Phytoremediation of VOCs from indoor air by ornamental potted plants: A pilot study using a palm species under the controlled environment

A review of phyto- and microbial-remediation of indoor volatile organic compounds

Volatile organic compounds (VOCs) are crucial air pollutants in indoor environments, emitted from building materials, furniture, consumer products, cleaning products, smoking, fuel combustion, cooking, and other sources. VOCs are also emitted from human beings via breath and whole-body skin. Some VOCs cause dermal/ocular irritation as well as gastrointestinal, neurological, cardiovascular, and/or carcinogenic damage to human health. Because people spend most of their time indoors, active control of indoor VOCs has garnered attention. Phytoremediation and microbial remediation, based on plant and microorganism activities, are deemed sustainable, cost-effective, and public-friendly technologies for mitigating indoor VOCs. This study presents the major sources of VOCs in indoor environments and their compositions. Various herbaceous and woody plants used to mitigate indoor VOCs are summarized and their VOCs removal performance is compared. Moreover, this paper reviews the current state of active phytoremediation and microbial remediation for the control of indoor VOCs, and discusses future directions.

Phytoremediation of formaldehyde by three selected non-native indoor plant species

Formaldehyde is an organic volatile compound and a commonly used chemical in various construction materials thus causing dwellers to be exposed to it inside a building. Its remediation from indoor air has been carried out through various techniques where potted plants and living walls are at the front foot. It is necessary to study plants under various conditions for their efficiency. We selected three plant species Epipremnum aureum, Chlorophytum comosum, and Spathiphyllum wallisii non-native of Bahrain. These plants were tested under normal conditions in a sealed fumigation box where formaldehyde concentration was kept ∼3 ppm, CO2 ∼ 450 ppm, light intensity 1000 Lx (equal to 13.5 µmol.m-2.s-1), irrigated with tap water. Analysis of Variance (ANOVA) statistical method was performed to test the significant differences of purification efficiencies of the tested indoor plants against HCHO. In addition, the statistical method was used to test the significant difference, if any, of the plants to CO2 emission because of absorbing HCHO. The physical health of plants and their short-term remediation ability reveals that all plants exhibited up to 70% remediation potential and tolerance to remediate the target chemical. It is evident that the impact of local environmental factors on the plants is negligible.

Advances in amelioration of air pollution using plants and associated microbes: An outlook on phytoremediation and other plant-based technologies

Globally, air pollution is an unfortunate aftermath of rapid industrialization and urbanization. Although the best strategy is to prevent air pollution, it is not always feasible. This makes it imperative to devise and implement techniques that can clean the air continuously. Plants and microbes have a natural potential to transform or degrade pollutants. Hence, strategies that use this potential of living biomass to remediate air pollution seem to be promising. The simplest future trend can be planting suitable plant-microbe species capable of removing air pollutants like SO2, CO2, CO, NOX and particulate matter (PM) along roadsides and inside the buildings. Established wastewater treatment strategies such as microbial fuel cells (MFC) and constructed wetlands (CW) can be suitably modified to ameliorate air pollution. Green architecture involving green walls and green roofs is facile and aesthetic, providing urban ecosystem services. Certain microbe-based bioreactors such as bioscrubbers and biofilters may be useful in small confined spaces. Several generative models have been developed to assist with planning and managing green spaces in urban locales. The physiological limitations of using living organisms can be circumvent by applying biotechnology and transgenics to improve their potential. This review provides a comprehensive update on not just the plants and associated microbes for the mitigation of air pollution, but also lists the technologies that are available and/or can be modified and used for air pollution control. The article also gives a detailed analysis of this topic in the form of strengths-weaknesses-opportunities-challenges (SWOC). The strategies mentioned in this review would help to attain corporate Environmental Social and Governance (ESG) and Sustainable Development Goals (SDGs), while reducing carbon footprint in the urban scenario. The review aims to emphasise that urbanization is possible while tackling air pollution using facile, green techniques involving plants and associated microbes.

Is aromatic plants environmental health engineering (APEHE) a leverage point of the earth system?

It is important to note that every ecological niche in an ecosystem is significant. This study aims to assess the importance of medicinal and aromatic plants (MAPs) in the ecosystem from multiple perspectives. A primary model of Aromatic Plants Environmental Health Engineering (APEHE) has been designed and constructed. The APEHE system was used to collect aerosol compounds, and it was experimentally verified that these compounds have the potential to impact human health by binding to AKT1 as the primary target, and MMP9 and TLR4 as secondary targets. These compounds may indirectly affect human immunity by reversing drug resistance in drug-resistant bacteria in the nasal cavity. This is mainly achieved through combined mutations in sdhA, scrA, and PEP. Our findings are based on Network pharmacology and molecular binding, drug-resistance rescue experiments, as well as combined transcriptomics and metabolomics experiments. It is suggested that APEHE may have direct or indirect effects on human health. We demonstrate APEHE's numerous potential benefits, such as attenuation and elimination of airborne microorganisms in the environment, enhancing carbon and nitrogen storage in terrestrial ecosystems, promoting the formation of low-level clouds and strengthening the virtuous cycle of Earth's ecosystems. APEHE also supports the development of transdisciplinary technologies, including terpene energy production. It facilitates the creation of a sustainable circular economy and provides additional economic advantages through urban optimisation, as well as fresh insights into areas such as the habitability of other planets. APEHE has the potential to serve as a leverage point for the Earth system. We have created a new research direction.

Engineering green wall botanical biofiltration to abate indoor volatile organic compounds: A review on mechanisms, phyllosphere bioaugmentation, and modeling

Indoor air pollution affects the global population, especially in developed countries where people spend around 90% of their time indoors. The recent pandemic exacerbated the exposure by relying on indoor spaces and a teleworking lifestyle. VOCs are a group of indoor air pollutants with harmful effects on human health at low concentrations. It is widespread that plants can remove indoor VOCs. To this day, research has combined principles of phytoremediation, biofiltration, and bioremediation into a holistic and sustainable technology called botanical biofiltration. Overall, it is sustained that its main advantage is the capacity to break down and biodegrade pollutants using low energy input. This differs from traditional systems that transfer VOCs to another phase. Furthermore, it offers additional benefits like decreased indoor air health costs, enhanced work productivity, and well-being. However, many disparities exist within the field regarding the role of plants, substrate, and phyllosphere bacteria. Yet their role has been theorized; its stability is poorly known for an engineering approach. Previous research has not addressed the bioaugmentation of the phyllosphere to increase the performance, which could boost the system. Moreover, most experiments have studied passive potted plant systems at a lab scale using small chambers, making it difficult to extrapolate findings into tangible parameters to engineer the technology. Active systems are believed to be more efficient yet require more maintenance and knowledge expertize; besides, the impact of the active flow on the long term is not fully understood. Besides, modeling the system has been oversimplified, limiting the understanding and optimization. This review sheds light on the field's gains and gaps, like concepts, experiments, and modeling. We believe that embracing a multidisciplinary approach encompassing experiments, multiphysics modeling, microbial community analysis, and coworking with the indoor air sector will enable the optimization of the technology and facilitate its adoption.

Sustainable, efficient, and synergistic photocatalytic degradation toward organic dyes and formaldehyde gas via Cu2O NPs@wood

Cuprous oxide (Cu2O) nanoparticles (NPs) was anchored on wood by simple spraying method, then both soft and hard wood has been endowed efficient function photocatalytic degradation toward organic dyes and formaldehyde gas synergistically. The best recycle ability of wood based photocatalyst toward organic pollutants was achieved, which was characterized by photocatalytic degradation efficiency of methylene blue (MB) more than 95% after 100 cycles, and formaldehyde gas over 85% after 60 cycles. Cu2O NPs@wood performed much lower forbidden bandwidth (Eg), which accelerated to generate much more radical of e- and finally promoted the capacity of photocatalytic degradation. The proposed Cu2O NPs@wood catalysts has potential to be applied both in the field of wastewater and air pollution remediation.

Benchmark of plant-based VOCs control effect for indoor air quality: Green wall case in smith campus at Harvard University

The emission of volatile organic compounds (VOCs) from interior materials can significantly impact people's health and daily activities, necessitating effective management. In the construction of the interior built environment, plants serve as a suitable means to enhance air quality. They not only function as ecological living materials for air purification and VOCs removal but are also valued for their aesthetic appeal. However, often the emphasis in designing green infrastructure is placed more on the aesthetics of planting design rather than considering plants' ecological properties. This research examines the ability of 12 plant species used in the interior green wall design at Harvard University's Smith Center as a case study to decompose and absorb VOCs through experimental studies. By integrating ecological properties and key factors such as spatial and budget constraints into the design process, this research explores the potential of using an algorithmic model to select plant species capable of reducing interior VOC pollution in green wall design. The significance of this study lies in its contribution to indoor environmental health and environmental management practices through providing a potential plant selection model and suggesting a relevant workflow for interior planting design with the goal of controlling VOC emissions. By leveraging the knowledge gained from experiments on the VOC removal abilities of selected plant species, this study offers a valuable resource for practitioners seeking to create innovative indoor air cleaning and decontamination technologies.

Obtainment and Inoculation of Acinetobacter pittii Strain JJ-2, and Combined Action with Plants for Formaldehyde and CO2 Removal: A Research Study

A formaldehyde-degrading bacterium JJ-2 was isolated from the rhizosphere of Chlorophytum and identified as Acinetobacter pittii by colony morphology and 16S rDNA sequence analysis. Further studies showed that under optimal conditions, JJ-2 could maintain activity for six cycles at an initial formaldehyde concentration of 450 mg L-1. At the same time, the complete degradation time was shortened from 12 to 6 h. When the JJ-2 strain was inoculated into sterile soil, the surface spray method had the best effect, and the removal efficiency of 5 ppm formaldehyde increased by 22.63%. In an actual potted plants system colonized with strain JJ-2, the first and second fumigations (without re-inoculation) increased removal by 1.36 times and 0.92 times during the day and 1.27 times and 2.07 times at night. In addition, in the second fumigation, the plant-bacteria combined system was 693.63 ppm and the plant system was 715.34 ppm, effectively reducing the CO2 concentration. This study provides an economical, ecological, and efficient approach to improve the combined system of plants and bacteria to remove gaseous formaldehyde from indoor air, with a positive impact on carbon neutrality.

Fuelling phytoremediation: gasoline degradation by green wall systems-a case study

The capacity for indoor plants including green wall systems to remove specific volatile organic compounds (VOCs) is well documented in the literature; however under realistic settings, indoor occupants are exposed to a complex mixture of harmful compounds sourced from various emission sources. Gasoline vapour is one of the key sources of these emissions, with several studies demonstrating that indoor occupants in areas surrounding gasoline stations or with residentially attached garages are exposed to far higher concentrations of harmful VOCs. Here we assess the potential of a commercial small passive green wall system, commercially named the 'LivePicture Go' from Ambius P/L, Australia, to drawdown VOCs that comprise gasoline vapour, including total VOC (TVOC) removal and specific removal of individual speciated VOCs over time. An 8-h TVOC removal efficiency of 42.45% was achieved, along with the complete removal of eicosane, 1,2,3-trimethyl-benzene, and hexadecane. Further, the green wall also effectively reduced concentrations of a range of harmful benzene derivatives and other VOCs. These results demonstrate the potential of botanical systems to simultaneously remove a wide variety of VOCs, although future research is needed to improve upon and ensure efficiency of these systems over time and within practical applications.

Evaluating the antioxidative defense response of selected indoor plants against benzene and formaldehyde

Volatile organic compounds (VOCs) such as formaldehyde and benzene are among the key contributors to indoor air pollution. The current situation of environmental pollution is alarming, especially indoor air pollution is becoming a challenge as affecting plants and humans. VOCs are known to adversely affect indoor plants by causing necrosis and chlorosis. In order to withstand these organic pollutants, plants are naturally equipped with an antioxidative defense system. The current research study aimed to evaluate the combined effect of formaldehyde and benzene on the antioxidative response of selected indoor C3 plants including Chlorophytum comosum, Dracaena mysore, and Ficus longifolia. After the combined application of different levels (0, 0; 2, 2; 2, 4; 4, 2; and 4, 4 ppm) of benzene and formaldehyde respectively, in an airtight glass chamber, the enzymatic and non-enzymatic antioxidants were analyzed. Analysis of total phenolics showed a significant increase (10.72 mg GAE/g) in F. longifolia; C. comosum (9.20 mg GAE/g); and D. mysore (8.74 mg GAE/g) compared to their respective controls as 3.76, 5.39, and 6.07 mg GAE/g. Total flavonoids (724 µg/g) were reported in control plants of F. longifolia which were increased to 1545.72 µg/g from 724 µg/g (in control) followed by 322.66 µg/g in D. mysore (control having 167.11 µg/g). Total carotenoid content also increased in D. mysore (0.67 mg/g) followed by C. comosum (0.63 mg/g) in response to increasing the combined dose compared to their control plants having 0.62 and 0.24 mg/g content. The highest proline content was exhibited by D. mysore (3.66 μg/g) as compared to its respective control plant (1.54 μg/g) under a 4 ppm dose of benzene and formaldehyde. A significant increase in enzymatic antioxidants including total antioxidants (87.89%), catalase (59.21 U/mg of protein), and guaiacol peroxidase (52.16 U/mg of protein) was observed in the D. mysore plant under a combined dose of benzene (2 ppm) and formaldehyde (4 ppm) with respect to their controls. Although experimental indoor plants have been reported to metabolize indoor pollutants, the current findings indicate that the combined application of benzene and formaldehyde is also affecting the physiology of indoor plants as well.

Overexpression of CcFALDH from spider plant (Chlorophytum comosum) enhances the formaldehyde removing capacity of transgenic gloxinia (Sinningia speciosa)1

Formaldehyde can cause leukemia and nasopharyngeal cancer in humans, and is a major indoor air pollutant. In this study, to improve the ability of flowering plants to purify formaldehyde, we cloned the CcFALDH gene encoding formaldehyde dehydrogenase (FALDH) from the spider plant (Chlorophytum comosum), which encodes 379 amino acids with the alcohol dehydrogenase (ADH) structural domain, and used it to transform the flowering plant gloxinia (Sinningia speciosa). The FALDH activity of transgenic gloxinia was 1.8-2.7 times that of wild-type (WT) with a considerable increase in formaldehyde stress tolerance. The activities of the antioxidant enzymes SOD, POD, and CAT of transgenic gloxinia were 1.5-2.0 times those of the WT under formaldehyde stress; H₂O₂, O^2-, and MDA contents were markedly lower than those in WT. Liquid formaldehyde and gaseous formaldehyde were metabolized at 2.1-2.8 and 2.1-2.7 times higher rates in transgenic gloxinia than in WT. Our findings indicate that overexpression of CcFALDH can enhance the capacity of flowering plants to metabolize formaldehyde, which provides a new strategy to tackle the indoor formaldehyde pollution problem.

Simultaneous influence of light and CO2 on phytoremediation performance and physiological response of plants to formaldehyde

Phytoremediation technology is an effective method to remove formaldehyde indoors, but the purification capacity and physiological response of plants to formaldehyde under the simultaneous influence of light and CO₂ have not been examined in previous studies. In this study, formaldehyde fumigation experiments were conducted on the C₃ plants Epipremnum aureum A. and Chlorophytum comosum L., and the crassulacean acid metabolism (CAM) plant Dieffenbachia maculate A. The phytoremediation performance and physiological response of plants were studied. The initial concentration of formaldehyde was established at 11.950 ± 1.442 [Formula: see text]; the light intensities were 448 ± 7 [Formula: see text], 1628 ± 22 [Formula: see text], and 3259 ± 22 [Formula: see text], respectively; and the concentrations of CO₂ were 455 ± 29 [Formula: see text], 978 ± 50 [Formula: see text], 2020 ± 66 [Formula: see text], and 3006 ± 95 [Formula: see text], respectively. The results indicated that the highest purification rates of formaldehyde by E. aureum, D. maculata, and C. comosum were 55.8%, 43.7%, and 53.2%, respectively. The light intensity had a positive effect on the formaldehyde purification rates of all three plants and positively stimulated peroxidase (POD) activity, while the CO₂ concentration had no significant impact on the formaldehyde purification capacity and plants' physiological characteristics. Exposure to formaldehyde inhibited formaldehyde dehydrogenase (FADH) activity and positively stimulated catalase (CAT) activity. The superoxide dismutase (SOD) activity positively correlated with the formaldehyde purification capacity of plants.

Phytoremediation as a potential technique for vehicle hazardous pollutants around highways

With the synchronous development of highway construction and the urban economy, automobiles have entered thousands of households as essential means of transportation. This paper reviews the latest research progress in using phytoremediation technology to remediate the environmental pollution caused by automobile exhaust in recent years, including the prospects for stereoscopic forestry. Currently, most automobiles on the global market are internal combustion vehicles using fossil energy sources as the primary fuel, such as gasoline, diesel, and liquid or compressed natural gas. The composition of vehicle exhaust is relatively complex. When it enters the atmosphere, it is prone to a series of chemical reactions to generate various secondary pollutants, which are very harmful to human beings, plants, animals, and the eco-environment. Despite improving the automobile fuel quality and installing exhaust gas purification devices, helping to reduce air pollution, the treatment costs of these approaches are expensive and cannot achieve zero emissions of automobile exhaust pollutants. The purification of vehicle exhaust by plants is a crucial way to remediate the environmental pollution caused by automobile exhaust and improve the environment along the highway by utilizing the ecosystem's self-regulating ability. Therefore, it has become a global trend to use phytoremediation technology to restore the automobile exhaust pollution. Now, there is no scientific report or systematic review about how plants absorb vehicle pollutants. The screening and configuration of suitable plant species is the most crucial aspect of successful phytoremediation. The mechanisms of plant adsorption, metabolism, and detoxification are reviewed in this paper to address the problem of automobile exhaust pollution.

Transport and removal mechanism of benzene by Tradescantia zebrina Bosse and Epipremnum aureum (Linden ex André) G.S. Bunting in air-plant-solution system

Phytoremediation is considered an effective method for indoor air pollution control. The removal rate and mechanism of benzene in air by two plants, Tradescantia zebrina Bosse and Epipremnum aureum (Linden ex André) G. S. Bunting, were investigated through fumigation experiments under the condition of plant hydroponics culturing. Results showed that the plant removal rates increased with increase in benzene concentration in air. When the benzene concentration in air was set at 432.25-1314.75 mg·m^-3, the removal rates of T. zebrina and E. aureum ranged from 23.05 ± 3.07 to 57.42 ± 8.28 mg·kg^-1·h^-1 FW and from 18.82 ± 3.73 to 101.58 ± 21.20 mg·kg^-1·h^-1 FW, respectively. The removal capacity was positively related to the transpiration rate of plants, indicating that gas exchange rate could be a key factor for the evaluation of removal capacity. There existed fast reversible transport of benzene on air-shoot interface and root-solution interface. After shoot exposure to benzene for 1 h, downward transport was the dominant mechanism in the removal of benzene in air by T. zebrina, while in vivo fixation was the dominant mechanism at exposure time of 3 and 8 h. Within 1-8 h of shoot exposure time, in vivo fixation capacity was always the key factor affecting the removal rate of benzene in the air by E. aureum. Contribution ratio of in vivo fixation in the total benzene removal rate increased from 6.29 to 92.29% for T. zebrina and from 73.22 to 98.42% for E. aureum in the experimental conditions. Reactive oxygen species (ROS) burst induced by benzene exposure was responsible for the contribution ratio change of different mechanisms in the total removal rate, which also was verified by the change of activities of antioxidant enzymes (CAT, POD, and SOD). Transpiration rate and antioxidant enzyme activity could be considered parameters to evaluate the plant removal ability to benzene and to screen plants for establishment of plant-microbe combination technology.

A systematic review on mitigation of common indoor air pollutants using plant-based methods: a phytoremediation approach

Environmental pollution, especially indoor air pollution, has become a global issue and affects nearly all domains of life. Being both natural and anthropogenic substances, indoor air pollutants lead to the deterioration of the ecosystem and have a negative impact on human health. Cost-effective plant-based approaches can help to improve indoor air quality (IAQ), regulate temperature, and protect humans from potential health risks. Thus, in this review, we have highlighted the common indoor air pollutants and their mitigation through plant-based approaches. Potted plants, green walls, and their combination with bio-filtration are such emerging approaches that can efficiently purify the indoor air. Moreover, we have discussed the pathways or mechanisms of phytoremediation, which involve the aerial parts of the plants (phyllosphere), growth media, and roots along with their associated microorganisms (rhizosphere). In conclusion, plants and their associated microbial communities can be key solutions for reducing indoor air pollution. However, there is a dire need to explore advanced omics technologies to get in-depth knowledge of the molecular mechanisms associated with plant-based reduction of indoor air pollutants.

Phytoremediation for the indoor environment: a state-of-the-art review

Poor indoor air quality has become of particular concern within the built environment due to the time people spend indoors, and the associated health burden. Volatile organic compounds (VOCs) off-gassing from synthetic materials, nitrogen dioxide and harmful outdoor VOCs such benzene, toluene, ethyl-benzene and xylene penetrate into the indoor environment through ventilation and are the main contributors to poor indoor air quality with health effects. A considerable body of literature over the last four decades has demonstrate the removal of gaseous contaminants through phytoremediation, a technology that relies on plant material and technologies to remediate contaminated air streams. In this review we present a state-of-the-art on indoor phytoremediation over the last decade. Here we present a review of 38 research articles on both active and passive phytoremediation, and describe the specific chemical removal efficiency of different systems. The literature clearly indicates the efficacy of these systems for the removal of gaseous contaminants in the indoor environment, however it is evident that the application of phytoremediation technologies for research purposes in-situ is currently significantly under studied. In addition, it is common for research studies to assess the removal of single chemical species under controlled conditions, with little relevancy to real-world settings easily concluded. The authors therefore recommend that future phytoremediation research be conducted both in-situ and on chemical sources of a mixed nature, such as those experienced in the urban environment like petroleum vapour, vehicle emissions, and mixed synthetic furnishings off-gassing. The assessment of these systems both in static chambers for their theoretical performance, and in-situ for these mixed chemical sources is essential for the progression of this research field and the widespread adoption of this technology.

Modeling and optimization approach for phytoremediation of formaldehyde from polluted indoor air by Nephrolepis obliterata plant

This study aimed to model the removal of formaldehyde as an indoor air pollutant by Nephrolepis obliterata (R.Br.) J.Sm. plant using response surface methodology (RSM) and artificial neural network (ANN) models, and optimization of the models by particle swarm optimization algorithm (PSO). The data obtained in pilot-scale experiments under a controlled environment were used in this study. The effects of parameters on the removal efficiency such as formaldehyde concentration, relative humidity, light intensity, and leaf surface area were empirically investigated and considered as model parameters. The results of the RSM model, with power transformation, were in meaningful compromise with the experiments. A multilayer perceptron (MLP) neural network was also designed, and the mean of squared error (MSE), mean absolute error (MAE), and R² were used to evaluate the network. Several training algorithms were assessed and the best one, the Levenberg Marquardt (LM), was selected. The PSO algorithm proved that the highest removal efficiency of formaldehyde was obtained in the presence of light, maximum leaf surface area and relative humidity, and at the lowest inlet concentration. The empirical system breakthrough occurred at 15 mg/m³ of formaldehyde, and the maximum elimination capacity was about 0.96 mg per m² of leaves. The findings indicated that the ANN model predicted the removal efficiency more accurately compared to the RSM model.

New Insight into Short Time Exogenous Formaldehyde Application Mediated Changes in Chlorophytum comosum L. (Spider Plant) Cellular Metabolism

Chlorophytum comosum L. plants are known to effectively absorb air pollutants, including formaldehyde (HCHO). Since the metabolic and defense responses of C. comosum to HCHO are poorly understood, in the present study, biochemical changes in C. comosum leaves induced by 48 h exposure to exogenous HCHO, applied as 20 mg m^-3, were analyzed. The observed changes showed that HCHO treatment caused no visible harmful effects on C. comosum leaves and seemed to be effectively metabolized by this plant. HCHO application caused no changes in total chlorophyll (Chl) and Chl a content, increased Chl a/b ratio, and decreased Chl b and carotenoid content. HCHO treatment affected sugar metabolism, towards the utilization of sucrose and synthesis or accumulation of glucose, and decreased activities of aspartate and alanine aminotransferases, suggesting that these enzymes do not play any pivotal role in amino acid transformations during HCHO assimilation. The total phenolic content in leaf tissues did not change in comparison to the untreated plants. The obtained results suggest that HCHO affects nitrogen and carbohydrate metabolism, effectively influencing photosynthesis, shortly after plant exposure to this volatile compound. It may be suggested that the observed changes are related to early HCHO stress symptoms or an early step of the adaptation of cells to HCHO treatment. The presented results confirm for the first time the direct influence of short time HCHO exposure on the studied parameters in the C. comosum plant leaf tissues.

Effects of airflow rate and plant species on formaldehyde removal by active green walls

Formaldehyde is a hazardous volatile organic compound (VOC) listed as a Group 1 carcinogen by the International Agency for Research on Cancer. The active green wall system is a promising technology that utilizes active airflow passing through plants grown along a vertical alignment to increase their mass exposure to pollutants. However, few studies have investigated the effect of airflow rate on their efficacy for formaldehyde removal, and plant-mediated effects are unknown. This study assessed the formaldehyde removal ability of the active green wall using dynamic experiments. Three levels of airflow rate (30, 50, and 65 m³·h^-1) and inlet formaldehyde concentration (1.0, 2.0, and 3.5 mg·m^-3) were used and three plant species were investigated. The removal of formaldehyde by active green walls was significantly (P < 0.01) affected by the airflow rate, formaldehyde concentration, and plant species. The single pass removal efficiency varying from 38.18 to 94.42% decreased as the airflow rate and formaldehyde concentration increased. The elimination capacity varied from 189 to 1154 mg·m^-2·h^-1 and increased with the inlet formaldehyde loading rate. Significant differences in formaldehyde removal effectiveness among the plant species were observed with Chlorophytum comosum performing the best, followed by Schefflera octophylla, with Chamaedorea elegans being the worst.

A review of plants formaldehyde metabolism: Implications for hazardous emissions and phytoremediation

The wide use of hazardous formaldehyde (CH₂O) in disinfections, adhesives and wood-based furniture leads to undesirable emissions to indoor environments. This is highly problematic as formaldehyde is a highly hazardous and toxic compound present in both liquid and gaseous form. The majority of gaseous and atmospheric formaldehyde derive from microbial and plant decomposition. However, plants also reversibly absorb formaldehyde released from for example indoor structural materials in such as furniture, thus offering beneficial phytoremediation properties. Here we provide the first comprehensive review of plant formaldehyde metabolism, physiology and remediation focusing on release and absorption including species-specific differences for maintaining indoor environmental air quality standards. Phytoremediation depends on rhizosphere, temperature, humidity and season and future indoor formaldehyde remediation therefore need to take these biological factors into account including the balance between emission and phytoremediation. This would pave the road for remediation of formaldehyde air pollution and improve planetary health through several of the UN Sustainable Development Goals.

Phytoremediation of indoor formaldehyde by plants and plant material

Formaldehyde evolves from various household items and is of environmental and public health concern. Removal of this contaminant from the indoor air is of utmost importance and currently, various practices are in the field. Among these practices, indoor plants are of particular importance because they help in controlling indoor temperature, moisture, and oxygen concentration. Plants and plant materials studied for the purpose have been reviewed hereunder. The main topics of the review are, mechanism of phytoremediation, plants and their benefits, plant material in formaldehyde remediation, and airtight environmental and health issues. Future research in the field is also highlighted which will help new researches to plan for the remediation of formaldehyde in indoor air. The remediation capacity of several plants has been tabulated and compared, which gives easy access to assess various plants for remediation of the target pollutant. Challenges and issues in the phytoremediation of formaldehyde are also discussed.Novelty statement: Phytoremediation is a well-known technique to mitigate various organic and inorganic pollutants. The technique has been used by various researchers for maintaining indoor air quality but its efficiency under real-world conditions and human activities is still a question and is vastly affected relative to laboratory conditions. Several modifications in the field are in progress, here in this review article we have summarized and highlighted new directions in the field which could be a better solution to the problem in the future.

Cadmium Phytotoxicity, Tolerance, and Advanced Remediation Approaches in Agricultural Soils; A Comprehensive Review

Cadmium (Cd) is a major environmental contaminant due to its widespread industrial use. Cd contamination of soil and water is rather classical but has emerged as a recent problem. Cd toxicity causes a range of damages to plants ranging from germination to yield suppression. Plant physiological functions, i.e., water interactions, essential mineral uptake, and photosynthesis, are also harmed by Cd. Plants have also shown metabolic changes because of Cd exposure either as direct impact on enzymes or other metabolites, or because of its propensity to produce reactive oxygen species, which can induce oxidative stress. In recent years, there has been increased interest in the potential of plants with ability to accumulate or stabilize Cd compounds for bioremediation of Cd pollution. Here, we critically review the chemistry of Cd and its dynamics in soil and the rhizosphere, toxic effects on plant growth, and yield formation. To conserve the environment and resources, chemical/biological remediation processes for Cd and their efficacy have been summarized in this review. Modulation of plant growth regulators such as cytokinins, ethylene, gibberellins, auxins, abscisic acid, polyamines, jasmonic acid, brassinosteroids, and nitric oxide has been highlighted. Development of plant genotypes with restricted Cd uptake and reduced accumulation in edible portions by conventional and marker-assisted breeding are also presented. In this regard, use of molecular techniques including identification of QTLs, CRISPR/Cas9, and functional genomics to enhance the adverse impacts of Cd in plants may be quite helpful. The review's results should aid in the development of novel and suitable solutions for limiting Cd bioavailability and toxicity, as well as the long-term management of Cd-polluted soils, therefore reducing environmental and human health hazards.

Roles of exogenous plant growth regulators on phytoextraction of Cd/Pb/Zn by Sedum alfredii Hance in contaminated soils

Plant growth regulators (PGRs) assisted phytoextraction was investigated as a viable phytoremediation technology to increase the phytoextraction efficiency in contaminated soils. This study aimed to evaluate the cadimum (Cd)/lead (Pb)/zinc (Zn) phytoextraction efficiency by a hyperaccumulator Sedum alfredii Hance (S. alfredii) treated with 9 PGRs, including indole-3-acetic acid (IAA), gibberellin (GA₃), cytokinin (CKs), abscisic acid (ABA), ethylene (ETH), brassinosteroid (BR), salicylic acid (SA), strigolactones (SL) and jasmonic acid (JA), in slightly or heavily contaminated (SC and HC, respectively) soil. Results demonstrated that PGRs were able to improve S. alfredii biomass, the most significant increases were observed in GA₃ and SL for HC soil, while for SC soil, IAA and BR exhibited positive effects. The levels of Cd, Pb and Zn in the shoots of S. alfredii treated with ABA and SL were noticeably greater than in the CK treatment in HC soil, while the uptake of metals were increased by IAA and CKs in SC soil. Combined with the results of biomass and metal contents in shoots, we found that ABA showed the highest Cd removal efficiency and the maximum Pb and Zn removal efficiency was observed with GA₃, which was 62.99%, 269.23%, and 41.18%, respectively higher than the control in HC soil. Meanwhile, compared to control, the maximum removal efficiency of Cd by IAA treatment (52.80%), Pb by JA treatment (165.1%), and Zn by BR treatment (44.97%) in the SC soil. Overall, our results suggested that these PGRs, especially, ABA, SL, IAA, BR and GA₃ had great potential in improving phytoremediation efficiency of S. alfredii grown in contaminated soils.

Cadmium Uptake and Growth Responses of Seven Urban Flowering Plants: Hyperaccumulator or Bioindicator?

The application of flowering plants is the basis of urban forest construction. A newly-found flowering hyperaccumulator is crucial for remediating urban contaminated soil sustainably by cadmium (Cd). This study evaluated growth responses, Cd uptake and bioaccumulation characteristics of seven urban flowering plants. Based on growth responses of these plants, Calendula officinalis L. showed high tolerance to at least 100 mg kg−1 Cd, in terms of significant increase in biomass and with no obvious changes in height. After 60 d exposure to 100 mg kg−1 Cd, the accumulated Cd in shoots of the plant reached 279.51 ± 13.67 μg g−1 DW, which is above the critical value defined for a hyperaccumulator (100 μg g−1 DW for Cd). Meanwhile, the plant could accumulate Cd to as much as 926.68 ± 29.11 μg g−1 DW in root and 1206.19 ± 23.06 μg g−1 DW in plant, and had higher Cd uptake and bioaccumulation values. According to these traits, it is shown that Calendula officinalis L. can become a potential Cd-hyperaccumulator for phytoremediation. By contrast, Dianthus caryophyllus L. is very sensitive to Cd stress in terms of significantly decreased biomass, height and Cd uptake, indicating the plant is considered as a Cd-bioindicator.

Plant-based remediation of air pollution: A review

Humans face threats from air pollutants present in both indoor and outdoor environments. The emerging role of plants in remediating the atmospheric environment is now being actively investigated as a possible solution for this problem. Foliar surfaces of plants (e.g., the leaves of cotton) can absorb a variety of airborne pollutants (e.g., formaldehyde, benzene, trimethylamine, and xylene), thereby reducing their concentrations in indoor environments. Recently, theoretical and experimental studies have been conducted to offer better insights into the interactions between plants and the surrounding air. In our research, an overview on the role of plants in reducing air pollution (often referred to as phytoremediation) is provided based on a comprehensive literature survey. The major issues for plant-based research for the reduction of air pollution in both outdoor and indoor environments are discussed in depth along with future challenges. Analysis of the existing data confirms the effectiveness of phytoremediation in terms of the absorption and purification of pollutants (e.g., by the leaves and roots of plants and trees), while being controlled by different variables (e.g., pore characteristics and planting patterns). Although most lab-scale studies have shown that plants can effectively absorb pollutants, it is important for such studies to reflect the real-world conditions, especially with the influence of human activities. Under such conditions, pollutants are to be replenished continually while the plant surface area to ambient atmosphere volume ratio vastly decreases (e.g., relative to lab-based experiments). The replication of such experimental conditions is the key challenge in this field of research. This review is expected to offer valuable insights into the innate ability of various plants in removing diverse pollutants (such as formaldehyde, benzene, and particulate matter) under different environmental settings.

Phytoremediation by ornamental plants: a beautiful and ecological alternative

Phytoremediation is an eco-friendly and economical technology in which plants are used for the removal of contaminants presents in the urban and rural environment. One of the challenges of the technique is the proper destination of the biomass of plants. In this context, the use of ornamental plants in areas under contamination treatment improves landscape, serving as a tourist option and source of income with high added value. In addition to their high stress tolerance, rapid growth, high biomass production, and good root development, ornamental species are not intended for animal and human food consumption, avoiding the introduction of contaminants into the food web in addition to improving the environments with aesthetic value. Furthermore, ornamental plants provide multiple ecosystem services, and promote human well-being, while contributing to the conservation of biodiversity. In this review, we summarized the main uses of ornamental plants in phytoremediation of contaminated soil, air, and water. We discuss the potential use of ornamental plants in constructed buffer strips aiming to mitigate the contamination of agricultural lands occurring in the vicinity of sources of contaminants. Moreover, we underlie the ecological and health benefits of the use of ornamental plants in urban and rural landscape projects. This study is expected to draw attention to a promising decontamination technology combined with the beautification of urban and rural areas as well as a possible alternative source of income and diversification in horticultural production.

Phytoremediation: The Sustainable Strategy for Improving Indoor and Outdoor Air Quality

Most of the world’s population is exposed to highly polluted air conditions exceeding the WHO limits, causing various human diseases that lead towards increased morbidity as well as mortality. Expenditures on air purification and costs spent on the related health issues are rapidly increasing. To overcome this burden, plants are potential candidates to remove pollutants through diverse biological mechanisms involving accumulation, immobilization, volatilization, and degradation. This eco-friendly, cost-effective, and non-invasive method is considered as a complementary or alternative tool compared to engineering-based remediation techniques. Various plant species remove indoor and outdoor air pollutants, depending on their morphology, growth condition, and microbial communities. Hence, appropriate plant selection with optimized growth conditions can enhance the remediation capacity significantly. Furthermore, suitable supplementary treatments, or finding the best combination junction with other methods, can optimize the phytoremediation process.

Current State of Indoor Air Phytoremediation Using Potted Plants and Green Walls

Urban civilization has a high impact on the environment and human health. The pollution level of indoor air can be 2–5 times higher than the outdoor air pollution, and sometimes it reaches up to 100 times or more in natural/mechanical ventilated buildings. Even though people spend about 90% of their time indoors, the importance of indoor air quality is less noticed. Indoor air pollution can be treated with techniques such as chemical purification, ventilation, isolation, and removing pollutions by plants (phytoremediation). Among these techniques, phytoremediation is not given proper attention and, therefore, is the focus of our review paper. Phytoremediation is an affordable and more environmentally friendly means to purify polluted indoor air. Furthermore, studies show that indoor plants can be used to regulate building temperature, decrease noise levels, and alleviate social stress. Sources of indoor air pollutants and their impact on human health are briefly discussed in this paper. The available literature on phytoremediation, including experimental works for removing volatile organic compound (VOC) and particulate matter from the indoor air and associated challenges and opportunities, are reviewed. Phytoremediation of indoor air depends on the physical properties of plants such as interfacial areas, the moisture content, and the type (hydrophobicity) as well as pollutant characteristics such as the size of particulate matter (PM). A comprehensive summary of plant species that can remove pollutants such as VOCs and PM is provided. Sources of indoor air pollutants, as well as their impact on human health, are described. Phytoremediation and its mechanism of cleaning indoor air are discussed. The potential role of green walls and potted-plants for improving indoor air quality is examined. A list of plant species suitable for indoor air phytoremediation is proposed. This review will help in making informed decisions about integrating plants into the interior building design.

A review on phytoremediation of contaminants in air, water and soil

There is a global need to use plants to restore the ecological environment. There is no systematic review of phytoremediation mechanisms and the parameters for environmental pollution. Here, we review this situation and describe the purification rate of different plants for different pollutants, as well as methods to improve the purification rate of plants. This is needed to promote the use of plants to restore the ecosystems and the environment. We found that plants mainly use their own metabolism including the interaction with microorganisms to repair their ecological environment. In the process of remediation, the purification factors of plants are affected by many conditions such as light intensity, stomatal conductance, temperature and microbial species. In addition the efficiency of phytoremediation is depending on the plants species-specific metabolism including air absorption and photosynthesis, diversity of soil microorganisms and heavy metal uptake. Although the use of nanomaterials and compost promote the restoration of plants to the environment, a high dose may have negative impacts on the plants. In order to improve the practicability of the phytoremediation on environmental restoration, further research is needed to study the effects of different kinds of catalysts on the efficiency of phytoremediation. Thus, the present review provides a recent update for development and applications of phytoremediation in different environments including air, water, and soil.

Exogenous hemin improves Cd2+ tolerance and remediation potential in Vigna radiata by intensifying the HO-1 mediated antioxidant defence system

The present study evaluated the effects of exogenous hemin on cadmium toxicity in terms of metal accretion and stress resilience in Vigna radiata L. (Wilczek). One-week-old seedlings were treated with CdCl₂ (50 μM) alone and in combination with hemin (0.5 mM) in half-strength Hoagland medium for 96 h. The optimum concentrations of Cd and hemin were determined on the basis of haem oxygenase-1 activity. The results demonstrated that under Cd stress, plants accumulated a considerable amount of metal in their tissues, and the accumulation was higher in roots than in leaves, which significantly reduced the plant biomass and chlorophyll content by increasing the oxidative stress (MDA and H₂O₂ content). However, hemin supplementation under Cd,-stress improved plant growth by enhancing the harvestable biomass and photosynthetic pigments, increasing antioxidant activities (SOD, APX, POD, HO-1 and proline), lowering oxidative damage and increasing Cd tolerance in plants. Furthermore, the application of hemin enhances the removal efficiency of Cd in V. radiata by increasing the uptake of Cd via roots and its translocation from roots to foliar tissues. Thus, the study suggests that hemin has the potential to improve the stress tolerance and phytoremediation ability of heavy metal-tolerant plants so that they can be used instead of hyperaccumulators for remediation of Cd-contaminated environments.

A rapid method to assess the formaldehyde dehydrogenase activity in plants for the remediation of formaldehyde

The formaldehyde dehydrogenase (FADH) activity in plants is essential to the removal of airborne formaldehyde (FA) by plants. A rapid and efficient method was established to assess the FADH activity in plants by analyzing the efficiencies of the extracts of fresh and enzyme-inactivated leaves to degrade FA, with the enzyme-inactivated leaves prepared by freezing with liquid nitrogen. The efficiencies of airborne FA dissipated by different plants were evaluated through the FA fumigation experiments using four selected plants, with the results analyzed against the calculated leaf FADH activities. Fresh and enzyme-inactivated leaf extracts degraded FA to different extents. The degradative efficiencies of leaf extracts were positively related to the initial FA test levels at 6-18 mg l^-1. The relative plant-leaf FADH activities formed the order of Chenopodium album L. > Atenia cordifolia > Plantain > Aloe, which was in line with the observed FA dissipating efficiencies of the plants exposed to 0.72 mg m^-3 airborne FA for 24 h. Other dominant degrading mechanisms in plant leaves resulted in higher dissipating efficiencies of Plantain over that of Atenia cordifolia when exposed to 1.56 mg m^-3 FA for 24 h. The established method could be applied to estimate the FADH activity in plants for assessment of the plant remediation efficiency of FA in air at lower concentrations.

Indoor formaldehyde removal by three species of Chlorophytum comosum under dynamic fumigation system: part 2-plant recovery

Spider plants (Chlorophytum comosum) are known to be among the most common easy mountable indoor plants capable of purifying indoor air by absorbing carbon monoxide, formaldehyde, xylene, and many other hazardous gases. In addition, these plants are non-toxic and safe for pets and children. This project is focused on the investigation of the spider plants' capability of the formaldehyde purification under laboratory-controlled parameters of the indoor air environment. Two scenarios including employment of fresh plants as well as recovered ones damaged by 7-day exposure of formaldehyde were considered. A special attention was made to the investigation of physiological indexes of the plant leaves after damage, and whether the spider plant could be reused after its recovery. The physiological characteristics of the recovery period of potted Chlorophytum comosum immediately after 7 days of fumigation with formaldehyde were studied. Eight physiological indexes of leaves including chlorophyll, free protein, relative conductivity, MDA (malondialdehyde, lipid peroxidation), SOD (superoxide dismutase), POD (peroxidase), T-AOC (total antioxidant capacity), and stomata were selected to monitor plants' recovery processes. The results of 30-day experimental runs showed that three species of spider plants were mostly recovered within 15 days. Repeated 7-day fumigation of plants, conducted to study their ability to effectively clean the air after regeneration, confirmed such ability; the efficiency at the first day was similar to the performance of the fresh plant. However, from the second day, the efficiency was dropped by 35-50% and remained at these levels for the rest of the exercise.

Identification of Organic Volatile Markers Associated with Aroma during Maturation of Strawberry Fruits

In the present study, organic volatile markers of three strawberry varieties (Albion, Festival and Frontera) during the maturation process were investigated. Forty metabolites associated with aroma in fresh strawberries were monitored during seven stages of maturation using gas chromatography–mass spectrometry (GC-MS) equipped with headspace-solid phase microextraction (HS-SPME). The data were evaluated using multivariate analysis to observe correlations between the organic volatile compound profile and the seven phenological stages of maturation for each strawberry variety. The dynamic levels of butanoic acid methyl ester, hexanoic acid methyl ester, octylcyclohexane, cyclohexane,1,1,2-trimethyl, linalool, tetradecane, and α-muurolene underwent distinctive changes in concentration during the maturation process. The multivariate analysis also allowed the identification of these compounds as possible volatile markers to measure the maturation of strawberry fruits in all three varieties. These findings highlight the importance of the timing of harvest and maturation stage in each variety to preserve or improve the desirable aromatic characteristics of strawberry fruits.

Biological-based methods for the removal of volatile organic compounds (VOCs) and heavy metals

The current scenario of increased population and industrial advancement leads to the spoliation of freshwater and tapper of the quality of water. These results decrease in freshwater bodies near all of the areas. Besides, organic and inorganic compounds discharged from different sources into the available natural water bodies are the cause of pollution. The occurrence of heavy metals in water and volatile organic compounds (VOCs) in the air is responsible for a vast range of negative impacts on the atmosphere and human health. Nonetheless, high uses of heavy metals for human purposes may alter the biochemical and geochemical equilibrium. The major air contaminants which are released into the surroundings known as VOCs are produced through different kinds of sources, such as petrochemical and pharmaceutical industries. VOCs are known to cause various health hazards. VOCs are a pivotal group of chemicals that evaporate readily at room temperature. To get over this problem, biofiltration technology has been evolved for the treatment of heavy metals using biological entities such as plants, algae, fungi, and bacteria. Biofiltration technology is a beneficial and sustainable method for the elimination of toxic pollutants from the aquatic environment. Various types of biological technologies ranging from biotrickling filters to biofilters have been developed and they are cost-effective, simple to fabricate, and easy to perform. A significant advantage of this process is the pollutant that is transformed into biodegradable trashes which can decompose within an average time period, thus yielding no secondary pollutants. The aim of this article is to scrutinize the role of biofiltration in the removal of heavy metals in wastewater and VOCs and also to analyze the recent bioremediation technologies and methods.

Recent progress on removal of indoor air pollutants by catalytic oxidation

Indoor air pollutant is a serious problem due to its wide diversity and variability. The harmful substances from construction materials and decorative materials may make the indoor air pollution become more and more serious and cause serious health problems. In this paper, the review summarizes the advanced technologies for the removal of indoor air pollutants and the development in the treatment of indoor air pollution by catalytic oxidation technologies. Meanwhile, some catalytic oxidation mechanisms of indoor air pollutants are proposed in detail, and suggestions for the indoor air pollution treatment are also presented, in order to provide some reference for subsequent research.

Effects of indoor plants on air quality: a systematic review

No study has comprehensively reviewed the effects of indoor plants on air quality; therefore, this study systematically reviewed quantitative empirical research on these effects in both English and Chinese. The information sources were the Web of Science and WanFang Data Knowledge Service Platform electronic databases. Only journal articles reporting quantitative empirical research were selected. The eligibility criteria included studies with (1) interventions of any indoor plant, excluding biofilters that combine power facilities and vegetation, (2) comparators included within the same experimental treatment or between different experimental treatments, (3) air quality effects objectively measured using any instrument, and (4) any study design. Both authors screened 95 journal articles and compiled information according to (1) intervention (plant species, foliage, or medium), (2) scientific family name of each plant, (3) study design (experiment, field experiment, or survey), (4) air quality (e.g., temperature, humidity, negative ions, radiation, and dust), (5) pollutants, (6) research environment, (7) ventilation (types and rates), (8) climate (lighting, temperature, and humidity), (9) exposure duration, (10) sampling frequency or period, and (11) number of replications. The primary effects of the potential of the indoor plants on air quality were reduced pollutant levels (particularly formaldehyde, benzene, and toluene removal), followed by increase in humidity and decrease in temperature. In addition, including various plant species could improve the effects of indoor vegetation on ameliorating air quality and microclimate conditions.

Effect of arrangement and quantity of epipremnum aureum on work efficiency and subjective perceptions

Plants can improve indoor air quality, and affect the work efficiency and subjective perceptions. However, the conclusions of existing experiments regarding how plants affect work efficiency are not uniform. To further explore this subject, this study designed five different working conditions, and selected a variety of "general tasks" and "tasks requiring concentration" as operational tasks. The effects of the plant arrangement and quantity on work efficiency were studied by analyzing the performance of subjects in different working conditions. The effects of the plants on the subjective perceptions were investigated using questionnaires. The experimental results show that the effects of plants on work efficiency were related to the nature of the work, the placement of the plants, and the number of plants. Plants had no effect on the efficiency of general tasks such as "symmetry breadth," but had a positive impact on the efficiency of general tasks such as "operational breadth." Moreover, by changing the arrangement and quantity of plants, the efficiency of general tasks could be increased by up to 19.1%. In contrast, plants placed within a coincident view had a negative impact on the efficiency of "tasks requiring concentration," and the work efficiency could be reduced by up to 12.4%. In addition, plants could increase enthusiasm and willingness to work by 12.5% and 11.8%, respectively.

Phytoremediation of cadmium (Cd) and uranium (U) contaminated soils by Brassica juncea L. enhanced with exogenous application of plant growth regulators

This investigation was made to examine the role of indole-3-acetic acid (IAA), gibberellin A3 (GA₃), 6-Benzylaminopurine (6-BA), and 24-epibrassinolide (EBL) in improving stress tolerance and phytoremediation of the cadmium (Cd) and uranium (U) by mustard (Brassica juncea L.). The optimum concentrations of IAA, GA₃, 6-BA, and EBL were determined based on plant biomass production, metal uptake, translocation, and removal efficiency. The biomass and total chlorophyll content decreased under Cd and U stress. Nevertheless, the application of IAA, GA₃, and 6-BA significantly (p < 0.05) increased the growth and total chlorophyll content of mustard. The malondialdehyde (MDA) and H₂O₂ content of mustard were enhanced under Cd and U stress, but they were significantly (p < 0.05) decreased in plant growth regulators (PGRs) treatments (except for EBL). PGRs treatments increased activities of antioxidant enzymes such as superoxide dismutase, peroxidase, catalase, and ascorbate peroxidase, thus reducing the oxidative stress. Furthermore, the shoot uptake of Cd and U of IAA and EBL treatments was significantly (p < 0.05) higher than that of other treatments. IAA and EBL also have more significant effects on the translocation and remediation of Cd and U compared to GA₃ and 6-BA. The removal efficiency of Cd and U reached the maximum in the 500 mg L^-1 IAA treatment, which was 330.77% and 118.61% greater than that in the control (CK), respectively. These results suggested that PGRs could improve the stress tolerance and efficiency of phytoremediation using B. juncea in Cd- and U- contaminated soils.

Indoor formaldehyde removal by three species of Chlorphytum Comosum under the long-term dynamic fumigation system

Gaseous formaldehyde removal efficiency and physiological characteristics of leaves were investigated through a dynamic fumigation system. Three different species of potted Chlorophytum Comosum, (Green Chlorophytum Comosum for its green leaves), CC (Combined the leaves of Chlorophytum Comosum with leaves half green and half white) and PC (Purple Chlorophytum Comosum for its purple leaves), were exposed to formaldehyde for 7 days. The results showed formaldehyde removal efficiencies in the daytime were 71.07% ± 0.23, 84.66% ± 0.19, and 46.73% ± 0.15 at 1 ppm for GC, CC, and GC plants, respectively, and were 36.21% ± 0.24, 62.15% ± 0.19, and 34.97% ± 0.11 at night. This might be due to higher plant physiological activities (e.g., photosynthesis, respiration, and transpiration) during the daytime than at night. Ten physiological indicators of leaves were chosen to evaluate the 7-day fumigation process, which were chlorophyll, free protein, relative conductivity, malondialdehyde (MDA), hydrogen peroxide (H₂O₂), hydroxyl radical, superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and total antioxidant capacity (T-AOC). Eight of these indicators increased, while chlorophyll decreased by 22.16%, 6.95%, and 25.32%, and CAT decreased by 18.9%, 17.8%, and 25.30% for GC, CC, and PC respectively. Among all the increasing physiological indicators, relative conductivity and MDA showed the greatest increase by 279.32% and 155.56% for PC. A 15-day recovery study was also conducted using MDA and T-AOC as indicators. The results showed that all the tested plants could be tolerant up to the 8 ppm of formaldehyde concentration for 7 days under dynamic fumigation and needed 10-15 days for self-recovery.

Preparation of RGO/TiO2/Ag Aerogel and Its Photodegradation Performance in Gas Phase Formaldehyde

To increase the utilization ratio and catalytic efficiency of the nano TiO2, The RGO/TiO2/(Ag) powders and RGO/TiO2/Ag aerogel photocatalyst were designed and prepared. The composition and microstructure of RGO/TiO2/(Ag) powders and RGO/TiO2/Ag aerogel were studied, in addition, the photocatalytic activity of RGO/TiO2/(Ag) powders and RGO/TiO2/Ag aerogel was researched by the photocatalytic degradation behavior of formaldehyde solution and formaldehyde gas respectively. The result indicate that TiO2 is uniformly loaded on the surface of RGO with a particle size of 10 nm to 20 nm. When the amount of graphene oxide added is 1 wt%, RGO/TiO2 powder has the highest degradation effect on formaldehyde solution, in addition, the introduction of Ag can greatly improve the photocatalytic effect of the sample. The results also show that the pore size of RGO/TiO2/Ag aerogel is between 7.6 nm and 12.1 nm, and the degradation rate of formaldehyde gas is 77.08% within 2 hours.

Medical management, prevention and mitigation of environmental risks factors in Neurology

The human environment and exposures arising therefrom are major contributors to neurological disorders ranging from stroke to neurodegenerative diseases. Reduction of exposure to environmental risk factors, with the goal of disease prevention or control, is addressed at the individual as well as the societal level and in recognition of differential subject vulnerability. We examine some practical solutions in high-income countries that may allow a better adaptation to environmental risks and reduce their adverse impact on the nervous system. We consider the citizen's role in reducing unhealthy exposures and explore new approaches to treatment.

Assisted Deposition of PM2.5 from Indoor Air by Ornamental Potted Plants

This study clarifies whether vegetation can promote the decrease of indoor PM2.5 concentration. The indoor PM2.5 concentration in two periods of 2013 in Wuhan city was simulated by cigarette burning in a series of sealed chambers. Six common indoor potted plants were selected as samples to investigate the effect of plants on PM2.5 decline. The effects of potted plants on PM2.5 decline were analyzed from three aspects: plant species, leaf characteristics and relative humidity. The results show that the presence of potted plants accelerated the decline of PM2.5. The additional removal rates (excluding gravity sedimentation of PM2.5 itself) for Aloe vera and Epipremnum aureum were 5.2% and 30% respectively, when the initial PM2.5 concentration was around 200 μg/m3. The corresponding values were 0% and 17.2%, respectively, when the initial PM2.5 was around 300 μg/m3. Epipremnum aureum was the optimum potted plant for PM2.5 sedimentation, due to its rough and groove leaf surface, highest LAI (leaf area index, 2.27), and strong humidifying capacity (i.e., can promote chamber humidity to 65% in 30–60 minutes.). Actual indoor studies have also confirmed that a certain amount of Epipremnum aureum can promote the decrease of indoor PM2.5. This paper provides insights on reducing the concentration of fine particulate matter by indoor greening efforts.

The application of plant growth regulators to improve phytoremediation of contaminated soils: A review

Soil contamination is one of the most important environmental problems around the world. The transfer of organic contaminants and heavy metals to the food chain is a major threat to human health. Purging these contaminants often involves a lot of energy and complex engineering processes. Phytoremediation technology can be used in various environments, such as water, soil, and air, to reduce or eliminate different contaminants. The major mechanisms involved in phytoremediation include plant extraction, rhizofiltration, plant evaporation, plant stabilization, plant decomposition, and rhizosphere degradation. The efficiency of phytoremediation can be increased through using chelating and acidifying agents, applying electric current in the soil, using organic chemicals and fertilizers, planting transgenic plants, using bacteria, and applying plant growth regulators. Recently, the use of plant growth regulators has been investigated as a suitable method for improving the efficacy of phytoremediation. Effective plant growth regulators to improve phytoremediation include auxins, gibberellins, cytokinins, and salicylic acid. The activity of these materials depends on their concentration, environmental factors that affect their absorption, and the physiological state of the plant. Using these materials increases the biomass of the plant and reduces the negative effects of the presence of contaminants in the plant. The present study aimed to review the latest studies performed on the improvement of phytoremediation using plant growth regulators and their mechanisms.

Evaluation of hyperaccumulation potentials to cadmium (Cd) in six ornamental species (compositae)

Phytoremediation is considered as a promising soil remediation technique. In the present study, the growth responses, cadmium (Cd) accumulation and uptake capability of six popular compositae species, namely, Taraxacum mongolicum Hand.-Mazz., Tagetes erecta L., Tagetes patula L., Zinnia elegans Jacq., Centaurea cyanus L. and Gerbera jamesonii Bolus under Cd stress were investigated. Among the six compositae species, the growth of T. erecta L. and T. patula L. improved under 10 mg kg^-1 Cd exposure in term of the total biomass and height increased along with the increased Cd concentration in soil, and the growth of the two plants had no significant differences at the high Cd concentration (100 mg kg^-1), which indicated that they have good tolerance to Cd toxicity. At the same time, the two plants have higher biomass than four other plants. Furthermore, they can accumulate Cd above 100 μg g^-1dry tissue, which is the threshold value of a Cd-hyperaccumulator, and have higher Cd uptake ability, translocation factor (TF) and bioconcentration factor (BCF) values. According to these traits, it was shown that T. erecta L. and T. patula L. had strong tolerance and accumulation capability to Cd, therefore they can become potential hyperaccumulators in phytoremediation of Cd-contaminated soils.

The basic roles of indoor plants in human health and comfort

Humans have a close relationship with nature, and so integrating the nature world into indoor space could effectively increase people's engagement with nature, and this in turn may benefit their health and comfort. Since people spend 80-90% of their time indoors, the indoor environment is very important for their health. Indoor plants are part of natural indoor environment, but their effect on the indoor environment and on humans has not been quantified. This review provides a comprehensive summary of the role and importance of indoor plants in human health and comfort according to the following four criteria: photosynthesis; transpiration; psychological effects; and purification. Photosynthesis and transpiration are important mechanisms for plants, and the basic functions maintaining the carbon and oxygen cycles in nature. Above all have potential inspiration to human's activities that people often ignored, for example, the application of solar panel, artificial photosynthesis, and green roof/facades were motivated by those functions. Indoor plants have also been shown to have indirect unconscious psychological effect on task performance, health, and levels of stress. Indoor plants can act as indoor air purifiers, they are an effective way to reduce pollutants indoor to reduce human exposure, and have been widely studied in this regard. Indoor plants have potential applications in other fields, including sensing, solar energy, acoustic, and people's health and comfort. Making full use of various effects in plants benefit human health and comfort.

Towards practical indoor air phytoremediation: A review

Indoor air quality has become a growing concern due to the increasing proportion of time people spend indoors, combined with reduced building ventilation rates resulting from an increasing awareness of building energy use. It has been well established that potted-plants can help to phytoremediate a diverse range of indoor air pollutants. In particular, a substantial body of literature has demonstrated the ability of the potted-plant system to remove volatile organic compounds (VOCs) from indoor air. These findings have largely originated from laboratory scale chamber experiments, with several studies drawing different conclusions regarding the primary VOC removal mechanism, and removal efficiencies. Advancements in indoor air phytoremediation technology, notably active botanical biofilters, can more effectively reduce the concentrations of multiple indoor air pollutants through the action of active airflow through a plant growing medium, along with vertically aligned plants which achieve a high leaf area density per unit of floor space. Despite variable system designs, systems available have clear potential to assist or replace existing mechanical ventilation systems for indoor air pollutant removal. Further research is needed to develop, test and confirm their effectiveness and safety before they can be functionally integrated in the broader built environment. The current article reviews the current state of active air phytoremediation technology, discusses the available botanical biofiltration systems, and identifies areas in need of development.

Biomonitoring levels of airborne metals around Urmia Lake using deciduous trees and evaluation of their tolerance for greenbelt development

In the northwest of Iran, the dust of salty and toxic metals possibly caused due to drying Urmia Lake is threatening the health of surrounding communities. This study aimed to employ leaves of local deciduous trees for biomonitoring of toxic elements and to evaluate air pollution tolerance of the trees for greenbelt application. Sampling from leaves of four dominant tree species including Vitis vinifera, Juglans regia, Ulmus umbraculifera, and Popolus alba was carried out from gardens in two radial distances (5 and 10 km) around the Urmia Lake accounting for 16 sites. The concentration of metals in the leaves were extracted according to method USEPA method 3050B and measured by ICP AES technique. According to the levels of air pollution tolerance index (APTI), Popolus alba showed to be more sensitive to air pollution and can be applied for biomonitoring. The ranks of heavy metals and sodium concentrations in the leaves gained in the order of Na > Zn > Cu > Ni > Pb > As > Cd. The mean enrichment factor for the elements was calculated from 1 to 3, suggesting minor enrichment for them. As, Pb, and Na with similar spatial distribution were dominantly observed in northwest and center-east of the Urmia Lake. Potential ecological risk (PER) index showed a moderate risk in 6% of sampling zones, where Cd and As were identified as responsible pollutants. Principle component and correlation analysis between the elements depicted human sources such as industrial activity and road traffic for Cd, Cu, Ni, Pb, and Zn, whereas As and Na were most likely originated from the aerosols of Urmia Lake. Our findings showed that Popolus alba can be applied as a local biomonitor and Vitis vinifera with moderate tolerance can be used as a good air pollutant sink in greenbelt development around the drying Urmia Lake in the northwest of Iran.

Tuning the interlayer cations of birnessite-type MnO2 to enhance its oxidation ability for gaseous benzene with water resistance

The Cu–MnO₂ catalyst exhibited good resistance to high-temperature deactivation and water poisoning as well as good stability during long-term testing.