Optical Projection and Spatial Separation of Spin-Entangled Triplet Pairs from the S1 (21 Ag–) State of Pi-Conjugated Systems

Direct Colorimetric Temperature Measurement Ahead of Flame Zone with Polydiacetylenes

Measurement of temperature and heat transfer ahead of spreading fire is essential to developing our understanding of the mechanisms involved in fire spread and explosions. Because the temperature gradients in spreading fires are often steep and occur on short spatial and time scales, these measurements are notoriously difficult. Current techniques such as thermocouples require painstakingly careful engineering to ensure accurate results. Other approaches such as thermal cameras and Schlieren imaging require expensive, complex optical setups that are expensive, not amenable to widespread deployment, and require specialized expertise to deploy. Polydiacetylenes (PDAs), a class of color-changing polymers, were developed into dynamic temperature sensors, enabling the direct measurement of temperature gradients ahead of a spreading fire. Diacetylene (DA) precursors (polymerized to form PDAs) were synthesized to undergo visible color changes in response to well-defined temperatures ranging from ≈50 to 200 °C. PDAs were coated on flammable substrates, and their responsiveness was demonstrated with the combustion of paper, cardboard, and nitrocellulose. PDAs were found to be able to directly track temperature gradients ahead of the combustion zone with sub-millimeter and microsecond resolution. The developed sensors were demonstrated to have broad applicability due to their ease of deployment, simple readout, and low cost. Dynamic PDA sensors are particularly applicable to situations demanding high spatial and temporal resolutions, such as deflagrations (fast) or backing fires (short-range temperature gradients).

Singlet fission in heterogeneous lycopene aggregates

We have prepared lycopene aggregates with low scattering in an acetone-water suspension. The aggregates exhibit highly distorted absorption, extending from the UV up to 568 nm, as a result of strong excitonic interactions. We have investigated the structural organization of these aggregates by resonance Raman and TEM, revealing that the lycopene aggregates are not homogeneous, containing at least four different aggregate species. Transient absorption measurements upon excitation at 355, 515, and 570 nm, to sub-select these different species, reveal significant differences in dynamics between each of the aggregate types. The strong excitonic interactions produce extremely distorted transient electronic signatures, which do not allow an unequivocal identification of the excited states at times shorter than 60 ps. However, these experiments demonstrate that all the lycopene aggregated species form long-living triplets via singlet fission.

Perylene-derivative singlet exciton fission in water solution

We provide direct evidence of singlet fission occurring with water-soluble compounds. We show that perylene-3,4,9,10-tetracarboxylate forms dynamic dimers in aqueous solution, with lifetimes long enough to allow intermolecular processes such as singlet fission. As these are transient dimers rather than stable aggregates, they retain a significant degree of disorder. We performed a comprehensive analysis of such dynamic assemblies using time-resolved absorption and fluorescence spectroscopy, nuclear magnetic resonance spectroscopy, and theoretical modelling, allowing us to observe the characteristic signatures of singlet fission and develop a model to characterize the different species observed. Our findings reveal that structure fluctuations within perylene-3,4,9,10-tetracarboxylate associations are key in favoring either singlet fission or charge separation. The efficiency of triplet formation is higher than 100%, and the disordered system leads to triplets living in the nanosecond time range.

Recent Advance in the Development of Singlet-Fission-Capable Polymeric Materials

Singlet fission (SF) is a spin-allowed process in which a higher-energy singlet exciton is converted into two lower-energy triplet excitons via a triplet pair intermediate state. Implementing SF in photovoltaic devices holds the potential to exceed the Shockley-Queisser limit of conventional single-junction solar cells. Although great progress has been made in exploiting the underlying mechanism of SF over the past decades, the scope of materials capable of SF, particularly polymeric materials, remains poor. SF-capable polymer is one of the most potential candidates in the implementation of SF into devices due to their distinct superiorities in flexibility, solution processability and self-assembly behavior. Notably, recent advancements have demonstrated high-performance SF in isolated donor-acceptor (D-A) copolymer chains. This review provides an overview of recent progress in the development of SF-capable polymeric materials, with a significant focus on elucidating the mechanisms of SF in polymers and optimizing the design strategies for SF-capable polymers. Additionally, the paper discusses the challenges encountered in this field and presents future perspectives. It is expected that this comprehensive review will offer valuable insights into the design of novel SF-capable polymeric materials, further advancing the potential for SF implementation in photovoltaic devices.

Relaxation dynamics of high-energy excited states of carotenoids studied by UV excitation and pump-repump-probe transient absorption spectroscopy

The excited states of carotenoids have been a subject of numerous studies. While a majority of these reports target the excited state dynamics initiated by the excitation of the S2 state, the upper excited state(s) absorbing in the UV spectral region (denoted as SUV) has been only scarcely studied. Moreover, the relation between the SUV and Sn, the final state of the well-known S1-Sn transition of carotenoids, remains unknown. To address this yet-unresolved issue, we compared the excited state dynamics of two carotenoids, namely, β-carotene and astaxanthin, after excitation of either the SUV or Sn state. The SUV state was excited directly by UV light, and the excitation of the Sn state was achieved via re-pumping the S1-Sn transition. The results indicated that direct SUV excitation produces an S1-Sn band that is significantly broader than that obtained after S2 excitation, most probably due to the generation of multiple S1 conformations produced by excess energy. No such broadening is observed if the Sn state is excited by the re-pump pulse. This shows that the Sn and SUV states are different, each initializing a specific relaxation pathway. We propose that the Sn state retains the coupled triplet pair character of the S1 state, while the SUV state is the higher state of Bu+ symmetry accessible by one-photon transition.

Twisted Carotenoids Do Not Support Efficient Intramolecular Singlet Fission in the Orange Carotenoid Protein

Singlet exciton fission is the spin-allowed generation of two triplet electronic excited states from a singlet state. Intramolecular singlet fission has been suggested to occur on individual carotenoid molecules within protein complexes provided that the conjugated backbone is twisted out of plane. However, this hypothesis has been forwarded only in protein complexes containing multiple carotenoids and bacteriochlorophylls in close contact. To test the hypothesis on twisted carotenoids in a "minimal" one-carotenoid system, we study the orange carotenoid protein (OCP). OCP exists in two forms: in its orange form (OCPo), the single bound carotenoid is twisted, whereas in its red form (OCPr), the carotenoid is planar. To enable room-temperature spectroscopy on canthaxanthin-binding OCPo and OCPr without laser-induced photoconversion, we trap them in a trehalose glass. Using transient absorption spectroscopy, we show that there is no evidence of long-lived triplet generation through intramolecular singlet fission despite the canthaxanthin twist in OCPo.

Synthesis and Characterizations of 5,5'-Bibenzo[rst]pentaphene with Axial Chirality and Symmetry-Breaking Charge Transfer

Exploration of novel biaryls consisting of two polycyclic aromatic hydrocarbon (PAH) units can be an important strategy toward further developments of organic materials with unique properties. In this study, 5,5'-bibenzo[rst]pentaphene (BBPP) with two benzo[rst]pentaphene (BPP) units is synthesized in an efficient and versatile approach, and its structure is unambiguously elucidated by X-ray crystallography. BBPP exhibits axial chirality, and the (M)- and (P)-enantiomers are resolved by chiral high-performance liquid chromatography and studied by circular dichroism spectroscopy. These enantiomers have a relatively high isomerization barrier of 43.6 kcal mol^-1 calculated by density functional theory. The monomer BPP and dimer BBPP are characterized by UV-vis absorption and fluorescence spectroscopy, cyclic voltammetry, and femtosecond transient absorption spectroscopy. The results indicate that both BPP and BBPP fluoresce from a formally dark S₁ electronic state that is enabled by Herzberg-Teller intensity borrowing from a neighboring bright S₂ state. While BPP exhibits a relatively low photoluminescence quantum yield (PLQY), BBPP exhibits a significantly enhanced PLQY due to a greater S₂ intensity borrowing. Moreover, symmetry-breaking charge transfer in BBPP is demonstrated by spectroscopic investigations in solvents of different polarity. This suggests high potential for singlet fission in such π-extended biaryls through appropriate molecular design.

Dynamics of Excitons in Conjugated Molecules and Organic Semiconductor Systems

The exciton, an excited electron-hole pair bound by Coulomb attraction, plays a key role in photophysics of organic molecules and drives practically important phenomena such as photoinduced mechanical motions of a molecule, photochemical conversions, energy transfer, generation of free charge carriers, etc. Its behavior in extended π-conjugated molecules and disordered organic films is very different and very rich compared with exciton behavior in inorganic semiconductor crystals. Due to the high degree of variability of organic systems themselves, the exciton not only exerts changes on molecules that carry it but undergoes its own changes during all phases of its lifetime, that is, birth, conversion and transport, and decay. The goal of this review is to give a systematic and comprehensive view on exciton behavior in π-conjugated molecules and molecular assemblies at all phases of exciton evolution with emphasis on rates typical for this dynamic picture and various consequences of the above dynamics. To uncover the rich variety of exciton behavior, details of exciton formation, exciton transport, exciton energy conversion, direct and reverse intersystem crossing, and radiative and nonradiative decay are considered in different systems, where these processes lead to or are influenced by static and dynamic disorder, charge distribution symmetry breaking, photoinduced reactions, electron and proton transfer, structural rearrangements, exciton coupling with vibrations and intermediate particles, and exciton dissociation and annihilation as well.

Microcavity-like exciton-polaritons can be the primary photoexcitation in bare organic semiconductors

Strong-coupling between excitons and confined photonic modes can lead to the formation of new quasi-particles termed exciton-polaritons which can display a range of interesting properties such as super-fluidity, ultrafast transport and Bose-Einstein condensation. Strong-coupling typically occurs when an excitonic material is confided in a dielectric or plasmonic microcavity. Here, we show polaritons can form at room temperature in a range of chemically diverse, organic semiconductor thin films, despite the absence of an external cavity. We find evidence of strong light-matter coupling via angle-dependent peak splittings in the reflectivity spectra of the materials and emission from collective polariton states. We additionally show exciton-polaritons are the primary photoexcitation in these organic materials by directly imaging their ultrafast (5 × 10⁶m s^-1), ultralong (~270 nm) transport. These results open-up new fundamental physics and could enable a new generation of organic optoelectronic and light harvesting devices based on cavity-free exciton-polaritons.

Characterizing and Tuning the Properties of Polydiacetylene Films for Sensing Applications

Self-assembled, polymerized diacetylene (DA) nanostructures and two-dimensional films have been studied over the past two decades for sensor applications because of their straightforward visual readout. DA monomers, when exposed to UV light, polymerize to produce a visibly blue polymer. Blue phase polydiacetylenes (PDAs) when exposed to an external stimuli, such as temperature or UV light, undergo a chromatic phase transition to a fluorescent, visibly red phase. The tunability of the monomer to blue to red chromatic phase transitions by choice of diacetylene monomer in the presence of metal cations is systematically and comprehensively investigated to determine their effects on the properties of PDA Langmuir films. The polymerization kinetics and domain morphology of the PDA films were characterized using polarized fluorescent microscopy, UV-vis-fluorescent spectroscopy, and Fourier transform infrared spectroscopy (FTIR). Increasing the monomer alkyl tail length was found to strongly increase the UV dose necessary to produce optimally blue films and fully red films. A decrease in the polymer domain size was also correlated with longer-tailed DA molecules. Metal cations have a diverse effect on the film behavior. Alkaline-earth metals such as Mg, Ca, and Ba have a negligible effect on the phase transition kinetics but can be used to tune PDA polymer domain sizes. The Ni and Fe cations increase the UV dose necessary to produce red phase PDA films and significantly decrease the polymer domain sizes. The Zn, Cd, and Cu ions exhibit strong directed interactions with the PDA carboxylic acid headgroups, resulting in quenched fluorescence and a unique film morphology. FTIR analysis provides insight into the metal-PDA binding mechanisms and demonstrates that the coordination between the PDA film headgroups and the metal cations can be correlated with changes in the film morphology and kinetics. The findings from these studies will have broad utility for tuning PDA-based sensors for different applications and sensitivity ranges.

Turn-On Photocatalysis: Creating Lone-Pair Donor-Acceptor Bonds in Organic Photosensitizer to Enhance Intersystem Crossing

There is growing interest in developing triplet photosensitizers in terms of implementing photochemical strategies in synthetic chemistry. However, synthesis of stable triplet organic photosensitizers is nontrivial and often requires the use of heavy atoms. Herein, an alternative strategy is demonstrated to enhance the triplet generation efficiency by implanting lone-pair donor-acceptor bonds in the conjugated covalent organic frameworks (COFs). This powerful method is validated using COFs that host triazine, a moiety that has been extensively investigated in photocatalysis. Spectroscopic analysis and theoretical calculations reveal substantial improvements in the photoabsorptivity and triple-state photogeneration efficiency, consistent with catalytic tests concerning industrially relevant sulfide oxidation. These systems represent a promising addition to the rapidly increasing arsenal of synthetic photocatalytic systems.

Exciton Diffusion in Highly-Ordered One Dimensional Conjugated Polymers: Effects of Back-Bone Torsion, Electronic Symmetry, Phonons and Annihilation

Many optoelectronic devices based on organic materials require rapid and long-range singlet exciton transport. Key factors controlling exciton transport include material structure, exciton-phonon coupling and electronic state symmetry. Here, we employ femtosecond transient absorption microscopy to study the influence of these parameters on exciton transport in one-dimensional conjugated polymers. We find that excitons with 2¹A_g^- symmetry and a planar backbone exhibit a significantly higher diffusion coefficient (34 ± 10 cm² s^-1) compared to excitons with 1¹B_u⁺ symmetry (7 ± 6 cm² s^-1) with a twisted backbone. We also find that exciton transport in the 2¹A_g^- state occurs without exciton-exciton annihilation. Both 2¹A_g^- and 1¹B_u⁺ states are found to exhibit subdiffusive behavior. Ab initio GW-BSE calculations reveal that this is due to the comparable strengths of the exciton-phonon interaction and exciton coupling. Our results demonstrate the link between electronic state symmetry, backbone torsion and phonons in exciton transport in π-conjugated polymers.

Overlap-Driven Splitting of Triplet Pairs in Singlet Fission

We analyze correlated-triplet-pair (TT) singlet-fission intermediates toward two-triplet separation (T...T) using spin-state-averaged density matrix renormalization group electronic-structure calculations. Specifically, we compare the triplet-triplet exchange (J) for tetracene dimers, bipentacene, a subunit of the benzodithiophene-thiophene dioxide polymer, and a carotenoid (neurosporene). Exchange-split energy gaps of J and 3J separate a singlet from a triplet and a singlet from a quintet, respectively. We draw two new insights: (a) the canonical tetracene singlet-fission unit cell supports precisely three low-lying TT intermediates with order-of-magnitude differences in J, and (b) the separable TT intermediate in carotenoids emanates from a pair of excitations to the second triplet state. Therefore, unlike with tetracenes, carotenoid fission requires above-gap excitations. In all cases, the distinguishability of the molecular triplets-that is, the extent of orbital overlap-determines the splitting within the spin manifold of TT states. Consequently, J represents a spectroscopic observable that distnguishes the resemblance between TT intermediates and the T...T product.