Research advances in chemical modifications of starch for hydrophobicity and its applications: A review

Mechanistic applications of low-temperature plasma in starch-based biopolymer film: A review

The substitution of traditional packaging with bio-based edible films has emerged as a new research direction. The starch biopolymer films currently studied by researchers exhibit issues such as inadequate physical properties, barrier performance, mechanical strength, and biological activity. Consequently, a range of advanced techniques are employed to enhance the properties of biopolymer films. Low-temperature plasma stands out as an emerging multi-functional non-thermal green molecular surface modification technology that has been particularly effective in enhancing starch biopolymer films. Furthermore, owing to its non-thermal characteristics, low-temperature plasma is particularly suitable for heat-sensitive materials. Consequently, this study aims to investigate the impact of low-temperature plasma technology on enhancing the properties of biopolymer film substrates, elucidate its mechanisms of action on starch films and starch composite films, refine methods for modifying biopolymer films, and conduct a rational analysis of any contradictions.

pH-responsive starch-based bilayer film functionalized with alliin loaded MIL-101 (Fe) for active food packaging

Food packaging films containing antimicrobial reagents play a crucial role in preventing bacterial-induced fruit decay. This study proposes a bilayer film consisting of an internal amino-modified starch hydrophilic layer and an external amino-modified polyvinyl alcohol/polylactic acid hydrophobic layer, embedding alliin@MIL-101(Fe) as an antibacterial agent, utilizing the pH reduction of fruit decay sites to achieve pH-responsive release, enhancing antibacterial performance. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) analyses confirm successful crosslinking between amino and aldehyde groups, resulting in the formation of imine bonds and a mesh-like structure conducive to adsorption. Under acidic conditions, the cumulative release rate of alliin reached 74 % within 36 h. Compared to a simple mixture, the tensile strength of the alliin@MIL/NST-NPVA/PLA film reached 34.771 MPa, and transmittance in the wavelength range of 200-370 nm decreased to 0. The scavenging rate of DPPH free radicals in the film can reach 83 %. In addition, the water vapor permeability and oxygen permeability of the film are approximately 7.62 × 10-16 [g/ (m2‧24 h‧0.1 mm)] and 6.83 (m2‧24 h‧0.1 MPa), respectively; moisture content and water solubility decreased to 10.99 % and 20.77 %. This composite film extended the shelf life of strawberries from 2 to 7 days, significantly enhancing freshness.

Dual modification of sweet potato starch: Effects of sequence based on ultrasound-assisted nanoprecipitation and OSA esterification for superior functional properties

This study innovatively combined ultrasound-assisted nanoprecipitation with octenyl succinic anhydride (OSA) esterification for dual modification of sweet potato starch (SPS), systematically investigating the impact of modification sequence (nanoprecipitation-first vs. OSA-first) on functional properties. The results showed that OSA-modified nano precipitated SPS (OSA nano SPS) achieved a 10.8 % higher degree of substitution (DS: 0.0184) than nano precipitated OSA-modified SPS (nano OSA SPS, DS: 0.0166), attributed to enhanced OSA accessibility via prior nano structuring. Ultrasonication reduced starch particle size to 77.01 nm and increased amylose content (244.23 mg/g), resulting the increased solubility and the decreased swelling capacity. OSA esterification of SPS was confirmed by FT-IR, with characteristic peaks at 1729 cm-1 (C=O) and 1564 cm-1 (-COONa), improved hydrophobicity (90° contact angle) and formed V-type crystalline structures confirmed by XRD. SEM and TEM analyses conclusively demonstrated that OSA nano SPS exhibited structurally integrated nanoparticles with enhanced surface uniformity and controlled size distribution, while nano OSA SPS displayed irregular aggregates compromising structural integrity. OSA nano SPS exhibited superior Pickering emulsion stability, maintaining over 80 % emulsification index after 120 h, with rheological properties surpassing single-modified counterparts. The work first elucidates the sequence-dependent mechanism of dual modifications, demonstrating that nanoprecipitation before esterification optimizes reaction efficiency and emulsion performance. These findings provide a paradigm for designing starch-based delivery systems through controllable multi-step modification strategies.

Sustainable Synthesis of Multifunctionalized Amoxicillin-Loaded Biopolymer Foams

The development of biocompatible biopolymer foams loaded with antibiotics is crucial to advancing drug delivery systems in biomedical engineering. These materials offer controlled drug release and specialized functionalities for improved therapeutic outcomes. This study presents the development and characterization of antimicrobial polymeric biofoam materials loaded with the drug amoxicillin (AMX). The sustainable synthesis of these biopolymer foams involves a cost-effective, eco-friendly method that incorporates natural starch within poly(vinyl alcohol) (PVA) through an aldehyde cross-linking/stabilizing process. The highly porous structure of the biofoams enabled effective impregnation of the AMX drug using an innovative process involving ultrasonication and vacuum pressure to maximize efficiency and minimize biomaterial loss. The findings demonstrate the potential of these PVA/starch-based biofoams as versatile drug delivery systems with desirable physicochemical and biological characteristics. Detailed investigations were conducted to evaluate morphological features, chemical properties, swelling behavior, in vitro biodegradability, drug release profiles, cell culture, and antimicrobial activity tests of the prepared biofoam samples. Investigating the effect of controlled loading of AMX under laboratory conditions on its release profile and studying its biodegradation in various environments over time represent a critical aspect of this research. The optimal release profile under physiological conditions and the potent inhibition of bacterial growth against Escherichia coli and Staphylococcus aureus microorganisms by AMX-loaded biofoam materials highlight their potential for biomedical applications. These materials show promise for the in vivo administration and local treatment of bacterial infections.

Superheated steam processing as a novel strategy for rapid synthesis of millet-starch citrates: Preparation, characterization, and in vitro starch digestibility

This study investigates the potential of superheated steam (SS) as a rapid and sustainable method for synthesising millet starch citrates with improved physicochemical and functional properties. Millet starch was esterified with citric acid (CA) under varying SS conditions (160-180 °C, 15-45 min) to optimise the degree of substitution (DS) and evaluate its influence on starch functionality. A range of DS values (0.023 to 0.121) were achieved, with the highest DS observed at 170 °C for 45 min. Structural analysis using Fourier-transform infrared spectroscopy confirmed successful esterification, with the appearance of a new peak at 1735 cm-1 indicating ester bond formation. X-ray diffraction showed a reduction in crystallinity with increasing DS, while polarised light microscopy and confocal scanning laser microscopy revealed alterations in molecular organisation. Scanning electron microscopy demonstrated minimal disruption to granule morphology. Contact angle measurements indicated increased hydrophobicity, with water contact angles rising from 29.63° in native starch to 71.63° in high DS samples. Additionally, a significant (p < 0.05) reduction in amylose content and paste viscosities was observed, correlating with improved resistance to gelatinisation and retrogradation. In vitro digestibility analysis showed a substantial increase in resistant starch content, from 18.69 % in native starch to 40.11 % in high DS samples. These findings highlight SS as an efficient and eco-friendly technology for producing starch citrates with tailored functionalities, particularly suited for low-glycaemic response and health-promoting food applications.

Transparent, mechanically robust and antibacterial food packaging film based on starch/PVA/citric acid/carboxycellulose nanofibers by one-pot green process

The development of biodegradable food packaging films is urgent because of the environmental crisis of the "plastic siege", and natural polysaccharide films are promising alternatives due to their eco-friendly attributes. Starch/poly (vinyl alcohol)/citric acid/carboxycellulose nanofibers (SPCC) films were prepared by hydrogen bonding and citric acid esterification cross-linking in a simple and green one-pot method, which avoids the use of plasticizers harmful to human health. Because of the presence of carboxyl groups, the nanofibers are uniformly dispersed. The dual reinforcement of carboxycellulose nanofibers and poly (vinyl alcohol) made the tensile strength of SPCC film up to about 56 MPa, while the commercial Polyethylene (PE) film was only about 35 MPa. Meanwhile, the film had excellent antibacterial activity against Escherichia coli (≥95.5 %) and Staphylococcus aureus (≥96.6 %), water resistance, and gas barrier properties. The transparent SPCC films inhibited the browning of litchis for about 4 days and kept the appearance and physicochemical properties of plums stable for 14 days. In particular, the film was virtually biodegradable in soil after 30 days, which opens up the possibility of replacing non-biodegradable petrochemical packaging films.

Integrating the modified amphiphilic Eleocharis tuberosa starch to stabilize curcuminoid-enriched Pickering emulsions for enhanced bioavailability, thermal stability, and retention of the hydrophobic bioactive compound

The study involves the modification of a non-conventional starch isolated from the under-utilized variety of Chinese water chestnut (CWC (Eleocharis tuberosa) and integrating it to fabricate stabilized and curcumin-enriched Pickering emulsions with enhanced bioavailability, thermal stability, and retention of encapsulated curcumin. A time-efficient, semi-dried esterification method was used to prepare modified amphiphilic starches using 3, 6, or 9 % (w/v) octenyl succinic anhydride (OSA) and characterized through degree of substitution (DS), contact angle, particle size, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and in-vitro digestibility. Moreover, Pickering emulsions were formulated using CWCS-OSA at 3 %, 6 %, or 9 % concentrations to serve as a carrier for curcumin to improve its water solubility and storage stability. The research investigated Pickering emulsions' encapsulation efficiency, curcumin retention, emulsifying properties, micromorphology, temperature stability, and bioaccessibility. Results showed that CWCS-OSA, with an OSA concentration between 3 % and 9 %, exhibited a degree of substitution (DS) ranging from 0.017 to 0.031 and an expansion in contact angle from 68.36o to 85.45o. CWCS-9%OSA showed the highest encapsulation efficiency at 89.4 % and maintained an emulsification index above 80 % during a 10-day storage period. A significantly higher bio-accessibility (41.26 ± 1.34 %) of curcumin in Pickering emulsions stabilized with CWCS-9%OSA than in the bulk oil system (19.53 ± 1.62 %). This study highlights the potential of chemically modified amphiphilic starch from an underutilized variety of CWCS (Eleocharis tuberosa) to produce the stabilized Pickering emulsion gels as a stable and effective carrier for unstable hydrophobic polyphenolic compounds by enhancing their bioavailability in the foods and pharmaceutics.

Polysaccharide Hydrogels as Delivery Platforms for Natural Bioactive Molecules: From Tissue Regeneration to Infection Control

Polysaccharide-based hydrogels have emerged as indispensable materials in tissue engineering and wound healing, offering a unique combination of biocompatibility, biodegradability, and structural versatility. Indeed, their three-dimensional polymeric network and high water content closely resemble the natural extracellular matrix, creating a microenvironment for cell growth, differentiation, and tissue regeneration. Moreover, their intrinsic biodegradability, tunable chemical structure, non-toxicity, and minimal immunogenicity make them optimal candidates for prolonged drug delivery systems. Notwithstanding numerous advantages, these polysaccharide-based hydrogels are confronted with setbacks such as variability in material qualities depending on their source, susceptibility to microbial contamination, unregulated water absorption, inadequate mechanical strength, and unpredictable degradation patterns which limit their efficacy in real-world applications. This review summarizes recent advancements in the application of polysaccharide-based hydrogels, including cellulose, starch, pectin, zein, dextran, pullulan and hyaluronic acid as innovative solutions in wound healing, drug delivery, tissue engineering, and regenerative medicine. Future research should concentrate on optimizing hydrogel formulations to enhance their effectiveness in regenerative medicine and antimicrobial therapy.

Crosslinked lignin starch copolymer as a sustainable and thermally stable drilling fluid controller

Fluid loss is a well-known challenge of drilling operations. In this work, a novel sustainable starch-lignin-based polymer was synthesized for possible use in drilling fluid applications. The X-ray photoelectron spectroscopy (XPS) analysis confirmed that kraft lignin was crosslinked with starch via ether covalent bonds. The X-ray diffraction (XRD) analysis confirmed the loss of crystallinity in starch and emerging of new amorphous structures in crosslinked starch-lignin (CSL) polymers after crosslinking with lignin. The incorporation of lignin and new covalent ether bonds improved the thermal stability of starch. The CSL had a rougher surface morphology, higher hydrophilicity, and significantly higher water absorption than starch. CSL-2, with its higher lignin content, demonstrated higher hydrophilicity, better water absorption capacity, and thermal stability than CSL-1. The rheology analysis of the CSL-2 polymer suggested that crosslinking starch with lignin would increase G' more than G" and reduce tan δ of the polymer solution, resulting in more elastic properties and more stability against the angular frequency. Due to its improved swelling, thermal, and rheological properties as compared to native starch, the produced sustainable lignin-starch copolymer could be used as a new viscosity and rheology modifier, such as a fluid loss controller for oil extraction from wells.

Superabsorbent Polymers: Innovations in Ecology, Environmental, and Diverse Applications

Significant progress has been achieved in the development of superabsorbent polymers (SAPs), focusing on enhancing their performance and expanding their applications. Efforts are particularly directed at increasing water absorbency while promoting environmental sustainability. Biodegradable materials such as starch and potassium humate have been successfully integrated with SAPs for desert greening, improving water retention, salt resistance, and seedling survival. The inclusion of nutrient-rich organic-inorganic composites further enhances the durability, efficiency, and recyclability of SAPs. In drought mitigation, polymeric absorbent resins such as polyacrylamide and starch-grafted acrylates have shown efficacy in ameliorating soil conditions and fostering plant growth. In arid environments, agents enriched with humic acid and bentonite contribute to improved soil aeration and water retention, creating optimal conditions for plant establishment. Additionally, the adoption of innovative waste management solutions has led to the production of amphiphilic SAPs from residual sludge, effectively addressing soil nutrient deficiencies and environmental pollution. In the food industry, SAPs containing protease, tea polyphenols, and chitosan exhibit potential for enhancing the stability and quality of seafood products. These advancements highlight the growing relevance of structural optimization approaches in SAP development across diverse applications and underline the importance of continued innovation in these fields. As novel materials emerge and environmental challenges intensify, the potential applications of SAPs are anticipated to expand significantly.

Potato starch quality in relation to the treatments and long-term storage of tubers

Starch is the most important component of potato tubers, the structure and composition of which play a key role in their utilization as well as processing and storage. Potato seed treatment may play the biggest role in ensuring proper plant growth and development. Isolated starch from tubers of different potato varieties for food processing was evaluated immediately after harvesting and after long-term storage with consideration of different products for potato seed treatment. The quality of starch was evaluated in terms of starch grain size, total starch content, pH, starch stability after freezing, gelatinization temperature as well as phosphorus and amylose content. The varieties differed significantly in starch content and quality. The Beo variety had the highest starch content in dry tuber weight (77.8%) and the best starch quality characteristics (the lowest starch stability after freezing - 18.0% and highest gelatinization temperature - 64.0 ℃ onset and 68.4 ℃ end). Simultaneous treatment of tubers with Supporter and Moncut 460 SC contributed to the highest starch content in tubers (77.6% d. m.) as well as increasing its stability after freezing (20.8%) and decreasing its gelatinization temperatures (61.7 ℃ onset and 66.0 ℃ end). This may be due to the increased proportion of large starch grains and higher amylose and phosphorus content. A slight decrease in starch quality traits was shown after long-term storage of tubers. Maintaining constant conditions during storage along with the applied treatments contributed to this. It is recommended to use products for potato seed treatment in the production technology of potato for consumption and for starch production.

Highly efficient esterification of waxy maize starch in choline chloride/acetic acid acidic deep eutectic solvent system

In this study, to address the issue of solvent selection in the chemical modification of starch, a method was developed for the efficient esterification of waxy maize starch (WMS) using an acidic deep eutectic solvent composed of choline chloride and acetic acid (CCHAc-ADES). The impact of different mass fractions of CCHAc-ADES on the degree of substitution and reaction efficiency of lauric acid starch esters was explored. It was found that under the conditions of 70 wt% CCHAc-ADES, starch esters with the highest degree of substitution of 0.161 were successfully prepared, achieving an esterification efficiency of 79.63 %. 13C and 1H nuclear magnetic resonance spectroscopy, X-ray diffraction and gel permeation chromatography revealed that CCHAc-ADES acted within the surface voids of WMS particles without seriously damaging the WMS structure, making it a favorable solvent for chemical modification of WMS. By monitoring changes in the morphology, relative crystallinity, particle size, and hydrophobicity of esterified WMS in CCHAc-ADES, the formation mechanism of lauric acid starch esters was inferred, primarily related to the competitive hydrogen bonding of CCHAc-ADES with WMS. The method proposed in this study allows for the preparation of long-chain fatty acid starch esters without the use of any additional chemicals or enzymes, offering significant guidance for the application of deep eutectic solvents in green synthesis.

Effect of strengthening agents on properties of dual-modified cassava starch-based degradable films

Insufficient hydrophobicity and mechanical properties pose significant challenges in the development of starch-based degradable films. This study prepared modified (crosslinked, acetylated, and crosslinked & acetylated) cassava starch films, and different concentrations of strengthening agents (polyvinyl alcohol, sodium alginate, gelatin, and hyaluronic acid) were added to produce modified starch composite films. The physical properties, structure characteristics, and degradability of these films were systematically evaluated. The dual-modified (crosslinked & acetylated) starch film exhibited superior hydrophobic properties (contact angle = 90.04°), and the addition of strengthening agents significantly enhanced the tensile strength of the composite films (p < 0.05). Fourier transform infrared spectra confirmed that the strengthening agents interacted with starch through hydrogen bonding. Additionally, the hyaluronic acid-starch composite film exhibited the most rapid degradation in soil (53 % weight loss after 30 days of storage) and achieved the highest comprehensive score for physical properties. This film combined exceptional hydrophobicity and mechanical properties, making it an ideal candidate for food packaging applications. These findings suggest that the hyaluronic acid-starch composite film has broad potential applications in the field of degradable food packaging films.

Using gas-assisted electrospinning to design rod-shaped particles from starch for thickening agents and Pickering emulsifiers

Starch's large particle size and compact semi-crystalline structure limit its effectiveness as an emulsifier and shear-reversible thickener. To address this, we used gas-assisted electrospinning to convert large starch granules into thin fibers and then into rod-shaped particles for use as starch-based thickeners and emulsifiers. Manipulating the starch concentration in formic acid, and the electrospinning parameters, caused the jetted polymers to form different shapes. At low starch content (<5 w/w%), electrospraying produced smaller particles (0.4-3.0 μm diameter). At higher concentrations, the polymers tangled and favored the formation of fibers (0.5-3.9 μm diameter). The starch's morphological behavior was fine-tuned by adjusting flow rate, coaxial airflow pressure, voltage, needle gauge, and jetting distance. Extensive formic acid treatment (> 4 days) caused a fiber-to-bead transition. Fiber suspensions exhibited ∼106-times higher viscosity (3215 Pa·s at a shear rate of 0.002 s-1) than unmodified starch. High-shear and ultrasonication were used post-spin to chop the fibers into rod-shaped particles (4, 6 and 8 μm length), which were used as effective emulsifiers. The longest rods (8 μm) stabilized emulsions with the smallest droplets (12 μm). Using food-safe polymers, this study demonstrated that the shape of particles plays important roles in modulating the material functionalities.

Strategies and Methodologies for Improving Toughness of Starch Films

Starch films have attracted increasing attention due to their biodegradability, edibility, and potential use as animal feed from post-products. Applications of starch-based films include food packaging, coating, and medicine capsules. However, a major drawback of starch-based films is their brittleness, particularly under dry conditions, caused by starch retrogradation and the instability of plasticizers. To address this challenge, various strategies and methodologies have been developed, including plasticization, chemical modification, and physical reinforcement. This review covers fundamental aspects, such as the microstructures, phase transitions, and compatibility of starch, as well as application-oriented techniques, including processing methods, plasticizer selection, and chemical modifications. Plasticizers play a crucial role in developing starch-based materials, as they mitigate brittleness and improve processability. Given the abundance of hydroxyl groups in starch, the plasticizers used must also contain hydroxyl or polar groups for compatibility. Chemical modification, such as esterification and etherification, effectively prevents starch recrystallization. Reinforcements, particularly with nanocellulose, significantly improved the mechanical properties of starch film. Drawing upon both the literature and our expertise, this review not only summarizes the advancements in this field but also identifies the limitations of current technologies and outlines promising research directions for future development.

Fabrication and Enhanced Flexibility of Starch-Based Cross-Linked Films

The development of sustainable materials has driven significant interest in starch as a renewable and biodegradable polymer. However, the inherent brittleness, hydrophilicity, and lack of thermoplasticity of native starch limit its application in material science. This study addresses the limitations of native starch by converting it to dialdehyde starch (DAS) and cross-linking with polyether diamines via imine bonds. The effects of Jeffamine molecular weights (D-2000, D-400, and D-230) and mole ratios on the mechanical, thermal, and structural properties of starch-based films were examined. The cross-linked DAS/Js films exhibited significant enhancements in flexibility and toughness. Specifically, DAS/J2000 at a 0.03 mol ratio achieved a tensile strength of 62.9 MPa. In comparison, DAS/J400 at a 0.5 mol ratio demonstrated 126.2% elongation at break, indicating the balance between cross-linking density and chain mobility. X-ray diffraction (XRD) analysis revealed reduced crystallinity and tighter molecular packing with increased cross-linking. Dynamic mechanical analysis (DMA) indicated a decrease in Tg with an increasing mole ratio, reflecting enhanced molecular mobility. The results underscore the potential of optimized cross-linking conditions to produce starch-based films with properties that contribute to developing sustainable biopolymer materials.

Carbohydrate polymer-driven nanoparticle synthesis and functionalization in the brain tumor therapy: A review

The brain tumors have been characterized with aggressive and heterogeneous nature. The treatment of brain tumors has been challenging due to their sensitive location and also, presence of blood-brain barrier (BBB) that reduces the entrance of bioactive compounds to the brain tissue. Therefore, the new treatment strategies should be focused on improving the efficacy of conventional therapeutics, crossing over biological barriers and introducing new kinds of methods for brain tumor elimination. In the recent years, the application of carbohydrate polymers in the treatment of human cancers has been increased as they possess biocompatibility, biodegradability and selective targeting of tumor cells. Moreover, carbohydrate polymer-based nanoparticles demonstrate desirable drug loading and encapsulation, making them suitable for the delivery of bioactive compounds. Accordingly, the carbohydrate polymers and their nanoparticles have been developed to improve the drug and gene delivery to brain tumors. Moreover, these nanoparticles can increase sensitivity of chemotherapy and immunotherapy. In addition to providing combination therapy, the carbohydrate polymer-based nanoparticles can elevate the phototherapy-mediated tumor ablation. These nanocarriers have demonstrated desirable particle size, zeta potential and encapsulation efficiency that are beneficial for brain tumor therapy. Moreover, these nanoparticles have high biocompatibility that can be subsequently utilized in clinical studies.

Encapsulation of astaxanthin in OSA-starch based amorphous solid dispersions with HPMCAS-HF/Soluplus® as effective recrystallization inhibitor

In this study, the interaction among multifunctional excipients, including polysaccharides, cellulose derivatives, and surfactants, was particularly investigated, together with its impact on the physicochemical properties of astaxanthin amorphous solid dispersions (ASTX ASDs). It was indicated that Span 20 could rapidly form hemimicelles or aggregates in the presence of hypromellose acetate succinate HF (HPMCAS-HF, HF) or Soluplus®, while octenyl succinic anhydride modified starch (OSA-starch) efficiently assisted in the coalescence inhibition of drug-excipients aggregates, which was jointly beneficial to the recrystallization inhibition of amorphous ASTX. ASTX ASDs were further prepared with OSA-starch, HPMCAS-HF/Soluplus®, and Span 20 as the wall materials. DSC, SEM, and XRD confirmed that crystalline ASTX had transformed to amorphous state in the ASDs, while FT-IR spectra provided evidence suggesting the existence of hydrogen bonds and hydrophobic interaction between ASTX and the excipients. The dissolution of ASTX ASDs in different media revealed significant promotion, while the pharmacokinetic results further demonstrated the oral bioavailability of ASTX ASDs enhanced remarkably, exhibiting 2.75-fold (SD1) and 1.87-fold (SD2) increase, respectively, compared to ASTX bulk powder. In summary, the cellulose derivatives-surfactant interaction had great impact on the physicochemical properties of ASTX ASDs, and their combinations exhibited great potential for delivering the hydrophobic bioactive compounds efficiently.

Synthesis, characterization, and applications of starch-based nano drug delivery systems for breast cancer therapy: A review

The review examined the potential of starch-based drug delivery systems for managing breast cancer efficiently. It covered the background of breast cancer and the significance of drug delivery systems in treatment enhancement. Starch, known for its versatile physicochemical properties, was explored as a promising biopolymer for drug delivery. The review detailed the properties of starch relevant to drug delivery, synthesis methods, and characterization approaches. It discussed the application of starch-based systems in breast cancer treatment, focusing on their role in improving chemotherapy delivery. The advantages and limitations of these systems, such as biocompatibility and drug loading capacity, were evaluated, along with future research directions in starch modification and emerging technologies. The review concluded by emphasizing the potential of starch-based drug delivery systems in improving breast cancer treatment outcomes.

Structural and rheological characterization of starch-based eutecto-oleogel

The study aimed to develop a novel eutecto-oleogel and its characterizations. Using starch, beeswax, oil, and natural deep eutectic solvents (NADES), an oleogel with low hardness and high liquid fat was developed. The addition of starch and NADES in oleogels caused the formation of new intra or intermolecular hydrogen bonding and improved the oil binding capacity, thermal behavior, and texture of the oleogels. The oleogel with 1 % starch formed a strong gel with the most favorable functional, textural, flow properties and a high fanning factor. Complementary tests of the oleogel exhibited shear thinning and frequency-independent behavior, with zero residual effect. Non-isothermal crystallization and melting analysis of the oleogels showed noticeable differences among the various oleogels. These results contribute to a better understanding of oleo gelation in rice bran oil-based oleogels with NADES, and beeswax for formulating food, pharmaceutical, and personal care products with desired physical properties.

Exploring urea as a prospective auxiliary for starch functionalization: A concise review on modified starch properties and the sustainable packaging films

Urea is also known as carbamide, an inexpensive and eco-friendly additive for starch functionalization. This article reviews the potential role of urea in starch modification, with the prominence of the mechanism of urea action, alterations in the starch structure and functional properties. In addition, current literature conveys the prospective effect of urea in fabricating starch films for food packaging, and the relevant areas that need to be covered in the forthcoming research are specified at the end of the article section. Urea can modify the diverse physico-chemical and functional properties of starch. Starch-based films exhibit pronounced effects on their mechanical and barrier properties upon the incorporation of urea, although this effect strongly depends on the urea content and degree of substitution (DS). Overall, urea holds great potential for use in the starch and bioplastic film industries, as it produces biocompatible derivatives with desirable performance.

Effect of ethanol addition on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes

The effects of ethanol on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes (e-TBSQ and e-TBSR) were investigated. Ethanol restricted the gelatinization of Tartary buckwheat starch (TBS), which resulted an increase in ∆H, G' and G" as well as a decrease in apparent viscosity of e-TBSQ and e-TBSR. The particle size, scanning electron microscopy and X-ray diffraction results showed that ethanol influenced the morphological structure of TBS granules and the starch crystalline structure in e-TBSQ and e-TBSR changed from B-type to V-type when the ethanol concentration was 25%. Saturation transfer difference-nuclear magnetic resonance results revealed that ethanol weakened the binding ability of quercetin/rutin to TBS in e-TBSQ and e-TBSR, leading to a change in the binding site on the quercetin structural unit. The residual ungelatinized TBS granules in e-TBSQ and e-TBSR induced a high slowly digestible starch content, and thus displayed a "resistant-to-digestion".

Benefits of Incorporating Lignin into Starch-Based Films: A Brief Review

Polysaccharides are an excellent renewable source for developing food-packing materials. It is expected that these packages can be an efficient barrier against oxygen; can reduce lipid peroxidation, and can retain the natural aroma of a food commodity. Starch has tremendous potential to be explored in the preparation of food packaging; however, due to their high hydrophilic nature, packaging films produced from starch possess poor protective moisture barriers and low mechanical properties. This scenario limits their applications, especially in humid conditions. In contrast, lignin's highly complex aromatic hetero-polymer network of phenylpropane units is known to play a filler role in polysaccharide films. Moreover, lignin can limit the biodegradability of polysaccharides films by a physical barrier, mainly, and by non-productive bindings. The main interactions affecting lignin non-productive bindings are hydrophobic interactions, electrostatic interactions, and hydrogen-bonding interactions, which are dependent on the total phenolic -OH and -COOH content in its chemical structure. In this review, the use of lignin as a reinforcement to improve the biodegradability of starch-based films in wet environments is presented. Moreover, the characteristics of the used lignins, the mechanisms of molecular interaction among these materials, and the sensitive physicochemical parameters for biodegradability detection are related.

Intelligent films based on dual-modified starch and microencapsulated Aronia melanocarpa anthocyanins: Functionality, stability and application

This study aims to enhance the physical properties and color stability of anthocyanin-based intelligent starch films. Three dual-modified starches, namely crosslinked-oxidized starch (COS), acetylated distarch phosphate (ADSP), and hydroxypropyl distarch phosphate (HDSP), were utilized as film matrices. Aronia melanocarpa anthocyanins were incorporated through three different pre-treatments (free, spray-drying microencapsulation, and freeze-drying microencapsulation) to assess the prepared films' functionality, stability, and applicability. The results indicate that the ADSP film exhibited an approximately two-fold increase in elongation at break (EAB) compared to native starch film. Specifically, the ADSP film's water contact angle (WCA) reached 90°, demonstrating excellent flexibility and hydrophobicity. Scanning electron microscopy (SEM) revealed stronger interactions between anthocyanins and the film matrix after microencapsulation. Furthermore, after 30 days of exposure to 37 °C heat and light radiation, the freeze-dried anthocyanin-based intelligent film (FDA film) exhibited minimal fading, displaying the highest stability among the tested films. Notably, during beef freshness monitoring, the intelligent films underwent significant color changes as the beef deteriorated. In conclusion, the developed FDA film, with its outstanding stability and responsive pH characteristics, holds immense potential as a novel packaging material for food applications.

Effect of microwave alone and microwave-assisted modification on the physicochemical properties of starch and its application in food

Native starch has poor stability and usually requires modification to expand its industrial application range. Commonly used methods are physical, chemical, enzymatic and compound modification. Microwave radiation, as a kind of physical method, is promising due to its uniform energy radiation, greenness, safety, non-toxicity. It can meet the demand of consumers for safe food. Microwave-assisted modification with other methods can directly or indirectly affect the structure of starch granules to obtain modified starch with high degree of substitution and low viscosity, and the modification efficiency is greatly improved. This paper reviews the effect of microwave radiation on the physicochemical properties of starch, such as granule morphology, crystallization characteristics, and gelatinization characteristics, as well as the application of microwave radiation in starch modification and starch food processing. It provides theoretical references and suggestions for the research of microwave heating modified starch and the deep processing of starchy foods.

Development of piperine nanoparticles stabilized by OSA modified starch through wet-media milling technique with enhanced anti-adipogenic effect in 3T3-L1 adipocytes

Piperine (PIP) has been known for its pharmacological activities with low water solubility and poor dissolution, which limits its nutritional application. The purpose of this research was to enhance PIP stability, dispersibility and biological activity by preparing PIP nanoparticles using the wet-media milling approach combined with nanosuspension solidification methods of spray/freeze drying. Octenyl succinic anhydride (OSA)-modified waxy maize starch was applied as the stabilizer to suppress aggregation of PIP nanoparticles. The particle size, redispersibility, storage stability and in vitro release behavior of PIP nanoparticles were measured. The regulating effect on adipocyte differentiation was evaluated using 3T3-L1 cell model. Results showed that PIP nanoparticles had a reduced particle size of 60 ± 1 nm, increased release rate in the simulated gastric (SGF) and intestinal fluids (SIF) and enhanced inhibition effect on adipogenesis in 3T3-L1 cells compared with free PIP, indicating that PIP-loaded nanoparticles with improved stability and anti-adipogenic property were developed successfully by combining wet-media milling and drying methods.

Improving structural and functional properties of starch-catechin-based green nanofiber mats for active food packaging by electrospinning and crosslinking techniques

The hydrophilic and low mechanical properties limited the application of starch-based films. In this work, a hydrophobic starch-based nanofiber mat was first successfully prepared from aqueous solution at room temperature by using electrospinning and glutaraldehyde (GTA) vapor phase crosslinking techniques for active packaging applications. Catechin (CAT) was immobilized in the nanofibers by electrospinning, resulting in higher thermal stability (Tdmax = 315.23 °C), antioxidant (DPPH scavenging activity = 94.31 ± 2.70 %) and antimicrobial (inhibition zone diameter = 15.6 ± 0.3 mm) of the fibers, which further demonstrated hydrogen bonding and electrostatic interaction between CAT and fibers. Nanofibers after GTA vapor phase crosslinking exhibited enhanced hydrophobicity (water contact angle: 15.6 ± 1.5° → 93.5 ± 2.3°) and mechanical properties (tensile strength: 1.82 ± 0.06 MPa → 7.64 ± 0.24 MPa, elastic modulus: 19.35 ± 0.63 MPa → 45.34 ± 0.51 MPa). The results demonstrated that preparation of starch-based electrospun nanofiber mats in aqueous system at room temperature overcame the challenges of organic solvent pollution and thermosensitive material encapsulation, while GTA vapor phase crosslinking technique improved the hydrophobicity and mechanical properties of nanofiber mats, which facilitated the application of starch-based materials in the field of packaging.

Acetylated nanocellulose reinforced hydroxypropyl starch acetate realizing polypropylene replacement for green packaging application

The use of natural starch as a replacement for petroleum-based packaging materials is limited due to its poor processability, weak mechanical properties, and strong moisture sensitivity. To address these limitations, this study adopts molecular design of hydroxypropylation and acetylation to sequentially modify natural starch, and material design of introducing acetylated cellulose nanofibers (ACNF) into the starch matrix to reinforce the material. Hydroxypropylation decreased the interaction force between the starch molecular chains, thereby reducing the glass transition temperature. Subsequent acetylation introduced hydrophobic acetyl groups that disrupted intermolecular hydrogen bonds, enhancing the mobility of the starch molecular chain, and endowed the hydroxypropyl starch acetate (HPSA) with excellent thermoplastic processability (melt index of 7.12 g/10 min) without the need for plasticizers and notable water resistance (water absorption rate of 3.0 %). The introduction of ACNF generated a strong interaction between HPSA chains, promoting the derived ACNF-HPSA to exhibit excellent mechanical strength, such as high impact strength of 2.1 kJ/m2, tensile strength of 22.89 MPa, elasticity modulus of 813.22 MPa, flexural strength of 24.18 MPa and flexural modulus of 1367.88 MPa. Its overall performance even surpassed that of polypropylene (PP) plastic, making it a potential alternative material for PP-based packaging materials.

Binary blends of normal corn starch and cow cockle starch for the slow-thickening behavior upon pasting

Corn starch with slow thickening property may facilitate more efficient heat transfer and safety of corn starch-thickened foods. Partial substitution of normal corn starch (NCS) with slow-pasting behavior of cow cockle starch (CCS) was hypothesized to impart binary starch blend with slow-thickening effect during hydrothermal heating. To test hypothesis, a series of starch blend dispersions (with weight ratios of CCS to NCS = 75:25, 50:50, 25:75) were prepared at various starch concentrations (6 %, 8 %, 10 %, and 12 %) and subjected to the Rapid Viscosity Analysis (RVA). RVA viscographs of starch blends were compared with that of NCS, suggesting that nearly all starch blends at various concentrations showed longer time span of pasting and lower pasting rate. Although CCS and NCS blend gels exhibited lower Young's modulus and hardness based on textural profile analysis, the sensory panels revealed that 6 % and 8 % starch blend gels (with weight ratio of CCS to NCS = 25:75) showed the mouthfeel analogous to NCS gel. These findings highlight a viable non-chemical modification strategy that enables binary blends of CCS and NCS as a novel gelling agent with slow-pasting property and may aid in safety and high-quality processing of hydrogel foods.

Formation, influencing factors, and applications of internal channels in starch: A review

Starch, a natural polymer, has a complex internal structure. Some starches, such as corn and wheat starches, have well-developed surface pores and internal channels. These channel structures are considered crucial in connecting surface stomata and internal cavities and have adequate space for loading guest molecules. After processing or modification, the starch-containing channel structures can be used for food and drug encapsulation and delivery. This article reviews the formation and determination of starch internal channels, and the influence of different factors (such as starch species and processing conditions) on the channel structure. It also discusses relevant starch preparation methods (physical, chemical, enzymatic, and synergistic), and the encapsulation effect of starch containing internal channels on different substances. In addition, the role of internal channels in regulating the starch digestion rate and other aspects is also discussed here. This review highlights the significant multifunctional applications of starch with a channel structure.

Functionality differences between esterified and pregelatinized esterified starches simultaneously prepared by octenyl succinic anhydride modification and its application in dough

Octenyl succinic anhydride (OSA)-modified starches have gained widespread interest, but the modification can produce two starches with different states ignored. Herein, the two types of starches, esterified starch (ES) and pregelatinized esterified starch (PES), prepared by OSA modification were separated, and their structural and functional characteristics were comprehensively explored. Results showed that compared with native starch (NS), ES and PES exhibited high water-holding capacity, solubility, and swelling power and significantly decreased pasting temperature and thermal stability. Dynamic rheological tests illustrated that OSA modification changed the rheological behavior of starches. Fourier transform infrared spectroscopy confirmed that PES with higher degree of substitution showed more obvious ester carbonyl and carboxylate groups than ES. Laser confocal micro-Raman spectroscopy revealed that the short-range molecular order of ES, especially PES, decreased after modification. X-ray diffraction indicated that OSA modification disrupted the crystalline structure of starch, and that more amylose-lipid complex was formed in PES. Scanning electron microscopy showed that OSA modification eroded starchs surface and reduced its smoothness, and significantly disrupted PES integrity. ES and PES could be developed as food additives for retrogradation inhibition of dough. These results provide new insights into OSA modification and expand its functional application in foods.

Improving water resistance and mechanical properties of starch-based films by incorporating microcrystalline cellulose in a dynamic network structure

The widespread use of starch-based films is hindered by inadequate tensile strength and high water sensitivity. To address these limitations, a novel starch film with a dynamic network structure was produced via the dehydration-condensation reaction of N, N'-methylene diacrylamide (MBA) and microcrystalline cellulose (MCC). The improvement in mechanical properties was enhanced by the incorporation of MCC, which was achieved through intermolecular hydrogen bonding and chemical crosslinking. To verify the interactions among MCC, MBA, and starch, x-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR), and x-ray diffraction (XRD) were conducted. The results established the predicted interactions. The dynamic network structure of the film reduced the water absorption capacity (WAC) of starch and MCC hydroxyl groups, as confirmed by differential scanning calorimeter (DSC) and dynamic mechanical thermal analysis (DMTA). These analyses showed a restriction in the mobility of starch chains, resulting in a higher glass transition temperature (Tg) of 69.26 °C. The modified starch films exhibited excellent potential for packaging applications, demonstrating a higher contact angle (CA) of 89.63°, the lowest WAC of 4.73 g/g, and the lowest water vapor transmission rate (WVTR) of 13.13 g/m2/d, along with improved mechanical properties and identical light transmittance compared to pure starch films.

An Overview of Biopolymers for Drug Delivery Applications

Nowadays, drug delivery has an important role in medical therapy. The use of biopolymers in developing drug delivery systems (DDSs) is increasingly attracting attention due to their remarkable and numerous advantages, in contrast to conventional polymers. Biopolymers have many advantages (biodegradability, biocompatibility, renewability, affordability, and availability), which are extremely important for developing materials with applications in the biomedical field. Additionally, biopolymers are appropriate when they improve functioning and have a number of positive effects on human life. Therefore, this review presents the most used biopolymers for biomedical applications, especially in drug delivery. In addition, by combining different biopolymers DDSs with tailored functional properties (e.g., physical properties, biodegradability) can be developed. This review summarizes and provides data on the progress of research on biopolymers (chitosan, alginate, starch, cellulose, albumin, silk fibroin, collagen, and gelatin) used in DDSs, their preparation, and mechanism of action.

A smart thermoresponsive macroporous 4D structure by 4D printing of Pickering-high internal phase emulsions stabilized by plasma-functionalized starch nanomaterials for a possible delivery system

Hierarchically porous structures combine microporosity, mesoporosity, and microporosity to enhance pore accessibility and transport, which are crucial to develop high performance materials for biofabrication, food, and pharmaceutical applications. This work aimed to develop a 4D-printed smart hierarchical macroporous structure through 3D printing of Pickering-type high internal phase emulsions (Pickering-HIPEs). The key was the utilization of surface-active (hydroxybutylated) starch nanomaterials, including starch nanocrystals (SNCs) (from waxy maize starch through acid hydrolysis) or starch nanoparticles (SNPs) (obtained through an ultrasound treatment). An innovative procedure to fabricate the functionalized starch nanomaterials was accomplished by grafting 1,2-butene oxide using a cold plasma technique to enhance their surface hydrophobicity, improving their aggregation, and thus attaining a colloidally stabilized Pickering-HIPEs with a low concentration of each surface-active starch nanomaterial. A flocculation of droplets in Pickering-HIPEs was developed after the addition of modified SNCs or SNPs, leading to the formation of a gel-like structure. The 3D printing of these Pickering-HIPEs developed a highly interconnected large pore structure, possessing a self-assembly property with thermoresponsive behavior. As a potential drug delivery system, this thermoresponsive macroporous 3D structure offered a lower critical solution temperature (LCST)-type phase transition at body temperature, which can be used in the field of smart releasing of bioactive compounds.

Modified polysaccharides for food packaging applications: A review

Development of new food packaging materials is crucial to reduce the use of single-use plastics and to limit their destructive impact on the environment. Polysaccharides provide an alternative solution to this problem. This paper summarizes and discusses recent research results on the potential of modifying polysaccharides as materials for film and coating applications. Modifications of polysaccharides significantly affect their properties, as well as their application usability. Although modifications of biopolymers for packaging applications have been widely studied, polysaccharides have attracted little attention despite being a prospective, environmentally friendly, and economically viable packaging alternative. Therefore, this paper discusses approaches to the development of biodegradable, polysaccharide-based food packaging materials and focuses on modifications of four polysaccharides, such as starch, chitosan, sodium alginate and cellulose. In addition, these modifications are presented not only in terms of the selected polysaccharide, but also in terms of specific properties, i.e. hydrophilic, barrier and mechanical properties, of polysaccharides. Such a presentation of results makes it much easier to select the modification method to improve the unsatisfactory properties of the material. Moreover, very often it happens that the applied modification improves one and worsens another property, which is also presented in this review.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Effects of dual modification by cationization and acetylation on the physicochemical and structural characteristics of glutinous rice starch

In this research, the effects of cationization, acetylation and dual modification by cationization and acetylation on the physicochemical and structural characteristics of glutinous rice starches were investigated. The rapid viscosity analyzer revealed a substantial increased paste viscosity post modification. Particularly, for dually modified starch, the peak viscosity increased from 3071.67 to 4082.00 cP. The freeze-thaw stability substantially enhanced, with both single cationic and dually-modified starches standing out by exhibiting no water syneresis even at 21 freeze-thaw cycles, while native starch exhibited higher syneresis, up to 74.55 %. Both single cationization and cationization-acetylation destroyed the starch granules, characterized by the roughness and cracks. But, for single acetylation, there was no notable changes on granules' morphology. Fourier transform infrared spectroscopy exhibited notable shifts after modification, both acetylation and dual modification, resulting in a new peak at 1728 cm-1. 13C cross-polarization magic angle spinning nuclear magnetic resonance spectra displayed new peaks at 52-55 and 19-22 ppm following cationization and acetylation, respectively. These structural alterations indicate the successful incorporation of functional groups during modification. Overall, this study provides valuable insights for the industrial utilization of these three modified glutinous rice starches.

Structural and property changes of starch derivatives under microwave field: A review

Native starches are commonly modified for desired properties because of their limited applications. Among various modifications, microwave irradiation has been gaining strong interests and becoming a focal area to transform starch during the last few years. Such interests reside in microwave irradiation's high heating rates, lesser extent of loss in nutritional qualities, and so on when compared with other approaches. This review summaries the effects of microwave field on the structural (e.g. morphology characteristic, lamellae structure, crystallinity, and molecular structure) and physicochemical properties (e.g. pasting properties and gelatinization) of naturally existing starch derivatives. Different microwave-assisted chemical derivatizations can directly or indirectly affect starch structure from the macroscopic to the microscopic level, thereby resulting in various functionalities. Moreover, conventional starch modification processes can be optimized by applying microwave irradiation to obtain modified starch with high degree of substitution and low viscosity. The future research will help to better understand the structural changes of microwave-assisted starch chemical derivatization and thereby creating a wide range of functionalities.

Cross-linked poly(ester urethane)/starch composite films with high starch content as sustainable food-packaging materials: Influence of cross-link density

This study focused on the development of cross-linked poly(ester urethane)/starch (PEUST) composites containing 50 wt% starch content for food-packaging materials. The NCO-terminated poly(caprolactone-urethane) prepolymer (PCUP) was first synthesized through bulk condensation. Then, low-moisture starch (0.21 wt%) and PCUP-based PEUST films were fabricated through an intensive extrusion process, followed by thermo-compression molding. The chemical structure of PCUP and PEUST was confirmed using Fourier transform infrared spectroscopy. Moreover, a comprehensive evaluation was conducted to assess the influence of cross-link density on the physicochemical properties of the composite films. The results showed that an increase in the cross-link density within the composites improved component compatibility and tensile strength but reduced crystallinity, water sensitivity, hydrolytic degradability, and water vapor permeability (WVP) of the films. In addition, the cytotoxicity tests were conducted to evaluate the safety of the composite films, and the high cell viability demonstrated non-toxicity for food application. The PEUST-II films with moderate cross-link density exhibited a suitable degradation rate (27.7 % weight loss at degradation for 140 d), optimal tensile properties (tensile strength at break: 12.4 MPa; elongation at break: 352 %), and low WVP (68.4 g/(m2⋅24h) at 30 % relative humidity). These characteristics make them highly promising as fresh-keeping food packaging.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

Comparative study of rheological properties and Pickering emulsion stabilizing capacity of nonenyl succinic anhydride and octenyl succinic anhydride modified amaranth starches

Functional properties and ability to stabilize Pickering emulsions of amaranth starch with the novel nonenyl succinic anhydride (NSA) modification and the widely used octenyl succinic anhydride (OSA) modification were compared. The NSA modification was more effective in altering the rheological properties of amaranth starches. NSA-modified amaranth starch showed significantly higher peak viscosity (7.13 Pa·s at DS of 0.02209) than the OSA-modified amaranth starch (6.10 Pa·s at DS of 0.03042). The gelatinization temperature, gelatinization enthalpy, and relative crystallinity of amaranth starch were more affected by the OSA than the NSA. The Pickering emulsions stabilized with NSA-modified starches had higher stability than those with the OSA-modified starches as characterized by particle size distribution, morphological, and rheological approaches. A lower degree of substitution by NSA than by OSA is needed to achieve a similar emulsification capacity. Thus, the NSA modification could be an efficient alternative to OSA modification in tailoring physicochemical and rheological functions, as well as stabilizing Pickering emulsions.

Fabrication and study on dually modified starch embedded in alginate hydrogel as an encapsulation system for Satureja essential oil

This study aimed to investigate how the types and order of modifications influence the structure and physicochemical characteristics of modified porous starch. The work focuses on the encapsulation of essential oil in hydrophobic microcapsules embedded in sodium alginate hydrogels. FTIR spectra indicated successful esterification of starch with OSA. 1047:1022 cm-1 and 1022:995 cm-1 band ratios of FTIR spectra revealed increased crystallinity due to enzymatic modification, supported by XRD patterns. Porous-OSA (PO) starch had 1.5 times higher degree of substitution (DS) than OSA-porous (OP) starch, confirmed by the intense peak at 0.85 ppm in 1H NMR spectra. SEM images displayed larger particles and smaller pore diameter in OP compared to PO and porous starch, indicating amylolytic enzyme inhibition by OSA. Loading efficiency (LE) showed no significant difference between OP and PO microcapsules (≈70 %), both significantly higher other starch microcapsules. OP and PO microcapsules exhibited sustained release, with enhanced antibacterial activity. Alginate hydrogels preserved about 60 % antioxidant and 90 % antibacterial activities of SEO against 2 h of UV radiation. These findings suggest that the order of modification could not affect the functional properties of final microcapsules. Additionally, the importance of alginate hydrogels as the protective and second wall material was disclosed.

Strategies for starch customization: Agricultural modification

Raw starch is commonly modified to enhance its functionality for industrial applications. There is increasing demand for 'green' modified starches from both end-consumers and producers. It is well known that environmental conditions are key factors that determine plant growth and yield. An increasing number of studies suggest growth conditions can expand affect starch structure and functionality. In this review, we summarized how water, heat, high nitrogen, salinity, shading, CO2 stress affect starch biosynthesis and physicochemical properties. We define these treatments as a fifth type of starch modification method - agricultural modification - in addition to chemical, physical, enzymatic and genetic methods. In general, water stress decreases peak viscosity and gelatinization enthalpy of starch, and high temperature stress increases starch gelatinization enthalpy and temperature. High nitrogen increases total starch content and regulates starch viscosity. Salinity stress mainly regulates starch and amylose content, both of which are genotype-dependent. Shading stress and CO2 stress can both increase starch granule size, but these have different effects on amylose content and amylopectin structure. Compared with other modification methods, agricultural modification has the advantage of operating at a large scale and a low cost and can help meet the ever-rising market of clean-label foods and ingredients.

Starch-based materials for drug delivery in the gastrointestinal tract-A review

Starch is a natural copolymer with unique physicochemical characteristics. Historically, it has been physically, chemically, or enzymatically modified to obtain ad-hoc functional properties for its use in different applications. In this context, the use of starch-based materials in drug delivery systems (DDSs) has gained great attention mainly because it is cheap, biodegradable, biocompatible, and renewable. This paper reviews the state of the art in starch-based materials design for their use in drug-controlled release with internal stimulus responsiveness; i.e., pH, temperature, colonic microbiota, or enzymes; specifically, those orally administered for its release in the gastrointestinal tract (GIT). Physical-chemical principles in the design of these materials taking into account their response to a particular stimulus are discussed. The relationship between the type of DDSs structure, starch modification routes, and the corresponding drug release profiles are systematically analyzed. Furthermore, the challenges and prospects of starch-based materials for their use in stimulus-responsive DDSs are also debated.

Carboxymethyl starch as a reducing and capping agent in the hydrothermal synthesis of selenium nanostructures for use with three-dimensional-printed hydrogel carriers

The hydrothermal method is a cost-effective and eco-friendly route for preparing various nanomaterials. It can use a capping agent, such as a polysaccharide, to govern and define the nanoparticle morphology. Elemental selenium nanostructures (spheres and rods) were synthesized and stabilized using a tailor-made carboxymethyl starch (CMS, degree of substitution = 0.3) under hydrothermal conditions. CMS is particularly convenient because it acts simultaneously as the capping and reducing agent, as verified by several analytical techniques, while the reaction relies entirely on green solvents. Furthermore, the effect of sodium selenite concentration, reaction time and temperature on the nanoparticle size, morphology, microstructure and chemical composition was investigated to identify the ideal synthesis conditions. A pilot experiment demonstrated the feasibility of implementing the synthesized nanoparticles into vat photopolymerization three-dimensional-printed hydrogel carriers based on 2-hydroxyethyl methacrylate (HEMA). When submersed into the water, the subsequent particle release was confirmed by dynamic light scattering (DLS), promising great potential for use in bio-three-dimensional printing and other biomedical applications.

Fabrication of carboxymethyl starch/xanthan gum combinations Pickering emulsion for protection and sustained release of pterostilbene

Carboxymethyl starch (CMS)/xanthan gum (XG) combinations with different ratios (CMS/XG: 1/1, 3/1, 5/1, 7/1, 9/1, w/w) were used as Pickering emulsion delivery systems to encapsulate pterostilbene (PTS) to improve its stability. The results showed that the Pickering emulsion prepared using CMS/XG combinations could effectively encapsulate PTS. When the mass ratio of CMS to XG was 1:1, the encapsulation efficiency reached 91.20 %. The spherical particles in the PTS emulsion were dissociated and homogenous. The results of backscattered light experiments and storage stability studies showed that the PTS emulsion system prepared using CMS/XG was uniform and stable, with no obvious phase separation or emulsion droplet coalescence. With an increase in the mass ratio of XG, the water distribution in the emulsion became more evenly distributed, and the aggregation of droplets was reduced. The PTS emulsion prepared using CMS/XG improved the storage retention percentage of PTS. The cumulative release of PTS in the simulated gastric fluid was significantly lower than that in simulated intestinal fluid. The Pickering emulsion prepared using CMS/XG combinations can be used as a delivery system for functional foods and help to develop an efficient and reliable release system for hydrophobic bioactive substances.

StackTHPred: Identifying Tumor-Homing Peptides through GBDT-Based Feature Selection with Stacking Ensemble Architecture

One of the major challenges in cancer therapy lies in the limited targeting specificity exhibited by existing anti-cancer drugs. Tumor-homing peptides (THPs) have emerged as a promising solution to this issue, due to their capability to specifically bind to and accumulate in tumor tissues while minimally impacting healthy tissues. THPs are short oligopeptides that offer a superior biological safety profile, with minimal antigenicity, and faster incorporation rates into target cells/tissues. However, identifying THPs experimentally, using methods such as phage display or in vivo screening, is a complex, time-consuming task, hence the need for computational methods. In this study, we proposed StackTHPred, a novel machine learning-based framework that predicts THPs using optimal features and a stacking architecture. With an effective feature selection algorithm and three tree-based machine learning algorithms, StackTHPred has demonstrated advanced performance, surpassing existing THP prediction methods. It achieved an accuracy of 0.915 and a 0.831 Matthews Correlation Coefficient (MCC) score on the main dataset, and an accuracy of 0.883 and a 0.767 MCC score on the small dataset. StackTHPred also offers favorable interpretability, enabling researchers to better understand the intrinsic characteristics of THPs. Overall, StackTHPred is beneficial for both the exploration and identification of THPs and facilitates the development of innovative cancer therapies.

Evolution of the free volume during water desorption in thermoplastic starch/citric acid films: In situ positron annihilation studies

The effect of citric acid (CA) concentration and water content on the free hole volume of thermoplastic cassava starch films (TPS) was studied. To this aim, continuous in situ positron annihilation lifetime spectroscopy measurements were performed at fixed moisture content and during water desorption. The results show that the increase in CA concentration leads to wider free hole volume distributions with lower mean values. During water desorption, the mean values and width of such distributions systematically decrease with the exposure time, and the evolution of the hole volumes was well-described using the Kohlrausch-Williams-Watts function. The water vapour permeability was significantly higher in films incorporating 5 % (w/w) of CA, in line with the more open network of this material that was revealed in the hole volumes distribution. The Young's modulus of all the developed films increased significantly after partial water desorption, which was attributed to the plasticizer loss reflected in a decrease in the mean hole volume value (between 4 % and 13 %). This work evidences that the control and report of the relative humidity are essential when testing TPS-based films, as their nanostructures are strongly dependent on external conditions.

Thermogravimetric, Morphological and Infrared Analysis of Blends Involving Thermoplastic Starch and Poly(ethylene-co-methacrylic acid) and Its Ionomer Form

This study focuses on the thermal properties and structural features of blends consisting of thermoplastic starch (TPS) and poly(ethylene-co-methacrylic acid) copolymer (EMAA) or its ionomer form (EMAA-54Na). The aim is to investigate how carboxylate functional groups of the ionomer form intervene in blends compatibility at the interface of the two materials and how this impacts their properties. Two series of blends (TPS/EMAA and TPS/EMAA-54Na) were produced with an internal mixer, with TPS compositions between 5 and 90 wt%. Thermogravimetry shows two main weight losses, indicating that TPS and the two copolymers are primarily immiscible. However, a small weight loss existing at intermediate degradation temperature between those of the two pristine components reveals specific interactions at the interface. At a mesoscale level, scanning electron microscopy confirmed thermogravimetry results and showed a two-phase domain morphology, with a phase inversion at around 80 wt% TPS, but also revealed a different surface appearance evolution between the two series. Fourier-transformed infrared spectroscopy analysis also revealed discrepancies in fingerprint between the two series of blends, analysed in terms of additional interactions in TPS/EMAA-54Na coming from the supplementary sodium neutralized carboxylate functions of the ionomer.