Anthracene removal potential of green synthesized titanium dioxide nanoparticles (TiO2-NPs) and Alcaligenes faecalis HP8 from contaminated soil

Unlocking the potential of titanium dioxide nanoparticles: an insight into green synthesis, optimizations, characterizations, and multifunctional applications

This comprehensive review explores the emergence of titanium dioxide nanoparticles (TiO2-NPs) as versatile nanomaterials, particularly exploring their biogenic synthesis methods through different biological entities such as plants, bacteria, fungi, viruses, and algae. These biological entities provide eco-friendly, cost-effective, biocompatible, and rapid methods for TiO2-NP synthesis to overcome the disadvantages of traditional approaches. TiO2-NPs have distinctive properties, including high surface area, stability, UV protection, and photocatalytic activity, which enable diverse applications. Through detailed analysis, this review demonstrates significant applications of green fabricated TiO2-NPs in biomedicine, explicitly highlighting their antimicrobial, anticancer, and antioxidant activities, along with applications in targeted drug delivery, photodynamic therapy, and theragnostic cancer treatment. Additionally, the review underscores their pivotal significance in biosensors, bioimaging, and agricultural applications such as nanopesticides and nanofertilizers. Also, this review proves valuable incorporation of TiO2-NPs in the treatment of contaminated soil and water with various environmental contaminants such as dyes, heavy metals, radionuclides, agricultural effluents, and pathogens. These comprehensive findings establish the foundation for future innovations in nanotechnology, underscoring the importance of further investigating bio-based synthetic approaches and bioactivity mechanisms to enhance their efficacy and safety across healthcare, agricultural, and environmental applications.

Characterization and degradation mechanism of a newly isolated hydrolyzed polyacrylamide-degrading bacterium Alcaligenes faecalis EPDB-5 from the oilfield sludge

Hydrolyzed polyacrylamide (HPAM) is posing serious threats to ecosystems. However, biodegradation is an effective method to remove HPAM owing to its low cost and environmental friendliness. In this study, Alcaligenes faecalis EPDB-5 was isolated as a highly efficient HPAM degrading strain from sludge contaminated with polymerized produced water from Daqing oilfield. Under the optimal conditions, the strain EPDB-5 demonstrated an impressive HPAM degradation rate of 86.05%, the total nitrogen (TN) removal of 71.96% and chemical oxygen demand (COD) removal of 67.98%. Meanwhile, it can maintain a stable degradation rate higher than 75% under different pH and temperature conditions. 27 genes that play a key role in HPAM degradation were annotated by metagenomics sequencing. The key genes were involved in multiple KEGG pathways, including biofilm formation, biosynthesis secondary metabolites, and metabolic pathways. SEM, GPC, and FTIR analyses revealed that the structure of HPAM after biodegradation showed pores, a significant decrease in molecular weight, -NH2 detachment, and carbon chain breakage. Particularly, we propose a possible mechanism of biofilm formation - HPAM degradation - biofilm disappearance and reorganization. Moreover, the degradation rate of strain EPDB-5 on real wastewater containing HPAM was 29.97% in only three days. This work expands our knowledge boundary about the HPAM degradation mechanism at the functional gene level, and supports the potential of strain EPDB-5 as a novel auxiliary microbial resource for the practical application of HPAM.

Nano-enabled microalgae bioremediation: Advances in sustainable pollutant removal and value-addition

Microalgae-assisted bioremediation, enriched by nanomaterial integration, offers a sustainable approach to environmental pollution mitigation while harnessing microalgae's potential as a biocatalyst and biorefinery resource. This strategy explores the interaction between microalgae, nanomaterials, and bioremediation, advancing sustainability objectives. The potent combination of microalgae and nanomaterials highlights the biorefinery's promise in effective pollutant removal and valuable algal byproduct production. Various nanomaterials, including metallic nanoparticles and semiconductor quantum dots, are reviewed for their roles in inorganic and organic pollutant removal and enhancement of microalgae growth. Limited studies have been conducted to establish nanomaterial's (CeO2, ZnO, Fe3O4, Al2O3, etc.) role on microalgae in pollution remediation; most studies cover inorganic pollutants (heavy metals and nutrients) remediation, exhibited 50-300% bioremediation efficiency improvement; however, some studies cover antibiotics and toxic dyes removal efficiency with 19-95% improvement. These aspects unveil the complex mechanisms underlying nanomaterial-pollutant-microalgae interactions, focusing on adsorption, photocatalysis, and quantum dot properties. Strategies to enhance bioremediation efficiency are discussed, including pollutant uptake improvement, real-time control, tailored nanomaterial design, and nutrient recovery. The review assesses recent advancements, navigates challenges, and envisions a sustainable future for bioremediation, underlining the transformative capacity of nanomaterial-driven microalgae-assisted bioremediation. This work aligns with Sustainable Development Goals 6 (Clean Water and Sanitation) and 12 (Responsible Consumption and Production) by exploring nanomaterial-enhanced microalgae bioremediation for sustainable pollution management and resource utilization.

Biologically active metabolites of Alcaligenes faecalis: diversity, statistical optimization, and future perspectives

Alcaligenes faecalis is a Gram-negative, rod-shaped bacterium that is common in the environment and has been reported to have various bioactive metabolites of industrial potential applications, including antifungal, antibacterial, antimycobacterial, antiparasitic, anticancer, antioxidant activities. In this review, we highlighted and discussed the respective metabolites, pointing out their chemical diversities, purification, current challenges, and future directions. A. faecalis has an industrial role in biodegradation, biosurfactants, and different enzyme production. In this review, the up-to-date various Response Surface Methodology methods (RSM) that can be employed for statistical optimization of the bioactive secondary metabolites have been discussed and highlighted, pointing out the optimal use of each method, current challenges, and future directions.

Nanomaterial-mediated strategies for enhancing bioremediation of polycyclic aromatic hydrocarbons: A systematic review

Polycyclic aromatic hydrocarbons (PAHs) are pervasive organic pollutants in the environment that are formed as an outcome of partial combustion of organic matter. PAHs pose a significant threat to ecological systems and human health due to their cytotoxic and genotoxic effects. Therefore, an immediate need for effective PAH remediation methods is crucial. Although nanomaterials are effective for remediation of PAHs, concerns regarding environmental compatibility and sustainability remains. Therefore, this study emphasizes integration of nanomaterials with bioremediation methods, which might offer a more sustainable and ecofriendly approach to PAHs remediation. A systematic search was conducted through scholarly databases from 2013 to 2023. A total of 360 articles were scrutinized, among which 26 articles were selected that resonated with the application of nano-bioremediation. These literatures comprise both comparative analysis of bioremediation only as well as nano-bioremediation. There is an elevation of 18.9 % in PAHs removal of liquid-phase samples, when comparing bioremediation (52.2 %) with nano-bioremediation (71.1 %). A consistent trend was observed in soil samples, with bioremediation and nano-bioremediation that successfully remove PAHs, with 60.8 % and 75.1 % respectively, indicating a 14.3 % improvement. Furthermore, the review elaborated on the various features of nanomaterials that led to their efficiency in the bioremediation of PAH. The review also discussed the strategies of nano-bioremediation namely nanomaterial-assisted microbial degradation, nanomaterial-assisted enzyme-enhanced microbial activity, nanomaterial-immobilized microbial cells, nanomaterial-facilitated electron transfer, and even some eco-green approaches to remediate PAHs, like biogenic nanomaterial for PAHs.

Exploring the insights of bioslurry-Nanoparticle amalgam for soil amelioration

In response to global agricultural challenges, this review examines the synergistic impact of bioslurry and biogenic nanoparticles on soil amelioration. Bioslurry, rich in N, P, K and beneficial microorganisms, combined with zinc oxide nanoparticles synthesized through eco-friendly methods, demonstrates remarkable soil improvement capabilities. Their synergistic effects include enhanced nutrient availability through increased soil enzymatic activities, improved soil structure via stable aggregate formation, stimulated microbial activity particularly beneficial groups, enhanced water retention due to increased organic matter and modified soil surface properties and reduced soil pH fluctuations. These mechanisms significantly impact soil physico-chemical properties including cation exchange capacity, electrical conductivity and nutrient dynamics. This review analyses these effects and their implications for sustainable agricultural practices, focusing on crop yield improvements, reduced chemical fertilizer dependence and enhanced plant stress tolerance. Knowledge gaps such as long-term nanoparticle accumulation effects and impacts on non-target organisms are identified. Future research directions include optimizing bioslurry-nanoparticle ratios for various soil types and developing "smart" nanoparticle-enabled biofertilizers with controlled release properties. This innovative approach contributes to environmentally friendly farming practices, potentially enhancing global food security and supporting sustainable agriculture transitions. The integration of bioslurry and biogenic nanoparticles presents a promising solution to soil degradation and agricultural sustainability challenges.

Green titanium dioxide (TiO2) nanoparticles assisted biodegradation of anthracene employing Serratia quinivorans HP5

The anthracene biodegradation potential of Serratia quinivorans HP5 was studied under a controlled laboratory environment. The green TiO2 nanoparticles (NPs) synthesized from Paenibacillus sp. HD1PAH was used to accelerate the biodegradation process. The synergistic application of TiO2 NPs and S. quinivorans HP5 resulted in a reduction of anthracene concentration by 1.2 folds in liquid-medium and 1.5 folds in contaminated soil. Gas-chromatography and mass-spectrometric investigation showed the production of four anthracene derivatives, namely 1,2-anthracene dihydrodiol, 6,7-benzocoumarin, anthrone, and 9,10-anthraquinoneat the termination of experimental periods. Furthermore, bacterial biomass increased by 23.3 folds in the presence of TiO2 NPs, and overall soil enzyme activities were enhanced by 4.2 folds in the treated samples. In addition, there was a negative correlation observed between the biomass of S. quinivorans HP5 and the concentrations of anthracene, suggesting the involvement of bacterium in anthracene biodegradation processes. The degradation pathway of anthracene revealed its transformation into the less toxic compound 9,10-anthraquinone. Overall, this study elucidates a novel biodegradation pathway for anthracene and highlights the potential of nano-assisted bacterial remediation as a promising approach for environmental cleanup.

Investigation of antimicrobial and anti-cancer activity of thermally sensitive SnO2 nanostructures with green-synthesized cauliflower morphology at ambient weather conditions

A tin oxide (SnO2) nanostructure was prepared using Matricaria recutita leaf extract to investigate its anticancer activity against SK-MEL-28 cells. The tetragonal crystal structure of tin oxide nanoparticles with an average crystal size of 27 nm was confirmed by X-ray diffraction (XRD) analysis. The tetragonal crystal structure of the tin oxide nanoparticles, with an average crystallite size of 27 nm, was confirmed by XRD an absorbance peak at 365 nm was identified by UV-visible spectroscopy analysis as belonging to the bio-mediated synthesis of SnO2 nanoparticles. The SnO2 NPs are capped and stabilized with diverse functional groups derived from bioactive molecules, including aldehydes, benzene rings, amines, alcohols, and carbonyl stretch protein molecules. Fourier transform infrared spectroscopy (FTIR) analysis validated the presence of these capping and stabilizing chemical bonds. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies revealed the cauliflower-shaped morphology of the SnO2 nanoparticles with an average particle size of 28 nm. The antimicrobial activity of both prepared and encapsulated samples confirmed their biological activities. Furthermore, both prepared and encapsulated tin oxide samples exhibited excellent anticancer activity against SK-MEL-28 human cancer cells. The present study introduces a reliable and uncomplicated approach to produce SnO2 nanoparticles and demonstrates their effectiveness in various applications, including cancer therapy, drug administration, and disinfectant.

Synthesis and characterization of titanium dioxide nanoparticles from Bacillus subtilis MTCC 8322 and its application for the removal of methylene blue and orange G dyes under UV light and visible light

Over the last decade there has been a huge increase in the green synthesis of nanoparticles. Moreover, there is a continuous increase in harnessing the potential of microorganisms for the development of efficient and biocompatible nanoparticles around the globe. In the present research work, investigators have synthesized TiO2 NPs by harnessing the potential of Bacillus subtilis MTCC 8322 (Gram-positive) bacteria. The formation and confirmation of the TiO2 NPs synthesized by bacteria were carried out by using UV-Vis spectroscopy, Fourier transforms infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDX/EDS). The size of the synthesized TiO2 NPs was 80-120 nm which was spherical to irregular in shape as revealed by SEM. FTIR showed the characteristic bands of Ti-O in the range of 400-550 cm-1 and 924 cm-1 while the band at 2930 cm-1 confirmed the association of bacterial biomolecules with the synthesized TiO2 NPs. XRD showed two major peaks; 27.5° (rutile phase) and 45.6° (anatase phase) for the synthesized TiO2 NPs. Finally, the potential of the synthesized TiO2 NPs was assessed as an antibacterial agent and photocatalyst. The remediation of Methylene blue (MB) and Orange G (OG) dyes was carried out under UV- light and visible light for a contact time of 150-240 min respectively. The removal efficiency for 100 ppm MB dye was 25.75% and for OG dye was 72.24% under UV light, while in visible light, the maximum removal percentage for MB and OG dye was 98.85% and 80.43% respectively at 90 min. Moreover, a kinetic study and adsorption isotherm study were carried out for the removal of both dyes, where the pseudo-first-order for MB dye is 263.269 and 475554.176 mg/g for OG dye. The pseudo-second-order kinetics for MB and OG dye were 188.679 and 1666.667 mg/g respectively. In addition to this, the antibacterial activity of TiO2 NPs was assessed against Bacillus subtilis MTCC 8322 (Gram-positive) and Escherichia coli MTCC 8933 (Gram-negative) where the maximum zone of inhibition in Bacillus subtilis MTCC 8322 was about 12 mm, and for E. coli 16 mm.

In vitro analyses of cerium oxide nanoparticles in degrading anthracene/fluorene and revealing the antibiofilm activity against bacteria and fungi

A sol-gel method was used to synthesize the cerium dioxide nanoparticles. The nanoparticles formed were then characterized with UV-visible spectrophotometry, Fourier Transform Infrared Spectrophotometer (FTIR), SEM-EDAX, XRD, and Dynamic Light Scattering (DLS). The UV-visible absorbance at 282 nm and characteristic peak at 600-4000 cm-1 provided insight into the formation of cerium dioxide nanoparticles using a chemical method. SEM analysis and EDAX analysis confirmed nanoparticle formation and elements within the nanoparticles based on their irregular morphology. The hydrodynamic size obtained from the DLS analysis was 178.4 nm and the polydispersity was 0.275 nm. Furthermore, XRD results confirmed the crystalline nature of cerium dioxide nanoparticles. Using batch adsorption as a method, the effect of concentration of Polycyclic Aromatic Hydrocarbons (PAH), adsorbent concentration, pH, and irradiation source was investigated. Under UV light conditions, 10 μg/mL cerium dioxide nanoparticle at pH 5 degraded 2 μg/mL of PAH (anthracene and fluorene). Consequently, the synthesized cerium dioxide nanoparticles were effective photocatalysts. For anthracene and fluorene, kinetic studies showed the degradation process followed pseudo-second-order kinetics and Freundlich isotherms. Cerium oxide also exhibited significant antimicrobial and antibiofilm activity against bacteria and fungi. As a result, the cerium dioxide nanoparticle has proved to be a highly effective photocatalytic tool for the degradation of PAHs and exhibits strong antimicrobial activity.

Microbial synthesis of titanium dioxide nanoparticles and their importance in wastewater treatment and antimicrobial activities: a review

Nanotechnology (NT) and nanoparticles (NPs) have left a huge impact on every field of science today, but they have shown tremendous importance in the fields of cosmetics and environmental cleanup. NPs with photocatalytic effects have shown positive responses in wastewater treatment, cosmetics, and the biomedical field. The chemically synthesized TiO2 nanoparticles (TiO2 NPs) utilize hazardous chemicals to obtain the desired-shaped TiO2. So, microbial-based synthesis of TiO2 NPs has gained popularity due to its eco-friendly nature, biocompatibility, etc. Being NPs, TiO2 NPs have a high surface area-to-volume ratio in addition to their photocatalytic degradation nature. In the present review, the authors have emphasized the microbial (algae, bacterial, fungi, and virus-mediated) synthesis of TiO2 NPs. Furthermore, authors have exhibited the importance of TiO2 NPs in the food sector, automobile, aerospace, medical, and environmental cleanup.

Reduction of hydrocarbon pollutants by hyacinth plants ( Eichhornia crassipes)

Background: The application of phytoremediation by utilizing plants has been used to control oil pollution in waters. One of the plants that can act as a phytoremediator is the hyacinth because this plant can reduce various pollutants including petroleum hydrocarbons. This study aims to study the reduction ability of petroleum hydrocarbons at different concentrations including improving water quality. Methods: This study consisted of one treatment (petroleum hydrocarbon) consisting of five factors with three replicates. The treatments consisted of 10 ppm (E1), 30 ppm (E2), 50 ppm (E3), 70 ppm (E4), 90 ppm (E5), and (E0) without aquatic plants as controls. The treatments were observed daily and measured from the first day (D-1), the seventh day (D-7), and the 14 th day (D-14). The water quality in each treatment was also measured, such as water temperature, pH, and dissolved oxygen. Results: The results showed that the hyacinth plant was able to reduce hydrocarbon in terms of total petroleum hydrocarbon (TPH) by 79% while it was only between 17-27% naturally without the hyacinth. The reduction of TPH in the water was in line with the decrease of chlorophyll in the leaves of hyacinths, and it was followed by the increase of dissolved oxygen in the water media. Conclusions: In conclusion, hyacinths can reduce petroleum hydrocarbons and they can improve the water quality as well.