Biochar as a support for nanocatalysts and other reagents: Recent advances and applications

Persulfate activation with biochar supported nanoscale zero- valent iron: Engineering application for effective degradation of NCB in soil

Nitrochlorobenzene (NCB) is very common in pesticide and chemical industries, which has become a major problem in soil environment. However, the remediation of NCB contaminated soil is received finite concern. Using biochar as a substrate for nanoscale-zero valent iron (nZVI/p-BC) to activate peroxodisulfate (PDS), a novel heterogeneous oxidative system had been applied in the current study to remediate NCB contaminants in soil. The degradation efficiencies and kinetics of m-NCB, p-NCB, and o-NCB by various systems were contrasted in soil slurry. Key factors including the dosage of nZVI/p-BC, the molar ratio of nZVI/PDS, initial pH and temperature on degradation of NCB were further examined. The results confirmed that the nZVI/p-BC/PDS displayed the remarkable performance for removing NCB compared with other systems. Higher temperature with nZVI/PDS molar ratio of 2:1 under the acidic condition favored the reduction of NCB. The treatment for NCB with optimal conditions were evaluated for the engineering application. The mechanism of nZVI/p-BC/PDS indicated that electron transfer between p-BC and nZVI was responsible for activation of PDS, generating active species (SO4•-, •OH and 1O2) via both the free and non-free radical pathways. Experimental results revealed prominent availability of nZVI/p-BC/PDS system in remediation of actual contaminated field by NCB.

Effectiveness of feeding different biochars on growth, digestibility, body composition, hematology and mineral status of the Nile tilapia, Oreochromis niloticus

Oreochromis niloticus fingerlings (5.15 ± 0.02 g; n = 315) were fed with different types of biochar (BC)-supplemented sunflower meal-based (SFM) diet to investigate the effects of various BC inclusions on their nutritional digestibility, body composition, hematology and mineral status for 60 days. Seven different diets were formulated based on the SFM based diet: one was a control (TD-I, CON) and the other six diets were supplemented with 2% BC derived from different sources. These BCs were derived from the following: cotton stick (CSBC, TD-II), wheat straw (WSBC, TD-III), corn cob (CCBC, TD-IV), house waste (HWBC, TD-V), grass waste (GWBC, TD-VI), and green waste (GwBC, TD-VII) biochar. There were three replicates for each test diet. Each tank had fifteen tilapia fingerlings, and they were fed with 5% of their live wet weight and twice daily. The outcomes showed that the supplementation of CCBC significantly elevated the growth, nutrient absorption, and body composition of the O. niloticus fingerlings (p < 0.05); with concomitant lowering of the quantity of nutrients released into the water bodies whereas HWBC gave negative impacts. The maximal mineral absorption efficiency (Ca, Na, K, Cu, Fe, P, and Zn) was achieved by the supplementation of 2% CCBC. All hematological parameters showed positive improvements (p < 0.05) with CCBC. Interestingly, CCBC significantly improved the growth, digestibility, body composition, hematology, and mineral status of O. niloticus.

Niobic acid as a support for microheterogeneous nanocatalysis of sodium borohydride hydrolysis under mild conditions

This study explores the stabilization by niobic acid, of Pt, Ni, Pd, and Au nanoparticles (NPs) for the efficient microheterogeneous catalysis of NaBH4 hydrolysis for hydrogen production. Niobic acid is the most widely studied Nb2O5 polymorph, and it is employed here for the first time for this key reaction relevant to green energy. Structural insights from XRD, Raman, and FTIR spectroscopies, combined with hydrogen production data, reveal the role of niobic acid's Brønsted acidity in its catalytic activity. The supported NPs showed significantly higher efficiency than the non-supported counterparts regarding turnover frequency, average hydrogen production rate, and cost. Among the tested NPs, PtNPs and NiNPs demonstrate the most favorable results. The data imply mechanism changes during the reaction, and the kinetic isotope assay indicates a primary isotope effect. Reusability assays demonstrate consistent yields over five cycles for PtNPs, although catalytic efficiency decreases, likely due to the formation of reaction byproducts.

Removal mechanism of Pb(ii) from soil by biochar-supported nanoscale zero-valent iron composite materials

As an adsorbent, biochar has a highly porous structure and strong adsorption capacity, and can effectively purify the environment. In response to the increasingly serious problem of heavy metal pollution in water, this study used nano zero valent iron and rice husk biochar to prepare a new type of magnetic sheet-like biochar loaded nano zero valent iron (BC-nZVI) composite material through rheological phase reaction, showing remarkable advantages such as low cost, easy preparation, and superior environmental remediation effect. The physical and chemical properties and structure of the material were extensively characterized using various methods such as HRTEM, XPS, FESEM, EDS, XRD, FTIR, and RAMAN. Concurrently, batch experiments were undertaken to assess the removal efficiency of Pb(ii) by BC-nZVI, with investigations into the influence of pH value, temperature, soil water ratio, and initial concentration of heavy metal ion solution on its removal efficiency. The results indicate that the removal of Pb(ii) by BC-nZVI reaches an equilibrium state after around 120 minutes. Under the conditions of pH 6, temperature 20 °C, soil water ratio 1 : 5, and BC-nZVI dosage of 1 g L-1, BC-nZVI can reduce the Pb(ii) content in wastewater with an initial concentration of 30 mg L-1 to trace levels, and the treatment time is about 120 minutes. The analysis of adsorption kinetics and isotherms indicates that the adsorption process of Pb(ii) by BC-nZVI adheres to the quasi-second-order kinetic model and Langmuir model, suggesting a chemical adsorption process. Thermodynamic findings reveal that the adsorption of Pb(ii) by BC-nZVI is spontaneous. Furthermore, BC-nZVI primarily accumulates Pb(ii) through adsorption co-precipitation. BC-nZVI serves as an eco-friendly, cost-effective, and highly efficient adsorbent, showing promising capabilities in mitigating Pb(ii) heavy metal pollution. Its recoverability and reusability facilitated by an external magnetic field make it advantageous for remediating and treating lead-contaminated sites.

Solar photocatalytic degradation of ciprofloxacin using biochar supported zinc oxide- tungsten oxide photocatalyst

Ciprofloxacin (CIP) is an antibiotic used to treat bacterial infections. It is not completely broken down during conventional wastewater treatment processes and can persist in the environment, leading to the development of antibiotic-resistant bacteria. This study focuses on the solar photocatalytic degradation CIP using biochar-supported photocatalysts. The photocatalysts developed by combining ZnO and WO3 in different ratios (1:2, 1:1, 2:1) were supported on hemp herd biochar. The photocatalyst made with a ratio of 2:1:1 of ZnO:WO3:biochar (Z2W1H) reported the highest CIP degradation efficiency of 87.3% and TOC removal efficiency of 43.1% at a catalyst dosage of 2 g/L, initial CIP concentration of 3 mg/L, and treatment time of 150 min. Subsequently, the effects of operating parameters on CIP degradation were investigated using central composite design (CCD). About 85.4% degradation efficiency of CIP was obtained at optimum conditions (pH ∼8.4, initial CIP concentration ∼4.4 mg/L, catalytic dosage ∼3.4 g/L) within 90 min. A quadradic model was developed to interpret the linear and interactive effect of operating parameters on the CIP degradation efficiency with 2.24-4.59% error. The adsorption-desorption study showed around 42.21% of adsorbed CIP was desorbed from Z2W1H. Scavenger studies demonstrated that the CIP breakdown was notably done by the superoxide radical (O2•-). The mechanism of CIP degradation was adsorption on biochar and subsequent degradation by photocatalyst. The prevalent degradation reactions such as C-N bond cleavage, decarboxylation, decarbonylation, defluorination, and ring opening lead to formation of various intermediates. The Z2W1H reusability test showed ~ 4.2% decrease in CIP removal efficiency after three cycles.

Pristine and modified biochar applications as multifunctional component towards sustainable future: Recent advances and new insights

Employing biomass for environmental conservation is regarded as a successful and environmentally friendly technique since they are cost-effective, renewable, and abundant. Biochar (BC), a thermochemically converted biomass, has a considerably lower production cost than the other conventional activated carbons. This material's distinctive properties, including a high carbon content, good electrical conductivity (EC), high stability, and a large surface area, can be utilized in various research fields. BC is feasible as a renewable source for potential applications that may achieve a comprehensive economic niche. Despite being an inexpensive and environmentally sustainable product, research has indicated that pristine BC possesses restricted properties that prevent it from fulfilling the intended remediation objectives. Consequently, modifications must be made to BC to strengthen its physicochemical properties and, thereby, its efficacy in decontaminating the environment. Modified BC, an enhanced iteration of BC, has garnered considerable interest within academia. Many modification techniques have been suggested to augment BC's functionality, including its adsorption and immobilization reliability. Modified BC is overviewed in its production, functionality, applications, and regeneration. This work provides a holistic review of the recent advances in synthesizing modified BC through physical, chemical, or biological methods to achieve enhanced performance in a specific application, which has generated considerable research interest. Surface chemistry modifications require the initiation of surface functional groups, which can be accomplished through various techniques. Therefore, the fundamental objective of these modification techniques is to improve the efficacy of BC contaminant removal, typically through adjustments in its physical or chemical characteristics, including surface area or functionality. In addition, this article summarized and discussed the applications and related mechanisms of modified BC in environmental decontamination, focusing on applying it as an ideal adsorbent, soil amendment, catalyst, electrochemical device, and anaerobic digestion (AD) promoter. Current research trends, future directions, and academic demands were available in this study.

Highly Efficient Transformation of Tar Model Compounds into Hydrogen by a Ni-Co Alloy Nanocatalyst During Tar Steam Reforming

Hydrogen (H2) production from coal and biomass gasification was considered a long-term and viable way to solve energy crises and global warming. Tar, generated as a hazardous byproduct, limited its large-scale applications by clogging and corroding gasification equipment. Although catalytic steam reforming technology was used to convert tar into H2, catalyst deactivation restricted its applicability. A novel nanocatalyst was first synthesized by the modified sol-gel method using activated biochar as the support, nickel (Ni) as the active component, and cobalt (Co) as the promoter for converting tar into H2. The results indicated that a high H2 yield of 263.84 g H2/kg TMCs (Tar Model Compounds) and TMC conversion of almost 100% were obtained over 6% Ni-4% Co/char, with more than 30% increase in hydrogen yield compared to traditional catalysts. Moreover, 6% Ni-4% Co/char exhibited excellent resistance to carbon deposition by removing the nucleation sites for graphite formation, forming stable Ni-Co alloy, and promoting the char gasification reaction; resistance to oxidation deactivation due to the high oxygen affinity of Co and reduction of the oxidized nickel by H2 and CO; resistance to sintering deactivation by strengthened interaction between Ni and Co, high specific surface area (920.61 m2/g), and high dispersion (7.3%) of Ni nanoparticles. This work provided a novel nanocatalyst with significant potential for long-term practical applications in the in situ conversion of tar into H2 during steam reforming.

Tar Formation in Gasification Systems: A Holistic Review of Remediation Approaches and Removal Methods

Gasification is an advanced thermochemical process that converts carbonaceous feedstock into syngas, a mixture of hydrogen, carbon monoxide, and other gases. However, the presence of tar in syngas, which is composed of higher molecular weight aromatic hydrocarbons, poses significant challenges for the downstream utilization of syngas. This Review offers a comprehensive overview of tar from gasification, encompassing gasifier chemistry and configuration that notably impact tar formation during gasification. It explores the concentration and composition of tar in the syngas and the purity of syngas required for the applications. Various tar removal methods are discussed, including mechanical, chemical/catalytic, and plasma technologies. The Review provides insights into the strengths, limitations, and challenges associated with each tar removal method. It also highlights the importance of integrating multiple techniques to enhance the tar removal efficiency and syngas quality. The selection of an appropriate tar removal strategy depends on factors such as tar composition, gasifier operating and design factors, economic considerations, and the extent of purity required at the downstream application. Future research should focus on developing cleaning strategies that consume less energy and cause a smaller environmental impact.

Harnessing synergy: Integrating agricultural waste and nanomaterials for enhanced sustainability

This paper aims to explore the cooperative use of agricultural waste and nanomaterials to improve environmental sustainability. The introduction highlights global environmental challenges and the objectives of integrating the two are highlighted. Valorization of agricultural waste is considered to reduce waste generation, while nanomaterials act as conversion catalysts that help to increase the efficiency of waste conversion and environmental remediation. In addition, synergistic approaches are discussed, including the combination of agricultural waste and nanomaterials, as well as the concept of enhanced resource management. The paper also presents case studies that demonstrate the success of such synergistic applications in pollution control and environmental remediation. Despite the challenges and risks, this approach can provide new ways to create more sustainable and resilient environments through the integration of resources, interdisciplinary cooperation and policy support.

Catalytic Properties of Biochar as Support Material Potential for Direct Methanol Fuel Cell: A Review

With the evolution and emergence of compounding environmental problems and issues, renewable energy promises to be a sustainable future technology. One technology considered is the fuel cell, which thrives on the primary function of electrocatalytic activities. Thus this review article envisages and presents a comprehensive summary of the applications of activated carbonaceous material as supports for electrocatalysts in fuel cells. The different techniques utilized to produce these carbon materials are discussed in detail. The overview architecture and the principle of the operation of fuel cells are also addressed. Additionally, electrocatalysts and the importance of support materials, their characteristics, and the role they play in the performance of the electrocatalyst will be reviewed. Unfortunately, the carbon-support-based electrocatalyst suffers long-term instability due to corrosion. Previously, carbon black has been used as a carbon support in various fuel cells. In recent years, there has been progress in the incorporation of nanostructured carbon supports in electrocatalysts in various fuel cells; however, there is still a great deal of distance to cover for nanostructured carbon-supported electrocatalysts in fuel cells to realize full commercialization and large-scale industrial purposes due to shortcomings in electrocatalysts, which are low-cost and highly efficient. This review therefore discusses the progress of incorporation of biochar extracted from sugar cane bagasse as carbon support in electrocatalysts for direct methanol fuel cells with the intention to provide insight into the quest of producing highly efficient and low cost fuel cells.

A review on the lignocellulosic derived biochar-based catalyst in wastewater remediation: Advanced treatment technologies and machine learning tools

Wastewater disposal in the ecosystem affects aquatic and human life, which necessitates the removal of the contaminants. Eliminating wastewater contaminants using biochar produced through the thermal decomposition of lignocellulosic biomass (LCB) is sustainable. Due to its high specific surface area, porous structure, oxygen functional groups, and low cost, biochar has emerged as an alternate contender in catalysis. Various innovative advanced technologies were combined with biochar for effective wastewater treatment. This review examines the use of LCB for the synthesis of biochar along with its activation methods. It also elaborates on using advanced biochar-based technologies in wastewater treatment and the mechanism for forming oxidizing species. The research also highlights the use of machine learning in pollutant removal and identifies the obstacles of biochar-based catalysts in both real-time and cutting-edge technologies. Probable and restrictions for further exploration are discussed.

Recent advancements and challenges in emerging applications of biochar-based catalysts

The sustainable utilization of biochar produced from biomass waste could substantially promote the development of carbon neutrality and a circular economy. Due to their cost-effectiveness, multiple functionalities, tailorable porous structure, and thermal stability, biochar-based catalysts play a vital role in sustainable biorefineries and environmental protection, contributing to a positive, planet-level impact. This review provides an overview of emerging synthesis routes for multifunctional biochar-based catalysts. It discusses recent advances in biorefinery and pollutant degradation in air, soil, and water, providing deeper and more comprehensive information of the catalysts, such as physicochemical properties and surface chemistry. The catalytic performance and deactivation mechanisms under different catalytic systems were critically reviewed, providing new insights into developing efficient and practical biochar-based catalysts for large-scale use in various applications. Machine learning (ML)-based predictions and inverse design have addressed the innovation of biochar-based catalysts with high-performance applications, as ML efficiently predicts the properties and performance of biochar, interprets the underlying mechanisms and complicated relationships, and guides biochar synthesis. Finally, environmental benefit and economic feasibility assessments are proposed for science-based guidelines for industries and policymakers. With concerted effort, upgrading biomass waste into high-performance catalysts for biorefinery and environmental protection could reduce environmental pollution, increase energy safety, and achieve sustainable biomass management, all of which are beneficial for attaining several of the United Nations Sustainable Development Goals (UN SDGs) and Environmental, Social and Governance (ESG).

Valorization of wipe wastes for the synthesis of microporous carbons and their application in CO2 capture, gas separation and H2-storage

Wipe wastes have been used as a cellulosic source to synthesize biochars. Prior to the synthesis of the adsorbents by the pyrolysis of wipes wastes, this waste was treated to remove the pathogenic agents. Then, the wipe wastes were pyrolyzed between 500 and 900 °C to obtain biochars, whose microporosity increased proportionally to the pyrolysis temperature, achieving a maximum CO2-adsorption uptake of 2.53 mmol/g at a pressure of 760 mm of Hg and 25 °C for the biochar pyrolized at 900 °C. The synthesized biochars are also highly selective towards CO2-adsorption in CO2/N2 or CO2/H2 mixtures. Hence, these adsorbents have shown a great potential to be used in flue gas treatment and H2-purification processes. Biochar treatment with KOH further improves microporosity due to chemical activation although the addition of a large amount of KOH leads to excessive microporosity causing a collapse in the pore structure and decreasing CO2-adsorption capacity.

Effects of Heat Treatment on the Physicochemical Properties and Electrochemical Behavior of Biochars for Electrocatalyst Support Applications

The present work reports the synthesis and the physicochemical characterization of biochar from the organic wastes of nopal (Opuntia Leucotricha), coffee grounds (Coffea arabica) and Ataulfo mango seeds (Mangifera indica) as alternative electrocatalyst supports to Vulcan XC-72 carbon black. The biochars were prepared using pyrolysis from organic wastes collected at three temperatures, 600, 750 and 900 °C, under two atmospheres, N2 and H2. The synthesized biochars were characterized using Raman spectroscopy and scanning electron microscopy (SEM) to obtain insights into their chemical structure and morphological nature, respectively, as a function of temperature and pyrolysis atmosphere. A N2 adsorption/desorption technique, two-point conductivity measurements and cyclic voltammetry (CV) were conducted to evaluate the specific surface area (SSA), electrical conductivity and double-layer capacitance, respectively, of all the biochars to estimate their physical properties as a possible alternative carbon support. The results indicated that the mango biochar demonstrated the highest properties among all the biochars, such as an electrical conductivity of 8.3 S/cm-1 at 900 °C in N2, a specific surface area of 829 m2/g at 600 °C in H2 and a capacitance of ~300 mF/g at 900 °C in N2. The nopal and coffee biochars exhibited excellent specific surface areas, up to 767 m2/g at 600 °C in N2 and 699 m2/g at 750 °C in H2, respectively; nonetheless, their electrical conductivity and capacitance were limited. Therefore, the mango biochar at 900 °C in N2 was considered a suitable alternative carbon material for electrocatalyst support. Additionally, it was possible to determine that the electrical conductivity and capacitance increased as a function of the pyrolysis temperature, while the specific surface area decreased for some biochars as the pyrolysis temperature increased. Overall, it is possible to conclude that heat treatment at a high temperature of 900 °C enhanced the biochar properties toward electrocatalyst support applications.

Advances in the fabrication, modification, and performance of biochar, red mud, calcium oxide, and bentonite catalysts in waste-to-fuel conversion

Various catalysts are being used in fuel production from biomass and polymeric waste for the obtention of an alternative energy source with both environmental friendliness and economic viability. Biochar, red mud bentonite, and calcium oxide have been shown to play a pertinent role as catalysts in waste-to-fuel conversion processes, such as transesterification and pyrolysis. In this line of thought, this paper has provided a compendium of the fabrication and modification technologies of bentonite, red mud calcium oxide, and biochar, together with their various performances in their application in the waste-to-fuel processes. Additionally, an overview of the structural and chemical attributes of these components is discussed regarding their efficiency. Ultimately, research trends and future points of focus are evaluated, and it is observed that techno-economic optimization of catalyst synthetic routes and investigation of new catalytic formulations, such as biochar and red mud-based nanocatalysts, are potential prospects. This report also offers future research directions that are anticipated to contribute to the development of sustainable green fuel generation systems.

The performance and mechanism of iron-mediated chemical oxidation: Advances in hydrogen peroxide, persulfate and percarbonate oxidation

Many studies have successfully built iron-mediated materials to activate or catalyze Fenton-like reactions, with applications in water and wastewater treatment being investigated. However, the developed materials are rarely compared with each other regarding their performance of organic contaminant removal. In this review, the recent advances of Fenton-like processes in homogeneous and heterogeneous ways are summarized, especially the performance and mechanism of activators including ferrous iron, zero valent iron, iron oxides, iron-loaded carbon, zeolite, and metal organic framework materials. Also, this work mainly compares three O-O bond containing oxidants including hydrogen dioxide, persulfate, and percarbonate, which are environmental-friendly oxidants and feasible for in-situ chemical oxidation. The influence of reaction conditions, catalyst properties and benefits are analyzed and compared. In addition, the challenges and strategies of these oxidants in applications and the major mechanisms of the oxidation process have been discussed. This work can help understand the mechanistic insights of variable Fenton-like reactions, the role of emerging iron-based materials, and provide guidance for choosing appropriate technologies when facing real-world water and wastewater applications.

P-doped biochar regulates nZVI nanocracks formation for superefficient persulfate activation

In this study, a novel P-doped biochar loaded with nano zero-valent iron (nZVI) composite (nZVI@P-BC), with abundant nanocracks from inside to outside in nZVI particles, was designed for ultra-efficient persulfate (PS) activation and gamma-hexachlorocyclohexane (γ-HCH) degradation. Results showed that P-doping treatment significantly enhanced specific surface area, hydrophobicity and adsorption capacity of biochar. Systematic characterizations revealed that the additional electrostatic stress and continuously generated multiple new nucleation sites of P-doped biochar were the main mechanism for the formation of nanocracked structure. nZVI@P-BC with KH₂PO₄ as P precursor showed superefficient PS activation and γ-HCH degradation, by which 92.6 % of 10 mg/L γ-HCH was removed within 10 min using 1.25 g/L catalyst and 4 mM PS, being 10.5-fold greater than that of without P-doping. Electron spin resonance and radical quenching test showed that •OH and ¹O₂ were the dominant active species, and further revealed that the unique nanocracked nZVI, high adsorption capacity and abundant P sites in nZVI@P-BC enhanced their generation and mediated extra direct surface electron transfer. nZVI@P-BC also exhibited high tolerance to different anions, humic acid and wide pH conditions. This work provides a new strategy and mechanism insight for the rational design of nZVI and diversified application of biochar.

Promoted wet peroxide oxidation of chlorinated volatile organic compounds catalyzed by FeOCl supported on macro-microporous biomass-derived activated carbon

Chlorinated volatile organic compounds (CVOCs) are a recalcitrant class of air pollutants, and the strongly oxidizing reactive oxygen species (ROS) generated in advanced oxidation processes (AOPs) are promising to degrade them. In this study, a FeOCl-loaded biomass-derived activated carbon (BAC) has been used as an adsorbent for accumulating CVOCs and catalyst for activating H₂O₂ to construct a wet scrubber for the removal of airborne CVOCs. In addition to well-developed micropores, the BAC has macropores mimicking those of biostructures, which allows CVOCs to diffuse easily to its adsorption sites and catalytic sites. Probe experiments have revealed HO^• to be the dominant ROS in the FeOCl/BAC + H₂O₂ system. The wet scrubber performs well at pH 3 and H₂O₂ concentrations as low as a few mM. It is capable of removing over 90% of dichloroethane, trichloroethylene, dichloromethane and chlorobenzene from air. By applying pulsed dosing or continuous dosing to replenish H₂O₂ to maintain its appropriate concentration, the system achieves good long-term efficiency. A dichloroethane degradation pathway is proposed based on the analysis of intermediates. This work may provide inspiration for the design of catalyst exploiting the inherent structure of biomass for catalytic wet oxidation of CVOCs or other contaminants.

New trajectories of technologies for the removal of pollutants and emerging contaminants in the environment

Modern society has increasingly a diffusion of pollutants and emerging contaminants (e.g., different types of chemicals and endocrine disruptors in pharmaceuticals, pesticides, household cleaning, and personal care products, etc.) that have detrimental effects on the environment (atmosphere, hydrosphere, biosphere and anthroposphere) and also generate diseases and disorders on the people health. Environmental science requires efforts in the detection and elimination of manifold pollutants and emerging pollutants with appropriate product and process technologies. This study aims to analyze different paths of treatment technologies to investigate their evolution and predict new directions of promising technological trajectories to support the removal of contaminants directed to reach, whenever possible, sustainable development objectives. The work is mainly devoted to wastewater treatment technologies. A proposed model analyzes the evolution of patents (proxy of innovation and new technology) on publications (proxy of science and knowledge advances) to quantify the relative growth rate of new trajectories of technologies to remove pollutants and emerging contaminants. Results reveal that new directions of treatment technologies having an accelerated rate of growth are (in decreasing order): biochar and reverse osmosis in physical-based technologies, coagulation, and disinfection water treatments in chemical-based technologies and anaerobic processes in biological-based technologies. Other main technologies, such as carbon nanotubes and advanced oxidation processes, seem to be in the initial phase of development and need learning by using processes and further science and technology advances to be implemented as effective treatments and cost-effective. The results here are in accord with global water and wastewater equipment treatment market revenues by technology, showing a similar trend. These findings bring us to the main information to extend the knowledge about new directions of technologies for the treatment and/or elimination of pollutants and microorganisms that can support decisions of policymakers towards goals of sustainable development by reducing environmental degradation and people health disorders.

Effective removal of methylene blue with zero-valent iron/tea residual biochar composite: Performance and mechanism

Zero-valent iron (Fe⁰)-modified biochar (BFN) was prepared via low-temperature pyrolysis of tea residue (TR) and ferric nitrate hexahydrate (FN) coupled with NaOH activation for the removal of methylene blue (MB). BFN exhibited a specific surface area of 382.66 m²·g^-1, an average pore diameter of 4.97 nm and an equilibrium adsorption capacity as high as 452.5 mg·g^-1 of 0.33 g·L^-1 toward 150 mg·L^-1 MB within 60 min at 30 °C and pH 7.0. The recovered MB is far below of the removal rate in each of adsorption-desorption cycle because the removal mechanism is that MB molecular was firstly chemically adsorbed, then it was reduced and mineralized by BFN with the formation of nitrate, sulfate, CO₂ and H₂O.

Construction of activated biochar/Bi2WO6 and /Bi2MoO6 composites to enhance adsorption and photocatalysis performance for efficient application in the removal of pollutants and disinfection

To synergistically enhance the adsorption and photocatalytic performance of Bi2WO6 and Bi2MoO6, using activated biochar (ACB) as substrate, ACB-Bi2WO6 and ACB-Bi2MoO6 composites were facilely prepared by hydrothermal synthesis. Their adsorption-photocatalytic degradation effects on rhodamine B (RhB), tetracycline (TC), and norfloxacin (NOR) were comparatively investigated. Additionally, the effects of environmental factors, wastewater treatment tests, and disinfection were systematically studied, and the enhancement mechanisms and reasons for the degradation differences were highlighted. The results showed that ACB-Bi2WO6 and ACB-Bi2MoO6 were confirmed to form intimately contacted heterojunctions by various advanced characterization techniques. The introduction of ACB narrowed the band-gap energy of Bi2WO6 and Bi2MoO6, and improved the visible light absorption range and specific surface area. The optimal loading ratios of ACB-Bi2WO6 and ACB-Bi2MoO6 were 1:1.06 and 1:0.58, respectively. The removal rate of ACB-Bi2WO6 for high concentrations of RhB (200 mg·L-1), TC and NOR (50 mg·L-1) were 89.15%, 87.27%, and 72.17%, respectively, which were higher than those of ACB-Bi2MoO6 and significantly stronger than those of Bi2WO6 and Bi2MoO6. This was attributed to the more effective inhibition of photogenerated carrier recombination, higher absorbance, and uniform morphology via ACB-Bi2WO6. ·OH and holes were dominant active species in photocatalysis, and the possible photogenerated carrier transfer path is type II heterojunction. Furthermore, ACB-Bi2WO6 possessed good reusability, and the removal of RhB and TC from the actual wastewater exceeded 80.63% and 58.54%, respectively. The sterilization rates of ACB-Bi2WO6 reached 99% and 95% for E. coli and S. aureus within 24 h, respectively. Therefore, ACB-Bi2WO6 was more recommended for environmental applications.

Cellulose nanocrystals isolated from corn leaf: straightforward immobilization of silver nanoparticles as a reduction catalyst

As the most abundant natural biopolymer on earth, celluloses have long-term emerged as a capable platform for diverse purposes. In the context of metal nanoparticles applied to catalysis, the alternatives to traditional catalyst supports by using biomass-derived renewable materials, likely nanocelluloses, have been paid a great effort, in spite of being less exploited. In this study, cellulose nanocrystals were isolated from corn leaf via chemical treatment involving alkalizing, bleaching and acid hydrolysis. The crystallinity of obtained cellulose was evaluated in each step, focusing on the effects of reactant concentration and reaction time. Cellulose nanocrystals were characterized by powder X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), evidencing the presence of cellulose nanospheres (crystallinity index of 67.3% in comparison with 38.4% from untreated raw material) in the size range of 50 nm. Without using any additional surfactants or stabilizers, silver nanoparticles (AgNPs) well-dispersed on the surface of cellulose nanocrystals (silver content of 5.1 wt%) could be obtained by a simple chemical reduction using NaBH4 at room temperature. The catalytic activity was evaluated in the selective reductions of 4-nitrophenol towards 4-aminophenol and methyl orange towards aromatic amine derivatives in water at room temperature. The effects of catalyst amount and reaction time were also studied in both reduction processes, showing near-quantitative conversions within 5 minutes and obeying the pseudo-first-order kinetics, with the apparent kinetic rate constants of 8.9 × 10-3 s-1 (4-nitrophenol) and 13.6 × 10-3 s-1 (methyl orange). The chemical structure of the catalytic system was found to be highly stable during reaction and no metal leaching was detected in reaction medium, evidencing adaptability of cellulose nanocrystals in immobilizing noble metal nanoparticles.

Pyrolysis Temperature and Application Rate of Sugarcane Straw Biochar Influence Sorption and Desorption of Metribuzin and Soil Chemical Properties

Pyrolysis temperature and application rate of biochar to soil can influence herbicide behavior and soil fertility. The objective was to investigate the effect of soil amendments with application rates of sugarcane straw biochar, produced at different pyrolysis temperatures, on the sorption–desorption of metribuzin in soil. The analysis was performed using high-performance liquid chromatography (HPLC). The treatments were three pyrolysis temperatures (BC350, BC550 and BC750 °C) and seven application rates (0, 0.1, 0.5, 1, 1.5, 5 and 10% w w−1). Amended soil with different application rates decreased H + Al and increased pH, OC, P, K, Ca, Mg, Fe, Mn, CEC and BS contents. Kf values of sorption and desorption of metribuzin were 1.42 and 0.78 mg(1−1/n) L1/n Kg−1, respectively, in the unamended soil. Application rates < 1% of biochar sorbed ~23% and desorbed ~15% of metribuzin, similar to unamended soil, for all pyrolysis temperatures. Amended soil with 10% of BC350, BC550 and BC750 sorbed 63.8, 75.5 and 89.4% and desorbed 8.3, 5.8 and 3.7% of metribuzin, respectively. High pyrolysis temperature and application rates of sugarcane straw biochar show an ability to immobilize metribuzin and improve soil fertility, which may influence the effectiveness in weed control.

Obtaining the best temperature parameters for co-carbonization of lignite (yatağan)-biomass (peach seed shell) by structural characterization

In this study, Yatağan lignite (YL) and peach kernel shells (PKS) were originally taken separately and in a 1: 1 ratio by weight. Experiments were carried out in a 3-zone heated cylindrical furnace in a steel reactor. Structural characterization of all the solid products obtained was made by FTIR, XRD, and SEM analysis. When the FTIR and XRD spectra of the raw samples are examined, it is seen that they are rich in functional groups. It is seen that the PKS has aliphatic and aromatic structures and cellulosic structure –OH stresses (3500 cm⁻¹). The sharp peak around 2918 cm⁻¹ in Yatağan lignite belongs to the aliphatic C–H stretch. In the XRD spectrum, it is seen that both structures are largely amorphous. The raw PKS contains 3 different amorphous macromolecular structures. Yatagan lignite, on the other hand, contains crystalline peaks of clay and inorganic structures, depending on the ash content, as well as the amorphous structure. As the temperature increases depending on the carbonization temperature, as seen in the FTIR spectrum, the peaks of the functional groups decrease and disappear with the disruption of small macromolecular structures. As a result of the structural adjustment with the temperature increase, M-O-M peaks around 1000 cm⁻¹ remain due to the aromatic C–H stretching and ash content. The paper centers around test assurance of operating temperatures in the consuming layer during co-carbonization. It is obtained that 800 °C is the best temperature condition for the co-carbonization process. It has been concluded that the chars obtained as a result of pyrolysis will be used as a solid fuel in both environmental (the lowest sulfur content) and economic (400 °C) sense. However, the fact that it has a very low sulfur content with the increase in the liquid and gas efficiency obtained at high temperatures again proves the production of an environmentally friendly liquid fuel.

The application of transition metal-modified biochar in sulfate radical based advanced oxidation processes

Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) is a very important chemical oxidation technology for the degradation of recalcitrant organic pollutants in water and has been well developed. Recently, transition metals or their oxides-modified biochar has been widely used as the catalyst to catalyze peroxymonosulfate (PMS) and peroxydisulfate (PS) in SR-AOPs due to their outstanding properties (e.g., large surface area, high stability, abound catalytic sites, and diversity of material design, etc.). These composite materials not only combine the respective beneficial characteristics of biochar and transition metals (or their oxides) but also often present synergistic effects between the components. In this review, we present the synthesis of different types of transition metal (or metal oxides)/biochar-based catalysts and their application in SR-AOPs. The catalytic mechanism, including the generation process of free radicals and other reaction pathways on the surface of the catalyst were also carefully discussed. Particular attention has been paid to the synergistic effects between the components that result in enhanced catalytic performance. At the end of this review, the future development prospects of this technology are proposed.

Review on Catalytic Biomass Gasification for Hydrogen Production as a Sustainable Energy Form and Social, Technological, Economic, Environmental, and Political Analysis of Catalysts

Sustainable energy production is a worldwide concern due to the adverse effects and limited availability of fossil fuels, requiring the development of suitable environmentally friendly alternatives. Hydrogen is considered a sustainable future energy source owing to its unique properties as a clean and nontoxic fuel with high energy yield and abundance. Hydrogen can be produced through renewable and nonrenewable sources where the production method and feedstock used are indicators of whether they are carbon-neutral or not. Biomass is one of the renewable hydrogen sources that is also available in large quantities and can be used in different conversion methods to produce fuel, heat, chemicals, etc. Biomass gasification is a promising technology to generate carbon-neutral hydrogen. However, tar production during this process is the biggest obstacle limiting hydrogen production and commercialization of biomass gasification technology. This review focuses on hydrogen production through catalytic biomass gasification. The effect of different catalysts to enhance hydrogen production is reviewed, and social, technological, economic, environmental, and political (STEEP) analysis of catalysts is carried out to demonstrate challenges in the field and the development of catalysts.

The potential of biochar-photocatalytic nanocomposites for removal of organic micropollutants from wastewater

Biochar (BC)-photocatalyst nanocomposites have emerged as appealing water and wastewater treatment technology. Such nanocomposite materials benefit from the synergistic effect of adsorption and photocatalysis to attain improved removal of pollutants from water and wastewater. Under this review, three BC-based nanocomposite photocatalysts such as BC-TiO₂, BC-ZnO, and BC-spinel ferrites were considered. These nanocomposites acquire intrinsic properties to improve the practical limitations of the pristine BC and photocatalysts. The BC-based nanocomposites attained high photocatalytic activity, mechanical hardness, thermal stability, chemically non-reactive, magnetically permeable, reduced energy band gaps, improved reusability, and simplified recovery. Moreover, BC-based photocatalytic nanocomposites showed reduced recombination rates of the electron-hole pairs which are desirable for photocatalytic applications. However, the surface areas of the composites are usually smaller than that of the BC but higher than those of the pristine photocatalysts. Practically, the performances of the nanocomposites are much superior to those of the corresponding pristine components. This hybrid treatment technology is an emerging field and its industrial application is still at an early stage of the investigation. Therefore, exploring the full potential and practical applications of this technology is highly encouraging. Hence, this review focused on the critical evaluation of the most recent research on the synthesis, characterization, and photocatalytic treatment efficiency of the BC photocatalyst nanocomposites towards emerging pollutants in the aqueous medium. Moreover, the influence of various sources of BC feedstocks and their limitations on adsorption and photodegradation activities are discussed in detail. Finally, concluding remarks and future research directions are given to assist and shape the exploration of BC-based nanocomposite photocatalysts in water treatment.

Biochar in the 21st century: A data-driven visualization of collaboration, frontier identification, and future trend

The massive amounts of publication data are highly valuable, because in addition to the advancement in science, technology, and policy, such data can provide critical information and guidance on what have been published, what topical changes have evolved, and what are the trending fields deserving more attention. In the 21st century, biochar has played an indispensable role in the long-term global development strategies in response to "Carbon neutralization", "Agricultural management", and "Environmental restoration", and accumulated many high-quality publications. Herein, this study provides a new data-driven bibliometric analysis strategy and framework for mining the core content of massive literature data, and aims at bringing unique insights for the research prospects as well as opportunities of biochar. The results show that biochar researches have made great progress from 1999 to 2020, but cross-disciplinary teamwork should be further emphasized. The research frontier identification reveals that sewage treatment, efficient removal, and functional composite materials will be the issues which must be paid continual attention at present and in the future. Furthermore, studies on global climate impact, biomass resource utilization, carbon sequestration, carbon cycle, and even the negative effects of biochar have gradually begun to be taken seriously.

Citric-Acid-Assisted Preparation of Biochar Loaded with Copper/Nickel Bimetallic Nanoparticles for Dye Degradation

Immobilization of nanocatalysts on biochar is receiving unprecedented interest among material and catalysis scientists due to its simplicity, versatility, and high efficiency. Herein, we propose a new direct approach to obtain bimetallic copper/nickel nanoparticles loaded on olive stone biochar. The bimetallic-coated biochar and the reference materials, namely bare biochar, copper rich-loaded biochar, and nickel-loaded biochar, were prepared by pyrolysis from olive pit powder particles impregnated first with citric acid (CA) and then with copper and nickel nitrates at 400 °C under nitrogen flow. We employed citric acid in the process in order to examine its effect on the structural and textural properties of biochar supporting the metallic nanoparticles. Surprisingly, citric acid induced the formation of agglomerated or even raspberry-shaped bimetallic copper/nickel nanoparticles. Large 450–500 nm agglomerates of ~80 nm bimetallic CuNi NPs were noted for B-CA@CuNi. Interestingly, for biochar material prepared with initial Cu/Ni = 10 molar ratio (B-CA@CuNi10/1), the bimetallic NPs formed unusual nanoraspberries (174 ± 8 nm in size), which were agglomerates of individual 10–20 nm CuNi10/1 nanoparticles. The B-CA@CuNi and reference materials were characterized by Raman spectroscopy, scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and magnetometry. The B-CA@CuNi and B-CA@Ni materials could be efficiently attracted with a magnet but not B-CA@CuNi10/1 due to the low nickel loading. B-CA@CuNi was tested as a catalyst for the degradation of methyl orange (MO). Discoloration was noted within 10 min, much faster than a similar material prepared in the absence of CA. B-CA@CuNi could be recycled at least 3 times while still exhibiting the same fast catalytic discoloration performance. This paper stresses the important role of citric acid in shaping bimetallic nanoparticles loaded in situ on biochar during the slow pyrolysis process and in enabling faster catalytic discoloration of organic dye solution.

Facile preparation of magnetic porous biochars from tea waste for the removal of tetracycline from aqueous solutions: Effect of pyrolysis temperature

Pyrolysis process significantly influences the physicochemical properties and potential application of magnetic porous biochars (MPBCs). However, the effects of pyrolysis temperature on the properties of MPBCs as well as substantial adsorption are still unclear. This study reported a facile method to obtain the MPBC from tea waste via pyrolysis of a mixture of hydrochar, KHCO₃, and FeCl₃·6H₂O under different temperatures (500-800 °C), and explored further the adsorption toward tetracycline (TC). Results showed pyrolysis temperature obviously influenced the physicochemical properties of MPBCs, and MPBC pyrolyzed at 700 °C (MPBC-700) has a highest specific surface area (1066 m² g^-1) and pore volume (2.693 cm³ g^-1). However, the adsorption potential increased consistently from 59.35 mg g^-1 for MPBC-500 to 333.22 mg g^-1 for MPBC-800, suggesting that the surface area and pore volume were not the only factors determining TC adsorption. Further analysis showed that the pore-filling, π-π interaction, complexation, and hydrogen bonding contributed together to TC adsorption. Moreover, all MPBCs possessed a high saturation magnetization, indicating the easy separation by an external magnet. Therefore, MPBCs (especially at 700 °C) can act as the excellent adsorbents for contaminant removal due to their high separation, adsorption, and reuse performance.

Considering photocatalytic activity of Cu2+/biochar-doped TiO2 using corn straw as sacrificial agent in water decomposition to hydrogen

In this paper, a simple one-pot thermal synthesis method was used to successfully prepare Cu²⁺/biochar-doped TiO₂ composite catalytic materials. The photocatalytic hydrogen production performance of the composites under different environmental conditions (dark, solar, and visible light irradiation) was analyzed in a biomass photocatalytic system using a corn straw suspension as a sacrificial agent. The Cu²⁺/biochar-doped TiO₂ materials were characterized by SEM, TEM, XRD, FT-IR, XPS, and UV analysis. The photoelectric properties of the Cu²⁺/biochar-doped TiO₂ composites were also analyzed, and the charge separation mechanism of photogenerated carriers under different environmental conditions was investigated. Compared with pure TiO₂, the hydrogen production rate of Cu²⁺/biochar-doped TiO₂ is 23.6 times higher under visible light irradiation and 16.8 times higher under simulated solar irradiation. Using density functional theory, a crystal structure model of Cu²⁺/biochar-doped TiO₂ was established to analyze its energy band structure and density of states. An analysis of the mechanism shows that under simulated sunlight irradiation, the synergistic effect of the TiO₂ doped with Cu²⁺ and biochar causes the formation of a potential Schottky heterojunction on the surface and induces interfacial charge transfer. Furthermore, under visible light irradiation, the photocatalytic production of hydrogen by the Cu²⁺/biochar-doped TiO₂ composite is mainly due to the surface plasmon resonance mechanism of Cu ion-doped TiO₂.

Investigations of Cr(VI) removal by millet bran biochar modified with inorganic compounds: Momentous role of additional lactate

In this study, millet bran biochars modified with inorganic compounds (H₃PO₄: P-BC, NaOH: Na-BC and K₂CO₃: K-BC) were prepared and applied for Cr(VI) removal to evaluate the effects of modification on biochars' physicochemical properties. The results showed that Cr(VI) reduction capacity complied with the order of Na-BC > BC > P-BC > K-BC, and reductive groups such as -OH and -NH₂ played considerable roles in electrons donating. Based on this, lactate was added for further investigation of electrons transferring. The results displayed that Cr(VI) removal of all biochars was enhanced tremendously and modified biochars exhibited better Cr(VI) reduction. This may be due to the bridging effect of lactate, which could not only chelate with Cr(VI) via -COOH (or -OH) but also form hydrogen bonds with oxygen or nitrogen containing groups on biochars through the other groups, thus facilitating electrons transferring between biochars and Cr(VI). This work provided an insight into evaluation of the influence of inorganic compounds modification on both electrons donating capability of biochars and electrons transferring potential of biochars combined with lactate in Cr(VI) removal.

Copper/Nickel-Decorated Olive Pit Biochar: One Pot Solid State Synthesis for Environmental Remediation

Developing micro- and nanomaterials for environmental pollution remediation is currently a pertinent topic. Among the plethora of strategies, designing supported nanocatalysts for the degradation of pollutants has achieved prominence. In this context, we are addressing one of the UN Sustainable Development Goals by valorizing agrowaste as a source of biochar, which serves as a support for bimetallic nanocatalysts. Herein, olive pit powder particles were impregnated with copper and nickel nitrates and pyrolyzed at 400 °C. The resulting material consists of bimetallic CuNi-decorated biochar. CuNi nanocatalysts were found to be as small as 10 nm and very well dispersed over biochar with zero valent copper and nickel and the formation of copper–nickel solid solutions. The biochar@CuNi (B@CuNi) exhibited typical soft ferromagnet hysteresis loops with zero remanence and zero coercivity. The biochar@CuNi was found to be an efficient catalyst of the reduction in methyl orange (MO) dye, taken as a model pollutant. In sum, the one-pot method devised in this work provides unique CuNi-decorated biochar and broadens the horizons of the emerging topic of biochar-supported nanocatalysts.