The effects of functional groups on the sorption of naphthalene on microplastics

Affected interactions and co-transport of cadmium sulfide quantum dots with Pb2+ by surface functionalization

Quantum dots (QDs), emerging semiconductor nanomaterials, have been detected in various environmental media and can adsorb co-existing contaminants (e.g., Pb2+). Surface modifications aimed at enhancing the performance of QDs can significantly affect their physicochemical properties, but their effects on QDs environmental behavior remain unclear. Herein, we investigated the adsorption and co-transport behaviors of aminated (NQD), hydroxylated (OQD), and carboxylated cadmium sulfide QDs (CQD) with Pb2+ via batch adsorption and quartz sand column experiments. The influence of ionic strength (IS) and cation valence on the co-transport of QDs and Pb2+ was examined. Our experimental findings revealed that Pb2+ inhibited the mobility of OQD and CQD but enhanced the transport of NQD due to the surface complexation and cation bridging effects. This promoting effect was weakened with increasing IS and cation valence, indicating the involvement of non-Derjaguin-Landau-Verwey-Overbeek forces. Furthermore, OQD and CQD with high mobility and strong affinity to Pb2+ effectively promoted the transport of Pb2+, with CQD exhibiting a more pronounced effect than OQD. Conversely, NQD reduced Pb2+ efflux due to their lower mobility and stronger adsorption to Pb2+. These results provide valuable insights into the role of surface modifications on QDs and their interactions with co-existing contaminants in subsurface environments.

Correcting microplastic pollution and risk assessment in Chinese watersheds

Microplastics (MPs) are emerging pollutants that are attracting attention because of their potential threats posed and their widespread presence in the environment. MP pollution in Chinese watersheds requires assessment; however, existing risk models face data-scale biases. By compiling 2,474 samples from 165 articles, we constructed a national dataset on MPs and propose a novel framework that integrates rescaled MP concentrations with MP characteristics to recalibrate MP pollution and ecological risks. The results showed that MP concentrations show substantial variability across seven orders of magnitude, and corrected data offered a more accurate representation of environmental concentrations. MP shapes, polymers, and colors differed among river basins, and population density and precipitation were important drivers of variations in MP concentrations. MP shapes, colors, and sizes that were not previously considered are now included in the risk assessment of MPs. Furthermore, 50 % of the sampling sites were in the dangerous and extremely dangerous ecological risk classes. The concentrations measured at 16.98 % of the sampling sites exceeded the risk threshold, therefore posing ecological and toxicological risks. The assessment framework may provide overall insights into the differences in MP pollution in river basins.

High-performance amino-crosslinked phosphorylated microcrystalline cellulose/MoS2 hybrid aerogel for polystyrene nanoplastics removal from aqueous environments

Currently, the development of high-performance adsorbents for the removal of nanoplastics in complex aquatic environments is challenging. In this study, a functionalized polyethyleneimine-phosphorylated microcrystalline cellulose/MoS2 (PEI-PMCC/MoS2) hybrid aerogel was prepared and applied to remove carboxyl-modified polystyrene (PS-COOH) nanoplastics from the aqueous solution. Benefiting from the introduced functional groups and the expanded lamellar structure in MoS2 nanosheets as well as the highly porous 3D structure of the aerogel, PEI-PMCC/MoS2 demonstrated high efficiency in PS-COOH nanoplastics removal, achieving a 402.4 ± 7.5 mg/g maximum adsorption capacity at the optimal adsorption pH of 7.0 (C0 = 300 mg/L). The adsorption isotherm and kinetics data fitted well with the Langmuir and pseudo-second-order models, respectively, suggesting that the removal of PS-COOH nanoplastics was dominated by the monolayer chemisorption process, and the thermodynamic studies revealed the exothermic nature of the spontaneous adsorption process. Furthermore, the adsorption performance of PEI-PMCC/MoS2 in different complex aqueous environments, as well as its reusability, was evaluated, and the interactions between PEI-PMCC/MoS2 and PS-COOH nanoplastics were analyzed to elaborate the adsorption mechanism. These results confirmed the high nanoplastics removal efficiency and favorable reusability in PEI-PMCC/MoS2, laying a solid foundation for developing high-performance adsorbents for nanoplastics removal.

Innovative materials that behave like robots to combat plastic pollution

The growing plastic pollution crisis demands novel approaches, with innovative materials that mimic robotic behaviors emerging as a promising solution. This approach explores the development and application of smart materials that can autonomously engage in plastic waste removal, functioning like robots under various environmental conditions. We focus on materials activated by light, magnetic fields, chemical fuels, and ion exchange, which are designed to target and remove plastic waste efficiently. The key properties of these materials, such as self-activation, adaptability, and precision that enable them to function autonomously in waste management systems, are examined. The integration of these innovative materials offers significant advantages, including faster waste processing, reduced human exposure to hazardous waste, and enhanced sorting accuracy. Additionally, this review evaluates the environmental impact, scalability, and cost-effectiveness of these materials in comparison to traditional methods. Finally, the potential of these materials to play a central role in sustainable plastic waste management and contribute to a circular economy is discussed.

Adsorption mechanism of cefradine on three microplastics: A combined molecular dynamics simulation and density functional theory calculation study

Microplastics and antibiotics are receiving increasing attention as two emerging pollutants in the aquatic ecosystem. The absorption of antibiotics by microplastics can potentially intensify their impact on marine organisms and human health. However, the detailed mechanisms underlying this interaction remain to be elucidated. Through molecular dynamics (MD) simulations and density functional theory (DFT) calculations, this study investigated the adsorption of cefradine (CED) onto three typical microplastics (MPs)-polyethylene (PE), polypropylene (PP), and polyamide (PA). The results of the molecular dynamics simulations showed that the interaction energy between CED and microplastics followed the order of PA-CED > PP-CED > PE-CED, indicating that PA microplastics had the highest adsorption capacity for CED antibiotics. The total energy contribution of the microplastics-cefradine (MPs-CED) systems suggested that the van der Waals and electrostatic interactions were the two primary mechanisms for the adsorption of CED by these three microplastics. In DFT calculations, the adsorption of CED on PA was found to be significantly influenced by both electrostatic and van der Waals effects, while the main driving force in the adsorption of PE and PP is van der Waals effect. In addition, IGMH analysis and AIM topological analysis confirmed that the adsorption of CED on PA relied heavily on the synergistic effect of hydrogen bonding and the van der Waals effect. The findings of this study validate the results obtained from molecular dynamics simulations, laying a foundation for a comprehensive exploration of the interaction mechanisms between microplastics and organic pollutants by integrating MD simulations and DFT calculations.

Polycyclic aromatic hydrocarbon derivatives onto polar microplastics of polyurethane: equilibrium, thermodynamics, and kinetics of monolayer-multilayer adsorption

The study of the adsorption of polycyclic aromatic hydrocarbons on microplastics (MPs) has attracted much attention as to how microplastics can act as carriers of these pollutants. Polyurethane (PU) is one of the MPs found in aquatic environments, containing different functional groups it can interact with polar and nonpolar molecules. PAH derivatives (dPAHs) present different properties and thus can be adsorbed by different interactions; thus, this study investigated the adsorption of fluorene (FLN), dibenzothiophene (DBT), dibenzofuran (DBF), and carbazole (CBZ) onto PU MP. The Langmuir, Freundlich, and BET isotherm models were examined, and the BET model best fitted. The adsorption was a nonspontaneous process, exothermic for mono- and multilayer formation for FLN, DBT, and CBZ, and endothermic for DBF monolayer formation. The adsorption monolayer was formed by van der Waals forces, H─bonding, and π─π interactions, while the formation of the multilayer can be explained by π─π and hydrophobic interactions. The pseudo-second-order model proved to be more consistent for the adsorption of dPAHs. The adsorption in artificial seawater shows no significant differences for the monolayer but favored the adsorption multilayer due to the salting-out effect. Due to the existence of several adsorption mechanisms, PU MP interacts with dPAHs in greater quantities when compared to a MP with a simpler structure.

Microplastics and Co-pollutants in soil and marine environments: Sorption and desorption dynamics in unveiling invisible danger and key to ecotoxicological risk assessment

Microplastics (MPs) and their co-pollutants pose significant threats to soil and marine environments, necessitating understanding of their colonization processes to combat the plastic pandemic and protect ecosystems. MPs can act as invisible carriers, concentrating and transporting pollutants, leading to a more widespread and potentially toxic impact than the presence of either MPs or the pollutants alone. Analyzing the sorption and desorption dynamics of MPs is crucial for understanding pollutants amplification and predicting the fate and transport of pollutants in soil and marine environments. This review provides an in-depth analysis of the sorption and desorption dynamics of MPs, highlighting the importance of considering these dynamics in ecotoxicological risk assessment of MPs pollution. The review identifies limitations of current frameworks that neglect these interactions and proposes incorporating sorption and desorption data into robust frameworks to improve the ability to predict ecological risks posed by MPs and co-pollutants in soil and marine environments. However, failure to address the interplay between sorption and desorption can result in underestimation of the true impact of MPs and co-pollutants, affecting livelihoods and agro-employments, and exacerbate poverty and community disputes (SDGs 1, 2, 3, 8, 9, and 16). It can also affect food production and security (SDG 2), life below water and life on land (DSGs 14 and 15), cultural practices, and natural heritage (SDG 11.4). Hence, it is necessary to develop new approaches to ecotoxicological risk assessment that consider sorption and desorption processes in the interactions between the components in the framework to address the identified limitations.

Hydrophilic Fraction of Dissolved Organic Matter Largely Facilitated Microplastics Photoaging: Insights from Redox Properties and Reactive Oxygen Species

Dissolved organic matter (DOM) exists widely in natural water, which inevitably influences microplastic (MP) photoaging. Nevertheless, the impacts of DOM fractions with diverse molecular structures on MP photoaging remain to be elucidated. This study explored the photoaging mechanisms of polylactic acid (PLA)-MPs and polystyrene (PS)-MPs in the presence of DOM and its subfractions (hydrophobic acid (HPOA), hydrophobic neutral (HPON), and hydrophilic (HPI)). Across DOM fractions, HPI exhibited the highest electron accepting capacity (23 μmol e- (mg C)-1) due to its abundant tannin-like species (36.8%) with carboxylic groups, which facilitated more reactive oxygen species generation (particularly hydroxyl radical), leading to the strongest photoaging rate of two MPs by HPI. However, the sequences of bond cleavage during photoaging of each MPs were not clearly shifted as revealed by two-dimensional infrared correlation spectra. Inconspicuous effects on the extent of PS- and PLA-MPs photoaging were observed for HPOA and HPON, respectively. This was mainly ascribed to the occurrence of inhibitory mechanisms (e.g., light-shielding and quenching effect) counteracting the reactive oxygen species-promoting effects. The findings identified the HPI fraction of DOM for promoting PS- and PLA-MPs photoaging rate and first constructed a link among DOM molecular structures, redox properties, and effects on MP photoaging.

Cotransport of nanoplastics and plastic additive bisphenol AF (BPAF) in unsaturated hyporheic zone: Coupling effects of surface functionalization and protein corona

The ecological risk of combined pollution from microplastics (MPs) and associated contaminants usually depends on their interactions and environmental behavior, which was also disturbed by varying surface modifications of MPs. In this study, the significance of surface functionalization and protein-corona on the cotransport of nanoplastics (NPs; 100 nm) and the related additive bisphenol AF (BPAF) was examined in simulated unsaturated hyporheic zone (quartz sand; 250-425 μm). The electronegative bovine serum albumin (BSA) and electropositive trypsin were chosen as representative proteins, while pristine (PNPs), amino-modified (ANPs), and carboxyl-modified NPs (CNPs) were representative NPs with different charges. The presence of BPAF inhibited the mobility of PNPs/CNPs, but enhanced the release of ANPs in hyporheic zone, which was mainly related to their hydrophobicity changes and electrostatic interactions. Meanwhile, the NPs with high mobility and strong affinity to BPAF became effective carriers, promoting the cotransport of BPAF by 16.4 %-26.4 %. The formation of protein-coronas altered the mobility of NPs alone and their cotransport with BPAF, exhibiting a coupling effect with functional groups. BSA-corona promoted the transport of PNPs/CNPs, but this promoting effect was weakened by the presence of BPAF via increasing particle aggregation and hydrophobicity. Inversely, trypsin-corona aggravated the deposition of PNPs/CNPs, but competition deposition sites and increased energy barrier caused by coexisting BPAF reversed this effect, facilitating the cotransport of trypsin-PNPs/CNPs in hyporheic zone. However, BPAF and protein-coronas synergistically promoted the mobility of ANPs, owing to competition deposition sites and decreased electrostatic attraction. Although all of the NPs with two protein-coronas reduced dissolved BPAF in the effluents via providing deposition sites, the cotransport of total BPAF was improved by the NPs with high mobility (BSA-PNPs/CNPs) or high affinity to BPAF (BSA/trypsin-ANPs). However, the trypsin-PNPs/CNPs inhibited the transport of BPAF due to their weak mobility and adsorption with BPAF. The results provide new insights into the role of varying surface modifications on NPs in the vertical cotransport of NPs and associated contaminants in unsaturated hyporheic zone.

Effects of microplastics on carbon release and microbial community in mangrove soil systems

Mangrove ecosystems are major carbon sink biomes and also a sink of microplastics (MPs). The final enrichment of MPs in sediments may have a significant impact on the microbial community and carbon turnover in the soil. However, the effects of MP pollution on the mangrove soil microbial communities and carbon release remain unknown. Here, we conducted a manipulative incubation experiment by adding MPs to soil at different soil depths to examine the effect of enriched MPs on soil microorganisms and its function (i.e., decomposition of soil carbon). The results showed that the addition of MPs had no significant effect on the microbial diversity and CO2 cumulative emission in the topsoil but significantly increased CO2 release from the subsoil. The promoting effect of polylactide (PLA) on the release of CO2 from the subsoil was stronger than that of polyethylene (PE) and aging PE. In the subsoil, the activity of soil extracellular enzymes related to N acquisition increased with the MP addition, indicating an increase in microbial N deficiency. The subsoil was more sensitive to MPs because of the exacerbated nitrogen limitation. MP addition reduced the microbial diversity of the subsoil and altered soil microbial interactions. The increasing abundance of some microbial taxa, especially bacteria related to the sulfur cycle, indicated more active electron transfer and organic carbon mineralization in the subsoil. Our findings suggest that MP contamination has potential effects on microbial communities, nutrient cycling, and carbon release in mangrove soils that vary depending on soil depth.

An Atomic-Level Perspective on the interactions between Organic Pollutants and PET particles: A Comprehensive Computational Investigation

Microplastics (MPs) have recently attracted a lot of attention worldwide due to their abundance and potentially harmful effects on the environment and on human health. One of the factors of concern is their ability to adsorb and disperse other harmful organic pollutants in the environment. To properly assess the adsorption capacity of MP for organic pollutants in different environments, it is pivotal to understand the mechanisms of their interactions in detail at the atomic level. In this work, we studied interactions between polyethylene terephthalate (PET) MP and small organic pollutants containing different functional groups within the framework of density functional theory (DFT). Our computational outcomes show that organic pollutants mainly bind to the surface of a PET model via weak non-bonding interactions, mostly hydrogen bonds. The binding strength between pollutant molecules and PET particles strongly depends on the adsorption site while we have found that the particle size is of lesser importance. Specifically, carboxylic sites are able to form strong hydrogen bonds with pollutants containing hydrogen bond donor or acceptor groups. On the other hand, it is found that in such kind of systems π-π interactions play a minor role in adsorption on PET particles.

The comparative effects of visible light and UV-A radiation on the combined toxicity of P25 TiO2 nanoparticles and polystyrene microplastics on Chlorella sp

The ubiquitous presence of TiO2 nanoparticles (nTiO2) and microplastics (MPs) in marine ecosystems has raised serious concerns about their combined impact on marine biota. This study investigated the combined toxic effect of nTiO2 (1 mg/L) and NH2 and COOH surface functionalized polystyrene MPs (PSMPs) (2.5 and 10 mg/L) on Chlorella sp. All the experiments were carried out under both visible light and UV-A radiation conditions to elucidate the impact of light on the combined toxicity of these pollutants. Growth inhibition results indicated that pristine nTiO2 exhibited a more toxic effect (38%) under UV-A radiation when compared to visible light conditions (27%). However, no significant change in the growth inhibitory effects of pristine PSMPs was observed between visible light and UVA radiation conditions. The combined pollutants (nTiO2 + 10 mg/L PSMPs) under UV-A radiation exhibited more growth inhibition (nTiO2 + NH2 PSMPs 66%; nTiO2 + COOH PSMPs 50%) than under visible light conditions (nTiO2 + NH2 PSMPs 55%; TiO2 + COOH PSMPs 44%). Independent action modeling indicated that the mixture of nTiO2 with PSMPs (10 mg/L) exhibited an additive effect on the algal growth inhibition under both the light conditions. The photoactive nTiO2 promoted increased production of reactive oxygen species under UV-A exposure, resulting in cellular damage, lipid peroxidation, and impaired photosynthesis. The effects were more pronounced in case of the mixtures where PSMPs added to the oxidative stress. The toxic effects of the binary mixtures of nTiO2 and PSMPs were further confirmed through the field emission electron microscopy, revealing specific morphological abnormalities. This study provides valuable insights into the potential risks associated with the combination of nTiO2 and MPs in marine environments, considering the influence of environmentally relevant light conditions and the test medium.

Targeted degradation of naphthalene by peroxymonosulfate activation using molecularly imprinted biochar

Polycyclic aromatic hydrocarbons (PAHs) in aquatic environments are threatening ecosystems and human health. In this work, an effective and environmentally friendly catalyst based on biochar and molecular imprinting technology (MIT) was developed for the targeted degradation of PAHs by activating peroxymonosulfate. The results show that the adsorption amount of naphthalene (NAP) by molecularly imprinted biochar (MIP@BC) can reach 82% of the equilibrium adsorption capacity within 5 min, and it had well targeted adsorption for NAP in the solution mixture of NAP, QL and SMX. According to the comparison between the removal rates of NAP and QL by MIP@BC/PMS or BC/PMS system in respective pure solutions or mixed solutions, the MIP@BC/PMS system can better resist the interference of competing pollutants (i.e., QL) compared to the BC/PMS system; that is, MIP@BC had a good ability to selectively degrade NAP. Besides, the removal rate of NAP by MIP@BC/PMS gradually decreased as pH increased. The addition of Cl- greatly promoted the targeted removal of NAP in the MIP@BC/PMS system, while HCO3- and CO32- both had an inhibitory effect. Furthermore, SO4•-, O2•- and 1O2 produced by BC activating PMS dominated the NAP degradation, and it was inferred that the vacated imprinted cavities after NAP degradation can continue to selectively adsorb NAP and this could facilitate the reusability of the material. This study can promote the research on the targeted degradation of PAHs through the synergism of biochar/PMS advanced oxidation processes and MIT.

Interaction of fluorene and its analogs with high-density polyethylene microplastics: An assessment of the adsorption mechanism to establish the effects of heteroatoms in the molecule

The threat of microplastics (MP) pollution in aquatic ecosystems can be even more severe for they are able to interact with organic pollutants that can migrate to adjacent environments. The presence of heteroatoms in organic pollutants can directly influence adsorption onto MP. This research evaluated the adsorption of fluorene (FLN) and its heteroatom analogs dibenzothiophene (DBT), dibenzofuran (DBF) and carbazole (CBZ) onto high-density polyethylene (HDPE) MP from residual (HDPEres) and commercial (HDPEcom) sources. The Langmuir isotherm showed a better fit, while DBT showed higher maximum adsorption capacity (19.2 and 15.8 μmol g-1) followed by FLN (13.4 and 11.7 μmol g-1), and DBF (13.5 and 10.3 μmol g-1) to the HDPEcom and HDPEres, respectively, which indicates a direct correlation with the hydrophobicity of the molecules determined by Log Kow. In contrast, CBZ showed no significant interaction with MP, due to their polar characteristic, thus, no kinetic and thermodynamic parameters could be determined. The adsorption process of all PAH was determined to be exothermic and spontaneous, with low temperatures favoring the process. The pseudo-second-order kinetic models have fitted to the adsorption onto both HDPE; intraparticle diffusion was also observed. Computational studies, physical characterization techniques and batch adsorption experiments demonstrated that the mechanism is governed by hydrophobic interactions, with van der Waals forces as a secondary effect in the adsorption of FLN, DBT and DBF onto HDPEres and HDPEcom. Thus, allowing a deeper understanding of the interactions between HDPE MP and FLN as well with its derivatives.

Comparing the adsorption of methyl orange and malachite green on similar yet distinct polyamide microplastics: Uncovering hydrogen bond interactions

Microplastics (MPs) and dye pollutants are widespread in aquatic environments. Here, the adsorption characteristics of anionic dye methyl orange (MO) and cationic dye malachite green (MG) on polyamide 6 (PA6) and polyamide 66 (PA66) MPs were investigated, including kinetics, isotherm equilibrium and thermodynamics. The co-adsorption of MO and MG under different pH was also evaluated. The results reveal that the adsorption process of MO and MG is suitably expounded by a pseudo-second-order kinetic model. The process can be characterized by two stages: internal diffusion and external diffusion. The isothermal adsorption equilibrium of MO and MG can be effectively described using the Langmuir model, signifying monolayer adsorption. Furthermore, the thermodynamic results indicated that the adsorption was spontaneous with exothermic and endothermic properties, respectively. The results of binary systems reveal that MO dominates the adsorption at low pH (2-5), while MG dominates at high pH (8-10). Strong competitive adsorption was observed between MO and MG in neutral conditions (pH 6-8). The desorption experiments confirm that PA6 and PA66 could serve as potential carriers of MO and MG. The interaction between dyes and polyamide MPs is primarily mediated through hydrogen bonds and electrostatic attraction. The results reveal that PA6 formed more hydrogen bonds with the dyes, resulting in higher adsorption capacity than that of PA66. This difference can be attributed to the disparities in the synthesis process and polymerization method. Our study uncovered the adsorption mechanism of dye pollutants on PA6 and PA66, and provided a more comprehensive theoretical basis for the risk assessment concerning different types of polyamide MPs in aquatic environments.

Interaction between microplastics and humic acid and its effect on their properties as revealed by molecular dynamics simulations

The characteristics and fates of microplastics (MPs) and humic acid (HA) in the environment are significantly influenced by their interactions. Thus, the influence of the MP-HA interaction on their dynamic characteristics was explored. Upon MP-HA interaction, the number of hydrogen bonds established in the HA domains decreased significantly, and the water molecules bridging the hydrogen bonds shifted to the exterior regions of the MP-HA aggregates. The distribution intensity of Ca²⁺ located at ∼0.21 nm around HA deceased, indicating that the coordination of Ca²⁺ with the carboxyl on HA was impaired in the presence of MPs. Additionally, the Ca²⁺-HA electrostatic interaction was suppressed because of the steric hindrance of the MPs. However, the MP-HA interaction improved the distribution of water molecules and metal cations around the MPs. The diffusion coefficient of HA decreased from 0.34 × 10^-5 cm²/s to 0.20-0.28 × 10^-5 cm²/s in the presence of MPs, implying that the diffusion of HA was retarded. The diffusion coefficients of polyethylene and polystyrene increased from 0.29 × 10^-5 cm²/s and 0.18 × 10^-5 cm²/s to 0.32 × 10^-5 cm²/s and 0.22 × 10^-5 cm²/s, respectively, indicating that the interaction with HA accelerated the migration of polyethylene and polystyrene. These findings highlight the potential environmental hazards posed by MPs in aquatic environments.

Molecular level insight into the different interaction intensity between microplastics and aromatic hydrocarbon in pure water and seawater

The interaction of MPs and aromatic hydrocarbons in seawater and pure water was examined using experimental measurements, molecular dynamics (MD) simulations, and density functional theory (DFT) calculations in light of the potential health risks posed by microplastic (MPs)-associated aromatic hydrocarbon pollutants. Isothermal studies and MD simulations suggested that MPs have a stronger affinity for aromatic hydrocarbons in seawater. To uncover the mechanism, MPs' surface characteristics and their intermolecular interactions with aromatic hydrocarbons were examined. According to the research, MPs in seawater have less compact structure, bigger pores, and a higher specific surface area, all of which contribute to more sorption sites. Analysis of the intermolecular interaction indicated that MPs have a greater ability for molecular interactions in seawater and the interaction energy between MPs and aromatic hydrocarbons in seawater is higher. Additionally, seawater cations may act as bridges, which also accelerate sorption in seawater. In summary, this study provides a molecular-level understanding of MPs-aromatic hydrocarbons interaction and demonstrates that the interaction is stronger in seawater.

Recent developments in microplastic contaminated water treatment: Progress and prospects of carbon-based two-dimensional materials for membranes separation

Micro (nano)plastics pollution is a noxious menace not only for mankind but also for marine life, as removing microplastics (MPs) is challenging due to their physiochemical properties, composition, and response toward salinity and pH. This review provides a detailed assessment of the MPs pollution in different water types, environmental implications, and corresponding treatment strategies. With the advancement in nanotechnology, mitigation strategies for aqueous pollution are seen, especially due to the fabrication of nanosheets/membranes mostly utilized as a filtration process. Two-dimensional (2D) materials are increasingly used for membranes due to their diverse structure, affinity, cost-effectiveness, and, most importantly, removal efficiency. The popular 2D materials used for membrane-based organic and inorganic pollutants from water mainly include graphene and MXenes however their effectiveness for MPs removal is still in its infancy. Albeit, the available literature asserts a 70- 99% success rate in micro/nano plastics removal achieved through membranes fabricated via graphene oxide (GO), reduced graphene oxide (rGO) and MXene membranes. This review examined existing membrane separation strategies for MPs removal, focusing on the structural properties of 2D materials, composite, and how they adsorb pollutants and underlying physicochemical mechanisms. Since MPs and other contaminants commonly coexist in the natural environment, a brief examination of the response of 2D membranes to MPs removal was also conducted. In addition, the influencing factors regulate MPs removal performance of membranes by impacting their two main operating routes (filtration and adsorption). Finally, significant limitations, research gaps, and future prospects of 2D material-based membranes for effectively removing MPs are also proposed. The conclusion is that the success of 2D material is strongly linked to the types, size of MPs, and characteristics of aqueous media. Future perspectives talk about the problems that need to be solved to get 2D material-based membranes out of the lab and onto the market.

Adsorption of naphthalene and its derivatives onto high-density polyethylene microplastic: Computational, isotherm, thermodynamic, and kinetic study

Microplastics (MP) have received great attention due to the mass-produced residues discharged into the environment. MP are ideal for adhering to organic pollutants that can be easily dispersed, thus posing risks to human health. Furthermore, little has been reported on how different functional groups in polycyclic aromatic hydrocarbons (PAH) derivatives influence the adsorption behavior on MP. To better understand this process, groups methyl (-CH₃) and hydroxyl (-OH) were selected and commercial and waste high-density polyethylene (HDPE, ≤ 1 mm) were used as adsorbents, and Naphthalene (Nap), 1-Methyl-Naphthalene (Me-Nap) and α-Naphthol as adsorbates. The results showed different behaviors for nonpolar and polar adsorbates. Dispersion forces were the main type of interaction between HDPE and Nap/Me-Nap, while dipole-induced dipole forces and H-bonding were the chief interactions involving MP and polar compounds. Regardless the HDPE source, Nap and Me-Nap have a Type III isotherm, and α-Naphthol presents a Type II isotherm. Nap and Me-Nap fitted to Freundlich isotherm of an unfavorable process (n = 2.12 and 1.11; 1.87 and 1.31, respectively), with positive values of ΔH° (50 and 77.17; 66 and 64.63 kJ mol^-1) and ΔS° (0.070 and 0.0145; 0.122 and 0.103 kJ mol^-1) for commercial and waste MP, respectively. Besides, the adsorption isotherm of α-Naphthol on commercial and waste HDPE fitted to the Langmuir model (Q_max = 42.5 and 27.2 μmol g^-1, respectively), presenting negative values of ΔH° (-43.71 and -44.10 kJ mol^-1) and ΔS° (-0.037 and -0.025 kJ mol^-1). The adsorption kinetic study presents a nonlinear pseudo-second-order model for all cases. The K₂ values follow the order Me-Nap > Nap > α-Naphthol in both MP. Therefore, this experimental study provides new insights into the affinity of PAH derivatives for a specific class of MP, helping to understand the environmental fate of residual MP and organic pollutants.

Digestion of plastics using in vitro human gastrointestinal tract and their potential to adsorb emerging organic pollutants

Excessive plastic use has inevitably led to its consumption by organisms, including humans. It is estimated that humans consume 20 kg of plastic during their lifetime. The presence of microplastics in the human body can carry serious health risks, such as biological reactions e.g. inflammation, genotoxicity, oxidative stress, apoptosis, as well toxic compounds leaching of unbound chemicals/monomers, free radicals or adsorbed organic pollutants, which mainly depend on the properties of the ingested plastic. Plastics are exposed to different substances (e.g., enzymes and acids) in the digestive system, which potentially affects their properties and structure. By stimulating the human digestive system and applying a set of advanced analytical tools, we showed that the surface of polystyrene and high-density polyethylene plastics frequently in contact with food undergoes fundamental changes during digestion. This results in the appearance of additional functional groups, and consequent increase in the plastic adsorption capacity for hydrophobic ionic compounds (such as triclosan and diclofenac) while reducing its adsorption capacity for hydrophobic non-ionic compounds (such as phenanthrene). Micro- and nanostructures that formed on the flat surface of the plastics after digestion were identified using scanning electron microscopy. These structures became defragmented and detached due to mechanical action, increasing micro- and nanoplastics in the environment. Due to their size, the release of plastic nanostructures after digestion can become an "accidental food source" for a wider group of aquatic organisms and ultimately for humans as the last link in the food chain. This, combined with improved adsorption capacity of digested plastics to hydrophobic ionic pollutants, can pose a serious threat to the environment including human health and safety.

Microplastics and associated organic pollutants in beach sediments from the Gulf of Guinea (SE Atlantic) coastal ecosystems

Microplastics (MPs) are emerging pollutants of global concern due to their pervasiveness, sorptive capacity for organic and inorganic pollutants, and direct and indirect toxicity to organisms and ecosystems. This study aimed to assess the concentration and the statistical difference in the concentration of microplastic-sorbed organic pollutants from two ecosystems, the marine and estuarine lagoon. Surface sediment from the estuarine lagoon and marine ecosystems were sampled for microplastics (1-5 mm). A total of 3680 MP particles were collected. The plastics were analyzed for polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). ∑PAHs, ∑PCBs and ∑OCPs were between 0.00 and 0.32 mg/kg, 0.00-0.53 mg/kg and 0.04-2.02 mg/kg, respectively. The results showed a correlation of -0.2, 0.8 and 0.2 between the number of MPs and the concentration of PAHs, PCBs and OCPs, respectively, suggesting that the potential risk of accumulation of plastic-sorbed PCBs is higher than those of OCPs and PAHs. Mann Whitney U test (at 95% confidence level) indicated no statistical difference in the concentration of organic pollutants in lagoon and beach MPs. In addition, we found no significant difference in the accumulation of organic pollutants in MPs from beach drift and high waterlines. The result suggests that the concentration of microplastics-sorbed organic pollutants in both ecosystems is comparable and likely to pose similar potential risks. We recommend that plastic pollution in all ecosystems require attention.

Adsorption of Different Pollutants by Using Microplastic with Different Influencing Factors and Mechanisms in Wastewater: A Review

The studies on microplastics are significant in the world. According to the literature, microplastics have greatly specific surface areas, indicating high adsorption capacities for highly toxic pollutants in aquatic and soil environments, and these could be used as adsorbents. The influencing factors of microplastic adsorption, classification of microplastics, and adsorption mechanisms using microplastics for adsorbing organic, inorganic, and mixed pollutants are summarized in the paper. Furthermore, the influence of pH, temperature, functional groups, aging, and other factors related to the adsorption performances of plastics are discussed in detail. We found that microplastics have greater advantages in efficient adsorption performance and cost-effectiveness. In this paper, the adsorptions of pollutants by microplastics and their performance is proposed, which provides significant guidance for future research in this field.

Microplastics in the Gulf of Mexico: A Bird’s Eye View

Microplastic debris is a persistent, ubiquitous global pollutant in oceans, estuaries, and freshwater systems. Some of the highest reported concentrations of microplastics, globally, are in the Gulf of Mexico (GoM), which is home to the majority of plastic manufacturers in the United States. A comprehensive understanding of the risk microplastics pose to wildlife is critical to the development of scientifically sound mitigation and policy initiatives. In this review, we synthesize existing knowledge of microplastic debris in the Gulf of Mexico and its effects on birds and make recommendations for further research. The current state of knowledge suggests that microplastics are widespread in the marine environment, come from known sources, and have the potential to be a major ecotoxicological concern for wild birds, especially in areas of high concentration such as the GoM. However, data for GoM birds are currently lacking regarding typical microplastic ingestion rates uptake of chemicals associated with plastics by avian tissues; and physiological, behavioral, and fitness consequences of microplastic ingestion. Filling these knowledge gaps is essential to understand the hazard microplastics pose to wild birds, and to the creation of effective policy actions and widespread mitigation measures to curb this emerging threat to wildlife.

Nanoplastics in Aquatic Environments: Impacts on Aquatic Species and Interactions with Environmental Factors and Pollutants

Plastic production began in the early 1900s and it has transformed our way of life. Despite the many advantages of plastics, a massive amount of plastic waste is generated each year, threatening the environment and human health. Because of their pervasiveness and potential for health consequences, small plastic residues produced by the breakdown of larger particles have recently received considerable attention. Plastic particles at the nanometer scale (nanoplastics) are more easily absorbed, ingested, or inhaled and translocated to other tissues and organs than larger particles. Nanoplastics can also be transferred through the food web and between generations, have an influence on cellular function and physiology, and increase infections and disease susceptibility. This review will focus on current research on the toxicity of nanoplastics to aquatic species, taking into account their interactive effects with complex environmental mixtures and multiple stressors. It intends to summarize the cellular and molecular effects of nanoplastics on aquatic species; discuss the carrier effect of nanoplastics in the presence of single or complex environmental pollutants, pathogens, and weathering/aging processes; and include environmental stressors, such as temperature, salinity, pH, organic matter, and food availability, as factors influencing nanoplastic toxicity. Microplastics studies were also included in the discussion when the data with NPs were limited. Finally, this review will address knowledge gaps and critical questions in plastics’ ecotoxicity to contribute to future research in the field.

Adsorption of environmental contaminants on micro- and nano-scale plastic polymers and the influence of weathering processes on their adsorptive attributes

Increases in plastic-related pollution and their weathering can be a serious threat to environmental sustainability and human health, especially during the present COVID-19 (SARS-CoV-2 coronavirus) pandemic. Planetary risks of plastic waste disposed from diverse sources are exacerbated by the weathering-driven alterations in their physical-chemical attributes and presence of hazardous pollutants mediated through adsorption. Besides, plastic polymers act as vectors of toxic chemical contaminants and pathogenic microbes through sorption onto the 'plastisphere' (i.e., plastic-microbe/biofilm-environment interface). In this review, the effects of weathering-driven alterations on the plastisphere are addressed in relation to the fate/cycling of environmental contaminants along with the sorption/desorption dynamics of micro-/nano-scale plastic (MPs/NPs) polymers for emerging contaminants (e.g., endocrine-disrupting chemicals (EDCs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), pharmaceuticals and personal care products (PPCPs), and certain heavy metals). The weathering processes, pathways, and mechanisms governing the adsorption of specific environmental pollutants on MPs/NPs surface are thus evaluated in relation to the physicochemical alterations based on several kinetic and isotherm studies. Consequently, the detailed evaluation on the role of the complex associations between weathering and physicochemical properties of plastics should help us gain a better knowledge with respect to the transport, behavior, fate, and toxicological chemistry of plastics along with the proper tactics for their sustainable remediation.

A Review on Modification Methods of Adsorbents for Naphthalene in Environment

Naphthalene is one of the most hazardous polycyclic aromatic hydrocarbons to public health. This paper comprehensively summarized the recent development of modification methods of adsorbents for naphthalene removal in the environment. Various modification methods used in the adsorbent were summarized, mainly including acid oxidation modification, salt modification, doping modification, amino modification, microwave modification, and plasma modification. These methods enhance the adsorption performance of naphthalene mainly by changing the pore size and the oxygen content on the surface of the adsorbent. The modification parameters and their effects on naphthalene removal as well as the advantages and disadvantages of each method are described in detail. This review provides the necessary inspiration and guidance for the researchers who develop polycyclic aromatic hydrocarbons adsorption materials in the environment.

Microplastics lag the leaching of phenanthrene in soil and reduce its bioavailability to wheat

Microplastics wildly occur in soil and they can become the carriers of persistent contaminants. However, the influence of microplastics on polycyclic aromatic hydrocarbons vertical translocation in the soil system after rainfall is limitedly understood. Here, experiments were conducted to study the influence of polyethylene (PE), polystyrene (PS) and polyvinyl chloride (PVC) microplastics on the leaching behavior and bioavailability of phenanthrene (Phe). The adsorption capacity of phenanthrene on the microplastics followed the order of PS > PE > PVC. The Phe concentrations in the top soil layer after 15 days of leaching with water were 30.25, 28.32 and 27.25 mg kg^-1 for the treatments of Phe-PS, Phe-PE and Phe-PVC respectively, which is consistent with the adsorption capacities of microplastics. The concentrations of Phe were correlated with the microplastic adsorption capacities at soil depths of 5-45 cm. Under long-term leaching, Phe could reach the deeper soil layer. Phe concentrations significantly decreased in the leachate over time. Phe concentrations in wheat had a positive correlation with that in leachate/leached top soil layer. Our findings are beneficial to accurately evaluate the ecological risk of the combined contamination of PAHs and microplastics, and improve the understanding of the environmental behaviors of different microplastics.

Humic Acid and Fulvic Acid Hinder Long-Term Weathering of Microplastics in Lake Water

We investigated the photoaging of polypropylene (PP) microplastics (MPs) in lake water. The results showed that photoaging of PP MPs was significantly inhibited in lake water compared with ultrapure water after 12 d of ultraviolet (UV) irradiation, and humic acid and fulvic acid, rather than carbonate (CO₃^2-), nitrate (NO₃^-), or chloride (Cl^-) ions, were identified as the primary contributors to the observed inhibition. Mechanisms for the roles of humic acid (Suwannee River humic acid) and fulvic acid (Pony Lake fulvic acid) in reducing the rates of photodegradation showed that humic acid and fulvic acid acted as both reactive oxygen species (ROS) scavengers (e.g., of ^•OH) (dominant contribution) and optical light filters. As ROS scavengers, humic acid and fulvic acid significantly decreased the capacity for the formation of ^•OH and O₂^•- by PP MPs under irradiation. In addition, the chromophores in humic acid and fulvic acid competed for photons with MPs through the light-shielding effect, thereby causing less fragmentation of PP particles and changes in other properties (melting temperature, contact angle, and surface zeta potential). The proposed mechanisms for inhibition by humic acid and fulvic acid will aid our efforts to assess the duration of aging and alterations of MP properties during long-term weathering in natural waters.

Enhanced sequestration of tetracycline by Mn(II) encapsulated mesoporous silica nanoparticles: Synergistic sorption and mechanism

A novel Mn(II) encapsulated mesoporous silica nanoparticles (Mn-MSNs) was developed for efficiently removing antibiotic tetracycline from aqueous solutions. The material has a well-ordered, hexagonal mesopore structure with a large specific surface area (720 m²/g) and maximum sorption capacity (229 mg/g) that is about an order of magnitude higher than that of mesoporous silica nanoparticles without Mn-encapsulated, or encapsulated with other transition metal cations Fe³⁺ and Cu²⁺. Sorption results showed that the materials can sequestrate tetracycline within a large concentration range (5 μg/L-450 mg/L). Batch sorption experiment, spectroscopic analysis and density functional theory calculation collectively indicated that Mn-O complexation was the dominant mechanism for the tetracycline sorption. Electrostatic attraction and cation-π interaction also contributed to tetracycline sorption with their contribution levels varying with pH in a synergetic way with the Mn-O complexation. The Mn(II) encapsulated MSNs exhibited a good regeneration property over five repeated sorption-desorption cycles, demonstrating its promising potential in the cost-effective applications of sequestrating tetracycline from wastewater, drinking water, and contaminated solutions.

Comparing the sorption of pyrene and its derivatives onto polystyrene microplastics: Insights from experimental and computational studies

In this study, the sorption behaviors and mechanisms between polystyrene microplastics (micro-PS) and 4-rings polycyclic aromatic hydrocarbons (PAHs) pyrene (Pyr) and its derivatives (S-Pyr), including 1-methylpyrene (P-CH₃), 1-hydroxypyrene (P-OH), 1-aminopyrene (P-NH₂), 1-pyrenecarboxylic acid (P-COOH) were investigated at neutrality. The results revealed that the sorption rates of micro-PS for S-Pyr were higher than those for parent Pyr. Meanwhile, -CH₃ could slightly facilitate the sorption, whereas -OH, P-NH₂, and P-COOH intensively inhibit the sorption of S-Pyr onto micro-PS. The sorption capacities of Pyr/S-Pyr increased with decreasing size of micro-PS. Besides, the effects of salinity and temperature on the sorption characteristics of micro-PS for Pyr/S-Pyr depended on their substituents. Combined with experimental and computational methods, it could be concluded that the main sorption mechanisms were possibly hydrophobic interaction, π-π interaction and pore-filling. The observations reported here could improve predictions of environmental behaviors and bioavailability of PAHs and micro-PS.

Microplastics fouling and interaction with polymeric membranes: A review

The emergence and accumulation of microplastics (MPs) in various aquatic environments have recently raised significant concerns. Wastewater treatment plants (WWTPs) have been identified as one of the major sources of MPs discharge to the environment, implying a substantial need to improve advanced techniques for more efficient removal of MPs. Polymeric membranes have been proven effective in MPs removal. However, fouling is the main drawback of membrane processes and MPs can foul the membranes due to their small size and specific surface properties. Hence, it is important to investigate the impacts of MPs on membrane fouling to develop efficient membrane-based techniques for MPs removal. Although membrane technologies have a high potential for MPs removal, the interaction of MPs with membranes and their fouling effects have not been critically reviewed. The purpose of this paper is to provide a state-of-the-art review of MPs interaction with membranes and facilitate a better understanding of the relevant limitations and prospects of the membrane technologies. The first section of this paper is dedicated to a review of recent studies on MPs occurrence in WWTPs aiming to determine the most frequent MPs. This is followed by a summary of recent studies on MPs removal using membranes and discussions on the impact of MPs on membrane fouling and other probable issues (abrasion, concentration polarisation, biofouling, etc.). Finally, some recommendations for further research in this area are highlighted. This study serves as a valuable reference for future research on the development of anti-fouling membranes considering these new emerging contaminates.

Adsorption of micropollutants onto realistic microplastics: Role of microplastic nature, size, age, and NOM fouling

This work aims at evaluating the role of nature, size, age, and natural organic matter (NOM) fouling of realistic microplastics (MPs) on the adsorption of two persistent micropollutants (diclofenac (DCF) and metronidazole (MNZ)). For such goal, four representative polymer types (polystyrene (PS), polyethylene terephthalate (PET), polypropylene (PP) and high-density polyethylene (HDPE)) were tested. MPs were obtained by cryogenic milling of different commercial materials (disposable bottles, containers, and trays), and fully characterized (optical microscopic and SEM images, FTIR, elemental analysis, water contact angle and pH_slurry). The micropollutants hydrophobicity determined to a high extent their removal yield from water. Regardless of the MP's nature, the adsorption capacity for DCF was considerably higher than the achieved for MNZ, which can be related to its stronger hydrophobic properties and aromatic character. In fact, aromatic MPs (PS and PET) showed the highest adsorption capacity values with DCF (~100 μg g^-1). The MP size also played a key role on its adsorption capacity, which was found to increase with decreasing the particle size (20-1000 μm). MPs aging (simulated by Fenton oxidation) led also to substantial changes on their sorption behavior. Oxidized MPs exhibited acidic surface properties which led to a strong decrease on the adsorption of the hydrophobic micropollutant (DCF) but to an increase with the hydrophilic one (MNZ). NOM fouling (WWTP effluent, river water, humic acid solution) led to a dramatic decrease on the MPs sorption capacity due to sorption sites blocking. Finally, the increase of pH or salinity of the aqueous medium increased the micropollutants desorption.

The impacts of weathering on concentration and bioaccessibility of organic pollutants associated with plastic pellets (nurdles) in coastal environments

Nurdles, the pre-production plastic pellets, are a major source of plastic pollution in marine environments due to unregulated spills during production and transportation. We analyzed the types of plastics and associated organic pollutants on nurdles collected along the shoreline of Gulf of Mexico in Texas. Our results showed that the nurdles were made from polyethylene (81.9%) and polypropylene (18.1%). Polycyclic aromatic hydrocarbons (PAHs, 16 US EPA priority) and polychlorinated biphenyls (PCBs, 7 commercial congeners) sorbed to the nurdles were in concentration ranges of 1.6-14,700 ng/ g and 0-642 ng/ g, respectively. Heavily weathered nurdles tended to have higher concentrations of PAHs and PCBs than lightly weathered ones. The bioaccessibility of sorbed contaminants was evaluated using a simulated intestinal fluid. The results showed that the associated PAHs were more bioaccessible in lightly weathered nurdles (13.1 ± 2.3%) than heavily weathered one (5.3 ± 0.1%), and that no PCBs were bioaccessible. These findings are informative for toxicity evaluation and resource management of plastic debris in coastal environments.

The reactive oxygen species as pathogenic factors of fragmented microplastics to macrophages

The presence of microplastics in the various food web raised concerns on human health, but little is known about the target cells and mechanism of toxicity of microplastics. In this study, we evaluated the toxicity of microplastics using relevant cell lines to the oral route of exposure. Approximately 100 μm-sized fragment-type polypropylene (PP) and polystyrene (PS) particles were prepared by sieving after pulverization and further applied the accelerated weathering using ultraviolet and heat. Thus, the panel of microplastics includes fresh PP (f-PP), fresh PS (f-PS), weathered PP (w-PP), and weathered PS (w-PS). The spherical PS with a similar size was used as a reference particle. Treatment of all types of PP and PS did not show any toxic effects to the Caco-2 cells and HepG2 cells. However, the treatment of microplastics to THP-1 macrophages showed significant toxicity in the order of f-PS > f-PP > w-PS > w-PP. The weathering process significantly reduced the reactive oxygen species (ROS) generation potential of both microplastics because the weathered microplastics have an increased affinity to bind serum protein which acts as a ROS scavenger. The intrinsic ROS generation potential of microplastics showed a good correlation with the toxicity endpoints including cytotoxicity and pro-inflammatory cytokines in THP-1 macrophages. In conclusion, the results of this study suggest that the target cell type of microplastics via oral administration can be macrophages and the pathogenic factor to THP-1 macrophages is the intrinsic ROS generation potential of microplastics. Nevertheless, the toxic effect of microplastics tested in this study was much less than that of nano-sized particles.

Adsorption behavior of organic pollutants on microplastics

Microplastics (MPs) are emerging pollutants that act as a carrier of toxic pollutants, release toxic substances, and aggregate in biota. The adsorption behavior of MPs has recently become a research hot spot. The objective of this study was to summarize the main mechanisms by which MPs adsorb organic pollutants, introduce some mathematical models commonly used to study the adsorption behavior of MPs, and discuss the factors affecting the adsorption capacity from three perspectives, i.e., the properties of MPs and organic pollutants, and environmental factors. Adsorption kinetics and isothermal adsorption models are commonly used to study the adsorption of organic pollutants on MPs. We observed that hydrophobic interaction is the most common mechanism by which MPs adsorb organic pollutants, and also reportedly controls the portion of organic pollutants. Additionally, electrostatic interaction and other non-covalent forces, such as hydrogen bonds, halogen bonds, and π-π interactions, are also mechanisms of organic pollutant adsorption on MPs. The particle size, specific surface area, aging degree, crystallinity, and polarity of MPs, and organic pollutant properties (hydrophobicity and dissociated forms) are key factors affecting adsorption capacity. Changes in the pH, temperature, and ionic strength also affect the adsorption capacity. Current research on the adsorption behavior of MPs has mainly been conducted in laboratories, and in-depth studies on the adsorption mechanism and influencing factors are limited. Therefore, studies on the adsorption behavior of MPs in the environment are required, and this study will contribute to a better understanding of this topic.

Adsorption of fulvic acid onto polyamide 6 microplastics: Influencing factors, kinetics modeling, site energy distribution and interaction mechanisms

Information on the interactions of microplastics (MPs) with dissolved organic matter (DOM) is essential for understanding their environmental impacts. This study selected fulvic acid (FA) as a typical DOM to investigate the influence of contact time, temperature, dosage, solution pH, salinity, and coexisting metal ions on the adsorption of FA onto polyamide 6 (PA6) MPs. The adsorption kinetic and isotherm can be successfully described by mixed-order (MO) and Freundlich models. The adsorption site energy distribution based on the Freundlich equation was applied to analyze the interaction between FA and PA6-MPs and the adsorption site heterogeneity. Thermodynamic analysis demonstrated that the values of parameters (ΔG_ads^°, ΔS_ads^°, ΔH_ads^°) were significantly affected by initial solution concentrations and the adsorption process was spontaneous, endothermic, and randomness-increased. Fourier transform-infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed the importance of amide functional groups of PA6-MPs in controlling FA adsorption. Hydrogen bonds, hydrophobic, electrostatic, and n-π electron donor-acceptor (n-π EDA) interactions played different roles on adsorption of FA under different conditions of solution chemistry. These findings are beneficial to provide new insights involving the adsorption behavior and interaction mechanisms of FA onto PA6-MPs for the environmental risk assessment of MPs.

Matrix stiffening by self-mineralizable guided bone regeneration

Collagen membranes produced in vitro with different degrees of intrafibrillar mineralization are potentially useful for guided bone regeneration (GBR). However, highly-mineralized collagen membranes are brittle and difficult for clinical manipulation. The present study aimed at developing an intrafibrillar self-mineralization strategy for GBR membrane by covalently conjugating high-molecular weight polyacrylic acid (HPAA) on Bio-Gide® membranes (BG). The properties of the self-mineralizable membranes (HBG) and their potential to induce bone regeneration were investigated. The HBG underwent the progressive intrafibrillar mineralization as well as the increase in stiffness after immersed in supersaturated calcium phosphate solution, osteogenic medium, or after being implanted into a murine calvarial bone defect. The HBG promoted in-situ bone regeneration via stimulating osteogenic differentiation of mesenchymal stromal cells (MSCs). Hippo signaling was inhibited when MSCs were cultured on the self-mineralized HBG, and in HBG-promoted MSC osteogenesis during in-situ bone regeneration. This resulted in translocation of the transcription co-activators Yes-associated protein (YAP) and transcriptional coactivator with PDZ-binding motif (TAZ) into the nucleus to induce transcription of genes promoting osteogenic differentiation of MSCs. Taken together, these findings indicated that HBG possessed the ability to self-mineralize in situ via intrafibrillar mineralization. The increase in stiffness of the extracellular matrix expedited in-situ bone regeneration by inactivating the Hippo-YAP/TAZ signaling cascade. STATEMENT OF SIGNIFICANCE: Guided bone regeneration (GBR) membranes made of naturally derived collagen have been widely used in the bone defect restoration. However, application of collagen GBR membranes run into the bottleneck with the challenges like insufficient stress strength, relatively poor dimensional stability and unsatisfactory osteoinductivity. This study develops a modified GBR membrane that can undergo progressive self-mineralization and matrix stiffening in situ. Increase in extracellular matrix stiffness provides the mechanical cues required for MSCs differentiation and expedites in-situ bone regeneration by inactivating the Hippo-YAP/TAZ signaling cascade.

Sorption of chemical contaminants on degradable and non-degradable microplastics: Recent progress and research trends

Microplastics (<5 mm) are ubiquitous contaminants of growing concern. These have been found in multiple environmental compartments, including remote sites where anthropogenic activity is null. Once released, microplastics interact with multiple chemicals in the environment, many of which are classified as organic contaminants or heavy metals. Some contaminants have an affinity for microplastics, attributed to certain sorption mechanisms, and thus become vectors of hazardous chemicals. Here, we focused on the sorption behavior of degradable and non-degradable microplastics, including field and laboratory experiments. We reviewed the sorption mechanisms, namely hydrophobic interactions, electrostatic interactions, pore-filling, Van der Waals forces, hydrogen bonding, and π-π interactions, and the factors strengthening or weakening these mechanisms. Then, we analyzed the literature investigating the sorption behavior of a wide range of chemicals contaminants on microplastics, and the current knowledge regarding the occurrence of organic contaminants and heavy metals on microplastics extracted from the environment. The future perspectives and research priorities were discussed. It is apparent that degradable microplastics, such as polylactic acid or polybutylene succinate, have a greater affinity for hydrophobic contaminants than conventional synthetic non-degradable microplastics according to recent studies. However, studies assessing degradable microplastics are scarce and much research is required to further prove this point. We stated several knowledge gaps in this new line of research and suggest the future studies to follow an integrative approach, allowing to comprehend the multiple factors involved, such as ecotoxicity, bioaccumulation, and fate of the chemical contaminants.

Organic Contaminants and Interactions with Micro- and Nano-Plastics in the Aqueous Environment: Review of Analytical Methods

Micro- and nanoplastic particles are increasingly seen not only as contaminants themselves, but also as potential vectors for trace organic chemicals (TOrCs) that might sorb onto these particles. An analysis of the sorbed TOrCs can either be performed directly from the particle or TOrCs can be extracted from the particle with a solvent. Another possibility is to analyze the remaining concentration in the aqueous phase by a differential approach. In this review, the focus is on analytical methods that are suitable for identifying and quantifying sorbed TOrCs on micro- and nano-plastics. Specific gas chromatography (GC), liquid chromatography (LC) and ultraviolet-visible spectroscopy (UV-VIS) methods are considered. The respective advantages of each method are explained in detail. In addition, influencing factors for sorption in the first place are being discussed including particle size and shape (especially micro and nanoparticles) and the type of polymer, as well as methods for determining sorption kinetics. Since the particles are not present in the environment in a virgin state, the influence of aging on sorption is also considered.

Amino, nitro, chloro, hydroxyl and methyl substitutions may inhibit the binding of PAHs with DNA

The binding of PAHs with DNA to form PAH-DNA adducts is a crucial step in PAH-induced carcinogenesis. How functional groups affect this binding is largely unknown. Here, we observed that functional group substitutions strongly inhibited PAH-DNA binding. Additionally, -OH substitution has the most potent inhibitory effect as it causes the smallest change in the electrostatic surface potential. Fourier transform infrared spectroscopy and molecular docking analyses demonstrated that PAH derivatives bind with guanine via intercalation and groove binding and then non-specifically insert into the major/minor grooves of DNA. Quantum chemical calculations suggested that hydrogen/halogen bonding may be essential in affecting the binding of functional group-substituted PAHs with DNA. It was further revealed that Log K_OA and the PAH derivatives' melting points correlated significantly with binding affinity, implying that changes in the physicochemical characteristics are important factors. This study opens a new window for understanding the relationship between highly toxic PAH derivatives and genetic materials.