Microplastics in real wastewater treatment schemes: Comparative assessment and relevant inhibition effects on anaerobic processes

From wastewater to sludge: The role of microplastics in shaping anaerobic digestion performance and antibiotic resistance gene dynamics

The presence of microplastics (MPs) in wastewater treatment plants (WWTPs) disrupt processes and threaten the effectiveness of anaerobic digestion (AD), raising critical environmental and operational concerns. This review assesses MP occurrence in WWTPs and its effects on biogas production and the fate of antibiotic resistance genes (ARGs) during AD to understand their impact on process efficiency and environmental health. Polypropylene (PP) and polyethylene (PE) are the most prevalent types of MPs which are found in WWTP influent at an average concentration of 801.5 particles per liter (P/L), decrease to 38.3 P/L in effluent, and accumulate in sludge at 70.5 P/L. The effect of MPs on AD performance is influenced by MP type, concentration, size, and AD conditions (i.e., feed substrate, reactor configuration, temperature, and incubation time). For example, certain MPs (polyamide 7 (PA7) and PP) increase methane production by 39.5 %, while aged MPs decrease it by 47.2 %. The review also explores how AD drives MP degradation mechanisms like oxidation, hydrolysis, mechanical stress, and biodegradation. Additionally, MPs significantly impact ARGs, with abundance increasing by 0.4-514.4 %, especially with aged MPs. Mechanistic effects of MPs on ARGs dissemination were also discussed, including horizontal gene transfer (reactive oxygen species production, cell membrane permeability, extracellular polymeric substances secretion, and ATP dynamics), vertical gene transfer, microbial community, and adsorbing pollutants. This analysis provides insights into the complex interactions between MPs, microbial processes, and ARGs, highlighting their implications for wastewater treatment and biogas production systems.

Effects of microplastics accumulation and antibiotics contamination in anaerobic membrane bioreactors for municipal wastewater treatment

Municipal wastewater treatment plants are the main collection points for plastics and antibiotics. Anaerobic membrane bioreactor (AnMBR) is one the most potential municipal wastewater treatment technologies. This study evaluated the impact of microplastic (aged polyvinyl chloride, aged PVC, 1.5 g/L), antibiotics (ciprofloxacin, CIP, 100 μg/L) and their interaction effect on AnMBR treatment performance and membrane fouling. Results showed that the inhibition of CIP on AnMBR organic removal and methane production was intensified, owing to the CIP adsorption on aged PVC. The enzyme activities of electron transport (ETS), adenosine triphosphate (ATP) and F420 were also significantly restrained by 47-52 % with combined exposure. The combined effects also significantly aggravated the membrane fouling of AnMBR, which shorted the membrane operational period by half due to more soluble microbial products (SMP) secretion. The microbial diversity analyses indicated that aged PVC and CIP addition can accumulate some main anaerobic fermentation bacteria but inhibit the archaea. The abundance of related enzyme in the acetoclastic and hydrogenotrophic methanogenesis decreased with the sole aged PVC and CIP addition and severely inhibited with their combine effect. The absolute abundance mcrA significantly reduced by 92 % with combined exposure, validating the negative impact on methanogenic activity. These findings provide valuable insight into the AnMBR implementation in complex wastewater treatment.

Methodologic insights aimed to set-up an innovative Laser Direct InfraRed (LDIR)-based method for the detection and characterization of microplastics in wastewaters

Wastewater treatment plants (WWTPs) are generally reported to be effective in removing microplastics (MPs). Nevertheless, the lack of standardized methodologies for their counting and characterization hinders direct comparison across literature reports, limiting the establishment of reliable benchmarks. In this perspective, this work aimed to provide methodological insights on a feasible approach for detecting and characterizing MPs in both raw and treated wastewater by exploiting the innovative Laser Direct InfraRed (LDIR) technique. MPs of various polymeric nature, size and shape were specially produced and used to fine-tune and validate a LDIR-based method for both their chemical identification and size/morphology description, while well-established techniques were employed to evaluate the reliability of collected data. The robustness of the tailored protocol was then assessed through a monitoring campaign conducted at a large municipal WWTP in Tuscany (Italy), for which an average MPs removal efficiency of 82 % was estimated. Various polymers were detected in the processed samples, with a high relative content of cellulose-based materials in both influent and effluent (32 % and 54 % of particles, respectively). Most MPs had a characteristic size lower than 100 μm, with particles <30 μm representing about 45 % and 29 % of MPs in the influent and effluent, respectively. MPs were in the form of fibers (25-39 %), fragments (32-43 %) and pellets (29-32 %). The consistency of the obtained results suggested the robustness and reliability of the proposed LDIR-based method, highlighting its potential for more in-depth monitoring of MPs in WWTPs.

Microplastics influencing aquatic environment and human health: A review of source, determination, distribution, removal, degradation, management strategy and future perspective

Microplastics (MPs) are produced from various primary and secondary sources and pose multifaceted environmental problems. They are of non-biodegradable nature and may stay in aquatic environments for a long time period. The present review has covered novel aspects pertaining to MPs that were not covered in earlier studies. It has been observed that several methods are being employed for samples collection, extraction and identification of MPs and polymer types using various equipment, chemicals and instrumental techniques. Aquatic species mistakenly ingest MPs, considering them prey and through food-chain, and then suffer from various metabolic disorders. The consumption of seafood and fish may consequently cause health implications in humans. Certain plasticizers are added during manufacturing to provide colour, durability, flexibility, and strength to plastics, but they leach out during usage, storage, and transport, as well as after entering the bodies of aquatic species and human beings. The leached chemicals (bisphenol-A, triclosan, phthalates, etc.) act as endocrine disrupting chemicals (EDCs), which effect on homeostasis; thereby causing neurotoxicity, cytotoxicity, reproductive problems, adverse behaviour and autism. Negative influence of MPs on carbon sequestration potential of water bodies is also observed, however more studies are required to understand it with a detail mechanism under natural conditions. The wastewater treatment plants are found to remove a large amount of MPs, but in turn, also act as significant sources of their release in sludge and effluents. Further, it is covered that how advanced oxidation processes, thermal- and photo-oxidation, fungi, algae and microbes degrade the plastics and increase their numbers in the surrounding environment. The management strategy comprising recovery of energy and other valuable by-products from plastic wastes, recycling and regulatory framework; are also described in detail. The future perspectives can be of paramount importance to control MPs generation and their abundance in the aquatic and other types of environments. The studies in future need to focus on advanced filtration techniques, advanced oxidation processes, energy recovery from plastic wastes and influences of MPs on carbon sequestration in aquatic environment and human health.

Mesophilic anaerobic digestion of mixed sludge in CSTR and AnMBR systems: A perspective on microplastics fate

Most microplastics (MPs) end up in the biosolids produced in wastewater treatment plants (WWTPs) and can pose contamination risks when the biosolids are applied to agriculture. This study evaluated the impact of mesophilic anaerobic digestion on the fate of MPs in WWTP sludge. For this, two laboratory-scale anaerobic digesters were operated in parallel, consisting of a continuous stirred tank reactor (CSTR) and a membrane bioreactor (AnMBR) equipped with an ultrafiltration membrane to decouple the hydraulic and sludge retention times. Both digesters were continuously fed with mixed sludge from a municipal WWTP. The results showed a significant reduction in the MP concentration, with the AnMBR having the higher MP removal efficiency (88.6% vs. 62.1%) and obtaining a higher percentage of biomethanisation (58.3% vs. 43.7%). Polypropylene (PP) and polyacrylonitrile were the main polymers in the mixed sludge, while PP and polyethylene were the dominant polymers in the digested samples. The MP particles in all the samples were predominantly in the 500-104 μm size range. Microbiological analysis indicates a greater species diversity in the microbial community of the AnMBR, the results also revealed a symbiotic relationship between the Firmicutes and Patescibacteria phyla in this digester.

A review of methods for mitigating microplastic contamination in biosolids from wastewater treatment plants before agricultural soil application

Wastewater treatment plants (WWTP) are recognized as major sources of microplastic (MP) particles in terrestrial environments, particularly in agricultural soils through biosolids application. While many reviews have focused on the distribution, detection, and mitigation of MPs in wastewater effluent to limit their discharge into oceans, our understanding of methods to mitigate biosolid contamination remains limited. This review focuses on methods for mitigating MPs contamination in biosolids at various intervention points, including sources, WWTP including the primary and secondary treatment stages where sludge is generated, and post-contamination. These methods are categorized as physical, physicochemical, and biological approaches, and their advantages and limitations are discussed. For instance, physicochemical methods, especially froth flotation, are cost-effective but are hindered by contaminants and reagents. Physical methods like microfibre filtration devices (MFD) are safe but their efficiency depends on the filter pore size and design. Biological methods, particularly microbial degradation, are limited by the varying efficiencies of microorganisms in breaking down MPs and the extended time required for their effective degradation. Other physical methods including dissolved air flotation, and ultrasonication already exist in WWTPs but may require retrofitting or optimization to enhance MP removal from biosolids. As each method inherently has limitations, the key to achieving MP-free biosolids, and thus preventing their release into agricultural soil, lies in integrating these methods through multi-coupling strategies.

Behavior and flow of microplastics during sludge treatment in Japan

Microplastic (MP) pollution is a growing public and scientific concern. In urban environments, wastewater treatment plants (WWTPs) are major sources of MPs. This study sampled sludge and separated water from each sludge treatment unit in two WWTPs in Osaka, Japan. Analyzing method for MPs in sewage sludge was optimized, ultrasonic pretreatment and double digestion were introduced into the analyzing method of MPs in sewage sludge, recovering test of standard MPs proved its high efficiency. Then MPs larger than 100 μm were extracted and analyzed, their size and type were recorded, the MP concentration was calculated, and the MP flow in the sludge treatment system was estimated. MPs were detected at every step of the sludge treatment process, and 13 types of MPs were identified. The MP concentration in sludge ranged from 81 ± 48 to 6470 ± 1490 particles/kg dry sludge (DS). In the separated water, MP concentrations were much lower, ranging from 0 to 1740 ± 794 particles/kg DS. During the thickening and dewatering processes, nearly all MPs were transferred into thickened or dewatered sludge; only 5-10 % of MPs returned to the primary sedimentation pond with the separated water. The most common types of MPs were PMMA, PE, and PS. No significant differences in MP type distributions were observed among sampling batches; however, significant differences in a few types of MPs were detected between treatment units, which requires further investigation. All detected MPs were smaller than 1000 μm; larger MPs might have been removed in the grit chamber before reaching the primary or secondary sedimentation ponds. Overall, the particle size distribution did not substantially change during sludge treatment.

Extraction and analysis of microplastics in wastewater sludges of a multi-product pulp and paper mill

Pulp and paper wastewater sludges are waste streams produced in major quantities across the world. The recycling of these organic sludges, for example to soil amendments, is desired in the circular economy but carries the risk of potential pollutants to be also introduced into the environment. Pulp and paper wastewater sludges have been scarcely studied matrices in the microplastic research due to their complex composition. In this study, we optimized an extraction process for microplastics from pulp and paper wastewater sludges, and quantified and characterized microplastics down to 20 μm in primary sludge and biosludge generated at the wastewater treatment plant of a multi-product pulp and paper mill in Finland. The occurrence of microplastics was high in primary sludge, 900-1600 microplastics g-1 dry weight, while the maximum number of detected microplastics in biosludge samples remained at 210 g-1 dry weight. Biosludge samples suffered from larger amounts of remaining solids after the extraction process, thus compromising the detection of smaller microplastics (<100 μm) and increasing the uncertainty related to the interpretation of the results. The most prevalent microplastic shape in all samples was fragment, and the most recurring polymer types were polyethylene and polypropylene, while a polystyrene-based copolymer represented approximately 10% of identified microplastics in primary sludge. The present study advances the development of microplastic analysis of the challenging pulp and paper wastewater sludges and brings novel information to the progressing discussion of their circulation potential.

Microplastics in urban water cycles: Looking for a more scientific approach for sampling and characterization in wastewater and drinking water treatment plants

Specific campaigns to detect microplastics (MPs) in the urban water cycle were carried out in three drinking water plants and two wastewater treatment plants. A self-designed sampler for MPs detection in water matrices was in this study preliminary validated and then tested in long term campaigns sampling up to 1000 L. Raw drinking water and wastewater show microplastics (MPs) concentrations of 2-11 and of 480-801 MPs/m3, respectively, and MPs removals of 47-78 % and of 84-98 %, correspondingly. Specific roles of chemical and physical conventional processes in microplastics removals were investigated. Solid-liquid separation, flotation and filtration are the main processes for achieving high microplastics removal. Regarding concentrated matrices, MPs concentrations in sludge samples varied in the range of 5000-500,000 MPs/m3. Finally, shapes, size classes and polymers' typologies were investigated in the extracted MPs. The detected sizes are mainly 0.5-0.1 mm in drinking waters while 5-1 mm in wastewaters. Wastewaters were predominated by synthetic fibers (polyester type), while drinking waters were mainly characterized by fragments and the fibers were mostly of natural origin. Finally, the results of this study supported best practices and guidelines for a representative assessment of MPs in water (sampling methods, extraction procedures, characterization and quantification).

Accumulation of persistent organic pollutants by MPs in coastal wastewater treatment plants

The abundance and fate of microplastics (MPs) in wastewater treatment plants (WTPs) has been reported extensively. However, in the wastewater, the extent to which hazardous chemicals such as persistent organic pollutants (POPs) accumulated by MPs not been clearly explored. In this study, MPs was sampled from influents and effluents in WTPs to characterize POPs in sorption within MPs. The highest concentrations of PCDD/Fs, PBDD/Fs, PBDEs, and PCBs in sorption within MPs from untreated influents were 5310, 2310, 5,220,000, and 22,700 pg/g, respectively. The most toxic congener, 1,2,3,7,8-PeCDD, accounts for up to 32.3 % of the contribution to PCDD/Fs within MPs. Furthermore, the concentration of PCDD/Fs within MPs from untreated influents could be up to 27.7 times higher than that in microplastic pellets on the coastal beach. This study highlights the quantitative evidence of the POPs within MPs present in untreated influents.

Microplastics in wastewater and sludge from centralized and decentralized wastewater treatment plants: Effects of treatment systems and microplastic characteristics

Domestic wastewater treatment plants (WWTPs) play a vital role in limiting the release of microplastics (MP) into the environment. This study examined MP removal efficiency from five centralized and four decentralized domestic WWTPs in Bangkok, Thailand. MP concentrations in wastewater and sludge were comparable between centralized and decentralized WWTPs, despite these decentralized WWTPs serving smaller populations and having limited treatment capacity. The elimination of MPs ranged from 50 to 96.8% in centralized WWTPs and 14.2-53.6% in decentralized WWTPs. It is noted that the retained MPs concentrations in sludge ranged from 20,000 to 228,100 MP/kg dry weight. The prevalence of synthetic fibers and fragments could be attributed to their pathways from laundry or car tires, and the accidental release of a variety of plastic wastes ended up in investigated domestic WWTPs. Removal of MPs between the centralized and decentralized WWTPs was influenced by several impact factors including initial MP concentrations, longer retention times, MP fragmentation, and variations of MP concentrations in sludge leading to different activated sludge process configurations. Sewage sludge has become a primary location for the accumulation of incoming microplastics in WWTPs. The MPs entering and leaving each unit process were varied due to the unique characteristics of MPs, and their different treatment efficiencies. While the extended hydraulic retention period in decentralized WWTPs decreased the MP removal efficacy, the centralized WWTP with the two-stage activated sludge process achieved the highest MP removal efficiency.

A review of microplastics on anammox: Influences and mechanisms

Microplastics (MPs) are prevalent in diverse environmental settings, posing a threat to plants and animals in the water and soil and even human health, and eventually converged in wastewater treatment plants (WWTPs), threatening the stable operation of anaerobic ammonium oxidation (anammox). Consequently, a comprehensive summary of their impacts on anammox and the underlying mechanisms must be provided. This article reviews the sources and removal efficiency of MPs in WWTPs, as well as the influencing factors and mechanisms on anammox systems. Numerous studies have demonstrated that MPs in the environment can enter WWTPs via domestic wastewater, rainwater, and industrial wastewater discharges. More than 90% of these MPs are found to accumulate in the sludge following their passage through the treatment units of the WWTPs, affecting the characteristics of the sludge and the efficiency of the microorganisms treating the wastewater. The key parameters of MPs, encompassing concentration, particle size, and type, exert a notable influence on the nitrogen removal efficiency, physicochemical characteristics of sludge, and microbial community structure in anammox systems. It is noteworthy that extracellular polymer secretion (EPS) and reactive oxygen stress (ROS) are important impact mechanisms by which MPs exposure affects anammox systems. In addition, the influence of MPs exposure on the microbial community structure of anammox cells represents a crucial mechanism that demands attention. Future research endeavors will delve into additional crucial parameters of MPs, such as shape and aging, to investigate their effects and mechanisms on anammox. Furthermore, the effective mitigation strategies will also be developed. The paper provides a fresh insight to reveal the influences of MPs exposure on the anammox process and its influence mechanisms, and lays the groundwork for further exploration into the influence of MPs on anammox and potential mitigation strategies.

Microplastics removal efficiency and risk analysis of wastewater treatment plants in Oman

Microplastics (MPs) have recently been documented as an emerging pollutant that poses a critical threat to environment. Wastewater treatment plants (WWTPs) are commonly regarded as significant contributors to the presence of MPs. This study aimed to assess the MPs load of three wastewater treatment facilities in Oman using various treatments, including MBR, SBR, and CAS. Wastewater samples from influent, effluent, and sludge were collected and analyzed to determine the concentration, morphology, size, color, and polymer type of the MPs. A set of sieves with a mesh size range of 1 mm-45 μm was used to for filtration. Oxidation treatment was applied for all samples using Fenton's reagent, followed by density separation by sodium chloride solution. The Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR- FTIR) method was utilized to test 10% from each sampling point to confirm the polymer types of the MPs. The pollution load index (PLI) and hazard index (HI) have been employed to assess the risk associated with the chemical toxicity and concentration of detected particles. The PROMETHEE method was used to rank the risk of sampling sites based on different criteria that posed potential ecological and human health risks. The results indicate that the average concentrations of 0.99 MP/L, 1.38 MP/L, and 0.93 MP/L were detected in the final treated effluent of WWTP A, WWTP B, and WWTP C, respectively. These concentrations correspond to overall removal efficiencies of 82.5%, 77.4%, and 79.2% for WWTP A, WWTP B, and WWTP C, respectively Most MPs found in tertiary effluent were smaller particles (425 μm) and fiber-shaped. The major types of MPs were polypropylene (PP), low-density polyethylene (LDPE), polyurethane (PU), polyethylene terephthalate (PET), and Polyvinyl chloride (PVC). This study showed that treated effluent and sludge release significant MPs into the environment.

Microplastics shaped performance, microbial ecology and community assembly in simultaneous nitrification, denitrification and phosphorus removal process

The widespread use of microplastics (MPs) has led to an increase in their discharge to wastewater treatment plants. However, the knowledge of impact of MPs on macro-performance and micro-ecology in simultaneous nitrification, denitrification, and phosphorus removal (SNDPR) systems is limited, hampering the understanding of potential risks posed by MPs. This study firstly comprehensively investigated the performance, species interactions, and community assembly under polystyrene (PS) and polyvinyl chloride (PVC) exposure in SNDPR systems. The results showed under PS (1, 10 mg/L) and PVC (1, 10 mg/L) exposure, total nitrogen removal was reduced by 3.38-10.15 %. PS and PVC restrained the specific rates of nitrite and nitrate reduction (SNIRR, SNRR), as well as the activities of nitrite and nitrate reductase enzymes (NIR, NR). The specific ammonia oxidation rate (SAOR) and activity of ammonia oxidase enzyme (AMO) were reduced only at 10 mg/L PVC. PS and PVC enhanced the size of co-occurrence networks, niche breadth, and number of key species while decreasing microbial cooperation by 5.85-13.48 %. Heterogeneous selection dominated microbial community assembly, and PS and PVC strengthened the contribution of stochastic processes. PICRUSt prediction further revealed some important pathways were blocked by PS and PVC. Together, the reduced TN removal under PS and PVC exposure can be attributed to the inhibition of SAOR, SNRR, and SNIRR, the restrained activities of NIR, NR, and AMO, the changes in species interactions and community assembly mechanisms, and the suppression of some essential metabolic pathways. This paper offers a new perspective on comprehending the effects of MPs on SNDPR systems.

A review of microplastics in wastewater treatment plants in Türkiye: Characteristics, removal efficiency, mitigation strategies for microplastic pollution and future perspective

The effluent of WWTPs is an important source of microplastics (MP) for the aquatic environment. In this review study, MPs in wastewater treatment plants (WWTP) in Türkiye and their removal from WWTPs are reviewed for the first time. First, MP characteristics in the influent and effluent of WWTPs in Türkiye are discussed. In the next section, the abundance of MPs in the influent and effluent of WWTPs in Türkiye and the MP removal efficiency of WWTPs in Türkiye are evaluated. Then, the results of studies on MP abundance and characteristics in Türkiye's aquatic environments are presented and suggestions are made to reduce MPs released from WWTPs into the receiving environments. Strategies for reducing MPs released to the receiving environment from WWTPs of Türkiye are summarized. In the last section, research gaps regarding MPs in WWTPs in Türkiye are identified and suggestions are made for future studies. This review paper provides a comprehensive assessment of the abundance, dominant characteristics, and removal of MPs in WWTPs in Türkiye, as well as the current status and deficiencies in Türkiye. Therefore, this review can serve as a scientific guide to improve the MP removal efficiency of WWTPs in Türkiye.

Impact of PVC microplastics in photodynamic inactivation of Staphylococcus aureus and MRSA

Photodynamic processes have found widespread application in therapies. These processes involve photosensitizers (PSs) that, when excited by specific light wavelengths and in the presence of molecular oxygen, generate reactive oxygen species (ROS), that target cells leading to inactivation. Photodynamic action has gained notable attention in environmental applications, particularly against pathogens and antibiotic-resistant bacteria (ARB) that pose a significant challenge to public health. However, environmental matrices frequently encompass additional contaminants and interferents, including microplastics (MPs), which are pollutants of current concern. Their presence in water and effluents has been extensively documented, highlighting their impact on conventional treatment methods, but this information remains scarce in the context of photodynamic inactivation (PDI) setups. Here, we described the effects of polyvinyl chloride (PVC) microparticles in PDI targeting Staphylococcus aureus and its methicillin-resistant strain (MRSA), using curcumin as a PS under blue light. The presence of PVC microparticles does not hinder ROS formation; however, depending on its concentration, it can impact bacterial inactivation. Our results underscore that PDI remains a potent method for reducing bacterial concentrations in water and wastewater containing ARB, even in highly contaminated scenarios with MPs.

Can plastic pollution drive the emergence and dissemination of novel zoonotic diseases?

As the volume of plastic in the environment increases, so too does human interactions with plastic pollution. Similarly, domestic, feral, and wild animals are increasingly interacting with plastic pollution, highlighting the potential for contamination of plastic wastes with animal faeces, urine, saliva, and blood. Substantial evidence indicates that once in the environment, plastics rapidly become colonised by microbial biofilm (the so-called 'plastisphere), which often includes potentially harmful microbial pathogens (including pathogens that are zoonotic in nature). Climate change, increased urbanisation, and the intensification of agriculture, mean that the three-way interactions between humans, animals, and plastic pollution are becoming more frequent, which is significant as almost 60% of emerging human infectious diseases during the last century have been zoonotic. Here, we critically review the potential for contaminated environmental plastics to facilitate the evolution of novel pathogenic strains of microorganisms, and the subsequent role of plastic pollution in the cyclical dissemination of zoonotic pathogens. As the interactions between humans, animals, and plastic pollution continues to grow, and the volume of plastics entering the environment increases, there is clearly an urgent need to better understand the role of plastic waste in facilitating zoonotic pathogen evolution and dissemination, and the effect this can have on environmental and human health.

Microplastics' toxic effects and influencing factors on microorganisms in biological wastewater treatment units

Prior to entering the water body, microplastics (MPs) are mostly collected at the sewage treatment plant and the biological treatment unit is the sewage treatment facility's central processing unit. This review aims to present a comprehensive analysis of the detrimental impacts of MPs on the biological treatment unit of a sewage treatment plant and it covers how MPs harm the effluent quality of biological treatment processes. The structure of microbial communities is altered by MPs presence and additive release, which reduces functional microbial activity. Extracellular polymers, oxidative stress, and enzyme activity are explored as micro views on the harmful mechanism of MPs on microorganisms, examining the toxicity of additives released by MPs and the harm caused to microorganisms by harmful compounds that have been adsorbed in the aqueous environment. This article offers a theoretical framework for a thorough understanding of the potential problems posed by MPs in sewage treatment plants and suggests countermeasures to mitigate those risks to the aquatic environment.

Elimination microplastic particles in brine process water for ensuring the safety of brined cabbage

Various studies have investigated the presence of microplastics (MPs) in food and their potential hazardous impact on human health. The frequency of human exposure to MPs, particularly through the consumption of manufactured food and drinking water, is increasing. However, data regarding MP contamination in brine and brined cabbage used for the production of kimchi are limited. Here, we quantified MPs in brine process water during the production of brined cabbage. Pretreatment of the brine process water by performing a filtration step resulted in an MP-removal efficiency of 98.7-100%; 3671 ± 174 MP particles were observed in brining process water that was not filtered. A glass filter, STS filter, and Si Filter showed significant MP-removal efficiency, decreasing the number of MP particles in brining process water to 2,361, 2,775, and 3,490, respectively (p < 0.05). Our results provide data on how filtering of brine can effectively safeguard kimchi from MP contamination and e can be produced. However, to overcome the limitations of our laboratory-scale study, additional technologies should be used in the future for large-scale filtration processes.

Microplastic accumulation in sewer sediments and its potential entering the environment via combined sewer overflows: a study case in Paris

During wet weather events, combined sewer overflows (CSOs) transfer large amount of particulate matter and associated pollutants into surrounding water bodies, thereby deteriorating the recipients' ecological health. Resuspension of sewer sediments during these events contributes significantly to pollution level of these discharges. However, how much this in-sewer process contributes to CSOs' quality regarding microplastic (MP) pollution is little known. Therefore, an investigation on sewer deposits inside the Parisian combined sewer network was carried out. The study found high MP concentrations stored in this matrix, ranging from 5 × 103 to 178 × 103 particle/kg dry weight. Polymer composition is similar to what found in raw wastewater, containing a high proportion of polyethylene and polypropylene. Thus, the results indicated the persistence of MPs in sewer network during transport during dry weather periods to treatment facilities. Once resuspension of sewer deposits happens, MPs can be released into water flow and get discharged along with CSOs. This highlights another potential pathway of MPs into freshwater environment.

Abundance, characterization, and removal of microplastics in different technology-based sewage treatment plants discharging into the middle stretch of the Ganga River, India

Sewage treatment plants (STPs) are considered as a prominent source for releasing microplastics (MPs) into the riverine systems. Though MPs abundance and removal efficacy in different secondary treatment technique-based STPs have been extensively studied worldwide, such studies are scarce in Indian conditions. Herein, this study comprehensively assesses MPs abundance, characterization, and their removal in the selected secondary treatment technique-based STPs discharging into the middle stretch of the Ganga River in India. MPs concentration (n/L) in influent and effluent of the STPs varied between 42 ± 10 to 150 ± 19 and 3 ± 1 to 22 ± 5, respectively. Overall, the primary treatment stage was observed to remove MPs by 23-42 %, while the secondary treatment stage removed MPs by 67-90 %. Selected technique-based STPs exhibited varying MPs removal efficacies as follows: SBR (94 %), TF (90 %), AL (88 %), UASB (87 %), ASP (85 %), FAB (84 %), and Bio-tower (77 %). MPs ranging from 50 to 250 μm were the dominant sizes, with PP, PE, and PS being the prevalent polymers. The Ganga River receives about 3 × 108 MPs/day from STP effluents, and an estimated 4.5 × 107 MPs/day are released via the sludge. This comprehensive assessment of MPs abundance and removal from different technology-based Indian STPs will allow the comparison of the generated dataset with similar studies worldwide.

Revealing How Polyvinyl Chloride Microplastic Physicochemically Affect the Anaerobic Digestion of Waste Activated Sludge

Recent studies have shown that the microplastics in waste activated sludge (WAS) can directly reduce the microbial activity and influence the performance of anaerobic digestion. Unfortunately, few studies paid attention on the interactions between WAS and MPs, since MPs could impact the contact between sludge flocs and microorganisms. We found that PVC-MP changed the interfacial energy properties of the WAS surface and affected methane production. Low concentration (40 mg/L) of PVC-MP changed the water affinity and greatly reduced the energy barrier of interfacial reaction. Simultaneously, WAS surface charge characteristics changed with increasing MPs concentration, which made the sludge difficult to contact with microorganisms. The change process of WAS surface functional groups also indicated that PVC-MP first cover the sludge surface to prevent from being utilized by microorganisms, and then affect the surface protein structure before toxic substances leaching. Our study provides new insights into how MPs affect anaerobic digestion.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Sludge drying and dewatering processes influence the abundance and characteristics of microplastics in wastewater treatment plants

Wastewater treatment plants (WWTPs) have been identified as high-load receptors of microplastics (MPs) from different sources. However, the influence of specific treatment stanges requires further research. The main objective of this research was to evaluate the abundance and chemical characteristics of MPs in the sludge of two major wastewater treatment plants in the Agadir metropolis (Central Atlantic of Morocco). The Aourir plant receives urban influents and the inputs of the M'zar facility were urban and industrial. Samples were collected from the sludge matrices after primary settling, clarifying, dewatering, and drying systems. In addition, the effect of seasonality on MP load was assessed. The results showed that a higher abundance was noticed in raw sludge than in dewatered one in Aourir WWTP, while in M'zar WWTP, a very low decrease is noticed in dried sludge compared to raw sludge. The concentration of MPs in the summer season was significantly higher compared to other seasons for Aourir WWTP, while the winter season was higher for M'zar WWTP. Moreover, the most abundant shapes were fibers and the fraction 100-500 μm was the most preponderant. Eleven polymers were identified by ATR-FTIR, being polyester, polyethylene, polypropylene, and polystyrene the most abundant ones. Scanning Electron Microscopy coupled with Energy Dispersive X-ray revealed the visible degradation and fragmentation of MPs from sewage sludge and their ability to adsorb inorganic elements. It was estimated that between 2.2 × 107 and 7.4 × 108 MPs were evacuated with the sludge per day. The obtained findings confirmed that WWTP sludge acts as a vector of MPs with a high level of hazard to various matrices, such as landfills, agricultural soils, and groundwater. Overall, consideration must be given to the regulatory system managing the fate of sewage sludge to mitigate the collateral effects and provide solutions.

Degradation mechanism of microplastics and potential risks during sewage sludge co-composting: A comprehensive review

Microplastics (MPs) as a kind of emerging contaminants, widely exists in various kinds of medium, sewage sludge (SS) is no exception. In the sewage treatment process, a large number of microplastics will be deposited in SS. More seriously, microplastics in sewage sludge can migrate to other environmental media and threaten human health. Therefore, it is necessary to remove MPs from SS. Among the various restorations, aerobic composting is emerging as a green microplastic removal method. There are more and more reports of using aerobic compost to degrade microplastics. However, there are few reports on the degradation mechanism of MPs in aerobic composting, hindering the innovation of aerobic composting methods. Therefore, in this paper, the degradation mechanism of MPs in SS is discussed based on the environmental factors such as physical, chemical and biological factors in the composting process. In addition, this paper expounds the MPs in potential hazards, and combined with the problems in the present study were studied the outlook.

A review of microplastic removal from water and wastewater by membrane technologies

Microplastics (MPs) cannot be completely removed from water/wastewater in conventional wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). According to the literature analysis, membrane technologies, one of the advanced treatment technologies, are the most effective and promising technologies for MP removal from water and wastewater. In this paper, firstly, the properties of MPs commonly present in WWTPs/DWTPs and the MP removal efficiency of WWTPs/DWTPs are briefly reviewed. In addition, research studies on MP removal from water/wastewater by microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and membrane bioreactors (MBRs) are reviewed. In the next section, membrane filtration is compared with other methods used for MP removal from water/wastewater, and the advantages/disadvantages of the removal methods are discussed. Moreover, the problem of membrane fouling with MPs during filtration and the potential for MP release from polymeric membrane structure to water/wastewater are discussed. Finally, based on the studies in the literature, the current status and research deficiencies of MP removal by membrane technologies are identified, and recommendations are made for further studies.

Contemporary Drift in Emerging Micro(nano)plastics Removal and Upcycling Technologies from Municipal Wastewater Sludge: Strategic Innovations and Prospects

Purpose of Review

Annually, huge amounts of microplastics (MPs) are added to farmlands through sewage sludge (SS)/biosolid applications as a fertilizer. Most research emphasizes the enormity of the problem and demonstrates the fate, impacts, and toxicity of MPs during SS treatment processes and land applications. None has addressed the management strategies. To address the gaps, the current review evaluates the performance analysis of conventional and advanced sludge treatment methods in eliminating MPs from sludge.

Recent Findings

The review uncovers that the occurrence and characteristics of MPs in SS are highly governed by factors such as population density, speed and level of urbanization, citizens' daily habits, and treatment units in wastewater treatment plants (WWTPs). Furthermore, conventional sludge treatment processes are ineffective in eliminating MPs from SS and are accountable for the increased small-sized MPs or micro(nano)plastics (MNPs) along with altered surface morphology facilitating more co-contaminant adsorption. Simultaneously, MPs can influence the operation of these treatment processes depending on their size, type, shape, and concentration. The review reveals that research to develop advanced technology to remove MPs efficiently from SS is still at a nascent stage.

Summary

This review provides a comprehensive analysis of MPs in the SS, by corroborating state-of-the-knowledge, on different aspects, including the global occurrence of MPs in WWTP sludge, impacts of different conventional sludge treatment processes on MPs and vice versa, and efficiency of advanced sludge treatment and upcycling technologies to eliminate MPs, which will facilitate the development of mitigation measures from the systematic and holistic level.

Graphical Abstract

Microplastics in Sewage Sludge: A review

Microplastics (MPs) represent a serious problem for the environment and for this reason they have been studied in many articles, especially their presence in aquatic environments and soils. MPs have been found in wastewater and sewage sludge from municipal wastewater treatment plants (WWTPs). Most part of the published works have focused on the detection and elimination of MPs in the water line and several reviews have been published in the last years. In addition, the application of sewage sludge produced from WWTPs for agricultural use is known to be a primary source of MPs in soils. However, in the scientific literature less attention has been paid to the sludge and little is known about MPs fate when it is applied in agriculture. This work aims to give a global revision on the most used techniques to identify and detect MPs in sludges, their characteristics and incidence, their effect on sludge treatments and their impact on the environment. As far as we know, there are no standardized protocols for MPs extraction from soil and the possible repercussions on the cultivation of plants are not known. This review evidences that more studies are necessary to stablished standardized protocols and decipher the main mechanisms and the effects of MPs from sewage sludge in the environment.

Microplastics as an underestimated emerging contaminant in solid organic waste and their biological products: Occurrence, fate and ecological risks

Microplastics (MPs), as an emerging pollutant, have been widely detected in aquatic, terrestrial, and atmospheric ecosystems. Recently, more researchers indicated that solid organic waste is also a crucial repository of MPs and has become a vital pollution source in ecosystems. Although the occurrence and fate of MPs in solid organic waste and the interaction between MPs and biological treatments have been explored, there still needs to be comprehensive summaries. Hence, this study reviewed the occurrence and characteristics of MPs in solid organic waste and organic fertilizers. Meanwhile, this study summarized the influence of MPs on biological treatments (composting and anaerobic digestion) and their degradation characteristics. MPs are abundant in solid organic waste (0-220 ×103 particles/kg) and organic fertilizer (0-30 ×103 particles/kg), PP and PE are the prominent MPs, and fibers and fragments are the main shapes. MPs can affect the carbon and nitrogen conversion during biological treatments and interfere with microbial communities. The MP's characteristics changed after biological treatments, which should further consider their potential ecological risks. This review points out the existing problems of MPs in organic waste recycling and provides directions for their treatment in the future.

Microplastics in wastewater treatment plants: Sources, properties, removal efficiency, removal mechanisms, and interactions with pollutants

Since wastewater treatment plants (WWTPs) cannot completely remove microplastics (MPs) from wastewater, WWTPs are responsible for the release of millions of MPs into the environment even in 1 day. Therefore, knowing the sources, properties, removal efficiencies and removal mechanisms of MPs in WWTPs is of great importance for the management of MPs. In this paper, firstly the sources of MPs in WWTPs and the quantities and properties (polymer type, shape, size, and color) of MPs in influents, effluents, and sludges of WWTPs are presented. Following this, the MP removal efficiency of different treatment units (primary settling, flotation, biological treatment, secondary settling, filtration-based treatment technologies, and coagulation) in WWTPs is discussed. In the next section, details about MP removal mechanisms in critical treatment units (settling and flotation tanks, bioreactors, sand filters, membrane filters, and coagulation units) in WWTPs are given. In the last section, the mechanisms and factors that are effective in adsorbing organic-inorganic pollutants in wastewater to MPs are presented. Finally, the current situation and research gap in these areas are identified and suggestions are provided for topics that need further research in the future.

Assessment and accumulation of microplastics in sewage sludge at wastewater treatment plants located in Cádiz, Spain

Sludge from Wastewater treatment plants (WWTPs) have been determined as a sink of microplastics (MP) removed from wastewater. The aim of this research work has been to evaluate the presence of these pollutants in the sludge of seven WWTPs (five urban and two industrial), located in southern Spain. Samples were collected in the primary, secondary and digested sludge matrixes, MPs were extracted following wet peroxide oxidation and the removal of cellulose, finally the samples were analyzed according to their abundance, size (from 100 μm to 5 mm), shape, colour, and polymer type. Subsequently, the data obtained on the WWTPs were compared, the main difference among the WWTPs and different sample points showed high heterogeneity in terms of abundance of microplastics, due to the differences in the sludge loaded, the processes and the type of sludge. The results from this study established that the most abundant shape was fibers; regarding the size, 100-355 μm fraction was the most abundant, showing that the amount of MPs increased when the size decreased. Regarding the type of polymers, 23 were identified by ATR-FTIR. Further, Acrylate, PE, EAA and PP were the most abundant found polymers. The presence of MPs in the digested sludge varied from 0.02 ± 0.006 MP g DW^-1 to 57.18 ± 20.69 MP g DW^-1 in the WWTP 6 (food industry) and WWTP 3 (urban city over 212,000 inhabitants), respectively; higher abundance of MPs found in the primary sludge in respect to secondary sludge; in concordance with the removal from wastewater line reported in other studies. The results obtained showed that MPs were widely present in sludge, becoming a sink of these pollutants, estimating that among 8.05 · 10⁴ and 1.77 · 10⁹ MPs · day^-1 were loaded to sludge; therefore, these facilities act as a significant source of MPs into agriculture when sludge is used as soil amendment.

Research progress on microplastics in wastewater treatment plants: A holistic review

Wastewater treatment plants (WWTPs) discharge metric tons of microplastics (MPs) daily to aquatic and terrestrial environments worldwide. Herein we provide a holistic review on MPs in the WWTPs, highlighting recent advances in sampling and analysis, improved understanding of their sources, occurrence, and degradation in treatment steps, and the potential risks MPs pose after being discharged in treated effluent and sludge. We discuss the merits and limitations of the various sampling and analytical approaches to determine MPs in major WWTP compartments; highlight new research on MP profiles (abundance, physical characteristics, and compositions) in raw sewage, treated effluent, and waste sludge, which are of particular interest when assessing MP sources, removal rates, and fate; and emphasize mechanisms of MP fragmentation and degradation within WWTPs as well as the potential sorption of wastewater contaminants to the MPs. We find that robust and standardized methods for determining MPs in WWTP samples is still urgently needed, and that complete removal of MPs from wastewater by WWTPs is not guaranteed, although the vast majority of MPs end up in sludge. Areas of research that deserve further attention include the fate of small (<20 μm) MPs, abiotic and biotic fragmentation of MPs in the WWTPs, and more empirical data with concentrations on a mass basis.

Transport of emerging organic ultraviolet (UV) filters in ceramic membranes: Role of polyethylene (PE) microplastics

Microplastics can be considered potential carriers of emerging organic ultraviolet (UV) filters due to their considerable adsorption capacity in wastewater treatment. The adsorption behavior of organic UV filters, which are commonly contained in personal care products to preserve the skin against UV radiation, onto polyethylene (PE) microplastics were systematically studied to investigate their combined effects. Kinetics and isotherm analyses revealed that the adsorption of four organic UV filters onto PE microplastic surfaces followed a multi-rate and a heterogeneous multi-layer pattern. Several factors including salinity, microplastic size, and dosage also influenced the adsorption efficiency due to hydrophobic interactions. A bench-scale cross-flow ceramic membrane filtration experiment was investigated to evaluate the role of PE microplastics on the retention performance of organic UV filters. The retentions for organic UV filters were 34.2%-37.8% in the non-existence of PE microplastics. Conversely, organic UV filter retentions were significantly increased up to 82.2%-97.9% when they were adsorbed onto the PE microplastics, which were almost completely retained by the ceramic membrane. Therefore, organic UV filters can likely migrate and eventually be carried by PE microplastics, thus increasing the retention of both emerging organic UV filters and microplastics prior to discharge from wastewater treatment facilities.

The fate of microplastic in sludge management systems

Sewage sludge (SS) from wastewater treatment plants (WWTPs) is commonly used as a soil amendment on agricultural land; however, this sludge contains microplastics (MPs) which harm soil ecosystems and can leach into aquatic environments. This review aims to assess the fate of MPs in SS systems and, in the context of a changing agricultural scene, present alternatives for sustainable SS disposal that are consistent with the practices of a clean, circular economy. Anaerobic digestion and composting, which are commonly used to stabilize SS before land application, were not reported to substantially affect MP removal, although process efficiency and the microbiome were affected by MPs. Alternatively, MPs can be destroyed or removed by mono-incineration or combustion, but unfortunately, some MPs may remain in the ash after these processes. Therefore, the most desirable solutions would prevent MPs from entering the environment and remove them before they enter the biological part of a WWTP, where they build up in SS. Additionally, the management of MP-containing sludge must be adapted to the geographical context and the local economy, and it should begin with legislation addressing MPs in SS. The information presented here will help to develop good practices in waste management for preventing or decreasing the transfer of MPs into the environment.

Microplastics separation using stainless steel mini-hydrocyclones fabricated with additive manufacturing

Microplastics have been widely detected in natural and engineered water systems and removing microplastics from various water matrices has become a major challenge. Mini-hydrocyclones (MHCs) have been previously applied to separate mediums of different phases. Given MHCs' capability of separating fine particles from liquid phase, three MHCs were designed and fabricated in stainless steel with 3D printing. Microplastics of densities that were both lower (<1 g·cm^-3) and higher (>1 g·cm^-3) than water's density were used to test the separation efficiency in ultra-purified water. The separation test was performed on single-stage MHC as well as MHCs in series in a closed hydraulic circuit. A range of important operational parameters, including split ratio, feed pressure, feed flow rate, and solid concentration, were evaluated to optimize the separation efficiency. The single-stage MHC experiment revealed that >80 % microplastics >20 μm can be effectively removed at the concentration tested, and the separation efficiency peaked at the split ratio of 35 %. MHCs in series demonstrated their ability to further enhance the separation efficiency of the ones with the same density, as well as separate microplastics of different densities. Mini-hydrocyclones' were also used to separate microplastics in synthetic stormwater, and separation efficiency reached 84 % and 98.1 % for low-density polyethylene (LDPE) and polyamide (PA). The results indicated the MHCs' potential for large-scale application in microplastic separation for industrial and municipal wastewater.

Occurrence, analysis of microplastics in sewage sludge and their fate during composting: A literature review

Microplastics (MP) are ubiquitous contaminants and their presence in sewage sludge has recently received attention as they may enter agro-ecosystems if sludge is used as organic soil amendment. Indeed, plastic particles (<5 mm) can be transported from wastewater and sewage sludge to the soil environment either directly within the plastic matrix or indirectly as adsorbed substances. In this paper, articles from 18 countries reporting the MP quantity and their characteristics in sewage sludge from wastewater treatment plants were reviewed and the MP concentration size and type were compared. The data show that MP abundance in sewage sludge ranged globally from 7.91 to 495 × 10³ particles kg^-1 with highest abundance of fiber shape and MP size of less than 500 μm. In this review, we summarized and discussed the methods most frequently used for extraction and characterization of MP in sewage sludge including organic matter removal, MP extraction; physical and morphological MP characterization and its chemical characterization for polymer identification. We also described the major factors potentially controlling the fate of MP during disposal strategies with particular focus on composting. We show that physical and microbiological factors are important for MP degradation during composting and suggest two remediation practices: (i) inoculation of the initial sludge with microbial plastic decomposers to remove MP from contaminated sewage sludge, and (ii) development of high temperature composting processes.

Binding, recovery, and infectiousness of enveloped and non-enveloped viruses associated with plastic pollution in surface water

Microplastics in wastewater and surface water rapidly become colonised by microbial biofilm. Such 'plastisphere' communities are hypothesised to persist longer and be disseminated further in the environment and may act as a vector for human pathogens, particularly as microplastics entering wastewater treatment plants are exposed to high concentrations of pathogenic bacteria. However, the potential for human viral pathogens to become associated with the plastisphere has never before been quantified. Here, we have used rotavirus (RV) SA11 (a non-enveloped enteric virus) and the enveloped bacteriophage Phi6 as model viruses to quantify binding and recovery from biofilm-colonised microplastic pellets in three different water treatments (filtered and non-filtered surface water, and surface water with added nutrients). Viruses associated with biofilm-colonised pellets were more stable compared to those remaining in the water. While infectious particles and genome copies of RV remained stable over the 48 h sampling period, Phi6 stability was highly impacted, with a reduction ranging from 2.18 to 3.94 log₁₀. Virus particles were protected against inactivation factors when associated with the biofilm on microplastic surfaces, and when there was a high concentration of particulate matter in the liquid phase. Although our results suggest that the presence of an envelope may limit virus interaction with the plastisphere, the ability to recover both enveloped and non-enveloped infectious viruses from colonised microplastic pellets highlights an additional potential public health risk of surface waters becoming contaminated with microplastics, and subsequent human exposure to microplastics in the environment.

Emission of airborne microplastics from municipal solid waste transfer stations in downtown

With the continuous progress of urbanization, municipal solid waste (MSW) transfer stations, which are key points for garbage collection and transportation, have moved to residential areas than before. The emission characteristics of gas-phase emerging contaminants should be comprehensively assessed in the assessment of health threats to workers and environmental risks. In this study, the emission characteristics of airborne microplastic particles (>50 μm) were analyzed on the roof vent and waste reception hall of four MSW transfer stations in Shanghai during different seasons. The average concentration of airborne microplastic particles was 2.5 ± 1.3 n/m³. The particle sizes of airborne microplastics at the four waste transfer stations were mainly in the range of 100 μm to 500 μm. Microplastics mainly occur as films and fibers. The dominant microplastic type was Rayon, which accounted for 69.4% of the total amount. The rate of microplastic particles emission into the environment for a single transfer station was estimated to be in the range of 41,297 to 82,593 n/h. Compared with the waste reception hall, the concentration of airborne microplastic particles in the roof vent decreased by 25%, which indicated that the odor treatment facility effectively reduces the concentration of microplastic particles.

Long-Term Occurrence and Fate of Microplastics in WWTPs: A Case Study in Southwest Europe

Microplastic (MP) water pollution is a major problem that the world is currently facing, and wastewater treatment plants (WWTPs) represent one of the main alternatives to reduce the MP release to the environment. Several studies have analysed punctual samples taken throughout the wastewater treatment line. However, there are few long-term studies on the evolution of MPs over time in WWTPs. This work analyses the performance of a WWTP sited in Southwest Europe in relation with annual occurrence and fate of MPs. Samples were monthly taken at different points of the facility (influent, secondary effluent, final effluent, and sludge) and MPs were quantified and characterised by means of stereomicroscopy and FTIR spectrophotometry. The majority of MPs found in wastewater and sludge samples were fragments and fibres. Regarding to the chemical composition, in the water samples, polyethylene (PE), polyethylene terephthalate (PET) and polypropylene (PP) stood out, whereas, in the sludge samples, the main polymers were PET, polyamide (PA) and polystyrene (PS). The MPs more easily removed during the wastewater treatment processes were those with sizes greater than 500 µm. Results showed that the MPs removal was very high during all the period analysed with removal efficiencies between 89% and 95%, so no great variations were found between months. MP concentrations in dry sludge samples ranged between 12 and 39 MPs/g, which represented around 79% of the total MPs removed during the wastewater treatment processes. It is noticeable that a trend between temperature and MPs entrapped in sewage sludge was observed, i.e., higher temperatures entailed higher percentage of retention.

Microplastics in Sewage Sludge: A Known but Underrated Pathway in Wastewater Treatment Plants

Interest in the presence of microplastics (MPs) in wastewater has grown significantly in recent years. In fact, wastewater treatment plants (WWTPs) represent the last barrier before the discharge of MPs into an aquatic ecosystem. The research has highlighted how MPs are in part effectively removed from the waters and accumulated inside the sewage sludge (SeS) produced by the WWTP, being a cause for concern, especially in the case of agricultural reuse. This work aims to analyze the existing literature on the (i) methodical procedure for MPs analysis (thermal, spectroscopic, optical analyses), (ii) qualitative and quantitative presence of MPs in SeS, (iii) effect on sludge properties, and (iv) the possible accumulation in amended soils. Based on the results already obtained in the literature, this work aims to provide critical insights to stimulate interest in the topic and direct future research on aspects that should be deepened. In particular, it emerges that there is a clear need for standardization of the collection methods and the analytical techniques for identifying and quantifying MPs, since their physico-chemical characterization and the study on aging and on the response towards acid or basic pre-treatments are fundamental for the understanding of microplastics ecotoxicological potential.

Microplastics in Wastewater and Drinking Water Treatment Plants: Occurrence and Removal of Microfibres

Microplastics (MPs), and specifically microfibres (MPFs), are ubiquitous in water bodies, including wastewater and drinking water. In this work, a thorough literature review on the occurrence and removal of MPs, and specifically MPFs in WWTPs and DWTPs, has been carried out. When the water is treated, an average microfiber removal efficiency over 70% is achieved in WWTPs and DWTPs. These high percentages are still inefficient for avoiding the presence of a large number of microfibres in treated wastewater and also in tap water. RSF, DAF, oxidation ditch and CAS processes have been described as the most efficient treatments for eliminating MPFs from wastewater treatment. It is remarkable the wide range of the data reported on this topic; for example, treated wastewater contains between not detected and 347 MPFs/L, whereas tap water contains between not detected and 168 MPFs/L. Microfibres constitute more than half of the MPs found in treated wastewater and sewage sludge, whereas in DWTP effluents the percentage of MPFs is around 32%. Nevertheless, the relative amount of MPFs reported in tap water is notably higher (71%). Microfibres from WWTPs are discharged to the environment, being a source of MP pollution. Additionally, MPs released by DWTPs directly enter the drinking water lines, which constitute a direct route for MP human consumption, so that it has been estimated that an adult may ingest an average value of 7500 MPFs per year only via tap water. Thus, this review provides an update on the performance of WWTPs and DWTPs in removing MPs from water, which is an issue of great interest.

Sewage sludge as a source of microplastics in the environment: A review of occurrence and fate during sludge treatment

Modern wastewater treatment plants (WWTPs) effectively remove microplastics (MPs) from wastewater and unsurprisingly concentrate them in sludge. Hence through its beneficial use and disposal, sludge causes secondary release pathways of an estimated average amount of 10⁶ to 10¹⁴ wastewater-based MPs to various environmental compartments yearly. Despite these numbers, studies investigating sludge are scarce. Currently, majority of the studies in the field focus on identifying the magnitude of the problem, whereas research investigating the fate and effects of MPs during sludge treatment are very rare. This review aims to bring together and critically evaluate the limited studies conducted about MPs in the sludge treatment line and bring out the key gaps and research needs in the area. Studies conducted so far indicate that depending on the type, size, and amount of MPs, their effects during anaerobic digestion differ, with some studies demonstrating serious negative impact on biogas production. Possible effect mechanisms are also suggested such as formation of reactive oxygen species (ROS) and leaching of toxic chemicals. Moreover, a potential for sludge treatment processes (thickening, dewatering, drying, stabilization, etc.) to change the characteristics and the number of MPs, which may increase surface area available for adsorption and desorption of pollutants, was observed. Review uncovers that, in the broad universe of MPs, some highly abundant ones in sludge such as polypropylene, polyurethane, polycarbonate, and acrylic are not yet investigated in sludge treatment. Future research should focus not only to investigate the fate/effects but to fully understand the mechanisms behind these, which is missing in many studies reviewed. Besides, new studies show that effect of MPs start from the floc formation stage during biological treatment, which in fact determine the final sludge behavior in thickening and dewatering. Therefore, holistic approaches starting from wastewater till sludge exits WWTP seem necessary. Substantiating from polymer chemistry and response of plastics to stress conditions, review suggests possibilities of deterioration during sludge treatment processes. It becomes evident that some totally uninvestigated aspects such as disintegration conducted before stabilization, can change the fate of MPs during sludge treatment and may bring new perspectives to the solution of the problem.

Applications of Up-Flow Anaerobic Sludge Blanket (UASB) and Characteristics of Its Microbial Community: A Review of Bibliometric Trend and Recent Findings

The interest in research on up-flow anaerobic sludge blanket (UASB) reactors is growing. The meta-analysis of bibliometric data highlighted the growing interest in four diverse topics: (i) energy recovery production; (ii) combination with other treatments; (iii) the study of processes for the removal of specific pollutants and, (iv) characterization of microbial community and granular sludge composition. In particular, the papers published in the first 6 months of 2021 on this process were selected and critically reviewed to highlight and discuss the results, the gaps in the literature and possible ideas for future research. Although the state of research on UASB is to be considered advanced, there are still several points that will be developed in future research such as the consolidation of the results obtained on a semi-industrial or real scale, the use of real matrices instead of synthetic ones and a more in-depth study of the effect of substances such as antibiotics on the microbiota and microbiome of UASB granular biomass. To date, few and conflicting data about the environmental footprint of UASB are available and therefore other studies on this topic are strongly suggested.

Different Pathways of Microplastics Entering the Sludge Treatment System Distinctively Affect Anaerobic Sludge Fermentation Processes

Microplastics in wastewater inevitably accumulate in waste activated sludge (WAS) via wastewater biological treatment, potentially affecting the subsequent sludge treatment unit. Nevertheless, all previous research studies focused on the impacts of the direct addition of one type of model microplastics on the sludge anaerobic treatment process. This approach actually cannot reflect the real situation where multiple different microplastics simultaneously get into the wastewater treatment unit prior to the sludge treatment unit. Herein, this work innovatively proposed a more realistic method to assess the real toxic influences of microplastics on anaerobic WAS fermentation for short-chain fatty acid (SCFA) production by initially adding four typical microplastics (i.e., polyethylene terephthalate, polystyrene, and polypropylene) to the biological wastewater treatment system. Results showed that four microplastics initially entering the biological wastewater treatment reactor had little influence on the subsequent anaerobic SCFA production since WAS solubilization increased but hydrolysis and acidification decreased. In contrast, when the four microplastics were directly dosed in a WAS anaerobic fermenter, although there was no effect on WAS solubilization, the bioprocess of hydrolysis-acidification was clearly suppressed, ultimately significantly (P = 1.86 × 10-7) inhibiting the maximal SCFA production from WAS by 21.5 ± 0.1% compared to the control without microplastic addition. The excessive oxidative stress and toxic leachates from these typical microplastics reduced the relative abundances of key anaerobes (e.g., Longilinea sp.) involved in the anaerobic fermentation. This work revealed that the different pathways of microplastics entering the sludge treatment system had different impacts on anaerobic sludge fermentation processes and selecting a more realistic and accurate approach was important to evaluate the true toxicity of microplastics on the sludge anaerobic treatment system.

Treatment processes for microplastics and nanoplastics in waters: State-of-the-art review

In this work, established treatment processes for microplastics (MPs) and nanoplastics (NPs) in water as well as developed analytical techniques for evaluation of the operation of these processes were reviewed. In this regard, the strengths and limitations of different qualitative and quantitative techniques for the analysis of MPs and NPs in water treatment processes were first discussed. Afterward, the MPs and NPs treatment processes were categorized into the separation and degradation processes and the challenges and opportunities in their performance were analyzed. The evaluation of these processes revealed that the MPs or NPs removal efficiency of the separation and degradation processes could reach up to 99% and 90%, respectively. It can be concluded from this work that the combination of separation and degradation processes could be a promising approach to mineralize MPs and NPs in water with high efficiency.

Assessment of Microplastics in a Municipal Wastewater Treatment Plant with Tertiary Treatment: Removal Efficiencies and Loading per Day into the Environment

This study investigates the removal of microplastics from wastewater in an urban wastewater treatment plant located in Southeast Spain, including an oxidation ditch, rapid sand filtration, and ultraviolet disinfection. A total of 146.73 L of wastewater samples from influent and effluent were processed, following a density separation methodology, visual classification under a stereomicroscope, and FTIR analysis for polymer identification. Microplastics proved to be 72.41% of total microparticles collected, with a global removal rate of 64.26% after the tertiary treatment and within the average retention for European WWTPs. Three different shapes were identified: i.e., microfiber (79.65%), film (11.26%), and fragment (9.09%), without the identification of microbeads despite the proximity to a plastic compounding factory. Fibers were less efficiently removed (56.16%) than particulate microplastics (90.03%), suggesting that tertiary treatments clearly discriminate between forms, and reporting a daily emission of 1.6 × 107 microplastics to the environment. Year variability in microplastic burden was cushioned at the effluent, reporting a stable performance of the sewage plant. Eight different polymer families were identified, LDPE film being the most abundant form, with 10 different colors and sizes mainly between 1–2 mm. Future efforts should be dedicated to source control, plastic waste management, improvement of legislation, and specific microplastic-targeted treatment units, especially for microfiber removal.

Rivers and Wastewater-Treatment Plants as Microplastic Pathways to Eastern Mediterranean Waters: First Records for the Aegean Sea, Greece

The present work provides the first records on microplastic (MP) amounts and types in rivers and wastewater effluents entering the Aegean Sea, eastern Mediterranean. Two rivers were sampled using a manta net (mesh size, 0.33 mm): a small urban and a medium-sized river with a rural, semiurban catchment. MPs in wastewater samples were collected at two wastewater treatment plants (WWTPs) within the Athens metropolitan area after secondary treatment and from a pilot biological membrane unit (MBR), using a series of sieves. MPs in the samples were identified using stereoscopic image analysis and spectroscopic techniques. MP concentrations in the rivers were found to be variable, with as high as 27.73 items m−3 in the urban river. Differences in MP shape types, sizes, and polymer types reflect catchment size and usage. MP concentration in wastewater effluents was found to be 100 times higher in the secondary treatment (213 items m−3) than that in the pilot MBR (2.29 items m−3), with filaments and polymers indicative of synthetic textiles and household use. Further research is needed in order to accurately determine variability in MP concentrations and fluxes from these two pathways in the eastern Mediterranean Sea and elucidate the role of rivers in MP retention.

Study on the characteristics of dissolution and acid production in waste activated sludge: Focusing on the pretreatment of thermal-alkali with rhamnolipid

This paper studied the effect of thermal-alkali with rhamnolipid coupling pretreatment waste activated sludge (WAS) on the dissolution and acid production of organic matter. The results showed that when the dosage of rhamnolipid (RL) was 40 mg/g vs, the dissolution rate of soluble Chemical oxygen demand (SCOD) and soluble carbohydrate (SC) was the highest, and the concentration of soluble protein (SP), biopolymer and neutral low molecular substances was the highest. Three-dimensional fluorescence parallel factor analysis found that the addition of rhamnolipid promoted the formation of fulvic acids. When the dosage of rhamnolipid was 60 mg/g vs, the highest peak concentration of volatile fatty acids (VFAs) reached 3.5 days. The type of fermentation acid was butyric acid. The higher cracking rate and higher acid production rate showed that thermal-alkali with rhamnolipid had better acid production performance than thermal-alkali pretreatment sludge, but the amount of rhamnolipid affected the fermentation type.

Degradation of Plastics in Simulated Landfill Conditions

Different degradable plastics have been promoted as a solution for the accumulation of waste in landfills and the natural environment; in Mexico, the most popular options are oxo-degradable, which degrade in a sequential abiotic–biotic process, and compostable plastics. In this research, high-density polyethylene, oxo-degradable high-density polyethylene, and certified compostable plastic were exposed to simulated landfill conditions in an 854-day-long experiment to assess their degradation. High-density polyethylene showed limited degradation, due mainly to surface erosion, evidenced by a 13% decrease in elongation at break. The pro-oxidant additive in the oxo-degradable plastic increased this loss of mechanical properties to 27%. However, both plastic films kept their physical integrity and high molecular weight by the end of the experiment, evidencing degradation but no biodegradation. While the compostable film fragmented, had a lower molecular weight at the end of the experiment, and decreased the presence of C=O bonds, this degradation took place remarkably slower than expected from a composting process. Results show that oxo-degradable and compostable plastics will not biodegrade readily in landfills. This fact should be known and understood for decision-makers to match the characteristics of the materials to the features of the waste management systems.

Fate and effects of microplastics in wastewater treatment processes

Microplastics (MPs) have garnered growing attention of researchers, as they are proved to be hazardous to the environment and humans. Wastewater treatment plants (WWTPs) are deemed as an important releasing source of MPs to the environment, and thus it is of significance to study the behavior of MPs in WWTPs. In this review, the fate of MPs in WWTPs and their effects on different wastewater treatment processes have been comprehensively discussed. Studies have shown that the secondary treatment is the most efficient process to remove MPs from wastewaters with a removal rate around 98%. The presence of MPs can increase reagent addition dosage, inhibit nitrogen conversion rate, and cause membrane fouling in wastewater treatment processes. Besides, the influences of MPs on activated sludge mainly exert on nitrification and denitrification processes, sludge digestion, and microbial communities. However, it is worth noting that different methods have been employed to determine the concentrations of MPs in WWTPs. As a result, the removal performance on MPs in WWTPs is difficult to be accurately assessed. Moreover, complicated interaction among MPs and other environmental pollutants may expand the impacts of MPs on wastewater treatment processes, which still remains insufficiently investigated. Therefore, this review has also proposed some knowledge gaps existing in present MP studies in WWTPs, and would provide reference to alleviate the adverse effects of MPs for future research.