strategy for portable detection of pathogenic bacteria

In this study, we developed a simultaneous readout of pressure and temperature dual-signals platform based on the second near-infrared (NIR II) light response-based polydopamine (PDA)-functionalized-AuPt nanoparticles (NPs)@CuS nanosheets (PDA/AuPt@CuS NS) composite. Due to the excellent NIR photothermal performance of PDA/AuPt@CuS NS, it contribute to the decomposition of H₂O₂ and NH₄HCO₃ to generate gases (including O₂, CO₂, and NH₃₎ can be promoted, which can amplify the pressure signals in a sealed container. A sandwich mode is formed between Fe₃O₄ NPs and PDA/AuPt@CuS NS based on the dual-aptamer when target pathogenic bacteria is present. And, it is possible to convert the molecular recognition signals between the dual-aptamers into amplified pressures and temperatures, which can be read out by a portable pressure meter and smartphones simultaneously. It may offer the possibility for quantitative POCT analysis of Pathogenic Bacteria. Moreover, because of the high photothermal efficiency of this method, the developed dual-mode method can achieve that following the detection of bacteria and killing them immediately. As a result, secondary contamination is eliminated and bacterial transmission is avoided. The developed dual-signal sensing platform is also inexpensive, simple to operate and rapidly, indicating that it can be used for food safety analysis, clinical applications, and environmental monitoring.

A multi-line platinum nanozyme-based lateral flow device for the colorimetric evaluation of total antioxidant capacity in different matrices

The evaluation of Total Antioxidant Capacity (TAC), namely the complete pattern of antioxidant species in a complex medium, is of major interest in many fields ranging from health monitoring to quality control in the food industry. In this framework, point-of-care (POC) testing technologies are a promising diagnostic solution for rapid on-site analyses, unlike laboratory based-assays, which are often limited by centralized analyses, time-consuming and costly procedures, and invasiveness in the case of health diagnostics. In this work, we developed a POC methodology that evaluates TAC in different matrices, exploiting the peroxidase-like properties of 5 nm platinum nanoparticles (PtNPs), combined with a colorimetric paper-based device. Notably, we designed and optimized a multi-line PtNPs-based Lateral Flow Assay (LFA), which relies on three sequential test lines with increasing concentrations of platinum nanozymes, to get a non-invasive, accurate, and fast (10 minutes) colorimetric evaluation of the body TAC in saliva samples. Furthermore, we employed the device as a prototype of a quality control tool in the food industry, for the determination of the TAC in fruit juices.

Recent progress in aptamer and CRISPR-Cas12a based systems for non-nucleic target detection

Efficient and sensitive detection of targets is one of the motivations for constant development and innovation of various biosensors. CRISPR-Cas12a, a new generation of gene editing tools, has shown excellent application potential in biosensor design and construction. By combining with the specific recognition element-aptamer, a single-stranded oligonucleotide obtained by systematic evolution of ligands by exponential enrichment (SELEX) in vitro screening, CRISPR-Cas12a also shows superior performance non-nucleic acid targets detection, such as small molecules, proteins, virus and pathogenic bacteria. However, aptamer and CRISPR-Cas12a (CRISPR-Cas12a/Apt) still face some problems in non-nucleic acid target detection, such as single signal response mode and narrow linear range. The development of diverse CRISPR-Cas12a/Apt biosensors is necessary to meet the needs of various detection environments. In this review, the working principle of CRISPR-Cas12a/Apt was introduced and recent progress in CRISPR-Cas12a/Apt in the application of non-nucleic acid target detection was summarized. Moreover, the requirements of critical parameters such as crRNA sequence, activator sequence, and reaction system in the design of CRISPR-Cas12a/Apt biosensors were discussed, which could provide the reference for the design of efficient and sensitive novel non-nucleic acid target biosensors. In addition, the challenges and prospects of CRISPR-Cas12a/Apt-based biosensor were further presented.

Nanosheet antibody mimics based label-free and dual-readout lateral flow immunoassay for Salmonella enteritidis rapid detection

Portable devices for on-site foodborne pathogens detection are urgently desirable. Lateral flow immunoassay (LFIA) provides an efficient strategy for pathogens detection, however, antibody labeling independence and detection reliability, are still challenging. Here, we report the development of a label-free LFIA with dual-readout using glucan-functionalized two-dimensional (2D) transition metal dichalcogenides (TMDs) tungsten disulfide (WS₂) as detection probes for sensitive detection of Salmonella enteritidis (S. enteritidis). In particular, glucan-functionalized WS₂, synthesized via liquid exfoliation, are reliable detection antibody candidates which served as antibody mimics for bacteria capturing. This LFIA has not only eliminated the intricate antibody labeling process and screening of paired antibodies in conventional LFIAs, but also promised dual-readout (colorimetric/Raman) for flexible detection. Under optimized conditions, this LFIA achieves selective detection of S. enteritidis with a low visual detection limit of 10³ CFU/mL and a broad linear range of 10³-10⁸ CFU/mL. Additionally, the LFIA could be successfully applied in drinking water and milk with recoveries of 85%-109%. This work is desirable to expand the application of 2D TMDs in biosensors and offers a brand-new alternative protocol of detection antibodies in foodborne pathogens detection.

Joint-detection of Salmonella typhimurium and Escherichia coli O157:H7 by an immersible amplification dip-stick immunoassay

To explore the superiority of multifunctional nanocomposites and realize the joint-detection of foodborne pathogens, an immersible amplification dip-stick immunoassay (DSIA) was exploited for the sensitive detection of Salmonella typhimurium (S. typhi) and Escherichia coli O157:H7 (E. coli O157:H7). Saving for the basic colorimetric performance, the reporter molecule of CoFe₂O₄ (CFO) possesses multivalent elements (Co^2+/3+, Fe^2+/3+) as well as multifunction of superior catalase-like activity and magnetic properties. By dint of the catalytic activity of CFO, a directly immersible amplification can be simply achieved to endure the DSIA with an intensive signal and a dual-visible mode for the determination of S. typhi and E. coli O157:H7. In virtue of the magnetic separation and enrichment capability of the CFO, the DSIA can perform a matrix-interference-free detection and obtain a dynamic detection range of 10²-10⁸ CFU/mL and a low assay limit of 10² CFU/mL. Moreover, the DSIA has reasonable recovery rates for contamination monitoring of two target bacteria in milk and beef samples. Our research provides a persuasive supplement for the application of multifunctional nanocomposites in the ongoing dip-stick immunoassay and an alternative strategy for the efficient detection of foodborne pathogens.