A physically crosslinked polydopamine/nanocellulose hydrogel as potential versatile vehicles for drug delivery and wound healing

Nanocellulose composites with enhanced mechanical and flame-retardant properties based on grafting of inorganic organic/multilayer core-shell matter - MSNs-TMSB/DA/TOCNF

Flame retardant materials are essential for safety, yet their development is often hindered by trade-offs between efficiency, aging resistance, and mechanical properties. Traditional organic flame retardants are inefficient and degrade over time, while inorganic alternatives, despite their effectiveness, are difficult to integrate into composites. Here we showed the synthesis of a novel inorganic silica-based flame retardant, PDA@MSNs-TMSB, which chemically modified nanocellulose fibrils, enhancing flame retardancy, aging resistance, and toughness without compromising integrity. The results showed that, compared to pure TOCNF, the modified nanocellulose materials (TOCNF-PDA@MSNs-TMSB) exhibited a higher limiting oxygen index (46.5 %), reaching the UL-94 V-0 level (GB) rating with self-extinguishing behavior and no flame propagation. In contrast, pure TOCNF had a limiting oxygen index of only 22 % and burned rapidly upon ignition which did not achieve the UL-94 V-0 level rating. The toughness of the modified TOCNF-PDA@MSNs-TMSB was superior to that of pure TOCNF, representing a 37.5 % increase. Combining powerful tenacity, high flame retardancy, and better aging resistance, the flame retardant nanocellulose material from renewable resource shows great potential for flame retardant applications and emits no toxic byproducts post-combustion.

"Monitor-and-treat" that integrates bacterio-therapeutics and bio-optics for infected wound management

Wound infections are one of the major threats to human health, accounting for millions of deaths annually. Real-time monitoring, accurate diagnosis, and on-demand therapy are crucial to minimizing complications and saving lives. Herein, we propose a "monitor-and-treat" strategy for infected wound management by integrating the emerging development of bacterio-therapeutics and bio-optics. The upper layer consists of gelatin methacryloyl (GelMA)-collagen III methacryloyl (Col3MA) (GC), Reuterin (Reu) isolated from the probiotic Lactobacillus reuteri (L. reuteri) and microfluidic safflower polysaccharide (SPS)@GelMA microspheres using 3D printing technology. The lower layer is made of acryloylated glycine (ACG) hydrogel with tissue adhesion capability, which enables the hydrogel to adapt to the movement and stretching of the skin. By integrating temperature-sensitive polydimethylsiloxane (PDMS) optical fibers, the ACG-GC/Reu/SPS-PDMS hydrogel could accurately and steadily sense and send wound temperature information to intelligent devices for real-time monitoring of the healing status ("monitor"). The double-layered hydrogel not only inhibited bacterial survival and colonization (97.4 % against E. coli and 99 % against S. aureus), but also exhibited remarkable hemostatic properties. Furthermore, it was conducive to L929 cell proliferation and pro-angiogenesis, and promoted the polarization of pro-inflammatory M1 macrophages to the anti-inflammatory M2-phenotype, therefore creating a favorable immune microenvironment at the wound site. Animal experiments using SD rats and Bama minipigs demonstrated that this hydrogel promoted wound closure, directed polarization to M2 macrophages, alleviated inflammation, enhanced neovascularization, therefore accelerating infected wound healing ("treat"). In addition, RNA-Seq analysis revealed the mechanism of action of ACG-GC/Reu/SPS-PDMS hydrogel in modulating key signaling pathways, including down-regulation of AMPK, IL-17, and NF-κB signaling pathways, activation of NLRP3 inflammatory vesicles, and enrichment of MAPK, TGF-β, PI3K-Akt, TNF, and VEGF signaling pathways. The modulation of these signaling pathways suggests that hydrogels play an important role in the molecular mechanisms that promote wound healing and tissue regeneration. Therefore, the design of this study provides an innovative and multifunctional bandage strategy that can significantly improve pathologic diagnosis and wound treatment.

A self-powered casein hydrogel E-dressing with synergistic photothermal therapy, electrical stimulation, and antibacterial effects for chronic wound management

Triboelectric nanogenerators (TENGs) have recently demonstrated great application potential for accelerating wound healing in the field of medical research due to their unique electrical stimulation effect. Among the various types of TENGs, solid-liquid TENGs have attracted much attention due to their significant advantages, such as high contact-separation efficiency and a wide range of liquid motion. Therefore, this study innovatively proposed a solid-liquid biphasic TENG electronic dressing constructed from a casein hydrogel enhanced by the metal-organic framework Zeolitic Imidazolate Framework-8 (ZIF-8). This hydrogel dressing comprised sodium caseinate (SC)/multi-walled carbon nanotubes-polydopamine@polydopamine (MWCNT@PDA)/polyacrylamide (PAM)/ZIF-8. It ingeniously integrates multiple functions such as photothermal, photodynamic antibacterial, and electrical stimulation therapies, thereby establishing a new multimodal synergistic treatment paradigm. Notably, the addition of ZIF-8 not only controlled photothermal release of antibacterial agents but also facilitates the development of a distinctive solid-liquid biphasic operational modality in TENG system, achieving a 131 V peak output voltage through significant enhancement of electrical performance parameters. In addition, the TENG-based system adopts a non-contact electrical stimulation method for wound treatment, fundamentally reducing the risk of infection caused by direct contact. Experiments using mouse fibroblasts revealed that the simultaneous real-time use of near-infrared light and TENG can significantly improve the cell migration process. Empirical studies on animals demonstrated that it could accelerate tissue regeneration and wound healing by increasing collagen deposition and angiogenesis. Based on these results, this study provides new perspectives for the developing intelligent biomedical composites for future wound management. STATEMENT OF SIGNIFICANCE: Chronic wounds have become a major threat to global medical and health fields due to pathogenic infections. Traditional wound dressings mostly focus on passive healing, which has limited effectiveness. To overcome these limitations, we developed an electronic dressing of a casein-based hydrogel TENG enhanced by a MOF. This electronic dressing combines photothermal, photodynamic antibacterial, and electrical stimulation functions and efficiently promotes wound healing through multifunctional synergy. This research provides a promising solution for diabetic wound care and a broader field of chronic wound treatment. It is a solid step in the scientific exploration of interdisciplinary integration, offering new ideas for making the wound treatment field more intelligent, efficient, and precise.

Bio-based composite hydrogel/film reinforced by hyperbranched lignin nanoparticles: Robustness, thermostability, thermal insulation and UV shielding

Most of the bio-based hydrogels tend to malfunction under a high-temperature condition, as the crosslinked network structure readily disintegrates, failing to meet the demands of hot environment. Herein, we exploit a thermostable composite hydrogel (CH) mainly using bio-based hyperbranched lignin nanoparticles (H-LNPs), TEMPO-oxidized cellulose nanofibers (TOCN), and scleroglucan (Slg), followed by a slow evaporation to form a multifunctional CH film. Thanks to the uniform distribution of H-LNPs and TOCN, which are rich in hydroxyl groups, within the hydrogel matrix, the crosslinking density, storage modulus, loss modulus, and thermal stability of the CHs are remarkably enhanced. As a result, the optimum CH demonstrates excellent thermal resistance and structural stability even after 196 h at 140 °C. Moreover, the resultant CH film exhibits outstanding UV shielding (>99.8 %) and solar radiation shielding (cooling 6.6 °C), endowing it as an ideal candidate for thermal insulation. These findings underscore the potential of H-LNPs in the development of robust, thermostable, and thermally insulating hydrogels for industrial applications in extreme environments.

SHP099-containing multi-targeting hydrogel promotes rapid skin reconstruction through modulating a variety of cells

Introduction

Adult wound scarring result in functional skin deficits. However, the development of effective measures to modulate the entire wound healing to encourage the skin function reconstruction is still a clinical challenge, as multiple cells are involved in wound healing hierarchically. Hydrogel scaffolds with long-lasting local release provide new insights into the clinical relevance of entire wound healing.

Methods

Herein, a multi-targeting hydrogel loaded with SHP099 (Gel-SHP) is designed to modulate multiple cells during wound repair.

Results

Our results show that Gel-SHP promotes rapid reconstruction of wound skin by modulating macrophages in the inflammatory stage, fibroblasts in the regeneration stage and smooth muscle cells in the remodelling stage. Gel-SHP could increase M2 macrophage differentiation and remodel the dermal shell of hair follicles through in situ release. Moreover, Gel-SHP may modulate myofibroblasts to promote wound contraction through SHP099-scaffold synergistic interactions.

Discussion

Our results provide new insights into the design of functional hydrogels for tissue regeneration applications. Gel-SHP as a promising tool could provide new clues and new research paradigms for future studies and understanding of the wound healing process and dermal shell formation.

Hybrid three-dimensional printing and encapsulation process for cellulose hydrogel sensors

The advancement of three-dimensional (3D) printing technology has further promoted the scientific progression of hydrogels within the realm of wearable devices. However, when the viscosity of the hydrogel precursor is large but does not meet the self-supporting requirements, or lacks the participation of monomer with gel phase change characteristics, the 3D printing preparation of hydrogels often becomes difficult. This study delves into a novel 3D printing method aimed at combining direct ink writing (DIW) with vat photopolymerization (VPP) to achieve a broad spectrum of adjustable mechanical properties by introducing cellulose as a medium to modulate both the mechanical and rheological properties of hydrogels. This hybrid method facilitates the efficacious printing preparation of low-viscosity hydrogels, thereby mitigating the stringent viscosity prerequisites inherent in printable hydrogels. Furthermore, the employment of a dual-core coaxial printing technique for the hybrid printing of hydrogel and elastomer serves to ameliorate hydrogel water loss predicaments. As a result, this new 3D printing method broadens the mechanical properties of printable hydrogels and the adjustable range of system viscosity. At the same time, it realizes the integrated printing of encapsulation layer, and improves the service life of hydrogels, and can be applied to the hydrogel-based sensors.

Starfish-Inspired Synergistic Reinforced Hydrogel Wound Dressing: Dual Responsiveness and Enhanced Bioactive Compound Delivery for Advanced Skin Regeneration and Management

Effective wound management demands advanced dressings that protect while actively supporting healing. Traditional wound dressings often fall short of meeting the complex needs of skin repair. Inspired by the regenerative abilities of starfish, we developed a bionically engineered hydrogel designed to enhance wound healing. The hydrogel is synthesized through the coassembly of dopamine-modified cellulose nanofibers, chitosan, (3-aminobenzeneboronic acid)-grafted oxidized dextran, and poly(vinyl alcohol), utilizing dynamic Schiff base and boronic ester linkages. This innovative design imparts multifunctional properties, including injectability, 3D printability, antibacterial activity, self-adhesion, self-healing, antioxidant protection, and hemostasis, which emulate the defense mechanisms and regenerative processes of starfish. These characteristics work synergistically to reduce infection and oxidative stress and improve healing efficiency. Additionally, the hydrogel incorporates mangiferin and Vitamin C, which are released in a controlled manner in response to the wound's microenvironment (pH and reactive oxygen species), promoting tissue regeneration and reducing inflammation. In vitro tests confirmed its dual responsiveness, while finite element modeling validated the controlled release of bioactive compounds. In vivo testing on a rat full-thickness wound model showed a 100% healing rate by day 13, significantly outperforming commercial alternatives. The hydrogel's nontoxicity and advanced healing capabilities make it a promising solution for patients with critical healing needs, offering a comprehensive integration of natural biological processes and cutting-edge engineering.

Construction of a non-toxic interpenetrating network hydrogel drug carrier supported by carbon microspheres and nanocellulose

To develop a stable hydrogel drug carrier with excellent biocompatibility, biodegradability and low toxicity, a green biomass-based hydrogel was prepared as a methylene blue (MB) drug carrier model using cellulose and sodium alginate (SA) polysaccharide. The addition of nanocellulose (CNF) and hydrothermally prepared carbon microspheres to the hydrogel network formed by SA undergoing chelation with Ca2+ enhanced the multifaceted properties of the drug carrier. Additionally, the prepared SA-CNFgelCS0.1 could withstand a pressure of 8.64 N and showed good compressive and elastic properties. Meanwhile, its encapsulation rate and drug loading capacity could reach 95.5 % and 19.36 mg/g, respectively. The drug release rate reached 43.4 % at 100 h in PBS solution simulating the pH value of the gastric environment, indicating good pH-responsiveness and long-lasting release ability during the drug-carrying release process. The release mechanism of the drug carrier to MB was investigated by different release kinetic models, which was in accordance with the first-order kinetic model. SA-CNFgelCS0.1 at high concentration also did not affect the number of pancreatic cell survival and showed a high degree of biocompatibility. In addition to that, SA-CNFgelCS0.1 can reach 100 % degradation rate in 18 days, which has no burden on the environment during use. The present study offers a novel approach to the synthesis of a biomass drug-carrying model with enhanced performance. Furthermore, this drug carrier provides a promising foundation for the development of oral MB as a potential treatment for gastrointestinal diseases and other chronic condition.

Synchronized ultrasonography and electromyography signals detection enabled by nanocellulose based ultrasound transparent electrodes

Accurate evaluation of electrophysiological and morphological characteristics of the skeletal muscles is critical to establish a comprehensive assessment of the human neuromusculoskeletal function in vivo. However, current technological challenges lie in unsynchronized and unparallel operation of separate acquisition systems such as surface electromyography (sEMG) and ultrasonography. Key problem is the lack of ultrasound transparency of current electrophysiological electrodes. In this work, ultrasound (US) transparent electrode based on cellulose nanofibrils (CNF) substrate are proposed to solve the issue. US transparency of the electrodes are evaluated using a standard US phantom. The effects of nanocellulose type and ion-bond introduction on electrode performance is investigated. Simultaneous US image and sEMG signal acquisition of biceps brachii during isometric muscle contraction are studied. Reliable correlation analysis of the US and sEMG signals is realized which is rarely reported in the previous literatures. Recyclability and biodegradability of the current electrode are evaluated. The reported technology opens up new pathways to provide coupled anatomical and electrical information of the skeletal muscles, enables reliable anatomical and electrical information correlation analysis and largely simplify the sensor integration for assessment of the human neuromusculoskeletal function.

Calcium Cross-Linked Cellulose Nanofibrils: Hydrogel Design for Local and Controlled Nitric Oxide Release

Nitric oxide (NO) holds promise for wound healing due to its antimicrobial properties and role in promoting vasodilation and tissue regeneration. The local delivery of NO to target cells or organs offers significant potential in numerous biomedical applications, especially when NO donors are integrated into nontoxic viscous matrices. This study presents the development of robust cellulose nanofibril (CNF) hydrogels designed to control the release of nitric oxide (NO) generated in situ from a NO-donor molecule (S-nitrosoglutathione, GSNO) obtained from the nitrosation of its precursor molecule glutathione (GSH). CNF, efficiently isolated from sugar cane bagasse, exhibited a high aspect ratio and excellent colloidal stability in water. Although depletion forces could be observed upon the addition of GSH, this effect did not significantly alter the morphology of the CNF network at low GSH concentrations (<20 mM). Ionic cross-linking with Ca2+ resulted in nontoxic and robust hydrogels (elastic moduli ranging from 300 to 3000 Pa) at low CNF solid content. The release rate of NO from GSNO decreased in CNF from 1.61 to 0.40 mmol. L-1·h-1 when the nanofibril content raised from 0.3 to 1.0 wt %. The stabilization effect monitored for 16 h was assigned to hydrogel mesh size, which was easily tailored by modifying the concentration of CNF in the initial suspension. These results highlight the potential of CNF-based hydrogels in biomedical applications requiring a precise NO delivery.

Nanostructured Hydrogels of Carboxylated Cellulose Nanocrystals Crosslinked by Calcium Ions

Bio-based eco-friendly cellulose nanocrystals (CNCs) gain an increasing interest for diverse applications. We report the results of an investigation of hydrogels spontaneously formed by the self-assembly of carboxylated CNCs in the presence of CaCl2 using several complementary techniques: rheometry, isothermal titration calorimetry, FTIR-spectroscopy, cryo-electron microscopy, cryo-electron tomography, and polarized optical microscopy. Increasing CaCl2 concentration was shown to induce a strong increase in the storage modulus of CNC hydrogels accompanied by the growth of CNC aggregates included in the network. Comparison of the rheological data at the same ionic strength provided by NaCl and CaCl2 shows much higher dynamic moduli in the presence of CaCl2, which implies that calcium cations not only screen the repulsion between similarly charged nanocrystals favoring their self-assembly, but also crosslink the polyanionic nanocrystals. Crosslinking is endothermic and driven by increasing entropy, which is most likely due to the release of water molecules surrounding the interacting COO- and Ca2+ ions. The hydrogels can be easily destroyed by increasing the shear rate because of the alignment of rodlike nanocrystals along the direction of flow and then quickly recover up to 90% of their viscosity in 15 s, when the shear rate is decreased.

Injectable antibacterial hydrogels based on oligolysines for wound healing

Generally, oligolysine has poor antibacterial effect and almost no antibacterial activity. Herein, low cost and easily available oligolysines were chosen to prepare injectable antibacterial hydrogel (PVAL-gel) for wound healing. The hydrogel network was formed by cross-linking vanillin acrylate-N, N-dimethylacrylamide copolymer P(VA-co-DMA), oligolysine and adipate dihydrazide through Schiff base bond. The obtained hydrogel PVAL-gel exhibited not only excellent self-healing capability and injectability, but also the efficient contact antibacterial ability and good inhibitory effects on E.coli and S.aureus. In vitro, 99.9 % of pathogenic bacteria was killed within 160 min. Furthermore, the injectable PVAL-gel could rapidly eradicate bacteria in infected wounds and notably enhance the healing of full-thickness skin wounds. Therefore, PVAL-gel is expected to be used as a high-end dressing for the treatment of infected skin wounds, which can promote wound healing.

The potential of nanofibrillated cellulose from Hevea brasiliensis to produce films for bio-based packaging

Cellulose micro/nanofibril (MNFC) films are an interesting alternative to plastic-based films for application in biodegradable packaging. In this study, we aimed to produce and characterize MNFC films obtained from alkaline-pretreated rubberwood (Hevea brasiliensis) waste and Eucalyptus sp. commercial pulp. MNFC and films were evaluated regarding microstructure; crystallinity; stability; and physical, optical, mechanical, and barrier properties. A combined quality index (QI) was also calculated. Eucalyptus MNFC suspensions were more stable than H. brasiliensis. Both films had a hydrophobic surface (>90°) and high grease resistance (oil kit 12). H. brasiliensis films had lower transparency (26.4 %) and high crystallinity (∼89 %), while Eucalyptus films had lower permeability and higher mechanical strength. The QI of MNFC was 51 ± 5 for H. brasiliensis and 55 ± 4 for Eucalyptus, showing that both types of raw material have potential for application in the packaging industry and in the reinforcement of composites, as well as for high value-added applications in products made from special materials.

Fabrication of polydopamine-modified cellulose hydrogel for controlled release of α-mangostin

Hydrogels are notable for their outstanding absorbent qualities, satisfactory compatibility with biological systems, ability to degrade, and inherent safety, all of which contribute to their high demand in the field of biomedicine. This study focuses on the fabrication of hydrogels using environmentally friendly cellulosic material. Cellulose hydrogel beads were prepared by physical cross-linking in a NaOH/urea medium. Furthermore, nano polydopamine was integrated into the hydrogel matrix as functional polymers and α-mangostin was employed as an active pharmaceutical ingredient. The physicochemical properties were comprehensively analyzed using Fourier-transform infrared spectrometer, 13C cross-polarization/magic angle spinning nuclear magnetic resonance, thermogravimetric analysis, and scanning electron microscope. The drug delivery properties, including water content, swelling ratio, and drug release profiles, were evaluated. In vitro cytotoxicity against MC3T3-E1 cells was assessed using sulforhodamine B staining. All test hydrogels exhibited inhibitory activity against the growth of MC3T3-E1 cells. These results indicated the potential use of these hydrogels as a drug delivery carrier for α-mangostin in the treatment of ankylosing spondylitis.

Recent developments in sugarcane bagasse fibre-based adsorbent and their potential industrial applications: A review

In recent years, there has been an increase in research devoted to the advancement of cellulose and nanocellulose-based materials, which are advantageous due to their renewable nature, strength, rigidity, and environmental friendliness. This exploration complies with the fundamental tenets of environmental stewardship and sustainability. An area of industrial biotechnology where cellulosic agricultural residues have the potential to be economically utilized is through the conversion of such residues; sugarcane bagasse is currently leading this charge. SCB, a plentiful fibrous byproduct produced during the sugarcane industry's operations, has historically been utilized in various sectors, including producing paper, animal feed, enzymes, biofuel conversion, and biomedical applications. Significantly, SCB comprises a considerable amount of cellulose, approximately 40 % to 50 %, rendering it a valuable source of cellulose fibre for fabricating cellulose nanocrystals. This review sheds light on the significant advances in surface modification techniques, encompassing physical, chemical, and biological treatments, that enhance sugarcane bagasse fibres' adsorption capacity and selectivity. Furthermore, the paper investigates the specific advancements related to the augmentation of sugarcane bagasse fibres' efficacy in adsorbing a wide range of pollutants. These pollutants span a spectrum that includes heavy metals, dyes, organic pollutants, and emerging contaminants. The discussion provides a comprehensive overview of the targeted removal processes facilitated by applying modified fibres. The unique structural and chemical properties inherent in sugarcane bagasse fibres and their widespread availability position them as highly suitable adsorbents for various pollutants. This convergence of attributes underscores the potential of sugarcane bagasse fibres in addressing environmental challenges and promoting sustainable solutions across multiple industries.

Synthesis and characterization of Gellan gum-based hydrogels for the delivery of anticancer drug etoposide

Present research work reports the synthesis of Gellan gum (Gg) and methacrylic acid (MA) based grafted hydrogels (Gg-cl-poly(MA)) crosslinked using N, N'- methylene-bis-acrylamide (MBA) and the evaluation of their efficiency to be used as a sustained drug delivery carrier for anticancer drug i.e., etoposide. Various characterization techniques like Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) confirmed the grafting of Gg with MA and the formation of crosslinked Gg-cl-poly(MA) hydrogel polymer. The synthesized hydrogel showed pH-dependent swelling properties and exhibited a maximum swelling capacity of 867 % under optimized environmental conditions. The Gg-cl-poly(MA) was biocompatible and non-cytotoxic, which was confirmed by the hemolytic and cytotoxic tests. The release dynamics of etoposide from the Gg-cl-poly(MA) polymer matrix was checked under specific physiological conditions. Drug release was found to be significantly higher in the acidic medium, followed by the neutral and alkaline medium. This clearly indicated that etoposide drug release through synthesized hydrogel was stomach-specific and it is effective for the treatment of stomach cancer. The release mechanism of the etoposide drug was a Fickian-type diffusion mechanism in the acidic medium and a non-Fickian-type diffusion mechanism in the neutral and alkaline medium. The release profile of the etoposide was best fitted to the first-order rate model. The results showed that the synthesized hydrogel (i.e., Gg-cl-poly(MA)) was biocompatible, non-toxic, and could be used for the treatment of stomach cancer.

Controlled Release of Curcumin and Hypocrellin A from Electrospun Poly(l-Lactic Acid)/Silk Fibroin Nanofibers for Enhanced Cancer Cell Inhibition

Nanofibers have emerged as a highly effective method for drug delivery, attributed to their remarkable porosity and ability to regulate drug release rates while minimizing toxicity and side effects. In this study, we successfully loaded the natural anticancer drugs curcumin (CUR) and hypocrellin A (HA) into pure poly(l-lactic acid) (PLLA) and PLLA-silk protein (PS) composite nanofibers through electrospinning technology. This result was confirmed through comprehensive analysis involving SEM, FTIR, XRD, DSC, TG, zeta potential, and pH stability analysis. The encapsulation efficiency of all samples exceeded 85%, demonstrating the effectiveness of the loading process. Additionally, the drug release doses were significantly higher in the composites compared to pure PLLA, owing to the enhanced crystallinity and stability of the silk proteins. Importantly, the composite nanofibers exhibited excellent pH stability in physiological and acidic environments. Furthermore, the drug-loaded composite nanofibers displayed strong inhibitory effects on cancer cells, with approximately 28% (HA) and 37% (CUR) inhibition of cell growth and differentiation within 72 h, while showing minimal impact on normal cells. This research highlights the potential for controlling drug release through the manipulation of fiber diameter and crystallinity, paving the way for wider applications of electrospun green nanomaterials in the field of medicine.

Effects of the Amylose/Amylopectin Ratio of Starch on Borax-Crosslinked Hydrogels

Herein, we simultaneously prepared borax-crosslinked starch-based hydrogels with enhanced mechanical properties and self-healing ability via a simple one-pot method. The focus of this work is to study the effects of the amylose/amylopectin ratio of starch on the grafting reactions and the performance of the resulting borax-crosslinked hydrogels. An increase in the amylose/ amylopectin ratio increased the gel fraction and grafting ratio but decreased the swelling ratio and pore diameter. Compared with hydrogels prepared from low-amylose starches, hydrogels prepared from high-amylose starches showed pronouncedly increased network strength, and the maximum storage modulus increased by 8.54 times because unbranched amylose offered more hydroxyl groups to form dynamic borate ester bonds with borate ions and intermolecular hydrogen bonds, leading to an enhanced crosslink density. In addition, all the hydrogels exhibited a uniformly interconnected network structure. Furthermore, owing to the dynamic borate ester bonds and hydrogen bonds, the hydrogel exhibited excellent recovery behavior under continuous step strain, and it also showed thermal responsiveness.

Physiological Roles of Eumelanin- and Melanogenesis-Associated Diseases: A Look at the Potentialities of Engineered and Microbial Eumelanin in Clinical Practice

This paper aims to highlight the physiological actions exerted by eumelanin present in several organs/tissues of the human body and to rationalise the often conflicting functional roles played by this biopolymer on the basis of its peculiar properties. Besides pigmentary disorders, a growing number of organ injuries and degenerative pathologies are presently ascribed to the modification of physiological eumelanin levels in terms of alterations in its chemical/structural features, and of a partial loss or uneven distribution of the pigment. The present review analyses the more recent research dedicated to the physiological and pathological actions of eumelanin and provides an insight into some melanogenesis-associated diseases of the skin, eye, ear, and brain, including the most significant neurodegenerative disorders. Also described are the potentialities of therapies based on the localised supply of exogeneous EU and the opportunities that EU produced via synthetic biology offers in order to redesign therapeutical and diagnostic applications.

Silk Fibroin Microneedles Loaded with Lipopolysaccharide-Pretreated Bone Marrow Mesenchymal Stem Cell-Derived Exosomes for Oral Ulcer Treatment

Oral ulcers, superficial lesions on the surface of the oral mucosa, have a high incidence rate, and their main symptoms include local pain and erosion. Lipopolysaccharide (LPS)-preconditioned bone marrow mesenchymal stem cells and their secreted exosomes (LPS-pre-Exos) have been shown to promote recovery in various inflammatory conditions and wounds. However, studies documenting LPS-pre-Exos as a therapeutic intervention for oral mucosal-like diseases are lacking. In this study, we prepared a silk fibroin microneedle (MN) patch consisting of LPS-pre-Exos and zeolitic imidazolate framework-8 (ZIF-8) that localized at the tip and base, respectively, and used this MN patch for oral ulcer treatment. Upon insertion into the oral mucosa, continuous LPS-pre-Exos release was observed, which promoted macrophage polarization and tissue healing. Additionally, the ZIF-8 framework in the MN patch facilitated the controlled release of Zn2+, which demonstrated potent antimicrobial properties via synergistic effects. The in vitro experimental results showed that the silk fibroin MN patch can continuously release LPS-pre-Exos and Zn2+ for more than 7 days. Thus, the LPS-pre-Exos and ZIF-8-loaded silk fibroin MN patch exhibited good anti-inflammatory and antibacterial properties, promoting oral ulcer healing, and showed good histocompatibility. Hence, it may represent a potentially valuable strategy for facilitating oral ulcer healing.

Exploring nanocellulose's role in revolutionizing the pharmaceutical and biomedical fields

The increasing global demand for eco-friendly products derived from natural resources has spurred intensive research into biomaterials. Among these materials, nanocellulose stands out as a highly efficient option, consisting of tightly packed cellulose fibrils derived from lignocellulosic biomass. Nanocellulose boasts a remarkable combination of attributes, including a high specific surface area, impressive mechanical strength, abundant hydroxyl groups for easy modification, as well as non-toxic, biodegradable, and environmentally friendly properties. Consequently, nanocellulose has been extensively studied for advanced applications. This paper provides a comprehensive overview of the various sources of nanocellulose derived from diverse natural sources and outlines the wide array of production methods available. Furthermore, it delves into the extensive utility of nanocellulose within the biomedical and pharmaceutical industries, shedding light on its potential role in these fields. Additionally, it highlights the significance of nanocellulose composites and their applications, while also addressing key challenges that must be overcome to enable widespread utilization of nanocellulose.

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

A review of recent advances of cellulose-based intelligent-responsive hydrogels as vehicles for controllable drug delivery system

To realize the maximum therapeutic activity of medicine and protect the body from the adverse effects of active ingredients, drug delivery systems (DDS) featured with targeted transportation sites and controllable release have captured extensive attention over the past decades. Hydrogels with unique three-dimensional (3D) porous structures present tunable capacity, controllable degradation, various stimuli sensitivity, therapeutic agents encapsulation, and loaded drugs protection properties, which endow hydrogels with bred-in-the-bone advantages as vehicles for drug delivery. In recent years, with the impressive consciousness of the "back-to-nature" concept, biomass materials are becoming the 'rising star' as the hydrogels building blocks for controlled drug release carriers due to their biodegradability, biocompatibility, and non-toxicity properties. In particular, cellulose and its derivatives are promising candidates for fabricating hydrogels as their rich sources and high availability, and various smart cellulose-based hydrogels as targeted carriers under exogenous such as light, electric field, and magnetic field or endogenous such as pH, temperature, ionic strength, and redox gradients. In this review, we summarized the main synthetic strategies of smart cellulose-based hydrogels including physical and chemical cross-linking, and illustrated the detailed intelligent-responsive mechanism of hydrogels in DDS under external stimulus. Additionally, the ongoing development and challenges of cellulose-based hydrogels in the biomedical field are also presented.

A double-network porous hydrogel based on high internal phase emulsions as a vehicle for potassium sucrose octasulfate delivery accelerates diabetic wound healing

Diabetic wounds are a difficult medical challenge. Excessive secretion of matrix metalloproteinase-9 (MMP-9) in diabetic wounds further degrades the extracellular matrix and growth factors and causes severe vascular damage, which seriously hinders diabetic wound healing. To solve these issues, a double-network porous hydrogel composed of poly (methyl methacrylate-co-acrylamide) (p(MMA-co-AM)) and polyvinyl alcohol (PVA) was constructed by the high internal phase emulsion (HIPE) technique for the delivery of potassium sucrose octasulfate (PSO), a drug that can inhibit MMPs, increase angiogenesis and improve microcirculation. The hydrogel possessed a typical polyHIPE hierarchical microstructure with interconnected porous morphologies, high porosity, high specific surface area, excellent mechanical properties and suitable swelling properties. Meanwhile, the p(MMA-co-AM)/PVA@PSO hydrogel showed high drug-loading performance and effective PSO release. In addition, both in vitro and in vivo studies showed that the p(MMA-co-AM)/PVA@PSO hydrogel had good biocompatibility and significantly accelerated diabetic wound healing by inhibiting excessive MMP-9 in diabetic wounds, increasing growth factor secretion, improving vascularization, increasing collagen deposition and promoting re-epithelialization. Therefore, this study provided a reliable therapeutic strategy for diabetic wound healing, some theoretical basis and new insights for the rational design and preparation of wound hydrogel dressings with high porosity, high drug-loading performance and excellent mechanical properties.

Bifunctional lignocellulose nanofiber hydrogel possessing intriguing pH-responsiveness and self-healing capability towards wound healing applications

Lignocellulose nanofibers (LCNF) obtained from agricultural waste are potential candidates for enhancing composite materials because of their excellent mechanical properties, abundant groups and high biocompatibility. However, the application of LCNF has received limited attention to date from researchers in the healthcare field. Herein, based on the bifunctional group (carboxyl and aldehyde groups) modified LCNF (DCLCNF) and chitosan (CS), we developed a multifunctional bio-based hydrogel (CS-DCLCNF). The addition of lignin-containing DCLCNF strengthened the internal crosslinking and the intermolecular interaction of hydrogels, and the presence of lignin and carboxyl groups increased the mechanical strength of the hydrogel and the adsorption of aromatic drugs. Results revealed that the hydrogels exhibited self-healing, injectable, and high swelling rates. The hydrogels had favorable mechanical strength (G'max of ~16.60 kPa), and the maximum compressive stress was 24 kPa. Moreover, the entire tetracycline hydrochloride (TH) release process was slow and pH-responsive, because of the rich noncovalent and π-π interactions between DCLCNF and TH. The hydrogels also exhibited excellent biocompatibility and antibacterial properties. Notably, the wound healing experiment showed that the hydrogels were beneficial in accelerating wounds healing, which could heal completely in 13 days. Therefore, CS-DCLCNF hydrogels may have promising applications in drug delivery for wound healing.

Recent advances in TEMPO-oxidized cellulose nanofibers: Oxidation mechanism, characterization, properties and applications

Cellulose is the richest renewable polymer source on the earth. TEMPO-mediated oxidized cellulose nanofibers are deduced from enormously available wood biomass and functionalized with carboxyl groups. The preparation procedure of TOCNFs is more environmentally friendly compared to other cellulose, for example, MFC and CNCs. Due to the presence of functional carboxyl groups, TOCNF-based materials have been studied widely in different fields, including biomedicine, wastewater treatment, bioelectronics and others. In this review, the TEMPO oxidation mechanism, the properties and applications of TOCNFs are elaborated. Most importantly, the recent advanced applications and the beneficial role of TOCNFs in the various abovementioned fields are discussed. Furthermore, the performances and research progress on the fabrication of TOCNFs are summarized. It is expected that this timely review will help further research on the invention of novel material from TOCNFs and its applications in different advanced fields, including biomedicine, bioelectronics, wastewater treatment, and the energy sector.

An antibacterial and anti-oxidant hydrogel containing hyperbranched poly-l-lysine and tea polyphenols accelerates healing of infected wound

Both bacteria-infection and excessive inflammation delay the wound healing process and even create non-healing wound, thus it is highly desirable to endow the wound dressing with bactericidal and anti-oxidation properties. Herein an antibacterial and antioxidation hydrogel based on Carbomer 940 (CBM) and hydroxypropyl methyl cellulose (HPMC) loaded with tea polyphenols (TP) and hyperbranched poly-l-lysine (HBPL) was designed and fabricated. The hydrogel killed 99.9 % of methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli) at 107 CFU mL-1, and showed strong antioxidation against H2O2 and 2,2-di(4-tert-octylphenyl)-1-picryl-hydrazyl (DPPH) radicals without noticeable cytotoxicity in vitro. The CBM/HPMC/HBPL/TP hydrogel significantly shortened the inflammatory period of the MRSA-infected full-thickness skin wound of rats in vivo, with 2 orders of lower MRSA colonies compared with the blank control, and promoted the wound closure especially at the earlier stage. The inflammation was suppressed and the vascularization was promoted significantly as well, resulting in reduced pro-inflammatory factors including interleukin-6 (IL-6), interleukin-1β (IL-1β) and tumor necrosis factor-α (TNF-α), and increased anti-inflammatory factors such as interleukin-4 (IL-4) and interleukin-10 (IL-10).

Bioinspired Zn-MOF doped radial porous chitosan-based sponge with antibacterial and antioxidant properties for rapid hemostasis and wound healing

Herein, a novel bioinspired radial porous zinc-based metal-organic framework (Zn-MOF) doped sodium alginate/chitosan derivatives/pullulan-based SA/PSCS/Pul/Zn-MOF (SPCP/Zn) composites sponge with excellent antioxidant and antibacterial properties was fabricated by the ice-templating method. Boric acid (BA) and Ca2+, which were respectively used as hydrogen- and ionic- bonding cross-linkers, provided strong mechanical properties for sponge matrix composed of SA, PSCS, and Pul. The obtained SPCP/Zn sponge exhibited uniform porous morphology, proper hydrophilicity, and admirable biocompatibility. In addition, the SPCP/Zn sponge achieved a sustained release of Zn2+ and gallic acid, which displayed powerful antibacterial and antioxidant activities. Importantly, the SPCP/Zn sponge exhibited shorter rapid hemostasis (20.4 ± 2.9 s) and lower blood loss (19.8 ± 4.3 mg). The SPCP/Zn sponge also showed faster wound closure ratio for the rat full-thickness skin defect model. It was revealed that SPCP/Zn sponge could significantly accelerate and enhance wound healing through downregulating inflammatory cytokines (TNF-α, IL-6) and increasing the expression of growth factors (VEGF). Due to its excellent properties, the SPCP/Zn sponge may have promising potential in wound healing applications.

Nanocellulose, the Green Biopolymer Trending in Pharmaceuticals: A Patent Review

The use of nanocellulose in pharmaceutics is a trend that has emerged in recent years. Its inherently good mechanical properties, compared to different materials, such as its high tensile strength, high elastic modulus and high porosity, as well as its renewability and biodegradability are driving nanocellulose's industrial use and innovations. In this sense, this study aims to conduct a search of patents from 2011 to 2023, involving applications of nanocellulose in pharmaceuticals. A patent search was carried out, employing three different patent databases: Patentscope from World Intellectual Property Organization (WIPO); Espacenet; and LENS.ORG. Patents were separated into two main groups, (i) nanocellulose (NC) comprising all its variations and (ii) bacterial nanocellulose (BNC), and classified into five major areas, according to their application. A total of 215 documents was retrieved, of which 179 were referred to the NC group and 36 to the BNC group. The NC group depicted 49.7%, 15.6%, 16.2%, 8.9% and 9.5% of patents as belonging to design and manufacturing, cell culture systems, drug delivery, wound healing and tissue engineering clusters, respectively. The BNC group classified 44.5% of patents as design and manufacturing and 30.6% as drug delivery, as well as 5.6% and 19.4% of patents as wound healing and tissue engineering, respectively. In conclusion, this work compiled and classified patents addressing exclusively the use of nanocellulose in pharmaceuticals, providing information on its current status and trending advancements, considering environmental responsibility and sustainability in materials and products development for a greener upcoming future.

Novel Injectable, Self-Healing, Long-Effective Bacteriostatic, and Healed-Promoting Hydrogel Wound Dressing and Controlled Drug Delivery Mechanisms

Multivalent ion cross-linking has been used to form hydrogels between sodium alginate (SA) and hyaluronic acid (HA) in previous studies. However, more stable and robust covalent cross-linking is rarely reported. Herein, we present a facile approach to fabricate a SA and HA hydrogel for wound dressings with injectable, good biocompatibility, and high ductility. HA was first reacted with ethylenediamine to graft an amino group. Then, it was cross-linked with oxidized SA with dialdehyde to form hydrogel networks. The dressing can effectively promote cell migration and wound healing. To increase the antibacterial property of the dressing, we successfully loaded tetracycline hydrochloride into the hydrogel as a model drug. The drug can be released slowly in the alkaline environment of chronic wounds, and the hydrogel releases drugs again in the more acidic environment with wound healing, achieving a long-term antibacterial effect. In addition, one-dimensional partial differential equations based on Fickian diffusion with time-varying diffusion coefficients and hydrogel thicknesses were used to model the entire complex drug release process and to predict drug release.

Progress in injectable hydrogels for the treatment of incompressible bleeding: an update

Uncontrollable haemorrhage from deep, noncompressible wounds remains a persistent and intractable challenge, accounting for a very high proportion of deaths in both war and disaster situations. Recently, injectable hydrogels have been increasingly studied as potential haemostatic materials, highlighting their enormous potential for the management of noncompressible haemorrhages. In this review, we summarize haemostatic mechanisms, commonly used clinical haemostatic methods, and the research progress on injectable haemostatic hydrogels. We emphasize the current status of injectable hydrogels as haemostatic materials, including their physical and chemical properties, design strategy, haemostatic mechanisms, and application in various types of wounds. We discuss the advantages and disadvantages of injectable hydrogels as haemostatic materials, as well as the opportunities and challenges involved. Finally, we propose cutting-edge research avenues to address these challenges and opportunities, including the combination of injectable hydrogels with advanced materials and innovative strategies to increase their biocompatibility and tune their degradation profile. Surface modifications for promoting cell adhesion and proliferation, as well as the delivery of growth factors or other biologics for optimal wound healing, are also suggested. We believe that this paper will inform researchers about the current status of the use of injectable haemostatic hydrogels for noncompressible haemorrhage and spark new ideas for those striving to propel this field forward.

Metal-organic gels: recent advances in their classification, characterization, and application in the pharmaceutical field

Metal-organic gels (MOGs) are a type of functional soft substance with a three-dimensional (3D) network structure and solid-like rheological behavior, which are constructed by metal ions and bridging ligands formed under the driving force of coordination interactions or other non-covalent interactions. As the homologous substances of metal-organic frameworks (MOFs) and gels, they exhibit the potential advantages of high porosity, flexible structure, and adjustable mechanical properties, causing them to attract extensive research interest in the pharmaceutical field. For instance, MOGs are often used as excellent vehicles for intelligent drug delivery and programmable drug release to improve the clinical curative effect with reduced side effects. Also, MOGs are often applied as advanced biomedical materials for the repair and treatment of pathological tissue and sensitive detection of drugs or other molecules. However, despite the vigorous research on MOGs in recent years, there is no systematic summary of their applications in the pharmaceutical field to date. The present review systematically summarize the recent research progress on MOGs in the pharmaceutical field, including drug delivery systems, drug detection, pharmaceutical materials, and disease therapies. In addition, the formation principles and classification of MOGs are complemented and refined, and the techniques for the characterization of the structures/properties of MOGs are overviewed in this review.

Current advances of nanocellulose application in biomedical field

Nanocellulose (NC) is a natural fiber that can be extracted in fibrils or crystals form from different natural sources, including plants, bacteria, and algae. In recent years, nanocellulose has emerged as a sustainable biomaterial for various medicinal applications including drug delivery systems, wound healing, tissue engineering, and antimicrobial treatment due to its biocompatibility, low cytotoxicity, and exceptional water holding capacity for cell immobilization. Many antimicrobial products can be produced due to the chemical functionality of nanocellulose, such disposable antibacterial smart masks for healthcare use. This article discusses comprehensively three types of nanocellulose: cellulose nanocrystals (CNC), cellulose nanofibrils (CNF), and bacterial nanocellulose (BNC) in view of their structural and functional properties, extraction methods, and the distinctive biomedical applications based on the recently published work. On top of that, the biosafety profile and the future perspectives of nanocellulose-based biomaterials have been further discussed in this review.

Multifunctional Double-Layer and Dual Drug-Loaded Microneedle Patch Promotes Diabetic Wound Healing

Chronic nonhealing diabetic wounds are a serious complication of diabetes, with a high morbidity rate that can cause disability or death. The long period of inflammation and dysfunctional angiogenesis are the main reasons for wound-healing difficulty in diabetes. In this study, a multifunctional double-layer microneedle (DMN) is constructed to control infection and promote angiogenesis, meeting the multiple demands of the healing process of a diabetic wound. The double-layer microneedle is consisted in a hyaluronic acid substrate and a mixture of carboxymethyl chitosan and gelatin as the tip. The antibacterial drug tetracycline hydrochloride (TH) is loaded into the substrate of the microneedle to achieve rapid sterilization and promote resistance to external bacterial infections. The microneedle tip loaded with recombinant human epidermal growth factor (rh-EGF) is inserted into the skin, in response to gelatinase produced by resident microbe and disassociate to achieve the enzymatic response release. The double-layer drug-loaded microneedles (DMN@TH/rh-EGF) have antibacterial and antioxidant effects, and promote cell migration and angiogenesis in vitro. In an in vivo diabetic wound model, using rats, the DMN@TH/rh-EGF patch is able to inhibit inflammation, promote angiogenesis, collagen deposition, and tissue regeneration during the wound healing process, promoting its healing.

Surface-Modified Carboxylated Cellulose Nanofiber Hydrogels for Prolonged Release of Polyhexamethylene Biguanide Hydrochloride (PHMB) for Antimicrobial Applications

The surface modification of cellulose nanofibers (CNFs) using a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)/sodium bromide (NaBr)/sodium hypochlorite (NaClO) system was successful in improving their hydrophilicity. Following that, we fabricated hydrogels containing carboxylated cellulose nanofibers (c-CNFs) and loaded them with polyhexamethylene biguanide (PHMB) using a physical crosslinking method, aiming for efficient antimicrobial uses. The morphological and physicochemical properties of all hydrogel formulations were characterized, and the results revealed that the 7% c-CNFs-2 h loaded with PHMB formulation exhibited desirable characteristics such as regular shape, high porosity, good mechanical properties, suitable gel content, and a good maximum swelling degree. The successful integration of PHMB into the c-CNF matrix was confirmed by FTIR analysis. Furthermore, the 7% c-CNFs-2 h loaded with the PHMB formulation demonstrated PHMB contents exceeding 80% and exhibited a prolonged drug release pattern for up to 3 days. Moreover, this formulation displayed antibacterial activity against S. aureus and P. aeruginosa. In conclusion, the novel approach of c-CNF hydrogels loaded with PHMB through physical crosslinking shows promise as a potential system for prolonged drug release in topical drug delivery while also exhibiting excellent antibacterial activity.

Carboxylated nanocellulose for wound healing applications - Increase of washing efficiency after chemical pre-treatment and stability of homogenized gels over 10 months

To commercialize a biomedical product as a medical device, reproducibility of production and time-stability are important parameters. Studies of reproducibility are lacking in the literature. Additionally, chemical pre-treatments of wood fibres to produce highly fibrillated cellulose nanofibrils (CNF) seem to be demanding in terms of production efficiency, being a bottleneck for industrial upscaling. In this study, we evaluated the effect of pH on the dewatering time and washing steps of 2,2,6,6-Tetramethylpiperidinyloxy (TEMPO)-mediated oxidized wood fibres when applying 3.8 mmol NaClO/g cellulose. The results indicate that the method does not affect the carboxylation of the nanocelluloses, and levels of approximately 1390 μmol/g were obtained with good reproducibility. The washing time of a Low-pH sample was reduced to 1/5 of the time required for washing a Control sample. Additionally, the stability of the CNF samples was assessed over 10 months and changes were quantified, the most pronounced were the increase of potential residual fibre aggregates, reduction of viscosity and increase of carboxylic acid content. The cytotoxicity and skin irritation potential were not affected by the detected differences between the Control and Low-pH samples. Importantly, the antibacterial effect of the carboxylated CNFs against S. aureus and P. aeruginosa was confirmed.

Homogeneous silver nanoparticle loaded polydopamine/polyethyleneimine-coated bacterial cellulose nanofibers for wound dressing

Utilizing mussel-inspired chemistry is an advanced strategy for surface modification, because dopamine (DA) can form a material-independent adhesive coating and further functionalization can be achieved, including the production of silver nanoparticles (AgNPs). Nevertheless, DA easily aggregates in the nanofiber network structure of bacterial cellulose (BC), which not only blocks the pores in the BC structure but also leads to the formation of large silver particles and the burst release of highly cytotoxic silver ions. Herein, a homogeneous AgNP-loaded polydopamine (PDA)/polyethyleneimine (PEI) coated BC was constructed via a Michael reaction between PDA and PEI. Under the action of PEI, the PDA/PEI coating was uniformly attached to the BC fiber surface with a thickness of approximately 4 nm, and homogeneous AgNPs were produced on the uniform PDA/PEI/BC (PPBC) fiber surface. The sustained release of silver ions was better from AgNPs@PPBC than from AgNPs@PDA/BC. The obtained AgNPs@PPBC exhibited excellent antibacterial activities and cytocompatibility. The results of the in vivo assay indicated that the AgNPs@PPBC dressing could inhibit S. aureus infection and inflammation, promote hair follicle growth, enhance collagen deposition, and accelerate wound healing within 12 days compared with BC. These results illustrate that the homogeneous AgNPs@PPBC dressing has great potential for treating infected wounds.

Biodegradable Gg-cl-poly(NIPAm-co-AA)/-o-MWCNT based hydrogel for combined drug delivery system of metformin and sodium diclofenac: in vitro studies

In the present study Gg-cl-poly(NIPA-co-AA) and Gg-cl-poly(NIPA-co-AA)/-o-MWCNT hydrogels were synthesized using free radical polymerization. We looked into whether combining metformin with diclofenac, a nonsteroidal anti-inflammatory drug (NSAID), would be effective in examining complex formation and analysing the types and intensities of complexes that could result from metformin-diclofenac interactions. The interaction of metformin and diclofenac was studied in vitro at various pH levels and body temperatures. The structure and morphology of the produced hydrogel were characterised using FTIR spectra, SEM analysis, and drug loading tests. As a model drug, the hydrogel was loaded with metformin hydrochloride and sodium diclofenac (DS), and the medicines were released pH-dependently. To explore the drug release kinetics and mechanism, the zero order and first order kinetic models, the Korsemeyar-Peppas model, the Higuchi model, and the Hixson-Crowell model have all been employed. Drug release studies revealed notable characteristics in connection to physiologically predicted pH values, with a high release rate at pH = 9.2. At pH = 9.2, however, both metformin and sodium diclofenac exhibited a Fickian mechanism. Combination treatment may reduce the effective dose of a single drug and hinder metabolic rescue mechanisms. More study is needed to detect any negative effects on individuals.

Poly-Catecholic Functionalization of Biomolecules for Rapid Gelation, Robust Injectable Bioadhesion, and Near-Infrared Responsiveness

Mussel-inspired catechol-functionalization of degradable natural biomaterials has garnered significant interest as an approach to achieve bioadhesion for sutureless wound closure. However, conjugation capacity in standard coupling reactions, such as carbodiimide chemistry, is limited by low yield and lack of abundant conjugation sites. Here, a simple oxidative polymerization step before conjugation of catechol-carrying molecules (i.e., 3,4-dihydroxy-l-phenylalanine, l-DOPA) as a potential approach to amplify catechol function in bioadhesion of natural gelatin biomaterials is proposed. Solutions of gelatin modified with poly(l-DOPA) moieties (GelDOPA) are characterized by faster physical gelation and increased viscosity, providing better wound control on double-curved tissue surfaces compared to those of l-DOPA-conjugated gelatin. Physical hydrogels treated topically with low concentrations of NaIO4 solutions are crosslinked on-demand via through-thickness diffusion. Poly(l-DOPA) conjugates enhance crosslinking density compared to l-DOPA conjugated gelatin, resulting in lower swelling and enhanced cohesion in physiological conditions. Together with cohesion, more robust bioadhesion at body temperature is achieved by poly(l-DOPA) conjugates, exceeding those of commercial sealants. Further, poly(l-DOPA) motifs introduced photothermal responsiveness via near-infrared (NIR) irradiation for controlled drug release and potential applications in photothermal therapy. The above functionalities, along with antibacterial activity, render the proposed approach an effective biomaterial design strategy for wound closure applications.

Cellulose Hydrogel with Hyaluronic Acid and Silver Nanoparticles: Sustained-Release Formulation with Antibacterial Properties against Pseudomonas aeruginosa

Pathogenic bacteria resistant to conventional antibiotics represent a global challenge and justify the need for new antimicrobials capable of combating bacterial multidrug resistance. This study describes the development of a topical hydrogel in a formulation composed of cellulose, hyaluronic acid (HA), and silver nanoparticles (AgNPs) against strains of Pseudomonas aeruginosa. AgNPs as an antimicrobial agent were synthesized by a new method based on green chemistry, using arginine as a reducing agent and potassium hydroxide as a carrier. Scanning electron microscopy showed the formation of a composite between cellulose and HA in a three-dimensional network of cellulose fibrils, with thickening of the fibrils and filling of spaces by HA with the presence of pores. Ultraviolet-visible spectroscopy (UV-vis) and particle size distribution for dynamic light scattering (DLS) confirmed the formation of AgNPs with peak absorption at ~430 nm and 57.88 nm. AgNPs dispersion showed a minimum inhibitory concentration (MIC) of 1.5 µg/mL. The time-kill assay showed that after 3 h of exposure to the hydrogel containing AgNPs, there were no viable cells, corresponding to a bactericidal efficacy of 99.999% in the 95% confidence level. We obtained a hydrogel that is easy to apply, with sustained release and bactericidal properties against strains of Pseudomonas aeruginosa at low concentrations of the agent.

Hydrogel transformed from sandcastle-worm-inspired powder for adhering wet adipose surfaces

Normally, hydrogel adhesives do not perform well on adipose matters that are covered with bodily fluids. Besides, the maintenance of high extensibility and self-healing ability in fully swollen state still remains challenging. Based on these concerns, we reported a sandcastle-worm-inspired powder, which was made of tannic acid-functionalized cellulose nanofiber (TA-CNF), polyacrylic acid (PAA) and polyethyleneimine (PEI). The obtained powder can rapidly absorb diverse bodily fluids and transform into a hydrogel, displaying fast (＜3 s), self-strengthening and repeatable wet adhesion to adipose tissues. Due to the dense physically cross-linked network, the formed hydrogel still showed excellent extensibility (∼14 times) and self-healing ability after being immersed in water. Moreover, excellent hemostasis, antibacterial ability and biocompatibility make it suitable for numerous biomedical applications. With combined advantages of powders and hydrogels, such as good adaptability to irregular sites, efficient drug loading capacity and tissue affinity, the sandcastle-worm-inspired powder offers significant promise as tissue adhesive and repair materials. This work may open new avenues for designing high-performance bioadhesives with efficient and robust wet adhesiveness to adipose tissues.

Chitosan-based multifunctional hydrogel for sequential wound inflammation elimination, infection inhibition, and wound healing

In this study, a composite hydrogel (QMPD hydrogel) composed of methacrylate anhydride (MA) grafted quaternary ammonium chitosan (QCS-MA), polyvinylpyrrolidone (PVP), and dopamine (DA) was designed for the sequential wound inflammation elimination, infection inhibition, and wound healing. The QMPD hydrogel formation was initiated by the ultraviolet light-triggered polymerization of QCS-MA. Furthermore, hydrogen bonds, electrostatic interactions, and "π-π" stacking between QCS-MA, PVP, and DA were involved in the hydrogel formation. In this hydrogel, the quaternary ammonium groups of quaternary ammonium chitosan and the photothermal conversion of polydopamine are capable of killing bacteria on wounds, which showed the bacteriostatic ratios of 85.6 % and 92.5 % toward Escherichia coli and Staphylococcus aureus, respectively. Moreover, the oxidation of DA sufficiently scavenged free radicals and introduced the QMPD hydrogel with good anti-oxidant and anti-inflammatory abilities. Together with the extracellular matrix-mimic tropical structure, the QMPD hydrogel significantly promoted the wound management of mice. Therefore, the QMPD hydrogel is expected to provide a new method for the design of wound healing dressings.

Optimizing chemistry at the surface of prodrug-loaded cellulose nanofibrils with MAS-DNP

Studying the surface chemistry of functionalized cellulose nanofibrils at atomic scale is an ongoing challenge, mainly because FT-IR, NMR, XPS and RAMAN spectroscopy are limited in sensitivity or resolution. Herein, we show that dynamic nuclear polarization (DNP) enhanced ¹³C and ¹⁵N solid-state NMR is a uniquely suited technique to optimize the drug loading on nanocellulose using aqueous heterogenous chemistry. We compare the efficiency of two conventional coupling agents (DMTMM vs EDC/NHS) to bind a complex prodrug of ciprofloxacin designed for controlled drug release. Besides quantifying the drug grafting, we also evidence the challenge to control the concurrent prodrug adsorption and to optimize washing procedures. We notably highlight the presence of an unexpected prodrug cleavage mechanism triggered by carboxylates at the surface of the cellulose nanofibrils.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

Pterostilbene loaded poly(vinyl alcohol)-gelatin cryogels as potential bioactive wound dressing material

Cryogels are support materials which are good at mimicking extracellular matrix due to their excellent hydrophilicity, biocompatibility, and macroporous structure, thus they are useful in facilitating cell activities during healing process. In this study, polyvinyl alcohol-gelatin (PVA-Gel) based cryogel membranes loaded with pterostilbene (trans-3,5-dimethoxy-4-hydroxystilbene; PTS) (PVA-Gel/PTS) was synthesized as wound dressing materials. PVA-Gel and PVA-Gel/PTS were synthesized with the polymerization yields of 96% ± 0.23% and 98% ± 0.18%, respectively, and characterized by swelling tests, Brunauer-Emmett-Teller (BET) and scanning electron microscopy (SEM) analysis. The swelling ratios were calculated as 98.6% ± 4.93% and 102% ± 5.1%, macroporosities were determined as 85% ± 2.13% and 88% ± 2.2%, for PVA-Gel and PVA-Gel/PTS, respectively. It was determined that PVA-Gel and PVA-Gel/PTS have 17 m² /g ± 0.76 m² /g and 20 m² /g ± 0.92 m² /g surface areas, respectively. SEM studies were demonstrated that they have ~100 μm pore sizes. According to 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), trypan blue exclusion and live-dead assay results, it was observed that cell proliferation, cell number and cell viability were higher in PVA-Gel/PTS cryogel at 24, 48, and 72 h compared to PVA-Gel. A strong and transparent fluorescent light intensity was observed indicating higher cell population in PVA-Gel/PTS in comparison with PVA-Gel, according to 4',6-diamidino-2-phenylindole (DAPI) staining. SEM, F-Actin, Giemsa staining and inverted-phase microscope image of fibroblasts in PVA-Gel/PTS cryogels revealed that dense fibroblast proliferation and spindle-shaped morphology of cells were preserved. Moreover, DNA agarose gel data demonstrated that PVA-Gel/PTS cryogels had no effect on DNA integrity. Consequently, produced PVA-Gel/PTS cryogel can be used as wound dressing material to promote wound therapies, inducing cell viability and proliferation.

Polysaccharide-based biopolymer hydrogels for heavy metal detection and adsorption

BACKGROUND

With rapid development in agriculture and industry, water polluted with heavy metallic ions has come to be a serious problem. Adsorption-based methods are simple, efficient, and broadly used to eliminate heavy metals. Conventional adsorption materials have the problems of secondary environmental contamination. Hydrogels are considered effective adsorbents, and those prepared from biopolymers are biocompatible, biodegradable, non-toxic, safe to handle, and increasingly used to adsorb heavy metal ions.

AIM OF REVIEW

The natural origin and easy degradability of biopolymer hydrogels make them potential for development in environmental remediation. Its water absorption capacity enables it to efficiently adsorb various pollutants in the aqueous environment, and its internal pore channels increase the specific surface area for adsorption, which can provide abundant active binding sites for heavy metal ions through chemical modification.

KEY SCIENTIFIC CONCEPT OF REVIEW

As the most representative of biopolymer hydrogels, polysaccharide-based hydrogels are diverse, physically and chemically stable, and can undergo complex chemical modifications to enhance their performance, thus exhibiting superior ability to remove contaminants. This review summarizes the preparation methods of hydrogels, followed by a discussion of the main categories and applications of polysaccharide-based biopolymer hydrogels.

Carboxymethyl chitosan/sodium alginate hydrogels with polydopamine coatings as promising dressings for eliminating biofilm and multidrug-resistant bacteria induced wound healing

Microorganisms induced wound infection and the accompanying excessive inflammatory response is the daunting problems in wound treatment. Due to the lack of corresponding biological functions, traditional wound dressings cannot effectively protect the wound and are prone to induce local infection, excessive inflammation, and vascular damage, resulting in prolonged unhealing. Here, a mussel-inspired strategy was adopted to prepare a multifunctional hydrogel created by H₂O₂/CuSO₄-induced rapid polydopamine (PDA) deposition on carboxymethyl chitosan (CMC)/sodium alginate (Alg) based hydrogel, termed as CAC/PDA/Cu(H₂O₂). The prepared CAC/PDA/Cu(H₂O₂) hydrogel features excellent biocompatibility, adequate mechanical properties, and good degradability. Moreover, the CAC/PDA/Cu(H₂O₂) hydrogel can not only realize antibacterial, and anti-inflammatory effects, but also promote angiogenesis to accelerate wound healing in vitro thanks to the composite PDA/Cu(H₂O₂) coatings. Significantly, CAC/PDA/Cu(H₂O₂) hydrogel illustrates excellent therapeutic effects in Methicillin-resistant Staphylococcus aureus (MRSA) induced-rat infection models, which can efficiently eliminate MRSA, dramatically reduce inflammatory expression, promote angiogenesis, and ultimately shorten the wound healing time. CAC/PDA/Cu(H₂O₂) hydrogel exhibited the best wound healing rate on days 7 (80.63 ± 2.44 %), 11 (92.45 ± 2.26 %), and 14 (97.86 ± 0.66 %). Thus, the multifunctional hydrogel provides a facile and efficient approach to wound management and represents promising potential in the therapy for wound healing.

Core-Shell Filament with Excellent Wound Healing Property Made of Cellulose Nanofibrils and Guar Gum via Interfacial Polyelectrolyte Complexation Spinning

Natural polymer-based sutures have attractive cytocompatibility and degradability in surgical operations. Herein, anionic cellulose nanofibrils (ACNF) and cationic guar gum (CGG) are employed to produce nontoxic CGG/ACNF composite filament with a unique core-shell structure via interfacial polyelectrolyte complexation (IPC) spinning. The comprehensive characterization and application performance of the resultant CGG/ACNF filament as a surgical suture are thoroughly investigated in comparison with silk and PGLA (90% glycolide and 10% l-lactide) sutures in vitro and in vivo, respectively. Results show that the CGG/ACNF filament with the typical core-shell structure and nervation pattern surface exhibits a high orientation index (0.74) and good mechanical properties. The tensile strength and knotting strength of CGG/ACNF suture prepared by twisting CGG/ACNF filaments increase by 69.5%, and CGG/ACNF suture has a similar friction coefficient to silk and PGLA sutures. Moreover, CGG/ACNF suture with antibiosis and cytocompatibility exhibits better growth promotion of cells than silk suture, similar to PGLA suture in vitro. In addition, the stitching experiment of mice with the CGG/ACNF suture further confirms better healing properties and less inflammation in vivo than silk and PGLA sutures do. Hence, the CGG/ACNF suture with a simple preparation method and excellent application properties is promising in surgical operations.

Intelligent temperature-pH dual responsive nanocellulose hydrogels and the application of drug release towards 5-fluorouracil

As the typical bio-macromolecules, cellulose and its derivates are widely studied due to the fact that they are green and renewable resources in nature. In this work, intelligent temperature-pH sensitive nanohydrogels consisting of nanocellulose, thermal responsive monomer (N-isopropylacrylamide, NIPAM), and pH responsive monomer (acrylic acid, AA; acrylamide, AM) were prepared [NFC-g-(AA/AM)]-g-NIPAM, the [NFC-g-(AA/AM)]-g-NIPAM was characterized by FTIR, scanning electron microscope (SEM), thermogravimetric analysis (TGA) and automatic gas adsorption analysis (BET). The results showed that the copolymerization of AA, AM and NIPAM were carried out successfully. The specific surface area, total pore volume, average pore diameter and thermal stability of the modified nano-cellulose were increased. In addition, the as-prepared nanohydrogels with 5-fluorouracil (5-FU) released more 5-FU at 40 °C and acidic condition compared to the room temperature and neutral pH, showing the characteristics of the temperature-PH dual response functionalization. The [NFC-g-(AA/AM)]-g-NIPAM have been proved to be the promising drug release nanohydrogels towards 5-FU, and the valuable findings might provide an idea for maximizing the potential of the nanocellulose-based nanohydrogels for the application of environmental pollution control.