Removal of Cd, Pb, Zn, Cu in smelter soil by citric acid leaching

Study on remediation of cadmium contaminated paddy field by ramie (Boehmeria nivea L.) floating island and its supporting technology

Ramie (Boehmeria nivea L.) is an ideal crop for cadmium (Cd) pollution remediation due to its advantages of both remediating and utilizing, however, it is mainly carried out in dry land, whose restoration effect is relatively slow. Previously, we found that the ramie plants cultivated by hydroponics has several tens of times higher Cd absorption capacity than that planted in soil. However, the issue of how to use hydroponic ramie to remediate Cd contaminated paddy fields needs to be addressed. In this study, we innovatively developed the ramie floating island technology and studied its remediation model on simulated Cd contaminated paddy fields. Different ramie varieties were used to compare the remediation effects, and the results showed that there were differences in adaptability among different varieties on floating islands and the remediation ability of the tested ramie varieties was Z2 > Z1 > Z3. Different harvested times were set to analyze the effects of harvested model on remediation, and it was suggested that multiple harvests can be carried out according to the plant growth status of ramie floating island after 30 days of remediation to achieve better remediation effects. Low water level height (5 cm) of paddy field was beneficial for the accumulation of Cd in the roots, but considering the adaptability of various ramie varieties and the effect of long-term restoration, it was recommended that the water level height of 20 cm for the cultivation of ramie floating island was more suitable. Moreover, we found that low concentration of citric acid (≤2 g L-1) or polyaspartic acid (≤3 g L-1) can improve the remediation effects for ramie floating island. Our study opens up a novel approach for ramie to remediate heavy metal pollution and provides a technical reference for water body Cd remediation by plants.

The influence of cysteine in transformation of Cd fractionation and microbial community structure and functional profile in contaminated paddy soil

Remediating cadmium (Cd) contaminated paddy soil is vital for agroecology, food safety, and human health. Soil washing is more feasible to reduce remediation method due to its high efficiency. However, green, low-cost and more efficient washing agents are still required. In this study, we investigated the ability of cysteine as a washing agent for soil washing to remove Cd from contaminated paddy soil. Through a batch experiment, we evaluated the removal efficiency of cysteine as a washing agent by comparing their removal rate with that of a microbial inoculant and sulphuric acid as other washing agents. The transformation of Cd fractionation and microbial community structure and functional profile in paddy soils after cysteine leaching was studied by using sequential extraction and high-throughput sequencing. Results showed that cysteine had better efficiency in the removal of Cd from paddy soil in comparison to sulphuric acid and the microbial inoculant, and could achieve a maximum removal rate of 97 % Cd in paddy soil. Cysteine decreased the proportion of Cd in the exchangeable fraction, carbonate bound fraction, iron and manganese bound fraction, and organic matter bound fraction and was best for the removal of the residual fraction, which contributed to its higher Cd removal ability. Considering the economic benefits of the reagents used, cysteine was shown to be economically feasible for use as a leaching agent. In addition, cysteine could significantly increase the relative abundance of Thermochromatium, Sideroxydans, Streptacidiphilus, and Frankia which promoted the nitrogen and sulfur metabolism in the paddy soil. In summary, this study revealed that cysteine was readily available, cheap, non-toxic, highly efficient, and even has fertilizing properties, making it eco-friendly and ideal for remediation of Cd-contaminated paddy soils. Besides, the health of paddy soils would also benefit from cysteine's promotion of microbial nitrogen and sulfur metabolism.

Study on the remediation of heavy metal contaminated soils by citric acid and polyepoxysuccinic acid complex leaching

Soil leaching remediation has attracted extensive attention because of its good removal effect, short operation period and stable removal effect of heavy metals. The key to reduce the harm of heavy metal contaminated soil to the environment and human health is to use appropriate leachate to repair heavy metal contaminated soil. In this study, citric acid (CA), iron nitrate (Fe(NO3)3) and polyepoxysuccinic acid (PESA) with different concentrations were used as research reagents to explore the best combination of leaching effects of heavy metals (Cu, Zn, Pb, Cd) in contaminated soil. The effects of concentration of eluent, liquid to solid ratio and leaching time on leaching efficiency of heavy metals and the changes of soil physical and chemical properties before and after leaching were studied. The results showed that 0.5 mol/L CA and 0.05 mol/L PESA were combined according to the volume ratio of 7:3, and the leaching effect was the best when the liquid-solid ratio was 15 and the leaching time was 240 min. Under the optimal leaching condition, the four heavy metals in the soil had significant removal effects, and the removal rates were, respectively, 86.06% Cu, Zn 74.55%, Pb 67.88% and Cd 91.63%. The X-ray spectrum and Fourier infrared spectrum analysis of soil before and after leaching showed that CA-PESA combined leaching had little effect on soil structure change. This study provided theoretical support for the development and application of suitable leaching agents for the remediation of heavy metal-contaminated soil.

One-step processing of waste dredged slurry into planting soil by targeted pretreatment and vacuum filtration

A novel method, targeted pretreatment and vacuum filtration (TP-VF), is introduced and validated in this study. TP-VF offers a one-step solution for efficiently dewatering dredged slurry (DS) characterized by heavy metal contamination, high salinity, and excessive moisture content. This innovative approach combines targeted pretreatment (TP) and vacuum filtration (VF) to transform DS into the viable planting soil. TP encompasses a dual optimization strategy that enhances both slurry dewatering efficiency and the quality of the resultant planting soil (cake). By employing flocculation pretreatment, TP increases the size of flocs and enlarges cake pores, leading to improvements in dewatering efficiency and infiltration rates. Additionally, targeted pretreatment results in the discharge of approximately 90% of heavy metal ions and most salts with the filtrate. Remarkably, the addition of chelating agents and freshwater as part of the pretreatment process positively impacts soil quality without compromising floc size or dewatering efficiency. Comparatively, TP-VF demonstrates a substantial reduction of 35.81% in operational costs when contrasted with the traditional two-step process, concurrently diminishing the potential for secondary environmental pollution. This study highlights TP-VF as a promising advancement in sustainable slurry management, addressing pressing environmental challenges while optimizing resource utilization.

New-style electrokinetic-adsorption remediation of cadmium-contaminated soil using double-group electrodes coupled with chitosan-activated carbon composite membranes

Global soil cadmium (Cd(II)) contamination threatens the soil environment, food safety, and human health. Conventional electrokinetic remediation (EKR) and enhancement methods usually operate in strong electric fields, leading to strong side reactions and uneven removal. In this work, to remove Cd(II) from soil effectively in a low-voltage electric field, a new-style electrokinetic-adsorption remediation using double-group electrodes coupled with chitosan-activated carbon composite membranes (DE-EKR-CAC) was developed. Chitosan-activated carbon (CAC) composite membranes were synthesized for easy recovery and reuse of adsorbents. The effects of pH, contact time, initial concentration, and foreign ions on the removal of Cd(II) by the CAC composite membranes were determined. The CAC composite membranes performed well except in a strongly acidic environment (pH = 2.0). The soil pH varied between 3.4 and 5.0 in DE-EKR-CAC, where the CAC composite membranes were applicable. High concentrations of Ca2+ interfered with the adsorption of Cd(II), which means that the selectivity of CAC composite membranes for Cd(II) is not high enough. The Langmuir (R2 = 0.999) and pseudo-second-order kinetic (R2 = 1.0) models revealed the monolayer coverage and chemisorption mechanism, and the maximum adsorption capacity was 40.81 mg/g. Furthermore, SEM, FTIR, and XPS analyses suggest that physical adsorption, complexation of oxygen-containing functional groups, chelation of amino groups, and ion exchange are potential mechanisms for the adsorption of Cd(II) on CAC. DE-EKR-CAC performed better than the group remediated with one set of electrodes, with higher removal efficiencies and more uniform removal. The lowest energy consumption was 3.33 kWh/m3, which is lower than other enhancement methods. Separation of CAC composite membranes from soil is easy, and reuse performance is good. DE-EKR-CAC provides a potential option for Cd(II) removal from soil because of its better performance using low-voltage direct current, low energy consumption, and ease of recycling the adsorbent.

Non-negligibly negative role of e-waste-derived pyrogenic carbon in the soil washing of copper and polybrominated diphenyl ethers

The open incineration of electrical and electronic waste (e-waste) results in the accumulation of pyrogenic carbon in the soil. However, the effect of the e-waste-derived pyrogenic carbon (E-PyC) on the performance of soil washing at e-waste incineration sites remains unclear. In this study, the effectiveness of a citrate-surfactant mixed solution in removing copper (Cu) and decabromodiphenyl ether (BDE209) at two e-waste incineration sites was evaluated. The removal efficiencies of Cu (24.6-51.3%) and BDE209 (13.0-27.9%) were low in both soils and were not significantly improved by ultrasonic. Soil organic matter analysis, hydrogen peroxide and thermal pretreatment experiments, and microscale soil particle characterization demonstrated that the poor removal of soil Cu and BDE209 was due to steric effects of E-PyC on the release of the solid fraction of pollutants and the competitive sorption of the labile fraction of pollutants by E-PyC. Weathering of soil Cu weakened the influence of E-PyC but strengthened the negative impact of natural organic matter (NOM) on soil Cu removal by promoting complexation between NOM and Cu2+ ions. This study demonstrates that the negative effect of E-PyC on Cu and BDE209 removal by soil washing is non-negligible, which has implications for decontaminating e-waste incineration sites by soil washing.

Influence of the Extraction Solution on the Removal of Heavy Metals from Polluted Soils

Soil pollution with heavy metals is a problem for the whole geosystem. The aim of the research is to identify new solutions for extracting heavy metals from polluted soils so that they can be further exploited. To this end, investigations of the physicochemical characteristics of the soil sample under study were carried out. Following the analyses, the soil was characterised as lute-coarse sand (UG) with a strongly acidic pH (4.67), a hygroscopicity coefficient (CH = 4.8% g/g), and a good supply of nutrients: nitrogen (Nt): 0.107%; mobile phosphorus (PAL): 6 mg kg-1 and mobile potassium (KAL): 26 mg kg-1, but is low in humus (2.12%). The metal content of the soil was determined by atomic absorption spectrometry (AAS), and the analyses showed high concentrations of metals (Pb: 27,660 mg kg-1; Cu: 5590 mg kg-1; Zn: 2199 mg kg-1; Cd: 11.68 mg kg-1; Cr: 146 mg kg-1). The removal of metals (Pb, Cu, Zn, Cd, and Cr) from polluted soil by different extraction agents (water, humus, malic acid, chitosan, and gluconic acid) was investigated. Metal extraction experiments were carried out in a continuous orbital rotation-oscillation stirrer at a solid/liquid/ (S/L ratio; g:mL) of 1:4, at two concentrations of extraction solution (1% and 3%), and at different stirring times (2, 4, 6, and 8 h). The yield of the extraction process is very low for all proposed extraction solutions. The maximum values of extraction efficiency are: 0.5% (Pb); 3.28% (Zn); and 5.72% (Cu). Higher values were obtained in the case of Cr (11.97%) in the variant of using humus 3% as an extraction solution at a stirring time of 6 h. In the investigated experimental conditions, the best removal efficiencies were obtained in the case of cadmium (26.71%) when using a 3% malic acid solution. In conclusion, it is considered that, from case to case, the type of extraction solution as well as the nature of the metal influence the mechanism of the depollution process, i.e., the capacity of the fine soil granules to free themselves from the pollutant metal that has adhered to them, and further research is considered necessary in the future.

Effect of ultrasound-assisted EDTA and citric acid washing on heavy metal removal, residual heavy metal mobility, and sewage sludge quality

We investigated the effects of ultrasound-assisted ethylenediaminetetraacetic acid (EDTA) and citric acid (CA) washing on heavy metal (HM) removal, residual HM mobility, and sewage sludge quality. EDTA and CA washing of sewage sludge successfully reduced the total concentration of HMs after one round of washing, but the mobility of residual HMs increased significantly. The eluate had a high concentration of HMs and nutrients (nitrogen, phosphorus, potassium, and total organic carbon), although the nutritional content of the sludge remained high. The three-phase ratio of the sludge after six rounds of washing by CA was closest to the ideal three-phase ratio, and the degree of influence on the physical structure of the soil after a land application was reduced, according to the fluctuation of generalized soil structure index (GSSI) and soil three-phase structure distance (STPSD) values. The results indicate that CA as an environmental-friendly washing agent can be the superior choice for sludge HM washing; single washing of sewage sludge may increase the mobility of residual HMs, so multiple washings should be considered for land application of sludge.

Release and mobility characteristics of thallium from polluted farmland in varying fertilization: Role of cation exchange

Batch and column leaching tests were used to study thallium's release and migration behaviour and evaluate its potential toxicity risks in soil. The results indicated that leaching concentrations of Tl using TCLP and SWLP were much higher than the threshold, indicating a high risk of thallium pollution in the soil. Furthermore, the intermittent leaching rate of Tl by Ca²⁺ and HCl reached its maximum value, demonstrating the easy release of Tl. After HCl leaching, the form of Tl in the soil has changed, and ammonium sulfate has increased its extractability. Additionally, the extensive application of calcium promoted the release of Tl, increasing its potential ecological risk. Spectral analysis showed that Tl was mainly present in minerals such as Kaolinite and Jarosite, and exhibited significant adsorption capacity for Tl. HCl and Ca²⁺ damaged the crystal structure of the soil, greatly enhancing the migration and mobility of Tl in the environment. More importantly, XPS analysis confirmed that the release of Tl (I) in the soil was the leading cause of increased mobility and bioavailability. Therefore, the results revealed the risk of Tl release in the soil, providing theoretical guidance for its pollution prevention and control.

Investigating the use of Aspergillus niger fermentation broth as a washing treatment for arsenic and antimony co-contaminated soil

High concentrations of arsenic and antimony contamination in soil are a potential risk to the ecological environment and human health. Soil washing can effectively and permanently reduce the soil contamination. This study used Aspergillus niger fermentation broth as a washing agent to remove As and Sb from contaminated soil. Characterization of organic acids in the fermentation broth by high-performance liquid chromatographic (HPLC) and chemically simulated leaching experiments revealed that oxalic acid played a significant role in removing As and Sb from the soil. The effect of washing conditions on the metal removal rate of Aspergillus niger fermentation broth was investigated by batch experiments, and the optimal conditions were determined: no dilution, pH 1, L/S ratio 15:1, and leaching at 25 °C for 3 h. The soils were washed three times under optimal conditions, with 73.78%, 80.84%, and 85.83% removal of arsenic and 65.11%, 76.39%, and 82.06% removal of antimony, respectively. The results of metal speciation distribution in the soil showed that the fermentation broth could effectively remove As and Sb on amorphous Fe/Al hydrous oxides in soil. The analysis of X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) of soils before and after washing showed that the washing of Aspergillus niger fermentation broth had a minor effect on the structural changes of soils. After washing, soil organic matter and soil enzyme activity were increased. Thus, Aspergillus niger fermentation broth shows excellent potential as a washing agent for removing As and Sb from soils.

Green remediation of Ni, Zn, and Cu in an electroplating contaminated site by wood vinegar with optimization and risk assessment

Wood vinegar (WV) is a renewable organic compound, possessing characteristics such as high oxygenated compound content and low negative impact on soil. Based on its weak acid properties and complexing ability to potentially toxic elements (PTEs), WV was used to leach Ni, Zn, and Cu contaminated soil in electroplating sites. In addition, the response surface methodology (RSM) based on the Box-Behnken design (BBD) was established to clarify the interaction between each single factor, and finally completed the risk assessment of the soil. The amounts of PTEs leached from the soil climbed with the increase of WV concentration, liquid-solid ratio, and leaching time, while they surged with the decrease of pH. Under optimal leaching circumstances (the concentration of WV= 100 %; washing time= 919 min; pH= 1.00), the removal rates of Ni, Zn, and Cu could reach 91.7 %, 57.8 %, and 65.0 %, respectively, and the WV-extracted PTEs were mainly from the Fe-Mn oxides fraction. After leaching, the Nemerow integrated pollution index (NIPI) decreased from an initial value of 7.08 (indicating severe pollution) to 0.450 (indicating no pollution). The potential ecological risk index (RI) dropped from 274 (medium level) to 39.1 (low level). Additionally, the potential carcinogenic risk (CR) values reduced by 93.9 % for both adults and children. The results revealed that the washing process significantly reduced the pollution level, potential ecological risk, and health risk. Coupled with FTIR and SEM-EDS analysis, the mechanism of WV removal of PTEs could be explained from three aspects: acid activation, H⁺ ion exchange, and functional group complexation. In summary, WV is an eco-friendly and high-efficiency leaching material for the remediation of PTEs polluted sites, which will maintain soil function and protect human health.

Effect of organic acids and soil particle size on heavy metal removal from bulk soil with washing

To evaluate the effect of soil particle size on heavy metals removal by washing, two soil samples were collected around a lead-zinc mining area (SM) and lead-zinc smelter (SS). The total content of Cd, Pb and Zn in SM and SS were determined. And the effect of soil particle size on Cd removal by low molecular organic acids was studied. The results showed that Cd was the main pollutant and the total content of Cd in SS can reach to 24.8 mg Kg^-1. 68.4% of the total Cd in SM existed in the form of residual state, while 54.7% of the total Cd in SS was in weak acid extractable state. About 50.0% of the Cd distributed in < 2 μm soil size fraction. The washing results indicated that citric acid was a highly efficient eluent among the five low molecular weight organic acids (citric acid, malic acid, tartaric acid, oxalic acid and acetic acid). After washing, 40% and 69.6% of the total Cd in SS and SM can be removed by citric acid, respectively. While only 18.7-40.2% and 32.6-68.7% of Cd was removed from different size fractions of SM and SS, respectively. The species of Cd in soil size fractions affected the removal effect of citric acid. The citric acid can easily remove the weak acid extractable and reducible form of Cd in soil. After eluted by citric acid, the bioavailability of Cd in soil decreased markedly, and the highest decreasing rate reached 93%.

Antimony and naphthalene can be simultaneously leached from a combined contaminated soil using carboxymethyl-β-cyclodextrin as a biodegradable eluant

In this study, we have investigated the removal efficiency of antimony (Sb) and naphthalene (Nap) from a combined contaminated soil by carboxymethyl-β-cyclodextrin (CMCD) leaching and reveal its remediation mechanisms by FTIR and ¹H NMR analyses. The results show that the highest removal efficiencies of Sb and Nap were 94.82% and 93.59%, respectively, with a CMCD concentration of 15 g L^-1 at a pH of 4 and a leaching rate of 2.00 mL min^-1 over an interval-time of 12 h. The breakthrough curves show that CMCD had a stronger inclusion capacity of Nap than Sb, and Sb could enhance the adsorption capacity of Nap, while Nap weakened the adsorption of Sb during CMCD leaching. Furthermore, the FTIR analysis suggests that the removal of Sb from combined contaminated soil involved complexation with the carboxyl and hydroxyl groups on CMCD, and the NMR analysis suggests that the inclusion of Nap occurred. These results indicate that CMCD is a good eluant for remediating soil contaminated by a combination of heavy metals and polycyclic aromatic hydrocarbons (PAHs), and its remediation mechanisms depend on the complexation reactions between the surface functional groups and inclusion reactions in the internal cavities.

Microwave-assisted recovery of lead from electrolytic manganese anode sludge using tartaric acid and NaOH

In this study, a new metallurgical system for treating electrolytic manganese anode sludge by microwave roasting and alkaline leaching system was developed, and the lead leaching behaviour was studied. The XRD results show that Pb in anode sludge is mainly in the form of PbSO₄ after microwave roasting at 850°C, as a result, the leaching rate of Pb is improved. The results show that the leaching rate of lead can reach 93.89% under the conditions of liquid-solid ratio of 7:1, leaching time of 30 min, leaching temperature of 40°C, and the concentration of sodium hydroxide of 8%. The addition of tartaric acid can further improve the lead leaching rate, FT-IR analysis showed that the coordination form of lead and tartaric acid. Lead and tartaric acid ions (L) form three coordination compounds, PbL, Pb₂L₂ and Pb₂L₃, which can only exist in alkaline solution.

Effect of Soil Washing with an Amino-Acid-Derived Ionic Liquid on the Properties of Cd-Contaminated Paddy Soil

To reduce contamination levels in Cd-contaminated paddy soil while retaining soil characteristics, we have studied the Cd-removing ability of 15 different amino acid-based ionic liquids, which are considered to be green solvents, as soil washing agents and their impact on soil. The results indicated that the glycine hydrochloride ([Gly][Cl]) removed the most Cd, and under optimized conditions could remove 82.2% of the total Cd. Encouragingly, the morphology of the soil had not been significantly changed by the washing process. After the soil was rinsed twice with water and the pH was adjusted to 6.2 by adding Ca(OH)₂, the germination index of the rice increased by 7.5%. The growth of the rice was also stimulated, with lengths and weights of the rice plants increasing by 56% and 32%, respectively, after two weeks. These experiments demonstrate that amino-acid-derived ionic liquids can be promising soil-washing agents of Cd-contaminated paddy soil.

Soil heavy metal pollution from Pb/Zn smelting regions in China and the remediation potential of biomineralization

Smelting activities pose serious environmental problems due to the local and regional heavy metal pollution in soils they cause. It is therefore important to understand the pollution situation and its source in the contaminated soils. In this paper, data on heavy metal pollution in soils resulting from Pb/Zn smelting (published in the last 10 years) in China was summarized. The heavy metal pollution was analyzed from a macroscopic point of view. The results indicated that Pb, Zn, As and Cd were common contaminants that were present in soils with extremely high concentrations. Because of the extreme carcinogenicity, genotoxicity and neurotoxicity that heavy metals pose, remediation of the soils contaminated by smelting is urgently required. The primary anthropogenic activities contributing to soil pollution in smelting areas and the progressive development of accurate source identification were performed. Due to the advantages of biominerals, the potential of biomineralization for heavy metal contaminated soils was introduced. Furthermore, the prospects of geochemical fraction analysis, combined source identification methods as well as several optimization methods for biomineralization are presented, to provide a reference for pollution investigation and remediation in smelting contaminated soils in the future.

The migration and accumulation of typical pollutants in the growing media layer of bioretention facilities

A series of complex physical and chemical processes, such as interception, migration, accumulation, and transformation, can occur when pollutants in stormwater runoff enter the growing media layer of bioretention facilities, affecting the purification of stormwater runoff by bioretention facilities. The migration and accumulation of pollutants in the growing media layer need long-term monitoring in traditional experimental studies. In this study, we established the Hydrus-1D model of water and solution transport for the bioretention facilities. By analyzing the variation of cumulative fluxes of NO3--N and Pb with time and depth, we investigated pollutant migration and accumulation trends in the growing media layer of bioretention facilities. It can provide support for reducing runoff pollutants in bioretention facilities. The Hydrus-1D model was calibrated and verified with experimental data, and the input data (runoff pollutant concentration) for the pollutant concentration boundary was obtained from the SWMM model. The results demonstrated that the cumulative fluxes of NO3--N and Pb increased with the passage of simulation time and depth of the growing media layer overall. From the top to the bottom of the growing media layer, the change rates of the peak cumulative fluxes of NO3--N and Pb were strongly linked with their levels in the runoff. An increase in rainfall decreased the content of NO3--N and Pb in the growing media layer, and this phenomenon was more obvious in the lower part of the layer.

Effects of microwave and plastic content on the sulfur migration during co-pyrolysis of biomass and plastic

In order to reduce the risks of sulfur-containing contaminants present in biofuels, the effects of microwave and content of hydrogen donor on the cracking of C-S bonds and the migration of sulfur were studied by co-pyrolysis of biomass and plastic. The synergistic mechanism of microwave and hydrogen donor was explored from the perspective of deducing the evolution of sulfur-containing compounds based on microwave thermogravimetric analysis. By combining temperature-weight curves, it was found that microwaves and hydrogen radicals promoted the cracking of sulfur-containing compounds and increased the mass loss of biomass during pyrolysis. The mixing ratio of hydrogen donor (plastic) was the key parameter resulting in the removal of sulfur from oil. By adjusting the mixing ratio, the yield of co-pyrolyzed oil was three times higher than that of cow dung pyrolysis alone and the relative removal rate of sulfur reached 73.67%. The relative content of sulfur in the oil was reduced by 73.77% due to the escape of sulfur-containing gases (H₂S, COS and C₂H₅SH) and the formation of sulfate crystals in the char. Microwave selectively heated sulfur-containing organics and hydrogen radicals stimulated the breaking of C-S bonds, which improved the cracking efficiency of the oil. This breaking will provide a theoretical and technological reference for the environmentally friendly treatment of biomass and biofuels.

Citric acid-based deep eutectic solvent (CA-DES) as a new soil detergent for the removal of cadmium from coking sites

In order to solve the problem of soil pollution caused by excess heavy metals, cadmium (Cd), a novel soil-washing agent organic chelating acid-based deep eutectic solvent (OCA-DES), was investigated for the removal of Cd from the contaminated soil of coking plant. Four kinds of OCA-DES were prepared by mixing choline chloride (Ch-Cl) with four organic chelating acids (citric acid, oxalic acid, tartaric acid, and malic acid), respectively, to compare their washing efficiency of Cd from soil. The effects of washing operation conditions on the Cd removal efficiency were investigated. Side effects of citric acid-based deep eutectic solvent (CA-DES) on soil were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR). The results showed that CA-DES had the best Cd removal efficiency and could reach as high as 93.75%, under ideal conditions. CA-DES mainly washed extractable and reducible Cd. The CA-DES washing process has less side effects on soil and hardly eroded the soil or changed the mineral structure of the soil. The main roles of CA-DES washing Cd include (1) hydrogen bonds capturing Cd; (2) the carboxyl group(-COOH) forming soluble chelate with Cd; and (3) releasing H⁺ ions in exchange for Cd. This study demonstrates that CA-DES, a novel soil-washing agent, has excellent removal of cadmium from soil and is environment-friendly.

Biogeochemical behavior and pollution control of arsenic in mining areas: A review

Arsenic (As) is one of the most toxic metalloids that possess many forms. As is constantly migrating from abandoned mining area to the surrounding environment in both oxidation and reducing conditions, threatening human health and ecological safety. The biogeochemical reaction of As included oxidation, reduction, methylation, and demethylation, which is closely associated with microbial metabolisms. The study of the geochemical behavior of arsenic in mining areas and the microbial remediation of arsenic pollution have great potential and are hot spots for the prevention and remediation of arsenic pollution. In this study, we review the distribution and migration of arsenic in the mining area, focus on the geochemical cycle of arsenic under the action of microorganisms, and summarize the factors influencing the biogeochemical cycle of arsenic, and strategies for arsenic pollution in mining areas are also discussed. Finally, the problems of the risk control strategies and the future development direction are prospected.

Immobilization of hexavalent chromium in soil-plant environment using calcium silicate hydrate synthesized from coal gangue

The presence of excessive hexavalent chromium (Cr(VI)) in the contaminated soils and plants has become a global environmental issue due to its toxicity and carcinogenicity. This work investigated the feasibility of immobilizing Cr(VI) in the soil-plant environment using calcium silicate hydrate (C-S-H) synthesized from coal gangue. The results revealed that the C-S-H amendment increased soil pH and organic matter (OM), which further promoted Cr(VI) immobilization. Results also revealed that exchangeable and carbonate bound fractions of Cr were either converted into Fe/Mn oxide and OM bound fractions of Cr or hardly released residual fraction of Cr due to C-S-H treatment. The C-S-H accelerated conversion of Cr(VI) into Cr(III) promoting plant growth and alleviating the toxic effect of Cr(VI). Cr(VI) was mainly immobilized and accumulated in the plant roots which resulted in comparatively lower Cr(VI) content in the edible part of plants. The exchangeable fraction of Cr in soil could be used as a bioavailability evaluation index of Cr(VI) in plants. In short, C-S-H was proved to be a practical and environmentally friendly amendment for in-situ immobilization of Cr(VI) contaminated soil.

Environmental risks caused by livestock and poultry farms to the soils: Comparison of swine, chicken, and cattle farms

The lack of treatment systems for pollutants in family-livestock and poultry sites results in large amounts of untreated manure and urine being directly discharged to environment. The risks from veterinary antibiotic (VA) and heavy metal (HM) exposure in the rural environment require further research. In this investigation, 221 samples (feed, manure, surface soil, soil profiles, water, and plant) were collected from 41 livestock and poultry farms (swine, chichen, and cattle). Copper (Cu), zinc (Zn), oxytetracycline (OTC), and enrofloxacin (ENR) were frequently detected in the samples. Metals and VAs in sandy loam soils were more inclined to migrate to deep layers than those in loam soils. Copper and Zn in the polluted soils mainly existed in available forms, which facilitated their migration to deep soil layers. In this study, OTC was also observed to migrate more easily to deeper soil layers than ENR due to its relatively high pKa value. Eighteen antibiotic resistance genes (ARGs) and 5 metal resistance genes (MRGs) along with one mobile genetic element (MGE) occurred in the soils at 80 cm depth. Luteimonas, Clostridium_sensu_stricto_1, and Rhodanobacter were dominant genera detected in the soil samples from different sites, which might increase migration of ARGs or degradation of VAs. An ecological risk assessment suggested that VAs posed threats to the growth of Triticum aestivum L, Cucumis sativus L, and Brassiaca chinensis L. Remediation techniques including biochar/modified biochar, anaerobic digestion, and manure composting should be developed urgently for joint HM and VA pollution.

Activated recovery of PVC from contaminated waste extension cord-cable using a weak acid

Waste electronic and electrical equipment are complex mixtures of valuable and/or toxic materials, which pose serious challenges in their recycling or disposal, for example, electrical transmission wires insulated in polyvinyl chloride materials. These materials are frequently found contaminated with toxic chemical elements, such as Pb, Hg, Cr, or Cd, and are discarded without decontamination. To resolve this problem, we developed a microwave-assisted extraction process to remove toxic metals from plastic e-waste. We processed diluted (30 wt%) citric acid at 210 °C for 1 h inside a pressurized vessel heated by microwave, and found it was suitable not only for the extraction of the toxic metals (∼100%) but also for a significant plastic recovery (>50 wt%). To predict an optimized process window, the support vector regression machine learning algorithm was applied, which reduced the amount of experimentation required while still giving accurate results. Conditions optimized for the reference sample also led to maximum extraction of toxic metals from real-life extension cord waste. We also report that the recovered plastic's properties remained intact after the extraction.

Removal mechanisms of Cd from water and soil using Fe-Mn oxides modified biochar

The development of remediation materials simultaneously suitable for Cd-contaminated water and soil is of great significance. In this study, the functional biochar (FM-RBC and FM-DBC) was prepared using branch and durian shell biochar (RBC and DBC, respectively) with iron-manganese oxide (Fe-Mn oxide) modification. The behaviors and mechanisms of Cd adsorption and stabilization in water and alkaline soil treated with FM-RBC and FM-DBC were explored. The results showed that the adsorption capacities of RBC and DBC for Cd had increased by 40-80 mg/g after the Fe-Mn oxide modification. The Cd adsorption was conformed to pseudo-second-order kinetic and the Langmuir isothermal models. After 35 days of soil cultivation, the maximum reduction rate of DTPA-Cd occurred in 3% FM-DBC treatments (37.73%), followed by in 3% FM-RBC (30.08%), all of which were significantly higher than that observed in 3% BC treatments (12.55-18.91%). Notably, the FM-RBC and FM-DBC treatments promoted the conversion of the exchangeable to the carbonate-bound and Fe/Mn oxyhydroxide fractions of Cd. The XRD, FTIR, and XPS analyses demonstrated that the loading amount of Fe-Mn oxide was positively correlated with the oxygen-containing functional group of biochar. CdO, Cd₂Mn₃O₈ and CdCO₃ were loaded on the FM-BC, indicating the existence of two main adsorption mechanisms: (1) the complexation with M-O (M: Fe, Mn) and acid oxygen-containing functional groups, (2) the precipitation with carbonate of Cd. In this work, we prepared two functional biochar that rapidly removes Cd from water and effectively fixes Cd in alkaline soil, thus, debasing the risk of Cd entry into the food chain.

Sequential washing and eluent regeneration with agricultural waste extracts and residues for facile remediation of meta-contaminated agricultural soils

Washing with organic acids and dissolved organic carbon (DOC) is a promising technique for effective removal of potentially toxic metals from agricultural soils and the two key factors are the screening of inexpensive, high-efficiency, and environmentally friendly washing agents and the safe treatment of waste eluent. We used extracts from agro-forestry wastes (pineapple peel, lemon peel, grapefruit peel and gardening crabapple fruit) to develop a facile two-stage sequential washing method (extracts and/or citric acid (CA) and coupled with extracts) and regenerated waste eluent. The washing efficiencies of Cd and Cu were significantly increased by pineapple peel (PP) using two-stage sequential washing with the sequence of PP + CA-PP > CA-PP > PP-PP. The potential pollution risk from soil Cd was lowered by 33.0% from moderate to low risk, and soil nutrient contents increased. 80.9% of Cd and 81.3% of Cu in waste eluent were efficiently removed by the PP residues. The removal mechanisms of metals in soils and eluents by PP washing agents and residues can be attributed to acid activation, cation exchange and complexation between metal ions and carboxyl groups. Therefore, the PP extracts and residues are potentially suitable for the removal of Cd and Cu from polluted agricultural soils and washing waste eluents.

Geochemical partitioning and spatial distribution of heavy metals in soils contaminated by lead smelting

Heavy metals (HMs) pollution is a universal and complex problem at lead smelting sites. Further understanding on the distribution, coexistence relationship and occurrence form of multi-metals in soils should be taken prior to restoration on the contaminated sites. In this study, 222 soil samples in a typical abandoned lead smelting site were investigated to understand the spatial distribution and geochemical partitioning of HMs. The results showed that soil quality was seriously threatened by As, Pb and Cd, which expressed high spatial heterogeneity. Integration of sequential extraction, X-ray photoelectron spectroscopy and mineral liberation analysers were employed to qualify the geochemical partitioning of HMs. The data showed that Pb and As were mainly partitioned in the reducible phase and residue phase, where the maximum of As were 18% and 79%, and the maximum of Pb were 31% and 64%, respectively, whilst Cd was mainly partitioned with residue phase (about 25%) and weakly acid soluble phase (about 18%). Paulmooreite was the major important mineral host for Pb and As, whereas Cd predominantly existed in willemite. These minerals containing HMs could usually with Fe reside in the octahedral layer of clay minerals such as montmorillonite, and may also reside in the interlayer. Quartz, montmorillonite and goethite were closely associated with HMs minerals in contaminated soils, which limited vertical migration of HMs and potential risks to groundwater. The results enhanced the understanding of spatial distribution and occurrence behavior of HMs, whilst providing potential benefits to heavy metal stabilization and risks control at abandoned non-ferrous metal smelting sites.

Cadmium, lead and arsenic contamination in an abandoned nonferrous metal smelting site in southern China: Chemical speciation and mobility

The investigation of chemical speciation of primary toxic metal(loid)s (Cd, Pb, and As) in soil profile in nonferrous metal smelting site is a key to the assessment of their mobility characteristics and formulation of subsequent remediation strategy. In this study, 74 soil samples were collected at 12 different soil profiles; soil physio-chemical properties and total content of Cd, Pb and As and corresponding chemical speciation were also determined. The results showed that the mean total concentration followed the order of Pb > As > Cd. A large proportion of Pb, Cd and As were accumulated in upper soil profiles (depth < 3 m). Heavy pollution of Pb, Cd and As were observed in the whole soil profile at the area of fuel oil storage tank (ZY6) and lead smelting area (ZY8). The dominant fraction of Cd was exchangeable fraction (F1); Pb was dominant in Fe/Mn oxides-bound fraction (F3) in most cases; Crystallized Fe/Al hydrous oxides bound fraction (F4) generally accounted for a large proportion of As. Mobility factor (MF) followed the order Cd > As > Pb, indicating that Cd was the most mobile element in soil profiles. Pearson correlation analysis found that MF_Cd was significantly positively correlated to soil silt; the F4 fraction percentage of As was significantly positively correlated to soil redox potential (Eh). Additionally, MF_Cd/Pb was found to be positively correlated to crystalline iron (Fe_c), while negatively correlated to amorphous iron (Fe_o). The findings reported in this study, on the basis of distribution characteristics of chemical speciation could provide a new solution for future soil remediation at the site. Long-term solutions to metal(loid)s pollution might be offered by microbial-assisted soil washing technique that promotes the transformation of Fe/Mn oxides-bound fraction and organic/sulfide-bound fraction.

Experimental study on remediation of low permeability Cu-Zn contaminated clay by vacuum enhanced leaching combined with EDTA and hydrochloric acid

To improve the washing efficiency for low permeable clay, the method of vacuum enhanced washing technology was proposed. In this study, ethylene diamine tetraacetic acid (EDTA) and hydrochloric acid (HCl) as eluents, the experiments of remediation of Cu-Zn contaminated cohesive soil by traditional soil column leaching and vacuum enhanced leaching was carried out. Results show that compared with traditional leaching method, the vacuum enhanced leaching method can significantly shorten the leaching time and prominently improve the removal rate of heavy metals Cu-Zn. When concentration of EDTA is 0.1 mol/L, the removal rate of Cu-Zn can reach 95.7% and 82.9%, respectively by vacuum-enhanced leaching. When concentration of HCl is 0.2 mol/L, the removal rate of Cu-Zn by vacuum enhanced leaching method can reach 96.2% and 90.2%, respectively. Whereas, the higher the concentration of EDTA and HCl, the slower the leaching rate. At the same concentration, the leaching rate of HCl was faster. After HCl leaching, the soil structure was seriously corroded, and the relative content of mineral composition changed considerably. After EDTA leaching, the corrosion of soil structure is light, and the relative content of mineral composition changes little. The conclusions obtained are of crucial theoretical value and technical support for environmental engineering.

Field Experiments of Phyto-Stabilization, Biochar-Stabilization, and Their Coupled Stabilization of Soil Heavy Metal Contamination around a Copper Mine Tailing Site, Inner Mongolia

A field trial was conducted in Inner Mongolia to evaluate the stabilization effects of phyto-stabilization, biochar-stabilization, and their coupled stabilization for As, Cu, Pb, and Zn in soil. Stabilization plants (Achnatherum splendens, Puccinellia chinampoensis, and Chinese small iris) and biochar (wood charcoals and chelator-modified biochar) were introduced in the field trial. The acid-extractable fraction and residual fraction of the elements were extracted following a three-stage modified procedure to assess the stabilization effect. The results after 60 days showed that the coupled stabilization produced a better stabilization effect than biochar-/phyto- stabilization alone. Achnatherum splendens and Puccinellia chinampoensis were found to activate the target elements: the residual fraction proportion of As, Cu, Pb, and Zn decreased while the acid-extractable fraction proportion of Cu and Zn increased in the corresponding planting area. Neither type of biochar produced a notable stabilization effect. The residual fraction proportion of As (20.8–84.0%, 29.2–82%), Pb (31.6–39.3%, 32.1–48.9%), and Zn (30.0–36.2%, 30.1–41.4%) increased, while the acid-extractable fraction proportion remained nearly unchanged after treatment using Chinese small iris-straw biochar or Achnatherum splendens-straw biochar, respectively. The results indicate that phyto-stabilization or biochar-stabilization alone are not suitable, whereas the coupled stabilization approach is a more efficient choice.

Efficient Inorganic/Organic Acid Leaching for the Remediation of Protogenetic Lead-Contaminated Soil

In this study, inorganic acid and organic acid were used to leach and remediate superheavy, lead-contaminated protogenetic soil with a lead pollution level of 8043 mg∙kg−1. Among the compounds studied, HCl and citric acid (CA) presented the best effects, respectively. Under the optimal experimental conditions, the remediation efficiency of 0.05 mol∙L−1 CA reached 53.6%, while that of 0.2 mol∙L−1 HCl was 70.3%. According to the lead morphology analysis, CA and HCl have certain removal ability to different fractions of lead. Among them, the removal rates of acid-soluble lead in soil by HCl and CA are 93% and 83%, and the soil mobility factor (MF) value decreased from 34.4% to 7.74 % and 12.3%, respectively, indicating that the harm of lead in soil was greatly reduced. Meanwhile, the leaching mechanisms of CA and HCl were studied. The pH values of the soil after leaching with HCl and CA were 3.88 and 6.97, respectively, showing that HCl leaching has caused serious acidification of the soil, while the process of CA leaching is more mild. CA has a relatively high remediation efficiency at such a low concentration, especially for the highly active acid-soluble fraction lead when maintaining the neutrality of the leached soil. Hence, CA is more suitable for the remediation of lead-contaminated soil.

Insights into naphthalene degradation in aqueous solution and soil slurry medium: Performance and mechanisms

The performance of naphthalene (NAP) degradation in peroxodisulfate (PDS) and peroxymonosulfate (PMS) oxidation systems by nano zero valent iron (nZVI) combined with citric acid (CA) activation was reported in aqueous solution and soil slurry medium. The results in aqueous solution tests indicated that 98.1% and 98.9% of NAP were individually degraded in PDS/nZVI/CA and PMS/nZVI/CA systems within 2 h when the dosages of PDS, PMS, nZVI and CA were 1.0 mM, 0.1 mM, 0.2 mM and 0.1 mM, respectively. The consequences of scavenging tests and electron paramagnetic resonance detection demonstrated that HO• and SO₄^-• were the key factors on NAP removal. The presence of surfactants could consume ROSs and inhibit NAP removal. In addition, GC-MS was applied for the determination of NAP degradation intermediates, and three possible NAP degradation pathways were proposed in PDS oxidation process and two pathways in PMS oxidation process, respectively. The results in soil slurry medium showed that the presence of CA could promote the dissolution of soil minerals and the desorption of NAP from soil medium. 93.5% and 96.8% degradation of NAP were obtained in PDS/nZVI/CA and PMS/nZVI/CA systems within 24 h. Besides, the existence of DOM in soil could promote Fe(II)/Fe(III) cycle and NAP degradation through electron transfer. Based on the NAP degradation performance in the actual groundwater and soil medium, the above findings could provide basis and strong support for the potential application of PDS/nZVI/CA and PMS/nZVI/CA systems in the remediation of NAP contaminated sites.

Zinc in soil-plant-human system: A data-analysis review

Zinc (Zn) plays an important role in the physiology and biochemistry of plants due to its established essentiality and toxicity for living beings at certain Zn concentration i.e., deficient or toxic over the optimum range. Being a vital cofactor of important enzymes, Zn participates in plant metabolic processes therefore, alters the biophysicochemical processes mediated by Zn-related enzymes/proteins. Excess Zn can provoke oxidative damage by enhancing the levels of reactive radicals. Hence, it is imperative to monitor Zn levels and associated biophysicochemical roles, essential or toxic, in the soil-plant interactions. This data-analysis review has critically summarized the recent literature of (i) Zn mobility/phytoavailability in soil (ii) molecular understanding of Zn phytouptake, (iii) uptake and distribution in the plants, (iv) essential roles in plants, (v) phyto-deficiency and phytotoxicity, (vi) detoxification processes to scavenge Zn phytotoxicity inside plants, and (vii) associated health hazards. The review especially compares the essential, deficient and toxic roles of Zn in biophysicochemical and detoxification processes inside the plants. To conclude, this review recommends some Zn-related research perspectives. Overall, this review reveals a thorough representation of Zn bio-geo-physicochemical interactions in soil-plant system using recent data.

Synergistic leaching of heavy metal-polycyclic aromatic hydrocarbon in co-contaminated soil by hydroxamate siderophore: Role of cation-π and chelation

Exploring a novel green efficient bioeluant is a golden key to unlock the ex-situ scale remediation of soil contaminated with heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs). Hydroxamate siderophore (HDS) produced by Pseudomonas fluorescens HMP01, with certain hydrophobicity and strong coordination because of its special chemical structure (e.g., hydroxamic acid and dihydroxy quinoline chromophore), was used to investigate the bioleaching efficiency of HMs and PAHs from actual contaminated soils and underlying mechanisms. Results showed that leaching efficiency for HMs and PAHs from the co-contaminated soil was higher than that of single contaminated soil due to the cation-π interaction and coordination, which was closely related to the spacial configuration changes of the complex. HDS not only increased the bioleaching efficiency of cationic HMs by chelation (the leaching amount of Cd²⁺, Pb²⁺, Hg²⁺, Cu²⁺, Zn²⁺, and Ni²⁺ achieved 27.5, 110.4, 6.9, 477.7, 10,606.9, and 137.4 mg/kg HDS, respectively) but also enhanced the bioleaching amount of PAHs by solubilization (the leaching amount of phenanthrene reached 90.2 mg/kg HDS. Also, the residual HDS in soils caused no significant ecological risk. As expected, HDS is a desirable bioeluant to promote the scale application of the ex-situ remediation of soil contaminated with HMs and PAHs.

Antimony Immobilization in Primary-Explosives-Contaminated Soils by Fe-Al-Based Amendments

Soils at primary explosives sites have been contaminated by high concentrations of antimony (Sb) and co-occurring heavy metals (Cu and Zn), and are largely overlooked and neglected. In this study, we investigated Sb concentrations and species and studied the effect of combined Fe- and Fe–Al-based sorbent application on the mobility of Sb and co-occurring metals. The content of Sb in soil samples varied from 26.7 to 4255.0 mg/kg. In batch experiments, FeSO₄ showed ideal Sb sorption (up to 97% sorption with 10% FeSO₄·7H₂O), whereas the sorptions of 10% Fe⁰ and 10% goethite were 72% and 41%, respectively. However, Fe-based sorbents enhanced the mobility of co-occurring Cu and Zn to varying levels, especially FeSO₄·7H₂O. Al(OH)₃ was required to prevent Cu and Zn mobilization. In this study, 5% FeSO₄·7H₂O and 4% Al(OH)₃ mixed with soil was the optimal combination to solve this problem, with Sb, Zn, and Cu stabilizations of 94.6%, 74.2%, and 82.2%, respectively. Column tests spiked with 5% FeSO₄·7H₂O, and 4% Al(OH)₃ showed significant Sb (85.85%), Zn (83.9%), and Cu (94.8%) retention. The pH-regulated results indicated that acid conditioning improved Sb retention under alkaline conditions. However, no significant difference was found between the acidification sets and those without pH regulation. The experimental results showed that 5% FeSO₄·7H₂O + 4% Al(OH)₃ without pH regulation was effective for the stabilization of Sb and co-occurring metals in primary explosive soils.

Feasibility of a combined solubilization and eluent drainage system to remove Cd and Cu from agricultural soil

Washing using low-molecular-weight organic acid is an effective and eco-friendly technique to permanently remove heavy metals from soil. There is still lack of evaluation of the application modes and the recovery methods, as well as the variations of heavy metal and nutrients fractions on a pilot-scale during washing. Here, we developed a simple combined solubilization and eluent drainage system in a pilot-scale washing box using industrial grade citric acid with feasible waste eluent treatment method to remove cadmium (Cd) and copper (Cu) from agricultural soil. The removal rates of Cd and Cu after sequential two-stage citric acid-water washing reach up 68.9% and Cu 41.4%, which was 7.5% and 10.0% higher than single citric acid. The removed the heavy metals were mainly in exchangeable and reducible fractions. The heavy metals at different soil depth were dissolved more effectively by citric acid-water washing with wheat straw as underdrain filling material than that of crushed stone. The potential risks of Cd in soils all decreased by approximately 75% from considerable to low risk. The two-stage citric acid-water washing significantly mitigated the effect of soil acidification. The average contents of soil organic matter, available ammonium N-NH₄ and available phosphorus increased by 40.9%, 57.3%, 32.0% after citric acid-water washing under wheat straw filling. The waste eluent can be efficiently recovered by clam powder, which removed 78.7% of Cd and 57.5% of Cu. The regenerated citric acid showed similar removal efficiencies for Cd and Cu compared to the fresh citric acid. These results indicate that the combination of washing, drainage and flocculation can effectively remove Cd and Cu from contaminated agricultural soil and realize the recycling of waste eluent.

Passivation of multiple heavy metals in lead-zinc tailings facilitated by straw biochar-loaded N-doped carbon aerogel nanoparticles: Mechanisms and microbial community evolution

Heavy metal (HM) soil pollution has become an increasingly serious problem with the development of industries. Application of biochar in HMs remediation from contaminated environment has attracted considerable research attention during the past decade. Although the mechanism of HMs passivation with biochar has been investigated, effects and mechanisms of interaction among soil-indigenous microbes and novel carbon matrix composites for HMs adsorption and passivation are still unclear. Four different biochar-loaded aerogels, namely, BNCA-1-600, BNCA-1-900, BNCA-2-600, and BNCA-2-900, were synthesized in this study. Adsorption capacity of four kinds of synthetic materials and two types of contrast biochars (BC600 and BC900) to HMs in aqueous solution, passivation capacity of HMs in soil, and effects on soil organic matter and microbial community were explored. Results showed that BNCA-2-900 exhibits excellent adsorption property and a maximum removal capacity of 205.07 mg·g^-1 at 25 °C for Pb(II), 105.56 mg·g^-1 for Cd(II), and 137.89 mg·g^-1 for Zn(II). Leaching concentration of HMs in contaminated soil can meet the national standard of China (GB/T 5085.3-2007) within 120 days. Results of this study confirmed that the additive BNCA-2-900 and coexistence of indigenous microorganisms can effectively reduce bioavailability of HMs. Another potential mechanism may be to remove the passivation of HMs by porous structure and surface functional groups as well as improve the content of organic matter and microbial abundance. The research results may provide a novel perceptive for the development of functional materials and strategies for eco-friendly and sustainable multiple HMs remediation in contaminated soil and water by using a combination of carbon matrix composites and soil-indigenous microorganisms.

The cadmium decontamination and disposal of the harvested cadmium accumulator Amaranthus hypochondriacus L

The heavy metal accumulated biomass after phytoremediation needs to be decontaminated before disposal. Liquid extraction is commonly used to remove and recycle toxic heavy metals from contaminated biomass. In this study, we examined the cadmium (Cd) removal efficiency using different chemical reagents (hydrochloric acid, nitric acid, sulfuric acid, and ethylenediaminetetraacetic acid disodium) of the post-harvest Amaranthus hypochondriacus L. biomass. The purifications for the extracted liquids and ecological risk assessments for the extracted residues were also investigated. We have found that 77.8% of Cd in stems and 62.1% of Cd in leaves were removed by 0.25 M HCl after 24 h. In addition, K₂CO₃, KOH, and 4 Å molecular sieve could remove ≥89.0% of Cd in the extracted liquids. Finally, after we returned the extracted residues to the earthworm-incubated soil, the extracted biomass negatively affected the growth (weight loss ≥ 11.0%) and survival (mortality ≥ 33.3%) of Eisenia fetida. It should be noted that earthworms decreased soil available Cd concentrations from 0.14-0.05 mg kg^-1 to 0.11-0.04 mg kg^-1 and offset the negative effects of the Cd-contaminated biomass on soil microbes. Overall, given the cost of reagents, the Cd removal efficiency, and the ecological risks of the extracted biomass, using 0.25 M HCl for liquid extraction and K₂CO₃ for purification should be recommended. This work highlights the potential of liquid extraction for immediately and directly removing the Cd from fresh contaminated accumulator biomass and the resource cycling potential of the extracted liquids and biomass after purification.

Functions and strategies for enhancing zinc availability in plants for sustainable agriculture

Zinc (Zn), which is regarded as a crucial micronutrient for plants, and is considered to be a vital micronutrient for plants. Zn has a significant role in the biochemistry and metabolism of plants owing to its significance and toxicity for biological systems at specific Zn concentrations, i.e., insufficient or harmful above the optimal range. It contributes to several cellular and physiological activities of plants and promotes plant growth, development, and yield. Zn is an important structural, enzymatic, and regulatory component of many proteins and enzymes. Consequently, it is essential to understand the interplay and chemistry of Zn in soil, its absorption, transport, and the response of plants to Zn deficiency, as well as to develop sustainable strategies for Zn deficiency in plants. Zn deficiency appears to be a widespread and prevalent issue in crops across the world, resulting in severe production losses that compromise nutritional quality. Considering this, enhancing Zn usage efficiency is the most effective strategy, which entails improving the architecture of the root system, absorption of Zn complexes by organic acids, and Zn uptake and translocation mechanisms in plants. Here, we provide an overview of various biotechnological techniques to improve Zn utilization efficiency and ensure the quality of crop. In light of the current status, an effort has been made to further dissect the absorption, transport, assimilation, function, deficiency, and toxicity symptoms caused by Zn in plants. As a result, we have described the potential information on diverse solutions, such as root structure alteration, the use of biostimulators, and nanomaterials, that may be used efficiently for Zn uptake, thereby assuring sustainable agriculture.

Evaluation of three common alkaline agents for immobilization of multi-metals in a field-contaminated acidic soil

We investigated three common alkaline agents (NaOH, CaO, and Mg(OH)₂) for immobilization of four heavy metals (Pb, Zn, Cu, and Cd) in a field-contaminated soil and elucidated the underpinning principles. NaOH caused the highest pH spike in the soil, while CaO and Mg(OH)₂ served as a longer-lasting source of OH^-. Amending the soil with CaO or Mg(OH)₂ at ≥0.1 mol as OH^- (kg·soil)^-1 for 24 h was able to immobilize all four metals, while NaOH failed. NaOH leached up to 3 times more organic carbon than CaO and Mg(OH)₂, resulting in elevated leachability of the metals. Column elution tests showed that amendments by CaO and Mg(OH)₂ lowered the leachable Pb²⁺, Zn²⁺, Cu²⁺, and Cd²⁺ by 52-54%, 71-75%, 69-73%, and 68%, respectively, after 1440 pore volumes of elution. Sequential extraction revealed that the soil amendments converted the exchangeable fraction of the metals to the much less available forms. XRD and FTIR analyses indicated that formation of metal oxide precipitates and complexation with soil organic matter were responsible for the metals immobilization. Taken together the chemical cost, technical effectiveness, and environmental impact, CaO is the most suitable alkaline agent for remediation of soil contaminated with heavy metals.

Remediation of zinc-contaminated soils by using the two-step washing with citric acid and water-soluble chitosan

Remediation of heavy metal contaminated soil with appropriate washing agents is crucial to the decline in the harmfulness of contaminated soil by heavy metals to the environment and human health. In this study, citric acid (CA) and water-soluble chitosan (WSCS) as natural and degradable washing agents were used to remove Zn in the soil by two-step washing method. Results indicated that the two-step washing with CA and WSCS were found to be suitable for the removal of Zn from the contaminated soils, which significantly decreased the total concentration of Zn in the soil. After the remediation process with two-step soil washing, the contents of Zn in different chemical species decreased, especially for the carbonate-bound fraction. Therefore, the two-step soil washing with CA and WSCS was advisable for the remediation of Zn-contaminated soils. The washing mechanism could include the acid dissolution, ion exchange and complexation reaction between zinc ions and functional groups such as hydroxyl, carboxyl, amine and amide groups. This study provided the theoretical support for the exploitation and application of suitable washing agents used for the remediation of contaminated soils by heavy metals.

Choline-based deep eutectic solvent combined with EDTA-2Na as novel soil washing agent for lead removal in contaminated soil

Lead-contaminated soil was cleaned through ethylene-diamine-teraacetic acid disodium salt (EDTA-2Na) combined with diluted deep eutectic solvent (DES) which was prepared by mixing choline chloride with ethylene glycol. The influences of leaching temperature, leaching time, liquid-solid (L/S) ratio, concentration of EDTA-2Na, water-DES ratio, and the molar ratio of choline chloride-ethylene glycol (Ch-E) on the leaching rate of lead were investigated. The mineral phases of the soil and DES before and after washing were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The changes to the DESs before and after dissolving lead nitrate (Pb(NO₃)₂) were analyzed by high resolution mass spectrometry (HRMS) and nuclear magnetic resonance (NMR). Hydrogen bonds and EDTA-2Na in the Ch-M system resulted in the conversion of Pb(NO₃)₂ to other complex ions such as [Pb·Ch-E]^- and [Pb·EDTA-2Na]^- and other complex ions due to the dissolution of the washing agent. The results showed that the soil mineral phase did not change significantly and up to 95.79% of Pb could be washed under temperature, time, L/S ratio, EDTA-2Na concentration, DES/water ratio, Ch-E molar ratio, and stirring speed conditions of 40 °C, 2 h, 6, 0.02 M, 2, 0.75 and 300 rpm, respectively. The hydrogen bonds and EDTA-2Na may play a key role in the remediation of lead-contaminated soil by a washing agent. This research describes a rapid, efficient, and environmentally friendly method for remediation of lead-contaminated soil.

Kinetics of Cu, Pb and Zn removal during soil flushing with washing agents derived from sewage sludge

This paper presents the first tests of Cu (7875 mg/kg), Pb (1414 mg/kg) and Zn (566 mg/kg) removal from contaminated soil with sewage-sludge-derived washing agents (SS_WAs) (dissolved organic matter, DOM; soluble humic-like substances, HLS; soluble humic substances, SHS) and Na₂EDTA (as a standard benchmark) in column experiments. Flow rates of 0.5 ml/min and 1 ml/min were used. Using a 1. order kinetic model, the kinetic constant (k), the maximum concentrations of each metal removed (C_max), and the initial rates of metal removal (r) were established. At both flow rates, stable flow velocity was maintained for approximately eight pore volumes, for flushing times of 8 h (1.0 ml/min) and 16 h (0.5 ml/min). Although the flow rate did not influence k, it influenced C_max: at 1 ml/min, C_max values were higher than at 0.5 ml/min. For Cu and Zn, but not Pb, k was about twofold higher with Na₂EDTA than with SS_WAs. Although Na₂EDTA gave the highest k_Cu, C_max,Cu was highest with DOM (Na₂EDTA, 66%; DOM 73%). For Pb removal, HLS was the most effective SS_WA (77%; Na₂EDTA was 80% effective). k_Zn was about twofold higher with Na₂EDTA than with SS_WAs. C_max,Zn was highest with HLS. The quick mobilization of Cu, Pb and Zn with most of the WAs corresponded to efficient metal removal from the exchangeable (F1) fraction.

Remediation of artificially contaminated soil and groundwater with copper using hydroxyapatite/calcium silicate hydrate recovered from phosphorus-rich wastewater

Excessive copper (Cu) in contaminated soil and groundwater has attracted continuous attentions due to the bioaccumulation and durability. In this study, the feasibility of remediation of heavy metal pollution in soil and groundwater was investigated using hydroxyapatite/calcium silicate hydrate (HAP/C-S-H) recovered from phosphorus-rich wastewater in farmland. The results show that the pH has a strong effect on copper removal from Cu-contaminated groundwater but the impact of ion strength on the removal is weak. In general, high pH and low ion strength give better results in copper removal. Kinetic and isotherm data from the study fit well with Pseudo-second-order kinetic model and Langmuir isotherm model, respectively. The maximum adsorption capacity of HAP/C-S-H (138 mg/g) was higher than that of C-S-H (90.3 mg/g) when pH value, temperature, and ionic strength were 5, 308 K, and 0.01 M, respectively. Thermodynamics results indicate that Cu removal is a spontaneous and endothermic process. X-ray diffraction (XRD) results show that the mechanism of copper removal involves physical adsorption, chemical precipitation and ion exchange. For the remediation of Cu-contaminated soil, 76.3% of leachable copper was immobilized by HAP/C-S-H after 28 d. Acid soluble Cu, the main contributor to biotoxicity, decreased significantly while reducible and residual Cu increased. After immobilization, the acid neutralization capacity of the soil increased and the dissolution of copper was substantially reduced in near-neutral pH. It can be concluded that HAP/C-S-H is an effective, low-cost and eco-friendly reagent for in-situ remediation of heavy metal polluted soil and groundwater.

Removal of Cu and Pb from contaminated agricultural soil using mixed chelators of fulvic acid potassium and citric acid

This study investigated the application of a specific soil washing method to remove Cu and Pb from contaminated agricultural soil. To develop an efficient leaching agent of heavy metal compounds for use in farmland soil, a mixed chelator (MC) was prepared using potassium fulvic acid (PFA, 3.2%) and citric acid (CIT, 0.16 M) in a volume ratio of 4:1 (PFA:CIT = 4:1); the optimal solid-liquid ratio (S/L = 1:20), initial pH value (4.51) and contact time (360 min) were also explored. Under optimal conditions, the removal efficiencies of MC for Cu and Pb were 42.92% and 50.46%, respectively, both of which performed better than PFA (27.86% of Cu and 17.91% of Pb) and CIT (42.04% of Cu and 41.46% of Pb). The effective states, bioavailability and relative mobilities of Cu and Pb in soil were also efficiently reduced by MC, which also increased the stability of these elements, thereby lowering the risk to soil health. More importantly, MC not only had little effect on the soil physicochemical properties (e.g., pH, organic matter (OM), cation exchange capacity (CEC), ammonium nitrogen (AN), available phosphorus (AP) and rapidly available potassium (AK)), but also improved the restored soil. Furthermore, soil structure, surface elements and the enzyme activity did not exhibit significantly loss. Therefore, MC has great potential for remediating agricultural soil.

Remediation of iron oxide bound Pb and Pb-contaminated soils using a combination of acid washing agents and l-ascorbic acid

Soil washing is an efficient, rapid, and cost-effective remediation technique to dissolve target pollutants from contaminated soil. Here we studied the effects of leaching agents: hydrochloric acid (HCl), ethylenediamine tetraacetic acid disodium salt (Na₂EDTA) and citric acid (CA), and reductants: hydroxylamine hydrochloride (NH₂OH·HCl) and l-ascorbic acid (VC) on the leaching of Pb from synthetic iron oxide; the changes in mineralogy, morphology, and occurrence of Pb were shown by XRD, SEM, and sequential extraction analyses. Although the washing efficiency of Pb follows the trend HCl (44.24%) > Na₂EDTA (39.04%) > CA (28.85%), the cooperation of the leaching agent with reductant further improves the efficiency. VC is more suitable as a reductant considering the higher washing efficiency by HCl-VC (98.6%) than HCl-NH₂OH·HCl (88.8%). Moreover, increasing the temperature can promote the decomposition and dehydrogenation reaction of VC with more H⁺. Among the mixture agents, Na₂EDTA + VC is the most effective agent to remediate the two kinds of contaminated soils owing to the formation of Fe(ii)-EDTA, a powerful reducing agent so that the efficiencies can reach up to 98.03% and 92.81%, respectively. As a result, these mixture agents have a great prospect to remediate Pb-contaminated soils.