Physicochemical properties and antibacterial activity of corn starch-based films incorporated with Zanthoxylum bungeanum essential oil

Development of κ-carrageenan/tourmaline composite for active food packaging applications: Improved mechanical, gas barrier, and antimicrobial

In order to solve the environmental pollution problems of traditional food packaging films, a kind of antibacterial packaging film based on κ-carrageenan and tourmaline powder was prepared. The addition of tourmaline powder as an inorganic filler improved the mechanical properties and gas barrier properties of κ-carrageenan films, and tourmaline had the function of spontaneously generating negative ions (NAIs) to give the film the antibacterial effect. With the increase in the amount of tourmaline powder, the water vapor permeability and oxygen permeability decrease, the water contact angle becomes larger, and the thermal degradation temperature increases. When the additional amount of tourmaline powder is 0.75 (%, w/v), the elongation at break and tensile strength can reach 39.356 % and 8.952 MPa. The κ-carrageenan/tourmaline composite film has an inhibitory effect on foodborne S. aureus, the best inhibition rate was obtained at 39.80 %. The weight loss of the figs packaged with this film is reduced, and the decay rate is slower. These results indicated that the κ-carrageenan/tourmaline composite film is promising in the food industry.

Development and characterization of corn starch-based films enhanced with Chlorella vulgaris nanocellulose-stabilized Pickering emulsion of Zanthoxylum bungeanum essential oil for cherry tomato preservation

To reduce plastic usage in food packaging, this study developed an active composite film, named CNZC, by incorporating Chlorella vulgaris derived-cellulose nanocrystals-stabilized ZBEO Pickering emulsions into a corn starch (CS) matrix for cherry tomatoes preservation. Microalgae are a sustainable source of cellulose nanocrystals (CNC) due to their rapid growth and low resource demands, offering potential for sustainable packaging. Zanthoxylum bungeanum essential oil (ZBEO) was chosen as an active component. The overall properties of 1.0-CNZC and 2.0-CNZC films were enhanced compared to CS films. CNC-stabilized Pickering emulsions facilitated the uniform dispersion of ZBEO, enhancing continuity of films. Besides, CNZC films were found to exhibit enhanced antioxidant and antimicrobial properties, attributed to the presence of monoterpenes, alcohols, and ketones in ZBEO, which terminate free radical chain reactions and increase cell permeability. To evaluate preservation performance, the 2.0-CNZC film was selected for cherry tomato preservation experiments, showing its ability to reduce weight loss, retaining acidity, and stabilizing total soluble solids levels. These results presented CNZC films as promising candidates for active composite packaging materials.

Preparation and physicochemical characterization of different biocomposite films blended with bacterial exopolysaccharide EPS MC-5 and bacteriocin for food packaging applications

The study aims to evaluate how bacteriocin and extracellular polymeric substances (EPS) can influence the development of active packaging for food. The components might enhance the performance of packaging materials in terms of their physicochemical properties and their effectiveness in preserving food. Bacteriocin and EPS exert a significant effect in blocking the transmission of UV and visible light radiations. The molecular stability among the different functional groups of the composite films was evaluated using FT-IR analysis. The MG5 film exhibited the lowest percentage of water solubility (11.27 %) and the highest antibacterial activity against L. monocytogenes and E. coli, with a zone of inhibition measured as 21.32 ± 0.76 and 18.81 ± 0.29 mm, respectively. The TGA results indicated a noteworthy level of thermal stability in the composite films. Specifically, the MG5 bacteriocin blended film exhibited an approved metal chelation activity and demonstrated superior antioxidant activity, as evidenced by enhanced DPPH and ABTS+ scavenging activities. The incorporation of bacteriocin enhanced the interactions among the film components, and surface roughness was greatly impacted as revealed by the FE-SEM analysis. MG5 film exhibited excellent biodegradability in the natural soil environment, according to a soil burial study. To sum up, MG5 films can be an effective food packaging material, particularly for fried or high-fat items that are prone to contamination from microorganisms.

Fabraction of edible bio-nanocomposite coatings from pectin-containing lignocellulosic nanofibers isolated from apple pomace

Minimally processed fruits are increasingly demanded in modern society, but the management of perishable waste pomaces (WPs) and the products' short shelf-life are still big issues. Here, a facile approach of reconstruing apple pomace (AP) into edible bio-nanocomposite coatings of fresh-cutting apple slices was successfully developed through alkaline demethylation followed by high-pressure homogenization. The fibrillation of AP fibers is largely improved by -COO- at a concentration of 1.23 mmol g-1, which is released through alkaline demethylation of pectin, instead of relying on intricated or costly cellulose modifications. The average width of AP nanofibers (AP-NFs) downsizes to 18 nm. By casting, AP-NFs fabricate homogeneous films with comparable transparency (56 % at 600 nm), superior mechanical strength (6.4 GPa of Young modulus and 81.7 MPa of strength) and oxygen barrier properties (79 mL μm m-2 day-1 bar-1), and non-toxicity. Moreover, the AP-NF coatings effectively extend shelf life of apple slices by inhibiting browning and respiration, and retain firmness. This research demonstrates a way to valorize WPs as edible coatings for fruit packaging.

Antimicrobial starch-based cryogels and hydrogels for dual-active food packaging applications

The present study reports on the valorisation of starch waste biomass to produce dual-active cryogels and hydrogels able to adsorb water and deliver antimicrobial substances for fresh food packaging applications. Starch hydrogels were prepared by oxidation with sodium metaperiodate in water and mild conditions, while cryogels were obtained by freeze-drying process. To explore the role of starch composition on the final properties of materials, two starches differing in amylose/amylopectin ratio, were evaluated. The prepared materials were microstructurally and morphologically characterized by FTIR and NMR spectroscopy (1D, 2D, and DOSY experiments), and SEM microscopy. To provide the materials with active properties, they were loaded with antimicrobial molecules by absorption, or by crosslinking via Schiff-base reaction. All materials demonstrated high water absorption capacity and ability to deliver volatile molecules, including diacetyl and complex mixtures like mint essential oil. The release profiles of the adsorbed molecules were determined through quantitative NMR spectroscopy over time. The antibacterial activity was successfully demonstrated against Gram-positive bacterial strains for unloaded cryogels and hydrogels, and after loading with diacetyl and essential oil. The developed materials can be regarded as part of active pads for food packaging applications capable to control moisture inside the package and inhibit microbial contamination.

Preparation and Characterization of Chitosan/Starch Nanocomposites Loaded with Ampicillin to Enhance Antibacterial Activity against Escherichia coli

Chitosan/starch nanocomposites loaded with ampicillin were prepared using the spray-drying method by mixing various ratios of chitosan and starch. The morphology of chitosan/starch nanoparticles was studied using a scanning electron microscope (SEM), and the zeta potential value and size distribution were determined by a Nanoparticle Analyzer. The results show that the chitosan/starch nanocomposites have a spherical shape, smooth surface, and stable structure. Nanoparticle size distribution ranged from 100 to 600 nm, and the average particle size ranged from 300 to 400 nm, depending on the ratio between chitosan and starch. The higher the ratio of starch in the copolymer, the smaller the particle size. Zeta potential values of the nanocomposite were very high, ranging from +54.4 mV to +80.3 mV, and decreased from 63.2 down to +37.3 when loading with ampicillin. The chitosan/starch nanocomposites were also characterized by FT-IR to determine the content of polymers and ampicillin in the nanocomposites. The release kinetics of ampicillin from the nanocomposites were determined in vitro using an HPLC profile for 24 h. The loading efficiency (LE) of ampicillin into chitosan/starch nanoparticles ranged from 75.3 to 77.3%. Ampicillin-loaded chitosan/starch nanocomposites were investigated for their antibacterial activity against antibiotic-resistant Escherichia coli in vitro. The results demonstrate that the antibacterial effectiveness of nanochitosan/starch loading with ampicillin against E.coli was 95.41%, higher than the 91.40% effectiveness of ampicillin at the same concentration of 5.0 µg/mL after 24 h of treatment. These results suggest that chitosan/starch nanocomposites are potential nanomaterials for antibiotic drug delivery in the pharmaceutical field.

Cassava bagasse starch and oregano essential oil as a potential active food packaging material: A physicochemical, thermal, mechanical, antioxidant, and antimicrobial study

This research evaluates the use of cassava bagasse starch and oregano essential oil (OEO) in an active film. For comparison, films of cassava starch (CS) and cassava bagasse starch (BS) were prepared with OEO at 1, 2, and 3 %. Physical, thermal, mechanical, antioxidant, and antimicrobial properties were determined. BS films presented higher thickness, WVP, ΔE, modulus of elasticity, and maximum stress, but lower strain at break compared to CS films. Adding OEO into the films increased their thickness, moisture, solubility, WVP and strain at break. However, maximum stress, modulus of elasticity, and T dmax decreased. The CS films added with 3 % of OEO showed higher WVP (6.32 × 10-14 kg m/m2.s.Pa), intermediate solubility of 39 % and low maximum stress (0.19 MPa) while the BS film with 3 % of OEO presented 5.73 × 10-14 kg m/m2.s.Pa, 30 % and 0.39 MPa, respectively. The increase from 1 % to 3 % of OEO increased the total phenolic compound content and antioxidant activity of the films by 1.3-fold and 3.7-fold, respectively. The incorporation of 3 % OEO in the films inhibited the growth of S. aureus and E. coli. Therefore, BS and OEO films offer a promising solution as biodegradable active food packaging, providing a more sustainable alternative to traditional non-biodegradable plastic packaging.

Preparation of Complex Polysaccharide Gels with Zanthoxylum bungeanum Essential Oil and Their Application in Fish Preservation

In this study, novel functional ZEO-complex gels were prepared using sodium alginate, inulin, grape seed extract (GSE), and Zanthoxylum bungeanum essential oil (ZEO) as the primary raw materials. The effect of the addition of inulin, GSE, and ZEO on water vapor permeability (WVP), tensile strength (TS), and elongation at break (EAB) of ZEO-complex polysaccharide gels was investigated. A comprehensive score (Y) for evaluating the characteristics of ZEO-complex polysaccharide gels was established by principal component analysis. MATLAB analysis and box-Behnken design describe each factor's four-dimensional and three-dimensional interactions. It was found that Y could reach the maximum value when the ZEO addition was at a moderate level (C = 2%). The optimum preparation process of ZEO-complex polysaccharide gels was as follows: the addition of inulin was at 0.84%, the addition of GSE was at 0.04%, and the addition of ZEO was at 2.0785%; in this way, the Y of ZEO-complex polysaccharide gels reached the maximum (0.82276). Optical scanning and X-ray diffraction tests confirmed that the prepared ZEO-complex gels have a smooth and continuous microstructure, good water insulation, and mechanical properties. The storage test results show that ZEO-complex polysaccharide gels could play a significant role in the storage and fresh-keeping of grass carp, and the physicochemical properties of complex polysaccharide gels were improved by adding ZEO. In addition, according to the correlation of fish index changes during storage, adding ZEO in complex polysaccharide gels was closely correlated with the changes in fish TBARS and TVB-N oxidation decay indices. In conclusion, the ZEO-complex polysaccharide gels prepared in this study had excellent water insulation, mechanical properties, and outstanding fresh-keeping effects on grass carp.

Enhancing the antioxidant properties and compatibility of protein/sodium alginate film by incorporating Zanthoxylum bungeanum essential oil Pickering emulsion

Zanthoxylum bungeanum essential oil (ZBEO) Pickering emulsion was incorporated into rice protein (RP)/sodium alginate (SA)-based film to enhance the antioxidant activity and compatibility. With increasing ZBEO content from 2 % to 4 %, the average size of ZBEO Pickering emulsion ranged from 124.28 to 165.65 nm. The best mechanical property with a tensile strength of 14.56 MPa and hydrophobicity with a water vapor permeability of 2.11 × 10-12 g⋅cm-1⋅s-1⋅Pa-1 of emulsion film were achieved with 0.8 % ZBEO. In addition, the loss of ZBEO in the emulsion films was reduced by 11-14 %. The DPPH radical scavenging activity of emulsion film with 1.2 % ZBEO was 65.54 % in 95 % ethanol. The results of Fourier transform infrared spectroscopy and molecular dynamics simulation showed that electrostatic interactions played a leading role in film formation. Overall, ZBEO Pickering emulsion is an effective method to enhance the antioxidant activity, mechanical strength and hydrophobicity of RP/SA film.

Effect of incorporating white pepper (Piper nigrum L.) oleoresin on starch/alginate films

The development of films based on natural components has demonstrated their potential for food preservation. In this research, the effect of the inclusion of white pepper oleoresin (WPO) in a film made from cassava starch and sodium alginate (FWPO) on the antimicrobial, physicochemical, mechanical, optical, and structural properties was evaluated. The films were formulated with different concentrations of WPO (0.0, 0.5, 1.0 and 1.5%). The results obtained indicated that the incorporation of WPO in the film increased the antioxidant activity against the 1,1-diphenyl-2-picryl-hydrazyl radical (DPPH), and an inhibitory effect against Escherichia coli and Staphylococcus aureus bacteria was also observed. Elongation at break (EB), water vapor permeability (WVP), moisture content, solubility, and luminosity (L*) decreased significantly (p < 0.05) with the addition of WPO. On the other hand, the tensile strength (TS), the value of b* (tendency toward yellow) and the opacity increased. Scanning electron microscopy (SEM) images showed a smooth, uniform appearance, and continuous dispersion between cassava starch, alginate and WPO. FTIR spectra showed the interactions between the film components. X-ray diffraction (XRD) patterns showed that the addition of WPO did not affect the structural stability of the films. The results obtained indicate the possible use of WPO in the packaging of food products, contributing to the improvement of food quality and safety.

Enhancing bread preservation through non-contact application of starch-based composite film infused with clove essential oil nanoemulsion

In this study, we have successfully produced a corn starch-based composite film through the casting method, formulated with clove essential oil nanoemulsion (NCEO) and corn starch. The physical and chemical changes of the composite films were investigated at various concentrations (10 %, 20 % and 40 %) of NCEO. Furthermore, the non-contact preservation effects of the composite films on bread during 15-day storage were also examined in this study. As the concentration of NCEO increased, the composite films presented a gradual thinning, roughening, and yellowing in appearance. Following this, the water content, water vapor permeability rate, and elongation at break of the films decreased, while their hydrophobicity, tensile strength, antioxidant and antimicrobial activity increased accordingly. Through FT-IR, X-ray diffraction and thermal gravimetric analysis, it was demonstrated that NCEO has strong compatibility with corn starch. Additionally, the indices' analysis indicated that utilizing the composite film incorporating 40 % NCEO can significantly boost the shelf life and quality of bread. Moreover, it was revealed that application of the non-contact treatment with composite film could potentially contribute certain preservation effects towards bread. In light of these findings, the composite film with non-contact treatment exhibits potential as an effective, safe, and sustainable preservation technique for grain products.

Moisture loss inhibition with biopolymer films for preservation of fruits and vegetables: A review

In cold storage, fruits and vegetables still keep a low respiratory rate. Although cold storage is beneficial to maintain the quality of some fruits and vegetables, several factors (temperature and humidity fluctuations, heat inflow, air velocity, light, etc.) will accelerate moisture loss. Biopolymer films have attracted great attention for fruits and vegetables preservation because of their biodegradable and barrier properties. However, there is still a certain amount of water transfer occurring between storage environment/biopolymer films/fruits and vegetables (EFF). The effect of biopolymer films to inhibit moisture loss of fruits and vegetables and the water transfer mechanism in EFF system need to be studied systematically. Therefore, the moisture loss of fruits and vegetables, crucial properties, major components, fabrication methods, and formation mechanisms of biopolymer films were reviewed. Further, this study highlights the EFF system, responses of fruits and vegetables, and water transfer in EFF. This work aims to clarify the characteristics of EFF members, their influence on each other, and water transfer, which is conducive to improving the preservation efficiency of fruits and vegetables purposefully in future studies. In addition, the prospects of studies in EFF systems are shown.

Effects of different proportions of erythritol and mannitol on the physicochemical properties of corn starch films prepared via the flow elongation method

In this study, corn films based on corn starch were fabricated through the casting method, and various plasticizers (namely, erythritol and d-mannitol) were incorporated. The study delved into the gelatinization and physicochemical characteristics of these corn starch-based films. Additionally, the impact of different ratios of plasticizers on reductive gelatinization was assessed using RVA analysis. The investigation also encompassed the effects of varying plasticizer ratios on starch granule expansion, amylose dissolution, and amylopectin melting. Interestingly, as the proportion of d-mannitol increased, there were gradual increases in film thickness, water content, and water contact angle, alongside decreases in water vapor permeability, crystallinity, and water solubility of the corn starch-based films. In essence, this research provides a fundamental basis for potential industrial applications of corn starch-based films.

Effects of crosslinking agents on properties of starch-based intelligent labels for food freshness detection

The impact of citric acid, carboxymethyl cellulose, carboxymethyl starch, sodium trimetaphosphate, or soybean protein on the crosslinking of starch-based films was examined. These crosslinking starch films were then used to create pH-sensitive food labels using a casting method. Blueberry anthocyanins were incorporated into these smart labels as a pH-sensitive colorimetric sensor. The mechanical properties, moisture resistance, and pH responsiveness of these smart labels were then examined. Crosslinking improved the mechanical properties and pH sensitivity of the labels. These different crosslinking agents also affected the hydrophobicity of the labels to varying degrees. Soybean protein was the only additive that led to labels that could sustain their structural integrity after immersion in water for 12 h. Because it increased the hydrophobicity of the labels, which decreased their water vapor permeability, moisture content, swelling index, and water solubility by 47 %, 29 %, 52 % and 10 %, respectively. The potential of using these labels to monitor the freshness of chicken breast was then examined. Only the films containing soybean protein exhibited good pH sensitivity, high structural stability, and low pigment leakage. This combination of beneficial attributes suggests that the composite films containing starch and soybean protein may be most suitable for monitoring meat freshness.

Chitosan/oxidized Konjac Glucomannan films incorporated with Zanthoxylum Bungeanum essential oil: A novel approach for extending the shelf life of meat

In this study, a novel edible composite film was prepared by chitosan, konjac glucomannan oxidized with ozone for 60 min (OKGM), and Zanthoxylum Bungeanum essential oil (ZEO). The chitosan/OKGM film was fortified with ZEO to assess the physical properties, structure, antioxidant and antibacterial abilities, and pork preservation systematically. Compared to the control group, the addition of 1 % ZEO increased tensile strength by 18.92 % and decreased water solubility, water vapor permeability, and moisture content by 10.05 %, 6.60 %, and 1.03 %, respectively. However, the treatment with ZEO (1.5 % and 2 %) decreased mechanical properties and increased the water vapor permeability. The ultraviolet barrier, antioxidant, and antibacterial abilities of composite films were enhanced by increasing the ZEO addition. Moreover, the COZ-1 film was used to protect the freshness of pork with slow-release behavior of ZEO. The results showed that addition of ZEO significantly decreased the pH value, total viable count, redness, total volatile basic nitrogen, and thiobarbituric acid and increased the hardness of pork after preservation for 10 days. Therefore, the chitosan/OKGM loaded with ZEO film can potentially be used as food packaging, providing new ideas for the research on active packaging materials.

Techno-functional properties of active film based on guar gum-propolis and its application for "Nanguo" pears preservation

Guar gum (GG) composite films, incorporating the ethanolic extract of propolis (EEP), were prepared and subjected to a comprehensive investigation of their functional characteristics. The addition of EEP resulted in a discernible enhancement in the opacity, moisture barrier capacity, and elongation at break. Incorporating EEP led to a noteworthy increase in the total phenolic and total flavonoid content of the films, resulting in superior antioxidant capacity upon GG-EEP films. Remarkably, the addition of 5 % EEP yielded noteworthy outcomes, manifesting in a DPPH radical scavenging rate of 47.60 % and the ABTS radical scavenging rate of 94.87 %, as well as FRAP and cupric reducing power of 331.98 mmol FeSO4-7H2O kg-1 and 56.95 μg TE mg-1, respectively. In addition, GG-EEP films demonstrated antifungal effect against Penicillium expansum and Aspergillus niger, along with a sustained antibacterial effect against Escherichia coli and Staphylococcus aureus. GG-EEP films had superior inhibitory ability against Gram-positive bacteria than Gram-negative bacteria. Crucially, GG-EEP composite films played a pivotal role in reducing both lesion diameter and depth, concurrently mitigating weight loss and firmness decline during the storage period of "Nanguo" pears. Therefore, GG-EEP composite films have the considerable potential to serve as advanced and effective active packaging materials for food preservation.

Effect of apple polyphenols on physicochemical properties of pea starch/pulp cellulose nanofiber composite biodegradable films

A pea starch (PS) and pulp cellulose nanofibers (CNF-P) hybrid matrix biodegradable film was prepared using apple polyphenol (AP) as the active substance. SEM and thermogravimetric analyses showed that apple polyphenols could be uniformly distributed and form hydrogen bonds with the matrix, and the increase in crystallinity improved the thermal stability of the films (the final residue of the films increased from 22.66 % to 31.82 %). The TS and EAB of the films reached their maximum values of 11.14 ± 1.73 MPa and 71.55 ± 8.8 %, respectively, at an AP content of 1.5 %. It should be noted that the antioxidant properties of the films were significantly positively correlated with the AP content, and the DPPH radical scavenging rate of the films reached 73.77 % at an AP content of 4.5 %, which was about 49 times higher than that of the control film. The same trend was observed in the UV-vis spectra. In addition, the total color difference and water solubility of the membranes increased from 4.29 ± 0.29 to 31.86 ± 1.90 and from 20.01 ± 0.97 % to 21.70 ± 1.99 %, respectively, and the biodegradability also showed an upward trend. These findings provide a theoretical basis and data support for the development of multifunctional biodegradable food packaging materials.

Synthesis of tapioca starch/palm oil encapsulated urea-impregnated biochar derived from peppercorn waste as a sustainable controlled-release fertilizer

Nutrient leaching and volatilization cause environmental pollution, thus the pursuit of developing controlled-release fertilizer formulation is necessary. Biochar-based fertilizer exhibits slow-release characteristic, however the nutrient release mechanism needs to be improved. To overcome this limitation, the approach of applying encapsulation technology with biochar-based fertilizer has been implemented in this study. Black peppercorn waste was used to synthesize urea-impregnated biochar (UIB). Central composite design was used to investigate the effects of pyrolysis temperature, residence time and urea:biochar ratio on nitrogen content of UIB. The optimum condition to synthesize UIB was at 400 °C pyrolysis temperature, 120 min residence time and 0.6:1 urea:biochar ratio, which resulted in 16.07% nitrogen content. The tapioca starch/palm oil (PO) biofilm formulated using 8 g of tapioca starch and 0.12 µL of PO was coated on the UIB to produce encapsulated urea-impregnated biochar (EUIB). The UIB and EUIB pellets achieved complete release of nitrogen in water after 90 min and 330 min, respectively. The nutrient release mechanism of UIB and EUIB was best described by the Higuchi model and Korsmeyer-Peppas model, respectively. The improvement of water retention ratio of UIB and EUIB pellets was more significant in sandy-textural soil as compared to clayey-textural soil. The EUIB derived from peppercorn waste has the potential to be utilized as a sustainable controlled-release fertilizer for agriculture.

Effect of emulsifiers on the properties of corn starch films incorporated with Zanthoxylum bungeanum essential oil

The use of natural and safe ingredients in green food packaging material is a hot research topic. This study investigated the effect of different emulsifiers on starch film properties. Three types of emulsifiers, including Tween 80 as a small-molecule surfactant, sodium caseinate (CAS), whey protein isolate (WPI), and gelatin (GE) as macromolecule emulsifiers, whey protein isolate fibril (WPIF) as a particle emulsifier, were utilized to prepare Zanthoxylum bungeanum essential oil (ZBO) emulsions. The mechanical, physical, thermal, antibacterial properties, microstructure and essential oil release of starch films were investigated. CAS-ZBO nanoemulsion exhibited the smallest particle size of 198.6 ± 2.2 nm. The film properties changed with different emulsifiers. CAS-ZBO film showed the highest tensile strength value. CAS-ZBO and WPIF-ZBO films exhibited lower water vapor permeability than Tween-ZBO. CAS-ZBO film showed good dispersion of essential oil, the slowest release rate of essential oils in all food simulants, and the best antibacterial effect against Staphylococcus aureus and Listeria monocytogenes. The films composed of CAS-ZBO nanoemulsion, corn starch, and glycerol are considered more suitable for food packaging. This work indicated that natural macromolecule emulsifiers of CAS and WPIF are expected to be used in green food packaging material to offer better film properties.

Development of Emulsion Gels Stabilized by Chitosan and Octenyl Succinic Anhydride-Modified β-Cyclodextrin Complexes for β-Carotene Digestion and 3D Printing

β-cyclodextrin (β-CD)-based emulsion gels encapsulated with nutrition for three-dimensional (3D) printing are promising, while obstacles such as low bioaccessibility of bioactive compounds and the molding process in food manufacturing hinder their application. This study intended to develop stable composite emulsion gels using the complexes of chitosan (CS) and octenyl succinic anhydride (OSA)-modified β-CD (OCD) to conquer these challenges. The esterification of OSA generated more negatively charged OCD and ester groups, which aided in the combination of OCD and CS through enhanced electrostatic and hydrogen bonding interactions. The addition of CS improved the emulsification properties of the complexes and acted as a bridge link in the aqueous phase, thereby increasing the gel strength of the composite emulsion gels. Moreover, the encapsulation of β-carotene destabilized the strength of the emulsion gels by lowering the interfacial tension. The emulsion gel stabilized by OCD3/CS-0.75% at an initial pH not only successfully encapsulated β-carotene and presented the highest bioaccessibility of 41.88 ± 0.87% in the in vitro digestion but also showed excellent 3D printability. These results provided a promising strategy to enhance the viscoelasticity of β-CD-based emulsion gels and accelerate their application in bioactive compound delivery systems and 3D food printing.

Preparation and characterization of corn starch-based antimicrobial indicator films containing purple corncob anthocyanin and tangerine peel essential oil for monitoring pork freshness

A novel antibacterial indicator film was prepared by mixing corn starch with tangerine peel essential oil (TEO) Pickering emulsion emulsified by ultrasonic and esterified modified starch (UDSt), and then incorporated with purple corncob anthocyanin (PCA), which was used to monitor the freshness of pork. The results showed that the UDSt can effectively stabilize the TEO emulsion. PCA showed obvious color changes at different pH. With the increase of pH, the color of film changed from red to yellow, and its response to volatile ammonia changed from pink to cyan, showing better response ability. The loading of TEO conferred the film excellent bacteriostatic ability against E. coli and S. aureus. The film also had good ability of light blocking and free radical scavenging. In the process of pork deterioration, the antibacterial indicator film changed from pink to yellow, which was closely related to pork quality and had a good linear indicator correlation. The addition of TEO reduced the release of PCA in the antibacterial indicator film and helped to maintain the functional properties of the film. This type of antibacterial indicator film had considerable application potential in indicating food freshness.

Fortification of polysaccharide-based packaging films and coatings with essential oils: A review of their preparation and use in meat preservation

As the demand for botanical food additives and eco-friendly food packaging materials grows, the use of essential oils, edible biodegradable films and coatings are becoming more popular in packaging. In this review, we discussed the recent research trends in the use of natural essential oils, as well as polysaccharide-based coatings and films: from the composition of the substrates to preparing formulations for the production of film-forming technologies. Our review emphasized the functional properties of polysaccharide-based edible films that contain plant essential oils. The interactions between essential oils and other ingredients in edible films and coatings including polysaccharides, lipids, and proteins were discussed along with effects on film physical properties, essential oil release, their active role in meat preservation. We presented the opportunities and challenges related to edible films and coatings including essential oils to increase their industrial value and inform the development of edible biodegradable packaging, bio-based functional materials, and innovative food preservation technologies.

Effects of cinnamon essential oil-loaded Pickering emulsion on the structure, properties and application of chayote tuber starch-based composite films

The use of non-conventional starch sources to develop biodegradable and bioactive starch-based films have attracted increasing attention recently. In this study, a nonconventional chayote tuber starch (CTS) was functionalized by zein-pectin nanoparticle-stabilized cinnamon essential oil (CEO) Pickering emulsion (ZPCO) to develop a novel bioactive composite films for food packaging application. Results demonstrated that antibacterial ZPCO featuring long-term stability was successfully obtained. FTIR and SEM analyses suggested that ZPCO have favorable dispersibility and compatibility with CTS matrix. With ZPCO increasing, the transmittance, tensile strength, and moisture content of composite films decreased, whereas their elongation at break, antimicrobial and antioxidant activities increased. ZPCO added at an appropriate level (2 %) can improve water-resistance of the films and reduce water vapor permeability. More importantly, ZPCO can achieve a slower sustained-release of CEO from composite films into food simulants. Furthermore, the composite film containing 2 % ZPCO is safe and nontoxic as proved by cell cytotoxicity test, and it can significantly prolong the shelf life of ground beef by showing the lowest total volatile base nitrogen and best acceptable sensory characteristic. Overall, the incorporation of ZPCO into CTS films offers a great potential application as a bioactive material in the food packing.

Characterization of Cassava Starch Extruded Sheets Incorporated with Tucumã Oil Microparticles

The application of biopolymers and feasible technologies to obtain sheets is crucial for the large-scale production of food packages and for reducing plastic pollution. Additionally, the inclusion of additives in sheets can affect and improve their properties. This work aimed to incorporate tucumã oil (TO) and TO microparticles produced by spray drying (SD), spray chilling (SC), and their combination (SDC) into extruded cassava starch sheets and to evaluate the effect of such addition on their physical, optical, and mechanical properties. Gum Arabic and vegetable fat were used as wall materials for SD and SC/SDC, respectively. The sheets enriched with tucumã oil (FO) and the microparticles produced by SD, SC and SDC (FSD, FSC, and FSDC, respectively) presented yellow color (hue angle around 90°) and higher opacity (11.6–25.3%) when compared to the control (6.3%). All sheets showed high thickness (1.3–1.8 mm), and the additives reduced the water solubility of the materials (from 27.11% in the control to 24.67–25.54% in enriched samples). The presence of large SDC particles, as evidenced by Scanning Electron Microscopy (SEM), caused discontinuity of the sheet structure and decreased mechanical strength of the FSDC. One may conclude that potential active packages were obtained by extrusion of cassava starch sheets added with pure and encapsulated TO.

Recent advances of antibacterial starch-based materials

Starch has attracted a lot of attention because it is biodegradable, renewable, nontoxic and low cost. By adding antibacterial substances to starch, starch-based materials have antibacterial properties. The composite with other materials can improve the comprehensive performance of starch-based materials, thus broadening the application field of the material. In this paper, we focus on antibacterial starch-based materials and review their preparation and applications. It was found that antibacterial starch-based materials were most widely used in packaging, followed by medicine, and the research on smart starch-based materials was relatively less. This review may provide some reference value for subsequent studies of starch-based materials.

Biopolymer Food Packaging Films Incorporated with Essential Oils

Petroleum-based packaging materials are typically nonbiodegradable, which leads to significant adverse environmental and health issues. Therefore, developing novel efficient, biodegradable, and nontoxic food packaging film materials has attracted increasing attention from researchers. Due to significant research and advanced technology, synthetic additives in packaging materials are progressively replaced with natural substances such as essential oils (EOs). EOs demonstrate favorable antioxidant and antibacterial properties, which would be an economical and effective alternative to synthetic additives. This review summarized the possible antioxidant and antimicrobial mechanisms of various EOs. We analyzed the properties and performance of food packaging films based on various biopolymers incorporated with EOs. The progress in intelligent packaging materials has been discussed as a prospect of food packaging materials. Finally, the current challenges regarding the practical application of EOs-containing biopolymer films in food packaging and areas of future research have been summarized.

The physiochemical and photodynamic inactivation properties of corn starch/erythrosine B composite film and its application on pork preservation

This study explored the effect of erythrosine B (EB) as a photosensitizer in corn starch (CS) film and its physicochemical properties and photodynamic bacteriostatic ability against Staphylococcus aureus, Escherichia coli, and Salmonella both in vitro and inoculated on pork under the irradiation of D65 light-emitting diode (LED) (400-800 nm). The study revealed that the physiochemical properties of CS films: moisture content, water solubility, and water vapor transmission were improved with the addition of EB. In addition, the elasticity and the thermal stability of the film were enhanced. The results showed that the CS-EB films stimulated a maximum of 26.36 μg/mL hydrogen peroxide and 74.5 μg/g hydroxyl radical under irradiation. The CS composite films with a 5 % concentration of EB inhibited the bacterial growth by 4.7 Log CFU/mL in vitro after 30 min of illumination, and 2.4 Log CFU/mL on the pork samples under the same experimental condition. Moreover, the antibacterial ability was enhanced with the increase in EB concentration. Overall, the CS-EB composite films can inhibit the growth of bacteria through photodynamic inactivation and has the potential to become a new type of environmentally friendly packaging material.

The role of essential oils in maintaining the postharvest quality and preservation of peach and other fruits

Fruits are highly susceptible to postharvest losses induced majorly by postharvest diseases. Peach are favored by consumers because of their high nutritional value and delicious taste. However, it was easy to be affected by fungal infection. The current effective method to control postharvest diseases of fruits is to use chemical fungicides, but these chemicals may cause adverse effects on human health and the residual was potentially harmful to nature and the environment. So, it is especially important to develop safe, non-toxic, and highly effective strategies for the preservation of the fruits. Essential oil, as a class of the natural bacterial inhibitor, has been proven to exhibit strong antibacterial activity, low toxicity, environmental friendliness, and induce fruit resistance to microorganism, which could be recognized as one of the alternatives to chemical fungicides. This paper reviews the research progress of essential oils (Eos) in the storage and preservation of fruits, especially the application in peach, as well as the application in active packaging such as edible coatings, microcapsules, and electrospinning loading. Electrospinning can prepare a variety of nanofibers from different viscoelastic polymer solutions, and has broad application prospects. The paper especially summarizes the application of the new Eos technology on peach. The essential oil with thymol, eugenol, and carvacrol as the main components has a better inhibitory effect on the postharvest disease of peaches, and can be further applied. PRACTICAL APPLICATIONS: As an environmentally friendly natural antibacterial agent, essential oil can be used as a substitute for chemical preservatives to keep fruits fresh. This paper summarizes the different preservation methods of essential oils for fruits, and especially summarizes the different preservation methods of essential oils for peaches after harvesting, as well as their inhibitory effects on pathogenic fungi. It could provide ideas for preservation of fruits and vegetables by essential oils.

Facile microfluidic fabrication and characterization of ethyl cellulose/PVP films with neatly arranged fibers

Much attention and endeavor have been paid to developing biocompatible food packaging films. Here, ethyl cellulose (EC) and polyvinylpyrrolidone (PVP) were fabricated into films through a facile method, microfluidic spinning. Morphology observations showed that the fibers were neatly arranged with an average diameter of 1-4 μm. FTIR and X-ray diffraction analysis suggested the existence of good compatibility and interaction between EC and PVP. Thermogravimetric analysis demonstrated that PVP ameliorates the thermal properties; moreover, the tensile properties were improved, with tensile strength (TS) and Young's modulus up to 11.10 ± 1.04 MPa and 350.16 ± 45.46 MPa, respectively. The optimal formula was EC/PVP (2:3), of which the film displayed an enhanced TS of 4.61 ± 1.15 MPa and a modified water contact angle of 61.8 ± 4.4°, showing fine tensile and hydrophilic performance. This study provides a facile and green film fabrication method promising to be used for food wrapping.

Electrospun pullulan nanofiber loading zanthoxylum bungeanum essential oil/β-cyclodextrin inclusion complexes for active packaging

In this study, zanthoxylum bungeanum essential oil/β-cyclodextrin inclusion complexes (ZBEO/β-CD-ICs) were first prepared by precipitation method. When the addition of ZBEO was 1 g, the reaction time was 4 h and the reaction temperature was 55 °C, the recovery (73.88%) and loading content (9.53%) reached the highest value. The characterization results showed inclusion complexation changed the crystalline structure, enhanced interaction among molecules and increased the thermal stability. Then, nanofiber films containing ZBEO/β-CD-ICs were prepared by electrospinning. When the total polymer concentration was constant at 20%, with the increase of ZBEO/β-CD-IC content, the diameter of nanofiber and mechanical strength decreased, but the temperature corresponding to the maximum rate of weight loss increased. X-ray diffraction analysis proved that the addition of ZBEO/β-CD-IC increased the crystallinity degree of film. The Fourier transform infrared spectra indicated hydrogen bond interactions among molecules. Releasing behavior of ZBEO indicated that increase of temperature and relative humidity accelerated the releasing speed. Antibacterial and antioxidant activity results demonstrated the increase of ZBEO content enhanced antibacterial and antioxidant efficiency, Z40P10 nanofibers had the maximum antibacterial rate of 62.02% against S. aureus and the maximum antioxidant activity of 60.18%.

Antimicrobial Activity, Microstructure, Mechanical, and Barrier Properties of Cassava Starch Composite Films Supplemented With Geranium Essential Oil

In this study, we prepared cassava starch-based films by the casting method. Afterwards, the effects of geranium essential oil (GEO) on the prepared films' physicochemical, morphology, and antibacterial properties were revealed. We found that the thickness and elongation at the break of cassava starch films increased with increasing GEO concentration (from 0.5, 1, and 2%). However, increasing GEO concentration decreased the water content, water vapor permeability, and tensile strength of the prepared films'. Further, the addition of GEO increased the surface roughness, opacity, and antibacterial properties of the prepared films. With the increase of GEO concentration, L^* and a^* of cassava starch film decreased, while b^* and Δ E increased. This study provides a theory for cassava starch-based films as a biological packaging material.

Preparation and characterization of oregano essential oil-loaded Dioscorea zingiberensis starch film with antioxidant and antibacterial activity and its application in chicken preservation

In this study, abundant starch was separated from the industrial crop Dioscorea zingiberensis C.H. Wright (DZW), and a novel bioactive packaging film loaded with oregano essential oil (OEO) was prepared and characterized. NaClO solution worked as a bleacher to prepare uniform starch powder from DZW tubers. OEO was selected from among three essential oils of Labiatae family plants for its strongest antibacterial activity. After the addition of OEO into the starch-based film, the UV-vis shielding property and antioxidant activity were enhanced. Meanwhile, the films still have a considerable performance in transparency, mechanical strength and water vapor permeability after incorporated with OEO. Furthermore, the 3% OEO-loaded starch film exhibited the strongest antibacterial activity against Bacillus subtilis, Escherichia coli and Staphylococcus aureus. It effectively lowered the total viable count of fresh chicken under 4 °C preservation conditions. These results revealed that the OEO-loaded DZW starch film can exert a positive effect on maintaining the quality and extending the shelf life of fresh meat. Therefore, readily accessible DZW tubers and oregano are very promising resources for application in degradable bioactive packaging film.

Effect of Different Ratios of Glycerol and Erythritol on Properties of Corn Starch-Based Films

The demand for biodegradable products has increased; hence, a suitable method for producing green composites is essential. This study prepared corn starch-based films using the solution casting method, and the physicochemical properties of the prepared films were investigated using a mixture of glycerol (GLY) and erythritol (ERY) at different ratios (4:0, 3:1, 2:2, 1:3, and 0:4) as plasticizing agents. The crystallinity, hydrophilicity, mechanical properties, oxygen and water vapor, surface roughness, and thermal stability of corn starch-based films were analyzed using small-angle X-ray diffraction, water contact angle, automatic tensile testing machine, oxygen permeability tester and water vapor permeability analyzer, atomic force microscope, and thermogravimetric analyzer. With the increase in GLY ratio, the thickness, water-solubility, water content, water vapor permeability, elongation at break, oxygen permeability and V-shaped crystallization of the corn starch-based films increased. The tensile strength and the thermal stability decreased with increasing the GLY ratio. We developed a new plasticizer using glycerol and erythritol to improve the properties of starch films and provided the basis for the industrial production of corn starch-based films.

Effect on the Properties of Edible Starch-Based Films by the Incorporation of Additives: A Review

At present, people more actively pursuing biodegradable-based food packaging to lower the environmental problems of plastic-based packaging. Starch could become a promising alternative to plastic because of its properties (easily available, nontoxic, tasteless, biodegradable, ecofriendly, and edible). This review article is focused mainly on the impact of the properties of starch-based biodegradable films, such as their thickness, morphology, and optical, water-barrier, mechanical, oxygen-barrier, antioxidant, and antimicrobial properties, after the incorporation of additives, and how such films fulfill the demands of the manufacturing of biodegradable and edible food-based film with preferable performance. The incorporation of additives in starch-based films is largely explained by its functioning as a filler, as shown via a reduction in water and oxygen permeability, increased thickness, and better mechanical properties. Additives also showed antimicrobial and antioxidant properties in the films/coatings, which would positively impact the shelf life of coated or wrapped food material.

Current Trends in the Utilization of Essential Oils for Polysaccharide- and Protein-Derived Food Packaging Materials

Essential oils (EOs) have received attention in the food industry for developing biopolymer-derived food packaging materials. EOs are an excellent choice to replace petroleum-derived additives in food packaging materials due to their abundance in nature, eco-friendliness, and superior antimicrobial and antioxidant attributes. Thus far, EOs have been used in cellulose-, starch-, chitosan-, and protein-based food packaging materials. Biopolymer-based materials have lower antioxidant and antibacterial properties in comparison with their counterparts, and are not suitable for food packaging applications. Various synthetic-based compounds are being used to improve the antimicrobial and antioxidant properties of biopolymers. However, natural essential oils are sustainable and non-harmful alternatives to synthetic antimicrobial and antioxidant agents for use in biopolymer-derived food packaging materials. The incorporation of EOs into the polymeric matrix affects their physicochemical properties, particularly improving their antimicrobial and antioxidant properties. EOs in the food packaging materials increase the shelf life of the packaged food, inhibit the growth of microorganisms, and provide protection against oxidation. Essential oils also influence other properties, such as tensile, barrier, and optical properties of the biopolymers. This review article gives a detailed overview of the use of EOs in biopolymer-derived food packaging materials. The innovative ways of incorporating of EOs into food packaging materials are also highlighted, and future perspectives are discussed.

The relationship between linear chain length distributions of amylopectin and the functional properties of the debranched starch-based films

The relationship between linear chain length distributions and the functional properties of the starch-based films after pullulanase debranching treatment of corn (CS), rice (RS) and wheat (WS) were investigated. The results indicated that the film thickness was negatively correlated with A chains content (r = -0.939) and apparent amylose content (r = -0.926), and was positively correlated with B3 chains content (r = 0.847). The tensile strength of the debranched starch-based films were positively correlated with apparent amylose content (r = 0.813), and the elongation at break were inversely proportional to B3 chains content (r = -0.817). The hydrophobicity of the starch-based films was positively and negatively correlated with the proportions of linear chains with DP 6-12 (r = 0.892) and DP 25-36 (r = -0.863), respectively. On the contrary, no significant correlation was noticed between chain length distribution of amylopectin and transparency and thermal stability.

Preparation of corn starch/rock bean protein edible film loaded with d-limonene particles and their application in glutinous rice cake preservation

Glycerol hydrogenated rosin (GEHR) and d-limonene were prepared for micro-particles by electrostatic spray method. When the GEHR/d-limonene ratio is 5.5:4.5 and the electrostatic spray extrusion speed is 1 mL/h, the best particle size (177.24 ± 17.09 μm) and embedding rate of d-limonene (41.74 ± 9.88%) are achieved. Then, rock bean protein (RP) was extracted from wild rock beans and combined with GEHR/d-limonene particles and corn starch (CS) to prepare a new type of edible film. The prepared film was characterized using Fourier transform infrared spectroscopy in terms of structural changes and physical, optical, mechanical, and thermal properties. The results show that the edible film with a ratio of 1:1 exhibited more optimized thermal (179.2 °C) and mechanical properties (TS 0.88 MPa, EAB 54.36%). Studies on freshly prepared glutinous rice cake as an object for preservation using edible film show that the films can prolong shelf life by ~2-4 d. Through this experiment, it can serve as a reference for the development of a new type of edible film.