Cyclosporine laden tailored microemulsion-gel depot for effective treatment of psoriasis: In vitro and in vivo studies

Emerging Therapeutic Agents and Nanotechnology-Driven Innovations in Psoriasis Management

Psoriasis has been a rising concern for over a decade, imposing significant challenges to individuals and society. Traditional topical therapy is non-targeted and acts systemically, with associated side effects. This increases the global burden both socially and economically. This review covers the evolution of drug molecules and nanotechnology-based approaches for the topical treatment of psoriasis, a chronic inflammatory skin disorder with no known etiology. Nanotechnology-based approaches offer promising solutions by reducing side effects, providing targeted delivery, protecting drug molecules from degradation, enhancing skin retention, and providing controlled release. Researchers have investigated the incorporation of various conventional and non-conventional therapeutic agents into nanocarriers for psoriasis treatment. The current understanding of the disease and its treatment using various therapeutic agents combined with novel formulation strategies will reduce the duration of treatment and improve the quality of life in psoriatic disease conditions.

Unlocking relief: formulation, characterization, and in vivo assessment of salicylic acid-loaded microemulgel for psoriasis management

Psoriasis, a chronic skin condition, affects around 2-5% of the population. Topical corticosteroids treat the vast majority of cases (> 80%). Because of the physicochemical characteristics of the damaged stratum corneum, all treatments are ineffective. Nevertheless, systemic immunosuppression, the oral strategy, has substantial adverse effects that may be avoided using the topical procedure. The research sought to determine if a salicylic acid-loaded microemulsion-based gel (emulgel) could successfully infiltrate and maintain salicylic acid in skin tissue for psoriasis treatment. The pseudo-ternary phase was generated in different Smix ratios (1:1, 2:1, and 3:1; Labrasol:Transcutol® P). At a 3:1 ratio, the Smix had a substantial microemulsion area. Microemulsion was characterized for particle size, pH, etc. For topical application, the selected microemulsion was combined with Carbopol 940 gel, and ex vivo permeation and drug retention study were conducted. The effectiveness of the developed gel was checked using the IMQ-induced psoriatic plaque model. Salicylic acid microemulsion has an average globule size of 79.72 nm, pH 5.93, and 100% transmittance. In an ex vivo diffusion study, emulgel revealed greater penetration and more drug retention than ordinary salicylic acid gel. The emulgel was non-irritating on the skin of rats. In vivo studies revealed significant antipsoriatic activity of microemulsion-loaded gel compared to the marketed product. Developed emulgel was considered a potential product for an effective and safe way to administer salicylic acid for the treatment of skin diseases such as psoriasis.

Understanding Microemulsions and Nanoemulsions in (Trans)Dermal Delivery

Continuously explored in pharmaceuticals, microemulsions and nanoemulsions offer drug delivery opportunities that are too significant to ignore, namely safe delivery of clinically relevant drug doses across biological membranes. Their effectiveness as drug vehicles in mucosal and (trans)dermal delivery is evident from the volume of published literature. Commonly, their ability to enhance skin permeation is attributed to dispersion size, a characteristic closely related to solubilization capacity. However, the literature falls short on distinctions between microemulsions and nanoemulsions for definitions, behavior, or specific differences in their mechanisms of action in (trans)dermal delivery. The focus is typically on surfactant/cosurfactant ratio and droplet size but the role of mesostructures or the effect of cosolvent (Csol), oil (O) or water (W) on permeation profile remain poorly explained. Towards a deeper understanding of these vehicles in (trans)dermal drug delivery, this review begins with their conceptual and practical distinctions before delving into the published works for less obvious but potentially important underlying mechanisms; notably composition and the competitive positioning of system constituents in the resulting microstructures and subsequent effect(s) these may have on skin structures and drug permeability. For practical purposes, this review focuses on formulation systems based on ternary diagrams with commonly accepted non-ionic surfactants, cosurfactants, cosolvents, and oils used in pharmaceutical applications.

Hyaluronan-Cholesterol nanogels embedding betamethasone for the treatment of skin inflammatory conditions

Topical application of the glucocorticoid betamethasone (BM) is a common treatment for inflammatory-related skin diseases, such as psoriasis. However, enhancing its bioavailability remains challenging due to poor skin permeability. Herein, we developed and evaluated hyaluronan-cholesterol (HACH) based nanohydrogel systems (NHs) and NHs-Carbopol formulation for dermal delivery of BM. Various parameters were investigated including particle size, surface charge, encapsulation efficiency, in vitro drug release kinetics and stability. The HACH-based NHs demonstrated high encapsulation efficiency, with apparent solubility improved up to 9-fold, small size (∼190 nm) and good stability at 4 ℃ and during long-term storage. Besides, the NHs-Carbopol formulation exhibited excellent rheological properties and an occlusive effect suitable for cutaneous application. Both in-vitro (using Strat-M® membrane) and ex-vivo (using pig ear skin) permeation studies revealed that these formulations significantly improved skin permeation and drug retention in the deeper layers of the epidermis and dermis, making it advantageous for the topical delivery of BM in psoriasis treatment. Moreover, the NHs system demonstrated potential anti-psoriatic activity by downregulating the proinflammatory cytokines in vitro in human keratinocytes (HaCaT cell line) and in an ex vivo 3D skin tissue model (EpiDerm-FT™).

Ionic Liquid-Mediated Transdermal Delivery of Organogel Containing Cyclosporine A for the Effective Treatment of Psoriasis

The dermal delivery of peptide therapeutics that are of high molecular weight is a challenge. Cyclosporine A (CsA) is a cyclic undecapeptide with poor aqueous solubility and high molecular weight (1202 Da) indicated for psoriasis. The objective of the study was to evaluate the effect of ionic liquids mixed with the Pluronic F127 matrix in skin permeation of CsA and its efficacy in psoriasis treatment. Choline and geranic acid (CAGE) ionic liquids in a 1:2 molar ratio were mixed with Pluronic F127 (22.7%) and PEG 400 (45%) to prepare an organogel formulation. The CsA-loaded CAGE (CsA-CAGE) and CAGE-Pluronic F127 gels (CsA-CAGE-P gel) were characterized for physical and rheological characteristics. The skin transport studies showed that free CsA did not permeate across the excised porcine skin after 48 h. The amount of CsA permeated across the oleic acid (0.25% v/v) and palmitic acid (0.25% w/v) cotreated skin was found to be 244 ± 4 and 1236 ± 17 μg/cm2, respectively. The application of CsA-CAGE and CsA-CAGE-P gel enhanced CsA flux by 110- and 135-fold, respectively, compared with the control. The thermal analysis and biophysical studies changed the barrier property of the skin significantly (p < 0.05) after incubation with CAGE and CAGE-P gel. The pharmacokinetic studies in the rat model showed that topical application of CsA-CAGE-P gel provided 2.6- and 1.9-fold greater C max and AUC0-t, respectively, compared to the control group. In vitro-in vivo level A correlations were established with R 2 values of 0.991 and 0.992 for both linear and polynomial equations for the CsA-CAGE-P gel formulation using the Wagner-Nelson method. The topical application of CsA-CAGE-P gel (10 mg/kg) on an imiquimod-induced plaque psoriatic model reduced the area of the psoriasis and severity index (PASI) score significantly for erythema and scaling, reversing the changes to skin thickness, blood flow rate, and transepidermal water loss. Together, CAGE-Pluronic F127 organogel was developed as an effective topical formulation for the local and systemic delivery of CsA for the treatment of psoriasis.

Recent Advancements and Trends of Topical Drug Delivery Systems in Psoriasis: A Review and Bibliometric Analysis

Psoriasis is an immune-mediated inflammatory skin disease where topical therapy is crucial. While various dosage forms have enhanced the efficacy of current treatments, their limited permeability and lack of targeted delivery to the dermis and epidermis remain challenges. We reviewed the evolution of topical therapies for psoriasis and conducted a bibliometric analysis from 1993 to 2023 using a predictive linear regression model. This included a comprehensive statistical and visual evaluation of each model's validity, literature profiles, citation patterns, and collaborations, assessing R variance and mean squared error (MSE). Furthermore, we detailed the structural features and penetration pathways of emerging drug delivery systems for topical treatment, such as lipid-based, polymer-based, metallic nanocarriers, and nanocrystals, highlighting their advantages. This systematic overview indicates that future research should focus on developing novel drug delivery systems characterized by enhanced stability, biocompatibility, and drug-carrying capacity.

Evaluation of Emulgel and Nanostructured Lipid Carrier-Based Gel Formulations for Transdermal Administration of Ibuprofen: Characterization, Mechanical Properties, and Ex-Vivo Skin Permeation

In transdermal applications of nonsteroidal anti-inflammatory drugs, the rheological and mechanical properties of the dosage form affect the performance of the drug. The aim of this study to develop emulgel and nanostructured lipid carrier NLC-based gel formulations containing ibuprofen, evaluate their mechanical properties, bioadhesive value and ex-vivo rabbit skin permeability. All formulations showed non-Newtonian pseudoplastic behavior and their viscosity values are suitable for topical application. The particle size of the nanostructured lipid carrier system was found to be 468 ± 21 nm, and the encapsulation efficiency was 95.58 ± 0.41%. According to the index of viscosity, consistency, firmness, and cohesiveness values obtained as a result of the back extrusion study, E2 formulation was found to be more suitable for transdermal application. The firmness and work of shear values of the E2 formulation, which has the highest viscosity value, were also found to be the highest and it was chosen as the most suitable formulation in terms of the spreadability test. The work of bioadhesion values of NLC-based gel and IBU-loaded NLC-based gel were found as 0.226 ± 0.028 and 0.181 ± 0.006 mJ/cm2 respectively. The percentages of IBU that penetrated through rabbit skin from the Ibuactive-Cream and the E2 were 87.4 ± 2.11% and 93.4 ± 2.72% after 24 h, respectively. When the penetration of ibuprofen through the skin was evaluated, it was found that the E2 formulation increased penetration due to its lipid and nanoparticle structure. As a result of these findings, it can be said that the NLC-based gel formulation will increase the therapeutic efficacy and will be a good alternative transdermal formulation.

Advancements in the Transdermal Drug Delivery Systems Utilizing Microemulsion-based Gels

Microemulsion gel, as a promising transdermal nanoparticle delivery system, addresses the limitations of microemulsions and enhances their performance in drug delivery and release. This article aims to discuss the advantages of microemulsion gel, including improved drug bioavailability, reduced drug irritation, enhanced drug penetration and skin adhesion, and increased antimicrobial properties. It explores the methods for selecting microemulsion formulations and the general processes of microemulsion preparation, as well as commonly used oil phases, surfactants, and co-surfactants. Additionally, the biomedical applications of microemulsion gel in treating conditions, such as acne and psoriasis, are also discussed. Overall, this article elucidates the significant potential of microemulsion gel in topical drug delivery, providing insights into future development and clinical applications.

Advance and Challenges in the Treatment of Skin Diseases with the Transdermal Drug Delivery System

Skin diseases are among the most prevalent non-fatal conditions worldwide. The transdermal drug delivery system (TDDS) has emerged as a promising approach for treating skin diseases, owing to its numerous advantages such as high bioavailability, low systemic toxicity, and improved patient compliance. However, the effectiveness of the TDDS is hindered by several factors, including the barrier properties of the stratum corneum, the nature of the drug and carrier, and delivery conditions. In this paper, we provide an overview of the development of the TDDS from first-generation to fourth-generation systems, highlighting the characteristics of each carrier in terms of mechanism composition, penetration method, mechanism of action, and recent preclinical studies. We further investigated the significant challenges encountered in the development of the TDDS and the crucial significance of clinical trials.

Qbd-Based Approach to Optimize Niosomal Gel of Levosulpiride for Transdermal Drug Delivery

Poor aqueous solubility besides extensive hepatic first effect significantly decreases the oral absorption of levosulpiride, which in turn minimizes its therapeutic effectiveness. Niosomes have been extensively investigated as a transdermal vesicular nanocarrier to increase the delivery of low permeable compounds into and across the skin. This research work was to design, develop and optimize levosulpiride-loaded niosomal gel and to evaluate its prospects for transdermal delivery. The Box-Behnken design was used to optimize niosomes by analyzing the impact of three factors (cholesterol; X1, Span 40; X2, and sonication time; X3) on the responses (particle size, Y1, and entrapment efficiency, Y2). Optimized formulation (NC) was incorporated into gel and evaluated for pharmaceutical properties, drug release study, ex vivo permeation, and in vivo absorption. The design experiment data suggest that all three independent variables influence both response variables significantly (p < 0.01). Pharmaceutical characteristics of NC vesicles showed the absence of drug excipient interaction, nanosize (~102.2 nm), narrow distribution (~0.218), adequate zeta potential (−49.9 mV), and spherical shape, which are suitable for transdermal therapy. The levosulpiride release rates varied significantly (p < 0.01) between niosomal gel formulation and control. Greater flux (p < 0.01) was observed with levosulpiride-loaded niosomal gel than with control gel formulation. Indeed, the drug plasma profile of niosomal gel was significantly higher (p < 0.005), with ~3 folds higher Cmax and greater bioavailability (~500% higher; p < 0.0001) than its counterpart. Overall, these findings imply that the use of an optimized niosomal gel formulation can increase the therapeutic efficacy of levosulpiride and may represent a promising alternative to conventional therapy.

Standardization and quantitative analysis of Araucaria Heterophylla extract via an UPLC-MS/MS method and its formulation as an antibacterial phytonanoemulsion gel

Skin infections are among the bacterial infections that present significant therapeutic challenges due to antibiotic resistance. Recently, herbal products clutched a significant attention as safe replacements for other medications but their low aqueous solubility and poor bioavailability are considered major challenges which could be circumvented via formulation. As a species of genera Araucaria, Araucaria Heterophylla possesses pharmacological activities such as antioxidant and antibacterial actions, and this study aimed to standardize the extract of the plant against 4ʹʹʹmethoxyamentoflavone (as a main component of the extract) through a validated UPLC-MS/MS method and evaluate its antibacterial activity, which was followed by loading the standardized extract into a nanoemulsion to form a phytonanoemulsion (PNE), where the design analysis and optimization were performed through a simplex lattice design. The optimized PNE (PNE 3) was then loaded into HPMC/Pluronic F-127 gel (in ratio 1:4) to sustain the release of the active constituent. The heightened penetrability of PNE 3 gel was visualized via confocal laser scanning microscopy, and its prolonged effect was proved thru an in vivo study conducted on male Wistar rats. A histopathological study revealed the safety of the formulation when applied topically. Thus, PNE gel could be a potentially broad-spectrum antibacterial drug delivery system.

Fabrication, In Vitro, and In Vivo Assessment of Eucalyptol-Loaded Nanoemulgel as a Novel Paradigm for Wound Healing

Wounds are the most common causes of mortality all over the world. Topical drug delivery systems are more efficient in treating wounds as compared to oral delivery systems because they bypass the disadvantages of the oral route. The aim of the present study was to formulate and evaluate in vitro in vivo nanoemulgels loaded with eucalyptol for wound healing. Nanoemulsions were prepared using the solvent emulsification diffusion method by mixing an aqueous phase and an oil phase, and a nanoemulgel was then fabricated by mixing nanoemulsions with a gelling agent (Carbopol 940) in a 1:1 ratio. The nanoemulgels were evaluated regarding stability, homogeneity, pH, viscosity, Fourier-transform infrared spectroscopy (FTIR), droplet size, zeta potential, polydispersity index (PDI), spreadability, drug content, in vitro drug release, and in vivo study. The optimized formulation, F5, exhibited pH values between 5 and 6, with no significant variations at different temperatures, and acceptable homogeneity and spreadability. F5 had a droplet size of 139 ± 5.8 nm, with a low polydispersity index. FTIR studies showed the compatibility of the drug with the excipients. The drug content of F5 was 94.81%. The percentage of wound contraction of the experimental, standard, and control groups were 100% ± 0.015, 98.170% ± 0.749, and 70.846% ± 0.830, respectively. Statistically, the experimental group showed a significant difference (p < 0.03) from the other two groups. The results suggest that the formulated optimized dosage showed optimum stability, and it can be considered an effective wound healing alternative.

Cyclosporine and Pentoxifylline laden Tailored Niosomes for the effective management of Psoriasis: In-vitro Optimization, Ex-vivo and Animal Study

Psoriasis is a chronic skin inflammatory auto-immune disorder. Cyclosporine is the drug of choice in severe cases of psoriasis for systemic administration. But its systemic administration leads to some serious side effects like nephrotoxicity and cardiovascular disorders. Pentoxifylline is reported to reduce such side effects of cyclosporine and also it is found useful in the management of psoriasis. In this study, Box-Behnken design was used to prepare and optimize Cyclosporine and Pentoxifylline loaded niosomes. The optimized niosomes were prepared using cholesterol and surfactant (7:3), a total of 500µmol. Ratio of Tween 80 to span 80 for the preparation of optimized niosome was 0.503 (tween80:span80), and hydration and sonication time were kept at 60 minutes and 10 minutes, respectively. Size, Poly Dispersity Index, zeta potential, and % entrapment efficiency of Pentoxifylline and cyclosporine, for optimized niosomes were found to be 179nm, 0.285, -37.5mV, 84.6%, and 75.3%, respectively. The optimized niosomes were further studied for in-vitro skin permeation and skin deposition. Though niosomes significantly influenced the permeation of both drugs, only a small amount of drug (both cyclosporine and Pentoxifylline) was permeated through the skin. In comparison with the permeation, the quantity of drug retained in the stratum corneum and viable epidermis (SC and VED) was very high. In the in-vivo studies conducted on mice induced with psoriasis using imiquimod, both the histopathology and psoriasis area severity index has shown marked improvement in the skin condition of mice treated with niosomes loaded with Pentoxifylline and cyclosporine, in comparison with the solution/suspension of individual drugs. The study shows that niosomes could be effectively used for the simultaneous delivery of cyclosporine and Pentoxifylline for the better management of psoriasis.

Topical non-aqueous nanoemulsion of Alpinia galanga extract for effective treatment in psoriasis: in vitro and in vivo evaluation

Non-aqueous nanoemulsion (NANE) of Alpinia galanga extract (AGE) was prepared using Palmester 3595 (MCT oil) as oil phase, Cremophor RH 40-Transcutol P® as surfactant-co-surfactant (S_mix), and glycerin as non-aqueous polar continuous phase. The composition was optimized by applying three-level, four factor Box-Behnken design (BBD). The mean droplet size and zeta potential of the optimized AGE NANE was found to be 60.81 ± 18.88 nm and -7.99 ± 4.14 mV, respectively. The ex vivo permeation studies of AGE NANE and AGE per se on porcine skin reported flux of 125.58 ± 8.36 µg/cm² h^-1 and 12.02 ± 1.64 µg/cm²h^-1, respectively. Therefore, the enhancement ratio has shown 10-folds increase in the flux for AGE NANE when compared to extract per se. Later, confocal laser scanning microcopy confirmed that AGE NANE were able to penetrate into skin's stratum by trans-follicular transport mechanism. The stability studies of AGE NANE confirmed its stability at 30 ± 2℃ /75 ± 5 % RH and 5 ± 3℃. The efficacy of AGE NANE was evaluated in vivo on imiquimod (IMQ) induced mouse model. The mice treated with low and high doses of AGE NANE (groups VI and VII) showed significant (p<0.05) amelioration of psoriasis. Results of histopathology indicated reduction in psoriasis area severity index in AGE NANE treated mice (group VI and group VII).

In vitro and in vivo evaluation of a novel lidocaine-loaded cubosomal gel for prolonged local anesthesia

Marketed lidocaine dosage forms (such as ointment, gels, and injections) used to manage acute and chronic pain showed a short duration of action (<2 h). In this study, a lidocaine-loaded cubosomal gel was prepared to sustain the release of lidocaine to prolong the local anesthetic effect (high drug retention in the skin). Lidocaine-loaded cubosomal gels were prepared by melt emulsification and sonication using Pluronic F127 and DL-α-monoolein (at different levels). The cubosomal gels were characterized by morphology, size, zeta potential, entrapment efficacy, assay, viscosity, pH, and texture profiles. Ex vivo lidocaine permeation and retention studies were performed using Sprague–Dawley rat skin. Transmission electron microscopy images confirmed the bi-continuous liquid crystalline phase with a honeycomb cubosome structure. The cubosomal particle size (103–227 nm), viscosity (13,524–15,627cp), and entrapment efficacy (78.4–94.7%) increase with the level of monoolein. The ex-vivo permeation study showed a biphasic release pattern, with lidocaine cleared from ointment within 4 h (97.9% cumulative release), while cubosomal gels showed sustained release up to 24 h (53.33–98.86% cumulative release). A skin retention study demonstrated that cubosomes can increase (up to 28-fold) the lidocaine content in the skin (4.56 mg) compared to ointment (0.19 mg). A rabbit skin irritation study showed no sign of irritation after the application of cubosomal gel. In the radiant heat tail-flick study, the local anesthetic effect of lidocaine from the cubosomal gel was sustained for up to 16 h with 1.43-fold higher efficacy than marketed ointment. In conclusion, the study demonstrated the potential of cubosomal nanoparticle-laden gel to sustain the release of lidocaine for prolonging local anesthetic effects for pain management.

Lipid Nanoparticulate Drug Delivery Systems: Recent Advances in the Treatment of Skin Disorders

The multifunctional role of the human skin is well known. It acts as a sensory and immune organ that protects the human body from harmful environmental impacts such as chemical, mechanical, and physical threats, reduces UV radiation effects, prevents moisture loss, and helps thermoregulation. In this regard, skin disorders related to skin integrity require adequate treatment. Lipid nanoparticles (LN) are recognized as promising drug delivery systems (DDS) in treating skin disorders. Solid lipid nanoparticles (SLN) together with nanostructured lipid carriers (NLC) exhibit excellent tolerability as these are produced from physiological and biodegradable lipids. Moreover, LN applied to the skin can improve stability, drug targeting, occlusion, penetration enhancement, and increased skin hydration compared with other drug nanocarriers. Furthermore, the features of LN can be enhanced by inclusion in suitable bases such as creams, ointments, gels (i.e., hydrogel, emulgel, bigel), lotions, etc. This review focuses on recent developments in lipid nanoparticle systems and their application to treating skin diseases. We point out and consider the reasons for their creation, pay attention to their advantages and disadvantages, list the main production techniques for obtaining them, and examine the place assigned to them in solving the problems caused by skin disorders.

Recent advances in ophthalmic preparations: Ocular barriers, dosage forms and routes of administration

The human eye is a complex organ with unique anatomy and physiology that restricts the delivery of drugs to target ocular tissues/sites. Recent advances in the field of pharmacy, biotechnology and material science have led to development of novel ophthalmic dosage forms which can provide sustained drug delivery, reduce dosing frequency and improve the ocular bioavailability of drugs. This review highlights the different anatomical and physiological factors which affect ocular bioavailability of drugs and explores advancements from 2016 to 2020 in various ophthalmic preparations. Different routes of drug administration such as topical, intravitreal, intraocular, juxtascleral, subconjunctival, intracameral and retrobulbar are discussed with their advances and limitations.

Lipid-based emulsion drug delivery systems - a comprehensive review

Lipid-based emulsion system - a subcategory of emulsion technology, has emerged as an enticing option to improve the solubility of the steadily rising water-insoluble candidates. Along with enhancing solubility, additional advantages such as improvement in permeability, protection against pre-systemic metabolism, ease of manufacturing, and easy to scale-up have made lipid-based emulsion technology very popular among academicians and manufacturers. The present article provides a comprehensive review regarding various critical properties of lipid-based emulsion systems, such as microemulsion, nanoemulsion, SMEDDS (self microemulsifying drug delivery system), and SNEDDS (self nanoemulsifying drug delivery system). The present article also explains in detail the similarities and differences between them, the stabilization mechanism, methods of preparation, excipients used to prepare them, and evaluation techniques. Subtle differences between nearly related terminologies such as microemulsion and nanoemulsion, SMEDDS, and SNEDDS are also explained in detail to clarify the basic differences. The present article also gives in-depth information regarding the chemical structure of various lipidic excipients, various possible chemical modifications to modify their inherent properties, and their regulatory status for rational selection.

A comprehensive review on possibilities of treating psoriasis using dermal cyclosporine

Psoriasis is an autoimmune, chronic proliferative, inflammatory skin disease with high comorbidity. Psoriasis is not a curable disease; it can only be managed. Cyclosporine A (CyA) is one of the FDA-approved immunosuppressant drug used in severe Psoriasis. Till date only oral route is used for its administration. Administration of CyA by this route causes serious side effects such as hypertension and renal toxicity. Due to these side effects, a number of researches have been done and taking place in the current times for the dermal delivery of CyA for the management of psoriasis. Dermal delivery of CyA is not an easy task because of its physiochemical properties like high molecular weight, lipophilicity and resistance offered by stratum corneum (SC). Because of the above problems in the dermal delivery a number of new approaches such as nanolipid carriers, microemulsion, liposomes, niosomes etc. are explored. To those deep findings for psoriasis management with dermal delivery of CyA have not been discussed. This comprehensive review includes all the studies, advancements and their critical findings which took place in the recent times for the dermal delivery of CyA and along with the suitable modification needed for the efficient dermal delivery of CyA are also suggested.

Triptolide laden reduced graphene oxide transdermal hydrogel to manage knee arthritis: in vitro and in vivo studies

Triptolide (extract of herb Tripterygium wilfordii) is widely used in rheumatoid arthritis due to its potent immunosuppressant effect. The marketed oral (tablet dosage forms) and parenteral injections have short duration of action (half-life = 38 min) and not limited to multiorgan toxicity, which restrict the use of triptolide in clinical practice. In this study, a triptolide-loaded Pluronic® F68-reduced graphene oxide transdermal (non-invasive) hydrogel was developed to achieve sustained release of triptolide. Fourier transform infrared spectroscopy, X-ray diffraction, and Raman spectroscopy confirmed the synthesis of Pluronic^® F68-reduced graphene oxide. Transmission electron microscopy showed flat wrinkled-nanosheets. The developed hydrogel showed desirable viscosity (11,261-11,365 cps), adhesiveness (0.25 mJ), hardness (6.5 g), and cohesiveness (1.85) for transdermal application. The ex vivo release study demonstrated the ability of the Pluronic^® F68-reduced graphene oxide hydrogel to prolong release up to 14 h (63.64-96.78%), owing to the strong π-π interactions between the graphene oxide and the triptolide. The in vivo pharmacokinetic parameters in the rat model confirmed the improvement in the relative bioavailability (3.3-fold) with Pluronic^® F68-reduced graphene oxide hydrogel in comparison to the control hydrogel without reduced graphene oxide. The anti-rheumatoid efficacy model suggest the potential application of Pluronic^® F68-reduced graphene oxide hydrogel to treat knee rheumatoid arthritis (70-75% resolution) to substitute tablets and parenteral injections.

Polymeric Gels and Their Application in the Treatment of Psoriasis Vulgaris: A Review

Psoriasis is a chronic skin disease, and it is especially characterized by the occurrence of red, itchy, and scaly eruptions on the skin. The quality of life of patients with psoriasis is decreased because this disease remains incurable, despite the rapid progress of therapeutic methods and the introduction of many innovative antipsoriatic drugs. Moreover, many patients with psoriasis are dissatisfied with their current treatment methods and the form with which the drug is applied. The patients complain about skin irritation, clothing stains, unpleasant smell, or excessive viscosity of the preparation. The causes of these issues should be linked with little effectiveness of the therapy caused by low permeation of the drug into the skin, as well as patients’ disobeying doctors’ recommendations, e.g., concerning regular application of the preparation. Both of these factors are closely related to the physicochemical form of the preparation and its rheological and mechanical properties. To improve the quality of patients’ lives, it is important to gain knowledge about the specific form of the drug and its effect on the safety and efficacy of a therapy as well as the patients’ comfort during application. Therefore, we present a literature review and a detailed analysis of the composition, rheological properties, and mechanical properties of polymeric gels as an alternative to viscous and greasy ointments. We discuss the following polymeric gels: hydrogels, oleogels, emulgels, and bigels. In our opinion, they have many characteristics (i.e., safety, effectiveness, desired durability, acceptance by patients), which can contribute to the development of an effective and, at the same time comfortable, method of local treatment of psoriasis for patients.

Advances in the Application of Natural Products and the Novel Drug Delivery Systems for Psoriasis

Psoriasis, an incurable autoimmune skin disease, is one of the most common immune-mediated disorders. Presently, numerous clinical research studies are underway, and treatment options are available. However, these treatments focus on improving symptoms of the disease and fail to achieve a radical cure; they also have certain toxic side effects. In recent years, natural products have increasingly gained attention because of their high efficiency and low toxicity. Despite their obvious therapeutic effects, natural products’ biological activity was limited by their instability, poor solubility, and low bioavailability. Novel drug delivery systems, including liposomes, lipospheres, nanostructured lipid carriers, niosomes, nanoemulsions, nanospheres, microneedles, ethosomes, nanocrystals, and foams could potentially overcome the limitations of poor water solubility and permeability in traditional drug delivery systems. Thus, to achieve a therapeutic effect, the drug can reach the epidermis and dermis in psoriatic lesions to interact with the immune cells and cytokines.

Design and evaluation of microemulsion-based efinaconazole formulations for targeted treatment of onychomycosis through transungual route: Ex vivo and nail clipping studies

The onychomycosis treatment remains a big challenge for onychologist due to the shorter nail residence time of topical formulations and the lack of availability of novel formulations in markets for new generation antifungal drugs. The objective of this work was to design, develop, optimize, and evaluate microemulsion formulations for effective delivery of efinaconazole through transungual route in onychomycosis treatment. Capmul® MCM (Glyceryl Caprylate/Caprate) as oil, Labrasol® (caprylocaproyl polyoxyl-8 glycerides) as a surfactant, and Transcutol® P (diethylene glycol monoethyl ether) as co-surfactant exhibited higher solubility of efinaconazole and surfactant-cosurfactant mixture (Smix) in a ratio of 1:1 rendered higher microemulsion region in the pseudo-ternary phase diagram. The optimized microemulsion formulation containing 6%w/w oil phase, 22.5%w/w surfactant, 22.5%w/w co-surfactant, and 49%w/w demineralized water was converted into gel formulation using 1.0%w/w Carbopol® 934 P gelling agent and evaluated for stability of 6 months. The optimized microemulsion formulation globule size was less than 100 nm. The ex vivo permeation confirmed improved permeation of efinaconazole from microemulsion formulations (346.36±12.90μgcm^-2) in comparison to reference formulation without observing any lag in drug permeation through the nail plate. The in vitro antifungal study data indicated increased antifungal efficacy relative to efinaconazole topical solution against Trichophyton rubrum, Trichophyton mentagrophytes, and Candida albicans species. Further, an in vitro cell cytotoxicity study exhibited no toxic effect for any excipients used in the formulation while applied on nail cells. Hence, the efinaconazole loaded microemulsion formulations could be considered as an effective therapy in the treatment of onychomycosis.

Recent Advances in Nanomaterials for Dermal and Transdermal Applications

The stratum corneum, the most superficial layer of the skin, protects the body against environmental hazards and presents a highly selective barrier for the passage of drugs and cosmetic products deeper into the skin and across the skin. Nanomaterials can effectively increase the permeation of active molecules across the stratum corneum and enable their penetration into deeper skin layers, often by interacting with the skin and creating the distinct sites with elevated local concentration, acting as reservoirs. The flux of the molecules from these reservoirs can be either limited to the underlying skin layers (for topical drug and cosmeceutical delivery) or extended across all the sublayers of the epidermis to the blood vessels of the dermis (for transdermal delivery). The type of the nanocarrier and the physicochemical nature of the active substance are among the factors that determine the final skin permeation pattern and the stability of the penetrant in the cutaneous environment. The most widely employed types of nanomaterials for dermal and transdermal applications include solid lipid nanoparticles, nanovesicular carriers, microemulsions, nanoemulsions, and polymeric nanoparticles. The recent advances in the area of nanomaterial-assisted dermal and transdermal delivery are highlighted in this review.

Nose to brain delivery of tailored clozapine nanosuspension stabilized using (+)-alpha-tocopherol polyethylene glycol 1000 succinate: Optimization and in vivo pharmacokinetic studies

Clozapine is widely used to treat schizophrenia as an atypical antipsychotic. Low solubility, poor dissolution rate, degradation in the gastrointestinal tract, high hepatic first-pass metabolism, and eventually less drug transfer in the brain are all issues with oral clozapine administration. On account of this poor pharmacokinetic parameters, the authors aimed to develop clozapine nanosuspension using (+)-alpha-tocopherol polyethylene glycol 1000 succinate (TPGS) and polyvinylpyrrolidone K-30 (PVP K-30) and deliver it through the intranasal route. The nanosuspension was prepared by the high-speed homogenization method with 3² full factorial design for optimization of the product. Quality Target Product Profile (QTPP) was enlisted before the product development. The amount of TPGS and speed of homogenizer were selected as independent variables whereas, particle size and drug permeation profile after 24 h (Y₂, %) were selected as dependent variables. As per the results of optimization, amount of TPGS and speed of homogenizer were chosen as 0.1% and 7000 rpm, respectively. The particle size of the optimized nanosuspension of clozapine was found to be 281 nm. The conversion of clozapine crystals to an amorphous form was verified by characterization studies (XRD and DSC). The drug permeability study showed 96.15% and 41.12% clozapine release after 24 h from nanosuspension and conventional suspension, respectively. The study of nasal cilio-toxicity (histopathological studies) demonstrated the appropriateness of nanosuspension for intranasal purposes. The single-dose in vivo pharmacokinetic analysis in the rat model showed a substantial increase in the therapeutic concentration of clozapine in the brain tissue in the case of intranasal nanosuspension (dose = 0.05 mg drug/0.1 mL, C_max = 8.62 ± 0.45 μg/g, t_max = 1 h) compared to conventional oral clozapine suspension (dose = 26.43 mg drug/0.158 mL, C_max = 1.14 ± 0.12 μg/g, t_max = 1 h).Ultimately, in the case of an intranasal route, a 3.56-fold increase in brain drug concentration was observed with a 528-fold lower drug dose compared with oral administration. The results suggest that clozapine nanosuspension may be used for successful nose-to-brain delivery.

Tailored Doxycycline Hyclate Loaded In Situ Gel for the Treatment of Periodontitis: Optimization, In Vitro Characterization, and Antimicrobial Studies

Currently, periodontitis is treated by oral dosage forms (antibiotics) which shows systemic side effects and failed to reach the therapeutic concentration (above minimum inhibitory concentration, MIC) in the periodontal pocket. The present study aimed to overcome the above issues, by designing tailored doxycycline hyclate laden in situ gel by Poloxamer 407, chitosan, and polyethylene glycol 600. The in situ gel-forming system has attracted attention owing to its ability of sustained drug release above MIC, easy administration (syringeability), and high drug retention (localization) in the periodontal cavity. The Box-Behnken design (BBD) was used to tailor and optimize the concentration of Poloxamer 407 (X₁ = 14.3%), chitosan (X₂ = 0.58%), and polyethylene glycol 600 (X₃ = 1.14%) to achieve sufficient syringeability (149 N), t_90% (1105 min), and viscosity at non-physiological condition (512 cps) and physiological condition (5415 cps). The optimized in situ gel was clear and isotonic (RBCs test). The gelation temperature of the optimized in situ was 34 ± 1°C with sufficient mucoadhesive strength (26 ± 2 dyn/cm²), gel strength (29 ± 2 sec), and texture profile for periodontal application. The in vitro drug release studies showed sustain release from optimized in situ gel (24h) in comparison to marketed gel (7h). The antimicrobial activity (cup plate technique) of the in situ gel was equivalent to the marketed doxycycline gel, which suggests that the doxycycline hyclate retained its antimicrobial efficacy when formulated as in situ gelling system. In conclusion, BBD was effectively utilized to optimize in situ gel with minimum level of polymers to achieve the required characteristics of the in situ gel for sustaining drug delivery to treat periodontitis.

Transdermal delivery of buprenorphine from reduced graphene oxide laden hydrogel to treat osteoarthritis

The patients with chronic pain in osteoarthritis often have insufficient pain relief from non-opioids analgesics. Buprenorphine is a promising molecule for symptomatic relief of chronic pain. The marketed parenteral injections and sublingual tablets have short duration of action (half-life = 2.7 h), which is not suitable to manage chronic pain. The purpose of this research was to design buprenorphine-loaded Pluronic F127-reduced graphene oxide transdermal (noninvasive) hydrogel to achieve sustained release of buprenorphine to manage chronic pain in osteoarthritis. Pluronic F127 was used to stabilize the reduced graphene oxide in hydrogel system. The characterization studies including Fourier transform infrared spectroscopy, X-ray diffraction, and Raman spectroscopy confirmed the synthesis of Pluronic F127-reduced graphene oxide from graphite. The transmission electron microscopy image showed flat nanosheets of reduced graphene oxide (rGO). The developed hydrogel showed desirable pH, viscosity, adhesiveness, hardness, and cohesiveness for transdermal application. The ex vivo release study demonstrated the ability of the Pluronic F127-reduced graphene oxide (P-rGO) hydrogel to prolong release up to 14 days, owing to the strong π-π interactions between the graphene oxide (GO) and the buprenorphine. In cold ethanol tail flick model, the GO hydrogel showed sustained analgesic effect in comparison with hydrogel without rGO. Thus, this study demonstrated the potential of using Pluronic F127-reduced graphene oxide nanocarriers to prolong local analgesia for effective management for chronic pain.

Optimization of propofol loaded niosomal gel for transdermal delivery

Propofol is an oily liquid widely used for rapid onset of anaesthesia via intravenous route, which shows major limitations of hypersensitivity, anaphylactic reactions and pain. The aim of the present work was to bypass the above issues by formulating tailored niosomal gel to deliver propofol via non-invasive transdermal route. The niosomes were prepared by film hydration method and sonication using cholesterol and Span 80. The Box Behnken design (BBD) was applied to optimize the size (93.5 nm) and the entrapment efficacy (81.5%) of the niosomes by selecting cholesterol at 139 mg, Span 80 at 0.525% and sonication time at 5.13 min. The scanning electron microscopy image showed spherical shape niosomes with smooth surface without aggregation. The ex vivo release data showed significant improvement in the propofol release (92.2% after 10 h) using niosomes in comparison to the control propofol gel (with 30% methanol) without niosomes (25.3% after 10 h). The in vivo pharmacokinetic parameters in the rat model confirmed the improvement in the relative bioavailability with optimized niosomal gel (relative bioavailability = 12.12) in comparison to the control propofol gel. In conclusion, the niosomal gel offered a potential alternative non-invasive route to deliver propofol for procedural sedation especially in pediatric population.

Oral Bioavailability Improvement of Tailored Rosuvastatin Loaded Niosomal Nanocarriers to Manage Ischemic Heart Disease: Optimization, Ex Vivo and In Vivo Studies

Rosuvastatin is an efficient antihyperlipidemic agent; however, being a BCS class II molecule, it shows poor oral bioavailability of < 20%. The present study focused on the improvement of oral bioavailability of rosuvastatin using tailored niosomes. The niosomes were prepared by film hydration method and sonication using cholesterol and Span 40. The Box-Behnken design (BBD) was applied to optimize the size (98 nm) and the entrapment efficacy (77%) of the niosomes by selecting cholesterol at 122 mg, Span 40 at 0.52%, and hydration time at 29.88 min. The transmission electron microscopy image showed spherical shape niosomes with smooth surface without aggregation. The ex vivo intestinal permeability studies showed significant improvement in the rosuvastatin permeation (95.5% after 2 h) using niosomes in comparison to the rosuvastatin suspension (40.1% after 2 h). The in vivo pharmacokinetic parameters in the rat model confirmed the improvement in the oral bioavailability with optimized rosuvastatin loaded niosomes (relative bioavailability = 2.01) in comparison to the rosuvastatin suspension, due to high surface area of niosomes and its lymphatic uptake via transcellular route. In conclusion, the optimized rosuvastatin loaded niosomes offers a promising approach to improve the oral bioavailability of rosuvastatin.

Lidocaine-loaded reduced graphene oxide hydrogel for prolongation of effects of local anesthesia: In vitro and in vivo analyses

Lidocaine is widely used as a local anesthetic for alleviation of post-operative pain and for management of acute and chronic painful conditions. Although several approaches are currently used to prolong the duration of action, an effective strategy to achieve neural blockage for several hours remains to be identified. In this study, a lidocaine-loaded Pluronic® F68-reduced graphene oxide hydrogel was developed to achieve sustained release of lidocaine. Fourier transform infrared spectroscopy, X-ray diffraction, and Raman spectroscopy confirmed the synthesis of Pluronic® F68-reduced graphene oxide. Transmission electron microscopy showed wrinkled, flat nanosheets with micelles attached. The developed hydrogel showed desirable pH, viscosity, adhesiveness, hardness, and cohesiveness for topical application. The ex vivo release study demonstrated the ability of the Pluronic® F68-reduced graphene oxide hydrogel to prolong release up to 10 h, owing to the strong π-π interactions between the graphene oxide and the lidocaine. In comparison with a commercial lidocaine ointment, the developed graphene oxide hydrogel showed sustained anesthetic effect in the radiant heat tail flick test and sciatic nerve block model. Thus, this study demonstrates the potential of using Pluronic® F68-reduced graphene oxide nanocarriers to realize prolonged effects of local anesthesia for effective pain management.

Sustained release of tulobuterol from graphene oxide laden hydrogel to manage asthma

Bronchial asthma is a chronic disease which is currently treated using various inhalants. However, the medication adherence with the inhalants is poor due to complex procedure to use them along with frequent dosing. In this paper, we have developed tulobuterol loaded Pluronic® F127-reduced graphene oxide transdermal hydrogel to sustain the release of tulobuterol to manage asthma for days. The synthesis of Pluronic^® F127-reduced graphene oxide was confirmed by Fourier transform infrared spectroscopy, X-ray diffraction, and Raman spectroscopy. The transmission electron microscope showed wrinkled flat nano sheets. The hydrogel showed sufficient mechanical properties for topical application and was safe in the skin irritation study (rabbit model). The ex vivo release data demonstrated the ability of reduced graphene oxide to sustain the release of tulobuterol for 72 h, due to strong π-π interaction between drug and graphene oxide. The pharmacokinetic profile in Sprague-Dawley rat model confirmed the potential of tulobuterol-Pluronic^® F127-reduced graphene oxide hydrogel to sustain the release of tulobuterol for effective management of asthma.

RETRACTED: Pluronic® F127 stabilized reduced graphene oxide hydrogel for the treatment of psoriasis: In vitro and in vivo studies

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editors. Significant similarities were noticed post-publication between this article and an article submitted to the journal on the same day, by an apparently unrelated research group: Hui Li, Yanlu Jia and Chunling Liu, Colloids and Surfaces B: Biointerfaces 195 (2020) 111259 https://doi.org/10.1016/j.colsurfb.2020.111259. Moreover, the authors did not respond to the journal request to comment on these similarities and to provide the raw data, and the Editors decided to retract the article. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and genuine. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. Although this article was published earlier than the article from Colloids and Surfaces B: Biointerfaces 195 (2020) 111259, the Editors decided to retract this article given the concerns on the reliability of the data.

RETRACTED: Pluronic® F127 stabilized reduced graphene oxide hydrogel for transdermal delivery of ondansetron: Ex vivo and animal studies

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editors. Significant similarities were noticed post-publication between this article and an article submitted to the journal on the same day, by an apparently unrelated research group: Qiang Li, Fangmei Li, Xixi Qi, Fuqiao Wei, Hongxiao Chen and Ting Wang, Colloids and Surfaces B: Biointerfaces 195 (2020) 111246 https://doi.org/10.1016/j.colsurfb.2020.111246. Moreover, the authors did not respond to the journal request to comment on these similarities and to provide the raw data, and the Editors decided to retract the article. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and genuine. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

RETRACTED: Sustained delivery of epalrestat to the retina using PEGylated solid lipid nanoparticles laden contact lens

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. Significant similarities were noticed post-publication between this article and an article submitted to the Journal of Drug Delivery Science and Technology on the same day, by an apparently unrelated research group: Tong Zhang, Tianhui Zhu, Fanyin Wang, Ling Peng and Mingying Lai 60 (2020) 101949 https://doi.org/10.1016/j.jddst.2020.101949 Moreover, the authors did not respond to the journal request to comment on these similarities and to provide the raw data, and the Editor-in-Chief decided to retract the article. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and genuine. As such this article represents a severe abuse of the scientific publishing system.

In vitro and in vivo studies of micro-depots using tailored microemulsion for sustained local anaesthesia

In clinical practice, lidocaine is used as local anesthetic for the management of post-operative pain. The commercial formulation including gels, injections and ointments showed short duration of action (1 to 2 h). In this paper, the efforts have being made to develop tailored lidocaine-microemulsion (o/w), which on penetration in the skin layer cause micro-depots formation due to destabilization of the microemulsion system. To identify the microemulsion region, pseudo ternary diagrams were constructed using Capmul MCM as oil, Pluronic F68 as tri-block surfactant, polyethylene glycol 200 as co-surfactant at 1:4 and 1:6 ratios (S:Co-S). The selected 5%w/v lidocaine loaded microemulsion [Ld-ME-2(1:4)] was stable in thermodynamic test and during shelf life period (3 months). In ex vivo permeability study, the lidocaine release from Ld-ME-2(1:4) microemulsion was sustained in comparison to the marketed lidocaine ointment. The skin irritation study confirmed the safety of lidocaine loaded microemulsion. Tail flick test showed improved and sustain local anaesthetic effect in comparison to the market ointment. The improved efficacy of microemulsion system, was due to high penetration in the skin layer due to local precipitation of lidocaine from microemulsion. The findings suggest that the tailored microemulsion could be a potential strategy to prolong the local anaesthesia.