Multi-template imprinted polymers for simultaneous selective solid-phase extraction of six phenolic compounds in water samples followed by determination using capillary electrophoresis

Membrane protected multi-template molecularly imprinted polymer based micro-solid phase extraction coupled with high performance liquid chromatography for analysis of chlorophenols

Multi-template molecularly imprinted materials (mt-MIPs) were prepared by surface imprinting and sealed into porous nylon membrane as micro-solid phase extraction (μ-SPE) device, coupled with high performance liquid chromatography (HPLC) to simultaneously extract and determine five typical chlorophenols (CPs) in leather matrices. By using well-prepared mesoporous silica modified multiwalled carbon nanotubes (MWCNTs@mSi) as supporting materials, and the mixture solution of five CPs as templates, the imprinted layer containing recognition sites of the CPs were formed via free radical polymerization. The as-prepared mt-MIPs were characterized by SEM, TEM, FT-IR and TGA, and the adsorption properties were investigated including static, dynamic and selective adsorption, showing high adsorption capacity of 39.15‒71.43 mg g-1 and rapid mass transfer rate (within 30 min). Parameters affecting the extraction efficiency of membrane protected μ-SPE were optimized, including the type of membrane, amount of adsorbent, type and volume of desorption solvent, desorption time and salt effect. The established mt-MIPs-μ-SPE-HPLC method demonstrated satisfactory linearity of 2.0‒200 µg L-1, high sensitivity with LODs of 0.17‒0.52 µg L-1, and high enrichment factor (70.6‒144). Consequently, the method was successfully applied to the analysis of five CPs in tannery wastewater, finished leather and wet blue samples. Spike recoveries ranged from 73.00 %‒115.2 %, with RSDs of 0.28 %‒11.4 %, and matrix interference was examined to be negligible. The developed method proved viable for the simultaneous extraction and quantification of trace CPs in complex leather matrices.

Application of Molecularly Imprinted Polymers as Separation Tools for Determination of Aflatoxins in Food

Molecularly imprinted polymers (MIPs) have emerged as an innovative technology for the selective determination of aflatoxins, thus presenting a promising strategy for enhancing food safety. Aflatoxins are a potent group of mycotoxins that present significant health and economic challenges worldwide, highlighting the urgent need for rapid, affordable, and reliable detection techniques. This review discusses work published between 2015 and 2024 on the synthesis of MIPs for aflatoxins and the current advances in their application for aflatoxin determination, focusing on their integration into solid-phase extraction techniques. Further, the review explores the challenges associated with MIP-based approaches, including cross-reactivity, template leaching, and scalability, while discussing innovative solutions such as hybrid materials and green synthesis methods. MIPs are potential alternatives to traditional biorecognition elements, such as antibodies because they offer improved selectivity, stability, and reusability. Prospects for MIP applications in multiplex detection systems are also examined. This comprehensive study highlights MIPs' transformative potential in combating mycotoxin contamination, paving the way for safer and more efficient food monitoring systems.

Modified vermiculite as a sorbent phase for stir-bar sorptive extraction

BACKGROUND

The presence of emerging contaminants (ECs) is a cause of great concern nowadays, and they are present at very low concentrations in surface waters, requiring a preconcentration process for their reliable quantification. The technique of Stir-Bar Sorptive Extraction (SBSE) is a valuable tool for achieving this purpose, and different sorbents have been developed to produce the bars. In this sense, we propose the use of the clay mineral vermiculite (Vt), modified with alkylammonium salts, aiming the determination of the ECs: bisphenol A, diclofenac, ibuprofen and triclosan in surface water samples.

RESULTS

The best conditions for sorption and desorption were: 50.0 mL of sample at pH 4.0, under stirring at 600 rpm (120 min), being the desorption carried out under sonication for 20 min using 500 μL of methanol, and the analytes were determined using LC-DAD. A linear range from 0.50 to 2.50 μg L-1 or from 0.50 to 5.00 μg L-1 and R2 higher than 0.9480 were observed, and attractive real enrichment factors between 116 and 177 times, affording a LOD between 0.11 and 0.33 μg L-1. The method was applied to determine the four ECs in samples of tap, river, and lake waters, presenting recovery results between 42.0 and 128.0 %, and RSD from 0.4 to 19.6 %. The bars prepared using Vt presented good chemical and mechanical resistance, even modified using the alkylammonium salts, permitting them to be employed at least 30 times, without memory effects.

SIGNIFICANCE

The modified Vt, afforded a simple, low-cost, and attractive alternative to work as a sorbent phase for SBSE technique, presenting very appropriate analytical parameters, even employing LC-DAD. Although the sorbent was applied to a limited number of contaminants, it is probable that other analytes could be successfully determined. It is important to notice that this is the first study reported, employing modified Vt for SBSE application.

Reshaping Capillary Electrophoresis With State-of-the-Art Sample Preparation Materials: Exploring New Horizons

Capillary electrophoresis (CE) is a powerful analysis technique with advantages such as high separation efficiency with resolution factors above 1.5, low sample consumption of less than 10 µL, cost-effectiveness, and eco-friendliness such as reduced solvent use and lower operational costs. However, CE also faces limitations, including limited detection sensitivity for low-concentration samples and interference from complex biological matrices. Prior to performing CE, it is common to utilize sample preparation procedures such as solid-phase microextraction (SPME) and liquid-phase microextraction (LPME) in order to improve the sensitivity and selectivity of the analysis. Recently, there have been advancements in the development of novel materials that have the potential to greatly enhance the performance of SPME and LPME. This review examines various materials and their uses in microextraction when combined with CE. These materials include carbon nanotubes, covalent organic frameworks, metal-organic frameworks, graphene and its derivatives, molecularly imprinted polymers, layered double hydroxides, ionic liquids, and deep eutectic solvents. The utilization of these innovative materials in extraction methods is being examined. Analyte recoveries and detection limits attained for a range of sample matrices are used to assess their effects on extraction selectivity, sensitivity, and efficiency. Exploring new materials for use in sample preparation techniques is important as it enables researchers to address current limitations of CE. The development of novel materials has the potential to greatly enhance extraction selectivity, sensitivity, and efficiency, thereby improving CE performance for complex biological analysis.

Magnetic multi-template molecularly imprinted polymers for selective simultaneous extraction of chlorophenols followed by determination using HPLC

Magnetic multi-template molecularly imprinted polymers (M-mt-MIPs) were successfully synthesized by surface imprinting and multi-template imprinting strategy, using polydopamine coated magnetic multi-walled carbon nanotubes as supporting materials, five typical chlorophenols (CPs) as templates, methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linker. Compared to non-imprinted polymers (NIPs), the as-prepared M-mt-MIPs showed high adsorption capacity (32.58‒80.63 mg g-1), rapid mass transfer and specific selectivity for the five targeted CPs, which were applied as magnetic solid-phase extraction (MSPE) adsorbents. Parameters affecting MSPE efficiency were detailed investigated, such as adsorbents dosage, sample pH, extraction time, type and volume of desorption solvent and salt effect. Combined with HPLC-DAD, a simple, rapid and sensitive method was established, showing good linearity (2‒200 μg L-1), low limits of detection (0.32‒0.49 μg L-1), and high enrichment factors (35.2‒108). The developed M-mt-MIPs-MSPE-HPLC method was applied to enrich and determine CPs in tannery wastewater, wet-blue and crust leather, and satisfactory spiking recoveries were attained in the range of 73.95‒109.7% with relative standard deviations (RSDs) of 2.13-8.48%. This study provided a new alternative material and method to rapid simultaneously extract and analyze low concentration of typical CPs in complicated matrices.

Computational design and preparation of water-compatible noncovalent imprinted microspheres

Herein, 2,4-dichlorophenoxyacetic acid (2,4-D) was used as a model template in a rational design strategy to produce water-compatible noncovalent imprinted microspheres. The proposed approach involved computational modelling for screening functional monomers and a simple method for preparing monodisperse and highly cross-linked microspheres. The fabricated non-imprinted polymer (NIP) and 2,4-d-imprinted polymer (2,4-d-MIP) were characterised, and their adsorption capabilities in an aqueous environment were evaluated. Results reveal that the pseudo-second-order kinetics model was appropriate for representing the adsorption of 2,4-D on NIP and 2,4-d-MIP, with R2 values of 0.97 and 0.99, respectively. The amount of 2,4-D adsorbed on 2,4-d-MIP (97.75 mg g-1) was considerably higher than those of phenoxyacetic acid (35.77 mg g-1), chlorogenic acid (9.72 mg g-1), spiramycin (1.56 mg g-1) and tylosin (1.67 mg g-1). Furthermore, it exhibited strong resistance to protein adsorption in an aqueous medium. These findings confirmed the feasibility of the proposed approach, providing a reference for the development of water-compatible noncovalent imprinted polymers.

Harnessing an amide-based covalent organic framework in solid-phase extraction for chlorophenol analysis in industrial wastewaters

An amide-based covalent organic framework (COF) was successfully synthesized using the reaction between 1,3,5-trimesoyl chloride and ethylenediamine. The structure and morphology of the COF were characterized using Fourier-transform infrared spectra, nuclear magnetic resonance spectroscopy, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller surface area analysis. The COF was employed as a solid-phase extraction adsorbent for the sampling and preconcentration of chlorophenols from industrial wastewater samples prior to high-performance liquid chromatography with ultraviolet detection. The experimental parameters influencing the extraction efficiency including type and volume of eluent solvent, sample solution volume, salt concentration, sample flow rate, and sample solution pH were investigated and optimized using a response surface methodology employing Box-Behnken-design. Under optimized conditions, calibration curves exhibited good linearities over the range of 0.003-10 µg/mL with determination coefficients (R2) ranging from 0.9982 to 0.9999. The method's limits of detection ranged from 0.001 to 0.01 µg/mL. Good repeatability was achieved with relative standard deviations below 4.7%. The developed procedure utilizing the COF adsorbent was successfully applied to determine chlorophenols accurately and precisely in various industrial wastewater samples.

Room-temperature fabrication of fluorinated covalent organic polymer @ Attapulgite composite for in-syringe membrane solid-phase extraction and analysis of domoic acid in aquatic products

A novel fluorinated covalent organic polymer @ attapulgite composite (F-COP@ATP) was prepared at room temperature for in-syringe membrane solid-phase extraction (SM-SPE) of domoic acid (DA) in aquatic products. Natural ore ATP has the advantages of low cost, good mechanical strength and abundant hydroxyl group on its surface, and in-situ modified F-COP layer can provide abundant adsorption sites. F-COP@ATP combining the advantages of F-COP and ATP, becomes an ideal adsorbent for DA extracting. Moreover, a high-throughput sample preparation strategy was carried out by using the F-COP@ATP membrane as syringe filter and assembling syringes with a ten-channel injection pump. In addition, the experimental factors were optimized, such as pH of extract, amount of adsorbent, velocity of extraction and desorption, type and volume of desorption solvent. The DA analytical method was established by SM-SPE-HPLC/tandem mass spectrometry. The method had a wide linear range with low limit of detection (0.344 ng/kg) and low limit of quantification (1.14 ng/kg). F-COP@ATP membrane can be reused more than five times. The method realized the analysis of DA in scallop and razor clam samples, which shows its application prospect in practical analysis. This study provided an efficient, low-energy and mild idea for preparing other reusable natural mineral ATP-based composite materials for separation and enrichment, which reduces the experimental cost and is closer to environmental protection and green chemistry to a certain extent.

Dual optical detection approach for capillary electrophoresis following two-step liquid-liquid extraction to determine ten phenols in water samples

In this research, the analytical method was developed and evaluated for determining phenol and its nine derivatives belong to the US EPA priority pollutant list in water samples by using dual-channeled capillary electrophoresis (CE) coupled with two types of optical detectors, namely LED-induced fluorescence (LEDIF) and ultraviolet (UV) detectors. The optimal background electrolytes for the first and second CE channels were 20 mM borate (pH 9.80) with 400 µM fluorescein and 55 mM borate (pH 11.75), respectively. The two-step liquid-liquid extraction (LLE) was used for sample preparation and enrichment, in which phenol and its derivatives were extracted from the aqueous phase using 10 mL of n-hexane/1-octanol (60/40, v/v) and then were back extracted into a 0.1 M NaOH as a final acceptor phase. Under the optimal CE and two-step LLE conditions, the enrichment factors of 10 phenols were 184 - 1120-fold, and the method detection limits were lowered to 0.02-0.60 µg/L. The obtained intra-day and inter-day precisions in terms of relative standard deviations (RSD) were between 4.0 and 7.3 % and 6.7 and 14 %, respectively. This approach was used to determine phenols in water samples, with recoveries ranging from 82.0 to 108.9 %. In combination with sample enrichment by two-step LLE extraction, this is the first CE study conducted to determine phenols in the EPA list using two detector approaches, specifically CE-LEDIF/CE-UV.

Controllable synthesis of uniform flower-shaped covalent organic framework microspheres as absorbent for solid-phase extraction of trace 2,4-dichlorophenol

Controllable synthesis of micro-flower covalent organic frameworks (MFCOFs) with controllable size, monodisperse, spherical, and beautiful flower shape was realized by using 2,5-diformylfuran (DFF) and p-phenylenediamine (p-PDA) as building blocks at room temperature. High-quality MFCOFs (5 - 7 μm) were synthesized by controlling the kind of solvent, amounts of monomers, catalyst content, and reaction time. The synthesized MFCOFs possessed uniform mesopores deriving from the intrinsic pores of frameworks and wide-distributed pores belonging to the gap between the petals. The MFCOFs-packed solid-phase extraction (SPE) column shows adsorption capacity of about 8.85 mg g-1 for 2,4-dichlorophenol (2,4-DCP). The MFCOF-based SPE combined with the HPLC method was established for the determination of 2,4-DCP in environmental water. The linear range of this method is 20-1000 ng mL-1 (R2 > 0.9994), and limit of detection (S/N = 3) is 10.9 ng mL-1. Spiked recoveries were 94.3-98.5% with relative standard deviations lower than 2.3%.

Hierarchical porous zeolitic imidazolate framework‑8 supported hollow-fiber liquid-phase microextraction of nine typical phenolic pollutants in water samples followed by electrophoretic analysis

Hierarchical porous zeolitic imidazolate framework‑8 (HpZIF-8) have not only good chemical and thermal stability, but also pore structures of different sizes. In this work, HpZIF-8 supported hollow-fiber liquid-phase microextraction (HpZIF-8@HF-LPME) co-modified with tributyl phosphate and 2-nitroethyl benzene was firstly developed for purification and enrichment of nine typical phenolic pollutants followed by electrophoretic separation and amperometric detection (CE-AD). The key enrichment parameters were optimized by full factorial experimental and central composite designs. Under the optimum conditions, the maximum enrichment factors for the nine analytes were 479 (phenol), 249 (2-chlorophenol), 821 (4-chlorophenol), 1253 (3-methylphenol), 1376 (2,4-dichlorophenol), 1078 (2,4,6-trichlorophenol), 200 (pentachlorophenol), 614 (4-nitrophenol) and1827 times (bisphenol A), respectively. The limits of detection were 0.060-1.5 µg L-1 (S/N = 3) in real sample matrixes. This proposed method has been successfully applied to water samples with high ionic strength, and the average recoveries were in the range of 80.2-118.0%. This developed method of HpZIF-8@HF-LPME/CE-AD needs no desorption and derivatization, providing an alternative for monitoring typical phenolic pollutants in water samples.

A molecularly imprinted polymer monolithic column with dual template and bifunctional monomers for selective extraction and simultaneous determination of eight phenolics from polycarbonate cups

A molecularly imprinted polymer (MIP) monolithic column was prepared in situ in a pipette tip using phenol and bisphenol A as dual templates, 4-vinyl pyridine and β-cyclodextrin as bifunctional monomers. It was used for the selective and simultaneous solid phase extraction of eight phenolics, including phenol, m-cresol, p-tert-butylphenol, bisphenol A, bisphenol B, bisphenol E, bisphenol Z, and bisphenol AP. The MIP monolithic column was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and nitrogen adsorption experiment. The results of selective adsorption experiments showed that the MIP monolithic column can selective recognize the phenolics and have excellent adsorption property. The imprinting factor for bisphenol A can be as high as 4.31, and the maximum adsorption capacity for bisphenol Z can reach 201.66 mg g^-1. Under the optimal extraction conditions, a selective and simultaneous extraction and determination method for eight phenolics was established based on the MIP monolithic column and high-performance liquid chromatography with ultraviolet detection. The linear ranges (LRs) of the eight phenolics were 0.5-200 μg L^-1, the limits of quantification (LOQs) and detection (LODs) were 0.5-2.0 μg L^-1 and 0.15-0.67 μg L^-1. The method was applied to detect the migration quantity of the eight phenolics from polycarbonate cups and had satisfactory recovery. The method has the advantages of simple synthesis, short extraction time, as well as good repeatability and reproducibility, which provides a sensitive and reliable strategy for extracting and detecting phenolics from food contact material.

N-rich hypercrosslinked porous polymers for highly efficient preconcentration and sensitive detection of chlorophenols

Three novel N-rich hypercrosslinked porous polymers (NHCP1, NHCP2, and NHCP3) were facilely developed using Friedel-Crafts alkylation. NHCP1 with a remarkably large surface area (2066 m² g^-1) showed the best adsorption performance for chlorophenol pollutants. A sensitive and simple method was developed by using NHCP1 as a sorbent for solid-phase extraction to preconcentrate several chlorophenols in honey, water, and peach beverage samples followed by determination using a high-performance liquid chromatography-ultraviolet detector. The detection wavelength was 280 nm. Under the optimized conditions, the linear ranges were 1.67-1000 ng g^-1 for honey, 0.170-100 ng mL^-1 for water, and 0.330-100 ng mL^-1 for peach beverage samples. The detection limits (S/N = 3) were 0.500-2.00 ng g^-1, 0.0500-0.100 ng mL^-1, and 0.100-0.200 ng mL^-1, respectively. Recovery values were 89.3-111% with relative standard deviations <9.4%. The proposed extraction/preconcentration and quantitative analysis method provides an affordable and effective alternative for the preconcentration and determination of low levels of chlorophenols in real samples.

A carbon based-screen-printed electrode amplified with two-dimensional reduced graphene/Fe3O4 nanocomposite as electroanalytical sensor for monitoring 4-aminophenol in environmental fluids

The analysis water pollutants are so important strategy for investigation of water quality. On the other hand, 4-aminophenol is known as a hazardous and high-risk compound for humans, and its detection and measurement is very important for investigating the quality of surface and groundwater. In this study, graphene/Fe₃O₄ nanocomposite was synthesized by a simple chemical method and characterized by EDS and TEM methods and results showed Nano spherical shape of Fe₃O₄ nanoparticle with diameter about 20 nM decorated at surface of 2D reduce graphene nanosheet (2D-rG-Fe₃O₄). The 2D-rG-Fe₃O₄ was used as excellent catalyst at surface of carbon-based screen-printed electrode (CSPE) and used as electroanalytical sensor in monitoring and determination of 4-aminophenol in waste water sample. The results confirmed improving ∼4.0 times in oxidation signal and reducing 120 mV in oxidation potential of 4-aminophenol at surface of 2D-rG-Fe₃O₄/CSPE compare to CSPE, respectively. The electrochemical investigation showed pH dependence behavior with equal value of electron and proton for -aminophenol at surface of 2D-rG-Fe₃O₄/CSPE. Using square wave voltammetry method (SWV), the 2D-rG-Fe₃O₄/CSPE successfully monitored 4-aminophenol in the concentration range 1.0 nM-200 μM. Finally, 2D-rG-Fe₃O₄/CSPE monitored 4-aminophenol in the different environmental fluids such as urban waste water, industrial waste water and river samples with recovery range 97.2%-104.3% that confirm powerful ability of 2D-rG-Fe₃O₄/CSPE as analytical tool.

State-of-art advances on removal, degradation and electrochemical monitoring of 4-aminophenol pollutants in real samples: A review

p_Aminophenol, namely 4-aminophenol (4-AP), is an aromatic compound including hydroxyl and amino groups contiguous together on the benzene ring, which are suitable chemically reactive, amphoteric, and alleviating agents in nature. Amino phenols are appropriate precursors for synthesizing oxazoles and oxazines. However, since the toxicity of aniline and phenol can harm human and herbal organs, it is essential to improve a reliable technique for the determination of even a trace amount of amino phenols, as well as elimination or (bio)degradation/photodegradation of it to protect both the environment and people's health. For this purpose, various analytical methods have been suggested up till now, including spectrophotometry, liquid chromatography, spectrofluorometric and capillary electrophoresis, etc. However, some drawbacks such as the requirement of complex instruments, high costs, not being portable, slow response time, low sensitivity, etc. prevent them to be employed in a wide range and swift in-situ applications. In this regard, besides the efforts such as (bio)degradation/photodegradation or removal of 4-AP pollutants from real samples, electroanalytical techniques have become a promising alternative for monitoring them with high sensitivity. In this review, it was aimed to emphasize and summarize the recent advances, challenges, and opportunities for removal, degradation, and electrochemical sensing 4-AP in real samples. Electroanalytical monitoring of amino phenols was reviewed in detail and explored the various types of electrochemical sensors applied for detecting and monitoring in real samples. Furthermore, the various technique of removal and degradation of 4-AP in industrial and urban wastes were also deliberated. Moreover, deep criticism of multifunctional nanomaterials to be utilized as a catalyst, adsorbent/biosorbent, and electroactive material for the fabrication of electrochemical sensors was covered along with their unique properties. Future perspectives and conclusions were also criticized to pave the way for further studies in the field of application of up-and-coming nanostructures in environmental applications.

Facile fabrication of hydroxyl-functionalized hypercrosslinked polymer for sensitive determination of chlorophenols

Three hydroxyl-functionalized hypercrosslinked polymers (HCP-POL, HCP-HQ and HCP-PG) were synthesized by Friedel-Crafts reaction. The HCP-HQ displayed the largest surface area and highest adsorption capacity for chlorophenols (CPs). Thus, the HCP-HQ was further modified with magnetism to obtain M-HCP-HQ. An efficient magnetic solid-phase extraction method with M-HCP-HQ as adsorbent was developed for the first time to simultaneously extract four CPs from water and honey samples before analysis by high performance liquid chromatography-diode array detection. Under optimized conditions, the low detection limits (S/N = 3) were obtained to be 0.06-0.10 ng mL^-1 for water and 0.80-1.75 ng g^-1 for honey. The method recovery was 80.7%-119%, with relative standard deviations below 9.5%. The enrichment factors of the CPs were in the range of 57-220. The extraction mechanism could be attributed to the strong polar interaction, hydrogen bonding and π-π interactions between the M-HCP-HQ and CPs. The M-HCP-HQ based method can be served as a reliable and sensitive tool for detection CPs in water and honey samples.

Pseudo-template molecularly imprinted polymeric fiber solid-phase microextraction coupled to gas chromatography for ultrasensitive determination of 2,4,6-trihalophenol disinfection by-products

2,4,6-trihalorophenol disinfection by-products (DBPs) have strong toxicity to be needed for monitoring. In this study, two kind of molecularly imprinted polymeric fibers were prepared using 2,4,6-trichlorophenol as template and tricuronic phloroglucinol (MOP) as pseudo-template, respectively. The two fibers were assembled as solid phase microextraction (SPME) fiber to extract 2,4,6-trihalophenol DBPs from water and detect them by gas chromatography coupled to electron capture detector (GC-ECD). The results of F-test and t-test stated that there are significant difference in the analytical results of 2,4,6-trichlorophenol between using the fiber based on 2, 4, 6-trichlorophenol as template and MOP as pseudo-template. It was found that the carry-over of template (2,4,6-trichlorophenol) leaked from the fiber in GC thermal desorption, resulting in the wrong quantitative analytical result for 2,4,6-trichlorophenol in water. Hence, molecularly imprinted polymeric fibers based on MOP as pseudo-template was applied for the determination of 2,4,6-trihalophenol DBPs in water combined with GC-ECD. The selectivity of the fiber for 2,4,6-trihalophenol DBPs was investigated and demonstrated. Under the optimized condition, the method has much lower limit of detection (0.5-1.1 pg mL^-1) than most reported methods. The method was applied for the determination of 2,4,6-trihalophenol DBPs in environmental water and the relative recoveries were found to be in the range from 77.1% to 105.6% and the relative standard deviation was 0.5-9.4%. 2,4,6-tribromophenol was found at concentration of 0.054 ng mL^-1 in a swimming pool.

Screen-printed graphite electrode modified with Co3O4nanoparticles and 2D graphitic carbon nitride as an effective electrochemical sensor for 4-aminophenol detection

We fabricated a new electrochemical 4-aminophenol sensor based on a nanocomposite of Co₃O₄nanoparticles and graphite carbon nitride (Co₃O₄@g-C₃N₄), used for the modification of a screen-printed electrode (Co₃O₄@g-C₃N₄/SPE). The synthesized nanocomposite was characterized using field-emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and Fourier transform-infrared (FT-IR) techniques. The electro-oxidation of 4-aminophenol in phosphate buffer solution (pH = 7.0) was investigated via cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The peak current of oxidation in the optimized conditions had a linear relationship with various 4-aminophenol contents (0.05-780.0μM) with a correlation coefficient of 0.9996 and the limit of detection (S/N = 3) of 1.5 × 10^-8M. The developed method was successful to determine 4-aminophenol in real specimens, with acceptable outcomes.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Synthesis of surface dual-template molecularly imprinted silica nanoparticles for extraction of ciprofloxacin and norfloxacin

Synthesis of selective dual-template molecularly imprinted silica nanoparticles (MI-SiNPs) on the surface of graphene quantum dots (GQDs) for the simultaneous extraction of ciprofloxacin (CIP) and norfloxacin (NOR) from biological samples.

Magnetic solid-phase extraction using polydopamine-coated magnetic multiwalled carbon nanotube composites coupled with high performance liquid chromatography for the determination of chlorophenols

Polydopamine (PDA)-coated magnetic multiwalled carbon nanotube (M-MWCNT) composites were synthesized in two facile preparation steps, and were used as adsorbents for magnetic solid-phase extraction (MSPE) coupled with high-performance liquid chromatography (HPLC) for simultaneous extraction, enrichment and determination of five kinds of typical chlorophenols (CPs) in water samples. The as-prepared magnetic composites showed excellent magnetic properties and high thermal stability. Various main parameters influencing the extraction efficiency of MSPE were systematically investigated. Under the optimized MSPE-HPLC conditions, a high enrichment factor (EF) was obtained in the range of 85-112 for 2-chlorophenol (2-CP), 4-chlorophenol (4-CP), 2,6-dichlorophenol (2,6-DCP), 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP). Good linearity was obtained in the range of 2.0-200 μg L^-1 for 2-CP and 4-CP and 1.0-200 μg L^-1 for 2,6-DCP, 2,4-DCP and 2,4,6-TCP, with a correlation coefficient (R²) higher than 0.9964. The limits of detection (LODs) and the limits of quantification (LOQs) were in the range of 0.10-0.31 μg L^-1 and 0.35-1.03 μg L^-1, respectively. The intraday and interday precisions evaluated using relative standard deviation (RSD) values were in the range of 1.05-2.25% and 1.88-2.83%, respectively. The validated MSPE-HPLC method was also successfully applied to analyze five kinds of CPs in tap water, lake water, river water and seawater samples, and satisfactory recoveries were obtained in the range of 76.87-106.5% with RSDs of 1.64-6.78%.

On-line duplex molecularly imprinted solid-phase extraction for analysis of low-abundant biomarkers in human serum by liquid chromatography-tandem mass spectrometry

In the present work, a pair of molecularly imprinted polymers (MIPs) targeting distinct peptide targets were packed into trap columns and combined for automated duplex analysis of two low abundant small cell lung cancer biomarkers (neuron-specific enolase [NSE] and progastrin-releasing peptide [ProGRP]). Optimization of the on-line molecularly imprinted solid-phase extraction (MISPE) protocol ensured that the MIPs had the necessary affinity and selectivity towards their respective signature peptide targets - NLLGLIEAK (ProGRP) and ELPLYR (NSE) - in serum. Two duplex formats were evaluated: a physical mixture of the two MIPs (1:1 w/w ratio) inside a single trap column, and two separate MIP trap columns connected in series. Both duplex formats enabled the extraction of the peptides from serum. However, the trap columns in series gave superior extraction efficiency (85.8±3.8% and 49.1±6.7% for NLLGLIEAK and ELPLYR, respectively). The optimized protocol showed satisfactory intraday (RSD≤23.4 %) and interday (RSD≤14.6%) precision. Duplex analysis of NSE and ProGRP spiked into digested human serum was linear (R²≥0.98) over the disease range (0.3-30 nM). The estimated limit of detection (LOD) and limit of quantification (LOQ) were 0.11 nM and 0.37 nM, respectively, for NSE, and 0.06 nM and 0.2 nM, respectively, for ProGRP. Both biomarkers were determined at clinically relevant levels. To the best of our knowledge, the present work is the first report of an automated MIP duplex biomarker analysis. It represents a proof of concept for clinically viable duplex analysis of low abundant biomarkers present in human serum or other biofluids.

Molecular Imprinting: Green Perspectives and Strategies

Advances in revolutionary technologies pose new challenges for human life; in response to them, global responsibility is pushing modern technologies toward greener pathways. Molecular imprinting technology (MIT) is a multidisciplinary mimic technology simulating the specific binding principle of enzymes to substrates or antigens to antibodies; along with its rapid progress and wide applications, MIT faces the challenge of complying with green sustainable development requirements. With the identification of environmental risks associated with unsustainable MIT, a new aspect of MIT, termed green MIT, has emerged and developed. However, so far, no clear definition has been provided to appraise green MIT. Herein, the implementation process of green chemistry in MIT is demonstrated and a mnemonic device in the form of an acronym, GREENIFICATION, is proposed to present the green MIT principles. The entire greenificated imprinting process is surveyed, including element choice, polymerization implementation, energy input, imprinting strategies, waste treatment, and recovery, as well as the impacts of these processes on operator health and the environment. Moreover, assistance of upgraded instrumentation in deploying greener goals is considered. Finally, future perspectives are presented to provide a more complete picture of the greenificated MIT road map and to pave the way for further development.

Dual-template magnetic molecularly imprinted polymer-based sorbent for simultaneous and selective detection of phenolic endocrine disrupting compounds in foodstuffs

In this research, an efficient (94.9-99.4%) and fast (5 min) method has been developed and validated for simultaneous identification and quantification of phenolic endocrine disrupting compounds with an emphasis on bisphenol A (BPA) and 4-cumylphenol (4-CP) in food stuffs using a dual-template magnetic, molecularly-imprinted polymer (dt-MMIP). The dt-MMIP was synthesized by a sol-gel method using Fe₃O₄@SiO₂ (as the core) and BPA and 4-CP (as templates). The dt-MMIP was coupled with magnetic solid phase extraction to simultaneously detect BPA and 4-CP in food samples. BPA was measured from bottled water and fruit juice samples samples at 0.36 and 0.24 ng mL^-1, respectively, while 4-CP in those samples was 0.33 and 0.16 ng mL^-1, respectively. Their detection limits were estimated as 0.04 and 0.05 ng mL^-1, respectively. The developed dt-MMIP method was highly reproducible, while maintaining a good cyclability up to 20 cycles.

Determination of phenols in natural and waste waters by capillary electrophoresis after preconcentration on magnetic nanoparticles coated with aminated hypercrosslinked polystyrene

An efficient sorbent for magnetic solid-phase extraction was developed from Fe₃ O₄ nanoparticles covered with aminated hypercrosslinked polystyrene. The sorbent has a saturation magnetization of 47 emu/g and a surface area of 509 mg/g and was tested for the extraction of 11 phenols from aqueous media. The optimum conditions were as follows: pH 3; adsorbent mass, 20.0 mg; adsorption time, 30 min; eluent (acetone) volume, 0.5 mL; and desorption time, 5 min. The enrichment factor after desorption reached 1595-1716 and the maximum adsorption capacity was 501-909 mg/g. Capillary electrophoresis was applied successively to separate 11 phenols after solid-phase extraction. The best separation was achieved using a fused silica capillary and borate buffer (pH 10.7) as a supporting electrolyte. After optimization, the linearity range was from 0.2 to 950 μg/L, and the limits of detection were 0.05-0.2 μg/L. The relative standard deviation varied from 6.1 to 8.7% (C = 1 μg/L) and from 2.9 to 3.5% (C = 500 μg/L). The determination of phenols is complicated in eutrophic water and spring water with a high content of humic and fulvic acids.

Porous thin-film molecularly imprinted polymer device for simultaneous determination of phenol, alkylphenol and chlorophenol compounds in water

A porous water-compatible molecularly imprinted polymer (MIP) coating using catechol as a pseudo-template and a water-soluble functional monomer (4-vinyl benzoic acid) with ethylene glycol dimethacrylate as the crosslinker was developed for extraction of phenols from environmental water samples. The MIP devices were combined with ultra high performance liquid chromatography with a photodiode array detector (UHPLC-PDA) suitable for the simultaneous determination of trace levels of phenolic compounds with a wide range of polarities -phenol, alkylphenols and chlorophenols- in seawater and produced water. Parameters that influence extraction efficiency (salinity, pH, polymer mass, desorption solvent, and desorption time) were optimized to give method detection limits (LOD) ranging from 0.1 to 2 μg L^-1 and linearity (R²>0.99) over at least three orders of magnitude for the hydrophobic phenols (e.g., 0.5-1000 μg L^-1 for 2,4,6-trichlorophenol) and ~2 orders of magnitude for the light phenols (e.g., 10-120 μg L^-1 for phenol, 5-120 μg L^-1 for methylphenols and 2-chlorophenol, 0.5-120 μg L^-1 3-methyl-4-chlorophenol and 2,4-dichlorophenol). The recoveries from authentic spiked samples ranged from 85 to 100% with %RSDs of 0.2-14% for seawater and 81-107% with %RSD of 0.1-11% for produced water. The resulting MIP-based extraction requires no pre-conditioning of the sorbent, and because the required sample size is small and sample manipulation is limited, the method is easy to multiplex for high throughput sample processing.

Preparation of multi-walled carbon nanotubes based magnetic multi-template molecularly imprinted polymer for the adsorption of phthalate esters in water samples

Taking the advantages of surface imprinting, multi-template imprinting and magnetic separation, a novel magnetic multi-template molecularly imprinted polymer (mag-MMIP@MWCNTs) was prepared by using MWCNTs as support material, Fe₃O₄ as magnetic core, and dimethyl phthalate (DMP), diethyl phthalate (DEP), and dibutyl phthalate (DBP) as template molecules. This composite was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), and the Brunauer-Emmett-Teller (BET) analysis, and was used for the simultaneous adsorption of DMP, DEP, and DBP in aqueous solution. The effects of solution pH, contact time, PAEs initial concentration, temperature, adsorption selectivity, and reusability were investigated and discussed in detail. The results demonstrated that mag-MMIP@MWCNTs exhibited fast kinetics, good magnetic separation, and excellent selectivity for the adsorption of three phthalate esters (PAEs). The adsorption kinetics followed pseudo second-order kinetic model and the adsorption thermodynamics followed Langmuir isothermal model very well, and the maximum adsorption capacities (Q_max) of DMP, DEP, and DBP were obtained as 0.95, 1.38, and 7.09 mg g^-1, respectively. The Scatchard analysis revealed that the template-polymer system had a two-site binding behavior. The adsorption thermodynamic studies indicated that the adsorption processes were exothermic and spontaneous, and dominated by physical adsorption relying on hydrogen bond, hydrophobic interaction, and van der Waals force. Mag-MMIP@MWCNTs also showed good reproducibility and reusability for simultaneous adsorption of the three PAEs. The potential application of mag-MMIP@MWCNTs was proved by the removal of DMP, DEP, and DBP spiked in environmental water samples.

Dispersive liquid-liquid microextraction based on a new hydrophobic deep eutectic solvent for the determination of phenolic compounds in environmental water samples

Dispersive liquid-liquid microextraction has garnered increasing attention in sample preparation due to its rapid and efficient extraction process. In this study, a new terpineol-based hydrophobic deep eutectic solvent was firstly synthesized by mixing α-terpineol with 1-octanoic acid, and then applied to analysis of phenols from water samples by dispersive liquid-liquid microextraction combined with high-performance liquid chromatography and diode array detection. Infrared spectroscopy indicated that hydrogen bonding was responsible for the formation of deep eutectic solvent between α-terpineol and 1-octanoic acid. After optimization of several parameters, such as the type and volume of deep eutectic solvent and the disperser, pH and ionic strength of sample solution, the developed method exhibited excellent extraction performance to the phenols with the enrichment factors from 27 to 32. Good linearity was acquired ranging from 5 to 5000 μg/L, and detection of limits of the proposed method for the phenols ranged from 0.15 to 0.38 μg/L. The recoveries measured by spiked samples at three concentration levels ranged from 81.6 to 99.3%, and precision was found with intra- and inter-day relative standard deviations less than 8.7 and 9.2%, respectively. Finally, the proposed method was successfully applied to the determination of the phenols in environmental water samples.

Assessment of cross-reactivity in a tailor-made molecularly imprinted polymer for phenolic compounds using four adsorption isotherm models

Cross-reactivity is an important feature of molecularly imprinted polymers (MIPs), and is central to successful use of a pseudo-template in molecular imprinting. The adsorption and cross-reactivity of a molecularly imprinted polymer (MIP) designed for recognition of phenols from water was assessed using four different isotherm models (Langmuir (LI), Freundlich (FI), Langmuir-Freundlich (L-FI), and Brunauer, Emmett, and Teller (BET)). The L-FI model succeeded in explaining the cross-reactivity behavior through the total number of binding sites, the affinity constants and heterogeneity indices of the small phenols (phenol (ph), 2-methylphenol (2-MP), 3-methylphenol (3-MP), 2-chlorophenol (2-CP), 2,4-dimethylphenol (DMP), 2,4-dichlorophenol (DCP), 4-chloro-3-methylphenol (CMP)) with evidence that the phenols compete for binding sites based on their hydrophobicity as well as π-π, π-σ and dipole-dipole intermolecular forces. The recognition of the large phenols (2,4,6-trichlorophenol (TCP), pentachlorophenol (PCP), 4-teroctylphenol (4-OP), 4-nonylphenol (4-NP), which have much higher binding affinities than the smaller phenolic compounds, was explained with the BET isotherm model that predicts that multiple layers adsorb to the adsorbed monolayer. The adsorption behavior with MIPs is also shown to be superior to corresponding non-imprinted polymers and applicability of MIPs for trace analysis is highlighted.

Synthesis and characterization of a molecularly imprinted polymer (MIP) for solid-phase extraction of the antidiabetic gliclazide from human plasma

Gliclazide is a sulfonylurea frequently prescribed for the management of type 2 diabetes mellitus in elderly patients and for patients with chronic renal or hepatic diseases. Even though it is considered a safer alternative, the drug can provoke side effects in some patients, especially hypoglycemia, due to the high interindividual variability. Therefore, the quantification of gliclazide in biological samples is usually recommended in order to assure efficacy and safety of the pharmacotherapy. However, due to the complexity of biological matrices, therapeutic monitoring can be very challenging, especially in the sample preparation step. For that reason, the synthesis and characterization of a novel and selective molecularly imprinted polymer (MIP) was proposed to be employed as sorbent for the extraction of gliclazide from human plasma samples by a molecularly imprinted solid-phase extraction (MISPE) procedure. Synthesis conditions were optimized (monomer, crosslinker and porogen) and the polymer was characterized for its morphological, physicochemical and stability properties. The influence of drug concentration, solvent composition and pH on the coefficient of distribution (K_d) and imprinting factor (IF) were studied, as well as repeatability between batches and selectivity. A bioanalytical method was developed applying the developed MIP as sorbent in solid phase extraction and liquid chromatography using a Poroshell 120 C18 (100 × 4.6 mm, 4 μm) column, acetonitrile and 10 mM potassium phosphate buffer pH 3.0 (50:50) at a flow-rate of 1.2 mL/min as mobile phase, temperature of 30 °C, injection volume of 40 μL and detection at 230 nm. The best reaction yield, extraction capacity, and selectivity was obtained using 2-hydroxyethyl methacrylate (2-HEMA), ethyleneglycol dimethacrylate (EGDMA) and acetonitrile. The optimized MIP showed coefficient of distribution (K_d) of 59.85 μg/g, imprinting factor (IF) of 1.60, and selectivity for gliclazide and other sulfonylureas compared to possible concurrent drugs. The developed method by MISPE-HPLC-UV showed to be appropriate to determine gliclazide in human plasma samples.