Characterization of protein therapeutics by mass spectrometry: recent developments and future directions

FAST MS: Software for the Automated Analysis of Top-Down Mass Spectra of Polymeric Molecules Including RNA, DNA, and Proteins

Top-down mass spectrometry (MS) enables comprehensive characterization of modified proteins and nucleic acids and, when native electrospray ionization (ESI) is used, binding site mapping of their complexes with native or therapeutic ligands. However, the high complexity of top-down MS spectra poses a serious challenge to both manual and automated data interpretation, even when the protein, RNA, or DNA sequence and the type of modification or the ligand are known. Here, we introduce FAST MS, a user-friendly software that identifies, assigns and relatively quantifies signals of molecular and fragment ions in MS and MS/MS spectra of biopolymers with known sequence and provides a toolbox for statistical analysis. FAST MS searches mass spectra for ion signals by comparing all signals in the spectrum with isotopic profiles calculated from known sequences, resulting in superior sensitivity and an increased number of assigned fragment ions compared to algorithms that rely on artificial monomer units while maintaining the false positive rate on a moderate level (<5%). FAST MS is an open-source, cross-platform software for the accurate identification, localization and relative quantification of modifications, even in complex mixtures of positional isomers of proteins, oligonucleotides, or any other user-defined linear polymer.

Differentiation of Aspartic and Isoaspartic Acid Using 193 nm Ultraviolet Photodissociation Mass Spectrometry

Spontaneous conversion of aspartic acid (Asp) to isoaspartic acid (isoAsp) is a ubiquitous modification that influences the structure and function of proteins. This modification of Asp impacts the stability of biotherapeutics and has been linked to the development of neurodegenerative diseases. We explored the use of 193 nm ultraviolet photodissociation (UVPD) to distinguish Asp and isoAsp in the protonated and deprotonated peptides. The differences in the relative abundances of several fragment ions uniquely generated by UVPD were used to differentiate isomeric peptide standards containing Asp or isoAsp. These fragment ions result from the cleavage of bonds N-terminal to Asp/isoAsp residues in addition to the side-chain losses from Asp/isoAsp or the losses of COOH, CO2, CO, or H2O from y-ions. Fragmentation of Asp-containing tryptic peptides using UVPD resulted in more enhanced w/w + 1/y - 1/x ions, while isoAsp-containing peptides yielded more enhanced y - 18/y - 45/y - 46 ions. UVPD was also used to identify an isomerized peptide from a tryptic digest of a monoclonal antibody. Moreover, UVPD of a protonated nontryptic peptide resulted in more enhanced y ions N- and C-terminal to isoAsp and differences in b/y ion ratios that were used to identify the isoAsp peptide.

Ultra-High-Throughput and Low-Volume Analysis of Intact Proteins with LAP-MALDI MS

High-throughput (HTP) mass spectrometry (MS) is a rapidly growing field, with many techniques evolving to accommodate ever increasing sample analysis rates. Many of these techniques, such as AEMS and IR-MALDESI MS, require volumes of at least 20-50 μL for analysis. Here, liquid atmospheric pressure-matrix-assisted laser desorption/ionization (LAP-MALDI) MS is presented as an alternative for ultra-high-throughput analysis of proteins requiring only femtomole quantities of protein in 0.5 μL droplets. By moving a 384-well microtiter sample plate with a high-speed XY-stage actuator, sample acquisition rates of up to 10 samples per second have been achieved at a data acquisition rate of 200 spectra per scan. It is shown that protein mixture solutions with concentrations of ≤2 μM can be analyzed at this speed, while individual protein solutions can be analyzed at concentrations of ≤0.2 μM. Thus, LAP-MALDI MS provides a promising platform for multiplexed HTP protein analysis.

A novel peptide design aids in the expression and its simplified process of manufacturing of Insulin Glargine in Pichia pastoris

Manufacturing of insulin and its analogues relied upon in vitro enzymatic cleavages of its precursor forms (single chain precursor, SCP) at both ends of a connecting peptide (C-peptide) that links the respective B-chain and A-chains to corresponding final forms. We have demonstrated a simplified approach of cleaving P. pastoris expressed SCP, distinctly at one site for conversion to insulin glargine. The design of the precursor was made in such a way that there is no C-peptide in the precursor which needs to be removed in the final product. Instead of traditional both side cleavage of the C-peptide and removing the C-peptide (by trypsin), followed by 2nd enzyme reaction (typically carboxipeptidase B), present work established only one side cleavage of the sequence by only trypsin converts the precursor to final insulin glargine product. The novel design of the precursor helped in producing insulin glargine in a single step with an application of single enzyme brought high degree of process efficiencies. Highly purified product was generated through two reversed phase high pressure chromatographic steps. Purified product was compared with the reference product Lantus®, for various physico-chemical and biological properties. Primary, secondary and tertiary structures as well as biological pharmaco-dynamic effects were found comparable. High cell density fermentation that gave a good yield of the SCP, a single step conversion to insulin glargine, enabled by a unique design of SCP and a distinct purification approach, has led to a simplified and economical manufacturing process of this important drug used to treat diabetes. KEY POINTS: • Novel concept for processing single chain precursor of insulin glargine • Simple and economic process for insulin glargine • Physicochemical characterization and animal Pharmacodynamics show similarity to Lantus.

Targeting the hydrophilic regions of recombinant proteins by MS via in-solution buffer-free trypsin digestion

A desalting step using reversed phase chromatography is a common practice prior to mass spectrometry analysis of proteolytic digests in spite of the detrimental exclusion of the hydrophilic peptides. The detection of such peptides is also important for the complete coverage of protein sequences and the analysis of posttranslational modifications as inquired by regulatory agencies for the commercialization of biotechnological products. The procedure described here, named in-solution buffer-free digestion, simplifies the sample processing and circumvents the above-mentioned limitations by allowing the detection of tryptic hydrophilic peptides via direct ESI-MS analysis. Two DNA recombinant proteins such as HBcAg (hepatitis B core antigen) and fusion VEGF (vascular endothelial growth factor) were analyzed with the proposed in-solution buffer-free digestion allowing the detection of extremely hydrophilic di-, tri- and tetra-peptides, C-terminal His-tail peptide, as well as disulfide-containing peptides. All these molecular species are hardly seen in mass spectrometric analysis using a standard digestion that includes a C18-desalting step. The procedure was also successfully tried on hydrophilic tetra- and hexa-peptides of Ribonuclease B carrying an N-glycosylation site occupied with "high-mannose" N-glycan chains. The in-solution buffer-free digestion constitutes a simple and straightforward approach to analyse the hydrophilic proteolytic peptides which are commonly elusive to the detection by conventional mass spectrometric analysis.

Recent advancements, challenges, and practical considerations in the mass spectrometry-based analytics of protein biotherapeutics: A viewpoint from the biosimilar industry

The extensive analytical characterization of protein biotherapeutics, especially of biosimilars, is a critical part of the product development and registration. High-resolution mass spectrometry became the primary analytical tool used for the structural characterization of biotherapeutics. Its high instrumental sensitivity and methodological versatility made it possible to use this technique to characterize both the primary and higher-order structure of these proteins. However, even by using high-end instrumentation, analysts face several challenges with regard to how to cope with industrial and regulatory requirements, that is, how to obtain accurate and reliable analytical data in a time- and cost-efficient way. New sample preparation approaches, measurement techniques and data evaluation strategies are available to meet those requirements. The practical considerations of these methods are discussed in the present review article focusing on hot topics, such as reliable and efficient sequencing strategies, minimization of artefact formation during sample preparation, quantitative peptide mapping, the potential of multi-attribute methodology, the increasing role of mass spectrometry in higher-order structure characterization and the challenges of MS-based identification of host cell proteins. On the basis of the opportunities in new instrumental techniques, methodological advancements and software-driven data evaluation approaches, for the future one can envision an even wider application area for mass spectrometry in the biopharmaceutical industry.

A multianalytical approach to investigate the effect of nanofiltration on plasma-derived factor IX clinical lots

Plasma-derived proteins are a subset of relevant biotherapeutics also known as "well-characterized biologicals". They are enriched from plasma through several steps of physical and biochemical methodologies, reaching the regulatory accepted standards of safety, levels of impurities, activity and lot-to-lot consistency. Final products accepted for commercialization are submitted to tight analytical, functional and safety controls by a number of different approaches that fulfill the requirements of sensitivity and reliability. We report here the use of a multianalytical approach for the comparative evaluation of different lots of Factor IX isolated from plasma preparations and submitted or not to a step of nanofiltration. The approach include, among the other, proteomic techniques based on both MALDI-TOF and LC-MS Orbitrap mass spectrometry, circular dichroism for structural characterization, chromatographic and electrophoretic techniques, ELISA and functional assays based on clotting activity and binding to known anticoagulants. Comparative data obtained on two sets of nanofiltered and non-nanofiltered lots with different final activity show that the products have substantially overlapping profiles in terms of activity, contaminants, structural properties and protein content, suggesting that the proposed multianalytical approach is robust enough to be used for the routine validation of clinical lots.

Ultra-performance liquid chromatography/multiple reaction monitoring mass spectrometry quantification of trastuzumab in human serum by selective monitoring of a specific peptide marker from the antibody complementarity-determining regions

RATIONALE

Because of the large molecular weight, the structural complexity and the similarity with endogenous immunoglobulins present in high concentrations, in vivo quantitative studies with therapeutic monoclonal antibodies are particularly challenging. In this work, an UPLC/MRM MS-based methodology is described for the quantification of trastuzumab in human serum by monitoring a novel specific peptide marker located within its heavy chain Complementarity-Determining Region (CDR).

METHODS

For maximum sensitivity and selectivity, specific transitions of this diagnostic proteotypic peptide were optimized and monitored at m/z 364.1 → 437.3 (quantitation ion) and m/z 364.1 → 358.0 (confirmation ion). As a proof-of-concept, the methodology was applied to the determination of trastuzumab in human serum over a clinically relevant range from 0.02 to 200 μg/mL. The methodology has been evaluated in terms of specificity, linearity, accuracy, precision, detection and quantitation limits.

RESULTS

An excellent linear response has been obtained in the range from 0.036 to 3.6 fmol/μL for the standard peptide and from 0.03 to 285 fmol/μL for the trastuzumab in human serum with typical R² values of 0.99. The limit of detection (LOD) and limit of quantification (LOQ) are 0.005 fmol/μL and 0.05 fmol/μL, respectively, with mean bias and RSD values of 18% and 1%, respectively, for quality control samples.

CONCLUSIONS

The strategy used to set up the UPLC/MRM MS methodology based on monitoring specific peptide markers within CDRs can be potentially applied to the detection and quantification of other humanized or human mAbs in biological fluids. Copyright © 2017 John Wiley & Sons, Ltd.

Orthogonal Mass Spectrometry-Based Footprinting for Epitope Mapping and Structural Characterization: The IL-6 Receptor upon Binding of Protein Therapeutics

Higher-order structure (HOS) is a crucial determinant for the biological functions and quality attributes of protein therapeutics. Mass spectrometry (MS)-based protein footprinting approaches play an important role in elucidating the relationship between protein biophysical properties and structure. Here, we describe the use of a combined method including hydrogen-deuterium exchange (HDX), fast photochemical oxidation of proteins (FPOP), and site-specific carboxyl group footprinting to investigate the HOS of protein and protein complexes. The work focuses on implementing complementary solution-phase footprinting approaches that differ in time scale, specificity for protein residue side chains vs backbone as well as selectivity for different residue types to map integratively the epitope of human interleukin-6 receptor (IL-6R) for two adnectins with distinct affinities (Kd, Adnectin1 ∼ 6.2 pM vs Kd, Adnectin2 ∼ 46 nM). Furthermore, the study evaluates the resultant conformation/dynamic change of IL-6R. The suggested epitope, which is conserved for adnectin1 and adnectin2 binding, is a flexible loop that connects two β-strands in the cytokine-binding domain (DII) of IL-6R. We also found that adnectin1, the more strongly binding ligand, induces structural perturbations on two unstructured loops that are distally located beyond the epitope. Those changes are either attenuated or not detected for the case of adnectin2 binding. In addition to providing credibility in epitope determination, utilization of those combined approaches reveals the structural effects that can differentiate protein therapeutics with apparently similar biophysical properties.

A Retrospective Evaluation of the Use of Mass Spectrometry in FDA Biologics License Applications

The characterization sections of biologics license applications (BLAs) approved by the United States Food and Drug Administration (FDA) between 2000 and 2015 were investigated to examine the extent of the use of mass spectrometry. Mass spectrometry was found to be integral to the characterization of these biotherapeutics. Of the 80 electronically submitted monoclonal antibody and protein biotherapeutic BLAs included in this study, 79 were found to use mass spectrometric workflows for protein or impurity characterization. To further examine how MS is being used in successful BLAs, the applications were filtered based on the type and number of quality attributes characterized, the mass spectrometric workflows used (peptide mapping, intact mass analysis, and cleaved glycan analysis), the methods used to introduce the proteins into the gas phase (ESI, MALDI, or LC-ESI), and the specific types of instrumentation used. Analyses were conducted over a time course based on the FDA BLA approval to determine if any trends in utilization could be observed over time. Additionally, the different classes of protein-based biotherapeutics among the approved BLAs were clustered to determine if any trends could be attributed to the specific type of biotherapeutic. Graphical Abstract ᅟ.

Simultaneous monitoring of oxidation, deamidation, isomerization, and glycosylation of monoclonal antibodies by liquid chromatography-mass spectrometry method with ultrafast tryptic digestion

Monoclonal antibodies are subjected to a wide variety of post-translational modifications (PTMs) that cause structural heterogeneity. Characterization and control of these modifications or quality attributes are critical to ensure antibody quality and to define any potential effects on the ultimate safety and potency of antibody therapeutics. The biopharmaceutical industry currently uses numerous tools to analyze these quality attributes individually, which requires substantial time and resources. Here, we report a simple and ultrafast bottom-up liquid chromatography-mass spectrometry (uLC-MS) method with 5 min tryptic digestion to simultaneously analyze multiple modifications, including oxidation, deamidation, isomerization, glycation, glycosylation, and N-terminal pyro-glutamate formation, which can occur during antibody production in mammalian cell culture, during purification and/or on storage. Compared to commonly used preparation procedures, this uLC-MS method eliminates assay artifacts of falsely-increased Met oxidation, Asp isomerization, and Asn deamidation, a problem associated with long digestion times in conventional LC-MS methods. This simple, low artifact multi-attribute uLC-MS method can be used to quickly and accurately analyze samples at any stage of antibody drug development, in particular for clone and media selection during cell culture development.

Evaluation of Ion Mobility-Mass Spectrometry for Comparative Analysis of Monoclonal Antibodies

Analytical techniques capable of detecting changes in structure are necessary to monitor the quality of monoclonal antibody drug products. Ion mobility mass spectrometry offers an advanced mode of characterization of protein higher order structure. In this work, we evaluated the reproducibility of ion mobility mass spectrometry measurements and mobiligrams, as well as the suitability of this approach to differentiate between and/or characterize different monoclonal antibody drug products. Four mobiligram-derived metrics were identified to be reproducible across a multi-day window of analysis. These metrics were further applied to comparative studies of monoclonal antibody drug products representing different IgG subclasses, manufacturers, and lots. These comparisons resulted in some differences, based on the four metrics derived from ion mobility mass spectrometry mobiligrams. The use of collision-induced unfolding resulted in more observed differences. Use of summed charge state datasets and the analysis of metrics beyond drift time allowed for a more comprehensive comparative study between different monoclonal antibody drug products. Ion mobility mass spectrometry enabled detection of differences between monoclonal antibodies with the same target protein but different production techniques, as well as products with different targets. These differences were not always detectable by traditional collision cross section studies. Ion mobility mass spectrometry, and the added separation capability of collision-induced unfolding, was highly reproducible and remains a promising technique for advanced analytical characterization of protein therapeutics. Graphical Abstract ᅟ.

Characterization of antibody-drug conjugates by mass spectrometry: advances and future trends

Antibody-drug conjugates (ADCs) are emerging modalities in the pharmaceutical industry. The unique target-specific binding of antibody allows targeted delivery of cytotoxic small molecules to cancer cells, and thus expands the therapeutic window. However, in-depth characterization of ADCs is complex because it involves the characterization of antibody, conjugated molecules and antibody conjugates as a whole. In this review, we describe the practical use of mass spectrometry for ADC characterization including qualitative and quantitative analysis. Technical advances, limitations and future trends will also be discussed.

Global and Local Conformation of Human IgG Antibody Variants Rationalizes Loss of Thermodynamic Stability

Immunoglobulin G (IgG) monoclonal antibodies (mAbs) are a major class of medicines, with high specificity and affinity towards targets spanning many disease areas. The antibody Fc (fragment crystallizable) region is a vital component of existing antibody therapeutics, as well as many next generation biologic medicines. Thermodynamic stability is a critical property for the development of stable and effective therapeutic proteins. Herein, a combination of ion-mobility mass spectrometry (IM-MS) and hydrogen/deuterium exchange mass spectrometry (HDX-MS) approaches have been used to inform on the global and local conformation and dynamics of engineered IgG Fc variants with reduced thermodynamic stability. The changes in conformation and dynamics have been correlated with their thermodynamic stability to better understand the destabilising effect of functional IgG Fc mutations and to inform engineering of future therapeutic proteins.

Utility of Ion Mobility Mass Spectrometry for Drug-to-Antibody Ratio Measurements in Antibody-Drug Conjugates

Antibody-drug conjugates (ADCs) are emerging modalities in the pharmaceutical industry. Characterization of ADC's drug-to-antibody ratio (DAR) becomes a key assessment because of its importance in ADC efficacy and safety. DAR characterization by conventional intact protein MS analysis, however, is challenging because of high heterogeneity of ADC samples. The analysis often requires protein deglycosylation, disulfide-bond reduction, or partial fragmentation. In this study, we illustrate the practical utility of ion mobility mass spectrometry (IM-MS) in a routine LC/MS workflow for DAR measurements. This strategy allows analyte "cleanup" in the gas phase, providing significant improvement of signal-to-noise ratios of ADC intact mass spectra for accurate DAR measurements. In addition, protein drift time analysis offers a new dimension in monitoring the changes of DAR in lot-to-lot analysis.

Correlations between changes in conformational dynamics and physical stability in a mutant IgG1 mAb engineered for extended serum half-life

This study compares the local conformational dynamics and physical stability of an IgG1 mAb (mAb-A) with its corresponding YTE (M255Y/S257T/T259E) mutant (mAb-E), which was engineered for extended half-life in vivo. Structural dynamics was measured using hydrogen/deuterium (H/D) exchange mass spectrometry while protein stability was measured with differential scanning calorimetry (DSC) and size exclusion chromatography (SEC). The YTE mutation induced differences in H/D exchange kinetics at both pH 6.0 and 7.4. Segments covering the YTE mutation sites and the FcRn binding epitopes showed either subtle or no observable differences in local flexibility. Surprisingly, several adjacent segments in the CH2 and distant segments in the VH, CH1, and VL domains had significantly increased flexibility in the YTE mutant. Most notable among the observed differences is increased flexibility of the 244-254 segment of the CH2 domain, where increased flexibility has been shown previously to correlate with decreased conformational stability and increased aggregation propensity in other IgG1 mAbs (e.g., presence of destabilizing additives as well as upon de-glycosylation or methionine oxidation). DSC analysis showed decreases in both thermal onset (Tonset) and unfolding (Tm1) temperatures of 7°C and 6.7°C, respectively, for the CH2 domain of the YTE mutant. In addition, mAb-E aggregated faster than mAb-A under accelerated stability conditions as measured by SEC analysis. Hence, the relatively lower physical stability of the YTE mutant correlates with increased local flexibility of the 244-254 segment, providing a site-directed mutant example that this segment of the CH2 domain is an aggregation hot spot in IgG1 mAbs.

Hydrogen-deuterium exchange mass spectrometry for determining protein structural changes in drug discovery

Protein structures are dynamically changed in response to post-translational modifications, ligand or chemical binding, or protein-protein interactions. Understanding the structural changes that occur in proteins in response to potential candidate drugs is important for predicting the modes of action of drugs and their functions and regulations. Recent advances in hydrogen/deuterium exchange mass spectrometry (HDX-MS) have the potential to offer a tool for obtaining such understanding similarly to other biophysical techniques, such as X-ray crystallography and high resolution NMR. We present here, a review of basic concept and methodology of HDX-MS, how it is being applied for identifying the sites and structural changes in proteins following their interactions with other proteins and small molecules, and the potential of this tool to help in drug discovery.

Analyzing protein micro-heterogeneity in chicken ovalbumin by high-resolution native mass spectrometry exposes qualitatively and semi-quantitatively 59 proteoforms

Taking chicken Ovalbumin as a prototypical example of a eukaryotic protein we use high-resolution native electrospray ionization mass spectrometry on a modified Exactive Orbitrap mass analyzer to qualitatively and semiquantitatively dissect 59 proteoforms in the natural protein. This variety is largely induced by the presence of multiple phosphorylation sites and a glycosylation site that we find to be occupied by at least 45 different glycan structures. Mass analysis of the intact protein in its native state is straightforward and fast, requires very little sample preparation, and provides a direct view on the stoichiometry of all different coappearing modifications that are distinguishable in mass. As such, this proof-of-principal analysis shows that native electrospray ionization mass spectrometry in combination with an Orbitrap mass analyzer offers a means to characterize proteins in a manner highly complementary to standard bottom-up shot-gun proteome analysis.

Hydrogen/deuterium exchange mass spectrometry for probing higher order structure of protein therapeutics: methodology and applications

The higher order structure of protein therapeutics can be interrogated with hydrogen/deuterium exchange mass spectrometry (HDX-MS). HDX-MS is now a widely used tool in the structural characterization of protein therapeutics. In this review, HDX-MS based workflows designed for protein therapeutic discovery and development processes are presented, focusing on the specific applications of epitope mapping for protein/drug interactions and biopharmaceutical comparability studies. Future trends in the application of HDX-MS in protein therapeutics characterization are also described.

Top-down MS for rapid methionine oxidation site assignment in filgrastim

Protein therapeutics have emerged as a major new class of pharmaceuticals. One important shelf-life-limiting factor of biopharmaceuticals is methionine oxidation, and therefore, it is important that analytical methods are able to thoroughly characterize all possible oxidized variants. Here, we present a fast and sensitive method to perform online methionine oxidation site assignment using granulocyte colony-stimulating factor (filgrastim) as a model. The method is based on top-down MS using the all-ion fragmentation mode of the Exactive benchtop mass spectrometer. Conditions that provide information on the intact mass of the protein as well as on fragment ions that allow unambiguous site assignment of methionine oxidation in filgrastim variants as low as 0.12 % of total peak area in a chromatographic time scale were identified. Using this method, we performed methionine oxidation site assignment in H₂O₂-stressed filgrastim and in filgrastim which was stored at intended conditions, respectively. We show that the relative abundance of oxidation species observed in filgrastim stored under intended conditions differs strikingly from the oxidized species observed after H₂O₂ stress. Additionally, we report an oxidized filgrastim variant that has not been previously described in the literature.

Figure

High-resolution MS for structural characterization of protein therapeutics: advances and future directions

High-resolution MS (HRMS) is a central analytical technique for the study of biomolecules and is widely used in the biopharmaceutical industry. This paper reviews recent advances in commonly used HRMS instrumentation and experimental strategies for HRMS-based structural characterization of protein therapeutics. An overview of protein higher order structural characterization using HRMS-based technologies is presented, including the use of hydrogen/deuterium exchange and hydroxyl radical footprinting methods for probing protein conformational dynamics and interactions in solution. Future directions in application of HRMS for characterizing protein therapeutics are also described.

Platform dependencies in bottom-up hydrogen/deuterium exchange mass spectrometry

Hydrogen-deuterium exchange mass spectrometry is an important method for protein structure-function analysis. The bottom-up approach uses protein digestion to localize deuteration to higher resolution, and the essential measurement involves centroid mass determinations on a very large set of peptides. In the course of evaluating systems for various projects, we established two (HDX-MS) platforms that consisted of a FT-MS and a high-resolution QTOF mass spectrometer, each with matched front-end fluidic systems. Digests of proteins spanning a 20-110 kDa range were deuterated to equilibrium, and figures-of-merit for a typical bottom-up (HDX-MS) experiment were compared for each platform. The Orbitrap Velos identified 64% more peptides than the 5600 QTOF, with a 42% overlap between the two systems, independent of protein size. Precision in deuterium measurements using the Orbitrap marginally exceeded that of the QTOF, depending on the Orbitrap resolution setting. However, the unique nature of FT-MS data generates situations where deuteration measurements can be inaccurate, because of destructive interference arising from mismatches in elemental mass defects. This is shown through the analysis of the peptides common to both platforms, where deuteration values can be as low as 35% of the expected values, depending on FT-MS resolution, peptide length and charge state. These findings are supported by simulations of Orbitrap transients, and highlight that caution should be exercised in deriving centroid mass values from FT transients that do not support baseline separation of the full isotopic composition.

Capillary electrophoresis/mass spectrometry relevant to pharmaceutical and biotechnological applications

Advanced analytical techniques play a crucial role in the pharmaceutical and biotechnological field. In this context, capillary electrophoresis/mass spectrometry (CE/MS) has attracted attention due to efficient and selective separation in combination with powerful detection allowing identification and detailed characterization. Method developments and applications of CE/MS have been focused on questions not easily accessible by liquid chromatography/mass spectrometry (LC/MS) as the analysis of intact proteins, carbohydrates, and various small molecules, including peptides. Here, recent approaches and applications of CE/MS relevant to (bio)pharmaceuticals are reviewed and discussed to show actual developments and future prospects. Based on other reviews on related subjects covering large parts of previous works, the paper is focused on general ideas and contributions of the last 2 years; for the analysis of glycans, the period is extended back to 2006.

Biodistribution studies of nanoparticles using fluorescence imaging: a qualitative or quantitative method?

PURPOSE

The biodistribution of Lipid/Calcium/Phosphate (LCP) nanoparticles (NPs) in tumor-bearing mice was investigated using fluorescence imaging. A quantitative validation of this method was done by (3)H and (111)In labeling of the nanoparticles.

METHODS

The biodistribution of LCP NPs containing oligonucleotides was investigated using three different probes: Texas-Red labeled oligonucleotides, (3)H-labeled oligonucleotides, and (111)In-labled calcium phosphate.

RESULTS

A discrepancy was found between the radioactivity and the fluorescence signals. Signals from (3)H and (111)In exhibited very similar distribution patterns, suggesting that liver and spleen were the major accumulation sites. However, fluorescence imaging indicated that tumor accumulation was predominant. We further confirmed that the fluorescence signals in both liver and spleen were greatly attenuated compared with those in the tumor due to the intrinsic tissue absorption and scattering. Near-infrared (NIR) dye Cy5.5 also suffered from the same problem, in that the quantitative data from whole organs was dramatically affected by absorption and scattering properties of the tissue.

CONCLUSIONS

Careful attention must be paid to the quantification and interpretation of fluorescence imaging measurements when comparing different tissues.

Analytical tools for characterizing biopharmaceuticals and the implications for biosimilars

Biologics such as monoclonal antibodies are much more complex than small-molecule drugs, which raises challenging questions for the development and regulatory evaluation of follow-on versions of such biopharmaceutical products (also known as biosimilars) and their clinical use once patent protection for the pioneering biologic has expired. With the recent introduction of regulatory pathways for follow-on versions of complex biologics, the role of analytical technologies in comparing biosimilars with the corresponding reference product is attracting substantial interest in establishing the development requirements for biosimilars. Here, we discuss the current state of the art in analytical technologies to assess three characteristics of protein biopharmaceuticals that regulatory authorities have identified as being important in development strategies for biosimilars: post-translational modifications, three-dimensional structures and protein aggregation.

Analysis of host-cell proteins in biotherapeutic proteins by comprehensive online two-dimensional liquid chromatography/mass spectrometry

Assays for identification and quantification of host-cell proteins (HCPs) in biotherapeutic proteins over 5 orders of magnitude in concentration are presented. The HCP assays consist of two types: HCP identification using comprehensive online two-dimensional liquid chromatography coupled with high resolution mass spectrometry (2D-LC/MS), followed by high-throughput HCP quantification by liquid chromatography, multiple reaction monitoring (LC-MRM). The former is described as a "discovery" assay, the latter as a "monitoring" assay. Purified biotherapeutic proteins (e.g., monoclonal antibodies) were digested with trypsin after reduction and alkylation, and the digests were fractionated using reversed-phase (RP) chromatography at high pH (pH 10) by a step gradient in the first dimension, followed by a high-resolution separation at low pH (pH 2.5) in the second dimension. As peptides eluted from the second dimension, a quadrupole time-of-flight mass spectrometer was used to detect the peptides and their fragments simultaneously by alternating the collision cell energy between a low and an elevated energy (MSE methodology). The MSE data was used to identify and quantify the proteins in the mixture using a proven label-free quantification technique ("Hi3" method). The same data set was mined to subsequently develop target peptides and transitions for monitoring the concentration of selected HCPs on a triple quadrupole mass spectrometer in a high-throughput manner (20 min LC-MRM analysis). This analytical methodology was applied to the identification and quantification of low-abundance HCPs in six samples of PTG1, a recombinant chimeric anti-phosphotyrosine monoclonal antibody (mAb). Thirty three HCPs were identified in total from the PTG1 samples among which 21 HCP isoforms were selected for MRM monitoring. The absolute quantification of three selected HCPs was undertaken on two different LC-MRM platforms after spiking isotopically labeled peptides in the samples. Finally, the MRM quantitation results were compared with TOF-based quantification based on the Hi3 peptides, and the TOF and MRM data sets correlated reasonably well. The results show that the assays provide detailed valuable information to understand the relative contributions of purification schemes to the nature and concentrations of HCP impurities in biopharmaceutical samples, and the assays can be used as generic methods for HCP analysis in the biopharmaceutical industry.

Conformational comparability of factor IX-Fc fusion protein, factor IX, and purified Fc fragment in the absence and presence of calcium

A long lasting recombinant factor IX -Fc fusion protein (rFIX-Fc) is being developed for the treatment of hemophilia B and is currently in late stage clinical investigation. By limiting injection frequency and maintaining efficacy, rFIX-Fc shows promise as a new therapeutic option for hemophilia B patients. However, before gaining regulatory approval, rFIX-Fc must undergo rigorous analytical and biological testing, in addition to clinical trials. Included in this testing is the need to understand this protein's higher-order structure and dynamics. In this study, we investigated and compared the biophysical properties of rFIX-Fc, rFIX, and Fc using hydrogen/deuterium exchange mass spectrometry and differential scanning calorimetry. Within the limits of these techniques, our results show that structural comparability exists between rFIX and the FIX region of rFIX-Fc. In addition, changes in the structure and dynamics of both proteins, in response to calcium binding, a requirement for FIX function, are also highly comparable. In the case of Fc and Fc region of rFIX-Fc, conformational comparability is also established. These biophysical results further support the conclusion that fusing an immunoglobulin gamma 1 Fc to rFIX does not significantly alter the higher-order structure of FIX or Fc, Ca binding to FIX, or Fc functionality.