Photocatalytic degradation of methyl orange dye by Ti3C2-TiO2 heterojunction under solar light

Ti3C2Tx MXene-Based Hybrid Photocatalysts in Organic Dye Degradation: A Review

This review provides an overview of the fabrication methods for Ti3C2Tx MXene-based hybrid photocatalysts and evaluates their role in degrading organic dye pollutants. Ti3C2Tx MXene has emerged as a promising material for hybrid photocatalysts due to its high metallic conductivity, excellent hydrophilicity, strong molecular adsorption, and efficient charge transfer. These properties facilitate faster charge separation and minimize electron-hole recombination, leading to exceptional photodegradation performance, long-term stability, and significant attention in dye degradation applications. Ti3C2Tx MXene-based hybrid photocatalysts significantly improve dye degradation efficiency, as evidenced by higher percentage degradation and reduced degradation time compared to conventional semiconducting materials. This review also highlights computational techniques employed to assess and enhance the performance of Ti3C2Tx MXene-based hybrid photocatalysts for dye degradation. It identifies the challenges associated with Ti3C2Tx MXene-based hybrid photocatalyst research and proposes potential solutions, outlining future research directions to address these obstacles effectively.

Enhanced photocatalytic and electrochemical properties of green synthesized strontium doped titanium dioxide nanoparticles for dye removal and supercapacitor applications

The development of multifunctional nanomaterials for environmental remediation and energy storage is critical for sustainable technologies. In this study, we synthesized strontium-doped titanium dioxide (Sr-TiO2) nanoparticles (NPs) via a green method and investigated their structural, optical, and electrochemical properties to enhance photocatalytic and supercapacitive performance. Characterization results confirmed successful Sr incorporation into the TiO2 lattice. X-ray diffraction (XRD) analysis revealed a slight shift in peak positions, indicating lattice distortion due to Sr doping. Scanning electron microscopy (SEM) showed uniform, well-dispersed nanoparticles, while energy-dispersive X-ray (EDX) spectra confirmed elemental composition. UV-visible spectroscopy (UV-Vis) demonstrated a redshift in absorption, reducing the bandgap and enhancing visible-light absorption. Fourier transform infrared (FTIR) spectroscopy identified characteristic functional groups, and Brunauer-Emmett-Teller (BET) analysis indicated increased surface area, favoring photocatalytic and electrochemical activity. The photocatalytic performance of Sr-TiO2 NPs was assessed through Methylene Orange (MO) and Congo Red (Con-R) degradation under visible light at different pH levels. Under optimized conditions, Sr-TiO2 NPs achieved 94.48% MO removal in 100 min and 97.89% Con-R removal in 70 min, following pseudo-first-order kinetics, demonstrating their efficiency as visible-light-driven photocatalysts for wastewater treatment. Electrochemical studies, including cyclic voltammetry (CV), charge-discharge tests, and electrochemical impedance spectroscopy (EIS), revealed improved charge storage and lower charge transfer resistance compared to bare TiO2. The Sr-TiO2 NPs exhibited enhanced specific capacitance and good electrochemical stability, underscoring their potential as high-performance electrode materials for supercapacitors. These findings highlight a sustainable approach to environmental remediation and energy storage by leveraging Sr-doped TiO2 nanomaterials for dual-functional applications.

Engineering Ag-Modified BiOCl as an Efficient and Effective Catalyst for Solar Light-Driven Organic Pollutant Degradation and Hydrogen Production

The direct conversion of solar energy into clean fuels has emerged as an effective approach for future energy production and addressing environmental challenges. This research focuses on the synthesis of BiOCl using a straightforward hydrothermal method with Ag modification achieved through green synthesis. These materials were applied to enhance photocatalytic processes and hydrogen (H2) evolution. Comprehensive characterization of the synthesized photocatalysts was performed by using techniques, such as XRD, SEM, BET, XPS, and UV-vis spectroscopy. The Ag/BiOCl composite demonstrated impressive photocatalytic performance, achieving degradation rates of 96% for RhB, 87.7% for TC, and 85% for HQ under 18 min of solar irradiation. Additionally, a high mineralization rate of 92% was observed through Total Organic Carbon (TOC) analysis. Furthermore, the Ag/BiOCl composite exhibited a significant H2 evolution rate of 565 μmol g-1 h-1, which is nearly double that of pure BiOCl. The interaction between Ag and BiOCl was found to enhance the generation of O2- radicals, as confirmed by radical trapping experiments, with the underlying mechanism elucidated using LC-HRMS. The nanoparticles also demonstrated excellent degradation of industrial waste, highlighting the potential of Ag/BiOCl for use in the purification and sterilization of industrial effluents.

Recent advances of MXene@MOF composites for catalytic water splitting and wastewater treatment approaches

MXenes are a group of 2D material which have been derived from the layered transition metal nitrides and carbides and have the characteristics like electrical conductivity, high surface area and variable surface chemical composition. Self-assembly of clusters/metal ions and organic linkers forms metal organic framework (MOF). Their advantages of ultrahigh porosity, highly exposed active sites and many pore architectures have garnered them a lot of attention. But poor conductivity and instability plague several conventional MOF. To address the issue, MOF can be linked with MXenes that have rich surface functional groups and excellent electrical conductivity. In this review, different etching methods for exfoliation of MXene along with the synthesis methods of MXene/MOF composites are reviewed, including hydrothermal method, solvothermal method, in-situ growth method, and self-assembly method. Moreover, application of these MXene/MOF composites for catalytic water splitting and wastewater treatment were also discussed in details. In addition to increasing a single MOF conductivity and stability, MXenes can add a variety of new features, such the template effect. Due to these benefits, MXene/MOF composites can be effectively used in several applications, including photocatalytic/electrocatalytic water splitting, adsorption and degradation of pollutants from wastewater. Finally, the authors explored the current challenges and the future opportunities to improve the efficiency of MXene/MOF composites.

N-doped Ti3C2-reinforced porous g-C3N4 for photocatalytic contaminants degradation and nitrogen reduction

Herein, a series of N-doped Ti3C2/porous g-C3N4 composites are ultrasonically prepared from N-doped Ti3C2 and porous g-C3N4 under N2 atmosphere. The structure, morphology, and optical characteristics of the as-prepared composites are characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectroscopy, etc. Moreover, photocatalytic measurements show that N-doped Ti3C2 is an excellent modifier for porous g-C3N4 to heighten its photocatalytic activity. Only 44.1% of rhodamine B can be degraded by the photocatalysis of pristine porous g-C3N4, while the photocatalytic degradation ratio of rhodamine B can reach up to 97.5% for the optimal N-doped Ti3C2 loading composites under visible light for 15 min. Moreover, the photocatalytic tests of N2 fixation confirm that the optimal composites show the highest production yield of NH4+ (11.8 μmol gcat-1 h-1), which is 2.11-folds more than that of porous g-C3N4 (5.6 μmol gcat-1 h-1). The reinforced photocatalytic properties are revealed to profit from the more photogenerated electrons and holes' separation, higher ability for light response, and more abundant active sites. This work develops the route for boosting the photocatalytic properties of porous g-C3N4 with N-doped Ti3C2.

Laser-Treated MXene as an Electrochemical Agent to Boost Properties of Semitransparent Photoelectrode Based on Titania Nanotubes

In this study, Ti3C2Tx underwent laser treatment to reshape it, resulting in the formation of a TiO2/Ti3C2Tx heterojunction. The interaction with laser light induced the formation of spherical TiO2 composed of an anatase-rutile phase on the Ti3C2Tx surface. Such a heterostructure was loaded over a titania nanotube (TNT) layer, and the surface area was enhanced through immersion in a TiCl4 solution followed by thermal treatment. Consequently, the photon-to-electron conversion efficiency exhibits a 10-fold increase as compared to bare TNT. Moreover, for the sample produced with optimized conditions, five times higher photoactivity is observed in comparison to bare TNT. It was shown that under visible light irradiation the most photoactive heterojunction based on the tubular layer reveals a substantial drop in the charge transfer resistance of about 32% with respect to the dark condition. This can be attributed to the narrower band gaps of the modified material and improvement of the separation efficiency of the photogenerated electron-hole pairs. Overall results suggest that this investigation underscores TiO2/Ti3C2Tx as a promising noble-metal-free material that enhances both the electrochemical and photoelectrochemical performances of electrode materials based on TNT that can be further used in light-harvesting applications.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

TiO2nanorod arrays/Ti3C2TxMXene nanosheet composites with efficient photocatalytic activity

Semiconductor photocatalysis holds significant promise in addressing both environmental and energy challenges. However, a major hurdle in photocatalytic processes remains the efficient separation of photoinduced charge carriers. In this study, TiO2nanorod arrays were employed by glancing angle deposition technique, onto which Ti3C2TxMXene was deposited through a spin-coating process. This hybrid approach aims to amplify the photocatalytic efficacy of TiO2nanorod arrays. Through photocurrent efficiency characterization testing, an optimal loading of TiO2/Ti3C2Txcomposites is identified. Remarkably, this composite exhibits a 40% increase in photocurrent density in comparison to pristine TiO2. This enhancement is attributed to the exceptional electrical conductivity and expansive specific surface area inherent to Ti3C2TxMXene. These attributes facilitate swift transport of photoinduced electrons, consequently refining the separation and migration of electron-hole pairs. The synergistic TiO2/Ti3C2Txcomposite showcases its potential across various domains including photoelectrochemical water splitting and diverse photocatalytic devices. As such, this composite material stands as a novel and promising entity for advancing photocatalytic applications. This study can offer an innovative approach for designing simple and efficient photocatalytic materials composed of MXene co-catalysts and TiO2for efficient water electrolysis on semiconductors.

Enhanced degradation of Congo-red dye by Cr3+ doped α-Fe2O3 nano-particles under sunlight and industrial wastewater treatment

Considering the increasing amount of water pollution, nanocomposite advances for the effective elimination of hazardous pollutants are still needed. α-Fe2O3, Cr0·5Fe1·5O3 and CrFeO3 nanoparticles were synthesized via an eco-friendly material synthesis i. e hydrothermal route without using any precipitating agent and were studied to remove congo-red dye using photocatalytic properties. X-ray diffraction (XRD), Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FESEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) characterizations have been performed to know about the material structure and properties of synthesized samples. High efficiency (95.2%) of degradation was achieved under sunlight using a very low amount of CrFeO3 catalyst (0.2 g/L) at a 6-pH level of dye and was confirmed using UV spectroscopy, TOC (84%), LC-HRMS. Also, the potential to degrade the CR dye was concluded from the high rate of BOD5/COD. The results showed a significant enhancement in the degradation of α-Fe2O3 from 52.3% to 95.2% in a short duration of 15 min by introducing chromium as a dopant. The doping of chromium influenced the major factors responsible for the photocatalytic activity such as the increase in range of absorbance, increased e--h+ pair separation, improvement in the charge transfer process and active site formation which significantly enhanced the process of degradation. We found that the Cr-doped α-Fe2O3 nanomaterial could effectively remove dyes, such as congo-red, from industrial water-waste.

Recent developments and perspectives of MXene-Based heterostructures in photocatalysis

Energy crises and environmental degradation are serious in recent years. Inexhaustible solar energy can be used for photocatalytic hydrogen production or CO2 reduction to reduce CO2 emissions. At present, the development of efficient photocatalysts is imminent. MXene as new two-dimensional (2D) layered material, has been used in various fields in recent years. Based on its high conductivity, adjustable band gap structure and sizable specific surface area, the MXene is beneficial to hasten the separation and reduce the combination of photoelectron-hole pairs in photocatalysis. Nevertheless, the re-stacking of layers because of the strong van der Waals force and hydrogen bonding interactions seriously hinder the development of MXene material as photocatalysts. By contrast, the MXene-based heterostructures composed of MXene nanosheets and other materials not only effectively suppress the re-stacking of layers, but also show the superior synergistic effects in photocatalysis. Herein, the recent progress of the MXene-based heterostructures as photocatalysts in energy and environment fields is summarized in this review. Particularly, new synthetic strategies, morphologies, structures, and mechanisms of MXene-based heterostructures are highlighted in hydrogen production, CO2 reduction, and pollutant degradation. In addition, the structure-activity relationship between the synthesis strategy, components, morphology and structure of MXene-based heterostructures, and their photocatalytic properties are elaborated in detail. Finally, a summary and the perspectives on improving the application study of the heterostructures in photocatalysis are presented.

Multinary nanocomposite of GO@SrO@CoCrO3@FeCr2O4@SnO2@SiO2 for superior electrochemical performance and water purification applications

Novel multinary nanocomposite using solvothermal method synthesized and studied for their use in supercapacitors and photocatalysis to degrade pollutants using characterization techniques XRD, SEM, EDX, FTIR, Raman, UV-Vis, Zeta potential and photoluminescence spectroscopy whereas electrochemical testing via EIS, CV and GCD analysis. Average crystalline size of 20.81 nm measured from XRD whereas EDX confirms GO suppression within nanocomposite. Mixed matrix like morphology is observable from SEM micrographs. The composite exhibited a band gap of 2.78 eV that could degrade MB dye at 94 % under direct sunlight consistent with first-order kinetics. Multiple distinctive peaks in FTIR spectra indicates various functional groups exsistence in the material alongwith zeta potential value of -17.9 mV. Raman spectra reveals D-band shifting to value 1361 cm-1 while the G-band shifts to 1598 cm-1 relative to GO. Furthermore electrochemical performance evaluated revealing electron transfer rate value 4.88 × 10-9 cms-1 with maximum capacitance about 7182 Fg-1 at a scan rate of 10 mVs-1 respectively. Power density ranges from 3591.18 to 2163 W/kg and energy density from 299 to 120 Wh/Kg as measured from GCD analysis. These findings indicates that novel multinary nanocomposite holds potential as an electrode material in supercapacitors and as a sunlight-driven photocatalyst for the degradation of water-borne organic pollutants.

Boosted Photocatalytic Performance for Antibiotics Removal with Ag/PW12/TiO2 Composite: Degradation Pathways and Toxicity Assessment

Photocatalyst is the core of photocatalysis and directly determines photocatalytic performance. However, low quantum efficiency and low utilization of solar energy are important technical problems in the application of photocatalysis. In this work, a series of polyoxometalates (POMs) [H3PW12O40] (PW12)-doped titanium dioxide (TiO2) nanofibers modified with various amount of silver (Ag) nanoparticles (NPs) were prepared by utilizing electrospinning/photoreduction strategy, and were labelled as x wt% Ag/PW12/TiO2 (abbr. x% Ag/PT, x = 5, 10, and 15, respectively). The as-prepared materials were characterized with a series of techniques and exhibited remarkable catalytic activities for visible-light degradation tetracycline (TC), enrofloxacin (ENR), and methyl orange (MO). Particularly, the 10% Ag/PT catalyst with a specific surface area of 155.09 m2/g and an average aperture of 4.61 nm possessed the optimal photodegradation performance, with efficiencies reaching 78.19% for TC, 93.65% for ENR, and 99.29% for MO, which were significantly higher than those of PW12-free Ag/TiO2 and PT nanofibers. Additionally, various parameters (the pH of the solution, catalyst usage, and TC concentration) influencing the degradation process were investigated in detail. The optimal conditions are as follows: catalyst usage: 20 mg; TC: 20 mL of 20 ppm; pH = 7. Furthermore, the photodegradation intermediates and pathways were demonstrated by HPLC-MS measurement. We also investigated the toxicity of products generated during TC removal by employing quantitative structure-activity relationship (QSAR) prediction through a toxicity estimation software tool (T.E.S.T. Version 5.1.2.). The mechanism study showed that the doping of PW12 and the modification of Ag NPs on TiO2 broadened the visible-light absorption, accelerating the effective separation of photogenerated carriers, therefore resulting in an enhanced photocatalytic performance. The research provided some new thoughts for exploiting efficient and durable photocatalysts for environmental remediation.

Recent advancements in MXene-based nanocomposites as photocatalysts for hazardous pollutant degradation - A review

The recent expeditious industrialization and urbanization showcase the increasing need for renewable and non-renewable energy and the severe environmental crisis. In this regard, numerous 2-dimensional (2D) nanomaterials have been developed as a facile approach to meet the futuristic energy essentials and to resolve the crisis. In contrast, the newly explored 2D MXenes (transition metal carbide/nitrides/carbonitride) have been employed as an intriguing material for various environmental applications. This development is accredited to their unique properties, which include a vast surface area, strong electrical conductivity, fascinating photophysical properties, high mechanical properties, stability in an aqueous medium, high hydrophilicity, biocompatibility, ease of functionalization, and excellent thermal properties. MXenes act as a potential candidate in water desalination, energy storage devices such as electrodes of Li-ion batteries and pseudo capacitors, hydrogen production, sensors, and wastewater treatment. This review article deliberates the synthesis of MXene and nanocomposites of MXene and their photo-catalytic actions against various toxic pollutants such as organic dyes and heavy metals in wastewater. This review also precises the various preparation methods of MXene-based photocatalyst and the enhanced photocatalytic activity of MXene and MXene-based nanocomposites in wastewater treatment. Also, it details the attempts made to improve the photocatalytic activity of MXene-based nanocomposites in terms of their structural compositions. In addition, the merits and demerits of the MXene-based photocatalysts are deliberated, which may pave the way for future research in this arena.

Photocatalytic Activity of the Oxidation Stabilized Ti3 C2 Tx MXene in Decomposing Methylene Blue, Bromocresol Green and Commercial Textile Dye

Two-dimensional MXenes are excellent photocatalysts. However, their low oxidation stability makes controlling photocatalytic processes challenging. For the first time, this work elucidates the influence of the oxidation stabilization of model 2D Ti3 C2 Tx MXene on its optical and photocatalytic properties. The delaminated MXene is synthesized via two well-established approaches: hydrofluoric acid/tetramethylammonium hydroxide (TMAOH-MXene) and minimum intensive layer delamination with hydrochloric acid/lithium fluoride (MILD-MXene) and then stabilized by L-ascorbic acid. Both MXenes at a minimal concentration of 32 mg L-1 show almost 100% effectiveness in the 180-min photocatalytic decomposition of 25 mg L-1 model methylene blue and bromocresol green dyes. Industrial viability is achieved by decomposing a commercial textile dye having 100 times higher concentration than that of model dyes. In such conditions, MILD-MXene is the most efficient due to less wide optical band gap than TMAOH-MXene. The MILD-MXene required only few seconds of UV light, simulated white light, or 500 nm (cyan) light irradiation to fully decompose the dye. The photocatalytic mechanism of action is associated with the interplay between surface dye adsorption and the reactive oxygen species generated by MXene under light irradiation. Importantly, both MXenes are successfully reused and retained approximately 70% of their activity.

Synthesis of AgBr/Ti3C2@TiO2 ternary composite for photocatalytic dehydrogenation of 1,4-dihydropyridine and photocatalytic degradation of tetracycline hydrochloride

In this work, AgBr/Ti₃C₂@TiO₂ ternary composite photocatalyst was prepared by a solvothermal and precipitation method with the aims of introducing Ti₃C₂ as a cocatalyst and TiO₂ as a compositing semiconductor. The crystal structure, morphology, elemental state, functional groups and photoelectrochemical properties were studied by XRD, SEM, TEM, XPS, FI-IR and EIS. The photocatalytic performances of the composites were investigated by the photodehydrogenation of diethyl 1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate (1,4-DHP) and the photodegradation of tetracycline hydrochloride (TCH) under visible light irradiation (λ > 400 nm). The AgBr/Ti₃C₂@TiO₂ composite photocatalyst showed enhanced photocatalytic performance in both photocatalytic reactions. The photocatalytic activity of the composite photocatalyst is dependent on the proportional content of Ti₃C₂@TiO₂. With optimized Ti₃C₂@TiO₂ proportion, the photocatalytic ability of the AgBr/Ti₃C₂@TiO₂ composite was 24.5 times as high as that of Ti₃C₂@TiO₂ for photodehydrogenation of 1,4-DHP and 1.9 times as high as that of pure AgBr for photodegradation of TCH. The enhanced photocatalytic performance of the AgBr/Ti₃C₂@TiO₂ composite should be due to the formation of a p-n heterojunction structure between AgBr and Ti₃C₂@TiO₂ and the excellent electronic properties of Ti₃C₂, which enhanced the visible light absorption capacity, lowered the internal resistance, speeded up the charge transfer and reduced the recombination efficiency of photo-generated carriers. Mechanism studies showed that superoxide free radical (˙O₂^-) was the main active species. In addition, the composite photocatalyst also displayed good stability, indicating its reutilization in practical application.

Improving the Photocatalytic Activity of Ti3C2 MXene by Surface Modification of N Doped

Methyl orange dye (MO) is one of the azo dyes, which is not only difficult to degrade but also hazardous to human health, therefore, it is necessary to develop an efficient photocatalyst to degrade MO. In this paper, a facile and low-cost elemental doping method was used for the surface modification of Ti₃C₂ MXene, i.e., nitrogen-doped titanium carbide was used as the nitrogen source, and the strategy of combining solvent heat treatment with non-in situ nitrogen doping was used to prepare N-Ti₃C₂ MXene two-dimensional nanomaterials with high catalytic activity. It was found that the catalytic efficiency of N-Ti₃C₂ MXene materials was enhanced and improved compared to the non-doped Ti₃C₂ MXene. In particular, N-Ti₃C₂ 1:8 MXene showed the best photo-catalytic ability, as demonstrated by the fact that the N-Ti₃C₂ 1:8 MXene material successfully degraded 98.73% of MO (20 mg/L) under UV lamp irradiation for 20 min, and its catalytic efficiency was about ten times that of Ti₃C₂ MXene, and the N-Ti₃C₂ photo-catalyst still showed good stability after four cycles. This work shows a simplified method for solvent heat-treating non-in situ nitrogen-doped Ti₃C₂ MXene, and also elaborates on the photo-catalytic mechanism of N-Ti₃C₂ MXene, showing that the high photo-catalytic effect of N-Ti₃C₂ MXene is due to the synergistic effect of its efficient charge transfer and surface-rich moieties. Therefore, N-Ti₃C₂ MXene has a good prospect as a photo-catalyst in the photocatalytic degradation of organic pollutants.

Deciphering the Superior Electronic Transmission Induced by the Li-N Ligand Pairs Boosted Photocatalytic Hydrogen Evolution

Atomic level decoration route is designated as one of the attractive methods to regulate both the charge density and band structure of photocatalysts. Moreover, to enable more efficient separation and transport of photocarriers, the construction of novel active sites can enhance both the reactivity and electrical conductivity of the crystal. Herein, an Li-N ligand is constructed via co-doping lithium and nitrogen atoms into ZnIn₂ S₄ lattice, which achieves a promoted photocatalytic H₂ evolution at 9737 µmol g^-1 h^-1 . The existence of Li-N ligand pairs and the behaviors of photocarriers on L₄₀ N₅ ZIS are determined systematically, which also provides a unique insight into the mechanism of the improved photocarrier migration rate. With the introduction of Li-N dual sites, the vacancy form of ZnIn₂ S₄ has changed and the photocatalytic stability is significantly improved. Interestingly, the change of charge density around Li-N ligand in ZnIn₂ S₄ is determined by theoretical simulations, as well as the regulated energy barrier of photocatalytic water splitting caused by Li-N dual sites, which act as both adsorption site for H₂ O and stronger reactive sites. This work helps to extend the understanding of ZnIn₂ S₄ and offers a fresh perspective for the creation of a Li-N co-doped photocatalyst.

New insights into MXene applications for sustainable environmental remediation

Multiple ecological contaminants in gaseous, liquid, and solid forms are vented into ecosystems due to the huge growth of industrialization, which is today at the forefront of worldwide attention. High-efficiency removal of these environmental pollutants is a must because of the potential harm to public health and biodiversity. The alarming concern has led to the synthesis of improved nanomaterials for removing pollutants. A path to innovative methods for identifying and preventing several obnoxious, hazardous contaminants from entering the environment is grabbing attention. Various applications in diverse industries are seen as a potential directions for researchers. MXene is a new, excellent, and advanced material that has received greater importance related to the environmental application. Due to its unique physicochemical and mechanical properties, high specific surface area, physiological compatibility, strong electrodynamics, and raised specific surface area wettability, its applications are growing. This review paper examines the most recent methods and trends for environmental pollutant removal using advanced 2D Mxene materials. In addition, the history and the development of MXene synthesis were elaborated. Furthermore, an extreme summary of various environmental pollutants removal has been discussed, and the future challenges along with their future perspectives have been illustrated.

Application Prospects of MXenes Materials Modifications for Sensors

The first two-dimensional (2D) substance sparked a boom in research since this type of material showed potential promise for applications in field sensors. A class of 2D transition metal nitrides, carbides, and carbonitrides are referred to as MXenes. Following the 2011 synthesis of Ti3C2 from Ti3AlC2, much research has been published. Since these materials have several advantages over conventional 2D materials, they have been extensively researched, synthesized, and studied by many research organizations. To give readers a general understanding of these well-liked materials, this review examines the structures of MXenes, discusses various synthesis procedures, and analyzes physicochemistry properties, particularly optical, electronic, structural, and mechanical properties. The focus of this review is the analysis of modern advancements in the development of MXene-based sensors, including electrochemical sensors, gas sensors, biosensors, optical sensors, and wearable sensors. Finally, the opportunities and challenges for further study on the creation of MXenes-based sensors are discussed.

Nitrogen-Doped TiO2/Nitrogen-Containing Biochar Composite Catalyst as a Photocatalytic Material for the Decontamination of Aqueous Organic Pollutants

In this study, a waste walnut shell-derived biochar enriched with nitrogen (N-biochar) is mixed with nitrogen-doped TiO₂ (N-TiO₂) to fulfill an affordable composite material for the degradation of methyl orange (MO). Results showed that porous structure and oxygen-containing functional groups of biochar facilitate contact with MO during the reaction process. Meanwhile, doped nitrogen has a positive effect on improving the reaction activity due to the existence of a substituted state and a gap state in the catalyst. It was revealed that the N-TiO₂/N-biochar (NCNT0.2/1) exhibited better photocatalytic degradation efficiency (97.6%) and mineralization rate (85.4%) of MO than that of TiO₂, N-TiO₂, and TiO₂/N-biochar due to its stronger synergistic effect of N, TiO₂, and biochar, in accordance with its high charge separation by photoluminescence (PL) analysis. Trapping experiments showed that ·OH is the predominant active species during the decolorization and mineralization process of MO. After five repeated use, the loss of activity of the catalyst was negligible. In addition, the catalytic degradation process was consistent with the pseudo-first-order kinetic model with the rate constant of 4.02 × 10^-2 min^-1.

Rapid growth of MXene-based membranes for sustainable environmental pollution remediation

Water consumption has grown in recent years due to rising urbanization and industry. As a result, global water stocks are steadily depleting. As a result, it is critical to seek strategies for removing harmful elements from wastewater once it has been cleaned. In recent years, many studies have been conducted to develop new materials and innovative pathways for water purification and environmental remediation. Due to low energy consumption, low operating cost, and integrated facilities, membrane separation has gained significant attention as a potential technique for water treatment. In these directions, MXene which is the advanced 2D material has been explored and many applications were reported. However, research on MXene-based membranes is still in its early stages and reported applications are scatter. This review provides a broad overview of MXenes and their perspectives, including their synthesis, surface chemistry, interlayer tuning, membrane construction, and uses for water purification. Application of MXene based membrane for extracting pollutants such as heavy metals, organic contaminants, and radionuclides from the aqueous water bodies were briefly discussed. Furthermore, the performance of MXene-based separation membranes is compared to that of other nano-based membranes, and outcomes are very promising. In order to shed more light on the advancement of MXene-based membranes and their operational separation applications, significant advances in the fabrication of MXene-based membranes is also encapsulated. Finally, future prospects of MXene-based materials for diverse applications were discussed.

Recent advances and perspectives of emerging two-dimensional transition metal carbide/nitride-based materials for organic pollutant photocatalysis

This review outlines the fabrication strategies, morphological structures, electronic properties and applications of MXene based materials for photocatalysis in the treatment of recalcitrant organic pollutants (dyes, phenols, antibiotics and pharmaceuticals).

Advances in 2D MXenes-based materials for water purification and disinfection: Synthesis approaches and photocatalytic mechanistic pathways

MXenes two-dimensional materials have recently excited researchers' curiosity for various industrial applications. MXenes are promising materials for environmental remediation technologies to sense and mitigate various intractable hazardous pollutants from the atmosphere due to their inherent mechanical and physicochemical properties, such as high surface area, increased hydrophilicity, high conductivity, changing band gaps, and robust electrochemistry. This review discusses the versatile applications of MXenes and MXene-based nanocomposites in various environmental remediation processes. A brief description of synthetic procedures of MXenes nanocomposites and their different properties are highlighted. Afterward, the photocatalytic abilities of MXene-based nanocomposites for degrading organic pollutants, removal of heavy metals, and inactivation of microorganisms are discussed. In addition, the role of MXenes anti-corrosion support in the lifetime of some semiconductors was addressed. Current challenges and future perspectives toward the application of MXene materials for environmental remediation and energy production are summarized for plausible real-world use.

Preparation and Photodegradation Properties of Carbon-Nanofiber-Based Catalysts

In this study, an iron oxide/carbon nanofibers (Fe2O3/CNFs) composite was prepared by a combination of electrospinning and hydrothermal methods. The characterization of Fe2O3/CNFs was achieved via scanning electron microscopy (SEM), infrared spectroscopy (IR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). It is shown that when the hydrothermal reaction time was 180 °C and the reaction time was 1 h, the Fe2O3 nanoparticle size was about 90 nm with uniform distribution. The photodegradation performance applied to decolorize methyl orange (MO) was investigated by forming a heterogeneous Fenton catalytic system with hydrogen peroxide. The reaction conditions for the degradation of MO were optimized with the decolorization rate up to more than 99% within 1 h, which can decompose the dyes in water effectively. The degradation process of MO by Fenton oxidation was analyzed by a UV-visible NIR spectrophotometer, and the reaction mechanism was speculated as well.

Development of novel K0.8Ni0.4Ti1.6O4 nano bamboo leaves, microstructural characterization, double absorption, and photocatalytic removal of organic pollutant

Novel K_0.8Ni_0.4Ti_1.6O₄ (KNTO) nano bamboo leaves were prepared for the first time under a simple hydrothermal method with 3 M KOH at 320 °C over 80 min. Highly pure KNTO possessing layered structure was determined by X-ray diffraction (XRD) and high-resolution transmission electron microscope (HRTEM). Double absorption feature of KNTO semiconductor was revealed at band energies of 1.88 and 2.08 eV by the UV-vis diffuse reflectance spectra and confirmed by the photoluminescence (PL) spectra. The photocatalytic activity was explored by the photodegradation of MB organic dye. KNTO not only exhibits strong adsorptive ability on methylene blue (MB) in dark environment, but also possesses good photodegradation capability of 94% degradation in 60 min. Degradation mechanism revealed that the photogenerated holes play an essential role in the MB degradation process, which is confirmed by trapping experiments. The recycling experiments demonstrated very high recycling ability and durability of KNTO nano bamboo leaves, suggesting KNTO is a potential candidate for high efficiency organic pollutant removal in the wastewater treatment.

Fabrications of hybrid Polyurethane-Pd doped ZrO2 smart carriers for self-healing high corrosion protective coatings

The work demonstrates the effective utilization of hybrid Polyurethane - palladium doped zirconium oxide (Pd-ZrO₂) as innovative carriers for corrosion protection coatings on steel materials. ZrO₂ and Pd-ZrO₂ nanoparticles were successfully synthesized using Photodeposition followed by the hydrothermal synthesis method. The synthesized nanoparticles were then incorporated into the polyurethane matrix and characterized using Fourier-transform infrared spectroscopy and scanning electron microscopy (SEM). The FTIR and SEM confirm the presence of ZrO₂ and Pd-ZrO₂ nanoparticles and their morphologies in polyurethane composites material. The thermogravimetric analysis (TGA) results indicated that the polyurethane matrix remained stable up to 250 °C. At 800 °C, >50% of residues are observed for Pd-ZrO₂ - polyurethane in the TGA analysis, which confirms that the primer and nanoparticles addition enhances the thermal stability of the composite. The water contact angle measurement explains the hydrophobic behavior of nanocomposite modified coatings on a mild steel substrate. It indicates that Pd-ZrO₂ and primer significantly increase the hydrophobicity of polyurethane. The major advantages of developing water-repellent or hydrophobic surfaces open up a world of possibilities for metals and alloys in terms of corrosion prevention. Electrochemical impedance spectroscopy (EIS) and a salt spray test were used to determine the anti-corrosion behavior of the prepared polymer nanocomposites. The polymer nanocomposite coatings have better anti-corrosive capabilities when compared to pure polyurethane. The corrosion protection efficiency increased from 76.63% to 97.57% upon incorporating 2 wt % of Pd-ZrO₂ in the polyurethane matrix. The results confirmed that the modifications on the polyurethane enhanced the hydrophobicity and anti-corrosion properties of the polymer nanocomposite coatings.

Advances in preparation, mechanism and applications of various carbon materials in environmental applications: A review

Carbon-related materials are now widely investigated in a various industrial field due to their excellent and unique qualities. It must be tailored to the application in such a way that it fits the application. At the same time, it needs to be generated in sufficient quantities for commercial use, and the synthesis method is the major sticking point here. Because most new materials are discovered by chance, the synthesis process described here may not be the most effective way to create them. The research is merely a steppingstone to discovering a different approach, and it will continue until the substance is no longer being used. If you're developing materials for any purpose, synthesis processes are essential. Fullerene, carbon nanotubes (CNT), graphene, and MXene are only a few of the carbon-based compounds discussed in this overview study, which also gives a brief prognosis on the materials future. Furthermore, the environmental application of these carbon materials was discussed and commented.

Construction of Bronze TiO2/Ti3C2 MXene/Ag3PO4 Ternary Composite Photocatalyst toward High Photocatalytic Performance

Research has demonstrated that the formation of composites of titanium dioxide (TiO2) with silver phosphate (Ag3PO4) through the construction of heterojunctions can expand its light absorption range and suppress the recombination of photogenerated electron–hole pairs, thereby improving the photocatalytic performance. However, this method offers only limited performance improvements, and the composite photocatalysts are costly due to the expensive Ag3PO4. In this study, Ti3C2 MXene, which has good hydrophilicity and excellent electrical conductivity, is first used to form Schottky junction composites with bronze TiO2 (TiO2(B)) via electrostatic self-assembly. Then, Ag3PO4 quantum dots were further formed on the surface of the TiO2(B)/Ti3C2 MXene by in situ self-growth, and Ag3PO4 formed heterojunctions and Schottky junctions with TiO2(B) and Ti3C2 MXene, respectively. Finally, a ternary composite photocatalyst TiO2(B)/Ti3C2 MXene/Ag3PO4 was jointly constructed by these functional junctions. Under the synergistic effect of these functional junctions, the mobility and fast separation performance of photogenerated electron–hole pairs of the composite photocatalyst were significantly improved, the recombination of photogenerated electron–hole pairs was effectively suppressed, and the light absorption performance was enhanced. As a result, the composite photocatalyst exhibited excellent photocatalytic performances.

Preparation of TiO2-CNT-Ag Ternary Composite Film with Enhanced Photocatalytic Activity via Plasma-Enhanced Chemical Vapor Deposition

In this study, a TiO2-CNT-Ag ternary composite film was successfully synthesized using the plasma-enhanced chemical vapor deposition method by simultaneously feeding a carbon nanotube (CNT)/Ag suspension and titanium tetraisopropoxide gas. The prepared TiO2-CNT-Ag film was characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and ultraviolet-visible spectroscopy. Moreover, the Ag/Ti ratio of the film was confirmed using an inductivity-coupled plasma optical emission spectrometer. The performance of the TiO2-composite film for the degradation of rhodamine 6G under simulated solar light irradiation was evaluated. The rate constant of the prepared TiO2-CNT-Ag for rhodamine 6G degradation was approximately 1.8 times greater than that of prepared TiO2. This result indicates that the addition of CNT and Ag significantly improved the photocatalytic activity of the prepared films.

Dual Stimuli-Responsive Multifunctional Silicon Nanocarriers for Specifically Targeting Mitochondria in Human Cancer Cells

Specific targeting, selective stimuli-responsiveness, and controlled release of anticancer agents are requested for high therapeutic efficiency with a minimal adverse effect. Herein, we report the sophisticated synthesis and functionalization of fluorescent mesoporous silicon (FMPSi) nanoparticles decorated with graphene oxide (GO) nanosheets. GO-wrapped FMPSi (FMPSi@GO) was loaded with a cisplatin (Cis) anticancer agent, and Cis-loaded FMPSi@GO (FMPSi-Cis@GO) exhibited the dual stimuli (pH and NIR)-responsiveness of controlled drug release, i.e., the drug release rate was distinctly enhanced at acidic pH 5.5 than at neutral pH 7.0 and further enhanced under NIR irradiation at acidic pH condition. Notably, dequalinium-conjugated FMPSi-Cis@GO (FMPSi-Cis@GO@DQA) demonstrated an excellent specificity for mitochondrial targeting in cancer cells without noticeable toxicity to normal human cells. Our novel silicon nanocarriers demonstrated not only stimuli (pH and NIR)-responsive controlled drug release, but also selective accumulation in the mitochondria of cancer cells and destroying them.

Emerging architecture titanium carbide (Ti3C2Tx) MXene based photocatalyst toward degradation of hazardous pollutants: Recent progress and perspectives

MXenes family has aroused marvelous consideration as a frontier photoactive candidate for solar energy transformation and environmental remediation. 2D Ti₃C₂ exhibit a unique layered microstructure, large surface functional groups (-F, -OH, -O), substantial sorption selectivity, superior reduction efficiency, and electrical conductivity. Electronically conductive Ti₃C₂T_x with tunable energy band gap (0.92-1.75eV) makes it one of the most potential photoactive materials for photodegradation. The present review paper aims to design cost-effective heterojunctions and Schottky junctions of Ti₃C₂ with transition metal oxides, sulfides, g-C₃N₄, and other organic frameworks. The discussion mainly involves different aspects related to its tunable electronic structure, stability problems, and surface morphology control. In addition, the advantages of Ti₃C₂ in fabricating highly efficient Ti₃C₂ based catalytic junctions exhibiting suppressed charge carrier recombination are discussed with particular emphasis on their adsorption and redox properties for the removal of toxic dyes, heavy metal ions, and various pharmaceuticals. Finally, current challenges and research directions are outlined and prospected for the future development of Ti₃C₂ based photocatalytic systems.

MXenes as emerging nanomaterials in water purification and environmental remediation

Environmental pollution has accelerated and intensified because of the acceleration of industrialization, therefore fabricating excellent materials to remove hazardous pollutants has become inevitable. MXenes as emerging transition metal nitrides, carbides or carbonitrides with high conductivity, hydrophilicity, excellent structural stability, and versatile surface chemistry, become ideal candidates for water purification and environmental remediation. Particularly, MXenes reveal excellent sorption capability and efficient reduction performance for various contaminants of wastewater. In this regard, a comprehensive understanding of the removal behaviors of MXene-based nanomaterials is necessary to explain how they remove various pollutants in water. The eliminate process of MXene-based nanomaterials is collectively influenced by the physicochemical properties of the materials themselves and the chemical properties of different contaminants. Therefore, in this review paper, the synthesis strategies and properties of MXene-based nanomaterials are briefly introduced. Then, the chemical properties, removal behaviors and interaction mechanisms of heavy metal ions, radionuclides, and organic pollutants by MXene-based nanomaterials are highlighted. The overview also emphasizes associated toxicity, secondary contamination, the challenges, and prospects of the MXene-based nanomaterials in the applications of water treatment. This review can supply valuable ideas for fabricating versatile MXene nanomaterials in eliminating water pollution.

Experimental and computational investigation of a green Knoevenagel condensation catalyzed by zeolitic imidazolate framework-8

ZIF-8 is a highly porous, stable, and abundant surface area material that can be used as an environmentally friendly catalyst for Knoevenagel condensations. The effects of the ratio of the reactants (benzaldehyde (BA):ethyl cyanoacetate (ECA)), reaction temperature, and catalyst concentration were systematically investigated using a ZIF-8 catalyst and water as the solvent. ZIF-8 (3-5 wt%) showed excellent catalytic performance with an almost complete conversion of BA in less than 6 h with a BA:ECA molar ratio of 1:2 at different temperatures. At 60 °C, the BA conversion rate and product selectivity of the reaction reached their highest values after 4 h with a BA:ECA molar ratio of 1:1. When employing 5.0 wt% ZIF-8, almost complete BA conversion was achieved after 3 h at room temperature. ZIF-8 also demonstrated good recyclability with almost no change in its catalytic activity over five cycles. The proposed reaction mechanism is based on the catalytic activity of the basic N sites on the surface of ZIF-8, and is supported by density functional theory calculations. The present approach provides a promising strategy for the construction of simple and environmentally friendly ZIF-8 catalysts.

Fe2.5Co0.3Zn0.2O4/CuCr-LDH as a visible-light-responsive photocatalyst for the degradation of caffeine, bisphenol A, and simazine in pure water and real wastewater under photo-Fenton-like degradation process

This paper outlines the synthesis and application of a sustainable composite for the photo-Fenton-like degradation of caffeine, bisphenol A, and simazine. The phase, morphology, optical and magnetic properties of the samples were evaluated by different characterization techniques. The composite of Fe_2.5Co_0.3Zn_0.2O₄ and copper-chromium layered double hydroxide (CuCr-LDH) was determined to be the most favorable photocatalyst in the photo-Fenton-like process when compared with Fe₃O₄, Fe_2.5Co_0.3Zn_0.2O₄, CuCr-LDH, and Fe₃O₄/CuCr-LDH composite. Studying the efficiency of the photo-Fenton-like degradation process in the presence of the Fe_2.5Co_0.3Zn_0.2O₄/CuCr-LDH composite revealed a degradation rate constant of caffeine twice more than the sum of those obtained for the individual processes. This ascribes to the synergistic effect by which the photo-generated electron-hole from the catalyst and the efficient reduction of Fe³⁺, Cu²⁺, etc. during the photo-Fenton-like reaction is accelerated. Moreover, under the optimal condition and after 120 min of heterogenous photo-Fenton-like process at natural pH, > 90% of pollutants mixture was decomposed. The experiments fulfilled in near-real conditions demonstrated I) the high stability and magnetically recoverability of the photocatalyst and II) the proper degradation performance of the applied heterogenous photo-Fenton-process in the removal of pollutant mixture in different water bodies and in the presence of chloride and bicarbonate ions.

MXenes based nano-heterojunctions and composites for advanced photocatalytic environmental detoxification and energy conversion: A review

Extensive research is being done to develop multifunctional advanced new materials for high performance photocatalytic applications in the field of energy production and environmental detoxification, MXenes have emerged as promising materials for enhancing photocatalytic performance owing to their excellent mechanical properties, appropriate Fermi levels, and adjustability of chemical composition. Numerous experimental and theoretical research works implied that the dimensions of MXenes have a significant impact on their performance. For photocatalysis to thrive in the future, we must understand the current state of the art for MXene in different dimensions. Using MXene co-catalysts in widely used in photocatalytic applications such as CO2 reduction, hydrogen production and organic pollutant oxidation, this study focuses on the most recent developments in MXenes based materials, structural modifications, innovations in reaction and material engineering. It has been reported that using 5 mg of CdS-MoS2-MXene researchers were able to generate as high as 9679 μmol/g/h hydrogen under visible light. The MXenes based heterojunction photocatalyst Co3O4/MXene was utilized to degrade 95% bisphenol A micro-pollutant in just 7 min. Numerous novel materials, their preparations and performances have been discussed. Depending upon the nature of MXene-based materials, the synthesis techniques and photocatalytic mechanism of MXenes as co-catalyst are also summarized. Finally, some final thoughts and prospects for developing highly efficient MXene-based photocatalysts are provided which will indeed motivate researchers to design novel hybrid materials based on MXenes for sustainable solutions to energy and pollution issues.

Flexible and high-sensitivity sensor based on Ti3C2-MoS2 MXene composite for the detection of toxic gases

It is vital to have high sensitivity in gas sensors to allow the exact detection of dangerous gases in the air and at room temperature. In this study, we used 2D MXenes and MoS₂ materials to create a Ti₃C₂-MoS₂ composite with high metallic conductivity and a wholly functionalized surface for a significant signal. At room temperature, the Ti₃C₂-MoS₂ composite demonstrated clear signals, cyclic response curves to NO₂ gas, and gas concentration-dependent. The sensitivities of the standard Ti₃C₂-MoS₂ (TM_2) composite (20 wt% MoS₂) rose dramatically to 35.8%, 63.4%, and 72.5% when increasing NO₂ concentrations to 10 ppm, 50 ppm, and 100 ppm, respectively. In addition, the composite showed reaction signals to additional hazardous gases, such as ammonia and methane. Our findings suggest that highly functionalized metallic sensing channels could be used to construct multigas-detecting sensors that are very sensitive in air and at room temperature.

Biosynthesis, characterization, and evaluation of antibacterial and photocatalytic methylene blue dye degradation activities of silver nanoparticles from Streptomyces tuirus strain

Silver nanoparticles (AgNPs) are a promising technology for the design of antimicrobial agents against drug-resistant pathogens. It could also be used for the photocatalytic degradation of dyes used in industries such as methylene blue (MB). In this study, 17 different actinomycetal strains isolated from hydrocarbon-contaminated soils collected from an oil distribution company in Algeria were evaluated for their ability to produce NPs. After a selection process, S16 was the main strain capable of synthesizing AgNPs extracellularly. The strain S16 was determined using molecular identification based on the sequencing of the 16S rDNA gene. Among various techniques used for the synthesis of AgNPS, a technique using a temperature of 30 °C, pH of 7, a metal salt concentration of 1 mM, and a period of 72 h in the dark were found to be more effective in the biosynthesis of the AgNPs. The biosynthesized AgNPs that were analyzed by UV-visible spectroscopy resulted in a specific peak at a wavelength of (λ = 400 nm). The DRX analyses showed characteristic peaks of the AgNPs at (1 1 1), (2 0 0), (2 2 2), and (3 1 1), which validated the presence and crystalline nature of the biosynthesized NPs. Zetasizer analysis showed an average size and zeta potential of 64 nm (-32.3 mV), while the SEM-EDS analysis confirmed the spherical shape of AgNPs and the presence of Ag atoms in the elemental composition. The biosynthesized AgNPs indicated adequate antibacterial activity against 5 out of the 6 strains tested in this study, using minimum inhibitory concentration (MIC) that ranged from 217.18 μg/mL to 1137.5 μg/mL. The AgNPs were combined with commercial antibiotics and the synergistic effect of the combination was also assessed against MRSA which resulted in increased antibacterial activity of AgNPs in the presence of the strain S16. Furthermore, the photocatalytic degradation of the methylene blue (MB) was evaluated under sunlight and UV irradiations using biosynthesized AgNPs. The AgNPs showed photocatalytic decolorization potential of 71.3% for MB dye (20 ppm) under sunlight irradiation within 6 h of incubation, while only 11.25% of the MB dye degraded using UV irradiation.

Fabrication of a high-efficiency CdS@TiO2@C/Ti3C2 composite photocatalyst for the degradation of TC-HCl under visible light

CdS@TiO2@C/Ti3C2 composites derived from Ti3C2 MXene exhibit outstanding photodegradation ability for TC-HCl under visible light irradiation.

Facile single-step synthesis of MXene@CNTs hybrid nanocomposite by CVD method to remove hazardous pollutants

In the present work, facile preparation of MXenes based nanocomposite (MXene-CNTs) through catalytic chemical vapor deposition (cCVD) was demonstrated. The novel design of two and one-dimensional (2D/1D) MXene-CNTs composites for an extraordinary photocatalytic process for removal of Rhodamine B (RhB) using efficient photocatalytic dye degradations was compared to the performance of pure MXene. The surface morphological behavior of MAX, MXene and MXene-CNTs rational design of surface microstructure CNTs anchored on 2D materials MXene nanosheets product was characterized employing scanning electron microscopy (SEM). As-prepared direct growth CNTs by employing CVD method were in the size ranges of 40-90 nm as revealed from SEM images. The crystallographic structures of etching and delaminations of MAX and MXene-CNTs were observed for CNTs diffracted peaks at 2θ = 25.11° in support of (002) plan. The major C-O and (CC) stretching were confirmed. Prepared MXene and MXene-CNTs samples photocatalytic performance was investigated through photocatalytic Rhodamine B (RhB) dye degradation. MXene-based CNTs hybrid nanocomposites photocatalysts activity were estimated. The as-prepared pure MXene-RhB and MXene-CNTs-RhB materials calculated efficiency were 60 % and 75 %, respectively. The CVD preparations of new MXene-CNTs synthesis yield high and explored good successive cycles for hazardous pollutants.