Modelling the intradermal delivery of microneedle array patches for long-acting antiretrovirals using PBPK

Systemic delivery of bictegravir and tenofovir alafenamide using dissolving microneedles for HIV preexposure prophylaxis

Human immunodeficiency virus (HIV) continues to pose a serious threat to global health. Oral preexposure prophylaxis (PrEP), considered highly effective for HIV prevention, is the utilisation of antiretroviral (ARV) drugs before HIV exposure in high-risk uninfected individuals. However, ARV drugs are associated with poor patient compliance and pill fatigue due to their daily oral dosing. Therefore, an alternative strategy for drug delivery is required. In this work, two dissolving microneedle patches (MNs) containing either bictegravir (BIC) or tenofovir alafenamide (TAF) solid drug nanoparticles (SDNs) were developed for systemic delivery of a novel ARV regimen for potential HIV prevention. According to ex vivo skin deposition studies, approximately 11 % and 50 % of BIC and TAF was delivered using dissolving MNs, respectively. Pharmacokinetic studies in Sprague Dawley rats demonstrated that BIC MNs achieved a long-acting release profile, maintaining the relative plasma concentration above the 95 % inhibitory concentration (IC95) for 3 weeks. For TAF MNs, a rapid release of drug and metabolism of TAF into TFV were obtained from the plasma samples. This work has shown that the proposed transdermal drug delivery platform could be potentially used as an alternative method to systemically deliver ARV drugs for HIV PrEP.

The Phenomenon of Antiretroviral Drug Resistance in the Context of Human Immunodeficiency Virus Treatment: Dynamic and Ever Evolving Subject Matter

Human immunodeficiency virus (HIV) is a significant global health issue that affects a substantial number of individuals across the globe, with a total of 39 million individuals living with HIV/AIDS. ART has resulted in a reduction in HIV-related mortality. Nevertheless, the issue of medication resistance is a significant obstacle in the management of HIV/AIDS. The unique genetic composition of HIV enables it to undergo rapid mutations and adapt, leading to the emergence of drug-resistant forms. The development of drug resistance can be attributed to various circumstances, including noncompliance with treatment regimens, insufficient dosage, interactions between drugs, viral mutations, preexposure prophylactics, and transmission from mother to child. It is therefore essential to comprehend the molecular components of HIV and the mechanisms of antiretroviral medications to devise efficacious treatment options for HIV/AIDS.

Intradermal delivery of the antiretroviral drugs cabotegravir and rilpivirine by dissolving microarray patches: Investigation of lymphatic uptake

The lymphatic system possesses the main viral replication sites in the body following viral infection. Unfortunately, current antiretroviral agents penetrate the lymph nodes insufficiently when administered orally and, therefore, cannot access the lymphatic system sufficiently to interrupt this viral replication. For this reason, novel drug delivery systems aimed at enhancing the lymphatic uptake of antiretroviral drugs are highly desirable. Dissolving polymeric microarray patches (MAPs) may help to target the lymph intradermally. MAPs are intradermal drug delivery systems used to deliver many types of compounds. The present work describes a novel work investigating the lymphatic uptake of two anti-HIV drugs: cabotegravir (CAB) and rilpivirine (RPV) when delivered intradermally using dissolving MAPs containing nanocrystals of both drugs. Maps were formulated using NCs obtained by solvent-free milling technique. The polymers used to prepare the NCs of both drugs were PVA 10 Kda and PVP 58 Kda. Both NCs were submitted to the lyophilization process and reconstituted with deionized water to form the first layer of drug casting. Backing layers were developed for short application times and effective skin deposition. In vivo biodistribution profiles of RPV and CAB after MAP skin application were investigated and compared with the commercial intramuscular injection using rats. After a single application of RPV MAPs, a higher concentration of RPV was delivered to the axillary lymph nodes (AL) (Cmax 2466 ng/g - Tmax 3 days) when compared with RPV IM injection (18 ng/g - Tmax 1 day), while CAB MAPs delivered slightly lower amounts of drug to the AL (5808 ng/g in 3 days) when compared with CAB IM injection (9225 ng/g in 10 days). However, CAB MAPs delivered 7726 ng/g (Tmax 7 days) to the external lumbar lymph nodes, which was statistically equivalent to IM delivery (Cmax 8282 ng/g - Tmax 7 days). This work provides strong evidence that MAPs were able to enhance the delivery of CAB and RPV to the lymphatic system compared to the IM delivery route.

Advances in the transdermal delivery of antiretroviral drugs

Antiretroviral therapy regimens are successful in stopping the advancement of human immunodeficiency virus infection to acquired immunodeficiency syndrome, and other opportunistic infections. However, they do have significant disadvantages, including long-term treatment, limited oral bioavailability, inaccessibility to organs, non-adherence by patients, and the development of medication resistance. Because of the listed drawbacks of available routes and the availability of curative medicines for human immunodeficiency virus/acquired immunodeficiency syndrome, advanced solutions are required. Antiretroviral therapy transdermal delivery is one of the current strategies that have attracted much attention from many researchers. In this narrative review, various in vitro, in vivo, and ex vivo transdermal antiretroviral therapy delivery strategies were reviewed, such as transdermal patches and films, lipid-based nano-delivery systems, microneedles, chemical penetration enhancers, and iontophoresis, which showed promising results. Although the majority of studies on Antiretroviral transdermal delivery have produced hopeful findings, additional in-depth research on passive and physical enhancement techniques, both existing and new, is necessary to fully understand the potential of this route and to make it accessible to human immunodeficiency virus patients.

Physiologically Based Pharmacokinetic Modelling of Cabotegravir Microarray Patches in Rats and Humans

Microarray patches (MAPs) are currently under investigation as a self-administered, pain-free alternative used to achieve long-acting (LA) drug delivery. Cabotegravir is a potent antiretroviral that has demonstrated superior results over current pre-exposure prophylaxis (PrEP) regimens. This study aimed to apply physiologically based pharmacokinetic (PBPK) modelling to describe the pharmacokinetics of the dissolving bilayer MAP platform and predict the optimal dosing strategies for a once-weekly cabotegravir MAP. A mathematical description of a MAP was implemented into a PBPK model, and empirical models were utilised for parameter estimation. The intradermal PBPK model was verified against previously published in vivo rat data for intramuscular (IM) and MAP administration, and in vivo human data for the IM administration of LA cabotegravir. The verified model was utilised for the prediction of 300 mg, 150 mg and 75 mg once-weekly MAP administration in humans. Cabotegravir plasma concentrations >4 × protein-adjusted 90% inhibitory concentration (PA-IC90) (0.664 µg/mL) and >8 × PA-IC90 (1.33 µg/mL) were set as targets. The 75 mg, 150 mg and 300 mg once-weekly cabotegravir MAP regimens were predicted to sustain plasma concentrations >4 × PA-IC90, while the 300 mg and 150 mg regimens achieved plasma concentrations >8 × PA-IC90. These data demonstrate the potential for a once-weekly cabotegravir MAP using practical patch sizes for humans and inform the further development of cabotegravir MAPs for HIV PrEP.

Role of Modeling and Simulation in Preclinical and Clinical Long-Acting Injectable Drug Development

Innovations in the field of long-acting injectable drug development are increasingly being reported. More advanced in vitro and in vivo characterization can improve our understanding of the injection space and aid in describing the long-acting injectable (LAI) drug's behavior at the injection site more mechanistically. These innovations may enable unlocking the potential of employing a model-based framework in the LAI preclinical and clinical space. This review provides a brief overview of the LAI development process before delving deeper into the current status of modeling and simulation approaches in characterizing the preclinical and clinical LAI pharmacokinetics, focused on aqueous crystalline suspensions. A closer look is provided on in vitro release methods, available biopharmaceutical models and reported in vitro/in vivo correlations (IVIVCs) that may advance LAI drug development. The overview allows identifying the opportunities for use of model-informed drug development approaches and potential gaps where further research may be most warranted. Continued investment in improving our understanding of LAI PK across species through translational approaches may facilitate the future development of LAI drug products.

Long-acting microneedle formulations

The minimally-invasive and painless nature of microneedle (MN) application has enabled the technology to obviate many issues with injectable drug delivery. MNs not only administer therapeutics directly into the dermal and ocular space, but they can also control the release profile of the active compound over a desired period. To enable prolonged delivery of payloads, various MN types have been proposed and evaluated, including dissolving MNs, polymeric MNs loaded or coated with nanoparticles, fast-separable MNs hollow MNs, and hydrogel MNs. These intricate yet intelligent delivery platforms provide an attractive approach to decrease side effects and administration frequency, thus offer the potential to increase patient compliance. In this review, MN formulations that are loaded with various therapeutics for long-acting delivery to address the clinical needs of a myriad of diseases are discussed. We also highlight the design aspects, such as polymer selection and MN geometry, in addition to computational and mathematical modeling of MNs that are necessary to help streamline and develop MNs with high translational value and clinical impact. Finally, up-scale manufacturing and regulatory hurdles along with potential avenues that require further research to bring MN technology to the market are carefully considered. It is hoped that this review will provide insight to formulators and clinicians that the judicious selection of materials in tandem with refined design may offer an elegant approach to achieve sustained delivery of payloads through the simple and painless application of a MN patch.

Exploring user and stakeholder perspectives from South Africa and Uganda to refine microarray patch development for HIV PrEP delivery and as a multipurpose prevention technology

BACKGROUND

Oral HIV pre-exposure prophylaxis (PrEP) is highly effective, but alternative delivery options are needed to reach more users. Microarray patches (MAPs), a novel drug-delivery system containing micron-scale projections or "microneedles" that deliver drugs via skin, are being developed to deliver long-acting HIV PrEP and as a multipurpose prevention technology to protect from HIV and unintended pregnancy. We explored whether MAP technology could meet user and health system needs in two African countries.

METHODS

Researchers in South Africa and Uganda conducted 27 focus group discussions, 76 mock-use exercises, and 31 key informant interviews to explore perceptions about MAPs and specific features such as MAP size, duration of protection, delivery indicator, and health system fit. Participants included young women and men from key populations and vulnerable groups at high risk of HIV and/or unintended pregnancy, including adolescent girls and young women; female sex workers and men who have sex with these women; and men who have sex with men. In Uganda, researchers also recruited young women and men from universities and the community as vulnerable groups. Key stakeholders included health care providers, sexual and reproductive health experts, policymakers, and youth activists. Qualitative data were transcribed, translated, coded, and analyzed to explore perspectives and preferences about MAPs. Survey responses after mock-use in Uganda were tabulated to assess satisfaction with MAP features and highlight areas for additional refinement.

RESULTS

All groups expressed interest in MAP technology, reporting perceived advantages over other methods. Most participants preferred the smallest MAP size for ease of use and discreetness. Some would accept a larger MAP if it provided longer protection. Most preferred a protection duration of 1 to 3 months or longer; others preferred 1-week protection. Upper arm and thigh were the most preferred application sites. Up to 30 minutes of wear time was considered acceptable; some wanted longer to ensure the drug was fully delivered. Self-administration was valued by all groups; most preferred initial training by a provider.

CONCLUSIONS

Potential users and stakeholders showed strong interest in/acceptance of MAP technology, and their feedback identified key improvements for MAP design. If a MAP containing a high-potency antiretroviral or a MAP containing both an antiretroviral and hormonal contraceptive is developed, these products could improve acceptability/uptake of protection options in sub-Saharan Africa.

Revisiting the in-vitro and in-vivo considerations for in-silico modelling of complex injectable drug products

Complex injectable drug products (CIDPs) have often been developed to modulate the pharmacokinetics along with efficacy for therapeutic agents used for remediation of chronic disorders. The effective development of CIDPs has exhibited complex kinetics associated with multiphasic drug release from the prepared formulations. Consequently, predictability of pharmacokinetic modelling for such CIDPs has been difficult and there is need for advanced complex computational models for the establishment of accurate prediction models for in-vitro-in-vivo correlation (IVIVC). The computational modelling aims at supplementing the existing knowledge with mathematical equations to develop formulation strategies for generation of predictable and discriminatory IVIVC. Such an approach would help in reduction of the burden of effect of hidden factors on preclinical to clinical translations. Computational tools like physiologically based pharmacokinetics (PBPK) modelling have combined physicochemical and physiological properties along with IVIVC characteristics of clinically used formulations. Such techniques have helped in prediction and understanding of variability in pharmacodynamic parameters of potential generic products to clinically used formulations like Doxil®, Ambisome®, Abraxane® in healthy and diseased population using mathematical equations. The current review highlights the important formulation characteristics, in-vitro, preclinical in-vivo aspects which need to be considered while developing a stimulatory predictive PBPK model in establishment of an IVIVC and in-vitro-in-vivo relationship (IVIVR).

Advances and Prospects for Hydrogel-Forming Microneedles in Transdermal Drug Delivery

Transdermal drug delivery (TDD) is one of the key approaches for treating diseases, avoiding first-pass effects, reducing systemic adverse drug reactions and improving patient compliance. Microneedling, iontophoresis, electroporation, laser ablation and ultrasound facilitation are often used to improve the efficiency of TDD. Among them, microneedling is a relatively simple and efficient means of drug delivery. Microneedles usually consist of micron-sized needles (50-900 μm in length) in arrays that can successfully penetrate the stratum corneum and deliver drugs in a minimally invasive manner below the stratum corneum without touching the blood vessels and nerves in the dermis, improving patient compliance. Hydrogel-forming microneedles (HFMs) are safe and non-toxic, with no residual matrix material, high drug loading capacity, and controlled drug release, and they are suitable for long-term, multiple drug delivery. This work reviewed the characteristics of the skin structure and TDD, introduced TDD strategies based on HFMs, and summarized the characteristics of HFM TDD systems and the evaluation methods of HFMs as well as the application of HFM drug delivery systems in disease treatment. The HFM drug delivery system has a wide scope for development, but the translation to clinical application still has more challenges.

Current State and Opportunities with Long-acting Injectables: Industry Perspectives from the Innovation and Quality Consortium "Long-Acting Injectables" Working Group

Long-acting injectable (LAI) formulations can provide several advantages over the more traditional oral formulation as drug product opportunities. LAI formulations can achieve sustained drug release for extended periods of time, which results in less frequent dosing requirements leading to higher patient adherence and more optimal therapeutic outcomes. This review article will provide an industry perspective on the development and associated challenges of long-acting injectable formulations. The LAIs described herein include polymer-based formulations, oil-based formulations, and crystalline drug suspensions. The review discusses manufacturing processes, including quality controls, considerations of the Active Pharmaceutical Ingredient (API), biopharmaceutical properties and clinical requirements pertaining to LAI technology selection, and characterization of LAIs through in vitro, in vivo and in silico approaches. Lastly, the article includes a discussion around the current lack of suitable compendial and biorelevant in vitro models for the evaluation of LAIs and its subsequent impact on LAI product development and approval.

Development and Evaluation of Dissolving Microarray Patches for Co-administered and Repeated Intradermal Delivery of Long-acting Rilpivirine and Cabotegravir Nanosuspensions for Paediatric HIV Antiretroviral Therapy

PURPOSE

Whilst significant progress has been made to defeat HIV infection, the efficacy of antiretroviral (ARV) therapy in the paediatric population is often hindered by poor adherence. Currently, two long-acting (LA) intramuscular injectable nanosuspensions of rilpivirine (RPV) and cabotegravir (CAB) are in clinical development for paediatric populations. However, administration requires access to healthcare resources, is painful, and can result in needle-stick injuries to the end user. To overcome these barriers, this proof-of-concept study was developed to evaluate the intradermal delivery of RPV LA and CAB LA via self-disabling dissolving microarray patches (MAPs).

METHODS

Dissolving MAPs of two conformations, a conventional pyramidal and a bilayer design, were formulated, with various nanosuspensions of RPV and CAB incorporated within the respective MAP matrix. MAPs were mechanically robust and were capable of penetrating ex vivo skin with intradermal ARV deposition.

RESULTS

In a single-dose in vivo study in rats, all ARV MAPs demonstrated sustained release profiles, with therapeutically relevant plasma concentrations of RPV and CAB detected to at least 63 and 28 d, respectively. In a multi-dose in vivo study, repeated MAP applications at 14-d intervals maintained therapeutically relevant plasma concentrations throughout the duration of the study.

CONCLUSIONS

These results illustrate the potential of the platform to repeatedly maintain plasma concentrations for RPV and CAB. As such, these MAPs could represent a viable option to improve adherence in the paediatric population, one that is capable of being painlessly administered in the comfort of the patient's own home on a biweekly or less frequent basis.

Formulation of antiretroviral nanocrystals and development into a microneedle delivery system for potential treatment of HIV-associated neurocognitive disorder (HAND)

HIV/AIDS remains a major global public health issue. While antiretroviral therapy is effective at reducing the viral load in the blood, up to 50% of those with HIV suffer from some degree of HIV-associated neurocognitive disorder, due to the presence of the blood-brain barrier restricting drugs from crossing into the central nervous system and treating the viral reservoir there. One way to circumvent this is the nose-to-brain pathway. This pathway can also be accessed via a facial intradermal injection. Certain parameters can increase delivery via this route, including using nanoparticles with a positive zeta potential and an effective diameter of 200 nm or less. Microneedle arrays offer a minimally invasive, pain-free alternative to traditional hypodermic injections. This study shows the formulation of nanocrystals of both rilpivirine (RPV) and cabotegravir, followed by incorporation into separate microneedle delivery systems for application to either side of the face. Following an in vivo study in rats, delivery to the brain was seen for both drugs. For RPV, a C_max was seen at 21 days of 619.17 ± 73.32 ng/g, above that of recognised plasma IC90 levels, and potentially therapeutically relevant levels were maintained for 28 days. For CAB, a C_max was seen at 28 days of 478.31 ± 320.86 ng/g, and while below recognised 4IC90 levels, does indicate that therapeutically relevant levels could be achieved by manipulating final microaaray patch size in humans.

Coupled Diffusion-Binding-Deformation Modelling for Phase-Transition Microneedles-Based Drug Delivery

Phase-transition microneedles (PTMNs)-based transdermal drug delivery (TDD) is gaining popularity due to its non-invasiveness and ability to deliver a wide range of drugs. PTMNs absorb interstitial skin fluid (ISF) and transport drugs from microneedle (MNs) domain to the skin without polymer dissolution. To establish PTMNs for practical use, one needs to understand and optimise the key parameters governing drug transport mechanisms to achieve controlled drug delivery. In addressing this point, we have developed a coupled diffusion-binding-deformation model to understand the effect of physicochemical parameters (e.g., swelling capacity, drug binding) of MN and skin mechanical properties on overall drug transport behaviour. The contact mechanics at the MN and skin interface is introduced to account for the resistive force exerted by the deformed skin to MN swelling. The model is validated with the reported data of in vitro insulin delivery using polyvinyl alcohol (PVA) MN. The drug binding parameters are estimated from the fitting of the cumulative release of insulin within 6 hours of MN insertion. To predict the in vivo data of insulin delivery using the PVA MN, one-compartment model of drug pharmacokinetics is incorporated. It is shown in the paper that the model is able to predict the final insulin concentration in blood and in good agreement with the reported experimental data. The proposed model is concluded to be a tool for the predictive design and development of PTMNs-based TDD systems.

The LEAP Process: Streamlining the Development of Long-Acting Products and Formulations for Infectious Diseases

Developing long-acting products and formulations for infectious diseases is a nontrivial undertaking that is frequently classified as high risk and low reward by the pharmaceutical industry. The Long-Acting/Extended Release Antiretroviral Research Resource Program (LEAP) was founded in 2015 with the support of the National Institutes of Health to encourage, promote, and accelerate the development of such products. Assessment methodology for any new proposal brought to this group is part of a framework-the LEAP Process-that includes a landscape analysis of what is currently available in the public domain. This is followed by in silico modeling and simulation offered as a service to the relevant scientific community. A variety of preclinical and clinical outcome metrics are applied to each new agent as part of a continuous feedback loop to improve product characteristics. This allows us to catalog knowledge gaps and barriers that can be addressed by engaged stakeholders. Results are communicated in scientific articles, reviews, and position papers. This undertaking serves to de-risk discovery, development, and implementation by bridging the gaps between academic, regulatory, and industrial investigators, and by engaging those in the community who will be the eventual users of these medicines. The LEAP Process has supported formulations now approved for human immunodeficiency virus, as well as products in clinical and preclinical development for tuberculosis and hepatitis viruses B and C.

Long-acting HIV Pre-exposure Prophylaxis (PrEP) approaches: Recent advances, emerging technologies and development challenges

Introduction:

Poor or inconsistent adherence to daily oral pre-exposure prophylaxis (PrEP) has emerged as a key barrier to effective HIV prevention. The advent of potent long-acting (LA) antiretrovirals (ARVs) in conjunction with advances in controlled release technologies has enabled LA ARV drug delivery systems (DDS) capable of providing extended dosing intervals and overcome the challenge of suboptimal drug adherence with daily oral dosing.

Areas covered:

This review discusses the current state of the LA PrEP field, recent advances, and emerging technologies, including ARV prodrug modifications and new DDS. Technological challenges, knowledge gaps, preclinical testing considerations, and future directions important in the context of clinical translation and implementation of LA HIV PrEP are discussed.

Expert opinion:

The HIV prevention field is evolving faster than ever and the bar for developing next-generation LA HIV prevention options continues to rise. The requirements for viable LA PrEP products to be implemented in resource-limited settings are challenging, necessitating proactive consideration and product modifications during the design and testing of promising new candidates. If successfully translated, next-generation LA PrEP that are safe, affordable, highly effective, and accepted by both end-users and key stakeholders will offer significant potential to curb the HIV pandemic.

The future of long-acting agents for preexposure prophylaxis

PURPOSE OF REVIEW

The main reason for the failure of oral preexposure prophylaxis (PrEP) regimens for HIV is poor adherence. Intramuscular cabotegravir was recently approved for PrEP, and a number of other long-acting antiretroviral formulations and products are currently in clinical development. This includes subcutaneous and intravenous injections, implants, and microarray (microneedle) patches, as well as extended duration oral drugs. The success and future uptake of these products will depend on a variety of factors.

RECENT FINDINGS

Long-acting delivery of antiretroviral agents for PrEP confers significant advantages over short-acting oral delivery. This is exemplified by the superior efficacy of intramuscular cabotegravir given every eight weeks as compared to daily oral co-formulated tenofovir disoproxil fumarate and emtricitabine. There is also evidence for PrEP efficacy for a broadly neutralizing monoclonal antibody given intravenously every eight weeks. One of the leading candidates for long-acting PrEP, islatravir, was being studied as a monthly oral drug or a nonerodable subcutaneous implant inserted for up to 12 months. However, clinical studies of this agent were put on hold in late 2021 because of unanticipated lymphopenia.

SUMMARY

Long-acting antiretroviral products have substantial promise for PrEP and have particular advantages over daily oral drugs based mainly on improved adherence. However, there are barriers to further uptake that include the need for more intensive interaction with systems of healthcare delivery, greater expense and complexity of implementation, and unexpected long-term toxicities.

Super-swelling Hydrogel-forming Microneedle based Transdermal Drug Delivery: Mathematical Modelling, Simulation and Experimental Validation

Super-swelling hydrogel-forming microneedles (HFMNs) based transdermal drug delivery (TDD) is gaining significant interest due to their non-invasiveness and ability to deliver a wide range of drugs. The HFMNs swell by imbibing interstitial skin fluid (ISF), and they facilitate drug transport from the reservoir attached at the base into the skin without polymer dissolution. To develop HFMNs for practical applications, a complete understanding of the drug transport mechanism is required, allowing for controlled TDD and geometrical optimisation. A three-phase system consisting of a reservoir, microneedle, and skin is considered. A mathematical model is developed to incorporate the drug binding within the matrix of the compartment, which was not considered earlier. Super-swelling nature of the HFMNs is incorporated through the swelling ratio obtained experimentally for a polymer. The results are validated with in vitro diffusion studies of ibuprofen sodium (IBU) across excised porcine skin, showing that around 20% of the loaded IBU in lyophilised wafer was delivered in 24 hours. It was observed that increasing IBU solubility in reservoir can achieve high drug transport across the skin. The developed model is shown to be in good agreement with the experimental data. It is concluded that the proposed model can be considered a tool with predictive design and development of super-swelling HFMNs based TDD systems.

Physiologically based pharmacokinetic modeling of intravenously administered nanoformulated substances

The use of nanobiomaterials (NBMs) is becoming increasingly popular in the field of medicine. To improve the understanding on the biodistribution of NBMs, the present study aimed to implement and parametrize a physiologically based pharmacokinetic (PBPK) model. This model was used to describe the biodistribution of two NBMs after intravenous administration in rats, namely, poly(alkyl cyanoacrylate) (PACA) loaded with cabazitaxel (PACA-Cbz), and LipImage™ 815. A Bayesian parameter estimation approach was applied to parametrize the PBPK model using the biodistribution data. Parametrization was performed for two distinct dose groups of PACA-Cbz. Furthermore, parametrizations were performed three distinct dose groups of LipImage™ 815, resulting in a total of five different parametrizations. The results of this study indicate that the PBPK model can be adequately parametrized using biodistribution data. The PBPK parameters estimated for PACA-Cbz, specifically the vascular permeability, the partition coefficient, and the renal clearance rate, substantially differed from those of LipImage™ 815. This emphasizes the presence of kinetic differences between the different formulations and substances and the need of tailoring the parametrization of PBPK models to the NBMs of interest. The kinetic parameters estimated in this study may help to establish a foundation for a more comprehensive database on NBM-specific kinetic information, which is a first, necessary step towards predictive biodistribution modeling. This effort should be supported by the development of robust in vitro methods to quantify kinetic parameters.

Drug-Drug Interactions in People Living with HIV at Risk of Hepatic and Renal Impairment: Current Status and Future Perspectives

Despite the advancement of antiretroviral therapy (ART) for the treatment of human immunodeficiency virus (HIV), drug–drug interactions (DDIs) remain a relevant clinical issue for people living with HIV receiving ART. Antiretroviral (ARV) drugs can be victims and perpetrators of DDIs, and a detailed investigation during drug discovery and development is required to determine whether dose adjustments are necessary or coadministrations are contraindicated. Maintaining therapeutic ARV plasma concentrations is essential for successful ART, and changes resulting from potential DDIs could lead to toxicity, treatment failure, or the emergence of ARV‐resistant HIV. The challenges surrounding DDI management are complex in special populations of people living with HIV, and often lack evidence‐based guidance as a result of their underrepresentation in clinical investigations. Specifically, the prevalence of hepatic and renal impairment in people living with HIV are between five and 10 times greater than in people who are HIV‐negative, with each condition constituting approximately 15% of non‐AIDS‐related mortality. Therapeutic strategies tend to revolve around the treatment of risk factors that lead to hepatic and renal impairment, such as hepatitis C, hepatitis B, hypertension, hyperlipidemia, and diabetes. These strategies result in a diverse range of potential DDIs with ART. The purpose of this review was 2‐fold. First, to summarize current pharmacokinetic DDIs and their mechanisms between ARVs and co‐medications used for the prevention and treatment of hepatic and renal impairment in people living with HIV. Second, to identify existing knowledge gaps surrounding DDIs related to these special populations and suggest areas and techniques to focus upon in future research efforts.

Evaluating Islatravir Administered Via Microneedle Array Patch for Long-Acting HIV Pre-exposure Prophylaxis Using Physiologically Based Pharmacokinetic Modelling

BACKGROUND AND OBJECTIVES

Technologies for long-acting administration of antiretrovirals (ARVs) for the prevention and treatment of HIV are at the forefront of research initiatives aiming to tackle issues surrounding drug adherence with the current standard of once-daily oral administration. Islatravir (ISL) is an emerging ARV that shows promising characteristics for long-acting prevention and treatment both orally as well as through alternative routes of administration. Microneedle array patches (MAPs) are a pain-free and discreet transdermal delivery technology that offer extended-release administration of nanoparticulate drugs. This study aimed to utilise physiologically based pharmacokinetic (PBPK) modelling to predict the pharmacokinetics resulting from ISL administered via MAP and to identify key MAP characteristics required to sustain effective concentrations over extended dosing intervals.

METHODS

A PBPK model describing the conversion of ISL to ISL-triphosphate (ISL-TP) and its whole-body disposition was developed and verified against observed clinical data for orally administered ISL in healthy adults. An intradermal PBPK model was integrated with the ISL PBPK model to predict the dose and nanoparticle release rate required for MAP administration strategies capable of achieving a minimum ISL-TP target concentration of 0.05 pmol/10⁶ PBMCs over extended dosing intervals. MAP design was limited to a maximum therapeutic area of 20 cm² with a dose loading of 4.09 mg/cm² and a minimum duration of 3 months. Due to the lack of available clinical data, a range of nanoparticle release rates and MAP bioavailability scenarios were simulated to provide an overview of potential clinical outcomes.

RESULTS

The ISL PBPK model was successfully verified, with predicted vs observed ratios falling within 0.5-2-fold. ISL MAP doses ranging from 15 to 80 mg were predicted to sustain ISL-TP concentrations above the minimum target concentration at 3, 6 and 12 months after administration. Nanoparticle release rate and MAP bioavailability were found to have a major impact on whether dosing strategies achieved the criteria. Minimum doses of 15 mg and 60 mg with a nanoparticle release rate of 0.0005 h^-1 and bioavailability ranging from 25 to 100% were predicted to achieve effective ISL-TP concentrations up to 3 and 6 months, respectively. Doses of 15 mg and 30 mg with a nanoparticle release rate of 0.0005 h^-1 were also able to attain the target concentration up to 6 months after MAP administration, albeit with a minimum bioavailability of 75% and 50%, respectively. Furthermore, when simulating a bioavailability of 100%, an 80 mg ISL MAP was predicted to sustain ISL-TP concentrations above the minimum target concentration up to 12 months after administration.

CONCLUSIONS

The ISL PBPK model successfully predicted ISL and ISL-TP pharmacokinetics across a range of orally administered regimens. The integrated intradermal PBPK model outlined optimal MAP dose and nanoparticle release rates for effective ISL-TP concentrations up to 12 months, providing justification for further investigation of ISL as a candidate for MAP administration.

Microneedle-mediated transdermal nanodelivery systems: a review

The greatest limitation in the development of transdermal drug delivery systems is that only a few drugs can permeate the skin due to the barrier function of the stratum corneum. Active and passive methods are generally available for improving the ability of drug transdermal delivery. However, nanoparticles, as a passive approach, exhibit capacity-constrained permeation enhancement. Thus, microneedle-mediated nanoparticles possess enormous potential and broad prospects. Microneedles promote the penetration of macromolecules by creating microchannels on the skin surface. In this review, the prevailing subknowledge on microneedles (mechanism, classification, and applications of microneedles combined with nanoparticles) is discussed to provide a guideline for readers and a basic reference for further in-depth studies of this novel drug delivery system.

Long-Acting Injectable Antiretroviral Agents for HIV Treatment and Prevention

Current oral antiretroviral agents provide highly effective treatment for patients infected with human immunodeficiency virus (HIV), and can be used as pre-exposure prophylaxis (PrEP) to prevent new HIV infections. Several single-tablet regimens with excellent antiviral efficacy have dramatically improved the quality of life of patients who can adhere to daily oral therapy. However, there is increasing demand on long-acting injectable antiretroviral agents for patients who cannot take oral agents or feel fatigue related to daily pill burden. Monthly long-acting (LA) cabotegravir (CAB) combined with rilpivirine (RPV) has recently been listed as optimizing agent for maintenance of HIV suppression in treatment-experienced patients whose viral load is undetectable for 3 to 6 months. Novel agents with different mechanism of action and long half-life extending dosing interval are being tested in phase 2 and 3 clinical trials. This review summarizes the data of efficacies and safety profiles of LA CAB with RPV regimen, and also new long-acting injectable antiretroviral agents in pipeline.

Long-acting injectable HIV therapies: the next frontier

PURPOSE OF REVIEW

There has been significant development of long-acting injectable therapy for the management of HIV in recent years that has the potential to revolutionise HIV care as we know it. This review summarises the data and outlines the potential challenges in the field of long-acting antiretroviral therapy (ART).

RECENT FINDINGS

In recent years, monthly and two monthly long-acting injectable ART in the form of cabotegravir and rilpivirine has shown safety and efficacy in large-scale phase 3 randomised control trials. Also, agents with novel mechanisms of action, such as Lenacapavir, have been tested in early-phase studies and are currently being tested in phase 2-3 clinical trials; if successful, this may allow six-monthly dosing schedules.

SUMMARY

However, despite evidence that suggests that these therapies are efficacious and acceptable to patients, the challenge of integrating these agents into our current healthcare infrastructure and making these novel agents cost-effective and available to the populations most likely to benefit remains. The next frontier for long-acting therapy will be to introduce these agents in a real-world setting ensuring that the groups most in need of long-acting therapy are not left behind.

Microarray patches: Breaking down the barriers to contraceptive care and HIV prevention for women across the globe

Despite the existence of a variety of contraceptive products for women, as well as decades of research into the prevention and treatment of human immunodeficiency virus (HIV), there is still a globally unmet need for easily accessible, acceptable, and affordable products to protect women's sexual and reproductive health. Microarray patches (MAPs) are a novel platform being developed for the delivery of hormonal contraception and antiretroviral drugs. MAPs provide enhanced drug delivery to the systemic circulation via the transdermal route when compared to transdermal patches, oral and injectable formulations. These minimally invasive patches can be self-administered by the user, reducing the burden on health care personnel. Since MAPs represent needle-free drug delivery, no sharps waste is generated after application, thereby eliminating possible MAP reuse and risk of needle-stick injuries. This review discusses the administration of contraceptive and antiretroviral drugs using MAPs, their acceptability by end-users, and the future perspective of the field.

Long-acting injectable HIV therapies: the next frontier: Republication

PURPOSE OF REVIEW

There has been significant development of long-acting injectable therapy for the management of HIV in recent years that has the potential to revolutionise HIV care as we know it. This review summarises the data and outlines the potential challenges in the field of long-acting antiretroviral therapy (ART).

RECENT FINDINGS

In recent years, monthly and two monthly long-acting injectable ART in the form of cabotegravir and rilpivirine has shown safety and efficacy in large-scale phase 3 randomised control trials. Also, agents with novel mechanisms of action, such as Lenacapavir, have been tested in early-phase studies and are currently being tested in phase 2-3 clinical trials; if successful, this may allow six-monthly dosing schedules.

SUMMARY

However, despite evidence that suggests that these therapies are efficacious and acceptable to patients, the challenge of integrating these agents into our current healthcare infrastructure and making these novel agents cost-effective and available to the populations most likely to benefit remains. The next frontier for long-acting therapy will be to introduce these agents in a real-world setting ensuring that the groups most in need of long-acting therapy are not left behind.

Enhancement strategies for transdermal drug delivery systems: current trends and applications

Transdermal drug delivery systems have become an intriguing research topic in pharmaceutical technology area and one of the most frequently developed pharmaceutical products in global market. The use of these systems can overcome associated drawbacks of other delivery routes, such as oral and parenteral. The authors will review current trends, and future applications of transdermal technologies, with specific focus on providing a comprehensive understanding of transdermal drug delivery systems and enhancement strategies. This article will initially discuss each transdermal enhancement method used in the development of first-generation transdermal products. These methods include drug/vehicle interactions, vesicles and particles, stratum corneum modification, energy-driven methods and stratum corneum bypassing techniques. Through suitable design and implementation of active stratum corneum bypassing methods, notably microneedle technology, transdermal delivery systems have been shown to deliver both low and high molecular weight drugs. Microneedle technology platforms have proven themselves to be more versatile than other transdermal systems with opportunities for intradermal delivery of drugs/biotherapeutics and therapeutic drug monitoring. These have shown that microneedles have been a prospective strategy for improving transdermal delivery systems.

The Current Landscape of Novel Formulations and the Role of Mathematical Modeling in Their Development

Drug delivery is an integral part of the drug development process, influencing safety and efficacy of active pharmaceutical ingredients. The application of nanotechnology has enabled the discovery of novel formulations for numerous therapeutic purposes across multiple disease areas. However, evaluation of novel formulations in clinical scenarios is slow and hampered due to various ethical and logistical barriers. Computational models have the ability to integrate existing domain knowledge and mathematical correlations, to rationalize the feasibility of using novel formulations for safely enhancing drug delivery, identifying suitable candidates, and reducing the burden on preclinical and clinical studies. In this review, types of novel formulations and their application through several routes of administration and the use of modeling approaches that can find application in different stages of the novel formulation development process are discussed.

Long-acting drugs and formulations for the treatment and prevention of HIV infection

Long-acting and extended-release formulations represent one of the most important approaches to improving the treatment and prevention of chronic HIV infection. Long-acting small molecules and monoclonal antibodies have demonstrated potent anti-HIV activity in early- and late-stage clinical trials. Strategies to manage toxicity and falling drug concentrations after missed doses, as well as primary and secondary resistance to current drugs and monoclonal antibodies are important considerations. Long-acting injectable nanoformulations of the integrase inhibitor cabotegravir and the non-nucleoside reverse transcriptase inhibitor rilpivirine were safe, well tolerated and efficacious in large randomised phase 3 studies. Regulatory approval for this two-drug combination for HIV maintenance therapy was granted in Canada in 2020 and is expected in the USA during 2021. 4'-Ethynyl-2-fluoro-2'-deoxyadenosine (islatravir) is a novel nucleoside reverse transcriptase inhibitor in clinical development as a long-acting oral drug and as a long-acting subcutaneous polymer implant. GS-6207 is a novel HIV capsid inhibitor that is injected subcutaneously every 3 months. Broadly-neutralising monoclonal antibodies have potent antiviral activity in early human trials, however there is substantial baseline resistance and rapid development of resistance to these antibodies if used as monotherapy. Limitations of these antiretroviral approaches include management of toxicities and prevention of drug resistance when these drugs are discontinued and drug concentrations are slowly reduced over time. These approaches appear to be especially attractive for patients complaining of pill fatigue and for those experiencing HIV-associated stigma. As these formulations are shown to be safe, well tolerated and economical, they are likely to gain broader appeal.

Advances in Antimicrobial Microneedle Patches for Combating Infections

Skin infections caused by bacteria, viruses and fungi are difficult to treat by conventional topical administration because of poor drug penetration across the stratum corneum. This results in low bioavailability of drugs to the infection site, as well as the lack of prolonged release. Emerging antimicrobial transdermal and ocular microneedle patches have become promising medical devices for the delivery of various antibacterial, antifungal, and antiviral therapeutics. In the present review, skin anatomy and its barriers along with skin infection are discussed. Potential strategies for designing antimicrobial microneedles and their targeted therapy are outlined. Finally, biosensing microneedle patches associated with personalized drug therapy and selective toxicity toward specific microbial species are discussed.

Mathematical Modelling, Simulation and Optimisation of Microneedles for Transdermal Drug Delivery: Trends and Progress

In the last two decades, microneedles (MNs) have received significant interest due to their potential for painless transdermal drug delivery (TDD) and minimal skin damage. MNs have found applications in a range of research and development areas in drug delivery. They have been prepared using a variety of materials and fabrication techniques resulting in MN arrays with different dimensions, shapes, and geometries for delivery of a variety of drug molecules. These parameters play crucial roles in determining the drug release profiles from the MNs. Developing mathematical modelling, simulation, and optimisation techniques is vital to achieving the desired MN performances. These will then be helpful for pharmaceutical and biotechnological industries as well as professionals working in the field of regulatory affairs focusing on MN based TDD systems. This is because modelling has a great potential to reduce the financial and time cost of both the MNs' studies and manufacturing. For example, a number of robust mathematical models for predicting the performance of the MNs in vivo have emerged recently which incorporate the roles of the structural and mechanical properties of the skin. In addressing these points, this review paper aims to highlight the current status of the MN modelling research, in particular, the modelling, simulation and optimisation of the systems for drug delivery. The theoretical basis for the simulation of MN enhanced diffusion is discussed within this paper. Thus, this review paper provides a better understanding of the modelling of the MN mediated drug delivery process.

Recent advances in long-acting nanoformulations for delivery of antiretroviral drugs

In spite of introduction of combination antiretroviral therapy (cART) against human immunodeficiency virus (HIV) infection; inaccessibility and poor adherence to oral cART costs 10 in 100,000 death worldwide. Failure in adherence leads to viral rebound, emergence of drug resistance and anticipated HIV infection in high risk individuals. Various Long-acting antiretroviral (LA ARV) nanoformulations including nano-prodrug, solid drug nanoparticles (SDN), nanocrystals, aspherical nanoparticles, polymeric and lipidic nanoparticles have shown plasma/tissue drug concentration in the therapeutic range for several weeks during pre-clinical evaluation. LA ARV nanoformulations therefore have replaced cART as better alternative for the treatment of HIV infection. Cabenuva™ is recently approved by Health Canada containing LA cabotegravir+LA rilpivirine nanocrystals (ViiV healthcare) for once monthly administration by intramuscular route. The LA nanoformulation due to its nanosize insist on better stability, delivery to lymphatic, slow release into systemic circulation via lymphatic-circulatory system conjoint and secondary drug depot within infiltered immune cells at site of administration and systemic circulation in contrast to conventional drugs. However, the pharmacokinetic, biodistribution and efficacy of LA nanoformulations hinge onto physicochemical properties of the drugs and route of administration. Therefore, current review emphasizes on these contradistinctive factors that affects the reproducibility, safety, efficacy and toxicity of LA anti-HIV nanoformulations. Moreover, it expatiates on application of profuse nanoformulations for long-acting effect with promising preclinical discoveries and two clinical leads. To add on, utilization of physiology-based and mechanism-based pharmacokinetic modelling and in vivo animal models which could lead to enhanced safety and efficacy of LA ARV nanoformulations in humans have been included.