Crystalline polysaccharides: A review

Exudate Management, Facile Detachment, and Immunometabolism Regulation for Wound Healing Using Breathable Dressings

Developing breathable dressings with multifunctional properties (such as exudate management, easy removal, and immunometabolism regulation) presents significant challenges in wound healing. This study employs the Hofmeister effect to prepare a sodium citrate-cross-linked cryogel (CA-CS) with versatile functions, including porous and loose structures, rapid shape recovery ability, superior fatigue resistance behavior, and outstanding biocompatibility capabilities. The CA-CS cryogels demonstrated strong anti-inflammatory properties by reversing the lipopolysaccharides-induced M1 macrophages and increasing M2 macrophage percentages in vitro. Additionally, these breathable CA-CS cryogels exhibited superior hemostatic activity in vivo. The easily detachable CA-CS cryogels enhanced nutrient exchange, promoted exudate absorption, regulated immune response, and induced metabolic reprogramming, thereby supporting skin regeneration and hair follicle formation in a full-thickness skin defect mouse model. We expect that these CA-CS cryogels will drive the development of next-generation dressings for effective wound regeneration in clinical practice.

Structural characterization of pure xylan from corncob and its effect on xylooligosaccharides yield after enzymatic hydrolysis

The structure of xylan plays a significant role in the degradation rate by xylanase to product xylooligosaccharides (XOS). In this study, xylan was extracted and purified from corncob, yielding two xylan fractions (WUAX-2, WUAX-3) with purities exceeding 90 %. The structures of WUAX-2 and WUAX-3 were characterized and hydrolysis efficiency was studied in relation to their structures. FT-IR results indicated that although xylan fractions had the same types of functional groups, WUAX-3 exhibited a higher level of -OH, CH, and CO groups compared to WUAX-2. NMR, the vibration signal of WUAX-2 and WUAX-3 was β-(1 → 4) -linked D-lignin unit β-D-xylopyran. X-ray diffraction results confirmed that WUAX-2 was a stable single-crystal structure. Meanwhile, the number of side-chains of WUAX-2 in the liquid was smaller than that of WUAX-3. WUAX-2 and WUAX-3 were hydrolyzed by a high-temperature-resistant xylanase (XynA) and yielded primarily xylohexaose (X6), xylotriose (X3), and xylobiose (X2). The XOS yield of WUAX-2 was 4.25 times higher than that of WUAX-3. These results indicate that the fewer xylan side-chains and substituent groups of xylan, the higher the enzymatic hydrolysis efficiency. The findings provide a deep understanding of the effect of xylan structure on the enzymatic behavior.

Adsorption of emerging pollutants utilizing chitosan derivatives: Recent advances and future perspective

Globalization resulted in technological advancement, and urban population growth. Consequently, pollution emerged as an imminent risk to the survival of all species on Earth. Consequently, on a worldwide basis, sustainability become a major issue for legislators. Inconsistent impacts on both human and animal growth and wellness triggered health issues associated with water contamination through the chronic toxicants. Micropollutants' pollution prompted severe concerns due to their malignant, indestructible, and accumulative properties. The elimination of these toxins from industrial processes has become one of the most significant ecological challenges. A variety of both organic and simulated sorbents are available, and each of these have unique benefits. In the recent years, chitosan and its composite materials have been attempted and have been proven to be applicable for the resolution of many challenging issues related to water pollution. Among various notable benefits of adsorption processes, economic viability, ease of access, and adherence to environmental regulations are notable. Considering the above-mentioned issues, the article targets the assessment of chitosan and its composite materials for relevant environmental applications. Accordingly, the article aims to examine the performance, advantages, and disadvantages of chitosan as an adsorbent.

Selective nucleation of chitin nanocrystals in the crystallization of poly(ε-caprolactone-b-l-lactide) diblock copolymer composites

Rod-like chitin nanocrystals (ChNCs) filled biodegradable aliphatic polyesters are of great interest because as-obtained nanocomposites are all-degradable. In this work, we prepared a poly(ε-caprolactone-b-l-lactide) (PCL-b-PLA) copolyester nanocomposite with ChNCs and carried out a crystallization study. The results disclosed that the roles of ChNCs played during crystallization of copolyester matrices were very attractive: as heterogeneous nucleator of PLA phase, whereas as inert filler for PCL phase. Thus, the overall crystallization kinetics of PLA phase were accelerated. The heterogeneous nucleation led to the formation of more amounts of crystallized PLA domains, which favored nucleating following crystallization of PCL phase. In addition, the presence of ChNCs did not strongly influence the microphase-segregated structure of PCL-b-PLA, and had good reinforcements to matrix copolymer. The selective nucleation ability of ChNCs reported in this study is valuable for regulating the structures and properties of nanocomposites based on the ChNCs-filled aliphatic diblock copolyester with double crystalline blocks.

Structural characterization and antioxidant activity of polysaccharide from Rhodomyrtus tomentosa berry

This study explored the structural properties and in vitro antioxidant activity of polysaccharide (RTP-1) from Rhodomyrtus tomentosa berry. The average molecular weight of RTP-1 is 11.638 kDa. Structural characterization revealed that the main chain of RTP-1 composed of 4,6)-β-D-Manp-(1 → and 6)-β-D-Manp-(1 → linkages, and the branched chain is the D-Galp-(1 → attached to the O-6 position of the glycan residue →4,6)-β-D-Manp-(1→). There is no triple helix structure in RTP-1. X-ray diffractometer results showed that RTP-1 is an amorphous semi-crystalline polymer with a characteristic "bun" shaped peak and a crystalline region at 20.42°. Atomic force microscopy results revealed that the average height of RTP-1 was 5.52 nm. The scanning electron microscopy results showed that RTP-1 exhibited a rough surface with numerous tiny pores. Thermo-gravimetry analysis and differential scanning colorimeter results revealed that RTP-1 was extremely thermally stable. The RTP-1 exhibited excellent 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS), and OH radical scavenging activity.

Chemical characterization, antioxidant activity and activation of macrophages RAW264.7 via MAPK signaling pathway of the exopolysaccharide from Penicillium EF-2

BACKGROUND

Microbial exopolysaccharides represent a significant source of polysaccharides, with their production unconstrained by temporal or spatial limitations. Penicillium, a filamentous fungus widely recognized for its medicinal food applications, is known to produce exopolysaccharides that exhibit cancer-inhibitory properties.

RESULTS

In the present study, exopolysaccharides from Penicillium EF-2 (EPS) were extracted and structurally characterized using ion chromatograph, infrared spectroscopy and NMR. The in vitro antioxidant and immunomodulatory activities were also investigated. EPS has a molecular weight of 111.47 kDa, is primarily composed of mannose, glucose and galactose, possesses a crystalline region, and exhibits excellent thermal properties. In free radical scavenging assays, EPS demonstrated robust in vitro antioxidant activity. Furthermore, EPS activated the mitogen-activated protein kinase pathway, enhancing the immunomodulatory capacity of macrophages.

CONCLUSION

EPS has excellent antioxidant and biological activities. The present study provides a theoretical basis for the utilization of EPS and offers new ideas for active sources of Penicillium fermented foods. © 2025 Society of Chemical Industry.

Preparation and characterization of microcrystalline cellulose from rice bran

BACKGROUND

Rice bran, a by-product of rice processing, has not been fully utilized except for the small amount used for raising animals. The raw material source requirements of microcrystalline cellulose are becoming increasingly extensive. However, the characteristics of preparing microcrystalline cellulose from rice bran have not been reported, which limits the application of rice bran.

RESULTS

Microcrystalline cellulose was obtained from rice bran by alkali treatment, delignification, bleaching and acid hydrolysis. The morphology, particle size distribution, degree of polymerization, crystallinity, and thermal stability of rice bran microcrystalline cellulose were analyzed. The chemical compositions, scanning electron microscopy and Fourier-transform infrared analysis for rice bran microcrystalline cellulose showed that the lignin and hemicellulose were successfully removed from the rice bran fiber matrix. The morphology of rice bran microcrystalline cellulose was shown to be of a short rod-shaped porous structure with an average diameter of 65.3 μm. The polymerization degree of rice bran microcrystalline cellulose was 150. The X-ray diffraction pattern of rice bran microcrystalline cellulose showed the characteristic peak of natural cellulose (type I), and its crystallization index was 71%. The rice bran microcrystalline cellulose may be used in biological composites with temperatures between 150 °C and 250 °C.

CONCLUSION

These results suggest the feasibility of using rice bran as a low-price source of microcrystalline cellulose. © 2024 Society of Chemical Industry.

In situ synthesis of ultrafine Cu(ii) metal immobilized on pectin hydrogel, modified by a CoFe2O4/Pr-SO3H nanocomposite as a green catalyst for reduction of nitro compounds and synthesis of 1H-tetrazoles

Synthesis of 5-substituted 1H-tetrazoles and reduction of a variety of nitro compounds presents a promising solution for the pharmaceutical and agricultural industries. However, the development of green catalysts with superior catalytic performance for this reaction remains a significant challenge. This research introduces a green protocol for the in situ creation of ultrafine Cu(ii) metal immobilized on the surface of pectin hydrogel (HPEC), modified by a CoFe2O4/Pr-SO3H magnetic nanocomposite, enabling the synthesis of tetrazoles and reduction of nitro compounds. This catalyst exhibits superior catalytic performance under green reaction conditions, short reaction time, catalyst separation, and thermal stability. The heterogeneous catalyst's structure and composition were thoroughly analyzed using various techniques such as FT-IR, FE-SEM, VSM, ICP-OES, TGA, XRD, BET, EDX, and X-ray mapping.

Cellulose-Based Sorbents: A Comprehensive Review of Current Advances in Water Remediation and Future Prospects

Cellulose-based sorbents are promising materials for wastewater treatment due to their environmental friendliness, biodegradability, and high sorption capacity. This paper presents an overview of cellulose modification methods, including carboxylation, amination, oxidation, graphene, and plasma treatments, as well as combined approaches. Their effect on key physicochemical properties, such as porosity, morphology, and chemical stability, is considered. Examples from the literature confirm the effectiveness of modified cellulose sorbents in removing heavy metal ions and organic pollutants from wastewater. The analysis shows that combined methods allow for creating materials with improved characteristics that are resistant to extreme operating conditions. The main advantages and disadvantages of cellulose sorbents, as well as challenges associated with their scalability and cost-effectiveness, are discussed. The paper emphasizes the importance of further research to advance these materials as a key element of sustainable water treatment technologies.

Polysaccharide-Based Hydrogels for Advanced Biomedical Engineering Applications

In recent years, numerous applications of hydrogels using polysaccharides have evolved, benefiting from their widespread availability, excellent biodegradability, biocompatibility, and nonpoisonous nature. These natural polymers are typically sourced from renewable materials or from manufacturing processes, contributing collaboratively to waste management and demonstrating the potential for enhanced and enduring sustainability. In the field of novel bioactive molecule carriers for biotherapeutics, natural polymers are attracting attention due to their inherent properties and adaptable chemical structures. These polymers offer versatile matrices with a range of architectures and mechanical properties, while retaining the bioactivity of incorporated biomolecules. However, conventional polysaccharide-based hydrogels suffer from inadequate mechanical toughness with large swelling properties, which prohibit their efficacy in real-world applications. This review offers insights into the latest advancements in the development of diverse polysaccharide-based hydrogels for biotherapeutic administrations, either standalone or in conjunction with other polymers or drug delivery systems, in the pharmaceutical and biomedical fields.

Microwave-assisted extraction of polysaccharides from Micromelum minutum leaves using citric acid monohydrate-glycerol based deep eutectic solvents and evaluation of biological activities

BACKGROUND

The extraction of polysaccharides using an acidic extraction media has been extensively reported, highlighting its effectiveness in yielding high-quality polysaccharides. A higher concentration of acidic solution could hydrolyze the structure of polysaccharide, while a low concentration reduces the extraction efficiency. Despite this challenges, deep eutectic solvents (DES) were introduced as an alternative extraction medium due to additional interactions such as inter and intra-molecular interactions, Van de Waals, hydrogen bond, and electrostatic interactions, which could improve the polysaccharide extraction efficiency and biological activities. Furthermore, the extraction conditions such as extraction medium and extraction parameters could affect the properties of polysaccharides as well as influence their structure-activity relationship for biological activities.

RESULTS

The result showed that the microwave-assisted extraction of Micromelum minutum leaf polysaccharide (MMLP) using DES as an extraction media (MMLP-DES) gave a higher yield (improvement of 101.20 %) than citric acid monohydrate (CAM) (MMLP-CAM) and required a lower percentage of microwave power (19.83 % less) and time (0.78 min less). The properties of MMLPs significantly differ based on their pH, molecular weight, viscosity, degree of esterification and monosaccharide molar ratio which influenced the biological activities. Compared to MMLP-CAM, MMLP-DES had a more branched and less linear structure. The bioactivities study revealed that MMLP-DES exhibited higher antioxidant and anti-α-amylase activities (i.e.

, DPPH

74.52 %, FRAP: 2.87 mM FeSO4 and α-amylase inhibition: 86.23 %) compared to MMLP-CAM (i.e.

, DPPH

49.33 %, FRAP: 1.49 mM FeSO4, and α-amylase inhibition: 81.76 %). The mechanism and structure-activity relationship of MMLPs on bioactivities were also hypothesized.

SIGNIFICANCE

Based on our previous study, the citric acid monohydrate-glycerol based DES as an extraction medium has enhanced the extraction yield of polysaccharides from M. minutum. This study highlights the DES combined with microwave-assisted extraction to improve the yield of MMLP and evaluate the biological activities compared to CAM as a classical solvent. In conclusion, the DES showed the advantages for extraction of polysaccharides with desired biological activities.

Star anise (Illicium verum Hook. F.) polysaccharides: Potential therapeutic management for obesity, hypertension, and diabetes

This study explores the extraction of polysaccharides from star anise (Illicium verum Hook. f.) with its anti-obesity, antihypertensive, antidiabetic, and antioxidant properties. The aim is to optimize the extraction conditions of star anise polysaccharides (SAP) utilizing propane alcohols-based deep eutectic solvents and microwave-assisted methods. The optimized conditions resulted in an extraction yield of 5.14%. The characteristics of acidic pectin-like SAP, including high viscosity (44.86 mPa s), high oil-holding capacity (14.39%), a high degree of esterification (72.53%), gel-like properties, highly amorphous, a high galacturonic acid concentration, and a highly branching size polysaccharide structure, significantly contribute to their potent inhibition of pancreatic lipase (86.67%), angiotensin-converting enzyme (73.47%), and α-glucosidase (82.33%) activities as well as to their antioxidant properties of azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS, 34.94%) and ferric ion reducing antioxidant power (FRAP, 0.56 mM FeSO4). Therefore, SAP could be used as a potential therapeutic agent for obesity, hypertension, and diabetes mellitus management.

Genome-guided isolation of the hyperthermophilic aerobe Fervidibacter sacchari reveals conserved polysaccharide metabolism in the Armatimonadota

Few aerobic hyperthermophilic microorganisms degrade polysaccharides. Here, we describe the genome-enabled enrichment and optical tweezer-based isolation of an aerobic polysaccharide-degrading hyperthermophile, Fervidibacter sacchari, previously ascribed to candidate phylum Fervidibacteria. F. sacchari uses polysaccharides and monosaccharides for growth at 65-87.5 °C and expresses 191 carbohydrate-active enzymes (CAZymes) according to RNA-Seq and proteomics, including 31 with unusual glycoside hydrolase domains (GH109, GH177, GH179). Fluorescence in-situ hybridization and nanoscale secondary ion mass spectrometry confirmed rapid assimilation of 13C-starch in spring sediments. Purified GHs were optimally active at 80-100 °C on ten different polysaccharides. Finally, we propose reassigning Fervidibacteria as a class within phylum Armatimonadota, along with 18 other species, and show that a high number and diversity of CAZymes is a hallmark of the phylum, in both aerobic and anaerobic lineages. Our study establishes Fervidibacteria as hyperthermophilic polysaccharide degraders in terrestrial geothermal springs and suggests a broad role for Armatimonadota in polysaccharide catabolism.

Overcoming Biopotency Barriers: Advanced Oral Delivery Strategies for Enhancing the Efficacy of Bioactive Food Ingredients

Bioactive food ingredients contribute to the promotion and maintenance of human health and wellbeing. However, these functional ingredients often exhibit low biopotency after food processing or gastrointestinal transit. Well-designed oral delivery systems can increase the ability of bioactive food ingredients to resist harsh environments inside and outside the human body, as well as allow for controlled or triggered release of bioactives to specific sites in the gastrointestinal tract or other tissues and organs. This review presents the characteristics of common bioactive food ingredients and then highlights the barriers to their biopotency. It also discusses various oral delivery strategies and carrier types that can be used to overcome these biopotency barriers, with a focus on recent advances in the field. Additionally, the advantages and disadvantages of different delivery strategies are highlighted. Finally, the current challenges facing the development of food-grade oral delivery systems are addressed, and areas where future research can lead to new advances and industrial applications of these systems are proposed.

Chitosan-naphthalimide probes for dual channel recognition of HClO and H2S in cells and their application in photodynamic therapy

The combination of bio-imaging with photodynamic therapy (PDT) to accomplish theranostics is promising in cancer treatment. Three chitosan-naphthalimide probes were studied in this work. 4-(5-Bromothiophen-2-yl)-1,8-naphthalic anhydride was first synthesized, and then reacted with chitosan to obtain the macromolecules (CS-N-Br). The recognition group thiomorpholine or its derivatives were introduced into CS-N-Br to obtain nano-probes (CS-N-ML, CS-N-BSZ, CS-N-FSQ) eventually. The studies revealed that CS-N-ML and CS-N-FSQ exhibit high selectivity and can specifically recognize HClO and H2S. CS-N-ML and CS-N-FSQ can perform exogenous and endogenous confocal imaging of HClO and H2S in cells also. CS-N-ML's ability to target lysosomes positions indicated it could act as a lysosome-specific probe. It was discovered that the probes generate superoxide anions (O2•-) via a Type I mechanism. This discovery endows the probes with high photosensitizing activity even under hypoxic conditions. There is a positive correlation between the extent of the conjugated system and the photosensitivity of the probes, indicating that an enhanced conjugation leads to increased photosensitivity. Upon light irradiation, the probes generate ROS within HeLa cells. These results suggested that these probes can achieve theranostics for diseases associated with abnormal levels of HClO and H2S.

Propolis ethanol extract functionalized chitosan/Tenebrio molitor larvae protein film for sustainable active food packaging

The application of novel insect proteins as future food resources in the food field has attracted more and more attention. In this study, a biodegradable antibacterial food packaging material with beneficial mechanical properties was developed using Tenebrio molitor larvae protein (TMP), chitosan (CS) and propolis ethanol extract (PEE) as raw materials. PEE was uniformly dispersed in the film matrix and the composite films showed excellent homogeneity and compatibility. There are strong intermolecular hydrogen bond interactions between CS, TMP, and PEE in the films, which exhibit the structure characteristics of amorphous materials. Compared with CS/TMP film, the addition of 3 % PEE significantly enhanced the elongation at break (34.23 %), water vapor barrier property (22.94 %), thermal stability (45.84 %), surface hydrophobicity (20.25 %), and biodegradability of the composite film. The composite film has strong antioxidant and antimicrobial properties, which were enhanced with the increase of PEE content. These biodegradable films offer an eco-friendly end-of-life option when buried in soil. Composite films can effectively delay the spoilage of strawberries and extend the shelf life of strawberries. Biodegradable active packaging film developed with insect protein and chitosan can be used as a substitute for petroleum-based packaging materials, and has broad application prospects in the field of fruits preservation.

Extraction and characterization of Bougainvillea glabra fibers: A study on chemical, physical, mechanical and morphological properties

Bougainvillea glabra fibers (BGFs) present a promising avenue for sustainable material development owing to their abundance and favorable properties. This study entails a thorough investigation into the composition, physical characteristics, mechanical behavior, structural properties, thermal stability, and hydrothermal absorption behavior of BGFs. Chemical analysis reveals the predominant presence of cellulose (68.92 %), accompanied by notable proportions of hemicellulose (12.64 %), lignin (9.56 %), wax (3.72 %), moisture (11.78 %), and ash (1.75 %). Physical measurements ascertain a mean fiber diameter of approximately 232.63 ± 8.59 μm, while tensile testing demonstrates exceptional strength, with stress values ranging from 120 ± 18.26 MPa to a maximum of 770 ± 23.19 MPa at varying strains. X-ray diffraction (XRD) elucidates a crystalline index (CI) of 68.17 % and a crystallite size (CS) of 9.42 nm, indicative of a well-defined crystalline structure within the fibers. Fourier-transform infrared spectroscopy (FTIR) confirms the presence of characteristic functional groups associated with cellulose, hemicellulose, wax, and water content. Thermogravimetric analysis (TGA) delineates distinct thermal degradation stages, with onset temperatures ranging from 102.76 °C for water loss to 567.55 °C for ash formation. Furthermore, hydrothermal absorption behavior exhibits temperature and time-dependent trends, with absorption percentages ranging from 15.26 % to 32.19 % at temperatures between 30 °C and 108 °C and varying exposure durations. These comprehensive findings provide essential insights into the properties and potential applications of BGFs in diverse fields such as bio-composites, textiles, and environmentally friendly packaging solutions.

Tailor-Made Polysaccharides for Biomedical Applications

Polysaccharides (PSAs) are carbohydrate-based macromolecules widely used in the biomedical field, either in their pure form or in blends/nanocomposites with other materials. The relationship between structure, properties, and functions has inspired scientists to design multifunctional PSAs for various biomedical applications by incorporating unique molecular structures and targeted bulk properties. Multiple strategies, such as conjugation, grafting, cross-linking, and functionalization, have been explored to control their mechanical properties, electrical conductivity, hydrophilicity, degradability, rheological features, and stimuli-responsiveness. For instance, custom-made PSAs are known for their worldwide biomedical applications in tissue engineering, drug/gene delivery, and regenerative medicine. Furthermore, the remarkable advancements in supramolecular engineering and chemistry have paved the way for mission-oriented biomaterial synthesis and the fabrication of customized biomaterials. These materials can synergistically combine the benefits of biology and chemistry to tackle important biomedical questions. Herein, we categorize and summarize PSAs based on their synthesis methods, and explore the main strategies used to customize their chemical structures. We then highlight various properties of PSAs using practical examples. Lastly, we thoroughly describe the biomedical applications of tailor-made PSAs, along with their current existing challenges and potential future directions.

A review of endogenous non-starch components in cereal matrix: spatial distribution and mechanisms for inhibiting starch digestion

As compared with exogenous components, non-starch components (NSCS), such as proteins, lipids, non-starch polysaccharides (NSPs), and polyphenols, inherently present in cereals, are more effective at inhibiting starch digestibility. Existing research has mostly focused on complex systems but overlooked the analysis of the in-situ role of the NSCS. This study reviews the crucial mechanisms by which endogenous NSCS inhibit starch digestion, emphasizing the spatial distribution-function relationship. Starch granules are filled with pores/channels-associated proteins and lipids, embedding in the protein matrix, and maintained by endosperm cell walls. The potential starch digestion inhibition of endogenous NSCS is achieved by altering starch gelatinization, molecular structure, digestive enzyme activity, and accessibility. Starch gelatinization is constrained by endogenous NSCS, particularly cell wall NSPs and matrix proteins. The stability of the starch crystal structure is enhanced by the proteins and lipids distributed in the starch granule pores and channels. Endogenous polyphenols greatly inhibit digestive enzymes and participate in the cross-linking of NSPs in the cell wall space, which together constitute a physical barrier that hinders amylase diffusion. Additionally, the spatial entanglement of NSCS and starch under heat and non-heat processing conditions reduces starch accessibility. This review provides novel evidence for the health benefits of whole cereals.

Organized assembly of chitosan into mechanically strong bio-composite by introducing a recombinant insect structural protein OfCPH-1

Chitosan, known for its appealing biological properties in packaging and biomedical applications, faces challenges in achieving a well-organized crystalline structure for mechanical excellence under mild conditions. Herein, we propose a facile and mild bioengineering approach to induce organized assembly of amorphous chitosan into mechanically strong bio-composite via incorporating a genetically engineered insect structural protein, the cuticular protein hypothetical-1 from the Ostrinia furnacalis (OfCPH-1). OfCPH-1 exhibits high binding affinity to chitosan via hydrogen-bonding interactions. Simply mixing a small proportion (0.5 w/w%) of bioengineered OfCPH-1 protein with acidic chitosan precursor induces the amorphous chitosan chains to form fibrous networks with hydrated chitosan crystals, accompanied with a solution-to-gel transition. We deduce that the water shell destruction driven by strong protein-chitosan interactions, triggers the formation of well-organized crystalline chitosan, which therefore offers the chitosan with significantly enhanced swelling resistance, and strength and modulus that outperforms that of most reported chitosan-based materials as well as petroleum-based plastics. Moreover, the composite exhibits a stretch-strengthening behavior similar to the training living muscles on cyclic load. Our work provides a route for harnessing the OfCPH-1-chitosan interaction in order to form a high-performance, sustainably sourced bio-composite.

Conversion of β-1,6-Glucans to Gentiobiose using an endo-β-1,6-Glucanase PsGly30A from Paenibacillus sp. GKG

A plethora of di- and oligosaccharides isolated from the natural sources are used in food and pharmaceutical industry. An enzymatic hydrolysis of fungal cell wall β-glucans is a good alternative to produce the desired oligosaccharides with different functionalities, such as the flavour enhancer gentiobiose. We have previously identified PsGly30A as a potential yeast cell wall degrading β-1,6-glycosidase. The aim of this study is to characterise the PsGly30A enzyme, a member of the GH30 family, and to evaluate its suitability for the production of gentiobiose from β-1,6-glucans. An endo-β-1,6-glucanase PsGly30A encoding gene from Paenibacillus sp. GKG has been cloned and overexpressed in Escherichia coli. The recombinant enzyme has been active towards pustulan and yeast β-glucan, but not on laminarin from the Laminaria digitata, confirming the endo-β-1,6-glucanase mode of action. The PsGly30A shows the highest activity at pH 5.5 and 50 °C. The specific activity of PsGly30A on pustulan (1262±82 U/mg) is among the highest reported for GH30 β-1,6-glycosidases. Moreover, gentiobiose is the major reaction product when pustulan, yeast β-glucan or yeast cell walls have been used as a substrate. Therefore, PsGly30A is a promising catalyst for valorisation of the yeast-related by-products.

From Nature-Sourced Polysaccharide Particles to Advanced Functional Materials

Polysaccharides constitute over 90% of the carbohydrate mass in nature, which makes them a promising feedstock for manufacturing sustainable materials. Polysaccharide particles (PSPs) are used as effective scavengers, carriers of chemical and biological cargos, and building blocks for the fabrication of macroscopic materials. The biocompatibility and degradability of PSPs are advantageous for their uses as biomaterials with more environmental friendliness. This review highlights the progresses in PSP applications as advanced functional materials, by describing PSP extraction, preparation, and surface functionalization with a variety of functional groups, polymers, nanoparticles, and biologically active species. This review also outlines the fabrication of PSP-derived macroscopic materials, as well as their applications in soft robotics, sensing, scavenging, water harvesting, drug delivery, and bioengineering. The paper is concluded with an outlook providing perspectives in the development and applications of PSP-derived materials.

Preparation methods, structural characteristics, and biological activity of polysaccharides from Platycodon grandiflorus

Platycodon grandiflorus (P. grandiflorus), a traditional Chinese medicinal herb used for both medicine and food, has a long history of treating respiratory infections, bronchitis, pneumonia, and other lung-related diseases. The therapeutic effects of P. grandiflorus are attributed to its chemical components, including polysaccharides. Among these components, Platycodon grandiflorus polysaccharides (PGP) are recognized as one of the most important and abundant active ingredients, exhibiting various biological activities such as prebiotic, antioxidant, antiviral, anticancer, antiangiogenic, and immune regulatory properties. Incorporating the principles of traditional Chinese medicine, carrier concepts, and modern targeted drug delivery technologies, PGP can influence the target sites and therapeutic effects of other drugs while also serving as a drug carrier for targeted and precise treatments. Therefore, it is essential to provide a comprehensive review of the extraction, separation, purification, physicochemical properties, and biological activities of PGP. In the future, by integrating new concepts, technologies, and processes, further references and guidance can be provided for the comprehensive development of PGP. This will contribute to the advancement of P. grandiflorus in various fields such as pharmaceuticals, health products, and food.

Traditional uses, phytochemistry, pharmacology, applications, and quality control of Gastrodia elata Blume: A comprehensive review

ETHNOPHARMACOLOGICAL RELEVANCE

Gastrodia elata Blume (G. elata) has a long historical application in Asian countries and its tubers, seeds, and stalks are capable of being utilized for medicine, food, or health care products.

AIM OF THE REVIEW

This study aimed to offer a systematic and up-to-date analysis of the current review of the G. elata research advances in traditional uses, phytochemistry, pharmacology, applications, and quality control, as well as a scientific reference for the development and utilization of this plant.

MATERIALS AND METHODS

Electronic databases including PubMed, Web of Science, Google Scholar, ScienceDirect, SciFinder, and CNKI were used for the collection of publications on G. elata. The following keywords of G. elata were used truncated with other relevant topic terms, such as phenolic compounds, polysaccharides, glycosides, neuroprotection, learning and memory improvement effects, cardioprotection, applications, and quality control.

RESULTS AND CONCLUSIONS

Approximately 134 chemical components mainly categorizing as phenolic compounds, polysaccharides, glycosides, organic acids, and sterols were reported from this plant. Moreover, preclinical studies indicated that G. elata performs several functions, including neuroprotection, learning and memory improvement effects, cardioprotection, vaso-modulatory effect, anti-depression, anti-cancer, and other effects. Currently, G. elata has been widely applied to clinics and foods. The available literature shows that the quality of G. elata might be affected by factors such as origin, fungus, and harvest time, which will have an impact on the drug efficacy. According to past research, G. elata is a potential medicinal and edible plant with several active components and pharmacological activity that has a high application value in medicine and the food business. Nevertheless, few studies have concentrated on characterization of polysaccharides structure and study of non-medicinal parts, implying that further comprehensive research on its polysaccharides structure and non-medicinal parts is critical for full utilization of resources of G. elata.

Interaction mechanism between luteoloside and corn silk glycans and the synergistic role in hypoglycemic activity

As the two most principal active substances in the corn silk, polysaccharides and flavonoids, the mechanism of interaction between them has been a topic of intense research. This study provides an in-depth investigation of the interaction mechanism between corn silk glycans and luteoloside (LUT) and the synergistic role that result from this interaction. The interaction mechanism was evaluated by isothermal titration calorimetry (ITC) and circular dichroism (CD), and the synergistic role was evaluated by the expression of glucose transporters (GLUT-1), insulin secretion and surface plasmon resonance (SPR). CD and ITC results indicated that the interaction between CSGs and LUT mainly driven by the Cotton effects, enthalpy and entropy-driven. This interaction precipitated the formation of complexes (CSGs/LUT complexes) between corn silk glycans (CSGs) with four different molecular weights and luteoloside (LUT). Furthermore, the CSGs and LUT play a synergistic role in glucose regulation through GLUT-1 expression and insulin secretion experiments, compared to single luteoloside group.

Comprehensive investigation into the effects of yeast dietary fiber and temperature on konjac glucomannan/kappa-carrageenan for the development of fat analogs

In this study, yeast dietary fiber (YDF) was incorporated into konjac glucomannan/kappa-carrageenan (KGM/κ-KC) for the development of fat analogs, and the impact of YDF on the gelation properties and behavior of KGM/κ-KC composite gels was assessed. YDF improved the composite gel whiteness value, and affected the mechanical properties of the composite gel, especially enhancing its hardness, and decreasing its chewiness, elasticity, and gel strength, making it more similar to porcine back fat. When the yeast dietary fiber content was 0.033 g/mL and the heating temperature was 80 °C (T80-2), the textural properties of the composite gel were closest to porcine back fat. The frequency sweep results suggested that YDF incorporation led to enhancement of the intermolecular interaction and intermixing and interaction among more easily at higher processing temperatures (80 °C and 90 °C). By scanning electron microscopy, the fatty surface of porcine back fat was flat and covered with a large amount of oil, while KGM/κ-KC/YDF composite gels developed a dense, stacked network structure. YDF caused more fragmented, folded, and uneven structures to emerge. Overall, YDF could influence the gel behavior of KGM/κ-KC composite gels, and change their colors and mechanical properties. This work could serve as a guide for preparing fat analogs with KGM/κ-KC composite gels.

Recent advances in anti-inflammatory active components and action mechanisms of natural medicines

Inflammation is a series of reactions caused by the body's resistance to external biological stimuli. Inflammation affects the occurrence and development of many diseases. Anti-inflammatory drugs have been used widely to treat inflammatory diseases, but long-term use can cause toxic side-effects and affect human functions. As immunomodulators with long-term conditioning effects and no drug residues, natural products are being investigated increasingly for the treatment of inflammatory diseases. In this review, we focus on the inflammatory process and cellular mechanisms in the development of diseases such as inflammatory bowel disease, atherosclerosis, and coronavirus disease-2019. Also, we focus on three signaling pathways (Nuclear factor-kappa B, p38 mitogen-activated protein kinase, Janus kinase/signal transducer and activator of transcription-3) to explain the anti-inflammatory effect of natural products. In addition, we also classified common natural products based on secondary metabolites and explained the association between current bidirectional prediction progress of natural product targets and inflammatory diseases.

Novel Transcription Factor CXRD Regulates Cellulase and Xylanase Biosynthesis in Penicillium oxalicum under Solid-State Fermentation

Penicillium oxalicum produces an integrated, extracellular cellulase and xylanase system, strictly regulated by several transcription factors. However, the understanding of the regulatory mechanism of cellulase and xylanase biosynthesis in P. oxalicum is limited, particularly under solid-state fermentation (SSF) conditions. In our study, deletion of a novel gene, cxrD (cellulolytic and xylanolytic regulator D), resulted in 49.3 to 2,230% enhanced production of cellulase and xylanase, except for 75.0% less xylanase at 2 days, compared with the P. oxalicum parental strain, when cultured on solid medium containing wheat bran plus rice straw for 2 to 4 days after transfer from glucose. In addition, the deletion of cxrD delayed conidiospore formation, leading to 45.1 to 81.8% reduced asexual spore production and altered mycelial accumulation to various extents. Comparative transcriptomics and real-time quantitative reverse transcription-PCR found that CXRD dynamically regulated the expression of major cellulase and xylanase genes and conidiation-regulatory gene brlA under SSF. In vitro electrophoretic mobility shift assays demonstrated that CXRD bound to the promoter regions of these genes. The core DNA sequence 5'-CYGTSW-3' was identified to be specifically bound by CXRD. These findings will contribute to understanding the molecular mechanism of negative regulation of fungal cellulase and xylanase biosynthesis under SSF. IMPORTANCE Application of plant cell wall-degrading enzymes (CWDEs) as catalysts in biorefining of lignocellulosic biomass into bioproducts and biofuels reduces both chemical waste production and carbon footprint. The filamentous fungus Penicillium oxalicum can secrete integrated CWDEs, with potential for industrial application. Solid-state fermentation (SSF), simulating the natural habitat of soil fungi, such as P. oxalicum, is used for CWDE production, but a limited understanding of CWDE biosynthesis hampers the improvement of CWDE yields through synthetic biology. Here, we identified a novel transcription factor CXRD, which negatively regulates the biosynthesis of cellulase and xylanase in P. oxalicum under SSF, providing a potential target for genetic engineering to improve CWDE production.

Heterologous expression and characterization of novel GH12 β-glucanase and AA10 lytic polysaccharide monooxygenase from Streptomyces megaspores and their synergistic action in cellulose saccharification

BACKGROUND

The combination of cellulase and lytic polysaccharide monooxygenase (LPMO) is known to boost enzymatic saccharification of cellulose. Although the synergy between cellulases (GH5, 6 or 7) and LPMOs (AA9) has been extensively studied, the interplay between other glycoside hydrolase and LPMO families remains poorly understood.

RESULTS

In this study, two cellulolytic enzyme-encoding genes SmBglu12A and SmLpmo10A from Streptomyces megaspores were identified and heterologously expressed in Escherichia coli. The recombinant SmBglu12A is a non-typical endo-β-1,4-glucanase that preferentially hydrolyzed β-1,3-1,4-glucans and slightly hydrolyzed β-1,4-glucans and belongs to GH12 family. The recombinant SmLpmo10A belongs to a C1-oxidizing cellulose-active LPMO that catalyzed the oxidation of phosphoric acid swollen cellulose to produce celloaldonic acids. Moreover, individual SmBglu12A and SmLpmo10A were both active on barley β-1,3-1,4-glucan, lichenan, sodium carboxymethyl cellulose, phosphoric acid swollen cellulose, as well as Avicel. Furthermore, the combination of SmBglu12A and SmLpmo10A enhanced enzymatic saccharification of phosphoric acid swollen cellulose by improving the native and oxidized cello-oligosaccharides yields.

CONCLUSIONS

These results proved for the first time that the AA10 LPMO was able to boost the catalytic efficiency of GH12 glycoside hydrolases on cellulosic substrates, providing another novel combination of glycoside hydrolase and LPMO for cellulose enzymatic saccharification.

Cellulose based self-healing hydrogel through Boronic Ester connections for wound healing and antitumor applications

The application of biodegradable hydrogels in medical field has drawn great attention because their networked structure provided ideal spaces for drug loading and cell growth. In this research, the boronic acid was coupled onto carboxyethyl cellulose (CMC) to synthesize boronic acid grafted CMC (CMC-BA) conveniently and self-healing hydrogel was fabricated with polyvinyl alcohol (PVA) crosslinking through dynamic boronic ester bond. The CMC-BA/PVA hydrogel showed good biocompatibility and could be degraded by cellulase and in vivo. The hydrogel formed fast fit for localized injection to cover the irregular wounds and localize the antitumor drugs to the tumor site. The in vivo wound repairing experiment revealed the hydrogel could form airtight adhesion to the wound site to reduce blood loss and accelerate the wound repairing rate. The hydrogel as a drug release carrier also reduced the acute in vivo toxicity of DOX with antitumor performance well preserved through a controlled release profile. Based on the above advantages, the CMC-based hydrogel with boronic ester connection should have great potential in biomedical areas with profitable future.

Ultrasonication significantly enhances grafting efficiency of chitosan-ferulic acid conjugate and improves its film properties under Fenton system

Ultrasonication (US)-assisted Fenton-system (US-Fenton) with different US time was developed for synthesizing chitosan (CS)-ferulic acid (FA) conjugates. The optimal US-Fenton for a suitable time was selected for preparing a film with CS-FA conjugate and its structural, functional, rheological, and physical properties were also investigated. Compared with Fenton-system, US-Fenton enhanced the grafting ratio of the conjugates, which increased firstly and then decreased as US time. The conjugate obtained by US-Fenton for 1 min (FUS1) possessed the highest grafting ratio (121.28 mg FA/g) and its grafting time was also shortened from 12 h to 1 min contrasted with Fenton grafted method. Structural characterization results showed that FA was conjugated on CS via ester and amide bonds with decreased crystallinity. Scanning electron microscopy and molecular weight analysis indicated that the degradation degree of CS-FA conjugates increased with US time. The DPPH and ABTS radical-scavenging activities of FUS1 were the closest to ascorbic acid, and it also showed the best antibacterial effect among the test conjugates. Accordingly, FUS1 was selected to obtain the film for contrasting with CS film. FUS1 film solution exhibited a decreased viscosity. In comparison to CS film, UV transmittance of FUS1 film approached zero, and its moisture, oxygen, and carbon dioxide permeabilities significantly decreased (P < 0.05). Moreover, its water solubility and tensile strength increased by 58.09% and 25.72% than those of CS film, respectively. Therefore, US-Fenton for 1 min could be a promising method for efficiently preparing active food package materials and FUS1 film possessed broad application prospects.

Extraction and characterization of hyaluronic acid from the eyeball of Nile Tilapia (Oreochromis niloticus)

Hyaluronic acid (HA) is a biopolymer of enormous value aggregation for in general industry. The vitreous humor of the eyeball from Nile tilapia contains appreciable amounts of hyaluronic acid. In this sense, the aim of this work was to extract and characterize hyaluronic acid from the eyeball of the Nile tilapia for biomedical applications, adding value to fish industry residues. The characterization by infra-red (FTIR), ¹³C nuclear magnetic resonance (NMR) and high performance liquid chromatography (HPLC) confirmed that hyaluronic acid was obtained. The gel permeation chromatography (GPC) showed that the obtained material presents a low molecular mass (37 KDa). Thermogravimetry (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) analysis showed that the materials present a thermal stability superior to the commercial hyaluronic acid from Streptococcus equi, with a partially crystalline character. The cytotoxicity assay (MTT method) with fibroblast cells (L929) demonstrated that the extracted biopolymer besides not being cytotoxic, was able to stimulate cell proliferation. Therefore, the hyaluronic acid extracted from this source of residue constitutes a product with biotechnological potential, which has adequate quality for wide biomedical applications.

Evaluation and characterization of starch nanoparticles for adsorption of urea from dialysates

Starch nanoparticles (SNPs) was produced from type-A, B and C native starches (corn, potato and Trichosanthes kirilowii pulp starches respectively), via the nanoprecipitation method. The SNPs showed different amylose contents, water contact angles, surface morphologies and urea clearance performances. In this work, to examine the parameters of SNPs that may change the urea adsorption capacity, urea adsorption performance in adsorption environments with different pH values, urea concentrations, and adsorption times was examined. Thereafter, the characteristics of SNPs were tested by water contact angle measurements (WCA), transmission electron microscopy, specific surface area measurements, gel permeation chromatography, and zeta potential analysis. The results showed that the Trichosanthes kirilowii pulp (C) SNPs show better adsorption than the corn (A) and potato (B) SNPs. The hydrophobicity of SNPs promotes the urea adsorption of the SNPs. Using grey relational analysis, it was found that WCA and Mn are the critical parameter affecting the adsorption performance, with WCA and Mn within the ranges of 31-33° and 1900-2100 kDa, respectively, were found to be the conditions for optimal urea adsorption.

Viscoelastic and Properties of Amphiphilic Chitin in Plasticised Polylactic Acid/Starch Biocomposite

The enhancement of the PLA thermomechanical properties is significant due to its suitability as a replacement for primary synthetic polymer use in diverse industrial production. The amphiphilic chitin was used as a compatibilizer in PLA/starch biocomposite. The properties of plasticised polylactic acid blended with starch, and amphiphilic chitin was studied for enhanced thermomechanical and viscoelastic properties. Chitin was modified using acetylated substitution reaction and blended with plasticised PLA/starch biocomposite. The biocomposite was prepared with combined compression and melt extrusion techniques. The biocomposite’s thermomechanical, thermal, mechanical, and morphological properties were studied using dynamic mechanical analysis, TGA-DSC, tensile test, and scanning electron microscopy. The storage and loss modulus were significantly enhanced with increased amphiphilic chitin content. Similarly, the single peak of tan delta showed good miscibility of the polymeric blend. Additionally, the modulus increases with frequency change from 1 Hz to 10 Hz. The thermal stability of the biocomposite was observed to be lower than the neat PLA. The tensile properties of the biocomposite increased significantly more than the neat PLA, with P4S4C having the highest tensile strength and modulus of 87 MPa and 7600 MPa. The SEM images show good miscibility with no significant void in the fractured surface. The viscoelastic properties of PLA were enhanced considerably with plasticizer and amphiphilic chitin with improved biodegradability. The properties of the biocomposite can be adapted for various industrial applications.

Green Polymer Nanocomposites for Skin Tissue Engineering

Fabrication of an appropriate skin scaffold needs to meet several standards related to the mechanical and biological properties. Fully natural/green scaffolds with acceptable biodegradability, biocompatibility, and physiological properties quite often suffer from poor mechanical properties. Therefore, for appropriate skin tissue engineering and to mimic the real functions, we need to use synthetic polymers and/or additives as complements to green polymers. Green nanocomposites (either nanoscale natural macromolecules or biopolymers containing nanoparticles) are a class of scaffolds with acceptable biomedical properties window (drug delivery and cardiac, nerve, bone, cartilage as well as skin tissue engineering), enabling one to achieve the required level of skin regeneration and wound healing. In this review, we have collected, summarized, screened, analyzed, and interpreted the properties of green nanocomposites used in skin tissue engineering and wound dressing. We particularly emphasize the mechanical and biological properties that skin cells need to meet when seeded on the scaffold. In this regard, the latest state of the art studies directed at fabrication of skin tissue and bionanocomposites as well as their mechanistic features are discussed, whereas some unspoken complexities and challenges for future developments are highlighted.

Polylysine for skin regeneration: A review of recent advances and future perspectives

There have been several attempts to find promising biomaterials for skin regeneration, among which polylysine (a homopolypeptide) has shown benefits in the regeneration and treatment of skin disorders. This class of biomaterials has shown exceptional abilities due to their macromolecular structure. Polylysine-based biomaterials can be used as tissue engineering scaffolds for skin regeneration, and as drug carriers or even gene delivery vectors for the treatment of skin diseases. In addition, polylysine can play a preservative role in extending the lifetime of skin tissue by minimizing the appearance of photodamaged skin. Research on polylysine is growing today, opening new scenarios that expand the potential of these biomaterials from traditional treatments to a new era of tissue regeneration. This review aims to address the basic concepts, recent trends, and prospects of polylysine-based biomaterials for skin regeneration. Undoubtedly, this class of biomaterials needs further evaluations and explorations, and many critical questions have yet to be answered.