Recent insights into the impact, fate and transport of cerium oxide nanoparticles in the plant-soil continuum

Emerging concern of nano-pollution in agro-ecosystem: Flip side of nanotechnology

Nanomaterials (NMs) have proven to be a game-changer in agriculture, showcasing their potential to boost plant growth and safeguarding crops. The agricultural sector has widely adopted NMs, benefiting from their small size, high surface area, and optical properties to augment crop productivity and provide protection against various stressors. This is attributed to their unique characteristics, contributing to their widespread use in agriculture. Human exposure from various components of agro-environmental sectors (soil, crops) NMs residues are likely to upsurge with exposure paths may stimulates bioaccumulation in food chain. With the aim to achieve sustainability, nanotechnology (NTs) do exhibit its potentials in various domains of agriculture also have its flip side too. In this review article we have opted a fusion approach using bibliometric based analysis of global research trend followed by a holistic assessment of pros and cons i.e. toxicological aspect too. Moreover, we have also tried to analyse the current scenario of policy associated with the application of NMs in agro-environment.

Nano-CeO2 activates physical and chemical defenses of garlic (Allium sativum L.) for reducing antibiotic resistance genes in plant endosphere

The transmission of manure- and wastewater-borne antibiotic-resistant bacteria (ARB) to plants contributes to the proliferation of antimicrobial resistance in agriculture, necessitating effective strategies for preventing the spread of antibiotic resistance genes (ARGs) from ARB in the environment to humans. Nanomaterials are potential candidates for efficiently controlling the dissemination of ARGs. The present study investigated the abundance of ARGs in hydroponically grown garlic (Allium sativum L.) following nano-CeO2 (nCeO2) application. Specifically, root exposure to nCeO2 (1, 2.5, 5, 10 mg L-1, 18 days) reduced ARG abundance in the endosphere of bulbs and leaves. The accumulation of ARGs (cat, tet, and aph(3')-Ia) in garlic bulbs decreased by 24.2-32.5 % after nCeO2 exposure at 10 mg L-1. Notably, the lignification extent of garlic stem-disc was enhanced by 10 mg L-1 nCeO2, thereby accelerating the formation of an apoplastic barrier to impede the upward transfer of ARG-harboring bacteria to garlic bulbs. Besides, nCeO2 upregulated the gene expression related to alliin biosynthesis and increased allicin content by 15.9-16.2 %, promoting a potent antimicrobial defense for reducing ARG-harboring bacteria. The potential exposure risks associated with ARGs and Ce were evaluated according to the estimated daily intake (EDI). The EDI of ARGs exhibited a decrease exceeding 95 %, while the EDI of Ce remained below the estimated oral reference dose. Consequently, through stimulating physical and chemical defenses, nCeO2 contributed to a reduced EDI of ARGs and Ce, highlighting its potential for controlling ARGs in plant endosphere within the framework of nano-enabled agrotechnology.

Root-Applied Cerium Oxide Nanoparticles and Their Specific Effects on Plants: A Review

With the pronounced increase in nanotechnology, it is likely that biological systems will be exposed to excess nanoparticles (NPs). Cerium oxide nanoparticles (CeO2 NPs) are among the most abundantly produced nanomaterials in the world. Their widespread use raises fundamental questions related to the accumulation in the environment and further interactions with living organisms, especially plants. NPs present in either soil or soilless environments are absorbed by the plant root systems and further transported to the aboveground parts. After entering the cytoplasm, NPs interact with chloroplast, nucleus, and other structures responsible for metabolic processes at the cellular level. In recent years, several studies have shown the impact of nanoceria on plant growth and metabolic processes. Research performed on different plants has shown a dual role for CeO2 NPs. The observed effects can be positive or negative and strongly depend on the plant species, characterization, and concentrations of NPs. This review describes the impact of root-applied CeO2 NPs on plant growth, photosynthesis, metal homeostasis, and parameters of induced oxidative stress.

Nanotechnology in sustainable agriculture: A double-edged sword

Nanotechnology is a rapidly developing discipline that has the potential to transform the way we approach problems in a variety of fields, including agriculture. The use of nanotechnology in sustainable agriculture has gained popularity in recent years. It has various applications in agriculture, such as the development of nanoscale materials and devices to boost agricultural productivity, enhance food quality and safety, improve the efficiency of water and nutrient usage, and reduce environmental pollution. Nanotechnology has proven to be very beneficial in this field, particularly in the development of nanoscale delivery systems for agrochemicals such as pesticides, fertilizers, and growth regulators. These nanoscale delivery technologies offer various benefits over conventional delivery systems, including better penetration and distribution, enhanced efficacy, and lower environmental impact. Encapsulating agrochemicals in nanoscale particles enables direct delivery to the targeted site in the plant, thereby reducing waste and minimizing off-target effects. Plants are fundamental building blocks of all ecosystems and evaluating the interaction between nanoparticles (NPs) and plants is a crucial aspect of risk assessment. This critical review therefore aims to provide an overview of the latest advances regarding the positive and negative effects of nanotechnology in agriculture. It also explores potential future research directions focused on ensuring the safe utilization of NPs in this field, which could lead to sustainable development. © 2024 Society of Chemical Industry.

From lab to ecosystem: Understanding the ecological footprints of engineered nanoparticles

Nanotechnology has attained significant attention from researchers in past decades due to its numerous advantages, such as biocompatibility, biodegradability, and improved stability over conventional drug delivery systems. The fabrication of engineered nanoparticles (ENPs), including carbon nanotubes (CNTs), fullerenes, metallic and metal oxide-based NPs, has been steadily increasing day due to their wide range of applications from household to industrial applications. Fabricated ENPs can release different materials into the environment during their fabrication process. The effect of such materials on the environment is the primary concern with due diligence on the safety and efficacy of prepared NPs. In addition, an understanding of chemistry, reactivity, fabrication process, and viable mechanism of NPs involved in the interaction with the environment is very important. To date, only a limited number of techniques are available to assess ENPs in the natural environment which makes it difficult to ascertain the impact of ENPs in natural settings. This review extensively examines the environmental effects of ENPs and briefly discusses useful tools for determining NP size, surface charge, surface area, and external appearance. In conclusion, the review highlights the potential risks associated with ENPs and suggests possible solutions.

Cerium oxide nanoparticles alleviates stress in wheat grown on Cd contaminated alkaline soil

The cadmium contamination of soil is an alarming issue worldwide and among various mitigation strategies, nanotechnology mediated management of Cd contamination has become a well-accepted approach. The Cerium Oxide Nanoparticles (CeO2-NPs) are widely being explored for their novel works in Agro-Industry and Environment, including stress mitigation in crops. Very little work is reported regarding role of CeO2-NPs in management of Cd contamination in cereal crops like wheat. Present work was planned to check efficacy of CeO2-NPs in Cd stress mitigation of wheat under alkaline calcareous soil conditions. In this experiment, 4 sets of Cd contamination (Uncontaminated control-UCC, 10, 20, and 30 mg Cd per kg soil) and 5 sets of CeO2-NPs NPs (0, 200, 400, 600, and 1000 mg NP per kg soil) were applied in pots following completely randomized design (CRD) and wheat crop was grown. The growth, physiology, yield and Cd and Ce accumulation by wheat root, shoot and grain was monitored. The maximum Cd spiking level (30 mg kg-1) was found to be most toxic for plant growth. The results showed that the nanoparticles were overall beneficial for wheat growth and maximum level (1000 mg kg-1) being the most significant one under all Cd spiking sets. In Cd-30 sets, 1000 mg kg-1 NPs application resulted in decreased soil bioavailable Cd concentration (49.63% decrease compared to 30 mg kg-1 Cd spiked sets termed as Cd-30 Control), decreased Cd accumulation in all three tissues: root (58.36% decrease), shoot (52.30% decrease) and grain (55.56% decrease) while increased root dry weight (62.14%), shoot dry weight (89.32%), total grain yield (80.08%) and improved plant physiology with respect to Cd-30 control. Nanoparticles application substantially increased wheat root, shoot and grain Ce concentrations as well. The further prospects of these nanoparticles in relation to various biotic and abiotic stresses are advised to be explored.

Recent trends and perspectives in the application of metal and metal oxide nanomaterials for sustainable agriculture

Sustainable ecosystem management leads to the use of eco-friendly agricultural techniques for crop production. One of them is the use of metal and metal oxide nanomaterials and nanoparticles, which have proven to be a valuable option for the improvement of agricultural food systems. Moreover, the biological synthesis of these nanoparticles, from plants, bacteria, and fungi, also contributes to their eco-friendly and sustainable characteristics. Nanoparticles, which vary in size from 1 to 100 nm have a variety of mechanisms that are safer and more efficient than conventional fertilizers. Their usage as fertilizers and insecticides in agriculture is gaining favor in the scientific community to maximize crop output. More studies in this field will increase our understanding of this new technology and its broad acceptance in terms of performance, affordability, and environmental protection, as certain nanoparticles may outperform conventional fertilizers and insecticides. Accordingly, to the information gathered in this review, nanoparticles show remarkable potential for enhancing crop production, improving soil quality, and protecting the environment, however, metal and metal oxide NPs are not widely employed in agriculture. Many features of nanoparticles are yet left over, and it is necessary to uncover them. In this sense, this review article provides an overview of various types of metal and metal oxide nanoparticles used in agriculture, their characterization and synthesis, the recent research on them, and their possible application for the improvement of crop productivity in a sustainable manner.

Synthesis and characterization of CeO2 and SiO2 nanoparticles and their effect on growth parameters and the antioxidant defense system in Vigna mungo L. Hepper

Engineered nanoparticles (NPs) have recently attracted a lot of attention after being tested in various agricultural plants. This paper reports the green synthesis of CeO2 NPs and SiO2 NPs from leaf extracts of Nyctanthes arbor-tristis. The physical characteristics of the produced nanoparticles were then determined using UV-visible spectroscopy, transmission electron microscopy (TEM), fluorescence spectroscopy, and Fourier transform infrared spectroscopy (FTIR). Furthermore, the interaction effects of cerium oxide NPs (C1, C2, and C3) and silicon dioxide NPs (S1, S2, and S3) at 10 mg/L on blackgram (Vigna mungo L.) were evaluated. CeO2 and SiO2 NPs treatments enhanced the growth performance of the plants by causing a decrease in superoxide radical (SOR) and H2O2 via improving antioxidant enzymes. These findings imply that the size and shape of CeO2 and SiO2 NPs provide defense against oxidative damage to the blackgram.

Cerium Oxide Polishes Lithium Disilicate Glass Ceramic via a Chemical-Mechanical Process

OBJECTIVE

 The aim of the present study was to evaluate the chemical-mechanical polishing (CMP) effect of cerium oxide (ceria [CeO2]) as an abrasive to polish lithium disilicate glass ceramic.

MATERIALS AND METHODS

 For the polishing experiment, 22 lithium disilicate glass ceramic samples were prepared, polished with sandpaper using a polishing machine, their surface roughness (Ra) was measured using a profilometer, and they were randomly divided into two groups (n = 10). The samples were polished for 30 seconds with ceria paste with different ratios of deionized water:ceria by weight: 1:0.5 (C0.5) and 1:1 (C1) according to their group and the Ra values were determined. The Ra measurement was repeated after an additional 30 seconds of polishing until 120 seconds of polishing had been performed. The surface images of the postpolishing (120 seconds) samples were obtained using scanning electron microscopy (SEM) to evaluate the surface morphology. For the adsorption experiment, 10 lithium disilicate glass ceramic specimens were prepared and soaked in 50-mL deionized water. After 24 hours, the specimens were removed. Each liquid sample was divided in two halves. The first half was stored and ceria particles were added into the second half. After 24 hours, the solutions were filtered. The silicon concentration in the liquid samples was analyzed using inductively coupled plasma-optical emission spectrometry.

STATISTICAL ANALYSIS

 The difference in mean Ra value between groups was analyzed using two-way repeated analysis of variance (ANOVA) and the difference in mean silica concentrations before and after adding ceria particles was analyzed using the paired t-test. A p-value of <0.05 was considered statistically significant.

RESULTS

 Ra decreased as the ratio of ceria and polishing time increased. The surface morphology of the samples analyzed by SEM corresponded with their Ra values. The mean silicon concentration after adding ceria particles was significantly decreased (p < 0.05).

CONCLUSION

 Using a ceria-polishing paste to polish lithium disilicate glass ceramic generates a significantly smoother surface compared with baseline roughness. Moreover, CeO2 has a mechanical action and chemical reaction with lithium disilicate glass ceramic. Therefore, it can be used as a CMP paste to create a smooth surface.

Nano-based smart formulations: A potential solution to the hazardous effects of pesticide on the environment

Inefficient usage, overdose, and post-application losses of conventional pesticides have resulted in severe ecological and environmental issues, such as pesticide resistance, environmental contamination, and soil degradation. Advances in nano-based smart formulations are promising novel methods to decrease the hazardous impacts of pesticide on the environment. In light of the lack of a systematic and critical summary of these aspects, this work has been structured to critically assess the roles and specific mechanisms of smart nanoformulations (NFs) in mitigating the adverse impacts of pesticide on the environment, along with an evaluation of their final environmental fate, safety, and application prospects. Our study provides a novel perspective for a better understanding of the potential functions of smart NFs in reducing environmental pollution. Additionally, this study offers meaningful information for the safe and effective use of these nanoproducts in field applications in the near future.

Phytotoxicity and the molecular response in yttrium oxide nanoparticle-treated Arabidopsis thaliana seedlings

Due to the widespread application of rare earth oxide nanoparticles in various fields, their release into the environment is inevitable, and their potential toxicity and ecological impact have become a concern. Yttrium oxide nanoparticles are important rare earth oxide nanoparticles; however, their impact on plants and the molecular mechanism underlying their influence on plant growth and development are unclear. In this study, we found that yttrium oxide nanoparticles at concentrations exceeding 2 mM significantly inhibited the growth of Arabidopsis seedlings. Using Arabidopsis marker lines for auxin signaling, we found that the application of yttrium oxide nanoparticles resulted in disordered auxin signaling in root cells. Auxin signaling in the cells of the quiescent center and columella stem cells decreased, while auxin signaling in the cells of the stele was enhanced. In addition, trypan blue staining showed that yttrium oxide nanoparticles induced root cell death. Transcriptome analysis showed that the nanoparticles specifically inhibited the expression of lignin synthesis-related genes, activated the MAPK signaling pathway, and enhanced the ethylene and abscisic acid signaling pathways in plants. This study demonstrates the phytotoxicity of yttrium oxide nanoparticles at the molecular level in Arabidopsis, and it provides a new perspective on how plants respond to rare earth oxide stress.

Nanoparticles-Based Delivery Systems for Salicylic Acid as Plant Growth Stimulator and Stress Alleviation

The population growth tendency leads to an increase in demand for food products, and in particular, products obtained from the processing of plants. However, there are issues of biotic and abiotic stresses that can significantly reduce crop yields and escalate the food crisis. Therefore, in recent years, the development of new methods of plant protection became an important task. One of the most promising ways to protect plants is to treat them with various phytohormones. Salicylic acid (SA) is one of the regulators of systemic acquired resistance (SAR) signaling pathways. These mechanisms are able to protect plants from biotic and abiotic stresses by increasing the expression of genes that encode antioxidant enzymes. However, salicylic acid in high doses can act as an antagonist and have the negative rebound effect of inhibition of plant growth and development. To maintain optimal SA concentrations in the long term, it is necessary to develop systems for the delivery and slow release of SA in plants. The purpose of this review is to summarize and study methods of delivery and controlled release of SA in a plant. Various carriers-based nanoparticles (NPs) synthesized from both organic and inorganic compounds, their chemical structure, impacts on plants, advantages, and disadvantages are comprehensively discussed. The mechanisms of controlled release of SA and the effects of the use of the considered composites on the growth and development of plants are also described. The present review will be helpful to design or fabricate NPs and NPs-based delivery systems for salicylic acid-controlled release and better understating of the mechanism of SA-NPs interaction to alleviate stress on plants.

Divergent effects of cerium oxide nanoparticles alone and in combination with cadmium on nutrient acquisition and the growth of maize (Zea mays)

INTRODUCTION

The increasing use of cerium nanoparticles (CeO₂-NPs) has made their influx in agroecosystems imminent through air and soil deposition or untreated wastewater irrigation. Another major pollutant associated with anthropogenic activities is Cd, which has adverse effects on plants, animals, and humans. The major source of the influx of Cd and Ce metals in the human food chain is contaminated food, making it an alarming issue; thus, there is a need to understand the factors that can reduce the potential damage of these heavy metals.

METHODS

The present investigation was conducted to evaluate the effect of CeO₂-10-nm-NPs and Cd (alone and in combination) on Zea mays growth. A pot experiment (in sand) was conducted to check the effect of 0, 200, 400, 600, 1,000, and 2,000 mg of CeO₂-10 nm-NPs/kg^-1 dry sand alone and in combination with 0 and 0.5 mg Cd/kg^-1 dry sand on maize seedlings grown in a partially controlled greenhouse environment, making a total of 12 treatments applied in four replicates under a factorial design. Maize seedling biomass, shoot and root growth, nutrient content, and root anatomy were measured.

RESULTS AND DISCUSSION

The NPs were toxic to plant biomass (shoot and root dry weight), and growth at 2,000 ppm was the most toxic in Cd-0 sets. For Cd-0.5 sets, NPs applied at 1,000 ppm somewhat reverted Cd toxicity compared with the contaminated control (CC). Additionally, CeO₂-NPs affected Cd translocation, and variable Ce uptake was observed in the presence of Cd compared with non-Cd applied sets. Furthermore, CeO₂-NPs partially controlled the elemental content of roots and shoots (micronutrients such as B, Mn, Ni, Cu, Zn, Mo, and Fe and the elements Co and Si) and affected root anatomy.

Biological Nanofertilizers to Enhance Growth Potential of Strawberry Seedlings by Boosting Photosynthetic Pigments, Plant Enzymatic Antioxidants, and Nutritional Status

Strawberry production presents special challenges due the plants' shallow roots. The rooting stage of strawberry is a crucial period in the production of this important crop. Several amendments have been applied to support the growth and production of strawberry, particularly fertilizers, to overcome rooting problems. Therefore, the current investigation was carried out to evaluate the application of biological nanofertilizers in promoting strawberry rooting. The treatments included applying two different nanofertilizers produced biologically, nano-selenium (i.e., 25, 50, 75, and 100 mg L^-1) and nano-copper (i.e., 50 and 100 mg L^-1), plus a control (untreated seedlings). The rooting of strawberry seedlings was investigated by measuring the vegetative growth parameters (root weight, seedling weight, seedling length, and number of leaves), plant enzymatic antioxidants (catalase, peroxidase, and polyphenol oxidase activity), and chlorophyll content and its fluorescence and by evaluating the nutritional status (content of nutrients in the fruit and their uptake). The results showed that the applied nanofertilizers improved the growth, photosynthetic pigments, antioxidant content, and nutritional status of the seedlings compared to the control. A high significant increase in nutrient contents reached to more than 14-fold, 6-fold, 5-folf, and 4-fold for Cu, Mn, N, and Se contents, respectively, due to the applied nanofertilizers compared with the control. The result was related to the biological roles of both Se and CuO in activating the many plant enzymes. Comparing the Se with the CuO nanofertilizer, Cu had the strongest effect, which was shown in the higher values in all studied properties. This study showed that nanofertilizers are useful to stimulate strawberry seedling growth and most likely would also be beneficial for other horticultural crops. In general, the applied 100 ppm of biological nano-Se or nano-CuO might achieve the best growth of strawberry seedlings under growth conditions in greenhouses compared to the control. Along with the economic dimension, the ecological dimension of biological nanofertilizers still needs more investigation.

Mechanisms of cerium-induced stress in plants: A meta-analysis

A comprehensive evaluation of the effects of cerium on plants is lacking even though cerium is extensively applied to the environment. Here, the effects of cerium on plants were meta-analyzed using a newly developed database consisting of approximately 8500 entries of published data. Cerium affects plants by acting as oxidative stressor causing hormesis, with positive effects at low concentrations and adverse effects at high doses. Production of reactive oxygen species and its linked induction of antioxidant enzymes (e.g. catalase and superoxide dismutase) and non-enzymatic antioxidants (e.g. glutathione) are major mechanisms driving plant response mechanisms. Cerium also affects redox signaling, as indicated by altered GSH/GSSG redox pair, and electrolyte leakage, Ca²⁺, K⁺, and K⁺/Na⁺, indicating an important role of K⁺ and Na⁺ homeostasis in cerium-induced stress and altered mineral (ion) balance. The responses of the plants to cerium are further extended to photosynthesis rate (A), stomatal conductance (g_s), photosynthetic efficiency of PSII, electron transport rate, and quantum yield of PSII. However, photosynthesis response is regulated not only by physiological controls (e.g. g_s), but also by biochemical controls, such as via changed Hill reaction and RuBisCO carboxylation. Cerium concentrations <0.1-25 mg L^-1 commonly enhance chlorophyll a and b, g_s, A, and plant biomass, whereas concentrations >50 mg L^-1 suppress such fitness-critical traits at trait-specific concentrations. There was no evidence that cerium enhances yields. Observations were lacking for yield response to low concentrations of cerium, whereas concentrations >50 mg Kg^-1 suppress yields, in line with the response of chlorophyll a and b. Cerium affects the uptake and tissue concentrations of several micro- and macro-nutrients, including heavy metals. This study enlightens the understanding of some mechanisms underlying plant responses to cerium and provides critical information that can pave the way to reducing the cerium load in the environment and its associated ecological and human health risks.

Prediction models on biomass and yield of rice affected by metal (oxide) nanoparticles using nano-specific descriptors

The use of in silico tools to investigate the interactions between metal (oxide) nanoparticles (NPs) and plant biological responses is preferred because it allows us to understand molecular mechanisms and improve prediction efficiency by saving time, labor, and cost. In this study, four models (C5.0 decision tree, discriminant function analysis, random forest, and stepwise multiple linear regression analysis) were applied to predict the effect of NPs on rice biomass and yield. Nano-specific descriptors (size-dependent molecular descriptors and image-based descriptors) were introduced to estimate the behavior of NPs in plants to appropriately represent the wide space of NPs. The results showed that size-dependent molecular descriptors (e.g., E-state and connectivity indices) and image-based descriptors (e.g., extension, area, and minimum ferret diameter) were associated with the behavior of NPs in rice. The performance of the constructed models was within acceptable ranges (correlation coefficient ranged from 0.752 to 0.847 for biomass and from 0.803 to 0.905 for yield, while the accuracy ranged from 64% to 77% for biomass and 81% to 89% for yield). The developed model can be used to quickly and efficiently evaluate the impact of NPs under a wide range of experimental conditions and sufficient training data.

Size- and Ligand-Dependent Transport of Nanoparticles in Matricaria chamomilla as Demonstrated by Mass Spectroscopy and X-ray Fluorescence Imaging

Matricaria chamomilla flowers were incubated with gold nanoparticles of different sizes ranging from 1.4 to 94 nm. After different incubation times of 6, 12, 24, and 48 h, the gold distribution in the flowers was destructively measured by inductively coupled plasma mass spectrometry (ICP-MS) and non-destructively measured by X-ray fluorescence imaging (XFI) with high lateral resolution. As a control, the biodistribution of iodine ions or iodine-containing organic molecules (iohexol) was determined, in order to demonstrate the feasibility of mapping the distribution of several elements in parallel. The results show a clear size-dependent transport of the nanoparticles. In addition, the surface chemistry also plays a decisive role in disposition. Only the 1.6 nm nanoparticles coated with acetylcysteine could be efficiently transported through the stem of the flowers into the petals. In this case, almost 80% of the nanoparticles which were found within each flower were located in the petals. The study also highlights the potential of XFI for in situ recording of in vivo analyte biodistribution.

A comprehensive study of selenium and cerium oxide nanoparticles on mung bean: Individual and synergistic effect on photosynthesis pigments, antioxidants, and dry matter accumulation

In this study, the interaction effects of CeO₂ NPs (250, 500 and 1000 mg L^-1) and Se NPs (25, 50 and 75 mg L^-1) were evaluated in mung bean (Vigna radiata). Single NPs and their combinations were foliar applied to 45-day old mung bean plants under greenhouse conditions. In each pot, a total volume of 100 mL of NPs suspension was sprayed on the plants shoot in two steps and one-week interval. After 94 days of growth, membrane degradation, antioxidant activity, photosynthetic pigments, and dry matter accumulation were assessed. At 250 and 500 mg CeO₂-NPs L^-1, there was partial increase of dry matter, stimulated activity of antioxidant enzymes (p ≤ 0.05), and reactive oxygen species (ROS). However, at 1000 mg L^-1, CeO₂-NPs caused strong accumulation of ROS (p ≤ 0.05), enlargement of starch granules and swelling of chloroplasts. In addition, at such concentration, there was accumulation of starch granules, reduction of photosynthetic pigments, biological nitrogen fixation, chlorosis, and a significant retardation in plant growth, compared with control, (p ≤ 0.05). Combination of Se-NPs (25 and 50 mg L^-1) with 250 mg L^-1 of CeO₂ NPs decreased hydrogen peroxide, improved CAT, Chla, Chlb, and increased dry matter (p ≤ 0.05). At 1000 mg CeO₂ NPs L^-1, foliar spray of Se-NPs led to Ce accumulation in the cell wall and increased levels of SOD and proline (p ≤ 0.05). Results showed that 25 and 50 mg Se NPs L^-1 ameliorate the stress of CeO₂ NPs by upregulating photosynthesis pigments, antioxidants, and dry matter accumulation. Therefore, depending on the CeO₂ NPs concentration, the mechanisms of Se NPs in modulating CeO₂ NPs stress varied; low concentrations of Se NPs may strengthen the metabolism of legumes, and protect them against foliar toxicity of CeO₂ NPs in semi-arid ecosystems.

Nanoparticles as a potential protective agent for arsenic toxicity alleviation in plants

Aggrandized technological and industrial progression in past decades have occasioned immense depreciation in the quality of environment and ecosystem, majorly due to augmentation in the number of obnoxious pollutants incessantly being released in soil, water or air. Arsenic (As) is one such hazardous metalloid contaminating the environment which has the potential to detrimentally affect the life on earth. Even in minute quantity, As is known to cause various critical diseases in humans and toxicity in plants. Recent studies on nanoparticles (NPs) approve of their ability to qualify the criterion of becoming a potent tool for mitigating As-induced phytotoxicity. Nanoparticles are reported to promote plant growth under As-stress by stimulating various alterations at physiological, biochemical, and molecular levels. In this review, we provide an up-to-date compilation of research that has been carried out in comprehending the mechanisms utilized by nanoparticles including controlled As uptake and distribution in plants, maintenance of ROS homeostasis during stress and chelation and vacuolar sequestration of As so as to reduce the severity of toxicity induced by As, and potential areas of research in this field will also be indicated for future perspectives.

Advanced Functionalized CeO2/Al2O3 Nanocomposite Sensor for Determination of Opioid Medication Tramadol Hydrochloride in Pharmaceutical Formulations

BACKGROUND

The exceptional characteristics of cerium oxide (CeO₂) and aluminum oxide (Al₂O₃) nanoscales have inspired significant attention to those nanocomposites as possible electroactive resources for applications of sensing and biosensing.

METHODS

In this research, an innovative new factionalized CeO₂/Al₂O₃ nanocomposite membrane sensor was presented to assess tramadol hydrochloride (TRD) in marketable products.

RESULTS

Tramadol-phosphomolybdate (TRD-PM) was formed by mixing tramadol hydrochloride and phosphomolybdic acid (PMA) in the attendance of polymeric matrix and o-nitrophenyloctyl ether solvent mediator. With 1.0 × 10^-10-1.0 × 10^-2 mol L^-1 as a range of linearity and E_mV = (57.567 ± 0.2) log [TRD] + 676.29 as a regression equation, the functionalized sensor using TRD-PM-CeO₂/Al₂O₃ nanocomposite showed great selectivity and sensitivity for the discriminating and measurement of TRD. Using the regression equation E_mV = (52.143 ± 0.4) log [TRD] + 431.45, the unmodified coated wire sensor of TRD-PM, on the other hand, showed a Nernstian response between 1.0 × 10^-6 and 1.0 × 10^-2 mol L^-1, Using the methodology's specified guidelines, the proposed improved potentiometric system was validated against several criteria.

CONCLUSION

The suggested method is suitable for the determination of TRD in its products.

Effects of Metal Nanoparticles and Other Preparative Materials in the Environment on Plants: From the Perspective of Improving Secondary Metabolites

The influence of preparation material residues in wastewater and soil on plants has been paid more and more attention by researchers. Secondary metabolites play an important role in the application of plants. It was found that nanomaterials can increase the content of plant secondary metabolites in addition to their role in pharmaceutical preparations. For example, 800 mg/kg copper oxide nanoparticles (NPs) increased the content of p-coumaric acid in cucumber by 225 times. Nanoparticles can cause oxidative stress in plants, increase signal molecule, and upregulate the synthase gene expression, increasing the content of secondary metabolites. The increase of components such as polyphenols and total flavonoids may be related to oxidative stress. This paper reviews the application and mechanism of metal nanomaterials (Ag-NP, ZnO-NP, CeO₂-NP, Cds-NP, Mn-NP, CuO-NP) in promoting the synthesis of secondary metabolites from plants. In addition, the effects of some other preparative materials (cyclodextrins and immobilized molds) on plant secondary metabolites are also involved. Finally, possible future research is discussed.